summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
...
| * [BNX2]: Disable parallel detect on an HP blade.Michael Chan2008-02-242-1/+14
| | | | | | | | | | | | | | | | | | Because of some board issues, we need to disable parallel detect on an HP blade. Without this patch, the link state can become stuck when it goes into parallel detect mode. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [BNX2]: More 5706S link down workaround.Michael Chan2008-02-241-15/+17
| | | | | | | | | | | | | | | | | | The previous patches to workaround the 5706S on an HP blade were not sufficient. The link state still does not change properly in some cases. This patch adds polling to make it completely reliable. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ssb: Fix support for PCI devices behind a SSB->PCI bridgeMichael Buesch2008-02-211-5/+12
| | | | | | | | | | | | | | | | We must pin all resources and make sure the PCI subsystem won't relocate us, as the addresses are hardwired into hardware. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * zd1211rw: fix sparse warningsJohannes Berg2008-02-211-3/+9
| | | | | | | | | | | | | | This silences sparse when run on zd1211rw. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtl818x: fix sparse warningsJohannes Berg2008-02-212-2/+6
| | | | | | | | | | | | | | | | This silences a few sparse warnings. There are two more where I can't follow the code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ssb: Fix pcicore cardbus modeMichael Buesch2008-02-212-2/+27
| | | | | | | | | | | | | | | | This fixes the pcicore driver to not die a horrible crash death when inserting a cardbus card. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ssb: Make the GPIO API reentrancy safeMichael Buesch2008-02-214-11/+109
| | | | | | | | | | | | | | This fixes the GPIO API to be reentrancy safe. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ssb: Fix the GPIO APIMichael Buesch2008-02-212-10/+49
| | | | | | | | | | | | | | This fixes the GPIO API to be usable. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ssb: Fix watchdog access for devices without a chipcommonMichael Buesch2008-02-214-0/+39
| | | | | | | | | | | | | | | | This fixes the SSB watchdog access for devices without a chipcommon. These devices have the watchdog on the extif. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ssb: Fix serial console on new bcm47xx devicesMichael Buesch2008-02-211-5/+31
| | | | | | | | | | | | | | | | This fixes the baud settings for new devices like the Linksys WRT350n. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: Fix build warnings on some 64-bit platforms.David Miller2008-02-211-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | 'u64' is not necessarily 'unsigned long long' drivers/net/wireless/ath5k/base.c: In function 'ath5k_beacon_update_timers': drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/ath5k/base.c: In function 'ath5k_intr': drivers/net/wireless/ath5k/base.c:2391: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * WDEV, ath5k, don't return int from bool functionJiri Slaby2008-02-213-6/+9
| | | | | | | | | | | | | | | | | | | | | | sparse sees int -> bool cast as an error: hw.c:3754:10: warning: cast truncates bits from constant value (ffffffea becomes 0) Fix it by converting the rettype to int and check appropriately. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * WDEV: ath5k, fix lock imbalanceJiri Slaby2008-02-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Omitted lock causes sparse warning drivers/net/wireless/ath5k/base.c:1682:1: warning: context imbalance in 'ath5k_tasklet_rx' - different lock contexts for basic block Add the lock to the guilty fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * p54usb: add USB ID for Linksys WUSB54G ver 2John W. Linville2008-02-201-0/+1
| | | | | | | | | | | | | | | | | | Based on report from Cavan Carroll <cavancarroll@hotmail.com>: http://bugzilla.kernel.org/show_bug.cgi?id=9863 Cc: Cavan Carroll <cavancarroll@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * p54usb: add USB ID for Phillips CPWUA054Ivo Couckuyt2008-02-201-0/+1
| | | | | | | | | | | | | | | | | | Retarget of an old patch against prism54usb in linux-wireless archive: http://marc.info/?l=linux-wireless&m=117449935810254&w=2 Cc: Ivo Couckuyt <iv0co@yahoo.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * veth: fix dev refcount raceDaniel Lezcano2008-02-201-13/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When deleting the veth driver, veth_close calls netif_carrier_off for the two extremities of the network device. netif_carrier_off on the peer device will fire an event and hold a reference on the peer device. Just after, the peer is unregistered taking the rtnl_lock while the linkwatch_event is scheduled. If __linkwatch_run_queue does not occurs before the unregistering, unregister_netdevice will wait for the dev refcount to reach zero holding the rtnl_lock and linkwatch_event will wait for the rtnl_lock and hold the dev refcount. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NIU]: More BMAC alt MAC address fixes.Matheos Worku2008-02-202-5/+6
