summaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAgeFilesLines
* NFS: Don't drop CB requests with invalid principalsChuck Lever2016-07-111-0/+5
| | | | | | | | | | | | | | Before commit 778be232a207 ("NFS do not find client in NFSv4 pg_authenticate"), the Linux callback server replied with RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB request. Let's restore that behavior so the server has a chance to do something useful about it, and provide a warning that helps admins correct the problem. Fixes: 778be232a207 ("NFS do not find client in NFSv4 ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* svc: Avoid garbage replies when pc_func() returns rpc_drop_replyChuck Lever2016-07-111-1/+2
| | | | | | | | | | | | If an RPC program does not set vs_dispatch and pc_func() returns rpc_drop_reply, the server sends a reply anyway containing a single word containing the value RPC_DROP_REPLY (in network byte-order, of course). This is a nonsense RPC message. Fixes: 9e701c610923 ("svcrpc: simpler request dropping") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: No direct data placement with krb5i and krb5pChuck Lever2016-07-114-2/+26
| | | | | | | | | | | | | | | | | | | | Direct data placement is not allowed when using flavors that guarantee integrity or privacy. When such security flavors are in effect, don't allow the use of Read and Write chunks for moving individual data items. All messages larger than the inline threshold are sent via Long Call or Long Reply. On my systems (CX-3 Pro on FDR), for small I/O operations, the use of Long messages adds only around 5 usecs of latency in each direction. Note that when integrity or encryption is used, the host CPU touches every byte in these messages. Even if it could be used, data movement offload doesn't buy much in this case. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Clean up fixup_copy_count accountingChuck Lever2016-07-111-13/+13
| | | | | | | | | | | | | | fixup_copy_count should count only the number of bytes copied to the page list. The head and tail are now always handled without a data copy. And the debugging at the end of rpcrdma_inline_fixup() is also no longer necessary, since copy_len will be non-zero when there is reply data in the tail (a normal and valid case). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Update only specific fields in private receive bufferChuck Lever2016-07-111-4/+9
| | | | | | | | | | | Now that rpcrdma_inline_fixup() updates only two fields in rq_rcv_buf, a full memcpy of that structure to rq_private_buf is unwarranted. Updating rq_private_buf fields only where needed also better documents what is going on. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Do not update {head, tail}.iov_len in rpcrdma_inline_fixup()Chuck Lever2016-07-111-28/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While trying NFSv4.0/RDMA with sec=krb5p, I noticed small NFS READ operations failed. After the client unwrapped the NFS READ reply message, the NFS READ XDR decoder was not able to decode the reply. The message was "Server cheating in reply", with the reported number of received payload bytes being zero. Applications reported a read(2) that returned -1/EIO. The problem is rpcrdma_inline_fixup() sets the tail.iov_len to zero when the incoming reply fits entirely in the head iovec. The zero tail.iov_len confused xdr_buf_trim(), which then mangled the actual reply data instead of simply removing the trailing GSS checksum. As near as I can tell, RPC transports are not supposed to update the head.iov_len, page_len, or tail.iov_len fields in the receive XDR buffer when handling an incoming RPC reply message. These fields contain the length of each component of the XDR buffer, and hence the maximum number of bytes of reply data that can be stored in each XDR buffer component. I've concluded this because: - This is how xdr_partial_copy_from_skb() appears to behave - rpcrdma_inline_fixup() already does not alter page_len - call_decode() compares rq_private_buf and rq_rcv_buf and WARNs if they are not exactly the same Unfortunately, as soon as I tried the simple fix to just remove the line that sets tail.iov_len to zero, I saw that the logic that appends the implicit Write chunk pad inline depends on inline_fixup setting tail.iov_len to zero. To address this, re-organize the tail iovec handling logic to use the same approach as with the head iovec: simply point tail.iov_base to the correct bytes in the receive buffer. While I remember all this, write down the conclusion in documenting comments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: rpcrdma_inline_fixup() overruns the receive page listChuck Lever2016-07-111-5/+11
