From b2e63555592f81331c8da3afaa607d8cf83e8138 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 10 Sep 2017 01:30:46 +0200 Subject: i2c: gpio: Convert to use descriptors This converts the GPIO-based I2C-driver to using GPIO descriptors instead of the old global numberspace-based GPIO interface. We: - Convert the driver to unconditionally grab two GPIOs from the device by index 0 (SDA) and 1 (SCL) which will work fine with device tree and descriptor tables. The existing device trees will continue to work just like before, but without any roundtrip through the global numberspace. - Brutally convert all boardfiles still passing global GPIOs by registering descriptor tables associated with the devices instead so this driver does not need to keep supporting passing any GPIO numbers as platform data. There is no stepwise approach as elegant as this, I strongly prefer this big hammer over any antsteps for this conversion. This way the old GPIO numbers go away and NEVER COME BACK. Special conversion for the different boards utilizing I2C-GPIO: - EP93xx (arch/arm/mach-ep93xx): pretty straight forward as all boards were using the same two GPIO lines, just define these two in a lookup table for "i2c-gpio" and register these along with the device. None of them define any other platform data so just pass NULL as platform data. This platform selects GPIOLIB so all should be smooth. The pins appear on a gpiochip for bank "G" as pins 1 (SDA) and 0 (SCL). - IXP4 (arch/arm/mach-ixp4): descriptor tables have to be registered for each board separately. They all use "IXP4XX_GPIO_CHIP" so it is pretty straight forward. Most board define no other platform data than SCL/SDA so they can drop the #include of and assign NULL to platform data. The "goramo_mlr" (Goramo Multilink Router) board is a bit worrisome: it implements its own I2C bit-banging in the board file, and optionally registers an I2C serial port, but claims the same GPIO lines for itself in the board file. This is not going to work: there will be competition for the GPIO lines, so delete the optional extra I2C bus instead, no I2C devices are registered on it anyway, there are just hints that it may contain an EEPROM that may be accessed from userspace. This needs to be fixed up properly by the serial clock using I2C emulation so drop a note in the code. - KS8695 board acs5k (arch/arm/mach-ks8695/board-acs5.c) has some platform data in addition to the pins so it needs to be kept around sans GPIO lines. Its GPIO chip is named "KS8695" and the arch selects GPIOLIB. - PXA boards (arch/arm/mach-pxa/*) use some of the platform data so it needs to be preserved here. The viper board even registers two GPIO I2Cs. The gpiochip is named "gpio-pxa" and the arch selects GPIOLIB. - SA1100 Simpad (arch/arm/mach-sa1100/simpad.c) defines a GPIO I2C bus, and the arch selects GPIOLIB. - Blackfin boards (arch/blackfin/bf533 etc) for these I assume their I2C GPIOs refer to the local gpiochip defined in arch/blackfin/kernel/bfin_gpio.c names "BFIN-GPIO". The arch selects GPIOLIB. The boards get spiked with IF_ENABLED(I2C_GPIO) but that is a side effect of it being like that already (I would just have Kconfig select I2C_GPIO and get rid of them all.) I also delete any platform data set to 0 as it will get that value anyway from static declartions of platform data. - The MIPS selects GPIOLIB and the Alchemy machine is using two local GPIO chips, one of them has a GPIO I2C. We need to adjust the local offset from the global number space here. The ATH79 has a proper GPIO driver in drivers/gpio/gpio-ath79.c and AFAICT the chip is named "ath79-gpio" and the PB44 PCF857x expander spawns from this on GPIO 1 and 0. The latter board only use the platform data to specify pins so it can be cut altogether after this. - The MFD Silicon Motion SM501 is a special case. It dynamically spawns an I2C bus off the MFD using sm501_create_subdev(). We use an approach to dynamically create a machine descriptor table and attach this to the "SM501-LOW" or "SM501-HIGH" gpiochip. We use chip-local offsets to grab the right lines. We can get rid of two local static inline helpers as part of this refactoring. Cc: Steven Miao Cc: Ralf Baechle Cc: Guenter Roeck Cc: Ville Syrjälä Cc: Magnus Damm Cc: Ben Dooks Cc: Heiko Schocher Acked-by: Wu, Aaron Acked-by: Olof Johansson Acked-by: Lee Jones Acked-by: Ralf Baechle Tested-by: Geert Uytterhoeven Signed-off-by: Linus Walleij --- arch/arm/mach-ep93xx/core.c | 39 +++++++++++++++------------- arch/arm/mach-ep93xx/edb93xx.c | 15 ++--------- arch/arm/mach-ep93xx/include/mach/platform.h | 4 +-- arch/arm/mach-ep93xx/simone.c | 12 +-------- arch/arm/mach-ep93xx/snappercl15.c | 12 +-------- arch/arm/mach-ep93xx/vision_ep9307.c | 7 +---- 6 files changed, 27 insertions(+), 62 deletions(-) (limited to 'arch/arm/mach-ep93xx') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f53c61813998..7e99fe829ad1 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include #include @@ -320,42 +320,45 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) /************************************************************************* * EP93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data ep93xx_i2c_data; + +/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ +static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + /* Use local offsets on gpiochip/port "G" */ + GPIO_LOOKUP_IDX("G", 1, NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("G", 0, NULL, 1, GPIO_ACTIVE_HIGH), + }, +}; static struct platform_device ep93xx_i2c_device = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &ep93xx_i2c_data, + .platform_data = NULL, }, }; /** * ep93xx_register_i2c - Register the i2c platform device. - * @data: platform specific i2c-gpio configuration (__initdata) * @devices: platform specific i2c bus device information (__initdata) * @num: the number of devices on the i2c bus */ -void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, - struct i2c_board_info *devices, int num) +void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) { /* - * Set the EEPROM interface pin drive type control. - * Defines the driver type for the EECLK and EEDAT pins as either - * open drain, which will require an external pull-up, or a normal - * CMOS driver. + * FIXME: this just sets the two pins as non-opendrain, as no + * platforms tries to do that anyway. Flag the applicable lines + * as open drain in the GPIO_LOOKUP above and the driver or + * gpiolib will handle open drain/open drain emulation as need + * be. Right now i2c-gpio emulates open drain which is not + * optimal. */ - if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) - pr_warning("sda != EEDAT, open drain has no effect\n"); - if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) - pr_warning("scl != EECLK, open drain has no effect\n"); - - __raw_writel((data->sda_is_open_drain << 1) | - (data->scl_is_open_drain << 0), + __raw_writel((0 << 1) | (0 << 0), EP93XX_GPIO_EEDRIVE); - ep93xx_i2c_data = *data; i2c_register_board_info(0, devices, num); + gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table); platform_device_register(&ep93xx_i2c_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 7a7f280b07d7..8e89ec8b6f0f 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include @@ -61,14 +60,6 @@ static struct ep93xx_eth_data __initdata edb93xx_eth_data = { /************************************************************************* * EDB93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, /* default to 100 kHz */ - .timeout = 0, /* default to 100 ms */ -}; static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { { @@ -86,13 +77,11 @@ static void __init edb93xx_register_i2c(void) { if (machine_is_edb9302a() || machine_is_edb9307a() || machine_is_edb9315a()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data, - edb93xxa_i2c_board_info, + ep93xx_register_i2c(edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9302() || machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data, - edb93xx_i2c_board_info, + ep93xx_register_i2c(edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); } } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index db0839691ef5..a686fd6caee1 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -7,7 +7,6 @@ #include struct device; -struct i2c_gpio_platform_data; struct i2c_board_info; struct spi_board_info; struct platform_device; @@ -36,8 +35,7 @@ void ep93xx_register_flash(unsigned int width, resource_size_t start, resource_size_t size); void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, - struct i2c_board_info *devices, int num); +void ep93xx_register_i2c(struct i2c_board_info *devices, int num); void ep93xx_register_spi(struct ep93xx_spi_info *info, struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index c7a40f245892..e61f3dee24c2 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -129,15 +128,6 @@ static struct ep93xx_spi_info simone_spi_info __initdata = { .use_dma = 1, }; -static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, - .timeout = 0, -}; - static struct i2c_board_info __initdata simone_i2c_board_info[] = { { I2C_BOARD_INFO("ds1337", 0x68), @@ -161,7 +151,7 @@ static void __init simone_init_machine(void) ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&simone_eth_data, 1); ep93xx_register_fb(&simone_fb_info); - ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, + ep93xx_register_i2c(simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); ep93xx_register_spi(&simone_spi_info, simone_spi_devices, ARRAY_SIZE(simone_spi_devices)); diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 8b29398f4dc7..45940c1d7787 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -127,15 +126,6 @@ static struct ep93xx_eth_data __initdata snappercl15_eth_data = { .phy_id = 1, }; -static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, - .timeout = 0, -}; - static struct i2c_board_info __initdata snappercl15_i2c_data[] = { { /* Audio codec */ @@ -161,7 +151,7 @@ static void __init snappercl15_init_machine(void) { ep93xx_init_devices(); ep93xx_register_eth(&snappercl15_eth_data, 1); - ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, + ep93xx_register_i2c(snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); snappercl15_register_audio(); diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 1daf9441058c..5a0b6187990a 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -144,10 +143,6 @@ static struct pca953x_platform_data pca953x_77_gpio_data = { /************************************************************************* * I2C Bus *************************************************************************/ -static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .scl_pin = EP93XX_GPIO_LINE_EECLK, -}; static struct i2c_board_info vision_i2c_info[] __initdata = { { @@ -289,7 +284,7 @@ static void __init vision_init_machine(void) vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); - ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, + ep93xx_register_i2c(vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, ARRAY_SIZE(vision_spi_board_info)); -- cgit v1.2.3-55-g7522 From 4d0ce62c0a02e41a65cfdcfe277f5be430edc371 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 10 Sep 2017 23:03:32 +0200 Subject: i2c: gpio: Augment all boardfiles to use open drain We now handle the open drain mode internally in the I2C GPIO driver, but we will get warnings from the gpiolib that we override the default mode of the line so it becomes open drain. We can fix all in-kernel users by simply passing the right flag along in the descriptor table, and we already touched all of these files in the series so let's just tidy it up. Cc: Steven Miao Cc: Ralf Baechle Acked-by: Olof Johansson Acked-by: Lee Jones Acked-by: Robert Jarzmik Acked-by: Ralf Baechle Acked-by: Wu, Aaron Acked-by: Arnd Bergmann Tested-by: Geert Uytterhoeven Signed-off-by: Linus Walleij --- arch/arm/mach-ep93xx/core.c | 6 ++++-- arch/arm/mach-ixp4xx/avila-setup.c | 4 ++-- arch/arm/mach-ixp4xx/dsmg600-setup.c | 4 ++-- arch/arm/mach-ixp4xx/fsg-setup.c | 4 ++-- arch/arm/mach-ixp4xx/ixdp425-setup.c | 4 ++-- arch/arm/mach-ixp4xx/nas100d-setup.c | 4 ++-- arch/arm/mach-ixp4xx/nslu2-setup.c | 4 ++-- arch/arm/mach-ks8695/board-acs5k.c | 6 ++++-- arch/arm/mach-pxa/palmz72.c | 6 ++++-- arch/arm/mach-pxa/viper.c | 8 ++++---- arch/arm/mach-sa1100/simpad.c | 6 ++++-- arch/blackfin/mach-bf533/boards/blackstamp.c | 4 ++-- arch/blackfin/mach-bf533/boards/ezkit.c | 4 ++-- arch/blackfin/mach-bf533/boards/stamp.c | 4 ++-- arch/blackfin/mach-bf561/boards/ezkit.c | 4 ++-- arch/mips/alchemy/board-gpr.c | 4 ++++ arch/mips/ath79/mach-pb44.c | 4 ++-- drivers/mfd/sm501.c | 4 ++-- 18 files changed, 48 insertions(+), 36 deletions(-) (limited to 'arch/arm/mach-ep93xx') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 7e99fe829ad1..e70feec6fad5 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -326,8 +326,10 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { /* Use local offsets on gpiochip/port "G" */ - GPIO_LOOKUP_IDX("G", 1, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("G", 0, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("G", 1, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("G", 0, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 72122b5e7f28..bb6fbfc9b11a 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -53,9 +53,9 @@ static struct gpiod_lookup_table avila_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 68ccd669051b..af543dd3da5d 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -72,9 +72,9 @@ static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index a0350ad15175..8afb3f4db376 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -58,9 +58,9 @@ static struct gpiod_lookup_table fsg_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 8937263cec4a..4f358350a91f 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -126,9 +126,9 @@ static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 612ec8c63456..7e59c59c96a3 