From f2c7c1d09832ef0d6499a9e1a958c3ddc686f723 Mon Sep 17 00:00:00 2001
From: Harshitha Ramamurthy
Date: Tue, 6 Sep 2016 18:05:06 -0700
Subject: i40e: Remove 100 Mbps SGMII support for X722

This patch fixes the problem where driver shows 100 Mbps as a supported speed,
and allows it to be configured for advertising on X722 devices. This patch
fixes the problem by not setting the 100 Mbps SGMII flag for X722 devices.

Without this patch, the user incorrectly thinks that 100 Mbps is supported
and hence might try to advertise it on X722 devices when it is actually not
a supported speed.

Change-ID: I8c3d7c4251a9402d98994ed29749b7b895a0f205
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 53cde5b44346..60f082e10c3e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8608,7 +8608,6 @@ static int i40e_sw_init(struct i40e_pf *pf)
 			     I40E_FLAG_WB_ON_ITR_CAPABLE |
 			     I40E_FLAG_MULTIPLE_TCP_UDP_RSS_PCTYPE |
 			     I40E_FLAG_NO_PCI_LINK_CHECK |
-			     I40E_FLAG_100M_SGMII_CAPABLE |
 			     I40E_FLAG_USE_SET_LLDP_MIB |
 			     I40E_FLAG_GENEVE_OFFLOAD_CAPABLE;
 	} else if ((pf->hw.aq.api_maj_ver > 1) ||
-- 
cgit v1.2.3-55-g7522


From a6cb91464b5b09c0ff749e4b01048f93ce450275 Mon Sep 17 00:00:00 2001
From: Alan Brady
Date: Tue, 6 Sep 2016 18:05:07 -0700
Subject: i40e: fix deleting mac filters

There exists a bug in which deleting a mac filter does not actually
occur.  The driver reports that the filter has been deleted with no
error.  The problem occurs because the wrong cmd_flag is passed to the
firmware when deleting the filter.  The firmware reports an error back
to the driver but it is expressly ignored.

This fixes the bug by using the correct flag when deleting a filter.
Without this patch, deleted filters remain in firmware and function as
if they had not been deleted.

Change-ID: I5f22b874f3b83f457702f18f0d5602ca21ac40c3
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 60f082e10c3e..0841379a7517 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1315,7 +1315,7 @@ static void i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
 	element.vlan_tag = 0;
 	/* ...and some firmware does it this way. */
 	element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH |
-			I40E_AQC_MACVLAN_ADD_IGNORE_VLAN;
+			I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
 	i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
 }
 
@@ -1908,7 +1908,7 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
 			ether_addr_copy(del_list[num_del].mac_addr, f->macaddr);
 			if (f->vlan == I40E_VLAN_ANY) {
 				del_list[num_del].vlan_tag = 0;
-				cmd_flags |= I40E_AQC_MACVLAN_ADD_IGNORE_VLAN;
+				cmd_flags |= I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
 			} else {
 				del_list[num_del].vlan_tag =
 					cpu_to_le16((u16)(f->vlan));
-- 
cgit v1.2.3-55-g7522


From 2199254cb50a650934ef2d1c531ec6fdc0a826c5 Mon Sep 17 00:00:00 2001
From: Preethi Banala
Date: Tue, 6 Sep 2016 18:05:08 -0700
Subject: i40e: add encap csum VF offload flag

Add ENCAP_CSUM offload negotiation flag. Currently VF assumes checksum
offload for encapsulated packets is supported by default. Going forward,
this feature needs to be negotiated with PF before advertising to the
stack. Hence, we need a flag to control it.
This is in regards to prepping up for VF base mode functionality support.

Change-ID: Iaab1f25cc0abda5f2fbe3309092640f0e77d163e
Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl.h   | 1 +
 drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl.h
index c92a3bdee229..f861d3109d1a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl.h
@@ -163,6 +163,7 @@ struct i40e_virtchnl_vsi_resource {
 #define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING	0x00020000
 #define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2	0x00040000
 #define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF		0X00080000
+#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM	0X00100000
 
 struct i40e_virtchnl_vf_resource {
 	u16 num_vsis;
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h b/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h
index f04ce6cb70dc..bd691ad86673 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h
@@ -160,6 +160,7 @@ struct i40e_virtchnl_vsi_resource {
 #define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING	0x00020000
 #define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2	0x00040000
 #define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF		0X00080000
+#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM	0X00100000
 
 struct i40e_virtchnl_vf_resource {
 	u16 num_vsis;
-- 
cgit v1.2.3-55-g7522


From 234dc4e67611c11bb3990abced26cb75b8ef262a Mon Sep 17 00:00:00 2001
From: Jacob Keller
Date: Tue, 6 Sep 2016 18:05:09 -0700
Subject: i40e: cleanup ATR auto_disable_flags use

Some locations that disable ATR accidentally used the "full" disable by
disabling the flag in the standard flags field. This incorrectly forces
ATR off permanently instead of temporarily disabling it. In addition,
some code locations accidentally set the ATR flag enabled when they only
meant to clear the auto_disable_flags. This results in ignoring the
user's ethtool private flag settings.

Additionally, when disabling ATR via ethtool, we did not perform a flush
of the FD table. This results in the previously assigned ATR rules still
functioning which was not expected.

Cleanup all these areas so that automatic disable uses only the
auto_disable_flag. Fix the flush code so that we can trigger a flush
even when we've disabled ATR and SB support, as otherwise the flush
doesn't work. Fix ethtool setting to actually request a flush. Fix
NETIF_F_NTUPLE flag to only clear the auto_disable setting and not
enable the full feature.

Change-ID: Ib2486111f8031bd16943e9308757b276305c03b5
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c |  3 +++
 drivers/net/ethernet/intel/i40e/i40e_main.c    | 20 +++++++-------------
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    | 14 +++++++-------
 3 files changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index af28a8c2166b..5cad80f157fb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -3021,6 +3021,9 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 	} else {
 		pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
 		pf->auto_disable_flags |= I40E_FLAG_FD_ATR_ENABLED;
+
+		/* flush current ATR settings */
+		set_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
 	}
 
 	if ((flags & I40E_PRIV_FLAGS_VEB_STATS) &&
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 0841379a7517..e1a2c9a77a63 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5242,7 +5242,7 @@ static int i40e_up_complete(struct i40e_vsi *vsi)
 		/* reset fd counters */
 		pf->fd_add_err = pf->fd_atr_cnt = 0;
 		if (pf->fd_tcp_rule > 0) {
-			pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+			pf->auto_disable_flags |= I40E_FLAG_FD_ATR_ENABLED;
 			if (I40E_DEBUG_FD & pf->hw.debug_mask)
 				dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 exist\n");
 			pf->fd_tcp_rule = 0;
@@ -5976,9 +5976,6 @@ static void i40e_fdir_flush_and_replay(struct i40e_pf *pf)
 	int fd_room;
 	int reg;
 
-	if (!(pf->flags & (I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED)))
-		return;
-
 	if (!time_after(jiffies, pf->fd_flush_timestamp +
 				 (I40E_MIN_FD_FLUSH_INTERVAL * HZ)))
 		return;
@@ -5998,7 +5995,7 @@ static void i40e_fdir_flush_and_replay(struct i40e_pf *pf)
 	}
 
 	pf->fd_flush_timestamp = jiffies;
-	pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+	pf->auto_disable_flags |= I40E_FLAG_FD_ATR_ENABLED;
 	/* flush all filters */
 	wr32(&pf->hw, I40E_PFQF_CTL_1,
 	     I40E_PFQF_CTL_1_CLEARFDTABLE_MASK);
@@ -6018,7 +6015,7 @@ static void i40e_fdir_flush_and_replay(struct i40e_pf *pf)
 		/* replay sideband filters */
 		i40e_fdir_filter_restore(pf->vsi[pf->lan_vsi]);
 		if (!disable_atr)
-			pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
+			pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
 		clear_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
 		if (I40E_DEBUG_FD & pf->hw.debug_mask)
 			dev_info(&pf->pdev->dev, "FD Filter table flushed and FD-SB replayed.\n");
@@ -6052,9 +6049,6 @@ static void i40e_fdir_reinit_subtask(struct i40e_pf *pf)
 	if (test_bit(__I40E_DOWN, &pf->state))
 		return;
 
-	if (!(pf->flags & (I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED)))
-		return;
-
 	if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
 		i40e_fdir_flush_and_replay(pf);
 