| | | | | | | | | | When the remaining length of an incoming reply is longer than the XDR buf's page_len, switch over to the tail iovec instead of copying more than page_len bytes into the page list. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Chunk list encoders no longer share one rl_segments arrayChuck Lever2016-07-112-53/+44Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, all three chunk list encoders each use a portion of the one rl_segments array in rpcrdma_req. This is because the MWs for each chunk list were preserved in rl_segments so that ro_unmap could find and invalidate them after the RPC was complete. However, now that MWs are placed on a per-req linked list as they are registered, there is no longer any information in rpcrdma_mr_seg that is shared between ro_map and ro_unmap_{sync,safe}, and thus nothing in rl_segments needs to be preserved after rpcrdma_marshal_req is complete. Thus the rl_segments array can be used now just for the needs of each rpcrdma_convert_iovs call. Once each chunk list is encoded, the next chunk list encoder is free to re-use all of rl_segments. This means all three chunk lists in one RPC request can now each encode a full size data payload with no increase in the size of rl_segments. This is a key requirement for Kerberos support, since both the Call and Reply for a single RPC transaction are conveyed via Long messages (RDMA Read/Write). Both can be large. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Place registered MWs on a per-req listChuck Lever2016-07-116-139/+94Star
| | | | | | | | | | | | | | | | | | | Instead of placing registered MWs sparsely into the rl_segments array, place these MWs on a per-req list. ro_unmap_{sync,safe} can then simply pull those MWs off the list instead of walking through the array. This change significantly reduces the size of struct rpcrdma_req by removing nsegs and rl_mw from every array element. As an additional clean-up, chunk co-ordinates are returned in the "*mw" output argument so they are no longer needed in every array element. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Release orphaned MRs immediatelyChuck Lever2016-07-112-12/+26
| | | | | | | | | | Instead of leaving orphaned MRs to be released when the transport is destroyed, release them immediately. The MR free list can now be replenished if it becomes exhausted. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Allocate MRs on demandChuck Lever2016-07-115-124/+114Star
| | | | | | | | | | | | | | | | | | | | | | | | | Frequent MR list exhaustion can impact I/O throughput, so enough MRs are always created during transport set-up to prevent running out. This means more MRs are created than most workloads need. Commit 94f58c58c0b4 ("xprtrdma: Allow Read list and Reply chunk simultaneously") introduced support for sending two chunk lists per RPC, which consumes more MRs per RPC. Instead of trying to provision more MRs, introduce a mechanism for allocating MRs on demand. A few MRs are allocated during transport set-up to kick things off. This significantly reduces the average number of MRs per transport while allowing the MR count to grow for workloads or devices that need more MRs. FRWR with mlx4 allocated almost 400 MRs per transport before this patch. Now it starts with 32. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Chunk list encoders must not return zeroChuck Lever2016-07-113-3/+7
| | | | | | | | | | Clean up, based on code audit: Remove the possibility that the chunk list XDR encoders can return zero, which would be interpreted as a NULL. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Honor ->send_request API contractChuck Lever2016-07-115-24/+39
| | | | | | | | | | | | | | | | | | | | | Commit c93c62231cf5 ("xprtrdma: Disconnect on registration failure") added a disconnect for some RPC marshaling failures. This is needed only in a handful of cases, but it was triggering for simple stuff like temporary resource shortages. Try to straighten this out. Fix up the lower layers so they don't return -ENOMEM or other error codes that the RPC client's FSM doesn't explicitly recognize. Also fix up the places in the send_request path that do want a disconnect. For example, when ib_post_send or ib_post_recv fail, this is a sign that there is a send or receive queue resource miscalculation. That should be rare, and is a sign of a software bug. But xprtrdma can recover: disconnect to reset the transport and start over. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Reply buffer exhaustion can be catastrophicChuck Lever2016-07-111-7/+5Star
