From ec4d18f219e71ef682fe2d7b9a6d121617fef6d5 Mon Sep 17 00:00:00 2001 From: David S. Miller Date: Thu, 7 Jun 2007 16:58:22 -0700 Subject: [SPARC64]: Fix SBUS IRQ regression caused by PCI-E driver. We used to access the 64-bit IRQ IMAP and ICLR registers of bus controllers 4-bytes in and as a 32-bit register word, since only the low 32-bits were relevant. This seemed like a good idea at the time. But the PCI-E controller requires full 8-byte 64-bit access to these registers, so we switched over to accessing them fully. SBUS was not adjusted properly, which broke interrupts completely. Signed-off-by: David S. Miller --- arch/sparc64/kernel/prom.c | 54 +++++++++++++++++++++++----------------------- arch/sparc64/kernel/sbus.c | 54 +++++++++++++++++++++++----------------------- 2 files changed, 54 insertions(+), 54 deletions(-) diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index 6f4a5284b0ea..61036b346664 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -933,29 +933,29 @@ static void __init fire_irq_trans_init(struct device_node *dp) * This should conform to both Sunfire/Wildfire server and Fusion * desktop designs. */ -#define SYSIO_IMAP_SLOT0 0x2c04UL -#define SYSIO_IMAP_SLOT1 0x2c0cUL -#define SYSIO_IMAP_SLOT2 0x2c14UL -#define SYSIO_IMAP_SLOT3 0x2c1cUL -#define SYSIO_IMAP_SCSI 0x3004UL -#define SYSIO_IMAP_ETH 0x300cUL -#define SYSIO_IMAP_BPP 0x3014UL -#define SYSIO_IMAP_AUDIO 0x301cUL -#define SYSIO_IMAP_PFAIL 0x3024UL -#define SYSIO_IMAP_KMS 0x302cUL -#define SYSIO_IMAP_FLPY 0x3034UL -#define SYSIO_IMAP_SHW 0x303cUL -#define SYSIO_IMAP_KBD 0x3044UL -#define SYSIO_IMAP_MS 0x304cUL -#define SYSIO_IMAP_SER 0x3054UL -#define SYSIO_IMAP_TIM0 0x3064UL -#define SYSIO_IMAP_TIM1 0x306cUL -#define SYSIO_IMAP_UE 0x3074UL -#define SYSIO_IMAP_CE 0x307cUL -#define SYSIO_IMAP_SBERR 0x3084UL -#define SYSIO_IMAP_PMGMT 0x308cUL -#define SYSIO_IMAP_GFX 0x3094UL -#define SYSIO_IMAP_EUPA 0x309cUL +#define SYSIO_IMAP_SLOT0 0x2c00UL +#define SYSIO_IMAP_SLOT1 0x2c08UL +#define SYSIO_IMAP_SLOT2 0x2c10UL +#define SYSIO_IMAP_SLOT3 0x2c18UL +#define SYSIO_IMAP_SCSI 0x3000UL +#define SYSIO_IMAP_ETH 0x3008UL +#define SYSIO_IMAP_BPP 0x3010UL +#define SYSIO_IMAP_AUDIO 0x3018UL +#define SYSIO_IMAP_PFAIL 0x3020UL +#define SYSIO_IMAP_KMS 0x3028UL +#define SYSIO_IMAP_FLPY 0x3030UL +#define SYSIO_IMAP_SHW 0x3038UL +#define SYSIO_IMAP_KBD 0x3040UL +#define SYSIO_IMAP_MS 0x3048UL +#define SYSIO_IMAP_SER 0x3050UL +#define SYSIO_IMAP_TIM0 0x3060UL +#define SYSIO_IMAP_TIM1 0x3068UL +#define SYSIO_IMAP_UE 0x3070UL +#define SYSIO_IMAP_CE 0x3078UL +#define SYSIO_IMAP_SBERR 0x3080UL +#define SYSIO_IMAP_PMGMT 0x3088UL +#define SYSIO_IMAP_GFX 0x3090UL +#define SYSIO_IMAP_EUPA 0x3098UL #define bogon ((unsigned long) -1) static unsigned long sysio_irq_offsets[] = { @@ -1006,10 +1006,10 @@ static unsigned long sysio_irq_offsets[] = { * Interrupt Clear register pointer, SYSIO specific version. */ #define SYSIO_ICLR_UNUSED0 