summaryrefslogtreecommitdiffstats
path: root/include/net/bluetooth
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: Ask upper layers for HCI disconnect reasonMarcel Holtmann2009-02-272-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the qualification tests demand that in case of failures in L2CAP the HCI disconnect should indicate a reason why L2CAP fails. This is a bluntly layer violation since multiple L2CAP connections could be using the same ACL and thus forcing a disconnect reason is not a good idea. To comply with the Bluetooth test specification, the disconnect reason is now stored in the L2CAP connection structure and every time a new L2CAP channel is added it will set back to its default. So only in the case where the L2CAP channel with the disconnect reason is really the last one, it will propagated to the HCI layer. The HCI layer has been extended with a disconnect indication that allows it to ask upper layers for a disconnect reason. The upper layer must not support this callback and in that case it will nicely default to the existing behavior. If an upper layer like L2CAP can provide a disconnect reason that one will be used to disconnect the ACL or SCO link. No modification to the ACL disconnect timeout have been made. So in case of Linux to Linux connection the initiator will disconnect the ACL link before the acceptor side can signal the specific disconnect reason. That is perfectly fine since Linux doesn't make use of this value anyway. The L2CAP layer has a perfect valid error code for rejecting connection due to a security violation. It is unclear why the Bluetooth specification insists on having specific HCI disconnect reason. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add CID field to L2CAP socket address structureMarcel Holtmann2009-02-271-0/+1
| | | | | | | | | | | | | | In preparation for L2CAP fixed channel support, the CID value of a L2CAP connection needs to be accessible via the socket interface. The CID is the connection identifier and exists as source and destination value. So extend the L2CAP socket address structure with this field and change getsockname() and getpeername() to fill it in. The bind() and connect() functions have been modified to handle L2CAP socket address structures of variable sizes. This makes them future proof if additional fields need to be added. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Request L2CAP fixed channel list if availableMarcel Holtmann2009-02-271-0/+1
| | | | | | | | | | If the extended features mask indicates support for fixed channels, request the list of available fixed channels. This also enables the fixed channel features bit so remote implementations can request information about it. Currently only the signal channel will be listed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Don't enforce authentication for L2CAP PSM 1 and 3Marcel Holtmann2009-02-271-0/+3
| | | | | | | | | | | | | | | | | The recommendation for the L2CAP PSM 1 (SDP) is to not use any kind of authentication or encryption. So don't trigger authentication for incoming and outgoing SDP connections. For L2CAP PSM 3 (RFCOMM) there is no clear requirement, but with Bluetooth 2.1 the initiator is required to enable authentication and encryption first and this gets enforced. So there is no need to trigger an additional authentication step. The RFCOMM service security will make sure that a secure enough link key is present. When the encryption gets enabled after the SDP connection setup, then switch the security level from SDP to low security. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix double L2CAP connection requestMarcel Holtmann2009-02-271-0/+1
| | | | | | | | | | | If the remote L2CAP server uses authentication pending stage and encryption is enabled it can happen that a L2CAP connection request is sent twice due to a race condition in the connection state machine. When the remote side indicates any kind of connection pending, then track this state and skip sending of L2CAP commands for this period. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix race condition with L2CAP information requestMarcel Holtmann2009-02-271-1/+2
| | | | | | | | | | When two L2CAP connections are requested quickly after the ACL link has been established there exists a window for a race condition where a connection request is sent before the information response has been received. Any connection request should only be sent after an exchange of the extended features mask has been finished. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Use general bonding whenever possibleMarcel Holtmann2009-02-271-1/+1
| | | | | | | | When receiving incoming connection to specific services, always use general bonding. This ensures that the link key gets stored and can be used for further authentications. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add SCO fallback for eSCO connection attemptsMarcel Holtmann2009-02-271-0/+8
| | | | | | | | | | | | | | | | | When attempting to setup eSCO connections it can happen that some link manager implementations fail to properly negotiate the eSCO parameters and thus fail the eSCO setup. Normally the link manager is responsible for the negotiation of the parameters and actually fallback to SCO if no agreement can be reached. In cases where the link manager is just too stupid, then at least try to establish a SCO link if eSCO fails. For the Bluetooth devices with EDR support this includes handling packet types of EDR basebands. This is particular tricky since for the EDR the logic of enabling/disabling one specific packet type is turned around. This fix contains an extra bitmask to disable eSCO EDR packet when trying to fallback to a SCO connection. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Pause RFCOMM TX when encryption dropsMarcel Holtmann2009-02-271-4/+5
