summaryrefslogtreecommitdiffstats
path: root/include/linux/usb
Commit message (Collapse)AuthorAgeFilesLines
* usb: quirks: add control message delay for 1b1c:1b20Danilo Krummrich2018-03-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: renesas_usbhs: Add support for RZ/A1Chris Brandt2018-01-091-0/+1
| | | | | | | This patch adds the capability to support RZ/A1 SoCs. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-for-v4.16' of ↵Greg Kroah-Hartman2018-01-082-0/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v4.16 merge window Not many changes here, the most important being an improvement for TI's AM57xx and DRA7xx devices which allows them to disable a metastability workaround in situations where we know what's going on. Other than that, we have a set of changes on Renesas UDC to make the code a little easier to read and maintain while also better supporting extcon framework. The u_serial adaptation layer learned to use kfifo instead of cooking its own FIFO implementation. DWC3 learned to decode a few more USB requests on the trace output.
| * usb: renesas_usbhs: add a new callback for extcon notifierYoshihiro Shimoda2017-12-131-0/+8
| | | | | | | | | | | | | | | | To set host/peripheral mode by using extcon notifier, this patch adds a new callback as "notifier" in renesas_usbhs_platform_callback. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: gadget: add isoch_delay memberFelipe Balbi2017-12-111-0/+2
| | | | | | | | | | | | | | | | Whenever a USB host issues a Set Isoch Delay request, we should cache the result so relevant gadget drivers can make use of the value for calculating how many uFrames ahead a transfer should be queued. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | usb: pd: fix the offset for SVID specific commandsHeikki Krogerus2017-12-191-1/+1
| | | | | | | | | | | | | | | | | | | | The SVID specific commands in the Command field of the Structured VDM Header start from 16, not 10. Changing the value used in VDO_CMD_VENDOR() macro from 10 to 0x10. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 4.15-rc4 into usb-nextGreg Kroah-Hartman2017-12-181-0/+1
|\| | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usbnet: fix alignment for frames with no ethernet headerBjørn Mork2017-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster <jay@systech.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | typec: tcpm: Validate source and sink capsBadhri Jagan Sridharan2017-12-072-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The source and sink caps should follow the following rules. This patch validates whether the src_caps/snk_caps adheres to it. 6.4.1 Capabilities Message A Capabilities message (Source Capabilities message or Sink Capabilities message) shall have at least one Power Data Object for vSafe5V. The Capabilities message shall also contain the sending Port’s information followed by up to 6 additional Power Data Objects. Power Data Objects in a Capabilities message shall be sent in the following order: 1. The vSafe5V Fixed Supply Object shall always be the first object. 2. The remaining Fixed Supply Objects, if present, shall be sent in voltage order; lowest to highest. 3. The Battery Supply Objects, if present shall be sent in Minimum Voltage order; lowest to highest. 4. The Variable Supply (non-battery) Objects, if present, shall be sent in Minimum Voltage order; lowest to highest. Errors in source/sink_caps of the local port will prevent the port registration. Whereas, errors in source caps of partner device would only log them. Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: of: clean up device-node helperJohan Hovold2017-11-281-4/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up the USB device-node helper that is used to look up a device node given a parent hub device and a port number. Also pass in a struct usb_device as first argument to provide some type checking. Give the helper the more descriptive name usb_of_get_device_node(), which matches the new usb_of_get_interface_node() helper that is used to look up a second type of of child node from a USB device. Note that the terms "device node" and "interface node" are defined and used by the OF Recommended Practice for USB. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: add device-tree support for interfacesJohan Hovold2017-11-281-0/+14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add OF device-tree support for USB interfaces. USB "interface nodes" are children of USB "device nodes" and are identified by an interface number and a configuration value: &usb1 { /* host controller */ dev1: device@1 { /* device at port 1 */ compatible = "usb1234,5678"; reg = <1>; #address-cells = <2>; #size-cells = <0>; interface@0,2 { /* interface 0 of configuration 2 */ compatible = "usbif1234,5678.config2.0"; reg = <0 2>; }; }; }; The configuration component is not included in the textual representation of an interface-node unit address for configuration 1: &dev1 { interface@0 { /* interface 0 of configuration 1 */ compatible = "usbif1234,5678.config1.0"; reg = <0 1>; }; }; When a USB device of class 0 or 9 (hub) has only a single configuration with a single interface, a special case "combined node" is used instead of a device node with an interface node: &usb1 { device@2 { compatible = "usb1234,abcd"; reg = <2>; }; }; Combined nodes are shared by the two device structures representing the USB device and its interface in the kernel's device model. Note that, as for device nodes, the compatible strings for interface nodes are currently not used. For more details see "Open Firmware Recommended Practice: Universal Serial Bus Version 1" and the binding documentation. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds2017-11-1439-79/+51Star
