summaryrefslogtreecommitdiffstats
path: root/fs
Commit message (Collapse)AuthorAgeFilesLines
* NFSv4: Fix an Oops in nfs4_do_setattrTrond Myklebust2019-08-161-1/+1
| | | | | | | | | | | | | | | commit 09a54f0ebfe263bc27c90bbd80187b9a93283887 upstream. If the user specifies an open mode of 3, then we don't have a NFSv4 state attached to the context, and so we Oops when we try to dereference it. Reported-by: Olga Kornievskaia <aglo@umich.edu> Fixes: 29b59f9416937 ("NFSv4: change nfs4_do_setattr to take...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.10: 991eedb1371dc: NFSv4: Only pass the... Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* smb3: send CAP_DFS capability during session setupSteve French2019-08-161-0/+5
| | | | | | | | | | | | | | | | | commit 8d33096a460d5b9bd13300f01615df5bb454db10 upstream. We had a report of a server which did not do a DFS referral because the session setup Capabilities field was set to 0 (unlike negotiate protocol where we set CAP_DFS). Better to send it session setup in the capabilities as well (this also more closely matches Windows client behavior). Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* SMB3: Fix deadlock in validate negotiate hits reconnectPavel Shilovsky2019-08-161-1/+1
| | | | | | | | | | | | | | | | | | | commit e99c63e4d86d3a94818693147b469fa70de6f945 upstream. Currently we skip SMB2_TREE_CONNECT command when checking during reconnect because Tree Connect happens when establishing an SMB session. For SMB 3.0 protocol version the code also calls validate negotiate which results in SMB2_IOCL command being sent over the wire. This may deadlock on trying to acquire a mutex when checking for reconnect. Fix this by skipping SMB2_IOCL command when doing the reconnect check. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dax: dax_layout_busy_page() should not unmap cow pagesVivek Goyal2019-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d75996dd022b6d83bd14af59b2775b1aa639e4b9 upstream. Vivek: "As of now dax_layout_busy_page() calls unmap_mapping_range() with last argument as 1, which says even unmap cow pages. I am wondering who needs to get rid of cow pages as well. I noticed one interesting side affect of this. I mount xfs with -o dax and mmaped a file with MAP_PRIVATE and wrote some data to a page which created cow page. Then I called fallocate() on that file to zero a page of file. fallocate() called dax_layout_busy_page() which unmapped cow pages as well and then I tried to read back the data I wrote and what I get is old data from persistent memory. I lost the data I had written. This read basically resulted in new fault and read back the data from persistent memory. This sounds wrong. Are there any users which need to unmap cow pages as well? If not, I am proposing changing it to not unmap cow pages. I noticed this while while writing virtio_fs code where when I tried to reclaim a memory range and that corrupted the executable and I was running from virtio-fs and program got segment violation." Dan: "In fact the unmap_mapping_range() in this path is only to synchronize against get_user_pages_fast() and force it to call back into the filesystem to re-establish the mapping. COW pages should be left untouched by dax_layout_busy_page()." Cc: <stable@vger.kernel.org> Fixes: 5fac7408d828 ("mm, fs, dax: handle layout changes to pinned dax mappings") Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Link: https://lore.kernel.org/r/20190802192956.GA3032@redhat.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gfs2: gfs2_walk_metadata fixAndreas Gruenbacher2019-08-161-63/+101
| | | | | | | | | | | | | | | | | | | | | commit a27a0c9b6a208722016c8ec5ad31ec96082b91ec upstream. It turns out that the current version of gfs2_metadata_walker suffers from multiple problems that can cause gfs2_hole_size to report an incorrect size. This will confuse fiemap as well as lseek with the SEEK_DATA flag. Fix that by changing gfs2_hole_walker to compute the metapath to the first data block after the hole (if any), and compute the hole size based on that. Fixes xfstest generic/490. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com> Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* compat_ioctl: pppoe: fix PPPOEIOCSFWD handlingArnd Bergmann2019-08-091-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 055d88242a6046a1ceac3167290f054c72571cd9 ] Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269aa4d ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Btrfs: fix race leading to fs corruption after transaction abortFilipe Manana2019-08-061-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cb2d3daddbfb6318d170e79aac1f7d5e4d49f0d7 upstream. When one transaction is finishing its commit, it is possible for another transaction to start and enter its initial commit phase as well. If the first ends up getting aborted, we have a small time window where the second transaction commit does not notice that the previous transaction aborted and ends up committing, writing a superblock that points to btrees that reference extent buffers (nodes and leafs) that were not persisted to disk. The consequence is that after mounting the filesystem again, we will be unable to load some btree nodes/leafs, either because the content on disk is either garbage (or just zeroes) or corresponds to the old content of a previouly COWed or deleted node/leaf, resulting in the well known error messages "parent transid verify failed on ...". The following sequence diagram illustrates how this can happen. CPU 1 CPU 2 <at transaction N> btrfs_commit_transaction() (...) --> sets transaction state to TRANS_STATE_UNBLOCKED --> sets fs_info->running_transaction to NULL (...) btrfs_start_transaction() start_transaction() wait_current_trans() --> returns immediately because fs_info->running_transaction is NULL