From 753b9c9cfdfeae57f956c55e1ccdfcf2d90e6196 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 14 Jan 2015 12:12:59 +0100 Subject: ARM: shmobile: Add DT bindings for Renesas memory controllers Add DT bindings for Renesas R-Mobile and SH-Mobile memory controllers. Currently memory controller device nodes are used only to reference PM domains, and prevent these PM domains from being powered down, which would crash the system. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- .../renesas-memory-controllers.txt | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt (limited to 'Documentation/devicetree/bindings/memory-controllers') diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt b/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt new file mode 100644 index 000000000000..c64b7925cd09 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt @@ -0,0 +1,44 @@ +DT bindings for Renesas R-Mobile and SH-Mobile memory controllers +================================================================= + +Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers. +These memory controllers differ from one SoC variant to another, and are called +by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller +(DBSC3)", "SDRAM Bus State Controller (SBSC)"). + +Currently memory controller device nodes are used only to reference PM +domains, and prevent these PM domains from being powered down, which would +crash the system. + +As there exist no actual drivers for these controllers yet, these bindings +should be considered EXPERIMENTAL for now. + +Required properties: + - compatible: Must be one of the following SoC-specific values: + - "renesas,dbsc-r8a73a4" (R-Mobile APE6) + - "renesas,dbsc3-r8a7740" (R-Mobile A1) + - "renesas,sbsc-sh73a0" (SH-Mobile AG5) + - reg: Must contain the base address and length of the memory controller's + registers. + +Optional properties: + - interrupts: Must contain a list of interrupt specifiers for memory + controller interrupts, if available. + - interrupts-names: Must contain a list of interrupt names corresponding to + the interrupts in the interrupts property, if available. + Valid interrupt names are: + - "sec" (secure interrupt) + - "temp" (normal (temperature) interrupt) + - power-domains: Must contain a reference to the PM domain that the memory + controller belongs to, if available. + +Example: + + sbsc1: memory-controller@fe400000 { + compatible = "renesas,sbsc-sh73a0"; + reg = <0xfe400000 0x400>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, + <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sec", "temp"; + power-domains = <&pd_a4bc0>; + }; -- cgit v1.2.3-55-g7522