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
| * USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman2017-11-0437-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: remove msm_hsusb_hw.hJack Pham2017-11-031-77/+0Star
| | | | | | | | | | | | | | | | | | The last two remaining drivers (ehci-msm.c and phy-msm-usb.c) that needed this header were recently removed, so delete this now-unused file. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'usb-for-v4.15' of ↵Greg Kroah-Hartman2017-10-242-2/+8
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v4.15 merge window Not much going on this time around. With only 51 non-merge commits, this was one of the smallest pull requests from the Gadget tree. Most of the changes are in the mtu3 driver which added support for 36-bit DMA, support for USB 3.1 and support for dual-role (along with some non-critical fixes). The dwc2 driver got a few improvements to how we handle gadget state tracking and also added support for STM32F7xx devices. Other than that, we just some minor non-critical fixes and improvements all over the place.
| | * usb: renesas_usbhs: add support for R-Car D3Yoshihiro Shimoda2017-10-191-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for R-Car D3. This SoC needs to release the PLL reset by the UGCTRL register. So, since this is not the same as other R-Car Gen3 SoCs, this patch adds a new type as "USBHS_TYPE_RCAR_GEN3_WITH_PLL". Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| | * usb: gadget: Add kerneldoc for some neglected structure fieldsJonathan Corbet2017-10-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A couple of structures in <linux/usb/gadget.h> have incomplete kerneldoc comments, leading to these warnings in the docs build: ./include/linux/usb/gadget.h:230: warning: No description found for parameter 'claimed' ./include/linux/usb/gadget.h:230: warning: No description found for parameter 'enabled' ./include/linux/usb/gadget.h:412: warning: No description found for parameter 'quirk_altset_not_supp' ./include/linux/usb/gadget.h:412: warning: No description found for parameter 'quirk_stall_not_supp' ./include/linux/usb/gadget.h:412: warning: No description found for parameter 'quirk_zlp_not_supp' Document those fields to make the warnings go away. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | USB: Force disconnect Huawei 4G modem during suspendDaniel Drake2017-10-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When going into S3 suspend, the Acer TravelMate P648-M and P648-G3 laptops immediately wake up 3-4 seconds later for no obvious reason. Unbinding the integrated Huawei 4G LTE modem before suspend avoids the issue, even though we are not using the modem at all (checked from rescue.target/runlevel1). The problem also occurs when the option and cdc-ether modem drivers aren't loaded; it reproduces just with the base usb driver. Under Windows the system can suspend fine. Seeking a better fix, we've tried a lot of things, including: - Check that the device's power/wakeup is disabled - Check that remote wakeup is off at the USB level - All the quirks in drivers/usb/core/quirks.c e.g. USB_QUIRK_RESET_RESUME, USB_QUIRK_RESET, USB_QUIRK_IGNORE_REMOTE_WAKEUP, USB_QUIRK_NO_LPM. but none of that makes any difference. There are no errors in the logs showing any suspend/resume-related issues. When the system wakes up due to the modem, log-wise it appears to be a normal resume. Introduce a quirk to disable the port during suspend when the modem is detected. The modem from the P648-G3 model is: T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=12d1 ProdID=15c3 Rev= 1.02 S: Manufacturer=Huawei Technologies Co., Ltd. S: Product=HUAWEI Mobile S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver= E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver= E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver= E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver= E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms I: If#= 3 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=16 Driver= E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver= E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms C:* #Ifs= 6 Cfg#= 2 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=2ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr= 2mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver= E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=2ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Based on an earlier patch by Chris Chiu. Signed-off-by: Daniel Drake <drake@endlessm.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'staging-4.15-rc1' of ↵Linus Torvalds2017-11-144-0/+784
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...
