summaryrefslogtreecommitdiffstats
path: root/net/mac80211/trace.h
Commit message (Collapse)AuthorAgeFilesLines
* cfg80211: remove enum ieee80211_bandJohannes Berg2016-04-121-3/+3
| | | | | | | | | This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: synchronize driver rx queues before removing a stationSara Sharon2016-04-051-0/+12
| | | | | | | | | | | | | | | Some devices, like iwlwifi, have RSS queues. This may cause a situation where a disassociation is handled in control path and results in station removal while there are prior RX frames that were still not processed in other queues. When they will be processed the station will be gone, and the frames will be dropped. Add a synchronization interface to avoid that. When driver returns from the synchronization mac80211 may remove the station. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: pass block ack session timeout to to driverSara Sharon2016-01-141-20/+23
| | | | | | | | | | | | Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: allow the driver to send EOSP when neededEmmanuel Grumbach2015-12-041-0/+25
| | | | | | | | | | | | | | | | This can happen when the driver needs to send less frames than expected and then needs to close the SP. Mac80211 still needs to set the more_data properly based on its buffer state (ps_tx_buffer and buffered frames on other TIDs). To that end, refactor the code that delivers frames upon uAPSD trigger frames to be able to get only the more_data bit without actually delivering those frames in case the driver is just asking to set a NDP with EOSP and MORE_DATA bit properly set. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: allow null chandef in tracingArik Nemtsov2015-11-031-5/+5
| | | | | | | | | | | | In TDLS channel-switch operations the chandef can sometimes be NULL. Avoid an oops in the trace code for these cases and just print a chandef full of zeros. Cc: stable@vger.kernel.org Fixes: a7a6bdd0670fe ("mac80211: introduce TDLS channel switch ops") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: remove PM-QoS listenerJohannes Berg2015-10-141-2/+0Star
| | | | | | | | | | As this API has never really seen any use and most drivers don't ever use the value derived from it, remove it. Change the only driver using it (rt2x00) to simply use the DTIM period instead of the "max sleep" time. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach2015-09-221-4/+6
| | | | | | | | | Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: introduce per vif frame registration APIAndrei Otcheretianski2015-09-221-0/+30
| | | | | | | | | | | | | | | Currently the cfg80211's frame registration api receives wdev, however mac80211 assumes per device filter configuration and ignores wdev. Per device filtering is too wasteful, especially for multi-channel devices. Introduce new per vif frame registration API and use it for probe request registrations in ieee80211_mgmt_frame_register() Also call directly to ieee80211_configure_filter instead of using a work since it is now allowed to sleep in ieee80211_mgmt_frame_register. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: extend get_tkip_seq to all keysJohannes Berg2015-05-061-20/+22
| | | | | | | | Extend the function to read the TKIP IV32/IV16 to read the IV/PN for all ciphers in order to allow drivers with full hardware crypto to properly support this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2015-04-151-7/+38
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
| * mac80211: add an intermediate software queue implementationFelix Fietkau2015-04-011-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows drivers to request per-vif and per-sta-tid queues from which they can pull frames. This makes it easier to keep the hardware queues short, and to improve fairness between clients and vifs. The task of scheduling packet transmission is left up to the driver - queueing is controlled by mac80211. Drivers can only dequeue packets by calling ieee80211_tx_dequeue. This makes it possible to add active queue management later without changing drivers using this code. This can also be used as a starting point to implement A-MSDU aggregation in a way that does not add artificially induced latency. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [resolved minor context conflict, minor changes, endian annotations] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: convert rssi_callback() to event_callback()Emmanuel Grumbach2015-03-301-7/+7
| | | | | | | | | | | | | | | | | | | | We will be able to add more events, such as MLME events and others. The low level driver may be interested in knowing about these events to dump firmware data upon failures, or to change parameters in case connection attempts fail etc... Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: Move message tracepoints to their own headerSteven Rostedt (Red Hat)2015-04-071-38/+0Star
|/ | | | | | | | | | | | | | | | | | Every tracing file must have its own TRACE_SYSTEM defined. The mac80211 tracepoint header broke this and add in the middle of the file had: #undef TRACE_SYSTEM #define TRACE_SYSTEM mac80211_msg Unfortunately, this broke new code in the ftrace infrastructure. Moving the mac80211_msg into its own trace file with its own TRACE_SYSTEM defined fixes the issue. Link: http://lkml.kernel.org/r/1428389938.1841.1.camel@sipsolutions.net Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* mac80211: allow drivers to provide most station statisticsJohannes Berg2015-01-081-26/+7Star
| | | | | | | | | | | | | | | | | | | In many cases, drivers can filter things like beacons that will skew statistics reported by mac80211. To get correct statistics in these cases, call drivers to obtain statistics and let them override all values, filling values from mac80211 if the driver didn't provide them. Not all of them make sense for the driver to fill, so some are still always done by mac80211. Note that this doesn't currently allow a driver to say "I know this value is wrong, don't report it at all", or to sum it up with a mac80211 value (as could be useful for "dropped misc"), that can be added if it turns out to be needed. This also gets rid of the get_rssi() method as is can now be implemented using sta_statistics(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: clean up beacon loss CQM eventJohannes Berg2014-11-261-0/+6