join_transaction() --> creates transaction N + 1 --> sets fs_info->running_transaction to transaction N + 1 --> adds transaction N + 1 to the fs_info->trans_list list --> returns transaction handle pointing to the new transaction N + 1 (...) btrfs_sync_file() btrfs_start_transaction() --> returns handle to transaction N + 1 (...) btrfs_write_and_wait_transaction() --> writeback of some extent buffer fails, returns an error btrfs_handle_fs_error() --> sets BTRFS_FS_STATE_ERROR in fs_info->fs_state --> jumps to label "scrub_continue" cleanup_transaction() btrfs_abort_transaction(N) --> sets BTRFS_FS_STATE_TRANS_ABORTED flag in fs_info->fs_state --> sets aborted field in the transaction and transaction handle structures, for transaction N only --> removes transaction from the list fs_info->trans_list btrfs_commit_transaction(N + 1) --> transaction N + 1 was not aborted, so it proceeds (...) --> sets the transaction's state to TRANS_STATE_COMMIT_START --> does not find the previous transaction (N) in the fs_info->trans_list, so it doesn't know that transaction was aborted, and the commit of transaction N + 1 proceeds (...) --> sets transaction N + 1 state to TRANS_STATE_UNBLOCKED btrfs_write_and_wait_transaction() --> succeeds writing all extent buffers created in the transaction N + 1 write_all_supers() --> succeeds --> we now have a superblock on disk that points to trees that refer to at least one extent buffer that was never persisted So fix this by updating the transaction commit path to check if the flag BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting the transaction to the TRANS_STATE_COMMIT_START we do not find any previous transaction in the fs_info->trans_list. If the flag is set, just fail the transaction commit with -EROFS, as we do in other places. The exact error code for the previous transaction abort was already logged and reported. Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Btrfs: fix incremental send failure after deduplicationFilipe Manana2019-08-061-62/+15Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b4f9a1a87a48c255bb90d8a6c3d555a1abb88130 upstream. When doing an incremental send operation we can fail if we previously did deduplication operations against a file that exists in both snapshots. In that case we will fail the send operation with -EIO and print a message to dmesg/syslog like the following: BTRFS error (device sdc): Send: inconsistent snapshot, found updated \ extent for inode 257 without updated inode item, send root is 258, \ parent root is 257 This requires that we deduplicate to the same file in both snapshots for the same amount of times on each snapshot. The issue happens because a deduplication only updates the iversion of an inode and does not update any other field of the inode, therefore if we deduplicate the file on each snapshot for the same amount of time, the inode will have the same iversion value (stored as the "sequence" field on the inode item) on both snapshots, therefore it will be seen as unchanged between in the send snapshot while there are new/updated/deleted extent items when comparing to the parent snapshot. This makes the send operation return -EIO and print an error message. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt # Create our first file. The first half of the file has several 64Kb # extents while the second half as a single 512Kb extent. $ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo $ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo # Create the base snapshot and the parent send stream from it. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1 $ btrfs send -f /tmp/1.snap /mnt/mysnap1 # Create our second file, that has exactly the same data as the first # file. $ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar # Create the second snapshot, used for the incremental send, before # doing the file deduplication. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2 # Now before creating the incremental send stream: # # 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This # will drop several extent items and add a new one, also updating # the inode's iversion (sequence field in inode item) by 1, but not # any other field of the inode; # # 2) Deduplicate into a different subrange of file foo in snapshot # mysnap2. This will replace an extent item with a new one, also # updating the inode's iversion by 1 but not any other field of the # inode. # # After these two deduplication operations, the inode items, for file # foo, are identical in both snapshots, but we have different extent # items for this inode in both snapshots. We want to check this doesn't # cause send to fail with an error or produce an incorrect stream. $ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo $ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo # Create the incremental send stream. $ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2 ERROR: send ioctl failed with -5: Input/output error This issue started happening back in 2015 when deduplication was updated to not update the inode's ctime and mtime and update only the iversion. Back then we would hit a BUG_ON() in send, but later in 2016 send was updated to return -EIO and print the error message instead of doing the BUG_ON(). A test case for fstests follows soon. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933 Fixes: 1c919a5e13702c ("btrfs: don't update mtime/ctime on deduped inodes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coda: add error handling for fgetZhouyang Jia2019-08-061-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 02551c23bcd85f0c68a8259c7b953d49d44f86af ] When fget fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling fget. Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ceph: return -ERANGE if virtual xattr value didn't fit in bufferJeff Layton2019-08-061-7/+7
