summaryrefslogtreecommitdiffstats
path: root/sound/firewire
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: dice: add support for Solid State Logic Duende Classic/MiniTakashi Sakamoto2019-01-281-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Duende Classic was produced by Solid State Logic in 2006, as a first model of Duende DSP series. The following model, Duende Mini was produced in 2008. They are designed to receive isochronous packets for PCM frames via IEEE 1394 bus, perform signal processing by downloaded program, then transfer isochronous packets for converted PCM frames. These two models includes the same embedded board, consists of several ICs below: - Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus - WaveFront semiconductor, DICE II STD ASIC for link/protocol layer - Altera MAX 3000A CPLD for programs - Analog devices, SHARC ADSP-21363 for signal processing (4 chips) This commit adds support for the two models to ALSA dice driver. Like support for the other devices, packet streaming is just available. Userspace applications should be developed if full features became available; e.g. program uploader and parameter controller. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 349771402425, 'cmc': True, 'cyc_clk_acc': 255, 'generation': 1, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 20674, 'pmc': False}, 'root-directory': [ ['VENDOR', 20674], ['DESCRIPTOR', 'Solid State Logic'], ['MODEL', 112], ['DESCRIPTOR', 'Duende board'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': True}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 20674], ['VERSION', 1], ['MODEL', 112], ['DESCRIPTOR', 'Duende board']]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: Off by one in latter_handle_midi_msg()Dan Carpenter2019-01-251-1/+1
| | | | | | | | | | The > should be >= or otherwise we potentially read one element beyond the end of the ff->tx_midi_substreams[] array. Fixes: 73f5537fb209 ("ALSA: fireface: support tx MIDI functionality of Fireface UCX") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: comment cleanup about destination address of async ↵Takashi Sakamoto2019-01-243-29/+48
| | | | | | | | | | | | | | | | | | | | | | | | | transactions for MIDI messages In Fireface series, registration of higher 4 bytes of destination address for asynchronous transaction of MIDI messages is done by a write transaction to model-specific register. On the other hand, registration of lower 4 bytes of the address is selectable from 4 options. A register for this registration includes the other purpose options such as input attenuation. Thus this driver expects userspace applications to configure the register. Actual behaviour for the asynchronous transaction is different depending on protocols. In former protocol, destination offset of each transaction is the same as the registered address even if it is block request. In latter models, destination offset of each transaction is the offset of previous transaction plus 4 byte and the transaction is quadlet request. This commit cleanups comments about the above mechanism. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: support rx MIDI functionality for Fireface UCXTakashi Sakamoto2019-01-224-2/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In latter model of Fireface series, asynchronous transaction includes a prefix byte to indicate the way to decode included MIDI bytes. Upper 4 bits of the prefix byte indicates port number, and the rest 4 bits indicate the way to decode rest of bytes for MIDI messages. Basically the rest bits indicates the number of bytes for MIDI message. However, if the last byte of each MIDi message is included, the rest bits are 0xf. For example: message: f0 00 00 66 14 20 00 00 f7 offset: content (big endian, port 0) '0030: 0x02f00000 '0030: 0x03006614 '0030: 0x03200000 '0030: 0x0ff70000 This commit supports encoding scheme for the above and allows applications to transfer MIDI messages via ALSA rawmidi interface. An unused member (running_status) is reused to keep state of transmission of system exclusive messages. For your information, this is a dump of config rom. $ sudo ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'bmc': False, 'chip_ID': 13225063715, 'cmc': False, 'cyc_clk_acc': 0, 'imc': False, 'isc': True, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 2613}, 'root-directory': [ [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 2613], ['DESCRIPTOR', 'RME!'], ['EUI_64', 2873037108442403], [ 'UNIT', [ ['SPECIFIER_ID', 2613], ['VERSION', 4], ['MODEL', 1054720], ['DESCRIPTOR', 'Fireface UCX']]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add protocol-specific operation to fill transaction buffer ↵Takashi Sakamoto2019-01-223-19/+38
| | | | | | | | | | | | | with MIDI messages Between former and latter models, content of asynchronous transaction for MIDI messages from driver to device is different. This commit is a preparation to support latter models. A protocol-specific operation is added to encode MIDI messages to the transaction. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add model-dependent parameter for address to receive async ↵Takashi Sakamoto2019-01-223-5/+6
