From dbc3976d9123a00925e3c9893b3f40f58f82636c Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 7 May 2015 23:43:26 -0700 Subject: clk: bindings: Fix assigned-clock-rates description The binding uses assigned-clock-parents when it should use assigned-clock-rates. Furthermore, the part that describes how they relate to the assigned-clocks property is not clear about what is related. Correct and clarify this part of the binding. Reported-by: Krzysztof Kozlowski Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/clock/clock-bindings.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree/bindings/clock') diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 06fc6d541c89..2ec489eebe72 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -138,9 +138,10 @@ Some platforms may require initial configuration of default parent clocks and clock frequencies. Such a configuration can be specified in a device tree node through assigned-clocks, assigned-clock-parents and assigned-clock-rates properties. The assigned-clock-parents property should contain a list of parent -clocks in form of phandle and clock specifier pairs, the assigned-clock-parents -property the list of assigned clock frequency values - corresponding to clocks -listed in the assigned-clocks property. +clocks in the form of a phandle and clock specifier pair and the +assigned-clock-rates property should contain a list of frequencies in Hz. Both +these properties should correspond to the clocks listed in the assigned-clocks +property. To skip setting parent or rate of a clock its corresponding entry should be set to 0, or can be omitted if it is not followed by any non-zero entry. -- cgit v1.2.3-55-g7522