summaryrefslogtreecommitdiffstats
path: root/include/linux/mlx4
Commit message (Collapse)AuthorAgeFilesLines
* mlx4_en: eth statistics modificationEugenia Emantayev2012-01-221-0/+1
| | | | | | | | | | | In native mode display all available staticstics. In SRIOV mode on VF display only SW counters statistics, in SRIOV mode on hypervisor display SW counters and errors (got from FW) statistics. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_core: Changing link sensing logicYevgeny Petrilin2011-12-191-0/+2
| | | | | | | | | | | | | | | | New FW can give clues to driver regarding default port type and whether or not we should default to link sensing on the port. 2 bits are added to QUERY_PORT command: 1. suggested_type: This bit gives a hint whether the default port type should be IB or Ethernet. The driver will use this hint in case the user didn't specify explicitly the link layer type he wants to set. 2. default_sense: If this bit is set, we would sense the port type on start-up and default the port to link sensing Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: capability for link sensingYevgeny Petrilin2011-12-191-1/+2
| | | | | | | | | | For ConnectX3 devices, we allow link sensing only if FW explicitly reported it supports the feature. For older versions (ConnectX1 and 2), if the card supports both link layer types (Ethenet and Infiniband), link sensing is supported. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_core: Modify driver initialization flow to accommodate SRIOV for EthernetJack Morgenstein2011-12-132-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_core: mtts resources units changed to offsetMarcel Apfelbaum2011-12-131-3/+2Star
| | | | | | | | | | | | | | | | | | | In the previous implementation mtts are managed by: 1. order - log(mtt segments), 'mtt segment' groups several mtts together. 2. first_seg - segment location relative to mtt table. In the current implementation: 1. order - log(mtts) rather than segments 2. offset - mtt index in mtt table Note: The actual mtt allocation is made in segments but it is transparent to callers. Rational: The mtt resource holders are not interested on how the allocation of mtt is done, but rather on how they will use it. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: Ethernet port management modificationsEugenia Emantayev2011-12-131-3/+9
| | | | | | | | | | | | | | | | | The physical port is now common to the PF and VFs. The port resources and configuration is managed by the PF, VFs can only influence the MTU of the port, it is set as max among all functions, Each function allocates RX buffers of required size to meet it's MTU enforcement. Port management code was moved to mlx4_core, as the mlx4_en module is virtualization unaware Move handling qp functionality to mlx4_get_eth_qp/mlx4_put_eth_qp including reserve/release range and add/release unicast steering. Let mlx4_register/unregister_mac deal only with MAC (un)registration. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_core: Reduce number of PD bits to 17Jack Morgenstein2011-12-131-0/+1
| | | | | | | | | | | | | When SRIOV is enabled on the chip (at FW burning time), the HCA uses only 17 bits for the PD. The remaining 7 high-order bits are ignored. Change the allocator to return only 17 bits for the PD. The MSB 7 bits will be used to encode the slave number for consistency checking later on in the resource tracker. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_core: Add "native" argument to mlx4_cmd and its callers (where needed)Jack Morgenstein2011-12-131-7/+13
| | | | | | | | | | | | | | | For SRIOV, some Hypervisor commands can be executed directly (native = 1). Others should go through the command wrapper flow (for tracking resource usage, for example, or for changing some HCA configurations that slaves need to be notified of). This patch sets the groundwork for this capability -- adding the correct value of "native" in each case. Note that if SRIOV is not activated, this parameter has no effect. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: Extanding port_mask functionalityJack Morgenstein2011-12-131-7/+6Star
| | | | | | | | | | | | Port mask now has additional state. Port can be set as "none". In this case neither the mlx4_en or mlx4_ib drivers take ownership of the port. In multifunction mode there is an option to set the vfs as single ported devices. (in single function mode, both physical ports belong to same function) Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_core: initial header-file changes for SRIOV supportJack Morgenstein2011-12-132-3/+68