@@ -8682,13 +8676,13 @@ bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features)
 		/* reset fd counters */
 		pf->fd_add_err = pf->fd_atr_cnt = pf->fd_tcp_rule = 0;
 		pf->fdir_pf_active_filters = 0;
-		pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
-		if (I40E_DEBUG_FD & pf->hw.debug_mask)
-			dev_info(&pf->pdev->dev, "ATR re-enabled.\n");
 		/* if ATR was auto disabled it can be re-enabled. */
 		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
-		    (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED))
+		    (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED)) {
 			pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+			if (I40E_DEBUG_FD & pf->hw.debug_mask)
+				dev_info(&pf->pdev->dev, "ATR re-enabled.\n");
+		}
 	}
 	return need_reset;
 }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index bf7bb7c3f227..7ada05e7776f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -282,18 +282,18 @@ static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
 
 	if (add) {
 		pf->fd_tcp_rule++;
-		if (pf->flags & I40E_FLAG_FD_ATR_ENABLED) {
-			if (I40E_DEBUG_FD & pf->hw.debug_mask)
-				dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
-			pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
-		}
+		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
+		    I40E_DEBUG_FD & pf->hw.debug_mask)
+			dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
+		pf->auto_disable_flags |= I40E_FLAG_FD_ATR_ENABLED;
 	} else {
 		pf->fd_tcp_rule = (pf->fd_tcp_rule > 0) ?
 				  (pf->fd_tcp_rule - 1) : 0;
 		if (pf->fd_tcp_rule == 0) {
-			pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
-			if (I40E_DEBUG_FD & pf->hw.debug_mask)
+			if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
+			    I40E_DEBUG_FD & pf->hw.debug_mask)
 				dev_info(&pf->pdev->dev, "ATR re-enabled due to no sideband TCP/IPv4 rules\n");
+			pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
 		}
 	}
 
-- 
cgit v1.2.3-55-g7522


From a3417d287fb02e7bd24c6b1068fe6f9b52a259a6 Mon Sep 17 00:00:00 2001
From: Jacob Keller
Date: Tue, 6 Sep 2016 18:05:10 -0700
Subject: i40e: check conflicting ntuple/sideband rules when re-enabling ATR

In i40e_fdir_check_and_reenable(), the driver performs some checks to
determine whether it is safe to re-enable FD Sideband and FD ATR
support. The current check will only determine if there is available
space in the flow director table. However, this ignores the fact that
ATR should be disabled when there are TCP/IPv4 sideband rules in effect.
Add the missing check, and update the info message printed when
I40E_DEBUG_FD is enabled.

Change-ID: Ibb9c63e5be95d63c53a498fdd5dbf69f54a00e08
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e1a2c9a77a63..89b0418a6c2e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5939,13 +5939,17 @@ void i40e_fdir_check_and_reenable(struct i40e_pf *pf)
 				dev_info(&pf->pdev->dev, "FD Sideband/ntuple is being enabled since we have space in the table now\n");
 		}
 	}
-	/* Wait for some more space to be available to turn on ATR */
+
+	/* Wait for some more space to be available to turn on ATR. We also
+	 * must check that no existing ntuple rules for TCP are in effect
+	 */
 	if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM * 2)) {
 		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
-		    (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED)) {
+		    (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED) &&
+		    (pf->fd_tcp_rule == 0)) {
 			pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
 			if (I40E_DEBUG_FD & pf->hw.debug_mask)
-				dev_info(&pf->pdev->dev, "ATR is being enabled since we have space in the table now\n");
+				dev_info(&pf->pdev->dev, "ATR is being enabled since we have space in the table and there are no conflicting ntuple rules\n");
 		}
 	}
 
-- 
cgit v1.2.3-55-g7522


From ac9c5c6d8c17fa105878442ac663f0e9abe3cff5 Mon Sep 17 00:00:00 2001
From: Henry Tieman
Date: Tue, 6 Sep 2016 18:05:11 -0700
Subject: i40e: removing unreachable code

The return value from i40e_shutdown_adminq() is always 0
(I40E_SUCCESS). So, the test for non-0 will never be true. Cleanup
by removing the test and debug print statement.

Change-ID: Ie51e8e37515c3e3a6a9ff26fa951d0e5e24343c1
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 89b0418a6c2e..e626761b8c94 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11333,11 +11333,7 @@ static void i40e_remove(struct pci_dev *pdev)
 	}
 
 	/* shutdown the adminq */
-	ret_code = i40e_shutdown_adminq(hw);
-	if (ret_code)
-		dev_warn(&pdev->dev,
-			 "Failed to destroy the Admin Queue resources: %d\n",
-			 ret_code);
+	i40e_shutdown_adminq(hw);
 
 	/* destroy the locks only once, here */
 	mutex_destroy(&hw->aq.arq_mutex);
-- 
cgit v1.2.3-55-g7522


From fa90efa59dabbaac24f1ad2e6535e6daa2845257 Mon Sep 17 00:00:00 2001
From: Bimmy Pujari
Date: Tue, 6 Sep 2016 18:05:12 -0700
Subject: i40e/i40evf: Changed version to 1.6.16

Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 2 +-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e626761b8c94..b434d07d98cd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -41,7 +41,7 @@ static const char i40e_driver_string[] =
 
 #define DRV_VERSION_MAJOR 1
 #define DRV_VERSION_MINOR 6
-#define DRV_VERSION_BUILD 12
+#define DRV_VERSION_BUILD 16
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 99833f3ea34e..064419e48f21 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -38,7 +38,7 @@ static const char i40evf_driver_string[] =
 
 #define DRV_VERSION_MAJOR 1
 #define DRV_VERSION_MINOR 6
-#define DRV_VERSION_BUILD 12
+#define DRV_VERSION_BUILD 16
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD) \
-- 
cgit v1.2.3-55-g7522


From 7ac4b5c6fd351be8f849f687e290ca9724acfd33 Mon Sep 17 00:00:00 2001
From: Akeem Abodunrin
Date: Mon, 12 Sep 2016 14:18:37 -0700
Subject: i40e: Increase minimum number of allocated VSI

This patch increases minimum number of allocated VSIs, so as to resolve
failure adding VSI for VF when 64-VFs assigned to a PF. The driver
supports up to 128 VFs per device, users can decide to enable up to
64-VFs on a single PF, especially 2 X 40 devices. In that scenario, with
VMDq co-existence, there would be starvation of VSIs - with this patch,
supported features would have enough VSIs for configuration now.

Change-ID: If084f4cd823667af8fe7fdc11489c705b32039d5
Signed-off-by: Akeem Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 30aaee42f648..6b22df62f018 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -74,7 +74,7 @@
 #define I40E_MIN_NUM_DESCRIPTORS	64
 #define I40E_MIN_MSIX			2
 #define I40E_DEFAULT_NUM_VMDQ_VSI	8 /* max 256 VSIs */
-#define I40E_MIN_VSI_ALLOC		51 /* LAN, ATR, FCOE, 32 VF, 16 VMDQ */
+#define I40E_MIN_VSI_ALLOC		83 /* LAN, ATR, FCOE, 64 VF */
 /* max 16 qps */
 #define i40e_default_queues_per_vmdq(pf) \
 		(((pf)->flags & I40E_FLAG_RSS_AQ_CAPABLE) ? 4 : 1)
-- 
cgit v1.2.3-55-g7522


From f19a973f46e85d4394cadb90fa7717f7ec98197a Mon Sep 17 00:00:00 2001
From: Mitch Williams
Date: Mon, 12 Sep 2016 14:18:38 -0700
Subject: i40evf: enable adaptive interrupt throttling

All of the code to support adaptive interrupt throttling is already in
the interrupt handler, it just needs to be enabled. Fill out the data
structures properly to make it happen. Single-flow traffic tests may
show slightly lower throughput, but interrupts per second will drop by
about 75%.