| | | | | | | | | | | | | | | Not having an rpcrdma_rep at call_allocate time can be a problem. It means that send_request can't post a receive buffer to catch the RPC's reply. Possible consequences are RPC timeouts or even transport deadlock. Instead of allowing an RPC to proceed if an rpcrdma_rep is not available, return NULL to force call_allocate to wait and try again. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Clean up device capability detectionChuck Lever2016-07-114-29/+44
| | | | | | | | | Clean up: Move device capability detection into memreg-specific source files. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Remove rpcrdma_map_one() and friendsChuck Lever2016-07-112-44/+0Star
| | | | | | | | | | | | | Clean up: ALLPHYSICAL is gone and FMR has been converted to use scatterlists. There are no more users of these functions. This patch shrinks the size of struct rpcrdma_req by about 3500 bytes on x86_64. There is one of these structs for each RPC credit (128 credits per transport connection). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Remove ALLPHYSICAL memory registration modeChuck Lever2016-07-114-142/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | No HCA or RNIC in the kernel tree requires the use of ALLPHYSICAL. ALLPHYSICAL advertises in the clear on the network fabric an R_key that is good for all of the client's memory. No known exploit exists, but theoretically any user on the server can use that R_key on the client's QP to read or update any part of the client's memory. ALLPHYSICAL exposes the client to server bugs, including: o base/bounds errors causing data outside the i/o buffer to be accessed o RDMA access after reply causing data corruption and/or integrity fail ALLPHYSICAL can't protect application memory regions from server update after a local signal or soft timeout has terminated an RPC. ALLPHYSICAL chunks are no larger than a page. Special cases to handle small chunks and long chunk lists have been a source of implementation complexity and bugs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Do not leak an MW during a DMA map failureChuck Lever2016-07-112-0/+2
| | | | | | | | Based on code audit. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Refactor MR recovery work queuesChuck Lever2016-07-115-166/+135Star
| | | | | | | | | | | | | | | | I found that commit ead3f26e359e ("xprtrdma: Add ro_unmap_safe memreg method"), which introduces ro_unmap_safe, never wired up the FMR recovery worker. The FMR and FRWR recovery work queues both do the same thing. Instead of setting up separate individual work queues for this, schedule a delayed worker to deal with them, since recovering MRs is not performance-critical. Fixes: ead3f26e359e ("xprtrdma: Add ro_unmap_safe memreg method") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Use scatterlist for DMA mapping and unmapping under FMRChuck Lever2016-07-111-39/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The use of a scatterlist for handling DMA mapping and unmapping was recently introduced in frwr_ops.c in commit 4143f34e01e9 ("xprtrdma: Port to new memory registration API"). That commit did not make a similar update to xprtrdma's FMR support because the core ib_map_phys_fmr() and ib_unmap_fmr() APIs have not been changed to take a scatterlist argument. However, FMR still needs to do DMA mapping and unmapping. It appears that RDS, for example, uses a scatterlist for this, then builds the DMA addr array for the ib_map_phys_fmr call separately. I see that SRP also utilizes a scatterlist for DMA mapping. xprtrdma can do something similar. This modernization is used immediately to properly defer DMA unmapping during fmr_unmap_safe (a FIXME). It separates the DMA unmapping coordinates from the rl_segments array. This array, being part of an rpcrdma_req, is always re-used immediately when an RPC exits. A scatterlist is allocated in memory independent of the rl_segments array, so it can be preserved indefinitely (ie, until the MR invalidation and DMA unmapping can actually be done by a worker thread). The FRWR and FMR DMA mapping code are slightly different from each other now, and will diverge further when the "Check for holes" logic can be removed from FRWR (support for SG_GAP MRs). So I chose not to create helpers for the common-looking code. Fixes: ead3f26e359e ("xprtrdma: Add ro_unmap_safe memreg method") Suggested-by: Sagi Grimberg <sagi@lightbits.io> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Rename fields in rpcrdma_fmrChuck Lever2016-07-112-19/+19
| | | | | | | | | Clean up: Use the same naming convention used in other RPC/RDMA-related data structures. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Move init and release helpersChuck Lever2016-07-112-89/+119
| | | | | | | | | Clean up: Moving these helpers in a separate patch makes later patches more readable. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Create common scatterlist fields in rpcrdma_mwChuck Lever2016-07-112-47/+46Star