| | | | | | | | | | | | | | | | | | | | | | From: Matheos Worku <Matheos.Worku@Sun.COM> 1) niu_enable_alt_mac() needs to be adjusted so that the mask is computed properly for the BMAC case. 2) BMAC has 6 alt MAC addresses available, not 7. Signed-off-by: David S. Miller <davem@davemloft.net>
* | Fix u132-hcd.c compile errorMirco Tischler2008-02-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following compile error caused by commit 3a2d5b700132f35401f1d9e22fe3c2cab02c2549 ("PM: Introduce PM_EVENT_HIBERNATE callback state") CC [M] drivers/usb/host/u132-hcd.o drivers/usb/host/u132-hcd.c: In function ‘u132_suspend’: drivers/usb/host/u132-hcd.c:3224: error: expected expression before ‘int’ drivers/usb/host/u132-hcd.c:3225: error: ‘ports’ undeclared (first use in this function) ... Signed-off-by: Mirco Tischler <mt-ml@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | fix vmsas.c file permissionsOliver Pinter2008-02-241-0/+0
| | | | | | | | | | Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | mvsas: fix build warning, clean prototypesJeff Garzik2008-02-241-12/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | - Fix build 'make randconfig' build warning spotted by Toralf Foerster: drivers/scsi/mvsas.c: In function 'mvs_hexdump': drivers/scsi/mvsas.c:715: error: implicit declaration of function 'isalnum' - Remove unneeded prototypes (spotted by hch) Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | dmi: prevent linked list corruptionJean Delvare2008-02-241-7/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding the same item to a given linked list more than once is guaranteed to break and corrupt the list. This is however what we do in dmi_scan since commit 79da4721117fcf188b4b007b775738a530f574da ("x86: fix DMI out of memory problems"). Given that there is absolutely no interest in saving empty OEM strings anyway, I propose the simple and efficient fix below: we discard the empty OEM strings altogether. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Parag Warudkar <parag.warudkar@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/video/uvesafb.c: fix section mismatch warning in param_set_scroll()Sergio Luis2008-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following warnings: WARNING: drivers/video/built-in.o(.text+0x7c64a): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/video/built-in.o(.text+0x7c65d): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/video/built-in.o(.text+0x7c679): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/video/built-in.o(.text+0x7c699): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/video/built-in.o(.text+0x7c69f): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/built-in.o(.text+0xa3676): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/built-in.o(.text+0xa3689): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/built-in.o(.text+0xa36a5): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/built-in.o(.text+0xa36c5): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: drivers/built-in.o(.text+0xa36cb): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: vmlinux.o(.text+0x4a079a): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: vmlinux.o(.text+0x4a07ad): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: vmlinux.o(.text+0x4a07c9): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: vmlinux.o(.text+0x4a07e9): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan WARNING: vmlinux.o(.text+0x4a07ef): Section mismatch in reference from the function param_set_scroll() to the variable .devinit.data:ypan Remove __devinitdata annotation from the variable ypan. Signed-off-by: Sergio Luis <sergio@larces.uece.br> Cc: Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | NBD: make nbd default to deadline I/O schedulerPaul Clements2008-02-241-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NBD doesn't work well with CFQ (or AS) schedulers, so let's default to something else. The two problems I have experienced with nbd and cfq are: 1) nbd hangs with cfq on RHEL 5 (2.6.18) -- this may well have been fixed There's a similar debian bug that has been filed as well: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=447638 There have been posts to nbd-general mailing list about problems with cfq and nbd also. 2) nbd performs about 10% better (the last time I tested) with deadline vs. cfq (the overhead of cfq doesn't provide much advantage to nbd [not being a real disk], and you end up going through the I/O scheduler on the nbd server anyway, so it makes sense that deadline is better with nbd) Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | dmi: don't save the same device twiceJean Delvare2008-02-241-30/+44
