summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* USB: use kfifo to buffer usb-generic serial writesDavid VomLehn2009-09-231-0/+2
| | | | | | | | | | | | | | | | | | When do_output_char() attempts to write a carriage return/line feed sequence, it first checks to see how much buffer room is available. If there are at least two characters free, it will write the carriage return/line feed with two calls to tty_put_char(). It calls the tty_operation functions write() for devices that don't support the tty_operations function put_char(). If the USB generic serial device's write URB is not in use, it will return the buffer size when asked how much room is available. The write() of the carriage return will cause it to mark the write URB busy, so the subsequent write() of the line feed will be ignored. This patch uses the kfifo infrastructure to implement a write FIFO that accurately returns the amount of space available in the buffer. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: audio: guard kernel-only code with __KERNEL__Michael S. Tsirkin2009-09-231-0/+4
| | | | | | | | | | | include/linux/usb/audio.h is exported to userspace, so part of this file that is for internal kernel usage need to be guarded with ifdef __KERNEL__. This way make headers_install will stript it out. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: NXP ISP1362 USB host driverLothar Wassmann2009-09-231-0/+46
| | | | | | | | | Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: isp1760: allow platform devices to customize devflagsMichael Hennerich2009-09-231-0/+18
| | | | | | | | | | | | | Platform device support was merged earlier, but support for boards to customize the devflags aspect of the controller was not. We want this on Blackfin systems to control the bus width, but might as well expose all of the fields while we're at it. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: Add Intel Moorestown EHCI controller HOSTPCx extensions and ↵Alek Du2009-09-231-0/+13
| | | | | | | | | | | | | | | | support phy low power mode The Intel Moorestown EHCI controller supports non-standard HOSTPCx register extension. This register controls the LPM behaviour and controls the behaviour of each USB port. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: make intf.pm_usage an atomic_tAlan Stern2009-09-231-3/+3
| | | | | | | | | | | | | This patch (as1260) changes the pm_usage_cnt field in struct usb_interface from an int to an atomic_t. This is so that drivers can invoke the usb_autopm_get_interface_async() and usb_autopm_put_interface_async() routines without locking and without fear of corrupting the pm_usage_cnt value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add API for userspace drivers to "claim" portsAlan Stern2009-09-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1258) implements a feature that users have been asking for: It gives programs the ability to "claim" a port on a hub, via a new usbfs ioctl. A device plugged into a "claimed" port will not be touched by the kernel beyond the immediate necessities of initialization and enumeration. In particular, when a device is plugged into a "claimed" port, the kernel will not select and install a configuration. And when a config is installed by usbfs or sysfs, the kernel will not probe any drivers for any of the interfaces. (However the kernel will fetch various string descriptors during enumeration. One could argue that this isn't really necessary, but the strings are exported in sysfs.) The patch does not guarantee exclusive access to these devices; it is still possible for more than one program to open the device file concurrently. Programs are responsible for coordinating access among themselves. A demonstration program showing how to use the new interface can be found in an attachment to http://marc.info/?l=linux-usb&m=124345857431452&w=2 The patch also makes a small simplification to the hub driver, replacing a bunch of more-or-less useless variants of "out of memory" with a single message. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB audio gadget: Un-inline generic_[gs]et_cmdLaurent Pinchart2009-09-231-12/+0Star
| | | | | | | | Those functions are used only used to fill the set/get members of usb_audio_control. It doesn't make much sense to inline them. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB audio gadget: Prefix all macro definitions with UAC_ in linux/usb/audio.hLaurent Pinchart2009-09-231-126/+132
| | | | | | | | | | linux/usb/audio.h is a public header file that includes definitions exported to userspace. To avoid namespace clashes, prefix all macro definitions with UAC_. Existing macros and structures prefixed with USB_AC_ and USB_AS_ are renamed for consistency. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Move vendor subclass definition from usb/audio.h to usb/ch9.hLaurent Pinchart2009-09-232-1/+2
| | | | | | | | USB_SUBCLASS_VENDOR_SPEC is common to several USB classes and as such belongs to usb/ch9.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Move endpoint sync type definitions from usb/audio.h to usb/ch9.hLaurent Pinchart2009-09-232-10/+6Star
| | | | | | | | And use the new definitions in the USB Audio Class gadget driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usbmon: end ugly tricks with DMA peekingPete Zaitcev2009-09-231-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes crashes when usbmon attempts to access GART aperture. The old code attempted to take a bus address and convert it into a virtual address, which clearly was impossible on systems with actual IOMMUs. Let us not persist in this foolishness, and use transfer_buffer in all cases instead. I think downsides are negligible. The ones I see are: - A driver may pass an address of one buffer down as transfer_buffer, and entirely different entity mapped for DMA, resulting in misleading output of usbmon. Note, however, that PIO based controllers would do transfer the same data that usbmon sees here. - Out of tree drivers may crash usbmon if they store garbage in transfer_buffer. I inspected the in-tree drivers, and clarified the documentation in comments. - Drivers that use get_user_pages will not be possible to monitor. I only found one driver with this problem (drivers/staging/rspiusb). - Same happens with with usb_storage transferring from highmem, but it works fine on 64-bit systems, so I think it's not a concern. At least we don't crash anymore. Why didn't we do this in 2.6.10? That's because back in those days it was popular not to fill in transfer_buffer, so almost all traffic would be invisible (e.g. all of HID was like that). But now, the tree is almost 100% PIO friendly, so we can do the right thing at last. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-09-221-1/+4
