summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) supportAntonino A. Daplas2005-09-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Coordinated Video Timings (CVT) is the latest standard approved by VESA concerning video timings generation. It addresses the limitation of GTF which is designed mainly for CRT displays. CRT's have a high blanking requirement (as much as 25% of the horizontal frame length) which artificially increases the pixelclock. Digital displays, on the other hand, needs to conserve the pixelclock as much as possible. The GTF also does not take into account the different aspect ratios in its calculation. The new function added is fb_find_mode_cvt(). It is called by fb_find_mode() if it recognizes a mode option string formatted for CVT. The format is: <xres>x<yres>[M][R][-<bpp>][<at-sign><refresh>][i][m] The 'M' tells the function to calculate using CVT. On it's own, it will compute a timing for CRT displays at 60Hz. If the 'R' is specified, 'reduced blanking' computation will be used, best for flatpanels. The 'i' and the 'm' is for 'interlaced mode' and 'with margins' respectively. To determine if CVT was used, check for dmesg for something like this: CVT Mode - <pix>M<n>[-R], ie: .480M3-R (800x600 reduced blanking) where: pix - product of xres and yres, in MB M - is a CVT mode n - the aspect ratio (3 - 4:3; 4 - 5:4; 9 - 16:9, 15:9; A - 16:10) -R - reduced blanking Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] framebuffer: new driver for cyberblade/i1 graphics coreKnut Petersen2005-09-091-0/+171
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a framebuffer driver for the Cyberblade/i1 graphics core. Currently tridenfb claims to support the cyberblade/i1 graphics core. This is of very limited truth. Even vesafb is faster and provides more working modes and a much better quality of the video signal. There is a great number of bugs in tridentfb ... but most often it is impossible to decide if these bugs are real bugs or if fixing them for the cyberblade/i1 core would break support for one of the other supported chips. Tridentfb seems to be unmaintained,and documentation for most of the supported chips is not available. So "fixing" cyberblade/i1 support inside of tridentfb was not an option, it would have caused numerous if(CYBERBLADEi1) else ... cases and would have rendered the code to be almost unmaintainable. A first version of this driver was published on 2005-07-31. A fix for a bug reported by Jochen Hein was integrated as well as some changes requested by Antonino A. Daplas. A message has been added to tridentfb to inform current users of tridentfb to switch to cyblafb if the cyberblade/i1 graphics core is detected. This patch is one logical change, but because of the included documentation it is bigger than 70kb. Therefore it is not sent to lkml and linux-fbdev-devel, Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Cc: Muli Ben-Yehuda <mulix@mulix.org> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sisfb updateThomas Winischhofer2005-09-092-81/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This lifts sisfb from version 1.7.17 to version 1.8.9. Changes include: - Added support for XGI V3XT, V5, V8, Z7 chipsets, including POSTing of all of these chipsets. - Added support for latest SiS chipsets (761). - Added support for SiS76x memory "hybrid" mode. - Added support for new LCD resolutions (eg 1280x854, 856x480). - Fixed support for 320x240 STN panels (for embedded devices). - Fixed many HDTV modes (525p, 750p, 1080i). - Fixed PCI config register reading/writing to use proper kernel functions for this purpose. - Fixed PCI ROM handling to use the kernel's proper functions. - Removed lots of "typedef"s. - Removed lots of code which was for X.org/XFree86 only. - Fixed coding style in many places. - Removed lots of 2.4 cruft. - Reduced stack size by unifying two previously separate structs into one. - Added new hooks for memory allocation (for DRM). Now the driver can truly handle multiple cards, including memory management. - Fixed numerous minor bugs. Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Fix greater than 1 bit monochrome color handlingAntonino A. Daplas2005-09-091-1/+2