| | | | | | | | | | | | transaction for MIDI messages Between former and latter models, destination address to receive asynchronous transactions for MIDI messages is different. This commit adds model-dependent parameter for the addresses. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: support tx MIDI functionality of Fireface UCXTakashi Sakamoto2019-01-222-14/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fireface UCX transfers asynchronous transactions for MIDI messages. One transaction includes quadlet data therefore it can transfer 3 message bytes as maximum. Base address of the destination is configured by two settings; a register for higher 8 byte of the address, and a bitflag to option register indicates lower 8byte. The register for higher address is 0x'ffff'0000'0034. Unfortunately, firmware v24 includes a bug to ignore registered value for the destination address and transfers to 0x0001xxxxxxxx always. This driver doesn't work well if the bug exists, therefore users should install the latest firmware (v27). The bitflag is a part of value to be written to option register (0x'ffff'0000'0014). lower addr: bitflag (little endian) '0000'0000: 0x00002000 '0000'0080: 0x00004000 '0000'0100: 0x00008000 '0000'0180: 0x00010000 This register includes more options but they are not relevant to packet streaming or MIDI functionality. This driver don't touch it. Furthermore, the transaction is sent to address offset incremented by 4 byte to the offset in previous time. When it reaches base address plus 0x7c, next offset is the base address. Content of the transaction includes a prefix byte. Upper 4 bits of the byte indicates port number, and the rest 4 bits indicate the way to decode rest of bytes for MIDI message. Except for system exclusive messages, the rest bits are the same as status bits of the message without channel bits. For system exclusive messages, the rest bits are encoded according to included message bytes. For example: message: f0 7e 7f 09 01 f7 offset: content (little endian, port 0) '0000: 0x04f07e7f '0004: 0x070901f7 message: f0 00 00 66 14 20 00 00 00 f7 offset: content (little endian, port 1) '0014: 0x14f00000 '0018: 0x14661420 '001c: 0x14000000 '0020: 0x15f70000 message: f0 00 00 66 14 20 00 00 f7 offset: content (little endian, port 0) '0078: 0x04f00000 '007c: 0x04661420 '0000: 0x070000f7 This commit supports decoding scheme for the above and allows applications to receive MIDI messages via ALSA rawmidi interface. The lower 8 bytes of destination address is fixed to 0x'0000'0000, thus this driver expects userspace applications to configure option register with bitflag 0x00002000 in advance. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add model-dependent parameter for address range to receive ↵Takashi Sakamoto2019-01-223-1/+4
| | | | | | | | | | | | | | | | | async transaction In Fireface series, drivers can register destination address for asynchronous transaction which transfers MIDI messages from device. In former models, all of the transactions arrive at the registered address without any offset. In latter models, each of the transaction arrives at the registered address with sequential offset within 0x00 to 0x7f. This seems to be for discontinuity detection. This commit adds model-dependent member for the address range. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: change prototype of handler for async transaction with MIDI ↵Takashi Sakamoto2019-01-223-4/+9
| | | | | | | | | | | | | | | | | | | messages In a series of Fireface, devices transfer asynchronous transaction with MIDI messages. In the transaction, content is different depending on models. ALSA fireface driver has protocol-dependent handler to pick up MIDI messages from the content. In latter models of the series, the transaction is transferred to range of address sequentially. This seems to check continuity of transferred messages. This commit changes prototype of the handler to receive offset of address for received transactions. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add support for Fireface UCXTakashi Sakamoto2019-01-215-9/+310
| | | | | | | | | | | | | | Fireface UFX was shipped by RME GmbH in 2012. This model supports later protocol for management of isochronous communication and synchronization of sampling transmission frequency. This commit adds support for the model. At present, it's not clear how to encode MIDI messages and decide destination address for asynchronous transaction, thus this commit adds support for isochronous communication for PCM frames only. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: code refactoring to parse of clock configurationTakashi Sakamoto2019-01-213-101/+89Star
| | | | | | | | | | A procedure to retrieve clock configuration is used by two callers. Each of caller has duplicated code to parse bits. This commit adds refactoring to remove the duplicated code. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: code refactoring for dump of sync statusTakashi Sakamoto2019-01-211-101/+75Star