| | | | | | | | | | | | | | Clean up: FMR is about to replace the rpcrdma_map_one code with scatterlists. Move the scatterlist fields out of the FRWR-specific union and into the generic part of rpcrdma_mw. One minor change: -EIO is now returned if FRWR registration fails. The RPC is terminated immediately, since the problem is likely due to a software bug, thus retrying likely won't help. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* xprtrdma: Remove FMRs from the unmap list after unmappingChuck Lever2016-07-111-2/+7
| | | | | | | | | | | | | | | | | | | | | | ib_unmap_fmr() takes a list of FMRs to unmap. However, it does not remove the FMRs from this list as it processes them. Other ib_unmap_fmr() call sites are careful to remove FMRs from the list after ib_unmap_fmr() returns. Since commit 7c7a5390dc6c8 ("xprtrdma: Add ro_unmap_sync method for FMR") fmr_op_unmap_sync passes more than one FMR to ib_unmap_fmr(), but it didn't bother to remove the FMRs from that list once the call was complete. I've noticed some instability that could be related to list tangling by the new fmr_op_unmap_sync() logic. In an abundance of caution, add some defensive logic to clean up properly after ib_unmap_fmr(). Fixes: 7c7a5390dc6c8 ("xprtrdma: Add ro_unmap_sync method for FMR") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* ipv6: Fix mem leak in rt6i_pcpuMartin KaFai Lau2016-07-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | It was first reported and reproduced by Petr (thanks!) in https://bugzilla.kernel.org/show_bug.cgi?id=119581 free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy(). However, after fixing a deadlock bug in commit 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt"), free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL. It is worth to note that rt6i_pcpu is protected by table->tb6_lock. kmemleak somehow did not report it. We nailed it down by observing the pcpu entries in /proc/vmallocinfo (first suggested by Hannes, thanks!). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Fixes: 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt") Reported-by: Petr Novopashenniy <pety@rusnet.ru> Tested-by: Petr Novopashenniy <pety@rusnet.ru> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Petr Novopashenniy <pety@rusnet.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix decnet rtnexthop parsingVegard Nossum2016-07-051-9/+12
| | | | | | | | | | | | | | | dn_fib_count_nhs() could enter an infinite loop if nhp->rtnh_len == 0 (i.e. if userspace passes a malformed netlink message). Let's use the helpers from net/nexthop.h which take care of all this stuff. We can do exactly the same as e.g. fib_count_nexthops() and fib_get_nhs() from net/ipv4/fib_semantics.c. This fixes the softlockup for me. Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* RDS: fix rds_tcp_init() error pathVegard Nossum2016-07-051-2/+3
| | | | | | | | | | | | | | If register_pernet_subsys() fails, we shouldn't try to call unregister_pernet_subsys(). Fixes: 467fa15356 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Cc: stable@vger.kernel.org Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix nl compat regression for link statisticsRichard Alpe2016-07-011-1/+1
| | | | | | | | | | | | | | | | | | | | | Fix incorrect use of nla_strlcpy() where the first NLA_HDRLEN bytes of the link name where left out. Making the output of tipc-config -ls look something like: Link statistics: dcast-link 1:data0-1.1.2:data0 1:data0-1.1.3:data0 Also, for the record, the patch that introduce this regression claims "Sending the whole object out can cause a leak". Which isn't very likely as this is a compat layer, where the data we are parsing is generated by us and we know the string to be NULL terminated. But you can of course never be to secure. Fixes: 5d2be1422e02 (tipc: fix an infoleak in tipc_nl_compat_link_dump) Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: fix mirrored packets checksumWANG Cong2016-07-012-19/+1Star
| | | | | | | | | | | | Similar to commit 9b368814b336 ("net: fix bridge multicast packet checksum validation") we need to fixup the checksum for CHECKSUM_COMPLETE when pushing skb on RX path. Otherwise we get similar splats. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* packet: Use symmetric hash for PACKET_FANOUT_HASH.David S. Miller2016-07-012-1/+44