| | | | | | | | | | | Currently, fbcon assumes that the visual FB_VISUAL_MONO* is always 1 bit. According to Geert, there are old hardware where it's possible to have monochrome at 8-bit, but has only 2 colors, black - 0x00 and white - 0xff. Fix color handlers (fb_get_color_depth, and get_color) for this special case. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Resurrect hooks to get EDID from firmwareAntonino A. Daplas2005-09-091-1/+3
| | | | | | | | | | | | | For the i386, code is already present in video.S that gets the EDID from the video BIOS. Make this visible so drivers can also use this data as fallback when i2c does not work. To ensure that the EDID block is returned for the primary graphics adapter only, by check if the IORESOURCE_ROM_SHADOW flag is set. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] vesafb: Add blanking supportAntonino A. Daplas2005-09-091-1/+2
| | | | | | | | | | Add rudimentary support by manipulating the VGA registers. However, not all vesa modes are VGA compatible, so VGA compatiblity is checked first. Only 2 levels are supported, powerup and powerdown. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Add fbset -a supportAntonino A. Daplas2005-09-091-0/+3
| | | | | | | | | Add capability to fbdev to listen to the FB_ACTIVATE_ALL flag. If set, it notifies fbcon that all consoles must be set to the current var. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] files: files struct with RCUDipankar Sarma2005-09-093-3/+17
| | | | | | | | | | | | | | | | | | | | | Patch to eliminate struct files_struct.file_lock spinlock on the reader side and use rcu refcounting rcuref_xxx api for the f_count refcounter. The updates to the fdtable are done by allocating a new fdtable structure and setting files->fdt to point to the new structure. The fdtable structure is protected by RCU thereby allowing lock-free lookup. For fd arrays/sets that are vmalloced, we use keventd to free them since RCU callbacks can't sleep. A global list of fdtable to be freed is not scalable, so we use a per-cpu list. If keventd is already handling the current cpu's work, we use a timer to defer queueing of that work. Since the last publication, this patch has been re-written to avoid using explicit memory barriers and use rcu_assign_pointer(), rcu_dereference() premitives instead. This required that the fd information is kept in a separate structure (fdtable) and updated atomically. Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] files: break up files structDipankar Sarma2005-09-092-12/+24
| | | | | | | | | | | | | | | In order for the RCU to work, the file table array, sets and their sizes must be updated atomically. Instead of ensuring this through too many memory barriers, we put the arrays and their sizes in a separate structure. This patch takes the first step of putting the file table elements in a separate structure fdtable that is embedded withing files_struct. It also changes all the users to refer to the file table using files_fdtable() macro. Subsequent applciation of RCU becomes easier after this. Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] files: rcuref APIsDipankar Sarma2005-09-091-0/+220
| | | | | | | | | | Adds a set of primitives to do reference counting for objects that are looked up without locks using RCU. Signed-off-by: Ravikiran Thirumalai <kiran_th@gmail.com> Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] files: fix rcu initializersDipankar Sarma2005-09-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First of a number of files_lock scaability patches. Here are the x86 numbers - tiobench on a 4(8)-way (HT) P4 system on ramdisk : (lockfree) Test 2.6.10-vanilla Stdev 2.6.10-fd Stdev ------------------------------------------------------------- Seqread 1400.8 11.52 1465.4 34.27 Randread 1594 8.86 2397.2 29.21 Seqwrite 242.72 3.47 238.46 6.53 Randwrite 445.74 9.15 446.4 9.75 The performance improvement is very significant. We are getting killed by the cacheline bouncing of the files_struct lock here. Writes on ramdisk (ext2) seems to vary just too much to get any meaningful number. Also, With Tridge's thread_perf test on a 4(8)-way (HT) P4 xeon system : 2.6.12-rc5-vanilla : Running test 'readwrite' with 8 tasks Threads 0.34 +/- 0.01 seconds Processes 0.16 +/- 0.00 seconds 2.6.12-rc5-fd : Running test 'readwrite' with 8 tasks Threads 0.17 +/- 0.02 seconds Processes 0.17 +/- 0.02 seconds I repeated the measurements