0x3400UL -#define SYSIO_ICLR_SLOT0 0x340cUL -#define SYSIO_ICLR_SLOT1 0x344cUL -#define SYSIO_ICLR_SLOT2 0x348cUL -#define SYSIO_ICLR_SLOT3 0x34ccUL +#define SYSIO_ICLR_SLOT0 0x3408UL +#define SYSIO_ICLR_SLOT1 0x3448UL +#define SYSIO_ICLR_SLOT2 0x3488UL +#define SYSIO_ICLR_SLOT3 0x34c8UL static unsigned long sysio_imap_to_iclr(unsigned long imap) { unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0; diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index 91f6e2a74ad5..a1fd9bcc0b87 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -629,29 +629,29 @@ void sbus_set_sbus64(struct sbus_dev *sdev, int bursts) * This should conform to both Sunfire/Wildfire server and Fusion * desktop designs. */ -#define SYSIO_IMAP_SLOT0 0x2c04UL -#define SYSIO_IMAP_SLOT1 0x2c0cUL -#define SYSIO_IMAP_SLOT2 0x2c14UL -#define SYSIO_IMAP_SLOT3 0x2c1cUL -#define SYSIO_IMAP_SCSI 0x3004UL -#define SYSIO_IMAP_ETH 0x300cUL -#define SYSIO_IMAP_BPP 0x3014UL -#define SYSIO_IMAP_AUDIO 0x301cUL -#define SYSIO_IMAP_PFAIL 0x3024UL -#define SYSIO_IMAP_KMS 0x302cUL -#define SYSIO_IMAP_FLPY 0x3034UL -#define SYSIO_IMAP_SHW 0x303cUL -#define SYSIO_IMAP_KBD 0x3044UL -#define SYSIO_IMAP_MS 0x304cUL -#define SYSIO_IMAP_SER 0x3054UL -#define SYSIO_IMAP_TIM0 0x3064UL -#define SYSIO_IMAP_TIM1 0x306cUL -#define SYSIO_IMAP_UE 0x3074UL -#define SYSIO_IMAP_CE 0x307cUL -#define SYSIO_IMAP_SBERR 0x3084UL -#define SYSIO_IMAP_PMGMT 0x308cUL -#define SYSIO_IMAP_GFX 0x3094UL -#define SYSIO_IMAP_EUPA 0x309cUL +#define SYSIO_IMAP_SLOT0 0x2c00UL +#define SYSIO_IMAP_SLOT1 0x2c08UL +#define SYSIO_IMAP_SLOT2 0x2c10UL +#define SYSIO_IMAP_SLOT3 0x2c18UL +#define SYSIO_IMAP_SCSI 0x3000UL +#define SYSIO_IMAP_ETH 0x3008UL +#define SYSIO_IMAP_BPP 0x3010UL +#define SYSIO_IMAP_AUDIO 0x3018UL +#define SYSIO_IMAP_PFAIL 0x3020UL +#define SYSIO_IMAP_KMS 0x3028UL +#define SYSIO_IMAP_FLPY 0x3030UL +#define SYSIO_IMAP_SHW 0x3038UL +#define SYSIO_IMAP_KBD 0x3040UL +#define SYSIO_IMAP_MS 0x3048UL +#define SYSIO_IMAP_SER 0x3050UL +#define SYSIO_IMAP_TIM0 0x3060UL +#define SYSIO_IMAP_TIM1 0x3068UL +#define SYSIO_IMAP_UE 0x3070UL +#define SYSIO_IMAP_CE 0x3078UL +#define SYSIO_IMAP_SBERR 0x3080UL +#define SYSIO_IMAP_PMGMT 0x3088UL +#define SYSIO_IMAP_GFX 0x3090UL +#define SYSIO_IMAP_EUPA 0x3098UL #define bogon ((unsigned long) -1) static unsigned long sysio_irq_offsets[] = { @@ -700,10 +700,10 @@ static unsigned long sysio_irq_offsets[] = { * Interrupt Clear register pointer, SYSIO specific version. */ #define SYSIO_ICLR_UNUSED0 0x3400UL -#define SYSIO_ICLR_SLOT0 0x340cUL -#define SYSIO_ICLR_SLOT1 0x344cUL -#define SYSIO_ICLR_SLOT2 0x348cUL -#define SYSIO_ICLR_SLOT3 0x34ccUL +#define SYSIO_ICLR_SLOT0 0x3408UL +#define SYSIO_ICLR_SLOT1 0x3448UL +#define SYSIO_ICLR_SLOT2 0x3488UL +#define SYSIO_ICLR_SLOT3 0x34c8UL static unsigned long sysio_imap_to_iclr(unsigned long imap) { unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0; -- cgit v1.2.3-55-g7522