From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/char/ipmi/Kconfig | 67 + drivers/char/ipmi/Makefile | 15 + drivers/char/ipmi/ipmi_bt_sm.c | 513 ++++++ drivers/char/ipmi/ipmi_devintf.c | 582 +++++++ drivers/char/ipmi/ipmi_kcs_sm.c | 500 ++++++ drivers/char/ipmi/ipmi_msghandler.c | 3174 +++++++++++++++++++++++++++++++++++ drivers/char/ipmi/ipmi_poweroff.c | 549 ++++++ drivers/char/ipmi/ipmi_si_intf.c | 2359 ++++++++++++++++++++++++++ drivers/char/ipmi/ipmi_si_sm.h | 120 ++ drivers/char/ipmi/ipmi_smic_sm.c | 599 +++++++ drivers/char/ipmi/ipmi_watchdog.c | 1068 ++++++++++++ 11 files changed, 9546 insertions(+) create mode 100644 drivers/char/ipmi/Kconfig create mode 100644 drivers/char/ipmi/Makefile create mode 100644 drivers/char/ipmi/ipmi_bt_sm.c create mode 100644 drivers/char/ipmi/ipmi_devintf.c create mode 100644 drivers/char/ipmi/ipmi_kcs_sm.c create mode 100644 drivers/char/ipmi/ipmi_msghandler.c create mode 100644 drivers/char/ipmi/ipmi_poweroff.c create mode 100644 drivers/char/ipmi/ipmi_si_intf.c create mode 100644 drivers/char/ipmi/ipmi_si_sm.h create mode 100644 drivers/char/ipmi/ipmi_smic_sm.c create mode 100644 drivers/char/ipmi/ipmi_watchdog.c (limited to 'drivers/char/ipmi') diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig new file mode 100644 index 000000000000..a6dcb2918157 --- /dev/null +++ b/drivers/char/ipmi/Kconfig @@ -0,0 +1,67 @@ +# +# IPMI device configuration +# + +menu "IPMI" +config IPMI_HANDLER + tristate 'IPMI top-level message handler' + help + This enables the central IPMI message handler, required for IPMI + to work. + + IPMI is a standard for managing sensors (temperature, + voltage, etc.) in a system. + + See for more details on the driver. + + If unsure, say N. + +config IPMI_PANIC_EVENT + bool 'Generate a panic event to all BMCs on a panic' + depends on IPMI_HANDLER + help + When a panic occurs, this will cause the IPMI message handler to + generate an IPMI event describing the panic to each interface + registered with the message handler. + +config IPMI_PANIC_STRING + bool 'Generate OEM events containing the panic string' + depends on IPMI_PANIC_EVENT + help + When a panic occurs, this will cause the IPMI message handler to + generate IPMI OEM type f0 events holding the IPMB address of the + panic generator (byte 4 of the event), a sequence number for the + string (byte 5 of the event) and part of the string (the rest of the + event). Bytes 1, 2, and 3 are the normal usage for an OEM event. + You can fetch these events and use the sequence numbers to piece the + string together. + +config IPMI_DEVICE_INTERFACE + tristate 'Device interface for IPMI' + depends on IPMI_HANDLER + help + This provides an IOCTL interface to the IPMI message handler so + userland processes may use IPMI. It supports poll() and select(). + +config IPMI_SI + tristate 'IPMI System Interface handler' + depends on IPMI_HANDLER + help + Provides a driver for System Interfaces (KCS, SMIC, BT). + Currently, only KCS and SMIC are supported. If + you are using IPMI, you should probably say "y" here. + +config IPMI_WATCHDOG + tristate 'IPMI Watchdog Timer' + depends on IPMI_HANDLER + help + This enables the IPMI watchdog timer. + +config IPMI_POWEROFF + tristate 'IPMI Poweroff' + depends on IPMI_HANDLER + help + This enables a function to power off the system with IPMI if + the IPMI management controller is capable of this. + +endmenu diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile new file mode 100644 index 000000000000..553f0a408eda --- /dev/null +++ b/drivers/char/ipmi/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for the ipmi drivers. +# + +ipmi_si-objs := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o + +obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o +obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o +obj-$(CONFIG_IPMI_SI) += ipmi_si.o +obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o +obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o + +ipmi_si.o: $(ipmi_si-objs) + $(LD) -r -o $@ $(ipmi_si-objs) + diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c new file mode 100644 index 000000000000..225b330115bb --- /dev/null +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -0,0 +1,513 @@ +/* + * ipmi_bt_sm.c + * + * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part + * of the driver architecture at http://sourceforge.net/project/openipmi + * + * Author: Rocky Craig + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include /* For printk. */ +#include +#include /* for completion codes */ +#include "ipmi_si_sm.h" + +#define IPMI_BT_VERSION "v33" + +static int bt_debug = 0x00; /* Production value 0, see following flags */ + +#define BT_DEBUG_ENABLE 1 +#define BT_DEBUG_MSG 2 +#define BT_DEBUG_STATES 4 + +/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds, + and 64 byte buffers. However, one HP implementation wants 255 bytes of + buffer (with a documented message of 160 bytes) so go for the max. + Since the Open IPMI architecture is single-message oriented at this + stage, the queue depth of BT is of no concern. */ + +#define BT_NORMAL_TIMEOUT 2000000 /* seconds in microseconds */ +#define BT_RETRY_LIMIT 2 +#define BT_RESET_DELAY 6000000 /* 6 seconds after warm reset */ + +enum bt_states { + BT_STATE_IDLE, + BT_STATE_XACTION_START, + BT_STATE_WRITE_BYTES, + BT_STATE_WRITE_END, + BT_STATE_WRITE_CONSUME, + BT_STATE_B2H_WAIT, + BT_STATE_READ_END, + BT_STATE_RESET1, /* These must come last */ + BT_STATE_RESET2, + BT_STATE_RESET3, + BT_STATE_RESTART, + BT_STATE_HOSED +}; + +struct si_sm_data { + enum bt_states state; + enum bt_states last_state; /* assist printing and resets */ + unsigned char seq; /* BT sequence number */ + struct si_sm_io *io; + unsigned char write_data[IPMI_MAX_MSG_LENGTH]; + int write_count; + unsigned char read_data[IPMI_MAX_MSG_LENGTH]; + int read_count; + int truncated; + long timeout; + unsigned int error_retries; /* end of "common" fields */ + int nonzero_status; /* hung BMCs stay all 0 */ +}; + +#define BT_CLR_WR_PTR 0x01 /* See IPMI 1.5 table 11.6.4 */ +#define BT_CLR_RD_PTR 0x02 +#define BT_H2B_ATN 0x04 +#define BT_B2H_ATN 0x08 +#define BT_SMS_ATN 0x10 +#define BT_OEM0 0x20 +#define BT_H_BUSY 0x40 +#define BT_B_BUSY 0x80 + +/* Some bits are toggled on each write: write once to set it, once + more to clear it; writing a zero does nothing. To absolutely + clear it, check its state and write if set. This avoids the "get + current then use as mask" scheme to modify one bit. Note that the + variable "bt" is hardcoded into these macros. */ + +#define BT_STATUS bt->io->inputb(bt->io, 0) +#define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x) + +#define BMC2HOST bt->io->inputb(bt->io, 1) +#define HOST2BMC(x) bt->io->outputb(bt->io, 1, x) + +#define BT_INTMASK_R bt->io->inputb(bt->io, 2) +#define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x) + +/* Convenience routines for debugging. These are not multi-open safe! + Note the macros have hardcoded variables in them. */ + +static char *state2txt(unsigned char state) +{ + switch (state) { + case BT_STATE_IDLE: return("IDLE"); + case BT_STATE_XACTION_START: return("XACTION"); + case BT_STATE_WRITE_BYTES: return("WR_BYTES"); + case BT_STATE_WRITE_END: return("WR_END"); + case BT_STATE_WRITE_CONSUME: return("WR_CONSUME"); + case BT_STATE_B2H_WAIT: return("B2H_WAIT"); + case BT_STATE_READ_END: return("RD_END"); + case BT_STATE_RESET1: return("RESET1"); + case BT_STATE_RESET2: return("RESET2"); + case BT_STATE_RESET3: return("RESET3"); + case BT_STATE_RESTART: return("RESTART"); + case BT_STATE_HOSED: return("HOSED"); + } + return("BAD STATE"); +} +#define STATE2TXT state2txt(bt->state) + +static char *status2txt(unsigned char status, char *buf) +{ + strcpy(buf, "[ "); + if (status & BT_B_BUSY) strcat(buf, "B_BUSY "); + if (status & BT_H_BUSY) strcat(buf, "H_BUSY "); + if (status & BT_OEM0) strcat(buf, "OEM0 "); + if (status & BT_SMS_ATN) strcat(buf, "SMS "); + if (status & BT_B2H_ATN) strcat(buf, "B2H "); + if (status & BT_H2B_ATN) strcat(buf, "H2B "); + strcat(buf, "]"); + return buf; +} +#define STATUS2TXT(buf) status2txt(status, buf) + +/* This will be called from within this module on a hosed condition */ +#define FIRST_SEQ 0 +static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io) +{ + bt->state = BT_STATE_IDLE; + bt->last_state = BT_STATE_IDLE; + bt->seq = FIRST_SEQ; + bt->io = io; + bt->write_count = 0; + bt->read_count = 0; + bt->error_retries = 0; + bt->nonzero_status = 0; + bt->truncated = 0; + bt->timeout = BT_NORMAL_TIMEOUT; + return 3; /* We claim 3 bytes of space; ought to check SPMI table */ +} + +static int bt_start_transaction(struct si_sm_data *bt, + unsigned char *data, + unsigned int size) +{ + unsigned int i; + + if ((size < 2) || (size > IPMI_MAX_MSG_LENGTH)) return -1; + + if ((bt->state != BT_STATE_IDLE) && (bt->state != BT_STATE_HOSED)) + return -2; + + if (bt_debug & BT_DEBUG_MSG) { + printk(KERN_WARNING "+++++++++++++++++++++++++++++++++++++\n"); + printk(KERN_WARNING "BT: write seq=0x%02X:", bt->seq); + for (i = 0; i < size; i ++) printk (" %02x", data[i]); + printk("\n"); + } + bt->write_data[0] = size + 1; /* all data plus seq byte */ + bt->write_data[1] = *data; /* NetFn/LUN */ + bt->write_data[2] = bt->seq; + memcpy(bt->write_data + 3, data + 1, size - 1); + bt->write_count = size + 2; + + bt->error_retries = 0; + bt->nonzero_status = 0; + bt->read_count = 0; + bt->truncated = 0; + bt->state = BT_STATE_XACTION_START; + bt->last_state = BT_STATE_IDLE; + bt->timeout = BT_NORMAL_TIMEOUT; + return 0; +} + +/* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE + it calls this. Strip out the length and seq bytes. */ + +static int bt_get_result(struct si_sm_data *bt, + unsigned char *data, + unsigned int length) +{ + int i, msg_len; + + msg_len = bt->read_count - 2; /* account for length & seq */ + /* Always NetFn, Cmd, cCode */ + if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH) { + printk(KERN_WARNING "BT results: bad msg_len = %d\n", msg_len); + data[0] = bt->write_data[1] | 0x4; /* Kludge a response */ + data[1] = bt->write_data[3]; + data[2] = IPMI_ERR_UNSPECIFIED; + msg_len = 3; + } else { + data[0] = bt->read_data[1]; + data[1] = bt->read_data[3]; + if (length < msg_len) bt->truncated = 1; + if (bt->truncated) { /* can be set in read_all_bytes() */ + data[2] = IPMI_ERR_MSG_TRUNCATED; + msg_len = 3; + } else memcpy(data + 2, bt->read_data + 4, msg_len - 2); + + if (bt_debug & BT_DEBUG_MSG) { + printk (KERN_WARNING "BT: res (raw)"); + for (i = 0; i < msg_len; i++) printk(" %02x", data[i]); + printk ("\n"); + } + } + bt->read_count = 0; /* paranoia */ + return msg_len; +} + +/* This bit's functionality is optional */ +#define BT_BMC_HWRST 0x80 + +static void reset_flags(struct si_sm_data *bt) +{ + if (BT_STATUS & BT_H_BUSY) BT_CONTROL(BT_H_BUSY); + if (BT_STATUS & BT_B_BUSY) BT_CONTROL(BT_B_BUSY); + BT_CONTROL(BT_CLR_WR_PTR); + BT_CONTROL(BT_SMS_ATN); + BT_INTMASK_W(BT_BMC_HWRST); +#ifdef DEVELOPMENT_ONLY_NOT_FOR_PRODUCTION + if (BT_STATUS & BT_B2H_ATN) { + int i; + BT_CONTROL(BT_H_BUSY); + BT_CONTROL(BT_B2H_ATN); + BT_CONTROL(BT_CLR_RD_PTR); + for (i = 0; i < IPMI_MAX_MSG_LENGTH + 2; i++) BMC2HOST; + BT_CONTROL(BT_H_BUSY); + } +#endif +} + +static inline void write_all_bytes(struct si_sm_data *bt) +{ + int i; + + if (bt_debug & BT_DEBUG_MSG) { + printk(KERN_WARNING "BT: write %d bytes seq=0x%02X", + bt->write_count, bt->seq); + for (i = 0; i < bt->write_count; i++) + printk (" %02x", bt->write_data[i]); + printk ("\n"); + } + for (i = 0; i < bt->write_count; i++) HOST2BMC(bt->write_data[i]); +} + +static inline int read_all_bytes(struct si_sm_data *bt) +{ + unsigned char i; + + bt->read_data[0] = BMC2HOST; + bt->read_count = bt->read_data[0]; + if (bt_debug & BT_DEBUG_MSG) + printk(KERN_WARNING "BT: read %d bytes:", bt->read_count); + + /* minimum: length, NetFn, Seq, Cmd, cCode == 5 total, or 4 more + following