on ramfs (as opposed to ext2 on ramdisk in the earlier measurement) and I got more consistent results from tiobench : 4(8) way xeon P4 ----------------- (lock-free) Test 2.6.12-rc5 Stdev 2.6.12-rc5-fd Stdev ------------------------------------------------------------- Seqread 1282 18.59 1343.6 26.37 Randread 1517 7 2415 34.27 Seqwrite 702.2 5.27 709.46 5.9 Randwrite 846.86 15.15 919.68 21.4 4-way ppc64 ------------ (lock-free) Test 2.6.12-rc5 Stdev 2.6.12-rc5-fd Stdev ------------------------------------------------------------- Seqread 1549 91.16 1569.6 47.2 Randread 1473.6 25.11 1585.4 69.99 Seqwrite 1096.8 20.03 1136 29.61 Randwrite 1189.6 4.04 1275.2 32.96 Also running Tridge's thread_perf test on ppc64 : 2.6.12-rc5-vanilla -------------------- Running test 'readwrite' with 4 tasks Threads 0.20 +/- 0.02 seconds Processes 0.16 +/- 0.01 seconds 2.6.12-rc5-fd -------------------- Running test 'readwrite' with 4 tasks Threads 0.18 +/- 0.04 seconds Processes 0.16 +/- 0.01 seconds The benefits are huge (upto ~60%) in some cases on x86 primarily due to the atomic operations during acquisition of ->file_lock and cache line bouncing in fast path. ppc64 benefits are modest due to LL/SC based locking, but still statistically significant. This patch: RCU head initilizer no longer needs the head varible name since we don't use list.h lists anymore. Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] v4l: tveeprom improved to support newer Hauppage cardsMauro Carvalho Chehab2005-09-091-2/+6
| | | | | | | | | | - tveeprom improved and updated to reflect newer Hauppage cards. - CodingStyle fixes. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] v4l: Remove kernel version dependency from tea575x-tuner.hMauro Carvalho Chehab2005-09-091-2/+0Star
| | | | | | | - Removed kernel version dependency from tea575x-tuner.h Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] v4l: include saa6588 compiler option and files / fixes comments on ↵Mauro Carvalho Chehab2005-09-091-1/+1
| | | | | | | | | | | tuner.h - Include saa6588 compiler option and files. - Fix comment on tuner.h - linux/utsname.h replaced by linux/version.h to compile on vanilla 2.6.13 Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] v4l: normalize whitespace and comments in tuner listsMauro Carvalho Chehab2005-09-091-85/+85
| | | | | | | | | - normalize whitespace and comments in tuner lists Signed-off-by: Philip Rowlands <phr@doc.ic.ac.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] v4l: common part Updates and tuner additionsMauro Carvalho Chehab2005-09-098-24/+16Star
| | | | | | | | | | | | | | | | | | | | | | | | - Remove $Id CVS logs for V4L files - Included newer cards. - Added a new NEC protocol for ir based on pulse distance. - Enable ATSC support for DViCO FusionHDTV5 Gold. - Added tuner LG NTSC (TALN mini series). - Fixed tea5767 autodetection. - Resolve more tuner types. - Commented debug function removed from mainstream. - Remove comments from mainstream. Still on development tree. - linux/version dependencies removed. - BTSC Lang1 now is set to auto_stereo mode. - New tuner standby API. - i2c-core.c uses hexadecimal for the i2c address, so it should stay consistent. Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pcmcia: add pcmcia to IRQ informationBrice Goglin2005-09-091-0/+2
| | | | | | | | | | | Add a devname parameter to the pcmcia_device structure, fills it with "pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in pcmcia_request_irq. Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] yenta: share code with PCI coreDominik Brodowski2005-09-091-0/+1
| | | | | | | | | | | | Share code between setup-bus.c and yenta_socket.c: use the write-out code of resources to the bridge also in yenta_socket.c, as it provides useful debug output. In addition, it fixes the bug that the CPU-centric resource view might need to be transferred to the PCI-centric view: setup-bus.c does that, while yenta-socket.c did not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: remove version.h dependenciesOlaf Hering2005-09-091-12/+1Star