Change-ID: I9cd7d42c025b906bf1bb85c6aeb6112684aa6471
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 064419e48f21..302c9743ef44 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -370,6 +370,8 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx)
 {
 	struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx];
 	struct i40e_ring *rx_ring = &adapter->rx_rings[r_idx];
+	struct i40e_vsi *vsi = &adapter->vsi;
+	struct i40e_hw *hw = &adapter->hw;
 
 	rx_ring->q_vector = q_vector;
 	rx_ring->next = q_vector->rx.ring;
@@ -377,7 +379,10 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx)
 	q_vector->rx.ring = rx_ring;
 	q_vector->rx.count++;
 	q_vector->rx.latency_range = I40E_LOW_LATENCY;
+	q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
+	q_vector->ring_mask |= BIT(r_idx);
 	q_vector->itr_countdown = ITR_COUNTDOWN_START;
+	wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, v_idx - 1), q_vector->rx.itr);
 }
 
 /**
@@ -391,6 +396,8 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx)
 {
 	struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx];
 	struct i40e_ring *tx_ring = &adapter->tx_rings[t_idx];
+	struct i40e_vsi *vsi = &adapter->vsi;
+	struct i40e_hw *hw = &adapter->hw;
 
 	tx_ring->q_vector = q_vector;
 	tx_ring->next = q_vector->tx.ring;
@@ -398,9 +405,10 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx)
 	q_vector->tx.ring = tx_ring;
 	q_vector->tx.count++;
 	q_vector->tx.latency_range = I40E_LOW_LATENCY;
+	q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
 	q_vector->itr_countdown = ITR_COUNTDOWN_START;
 	q_vector->num_ringpairs++;
-	q_vector->ring_mask |= BIT(t_idx);
+	wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, v_idx - 1), q_vector->tx.itr);
 }
 
 /**
@@ -2269,10 +2277,8 @@ int i40evf_process_config(struct i40evf_adapter *adapter)
 	adapter->vsi.back = adapter;
 	adapter->vsi.base_vector = 1;
 	adapter->vsi.work_limit = I40E_DEFAULT_IRQ_WORK;
-	adapter->vsi.rx_itr_setting = (I40E_ITR_DYNAMIC |
-				       ITR_REG_TO_USEC(I40E_ITR_RX_DEF));
-	adapter->vsi.tx_itr_setting = (I40E_ITR_DYNAMIC |
-				       ITR_REG_TO_USEC(I40E_ITR_TX_DEF));
+	adapter->vsi.rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF);
+	adapter->vsi.tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF);
 	vsi->netdev = adapter->netdev;
 	vsi->qs_handle = adapter->vsi_res->qset_handle;
 	if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF) {
-- 
cgit v1.2.3-55-g7522


From 64bfd68eaecdce7b86e179fe39662340c8aed20d Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Mon, 12 Sep 2016 14:18:39 -0700
Subject: i40e: Fix Flow Director raw_buf cleanup

The Tx cleanup flow was incorrectly assuming it could check for the flow
director bits after it had unmapped the buffer.  However in this case it
results in us trying to free a raw_buf as though it is an sk_buff.

To fix this I am moving up the flag test for the FD_SB bit so that when
find a non-NULL skb or raw_buf value we then check the flag and use the
appropriate call to free the buffer.

Change-ID: I6284034ba1ea87c9922e56f6eb3181f7f09bddde
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 8 ++++----
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 7ada05e7776f..a2077bedac93 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -532,7 +532,10 @@ static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
 					    struct i40e_tx_buffer *tx_buffer)
 {
 	if (tx_buffer->skb) {
-		dev_kfree_skb_any(tx_buffer->skb);
+		if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
+			kfree(tx_buffer->raw_buf);
+		else
+			dev_kfree_skb_any(tx_buffer->skb);
 		if (dma_unmap_len(tx_buffer, len))
 			dma_unmap_single(ring->dev,
 					 dma_unmap_addr(tx_buffer, dma),
@@ -545,9 +548,6 @@ static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
 			       DMA_TO_DEVICE);
 	}
 
-	if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
-		kfree(tx_buffer->raw_buf);
-
 	tx_buffer->next_to_watch = NULL;
 	tx_buffer->skb = NULL;
 	dma_unmap_len_set(tx_buffer, len, 0);
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index e3427ebd5b84..cb6b13098699 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -51,7 +51,10 @@ static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
 					    struct i40e_tx_buffer *tx_buffer)
 {
 	if (tx_buffer->skb) {
-		dev_kfree_skb_any(tx_buffer->skb);
+		if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
+			kfree(tx_buffer->raw_buf);
+		else
+			dev_kfree_skb_any(tx_buffer->skb);
 		if (dma_unmap_len(tx_buffer, len))
 			dma_unmap_single(ring->dev,
 					 dma_unmap_addr(tx_buffer, dma),
@@ -64,9 +67,6 @@ static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
 			       DMA_TO_DEVICE);
 	}
 
-	if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
-		kfree(tx_buffer->raw_buf);
-
 	tx_buffer->next_to_watch = NULL;
 	tx_buffer->skb = NULL;
 	dma_unmap_len_set(tx_buffer, len, 0);
-- 
cgit v1.2.3-55-g7522


From e486bdfd7c491e997f29fcdf6a4216861ab1d06a Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Mon, 12 Sep 2016 14:18:40 -0700
Subject: i40e/i40evf: Add txring_txq function to match fm10k and ixgbe

This patch adds a txring_txq function which allows us to convert a
i40e_ring/i40evf_ring to a netdev_tx_queue structure.  This way we
can avoid having to make a multi-line function call for all the spots
that need access to this.

Change-ID: Ic063b71d8b92ea406d2c32e798c8e2b02809d65b
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 17 ++++++-----------
 drivers/net/ethernet/intel/i40e/i40e_txrx.h   |  9 +++++++++
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 17 ++++++-----------
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h |  9 +++++++++
 4 files changed, 30 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index a2077bedac93..6e0a7acf17a2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -584,8 +584,7 @@ void i40e_clean_tx_ring(struct i40e_ring *tx_ring)
 		return;
 
 	/* cleanup Tx queue statistics */
-	netdev_tx_reset_queue(netdev_get_tx_queue(tx_ring->netdev,
-						  tx_ring->queue_index));
+	netdev_tx_reset_queue(txring_txq(tx_ring));
 }
 
 /**
@@ -754,8 +753,8 @@ static bool i40e_clean_tx_irq(struct i40e_vsi *vsi,
 			tx_ring->arm_wb = true;
 	}
 
-	netdev_tx_completed_queue(netdev_get_tx_queue(tx_ring->netdev,
-						      tx_ring->queue_index),
+	/* notify netdev of completed buffers */
+	netdev_tx_completed_queue(txring_txq(tx_ring),
 				  total_packets, total_bytes);
 
 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
@@ -2784,9 +2783,7 @@ static inline void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 	tx_ring->next_to_use = i;
 
-	netdev_tx_sent_queue(netdev_get_tx_queue(tx_ring->netdev,
-						 tx_ring->queue_index),
-						 first->bytecount);
+	netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
 	i40e_maybe_stop_tx(tx_ring, DESC_NEEDED);
 
 	/* Algorithm to optimize tail and RS bit setting:
@@ -2811,13 +2808,11 @@ static inline void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	 * trigger a force WB.
 	 */
 	if (skb->xmit_more  &&
-	    !netif_xmit_stopped(netdev_get_tx_queue(tx_ring->netdev,
-						    tx_ring->queue_index))) {
+	    !netif_xmit_stopped(txring_txq(tx_ring))) {
 		tx_ring->flags |= I40E_TXR_FLAGS_LAST_XMIT_MORE_SET;
 		tail_bump = false;
 	} else if (!skb->xmit_more &&
-		   !netif_xmit_stopped(netdev_get_tx_queue(tx_ring->netdev,
-						       tx_ring->queue_index)) &&
+		   !netif_xmit_stopped(txring_txq(tx_ring)) &&
 		   (!(tx_ring->flags & I40E_TXR_FLAGS_LAST_XMIT_MORE_SET)) &&
 		   (tx_ring->packet_stride < WB_STRIDE) &&
 		   (desc_count < WB_STRIDE)) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index b78c810d1835..508840585645 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -463,4 +463,13 @@ static inline bool i40e_rx_is_fcoe(u16 ptype)
 	return (ptype >= I40E_RX_PTYPE_L2_FCOE_PAY3) &&
 	       (ptype <= I40E_RX_PTYPE_L2_FCOE_VFT_FCOTHER);
 }
+
+/**
+ * txring_txq - Find the netdev Tx ring based on the i40e Tx ring
+ * @ring: Tx ring to find the netdev equivalent of
+ **/
+static inline struct netdev_queue *txring_txq(const struct i40e_ring *ring)
+{
+	return netdev_get_tx_queue(ring->netdev, ring->queue_index);
+}
 #endif /* _I40E_TXRX_H_ */
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index cb6b13098699..d4c6a767be94 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -103,8 +103,7 @@ void i40evf_clean_tx_ring(struct i40e_ring *tx_ring)
 		return;
 