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vegard/kmemcheck * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vegard/kmemcheck: kmemcheck: add missing braces to do-while in kmemcheck_annotate_bitfield kmemcheck: update documentation kmemcheck: depend on HAVE_ARCH_KMEMCHECK kmemcheck: remove useless check kmemcheck: remove duplicated #include
| * kmemcheck: add missing braces to do-while in kmemcheck_annotate_bitfieldJohannes Berg2009-09-211-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | Whether or not the sparse warning warning: do-while statement is not a compound statement is justified or not in this case, it is annoying and trivial to fix. [vegard.nossum@gmail.com: title and cleanup] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
* | Merge branch 'for-2.6.32' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2009-09-2213-105/+200
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.32' of git://linux-nfs.org/~bfields/linux: (68 commits) nfsd4: nfsv4 clients should cross mountpoints nfsd: revise 4.1 status documentation sunrpc/cache: avoid variable over-loading in cache_defer_req sunrpc/cache: use list_del_init for the list_head entries in cache_deferred_req nfsd: return success for non-NFS4 nfs4_state_start nfsd41: Refactor create_client() nfsd41: modify nfsd4.1 backchannel to use new xprt class nfsd41: Backchannel: Implement cb_recall over NFSv4.1 nfsd41: Backchannel: cb_sequence callback nfsd41: Backchannel: Setup sequence information nfsd41: Backchannel: Server backchannel RPC wait queue nfsd41: Backchannel: Add sequence arguments to callback RPC arguments nfsd41: Backchannel: callback infrastructure nfsd4: use common rpc_cred for all callbacks nfsd4: allow nfs4 state startup to fail SUNRPC: Defer the auth_gss upcall when the RPC call is asynchronous nfsd4: fix null dereference creating nfsv4 callback client nfsd4: fix whitespace in NFSPROC4_CLNT_CB_NULL definition nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel sunrpc/cache: simplify cache_fresh_locked and cache_fresh_unlocked. ...
| * | nfsd: return success for non-NFS4 nfs4_state_startStephen Rothwell2009-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Today's linux-next build (sparc64_defconfig) failed like this: In file included from arch/sparc/kernel/sys_sparc32.c:32: include/linux/nfsd/nfsd.h: In function 'nfs4_state_start': include/linux/nfsd/nfsd.h:177: error: no return statement in function returning non-void Caused by commit 29ab23cc5d351658d01a4327d55e9106a73fd04f ("nfsd4: allow nfs4 state startup to fail"). Please, if you add code that depends on a CONFIG option, build with that option enabled and disabled. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: Backchannel: Setup sequence informationRicardo Labiaga2009-09-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follows the model used by the NFS client. Setup the RPC prepare and done function pointers so that we can populate the sequence information if minorversion == 1. rpc_run_task() is then invoked directly just like existing NFS client operations do. nfsd4_cb_prepare() determines if the sequence information needs to be setup. If the slot is in use, it adds itself to the wait queue. nfsd4_cb_done() wakes anyone sleeping on the callback channel wait queue after our RPC reply has been received. It also sets the task message result pointer to NULL to clearly indicate we're done using it. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> [define and initialize cl_cb_seq_nr here] [pulled out unused defintion of nfsd4_cb_done] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: Backchannel: Server backchannel RPC wait queueRicardo Labiaga2009-09-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | RPC callback requests will wait on this wait queue if the backchannel is out of slots. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: Backchannel: Add sequence arguments to callback RPC argumentsRicardo Labiaga2009-09-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follow the model we use in the client. Make the sequence arguments part of the regular RPC arguments. None of the callbacks that are soon to be implemented expect results that need to be passed back to the caller, so we don't define a separate RPC results structure. For session validation, the cb_sequence decoding will use a pointer to the sequence arguments that are part of the RPC argument. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> [define struct nfsd4_cb_sequence here] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: Backchannel: callback infrastructureAndy Adamson2009-09-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep the xprt used for create_session in cl_cb_xprt. Mark cl_callback.cb_minorversion = 1 and remember the client provided cl_callback.cb_prog rpc program number. Use it to probe the callback path. Use the client's network address to initialize as the callback's address as expected by the xprt creation routines. Define xdr sizes and code nfs4_cb_compound header to be able to send a null callback rpc. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> [get callback minorversion from fore channel's] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [pulled definition for cl_cb_xprt] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: set up backchannel's cb_addr] [moved rpc_create_args init to "nfsd: modify nfsd4.1 backchannel to use new xprt class"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd4: use common rpc_cred for all callbacksJ. Bruce Fields2009-09-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Callbacks are always made using the machine's identity, so we can use a single auth_generic credential shared among callbacks to all clients and let the rpc code take care of the rest. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd4: allow nfs4 state startup to failJ. Bruce Fields2009-09-161-2/+2