| * | typec: tcpm: Move out of stagingGuenter Roeck2017-09-184-0/+784
| |/ | | | | | | | | | | | | Move tcpm (USB Type-C Port Manager) out of staging. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-0220-0/+20
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: phy: Avoid unchecked dereference warningBaolin Wang2017-08-311-1/+4
| | | | | | | | Move the USB phy NULL checking before issuing usb_phy_set_charger_current() to avoid unchecked dereference warning. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-ci-v4.14-rc1' of ↵Greg Kroah-Hartman2017-08-281-0/+1
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Chipidea changes for v4.14-rc1 - Add chipidea support at Nvidia SoCs - Improvement for extcon support - Some code refines
| * usb: chipidea: udc: Support SKB alignment quirkDmitry Osipenko2017-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | NVIDIA Tegra20 UDC can't cope with unaligned DMA and require a USB gadget quirk that avoids SKB buffer alignment to be set in order to make Ethernet Gadget working. Later Tegra generations do not require that quirk. Let's add a new platform data flag that allows to enable USB gadget quirk for platforms that require it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* | usb: phy: Add USB charger supportBaolin Wang2017-08-151-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the usb charger support based on usb phy that makes an enhancement to a power driver. The basic conception of the usb charger is that, when one usb charger is added or removed by reporting from the extcon device state change, the usb charger will report to power user to set the current limitation. Power user can register a notifiee on the usb phy by issuing usb_register_notifier() to get notified by charger status changes or charger current changes. we can notify what current to be drawn to power user according to different charger type, and now we have 2 methods to get charger type. One is get charger type from extcon subsystem, which also means the charger state changes. Another is we can get the charger type from USB controller detecting or PMIC detecting, and the charger state changes should be told by issuing usb_phy_set_charger_state(). Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | usb: gadget: core: unmap request from DMA only if previously mappedJack Pham2017-08-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the SG case this is already handled since a non-zero request->num_mapped_sgs is a clear indicator that dma_map_sg() had been called. While it would be nice to do the same for the singly mapped case by simply checking for non-zero request->dma, it's conceivable that 0 is a valid dma_addr_t handle. Hence add a flag 'dma_mapped' to struct usb_request and use this to determine the need to call dma_unmap_single(). Otherwise, if a request is not DMA mapped then the result of calling usb_request_unmap_request() would safely be a no-op. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | Merge tag 'usb-4.13-rc2' of ↵Linus Torvalds2017-07-221-7/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.13-rc2. The usual batch, gadget fixes for reported issues, as well as xhci fixes, and a small random collection of other fixes for reported issues. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) xhci: fix memleak in xhci_run() usb: xhci: fix spinlock recursion for USB2 test mode xhci: fix 20000ms port resume timeout usb: xhci: Issue stop EP command only when the EP state is running xhci: Bad Ethernet performance plugged in ASM1042A host xhci: Fix NULL pointer dereference when cleaning up streams for removed host usb: renesas_usbhs: gadget: disable all eps when the driver stops usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen() usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd() usb: gadget: f_uac2: endianness fixes. usb: gadget: f_uac1: endianness fixes. include: usb: audio: specify exact endiannes of descriptors usb: gadget: udc: start_udc() can be static usb: dwc2: gadget: On USB RESET reset device address to zero usb: storage: return on error to avoid a null pointer dereference usb: typec: include linux/device.h in ucsi.h USB: cdc-acm: add device-id for quirky printer usb: dwc3: gadget: only unmap requests from DMA if mapped ...