| | | | | | | | This commit adds refactoring for dump of sync status by adding tables for check bits. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add protocol-dependent operation to get clock statusTakashi Sakamoto2019-01-215-70/+71
| | | | | | | | This commit adds a member for a callback function to get clock status to former protocol. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add protocol-dependent operation to switch mode to fetch PCM ↵Takashi Sakamoto2019-01-213-38/+41
| | | | | | | | | | frame This commit adds a member for a callback function to switch frame fetching mode to former protocol. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add protocol-dependent operation to dump statusTakashi Sakamoto2019-01-213-204/+214
| | | | | | | | This commit adds a member for a callback function to dump status and move existing code to former protocol. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: obsolete proc node to leave one nodeTakashi Sakamoto2019-01-211-8/+12
| | | | | | | | | | | | In a series of Fireface, latter protocol has no way for drivers to retrieve current clock configuration. On the other hand, this driver has proc node for it. This commit removes a proc node to dump both clock configuration and synchronization status in one proc node. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: unify protocol layer for FF400/FF800Takashi Sakamoto2019-01-213-163/+148Star
| | | | | | | This commit moves codes for Fireface 400 to a file of former protocol. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: rename protocol layer for former modelsTakashi Sakamoto2019-01-212-8/+7Star
| | | | | | | | | | In a series of Fireface, later model supports different protocol from former models. This commit is a preparation to support both of protocols. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: bebob: fix model-id of unit for Apogee EnsembleTakashi Sakamoto2018-12-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes hard-coded model-id for an unit of Apogee Ensemble with a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly known as BridgeCo AG). I note that this model supports three modes in the number of data channels in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is switched by Vendor-dependent AV/C command, like: $ cd linux-firewire-utils $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs) When switching between different mode, the unit disappears from IEEE 1394 bus, then appears on the bus with different combination of stream formats. In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else up to 192.0 kHz. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': True, 'chip_ID': 21474898341, 'cmc': True, 'cyc_clk_acc': 100, 'generation': 2, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['HARDWARE_VERSION', 19], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble'], ['VERSION', 5297], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble']]], [ 'DEPENDENT_INFO', [ ['SPECIFIER_ID', 2037], ['VERSION', 1], [(58, 'IMMEDIATE'), 16777159], [(59, 'IMMEDIATE'), 1048576], [(60, 'IMMEDIATE'), 16777159], [(61, 'IMMEDIATE'), 6291456]]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: code refactoring to handle model-specific registersTakashi Sakamoto2018-12-163-15/+6Star
| | | | | | | | | | | As a result of investigation for Fireface 800, 'struct snd_ff_spec.regs' is just for higher address to receive tx asynchronous packets of MIDI messages, thus it can be simplified. This commit simplifies it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add support for packet streaming on Fireface 800Takashi Sakamoto2018-12-162-16/+129
| | | | | | | | | | | | | | | | | | | | | | | | | This commit adds a functionality to multiplex PCM frames into isochronous packets and demultiplex PCM frames from isochronous packets for ALSA PCM applications. Fireface 800 voluntarily maintains resources for tx isochronous communication. It performs reservation of isochronous channel and allocation/update of bandwidth in some cases below: - at a first request to allocation after bus resets - at requests to allocation when further bandwidth is required When request is grant and the unit is prepared, read data from 0x0000801c0008 represents isochronous channel for tx stream, then the unit can handle requests to start communication. If driver send the request without checking the register, the unit takes panic to continue bus resets. The unit starts transmission of tx packets after receiving several rx packets from driver. I note that the unit can process tx/rx packets and generate/record sound regardless of HOST LED. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: allocate isochronous resources in mode-specific implementationTakashi Sakamoto2018-12-162-55/+68
| | | | | | | | | | | The way to maintain isochronous resources on bus is different between Fireface 400/800. This commit is a preparation. This commit moves a function to allocate resource to model-dependent implementation. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: code refactoring to handle multiplier modeTakashi Sakamoto2018-12-163-28/+58
