From e34f2ff40e0339f6a379e1ecf49e8f2759056453 Mon Sep 17 00:00:00 2001 From: Giedrius Statkevičius Date: Thu, 1 Sep 2016 20:47:02 +0300 Subject: ath9k: bring back direction setting in ath9k_{start_stop} A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup led_pin initial") that broken the WLAN status led on my laptop with AR9287 after suspending and resuming. Steps to reproduce: * Suspend (laptop) * Resume (laptop) * Observe that the WLAN led no longer turns ON/OFF depending on the status and is always red Even though for my case it only needs to be set to OUT in ath9k_start but for consistency bring back the IN direction setting as well. Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial") Cc: Miaoqing Pan Cc: Kalle Valo Cc: # 4.7+ Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711 Signed-off-by: Giedrius Statkevičius [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6ca4337a98c4..7cb65c303f8d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -718,9 +718,12 @@ static int ath9k_start(struct ieee80211_hw *hw) if (!ath_complete_reset(sc, false)) ah->reset_power_on = false; - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 1 : 0); + ath9k_hw_gpio_request_out(ah, ah->led_pin, NULL, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + } /* * Reset key cache to sane defaults (all entries cleared) instead of @@ -864,9 +867,11 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_lock_bh(&sc->sc_pcu_lock); - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 0 : 1); + ath9k_hw_gpio_request_in(ah, ah->led_pin, NULL); + } ath_prepare_reset(sc); -- cgit v1.2.3-55-g7522