| * | include: usb: audio: specify exact endiannes of descriptorsRuslan Bilovol2017-07-181-7/+7
| |/ | | | | | | | | | | | | | | | | | | USB spec says that multiple byte fields are stored in little-endian order (see chapter 8.1 of USB2.0 spec and chapter 7.1 of USB3.0 spec), thus mark such fields as LE for UAC1 and UAC2 headers Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* / cdc_ncm: Set NTB format again after altsetting switch for Huawei devicesEnrico Mioso2017-07-141-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by: Christian Panton <christian@panton.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2017-07-051-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
| * net: cdc_ncm: Reduce memory use when kernel memory lowJim Baxter2017-07-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CDC-NCM driver can require large amounts of memory to create skb's and this can be a problem when the memory becomes fragmented. This especially affects embedded systems that have constrained resources but wish to maximise the throughput of CDC-NCM with 16KiB NTB's. The issue is after running for a while the kernel memory can become fragmented and it needs compacting. If the NTB allocation is needed before the memory has been compacted the atomic allocation can fail which can cause increased latency, large re-transmissions or disconnections depending upon the data being transmitted at the time. This situation occurs for less than a second until the kernel has compacted the memory but the failed devices can take a lot longer to recover from the failed TX packets. To ease this temporary situation I modified the CDC-NCM TX path to temporarily switch into a reduced memory mode which allocates an NTB that will fit into a USB_CDC_NCM_NTB_MIN_OUT_SIZE (default 2048 Bytes) sized memory block and only transmit NTB's with a single network frame until the memory situation is resolved. Each time this issue occurs we wait for an increasing number of reduced size allocations before requesting a full size one to not put additional pressure on a low memory system. Once the memory is compacted the CDC-NCM data can resume transmitting at the normal tx_max rate once again. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'usb-for-v4.13' of ↵Greg Kroah-Hartman2017-06-202-0/+11
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing Felipe writes: usb: changes for v4.13 merge window This time around we have a total of 57 non-merge commits. A list of most important changes follows: - Improvements to dwc3 tracing interface - Initial dual-role support for dwc3 - Improvements to how we handle DMA resources in dwc3 - A new f_uac1 implementation which much more flexible - Removal of AVR32 bits - Improvements to f_mass_storage driver
| * | usb: gadget: core: introduce ->udc_set_speed() methodFelipe Balbi2017-06-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes, the gadget driver we want to run has max_speed lower than what the UDC supports. In such situations, UDC might want to make sure we don't try to connect on speeds not supported by the gadget driver (e.g. super-speed capable dwc3 with high-speed capable g_midi) because that will just fail. In order to make sure this situation never happens, we introduce a new optional ->udc_set_speed() method which can be implemented by interested UDC drivers. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: Allow a non-SuperSpeed gadget to support LPMJohn Youn2017-06-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allows a gadget that does not support SuperSpeed to indicate that it supports LPM. It does this by setting the 'lpm_capable' flag in the gadget structure. If a gadget sets this, the composite gadget framework will set the bcdUSB to 0x0201 to indicate that this supports BOS descriptors, and also return a USB 2.0 Extension descriptor as part of the BOS descriptor set. See USB 2.0 LPM ECN Section 3. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: phy: Introduce one extcon device into usb phyBaolin Wang2017-05-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usually usb phy need register one extcon device to get the connection notifications. It will remove some duplicate code if the extcon device is registered using common code instead of each phy driver having its own related extcon APIs. So we add one pointer of extcon device into usb phy structure, and some other helper functions to register extcon. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | | usb: Fix typo in the definition of Endpoint[out]RequestBenjamin Herrenschmidt2017-06-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge 4.12-rc5 into usb-nextGreg Kroah-Hartman2017-06-121-0/+1
|\ \ \ | | |/ | |/| | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | cdc-ether: divorce initialisation with a filter reset and a generic methodOliver Neukum2017-05-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices need their multicast filter reset but others are crashed by that. So the methods need to be separated. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: "Ridgway, Keith" <kridgway@harris.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | usb: typec: Add a sysfs node to manage port typeBadhri Jagan Sridharan2017-06-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | User space applications in some cases have the need to enforce a specific port type(DFP/UFP/DRP). This change allows userspace to attempt setting the desired port type. Low level drivers can however reject the request if the specific port type is not supported. Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge 4.12-rc2 into usb-nextGreg Kroah-Hartman2017-05-221-0/+1