| | | | | | | | | | | | | | | | | | | | | | | | Now that we gather on-board devices from both DMI types 10 and 41, there is a possibility that we list the same device twice. In order to not confuse drivers, and also to save memory, make sure that we do not add duplicate devices to the dmi_devices list. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | rtc-cmos: display HPET emulation modeDavid Brownell2008-02-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the "cmos" RTC, have /proc/driver/rtc say whether HPET based IRQ emulation is in effect. Given the problems we've had with this particular hardware maldesign (and the fact that most BIOS code seems not to provide the IRQ routing needed to use the saner HPET modes), this should help troubleshooting. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | spi: pxa2xx_spi clock polarity fixNed Forrester2008-02-241-14/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes a sequencing bug in spi driver pxa2xx_spi.c in which the chip select for a transfer may be asserted before the clock polarity is set on the interface. As a result of this bug, the clock signal may have the wrong polarity at transfer start, so it may need to make an extra half transition before the intended clock/data signals begin. (This probably means all transfers are one bit out of sequence.) This only occurs on the first transfer following a change in clock polarity in systems using more than one more than one such polarity. The fix assures that the clock mode is properly set before asserting chip select. This bug was introduced in a patch merged on 2006/12/10, kernel 2.6.20. The patch defines an additional bit in: include/asm-arm/arch-pxa/regs-ssp.h for 2.6.25 and newer kernels but this addition must be made in: include/asm-arm/arch-pxa/pxa-regs.h for kernels between 2.6.20 and 2.6.24, inclusive Signed-off-by: Ned Forrester <nforrester@whoi.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | atmel_spi: fix clock polarityAtsushi Nemoto2008-02-241-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The atmel_spi driver does not initialize clock polarity correctly (except for at91rm9200 CS0 channel) in some case. The atmel_spi driver uses gpio-controlled chipselect. OTOH spi clock signal is controlled by CSRn.CPOL bit, but this register controls clock signal correctly only in 'real transfer' duration. At the time of cs_activate() call, CSRn.CPOL will be initialized correctly, but the controller do not know which channel is to be used next, so clock signal will stay at the inactive state of last transfer. If clock polarity of new transfer and last transfer was differ, new transfer will start with wrong clock signal state. For example, if you started SPI MODE 2 or 3 transfer after SPI MODE 0 or 1 transfer, the clock signal state at the assertion of chipselect will be low. Of course this will violates SPI transfer. This patch is short term solution for this problem. It makes all CSRn.CPOL match for the transfer before activating chipselect. For longer term, the best fix might be to let NPCS0 stay selected permanently in MR and overwrite CSR0 with to the new slave's settings before asserting CS. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | atmel_serial: fix interrupt handler return valueHaavard Skinnemoen2008-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | We should only return IRQ_HANDLED when we actually found something to handle. This is important since the USART interrupt handler may be shared with the timer interrupt on some chips. Pointed-out-by: michael <trimarchi@gandalf.sssup.it> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | copyright owner and author clean up for intel iommu and related filesmark gross2008-02-245-11/+16
| | | | | | | | | | | | | | | | | | | | The following is a clean up and correction of the copyright holding entities for the files associated with the intel iommu code. Signed-off-by: <mgross@linux.intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2008-02-2326-183/+3184
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (25 commits) [SCSI] qlogicpt: section fixes [SCSI] mvsas: convert from rough draft to working driver [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver [SCSI] libsas: correctly flush the LU queue on error recovery [SCSI] aic94xx: fix sequencer hang on error recovery [SCSI] st: compile fix when DEBUG set to one [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccb [SCSI] stex: stex_direct_copy shouldn't call dma_map_sg [SCSI] lpfc: Balance locking [SCSI] qla4xxx: fix up residual handling [SCSI] libsas: fix error handling [SCSI] arcmsr: fix message allocation [SCSI] mptbase: fix use-after-free's [SCSI] iscsi transport: make 2 functions static [SCSI] lpfc: make lpfc_disable_node() static [SCSI] ips: fix data buffer accessors conversion bug [SCSI] gdth: don't call pci_free_consistent under spinlock [SCSI] qla2xxx: fix compile warning for printk format [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panic [SCSI] scsi_debug: disable clustering ...