| | | | | | | | | | | | | | | | | A role switch with devices following the Bluetooth pre-2.1 standards or without Encryption Pause and Resume support is not possible if encryption is enabled. Most newer headsets require the role switch, but also require that the connection is encrypted. For connections with a high security mode setting, the link will be immediately dropped. When the connection uses medium security mode setting, then a grace period is introduced where the TX is halted and the remote device gets a change to re-enable encryption after the role switch. If not re-enabled the link will be dropped. Based on initial work by Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Replace RFCOMM link mode with security levelMarcel Holtmann2009-02-271-3/+4
| | | | | | | Change the RFCOMM internals to use the new security levels and remove the link mode details. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Replace L2CAP link mode with security levelMarcel Holtmann2009-02-271-2/+3
| | | | | | | Change the L2CAP internals to use the new security levels and remove the link mode details. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add enhanced security model for Simple PairingMarcel Holtmann2009-02-272-23/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add support for deferring RFCOMM connection setupMarcel Holtmann2009-02-271-2/+4
| | | | | | | | | | | | In order to decide if listening RFCOMM sockets should be accept()ed the BD_ADDR of the remote device needs to be known. This patch adds a socket option which defines a timeout for deferring the actual connection setup. The connection setup is done after reading from the socket for the first time. Until then writing to the socket returns ENOTCONN. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add global deferred socket parameterMarcel Holtmann2009-02-271-0/+3
| | | | | | | | | | | | | The L2CAP and RFCOMM applications require support for authorization and the ability of rejecting incoming connection requests. The socket interface is not really able to support this. This patch does the ground work for a socket option to defer connection setup. Setting this option allows calling of accept() and then the first read() will trigger the final connection setup. Calling close() would reject the connection. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Enable per-module dynamic debug messagesMarcel Holtmann2008-11-301-2/+2
| | | | | | | | | | | With the introduction of CONFIG_DYNAMIC_PRINTK_DEBUG it is possible to allow debugging without having to recompile the kernel. This patch turns all BT_DBG() calls into pr_debug() to support dynamic debug messages. As a side effect all CONFIG_BT_*_DEBUG statements are now removed and some broken debug entries have been fixed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Send HCI Reset command by default on device initializationMarcel Holtmann2008-11-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Bluetooth subsystem was not using the HCI Reset command when doing device initialization. The Bluetooth 1.0b specification was ambiguous on how the device firmware was suppose to handle it. Almost every device was triggering a transport reset at the same time. In case of USB this ended up in disconnects from the bus. All modern Bluetooth dongles handle this perfectly fine and a lot of them actually require that HCI Reset is sent. If not then they are either stuck in their HID Proxy mode or their internal structures for inquiry and paging are not correctly setup. To handle old and new devices smoothly the Bluetooth subsystem contains a quirk to force the HCI Reset on initialization. However maintaining such a quirk becomes more and more complicated. This patch turns the logic around and lets the old devices disable the HCI Reset command. The only device where the HCI_QUIRK_NO_RESET is still needed are the original Digianswer devices and dongles with an early CSR firmware. CSR reported that they fixed this for version 12 firmware. The last official release of version 11 firmware is build ID 115. The first version 12 candidate was build ID 117. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* include: replace __FUNCTION__ with __func__Harvey Harrison2008-10-161-2/+2
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [Bluetooth] Reject L2CAP connections on an insecure ACL linkMarcel Holtmann2008-09-091-0/+1
| | | | | | | | | | | | | | | | | | | | | The Security Mode 4 of the Bluetooth 2.1 specification has strict authentication and encryption requirements. It is the initiators job to create a secure ACL link. However in case of malicious devices, the acceptor has to make sure that the ACL is encrypted before allowing any kind of L2CAP connection. The only exception here is the PSM 1 for the service discovery protocol, because that is allowed to run on an insecure ACL link. Previously it was enough to reject a L2CAP connection during the connection setup phase, but with Bluetooth 2.1 it is forbidden to do any L2CAP protocol exchange on an insecure link (except SDP). The new hci_conn_check_link_mode() function can be used to check the integrity of an ACL link. This functions also takes care of the cases where Security Mode 4 is disabled or one of the devices is based on an older specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Enforce correct authentication requirementsMarcel Holtmann2008-09-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the introduction of Security Mode 4 and Simple Pairing from the Bluetooth 2.1 specification it became mandatory that the initiator requires authentication and encryption before any L2CAP channel can be established. The only exception here is PSM 1 for the service discovery protocol (SDP). It is meant to be used without any encryption since it contains only public information. This is how Bluetooth 2.0 and before handle connections on PSM 1. For Bluetooth 2.1 devices the pairing procedure differentiates between no bonding, general bonding and dedicated bonding. The L2CAP layer wrongly uses always general bonding when creating new connections, but it should not do this for SDP connections. In this case the authentication requirement should be no bonding and the just-works model should be used, but in case of non-SDP connection it is required to use general bonding. If the