summaryrefslogtreecommitdiffstats
path: root/net/tipc/addr.h
Commit message (Collapse)AuthorAgeFilesLines
* tipc: add 128-bit node identifierJon Maloy2018-03-231-5/+23
| | | | | | | | | | | | | | | | | | | We add a 128-bit node identity, as an alternative to the currently used 32-bit node address. For the sake of compatibility and to minimize message header changes we retain the existing 32-bit address field. When not set explicitly by the user, this field will be filled with a hash value generated from the much longer node identity, and be used as a shorthand value for the latter. We permit either the address or the identity to be set by configuration, but not both, so when the address value is set by a legacy user the corresponding 128-bit node identity is generated based on the that value. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove direct accesses to own_addr field in struct tipc_netJon Maloy2018-03-231-1/+1
| | | | | | | | | | | | As a preparation to changing the addressing structure of TIPC we replace all direct accesses to the tipc_net::own_addr field with the function dedicated for this, tipc_own_addr(). There are no changes to program logics in this commit. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: allow closest-first lookup algorithm when legacy address is configuredJon Maloy2018-03-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The removal of an internal structure of the node address has an unwanted side effect. - Currently, if a user is sending an anycast message with destination domain 0, the tipc_namebl_translate() function will use the 'closest- first' algorithm to first look for a node local destination, and only when no such is found, will it resort to the cluster global 'round- robin' lookup algorithm. - Current users can get around this, and enforce unconditional use of global round-robin by indicating a destination as Z.0.0 or Z.C.0. - This option disappears when we make the node address flat, since the lookup algorithm has no way of recognizing this case. So, as long as there are node local destinations, the algorithm will always select one of those, and there is nothing the sender can do to change this. We solve this by eliminating the 'closest-first' option, which was never a good idea anyway, for non-legacy users, but only for those. To distinguish between legacy users and non-legacy users we introduce a new flag 'legacy_addr_format' in struct tipc_core, to be set when the user configures a legacy-style Z.C.N node address. Hence, when a legacy user indicates a zero lookup domain 'closest-first' is selected, and in all other cases we use 'round-robin'. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove restrictions on node address valuesJon Maloy2018-03-231-11/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nominally, TIPC organizes network nodes into a three-level network hierarchy consisting of the levels 'zone', 'cluster' and 'node'. This hierarchy is reflected in the node address format, - it is sub-divided into an 8-bit zone id, and 12 bit cluster id, and a 12-bit node id. However, the 'zone' and 'cluster' levels have in reality never been fully implemented,and never will be. The result of this has been that the first 20 bits the node identity structure have been wasted, and the usable node identity range within a cluster has been limited to 12 bits. This is starting to become a problem. In the following commits, we will need to be able to connect between nodes which are using the whole 32-bit value space of the node address. We therefore remove the restrictions on which values can be assigned to node identity, -it is from now on only a 32-bit integer with no assumed internal structure. Isolation between clusters is now achieved only by setting different values for the 'network id' field used during neighbor discovery, in practice leading to the latter becoming the new cluster identity. The rules for accepting discovery requests/responses from neighboring nodes now become: - If the user is using legacy address format on both peers, reception of discovery messages is subject to the legacy lookup domain check in addition to the cluster id check. - Otherwise, the discovery request/response is always accepted, provided both peers have the same network id. This secures backwards compatibility for users who have been using zone or cluster identities as cluster separators, instead of the intended 'network id'. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: obsolete TIPC_ZONE_SCOPEJon Maloy2018-03-171-0/+10
