summaryrefslogtreecommitdiffstats
path: root/sound/soc
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: Set full range of WM8994 FLL Fratio valuesMark Brown2010-04-201-1/+10
| | | | | | | | Use all the available Fratio values when configuring the WM8994 FLL, not just 0 and 3, following more complete characterisation of the device performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Support FLL input clock selection on WM8994Mark Brown2010-04-202-2/+20
| | | | | | | | The WM8994 FLL can be clocked from one of four inputs, the two MCLKs and the LRCLK and BCLK of the AIF associated with the FLL. Allow all four inputs to be used rather than defaulting to MCLK1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Fencepost error in reg cache readPhil Carmody2010-04-201-1/+1
| | | | | | | | | An index equal to the array size may not be accessed. Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: missing conversions to snd_soc_codec_*_drvdata()Takashi Iwai2010-04-203-18/+18
| | | | | | | Conversions to snd_soc_codec_{get|set}_drvdata() were missing in some files in the previous commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ASoC: Add indirection for CODEC private dataMark Brown2010-04-1742-246/+246
| | | | | | | | | | | | | | | | One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge branch 'for-2.6.34' into for-2.6.35Mark Brown2010-04-174-29/+45
|\
| * ASoC: imx-ssi: do not call hrtimer_disable in trigger functionSascha Hauer2010-04-151-2/+8
| | | | | | | | | | | | | | | | | | Doing so causes a deadlock, so just signal the timer to stop using an atomic variable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: imx-ssi: increase minimum periods to 4Sascha Hauer2010-04-151-1/+1
| | | | | | | | | | | | | | | | | | Currently the notification of elapsed periods is not very exact. Increase minimum periods to 4 as suggested by Liam Girdwood. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: imx-ssi: Use a hrtimer in FIQ modeSascha Hauer2010-04-081-24/+21Star
| | | | | | | | | | | | | | | | | | | | | | | | Using a regular timer results in poll times < 1 jiffie with small buffers, so we loaded the timer with the actual jiffie value. We can be more accurate using a hrtimer. Also, we have to call snd_pcm_period_elapsed after playing period_bytes and not runtime->period_size (which is in samples and not in bytes). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: imx-pcm-dma-mx2: restart DMA after an errorSascha Hauer2010-04-081-1/+14
| | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: imx-ssi: honor IMX_SSI_DMA flagSascha Hauer2010-04-081-1/+2
| | | | | | | | | | | | | | | | | | | | When checking if we are DMA capable we have to check for the IMX_SSI_DMA flag which is already set from platform_data instead of setting it again when we want to do DMA. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@Slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm2000: remove unused #include <linux/version.h>Huang Weiyi2010-04-081-1/+0Star
| | | | | | | | | | | | | | | | | | Remove unused #include <linux/version.h>('s) in sound/soc/codecs/wm2000.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Zipit Z2 WM8750 ASoC driverMarek Vasut2010-04-123-0/+256
| | | | | | | | | | | | | | | | | | | | This patch adds support for sound through the WM8750 codec on Zipit Z2. Also, this patch incorporates support for detecting headset jack insertion through the jack detection API. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Use SNDRV_PCM_RATE_8000_96000 macro for WM8731Bill Gatliff2010-04-121-5/+1Star
| | | | | | | | | | | | | | Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: WM8750: Convert to new APIMarek Vasut2010-04-093-168/+175
| | | | | | | | | | | | | | | | | | | | | | Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code around. Hugely inspired by WM8753 which was already converted. Also, this patch fixes the Jive and Spitz machine. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'for-2.6.34' into for-2.6.35Mark Brown2010-04-054-66/+91
|\| | | | | | | | | Conflicts due to context changes next to the backported DMA data change: include/sound/soc.h
| * ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack2010-04-0521-71/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7dee] Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Only do WM8994 bias off transition from standbyMark Brown2010-04-051-24/+29
| | | | | | | | | | | | | | | | Otherwise we may try to power down multiple times when the using idle bias off and the driver is removed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devicesMark Brown2010-04-051-23/+15Star
| | | | | | | | | | | | | | | | | | | | | | | | The DCS_DATAPATH_BUSY bit used to monitor the completion of DC servo operations has been deprecated and with some more recente revisions may perform incorrectly, especially when only analogue bypass paths are in use. Switch to using readback from the DC servo command register instead, which is supported for all devices. Without this unacceptably long timeouts may be observed in some circumstances. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Don't do runtime wm_hubs DC servo updates if using offset correctionMark Brown2010-04-051-0/+6
| | | | | | | | | | | | | | | | | | If we need to offset correct the DC servo then don't use runtime recalibration since that is likely to introduce further offsets which will be evident on powerdown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Support second DC servo readback method for wm_hubsMark Brown2010-04-053-12/+33
| | | | | | | | | | | | | | | | | | | | | | More recent Wolfson hubs devices add the ability to read back the DC servo calibration information from the register used to write offsets, and later still ones remove the old readback registers. Add support for the new scheme, and use it for WM8994 device revisions that support it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Avoid wraparound in wm_hubs DC servo correctionMark Brown2010-04-051-2/+4