 	/* cleanup Tx queue statistics */
-	netdev_tx_reset_queue(netdev_get_tx_queue(tx_ring->netdev,
-						  tx_ring->queue_index));
+	netdev_tx_reset_queue(txring_txq(tx_ring));
 }
 
 /**
@@ -273,8 +272,8 @@ static bool i40e_clean_tx_irq(struct i40e_vsi *vsi,
 			tx_ring->arm_wb = true;
 	}
 
-	netdev_tx_completed_queue(netdev_get_tx_queue(tx_ring->netdev,
-						      tx_ring->queue_index),
+	/* notify netdev of completed buffers */
+	netdev_tx_completed_queue(txring_txq(tx_ring),
 				  total_packets, total_bytes);
 
 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
@@ -2012,9 +2011,7 @@ static inline void i40evf_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 	tx_ring->next_to_use = i;
 
-	netdev_tx_sent_queue(netdev_get_tx_queue(tx_ring->netdev,
-						 tx_ring->queue_index),
-						 first->bytecount);
+	netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
 	i40e_maybe_stop_tx(tx_ring, DESC_NEEDED);
 
 	/* Algorithm to optimize tail and RS bit setting:
@@ -2039,13 +2036,11 @@ static inline void i40evf_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	 * trigger a force WB.
 	 */
 	if (skb->xmit_more  &&
-	    !netif_xmit_stopped(netdev_get_tx_queue(tx_ring->netdev,
-						    tx_ring->queue_index))) {
+	    !netif_xmit_stopped(txring_txq(tx_ring))) {
 		tx_ring->flags |= I40E_TXR_FLAGS_LAST_XMIT_MORE_SET;
 		tail_bump = false;
 	} else if (!skb->xmit_more &&
-		   !netif_xmit_stopped(netdev_get_tx_queue(tx_ring->netdev,
-						       tx_ring->queue_index)) &&
+		   !netif_xmit_stopped(txring_txq(tx_ring)) &&
 		   (!(tx_ring->flags & I40E_TXR_FLAGS_LAST_XMIT_MORE_SET)) &&
 		   (tx_ring->packet_stride < WB_STRIDE) &&
 		   (desc_count < WB_STRIDE)) {
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index 0112277e5882..84e561cc0166 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -445,4 +445,13 @@ static inline bool i40e_rx_is_fcoe(u16 ptype)
 	return (ptype >= I40E_RX_PTYPE_L2_FCOE_PAY3) &&
 	       (ptype <= I40E_RX_PTYPE_L2_FCOE_VFT_FCOTHER);
 }
+
+/**
+ * txring_txq - Find the netdev Tx ring based on the i40e Tx ring
+ * @ring: Tx ring to find the netdev equivalent of
+ **/
+static inline struct netdev_queue *txring_txq(const struct i40e_ring *ring)
+{
+	return netdev_get_tx_queue(ring->netdev, ring->queue_index);
+}
 #endif /* _I40E_TXRX_H_ */
-- 
cgit v1.2.3-55-g7522


From 5e02f2837349b399e48fd2a5e5149c9ee9c27cdd Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Mon, 12 Sep 2016 14:18:41 -0700
Subject: i40e: Split Flow Director descriptor config into separate function

In an effort to improve code readability I am splitting the Flow Director
filter configuration out into a separate function like we have done for the
standard xmit path.  The general idea is to provide a single block of code
that translates the flow specification into a proper Flow Director
descriptor.

Change-ID: Id355ad8030c4e6c72c57504fa09de60c976a8ffe
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 115 ++++++++++++++++------------
 1 file changed, 64 insertions(+), 51 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 6e0a7acf17a2..ef9b8d7f85d4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -40,6 +40,69 @@ static inline __le64 build_ctob(u32 td_cmd, u32 td_offset, unsigned int size,
 }
 
 #define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
+/**
+ * i40e_fdir - Generate a Flow Director descriptor based on fdata
+ * @tx_ring: Tx ring to send buffer on
+ * @fdata: Flow director filter data
+ * @add: Indicate if we are adding a rule or deleting one
+ *
+ **/
+static void i40e_fdir(struct i40e_ring *tx_ring,
+		      struct i40e_fdir_filter *fdata, bool add)
+{
+	struct i40e_filter_program_desc *fdir_desc;
+	struct i40e_pf *pf = tx_ring->vsi->back;
+	u32 flex_ptype, dtype_cmd;
+	u16 i;
+
+	/* grab the next descriptor */
+	i = tx_ring->next_to_use;
+	fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
+
+	i++;
+	tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+
+	flex_ptype = I40E_TXD_FLTR_QW0_QINDEX_MASK &
+		     (fdata->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT);
+
+	flex_ptype |= I40E_TXD_FLTR_QW0_FLEXOFF_MASK &
+		      (fdata->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT);
+
+	flex_ptype |= I40E_TXD_FLTR_QW0_PCTYPE_MASK &
+		      (fdata->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT);
+
+	/* Use LAN VSI Id if not programmed by user */
+	flex_ptype |= I40E_TXD_FLTR_QW0_DEST_VSI_MASK &
+		      ((u32)(fdata->dest_vsi ? : pf->vsi[pf->lan_vsi]->id) <<
+		       I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT);
+
+	dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;
+
+	dtype_cmd |= add ?
+		     I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
+		     I40E_TXD_FLTR_QW1_PCMD_SHIFT :
+		     I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
+		     I40E_TXD_FLTR_QW1_PCMD_SHIFT;
+
+	dtype_cmd |= I40E_TXD_FLTR_QW1_DEST_MASK &
+		     (fdata->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT);
+
+	dtype_cmd |= I40E_TXD_FLTR_QW1_FD_STATUS_MASK &
+		     (fdata->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT);
+
+	if (fdata->cnt_index) {
+		dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
+		dtype_cmd |= I40E_TXD_FLTR_QW1_CNTINDEX_MASK &
+			     ((u32)fdata->cnt_index <<
+			      I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT);
+	}
+
+	fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
+	fdir_desc->rsvd = cpu_to_le32(0);
+	fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
+	fdir_desc->fd_id = cpu_to_le32(fdata->fd_id);
+}
+
 #define I40E_FD_CLEAN_DELAY 10
 /**
  * i40e_program_fdir_filter - Program a Flow Director filter
@@ -51,11 +114,9 @@ static inline __le64 build_ctob(u32 td_cmd, u32 td_offset, unsigned int size,
 int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, u8 *raw_packet,
 			     struct i40e_pf *pf, bool add)
 {
-	struct i40e_filter_program_desc *fdir_desc;
 	struct i40e_tx_buffer *tx_buf, *first;
 	struct i40e_tx_desc *tx_desc;
 	struct i40e_ring *tx_ring;
-	unsigned int fpt, dcc;
 	struct i40e_vsi *vsi;
 	struct device *dev;
 	dma_addr_t dma;
@@ -92,56 +153,8 @@ int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, u8 *raw_packet,
 
 	/* grab the next descriptor */
 	i = tx_ring->next_to_use;
-	fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
 	first = &tx_ring->tx_bi[i];
-	memset(first, 0, sizeof(struct i40e_tx_buffer));
-
-	tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0;
-
-	fpt = (fdir_data->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) &
-	      I40E_TXD_FLTR_QW0_QINDEX_MASK;
-
-	fpt |= (fdir_data->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT) &
-	       I40E_TXD_FLTR_QW0_FLEXOFF_MASK;
-
-	fpt |= (fdir_data->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) &
-	       I40E_TXD_FLTR_QW0_PCTYPE_MASK;
-
-	/* Use LAN VSI Id if not programmed by user */
-	if (fdir_data->dest_vsi == 0)
-		fpt |= (pf->vsi[pf->lan_vsi]->id) <<
-		       I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT;
-	else
-		fpt |= ((u32)fdir_data->dest_vsi <<
-			I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT) &
-		       I40E_TXD_FLTR_QW0_DEST_VSI_MASK;
-
-	dcc = I40E_TX_DESC_DTYPE_FILTER_PROG;
-
-	if (add)
-		dcc |= I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
-		       I40E_TXD_FLTR_QW1_PCMD_SHIFT;
-	else
-		dcc |= I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
-		       I40E_TXD_FLTR_QW1_PCMD_SHIFT;
-
-	dcc |= (fdir_data->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT) &
-	       I40E_TXD_FLTR_QW1_DEST_MASK;
-
-	dcc |= (fdir_data->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT) &
-	       I40E_TXD_FLTR_QW1_FD_STATUS_MASK;
-
-	if (fdir_data->cnt_index != 0) {
-		dcc |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
-		dcc |= ((u32)fdir_data->cnt_index <<
-			I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
-			I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
-	}
-
-	fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(fpt);
-	fdir_desc->rsvd = cpu_to_le32(0);
-	fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dcc);
-	fdir_desc->fd_id = cpu_to_le32(fdir_data->fd_id);
+	i40e_fdir(tx_ring, fdir_data, add);
 
 	/* Now program a dummy descriptor */
 	i = tx_ring->next_to_use;
-- 
cgit v1.2.3-55-g7522


From 1eb846ac90b956e52f4269d80f13cfbe1df6850b Mon Sep 17 00:00:00 2001
From: Alexander Duyck
Date: Mon, 12 Sep 2016 14:18:42 -0700
Subject: i40e: Strip out debugfs hook for Flow Director filter programming

This  interface was only ever meant for debug only. Since it is not
supposed to be here we are removing it.