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 3b421018f48c482bdc9650f894aa1747cf90e51d ] The getxattr manpage states that we should return ERANGE if the destination buffer size is too small to hold the value. ceph_vxattrcb_layout does this internally, but we should be doing this for all vxattrs. Fix the only caller of getxattr_cb to check the returned size against the buffer length and return -ERANGE if it doesn't fit. Drop the same check in ceph_vxattrcb_layout and just rely on the caller to handle it. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ceph: fix improper use of smp_mb__before_atomic()Andrea Parri2019-08-061-1/+6
| | | | | | | | | | | | | | | | | [ Upstream commit 749607731e26dfb2558118038c40e9c0c80d23b5 ] This barrier only applies to the read-modify-write operations; in particular, it does not apply to the atomic64_set() primitive. Replace the barrier with an smp_mb(). Fixes: fdd4e15838e59 ("ceph: rework dcache readdir") Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* cifs: Fix a race condition with cifs_echo_requestRonnie Sahlberg2019-08-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f2caf901c1b7ce65f9e6aef4217e3241039db768 ] There is a race condition with how we send (or supress and don't send) smb echos that will cause the client to incorrectly think the server is unresponsive and thus needs to be reconnected. Summary of the race condition: 1) Daisy chaining scheduling creates a gap. 2) If traffic comes unfortunate shortly after the last echo, the planned echo is suppressed. 3) Due to the gap, the next echo transmission is delayed until after the timeout, which is set hard to twice the echo interval. This is fixed by changing the timeouts from 2 to three times the echo interval. Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remount Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* btrfs: qgroup: Don't hold qgroup_ioctl_lock in btrfs_qgroup_inherit()Qu Wenruo2019-08-061-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e88439debd0a7f969b3ddba6f147152cd0732676 ] [BUG] Lockdep will report the following circular locking dependency: WARNING: possible circular locking dependency detected 5.2.0-rc2-custom #24 Tainted: G O ------------------------------------------------------ btrfs/8631 is trying to acquire lock: 000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs] but task is already holding lock: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&fs_info->tree_log_mutex){+.+.}: __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_commit_transaction+0x475/0xa00 [btrfs] btrfs_commit_super+0x71/0x80 [btrfs] close_ctree+0x2bd/0x320 [btrfs] btrfs_put_super+0x15/0x20 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x16/0xa0 [btrfs] deactivate_locked_super+0x3a/0x80 deactivate_super+0x51/0x60 cleanup_mnt+0x3f/0x80 __cleanup_mnt+0x12/0x20 task_work_run+0x94/0xb0 exit_to_usermode_loop+0xd8/0xe0 do_syscall_64+0x210/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&fs_info->reloc_mutex){+.+.}: __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_commit_transaction+0x40d/0xa00 [btrfs] btrfs_quota_enable+0x2da/0x730 [btrfs] btrfs_ioctl+0x2691/0x2b40 [btrfs] do_vfs_ioctl+0xa9/0x6d0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&fs_info->qgroup_ioctl_lock#2){+.+.}: lock_acquire+0xa7/0x190 __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_qgroup_inherit+0x40/0x620 [btrfs] create_pending_snapshot+0x9d7/0xe60 [btrfs] create_pending_snapshots+0x94/0xb0 [btrfs] btrfs_commit_transaction+0x415/0xa00 [btrfs] btrfs_mksubvol+0x496/0x4e0 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0xa90/0x2b40 [btrfs] do_vfs_ioctl+0xa9/0x6d0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: &fs_info->qgroup_ioctl_lock#2 --> &fs_info->reloc_mutex --> &fs_info->tree_log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->tree_log_mutex); lock(&fs_info->reloc_mutex); lock(&fs_info->tree_log_mutex); lock(&fs_info->qgroup_ioctl_lock#2); *** DEADLOCK *** 6 locks held by btrfs/8631: #0: 00000000ed8f23f6 (sb_writers#12){.+.+}, at: mnt_want_write_file+0x28/0x60 #1: 000000009fb1597a (&type->i_mutex_dir_key#10/1){+.+.}, at: btrfs_mksubvol+0x70/0x4e0 [btrfs] #2: 0000000088c5ad88 (&fs_info->subvol_sem){++++}, at: btrfs_mksubvol+0x128/0x4e0 [btrfs] #3: 000000009606fc3e (sb_internal#2){.+.+}, at: start_transaction+0x37a/0x520 [btrfs] #4: 00000000f82bbdf5 (&fs_info->reloc_mutex){+.+.}, at: btrfs_commit_transaction+0x40d/0xa00 [btrfs] #5: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs] [CAUSE] Due to the delayed subvolume creation, we need to call btrfs_qgroup_inherit() inside commit transaction code, with a lot of other mutex hold. This hell of lock chain can lead to above problem. [FIX] On the other hand, we don't really need to hold qgroup_ioctl_lock if we're in the context of create_pending_snapshot(). As in that context, we're the only one being able to modify qgroup. All other qgroup functions which needs qgroup_ioctl_lock are either holding a transaction handle, or will start a new transaction: Functions will start a new transaction(): * btrfs_quota_enable() * btrfs_quota_disable() Functions hold a transaction handler: * btrfs_add_qgroup_relation() * btrfs_del_qgroup_relation() * btrfs_create_qgroup() * btrfs_remove_qgroup() * btrfs_limit_qgroup() * btrfs_qgroup_inherit() call inside create_subvol() So we have a higher level protection provided by transaction, thus we don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit(). Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in create_pending_snapshot() is already protected by transaction. So the fix is to detect the context by checking trans->transaction->state. If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction context and no need to get the mutex. Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* btrfs: fix minimum number of chunk errors for DUPDavid Sterba2019-08-061-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0ee5f8ae082e1f675a2fb6db601c31ac9958a134 ] The list of profiles in btrfs_chunk_max_errors lists DUP as a profile DUP able to tolerate 1 device missing. Though this profile is special with 2 copies, it still needs the device, unlike the others. Looking at the history of changes, thre's no clear reason why DUP is there, functions were refactored and blocks of code merged to one helper. d20983b40e828 Btrfs: fix writing data into the seed filesystem - factor code to a helper de11cc12df173 Btrfs: don't pre-allocate btrfs bio - unrelated change, DUP still in the list with max errors 1 a236aed14ccb0 Btrfs: Deal with failed writes in mirrored configurations - introduced the max errors, leaves DUP and RAID1 in the same group Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* fs/adfs: super: fix use-after-free bugRussell King2019-08-061-1/+4
| | | | | | | | | | | | [ Upstream commit 5808b14a1f52554de612fee85ef517199855e310 ] Fix a use-after-free bug during filesystem initialisation, where we access the disc record (which is stored in a buffer) after we have released the buffer. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ceph: hold i_ceph_lock when removing caps for freeing inodeYan, Zheng2019-08-041-2/+5
| | | | | | | | | | | | | commit d6e47819721ae2d9d090058ad5570a66f3c42e39 upstream. ceph_d_revalidate(, LOOKUP_RCU) may call __ceph_caps_issued_mask() on a freeing inode. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* /proc/<pid>/cmdline: add back the setproctitle() special caseLinus Torvalds2019-08-041-4/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d26d0cd97c88eb1a5704b42e41ab443406807810 upstream. This makes the setproctitle() special case very explicit indeed, and handles it with a separate helper function entirely. In the process, it re-instates the original semantics of simply stopping at the first NUL character when the original last NUL character is no longer there. [ The original semantics can still be seen in mm/util.c: get_cmdline() that is limited to a fixed-size buffer ] This makes the logic about when we use the string lengths etc much more obvious, and makes it easier to see what we do and what the two very different cases are. Note that even when we allow walking past the end of the argument array (because the setproctitle() might have overwritten and overflowed the original argv[] strings), we only allow it when it overflows into the environment region if it is immediately adjacent. [ Fixed for missing 'count' checks noted by Alexey Izbyshev ] Link: https://lore.kernel.org/lkml/alpine.LNX.2.21.1904052326230.3249@kich.toxcorp.com/ Fixes: 5ab827189965 ("fs/proc: simplify and clarify get_mm_cmdline() function") Cc: Jakub Jankowski <shasta@toxcorp.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Izbyshev <izbyshev@ispras.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* /proc/<pid>/cmdline: remove all the special casesLinus Torvalds2019-08-041-63/+8Star
| | | | | | | | | | | | | | | | | | | | | | | commit 3d712546d8ba9f25cdf080d79f90482aa4231ed4 upstream. Start off with a clean slate that only reads exactly from arg_start to arg_end, without any oddities. This simplifies the code and in the process removes the case that caused us to potentially leak an uninitialized byte from the temporary kernel buffer. Note that in order to start from scratch with an understandable base, this simplifies things _too_ much, and removes all the legacy logic to handle setproctitle() having changed the argument strings. We'll add back those special cases very differently in the next commit. Link: https://lore.kernel.org/lkml/20190712160913.17727-1-izbyshev@ispras.ru/ Fixes: f5b65348fd77 ("proc: fix missing final NUL in get_mm_cmdline() rewrite") Cc: Alexey Izbyshev <izbyshev@ispras.ru> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sched/fair: Don't free p->numa_faults with concurrent readersJann Horn2019-08-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 16d51a590a8ce3befb1308e0e7ab77f3b661af33 upstream. When going through execve(), zero out the NUMA fault statistics instead of freeing them. During execve, the task is reachable through procfs and the scheduler. A concurrent /proc/*/sched reader can read data from a freed ->numa_faults allocation (confirmed by KASAN) and write it back to userspace. I believe that it would also be possible for a use-after-free read to occur through a race between a NUMA fault and execve(): task_numa_fault() can lead to task_numa_compare(), which invokes task_weight() on the currently running task of a different CPU. Another way to fix this would be to make ->numa_faults RCU-managed or add extra locking, but it seems easier to wipe the NUMA fault statistics on execve. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()") Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFS: Cleanup if nfs_match_client is interruptedBenjamin Coddington2019-08-041-2/+2
| | | | | | | | | | | | | | commit 9f7761cf0409465075dadb875d5d4b8ef2f890c8 upstream. Don't bail out before cleaning up a new allocation if the wait for searching for a matching nfs client is interrupted. Memory leaks. Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com Fixes: 950a578c6128 ("NFS: make nfs_match_client killable") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFSv4: Fix lookup revalidate of regular filesTrond Myklebust2019-08-041-40/+39Star
| | | | | | | | | | | | | commit c7944ebb9ce9461079659e9e6ec5baaf73724b3b upstream. If we're revalidating an existing dentry in order to open a file, we need to ensure that we check the directory has not changed before we optimise away the lookup. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Qian Lu <luqia@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFS: Refactor nfs_lookup_revalidate()Trond Myklebust2019-08-041-96/+126