new connection requires man-in-the-middle (MITM) protection, it also first wrongly creates an unauthenticated link key and then later on requests an upgrade to an authenticated link key to provide full MITM protection. With Simple Pairing the link key generation is an expensive operation (compared to Bluetooth 2.0 and before) and doing this twice during a connection setup causes a noticeable delay when establishing a new connection. This should be avoided to not regress from the expected Bluetooth 2.0 connection times. The authentication requirements are known up-front and so enforce them. To fulfill these requirements the hci_connect() function has been extended with an authentication requirement parameter that will be stored inside the connection information and can be retrieved by userspace at any time. This allows the correct IO capabilities exchange and results in the expected behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Store remote modem status for RFCOMM TTYMarcel Holtmann2008-07-141-0/+1
| | | | | | | | | | When switching a RFCOMM socket to a TTY, the remote modem status might be needed later. Currently it is lost since the original configuration is done via the socket interface. So store the modem status and reply it when the socket has been converted to a TTY. Signed-off-by: Denis Kenzior <denis.kenzior@trolltech.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCOMarcel Holtmann2008-07-141-0/+1
| | | | | | | | | Enable the common timestamp functionality that the network subsystem provides for L2CAP, RFCOMM and SCO sockets. It is possible to either use SO_TIMESTAMP or the IOCTLs to retrieve the timestamp of the current packet. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Export details about authentication requirementsMarcel Holtmann2008-07-142-4/+16
| | | | | | | | | | | | | With the Simple Pairing support, the authentication requirements are an explicit setting during the bonding process. Track and enforce the requirements and allow higher layers like L2CAP and RFCOMM to increase them if needed. This patch introduces a new IOCTL that allows to query the current authentication requirements. It is also possible to detect Simple Pairing support in the kernel this way. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Use ACL config stage to retrieve remote featuresMarcel Holtmann2008-07-142-1/+4
| | | | | | | | | | | | | | | | | | | The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Track status of remote Simple Pairing modeMarcel Holtmann2008-07-142-0/+8
| | | | | | | | | | | | | | | | | | | The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Track status of Simple Pairing modeMarcel Holtmann2008-07-142-0/+12
| | | | | | | | | | | The Simple Pairing feature is optional and needs to be enabled by the host stack first. The Linux kernel relies on the Bluetooth daemon to either enable or disable it, but at any time it needs to know the current state of the Simple Pairing mode. So track any changes made by external entities and store the current mode in the HCI device structure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Disable disconnect timer during Simple PairingMarcel Holtmann2008-07-141-0/+11
| | | | | | | | | During the Simple Pairing process the HCI disconnect timer must be disabled. The way to do this is by holding a reference count of the HCI connection. The Simple Pairing process on both sides starts with an IO Capabilities Request and ends with Simple Pairing Complete. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Make use of the default link policy settingsMarcel Holtmann2008-07-141-0/+11
| | | | | | | | | | The Bluetooth specification supports the default link policy settings on a per host controller basis. For every new connection the link manager would then use these settings. It is better to use this instead of bothering the controller on every connection setup to overwrite the default settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Track connection packet type changesMarcel Holtmann2008-07-142-0/+10
| | | | | | | | | | | | | | | | | | | | The connection packet type can be changed after the connection has been established and thus needs to be properly tracked to ensure that the host stack has always correct and valid information about it. On incoming connections the Bluetooth core switches the supported packet types to the configured list for this controller. However the usefulness of this feature has been questioned a lot. The general consent is that every Bluetooth host stack should enable as many packet types as the hardware actually supports and leave the decision to the link manager software running on the Bluetooth chip. When running on Bluetooth 2.0 or later hardware, don't change the packet type for incoming connections anymore. This hardware likely supports Enhanced Data Rate and thus leave it completely up to the link manager to pick the best packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Disconnect when encryption gets disabledMarcel Holtmann2008-07-141-5/+5
| | | | | | | | | | The Bluetooth specification allows to enable or disable the encryption of an ACL link at any time by either the peer or the remote device. If a L2CAP or RFCOMM connection requested an encrypted link, they will now disconnect that link if the encryption gets disabled. Higher protocols that don't care about encryption (like SDP) are not affected. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Enforce security for outgoing RFCOMM connectionsMarcel Holtmann2008-07-141-0/+1
| | | | | | | | | | | | | | | | | | | Recent tests with various Bluetooth headsets have shown that some of them don't enforce authentication and encryption when connecting. All of them leave it up to the host stack to enforce it. Non of them should allow unencrypted connections, but that is how it is. So in case the link mode settings require authentication and/or encryption it will now also be enforced on outgoing RFCOMM connections. Previously this was only done for incoming connections. This support has a small drawback from a protocol level point of view since the host stack can't really tell with 100% certainty if a remote side is already authenticated or not. So if both sides are configured to enforce authentication it will be requested twice. Most Bluetooth chips are caching this information and thus no extra authentication procedure has to be triggered over-the-air, but it can happen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* bluetooth: Make hci_sock_cleanup() return voidTobias Klauser2008-03-061-1/+1