Change-ID: Id771a1e5e7d3e2b4b7f56591b61fb48c921e1d04
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |  2 -
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 80 --------------------------
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    |  5 +-
 3 files changed, 3 insertions(+), 84 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 6b22df62f018..2030d7c1dc94 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -710,8 +710,6 @@ struct rtnl_link_stats64 *i40e_get_vsi_stats_struct(struct i40e_vsi *vsi);
 int i40e_fetch_switch_configuration(struct i40e_pf *pf,
 				    bool printconfig);
 
-int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, u8 *raw_packet,
-			     struct i40e_pf *pf, bool add);
 int i40e_add_del_fdir(struct i40e_vsi *vsi,
 		      struct i40e_fdir_filter *input, bool add);
 void i40e_fdir_check_and_reenable(struct i40e_pf *pf);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 8555f04002da..0c1875b5b16d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1430,84 +1430,6 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		buff = NULL;
 		kfree(desc);
 		desc = NULL;
-	} else if ((strncmp(cmd_buf, "add fd_filter", 13) == 0) ||
-		   (strncmp(cmd_buf, "rem fd_filter", 13) == 0)) {
-		struct i40e_fdir_filter fd_data;
-		u16 packet_len, i, j = 0;
-		char *asc_packet;
-		u8 *raw_packet;
-		bool add = false;
-		int ret;
-
-		if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
-			goto command_write_done;
-
-		if (strncmp(cmd_buf, "add", 3) == 0)
-			add = true;
-
-		if (add && (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED))
-			goto command_write_done;
-
-		asc_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE,
-				     GFP_KERNEL);
-		if (!asc_packet)
-			goto command_write_done;
-
-		raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE,
-				     GFP_KERNEL);
-
-		if (!raw_packet) {
-			kfree(asc_packet);
-			asc_packet = NULL;
-			goto command_write_done;
-		}
-
-		cnt = sscanf(&cmd_buf[13],
-			     "%hx %2hhx %2hhx %hx %2hhx %2hhx %hx %x %hd %511s",
-			     &fd_data.q_index,
-			     &fd_data.flex_off, &fd_data.pctype,
-			     &fd_data.dest_vsi, &fd_data.dest_ctl,
-			     &fd_data.fd_status, &fd_data.cnt_index,
-			     &fd_data.fd_id, &packet_len, asc_packet);
-		if (cnt != 10) {
-			dev_info(&pf->pdev->dev,
-				 "program fd_filter: bad command string, cnt=%d\n",
-				 cnt);
-			kfree(asc_packet);
-			asc_packet = NULL;
-			kfree(raw_packet);
-			goto command_write_done;
-		}
-
-		/* fix packet length if user entered 0 */
-		if (packet_len == 0)
-			packet_len = I40E_FDIR_MAX_RAW_PACKET_SIZE;
-
-		/* make sure to check the max as well */
-		packet_len = min_t(u16,
-				   packet_len, I40E_FDIR_MAX_RAW_PACKET_SIZE);
-
-		for (i = 0; i < packet_len; i++) {
-			cnt = sscanf(&asc_packet[j], "%2hhx ", &raw_packet[i]);
-			if (!cnt)
-				break;
-			j += 3;
-		}
-		dev_info(&pf->pdev->dev, "FD raw packet dump\n");
-		print_hex_dump(KERN_INFO, "FD raw packet: ",
-			       DUMP_PREFIX_OFFSET, 16, 1,
-			       raw_packet, packet_len, true);
-		ret = i40e_program_fdir_filter(&fd_data, raw_packet, pf, add);
-		if (!ret) {
-			dev_info(&pf->pdev->dev, "Filter command send Status : Success\n");
-		} else {
-			dev_info(&pf->pdev->dev,
-				 "Filter command send failed %d\n", ret);
-		}
-		kfree(raw_packet);
-		raw_packet = NULL;
-		kfree(asc_packet);
-		asc_packet = NULL;
 	} else if (strncmp(cmd_buf, "fd current cnt", 14) == 0) {
 		dev_info(&pf->pdev->dev, "FD current total filter count for this interface: %d\n",
 			 i40e_get_current_fd_count(pf));
@@ -1732,8 +1654,6 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		dev_info(&pf->pdev->dev, "  globr\n");
 		dev_info(&pf->pdev->dev, "  send aq_cmd <flags> <opcode> <datalen> <retval> <cookie_h> <cookie_l> <param0> <param1> <param2> <param3>\n");
 		dev_info(&pf->pdev->dev, "  send indirect aq_cmd <flags> <opcode> <datalen> <retval> <cookie_h> <cookie_l> <param0> <param1> <param2> <param3> <buffer_len>\n");
-		dev_info(&pf->pdev->dev, "  add fd_filter <dest q_index> <flex_off> <pctype> <dest_vsi> <dest_ctl> <fd_status> <cnt_index> <fd_id> <packet_len> <packet>\n");
-		dev_info(&pf->pdev->dev, "  rem fd_filter <dest q_index> <flex_off> <pctype> <dest_vsi> <dest_ctl> <fd_status> <cnt_index> <fd_id> <packet_len> <packet>\n");
 		dev_info(&pf->pdev->dev, "  fd current cnt");
 		dev_info(&pf->pdev->dev, "  lldp start\n");
 		dev_info(&pf->pdev->dev, "  lldp stop\n");
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index ef9b8d7f85d4..5237c491af89 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -111,8 +111,9 @@ static void i40e_fdir(struct i40e_ring *tx_ring,
  * @pf: The PF pointer
  * @add: True for add/update, False for remove
  **/
-int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, u8 *raw_packet,
-			     struct i40e_pf *pf, bool add)
+static int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data,
+				    u8 *raw_packet, struct i40e_pf *pf,
+				    bool add)
 {
 	struct i40e_tx_buffer *tx_buf, *first;
 	struct i40e_tx_desc *tx_desc;
-- 
cgit v1.2.3-55-g7522


From a4fa59cc5bb028ebb8048e8dcb6f92b2a1ea07f6 Mon Sep 17 00:00:00 2001
From: Mitch Williams
Date: Mon, 12 Sep 2016 14:18:43 -0700
Subject: i40e: don't configure zero-size RSS table

In some rare cases, we might get a VSI with no queues. In this case, we
cannot configure RSS on this VSI as it will try to divide by zero when
configuring the lookup table.

Change-ID: I6ae173a7dd3481a081e079eb10eb80275de2adb0
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index b434d07d98cd..8176596932be 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8282,6 +8282,8 @@ static int i40e_pf_config_rss(struct i40e_pf *pf)
 	if (!vsi->rss_size)
 		vsi->rss_size = min_t(int, pf->alloc_rss_size,
 				      vsi->num_queue_pairs);
+	if (!vsi->rss_size)
+		return -EINVAL;
 
 	lut = kzalloc(vsi->rss_table_size, GFP_KERNEL);
 	if (!lut)
-- 
cgit v1.2.3-55-g7522


From 65e87c0398f542d5bd51cfd8a29b9dfd246b6a1c Mon Sep 17 00:00:00 2001
From: Jacob Keller
Date: Mon, 12 Sep 2016 14:18:44 -0700
Subject: i40evf: support queue-specific settings for interrupt moderation

In commit a75e8005d506f3 ("i40e: queue-specific settings for interrupt
moderation") the i40e driver gained support for setting interrupt
moderation values per queue. This patch adds support for this feature
to the i40evf driver as well. In addition, a few changes are made to
the i40e implementation to add function header documentation comments,
as well.