the length byte. */ + if (bt->read_count < 4 || bt->read_count >= IPMI_MAX_MSG_LENGTH) { + if (bt_debug & BT_DEBUG_MSG) + printk("bad length %d\n", bt->read_count); + bt->truncated = 1; + return 1; /* let next XACTION START clean it up */ + } + for (i = 1; i <= bt->read_count; i++) bt->read_data[i] = BMC2HOST; + bt->read_count++; /* account for the length byte */ + + if (bt_debug & BT_DEBUG_MSG) { + for (i = 0; i < bt->read_count; i++) + printk (" %02x", bt->read_data[i]); + printk ("\n"); + } + if (bt->seq != bt->write_data[2]) /* idiot check */ + printk(KERN_WARNING "BT: internal error: sequence mismatch\n"); + + /* per the spec, the (NetFn, Seq, Cmd) tuples should match */ + if ((bt->read_data[3] == bt->write_data[3]) && /* Cmd */ + (bt->read_data[2] == bt->write_data[2]) && /* Sequence */ + ((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8))) + return 1; + + if (bt_debug & BT_DEBUG_MSG) printk(KERN_WARNING "BT: bad packet: " + "want 0x(%02X, %02X, %02X) got (%02X, %02X, %02X)\n", + bt->write_data[1], bt->write_data[2], bt->write_data[3], + bt->read_data[1], bt->read_data[2], bt->read_data[3]); + return 0; +} + +/* Modifies bt->state appropriately, need to get into the bt_event() switch */ + +static void error_recovery(struct si_sm_data *bt, char *reason) +{ + unsigned char status; + char buf[40]; /* For getting status */ + + bt->timeout = BT_NORMAL_TIMEOUT; /* various places want to retry */ + + status = BT_STATUS; + printk(KERN_WARNING "BT: %s in %s %s ", reason, STATE2TXT, + STATUS2TXT(buf)); + + (bt->error_retries)++; + if (bt->error_retries > BT_RETRY_LIMIT) { + printk("retry limit (%d) exceeded\n", BT_RETRY_LIMIT); + bt->state = BT_STATE_HOSED; + if (!bt->nonzero_status) + printk(KERN_ERR "IPMI: BT stuck, try power cycle\n"); + else if (bt->seq == FIRST_SEQ + BT_RETRY_LIMIT) { + /* most likely during insmod */ + printk(KERN_WARNING "IPMI: BT reset (takes 5 secs)\n"); + bt->state = BT_STATE_RESET1; + } + return; + } + + /* Sometimes the BMC queues get in an "off-by-one" state...*/ + if ((bt->state == BT_STATE_B2H_WAIT) && (status & BT_B2H_ATN)) { + printk("retry B2H_WAIT\n"); + return; + } + + printk("restart command\n"); + bt->state = BT_STATE_RESTART; +} + +/* Check the status and (possibly) advance the BT state machine. The + default return is SI_SM_CALL_WITH_DELAY. */ + +static enum si_sm_result bt_event(struct si_sm_data *bt, long time) +{ + unsigned char status; + char buf[40]; /* For getting status */ + int i; + + status = BT_STATUS; + bt->nonzero_status |= status; + + if ((bt_debug & BT_DEBUG_STATES) && (bt->state != bt->last_state)) + printk(KERN_WARNING "BT: %s %s TO=%ld - %ld \n", + STATE2TXT, + STATUS2TXT(buf), + bt->timeout, + time); + bt->last_state = bt->state; + + if (bt->state == BT_STATE_HOSED) return SI_SM_HOSED; + + if (bt->state != BT_STATE_IDLE) { /* do timeout test */ + + /* Certain states, on error conditions, can lock up a CPU + because they are effectively in an infinite loop with + CALL_WITHOUT_DELAY (right back here with time == 0). + Prevent infinite lockup by ALWAYS decrementing timeout. */ + + /* FIXME: bt_event is sometimes called with time > BT_NORMAL_TIMEOUT + (noticed in ipmi_smic_sm.c January 2004) */ + + if ((time <= 0) || (time >= BT_NORMAL_TIMEOUT)) time = 100; + bt->timeout -= time; + if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) { + error_recovery(bt, "timed out"); + return SI_SM_CALL_WITHOUT_DELAY; + } + } + + switch (bt->state) { + + case BT_STATE_IDLE: /* check for asynchronous messages */ + if (status & BT_SMS_ATN) { + BT_CONTROL(BT_SMS_ATN); /* clear it */ + return SI_SM_ATTN; + } + return SI_SM_IDLE; + + case BT_STATE_XACTION_START: + if (status & BT_H_BUSY) { + BT_CONTROL(BT_H_BUSY); + break; + } + if (status & BT_B2H_ATN) break; + bt->state = BT_STATE_WRITE_BYTES; + return SI_SM_CALL_WITHOUT_DELAY; /* for logging */ + + case BT_STATE_WRITE_BYTES: + if (status & (BT_B_BUSY | BT_H2B_ATN)) break; + BT_CONTROL(BT_CLR_WR_PTR); + write_all_bytes(bt); + BT_CONTROL(BT_H2B_ATN); /* clears too fast to catch? */ + bt->state = BT_STATE_WRITE_CONSUME; + return SI_SM_CALL_WITHOUT_DELAY; /* it MIGHT sail through */ + + case BT_STATE_WRITE_CONSUME: /* BMCs usually blow right thru here */ + if (status & (BT_H2B_ATN | BT_B_BUSY)) break; + bt->state = BT_STATE_B2H_WAIT; + /* fall through with status */ + + /* Stay in BT_STATE_B2H_WAIT until a packet matches. However, spinning + hard here, constantly reading status, seems to hold off the + generation of B2H_ATN so ALWAYS return CALL_WITH_DELAY. */ + + case BT_STATE_B2H_WAIT: + if (!(status & BT_B2H_ATN)) break; + + /* Assume ordered, uncached writes: no need to wait */ + if (!(status & BT_H_BUSY)) BT_CONTROL(BT_H_BUSY); /* set */ + BT_CONTROL(BT_B2H_ATN); /* clear it, ACK to the BMC */ + BT_CONTROL(BT_CLR_RD_PTR); /* reset the queue */ + i = read_all_bytes(bt); + BT_CONTROL(BT_H_BUSY); /* clear */ + if (!i) break; /* Try this state again */ + bt->state = BT_STATE_READ_END; + return SI_SM_CALL_WITHOUT_DELAY; /* for logging */ + + case BT_STATE_READ_END: + + /* I could wait on BT_H_BUSY to go clear for a truly clean + exit. However, this is already done in XACTION_START + and the (possible) extra loop/status/possible wait affects + performance. So, as long as it works, just ignore H_BUSY */ + +#ifdef MAKE_THIS_TRUE_IF_NECESSARY + + if (status & BT_H_BUSY) break; +#endif + bt->seq++; + bt->state = BT_STATE_IDLE; + return SI_SM_TRANSACTION_COMPLETE; + + case BT_STATE_RESET1: + reset_flags(bt); + bt->timeout = BT_RESET_DELAY; + bt->state = BT_STATE_RESET2; + break; + + case BT_STATE_RESET2: /* Send a soft reset */ + BT_CONTROL(BT_CLR_WR_PTR); + HOST2BMC(3); /* number of bytes following */ + HOST2BMC(0x18); /* NetFn/LUN == Application, LUN 0 */ + HOST2BMC(42); /* Sequence number */ + HOST2BMC(3); /* Cmd == Soft reset */ + BT_CONTROL(BT_H2B_ATN); + bt->state = BT_STATE_RESET3; + break; + + case BT_STATE_RESET3: + if (bt->timeout > 0) return SI_SM_CALL_WITH_DELAY; + bt->state = BT_STATE_RESTART; /* printk in debug modes */ + break; + + case BT_STATE_RESTART: /* don't reset retries! */ + bt->write_data[2] = ++bt->seq; + bt->read_count = 0; + bt->nonzero_status = 0; + bt->timeout = BT_NORMAL_TIMEOUT; + bt->state = BT_STATE_XACTION_START; + break; + + default: /* HOSED is supposed to be caught much earlier */ + error_recovery(bt, "internal logic error"); + break; + } + return SI_SM_CALL_WITH_DELAY; +} + +static int bt_detect(struct si_sm_data *bt) +{ + /* It's impossible for the BT status and interrupt registers to be + all 1's, (assuming a properly functioning, self-initialized BMC) + but that's what you get from reading a bogus address, so we + test that first. The calling routine uses negative logic. */ + + if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF)) return 1; + reset_flags(bt); + return 0; +} + +static void bt_cleanup(struct si_sm_data *bt) +{ +} + +static int bt_size(void) +{ + return sizeof(struct si_sm_data); +} + +struct si_sm_handlers bt_smi_handlers = +{ + .version = IPMI_BT_VERSION, + .init_data = bt_init_data, + .start_transaction = bt_start_transaction, + .get_result = bt_get_result, + .event = bt_event, + .detect = bt_detect, + .cleanup = bt_cleanup, + .size = bt_size, +}; diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c new file mode 100644 index 000000000000..49d67f5384a2 --- /dev/null +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -0,0 +1,582 @@ +/* + * ipmi_devintf.c + * + * Linux device interface for the IPMI message handler. + * + * Author: MontaVista Software, Inc. + * Corey Minyard + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IPMI_DEVINTF_VERSION "v33" + +struct ipmi_file_private +{ + ipmi_user_t user; + spinlock_t recv_msg_lock; + struct list_head recv_msgs; + struct file *file; + struct fasync_struct *fasync_queue; + wait_queue_head_t wait; + struct semaphore recv_sem; + int default_retries; + unsigned int default_retry_time_ms; +}; + +static void file_receive_handler(struct ipmi_recv_msg *msg, + void *handler_data) +{ + struct ipmi_file_private *priv = handler_data; + int was_empty; + unsigned long flags; + + spin_lock_irqsave(&(priv->recv_msg_lock), flags); + + was_empty = list_empty(&(priv->recv_msgs)); + list_add_tail(&(msg->link), &(priv->recv_msgs)); + + if (was_empty) { + wake_up_interruptible(&priv->wait); + kill_fasync(&priv->fasync_queue, SIGIO, POLL_IN); + } + + spin_unlock_irqrestore(&(priv->recv_msg_lock), flags); +} + +static unsigned int ipmi_poll(struct file *file, poll_table *wait) +{ + struct ipmi_file_private *priv = file->private_data; + unsigned int mask = 0; + unsigned long flags; + + poll_wait(file, &priv->wait, wait); + + spin_lock_irqsave(&priv->recv_msg_lock, flags); + + if (! list_empty(&(priv->recv_msgs))) + mask |= (POLLIN | POLLRDNORM); + + spin_unlock_irqrestore(&priv->recv_msg_lock, flags); + + return mask; +} + +static int ipmi_fasync(int fd, struct file *file, int on) +{ + struct ipmi_file_private *priv = file->private_data; + int result; + + result = fasync_helper(fd, file, on, &priv->fasync_queue); + + return (result); +} + +static struct ipmi_user_hndl ipmi_hndlrs = +{ + .ipmi_recv_hndl = file_receive_handler, +}; + +static int ipmi_open(struct inode *inode, struct file *file) +{ + int if_num = iminor(inode); + int rv; + struct ipmi_file_private *priv; + + + priv = kmalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->file = file; + + rv = ipmi_create_user(if_num, + &ipmi_hndlrs, + priv, + &(priv->user)); + if (rv) { + kfree(priv); + return rv; + } + + file->private_data = priv; + + spin_lock_init(&(priv->recv_msg_lock)); + INIT_LIST_HEAD(&(priv->recv_msgs)); + init_waitqueue_head(&priv->wait); + priv->fasync_queue = NULL; + sema_init(&(priv->recv_sem), 1); + + /* Use the low-level defaults. */ + priv->default_retries = -1; + priv->default_retry_time_ms = 0; + + return 0; +} + +static int ipmi_release(struct inode *inode, struct file *file) +{ + struct ipmi_file_private *priv = file->private_data; + int rv; + + rv = ipmi_destroy_user(priv->user); + if (rv) + return rv; + + ipmi_fasync (-1, file, 0); + + /* FIXME - free the messages in the list. */ + kfree(priv); + + return 0; +} + +static int handle_send_req(ipmi_user_t user, + struct ipmi_req *req, + int retries, + unsigned int retry_time_ms) +{ + int rv; + struct ipmi_addr addr; + struct kernel_ipmi_msg msg; + + if (req->addr_len > sizeof(struct ipmi_addr)) + return -EINVAL; + + if (copy_from_user(&addr, req->addr, req->addr_len)) + return -EFAULT; + + msg.netfn = req->msg.netfn; + msg.cmd = req->msg.cmd; + msg.data_len = req->msg.data_len; + msg.data = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!msg.data) + return -ENOMEM; + + /* From here out we cannot return, we must jump to "out" for + error exits to free msgdata. */ + + rv = ipmi_validate_addr(&addr, req->addr_len); + if (rv) + goto out; + + if (req->msg.data != NULL) { + if (req->msg.data_len > IPMI_MAX_MSG_LENGTH) { + rv = -EMSGSIZE; + goto out; + } + + if (copy_from_user(msg.data, + req->msg.data, + req->msg.data_len)) + { + rv = -EFAULT; + goto out; + } + } else { + msg.data_len = 0; + } + + rv = ipmi_request_settime(user, + &addr, + req->msgid, + &msg, + NULL, + 0, + retries, + retry_time_ms); + out: + kfree(msg.data); + return rv; +} + +static int ipmi_ioctl(struct inode *inode, + struct file *file, + unsigned int cmd, + unsigned long data) +{ + int rv = -EINVAL; + struct ipmi_file_private *priv = file->private_data; + void __user *arg = (void __user *)data; + + switch (cmd) + { + case IPMICTL_SEND_COMMAND: + { + struct ipmi_req req; + + if (copy_from_user(&req, arg, sizeof(req))) { + rv = -EFAULT; + break; + } + + rv = handle_send_req(priv->user, + &req, + priv->default_retries, + priv->default_retry_time_ms); + break; + } + + case IPMICTL_SEND_COMMAND_SETTIME: + { + struct ipmi_req_settime req; + + if (copy_from_user(&req, arg, sizeof(req))) { + rv = -EFAULT; + break; + } + + rv = handle_send_req(priv->user, + &req.req, + req.retries, + req.retry_time_ms); + break; + } + + case IPMICTL_RECEIVE_MSG: + case IPMICTL_RECEIVE_MSG_TRUNC: + { + struct ipmi_recv rsp; + int addr_len; + struct list_head *entry; + struct ipmi_recv_msg *msg; + unsigned long flags; + + + rv = 0; + if (copy_from_user(&rsp, arg, sizeof(rsp))) { + rv = -EFAULT; + break; + } + + /* We claim a semaphore because we don't want two + users getting something from the queue at a time. + Since we have to release the spinlock before we can + copy the data to the user, it's possible another + user will grab something from the queue, too. Then + the messages might get out of order if something + fails and the message gets put back onto the + queue. This semaphore prevents that problem. */ + down(&(priv->recv_sem)); + + /* Grab the message off the list. */ + spin_lock_irqsave(&(priv->recv_msg_lock), flags); + if (list_empty(&(priv->recv_msgs))) { + spin_unlock_irqrestore(&(priv->recv_msg_lock), flags); + rv = -EAGAIN; + goto recv_err; + } + entry = priv->recv_msgs.next; + msg = list_entry(entry, struct ipmi_recv_msg, link); + list_del(entry); + spin_unlock_irqrestore(&(priv->recv_msg_lock), flags); + + addr_len = ipmi_addr_length(msg->addr.addr_type); + if (rsp.addr_len < addr_len) + { + rv = -EINVAL; + goto recv_putback_on_err; + } + + if (copy_to_user(rsp.addr, &(msg->addr), addr_len)) { + rv = -EFAULT; + goto recv_putback_on_err; + } + rsp.addr_len = addr_len; + + rsp.recv_type = msg->recv_type; + rsp.msgid = msg->msgid; + rsp.msg.netfn = msg->msg.netfn; + rsp.msg.cmd = msg->msg.cmd; + + if (msg->msg.data_len > 0) { + if (rsp.msg.data_len < msg->msg.data_len) { + rv = -EMSGSIZE; + if (cmd == IPMICTL_RECEIVE_MSG_TRUNC) { + msg->msg.data_len = rsp.msg.data_len; + } else { + goto recv_putback_on_err; + } + } + + if (copy_to_user(rsp.msg.data, + msg->msg.data, + msg->msg.data_len)) + { + rv = -EFAULT; + goto recv_putback_on_err; + } + rsp.msg.data_len = msg->msg.data_len; + } else { + rsp.msg.data_len = 0; + } + + if (copy_to_user(arg, &rsp, sizeof(rsp))) { + rv = -EFAULT; + goto recv_putback_on_err; + } + + up(&(priv->recv_sem)); + ipmi_free_recv_msg(msg); + break; + + recv_putback_on_err: + /* If we got an error, put the message back onto + the head of the queue. */ + spin_lock_irqsave(&(priv->recv_msg_lock), flags); + list_add(entry, &(priv->recv_msgs)); + spin_unlock_irqrestore(&(priv->recv_msg_lock), flags); + up(&(priv->recv_sem)); + break; + + recv_err: + up(&(priv->recv_sem)); + break; + } + + case IPMICTL_REGISTER_FOR_CMD: + { + struct ipmi_cmdspec val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_register_for_cmd(priv->user, val.netfn, val.cmd); + break; + } + + case IPMICTL_UNREGISTER_FOR_CMD: + { + struct ipmi_cmdspec val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_unregister_for_cmd(priv->user, val.netfn, val.cmd); + break; + } + + case IPMICTL_SET_GETS_EVENTS_CMD: + { + int val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + rv = ipmi_set_gets_events(priv->user, val); + break; + } + + case IPMICTL_SET_MY_ADDRESS_CMD: + { + unsigned int val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + ipmi_set_my_address(priv->user, val); + rv = 0; + break; + } + + case IPMICTL_GET_MY_ADDRESS_CMD: + { + unsigned int val; + + val = ipmi_get_my_address(priv->user); + + if (copy_to_user(arg, &val, sizeof(val))) { + rv = -EFAULT; + break; + } + rv = 0; + break; + } + + case IPMICTL_SET_MY_LUN_CMD: + { + unsigned int val; + + if (copy_from_user(&val, arg, sizeof(val))) { + rv = -EFAULT; + break; + } + + ipmi_set_my_LUN(priv->user, val); + rv = 0; + break; + } + + case IPMICTL_GET_MY_LUN_CMD: + { + unsigned int val; + + val = ipmi_get_my_LUN(priv->user); + + if (copy_to_user(arg, &val, sizeof(val))) { + rv = -EFAULT; + break; + } + rv = 0; + break; + } + case IPMICTL_SET_TIMING_PARMS_CMD: + { + struct ipmi_timing_parms parms; + + if (copy_from_user(&parms, arg, sizeof(parms))) { + rv = -EFAULT; + break; + } + + priv->default_retries = parms.retries; + priv->default_retry_time_ms = parms.retry_time_ms; + rv = 0; + break; + } + + case IPMICTL_GET_TIMING_PARMS_CMD: + { + struct ipmi_timing_parms parms; + + parms.retries = priv->default_retries; + parms.retry_time_ms = priv->default_retry_time_ms; + + if (copy_to_user(arg, &parms, sizeof(parms))) { + rv = -EFAULT; + break; + } + + rv = 0; + break; + } + } + + return rv; +} + + +static struct file_operations ipmi_fops = { + .owner = THIS_MODULE, + .ioctl = ipmi_ioctl, + .open = ipmi_open, + .release = ipmi_release, + .fasync = ipmi_fasync, + .poll = ipmi_poll, +}; + +#define DEVICE_NAME "ipmidev" + +static int ipmi_major = 0; +module_param(ipmi_major, int, 0); +MODULE_PARM_DESC(ipmi_major, "Sets the major number of the IPMI device. By" + " default, or if you set it to zero, it will choose the next" + " available device. Setting it to -1 will disable the" + " interface. Other values will set the major device number" + " to that value."); + +static void ipmi_new_smi(int if_num) +{ + devfs_mk_cdev(MKDEV(ipmi_major, if_num), + S_IFCHR | S_IRUSR | S_IWUSR, + "ipmidev/%d", if_num); +} + +static void ipmi_smi_gone(int if_num) +{ + devfs_remove("ipmidev/%d", if_num); +} + +static struct ipmi_smi_watcher smi_watcher = +{ + .owner = THIS_MODULE, + .new_smi = ipmi_new_smi, + .smi_gone = ipmi_smi_gone, +}; + +static __init int init_ipmi_devintf(void) +{ + int rv; + + if (ipmi_major < 0) + return -EINVAL; + + printk(KERN_INFO "ipmi device interface version " + IPMI_DEVINTF_VERSION "\n"); + + rv = register_chrdev(ipmi_major, DEVICE_NAME, &ipmi_fops); + if (rv < 0) { + printk(KERN_ERR "ipmi: can't get major %d\n", ipmi_major); + return rv; + } + + if (ipmi_major == 0) { + ipmi_major = rv; + } + + devfs_mk_dir(DEVICE_NAME); + + rv = ipmi_smi_watcher_register(&smi_watcher); + if (rv) { + unregister_chrdev(ipmi_major, DEVICE_NAME); + printk(KERN_WARNING "ipmi: can't register smi watcher\n"); + return rv; + } + + return 0; +} +module_init(init_ipmi_devintf); + +static __exit void cleanup_ipmi(void) +{ + ipmi_smi_watcher_unregister(&smi_watcher); + devfs_remove(DEVICE_NAME); + unregister_chrdev(ipmi_major, DEVICE_NAME); +} +module_exit(cleanup_ipmi); + +MODULE_LICENSE("GPL"); diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c new file mode 100644 index 000000000000..48cce24329be --- /dev/null +++ b/drivers/char/ipmi/ipmi_kcs_sm.c @@ -0,0 +1,500 @@ +/* + * ipmi_kcs_sm.c + * + * State machine for handling IPMI KCS interfaces. + * + * Author: MontaVista Software, Inc. + * Corey Minyard + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This state machine is taken from the state machine in the IPMI spec, + * pretty much verbatim. If you have questions about the states, see + * that document. + */ + +#include /* For printk. */ +#include +#include /* for completion codes */ +#include "ipmi_si_sm.h" + +#define IPMI_KCS_VERSION "v33" + +/* Set this if you want a printout of why the state machine was hosed + when it gets hosed. */ +#define DEBUG_HOSED_REASON + +/* Print the state machine state on entry every time. */ +#undef DEBUG_STATE + +/* The states the KCS driver may be in. */ +enum kcs_states { + KCS_IDLE, /* The KCS interface is currently + doing nothing. */ + KCS_START_OP, /* We are starting an operation. The + data is in the output buffer, but + nothing has been done to the + interface yet. This was added to + the state machine in the spec to + wait for the initial IBF. */ + KCS_WAIT_WRITE_START, /* We have written a write cmd to the + interface. */ + KCS_WAIT_WRITE, /* We are writing bytes to the + interface. */ + KCS_WAIT_WRITE_END, /* We have written the write end cmd + to the interface, and still need to + write the last byte. */ + KCS_WAIT_READ, /* We are waiting to read data from + the interface. */ + KCS_ERROR0, /* State to transition to the error + handler, this was added to the + state machine in the spec to be + sure IBF was there. */ + KCS_ERROR1, /* First stage error handler, wait for + the interface to respond. */ + KCS_ERROR2, /* The abort cmd has been written, + wait for the interface to + respond. */ + KCS_ERROR3, /* We wrote some data to the + interface, wait for it to switch to + read mode. */ + KCS_HOSED /* The hardware failed to follow the + state machine. */ +}; + +#define MAX_KCS_READ_SIZE 80 +#define MAX_KCS_WRITE_SIZE 80 + +/* Timeouts in microseconds. */ +#define IBF_RETRY_TIMEOUT 1000000 +#define OBF_RETRY_TIMEOUT 1000000 +#define MAX_ERROR_RETRIES 10 + +struct si_sm_data +{ + enum kcs_states state; + struct si_sm_io *io; + unsigned char write_data[MAX_KCS_WRITE_SIZE]; + int write_pos; + int write_count; + int orig_write_count; + unsigned char read_data[MAX_KCS_READ_SIZE]; + int read_pos; + int truncated; + + unsigned int error_retries; + long ibf_timeout; + long obf_timeout; +}; + +static unsigned int init_kcs_data(struct si_sm_data *kcs, + struct si_sm_io *io) +{ + kcs->state = KCS_IDLE; + kcs->io = io; + kcs->write_pos = 0; + kcs->write_count = 0; + kcs->orig_write_count = 0; + kcs->read_pos = 0; + kcs->error_retries = 0; + kcs->truncated = 0; + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + + /* Reserve 2 I/O bytes. */ + return 2; +} + +static inline unsigned char read_status(struct si_sm_data *kcs) +{ + return kcs->io->inputb(kcs->io, 1); +} + +static inline unsigned char read_data(struct si_sm_data *kcs) +{ + return kcs->io->inputb(kcs->io, 0); +} + +static inline void write_cmd(struct si_sm_data *kcs, unsigned char data) +{ + kcs->io->outputb(kcs->io, 1, data); +} + +static inline void write_data(struct si_sm_data *kcs, unsigned char data) +{ + kcs->io->outputb(kcs->io, 0, data); +} + +/* Control codes. */ +#define KCS_GET_STATUS_ABORT 0x60 +#define KCS_WRITE_START 0x61 +#define KCS_WRITE_END 0x62 +#define KCS_READ_BYTE 0x68 + +/* Status bits. */ +#define GET_STATUS_STATE(status) (((status) >> 6) & 0x03) +#define KCS_IDLE_STATE 0 +#define KCS_READ_STATE 1 +#define KCS_WRITE_STATE 2 +#define KCS_ERROR_STATE 3 +#define GET_STATUS_ATN(status) ((status) & 0x04) +#define GET_STATUS_IBF(status) ((status) & 0x02) +#define GET_STATUS_OBF(status) ((status) & 0x01) + + +static inline void write_next_byte(struct si_sm_data *kcs) +{ + write_data(kcs, kcs->write_data[kcs->write_pos]); + (kcs->write_pos)++; + (kcs->write_count)--; +} + +static inline void start_error_recovery(struct si_sm_data *kcs, char *reason) +{ + (kcs->error_retries)++; + if (kcs->error_retries > MAX_ERROR_RETRIES) { +#ifdef DEBUG_HOSED_REASON + printk("ipmi_kcs_sm: kcs hosed: %s\n", reason); +#endif + kcs->state = KCS_HOSED; + } else { + kcs->state = KCS_ERROR0; + } +} + +static inline void read_next_byte(struct si_sm_data *kcs) +{ + if (kcs->read_pos >= MAX_KCS_READ_SIZE) { + /* Throw the data away and mark it truncated. */ + read_data(kcs); + kcs->truncated = 1; + } else { + kcs->read_data[kcs->read_pos] = read_data(kcs); + (kcs->read_pos)++; + } + write_data(kcs, KCS_READ_BYTE); +} + +static inline int check_ibf(struct si_sm_data *kcs, unsigned char status, + long time) +{ + if (GET_STATUS_IBF(status)) { + kcs->ibf_timeout -= time; + if (kcs->ibf_timeout < 0) { + start_error_recovery(kcs, "IBF not ready in time"); + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + return 1; + } + return 0; + } + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + return 1; +} + +static inline int check_obf(struct si_sm_data *kcs, unsigned char status, + long time) +{ + if (! GET_STATUS_OBF(status)) { + kcs->obf_timeout -= time; + if (kcs->obf_timeout < 0) { + start_error_recovery(kcs, "OBF not ready in time"); + return 1; + } + return 0; + } + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + return 1; +} + +static void clear_obf(struct si_sm_data *kcs, unsigned char status) +{ + if (GET_STATUS_OBF(status)) + read_data(kcs); +} + +static void restart_kcs_transaction(struct si_sm_data *kcs) +{ + kcs->write_count = kcs->orig_write_count; + kcs->write_pos = 0; + kcs->read_pos = 0; + kcs->state = KCS_WAIT_WRITE_START; + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + write_cmd(kcs, KCS_WRITE_START); +} + +static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data, + unsigned int size) +{ + if ((size < 2) || (size > MAX_KCS_WRITE_SIZE)) { + return -1; + } + + if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED)) { + return -2; + } + + kcs->error_retries = 0; + memcpy(kcs->write_data, data, size); + kcs->write_count = size; + kcs->orig_write_count = size; + kcs->write_pos = 0; + kcs->read_pos = 0; + kcs->state = KCS_START_OP; + kcs->ibf_timeout = IBF_RETRY_TIMEOUT; + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + return 0; +} + +static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data, + unsigned int length) +{ + if (length < kcs->read_pos) { + kcs->read_pos = length; + kcs->truncated = 1; + } + + memcpy(data, kcs->read_data, kcs->read_pos); + + if ((length >= 3) && (kcs->read_pos < 3)) { + /* Guarantee that we return at least 3 bytes, with an + error in the third byte if it is too short. */ + data[2] = IPMI_ERR_UNSPECIFIED; + kcs->read_pos = 3; + } + if (kcs->truncated) { + /* Report a truncated error. We might overwrite + another error, but that's too bad, the user needs + to know it was truncated. */ + data[2] = IPMI_ERR_MSG_TRUNCATED; + kcs->truncated = 0; + } + + return kcs->read_pos; +} + +/* This implements the state machine defined in the IPMI manual, see + that for details on how this works. Divide that flowchart into + sections delimited by "Wait for IBF" and this will become clear. */ +static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) +{ + unsigned char status; + unsigned char state; + + status = read_status(kcs); + +#ifdef DEBUG_STATE + printk(" State = %d, %x\n", kcs->state, status); +#endif + /* All states wait for ibf, so just do it here. */ + if (!check_ibf(kcs, status, time)) + return SI_SM_CALL_WITH_DELAY; + + /* Just about everything looks at the KCS state, so grab that, too. */ + state = GET_STATUS_STATE(status); + + switch (kcs->state) { + case KCS_IDLE: + /* If there's and interrupt source, turn it off. */ + clear_obf(kcs, status); + + if (GET_STATUS_ATN(status)) + return SI_SM_ATTN; + else + return SI_SM_IDLE; + + case KCS_START_OP: + if (state != KCS_IDLE) { + start_error_recovery(kcs, + "State machine not idle at start"); + break; + } + + clear_obf(kcs, status); + write_cmd(kcs, KCS_WRITE_START); + kcs->state = KCS_WAIT_WRITE_START; + break; + + case KCS_WAIT_WRITE_START: + if (state != KCS_WRITE_STATE) { + start_error_recovery( + kcs, + "Not in write state at write start"); + break; + } + read_data(kcs); + if (kcs->write_count == 1) { + write_cmd(kcs, KCS_WRITE_END); + kcs->state = KCS_WAIT_WRITE_END; + } else { + write_next_byte(kcs); + kcs->state = KCS_WAIT_WRITE; + } + break; + + case KCS_WAIT_WRITE: + if (state != KCS_WRITE_STATE) { + start_error_recovery(kcs, + "Not in write state for write"); + break; + } + clear_obf(kcs, status); + if (kcs->write_count == 1) { + write_cmd(kcs, KCS_WRITE_END); + kcs->state = KCS_WAIT_WRITE_END; + } else { + write_next_byte(kcs); + } + break; + + case KCS_WAIT_WRITE_END: + if (state != KCS_WRITE_STATE) { + start_error_recovery(kcs, + "Not in write state for write end"); + break; + } + clear_obf(kcs, status); + write_next_byte(kcs); + kcs->state = KCS_WAIT_READ; + break; + + case KCS_WAIT_READ: + if ((state != KCS_READ_STATE) && (state != KCS_IDLE_STATE)) { + start_error_recovery( + kcs, + "Not in read or idle in read state"); + break; + } + + if (state == KCS_READ_STATE) { + if (! check_obf(kcs, status, time)) + return SI_SM_CALL_WITH_DELAY; + read_next_byte(kcs); + } else { + /* We don't implement this exactly like the state + machine in the spec. Some broken hardware + does not write the final dummy byte to the + read register. Thus obf will never go high + here. We just go straight to idle, and we + handle clearing out obf in idle state if it + happens to come in. */ + clear_obf(kcs, status); + kcs->orig_write_count = 0; + kcs->state = KCS_IDLE; + return SI_SM_TRANSACTION_COMPLETE; + } + break; + + case KCS_ERROR0: + clear_obf(kcs, status); + write_cmd(kcs, KCS_GET_STATUS_ABORT); + kcs->state = KCS_ERROR1; + break; + + case KCS_ERROR1: + clear_obf(kcs, status); + write_data(kcs, 0); + kcs->state = KCS_ERROR2; + break; + + case KCS_ERROR2: + if (state != KCS_READ_STATE) { + start_error_recovery(kcs, + "Not in read state for error2"); + break; + } + if (! check_obf(kcs, status, time)) + return SI_SM_CALL_WITH_DELAY; + + clear_obf(kcs, status); + write_data(kcs, KCS_READ_BYTE); + kcs->state = KCS_ERROR3; + break; + + case KCS_ERROR3: + if (state != KCS_IDLE_STATE) { + start_error_recovery(kcs, + "Not in idle state for error3"); + break; + } + + if (! check_obf(kcs, status, time)) + return SI_SM_CALL_WITH_DELAY; + + clear_obf(kcs, status); + if (kcs->orig_write_count) { + restart_kcs_transaction(kcs); + } else { + kcs->state = KCS_IDLE; + return SI_SM_TRANSACTION_COMPLETE; + } + break; + + case KCS_HOSED: + break; + } + + if (kcs->state == KCS_HOSED) { + init_kcs_data(kcs, kcs->io); + return SI_SM_HOSED; + } + + return SI_SM_CALL_WITHOUT_DELAY; +} + +static int kcs_size(void) +{ + return sizeof(struct si_sm_data); +} + +static int kcs_detect(struct si_sm_data *kcs) +{ + /* It's impossible for the KCS status register to be all 1's, + (assuming a properly functioning, self-initialized BMC) + but that's what you get from reading a bogus address, so we + test that first. */ + if (read_status(kcs) == 0xff) + return 1; + + return 0; +} + +static void kcs_cleanup(struct si_sm_data *kcs) +{ +} + +struct si_sm_handlers kcs_smi_handlers = +{ + .version = IPMI_KCS_VERSION, + .init_data = init_kcs_data, + .start_transaction = start_kcs_transaction, + .get_result = get_kcs_result, + .event = kcs_event, + .detect = kcs_detect, + .cleanup = kcs_cleanup, + .size = kcs_size, +}; diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c new file mode 100644 index 000000000000..a6606a1aced7 --- /dev/null +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -0,0 +1,3174 @@ +/* + * ipmi_msghandler.c + * + * Incoming and outgoing message routing for an IPMI interface. + * + * Author: MontaVista Software, Inc. + * Corey Minyard + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PFX "IPMI message handler: " +#define IPMI_MSGHANDLER_VERSION "v33" + +static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); +static int ipmi_init_msghandler(void); + +static int initialized = 0; + +static struct proc_dir_entry *proc_ipmi_root = NULL; + +#define MAX_EVENTS_IN_QUEUE 25 + +/* Don't let a message sit in a queue forever, always time it with at lest + the max message timer. This is in milliseconds. */ +#define MAX_MSG_TIMEOUT 60000 + +struct ipmi_user +{ + struct list_head link; + + /* The upper layer that handles receive messages. */ + struct ipmi_user_hndl *handler; + void *handler_data; + + /* The interface this user is bound to. */ + ipmi_smi_t intf; + + /* Does this interface receive IPMI events? */ + int gets_events; +}; + +struct cmd_rcvr +{ + struct list_head link; + + ipmi_user_t user; + unsigned char netfn; + unsigned char cmd; +}; + +struct seq_table +{ + unsigned int inuse : 1; + unsigned int broadcast : 1; + + unsigned long timeout; + unsigned long orig_timeout; + unsigned int retries_left; + + /* To verify on an incoming send message response that this is + the message that the response is for, we keep a sequence id + and increment it every time we send a message. */ + long seqid; + + /* This is held so we can properly respond to the message on a + timeout, and it is used to hold the temporary data for + retransmission, too. */ + struct ipmi_recv_msg *recv_msg; +}; + +/* Store the information in a msgid (long) to allow us to find a + sequence table entry from the msgid. */ +#define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff)) + +#define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \ + do { \ + seq = ((msgid >> 26) & 0x3f); \ + seqid = (msgid & 0x3fffff); \ + } while(0) + +#define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff) + +struct ipmi_channel +{ + unsigned char medium; + unsigned char protocol; +}; + +struct ipmi_proc_entry +{ + char *name; + struct ipmi_proc_entry *next; +}; + +#define IPMI_IPMB_NUM_SEQ 64 +#define IPMI_MAX_CHANNELS 8 +struct ipmi_smi +{ + /* What interface number are we? */ + int intf_num; + + /* The list of upper layers that are using me. We read-lock + this when delivering messages to the upper layer to keep + the user from going away while we are processing the + message. This means that you cannot add or delete a user + from the receive callback. */ + rwlock_t users_lock; + struct list_head users; + + /* Used for wake ups at startup. */ + wait_queue_head_t waitq; + + /* The IPMI version of the BMC on the other end. */ + unsigned char version_major; + unsigned char version_minor; + + /* This is the lower-layer's sender routine. */ + struct ipmi_smi_handlers *handlers; + void *send_info; + + /* A list of proc entries for this interface. This does not + need a lock, only one thread creates it and only one thread + destroys it. */ + struct ipmi_proc_entry *proc_entries; + + /* A table of sequence numbers for this interface. We use the + sequence numbers for IPMB messages that go out of the + interface to match them up with their responses. A routine + is called periodically to time the items in this list. */ + spinlock_t seq_lock; + struct seq_table seq_table[IPMI_IPMB_NUM_SEQ]; + int curr_seq; + + /* Messages that were delayed for some reason (out of memory, + for instance), will go in here to be processed later in a + periodic timer interrupt. */ + spinlock_t waiting_msgs_lock; + struct list_head waiting_msgs; + + /* The list of command receivers that are registered for commands + on this interface. */ + rwlock_t cmd_rcvr_lock; + struct list_head cmd_rcvrs; + + /* Events that were queues because no one was there to receive + them. */ + spinlock_t events_lock; /* For dealing with event stuff. */ + struct list_head waiting_events; + unsigned int waiting_events_count; /* How many events in queue? */ + + /* This will be non-null if someone registers to receive all + IPMI commands (this is for interface emulation). There + may not be any things in the cmd_rcvrs list above when + this is registered. */ + ipmi_user_t all_cmd_rcvr; + + /* My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR, + but may be changed by the user. */ + unsigned char my_address; + + /* My LUN. This should generally stay the SMS LUN, but just in + case... */ + unsigned char my_lun; + + /* The event receiver for my BMC, only really used at panic + shutdown as a place to store this. */ + unsigned char event_receiver; + unsigned char event_receiver_lun; + unsigned char local_sel_device; + unsigned char local_event_generator; + + /* A cheap hack, if this is non-null and a message to an + interface comes in with a NULL user, call this routine with + it. Note that the message will still be freed by the + caller. This only works on the system interface. */ + void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_smi_msg *msg); + + /* When we are scanning the channels for an SMI, this will + tell which channel we are scanning. */ + int curr_channel; + + /* Channel information */ + struct ipmi_channel channels[IPMI_MAX_CHANNELS]; + + /* Proc FS stuff. */ + struct proc_dir_entry *proc_dir; + char proc_dir_name[10]; + + spinlock_t counter_lock; /* For making counters atomic. */ + + /* Commands we got that were invalid. */ + unsigned int sent_invalid_commands; + + /* Commands we sent to the MC. */ + unsigned int sent_local_commands; + /* Responses from the MC that were delivered to a user. */ + unsigned int handled_local_responses; + /* Responses from the MC that were not delivered to a user. */ + unsigned int unhandled_local_responses; + + /* Commands we sent out to the IPMB bus. */ + unsigned int sent_ipmb_commands; + /* Commands