| | | | | | | | | | Remove all #include <linux/version.h> and all references to LINUX_VERSION_CODE and KERNEL_VERSION. Based on patch by Olaf Hering. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix reboot via keyboard controller resetTruxton Fulton2005-09-091-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | I have a system (Biostar IDEQ210M mini-pc with a VIA chipset) which will not reboot unless a keyboard is plugged in to it. I have tried all combinations of the kernel "reboot=x,y" flags to no avail. Rebooting by any method will leave the system in a wedged state (at the "Restarting system" message). I finally tracked the problem down to the machine's refusal to fully reboot unless the keyboard controller status register had bit 2 set. This is the "System flag" which when set, indicates successful completion of the keyboard controller self-test (Basic Assurance Test, BAT). I suppose that something is trying to protect against sporadic reboots unless the keyboard controller is in a good state (a keyboard is present), but I need this machine to be headless. I found that setting the system flag (via the command byte) before giving the "pulse reset line" command will allow the reboot to proceed. The patch is simple, and I think it should be fine for everybody whether they have this type of machine or not. This affects the "hard" reboot (as done when the kernel boot flags "reboot=c,h" are used). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove unnecessary handle_IRQ_event() prototypesKenji Kaneshige2005-09-094-15/+0Star
| | | | | | | | | The function prototype for handle_IRQ_event() in a few architctures is not needed because they use GENERIC_HARDIRQ. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] bfs: fix endianness, signedness; add trivial bugfixAndrew Stribblehill2005-09-091-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Makes BFS code endianness-clean. * Fixes some signedness warnings. * Fixes a problem in fs/bfs/inode.c:164 where inodes not synced to disk don't get fully marked as clean. Here's how to reproduce it: # mount -o loop -t bfs /bfs.img /mnt # df -i /mnt Filesystem Inodes IUsed IFree IUse% Mounted on /bfs.img 48 1 47 3% /mnt # df -k /mnt Filesystem 1K-blocks Used Available Use% Mounted on /bfs.img 512 5 508 1% /mnt # cp 60k-archive.zip /mnt/mt.zip # df -k /mnt Filesystem 1K-blocks Used Available Use% Mounted on /bfs.img 512 65 447 13% /mnt # df -i /mnt Filesystem Inodes IUsed IFree IUse% Mounted on /bfs.img 48 2 46 5% /mnt # rm /mnt/mt.zip # echo $? 0 [If the unlink happens before the buffers flush, the following happens:] # df -i /mnt Filesystem Inodes IUsed IFree IUse% Mounted on /bfs.img 48 2 46 5% /mnt # df -k /mnt Filesystem 1K-blocks Used Available Use% Mounted on /bfs.img 512 65 447 13% /mnt fs/bfs/bfs.h | 1 Signed-off-by: Andrew Stribblehill <ads@wompom.org> Cc: <tigran@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Prefetch kernel stacks to speed up context switchChen, Kenneth W2005-09-092-0/+6
| | | | | | | | | | | | | | | For architecture like ia64, the switch stack structure is fairly large (currently 528 bytes). For context switch intensive application, we found that significant amount of cache misses occurs in switch_to() function. The following patch adds a hook in the schedule() function to prefetch switch stack structure as soon as 'next' task is determined. This allows maximum overlap in prefetch cache lines for that structure. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mips: add TANBAC TB0287 supportYoichi Yuasa2005-09-091-0/+43
| | | | | | | | | Add TANBAC TB0287 support. Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ppc32: Kill PVR_440* definesTom Rini2005-09-091-6/+0Star
| | | | | | | | | | | | | | | The following patch changes the usages of PVR_440* into strcmp's with the cpu_name field, and removes the defines altogether. The Ebony portion was briefly tested long ago. One benefit of moving from PVR-tests to string tests in general is that not all CPUs can be on and be able to do this type of comparison. See http://patchwork.ozlabs.org/linuxppc/patch?id=1250 for the original thread. Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove the inode_post_link and inode_post_rename LSM hooksStephen Smalley2005-09-091-49/+0Star
| | | | | | | | | This patch removes the inode_post_link and inode_post_rename LSM hooks as they are unused (and likely useless). Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Remove security_inode_post_create/mkdir/symlink/mknod hooksStephen Smalley2005-09-091-90/+0Star
