From 365cfa1ed5a36f9bcb9f64c9f0f52155af2e9fef Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sun, 28 Mar 2010 00:22:14 -0400 Subject: ahci: Move generic code into libahci This patch should contain no functional changes, just moves code around. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2564 +++------------------------------------------------- 1 file changed, 143 insertions(+), 2421 deletions(-) (limited to 'drivers/ata/ahci.c') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index d5dc1238a88d..feaefb84ffa2 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -46,67 +46,13 @@ #include #include #include +#include "ahci.h" #define DRV_NAME "ahci" #define DRV_VERSION "3.0" -/* Enclosure Management Control */ -#define EM_CTRL_MSG_TYPE 0x000f0000 - -/* Enclosure Management LED Message Type */ -#define EM_MSG_LED_HBA_PORT 0x0000000f -#define EM_MSG_LED_PMP_SLOT 0x0000ff00 -#define EM_MSG_LED_VALUE 0xffff0000 -#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 -#define EM_MSG_LED_VALUE_OFF 0xfff80000 -#define EM_MSG_LED_VALUE_ON 0x00010000 - -static int ahci_skip_host_reset; -static int ahci_ignore_sss; - -module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); -MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); - -module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); -MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); - -static int ahci_enable_alpm(struct ata_port *ap, - enum link_pm policy); -static void ahci_disable_alpm(struct ata_port *ap); -static ssize_t ahci_led_show(struct ata_port *ap, char *buf); -static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, - size_t size); -static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, - ssize_t size); - enum { AHCI_PCI_BAR = 5, - AHCI_MAX_PORTS = 32, - AHCI_MAX_SG = 168, /* hardware max is 64K */ - AHCI_DMA_BOUNDARY = 0xffffffff, - AHCI_MAX_CMDS = 32, - AHCI_CMD_SZ = 32, - AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, - AHCI_RX_FIS_SZ = 256, - AHCI_CMD_TBL_CDB = 0x40, - AHCI_CMD_TBL_HDR_SZ = 0x80, - AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), - AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, - AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + - AHCI_RX_FIS_SZ, - AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ + - AHCI_CMD_TBL_AR_SZ + - (AHCI_RX_FIS_SZ * 16), - AHCI_IRQ_ON_SG = (1 << 31), - AHCI_CMD_ATAPI = (1 << 5), - AHCI_CMD_WRITE = (1 << 6), - AHCI_CMD_PREFETCH = (1 << 7), - AHCI_CMD_RESET = (1 << 8), - AHCI_CMD_CLR_BUSY = (1 << 10), - - RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ - RX_FIS_SDB = 0x58, /* offset of SDB FIS data */ - RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ board_ahci = 0, board_ahci_vt8251 = 1, @@ -118,332 +64,19 @@ enum { board_ahci_nopmp = 7, board_ahci_yesncq = 8, board_ahci_nosntf = 9, - - /* global controller registers */ - HOST_CAP = 0x00, /* host capabilities */ - HOST_CTL = 0x04, /* global host control */ - HOST_IRQ_STAT = 0x08, /* interrupt status */ - HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ - HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ - HOST_EM_LOC = 0x1c, /* Enclosure Management location */ - HOST_EM_CTL = 0x20, /* Enclosure Management Control */ - HOST_CAP2 = 0x24, /* host capabilities, extended */ - - /* HOST_CTL bits */ - HOST_RESET = (1 << 0), /* reset controller; self-clear */ - HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ - HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ - - /* HOST_CAP bits */ - HOST_CAP_SXS = (1 << 5), /* Supports External SATA */ - HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ - HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */ - HOST_CAP_PART = (1 << 13), /* Partial state capable */ - HOST_CAP_SSC = (1 << 14), /* Slumber state capable */ - HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */ - HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */ - HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ - HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */ - HOST_CAP_CLO = (1 << 24), /* Command List Override support */ - HOST_CAP_LED = (1 << 25), /* Supports activity LED */ - HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */ - HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ - HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */ - HOST_CAP_SNTF = (1 << 29), /* SNotification register */ - HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ - HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ - - /* HOST_CAP2 bits */ - HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */ - HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */ - HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */ - - /* registers for each SATA port */ - PORT_LST_ADDR = 0x00, /* command list DMA addr */ - PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ - PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ - PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ - PORT_IRQ_STAT = 0x10, /* interrupt status */ - PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ - PORT_CMD = 0x18, /* port command */ - PORT_TFDATA = 0x20, /* taskfile data */ - PORT_SIG = 0x24, /* device TF signature */ - PORT_CMD_ISSUE = 0x38, /* command issue */ - PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ - PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ - PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ - PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ - PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ - PORT_FBS = 0x40, /* FIS-based Switching */ - - /* PORT_IRQ_{STAT,MASK} bits */ - PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ - PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ - PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ - PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ - PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ - PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ - PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ - PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ - - PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ - PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ - PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ - PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ - PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ - PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ - PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ - PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ - PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ - - PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | - PORT_IRQ_IF_ERR | - PORT_IRQ_CONNECT | - PORT_IRQ_PHYRDY | - PORT_IRQ_UNK_FIS | - PORT_IRQ_BAD_PMP, - PORT_IRQ_ERROR = PORT_IRQ_FREEZE | - PORT_IRQ_TF_ERR | - PORT_IRQ_HBUS_DATA_ERR, - DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | - PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | - PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, - - /* PORT_CMD bits */ - PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ - PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ - PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ - PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ - PORT_CMD_PMP = (1 << 17), /* PMP attached */ - PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ - PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ - PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ - PORT_CMD_CLO = (1 << 3), /* Command list override */ - PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ - PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ - PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ - - PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ - PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ - PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ - PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ - - PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ - PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ - PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ - PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */ - PORT_FBS_SDE = (1 << 2), /* FBS single device error */ - PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ - PORT_FBS_EN = (1 << 0), /* Enable FBS */ - - /* hpriv->flags bits */ - AHCI_HFLAG_NO_NCQ = (1 << 0), - AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ - AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */ - AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */ - AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ - AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ - AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ - AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ - AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ - AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ - AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ - AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as - link offline */ - AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */ - - /* ap->flags bits */ - - AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_ACPI_SATA | ATA_FLAG_AN | - ATA_FLAG_IPM, - - ICH_MAP = 0x90, /* ICH MAP register */ - - /* em constants */ - EM_MAX_SLOTS = 8, - EM_MAX_RETRY = 5, - - /* em_ctl bits */ - EM_CTL_RST = (1 << 9), /* Reset */ - EM_CTL_TM = (1 << 8), /* Transmit Message */ - EM_CTL_ALHD = (1 << 26), /* Activity LED */ -}; - -struct ahci_cmd_hdr { - __le32 opts; - __le32 status; - __le32 tbl_addr; - __le32 tbl_addr_hi; - __le32 reserved[4]; -}; - -struct ahci_sg { - __le32 addr; - __le32 addr_hi; - __le32 reserved; - __le32 flags_size; -}; - -struct ahci_em_priv { - enum sw_activity blink_policy; - struct timer_list timer; - unsigned long saved_activity; - unsigned long activity; - unsigned long led_state; -}; - -struct ahci_host_priv { - void __iomem * mmio; /* bus-independant mem map */ - unsigned int flags; /* AHCI_HFLAG_* */ - u32 cap; /* cap to use */ - u32 cap2; /* cap2 to use */ - u32 port_map; /* port map to use */ - u32 saved_cap; /* saved initial cap */ - u32 saved_cap2; /* saved initial cap2 */ - u32 saved_port_map; /* saved initial port_map */ - u32 em_loc; /* enclosure management location */ -}; - -struct ahci_port_priv { - struct ata_link *active_link; - struct ahci_cmd_hdr *cmd_slot; - dma_addr_t cmd_slot_dma; - void *cmd_tbl; - dma_addr_t cmd_tbl_dma; - void *rx_fis; - dma_addr_t rx_fis_dma; - /* for NCQ spurious interrupt analysis */ - unsigned int ncq_saw_d2h:1; - unsigned int ncq_saw_dmas:1; - unsigned int ncq_saw_sdb:1; - u32 intr_mask; /* interrupts to enable */ - bool fbs_supported; /* set iff FBS is supported */ - bool fbs_enabled; /* set iff FBS is enabled */ - int fbs_last_dev; /* save FBS.DEV of last FIS */ - /* enclosure management info per PM slot */ - struct ahci_em_priv em_priv[EM_MAX_SLOTS]; }; -static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); -static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); -static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); -static int ahci_port_start(struct ata_port *ap); -static void ahci_port_stop(struct ata_port *ap); -static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc); -static void ahci_qc_prep(struct ata_queued_cmd *qc); -static void ahci_freeze(struct ata_port *ap); -static void ahci_thaw(struct ata_port *ap); -static void ahci_enable_fbs(struct ata_port *ap); -static void ahci_disable_fbs(struct ata_port *ap); -static void ahci_pmp_attach(struct ata_port *ap); -static void ahci_pmp_detach(struct ata_port *ap); -static int ahci_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline); -static int ahci_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); -static void ahci_postreset(struct ata_link *link, unsigned int *class); -static void ahci_error_handler(struct ata_port *ap); -static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); -static int ahci_port_resume(struct ata_port *ap); -static void ahci_dev_config(struct ata_device *dev); -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, - u32 opts); #ifdef CONFIG_PM -static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int ahci_pci_device_resume(struct pci_dev *pdev); #endif -static ssize_t ahci_activity_show(struct ata_device *dev, char *buf); -static ssize_t ahci_activity_store(struct ata_device *dev, - enum sw_activity val); -static void ahci_init_sw_activity(struct ata_link *link); - -static ssize_t ahci_show_host_caps(struct device *dev, - struct device_attribute *attr, char *buf); -static ssize_t ahci_show_host_cap2(struct device *dev, - struct device_attribute *attr, char *buf); -static ssize_t ahci_show_host_version(struct device *dev, - struct device_attribute *attr, char *buf); -static ssize_t ahci_show_port_cmd(struct device *dev, - struct device_attribute *attr, char *buf); - -static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); -static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); -static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); -static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); - -static struct device_attribute *ahci_shost_attrs[] = { - &dev_attr_link_power_management_policy, - &dev_attr_em_message_type, - &dev_attr_em_message, - &dev_attr_ahci_host_caps, - &dev_attr_ahci_host_cap2, - &dev_attr_ahci_host_version, - &dev_attr_ahci_port_cmd, - NULL -}; - -static struct device_attribute *ahci_sdev_attrs[] = { - &dev_attr_sw_activity, - &dev_attr_unload_heads, - NULL -}; - -static struct scsi_host_template ahci_sht = { - ATA_NCQ_SHT(DRV_NAME), - .can_queue = AHCI_MAX_CMDS - 1, - .sg_tablesize = AHCI_MAX_SG, - .dma_boundary = AHCI_DMA_BOUNDARY, - .shost_attrs = ahci_shost_attrs, - .sdev_attrs = ahci_sdev_attrs, -}; - -static struct ata_port_operations ahci_ops = { - .inherits = &sata_pmp_port_ops, - - .qc_defer = ahci_pmp_qc_defer, - .qc_prep = ahci_qc_prep, - .qc_issue = ahci_qc_issue, - .qc_fill_rtf = ahci_qc_fill_rtf, - - .freeze = ahci_freeze, - .thaw = ahci_thaw, - .softreset = ahci_softreset, - .hardreset = ahci_hardreset, - .postreset = ahci_postreset, - .pmp_softreset = ahci_softreset, - .error_handler = ahci_error_handler, - .post_internal_cmd = ahci_post_internal_cmd, - .dev_config = ahci_dev_config, - - .scr_read = ahci_scr_read, - .scr_write = ahci_scr_write, - .pmp_attach = ahci_pmp_attach, - .pmp_detach = ahci_pmp_detach, - - .enable_pm = ahci_enable_alpm, - .disable_pm = ahci_disable_alpm, - .em_show = ahci_led_show, - .em_store = ahci_led_store, - .sw_activity_show = ahci_activity_show, - .sw_activity_store = ahci_activity_store, -#ifdef CONFIG_PM - .port_suspend = ahci_port_suspend, - .port_resume = ahci_port_resume, -#endif - .port_start = ahci_port_start, - .port_stop = ahci_port_stop, -}; static struct ata_port_operations ahci_vt8251_ops = { .inherits = &ahci_ops, @@ -738,1944 +371,210 @@ static struct pci_driver ahci_pci_driver = { #endif }; -static int ahci_em_messages = 1; -module_param(ahci_em_messages, int, 0444); -/* add other LED protocol types when they become supported */ -MODULE_PARM_DESC(ahci_em_messages, - "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); - -#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) -static int marvell_enable; -#else -static int marvell_enable = 1; -#endif -module_param(marvell_enable, int, 0644); -MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); - - -static inline int ahci_nr_ports(u32 cap) -{ - return (cap & 0x1f) + 1; -} - -static inline void __iomem *__ahci_port_base(struct ata_host *host, - unsigned int port_no) -{ - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; - - return mmio + 0x100 + (port_no * 0x80); -} - -static inline void __iomem *ahci_port_base(struct ata_port *ap) -{ - return __ahci_port_base(ap->host, ap->port_no); -} - -static void ahci_enable_ahci(void __iomem *mmio) -{ - int i; - u32 tmp; - - /* turn on AHCI_EN */ - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_AHCI_EN) - return; - - /* Some controllers need AHCI_EN to be written multiple times. - * Try a few times before giving up. - */ - for (i = 0; i < 5; i++) { - tmp |= HOST_AHCI_EN; - writel(tmp, mmio + HOST_CTL); - tmp = readl(mmio + HOST_CTL); /* flush && sanity check */ - if (tmp & HOST_AHCI_EN) - return; - msleep(10); - } - - WARN_ON(1); -} - -static ssize_t ahci_show_host_caps(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = class_to_shost(dev); - struct ata_port *ap = ata_shost_to_port(shost); - struct ahci_host_priv *hpriv = ap->host->private_data; - - return sprintf(buf, "%x\n", hpriv->cap); -} - -static ssize_t ahci_show_host_cap2(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = class_to_shost(dev); - struct ata_port *ap = ata_shost_to_port(shost); - struct ahci_host_priv *hpriv = ap->host->private_data; - - return sprintf(buf, "%x\n", hpriv->cap2); -} - -static ssize_t ahci_show_host_version(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = class_to_shost(dev); - struct ata_port *ap = ata_shost_to_port(shost); - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *mmio = hpriv->mmio; - - return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION)); -} - -static ssize_t ahci_show_port_cmd(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = class_to_shost(dev); - struct ata_port *ap = ata_shost_to_port(shost); - void __iomem *port_mmio = ahci_port_base(ap); - - return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD)); -} - -/** - * ahci_save_initial_config - Save and fixup initial config values - * @dev: target AHCI device - * @hpriv: host private area to store config values - * @force_port_map: force port map to a specified value - * @mask_port_map: mask out particular bits from port map - * - * Some registers containing configuration