summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/da7210.c
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: da7210: convert to SPDX identifiersKuninori Morimoto2018-07-301-16/+11Star
| | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: da7210: Use devm_snd_soc_register_component()weiyongjun (A)2018-03-191-1/+1
| | | | | | | | | | Since the remove callback is removed, the snd_soc_unregister_component() is missing when remove device. Using devm_snd_soc_register_component() instead of snd_soc_register_component(). Fixes: d06f33aed85c ("ASoC: da7210: replace codec to component") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: da7210: replace codec to componentKuninori Morimoto2018-02-121-97/+84Star
| | | | | | | | | | | | | | Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codecs: add const to snd_soc_codec_driver structuresBhumika Goyal2017-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Declare snd_soc_codec_driver structures as const as they are only passed as an argument to the function snd_soc_register_codec. This argument is of type const, so declare the structures with this property as const. In file codecs/sn95031.c, snd_soc_codec_driver structure is also used in a copy operation along with getting passed to snd_soc_register_codec. So, it can be made const too. Done using Coccinelle: @match disable optional_qualifier@ identifier s; position p; @@ static struct snd_soc_codec_driver s@p={...}; @good1@ identifier match.s; position p; @@ snd_soc_register_codec(...,&s@p,...) @bad@ identifier match.s; position p!={match.p,good1.p}; @@ s@p @depends on !bad disable optional_qualifier@ identifier match.s; @@ static +const struct snd_soc_codec_driver s={...}; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: codec duplicated callback function goes to component on da7210Kuninori Morimoto2016-08-081-7/+8
| | | | | | | | | | codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Drop owner assignment from spi_driversAndrew F. Davis2015-10-281-1/+0Star
| | | | | | | | | An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'asoc/topic/tas2552', 'asoc/topic/tas5086', ↵Mark Brown2015-08-301-13/+9Star
|\ \ | | | | | | | | | 'asoc/topic/tegra', 'asoc/topic/tlv' and 'asoc/topic/topology' into asoc-next
| | * ASoC: da7210: Replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGELars-Peter Clausen2015-08-051-13/+9Star
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD() that it automatically calculates the number of items in the TLV and is hence less prone to manual error. Generate using the following coccinelle script // <smpl> @@ declarer name DECLARE_TLV_DB_RANGE; identifier tlv; constant x; @@ -unsigned int tlv[] = { - TLV_DB_RANGE_HEAD(x), +DECLARE_TLV_DB_RANGE(tlv, ... -}; +); // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| |
| \
*-. \ Merge remote-tracking branches 'asoc/topic/rcar', 'asoc/topic/reg-default', ↵Mark Brown2015-08-301-2/+2
|\ \ \ | | |/ | |/| | | | 'asoc/topic/rl6231', 'asoc/topic/rockchip' and 'asoc/topic/rt286' into asoc-next
| | * Merge tag 'regmap-seq-delay-api' of ↵Mark Brown2015-07-171-2/+2
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-reg-default regmap: Create a new struct reg_sequence for register sequences In order to allow us to start adding extra annotations for sequences without bloating register default tables duplicate the structure under the new name reg_sequence and update the APIs to use that instead of reg_default. Conflicts: sound/soc/codecs/da7210.c sound/soc/codecs/rt5651.c sound/soc/codecs/wm8993.c
| | | * regmap: Use reg_sequence for multi_reg_write / register_patchNariman Poushin2015-07-161-2/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the functionality using sequences of register writes from the functions that take register defaults. This change renames the arguments in order to support the extension of reg_sequence to take an optional delay to be applied after any given register in a sequence is written. This avoids adding an int to all register defaults, which could substantially increase memory usage for regmaps with large default tables. This also updates all the clients of multi_reg_write/register_patch. Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | Merge branches 'topic/owner' and 'topic/reg-default' of ↵Mark Brown2015-07-161-3/+3
|\ \ \ | | |/ | |/| | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-max9877
| * | ASoC: Constify reg_default tablesAxel Lin2015-07-071-3/+3
| |/ | | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* / ASoC: drivers: Drop owner assignment from i2c_driverKrzysztof Kozlowski2015-07-151-1/+0Star
|/ | | | | | | | i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Add snd_soc_kcontrol_codec() helper functionLars-Peter Clausen2014-04-141-2/+2