| | | | | | | | | | | | commit 5ceb9d7fdaaf6d8ced6cd7861cf1deb9cd93fa47 upstream. Refactor the code in nfs_lookup_revalidate() as a stepping stone towards optimising and fixing nfs4_lookup_revalidate(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Qian Lu <luqia@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFS: Fix dentry revalidation on NFSv4 lookupTrond Myklebust2019-08-041-3/+12
| | | | | | | | | | | | | | | | | commit be189f7e7f03de35887e5a85ddcf39b91b5d7fc1 upstream. We need to ensure that inode and dentry revalidation occurs correctly on reopen of a file that is already open. Currently, we can end up not revalidating either in the case of NFSv4.0, due to the 'cached open' path. Let's fix that by ensuring that we only do cached open for the special cases of open recovery and delegation return. Reported-by: Stan Hu <stanhu@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Qian Lu <luqia@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* access: avoid the RCU grace period for the temporary subjective credentialsLinus Torvalds2019-07-311-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d7852fbd0f0423937fa287a598bfde188bb68c22 upstream. It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU work because it installs a temporary credential that gets allocated and freed for each system call. The allocation and freeing overhead is mostly benign, but because credentials can be accessed under the RCU read lock, the freeing involves a RCU grace period. Which is not a huge deal normally, but if you have a lot of access() calls, this causes a fair amount of seconday damage: instead of having a nice alloc/free patterns that hits in hot per-CPU slab caches, you have all those delayed free's, and on big machines with hundreds of cores, the RCU overhead can end up being enormous. But it turns out that all of this is entirely unnecessary. Exactly because access() only installs the credential as the thread-local subjective credential, the temporary cred pointer doesn't actually need to be RCU free'd at all. Once we're done using it, we can just free it synchronously and avoid all the RCU overhead. So add a 'non_rcu' flag to 'struct cred', which can be set by users that know they only use it in non-RCU context (there are other potential users for this). We can make it a union with the rcu freeing list head that we need for the RCU case, so this doesn't need any extra storage. Note that this also makes 'get_current_cred()' clear the new non_rcu flag, in case we have filesystems that take a long-term reference to the cred and then expect the RCU delayed freeing afterwards. It's not entirely clear that this is required, but it makes for clear semantics: the subjective cred remains non-RCU as long as you only access it synchronously using the thread-local accessors, but you _can_ use it as a generic cred if you want to. It is possible that we should just remove the whole RCU markings for ->cred entirely. Only ->real_cred is really supposed to be accessed through RCU, and the long-term cred copies that nfs uses might want to explicitly re-enable RCU freeing if required, rather than have get_current_cred() do it implicitly. But this is a "minimal semantic changes" change for the immediate problem. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Glauber <jglauber@marvell.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com> Cc: Greg KH <greg@kroah.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* btrfs: inode: Don't compress if NODATASUM or NODATACOW setQu Wenruo2019-07-311-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 42c16da6d684391db83788eb680accd84f6c2083 upstream. As btrfs(5) specified: Note If nodatacow or nodatasum are enabled, compression is disabled. If NODATASUM or NODATACOW set, we should not compress the extent. Normally NODATACOW is detected properly in run_delalloc_range() so compression won't happen for NODATACOW. However for NODATASUM we don't have any check, and it can cause compressed extent without csum pretty easily, just by: mkfs.btrfs -f $dev mount $dev $mnt -o nodatasum touch $mnt/foobar mount -o remount,datasum,compress $mnt xfs_io -f -c "pwrite 0 128K" $mnt/foobar And in fact, we have a bug report about corrupted compressed extent without proper data checksum so even RAID1 can't recover the corruption. (https://bugzilla.kernel.org/show_bug.cgi?id=199707) Running compression without proper checksum could cause more damage when corruption happens, as compressed data could make the whole extent unreadable, so there is no need to allow compression for NODATACSUM. The fix will refactor the inode compression check into two parts: - inode_can_compress() As the hard requirement, checked at btrfs_run_delalloc_range(), so no compression will happen for NODATASUM inode at all. - inode_need_compress() As the soft requirement, checked at btrfs_run_delalloc_range() and compress_file_range(). Reported-by: James Harvey <jamespharvey20@gmail.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* proc: use down_read_killable mmap_sem for /proc/pid/mapsKonstantin Khlebnikov2019-07-312-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8a713e7df3352b8d9392476e9cf29e4e185dac32 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. This function is also used for /proc/pid/smaps. Link: http://lkml.kernel.org/r/156007493160.3335.14447544314127417266.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* proc: use down_read_killable mmap_sem for /proc/pid/map_filesKonstantin Khlebnikov2019-07-311-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cd9e2bb8271c971d9f37c722be2616c7f8ba0664 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. It seems ->d_revalidate() could return any error (except ECHILD) to abort validation and pass error as result of lookup sequence. [akpm@linux-foundation.org: fix proc_map_files_lookup() return value, per Andrei] Link: http://lkml.kernel.org/r/156007493995.3335.9595044802115356911.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* proc: use down_read_killable mmap_sem for /proc/pid/clear_refsKonstantin Khlebnikov2019-07-311-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c46038017fbdcac627b670c9d4176f1d0c2f5fa3 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Replace the only unkillable mmap_sem lock in clear_refs_write(). Link: http://lkml.kernel.org/r/156007493826.3335.5424884725467456239.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* proc: use down_read_killable mmap_sem for /proc/pid/pagemapKonstantin Khlebnikov2019-07-311-1/+3