This behaves in a similar fashion to the implementation in i40e. Thus,
requesting the moderation value when no queue is provided will report
queue 0 value, while setting the value without a queue will set all
queues at once.

Change-ID: I1f310a57c8e6c84a8524c178d44d1b7a6d3a848e
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     |  72 ++++++-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  21 ++-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c      |  26 ++-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h      |   8 +
 drivers/net/ethernet/intel/i40evf/i40evf.h         |   7 -
 drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c | 206 ++++++++++++++++-----
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    |  10 +-
 7 files changed, 280 insertions(+), 70 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 5cad80f157fb..92bc8846f1ba 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1970,11 +1970,22 @@ static int i40e_set_phys_id(struct net_device *netdev,
  * 125us (8000 interrupts per second) == ITR(62)
  */
 
+/**
+ * __i40e_get_coalesce - get per-queue coalesce settings
+ * @netdev: the netdev to check
+ * @ec: ethtool coalesce data structure
+ * @queue: which queue to pick
+ *
+ * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs
+ * are per queue. If queue is <0 then we default to queue 0 as the
+ * representative value.
+ **/
 static int __i40e_get_coalesce(struct net_device *netdev,
 			       struct ethtool_coalesce *ec,
 			       int queue)
 {
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
+	struct i40e_ring *rx_ring, *tx_ring;
 	struct i40e_vsi *vsi = np->vsi;
 
 	ec->tx_max_coalesced_frames_irq = vsi->work_limit;
@@ -1989,14 +2000,18 @@ static int __i40e_get_coalesce(struct net_device *netdev,
 		return -EINVAL;
 	}
 
-	if (ITR_IS_DYNAMIC(vsi->rx_rings[queue]->rx_itr_setting))
+	rx_ring = vsi->rx_rings[queue];
+	tx_ring = vsi->tx_rings[queue];
+
+	if (ITR_IS_DYNAMIC(rx_ring->rx_itr_setting))
 		ec->use_adaptive_rx_coalesce = 1;
 
-	if (ITR_IS_DYNAMIC(vsi->tx_rings[queue]->tx_itr_setting))
+	if (ITR_IS_DYNAMIC(tx_ring->tx_itr_setting))
 		ec->use_adaptive_tx_coalesce = 1;
 
-	ec->rx_coalesce_usecs = vsi->rx_rings[queue]->rx_itr_setting & ~I40E_ITR_DYNAMIC;
-	ec->tx_coalesce_usecs = vsi->tx_rings[queue]->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+	ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC;
+	ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+
 
 	/* we use the _usecs_high to store/set the interrupt rate limit
 	 * that the hardware supports, that almost but not quite
@@ -2010,18 +2025,44 @@ static int __i40e_get_coalesce(struct net_device *netdev,
 	return 0;
 }
 
+/**
+ * i40e_get_coalesce - get a netdev's coalesce settings
+ * @netdev: the netdev to check
+ * @ec: ethtool coalesce data structure
+ *
+ * Gets the coalesce settings for a particular netdev. Note that if user has
+ * modified per-queue settings, this only guarantees to represent queue 0. See
+ * __i40e_get_coalesce for more details.
+ **/
 static int i40e_get_coalesce(struct net_device *netdev,
 			     struct ethtool_coalesce *ec)
 {
 	return __i40e_get_coalesce(netdev, ec, -1);
 }
 
+/**
+ * i40e_get_per_queue_coalesce - gets coalesce settings for particular queue
+ * @netdev: netdev structure
+ * @ec: ethtool's coalesce settings
+ * @queue: the particular queue to read
+ *
+ * Will read a specific queue's coalesce settings
+ **/
 static int i40e_get_per_queue_coalesce(struct net_device *netdev, u32 queue,
 				       struct ethtool_coalesce *ec)
 {
 	return __i40e_get_coalesce(netdev, ec, queue);
 }
 
+/**
+ * i40e_set_itr_per_queue - set ITR values for specific queue
+ * @vsi: the VSI to set values for
+ * @ec: coalesce settings from ethtool
+ * @queue: the queue to modify
+ *
+ * Change the ITR settings for a specific queue.
+ **/
+
 static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
 				   struct ethtool_coalesce *ec,
 				   int queue)
@@ -2060,6 +2101,14 @@ static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
 	i40e_flush(hw);
 }
 
+/**
+ * __i40e_set_coalesce - set coalesce settings for particular queue
+ * @netdev: the netdev to change
+ * @ec: ethtool coalesce settings
+ * @queue: the queue to change
+ *
+ * Sets the coalesce settings for a particular queue.
+ **/
 static int __i40e_set_coalesce(struct net_device *netdev,
 			       struct ethtool_coalesce *ec,
 			       int queue)
@@ -2120,12 +2169,27 @@ static int __i40e_set_coalesce(struct net_device *netdev,
 	return 0;
 }
 
+/**
+ * i40e_set_coalesce - set coalesce settings for every queue on the netdev
+ * @netdev: the netdev to change
+ * @ec: ethtool coalesce settings
+ *
+ * This will set each queue to the same coalesce settings.
+ **/
 static int i40e_set_coalesce(struct net_device *netdev,
 			     struct ethtool_coalesce *ec)
 {
 	return __i40e_set_coalesce(netdev, ec, -1);
 }
 
+/**
+ * i40e_set_per_queue_coalesce - set specific queue's coalesce settings
+ * @netdev: the netdev to change
+ * @ec: ethtool's coalesce settings
+ * @queue: the queue to change
+ *
+ * Sets the specified queue's coalesce settings.
+ **/
 static int i40e_set_per_queue_coalesce(struct net_device *netdev, u32 queue,
 				       struct ethtool_coalesce *ec)
 {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 5237c491af89..6287bf63c43c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1877,6 +1877,15 @@ static u32 i40e_buildreg_itr(const int type, const u16 itr)
 
 /* a small macro to shorten up some long lines */
 #define INTREG I40E_PFINT_DYN_CTLN
+static inline int get_rx_itr_enabled(struct i40e_vsi *vsi, int idx)
+{
+	return !!(vsi->rx_rings[idx]->rx_itr_setting);
+}
+
+static inline int get_tx_itr_enabled(struct i40e_vsi *vsi, int idx)
+{
+	return !!(vsi->tx_rings[idx]->tx_itr_setting);
+}
 
 /**
  * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt
@@ -1892,6 +1901,7 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	u32 rxval, txval;
 	int vector;
 	int idx = q_vector->v_idx;
+	int rx_itr_setting, tx_itr_setting;
 
 	vector = (q_vector->v_idx + vsi->base_vector);
 
@@ -1900,18 +1910,21 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	 */
 	rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
 
+	rx_itr_setting = get_rx_itr_enabled(vsi, idx);
+	tx_itr_setting = get_tx_itr_enabled(vsi, idx);
+
 	if (q_vector->itr_countdown > 0 ||
-	    (!ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting) &&
-	     !ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting))) {
+	    (!ITR_IS_DYNAMIC(rx_itr_setting) &&
+	     !ITR_IS_DYNAMIC(tx_itr_setting))) {
 		goto enable_int;
 	}
 
-	if (ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting)) {
+	if (ITR_IS_DYNAMIC(tx_itr_setting)) {
 		rx = i40e_set_new_dynamic_itr(&q_vector->rx);
 		rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr);
 	}
 
-	if (ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting)) {
+	if (ITR_IS_DYNAMIC(tx_itr_setting)) {
 		tx = i40e_set_new_dynamic_itr(&q_vector->tx);
 		txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr);
 	}
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index d4c6a767be94..75f2a2cdd738 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1311,6 +1311,19 @@ static u32 i40e_buildreg_itr(const int type, const u16 itr)
 
 /* a small macro to shorten up some long lines */
 #define INTREG I40E_VFINT_DYN_CTLN1
+static inline int get_rx_itr_enabled(struct i40e_vsi *vsi, int idx)
+{
+	struct i40evf_adapter *adapter = vsi->back;
+
+	return !!(adapter->rx_rings[idx].rx_itr_setting);
+}
+
+static inline int get_tx_itr_enabled(struct i40e_vsi *vsi, int idx)
+{
+	struct i40evf_adapter *adapter = vsi->back;
+
+	return !!(adapter->tx_rings[idx].tx_itr_setting);
+}
 