| | | | | | | | | | | | | | This patch removes the inode_post_create/mkdir/mknod/symlink LSM hooks as they are obsoleted by the new inode_init_security hook that enables atomic inode security labeling. If anyone sees any reason to retain these hooks, please speak now. Also, is anyone using the post_rename/link hooks; if not, those could also be removed. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] security: enable atomic inode security labelingStephen Smalley2005-09-091-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch set enables atomic security labeling of newly created inodes by altering the fs code to invoke a new LSM hook to obtain the security attribute to apply to a newly created inode and to set up the incore inode security state during the inode creation transaction. This parallels the existing processing for setting ACLs on newly created inodes. Otherwise, it is possible for new inodes to be accessed by another thread via the dcache prior to complete security setup (presently handled by the post_create/mkdir/... LSM hooks in the VFS) and a newly created inode may be left unlabeled on the disk in the event of a crash. SELinux presently works around the issue by ensuring that the incore inode security label is initialized to a special SID that is inaccessible to unprivileged processes (in accordance with policy), thereby preventing inappropriate access but potentially causing false denials on legitimate accesses. A simple test program demonstrates such false denials on SELinux, and the patch solves the problem. Similar such false denials have been encountered in real applications. This patch defines a new inode_init_security LSM hook to obtain the security attribute to apply to a newly created inode and to set up the incore inode security state for it, and adds a corresponding hook function implementation to SELinux. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386: CONFIG_ACPI_SRAT typo fixMagnus Damm2005-09-091-1/+1
| | | | | | | | Fix a typo involving CONFIG_ACPI_SRAT. Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 Linus Torvalds2005-09-0938-310/+179Star
|\
| * [PATCH] Separate pci bits out of struct device_nodePaul Mackerras2005-09-092-24/+40
| | | | | | | | | | | | | | | | | | | | | | This patch pulls the PCI-related junk out of struct device_node and puts it in a separate structure, struct pci_dn. The device_node now just has a void * pointer in it, which points to a struct pci_dn for nodes that represent PCI devices. It could potentially be used in future for device-specific data for other sorts of devices, such as virtual I/O devices. Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] ppc64: remove use of asm/segment.hKumar Gala2005-09-091-6/+0Star
| | | | | | | | | | | | | | Remove asm-ppc64/segment.h now that all users are gone. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Fix __power64__ typos that should be __powerpc64__jdl@freescale.com2005-09-091-4/+4
| | | | | | | | | | | | | | | | Fix __power64__ typo that should be __powerpc64__ instead. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Merge a few more include filesjdl@freescale.com2005-09-0913-201/+61Star
| | | | | | | | | | | | | | | | | | | | | | Merge a few asm-ppc and asm-ppc64 header files. Note: the merge of setup.h intentionally does not carry forward the m68k cruft. That means this patch continues to break the already broken amiga on the ppc32. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Make check_bugs() static inlinejdl@freescale.com2005-09-091-1/+1
| | | | | | | | | | | | | | | | Make check_bugs() static inline and remove it from syscalls.c. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Standardize on _ASM_POWERPC header symbol prefixjdl@freescale.com2005-09-0922-74/+73Star
| | | | | | | | | | | | | | | | | | Standardize on _ASM_POWERPC_... prefix for all #include exclusion symbols. Fixup all the non-compilers. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] basic iomem annotations (ppc64)viro@ZenIV.linux.org.uk2005-09-092-40/+41
|/ | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: include ColdFire 523x processor register definitionsGreg Ungerer2005-09-091-2/+4
| | | | | | | | Include the ColdFire 523x register definitions when compiling for that target processor. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: include support for the ColdFire 523x processor UARTsGreg Ungerer2005-09-091-1/+1