| | | | | | | | | | | | | | | | | | | | | | People who use PACKET_FANOUT_HASH want a symmetric hash, meaning that they want packets going in both directions on a flow to hash to the same bucket. The core kernel SKB hash became non-symmetric when the ipv6 flow label and other entities were incorporated into the standard flow hash order to increase entropy. But there are no users of PACKET_FANOUT_HASH who want an assymetric hash, they all want a symmetric one. Therefore, use the flow dissector to compute a flat symmetric hash over only the protocol, addresses and ports. This hash does not get installed into and override the normal skb hash, so this change has no effect whatsoever on the rest of the stack. Reported-by: Eric Leblond <eric@regit.org> Tested-by: Eric Leblond <eric@regit.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Fix ip_skb_dst_mtu to use the sk passed by ip_finish_outputShmulik Ladkani2016-06-302-3/+3
| | | | | | | | | | | | | | | | | | | | | ip_skb_dst_mtu uses skb->sk, assuming it is an AF_INET socket (e.g. it calls ip_sk_use_pmtu which casts sk as an inet_sk). However, in the case of UDP tunneling, the skb->sk is not necessarily an inet socket (could be AF_PACKET socket, or AF_UNSPEC if arriving from tun/tap). OTOH, the sk passed as an argument throughout IP stack's output path is the one which is of PMTU interest: - In case of local sockets, sk is same as skb->sk; - In case of a udp tunnel, sk is the tunneling socket. Fix, by passing ip_finish_output's sk to ip_skb_dst_mtu. This augments 7026b1ddb6 'netfilter: Pass socket pointer down through okfn().' Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2016-06-2961-345/+433
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "I've been traveling so this accumulates more than week or so of bug fixing. It perhaps looks a little worse than it really is. 1) Fix deadlock in ath10k driver, from Ben Greear. 2) Increase scan timeout in iwlwifi, from Luca Coelho. 3) Unbreak STP by properly reinjecting STP packets back into the stack. Regression fix from Ido Schimmel. 4) Mediatek driver fixes (missing malloc failure checks, leaking of scratch memory, wrong indexing when mapping TX buffers, etc.) from John Crispin. 5) Fix endianness bug in icmpv6_err() handler, from Hannes Frederic Sowa. 6) Fix hashing of flows in UDP in the ruseport case, from Xuemin Su. 7) Fix netlink notifications in ovs for tunnels, delete link messages are never emitted because of how the device registry state is handled. From Nicolas Dichtel. 8) Conntrack module leaks kmemcache on unload, from Florian Westphal. 9) Prevent endless jump loops in nft rules, from Liping Zhang and Pablo Neira Ayuso. 10) Not early enough spinlock initialization in mlx4, from Eric Dumazet. 11) Bind refcount leak in act_ipt, from Cong WANG. 12) Missing RCU locking in HTB scheduler, from Florian Westphal. 13) Several small MACSEC bug fixes from Sabrina Dubroca (missing RCU barrier, using heap for SG and IV, and erroneous use of async flag when allocating AEAD conext.) 14) RCU handling fix in TIPC, from Ying Xue. 15) Pass correct protocol down into ipv4_{update_pmtu,redirect}() in SIT driver, from Simon Horman. 16) Socket timer deadlock fix in TIPC from Jon Paul Maloy. 17) Fix potential deadlock in team enslave, from Ido Schimmel. 18) Memory leak in KCM procfs handling, from Jiri Slaby. 19) ESN generation fix in ipv4 ESP, from Herbert Xu. 20) Fix GFP_KERNEL allocations with locks held in act_ife, from Cong WANG. 21) Use after free in netem, from Eric Dumazet. 22) Uninitialized last assert time in multicast router code, from Tom Goff. 23) Skip raw sockets in sock_diag destruction broadcast, from Willem de Bruijn. 24) Fix link status reporting in thunderx, from Sunil Goutham. 25) Limit resegmentation of retransmit queue so that we do not retransmit too large GSO frames. From Eric Dumazet. 26) Delay bpf program release after grace period, from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (141 commits) openvswitch: fix conntrack netlink event delivery qed: Protect the doorbell BAR with the write barriers. neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit() e1000e: keep VLAN interfaces functional after rxvlan off cfg80211: fix proto in ieee80211_data_to_8023 for frames without LLC header qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag() bpf, perf: delay release of BPF prog after grace period net: bridge: fix vlan stats continue counter tcp: do not send too big packets at retransmit time ibmvnic: fix to use list_for_each_safe() when delete items net: thunderx: Fix TL4 configuration for secondary Qsets net: thunderx: Fix link status reporting net/mlx5e: Reorganize ethtool statistics net/mlx5e: Fix number of PFC counters reported to ethtool net/mlx5e: Prevent adding the same vxlan port net/mlx5e: Check for BlueFlame capability before allocating SQ uar net/mlx5e: Change enum to better reflect usage net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devices net/mlx5: Update command strings net: marvell: Add separate config ANEG function for Marvell 88E1111 ...