| | | | | | | | | | | | Fireface 400/800 use three modes against the number of data channels in data block for both tx/rx packets. This commit adds refactoring for it. Some enumerators are added to represent each of mode and a function is added to calculate the mode from sampling frequency code (sfc). Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: share helper function to switch fetching modeTakashi Sakamoto2018-12-163-33/+36
| | | | | | | | | | | Both of Fireface 400/800 have the same register to switch frame fetching mode regardless of difference of available number of PCM frames in rx isochronous packet. This commit moves a helper function from model-dependent implementation. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: fix for state to fetch PCM framesTakashi Sakamoto2018-12-161-1/+1
| | | | | | | | | | | | | | According to my memo at hand and saved records, writing 0x00000001 to SND_FF_REG_FETCH_PCM_FRAMES disables fetching PCM frames in corresponding channel, however current implement uses reversed logic. This results in muted volume in device side during playback. This commit corrects the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 76fdb3a9e13a ('ALSA: fireface: add support for Fireface 400') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-lib: use the same print format for 'without_header' tracepointsTakashi Sakamoto2018-12-161-1/+1
| | | | | | | | | | | | | An initial commit to add tracepoints for packets without CIP headers uses different print formats for added tracepoints. However this is not convenient for users/developers to prepare debug tools. This commit uses the same format for the two tracepoints. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: b164d2fd6e49 ('ALSA: firewire_lib: add tracepoints for packets without CIP headers') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-lib: fix wrong assignment for 'out_packet_without_header' ↵Takashi Sakamoto2018-12-161-1/+1
| | | | | | | | | | | | | | | tracepoint An initial commit to add tracepoints for packets without CIP headers introduces a wrong assignment to 'data_blocks' value of 'out_packet_without_header' tracepoint. This commit fixes the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: b164d2fd6e49 ('ALSA: firewire_lib: add tracepoints for packets without CIP headers') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-lib: fix wrong handling payload_length as payload_quadletTakashi Sakamoto2018-12-161-1/+3
| | | | | | | | | | | | | | | | In IEC 61883-1/6 engine of ALSA firewire stack, a packet handler has a second argument for 'the number of bytes in payload of isochronous packet'. However, an incoming packet handler without CIP header uses the value as 'the number of quadlets in the payload'. This brings userspace applications to receive the number of PCM frames as four times against real time. This commit fixes the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 3b196c394dd ('ALSA: firewire-lib: add no-header packet processing') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add support for Fireface 800 with MIDI functionality onlyTakashi Sakamoto2018-12-115-13/+70
| | | | | | | | | | | | | | | | | | | | Fireface 800 is a flagship model of RME GmbH for audio and music units on IEEE 1394 bus, shipped 2004. This model consists of four chips: - TI TSB81BA3D for physical layer on cable environment of EEE 1394 bus - TI TSB82AA2 for link layer for 1394 OHCI bus bridge to PCI bus - Xilinx Spartan-3 FPGA XC3S400 - Xilinx High-Performance CPLD XC9572XL This commit adds support Fireface 800. In this time, the support is restricted to its MIDI functionality, thus this commit adds some condition statements to avoid touching streaming functionality. Unlike Fireface 400, Fireface 800 has no functionality to suppress asynchronous transactions for MIDI messages except for unregister of listen address in controller side, thus the feature is available as is. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: localize a handler for MIDI messages on tx transactionTakashi Sakamoto2018-12-113-33/+40
| | | | | | | | | | | Content of asynchronous transaction for MIDI messages differs between Fireface 400 and 800. This commit adds a model-specific handler for the transaction and adds arrangement. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add driver data for register for MIDI high addressTakashi Sakamoto2018-12-114-34/+34
| | | | | | | | | | | | | | Fireface 400 and 800 have the same mechanism to decide address to which asynchronous transactions are sent for MIDI messages, however they use different registers for controllers to notify higher 4 byte of the address. This commit adds a model-specific parameter to represent the address. Additionally, it corrects some comments. I note that these two models have a difference to enable/disable the transaction. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: share register for async transaction of MIDI messagesTakashi Sakamoto2018-12-113-8/+5Star