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -104,9 +104,9 @@ static struct gpiod_lookup_table nas100d_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 13afb03b50fa..224717eb8ac2 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -72,9 +72,9 @@ static struct gpiod_lookup_table nslu2_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index f034724e01e1..937eb1d47e7b 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -41,8 +41,10 @@ static struct gpiod_lookup_table acs5k_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { - GPIO_LOOKUP_IDX("KS8695", 4, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("KS8695", 5, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("KS8695", 4, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("KS8695", 5, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 94f75632c007..5877e547cecd 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -324,8 +324,10 @@ static struct soc_camera_link palmz72_iclink = { static struct gpiod_lookup_table palmz72_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { - GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index a680742bee2b..4185e7ff073f 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -463,9 +463,9 @@ static struct gpiod_lookup_table viper_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SCL_GPIO, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; @@ -792,9 +792,9 @@ struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SCL_GPIO, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index c6e7e6d8733a..91526024964b 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -327,8 +327,10 @@ static struct platform_device simpad_gpio_leds = { static struct gpiod_lookup_table simpad_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { - GPIO_LOOKUP_IDX("gpio", GPIO_GPIO21, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio", GPIO_GPIO25, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio", GPIO_GPIO21, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("gpio", GPIO_GPIO25, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index d801ca5ca6c4..fab69c736515 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -367,9 +367,9 @@ static struct gpiod_lookup_table bfin_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF8, NULL, 0, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF9, NULL, 1, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 463a72358b0e..d64d270e9e62 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -395,9 +395,9 @@ static struct gpiod_lookup_table bfin_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index d2479359adb7..27cbf2fa2c62 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -517,9 +517,9 @@ static struct gpiod_lookup_table bfin_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF2, NULL, 0, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF3, NULL, 1, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 72f757ebaa84..acc5363f60c6 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -384,9 +384,9 @@ static struct gpiod_lookup_table bfin_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c index daebc36e5ecb..328d697e72b4 100644 --- a/arch/mips/alchemy/board-gpr.c +++ b/arch/mips/alchemy/board-gpr.c @@ -235,6 +235,10 @@ static struct gpiod_lookup_table gpr_i2c_gpiod_table = { }; static struct i2c_gpio_platform_data gpr_i2c_data = { + /* + * The open drain mode is hardwired somewhere or an electrical + * property of the alchemy GPIO controller. + */ .sda_is_open_drain = 1, .scl_is_open_drain = 1, .udelay = 2, /* ~100 kHz */ diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c index a95409063847..6b2c6f3baefa 100644 --- a/arch/mips/ath79/mach-pb44.c +++ b/arch/mips/ath79/mach-pb44.c @@ -37,9 +37,9 @@ static struct gpiod_lookup_table pb44_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 4d40d013a412..ad774161a22d 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1152,7 +1152,7 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm, lookup->table[0].chip_hwnum = iic->pin_sda % 32; lookup->table[0].con_id = NULL; lookup->table[0].idx = 0; - lookup->table[0].flags = GPIO_ACTIVE_HIGH; + lookup->table[0].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN; if (iic->pin_scl < 32) lookup->table[1].chip_label = "SM501-LOW"; else @@ -1160,7 +1160,7 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm, lookup->table[1].chip_hwnum = iic->pin_scl % 32; lookup->table[1].con_id = NULL; lookup->table[1].idx = 1; - lookup->table[1].flags = GPIO_ACTIVE_HIGH; + lookup->table[1].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN; gpiod_add_lookup_table(lookup); icd = dev_get_platdata(&pdev->dev); -- cgit v1.2.3-55-g7522