From c066a32a890c50ce59e91f8cea8eb5fd8d5821b9 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 28 Dec 2006 18:22:32 +0100 Subject: [MIPS] Support for several more SNI RM models. Signed-off-by: Ralf Baechle --- arch/mips/sni/time.c | 148 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 148 insertions(+) create mode 100644 arch/mips/sni/time.c (limited to 'arch/mips/sni/time.c') diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c new file mode 100644 index 000000000000..20028fc7757e --- /dev/null +++ b/arch/mips/sni/time.c @@ -0,0 +1,148 @@ +#include +#include +#include + +#include +#include + +#define SNI_CLOCK_TICK_RATE 3686400 +#define SNI_COUNTER2_DIV 64 +#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) + +static void sni_a20r_timer_ack(void) +{ + *(volatile u8 *)A20R_PT_TIM0_ACK = 0x0; wmb(); +} + +/* + * a20r platform uses 2 counters to divide the input frequency. + * Counter 2 output is connected to Counter 0 & 1 input. + */ +static void __init sni_a20r_timer_setup(struct irqaction *irq) +{ + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = (SNI_COUNTER0_DIV) & 0xff; wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = (SNI_COUNTER0_DIV >> 8) & 0xff; wmb(); + + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = (SNI_COUNTER2_DIV) & 0xff; wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = (SNI_COUNTER2_DIV >> 8) & 0xff; wmb(); + + setup_irq(SNI_A20R_IRQ_TIMER, irq); + mips_timer_ack = sni_a20r_timer_ack; +} + +#define SNI_8254_TICK_RATE 1193182UL + +#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255) + +static __init unsigned long dosample(void) +{ + u32 ct0, ct1; + volatile u8 msb, lsb; + + /* Start the counter. */ + outb_p (0x34, 0x43); + outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40); + outb (SNI_8254_TCSAMP_COUNTER >> 8, 0x40); + + /* Get initial counter invariant */ + ct0 = read_c0_count(); + + /* Latch and spin until top byte of counter0 is zero */ + do { + outb (0x00, 0x43); + lsb = inb (0x40); + msb = inb (0x40); + ct1 = read_c0_count(); + } while (msb); + + /* Stop the counter. */ + outb (0x38, 0x43); + /* + * Return the difference, this is how far the r4k counter increments + * for every 1/HZ seconds. We round off the nearest 1 MHz of master + * clock (= 1000000 / HZ / 2). + */ + /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/ + return (ct1 - ct0) / (500000/HZ) * (500000/HZ); +} + +/* + * Here we need to calibrate the cycle counter to at least be close. + */ +__init void sni_cpu_time_init(void) +{ + unsigned long r4k_ticks[3]; + unsigned long r4k_tick; + + /* + * Figure out the r4k offset, the algorithm is very simple and works in + * _all_ cases as long as the 8254 counter register itself works ok (as + * an interrupt driving timer it does not because of bug, this is why + * we are using the onchip r4k counter/compare register to serve this + * purpose, but for r4k_offset calculation it will work ok for us). + * There are other very complicated ways of performing this calculation + * but this one works just fine so I am not going to futz around. ;-) + */ + printk(KERN_INFO "Calibrating system timer... "); + dosample(); /* Prime cache. */ + dosample(); /* Prime cache. */ + /* Zero is NOT an option. */ + do { + r4k_ticks[0] = dosample(); + } while (!r4k_ticks[0]); + do { + r4k_ticks[1] = dosample(); + } while (!r4k_ticks[1]); + + if (r4k_ticks[0] != r4k_ticks[1]) { + printk("warning: timer counts differ, retrying... "); + r4k_ticks[2] = dosample(); + if (r4k_ticks[2] == r4k_ticks[0] + || r4k_ticks[2] == r4k_ticks[1]) + r4k_tick = r4k_ticks[2]; + else { + printk("disagreement, using average... "); + r4k_tick = (r4k_ticks[0] + r4k_ticks[1] + + r4k_ticks[2]) / 3; + } + } else + r4k_tick = r4k_ticks[0]; + + printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick, + (int) (r4k_tick / (500000 / HZ)), + (int) (r4k_tick % (500000 / HZ))); + + mips_hpt_frequency = r4k_tick * HZ; +} + +/* + * R4k counter based timer interrupt. Works on RM200-225 and possibly + * others but not on RM400 + */ +static void __init sni_cpu_timer_setup(struct irqaction *irq) +{ + setup_irq(SNI_MIPS_IRQ_CPU_TIMER, irq); +} + +void __init plat_timer_setup(struct irqaction *irq) +{ + switch (sni_brd_type) { + case SNI_BRD_10: + case SNI_BRD_10NEW: + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + sni_a20r_timer_setup (irq); + break; + + case SNI_BRD_PCI_TOWER: + case SNI_BRD_RM200: + case SNI_BRD_PCI_MTOWER: + case SNI_BRD_PCI_DESKTOP: + case SNI_BRD_PCI_TOWER_CPLUS: + case SNI_BRD_PCI_MTOWER_CPLUS: + sni_cpu_timer_setup (irq); + break; + } +} -- cgit v1.2.3-55-g7522