|\| | | | | | | | | | | | | | | | | | | | We want the USB fixes in here as well to handle testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcdPeter Chen2017-05-181-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled, then the assertion of the Interrupt Pending (IP) flag in Figure 30 generates a PCI Dword write. The IP flag is automatically cleared by the completion of the PCI write. the MSI enabled HCs don't need to clear interrupt pending bit, but hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role controller software designs, it sets hcd->irq as 0 to avoid HCD requesting interrupt, and they want to decide when to call usb_hcd_irq by software. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / usb: typec: Don't prevent using constant typec_mode_desc initializersMats Karrman2017-05-171-3/+3
|/ | | | | | | | | | | | In some situations, e.g. when registering alternate modes for local typec ports, it may be handy to use constant mode descriptors. Allow this by changing the mode descriptor arguments of typec_port_register_altmode() et.al. to using const pointers. Signed-off-by: Mats Karrman <mats.dev.list@gmail.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-4.12-rc1' of ↵Linus Torvalds2017-05-055-27/+285
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) staging: typec: Fairchild FUSB302 Type-c chip driver staging: typec: Type-C Port Controller Interface driver (tcpci) staging: typec: USB Type-C Port Manager (tcpm) usb: host: xhci: remove #ifdef around PM functions usb: musb: don't mark of_dev_auxdata as initdata usb: misc: legousbtower: Fix buffers on stack USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" usb: Make sure usb/phy/of gets built-in USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h usb: host: xhci: print correct command ring address usb: host: xhci: delete sp_dma_buffers for scratchpad usb: host: xhci: using correct specification chapter reference for DCBAAP xhci: switch to pci_alloc_irq_vectors usb: host: xhci-plat: set resume_quirk() for R-Car controllers usb: host: xhci-plat: add resume_quirk() usb: host: xhci-plat: enable clk in resume timing usb: host: plat: Enable xHCI plat runtime PM USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit USB: serial: constify static arrays usb: fix some references for /proc/bus/usb ...
| * Merge tag 'usb-serial-4.12-rc1' of ↵Greg Kroah-Hartman2017-04-201-10/+32
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.12-rc1 Here are the USB-serial updates for 4.12, including: - support for devices with up to 16 ports (e.g. some Moxa devices) - support for endpoint sanity checks in core, which allows for code sharing and avoids allocating resources for rejected interfaces - support for endpoint-port remapping, which allows some driver hacks to be removed as well as omninet to use the generic write implementation - removal of an obsolete tty open-race workaround which prevented a port from being opened immediately after having been registered - generic-driver support for interfaces with just a bulk-in endpoint - improved ftdi_sio event-char and latency-timer handling - improved ftdi_sio support for some broken BM chips Included are also various clean ups and a new ftdi_sio device id. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: add calc_num_ports callback to generic driverJohan Hovold2017-03-281-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a calc_num_ports callback to the generic driver and verify that the device has the required endpoints there instead of in core. Note that the generic driver num_ports field was never used. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: allow subdrivers to modify port-endpoint mappingJohan Hovold2017-03-281-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow subdrivers to modify the port-endpoint mapping by passing the endpoint descriptors to calc_num_ports. The callback can now also be used to verify that the required endpoints exists and abort probing otherwise. This will allow us to get rid of a few hacks in subdrivers that are already modifying the port-endpoint mapping (or aborting probe due to missing endpoints), but only after the port structures have been setup. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: add endpoint sanity check to coreJohan Hovold2017-03-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | Allow drivers to specify a minimum number of endpoints per type, which USB serial core will verify after subdriver probe has returned (where the current alternate setting may have been changed). Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: allow up to 16 ports per deviceJohan Hovold2017-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Raise the arbitrary limit of how many ports a single device can claim from eight to 16. This specifically enables the upper eight ports of some mxuport devices. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: clean up endpoint and port-counter typesJohan Hovold2017-03-161-5/+6
| | | | | | | | | | | | | | | | | | Use unsigned-char type for the endpoint and port counters. Signed-off-by: Johan Hovold <johan@kernel.org>
| * | Merge tag 'usb-for-v4.12' of ↵Greg Kroah-Hartman2017-04-111-15/+0Star
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v4.12 With 51 non-merge commits, this is one of the smallest USB Gadget pull requests. Apart from your expected set of non-critical fixes, and other miscellaneous items, we have most of the changes in dwc3 (52.5%) with all other UDCs following with 34.8%. As for the actual changes, the most important of them are all the recent changes to reduce memory footprint of dwc3, bare minimum dual-role support on dwc3 and reworked endpoint count and initialization routines.