| | | | | | | | | | | hci_sock_cleanup() always returns 0 and its return value isn't used anywhere in the code. Compile-tested with 'make allyesconfig && make net/bluetooth/bluetooth.ko' Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marcel Holtmann <marcel@holtmann.org>
* [NET]: Remove FASTCALL macroHarvey Harrison2008-01-281-2/+2
| | | | | | | | X86_32 was the last user of the FASTCALL macro, now that it uses regparm(3) by default, this macro expands to nothing. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [Bluetooth] Add support for handling simple eSCO linksMarcel Holtmann2007-10-221-0/+1
| | | | | | | | | | With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Fall back to L2CAP in basic modeMarcel Holtmann2007-10-221-0/+13
| | | | | | | In case the remote entity tries to negogiate retransmission or flow control mode, reject it and fall back to basic mode. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Retrieve L2CAP features mask on connection setupMarcel Holtmann2007-10-221-2/+12
| | | | | | | | | | The Bluetooth 1.2 specification introduced a specific features mask value to interoperate with newer versions of the specification. So far this piece of information was never needed, but future extensions will rely on it. This patch adds a generic way to retrieve this information only once per connection setup. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Remove global conf_mtu variable from L2CAPMarcel Holtmann2007-10-221-5/+5
| | | | | | | After the change to the L2CAP configuration parameter handling the global conf_mtu variable is no longer needed and so remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Switch from OGF+OCF to using only opcodesMarcel Holtmann2007-10-222-257/+359
| | | | | | | | | | | | The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [BLUETOOTH] l2cap: endianness annotationsAl Viro2007-07-311-25/+25
| | | | | | | | no code changes, just documenting existing types Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [Bluetooth] Add basics to better support and handle eSCO linksMarcel Holtmann2007-07-112-2/+18
| | | | | | | | To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Keep rfcomm_dev on the list until it is freedVille Tervo2007-07-111-0/+1
| | | | | | | | | This patch changes the RFCOMM TTY release process so that the TTY is kept on the list until it is really freed. A new device flag is used to keep track of released TTYs. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Add hci_recv_fragment() helper functionMarcel Holtmann2007-07-111-0/+3
| | | | | | | | Most drivers must handle fragmented HCI data packets and events. This patch adds a generic function for their reassembly to the Bluetooth core layer and thus allows to shrink the complexity of the drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Fix L2CAP configuration parameter handlingMarcel Holtmann2007-05-241-2/+6
| | | | | | | | | The L2CAP configuration parameter handling was missing the support for rejecting unknown options. The capability to reject unknown options is mandatory since the Bluetooth 1.2 specification. This patch implements its and also simplifies the parameter parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [BLUETOOTH]: Introduce skb->data accessor methods for hci_{acl,event,sco}_hdrArnaldo Carvalho de Melo2007-04-261-0/+18
| | | | | | | For consistency with other skb data accessors, reducing the number of direct accesses to skb->data. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* [PATCH] hci endianness annotationsAl Viro2006-12-131-2/+2
| | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [BLUETOOTH]: rfcomm endianness annotationsAl Viro2006-12-031-2/+2
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [Bluetooth] Support concurrent connect requestsMarcel Holtmann2006-10-161-0/+17
| | | | | | | | | | | Most Bluetooth chips don't support concurrent connect requests, because this would involve a multiple baseband page with only one radio. In the case an upper layer like L2CAP requests a concurrent connect these chips return the error "Command Disallowed" for the second request. If this happens it the responsibility of the Bluetooth core to queue the request and try again after the previous connect attempt has been completed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Support create connection cancel commandMarcel Holtmann2006-09-292-3/+12
| | | | | | | | | | | | In case of non-blocking connects it is possible that the last user of an ACL link quits before the connection has been fully established. This will lead to a race condition where the internal state of a connection is closed, but the actual link has been established and is active. In case of Bluetooth 1.2 and later devices it is possible to call create connection cancel to abort the connect. For older devices the disconnect timer will be used to trigger the needed disconnect. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Read local version information on device initMarcel Holtmann2006-09-291-0/+3
| | | | | | | | The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Handle command complete event for exit periodic inquiryMarcel Holtmann2006-09-291-0/+2
| | | | | | | The command complete event of the exit periodic inquiry command must clear the HCI_INQUIRY flag and finish the HCI request. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Add HCI device identifier for SDIO cardsMarcel Holtmann2006-09-291-1/+2
| | | | | | | This patch assigns the next free HCI device identifier to Bluetooth devices based on the SDIO interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-19 07:25:11 +0100