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ad80b932c57d85fd6377f97f359b025baf179a87 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007493638.3335.4872164955523928492.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollupKonstantin Khlebnikov2019-07-311-2/+6
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a26a97815548574213fd37f29b4b78ccc6d9ed20 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007493429.3335.14666825072272692455.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memcg, fsnotify: no oom-kill for remote memcg chargingShakeel Butt2019-07-312-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ec165450968b26298bd1c373de37b0ab6d826b33 ] Commit d46eb14b735b ("fs: fsnotify: account fsnotify metadata to kmemcg") added remote memcg charging for fanotify and inotify event objects. The aim was to charge the memory to the listener who is interested in the events but without triggering the OOM killer. Otherwise there would be security concerns for the listener. At the time, oom-kill trigger was not in the charging path. A parallel work added the oom-kill back to charging path i.e. commit 29ef680ae7c2 ("memcg, oom: move out_of_memory back to the charge path"). So to not trigger oom-killer in the remote memcg, explicitly add __GFP_RETRY_MAYFAIL to the fanotigy and inotify event allocations. Link: http://lkml.kernel.org/r/20190514212259.156585-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* 9p: pass the correct prototype to read_cache_pageChristoph Hellwig2019-07-311-2/+4
| | | | | | | | | | | | | | | | | [ Upstream commit f053cbd4366051d7eb6ba1b8d529d20f719c2963 ] Fix the callback 9p passes to read_cache_page to actually have the proper type expected. Casting around function pointers can easily hide typing bugs, and defeats control flow protection. Link: http://lkml.kernel.org/r/20190520055731.24538-5-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dlm: check if workqueues are NULL before flushing/destroyingDavid Windsor2019-07-311-6/+12
| | | | | | | | | | | | | | | | [ Upstream commit b355516f450703c9015316e429b66a93dfff0e6f ] If the DLM lowcomms stack is shut down before any DLM traffic can be generated, flush_workqueue() and destroy_workqueue() can be called on empty send and/or recv workqueues. Insert guard conditionals to only call flush_workqueue() and destroy_workqueue() on workqueues that are not NULL. Signed-off-by: David Windsor <dwindsor@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* f2fs: avoid out-of-range memory accessOcean Chen2019-07-311-0/+5
| | | | | | | | | | | | | | [ Upstream commit 56f3ce675103e3fb9e631cfb4131fc768bc23e9a ] blkoff_off might over 512 due to fs corrupt or security vulnerability. That should be checked before being using. Use ENTRIES_IN_SUM to protect invalid value in cur_data_blkoff. Signed-off-by: Ocean Chen <oceanchen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ext4: allow directory holesTheodore Ts'o2019-07-282-18/+46
| | | | | | | | | | | | | | | | commit 4e19d6b65fb4fc42e352ce9883649e049da14743 upstream. The largedir feature was intended to allow ext4 directories to have unmapped directory blocks (e.g., directory holes). And so the released e2fsprogs no longer enforces this for largedir file systems; however, the corresponding change to the kernel-side code was not made. This commit fixes this oversight. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: use jbd2_inode dirty range scopingRoss Zwisler2019-07-283-10/+18
| | | | | | | | | | | | | | commit 73131fbb003b3691cfcf9656f234b00da497fcd6 upstream. Use the newly introduced jbd2_inode dirty range scoping to prevent us from waiting forever when trying to complete a journal transaction. Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* jbd2: introduce jbd2_inode dirty range scopingRoss Zwisler2019-07-283-27/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6ba0e7dc64a5adcda2fbe65adc466891795d639e upstream. Currently both journal_submit_inode_data_buffers() and journal_finish_inode_data_buffers() operate on the entire address space of each of the inodes associated with a given journal entry. The consequence of this is that if we have an inode where we are constantly appending dirty pages we can end up waiting for an indefinite amount of time in journal_finish_inode_data_buffers() while we wait for all the pages under writeback to be written out. The easiest way to cause this type of workload is do just dd from /dev/zero to a file until it fills the entire filesystem. This can cause journal_finish_inode_data_buffers() to wait for the duration of the entire dd operation. We can improve this situation by scoping each of the inode dirty ranges associated with a given transaction. We do this via the jbd2_inode structure so that the scoping is contained within jbd2 and so that it follows the lifetime and locking rules for that structure. This allows us to limit the writeback & wait in journal_submit_inode_data_buffers() and journal_finish_inode_data_buffers() respectively to the dirty range for a given struct jdb2_inode, keeping us from waiting forever if the inode in question is still being appended to. Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: enforce the immutable flag on open filesTheodore Ts'o2019-07-282-0/+15