| * Merge tag 'mac80211-for-davem-2016-06-29-v2' of ↵David S. Miller2016-06-292-3/+6
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two small fixes * fix mesh peer link counter, decrement wasn't always done at all * fix ethertype (length) for packets without RFC 1042 or bridge tunnel header ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * cfg80211: fix proto in ieee80211_data_to_8023 for frames without LLC headerFelix Fietkau2016-06-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PDU length of incoming LLC frames is set to the total skb payload size in __ieee80211_data_to_8023() of net/wireless/util.c which incorrectly includes the length of the IEEE 802.11 header. The resulting LLC frame header has a too large PDU length, causing the llc_fixup_skb() function of net/llc/llc_input.c to reject the incoming skb, effectively breaking STP. Solve the problem by properly substracting the IEEE 802.11 frame header size from the PDU length, allowing the LLC processor to pick up the incoming control messages. Special thanks to Gerry Rozema for tracking down the regression and proposing a suitable patch. Fixes: 2d1c304cb2d5 ("cfg80211: add function for 802.3 conversion with separate output buffer") Cc: stable@vger.kernel.org Reported-by: Gerry Rozema <gerryr@rozeware.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
| | * mac80211: Fix mesh estab_plinks counting in STA removal caseJouni Malinen2016-06-281-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a user space program (e.g., wpa_supplicant) deletes a STA entry that is currently in NL80211_PLINK_ESTAB state, the number of established plinks counter was not decremented and this could result in rejecting new plink establishment before really hitting the real maximum plink limit. For !user_mpm case, this decrementation is handled by mesh_plink_deactive(). Fix this by decrementing estab_plinks on STA deletion (mesh_sta_cleanup() gets called from there) so that the counter has a correct value and the Beacon frame advertisement in Mesh Configuration element shows the proper value for capability to accept additional peers. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
| * | openvswitch: fix conntrack netlink event deliverySamuel Gauthier2016-06-291-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only the first and last netlink message for a particular conntrack are actually sent. The first message is sent through nf_conntrack_confirm when the conntrack is committed. The last one is sent when the conntrack is destroyed on timeout. The other conntrack state change messages are not advertised. When the conntrack subsystem is used from netfilter, nf_conntrack_confirm is called for each packet, from the postrouting hook, which in turn calls nf_ct_deliver_cached_events to send the state change netlink messages. This commit fixes the problem by calling nf_ct_deliver_cached_events in the non-commit case as well. Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") CC: Joe Stringer <joestringer@nicira.com> CC: Justin Pettit <jpettit@nicira.com> CC: Andy Zhou <azhou@nicira.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit()David Barroso2016-06-291-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | neigh_xmit() expects to be called inside an RCU-bh read side critical section, and while one of its two current callers gets this right, the other one doesn't. More specifically, neigh_xmit() has two callers, mpls_forward() and mpls_output(), and while both callers call neigh_xmit() under rcu_read_lock(), this provides sufficient protection for neigh_xmit() only in the case of mpls_forward(), as that is always called from softirq context and therefore doesn't need explicit BH protection, while mpls_output() can be called from process context with softirqs enabled. When mpls_output() is called from process context, with softirqs enabled, we can be preempted by a softirq at any time, and RCU-bh considers the completion of a softirq as signaling the end of any pending read-side critical sections, so if we do get a softirq while we are in the part of neigh_xmit() that expects to be run inside an RCU-bh read side critical section, we can end up with an unexpected RCU grace period running right in the middle of that critical section, making things go boom. This patch fixes this impedance mismatch in the callee, by making neigh_xmit() always take rcu_read_{,un}lock_bh() around the code that expects to be treated as an RCU-bh read side critical section, as this seems a safer option than fixing it in the callers. Fixes: 4fd3d7d9e868f ("neigh: Add helper function neigh_xmit") Signed-off-by: David Barroso <dbarroso@fastly.com> Signed-off-by: Lennert Buytenhek <lbuytenhek@fastly.