| | | | | | | | Add support definitions for the integrated UARTs on the 523x ColdFire processor family. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: defines to support the ColdFire 523x processorGreg Ungerer2005-09-091-2/+4
| | | | | | | | Add processor level and clock support defines for the ColdFire 523x processor. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: ColdFire 523x processor register definitionsGreg Ungerer2005-09-091-0/+46
| | | | | | | ColdFire 523x processor hardware register definitions. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'release' of ↵Linus Torvalds2005-09-092-8/+0Star
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
| * [IA64] Manual merge fix for 3 filesTony Luck2005-09-08285-8086/+7450Star
| |\ | | | | | | | | | | | | | | | | | | | | | arch/ia64/Kconfig arch/ia64/kernel/acpi.c include/asm-ia64/irq.h Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] Minor cleanups - remove unnecessary function prototype in iosapic.hKenji Kaneshige2005-09-071-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function prototypes for iosapic_enable_intr() and iosapic_pci_fixup() in include/asm-ia64/iosapic.h are no longer needed. This patch removes them. The original patch has been posted by Satoru Takeuchi. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] Minor cleanups - remove CONFIG_ACPI_DEALLOCATE_IRQKenji Kaneshige2005-09-071-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | The config option 'CONFIG_ACPI_DEALLOCATE_IRQ' is no longer needed. This patch removes it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] Minor cleanups - remove unnecessary function prototype in irq.hKenji Kaneshige2005-09-071-4/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | The function prototype for handl_IRQ_event() in include/asm-ia64/irq.h is no longer needed. This patch removes it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 Linus Torvalds2005-09-092-32/+9Star
|\ \ \
| * | | [PATCH] USB: URB_ASYNC_UNLINK flag removed from the kernelAlan Stern2005-09-091-8/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 29 July 2005, Cambridge, MA: This afternoon Alan Stern submitted a patch to remove the URB_ASYNC_UNLINK flag from the Linux kernel. Mr. Stern explained, "This flag is a relic from an earlier, less-well-designed system. For over a year it hasn't been used for anything other than printing warning messages." An anonymous spokesman for the Linux kernel development community commented, "This is exactly the sort of thing we see happening all the time. As the kernel evolves, support for old techniques and old code can be jettisoned and replaced by newer, better approaches. Proprietary operating systems do not have the freedom or flexibility to change so quickly." Mr. Stern, a staff member at Harvard University's Rowland Institute who works on Linux only as a hobby, noted that the patch (labelled as548) did not update two files, keyspan.c and option.c, in the USB drivers' "serial" subdirectory. "Those files need more extensive changes," he remarked. "They examine the status field of several URBs at times when they're not supposed to. That will need to be fixed before the URB_ASYNC_UNLINK flag is removed." Greg Kroah-Hartman, the kernel maintainer responsible for overseeing all of Linux's USB drivers, did not respond to our inquiries or return our calls. His only comment was "Applied, thanks." Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] USB: isp116x-hcd: remove clock() and reset()Olav Kongas2005-09-091-9/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes support for user-provided platform-specific hardware reset and clock starting/stopping functions. Hardware reset was needed earlier as getting the software reset working was tricky due to the lack of documentation. Recently, a number of people using isp116x have said the software reset is working for them. I haven't heard of anybody using the clock starting/stopping. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] USB: isp116x-hcd: per-port overcurrent reportingOlav Kongas2005-09-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets the isp116x to report overcurrent always per-port. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-19 00:24:57 +0200