| | | | | | | | | | | | | | | | | | | | | commit 02b016ca7f99229ae6227e7b2fc950c4e140d74a upstream. According to the chattr man page, "a file with the 'i' attribute cannot be modified..." Historically, this was only enforced when the file was opened, per the rest of the description, "... and the file can not be opened in write mode". There is general agreement that we should standardize all file systems to prevent modifications even for files that were opened at the time the immutable flag is set. Eventually, a change to enforce this at the VFS layer should be landing in mainline. Until then, enforce this at the ext4 level to prevent xfstests generic/553 from failing. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: don't allow any modifications to an immutable fileDarrick J. Wong2019-07-281-1/+45
| | | | | | | | | | | | | | commit 2e53840362771c73eb0a5ff71611507e64e8eecd upstream. Don't allow any modifications to a file that's marked immutable, which means that we have to flush all the writable pages to make the readonly and we have to check the setattr/setflags parameters more closely. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* eCryptfs: fix a couple type promotion bugsDan Carpenter2019-07-261-4/+8
| | | | | | | | | | | | | | | commit 0bdf8a8245fdea6f075a5fede833a5fcf1b3466c upstream. ECRYPTFS_SIZE_AND_MARKER_BYTES is type size_t, so if "rc" is negative that gets type promoted to a high positive value and treated as success. Fixes: 778aeb42a708 ("eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [tyhicks: Use "if/else if" rather than "if/if"] Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xfs: abort unaligned nowait directio earlyDarrick J. Wong2019-07-261-3/+3
| | | | | | | | | | | | | | | | | | | commit 1fdeaea4d92c69fb9f871a787af6ad00f32eeea7 upstream. Dave Chinner noticed that xfs_file_dio_aio_write returns EAGAIN without dropping the IOLOCK when its deciding not to wait, which means that we leak the IOLOCK there. Since we now make unaligned directio always wait, we have the opportunity to bail out before trying to take the lock, which should reduce the overhead of this never-gonna-work case considerably while also solving the dropped lock problem. Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfs: serialize unaligned dio writes against all other dio writesBrian Foster2019-07-261-10/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2032a8a27b5cc0f578d37fa16fa2494b80a0d00a upstream. XFS applies more strict serialization constraints to unaligned direct writes to accommodate things like direct I/O layer zeroing, unwritten extent conversion, etc. Unaligned submissions acquire the exclusive iolock and wait for in-flight dio to complete to ensure multiple submissions do not race on the same block and cause data corruption. This generally works in the case of an aligned dio followed by an unaligned dio, but the serialization is lost if I/Os occur in the opposite order. If an unaligned write is submitted first and immediately followed by an overlapping, aligned write, the latter submits without the typical unaligned serialization barriers because there is no indication of an unaligned dio still in-flight. This can lead to unpredictable results. To provide proper unaligned dio serialization, require that such direct writes are always the only dio allowed in-flight at one time for a particular inode. We already acquire the exclusive iolock and drain pending dio before submitting the unaligned dio. Wait once more after the dio submission to hold the iolock across the I/O and prevent further submissions until the unaligned I/O completes. This is heavy handed, but consistent with the current pre-submission serialization for unaligned direct writes. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfs: fix reporting supported extra file attributes for statx()Luis R. Rodriguez2019-07-261-0/+8
| | | | | | | | | | | | | | | | | | | | | commit 1b9598c8fb9965fff901c4caa21fed9644c34df3 upstream. statx(2) notes that any attribute that is not indicated as supported by stx_attributes_mask has no usable value. Commit 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") added support for informing userspace of extra file attributes but forgot to list these flags as supported making reporting them rather useless for the pedantic userspace author. $ git describe --contains 5f955f26f3d42d04aba65590a32eb70eedb7f37d v4.11-rc6~5^2^2~2 Fixes: 5f955f26f3d42d ("xfs: report crtime and attribute flags to statx") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: add a comment reminding people to keep attributes_mask up to date] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfs: reserve blocks for ifree transaction during log recoveryDarrick J. Wong2019-07-262-0/+8
| | | | | | | | | | | | | | | | | | | | | | | commit 15a268d9f263ed3a0601a1296568241a5a3da7aa upstream. Log recovery frees all the inodes stored in the unlinked list, which can cause expansion of the free inode btree. The ifree code skips block reservations if it thinks there's a per-AG space reservation, but we don't set up the reservation until after log recovery, which means that a finobt expansion blows up in xfs_trans_mod_sb when we exceed the transaction's block reservation. To fix this, we set the "no finobt reservation" flag to true when we create the xfs_mount and only set it to false if we confirm that every AG had enough free space to put aside for the finobt. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfs: don't ever put nlink > 0 inodes on the unlinked listDarrick J. Wong2019-07-262-12/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c4a6bf7f6cc7eb4cce120fb7eb1e1fb8b2d65e09 upstream. When XFS creates an O_TMPFILE file, the inode is created with nlink = 1, put on the unlinked list, and then the VFS sets nlink = 0 in d_tmpfile. If we crash before anything logs the inode (it's dirty incore but the vfs doesn't tell us it's dirty so we never log that change), the iunlink processing part of recovery will then explode with a pile of: XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file: fs/xfs/xfs_log_recover.c, line: 5072 Worse yet, since nlink is nonzero, the inodes also don't get cleaned up and they just leak until the next xfs_repair run. Therefore, change xfs_iunlink to require that inodes being put on the unlinked list have nlink == 0, change the tmpfile callers to instantiate nodes that way, and set the nlink to 1 just prior to calling d_tmpfile. Fix the comment for xfs_iunlink while we're at it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfs: rename m_inotbt_nores to m_finobt_noresDarrick J. Wong2019-07-264-5/+5
| | | | | | | | | | | | | | | commit e1f6ca11381588e3ef138c10de60eeb34cb8466a upstream. Rename this flag variable to imply more strongly that it's related to the free inode btree (finobt) operation. No functional changes. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfs: don't overflow xattr listent bufferDarrick J. Wong2019-07-262-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3b50086f0c0d78c144d9483fa292c1509c931b70 upstream. For VFS listxattr calls, xfs_xattr_put_listent calls __xfs_xattr_put_listent twice if it sees an attribute "trusted.SGI_ACL_FILE": once for that name, and again for "system.posix_acl_access". Unfortunately, if we happen to run out of buffer space while emitting the first name, we set count to -1 (so that we can feed ERANGE to the caller). The second invocation doesn't check that the context parameters make sense and overwrites the byte before the buffer, triggering a KASAN report: ================================================================== BUG: KASAN: slab-out-of-bounds in strncpy+0xb3/0xd0 Write of size 1 at addr ffff88807fbd317f by task syz/1113 CPU: 3 PID: 1113 Comm: syz Not tainted 5.0.0-rc6-xfsx #rc6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xcc/0x180 print_address_description+0x6c/0x23c kasan_report.cold.3+0x1c/0x35 strncpy+0xb3/0xd0 __xfs_xattr_put_listent+0x1a9/0x2c0 [xfs] xfs_attr_list_int_ilocked+0x11af/0x1800 [xfs] xfs_attr_list_int+0x20c/0x2e0 [xfs] xfs_vn_listxattr+0x225/0x320 [xfs] listxattr+0x11f/0x1b0 path_listxattr+0xbd/0x130 do_syscall_64+0x139/0x560 While we're at it we add an assert to the other put_listent to avoid this sort of thing ever happening to the attrlist_by_handle code. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfs: flush removing page cache in xfs_reflink_remap_prepDave Chinner2019-07-263-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2c307174ab77e34645e75e12827646e044d273c3 upstream. On a sub-page block size filesystem, fsx is failing with a data corruption after a series of operations involving copying a file with the destination offset beyond EOF of the destination of the file: 8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW 8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes) 8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400 8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE 8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00 The second copy here is beyond EOF, and it is to sub-page (4k) but block aligned (1k) offset. The clone runs the EOF zeroing, landing in a pre-existing post-eof delalloc extent. This zeroes the post-eof extents in the page cache just fine, dirtying the pages correctly. The problem is that xfs_reflink_remap_prep() now truncates the page cache over the range that it is copying it to, and rounds that down to cover the entire start page. This removes the dirty page over the delalloc extent from the page cache without having written it back. Hence later, when the page cache is flushed, the page at offset 0x6f000 has not been written back and hence exposes stale data, which fsx trips over less than 10 operations later. Fix this by changing xfs_reflink_remap_prep() to use xfs_flush_unmap_range(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfs: fix pagecache truncation prior to reflinkDarrick J. Wong2019-07-261-2/+3
| | | | | | | | | | | | | | | | | | commit 4918ef4ea008cd2ff47eb852894e3f9b9047f4f3 upstream. Prior to remapping blocks, it is necessary to remove pages from the destination file's page cache. Unfortunately, the truncation is not aggressive enough -- if page size > block size, we'll end up zeroing subpage blocks instead of removing them. So, round the start offset down and the end offset up to page boundaries. We already wrote all the dirty data so the larger range shouldn't be a problem. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* coda: pass the host file in vma->vm_file on mmapJan Harkes2019-07-261-2/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7fa0a1da3dadfd9216df7745a1331fdaa0940d1c upstream. Patch series "Coda updates". The following patch series is a collection of various fixes for Coda, most of which were collected from linux-fsdevel or linux-kernel but which have as yet not found their way upstream. This patch (of 22): Various file systems expect that vma->vm_file points at their own file handle, several use file_inode(vma->vm_file) to get at their inode or use vma->vm_file->private_data. However the way Coda wrapped mmap on a host file broke this assumption, vm_file was still pointing at the Coda file and the host file systems would scribble over Coda's inode and private file data. This patch fixes the incorrect expectation and wraps vm_ops->open and vm_ops->close to allow Coda to track when the vm_area_struct is destroyed so we still release the reference on the Coda file handle at the right time. Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-05 20:02:55 +0200