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: bridge: fix vlan stats continue counterNikolay Aleksandrov2016-06-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I made a dumb off-by-one mistake when I added the vlan stats counter dumping code. The increment should happen before the check, not after otherwise we miss one entry when we continue dumping. Fixes: a60c090361ea ("bridge: netlink: export per-vlan stats") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tcp: do not send too big packets at retransmit timeEric Dumazet2016-06-291-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Arjun reported a bug in TCP stack and bisected it to a recent commit. In case where we process SACK, we can coalesce multiple skbs into fat ones (tcp_shift_skb_data()), to lower write queue overhead, because we do not expect to retransmit these packets. However, SACK reneging can happen, forcing the sender to retransmit all these packets. If skb->len is above 64KB, we then send buggy IP packets that could hang TSO engine on cxgb4. Neal suggested to use tcp_tso_autosize() instead of tp->gso_segs so that we cook packets of optimal size vs TCP/pacing. Thanks to Arjun for reporting the bug and running the tests ! Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Arjun V <arjun@chelsio.com> Tested-by: Arjun V <arjun@chelsio.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | batman-adv: Clean up untagged vlan when destroying via rtnl-linkSven Eckelmann2016-06-291-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The untagged vlan object is only destroyed when the interface is removed via the legacy sysfs interface. But it also has to be destroyed when the standard rtnl-link interface is used. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | batman-adv: Fix ICMP RR ethernet access after skb_linearizeSven Eckelmann2016-06-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The skb_linearize may reallocate the skb. This makes the calculated pointer for ethhdr invalid. But it the pointer is used later to fill in the RR field of the batadv_icmp_packet_rr packet. Instead re-evaluate eth_hdr after the skb_linearize+skb_cow to fix the pointer and avoid the invalid read. Fixes: da6b8c20a5b8 ("batman-adv: generalize batman-adv icmp packet handling") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | batman-adv: Fix double-put of vlan objectBen Hutchings2016-06-291-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each batadv_tt_local_entry hold a single reference to a batadv_softif_vlan. In case a new entry cannot be added to the hash table, the error path puts the reference, but the reference will also now be dropped by batadv_tt_local_entry_release(). Fixes: a33d970d0b54 ("batman-adv: Fix reference counting of vlan object for tt_local_entry") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | batman-adv: Fix use-after-free/double-free of tt_req_nodeSven Eckelmann2016-06-292-6/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tt_req_node is added and removed from a list inside a spinlock. But the locking is sometimes removed even when the object is still referenced and will be used later via this reference. For example batadv_send_tt_request can create a new tt_req_node (including add to a list) and later re-acquires the lock to remove it from the list and to free it. But at this time another context could have already removed this tt_req_node from the list and freed it. CPU#0 batadv_batman_skb_recv from net_device 0 -> batadv_iv_ogm_receive -> batadv_iv_ogm_process -> batadv_iv_ogm_process_per_outif -> batadv_tvlv_ogm_receive -> batadv_tvlv_ogm_receive -> batadv_tvlv_containers_process -> batadv_tvlv_call_handler -> batadv_tt_tvlv_ogm_handler_v1 -> batadv_tt_update_orig -> batadv_send_tt_request -> batadv_tt_req_node_new spin_lock(...) allocates new tt_req_node and adds it to list spin_unlock(...) return tt_req_node CPU#1 batadv_batman_skb_recv from net_device 1 -> batadv_recv_unicast_tvlv -> batadv_tvlv_containers_process -> batadv_tvlv_call_handler -> batadv_tt_tvlv_unicast_handler_v1 -> batadv_handle_tt_response spin_lock(...) tt_req_node gets removed from list and is freed spin_unlock(...) CPU#0 <- returned to batadv_send_tt_request spin_lock(...) tt_req_node gets removed from list and is freed MEMORY CORRUPTION/SEGFAULT/... spin_unlock(...) This can only be solved via reference counting to allow multiple contexts to handle the list manipulation while making sure that only the last context holding a reference will free the object. Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann <sven@narfation.org> Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net> Tested-by: Amadeus Alfa <amadeus@chemnitz.freifunk.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | batman-adv: replace WARN with rate limited output on non-existing VLANSimon Wunderlich2016-06-291-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a VLAN tagged frame is received and the corresponding VLAN is not configured on the soft interface, it will splat a WARN on every packet received. This is a quite annoying behaviour for some scenarios, e.g. if bat0 is bridged with eth0, and there are arbitrary VLAN tagged frames from Ethernet coming in without having any VLAN configuration on bat0. The code should probably create vlan objects on the fly and transparently transport these VLAN-tagged Ethernet frames, but until this is done, at least the WARN splat should be replaced by a rate limited output. Fixes: 354136bcc3c4 ("batman-adv: fix kernel crash due to missing NULL checks") Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Bridge: Fix ipv6 mc snooping if bridge has no ipv6 addressdaniel2016-06-282-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bridge is falsly dropping ipv6 mulitcast packets if there is: 1. No ipv6 address assigned on the brigde. 2. No external mld querier present. 3. The internal querier enabled. When the bridge fails to build mld queries, because it has no ipv6 address, it slilently returns, but keeps the local querier enabled. This specific case causes confusing packet loss. Ipv6 multicast snooping can only work if: a) An external querier is present OR b) The bridge has an ipv6 address an is capable of sending own queries Otherwise it has to forward/flood the ipv6 multicast traffic, because snooping cannot work. This patch fixes the issue by adding a flag to the bridge struct that indicates that there is currently no ipv6 address assinged to the bridge and returns a false state for the local querier in __br_multicast_querier_exists(). Special thanks to Linus Lüssing. Fixes: d1d81d4c3dd8 ("bridge: check return value of ipv6_dev_get_saddr()") Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipmr/ip6mr: Initialize the last assert time of mfc entries.Tom Goff2016-06-282-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | This fixes wrong-interface signaling on 32-bit platforms for entries created when jiffies > 2^31 + MFC_ASSERT_THRESH. Signed-off-by: Tom Goff <thomas.goff@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | vsock: make listener child lock ordering explicitStefan Hajnoczi2016-06-271-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several places where the listener and pending or accept queue child sockets are accessed at the same time. Lockdep is unhappy that two locks from the same class are held. Tell lockdep that it is safe and document the lock ordering. Originally Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> sent a similar patch asking whether this is safe. I have audited the code and also covered the vsock_pending_work() function. Suggested-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: enforce egress device match in per table nexthop lookupsPaolo Abeni2016-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with the commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups"), net hop lookup is first performed on route creation in the passed-in table. However device match is not enforced in table lookup, so the found route can be later discarded due to egress device mismatch and no global lookup will be performed. This cause the following to fail: ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dummy1 up ip link set dummy2 up ip route add 2001:db8:8086::/48 dev dummy1 metric 20 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy1 metric 20 ip route add 2001:db8:8086::/48 dev dummy2 metric 21 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy2 metric 21 RTNETLINK answers: No route to host This change fixes the issue enforcing device lookup in ip6_nh_lookup_table() v1->v2: updated commit message title Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Reported-and-tested-by: Beniamino Galvani <bgalvani@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | netem: fix a use after freeEric Dumazet2016-06-231-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the packet was dropped by lower qdisc, then we must not access it later. Save qdisc_pkt_len(skb) in a temp variable. Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | act_ife: acquire ife_mod_lock before reading ifeoplistWANG Cong2016-06-231-6/+8
| | | | | | | | | | | | | | | | | | | | | Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-23 01:32:03 +0200