| | | | | | | | | | | | | | | | | | The failure here is pretty unlikely, but we should handle it anyway. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | SUNRPC: Defer the auth_gss upcall when the RPC call is asynchronousTrond Myklebust2009-09-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Otherwise, the upcall is going to be synchronous, which may not be what the caller wants... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannelAlexandros Batsakis2009-09-134-16/+19
| | | | | | | | | | | | | | | | | | | | | | | | [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: sunrpc: Added rpc server-side backchannel handlingRahul Iyer2009-09-113-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: replace page based DRC with buffer based DRCAndy Adamson2009-09-022-20/+12Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use NFSD_SLOT_CACHE_SIZE size buffers for sessions DRC instead of holding nfsd pages in cache. Connectathon testing has shown that 1024 bytes for encoded compound operation responses past the sequence operation is sufficient, 512 bytes is a little too small. Set NFSD_SLOT_CACHE_SIZE to 1024. Allocate memory for the session DRC in the CREATE_SESSION operation to guarantee that the memory resource is available for caching responses. Allocate each slot individually in preparation for slot table size negotiation. Remove struct nfsd4_cache_entry and helper functions for the old page-based DRC. The iov_len calculation in nfs4svc_encode_compoundres is now always correct. Replay is now done in nfsd4_sequence under the state lock, so the session ref count is only bumped on non-replay. Clean up the nfs4svc_encode_compoundres session logic. The nfsd4_compound_state statp pointer is also not used. Remove nfsd4_set_statp(). Move useful nfsd4_cache_entry fields into nfsd4_slot. Signed-off-by: Andy Adamson <andros@netapp.com Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: bound forechannel drc size by memory usageAndy Adamson2009-09-021-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By using the requested ca_maxresponsesize_cached * ca_maxresponses to bound a forechannel drc request size, clients can tailor a session to usage. For example, an I/O session (READ/WRITE only) can have a much smaller ca_maxresponsesize_cached (for only WRITE compound responses) and a lot larger ca_maxresponses to service a large in-flight data window. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd41: expand solo sequence checkAndy Adamson2009-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Compounds consisting of only a sequence operation don't need any additional caching beyond the sequence information we store in the slot entry. Fix nfsd4_is_solo_sequence to identify this case correctly. The additional check for a failed sequence in nfsd4_store_cache_entry() is redundant, since the nfsd4_is_solo_sequence call lower down catches this case. The final ce_cachethis set in nfsd4_sequence is also redundant. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd: populate sin6_scope_id on callback address with scopeid from rq_addr ↵Jeff Layton2009-08-211-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | on SETCLIENTID call When a SETCLIENTID call comes in, one of the args given is the svc_rqst. This struct contains an rq_addr field which holds the address that sent the call. If this is an IPv6 address, then we can use the sin6_scope_id field in this address to populate the sin6_scope_id field in the callback address. AFAICT, the rq_addr.sin6_scope_id is non-zero if and only if the client mounted the server's link-local address. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd: convert nfs4_cb_conn struct to hold address in sockaddr_storageJeff Layton2009-08-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ...rather than as a separate address and port fields. This will be necessary for implementing callbacks over IPv6. Also, convert gen_callback to use the standard rpcuaddr2sockaddr routine rather than its own private one. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | nfsd: make nfs4_client->cl_addr a struct sockaddr_storageJeff Layton2009-08-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | It's currently a __be32, which isn't big enough to hold an IPv6 address. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | sunrpc: add common routine for copying address portion of a sockaddrJeff Layton2009-08-211-0/+50
| | | | | | | | | | | | | | | | | | Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | sunrpc: add routine for comparing addressesJeff Layton2009-08-212-43/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lockd needs these sort of routines, as does the NFSv4 callback code. Move lockd's routines into common code and rename them so that they can be used by others. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | Merge branch 'nfs-for-2.6.32' of ↵J. Bruce Fields2009-08-21119-593/+1248
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.linux-nfs.org/projects/trondmy/nfs-2.6 into for-2.6.32-incoming Conflicts: net/sunrpc/cache.c