| | | | | | | | | | | | | | | | | | | | | Publications for TIPC_CLUSTER_SCOPE and TIPC_ZONE_SCOPE are in all aspects handled the same way, both on the publishing node and on the receiving nodes. Despite previous ambitions to the contrary, this is never going to change, so we take the conseqeunce of this and obsolete TIPC_ZONE_SCOPE and related macros/functions. Whenever a user is doing a bind() or a sendmsg() attempt using ZONE_SCOPE we translate this internally to CLUSTER_SCOPE, while we remain compatible with users and remote nodes still using ZONE_SCOPE. Furthermore, the non-formalized scope value 0 has always been permitted for use during lookup, with the same meaning as ZONE_SCOPE/CLUSTER_SCOPE. We now permit it even as binding scope, but for compatibility reasons we choose to not change the value of TIPC_CLUSTER_SCOPE. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: introduce constants for tipc address validationParthasarathy Bhuvaragan2016-07-261-4/+1Star
| | | | | | | | | | In this commit, we introduce defines for tipc address size, offset and mask specification for Zone.Cluster.Node. There is no functional change in this commit. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: add neighbor monitoring frameworkJon Paul Maloy2016-06-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIPC based clusters are by default set up with full-mesh link connectivity between all nodes. Those links are expected to provide a short failure detection time, by default set to 1500 ms. Because of this, the background load for neighbor monitoring in an N-node cluster increases with a factor N on each node, while the overall monitoring traffic through the network infrastructure increases at a ~(N * (N - 1)) rate. Experience has shown that such clusters don't scale well beyond ~100 nodes unless we significantly increase failure discovery tolerance. This commit introduces a framework and an algorithm that drastically reduces this background load, while basically maintaining the original failure detection times across the whole cluster. Using this algorithm, background load will now grow at a rate of ~(2 * sqrt(N)) per node, and at ~(2 * N * sqrt(N)) in traffic overhead. As an example, each node will now have to actively monitor 38 neighbors in a 400-node cluster, instead of as before 399. This "Overlapping Ring Supervision Algorithm" is completely distributed and employs no centralized or coordinated state. It goes as follows: - Each node makes up a linearly ascending, circular list of all its N known neighbors, based on their TIPC node identity. This algorithm must be the same on all nodes. - The node then selects the next M = sqrt(N) - 1 nodes downstream from itself in the list, and chooses to actively monitor those. This is called its "local monitoring domain". - It creates a domain record describing the monitoring domain, and piggy-backs this in the data area of all neighbor monitoring messages (LINK_PROTOCOL/STATE) leaving that node. This means that all nodes in the cluster eventually (default within 400 ms) will learn about its monitoring domain. - Whenever a node discovers a change in its local domain, e.g., a node has been added or has gone down, it creates and sends out a new version of its node record to inform all neighbors about the change. - A node receiving a domain record from anybody outside its local domain matches this against its own list (which may not look the same), and chooses to not actively monitor those members of the received domain record that are also present in its own list. Instead, it relies on indications from the direct monitoring nodes if an indirectly monitored node has gone up or down. If a node is indicated lost, the receiving node temporarily activates its own direct monitoring towards that node in order to confirm, or not, that it is actually gone. - Since each node is actively monitoring sqrt(N) downstream neighbors, each node is also actively monitored by the same number of upstream neighbors. This means that all non-direct monitoring nodes normally will receive sqrt(N) indications that a node is gone. - A major drawback with ring monitoring is how it handles failures that cause massive network partitionings. If both a lost node and all its direct monitoring neighbors are inside the lost partition, the nodes in the remaining partition will never receive indications about the loss. To overcome this, each node also chooses to actively monitor some nodes outside its local domain. Those nodes are called remote domain "heads", and are selected in such a way that no node in the cluster will be more than two direct monitoring hops away. Because of this, each node, apart from monitoring the member of its local domain, will also typically monitor sqrt(N) remote head nodes. - As an optimization, local list status, domain status and domain records are marked with a generation number. This saves senders from unnecessarily conveying unaltered domain records, and receivers from performing unneeded re-adaptations of their node monitoring list, such as re-assigning domain heads. - As a measure of caution we have added the possibility to disable the new algorithm through configuration. We do this by keeping a threshold value for the cluster size; a cluster that grows beyond this value will switch from full-mesh to ring monitoring, and vice versa when it shrinks below the value. This means that if the threshold is set to a value larger than any anticipated cluster size (default size is 32) the new algorithm is effectively disabled. A patch set for altering the threshold value and for listing the table contents will follow shortly. - This change is fully backwards compatible. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: simplify include dependenciesJon Paul Maloy2015-05-141-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | When we try to add new inline functions in the code, we sometimes run into circular include dependencies. The main problem is that the file core.h, which really should be at the root of the dependency chain, instead is a leaf. I.e., core.h includes a number of header files that themselves should be allowed to include core.h. In reality this is unnecessary, because core.h does not need to know the full signature of any of the structs it refers to, only their type declaration. In this commit, we remove all dependencies from core.h towards any other tipc header file. As a consequence of this change, we can now move the function tipc_own_addr(net) from addr.c to addr.h, and make it inline. There are no functional changes in this commit. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix two bugs in secondary destination lookupJon Paul Maloy2015-03-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A message sent to a node after a successful name table lookup may still find that the destination socket has disappeared, because distribution of name table updates is non-atomic. If so, the message will be rejected back to the sender with error code TIPC_ERR_NO_PORT. If the source socket of the message has disappeared in the meantime, the message should be dropped. However, in the currrent code, the message will instead be subject to an unwanted tertiary lookup, because the function tipc_msg_lookup_dest() doesn't check if there is an error code present in the message before performing the lookup. In the worst case, the message may now find the old destination again, and be redirected once more, instead of being dropped directly as it should be. A second bug in this function is that the "prev_node" field in the message is not updated after successful lookup, something that may have unpredictable consequences. The problems arising from those bugs occur very infrequently. The third change in this function; the test on msg_reroute_msg_cnt() is purely cosmetic, reflecting that the returned value never can be negative. This commit corrects the two bugs described above. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make tipc node address support net namespaceYing Xue2015-01-121-38/+6Star
| | | | | | | | | | | | | | If net namespace is supported in tipc, each namespace will be treated as a separate tipc node. Therefore, every namespace must own its private tipc node address. This means the "tipc_own_addr" global variable of node address must be moved to tipc_net structure to satisfy the requirement. It's turned out that users also can assign node address for every namespace. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make tipc broadcast link support net namespaceYing Xue2015-01-121-0/+3
| | | | | | | | | | | | | | TIPC broadcast link is statically established and its relevant states are maintained with the global variables: "bcbearer", "bclink" and "bcl". Allowing different namespace to own different broadcast link instances, these variables must be moved to tipc_net structure and broadcast link instances would be allocated and initialized when namespace is created. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make tipc node table aware of net namespaceYing Xue2015-01-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: cleanup core.c and core.h filesYing Xue2015-01-121-2/+0Star
| | | | | | | | | | | Only the works of initializing and shutting down tipc module are done in core.h and core.c files, so all stuffs which are not closely associated with the two tasks should be moved to appropriate places. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: explicitly include core.h in addr.hAndreas Bofjäll2014-02-131-0/+2
| | | | | | | | | | | | The inline functions in addr.h uses tipc_own_addr which is exported by core.h, but addr.h never actually includes it. It works because it is explicitly included where this is used, but it looks a bit strange. Include core.h in addr.h explicitly to make the dependency clearer. Signed-off-by: Andreas Bofjäll <andreas.bofjall@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: compress out gratuitous extra carriage returnsPaul Gortmaker2012-04-301-3/+0Star
| | | | | | | | | | | | | | | Some of the comment blocks are floating in limbo between two functions, or between blocks of code. Delete the extra line feeds between any comment and its associated following block of code, to be consistent with the majority of the rest of the kernel. Also delete trailing newlines at EOF and fix a couple trivial typos in existing comments. This is a 100% cosmetic change with no runtime impact. We get rid of over 500 lines of non-code, and being blank line deletes, they won't even show up as noise in git blame. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Add routines for safe checking of node's network addressAllan Stephens2012-04-191-1/+19