| | | | | | | | | | | | | | | For CODEC controls snd_kcontrol_chip() currently returns a pointer to the CODEC that registered the control. With the upcoming consolidation of platform and CODEC controls this will change. Prepare for this by introducing the snd_soc_kcontrol_codec() helper function that will hide the implementation details of how the CODEC for a control can be obtained. This will allow us to change this easily in the future. The patch also updates all CODEC drivers to use the new helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* Merge remote-tracking branch 'asoc/topic/io' into asoc-nextMark Brown2014-03-131-8/+0Star
|\
| * ASoC: codec: Simplify ASoC probe code.Xiubo Li2014-03-111-8/+0Star
| | | | | | | | | | | | | | | | For some CODEC drivers like who act as the MFDs children are ignored by this patch. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* | ASoC: da7210: Use SOC_ENUM_SINGLE_DECL()Takashi Iwai2014-02-201-10/+10
|/ | | | | | | | | Just replace with the helper macro. No functional change at all. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
*-. Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', ↵Mark Brown2014-01-161-5/+5
|\ \ | | | | | | | | | 'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai
| | * ASoC: da7210: Use params_width() rather than memory formatMark Brown2014-01-131-5/+5
| |/ | | | | | | Signed-off-by: Mark Brown <broonie@linaro.org>
* / ASoC: da7210: Use IS_ENABLED() macroFabio Estevam2013-11-271-3/+3
|/ | | | | | | Using the IS_ENABLED() macro can make the code shorter and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* ASoC: codecs: remove __dev* attributesBill Pemberton2012-12-091-7/+7
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Remove unnecessary regmap_exit callSachin Kamat2012-12-031-10/+1Star
| | | | | | | | Use of devm_regmap_init_spi does not require an explicit regmap_exit call. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Use devm_regmap_init_i2c()Sachin Kamat2012-11-281-11/+2Star
| | | | | | | | devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Minor improvements and a bugfixAshish Chavan2012-05-031-13/+15
| | | | | | | | | | | | | | | This patch improves playback quality for few sample rates like 8000 and 11025 Hz. This also fixes an issue observed during testing of pll slave mode. Due to the issue, on some rare occasions there was no sound output for first time playback after system boot, though all subsequent playbacks were fine. It was mainly because of the sequence in which SRM bit was enabled. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Minor bugfix for non pll slave modeAshish Chavan2012-04-271-6/+7
| | | | | | | | | | | This patch fixes a bug discovered during testing of non pll slave mode. Due to the bug chip was not getting correctly configured and as a result there was no sound output while playback. After applying this patch, both pll and non pll modes work fine. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Minor update for PLL and SRMAshish Chavan2012-04-171-13/+9Star
| | | | | | | | This patch converts multiple if conditions in to single if with "&&"s. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for PLL and SRMAshish Chavan2012-04-171-38/+187
| | | | | | | | | | | | | | | | | | | | | | | | | | | Current DA7210 driver does support PLL mode fully. It uses fixed value of input master clock and PLL mode is enabled and disabled based on the sampling frequency being used for playback or recording. It also doesn't support Sample Rate Measurement feature of DA7210 hardware. This patch adds full support for PLL and SRM. Basically following three modes of operation are possible for DA7210 hardware, (1) I2S SLAVE mode with PLL bypassed (2) I2S SLAVE mode with PLL enabled (3) I2S Master mode with PLL enabled This patch adds support for all three modes. Also, in case of SLAVE mode with PLL, it supports SRM (Sample Rate Measurement) feature of the chip. Actually this patch was submitted earlier and received some review comments, but after that the driver got update by other patches. Because of that, I am considering this as new patch and not versioning it based of previous patches. This version tries to take care of all review comments received for earlier submissions. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: codecs: Remove rtd->codec usage from CODEC driversMark Brown2012-04-041-2/+1Star
| | | | | | | | | | In order to support CODEC<->CODEC links remove the assumption that there is only a single CODEC on a DAI link by removing the use of the CODEC pointer in the rtd from the CODEC drivers. They are already being passed their DAI whenever they are passed an rtd and can get the CODEC from there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for spi regmapAshish Chavan2012-04-011-21/+133