 /**
  * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt
@@ -1325,6 +1338,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	bool rx = false, tx = false;
 	u32 rxval, txval;
 	int vector;
+	int idx = q_vector->v_idx;
+	int rx_itr_setting, tx_itr_setting;
 
 	vector = (q_vector->v_idx + vsi->base_vector);
 
@@ -1333,18 +1348,21 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	 */
 	rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
 
+	rx_itr_setting = get_rx_itr_enabled(vsi, idx);
+	tx_itr_setting = get_tx_itr_enabled(vsi, idx);
+
 	if (q_vector->itr_countdown > 0 ||
-	    (!ITR_IS_DYNAMIC(vsi->rx_itr_setting) &&
-	     !ITR_IS_DYNAMIC(vsi->tx_itr_setting))) {
+	    (!ITR_IS_DYNAMIC(rx_itr_setting) &&
+	     !ITR_IS_DYNAMIC(tx_itr_setting))) {
 		goto enable_int;
 	}
 
-	if (ITR_IS_DYNAMIC(vsi->rx_itr_setting)) {
+	if (ITR_IS_DYNAMIC(rx_itr_setting)) {
 		rx = i40e_set_new_dynamic_itr(&q_vector->rx);
 		rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr);
 	}
 
-	if (ITR_IS_DYNAMIC(vsi->tx_itr_setting)) {
+	if (ITR_IS_DYNAMIC(tx_itr_setting)) {
 		tx = i40e_set_new_dynamic_itr(&q_vector->tx);
 		txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr);
 	}
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index 84e561cc0166..abcdecabbc56 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -287,6 +287,14 @@ struct i40e_ring {
 	u8 dcb_tc;			/* Traffic class of ring */
 	u8 __iomem *tail;
 
+	/* high bit set means dynamic, use accessors routines to read/write.
+	 * hardware only supports 2us resolution for the ITR registers.
+	 * these values always store the USER setting, and must be converted
+	 * before programming to a register.
+	 */
+	u16 rx_itr_setting;
+	u16 tx_itr_setting;
+
 	u16 count;			/* Number of descriptors */
 	u16 reg_idx;			/* HW register index of the ring */
 	u16 rx_buf_len;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index dc00aaf94687..c5fd724313c7 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -59,13 +59,6 @@ struct i40e_vsi {
 	unsigned long state;
 	int base_vector;
 	u16 work_limit;
-	/* high bit set means dynamic, use accessor routines to read/write.
-	 * hardware only supports 2us resolution for the ITR registers.
-	 * these values always store the USER setting, and must be converted
-	 * before programming to a register.
-	 */
-	u16 rx_itr_setting;
-	u16 tx_itr_setting;
 	u16 qs_handle;
 };
 
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
index e17a15456266..a9940154eead 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
@@ -296,92 +296,206 @@ static int i40evf_set_ringparam(struct net_device *netdev,
 }
 
 /**
- * i40evf_get_coalesce - Get interrupt coalescing settings
- * @netdev: network interface device structure
- * @ec: ethtool coalesce structure
+ * __i40evf_get_coalesce - get per-queue coalesce settings
+ * @netdev: the netdev to check
+ * @ec: ethtool coalesce data structure
+ * @queue: which queue to pick
  *
- * Returns current coalescing settings. This is referred to elsewhere in the
- * driver as Interrupt Throttle Rate, as this is how the hardware describes
- * this functionality.
+ * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs
+ * are per queue. If queue is <0 then we default to queue 0 as the
+ * representative value.
  **/
-static int i40evf_get_coalesce(struct net_device *netdev,
-			       struct ethtool_coalesce *ec)
+static int __i40evf_get_coalesce(struct net_device *netdev,
+				 struct ethtool_coalesce *ec,
+				 int queue)
 {
 	struct i40evf_adapter *adapter = netdev_priv(netdev);
 	struct i40e_vsi *vsi = &adapter->vsi;
+	struct i40e_ring *rx_ring, *tx_ring;
 
 	ec->tx_max_coalesced_frames = vsi->work_limit;
 	ec->rx_max_coalesced_frames = vsi->work_limit;
 
-	if (ITR_IS_DYNAMIC(vsi->rx_itr_setting))
+	/* Rx and Tx usecs per queue value. If user doesn't specify the
+	 * queue, return queue 0's value to represent.
+	 */
+	if (queue < 0)
+		queue = 0;
+	else if (queue >= adapter->num_active_queues)
+		return -EINVAL;
+
+	rx_ring = &adapter->rx_rings[queue];
+	tx_ring = &adapter->tx_rings[queue];
+
+	if (ITR_IS_DYNAMIC(rx_ring->rx_itr_setting))
 		ec->use_adaptive_rx_coalesce = 1;
 
-	if (ITR_IS_DYNAMIC(vsi->tx_itr_setting))
+	if (ITR_IS_DYNAMIC(tx_ring->tx_itr_setting))
 		ec->use_adaptive_tx_coalesce = 1;
 
-	ec->rx_coalesce_usecs = vsi->rx_itr_setting & ~I40E_ITR_DYNAMIC;
-	ec->tx_coalesce_usecs = vsi->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+	ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC;
+	ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC;
 
 	return 0;
 }
 
 /**
- * i40evf_set_coalesce - Set interrupt coalescing settings
+ * i40evf_get_coalesce - Get interrupt coalescing settings
  * @netdev: network interface device structure
  * @ec: ethtool coalesce structure
  *
- * Change current coalescing settings.
+ * Returns current coalescing settings. This is referred to elsewhere in the
+ * driver as Interrupt Throttle Rate, as this is how the hardware describes
+ * this functionality. Note that if per-queue settings have been modified this
+ * only represents the settings of queue 0.
  **/
-static int i40evf_set_coalesce(struct net_device *netdev,
+static int i40evf_get_coalesce(struct net_device *netdev,
 			       struct ethtool_coalesce *ec)
 {
-	struct i40evf_adapter *adapter = netdev_priv(netdev);
-	struct i40e_hw *hw = &adapter->hw;
+	return __i40evf_get_coalesce(netdev, ec, -1);
+}
+
+/**
+ * i40evf_get_per_queue_coalesce - get coalesce values for specific queue
+ * @netdev: netdev to read
+ * @ec: coalesce settings from ethtool
+ * @queue: the queue to read
+ *
+ * Read specific queue's coalesce settings.
+ **/
+static int i40evf_get_per_queue_coalesce(struct net_device *netdev,
+					 u32 queue,
+					 struct ethtool_coalesce *ec)
+{
+	return __i40evf_get_coalesce(netdev, ec, queue);
+}
+
+/**
+ * i40evf_set_itr_per_queue - set ITR values for specific queue
+ * @vsi: the VSI to set values for
+ * @ec: coalesce settings from ethtool
+ * @queue: the queue to modify
+ *
+ * Change the ITR settings for a specific queue.
+ **/
+static void i40evf_set_itr_per_queue(struct i40evf_adapter *adapter,
+				     struct ethtool_coalesce *ec,
+				     int queue)
+{
 	struct i40e_vsi *vsi = &adapter->vsi;
+	struct i40e_hw *hw = &adapter->hw;
 	struct i40e_q_vector *q_vector;
+	u16 vector;
+
+	adapter->rx_rings[queue].rx_itr_setting = ec->rx_coalesce_usecs;
+	adapter->tx_rings[queue].tx_itr_setting = ec->tx_coalesce_usecs;
+
+	if (ec->use_adaptive_rx_coalesce)
+		adapter->rx_rings[queue].rx_itr_setting |= I40E_ITR_DYNAMIC;
+	else
+		adapter->rx_rings[queue].rx_itr_setting &= ~I40E_ITR_DYNAMIC;
+
+	if (ec->use_adaptive_tx_coalesce)
+		adapter->tx_rings[queue].tx_itr_setting |= I40E_ITR_DYNAMIC;
+	else
+		adapter->tx_rings[queue].tx_itr_setting &= ~I40E_ITR_DYNAMIC;
+
+	q_vector = adapter->rx_rings[queue].q_vector;
+	q_vector->rx.itr = ITR_TO_REG(adapter->rx_rings[queue].rx_itr_setting);
+	vector = vsi->base_vector + q_vector->v_idx;
+	wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, vector - 1), q_vector->rx.itr);
+
+	q_vector = adapter->tx_rings[queue].q_vector;
+	q_vector->tx.itr = ITR_TO_REG(adapter->tx_rings[queue].tx_itr_setting);
+	vector = vsi->base_vector + q_vector->v_idx;
+	wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, vector - 1), q_vector->tx.itr);
+
+	i40e_flush(hw);
+}
+
+/**
+ * __i40evf_set_coalesce - set coalesce settings for particular queue
+ * @netdev: the netdev to change
+ * @ec: ethtool coalesce settings
+ * @queue: the queue to change
+ *
+ * Sets the coalesce settings for a particular queue.
+ **/
+static int __i40evf_set_coalesce(struct net_device *netdev,
+				 struct ethtool_coalesce *ec,
+				 int queue)
+{
+	struct i40evf_adapter *adapter = netdev_priv(netdev);
+	struct i40e_vsi *vsi = &adapter->vsi;
 	int i;
 
 	if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
 		vsi->work_limit = ec->tx_max_coalesced_frames_irq;
 