| | | | | | | | | | | | | | | | | Introduces routines that test whether a given network address is equal to a node's own network address or if it lies within the node's own network cluster, and which work properly regardless of whether the node is using the default network address <0.0.0> or a non-zero network address that is assigned later on. In essence, these routines ensure that address <0.0.0> is treated as an alias for "this node", regardless of which network address the node is actually using. Old users of the pre-existing more strict match in_own_cluster() have been accordingly redirected to what is now called in_own_cluster_exact() --- which does not extend matching to <0,0,0>. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: make zone/cluster mask constants a definePaul Gortmaker2011-05-101-2/+5
| | | | | | | This allows them to be available for easy re-use in other places and avoids trivial mistakes caused by "count the f's and 0's". Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Add network address mask helper routinesAllan Stephens2011-03-131-4/+13
| | | | | | | | | | | | Introduces a pair of helper routines that convert the network address for a TIPC node into the network address for its cluster or zone. This is a cosmetic change designed to avoid future errors caused by the incorrect use of address bitmasks, and does not alter the existing operation of TIPC. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* tipc: Remove prototype code for supporting inter-cluster routingAllan Stephens2011-01-011-15/+0Star
| | | | | | | | | | | Eliminates routines and data structures that were intended to allow TIPC to route messages to other clusters. Currently, TIPC supports only networks consisting of a single cluster within a single zone, so this code is unnecessary. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: Remove prototype code for supporting slave nodesAllan Stephens2011-01-011-10/+0Star
| | | | | | | | | | | | | | | | | Simplifies routines and data structures that were intended to allow TIPC to support slave nodes (i.e. nodes that did not have links to all of the other nodes in its cluster, forcing TIPC to route messages that it could not deliver directly through a non-slave node). Currently, TIPC supports only networks containing non-slave nodes, so this code is unnecessary. Note: The latest edition of the TIPC 2.0 Specification has eliminated the concept of slave nodes entirely. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: Reduce footprint by un-inlining address routinesAllan Stephens2010-05-131-34/+3Star
| | | | | | | | | | Convert address-related inline routines that are more than one line into standard functions, thereby eliminating a significant amount of repeated code. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: add tipc_ prefix to fcns targeted for un-inliningAllan Stephens2010-05-131-4/+4
| | | | | | | | | | | | These functions have enough code in them such that they seem like sensible targets for un-inlining. Prior to doing that, this adds the tipc_ prefix to the functions, so that in the event of a panic dump or similar, the subsystem from which the functions come from is immediately clear. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TIPC]: Kill unused static inline (x5)Ilpo Järvinen2008-02-081-5/+0Star
| | | | | | | | | | | | | All these static inlines are unused: in_own_zone 1 (net/tipc/addr.h) msg_dataoctet 1 (net/tipc/msg.h) msg_direct 1 (include/net/tipc/tipc_msg.h) msg_options 1 (include/net/tipc/tipc_msg.h) tipc_nmap_get 1 (net/tipc/bcast.h) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] TIPC: Fix whitespace errors.YOSHIFUJI Hideaki2007-02-111-3/+3
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TIPC] Avoid polluting the global namespacePer Liden2006-01-181-2/+2
| | | | | | This patch adds a tipc_ prefix to all externally visible symbols. Signed-off-by: Per Liden <per.liden@ericsson.com>
* [TIPC] More updates of file headersPer Liden2006-01-121-1/+1
| | | | | | | | | Updated copyright notice to include the year the file was actually created. Information about file creation dates was extracted from the files in the old CVS repository at tipc.sourceforge.net. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
* [TIPC] Update of file headersPer Liden2006-01-121-2/+1Star
| | | | | | | The copyright statements from different parts of Ericsson have been merged into one. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
* [TIPC] License header updatePer Liden2006-01-121-19/+23
| | | | | | | | The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
* [TIPC] Initial mergePer Liden2006-01-121-0/+125
TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>