info might be setup by - * BIOS and might be cleared on reset. This function saves the - * initial values of those registers into @hpriv such that they - * can be restored after controller reset. - * - * If inconsistent, config values are fixed up by this function. - * - * LOCKING: - * None. - */ -static void ahci_save_initial_config(struct device *dev, - struct ahci_host_priv *hpriv, - unsigned int force_port_map, - unsigned int mask_port_map) -{ - void __iomem *mmio = hpriv->mmio; - u32 cap, cap2, vers, port_map; - int i; - - /* make sure AHCI mode is enabled before accessing CAP */ - ahci_enable_ahci(mmio); - - /* Values prefixed with saved_ are written back to host after - * reset. Values without are used for driver operation. - */ - hpriv->saved_cap = cap = readl(mmio + HOST_CAP); - hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); - - /* CAP2 register is only defined for AHCI 1.2 and later */ - vers = readl(mmio + HOST_VERSION); - if ((vers >> 16) > 1 || - ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200)) - hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2); - else - hpriv->saved_cap2 = cap2 = 0; - - /* some chips have errata preventing 64bit use */ - if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { - dev_printk(KERN_INFO, dev, - "controller can't do 64bit DMA, forcing 32bit\n"); - cap &= ~HOST_CAP_64; - } - - if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) { - dev_printk(KERN_INFO, dev, - "controller can't do NCQ, turning off CAP_NCQ\n"); - cap &= ~HOST_CAP_NCQ; - } - - if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { - dev_printk(KERN_INFO, dev, - "controller can do NCQ, turning on CAP_NCQ\n"); - cap |= HOST_CAP_NCQ; - } - - if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { - dev_printk(KERN_INFO, dev, - "controller can't do PMP, turning off CAP_PMP\n"); - cap &= ~HOST_CAP_PMP; - } - - if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) { - dev_printk(KERN_INFO, dev, - "controller can't do SNTF, turning off CAP_SNTF\n"); - cap &= ~HOST_CAP_SNTF; - } - - if (force_port_map && port_map != force_port_map) { - dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n", - port_map, force_port_map); - port_map = force_port_map; - } - - if (mask_port_map) { - dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n", - port_map, - port_map & mask_port_map); - port_map &= mask_port_map; - } - - /* cross check port_map and cap.n_ports */ - if (port_map) { - int map_ports = 0; - - for (i = 0; i < AHCI_MAX_PORTS; i++) - if (port_map & (1 << i)) - map_ports++; - - /* If PI has more ports than n_ports, whine, clear - * port_map and let it be generated from n_ports. - */ - if (map_ports > ahci_nr_ports(cap)) { - dev_printk(KERN_WARNING, dev, - "implemented port map (0x%x) contains more " - "ports than nr_ports (%u), using nr_ports\n", - port_map, ahci_nr_ports(cap)); - port_map = 0; - } - } - - /* fabricate port_map from cap.nr_ports */ - if (!port_map) { - port_map = (1 << ahci_nr_ports(cap)) - 1; - dev_printk(KERN_WARNING, dev, - "forcing PORTS_IMPL to 0x%x\n", port_map); - - /* write the fixed up value to the PI register */ - hpriv->saved_port_map = port_map; - } - - /* record values to use during operation */ - hpriv->cap = cap; - hpriv->cap2 = cap2; - hpriv->port_map = port_map; -} - -static void ahci_pci_save_initial_config(struct pci_dev *pdev, - struct ahci_host_priv *hpriv) -{ - unsigned int force_port_map = 0; - unsigned int mask_port_map = 0; - - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { - dev_info(&pdev->dev, "JMB361 has only one port\n"); - force_port_map = 1; - } - - /* - * Temporary Marvell 6145 hack: PATA port presence - * is asserted through the standard AHCI port - * presence register, as bit 4 (counting from 0) - */ - if (hpriv->flags & AHCI_HFLAG_MV_PATA) { - if (pdev->device == 0x6121) - mask_port_map = 0x3; - else - mask_port_map = 0xf; - dev_info(&pdev->dev, - "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); - } - - ahci_save_initial_config(&pdev->dev, hpriv, force_port_map, - mask_port_map); -} - -/** - * ahci_restore_initial_config - Restore initial config - * @host: target ATA host - * - * Restore initial config stored by ahci_save_initial_config(). - * - * LOCKING: - * None. - */ -static void ahci_restore_initial_config(struct ata_host *host) -{ - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; - - writel(hpriv->saved_cap, mmio + HOST_CAP); - if (hpriv->saved_cap2) - writel(hpriv->saved_cap2, mmio + HOST_CAP2); - writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); - (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ -} - -static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) -{ - static const int offset[] = { - [SCR_STATUS] = PORT_SCR_STAT, - [SCR_CONTROL] = PORT_SCR_CTL, - [SCR_ERROR] = PORT_SCR_ERR, - [SCR_ACTIVE] = PORT_SCR_ACT, - [SCR_NOTIFICATION] = PORT_SCR_NTF, - }; - struct ahci_host_priv *hpriv = ap->host->private_data; - - if (sc_reg < ARRAY_SIZE(offset) && - (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF))) - return offset[sc_reg]; - return 0; -} - -static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - int offset = ahci_scr_offset(link->ap, sc_reg); - - if (offset) { - *val = readl(port_mmio + offset); - return 0; - } - return -EINVAL; -} - -static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - int offset = ahci_scr_offset(link->ap, sc_reg); - - if (offset) { - writel(val, port_mmio + offset); - return 0; - } - return -EINVAL; -} - -static void ahci_start_engine(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - u32 tmp; - - /* start DMA */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ -} - -static int ahci_stop_engine(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - - /* check if the HBA is idle */ - if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) - return 0; - - /* setting HBA to idle */ - tmp &= ~PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for engine to stop. This could be as long as 500 msec */ - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); - if (tmp & PORT_CMD_LIST_ON) - return -EIO; - - return 0; -} - -static void ahci_start_fis_rx(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ahci_host_priv *hpriv = ap->host->private_data; - struct ahci_port_priv *pp = ap->private_data; - u32 tmp; - - /* set FIS registers */ - if (hpriv->cap & HOST_CAP_64) - writel((pp->cmd_slot_dma >> 16) >> 16, - port_mmio + PORT_LST_ADDR_HI); - writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); - - if (hpriv->cap & HOST_CAP_64) - writel((pp->rx_fis_dma >> 16) >> 16, - port_mmio + PORT_FIS_ADDR_HI); - writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); - - /* enable FIS reception */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_FIS_RX; - writel(tmp, port_mmio + PORT_CMD); - - /* flush */ - readl(port_mmio + PORT_CMD); -} - -static int ahci_stop_fis_rx(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - u32 tmp; - - /* disable FIS reception */ - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~PORT_CMD_FIS_RX; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for completion, spec says 500ms, give it 1000 */ - tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, - PORT_CMD_FIS_ON, 10, 1000); - if (tmp & PORT_CMD_FIS_ON) - return -EBUSY; - - return 0; -} - -static void ahci_power_up(struct ata_port *ap) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - - cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; - - /* spin up device */ - if (hpriv->cap & HOST_CAP_SSS) { - cmd |= PORT_CMD_SPIN_UP; - writel(cmd, port_mmio + PORT_CMD); - } - - /* wake up link */ - writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); -} - -static void ahci_disable_alpm(struct ata_port *ap) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - struct ahci_port_priv *pp = ap->private_data; - - /* IPM bits should be disabled by libata-core */ - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); - - /* disable ALPM and ASP */ - cmd &= ~PORT_CMD_ASP; - cmd &= ~PORT_CMD_ALPE; - - /* force the interface back to active */ - cmd |= PORT_CMD_ICC_ACTIVE; - - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); - - /* wait 10ms to be sure we've come out of any low power state */ - msleep(10); - - /* clear out any PhyRdy stuff from interrupt status */ - writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT); - - /* go ahead and clean out PhyRdy Change from Serror too */ - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); - - /* - * Clear flag to indicate that we should ignore all PhyRdy - * state changes - */ - hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG; - - /* - * Enable interrupts on Phy Ready. - */ - pp->intr_mask |= PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); - - /* - * don't change the link pm policy - we can be called - * just to turn of link pm temporarily - */ -} - -static int ahci_enable_alpm(struct ata_port *ap, - enum link_pm policy) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - struct ahci_port_priv *pp = ap->private_data; - u32 asp; - - /* Make sure the host is capable of link power management */ - if (!