From 458baa95c86406c81c6ebac0a98d1689075a3ec4 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 26 Mar 2018 23:17:43 +0200 Subject: ARM64: dts: meson-gxm: add GXM specific USB host configuration The USB configuration on GXM is slightly different than on GXL. The dwc3 controller's internal hub has three USB2 ports (instead of 2 on GXL) along with a dedicated USB2 PHY for this port. However, it seems that there are no pins on GXM which would allow connecting the third port to a physical USB port. Passing the third PHY is required though, because without it none of the other USB ports is working (this seems to be a limitation of how the internal USB hub works, if one PHY is disabled then no USB port works). Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm64/boot/dts/amlogic') diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index d076a7c425dd..247888d68a3a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -80,6 +80,19 @@ }; }; +&apb { + usb2_phy2: phy@78040 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x78040 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + status = "okay"; + }; +}; + &clkc_AO { compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc"; }; @@ -100,3 +113,7 @@ &hdmi_tx { compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; }; + +&dwc3 { + phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; +}; -- cgit v1.2.3-55-g7522