| | | | | | | | | This patch adds support for spi regmap feature to existing da7210 driver. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Remove extra registers from defaults listAshish Chavan2012-03-091-88/+0Star
| | | | | | | | | | | | This patch removes following registers from reg map defaults, - Registers which are currently not used by driver - Non existing registers - Volatile registers Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Update for using I2C regmapAshish Chavan2012-03-081-38/+196
| | | | | | | | | | | Current DA7210 driver has I2C support using older register cache methods. This patch updates it for latest regmap framework. This has been tested on DA7210 EVB with Samsung SMDK6410 board. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for line input and micAshish Chavan2012-01-021-0/+77
| | | | | | | | | | DA7210 has three line inputs (AUX1 Left, AUX1 Right and AUX2) and a stereo MIC. This patch adds gain controls for MIC, AUX1, AUX2 as well as INPGA. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Convert da7210 to devm_kzalloc()Axel Lin2011-12-271-5/+2Star
| | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Remove unneeded platform_device.h inclusions from CODECsMark Brown2011-11-271-1/+0Star
| | | | | | They've not been needed for a long time if they were ever required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen2011-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix duplicate const warnings in da7210.cMark Brown2011-11-101-2/+2
| | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* sound: Add module.h to the previously silent sound usersPaul Gortmaker2011-11-011-0/+1
| | | | | | | | Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* ASoC: da7210: Add support for line out and DACAshish Chavan2011-10-221-0/+96
| | | | | | | | | | | DA7210 has three line outputs. OUT1 Left, OUT1 Right and OUT2 (mono). This patch adds support for gain controls for these three line outs. It also adds support for overall DAC gain control. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for DAPMAshish Chavan2011-10-221-24/+121
| | | | | | | | | | This patch adds support for DAPM covering all inputs and outputs as well as ADC and DAC. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for ALC and Noise suppressionAshish Chavan2011-10-191-0/+110
| | | | | | | | | | | | | | | | This patch adds controls to set following ALC parameters, - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay It also adds a switch to enable/disable noise suppression. As per DA7210 data sheet, ALC and noise suppression can be enabled only if certain conditions are met. This condition checks are handled by simply using "_EXT" version of controls to capture change events. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwod <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for mute and zero cross controlsAshish Chavan2011-10-191-0/+44
| | | | | | | | | | | | | | This patch adds support for below set of controls, (1) Mute controls for MIC, AUX and ADC (2) Zero cross controls for head phone, AUX, INPGA and line out (3) Head phone mode selection - class H or G It also adds digital_mute() call back. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for High pass and Voice filters for ADC and DACAshish Chavan2011-10-171-25/+32
| | | | | | | | | | | | | This patch add controls for setting cut-off for high pass and voice filters of ADC and DAC. There are also switches to enable/disable these filters. Also removed hard coded, fixed values of these parameters used by previous version of driver. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for ADC & DAC equalizersAshish Chavan2011-10-171-0/+37
| | | | | | | | | This patch adds support for ADC and DAC five band equalizers available on DA7210 codec. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: bugfix for head phone volume controlAshish Chavan2011-10-141-4/+6
| | | | | | | | | This patch takes care of reserved bits of headphone volume register by using correct volume range. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Convert DA7210 to table based DAPM initMark Brown2011-10-141-3/+3
| | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for other DAI word lengths, format and modeAshish Chavan2011-10-121-1/+22
| | | | | | | | | | | This patchs adds support for following, (1) DAI 20 and 32 bit word sizes (2) DAI left and right justified formats (3) DAI slave mode Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: convert to soc-cacheAxel Lin2011-10-121-78/+45Star
| | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Decouple DAPM from CODECsLiam Girdwood2010-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: code clean upKuninori Morimoto2010-09-161-9/+9
| | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-22 21:54:17 +0200