-	if ((ec->rx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
-	    (ec->rx_coalesce_usecs <= (I40E_MAX_ITR << 1)))
-		vsi->rx_itr_setting = ec->rx_coalesce_usecs;
-
-	else
+	if (ec->rx_coalesce_usecs == 0) {
+		if (ec->use_adaptive_rx_coalesce)
+			netif_info(adapter, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n");
+	} else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+		   (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+		netif_info(adapter, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
 		return -EINVAL;
+	}
 
-	if ((ec->tx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
-	    (ec->tx_coalesce_usecs <= (I40E_MAX_ITR << 1)))
-		vsi->tx_itr_setting = ec->tx_coalesce_usecs;
-	else if (ec->use_adaptive_tx_coalesce)
-		vsi->tx_itr_setting = (I40E_ITR_DYNAMIC |
-				       ITR_REG_TO_USEC(I40E_ITR_RX_DEF));
 	else
+	if (ec->tx_coalesce_usecs == 0) {
+		if (ec->use_adaptive_tx_coalesce)
+			netif_info(adapter, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n");
+	} else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+		   (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) {
+		netif_info(adapter, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
 		return -EINVAL;
+	}
 
-	if (ec->use_adaptive_rx_coalesce)
-		vsi->rx_itr_setting |= I40E_ITR_DYNAMIC;
-	else
-		vsi->rx_itr_setting &= ~I40E_ITR_DYNAMIC;
-
-	if (ec->use_adaptive_tx_coalesce)
-		vsi->tx_itr_setting |= I40E_ITR_DYNAMIC;
-	else
-		vsi->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
-
-	for (i = 0; i < adapter->num_msix_vectors - NONQ_VECS; i++) {
-		q_vector = &adapter->q_vectors[i];
-		q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
-		wr32(hw, I40E_VFINT_ITRN1(0, i), q_vector->rx.itr);
-		q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
-		wr32(hw, I40E_VFINT_ITRN1(1, i), q_vector->tx.itr);
-		i40e_flush(hw);
+	/* Rx and Tx usecs has per queue value. If user doesn't specify the
+	 * queue, apply to all queues.
+	 */
+	if (queue < 0) {
+		for (i = 0; i < adapter->num_active_queues; i++)
+			i40evf_set_itr_per_queue(adapter, ec, i);
+	} else if (queue < adapter->num_active_queues) {
+		i40evf_set_itr_per_queue(adapter, ec, queue);
+	} else {
+		netif_info(adapter, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
+			   adapter->num_active_queues - 1);
+		return -EINVAL;
 	}
 
 	return 0;
 }
 
+/**
+ * i40evf_set_coalesce - Set interrupt coalescing settings
+ * @netdev: network interface device structure
+ * @ec: ethtool coalesce structure
+ *
+ * Change current coalescing settings for every queue.
+ **/
+static int i40evf_set_coalesce(struct net_device *netdev,
+			       struct ethtool_coalesce *ec)
+{
+	return __i40evf_set_coalesce(netdev, ec, -1);
+}
+
+/**
+ * i40evf_set_per_queue_coalesce - set specific queue's coalesce settings
+ * @netdev: the netdev to change
+ * @ec: ethtool's coalesce settings
+ * @queue: the queue to modify
+ *
+ * Modifies a specific queue's coalesce settings.
+ */
+static int i40evf_set_per_queue_coalesce(struct net_device *netdev,
+					 u32 queue,
+					 struct ethtool_coalesce *ec)
+{
+	return __i40evf_set_coalesce(netdev, ec, queue);
+}
+
 /**
  * i40evf_get_rxnfc - command to get RX flow classification rules
  * @netdev: network interface device structure
@@ -533,6 +647,8 @@ static const struct ethtool_ops i40evf_ethtool_ops = {
 	.set_msglevel		= i40evf_set_msglevel,
 	.get_coalesce		= i40evf_get_coalesce,
 	.set_coalesce		= i40evf_set_coalesce,
+	.get_per_queue_coalesce = i40evf_get_per_queue_coalesce,
+	.set_per_queue_coalesce = i40evf_set_per_queue_coalesce,
 	.get_rxnfc		= i40evf_get_rxnfc,
 	.get_rxfh_indir_size	= i40evf_get_rxfh_indir_size,
 	.get_rxfh		= i40evf_get_rxfh,
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 302c9743ef44..14372810fc27 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -370,7 +370,6 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx)
 {
 	struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx];
 	struct i40e_ring *rx_ring = &adapter->rx_rings[r_idx];
-	struct i40e_vsi *vsi = &adapter->vsi;
 	struct i40e_hw *hw = &adapter->hw;
 
 	rx_ring->q_vector = q_vector;
@@ -379,7 +378,7 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx)
 	q_vector->rx.ring = rx_ring;
 	q_vector->rx.count++;
 	q_vector->rx.latency_range = I40E_LOW_LATENCY;
-	q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
+	q_vector->rx.itr = ITR_TO_REG(rx_ring->rx_itr_setting);
 	q_vector->ring_mask |= BIT(r_idx);
 	q_vector->itr_countdown = ITR_COUNTDOWN_START;
 	wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, v_idx - 1), q_vector->rx.itr);
@@ -396,7 +395,6 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx)
 {
 	struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx];
 	struct i40e_ring *tx_ring = &adapter->tx_rings[t_idx];
-	struct i40e_vsi *vsi = &adapter->vsi;
 	struct i40e_hw *hw = &adapter->hw;
 
 	tx_ring->q_vector = q_vector;
@@ -405,7 +403,7 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx)
 	q_vector->tx.ring = tx_ring;
 	q_vector->tx.count++;
 	q_vector->tx.latency_range = I40E_LOW_LATENCY;
-	q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
+	q_vector->tx.itr = ITR_TO_REG(tx_ring->tx_itr_setting);
 	q_vector->itr_countdown = ITR_COUNTDOWN_START;
 	q_vector->num_ringpairs++;
 	wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, v_idx - 1), q_vector->tx.itr);
@@ -1162,6 +1160,7 @@ static int i40evf_alloc_queues(struct i40evf_adapter *adapter)
 		tx_ring->netdev = adapter->netdev;
 		tx_ring->dev = &adapter->pdev->dev;
 		tx_ring->count = adapter->tx_desc_count;
+		tx_ring->tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF);
 		if (adapter->flags & I40E_FLAG_WB_ON_ITR_CAPABLE)
 			tx_ring->flags |= I40E_TXR_FLAGS_WB_ON_ITR;
 
@@ -1170,6 +1169,7 @@ static int i40evf_alloc_queues(struct i40evf_adapter *adapter)
 		rx_ring->netdev = adapter->netdev;
 		rx_ring->dev = &adapter->pdev->dev;
 		rx_ring->count = adapter->rx_desc_count;
+		rx_ring->rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF);
 	}
 
 	return 0;
@@ -2277,8 +2277,6 @@ int i40evf_process_config(struct i40evf_adapter *adapter)
 	adapter->vsi.back = adapter;
 	adapter->vsi.base_vector = 1;
 	adapter->vsi.work_limit = I40E_DEFAULT_IRQ_WORK;
-	adapter->vsi.rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF);
-	adapter->vsi.tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF);
 	vsi->netdev = adapter->netdev;
 	vsi->qs_handle = adapter->vsi_res->qset_handle;
 	if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF) {
-- 
cgit v1.2.3-55-g7522