| | | | | | | | | | Having it as a sub-event for RSSI thresholds is very ugly, but luckily no userspace actually uses the events yet. Move the event to its own function call internally and to its own event attribute in nl80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: notify drivers on sta rate table changesJohannes Berg2014-11-191-0/+7
| | | | | | | | | This allows drivers with a firmware or chip-based rate lookup table to use the most recent default rate selection without having to get it from per-packet data or explicit ieee80211_get_tx_rate calls Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDRJohannes Berg2014-11-191-6/+25
| | | | | | | | Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add TDLS channel-switch Rx flowArik Nemtsov2014-11-191-0/+45
| | | | | | | | | | When receiving a TDLS channel switch request or response, parse the frame and call a new tdls_recv_channel_switch op in the low level driver with the parsed data. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: introduce TDLS channel switch opsArik Nemtsov2014-11-191-0/+57
| | | | | | | | | | | | | | | | Implement the cfg80211 TDLS channel switch ops and introduce new mac80211 ones for low-level drivers. Verify low-level driver support for the new ops when using the relevant wiphy feature bit. Also verify the peer supports channel switching before passing the command down. Add a new STA flag to track the off-channel state with the TDLS peer and make sure to cancel the channel-switch if the peer STA is unexpectedly removed. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add device_timestamp to the drv_pre_channel_switch traceLuciano Coelho2014-11-101-0/+2
| | | | | | | | The device_timestamp value was left out of the event trace for drv_pre_channel_switch by mistake. Add it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: replace restart_complete() with reconfig_complete()Eliad Peller2014-11-041-3/+20
| | | | | | | | | | | | | | | Drivers might want to know also when mac80211 has completed reconfiguring after resume (e.g. in order to know when frames can be passed to mac80211). Rename restart_complete() to a more-generic reconfig_complete(), and add a new enum to indicate the reconfiguration type. Update the current users with the new prototype. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add support for driver tx power reportingFelix Fietkau2014-11-041-0/+27
| | | | | | | | | The configured tx power is often limited by hardware capabilities, channel settings, antenna configuration, etc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix tracing compilation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: allow channel switch with multiple channel contextsLuciano Coelho2014-10-091-3/+6
| | | | | | | | | Channel switch with multiple channel contexts should now work fine. Remove check that disallows switches when multiple contexts are in use. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add post_channel_switch driver operationLuciano Coelho2014-10-091-0/+6
| | | | | | | | | As a counterpart to the pre_channel_switch operation, add a post_channel_switch operation. This allows the drivers to go back to a normal configuration after the channel switch is completed. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add pre_channel_switch driver operationLuciano Coelho2014-10-091-0/+33
| | | | | | | | | | Some drivers may need to prepare for a channel switch also when it is initiated from the remote side (eg. station, P2P client). To make this possible, add a generic callback that can be called for all interface types. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add device_timestamp to the ieee80211_channel_switch structLuciano Coelho2014-10-091-0/+2
| | | | | | | | | | Some devices may need the device timestamp in order to synchronize the channel switch. To pass this value back to the driver, add it to the channel switch structure and copy the device_timestamp value received in the rx info structure into it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: extend set_coverage_class signatureLorenzo Bianconi2014-09-051-2/+2
| | | | | | | | | | Extend mac80211 set_coverage_class API in order to enable ACK timeout estimation algorithm (dynack) passing coverage class equals to -1 to lower drivers. Synchronize set_coverage_class routine signature with mac80211 function pointer for p54, ath9k, ath9k_htc and ath5k drivers. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: protect TDLS discovery sessionArik Nemtsov2014-06-231-0/+7
| | | | | | | | | | | After sending a TDLS discovery-request, we expect a reply to arrive on the AP's channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS setup-response is a direct packet not buffered by the AP. Add a new mac80211 driver callback to allow discovery session protection. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville2014-05-291-0/+85
|\
| * mac80211: add a single-transaction driver op to switch contextsLuciano Coelho2014-05-261-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases, when the driver is already using all the channel contexts it can handle at once, we have to do an in-place switch (ie. we cannot afford using an extra context temporarily for the transaction). But some drivers may not support switching the channel context assigned to a vif on the fly (ie. without unassigning and assigning it) while others may only work if the context is changed on the fly, without unassigning it first. To allow these different scenarios, add a new driver operation that let's the driver decide how to handle an in-place switch. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville2014-05-221-0/+32
|\|
| * mac80211: export the expected throughputAntonio Quartulli2014-05-211-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add get_expected_throughput() API to mac80211 so that each driver can implement its own version based on the RC algorithm they are using (might be using an HW RC algo). The API returns a value expressed in Kbps. Also, add the new get_expected_throughput() member to the rate_control_ops structure in order to be able to query the RC algorithm (this patch provides an implementation of this API for both minstrel and minstrel_ht). The related member in the station_info object is now filled accordingly when dumping a station. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: fix vif name tracingEliad Peller2014-05-091-2/+2