| | | | | | | | | | | | | | | | | | | These changes will not affect module operation as yet. They are only to get some structs and enums in place for use by subsequent patches (making those smaller). Added here: * sriov state structs and inlines (mlx4_is_master/slave/mfunc) * comm-channel and vhcr support structures * enum values for new FW and comm-channel virtual commands (i.e., commands, passed via the comm channel to the PF-driver). * prototypes for many command wrapper functions (used by the PF context for processing FW commands passed to it by the VFs). * struct mlx4_eqe is moved from eq.c to mlx4.h (it will be used by other mlx4_core source files). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: adding loopback supportAmir Vadai2011-11-271-0/+1
| | | | | | | | Device must be in promiscuous mode or DMAC must be same as the host MAC, or else packet will be dropped by the HW rx filtering. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: fix WOL handlers were always looking at port2 capability bitOren Duer2011-11-271-1/+2
| | | | | | | | There are 2 capability bits for WOL, one for each port. WOL handlers were looking only on the second bit, regardless of the port. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: move RSS related definitions to be globalOr Gerlitz2011-11-271-0/+27
| | | | | | | | | | Towards adding RSS support for IB drivers/application who use the mlx4 HW, make the RSS related definitions global and change the mlx4_en driver to use them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-11-012-3/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits) mlx4_core: Deprecate log_num_vlan module param IB/mlx4: Don't set VLAN in IBoE WQEs' control segment IB/mlx4: Enable 4K mtu for IBoE RDMA/cxgb4: Mark QP in error before disabling the queue in firmware RDMA/cxgb4: Serialize calls to CQ's comp_handler RDMA/cxgb3: Serialize calls to CQ's comp_handler IB/qib: Fix issue with link states and QSFP cables IB/mlx4: Configure extended active speeds mlx4_core: Add extended port capabilities support IB/qib: Hold links until tuning data is available IB/qib: Clean up checkpatch issue IB/qib: Remove s_lock around header validation IB/qib: Precompute timeout jiffies to optimize latency IB/qib: Use RCU for qpn lookup IB/qib: Eliminate divide/mod in converting idx to egr buf pointer IB/qib: Decode path MTU optimization IB/qib: Optimize RC/UC code by IB operation IPoIB: Use the right function to do DMA unmap pages RDMA/cxgb4: Use correct QID in insert_recv_cqe() RDMA/cxgb4: Make sure flush CQ entries are collected on connection close ...
| *-. Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'fdr', 'ipath', 'ipoib', ↵Roland Dreier2011-11-012-3/+16
| |\ \ | | | | | | | | | | | | 'misc', 'mlx4', 'misc', 'nes', 'qib' and 'xrc' into for-next
| | | * IB/mlx4: Add support for XRC QPsSean Hefty2011-10-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support the creation of XRC INI and TGT QPs. To handle the case where a CQ or PD is not provided, we allocate them internally with the xrcd. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | | * IB/mlx4: Add support for XRC SRQsSean Hefty2011-10-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the user to create XRC SRQs. This patch is based on a patch from Jack Morgenstrein <jackm@dev.mellanox.co.il>. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | | * IB/mlx4: Add support for XRC domainsSean Hefty2011-10-131-0/+5
| | |/ | |/| | | | | | | | | | | | | | | | | | | Support creating and destroying XRC domains. Any sharing of the XRCD is managed above the low-level driver. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * mlx4_core: Add extended port capabilities supportMarcel Apfelbaum2011-10-281-0/+7
| |/ | | | | | | | | | | | | | | | | | | An Extended Port Info packet is sent to each hw port during HCA init. If it returns without error, we assume the port supports extended port capabilities. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* / mlx4_en: Controlling FCS header removalYevgeny Petrilin2011-10-191-0/+1
|/ | | | | | | | Canceling FCS removal where FW allows for better alignment of incoming data. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* atomic: use <linux/atomic.h>Arun Sharma2011-07-271-1/+1
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* IB/mlx4: Use flow counters on IBoE portsOr Gerlitz2011-07-191-1/+2
| | | | | | | | | Allocate flow counter per Ethernet/IBoE port, and attach this counter to all the QPs created on that port. Based on patch by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
* mlx4_core: Add network flow countersOr Gerlitz2011-07-192-1/+20
