From 1b2b1e752de4372a74bda01141adaf77e68a328f Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 23 Jun 2018 21:38:28 +0200 Subject: ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts meson-gx-p23x-q20x.dtsi is currently used by five boards: - Amlogic P230 and P231 (which should be identical, apart from the external RGMII PHY on P230 whereas P231 can only use the internal PHY) - Amlogic Q200 (identical to P230 but with an S912 GXM SoC instead of a GXL S905D SoC) and Q201 (identical to P231 but with an S912 GXM SoC instead of a GXL S905D SoC) - NEXBOX A1 (based on the S912 GXM SoC) The Amlogic P230 board uses a Broadcom BCM4356 SDIO wifi chip. Since the other Amlogic reference design boards are very similar it's safe to assume that these also use a Broadcom based SDIO wifi chip (which is also how it was configured in meson-gx-p23x-q20x.dtsi). However, NEXBOX A1 comes with a "longsys LTM8830" SDIO wifi module, which is based on the "Qualcomm Atheros QCA9377-3(QCA1023-0)" chipset. Thus move the wifi node from meson-gx-p23x-q20x.dtsi to each of the four Amlogic reference board's .dts files. There are no devicetree bindings for the QCA9377 SDIO wifi module yet, so nothing is added to meson-gxm-nexbox-a1.dts. Fixes: f51b454549b812 ("ARM64: dts: meson-gxm: Add support for the Nexbox A1") Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 5 ----- arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 7 +++++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts | 7 +++++++ arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 7 +++++++ arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts | 7 +++++++ 5 files changed, 28 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 01616982af0d..765247bc4f24 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -172,11 +172,6 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; }; /* SD card */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 9c5be060fd5e..15014faa2ab2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -100,3 +100,10 @@ remote-endpoint = <&hdmi_connector_in>; }; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts index 80a231476b80..92c425d0259c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 432f7a435fba..73d656e4aade 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -71,3 +71,10 @@ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; }; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts index 8d132b17514a..d02b80d77378 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; -- cgit v1.2.3-55-g7522