From 0b5ea1e230432d79ce985338bbcbab1f82ae26a0 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 3 Sep 2012 14:33:39 +0100 Subject: ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT The SMSC911x Ethernet chip requires a fixed-regulator in order to function correctly. We have previously provided a means to obtain this during a Device Tree boot, however nothing has been put into place when booting with a non-DT kernel. This patch aims to change that. Signed-off-by: Lee Jones [Added a Kconfig select so the build does not break] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + arch/arm/mach-ux500/board-mop500-regulators.c | 15 +++++++++++++++ arch/arm/mach-ux500/board-mop500-regulators.h | 1 + arch/arm/mach-ux500/board-mop500.c | 19 +++++++++++++++++++ 4 files changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79cac..220eb8a8b593 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -28,6 +28,7 @@ config MACH_MOP500 select I2C select I2C_NOMADIK select SOC_BUS + select REGULATOR_FIXED_VOLTAGE help Include support for the MOP500 development platform. diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 52426a425787..2a17bc506cff 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -13,6 +13,21 @@ #include #include "board-mop500-regulators.h" +static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +struct regulator_init_data gpio_en_3v3_regulator = { + .constraints = { + .name = "EN-3V3", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers), + .consumer_supplies = gpio_en_3v3_consumers, +}; + /* * TPS61052 regulator */ diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 94992158d962..78a0642a2206 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -18,5 +18,6 @@ extern struct ab8500_regulator_reg_init ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; extern struct regulator_init_data tps61052_regulator; +extern struct regulator_init_data gpio_en_3v3_regulator; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a890fd1c..34359b056e2e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -76,6 +77,23 @@ static struct platform_device snowball_led_dev = { }, }; +static struct fixed_voltage_config snowball_gpio_en_3v3_data = { + .supply_name = "EN-3V3", + .gpio = SNOWBALL_EN_3V3_ETH_GPIO, + .microvolts = 3300000, + .enable_high = 1, + .init_data = &gpio_en_3v3_regulator, + .startup_delay = 5000, /* 1200us */ +}; + +static struct platform_device snowball_gpio_en_3v3_regulator_dev = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &snowball_gpio_en_3v3_data, + }, +}; + static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, @@ -586,6 +604,7 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_led_dev, &snowball_key_dev, &snowball_sbnet_dev, + &snowball_gpio_en_3v3_regulator_dev, }; static void __init mop500_init_machine(void) -- cgit v1.2.3-55-g7522