From f535daed925c2d3c1db06b06a63c4955f2c51988 Mon Sep 17 00:00:00 2001 From: Kan-Ru Chen Date: Mon, 2 Aug 2010 14:21:41 +0300 Subject: omap: Devkit8000: Use DIE id to initialize dm9000 MAC address The devkit8000 boards often come with empty EEPROM thus without valid ethernet MAC address. The DIE id to MAC formula is copied from u-boot. Signed-off-by: Kan-Ru Chen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm/mach-omap2/board-devkit8000.c') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 77022b588816..128b9329ef25 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -33,6 +33,7 @@ #include #include +#include #include #include #include @@ -560,6 +561,9 @@ static struct platform_device omap_dm9000_dev = { static void __init omap_dm9000_init(void) { + unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; + struct omap_die_id odi; + if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", OMAP_DM9000_GPIO_IRQ); @@ -567,6 +571,16 @@ static void __init omap_dm9000_init(void) } gpio_direction_input(OMAP_DM9000_GPIO_IRQ); + + /* init the mac address using DIE id */ + omap_get_die_id(&odi); + + eth_addr[0] = 0x02; /* locally administered */ + eth_addr[1] = odi.id_1 & 0xff; + eth_addr[2] = (odi.id_0 & 0xff000000) >> 24; + eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16; + eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8; + eth_addr[5] = (odi.id_0 & 0x000000ff); } static struct platform_device *devkit8000_devices[] __initdata = { -- cgit v1.2.3-55-g7522