| | | | | | | | | | | | ConnectX devices support a set of flow counters that can be attached to a set containing one or more QPs. Each such counter tracks receive and transmit packets and bytes of these QPs. This patch queries the device to check support for counters, handles initialization of the HCA to enable counters, and initializes a bitmap allocator to control counter allocations. Derived from patch by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
* mlx4_core: Fix location of counter index in QP context structOr Gerlitz2011-07-191-3/+2Star
| | | | | | | | | Fix the address handle portion of the QP context structure to have the correct bit location for the counter index field. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
* mlx4_core: Read extended capabilities into the flags fieldOr Gerlitz2011-07-191-6/+6
| | | | | | | | | | | | Query another dword containing up to 32 extended device capabilities and merge it into struct mlx4_caps.flags. Update the code that handles the current extended device capabilities (e.g UDP RSS, WoL, vep steering, etc) to use the extended device cap flags field instead of a field per extended capability. Initial patch done by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
* mlx4_core: Extend capability flags to 64 bitsOr Gerlitz2011-07-191-17/+17
| | | | | | | | | The latest firmware adds a second dword containing more device flags, so extend the device capabilities flags field from 32 to 64 bits. Derived from patch by Eli Cohen <eli@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
* mlx4: Add blue flame support for kernel consumersEli Cohen2011-03-232-0/+14
| | | | | | | | | | | | Using blue flame can improve latency by allowing the HW to more efficiently access the WQE. This patch presents two functions that are used to allocate or release HW resources for using blue flame; the caller need to supply a struct mlx4_bf object when allocating resources. Consumers that make use of this API should post doorbells to the UAR object pointed by the initialized struct mlx4_bf; Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Enabling new steeringYevgeny Petrilin2011-03-231-3/+9
| | | | | | | | | | The mlx4_en module now uses the new steering mechanism. The RX packets are now steered through the MCG table instead of Mac table for unicast, and default entry for multicast. The feature is enabled through INIT_HCA Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: generalization of multicast steering.Yevgeny Petrilin2011-03-231-2/+12
| | | | | | | | | The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Reporting HW revision in ethtool -iYevgeny Petrilin2011-03-231-1/+1
| | | | | | | | HW revision is derived from device ID and rev id. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: Wake on LAN supportYevgeny Petrilin2011-03-231-0/+4
| | | | | | | | | | The driver queries the FW for WOL support. Ethtool get/set_wol is implemented accordingly. Only magic packets are supported at the time. Signed-off-by: Igor Yarovinsky <igory@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4: Changing interrupt schemeYevgeny Petrilin2011-03-231-0/+8
| | | | | | | | | | | | | | | Adding a pool of MSI-X vectors and EQs that can be used explicitly by mlx4_core customers (mlx4_ib, mlx4_en). The consumers will assign their own names to the interrupt vectors. Those vectors are not opened at mlx4 device initialization, opened by demand. Changed the max number of possible EQs according to the new scheme, no longer relies on on number of cores. The new functionality is exposed through mlx4_assign_eq() and mlx4_release_eq(). Customers that do not use the new API will get completion vectors as before. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* IB/mlx4: Handle protocol field in multicast tableAleksey Senin2011-01-122-7/+9
| | | | | | | | | | | | | The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-10-274-4/+51
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits) IB/qib: clean up properly if pci_set_consistent_dma_mask() fails IB/qib: Allow driver to load if PCIe AER fails IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set IB/qib: Fix extra log level in qib_early_err() RDMA/cxgb4: Remove unnecessary KERN_<level> use RDMA/cxgb3: Remove unnecessary KERN_<level> use IB/core: Add link layer type information to sysfs IB/mlx4: Add VLAN support for IBoE IB/core: Add VLAN support for IBoE IB/mlx4: Add support for IBoE mlx4_en: Change multicast promiscuous mode to support IBoE mlx4_core: Update data structures and constants for IBoE mlx4_core: Allow protocol drivers to find corresponding interfaces IB/uverbs: Return link layer type to userspace for query port operation IB/srp: Sync buffer before posting send IB/srp: Use list_first_entry() IB/srp: Reduce number of BUSY conditions IB/srp: Eliminate two forward declarations IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144 IB: Replace EXTRA_CFLAGS with ccflags-y ...