| * | | nfsd41: Use separate DRC for setclientidAndy Adamson2009-07-282-13/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of trying to share the generic 4.1 reply cache code for the CREATE_SESSION reply cache, it's simpler to handle CREATE_SESSION separately. The nfs41 single slot clientid DRC holds the results of create session processing. CREATE_SESSION can be preceeded by a SEQUENCE operation (an embedded CREATE_SESSION) and the create session single slot cache must be maintained. nfsd4_replay_cache_entry() and nfsd4_store_cache_entry() do not implement the replay of an embedded CREATE_SESSION. The clientid DRC slot does not need the inuse, cachethis or other fields that the multiple slot session cache uses. Replace the clientid DRC cache struct nfs4_slot cache with a new nfsd4_clid_slot cache. Save the xdr struct nfsd4_create_session into the cache at the end of processing, and on a replay, replace the struct for the replay request with the cached version all while under the state lock. nfsd4_proc_compound will handle both the solo and embedded CREATE_SESSION case via the normal use of encode_operation. Errors that do not change the create session cache: A create session NFS4ERR_STALE_CLIENTID error means that a client record (and associated create session slot) could not be found and therefore can't be changed. NFSERR_SEQ_MISORDERED errors do not change the slot cache. All other errors get cached. Remove the clientid DRC specific check in nfs4svc_encode_compoundres to put the session only if cstate.session is set which will now always be true. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | nfsd41: hange from page to memory based drc limitsAndy Adamson2009-07-282-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NFSD_SLOT_CACHE_SIZE is the size of all encoded operation responses (excluding the sequence operation) that we want to cache. For now, keep NFSD_SLOT_CACHE_SIZE at PAGE_SIZE. It will be reduced when the DRC is changed from page based to memory based. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | nfsd41: use globals for DRC limitsAndy Adamson2009-07-142-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The version 4.1 DRC memory limit and tracking variables are server wide and session specific. Replace struct svc_serv fields with globals. Stop using the svc_serv sv_lock. Add a spinlock to serialize access to the DRC limit management variables which change on session creation and deletion (usage counter) or (future) administrative action to adjust the total DRC memory limit. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
| * | | nfsd41: gather and report statistics also for v4.1 opsBenny Halevy2009-07-111-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-09-229-10/+9Star
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) trivial: fix typo in aic7xxx comment trivial: fix comment typo in drivers/ata/pata_hpt37x.c trivial: typo in kernel-parameters.txt trivial: fix typo in tracing documentation trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c trivial: remove unnecessary semicolons trivial: Fix duplicated word "options" in comment trivial: kbuild: remove extraneous blank line after declaration of usage() trivial: improve help text for mm debug config options trivial: doc: hpfall: accept disk device to unload as argument trivial: doc: hpfall: reduce risk that hpfall can do harm trivial: SubmittingPatches: Fix reference to renumbered step trivial: fix typos "man[ae]g?ment" -> "management" trivial: media/video/cx88: add __init/__exit macros to cx88 drivers trivial: fix typo in CONFIG_DEBUG_FS in gcov doc trivial: fix missing printk space in amd_k7_smp_check trivial: fix typo s/ketymap/keymap/ in comment trivial: fix typo "to to" in multiple files trivial: fix typos in comments s/DGBU/DBGU/ ...
| * | | | trivial: remove unnecessary semicolonsJoe Perches2009-09-211-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | | trivial: fix typos "man[ae]g?ment" -> "management"Uwe Kleine-Koenig2009-09-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | | trivial: fix typo "to to" in multiple filesAnand Gadiyar2009-09-213-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | | trivial: fix typo "for for" in multiple filesAnand Gadiyar2009-09-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | | Change "useing" -> "using".Dmitri Vorobiev2009-09-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | | trivial: fix typo in namei.h commentOri Avtalion2009-09-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ori Avtalion <ori@avtalion.name> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | | trivial: change address of the libcap source.GeunSik Lim2009-09-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is patch to change ftp site of the libcap source. "ftp://linux.kernel.org" address does not exist. Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-09-221-0/+3
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Remove duplicate Kconfig entry HID: consolidate connect and disconnect into core code HID: fix non-atomic allocation in hid_input_report
| * | | | | HID: consolidate connect and disconnect into core codeJiri Kosina2009-09-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HID core registers input, hidraw and hiddev devices, but leaves unregistering it up to the individual driver, which is not really nice. Let's move all the logic to the core. Reported-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Brian Rogers <brian@xyzw.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | | | pnp: add a shutdown method to pnp driversDavid Härdeman2009-09-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The shutdown method is used by the winbond cir driver to setup the hardware for wake-from-S5. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | lis3: add free-fall/wakeup function via platform_dataDaniel Mack2009-09-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This offers a way for platforms to define flags and thresholds for the free-fall/wakeup functions of the lis302d chips. More registers needed to be seperated as they are specific to the Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-14 00:28:02 +0200