(hpriv->cap & HOST_CAP_ALPM)) - return -EINVAL; - - switch (policy) { - case MAX_PERFORMANCE: - case NOT_AVAILABLE: - /* - * if we came here with NOT_AVAILABLE, - * it just means this is the first time we - * have tried to enable - default to max performance, - * and let the user go to lower power modes on request. - */ - ahci_disable_alpm(ap); - return 0; - case MIN_POWER: - /* configure HBA to enter SLUMBER */ - asp = PORT_CMD_ASP; - break; - case MEDIUM_POWER: - /* configure HBA to enter PARTIAL */ - asp = 0; - break; - default: - return -EINVAL; - } - - /* - * Disable interrupts on Phy Ready. This keeps us from - * getting woken up due to spurious phy ready interrupts - * TBD - Hot plug should be done via polling now, is - * that even supported? - */ - pp->intr_mask &= ~PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); - - /* - * Set a flag to indicate that we should ignore all PhyRdy - * state changes since these can happen now whenever we - * change link state - */ - hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG; - - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); - - /* - * Set ASP based on Policy - */ - cmd |= asp; - - /* - * Setting this bit will instruct the HBA to aggressively - * enter a lower power link state when it's appropriate and - * based on the value set above for ASP - */ - cmd |= PORT_CMD_ALPE; - - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); - - /* IPM bits should be set by libata-core */ - return 0; -} - -#ifdef CONFIG_PM -static void ahci_power_down(struct ata_port *ap) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd, scontrol; - - if (!(hpriv->cap & HOST_CAP_SSS)) - return; - - /* put device into listen mode, first set PxSCTL.DET to 0 */ - scontrol = readl(port_mmio + PORT_SCR_CTL); - scontrol &= ~0xf; - writel(scontrol, port_mmio + PORT_SCR_CTL); - - /* then set PxCMD.SUD to 0 */ - cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; - cmd &= ~PORT_CMD_SPIN_UP; - writel(cmd, port_mmio + PORT_CMD); -} -#endif - -static void ahci_start_port(struct ata_port *ap) -{ - struct ahci_port_priv *pp = ap->private_data; - struct ata_link *link; - struct ahci_em_priv *emp; - ssize_t rc; - int i; - - /* enable FIS reception */ - ahci_start_fis_rx(ap); - - /* enable DMA */ - ahci_start_engine(ap); - - /* turn on LEDs */ - if (ap->flags & ATA_FLAG_EM) { - ata_for_each_link(link, ap, EDGE) { - emp = &pp->em_priv[link->pmp]; - - /* EM Transmit bit maybe busy during init */ - for (i = 0; i < EM_MAX_RETRY; i++) { - rc = ahci_transmit_led_message(ap, - emp->led_state, - 4); - if (rc == -EBUSY) - msleep(1); - else - break; - } - } - } - - if (ap->flags & ATA_FLAG_SW_ACTIVITY) - ata_for_each_link(link, ap, EDGE) - ahci_init_sw_activity(link); - -} - -static int ahci_deinit_port(struct ata_port *ap, const char **emsg) -{ - int rc; - - /* disable DMA */ - rc = ahci_stop_engine(ap); - if (rc) { - *emsg = "failed to stop engine"; - return rc; - } - - /* disable FIS reception */ - rc = ahci_stop_fis_rx(ap); - if (rc) { - *emsg = "failed stop FIS RX"; - return rc; - } - - return 0; -} - -static int ahci_reset_controller(struct ata_host *host) -{ - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; - u32 tmp; - - /* we must be in AHCI mode, before using anything - * AHCI-specific, such as HOST_RESET. - */ - ahci_enable_ahci(mmio); - - /* global controller reset */ - if (!ahci_skip_host_reset) { - tmp = readl(mmio + HOST_CTL); - if ((tmp & HOST_RESET) == 0) { - writel(tmp | HOST_RESET, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - } - - /* - * to perform host reset, OS should set HOST_RESET - * and poll until this bit is read to be "0". - * reset must complete within 1 second, or - * the hardware should be considered fried. - */ - tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET, - HOST_RESET, 10, 1000); - - if (tmp & HOST_RESET) { - dev_printk(KERN_ERR, host->dev, - "controller reset failed (0x%x)\n", tmp); - return -EIO; - } - - /* turn on AHCI mode */ - ahci_enable_ahci(mmio); - - /* Some registers might be cleared on reset. Restore - * initial values. - */ - ahci_restore_initial_config(host); - } else - dev_printk(KERN_INFO, host->dev, - "skipping global host reset\n"); - - return 0; -} - -static int ahci_pci_reset_controller(struct ata_host *host) -{ - struct pci_dev *pdev = to_pci_dev(host->dev); - - ahci_reset_controller(host); - - if (pdev->vendor == PCI_VENDOR_ID_INTEL) { - struct ahci_host_priv *hpriv = host->private_data; - u16 tmp16; - - /* configure PCS */ - pci_read_config_word(pdev, 0x92, &tmp16); - if ((tmp16 & hpriv->port_map) != hpriv->port_map) { - tmp16 |= hpriv->port_map; - pci_write_config_word(pdev, 0x92, tmp16); - } - } - - return 0; -} - -static void ahci_sw_activity(struct ata_link *link) -{ - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - - if (!(link->flags & ATA_LFLAG_SW_ACTIVITY)) - return; - - emp->activity++; - if (!timer_pending(&emp->timer)) - mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10)); -} - -static void ahci_sw_activity_blink(unsigned long arg) -{ - struct ata_link *link = (struct ata_link *)arg; - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - unsigned long led_message = emp->led_state; - u32 activity_led_state; - unsigned long flags; - - led_message &= EM_MSG_LED_VALUE; - led_message |= ap->port_no | (link->pmp << 8); - - /* check to see if we've had activity. If so, - * toggle state of LED and reset timer. If not, - * turn LED to desired idle state. - */ - spin_lock_irqsave(ap->lock, flags); - if (emp->saved_activity != emp->activity) { - emp->saved_activity = emp->activity; - /* get the current LED state */ - activity_led_state = led_message & EM_MSG_LED_VALUE_ON; - - if (activity_led_state) - activity_led_state = 0; - else - activity_led_state = 1; - - /* clear old state */ - led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; - - /* toggle state */ - led_message |= (activity_led_state << 16); - mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); - } else { - /* switch to idle */ - led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; - if (emp->blink_policy == BLINK_OFF) - led_message |= (1 << 16); - } - spin_unlock_irqrestore(ap->lock, flags); - ahci_transmit_led_message(ap, led_message, 4); -} - -static void ahci_init_sw_activity(struct ata_link *link) -{ - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - - /* init activity stats, setup timer */ - emp->saved_activity = emp->activity = 0; - setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link); - - /* check our blink policy and set flag for link if it's enabled */ - if (emp->blink_policy) - link->flags |= ATA_LFLAG_SW_ACTIVITY; -} - -static int ahci_reset_em(struct ata_host *host) -{ - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; - u32 em_ctl; - - em_ctl = readl(mmio + HOST_EM_CTL); - if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST)) - return -EINVAL; - - writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL); - return 0; -} - -static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, - ssize_t size) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = hpriv->mmio; - u32 em_ctl; - u32 message[] = {0, 0}; - unsigned long flags; - int pmp; - struct ahci_em_priv *emp; - - /* get the slot number from the message */ - pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < EM_MAX_SLOTS) - emp = &pp->em_priv[pmp]; - else - return -EINVAL; - - spin_lock_irqsave(ap->lock, flags); - - /* - * if we are still busy transmitting a previous message, - * do not allow - */ - em_ctl = readl(mmio + HOST_EM_CTL); - if (em_ctl & EM_CTL_TM) { - spin_unlock_irqrestore(ap->lock, flags); - return -EBUSY; - } - - /* - * create message header - this is all zero except for - * the message size, which is 4 bytes. - */ - message[0] |= (4 << 8); - - /* ignore 0:4 of byte zero, fill in port info yourself */ - message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); - - /* write message to EM_LOC */ - writel(message[0], mmio + hpriv->em_loc); - writel(message[1], mmio + hpriv->em_loc+4); - - /* save off new led state for port/slot */ - emp->led_state = state; - - /* - * tell hardware to transmit the message - */ - writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); - - spin_unlock_irqrestore(ap->lock, flags); - return size; -} - -static ssize_t ahci_led_show(struct ata_port *ap, char *buf) -{ - struct ahci_port_priv *pp = ap->private_data; - struct ata_link *link; - struct ahci_em_priv *emp; - int rc = 0; - - ata_for_each_link(link, ap, EDGE) { - emp = &pp->em_priv[link->pmp]; - rc += sprintf(buf, "%lx\n", emp->led_state); - } - return