| * | [SCSI] qlogicpt: section fixesAdrian Bunk2008-02-231-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | In current mainline, __devinit qpti_sbus_probe() still is calling __init qpti_chain_add(). Change occurrences of __init to __devinit to fix. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] mvsas: convert from rough draft to working driverKe Wei2008-02-231-313/+1469
| | | | | | | | | | | | | | | | | | | | | | | | Convert rough draft Marvell 6440 driver to a working driver. Added support for SAS and SATA devices, hotplug, wide port, and expanders. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] mvsas: Add Marvell 6440 SAS/SATA driverJeff Garzik2008-02-233-0/+1836
| | | | | | | | | | | | | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] libsas: correctly flush the LU queue on error recoveryJames Bottomley2008-02-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The current sas_scsi_clear_queue_lu() is wrongly checking for commands which match the pointer to the one passed in. It should be checking for commands which are on the same logical unit as the one passed in. Fix this by checking target pointer and LUN for equality. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] aic94xx: fix sequencer hang on error recoveryJames Bottomley2008-02-231-4/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clear nexus I_T and clear nexus I_T_L functions in the aic94xx specify the SUSPEND_TX flag which causes the sequencer to be suspended until it receives a RESUME_TX. Unfortunately, nothing ever sends the resume, so the sequencer on the link is stopped forever, leading to eventual timeouts and I/O errors. Since clear nexus commands are only executed as part of error recovery, it's perfectly fine to keep the sequencer running on the link ... as soon as the recovery function is completed, we'll send it the commands to retry. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] st: compile fix when DEBUG set to oneKai Makisara2008-02-232-8/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | Remove the now useless counting of adjacent pages from the debugging code in to make it compile when DEBUG is set non-zero. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccbFUJITA Tomonori2008-02-231-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stex_internal_copy copies an in-kernel buffer to a sg list by using scsi_kmap_atomic_sg. Some functions calls stex_internal_copy with sg_count in struct st_ccb, which is the value that dma_map_sg returned. However it might be shorter than the actual number of sg entries (if the IOMMU merged the sg entries). scsi_kmap_atomic_sg doesn't see sg->dma_length so stex_internal_copy should be called with the actual number of sg entries (i.e. scsi_sg_count), because if the sg entries were merged, stex_direct_copy wrongly think that the data length in the sg list is shorter than the actual length. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] stex: stex_direct_copy shouldn't call dma_map_sgFUJITA Tomonori2008-02-231-22/+12Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stex_direct_copy copies an in-kernel buffer to a sg list in order to spoof some SCSI commands. stex_direct_copy calls dma_map_sg and then stex_internal_copy with the value that dma_map_sg returned. It calls scsi_kmap_atomic_sg to copy data. scsi_kmap_atomic_sg doesn't see sg->dma_length so if dma_map_sg merges sg entries, stex_internal_copy gets the smaller number of sg entries than the acutual number, which means it wrongly think that the data length in the sg list is shorter than the actual length. stex_direct_copy shouldn't call dma_map_sg and it doesn't need since this code path doesn't involve dma transfers. This patch removes stex_direct_copy and simply calls stex_internal_copy with the actual number of sg entries. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] lpfc: Balance lockingMatthew Wilcox2008-02-231-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3163f725a5d071eea1830bbbfab78cfe3fc9baaf introduced locking in lpfc_sli_hbqbuf_fill_hbqs, but missed unlocking on one exit. Reported-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] qla4xxx: fix up residual handlingDavid Somayajulu2008-02-231-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the check in the residual case has an incorrect test of scsi_status (the logic is reversed, it should be scsi_status != 0 instead of !scsi_status. Since we checked a few lines above that scsi_status was non-zero, just eliminate this test Signed-off-by: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] libsas: fix error handlingJames Bottomley2008-02-221-24/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The libsas error handler has two fairly fatal bugs 1. scsi_sas_task_done calls scsi_eh_finish_cmd() too early. This happens if the task completes after it has been aborted but before the error handler starts up. Because scsi_eh_finish_cmd() decrements host_failed and adds the task to the done list, the error handler start check (host_failed == host_busy) never passes and the eh never starts. 