| *-. Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', ↵Roland Dreier2010-10-274-4/+51
| |\ \ | | | | | | | | | | | | 'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next
| | | * IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144Jack Morgenstein2010-10-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Node Description cannot be changed via MADs (it is read-only). Until now, it was changed in the driver via sysfs, and the new Node Description was simply inserted by the driver into MAD responses (replacing the description returned by FW). System startup scripts use the sysfs interface to change the node description at driver startup to show the hostname, etc. However, this has a race condition: the SM could discover the original FW node description rather than the system-specific description if it queried the port before the startup scripts finish running. For mlx4, we fix this with a new FW command (SET_NODE) that allows passing the new node description to FW. When this command is invoked, FW sends a trap 144 to the SM. When it gets this trap, the SM can query the node to obtain the new node description -- thus eliminating the effects of the race. This patch simply calls SET_NODE command when a new node description is entered via sysfs (thus causing trap 144 to be issued by the FW). We ignore all failures of the SET_NODE command (including those caused by using a device FW that predates the SET_NODE command), since in that case things work just as before. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | | * IB/mlx4: Limit size of fast registration WRsEli Cohen2010-10-111-0/+4
| | |/ | |/| | | | | | | | | | | | | | | | | | | Fix the limit on the size of max fast registration WRs that can be posted to match hardware capabilities. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | * IB/mlx4: Add VLAN support for IBoEEli Cohen2010-10-252-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | * IB/mlx4: Add support for IBoEEli Cohen2010-10-251-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | * mlx4_core: Update data structures and constants for IBoEEli Cohen2010-10-253-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add fields to hardware data structures and add new constants required for IBoE support. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | * mlx4_core: Allow protocol drivers to find corresponding interfacesEli Cohen2010-10-251-0/+9
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a mechanism for mlx4 protocol drivers to get a pointer to other drivers's device objects. For this, an exported function, mlx4_get_protocol_dev() is added, which allows a driver to get some other driver's device based on the protocol that the driver implements. Two protocols are added: MLX4_PROTOCOL_IB and MLX4_PROTOCOL_EN. This will be used in mlx4 IBoE support so that mlx4_ib can find the corresponding mlx4_en netdev. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and rename a few things. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | mlx4_en: UDP RSS supportYevgeny Petrilin2010-08-241-0/+1
| | | | | | | | | | | | | | | | | | Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4_en: Fixing report in Ethtool get_settingsYevgeny Petrilin2010-08-241-0/+4
| | | | | | | | | | | | | | | | The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4_en: Added self diagnostics test implementationYevgeny Petrilin2010-08-242-0/+3
|/ | | | | | | | | | | | | The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* IB/mlx4: Add support for masked atomic operationsVladimir Sokolovsky2010-04-222-2/+9
| | | | | | | | Add support for masked atomic operations (masked compare and swap, masked fetch and add). Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mlx4: Remove limitation on LSO header sizeEli Cohen2009-11-121-0/+1
| | | | | | | | | | | | | | Current code has a limitation: an LSO header is not allowed to cross a 64 byte boundary. This patch removes this limitation by setting the WQE RR for large headers thus allowing LSO headers of any size. The extra buffer reserved for MLX4_IB_QP_LSO QPs has been doubled, from 64 to 128 bytes, assuming this is reasonable upper limit for header length. Also, this patch will cause IB_DEVICE_UD_TSO to be set only for HCA FW versions that set MLX4_DEV_CAP_FLAG_BLH; e.g. FW version 2.6.000 and higher. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/mlx4: Add strong ordering to local inval and fast reg work requestsJack Morgenstein2009-06-051-0/+1
| | | | | | | | | | | | | | | | | The ConnectX Programmer's Reference Manual states that the "SO" bit must be set when posting Fast Register and Local Invalidate send work requests. When this bit is set, the work request will be executed only after all previous work requests on the send queue have been executed. (If the bit is not set, Fast Register and Local Invalidate WQEs may begin execution too early, which violates the defined semantics for these operations) This fixes the issue with NFS/RDMA reported in <http://lists.openfabrics.org/pipermail/general/2009-April/059253.html> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* mlx4_core: Add module parameter for number of MTTs per segmentEli Cohen2009-05-271-0/+1
| | | | | | | | | | | | | The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* mlx4_core: Add link type autosensingYevgeny Petrilin2009-03-192-2/+5
| | | | | | | | | | | | When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* mlx4_core: Add support for multiple completion event vectorsYevgeny Petrilin2008-12-221-1/+3
| | | | | | | | | | | When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-10 21:48:46 +0200