rc; -} - -static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, - size_t size) -{ - int state; - int pmp; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp; - - state = simple_strtoul(buf, NULL, 0); - - /* get the slot number from the message */ - pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < EM_MAX_SLOTS) - emp = &pp->em_priv[pmp]; - else - return -EINVAL; - - /* mask off the activity bits if we are in sw_activity - * mode, user should turn off sw_activity before setting - * activity led through em_message - */ - if (emp->blink_policy) - state &= ~EM_MSG_LED_VALUE_ACTIVITY; - - return ahci_transmit_led_message(ap, state, size); -} - -static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) -{ - struct ata_link *link = dev->link; - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - u32 port_led_state = emp->led_state; - - /* save the desired Activity LED behavior */ - if (val == OFF) { - /* clear LFLAG */ - link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); - - /* set the LED to OFF */ - port_led_state &= EM_MSG_LED_VALUE_OFF; - port_led_state |= (ap->port_no | (link->pmp << 8)); - ahci_transmit_led_message(ap, port_led_state, 4); - } else { - link->flags |= ATA_LFLAG_SW_ACTIVITY; - if (val == BLINK_OFF) { - /* set LED to ON for idle */ - port_led_state &= EM_MSG_LED_VALUE_OFF; - port_led_state |= (ap->port_no | (link->pmp << 8)); - port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ - ahci_transmit_led_message(ap, port_led_state, 4); - } - } - emp->blink_policy = val; - return 0; -} - -static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) -{ - struct ata_link *link = dev->link; - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - - /* display the saved value of activity behavior for this - * disk. - */ - return sprintf(buf, "%d\n", emp->blink_policy); -} - -static void ahci_port_init(struct device *dev, struct ata_port *ap, - int port_no, void __iomem *mmio, - void __iomem *port_mmio) -{ - const char *emsg = NULL; - int rc; - u32 tmp; - - /* make sure port is not active */ - rc = ahci_deinit_port(ap, &emsg); - if (rc) - dev_warn(dev, "%s (%d)\n", emsg, rc); - - /* clear SError */ - tmp = readl(port_mmio + PORT_SCR_ERR); - VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* clear port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << port_no, mmio + HOST_IRQ_STAT); -} - -static void ahci_init_controller(struct ata_host *host) -{ - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; - int i; - void __iomem *port_mmio; - u32 tmp; - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - - port_mmio = ahci_port_base(ap); - if (ata_port_is_dummy(ap)) - continue; - - ahci_port_init(host->dev, ap, i, mmio, port_mmio); - } - - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); - writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); -} - -static void ahci_pci_init_controller(struct ata_host *host) -{ - struct ahci_host_priv *hpriv = host->private_data; - struct pci_dev *pdev = to_pci_dev(host->dev); - void __iomem *port_mmio; - u32 tmp; - int mv; - - if (hpriv->flags & AHCI_HFLAG_MV_PATA) { - if (pdev->device == 0x6121) - mv = 2; - else - mv = 4; - port_mmio = __ahci_port_base(host, mv); - - writel(0, port_mmio + PORT_IRQ_MASK); - - /* clear port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - } - - ahci_init_controller(host); -} - -static void ahci_dev_config(struct ata_device *dev) -{ - struct ahci_host_priv *hpriv = dev->link->ap->host->private_data; - - if (hpriv->flags & AHCI_HFLAG_SECT255) { - dev->max_sectors = 255; - ata_dev_printk(dev, KERN_INFO, - "SB600 AHCI: limiting to 255 sectors per cmd\n"); - } -} - -static unsigned int ahci_dev_classify(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ata_taskfile tf; - u32 tmp; - - tmp = readl(port_mmio + PORT_SIG); - tf.lbah = (tmp >> 24) & 0xff; - tf.lbam = (tmp >> 16) & 0xff; - tf.lbal = (tmp >> 8) & 0xff; - tf.nsect = (tmp) & 0xff; - - return ata_dev_classify(&tf); -} - -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, - u32 opts) -{ - dma_addr_t cmd_tbl_dma; - - cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; - - pp->cmd_slot[tag].opts = cpu_to_le32(opts); - pp->cmd_slot[tag].status = 0; - pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); - pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); -} - -static int ahci_kick_engine(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ahci_host_priv *hpriv = ap->host->private_data; - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - u32 tmp; - int busy, rc; - - /* stop engine */ - rc = ahci_stop_engine(ap); - if (rc) - goto out_restart; - - /* need to do CLO? - * always do CLO if PMP is attached (AHCI-1.3 9.2) - */ - busy = status & (ATA_BUSY | ATA_DRQ); - if (!busy && !sata_pmp_attached(ap)) { - rc = 0; - goto out_restart; - } - - if (!(hpriv->cap & HOST_CAP_CLO)) { - rc = -EOPNOTSUPP; - goto out_restart; - } - - /* perform CLO */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_CLO; - writel(tmp, port_mmio + PORT_CMD); - - rc = 0; - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); - if (tmp & PORT_CMD_CLO) - rc = -EIO; - - /* restart engine */ - out_restart: - ahci_start_engine(ap); - return rc; -} - -static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, - struct ata_taskfile *tf, int is_cmd, u16 flags, - unsigned long timeout_msec) -{ - const u32 cmd_fis_len = 5; /* five dwords */ - struct ahci_port_priv *pp = ap->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u8 *fis = pp->cmd_tbl; - u32 tmp; - - /* prep the command */ - ata_tf_to_fis(tf, pmp, is_cmd, fis); - ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); - - /* issue & wait */ - writel(1, port_mmio + PORT_CMD_ISSUE); - - if (timeout_msec) { - tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, - 1, timeout_msec); - if (tmp & 0x1) { - ahci_kick_engine(ap); - return -EBUSY; - } - } else - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ - - return 0; -} - -static int ahci_do_softreset(struct ata_link *link, unsigned int *class, - int pmp, unsigned long deadline, - int (*check_ready)(struct ata_link *link)) -{ - struct ata_port *ap = link->ap; - struct ahci_host_priv *hpriv = ap->host->private_data; - const char *reason = NULL; - unsigned long now, msecs; - struct ata_taskfile tf; - int rc; - - DPRINTK("ENTER\n"); - - /* prepare for SRST (AHCI-1.1 10.4.1) */ - rc = ahci_kick_engine(ap); - if (rc && rc != -EOPNOTSUPP) - ata_link_printk(link, KERN_WARNING, - "failed to reset engine (errno=%d)\n", rc); - - ata_tf_init(link->device, &tf); - - /* issue the first D2H Register FIS */ - msecs = 0; - now = jiffies; - if (time_after(now, deadline)) - msecs = jiffies_to_msecs(deadline - now); - - tf.ctl |= ATA_SRST; - if (ahci_exec_polled_cmd(ap, pmp, &tf, 0, - AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) { - rc = -EIO; - reason = "1st FIS failed"; - goto fail; - } - - /* spec says at least 5us, but be generous and sleep for 1ms */ - msleep(1); - - /* issue the second D2H Register FIS */ - tf.ctl &= ~ATA_SRST; - ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); - - /* wait for link to become ready */ - rc = ata_wait_after_reset(link, deadline, check_ready); - if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) { - /* - * Workaround for cases where link online status can't - * be trusted. Treat device readiness timeout as link - * offline. - */ - ata_link_printk(link, KERN_INFO, - "device not ready, treating as offline\n"); - *class = ATA_DEV_NONE; - } else if (rc) { - /* link occupied, -ENODEV too is an error */ - reason = "device not ready"; - goto fail; - } else - *class = ahci_dev_classify(ap); - - DPRINTK("EXIT, class=%u\n", *class); - return 0; - - fail: - ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason); - return rc; -} - -static int ahci_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - - return ata_check_ready(status); -} - -static int ahci_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - int pmp = sata_srst_pmp(link); - - DPRINTK("ENTER\n"); - - return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); -} - -static int ahci_sb600_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); - - /* - * There is no need to check TFDATA if BAD PMP is found due to HW bug, - * which can save timeout delay. - */ - if (irq_status & PORT_IRQ_BAD_PMP) - return -EIO; - - return ata_check_ready(status); -} - -static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - void __iomem *port_mmio = ahci_port_base(ap); - int pmp = sata_srst_pmp(link); - int rc; - u32 irq_sts; - - DPRINTK("ENTER\n"); - - rc = ahci_do_softreset(link, class, pmp, deadline, - ahci_sb600_check_ready); - - /* - * Soft reset fails on some ATI chips with IPMS set when PMP - * is enabled but SATA HDD/ODD is connected to SATA port, - * do soft reset again to port 0. - */ - if (rc == -EIO) { - irq_sts = readl(port_mmio + PORT_IRQ_STAT); - if (irq_sts & PORT_IRQ_BAD_PMP) { - ata_link_printk(link, KERN_WARNING, - "applying SB600 PMP SRST workaround " - "and retrying\n"); - rc = ahci_do_softreset(link, class, 0, deadline, - ahci_check_ready); - } - } - - return rc; -} - -static int ahci_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - bool online; - int rc; - - DPRINTK("ENTER\n"); - - ahci_stop_engine(ap); - - /* clear D2H reception area to properly wait for D2H FIS */ - ata_tf_init(link->device, &tf); - tf.command = 0x80; - ata_tf_to_fis(&tf, 0, 0, d2h_fis); - - rc = sata_link_hardreset(link, timing, deadline, &online, - ahci_check_ready); - - ahci_start_engine(ap); - - if (online) - *class = ahci_dev_classify(ap); - - DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); - return rc; -} - -static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - bool online; - int rc; - - DPRINTK("ENTER\n"); - - ahci_stop_engine(ap); - - rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), - deadline, &online, NULL); - - ahci_start_engine(ap); - - DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); - - /* vt8251 doesn't clear BSY on signature FIS reception, - * request follow-up softreset. - */ - return online ? -EAGAIN : rc; -} - -static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - bool online; - int rc; - - ahci_stop_engine(ap); - - /* clear D2H reception area to properly wait for D2H FIS */ - ata_tf_init(link->device, &tf); - tf.command = 0x80; - ata_tf_to_fis(&tf, 0, 0, d2h_fis); - - rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), - deadline, &online, NULL); - - ahci_start_engine(ap); - - /* The pseudo configuration device on SIMG4726 attached to - * ASUS P5W-DH Deluxe doesn't send signature FIS after - * hardreset if no device is attached to the first downstream - * port && the pseudo device locks up on SRST w/ PMP==0. To - * work around this, wait for !BSY only briefly. If BSY isn't - * cleared, perform CLO and proceed to IDENTIFY (achieved by - * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA). - * - * Wait for two seconds. Devices attached to downstream port - * which can't process the following IDENTIFY after this will - * have to be reset again. For most cases, this should - * suffice while making probing snappish enough. - */ - if (online) { - rc = ata_wait_after_reset(link, jiffies + 2 * HZ, - ahci_check_ready); - if (rc) - ahci_kick_engine(ap); - } - return rc; -} - -static void ahci_postreset(struct ata_link *link, unsigned int *class) -{ - struct ata_port *ap = link->ap; - void __iomem *port_mmio = ahci_port_base(ap); - u32 new_tmp, tmp; - - ata_std_postreset(link, class); - - /* Make sure port's ATAPI bit is set appropriately */ - new_tmp = tmp = readl(port_mmio + PORT_CMD); - if (*class == ATA_DEV_ATAPI) - new_tmp |= PORT_CMD_ATAPI; - else - new_tmp &= ~PORT_CMD_ATAPI; - if (new_tmp != tmp) { - writel(new_tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - } -} - -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) -{ - struct scatterlist *sg; - struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; - unsigned int si; - - VPRINTK("ENTER\n"); - - /* - * Next, the S/G list. - */ - for_each_sg(qc->sg, sg, qc->n_elem, si) { - dma_addr_t addr = sg_dma_address(sg); - u32 sg_len = sg_dma_len(sg); - - ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff); - ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); - ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1); - } - - return si; -} - -static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ahci_port_priv *pp = ap->private_data; - - if (!sata_pmp_attached(ap) || pp->fbs_enabled) - return ata_std_qc_defer(qc); - else - return sata_pmp_qc_defer_cmd_switch(qc); -} - -static void ahci_qc_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ahci_port_priv *pp = ap->private_data; - int is_atapi = ata_is_atapi(qc->tf.protocol); - void *cmd_tbl; - u32 opts; - const u32 cmd_fis_len = 5; /* five dwords */ - unsigned int n_elem; - - /* - * Fill in command table information. First, the header, - * a SATA Register - Host to Device command FIS. - */ - cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; - - ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); - if (is_atapi) { - memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); - memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); - } - - n_elem = 0; - if (qc->flags & ATA_QCFLAG_DMAMAP) - n_elem = ahci_fill_sg(qc, cmd_tbl); - - /* - * Fill in command slot information. - */ - opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12); - if (qc->tf.flags & ATA_TFLAG_WRITE) - opts |= AHCI_CMD_WRITE; - if (is_atapi) - opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; - - ahci_fill_cmd_slot(pp, qc->tag, opts); -} - -static void ahci_fbs_dec_intr(struct ata_port *ap) -{ - struct ahci_port_priv *pp = ap->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 fbs = readl(port_mmio + PORT_FBS); - int retries = 3; - - DPRINTK("ENTER\n"); - BUG_ON(!pp->fbs_enabled); - - /* time to wait for DEC is not specified by AHCI spec, - * add a retry loop for safety. - */ - writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS); - fbs = readl(port_mmio + PORT_FBS); - while ((fbs & PORT_FBS_DEC) && retries--) { - udelay(1); - fbs = readl(port_mmio + PORT_FBS); - } - - if (fbs & PORT_FBS_DEC) - dev_printk(KERN_ERR, ap->host->dev, - "failed to clear device error\n"); -} - -static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - struct ahci_port_priv *pp = ap->private_data; - struct ata_eh_info *host_ehi = &ap->link.eh_info; - struct ata_link *link = NULL; - struct ata_queued_cmd *active_qc; - struct ata_eh_info *active_ehi; - bool fbs_need_dec = false; - u32 serror; - - /* determine active link with error */ - if (pp->fbs_enabled) { - void __iomem *port_mmio = ahci_port_base(ap); - u32 fbs = readl(port_mmio + PORT_FBS); - int pmp = fbs >> PORT_FBS_DWE_OFFSET; - - if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) && - ata_link_online(&ap->pmp_link[pmp])) { - link = &ap->pmp_link[pmp]; - fbs_need_dec = true; - } - - } else - ata_for_each_link(link, ap, EDGE) - if (ata_link_active(link)) - break; - - if (!link) - link = &ap->link; - - active_qc = ata_qc_from_tag(ap, link->active_tag); - active_ehi = &link->eh_info; - - /* record irq stat */ - ata_ehi_clear_desc(host_ehi); - ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); - - /* AHCI needs SError cleared; otherwise, it might lock up */ - ahci_scr_read(&ap->link, SCR_ERROR, &serror); - ahci_scr_write(&ap->link, SCR_ERROR, serror); - host_ehi->serror |= serror; - - /* some controllers set IRQ_IF_ERR on device errors, ignore it */ - if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR) - irq_stat &= ~PORT_IRQ_IF_ERR; - - if (irq_stat & PORT_IRQ_TF_ERR) { - /* If qc is active, charge it; otherwise, the active - * link. There's no active qc on NCQ errors. It will - * be determined by EH by reading log page 10h. - */ - if (active_qc) - active_qc->err_mask |= AC_ERR_DEV; - else - active_ehi->err_mask |= AC_ERR_DEV; - - if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL) - host_ehi->serror &= ~SERR_INTERNAL; - } - - if (irq_stat & PORT_IRQ_UNK_FIS) { - u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); - - active_ehi->err_mask |= AC_ERR_HSM; - active_ehi->action |= ATA_EH_RESET; - ata_ehi_push_desc(active_ehi, - "unknown FIS %08x %08x %08x %08x" , - unk[0], unk[1], unk[2], unk[3]); - } - - if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) { - active_ehi->err_mask |= AC_ERR_HSM; - active_ehi->action |= ATA_EH_RESET; - ata_ehi_push_desc(active_ehi, "incorrect PMP"); - } - - if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { - host_ehi->err_mask |= AC_ERR_HOST_BUS; - host_ehi->action |= ATA_EH_RESET; - ata_ehi_push_desc(host_ehi, "host bus error"); - } - - if (irq_stat & PORT_IRQ_IF_ERR) { - if (fbs_need_dec) - active_ehi->err_mask |= AC_ERR_DEV; - else { - host_ehi->err_mask |= AC_ERR_ATA_BUS; - host_ehi->action |= ATA_EH_RESET; - } - - ata_ehi_push_desc(host_ehi, "interface fatal error"); - } - - if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { - ata_ehi_hotplugged(host_ehi); - ata_ehi_push_desc(host_ehi, "%s", - irq_stat & PORT_IRQ_CONNECT ? - "connection status changed" : "PHY RDY changed"); - } - - /* okay, let's hand over to EH */ - - if (irq_stat & PORT_IRQ_FREEZE) - ata_port_freeze(ap); - else if (fbs_need_dec) { - ata_link_abort(link); - ahci_fbs_dec_intr(ap); - } else - ata_port_abort(ap); -} - -static void ahci_port_intr(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ata_eh_info *ehi = &ap->link.eh_info; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_host_priv *hpriv = ap->host->private_data; - int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING); - u32 status, qc_active = 0; - int rc; - - status = readl(port_mmio + PORT_IRQ_STAT); - writel(status, port_mmio + PORT_IRQ_STAT); - - /* ignore BAD_PMP while resetting */ - if (unlikely(resetting)) - status &= ~PORT_IRQ_BAD_PMP; - - /* If we are getting PhyRdy, this is - * just a power state change, we should - * clear out this, plus the PhyRdy/Comm - * Wake bits from Serror - */ - if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) && - (status & PORT_IRQ_PHYRDY)) { - status &= ~PORT_IRQ_PHYRDY; - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); - } - - if (unlikely(status & PORT_IRQ_ERROR)) { - ahci_error_intr(ap, status); - return; - } - - if (status & PORT_IRQ_SDB_FIS) { - /* If SNotification is available, leave notification - * handling to sata_async_notification(). If not, - * emulate it by snooping SDB FIS RX area. - * - * Snooping FIS RX area is probably cheaper than - * poking SNotification but some constrollers which - * implement SNotification, ICH9 for example, don't - * store AN SDB FIS into receive area. - */ - if (hpriv->cap & HOST_CAP_SNTF) - sata_async_notification(ap); - else { - /* If the 'N' bit in word 0 of the FIS is set, - * we just received asynchronous notification. - * Tell libata about it. - * - * Lack of SNotification should not appear in - * ahci 1.2, so the workaround is unnecessary - * when FBS is enabled. - */ - if (pp->fbs_enabled) - WARN_ON_ONCE(1); - else { - const __le32 *f = pp->rx_fis + RX_FIS_SDB; - u32 f0 = le32_to_cpu(f[0]); - if (f0 & (1 << 15)) - sata_async_notification(ap); - } - } - } - - /* pp->active_link is not reliable once FBS is enabled, both - * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because - * NCQ and non-NCQ commands may be in flight at the same time. - */ - if (pp->fbs_enabled) { - if (ap->qc_active) { - qc_active = readl(port_mmio + PORT_SCR_ACT); - qc_active |= readl(port_mmio + PORT_CMD_ISSUE); - } - } else { - /* pp->active_link is valid iff any command is in flight */ - if (ap->qc_active && pp->active_link->sactive) - qc_active = readl(port_mmio + PORT_SCR_ACT); - else - qc_active = readl(port_mmio + PORT_CMD_ISSUE); - } - - rc = ata_qc_complete_multiple(ap, qc_active); - - /* while resetting, invalid completions are expected */ - if (unlikely(rc < 0 && !resetting)) { - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_RESET; - ata_port_freeze(ap); - } -} - -static irqreturn_t ahci_interrupt(int irq, void *dev_instance) -{ - struct ata_host *host = dev_instance; - struct ahci_host_priv *hpriv; - unsigned int i, handled = 0; - void __iomem *mmio; - u32 irq_stat, irq_masked; - - VPRINTK("ENTER\n"); - - hpriv = host->private_data; - mmio = hpriv->mmio; - - /* sigh. 0xffffffff is a valid return from h/w */ - irq_stat = readl(mmio + HOST_IRQ_STAT); - if (!irq_stat) - return IRQ_NONE; - - irq_masked = irq_stat & hpriv->port_map; +#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) +static int marvell_enable; +#else +static int marvell_enable = 1; +#endif +module_param(marvell_enable, int, 0644); +MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); - spin_lock(&host->lock); - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap; - - if (!(irq_masked & (1 << i))) - continue; - - ap = host->ports[i]; - if (ap) { - ahci_port_intr(ap); - VPRINTK("port %u\n", i); - } else { - VPRINTK("port %u (no irq)\n", i); - if (ata_ratelimit()) - dev_printk(KERN_WARNING, host->dev, - "interrupt on disabled port %u\n", i); - } +static void ahci_pci_save_initial_config(struct pci_dev *pdev, + struct ahci_host_priv *hpriv) +{ + unsigned int force_port_map = 0; + unsigned int mask_port_map = 0; - handled = 1; + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { + dev_info(&pdev->dev, "JMB361 has only one port\n"); + force_port_map = 1; } - /* HOST_IRQ_STAT behaves as level triggered latch meaning that - * it should be cleared after all the port events are cleared; - * otherwise, it will raise a spurious interrupt after each - * valid one. Please read section 10.6.2 of ahci 1.1 for more - * information. - * - * Also, use the unmasked value to clear interrupt as spurious - * pending event on a dummy port might cause screaming IRQ. + /* + * Temporary Marvell 6145 hack: PATA port presence + * is asserted through the standard AHCI port + * presence register, as bit 4 (counting from 0) */ - writel(irq_stat, mmio + HOST_IRQ_STAT); - - spin_unlock(&host->lock); - - VPRINTK("EXIT\n"); + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { + if (pdev->device == 0x6121) + mask_port_map = 0x3; + else + mask_port_map = 0xf; + dev_info(&pdev->dev, + "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); + } - return IRQ_RETVAL(handled); + ahci_save_initial_config(&pdev->dev, hpriv, force_port_map, + mask_port_map); } -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) +static int ahci_pci_reset_controller(struct ata_host *host) { - struct ata_port *ap = qc->ap; - void __iomem *port_mmio = ahci_port_base(ap); - struct ahci_port_priv *pp = ap->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); - /* Keep track of the currently active link. It will be used - * in completion path to determine whether NCQ phase is in - * progress. - */ - pp->active_link = qc->dev->link; + ahci_reset_controller(host); - if (qc->tf.protocol == ATA_PROT_NCQ) - writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + struct ahci_host_priv *hpriv = host->private_data; + u16 tmp16; - if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) { - u32 fbs = readl(port_mmio + PORT_FBS); - fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC); - fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; - writel(fbs, port_mmio + PORT_FBS); - pp->fbs_last_dev = qc->dev->link->pmp; + /* configure PCS */ + pci_read_config_word(pdev, 0x92, &tmp16); + if ((tmp16 & hpriv->port_map) != hpriv->port_map) { + tmp16 |= hpriv->port_map; + pci_write_config_word(pdev, 0x92, tmp16); + } } - writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); - - ahci_sw_activity(qc->dev->link); - return 0; } -static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) -{ - struct ahci_port_priv *pp = qc->ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - - if (pp->fbs_enabled) - d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; - - ata_tf_from_fis(d2h_fis, &qc->result_tf); - return true; -} - -static void ahci_freeze(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - - /* turn IRQ off */ - writel(0, port_mmio + PORT_IRQ_MASK); -} - -static void ahci_thaw(struct ata_port *ap) +static void ahci_pci_init_controller(struct ata_host *host) { - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *mmio = hpriv->mmio; - void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_host_priv *hpriv = host->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); + void __iomem *port_mmio; u32 tmp; - struct ahci_port_priv *pp = ap->private_data; + int mv; - /* clear IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - writel(tmp, port_mmio + PORT_IRQ_STAT); - writel(1 << ap->port_no, mmio + HOST_IRQ_STAT); + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { + if (pdev->device == 0x6121) + mv = 2; + else + mv = 4; + port_mmio = __ahci_port_base(host, mv); - /* turn IRQ back on */ - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); -} + writel(0, port_mmio + PORT_IRQ_MASK); -static void ahci_error_handler(struct ata_port *ap) -{ - if (!(ap->pflags & ATA_PFLAG_FROZEN)) { - /* restart engine */ - ahci_stop_engine(ap); - ahci_start_engine(ap); + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); } - sata_pmp_error_handler(ap); + ahci_init_controller(host); } -static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) +static int ahci_sb600_check_ready(struct ata_link *link) { - struct ata_port *ap = qc->ap; + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); + + /* + * There is no need to check TFDATA if BAD PMP is found due to HW bug, + * which can save timeout delay. + */ + if (irq_status & PORT_IRQ_BAD_PMP) + return -EIO; - /* make DMA engine forget about the failed command */ - if (qc->flags & ATA_QCFLAG_FAILED) - ahci_kick_engine(ap); + return ata_check_ready(status); } -static void ahci_enable_fbs(struct ata_port *ap) +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { - struct ahci_port_priv *pp = ap->private_data; + struct ata_port *ap = link->ap; void __iomem *port_mmio = ahci_port_base(ap); - u32 fbs; + int pmp = sata_srst_pmp(link); int rc; + u32 irq_sts; - if (!pp->fbs_supported) - return; - - fbs = readl(port_mmio + PORT_FBS); - if (fbs & PORT_FBS_EN) { - pp->fbs_enabled = true; - pp->fbs_last_dev = -1; /* initialization */ - return; - } + DPRINTK("ENTER\n"); - rc = ahci_stop_engine(ap); - if (rc) - return; + rc = ahci_do_softreset(link, class, pmp, deadline, + ahci_sb600_check_ready); - writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); - fbs = readl(port_mmio + PORT_FBS); - if (fbs & PORT_FBS_EN) { - dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n"); - pp->fbs_enabled = true; - pp->fbs_last_dev = -1; /* initialization */ - } else - dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n"); + /* + * Soft reset fails on some ATI chips with IPMS set when PMP + * is enabled but SATA HDD/ODD is connected to SATA port, + * do soft reset again to port 0. + */ + if (rc == -EIO) { + irq_sts = readl(port_mmio + PORT_IRQ_STAT); + if (irq_sts & PORT_IRQ_BAD_PMP) { + ata_link_printk(link, KERN_WARNING, + "applying SB600 PMP SRST workaround " + "and retrying\n"); + rc = ahci_do_softreset(link, class, 0, deadline, + ahci_check_ready); + } + } - ahci_start_engine(ap); + return rc; } -static void ahci_disable_fbs(struct ata_port *ap) +static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { - struct ahci_port_priv *pp = ap->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 fbs; + struct ata_port *ap = link->ap; + bool online; int rc; - if (!pp->fbs_supported) - return; - - fbs = readl(port_mmio + PORT_FBS); - if ((fbs & PORT_FBS_EN) == 0) { - pp->fbs_enabled = false; - return; - } + DPRINTK("ENTER\n"); - rc = ahci_stop_engine(ap); - if (rc) - return; + ahci_stop_engine(ap); - writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS); - fbs = readl(port_mmio + PORT_FBS); - if (fbs & PORT_FBS_EN) - dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n"); - else { - dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n"); - pp->fbs_enabled = false; - } + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), + deadline, &online, NULL); ahci_start_engine(ap); -} - -static void ahci_pmp_attach(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ahci_port_priv *pp = ap->private_data; - u32 cmd; - - cmd = readl(port_mmio + PORT_CMD); - cmd |= PORT_CMD_PMP; - writel(cmd, port_mmio + PORT_CMD); - ahci_enable_fbs(ap); + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); - pp->intr_mask |= PORT_IRQ_BAD_PMP; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + /* vt8251 doesn't clear BSY on signature FIS reception, + * request follow-up softreset. + */ + return online ? -EAGAIN : rc; } -static void ahci_pmp_detach(struct ata_port *ap) +static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { - void __iomem *port_mmio = ahci_port_base(ap); + struct ata_port *ap = link->ap; struct ahci_port_priv *pp = ap->private_data; - u32 cmd; - - ahci_disable_fbs(ap); - - cmd = readl(port_mmio + PORT_CMD); - cmd &= ~PORT_CMD_PMP; - writel(cmd, port_mmio + PORT_CMD); - - pp->intr_mask &= ~PORT_IRQ_BAD_PMP; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); -} + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + int rc; -static int ahci_port_resume(struct ata_port *ap) -{ - ahci_power_up(ap); - ahci_start_port(ap); + ahci_stop_engine(ap); - if (sata_pmp_attached(ap)) - ahci_pmp_attach(ap); - else - ahci_pmp_detach(ap); + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = 0x80; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); - return 0; -} + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), + deadline, &online, NULL); -#ifdef CONFIG_PM -static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) -{ - const char *emsg = NULL; - int rc; + ahci_start_engine(ap); - rc = ahci_deinit_port(ap, &emsg); - if (rc == 0) - ahci_power_down(ap); - else { - ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); - ahci_start_port(ap); + /* The pseudo configuration device on SIMG4726 attached to + * ASUS P5W-DH Deluxe doesn't send signature FIS after + * hardreset if no device is attached to the first downstream + * port && the pseudo device locks up on SRST w/ PMP==0. To + * work around this, wait for !BSY only briefly. If BSY isn't + * cleared, perform CLO and proceed to IDENTIFY (achieved by + * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA). + * + * Wait for two seconds. Devices attached to downstream port + * which can't process the following IDENTIFY after this will + * have to be reset again. For most cases, this should + * suffice while making probing snappish enough. + */ + if (online) { + rc = ata_wait_after_reset(link, jiffies + 2 * HZ, + ahci_check_ready); + if (rc) + ahci_kick_engine(ap); } - return rc; } +#ifdef CONFIG_PM static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct ata_host *host = dev_get_drvdata(&pdev->dev); @@ -2727,92 +626,6 @@ static int ahci_pci_device_resume(struct pci_dev *pdev) } #endif -static int ahci_port_start(struct ata_port *ap) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - struct device *dev = ap->host->dev; - struct ahci_port_priv *pp; - void *mem; - dma_addr_t mem_dma; - size_t dma_sz, rx_fis_sz; - - pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); - if (!pp) - return -ENOMEM; - - /* check FBS capability */ - if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd = readl(port_mmio + PORT_CMD); - if (cmd & PORT_CMD_FBSCP) - pp->fbs_supported = true; - else - dev_printk(KERN_WARNING, dev, - "The port is not capable of FBS\n"); - } - - if (pp->fbs_supported) { - dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; - rx_fis_sz = AHCI_RX_FIS_SZ * 16; - } else { - dma_sz = AHCI_PORT_PRIV_DMA_SZ; - rx_fis_sz = AHCI_RX_FIS_SZ; - } - - mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); - if (!mem) - return -ENOMEM; - memset(mem, 0, dma_sz); - - /* - * First item in chunk of DMA memory: 32-slot command table, - * 32 bytes each in size - */ - pp->cmd_slot = mem; - pp->cmd_slot_dma = mem_dma; - - mem += AHCI_CMD_SLOT_SZ; - mem_dma += AHCI_CMD_SLOT_SZ; - - /* - * Second item: Received-FIS area - */ - pp->rx_fis = mem; - pp->rx_fis_dma = mem_dma; - - mem += rx_fis_sz; - mem_dma += rx_fis_sz; - - /* - * Third item: data area for storing a single command - * and its scatter-gather table - */ - pp->cmd_tbl = mem; - pp->cmd_tbl_dma = mem_dma; - - /* - * Save off initial list of interrupts to be enabled. - * This could be changed later - */ - pp->intr_mask = DEF_PORT_IRQ; - - ap->private_data = pp; - - /* engage engines, captain */ - return ahci_port_resume(ap); -} - -static void ahci_port_stop(struct ata_port *ap) -{ - const char *emsg = NULL; - int rc; - - /* de-initialize port */ - rc = ahci_deinit_port(ap, &emsg); - if (rc) - ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); -} - static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) { int rc; @@ -2845,74 +658,6 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) return 0; } -static void ahci_print_info(struct ata_host *host, const char *scc_s) -{ - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; - u32 vers, cap, cap2, impl, speed; - const char *speed_s; - - vers = readl(mmio + HOST_VERSION); - cap = hpriv->cap; - cap2 = hpriv->cap2; - impl = hpriv->port_map; - - speed = (cap >> 20) & 0xf; - if (speed == 1) - speed_s = "1.5"; - else if (speed == 2) - speed_s = "3"; - else if (speed == 3) - speed_s = "6"; - else - speed_s = "?"; - - dev_info(host->dev, - "AHCI %02x%02x.%02x%02x " - "%u slots %u ports %s Gbps 0x%x impl %s mode\n" - , - - (vers >> 24) & 0xff, - (vers >> 16) & 0xff, - (vers >> 8) & 0xff, - vers & 0xff, - - ((cap >> 8) & 0x1f) + 1, - (cap & 0x1f) + 1, - speed_s, - impl, - scc_s); - - dev_info(host->dev, - "flags: " - "%s%s%s%s%s%s%s" - "%s%s%s%s%s%s%s" - "%s%s%s%s%s%s\n" - , - - cap & HOST_CAP_64 ? "64bit " : "", - cap & HOST_CAP_NCQ ? "ncq " : "", - cap & HOST_CAP_SNTF ? "sntf " : "", - cap & HOST_CAP_MPS ? "ilck " : "", - cap & HOST_CAP_SSS ? "stag " : "", - cap & HOST_CAP_ALPM ? "pm " : "", - cap & HOST_CAP_LED ? "led " : "", - cap & HOST_CAP_CLO ? "clo " : "", - cap & HOST_CAP_ONLY ? "only " : "", - cap & HOST_CAP_PMP ? "pmp " : "", - cap & HOST_CAP_FBS ? "fbs " : "", - cap & HOST_CAP_PIO_MULTI ? "pio " : "", - cap & HOST_CAP_SSC ? "slum " : "", - cap & HOST_CAP_PART ? "part " : "", - cap & HOST_CAP_CCC ? "ccc " : "", - cap & HOST_CAP_EMS ? "ems " : "", - cap & HOST_CAP_SXS ? "sxs " : "", - cap2 & HOST_CAP2_APST ? "apst " : "", - cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "", - cap2 & HOST_CAP2_BOH ? "boh " : "" - ); -} - static void ahci_pci_print_info(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); @@ -3270,29 +1015,6 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) {} #endif -static void ahci_set_em_messages(struct ahci_host_priv *hpriv, - struct ata_port_info *pi) -{ - u8 messages; - void __iomem *mmio = hpriv->mmio; - u32 em_loc = readl(mmio + HOST_EM_LOC); - u32 em_ctl = readl(mmio + HOST_EM_CTL); - - if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS)) - return; - - messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; - - /* we only support LED message type right now */ - if ((messages & 0x01) && (ahci_em_messages == 1)) { - /* store em_loc */ - hpriv->em_loc = ((em_loc >> 16) * 4); - pi->flags |= ATA_FLAG_EM; - if (!(em_ctl & EM_CTL_ALHD)) - pi->flags |= ATA_FLAG_SW_ACTIVITY; - } -} - static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; -- cgit v1.2.3-55-g7522