2. The multiple task completion paths sas_scsi_clear_queue_... all simply delete the task from the error queue. This causes it to disappear into the ether, since a command must be placed on the done queue to be finished off by the error handler. This behaviour causes the HBA to hang on pending commands. Fix 1. by moving the SAS_TASK_STATE_ABORTED check to an exit clause at the top of the routine and calling ->scsi_done() unconditionally (it is a nop if the timer has fired). This keeps the task in the error handling queue until the eh starts. Fix 2. by making sure every task goes through task complete followed by scsi_eh_finish_cmd(). Tested this by firing resets across a disk running a hammer test (now it actually survives without hanging the system) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] arcmsr: fix message allocationDaniel Drake2008-02-221-15/+11Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arcmsr_iop_message_xfer() is called from atomic context under the queuecommand scsi_host_template handler. James Bottomley pointed out that the current GFP_KERNEL|GFP_DMA flags are wrong: firstly we are in atomic context, secondly this memory is not used for DMA. Also removed some unneeded casts. Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] mptbase: fix use-after-free'sAdrian Bunk2008-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ioc->name is used in the printk's after ioc has been freed. Free after prinks to fix this. This patch fixes two use-after-free's introduced by commit e78d5b8f1e73ab82f3fd041d05824cfee7d83a2c and spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] iscsi transport: make 2 functions staticAdrian Bunk2008-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the following needlessly global functions static: - __iscsi_unblock_session() - iscsi_session_state_name() Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] lpfc: make lpfc_disable_node() staticAdrian Bunk2008-02-222-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | This patch makes the needlessly global lpfc_disable_node() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] ips: fix data buffer accessors conversion bugFUJITA Tomonori2008-02-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug that can't handle a passthru command with more than two sg entries. Big thanks to Tim Pepper for debugging the problem. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] gdth: don't call pci_free_consistent under spinlockJames Bottomley2008-02-181-4/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The spinlock is held over too large a region: pscratch is a permanent address (it's allocated at boot time and never changes). All you need the smp lock for is mediating the scratch in use flag, so fix this by moving the spinlock into the case where we set the pscratch_busy flag to false. Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] qla2xxx: fix compile warning for printk formatFUJITA Tomonori2008-02-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | scsi/qla2xxx/qla_dfs.c: In function 'qla2x00_dfs_fce_show': scsi/qla2xxx/qla_dfs.c:26: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panicJames Bottomley2008-02-181-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The panic occurs if we get a MSGIN or MSGOUT for an unidentified SCB (meaning we didn't identify the outstanding command it was for). For MSGIN this is wrong because it could be an unsolicited negotiation MSGIN from the target. Still panic on unsolicited MSGOUT because this would represent a mistake in the negotiation phases. However, we should fix this as well. The specs say we should go to bus free for unexpected msgin. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | [SCSI] scsi_debug: disable clusteringFUJITA Tomonori2008-02-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scsi_debug does at several places: for_each_sg(sdb->table.sgl, sg, sdb->table.nents, k) { kaddr = (unsigned char *) kmap_atomic(sg_page(sg), KM_USER0); We cannot do something like that with the clustering enabled (or we can use scsi_kmap_atomic_sg). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-16 11:39:34 +0200