| | | | | | | | | | | | As long as investigating packet dumps from Fireface 400/800, a register to receive asynchronous transactions for MIDI messages is the same. For Fireface 800, minor register is used. This commit declares macros for the transactions and obsoletes model-specific parameters. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: add support for second optical interface for ADAT streamTakashi Sakamoto2018-12-113-10/+30
| | | | | | | | | | | | Unlike Fireface 400, Fireface 800 have two pair of optical interface for ADAT signal and S/PDIF signal. ADAT signals for the interface are handled for sampling clock source separately. This commit modifies a parser for clock configuration to distinguish these two ADAT signals. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: share helper function to get current sampling rate and clock ↵Takashi Sakamoto2018-12-115-64/+63Star
| | | | | | | | | | | | | source As long as investigating packet dumps from Fireface 400/800, bits on status registers for clock synchronization are the same. This commit moves a parser for a register of clock configuration to obsolete model-specific operations. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: share status and configuration dumpTakashi Sakamoto2018-12-113-198/+176Star
| | | | | | | | | | | As long as investigating packet dumps from Fireface 400/800, bits on status registers for clock synchronization are the same. This commit moves a parser for the registers to obsolete model-specific operations. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: fireface: share some registers for status of clock synchronizationTakashi Sakamoto2018-12-112-7/+9
| | | | | | | | | | As long as investigating packet dumps from Fireface 400/800, status registers for clock synchronization is common. This commit moves some macros for them to header file. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'for-linus' into for-nextTakashi Iwai2018-12-101-1/+1
|\ | | | | | | | | | | | | Back-merge for resolving the conflict of fixup entries added in both branches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: fireface: fix reference to wrong register for clock configurationTakashi Sakamoto2018-12-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an initial commit, 'SYNC_STATUS' register is referred to get clock configuration, however this is wrong, according to my local note at hand for reverse-engineering about packet dump. It should be 'CLOCK_CONFIG' register. Actually, ff400_dump_clock_config() is correctly programmed. This commit fixes the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 76fdb3a9e13a ('ALSA: fireface: add support for Fireface 400') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: firewire-tascam: notify events of change of state for userspace ↵Takashi Sakamoto2018-11-232-2/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | applications In former commits, ALSA firewire-tascam driver queues events to notify change of state of control surface to userspace via ALSA hwdep interface. This commit implements actual notification of the events. The events are not governed by real time, thus no need to care underrun. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: firewire-tascam: apply small refactoring to handle several type of ↵Takashi Sakamoto2018-11-231-12/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | event for hwdep interface In later commits, ALSA firewire-tascam driver will allow userspace applications to receive notifications about changes of device state, transferred in tx isochronous packet. At present, all of drivers in ALSA firewire stack have mechanism to notify change of status of packet streaming, thus it needs to distinguish these two types of notification. This commit is a preparation for the above. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: firewire-tascam: queue events for change of control surfaceTakashi Sakamoto2018-11-233-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Units of TASCAM FireWire series transfer image of states of the unit in tx isochronous packets. Demultiplexing of the states from the packets is done in software interrupt context regardless of any process context. In a view of userspace applications, it needs to have notification mechanism to catch change of the states. This commit implements a queue to store events for the notification. The image of states includes fluctuating data such as level of gain/volume for physical input/output and position of knobs. Therefore the events are queued corresponding to some control features only. Furthermore, the queued events are planned to be consumed by userspace applications via ALSA hwdep interface. This commit suppresses event queueing when no applications open the hwdep interface. However, the queue is maintained in an optimistic scenario, thus without any care against overrrun. This is reasonable because target events are useless just to handle PCM frames. It starts queueing when an usespace application opens hwdep interface, thus it's expected to read the queued events steadily. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: firewire-tascam: add new hwdep ioctl command to get state imageTakashi Sakamoto2018-11-231-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a previous commit, ALSA firewire-tascam driver stores state image from tx isochronous packets. This image includes states of knob, fader, button of control surface, level of gain/volume of each physical inputs/outputs, and so on. It's useful for userspace applications to read whole of the image. This commit adds a unique ioctl command for ALSA hwdep interface for the purpose. For actual meaning of each bits in this image, please refer to discussion in alsa-devel[1]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2018-October/140785.html Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: firewire-tascam: pick up data of state from tx isochronous pakcetsTakashi Sakamoto2018-11-232-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | Units of TASCAM FireWire series multiplex PCM frames and state of control surface into the same tx isochronous packets. One isochronous packet includes a part of the state in a quadlet data. An image of the state consists of 64 quadlet data. This commit demultiplexes the state from tx isochronous packets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: oxfw: add support for APOGEE duet FireWireTakashi Sakamoto2018-11-132-0/+9
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for APOGEE duet FireWire, launched 2007, already discontinued. This model uses Oxford Semiconductor FW971 as its communication engine. Below is information on Configuration ROM of this unit. The unit supports some AV/C commands defined by Audio subunit specification and vendor dependent commands. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 42949742248, 'cmc': False, 'cyc_clk_acc': 255, 'generation': 0, 'imc': False, 'isc': True, 'link_spd': 3, 'max_ROM': 0, 'max_rec': 64, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 122333], ['DESCRIPTOR', 'Duet'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 122333], ['DESCRIPTOR', 'Duet']]]]} Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-lib: fix insufficient PCM rule for period/buffer sizeTakashi Sakamoto2018-10-301-48/+9Star
| | | | | | | | | | | | | | | | | | | | In a former commit, PCM constraint based on LCM of SYT_INTERVAL was obsoleted with PCM rule. However, the new PCM rule brings -EINVAL in some cases that max/min values of size of buffer/period is not multiples of one of values of SYT_INTERVAL. For example, pulseaudio always fail to configure PCM substream. This commit changes strategy for the PCM rule. Although the buggy rules had a single dependency (rate from period, period from rate, rate from buffer, buffer from rate), a revised rule has double dependencies (period from period/rate, buffer from buffer/rate). A step of value is calculated with table of SYT_INTERVAL and list of available rates. This prevents interval template which brings -EINVAL to a call of snd_interval_refine(). Fixes: 5950229582bc('ALSA: firewire-lib: add PCM rules to obsolete PCM constraints based on LCM of SYT_INTERVAL') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: dice: fix to wait for releases of all ALSA character devicesTakashi Sakamoto2018-10-271-2/+2
| | | | | | | | | | | | | | In a development period for Linux kernel v4.20, drivers in ALSA firewire stack were changed to wait for releases of all ALSA character devices at .remove callback of bus driver. However, ALSA dice driver is partly out of this change. This bug can bring fault to user process which holds the last of character device in unplugging. This commit fixes the driver to wait in the callback. Fixes: 61ccc6f6b27c ('ALSA: firewire: block .remove callback of bus driver till all of ALSA character devices are released') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-motu: add missing entries to KconfigTakashi Sakamoto2018-10-121-0/+2
| | | | | | | MOTU Traveler and Audio Express are supported as well. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: isight: fix leak of reference to firewire unit in error path of .probe ↵Takashi Sakamoto2018-10-121-5/+5
| | | | | | | | | | | callback In some error paths, reference count of firewire unit is not decreased. This commit fixes the bug. Fixes: 5b14ec25a79b('ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire: simplify cleanup process when failing to register sound cardTakashi Sakamoto2018-10-108-138/+44Star
| | | | | | | | | | | | In former commits, .private_free callback releases resources just for data transmission. This release function can be called without the resources are actually allocated in error paths. This commit applies a small refactoring to clean up codes in error paths. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: bebob/fireworks: simplify handling of local device entry tableTakashi Sakamoto2018-10-102-25/+13Star
| | | | | | | | | | | | In drivers of ALSA firewire stack, bebob and fireworks drivers have local device entry table. At present, critical section to operate the table is from the beginning/end of 'do_registration' call. This can be more narrow and simplify codes. This commit applies small refactoring for the above purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-09 03:35:04 +0200