|/ | | | | | | | | | | | | | | | If sdata doesn't have a valid dev (e.g. in case of monitor vif), the vif_name field was initialized with (a length of) some short string, but later was set to a different, potentially larger one. This resulted in out-of-bounds write, which usually appeared as garbage in the trace log. Simply trace sdata->name, as it should always have the correct name for both cases. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add tracing for ieee80211_sta_set_bufferedJohannes Berg2014-01-061-0/+27
| | | | | | | | This is useful for debugging issues with drivers using this function (erroneously), so add tracing for the API call. Change-Id: Ice9d7eabb8fecbac188f0a741920d3488de700ec Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix checkpatch errorsWeilong Chen2013-12-181-1/+1
| | | | | | | Fix a number of different checkpatch errors. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add pre-RCU-sync sta removal driver operationJohannes Berg2013-12-161-19/+15Star
| | | | | | | | | | | | | | | | | | | | | | | Currently, mac80211 allows drivers to keep RCU-protected station references that are cleared when the station is removed from the driver and consequently needs to synchronize twice, once before removing the station from the driver (so it can guarantee that the station is no longer used in TX towards the driver) and once after the station is removed from the driver. Add a new pre-RCU-synchronisation station removal operation to the API to allow drivers to clear/invalidate their RCU-protected station pointers before the RCU synchronisation. This will allow removing the second synchronisation by changing the driver API so that the driver may no longer assume a valid RCU-protected pointer after sta_remove/sta_state returns. The alternative to this would be to synchronize_rcu() in all the drivers that currently rely on this behaviour (only iwlmvm) but that would defeat the purpose. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg2013-12-161-2/+2
|\
| * Merge branch 'for-john' of ↵John W. Linville2013-12-021-2/+19
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
| * \ Merge branch 'master' of ↵John W. Linville2013-10-171-0/+35
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
| * | | net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches2013-10-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Revert "mac80211: add driver callback for per-interface multicast filter"Johannes Berg2013-12-031-24/+0Star
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | This reverts commit 488b366a452934141959384c7a1b52b22d6154ef. The code isn't used by anyone, and the Intel driver isn't planning to use it either right now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | mac80211: add min required channel definition fieldEliad Peller2013-11-251-2/+19
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new field to ieee80211_chanctx_conf to indicate the min required channel configuration. Tuning to a narrower channel might help reducing the noise level and saving some power. The min required channel definition is the max of all min required channel definitions of the interfaces bound to this channel context. In AP mode, use 20MHz when there are no connected station. When a new station is added/removed, calculate the new max bandwidth supported by any of the stations (e.g. 80MHz when 80MHz and 40MHz stations are connected). In other cases, simply use bss_conf.chandef as the min required chandef. Notify drivers about changes to this field by calling drv_change_chanctx with a new CHANGE_MIN_WIDTH notification. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: add explicit IBSS driver operationsJohannes Berg2013-10-011-0/+35
|/ | | | | | | | | This can be useful for drivers if they have any failure cases when joining an IBSS. Also move setting the queue parameters to before this new call, in case the new driver op needs them already. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add channel switch command and beacon callbacksSimon Wunderlich2013-08-011-0/+26
| | | | | | | | | | | | | | | | The count field in CSA must be decremented with each beacon transmitted. This patch implements the functionality for drivers using ieee80211_beacon_get(). Other drivers must call back manually after reaching count == 0. This patch also contains the handling and finish worker for the channel switch command, and mac80211/chanctx code to allow to change a channel definition of an active channel context. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [small cleanups, catch identical chandef] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: support secondary channel offset in CSAJohannes Berg2013-04-161-4/+4
| | | | | | | | | | | | | | | Add support for the secondary channel offset IE in channel switch announcements. This is necessary for proper handling of CSA on HT access points. For this to work it is also necessary to convert everything here to use chandef structs instead of just channels. The driver updates aren't really correct though. In particular, the TI wl18xx driver update can't possibly be right since it just ignores the new channel width for lack of firmware API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan2013-03-251-20/+17Star
| | | | | | | | | | Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add P2P NoA settingsJanusz Dziedzic2013-03-221-4/+2Star
| | | | | | | | Add P2P NoA settings for STA mode. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [fix docs] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: pass queue bitmap to flush operationJohannes Berg2013-03-181-4/+7
| | | | | | | | | | There are a number of situations in which mac80211 only really needs to flush queues for one virtual interface, and in fact during this frames might be transmitted on other virtual interfaces. Calculate and pass a queue bitmap to the driver so it knows which queues to flush. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add driver callback for per-interface multicast filterAlexander Bondar2013-03-111-0/+24
| | | | | | | | | Some devices have multicast filter capability for each individual virtual interface rather than just a global one. Add an interface specific driver callback allowing such drivers to configure this. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Allow drivers to differentiate between ROC typesIlan Peer2013-03-061-4/+7
| | | | | | | | | | | Some devices can handle remain on channel requests differently based on the request type/priority. Add support to differentiate between different ROC types, i.e., indicate that the ROC is required for sending managment frames. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-16 04:44:34 +0200