From 44f2c586a3553154bc6549eb696c7716c85f910b Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 14 Oct 2009 12:22:20 +0200 Subject: MIPS: Alchemy: Fix hang with high-frequency edge interrupts The handle_edge_irq() flowhandler disables edge int sources which occur too fast (i.e. another edge comes in before the irq handler function had a chance to finish). Currently, the mask_ack() callback does not ack the edges in hardware, leading to an endless loop in the flowhandler where it tries to shut up the irq source. When I rewrote the alchemy IRQ code I wrongly assumed the mask_ack() callback was only used by the level flowhandler, hence it omitted the (at the time pointless) edge acks. Turned out I was wrong; so here is a complete mask_ack implementation for Alchemy IC, which fixes the above mentioned problem. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/irq.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index c88c821b4c36..d670928afcfd 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -354,6 +354,28 @@ static void au1x_ic1_ack(unsigned int irq_nr) au_sync(); } +static void au1x_ic0_maskack(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + au_writel(1 << bit, IC0_WAKECLR); + au_writel(1 << bit, IC0_MASKCLR); + au_writel(1 << bit, IC0_RISINGCLR); + au_writel(1 << bit, IC0_FALLINGCLR); + au_sync(); +} + +static void au1x_ic1_maskack(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE; + + au_writel(1 << bit, IC1_WAKECLR); + au_writel(1 << bit, IC1_MASKCLR); + au_writel(1 << bit, IC1_RISINGCLR); + au_writel(1 << bit, IC1_FALLINGCLR); + au_sync(); +} + static int au1x_ic1_setwake(unsigned int irq, unsigned int on) { unsigned int bit = irq - AU1000_INTC1_INT_BASE; @@ -379,25 +401,21 @@ static int au1x_ic1_setwake(unsigned int irq, unsigned int on) /* * irq_chips for both ICs; this way the mask handlers can be * as short as possible. - * - * NOTE: the ->ack() callback is used by the handle_edge_irq - * flowhandler only, the ->mask_ack() one by handle_level_irq, - * so no need for an irq_chip for each type of irq (level/edge). */ static struct irq_chip au1x_ic0_chip = { .name = "Alchemy-IC0", - .ack = au1x_ic0_ack, /* edge */ + .ack = au1x_ic0_ack, .mask = au1x_ic0_mask, - .mask_ack = au1x_ic0_mask, /* level */ + .mask_ack = au1x_ic0_maskack, .unmask = au1x_ic0_unmask, .set_type = au1x_ic_settype, }; static struct irq_chip au1x_ic1_chip = { .name = "Alchemy-IC1", - .ack = au1x_ic1_ack, /* edge */ + .ack = au1x_ic1_ack, .mask = au1x_ic1_mask, - .mask_ack = au1x_ic1_mask, /* level */ + .mask_ack = au1x_ic1_maskack, .unmask = au1x_ic1_unmask, .set_type = au1x_ic_settype, .set_wake = au1x_ic1_setwake, -- cgit v1.2.3-55-g7522