| | | | | | | | | | | | | | | | If the correction wraps around then a substantial offset would be introduced. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with ↵Janusz Krzysztofik2010-04-021-9/+8Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | recent ALSA PCM code With recent (2.6.34) chnages in PCM handling, capture stopped working on my OMAP1510 based Amstrad Delta videophone. Using 2.6.34-rc2, I was able to correct the problem in 3 different ways: 1. reverting commit 7b3a177b0d4f92b3431b8dca777313a07533a710, 2. enabling additional jiffies check with echo 4 >/proc/asound/card0/pcm0c0/xrun_debug 3. applying the patch below. Since I wasn't able to reproduce the problem on my i686 PC, I guess the problem is probably machine specific. The patch reuses the method for software emulation of missing hardware pointer, already implemented for playback on OMAP1510. It's possible that event if a hardware pointer is available for capture on this machine, its behaviour may be not compatible with what upper layer expects. If you think the problem may be more general and should be solved differently, on a higher level, I can try to work more on it if you give me a hint. If the patch gets accepted, I suggest it goes as a fix in the current release cycle. Created and tested against linux-2.6.34-rc2. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Implement interrupt based WM8994 microphone detectionMark Brown2010-04-052-3/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | Support interrupt based microphone bias detection. The WM8994 has two microphone bias supplies, with detection supported on both. Detection using GPIOs together with the standard GPIO based jack framework is already supported via the platform data for the WM8994 core driver. Note that as well as the microphone bias itself the system clock and whichever AIF clock is supplying the system clock will need to be enabled for detection to function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'for-2.6.34' into for-2.6.35Mark Brown2010-03-293-8/+12
|\|
| * ASoC: Fix passing platform_data to ac97 bus users and fix a leakGraham Gower2010-03-292-7/+11
| | | | | | | | | | | | | | | | | | | | [The issue is an attempt to write the pdata without the AC97 device allocated when using ac97.c - also added a comment in soc-core.c for the special case for ac97. -- broonie] Signed-off-by: Graham Gower <graham.gower@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8994: playback => captureDan Carpenter2010-03-241-1/+1
| | | | | | | | | | | | | | | | | | Sparse caught that initialize "playback" two times instead of initializing "capture". Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: ad193x: move codec register/unregister to bus probe/removeBarry Song2010-03-291-58/+44Star
| | | | | | | | | | | | | | | | | | | | | | The way i've factored out the bus probe and removal functions so that there's no code in the individual I2C and SPI functions means that the register() and unregister() functions could just be squashed into the bus_probe() and bus_remove() functions. Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'topic/asoc' of ↵Mark Brown2010-03-294-0/+4
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.35
| * | ASoC: update gfp/slab.h includesTejun Heo2010-03-292-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ASoC: Fix file permission of soc/codecs/twl6040.cTakashi Iwai2010-03-291-0/+0
| | | | | | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ASoC: TWL6040: use of kzalloc/kfree requires the include of slab.hStephen Rothwell2010-03-291-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | ASoC: update for removeal of slab.h from percpu.hStephen Rothwell2010-03-291-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ASoC: fsi: Add FSI2 device supportKuninori Morimoto2010-03-262-11/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM-SHMOBILE series have FIFO-buffered serial interface 2 (FSI2) device which is advanced version of FSI. This patch add simple support for it. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: fsi: Add FIFO size calculateKuninori Morimoto2010-03-261-27/+43
| | | | | | | | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: fsi: IRQ related process had be unitedKuninori Morimoto2010-03-241-14/+39
| | | | | | | | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: fsi: ensures process inside master lockKuninori Morimoto2010-03-241-11/+11
|/ / | | | | | | | | | | | | | | | | | | | | | | | | Bit operation for fsi_master should be done inside master lock. But soft-reset/interrupt operation were outside of it. This patch modify this problem. It still allow to INT_ST outside-operation on fsi_interrupt, but it is not problem. Because this register doesn't need the bit operation. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: ak4642: Add enhanced sampling rateKuninori Morimoto2010-03-231-5/+63
| | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: ak4642: Add set_fmt function for snd_soc_dai_opsKuninori Morimoto2010-03-232-24/+49
| | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: ak4642: Add pll select supportKuninori Morimoto2010-03-232-7/+43
| | | | | | | | | | | | | | | | | | | | | | Current ak4642 was not able to select pll. This patch add support it. It still expect PLL base input pin is MCKI. see Table 5 "setting of PLL Mode" of datasheet Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Implement WM8994 DAI tristate supportMark Brown2010-03-231-0/+38
| | | | | | | | | | | | | | | | This also adds the first DAI operation for AIF3 so fill out the ID and the ops for that too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | Merge branch 'for-2.6.34' into for-2.6.35Mark Brown2010-03-224-35/+66
|\|
| * ASoC: Remove BROKEN from i.MX audio after dependencies mergedMark Brown2010-03-221-1/+1
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * Merge commit 'v2.6.34-rc2' into for-2.6.34Mark Brown2010-03-223-34/+65
| |\
| | * Merge branch 'for-linus' of ↵Linus Torvalds2010-03-131-1/+1
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
| | | * Merge branch 'for-next' into for-linusJiri Kosina2010-03-081-1/+1
| | | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| | | | * tree-wide: Assorted spelling fixesDaniel Mack2010-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-03-132-33/+64
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
| | | * | | Merge branch 'origin' into devel-stableRussell King2010-03-0899-3505/+19923
| | | |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
| | | * | | Merge branch 'for-rmk/samsung6' of git://git.fluff.org/bjdooks/linux into ↵Russell King2010-03-081-2/+2
| | | |\ \ \ | | | | | | | | | | | | | | | | | | | | | devel-stable
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-11 12:12:23 +0200