sent on the IPMB that had errors on the SEND CMD */ + unsigned int sent_ipmb_command_errs; + /* Each retransmit increments this count. */ + unsigned int retransmitted_ipmb_commands; + /* When a message times out (runs out of retransmits) this is + incremented. */ + unsigned int timed_out_ipmb_commands; + + /* This is like above, but for broadcasts. Broadcasts are + *not* included in the above count (they are expected to + time out). */ + unsigned int timed_out_ipmb_broadcasts; + + /* Responses I have sent to the IPMB bus. */ + unsigned int sent_ipmb_responses; + + /* The response was delivered to the user. */ + unsigned int handled_ipmb_responses; + /* The response had invalid data in it. */ + unsigned int invalid_ipmb_responses; + /* The response didn't have anyone waiting for it. */ + unsigned int unhandled_ipmb_responses; + + /* Commands we sent out to the IPMB bus. */ + unsigned int sent_lan_commands; + /* Commands sent on the IPMB that had errors on the SEND CMD */ + unsigned int sent_lan_command_errs; + /* Each retransmit increments this count. */ + unsigned int retransmitted_lan_commands; + /* When a message times out (runs out of retransmits) this is + incremented. */ + unsigned int timed_out_lan_commands; + + /* Responses I have sent to the IPMB bus. */ + unsigned int sent_lan_responses; + + /* The response was delivered to the user. */ + unsigned int handled_lan_responses; + /* The response had invalid data in it. */ + unsigned int invalid_lan_responses; + /* The response didn't have anyone waiting for it. */ + unsigned int unhandled_lan_responses; + + /* The command was delivered to the user. */ + unsigned int handled_commands; + /* The command had invalid data in it. */ + unsigned int invalid_commands; + /* The command didn't have anyone waiting for it. */ + unsigned int unhandled_commands; + + /* Invalid data in an event. */ + unsigned int invalid_events; + /* Events that were received with the proper format. */ + unsigned int events; +}; + +#define MAX_IPMI_INTERFACES 4 +static ipmi_smi_t ipmi_interfaces[MAX_IPMI_INTERFACES]; + +/* Used to keep interfaces from going away while operations are + operating on interfaces. Grab read if you are not modifying the + interfaces, write if you are. */ +static DECLARE_RWSEM(interfaces_sem); + +/* Directly protects the ipmi_interfaces data structure. This is + claimed in the timer interrupt. */ +static DEFINE_SPINLOCK(interfaces_lock); + +/* List of watchers that want to know when smi's are added and + deleted. */ +static struct list_head smi_watchers = LIST_HEAD_INIT(smi_watchers); +static DECLARE_RWSEM(smi_watchers_sem); + +int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher) +{ + int i; + + down_read(&interfaces_sem); + down_write(&smi_watchers_sem); + list_add(&(watcher->link), &smi_watchers); + for (i=0; inew_smi(i); + } + } + up_write(&smi_watchers_sem); + up_read(&interfaces_sem); + return 0; +} + +int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher) +{ + down_write(&smi_watchers_sem); + list_del(&(watcher->link)); + up_write(&smi_watchers_sem); + return 0; +} + +static void +call_smi_watchers(int i) +{ + struct ipmi_smi_watcher *w; + + down_read(&smi_watchers_sem); + list_for_each_entry(w, &smi_watchers, link) { + if (try_module_get(w->owner)) { + w->new_smi(i); + module_put(w->owner); + } + } + up_read(&smi_watchers_sem); +} + +static int +ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) +{ + if (addr1->addr_type != addr2->addr_type) + return 0; + + if (addr1->channel != addr2->channel) + return 0; + + if (addr1->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { + struct ipmi_system_interface_addr *smi_addr1 + = (struct ipmi_system_interface_addr *) addr1; + struct ipmi_system_interface_addr *smi_addr2 + = (struct ipmi_system_interface_addr *) addr2; + return (smi_addr1->lun == smi_addr2->lun); + } + + if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE) + || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) + { + struct ipmi_ipmb_addr *ipmb_addr1 + = (struct ipmi_ipmb_addr *) addr1; + struct ipmi_ipmb_addr *ipmb_addr2 + = (struct ipmi_ipmb_addr *) addr2; + + return ((ipmb_addr1->slave_addr == ipmb_addr2->slave_addr) + && (ipmb_addr1->lun == ipmb_addr2->lun)); + } + + if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) { + struct ipmi_lan_addr *lan_addr1 + = (struct ipmi_lan_addr *) addr1; + struct ipmi_lan_addr *lan_addr2 + = (struct ipmi_lan_addr *) addr2; + + return ((lan_addr1->remote_SWID == lan_addr2->remote_SWID) + && (lan_addr1->local_SWID == lan_addr2->local_SWID) + && (lan_addr1->session_handle + == lan_addr2->session_handle) + && (lan_addr1->lun == lan_addr2->lun)); + } + + return 1; +} + +int ipmi_validate_addr(struct ipmi_addr *addr, int len) +{ + if (len < sizeof(struct ipmi_system_interface_addr)) { + return -EINVAL; + } + + if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { + if (addr->channel != IPMI_BMC_CHANNEL) + return -EINVAL; + return 0; + } + + if ((addr->channel == IPMI_BMC_CHANNEL) + || (addr->channel >= IPMI_NUM_CHANNELS) + || (addr->channel < 0)) + return -EINVAL; + + if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) + || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) + { + if (len < sizeof(struct ipmi_ipmb_addr)) { + return -EINVAL; + } + return 0; + } + + if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { + if (len < sizeof(struct ipmi_lan_addr)) { + return -EINVAL; + } + return 0; + } + + return -EINVAL; +} + +unsigned int ipmi_addr_length(int addr_type) +{ + if (addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) + return sizeof(struct ipmi_system_interface_addr); + + if ((addr_type == IPMI_IPMB_ADDR_TYPE) + || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) + { + return sizeof(struct ipmi_ipmb_addr); + } + + if (addr_type == IPMI_LAN_ADDR_TYPE) + return sizeof(struct ipmi_lan_addr); + + return 0; +} + +static void deliver_response(struct ipmi_recv_msg *msg) +{ + msg->user->handler->ipmi_recv_hndl(msg, msg->user->handler_data); +} + +/* Find the next sequence number not being used and add the given + message with the given timeout to the sequence table. This must be + called with the interface's seq_lock held. */ +static int intf_next_seq(ipmi_smi_t intf, + struct ipmi_recv_msg *recv_msg, + unsigned long timeout, + int retries, + int broadcast, + unsigned char *seq, + long *seqid) +{ + int rv = 0; + unsigned int i; + + for (i=intf->curr_seq; + (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq; + i=(i+1)%IPMI_IPMB_NUM_SEQ) + { + if (! intf->seq_table[i].inuse) + break; + } + + if (! intf->seq_table[i].inuse) { + intf->seq_table[i].recv_msg = recv_msg; + + /* Start with the maximum timeout, when the send response + comes in we will start the real timer. */ + intf->seq_table[i].timeout = MAX_MSG_TIMEOUT; + intf->seq_table[i].orig_timeout = timeout; + intf->seq_table[i].retries_left = retries; + intf->seq_table[i].broadcast = broadcast; + intf->seq_table[i].inuse = 1; + intf->seq_table[i].seqid = NEXT_SEQID(intf->seq_table[i].seqid); + *seq = i; + *seqid = intf->seq_table[i].seqid; + intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ; + } else { + rv = -EAGAIN; + } + + return rv; +} + +/* Return the receive message for the given sequence number and + release the sequence number so it can be reused. Some other data + is passed in to be sure the message matches up correctly (to help + guard against message coming in after their timeout and the + sequence number being reused). */ +static int intf_find_seq(ipmi_smi_t intf, + unsigned char seq, + short channel, + unsigned char cmd, + unsigned char netfn, + struct ipmi_addr *addr, + struct ipmi_recv_msg **recv_msg) +{ + int rv = -ENODEV; + unsigned long flags; + + if (seq >= IPMI_IPMB_NUM_SEQ) + return -EINVAL; + + spin_lock_irqsave(&(intf->seq_lock), flags); + if (intf->seq_table[seq].inuse) { + struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg; + + if ((msg->addr.channel == channel) + && (msg->msg.cmd == cmd) + && (msg->msg.netfn == netfn) + && (ipmi_addr_equal(addr, &(msg->addr)))) + { + *recv_msg = msg; + intf->seq_table[seq].inuse = 0; + rv = 0; + } + } + spin_unlock_irqrestore(&(intf->seq_lock), flags); + + return rv; +} + + +/* Start the timer for a specific sequence table entry. */ +static int intf_start_seq_timer(ipmi_smi_t intf, + long msgid) +{ + int rv = -ENODEV; + unsigned long flags; + unsigned char seq; + unsigned long seqid; + + + GET_SEQ_FROM_MSGID(msgid, seq, seqid); + + spin_lock_irqsave(&(intf->seq_lock), flags); + /* We do this verification because the user can be deleted + while a message is outstanding. */ + if ((intf->seq_table[seq].inuse) + && (intf->seq_table[seq].seqid == seqid)) + { + struct seq_table *ent = &(intf->seq_table[seq]); + ent->timeout = ent->orig_timeout; + rv = 0; + } + spin_unlock_irqrestore(&(intf->seq_lock), flags); + + return rv; +} + +/* Got an error for the send message for a specific sequence number. */ +static int intf_err_seq(ipmi_smi_t intf, + long msgid, + unsigned int err) +{ + int rv = -ENODEV; + unsigned long flags; + unsigned char seq; + unsigned long seqid; + struct ipmi_recv_msg *msg = NULL; + + + GET_SEQ_FROM_MSGID(msgid, seq, seqid); + + spin_lock_irqsave(&(intf->seq_lock), flags); + /* We do this verification because the user can be deleted + while a message is outstanding. */ + if ((intf->seq_table[seq].inuse) + && (intf->seq_table[seq].seqid == seqid)) + { + struct seq_table *ent = &(intf->seq_table[seq]); + + ent->inuse = 0; + msg = ent->recv_msg; + rv = 0; + } + spin_unlock_irqrestore(&(intf->seq_lock), flags); + + if (msg) { + msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + msg->msg_data[0] = err; + msg->msg.netfn |= 1; /* Convert to a response. */ + msg->msg.data_len = 1; + msg->msg.data = msg->msg_data; + deliver_response(msg); + } + + return rv; +} + + +int ipmi_create_user(unsigned int if_num, + struct ipmi_user_hndl *handler, + void *handler_data, + ipmi_user_t *user) +{ + unsigned long flags; + ipmi_user_t new_user; + int rv = 0; + ipmi_smi_t intf; + + /* There is no module usecount here, because it's not + required. Since this can only be used by and called from + other modules, they will implicitly use this module, and + thus this can't be removed unless the other modules are + removed. */ + + if (handler == NULL) + return -EINVAL; + + /* Make sure the driver is actually initialized, this handles + problems with initialization order. */ + if (!initialized) { + rv = ipmi_init_msghandler(); + if (rv) + return rv; + + /* The init code doesn't return an error if it was turned + off, but it won't initialize. Check that. */ + if (!initialized) + return -ENODEV; + } + + new_user = kmalloc(sizeof(*new_user), GFP_KERNEL); + if (! new_user) + return -ENOMEM; + + down_read(&interfaces_sem); + if ((if_num > MAX_IPMI_INTERFACES) || ipmi_interfaces[if_num] == NULL) + { + rv = -EINVAL; + goto out_unlock; + } + + intf = ipmi_interfaces[if_num]; + + new_user->handler = handler; + new_user->handler_data = handler_data; + new_user->intf = intf; + new_user->gets_events = 0; + + if (!try_module_get(intf->handlers->owner)) { + rv = -ENODEV; + goto out_unlock; + } + + if (intf->handlers->inc_usecount) { + rv = intf->handlers->inc_usecount(intf->send_info); + if (rv) { + module_put(intf->handlers->owner); + goto out_unlock; + } + } + + write_lock_irqsave(&intf->users_lock, flags); + list_add_tail(&new_user->link, &intf->users); + write_unlock_irqrestore(&intf->users_lock, flags); + + out_unlock: + if (rv) { + kfree(new_user); + } else { + *user = new_user; + } + + up_read(&interfaces_sem); + return rv; +} + +static int ipmi_destroy_user_nolock(ipmi_user_t user) +{ + int rv = -ENODEV; + ipmi_user_t t_user; + struct cmd_rcvr *rcvr, *rcvr2; + int i; + unsigned long flags; + + /* Find the user and delete them from the list. */ + list_for_each_entry(t_user, &(user->intf->users), link) { + if (t_user == user) { + list_del(&t_user->link); + rv = 0; + break; + } + } + + if (rv) { + goto out_unlock; + } + + /* Remove the user from the interfaces sequence table. */ + spin_lock_irqsave(&(user->intf->seq_lock), flags); + for (i=0; iintf->seq_table[i].inuse + && (user->intf->seq_table[i].recv_msg->user == user)) + { + user->intf->seq_table[i].inuse = 0; + } + } + spin_unlock_irqrestore(&(user->intf->seq_lock), flags); + + /* Remove the user from the command receiver's table. */ + write_lock_irqsave(&(user->intf->cmd_rcvr_lock), flags); + list_for_each_entry_safe(rcvr, rcvr2, &(user->intf->cmd_rcvrs), link) { + if (rcvr->user == user) { + list_del(&rcvr->link); + kfree(rcvr); + } + } + write_unlock_irqrestore(&(user->intf->cmd_rcvr_lock), flags); + + kfree(user); + + out_unlock: + + return rv; +} + +int ipmi_destroy_user(ipmi_user_t user) +{ + int rv; + ipmi_smi_t intf = user->intf; + unsigned long flags; + + down_read(&interfaces_sem); + write_lock_irqsave(&intf->users_lock, flags); + rv = ipmi_destroy_user_nolock(user); + if (!rv) { + module_put(intf->handlers->owner); + if (intf->handlers->dec_usecount) + intf->handlers->dec_usecount(intf->send_info); + } + + write_unlock_irqrestore(&intf->users_lock, flags); + up_read(&interfaces_sem); + return rv; +} + +void ipmi_get_version(ipmi_user_t user, + unsigned char *major, + unsigned char *minor) +{ + *major = user->intf->version_major; + *minor = user->intf->version_minor; +} + +void ipmi_set_my_address(ipmi_user_t user, + unsigned char address) +{ + user->intf->my_address = address; +} + +unsigned char ipmi_get_my_address(ipmi_user_t user) +{ + return user->intf->my_address; +} + +void ipmi_set_my_LUN(ipmi_user_t user, + unsigned char LUN) +{ + user->intf->my_lun = LUN & 0x3; +} + +unsigned char ipmi_get_my_LUN(ipmi_user_t user) +{ + return user->intf->my_lun; +} + +int ipmi_set_gets_events(ipmi_user_t user, int val) +{ + unsigned long flags; + struct ipmi_recv_msg *msg, *msg2; + + read_lock(&(user->intf->users_lock)); + spin_lock_irqsave(&(user->intf->events_lock), flags); + user->gets_events = val; + + if (val) { + /* Deliver any queued events. */ + list_for_each_entry_safe(msg, msg2, &(user->intf->waiting_events), link) { + list_del(&msg->link); + msg->user = user; + deliver_response(msg); + } + } + + spin_unlock_irqrestore(&(user->intf->events_lock), flags); + read_unlock(&(user->intf->users_lock)); + + return 0; +} + +int ipmi_register_for_cmd(ipmi_user_t user, + unsigned char netfn, + unsigned char cmd) +{ + struct cmd_rcvr *cmp; + unsigned long flags; + struct cmd_rcvr *rcvr; + int rv = 0; + + + rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL); + if (! rcvr) + return -ENOMEM; + + read_lock(&(user->intf->users_lock)); + write_lock_irqsave(&(user->intf->cmd_rcvr_lock), flags); + if (user->intf->all_cmd_rcvr != NULL) { + rv = -EBUSY; + goto out_unlock; + } + + /* Make sure the command/netfn is not already registered. */ + list_for_each_entry(cmp, &(user->intf->cmd_rcvrs), link) { + if ((cmp->netfn == netfn) && (cmp->cmd == cmd)) { + rv = -EBUSY; + break; + } + } + + if (! rv) { + rcvr->cmd = cmd; + rcvr->netfn = netfn; + rcvr->user = user; + list_add_tail(&(rcvr->link), &(user->intf->cmd_rcvrs)); + } + out_unlock: + write_unlock_irqrestore(&(user->intf->cmd_rcvr_lock), flags); + read_unlock(&(user->intf->users_lock)); + + if (rv) + kfree(rcvr); + + return rv; +} + +int ipmi_unregister_for_cmd(ipmi_user_t user, + unsigned char netfn, + unsigned char cmd) +{ + unsigned long flags; + struct cmd_rcvr *rcvr; + int rv = -ENOENT; + + read_lock(&(user->intf->users_lock)); + write_lock_irqsave(&(user->intf->cmd_rcvr_lock), flags); + /* Make sure the command/netfn is not already registered. */ + list_for_each_entry(rcvr, &(user->intf->cmd_rcvrs), link) { + if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)) { + rv = 0; + list_del(&rcvr->link); + kfree(rcvr); + break; + } + } + write_unlock_irqrestore(&(user->intf->cmd_rcvr_lock), flags); + read_unlock(&(user->intf->users_lock)); + + return rv; +} + +void ipmi_user_set_run_to_completion(ipmi_user_t user, int val) +{ + user->intf->handlers->set_run_to_completion(user->intf->send_info, + val); +} + +static unsigned char +ipmb_checksum(unsigned char *data, int size) +{ + unsigned char csum = 0; + + for (; size > 0; size--, data++) + csum += *data; + + return -csum; +} + +static inline void format_ipmb_msg(struct ipmi_smi_msg *smi_msg, + struct kernel_ipmi_msg *msg, + struct ipmi_ipmb_addr *ipmb_addr, + long msgid, + unsigned char ipmb_seq, + int broadcast, + unsigned char source_address, + unsigned char source_lun) +{ + int i = broadcast; + + /* Format the IPMB header data. */ + smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + smi_msg->data[1] = IPMI_SEND_MSG_CMD; + smi_msg->data[2] = ipmb_addr->channel; + if (broadcast) + smi_msg->data[3] = 0; + smi_msg->data[i+3] = ipmb_addr->slave_addr; + smi_msg->data[i+4] = (msg->netfn << 2) | (ipmb_addr->lun & 0x3); + smi_msg->data[i+5] = ipmb_checksum(&(smi_msg->data[i+3]), 2); + smi_msg->data[i+6] = source_address; + smi_msg->data[i+7] = (ipmb_seq << 2) | source_lun; + smi_msg->data[i+8] = msg->cmd; + + /* Now tack on the data to the message. */ + if (msg->data_len > 0) + memcpy(&(smi_msg->data[i+9]), msg->data, + msg->data_len); + smi_msg->data_size = msg->data_len + 9; + + /* Now calculate the checksum and tack it on. */ + smi_msg->data[i+smi_msg->data_size] + = ipmb_checksum(&(smi_msg->data[i+6]), + smi_msg->data_size-6); + + /* Add on the checksum size and the offset from the + broadcast. */ + smi_msg->data_size += 1 + i; + + smi_msg->msgid = msgid; +} + +static inline void format_lan_msg(struct ipmi_smi_msg *smi_msg, + struct kernel_ipmi_msg *msg, + struct ipmi_lan_addr *lan_addr, + long msgid, + unsigned char ipmb_seq, + unsigned char source_lun) +{ + /* Format the IPMB header data. */ + smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + smi_msg->data[1] = IPMI_SEND_MSG_CMD; + smi_msg->data[2] = lan_addr->channel; + smi_msg->data[3] = lan_addr->session_handle; + smi_msg->data[4] = lan_addr->remote_SWID; + smi_msg->data[5] = (msg->netfn << 2) | (lan_addr->lun & 0x3); + smi_msg->data[6] = ipmb_checksum(&(smi_msg->data[4]), 2); + smi_msg->data[7] = lan_addr->local_SWID; + smi_msg->data[8] = (ipmb_seq << 2) | source_lun; + smi_msg->data[9] = msg->cmd; + + /* Now tack on the data to the message. */ + if (msg->data_len > 0) + memcpy(&(smi_msg->data[10]), msg->data, + msg->data_len); + smi_msg->data_size = msg->data_len + 10; + + /* Now calculate the checksum and tack it on. */ + smi_msg->data[smi_msg->data_size] + = ipmb_checksum(&(smi_msg->data[7]), + smi_msg->data_size-7); + + /* Add on the checksum size and the offset from the + broadcast. */ + smi_msg->data_size += 1; + + smi_msg->msgid = msgid; +} + +/* Separate from ipmi_request so that the user does not have to be + supplied in certain circumstances (mainly at panic time). If + messages are supplied, they will be freed, even if an error + occurs. */ +static inline int i_ipmi_request(ipmi_user_t user, + ipmi_smi_t intf, + struct ipmi_addr *addr, + long msgid, + struct kernel_ipmi_msg *msg, + void *user_msg_data, + void *supplied_smi, + struct ipmi_recv_msg *supplied_recv, + int priority, + unsigned char source_address, + unsigned char source_lun, + int retries, + unsigned int retry_time_ms) +{ + int rv = 0; + struct ipmi_smi_msg *smi_msg; + struct ipmi_recv_msg *recv_msg; + unsigned long flags; + + + if (supplied_recv) { + recv_msg = supplied_recv; + } else { + recv_msg = ipmi_alloc_recv_msg(); + if (recv_msg == NULL) { + return -ENOMEM; + } + } + recv_msg->user_msg_data = user_msg_data; + + if (supplied_smi) { + smi_msg = (struct ipmi_smi_msg *) supplied_smi; + } else { + smi_msg = ipmi_alloc_smi_msg(); + if (smi_msg == NULL) { + ipmi_free_recv_msg(recv_msg); + return -ENOMEM; + } + } + + recv_msg->user = user; + recv_msg->msgid = msgid; + /* Store the message to send in the receive message so timeout + responses can get the proper response data. */ + recv_msg->msg = *msg; + + if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { + struct ipmi_system_interface_addr *smi_addr; + + if (msg->netfn & 1) { + /* Responses are not allowed to the SMI. */ + rv = -EINVAL; + goto out_err; + } + + smi_addr = (struct ipmi_system_interface_addr *) addr; + if (smi_addr->lun > 3) { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + + memcpy(&recv_msg->addr, smi_addr, sizeof(*smi_addr)); + + if ((msg->netfn == IPMI_NETFN_APP_REQUEST) + && ((msg->cmd == IPMI_SEND_MSG_CMD) + || (msg->cmd == IPMI_GET_MSG_CMD) + || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD))) + { + /* We don't let the user do these, since we manage + the sequence numbers. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + + if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EMSGSIZE; + goto out_err; + } + + smi_msg->data[0] = (msg->netfn << 2) | (smi_addr->lun & 0x3); + smi_msg->data[1] = msg->cmd; + smi_msg->msgid = msgid; + smi_msg->user_data = recv_msg; + if (msg->data_len > 0) + memcpy(&(smi_msg->data[2]), msg->data, msg->data_len); + smi_msg->data_size = msg->data_len + 2; + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_local_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + } else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) + || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) + { + struct ipmi_ipmb_addr *ipmb_addr; + unsigned char ipmb_seq; + long seqid; + int broadcast = 0; + + if (addr->channel > IPMI_NUM_CHANNELS) { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + + if (intf->channels[addr->channel].medium + != IPMI_CHANNEL_MEDIUM_IPMB) + { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + + if (retries < 0) { + if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) + retries = 0; /* Don't retry broadcasts. */ + else + retries = 4; + } + if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) { + /* Broadcasts add a zero at the beginning of the + message, but otherwise is the same as an IPMB + address. */ + addr->addr_type = IPMI_IPMB_ADDR_TYPE; + broadcast = 1; + } + + + /* Default to 1 second retries. */ + if (retry_time_ms == 0) + retry_time_ms = 1000; + + /* 9 for the header and 1 for the checksum, plus + possibly one for the broadcast. */ + if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EMSGSIZE; + goto out_err; + } + + ipmb_addr = (struct ipmi_ipmb_addr *) addr; + if (ipmb_addr->lun > 3) { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + + memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr)); + + if (recv_msg->msg.netfn & 0x1) { + /* It's a response, so use the user's sequence + from msgid. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_ipmb_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid, + msgid, broadcast, + source_address, source_lun); + + /* Save the receive message so we can use it + to deliver the response. */ + smi_msg->user_data = recv_msg; + } else { + /* It's a command, so get a sequence for it. */ + + spin_lock_irqsave(&(intf->seq_lock), flags); + + spin_lock(&intf->counter_lock); + intf->sent_ipmb_commands++; + spin_unlock(&intf->counter_lock); + + /* Create a sequence number with a 1 second + timeout and 4 retries. */ + rv = intf_next_seq(intf, + recv_msg, + retry_time_ms, + retries, + broadcast, + &ipmb_seq, + &seqid); + if (rv) { + /* We have used up all the sequence numbers, + probably, so abort. */ + spin_unlock_irqrestore(&(intf->seq_lock), + flags); + goto out_err; + } + + /* Store the sequence number in the message, + so that when the send message response + comes back we can start the timer. */ + format_ipmb_msg(smi_msg, msg, ipmb_addr, + STORE_SEQ_IN_MSGID(ipmb_seq, seqid), + ipmb_seq, broadcast, + source_address, source_lun); + + /* Copy the message into the recv message data, so we + can retransmit it later if necessary. */ + memcpy(recv_msg->msg_data, smi_msg->data, + smi_msg->data_size); + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = smi_msg->data_size; + + /* We don't unlock until here, because we need + to copy the completed message into the + recv_msg before we release the lock. + Otherwise, race conditions may bite us. I + know that's pretty paranoid, but I prefer + to be correct. */ + spin_unlock_irqrestore(&(intf->seq_lock), flags); + } + } else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { + struct ipmi_lan_addr *lan_addr; + unsigned char ipmb_seq; + long seqid; + + if (addr->channel > IPMI_NUM_CHANNELS) { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + + if ((intf->channels[addr->channel].medium + != IPMI_CHANNEL_MEDIUM_8023LAN) + && (intf->channels[addr->channel].medium + != IPMI_CHANNEL_MEDIUM_ASYNC)) + { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + + retries = 4; + + /* Default to 1 second retries. */ + if (retry_time_ms == 0) + retry_time_ms = 1000; + + /* 11 for the header and 1 for the checksum. */ + if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EMSGSIZE; + goto out_err; + } + + lan_addr = (struct ipmi_lan_addr *) addr; + if (lan_addr->lun > 3) { + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + + memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr)); + + if (recv_msg->msg.netfn & 0x1) { + /* It's a response, so use the user's sequence + from msgid. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_lan_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + format_lan_msg(smi_msg, msg, lan_addr, msgid, + msgid, source_lun); + + /* Save the receive message so we can use it + to deliver the response. */ + smi_msg->user_data = recv_msg; + } else { + /* It's a command, so get a sequence for it. */ + + spin_lock_irqsave(&(intf->seq_lock), flags); + + spin_lock(&intf->counter_lock); + intf->sent_lan_commands++; + spin_unlock(&intf->counter_lock); + + /* Create a sequence number with a 1 second + timeout and 4 retries. */ + rv = intf_next_seq(intf, + recv_msg, + retry_time_ms, + retries, + 0, + &ipmb_seq, + &seqid); + if (rv) { + /* We have used up all the sequence numbers, + probably, so abort. */ + spin_unlock_irqrestore(&(intf->seq_lock), + flags); + goto out_err; + } + + /* Store the sequence number in the message, + so that when the send message response + comes back we can start the timer. */ + format_lan_msg(smi_msg, msg, lan_addr, + STORE_SEQ_IN_MSGID(ipmb_seq, seqid), + ipmb_seq, source_lun); + + /* Copy the message into the recv message data, so we + can retransmit it later if necessary. */ + memcpy(recv_msg->msg_data, smi_msg->data, + smi_msg->data_size); + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = smi_msg->data_size; + + /* We don't unlock until here, because we need + to copy the completed message into the + recv_msg before we release the lock. + Otherwise, race conditions may bite us. I + know that's pretty paranoid, but I prefer + to be correct. */ + spin_unlock_irqrestore(&(intf->seq_lock), flags); + } + } else { + /* Unknown address type. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->sent_invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + rv = -EINVAL; + goto out_err; + } + +#ifdef DEBUG_MSGING + { + int m; + for (m=0; mdata_size; m++) + printk(" %2.2x", smi_msg->data[m]); + printk("\n"); + } +#endif + intf->handlers->sender(intf->send_info, smi_msg, priority); + + return 0; + + out_err: + ipmi_free_smi_msg(smi_msg); + ipmi_free_recv_msg(recv_msg); + return rv; +} + +int ipmi_request_settime(ipmi_user_t user, + struct ipmi_addr *addr, + long msgid, + struct kernel_ipmi_msg *msg, + void *user_msg_data, + int priority, + int retries, + unsigned int retry_time_ms) +{ + return i_ipmi_request(user, + user->intf, + addr, + msgid, + msg, + user_msg_data, + NULL, NULL, + priority, + user->intf->my_address, + user->intf->my_lun, + retries, + retry_time_ms); +} + +int ipmi_request_supply_msgs(ipmi_user_t user, + struct ipmi_addr *addr, + long msgid, + struct kernel_ipmi_msg *msg, + void *user_msg_data, + void *supplied_smi, + struct ipmi_recv_msg *supplied_recv, + int priority) +{ + return i_ipmi_request(user, + user->intf, + addr, + msgid, + msg, + user_msg_data, + supplied_smi, + supplied_recv, + priority, + user->intf->my_address, + user->intf->my_lun, + -1, 0); +} + +static int ipmb_file_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *out = (char *) page; + ipmi_smi_t intf = data; + + return sprintf(out, "%x\n", intf->my_address); +} + +static int version_file_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *out = (char *) page; + ipmi_smi_t intf = data; + + return sprintf(out, "%d.%d\n", + intf->version_major, intf->version_minor); +} + +static int stat_file_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *out = (char *) page; + ipmi_smi_t intf = data; + + out += sprintf(out, "sent_invalid_commands: %d\n", + intf->sent_invalid_commands); + out += sprintf(out, "sent_local_commands: %d\n", + intf->sent_local_commands); + out += sprintf(out, "handled_local_responses: %d\n", + intf->handled_local_responses); + out += sprintf(out, "unhandled_local_responses: %d\n", + intf->unhandled_local_responses); + out += sprintf(out, "sent_ipmb_commands: %d\n", + intf->sent_ipmb_commands); + out += sprintf(out, "sent_ipmb_command_errs: %d\n", + intf->sent_ipmb_command_errs); + out += sprintf(out, "retransmitted_ipmb_commands: %d\n", + intf->retransmitted_ipmb_commands); + out += sprintf(out, "timed_out_ipmb_commands: %d\n", + intf->timed_out_ipmb_commands); + out += sprintf(out, "timed_out_ipmb_broadcasts: %d\n", + intf->timed_out_ipmb_broadcasts); + out += sprintf(out, "sent_ipmb_responses: %d\n", + intf->sent_ipmb_responses); + out += sprintf(out, "handled_ipmb_responses: %d\n", + intf->handled_ipmb_responses); + out += sprintf(out, "invalid_ipmb_responses: %d\n", + intf->invalid_ipmb_responses); + out += sprintf(out, "unhandled_ipmb_responses: %d\n", + intf->unhandled_ipmb_responses); + out += sprintf(out, "sent_lan_commands: %d\n", + intf->sent_lan_commands); + out += sprintf(out, "sent_lan_command_errs: %d\n", + intf->sent_lan_command_errs); + out += sprintf(out, "retransmitted_lan_commands: %d\n", + intf->retransmitted_lan_commands); + out += sprintf(out, "timed_out_lan_commands: %d\n", + intf->timed_out_lan_commands); + out += sprintf(out, "sent_lan_responses: %d\n", + intf->sent_lan_responses); + out += sprintf(out, "handled_lan_responses: %d\n", + intf->handled_lan_responses); + out += sprintf(out, "invalid_lan_responses: %d\n", + intf->invalid_lan_responses); + out += sprintf(out, "unhandled_lan_responses: %d\n", + intf->unhandled_lan_responses); + out += sprintf(out, "handled_commands: %d\n", + intf->handled_commands); + out += sprintf(out, "invalid_commands: %d\n", + intf->invalid_commands); + out += sprintf(out, "unhandled_commands: %d\n", + intf->unhandled_commands); + out += sprintf(out, "invalid_events: %d\n", + intf->invalid_events); + out += sprintf(out, "events: %d\n", + intf->events); + + return (out - ((char *) page)); +} + +int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, + read_proc_t *read_proc, write_proc_t *write_proc, + void *data, struct module *owner) +{ + struct proc_dir_entry *file; + int rv = 0; + struct ipmi_proc_entry *entry; + + /* Create a list element. */ + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + entry->name = kmalloc(strlen(name)+1, GFP_KERNEL); + if (!entry->name) { + kfree(entry); + return -ENOMEM; + } + strcpy(entry->name, name); + + file = create_proc_entry(name, 0, smi->proc_dir); + if (!file) { + kfree(entry->name); + kfree(entry); + rv = -ENOMEM; + } else { + file->nlink = 1; + file->data = data; + file->read_proc = read_proc; + file->write_proc = write_proc; + file->owner = owner; + + /* Stick it on the list. */ + entry->next = smi->proc_entries; + smi->proc_entries = entry; + } + + return rv; +} + +static int add_proc_entries(ipmi_smi_t smi, int num) +{ + int rv = 0; + + sprintf(smi->proc_dir_name, "%d", num); + smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root); + if (!smi->proc_dir) + rv = -ENOMEM; + else { + smi->proc_dir->owner = THIS_MODULE; + } + + if (rv == 0) + rv = ipmi_smi_add_proc_entry(smi, "stats", + stat_file_read_proc, NULL, + smi, THIS_MODULE); + + if (rv == 0) + rv = ipmi_smi_add_proc_entry(smi, "ipmb", + ipmb_file_read_proc, NULL, + smi, THIS_MODULE); + + if (rv == 0) + rv = ipmi_smi_add_proc_entry(smi, "version", + version_file_read_proc, NULL, + smi, THIS_MODULE); + + return rv; +} + +static void remove_proc_entries(ipmi_smi_t smi) +{ + struct ipmi_proc_entry *entry; + + while (smi->proc_entries) { + entry = smi->proc_entries; + smi->proc_entries = entry->next; + + remove_proc_entry(entry->name, smi->proc_dir); + kfree(entry->name); + kfree(entry); + } + remove_proc_entry(smi->proc_dir_name, proc_ipmi_root); +} + +static int +send_channel_info_cmd(ipmi_smi_t intf, int chan) +{ + struct kernel_ipmi_msg msg; + unsigned char data[1]; + struct ipmi_system_interface_addr si; + + si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + si.channel = IPMI_BMC_CHANNEL; + si.lun = 0; + + msg.netfn = IPMI_NETFN_APP_REQUEST; + msg.cmd = IPMI_GET_CHANNEL_INFO_CMD; + msg.data = data; + msg.data_len = 1; + data[0] = chan; + return i_ipmi_request(NULL, + intf, + (struct ipmi_addr *) &si, + 0, + &msg, + NULL, + NULL, + NULL, + 0, + intf->my_address, + intf->my_lun, + -1, 0); +} + +static void +channel_handler(ipmi_smi_t intf, struct ipmi_smi_msg *msg) +{ + int rv = 0; + int chan; + + if ((msg->rsp[0] == (IPMI_NETFN_APP_RESPONSE << 2)) + && (msg->rsp[1] == IPMI_GET_CHANNEL_INFO_CMD)) + { + /* It's the one we want */ + if (msg->rsp[2] != 0) { + /* Got an error from the channel, just go on. */ + + if (msg->rsp[2] == IPMI_INVALID_COMMAND_ERR) { + /* If the MC does not support this + command, that is legal. We just + assume it has one IPMB at channel + zero. */ + intf->channels[0].medium + = IPMI_CHANNEL_MEDIUM_IPMB; + intf->channels[0].protocol + = IPMI_CHANNEL_PROTOCOL_IPMB; + rv = -ENOSYS; + + intf->curr_channel = IPMI_MAX_CHANNELS; + wake_up(&intf->waitq); + goto out; + } + goto next_channel; + } + if (msg->rsp_size < 6) { + /* Message not big enough, just go on. */ + goto next_channel; + } + chan = intf->curr_channel; + intf->channels[chan].medium = msg->rsp[4] & 0x7f; + intf->channels[chan].protocol = msg->rsp[5] & 0x1f; + + next_channel: + intf->curr_channel++; + if (intf->curr_channel >= IPMI_MAX_CHANNELS) + wake_up(&intf->waitq); + else + rv = send_channel_info_cmd(intf, intf->curr_channel); + + if (rv) { + /* Got an error somehow, just give up. */ + intf->curr_channel = IPMI_MAX_CHANNELS; + wake_up(&intf->waitq); + + printk(KERN_WARNING PFX + "Error sending channel information: %d\n", + rv); + } + } + out: + return; +} + +int ipmi_register_smi(struct ipmi_smi_handlers *handlers, + void *send_info, + unsigned char version_major, + unsigned char version_minor, + unsigned char slave_addr, + ipmi_smi_t *intf) +{ + int i, j; + int rv; + ipmi_smi_t new_intf; + unsigned long flags; + + + /* Make sure the driver is actually initialized, this handles + problems with initialization order. */ + if (!initialized) { + rv = ipmi_init_msghandler(); + if (rv) + return rv; + /* The init code doesn't return an error if it was turned + off, but it won't initialize. Check that. */ + if (!initialized) + return -ENODEV; + } + + new_intf = kmalloc(sizeof(*new_intf), GFP_KERNEL); + if (!new_intf) + return -ENOMEM; + memset(new_intf, 0, sizeof(*new_intf)); + + new_intf->proc_dir = NULL; + + rv = -ENOMEM; + + down_write(&interfaces_sem); + for (i=0; iintf_num = i; + new_intf->version_major = version_major; + new_intf->version_minor = version_minor; + if (slave_addr == 0) + new_intf->my_address = IPMI_BMC_SLAVE_ADDR; + else + new_intf->my_address = slave_addr; + new_intf->my_lun = 2; /* the SMS LUN. */ + rwlock_init(&(new_intf->users_lock)); + INIT_LIST_HEAD(&(new_intf->users)); + new_intf->handlers = handlers; + new_intf->send_info = send_info; + spin_lock_init(&(new_intf->seq_lock)); + for (j=0; jseq_table[j].inuse = 0; + new_intf->seq_table[j].seqid = 0; + } + new_intf->curr_seq = 0; + spin_lock_init(&(new_intf->waiting_msgs_lock)); + INIT_LIST_HEAD(&(new_intf->waiting_msgs)); + spin_lock_init(&(new_intf->events_lock)); + INIT_LIST_HEAD(&(new_intf->waiting_events)); + new_intf->waiting_events_count = 0; + rwlock_init(&(new_intf->cmd_rcvr_lock)); + init_waitqueue_head(&new_intf->waitq); + INIT_LIST_HEAD(&(new_intf->cmd_rcvrs)); + new_intf->all_cmd_rcvr = NULL; + + spin_lock_init(&(new_intf->counter_lock)); + + spin_lock_irqsave(&interfaces_lock, flags); + ipmi_interfaces[i] = new_intf; + spin_unlock_irqrestore(&interfaces_lock, flags); + + rv = 0; + *intf = new_intf; + break; + } + } + + downgrade_write(&interfaces_sem); + + if (rv == 0) + rv = add_proc_entries(*intf, i); + + if (rv == 0) { + if ((version_major > 1) + || ((version_major == 1) && (version_minor >= 5))) + { + /* Start scanning the channels to see what is + available. */ + (*intf)->null_user_handler = channel_handler; + (*intf)->curr_channel = 0; + rv = send_channel_info_cmd(*intf, 0); + if (rv) + goto out; + + /* Wait for the channel info to be read. */ + up_read(&interfaces_sem); + wait_event((*intf)->waitq, + ((*intf)->curr_channel>=IPMI_MAX_CHANNELS)); + down_read(&interfaces_sem); + + if (ipmi_interfaces[i] != new_intf) + /* Well, it went away. Just return. */ + goto out; + } else { + /* Assume a single IPMB channel at zero. */ + (*intf)->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; + (*intf)->channels[0].protocol + = IPMI_CHANNEL_PROTOCOL_IPMB; + } + + /* Call all the watcher interfaces to tell + them that a new interface is available. */ + call_smi_watchers(i); + } + + out: + up_read(&interfaces_sem); + + if (rv) { + if (new_intf->proc_dir) + remove_proc_entries(new_intf); + kfree(new_intf); + } + + return rv; +} + +static void free_recv_msg_list(struct list_head *q) +{ + struct ipmi_recv_msg *msg, *msg2; + + list_for_each_entry_safe(msg, msg2, q, link) { + list_del(&msg->link); + ipmi_free_recv_msg(msg); + } +} + +static void free_cmd_rcvr_list(struct list_head *q) +{ + struct cmd_rcvr *rcvr, *rcvr2; + + list_for_each_entry_safe(rcvr, rcvr2, q, link) { + list_del(&rcvr->link); + kfree(rcvr); + } +} + +static void clean_up_interface_data(ipmi_smi_t intf) +{ + int i; + + free_recv_msg_list(&(intf->waiting_msgs)); + free_recv_msg_list(&(intf->waiting_events)); + free_cmd_rcvr_list(&(intf->cmd_rcvrs)); + + for (i=0; iseq_table[i].inuse) + && (intf->seq_table[i].recv_msg)) + { + ipmi_free_recv_msg(intf->seq_table[i].recv_msg); + } + } +} + +int ipmi_unregister_smi(ipmi_smi_t intf) +{ + int rv = -ENODEV; + int i; + struct ipmi_smi_watcher *w; + unsigned long flags; + + down_write(&interfaces_sem); + if (list_empty(&(intf->users))) + { + for (i=0; ismi_gone(i); + } + up_read(&smi_watchers_sem); + up_read(&interfaces_sem); + return 0; +} + +static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct ipmi_ipmb_addr ipmb_addr; + struct ipmi_recv_msg *recv_msg; + unsigned long flags; + + + /* This is 11, not 10, because the response must contain a + * completion code. */ + if (msg->rsp_size < 11) { + /* Message not big enough, just ignore it. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->invalid_ipmb_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb_addr.slave_addr = msg->rsp[6]; + ipmb_addr.channel = msg->rsp[3] & 0x0f; + ipmb_addr.lun = msg->rsp[7] & 3; + + /* It's a response from a remote entity. Look up the sequence + number and handle the response. */ + if (intf_find_seq(intf, + msg->rsp[7] >> 2, + msg->rsp[3] & 0x0f, + msg->rsp[8], + (msg->rsp[4] >> 2) & (~1), + (struct ipmi_addr *) &(ipmb_addr), + &recv_msg)) + { + /* We were unable to find the sequence number, + so just nuke the message. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->unhandled_ipmb_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + return 0; + } + + memcpy(recv_msg->msg_data, + &(msg->rsp[9]), + msg->rsp_size - 9); + /* THe other fields matched, so no need to set them, except + for netfn, which needs to be the response that was + returned, not the request value. */ + recv_msg->msg.netfn = msg->rsp[4] >> 2; + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = msg->rsp_size - 10; + recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + spin_lock_irqsave(&intf->counter_lock, flags); + intf->handled_ipmb_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + deliver_response(recv_msg); + + return 0; +} + +static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct cmd_rcvr *rcvr; + int rv = 0; + unsigned char netfn; + unsigned char cmd; + ipmi_user_t user = NULL; + struct ipmi_ipmb_addr *ipmb_addr; + struct ipmi_recv_msg *recv_msg; + unsigned long flags; + + if (msg->rsp_size < 10) { + /* Message not big enough, just ignore it. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + netfn = msg->rsp[4] >> 2; + cmd = msg->rsp[8]; + + read_lock(&(intf->cmd_rcvr_lock)); + + if (intf->all_cmd_rcvr) { + user = intf->all_cmd_rcvr; + } else { + /* Find the command/netfn. */ + list_for_each_entry(rcvr, &(intf->cmd_rcvrs), link) { + if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)) { + user = rcvr->user; + break; + } + } + } + read_unlock(&(intf->cmd_rcvr_lock)); + + if (user == NULL) { + /* We didn't find a user, deliver an error response. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->unhandled_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + + msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg->data[1] = IPMI_SEND_MSG_CMD; + msg->data[2] = msg->rsp[3]; + msg->data[3] = msg->rsp[6]; + msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3); + msg->data[5] = ipmb_checksum(&(msg->data[3]), 2); + msg->data[6] = intf->my_address; + /* rqseq/lun */ + msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3); + msg->data[8] = msg->rsp[8]; /* cmd */ + msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE; + msg->data[10] = ipmb_checksum(&(msg->data[6]), 4); + msg->data_size = 11; + +#ifdef DEBUG_MSGING + { + int m; + printk("Invalid command:"); + for (m=0; mdata_size; m++) + printk(" %2.2x", msg->data[m]); + printk("\n"); + } +#endif + intf->handlers->sender(intf->send_info, msg, 0); + + rv = -1; /* We used the message, so return the value that + causes it to not be freed or queued. */ + } else { + /* Deliver the message to the user. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->handled_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + + recv_msg = ipmi_alloc_recv_msg(); + if (! recv_msg) { + /* We couldn't allocate memory for the + message, so requeue it for handling + later. */ + rv = 1; + } else { + /* Extract the source address from the data. */ + ipmb_addr = (struct ipmi_ipmb_addr *) &recv_msg->addr; + ipmb_addr->addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb_addr->slave_addr = msg->rsp[6]; + ipmb_addr->lun = msg->rsp[7] & 3; + ipmb_addr->channel = msg->rsp[3] & 0xf; + + /* Extract the rest of the message information + from the IPMB header.*/ + recv_msg->user = user; + recv_msg->recv_type = IPMI_CMD_RECV_TYPE; + recv_msg->msgid = msg->rsp[7] >> 2; + recv_msg->msg.netfn = msg->rsp[4] >> 2; + recv_msg->msg.cmd = msg->rsp[8]; + recv_msg->msg.data = recv_msg->msg_data; + + /* We chop off 10, not 9 bytes because the checksum + at the end also needs to be removed. */ + recv_msg->msg.data_len = msg->rsp_size - 10; + memcpy(recv_msg->msg_data, + &(msg->rsp[9]), + msg->rsp_size - 10); + deliver_response(recv_msg); + } + } + + return rv; +} + +static int handle_lan_get_msg_rsp(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct ipmi_lan_addr lan_addr; + struct ipmi_recv_msg *recv_msg; + unsigned long flags; + + + /* This is 13, not 12, because the response must contain a + * completion code. */ + if (msg->rsp_size < 13) { + /* Message not big enough, just ignore it. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->invalid_lan_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + lan_addr.addr_type = IPMI_LAN_ADDR_TYPE; + lan_addr.session_handle = msg->rsp[4]; + lan_addr.remote_SWID = msg->rsp[8]; + lan_addr.local_SWID = msg->rsp[5]; + lan_addr.channel = msg->rsp[3] & 0x0f; + lan_addr.privilege = msg->rsp[3] >> 4; + lan_addr.lun = msg->rsp[9] & 3; + + /* It's a response from a remote entity. Look up the sequence + number and handle the response. */ + if (intf_find_seq(intf, + msg->rsp[9] >> 2, + msg->rsp[3] & 0x0f, + msg->rsp[10], + (msg->rsp[6] >> 2) & (~1), + (struct ipmi_addr *) &(lan_addr), + &recv_msg)) + { + /* We were unable to find the sequence number, + so just nuke the message. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->unhandled_lan_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + return 0; + } + + memcpy(recv_msg->msg_data, + &(msg->rsp[11]), + msg->rsp_size - 11); + /* The other fields matched, so no need to set them, except + for netfn, which needs to be the response that was + returned, not the request value. */ + recv_msg->msg.netfn = msg->rsp[6] >> 2; + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = msg->rsp_size - 12; + recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + spin_lock_irqsave(&intf->counter_lock, flags); + intf->handled_lan_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + deliver_response(recv_msg); + + return 0; +} + +static int handle_lan_get_msg_cmd(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct cmd_rcvr *rcvr; + int rv = 0; + unsigned char netfn; + unsigned char cmd; + ipmi_user_t user = NULL; + struct ipmi_lan_addr *lan_addr; + struct ipmi_recv_msg *recv_msg; + unsigned long flags; + + if (msg->rsp_size < 12) { + /* Message not big enough, just ignore it. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->invalid_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the response, just ignore it. */ + return 0; + } + + netfn = msg->rsp[6] >> 2; + cmd = msg->rsp[10]; + + read_lock(&(intf->cmd_rcvr_lock)); + + if (intf->all_cmd_rcvr) { + user = intf->all_cmd_rcvr; + } else { + /* Find the command/netfn. */ + list_for_each_entry(rcvr, &(intf->cmd_rcvrs), link) { + if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)) { + user = rcvr->user; + break; + } + } + } + read_unlock(&(intf->cmd_rcvr_lock)); + + if (user == NULL) { + /* We didn't find a user, deliver an error response. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->unhandled_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + + rv = 0; /* Don't do anything with these messages, just + allow them to be freed. */ + } else { + /* Deliver the message to the user. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->handled_commands++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + + recv_msg = ipmi_alloc_recv_msg(); + if (! recv_msg) { + /* We couldn't allocate memory for the + message, so requeue it for handling + later. */ + rv = 1; + } else { + /* Extract the source address from the data. */ + lan_addr = (struct ipmi_lan_addr *) &recv_msg->addr; + lan_addr->addr_type = IPMI_LAN_ADDR_TYPE; + lan_addr->session_handle = msg->rsp[4]; + lan_addr->remote_SWID = msg->rsp[8]; + lan_addr->local_SWID = msg->rsp[5]; + lan_addr->lun = msg->rsp[9] & 3; + lan_addr->channel = msg->rsp[3] & 0xf; + lan_addr->privilege = msg->rsp[3] >> 4; + + /* Extract the rest of the message information + from the IPMB header.*/ + recv_msg->user = user; + recv_msg->recv_type = IPMI_CMD_RECV_TYPE; + recv_msg->msgid = msg->rsp[9] >> 2; + recv_msg->msg.netfn = msg->rsp[6] >> 2; + recv_msg->msg.cmd = msg->rsp[10]; + recv_msg->msg.data = recv_msg->msg_data; + + /* We chop off 12, not 11 bytes because the checksum + at the end also needs to be removed. */ + recv_msg->msg.data_len = msg->rsp_size - 12; + memcpy(recv_msg->msg_data, + &(msg->rsp[11]), + msg->rsp_size - 12); + deliver_response(recv_msg); + } + } + + return rv; +} + +static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg, + struct ipmi_smi_msg *msg) +{ + struct ipmi_system_interface_addr *smi_addr; + + recv_msg->msgid = 0; + smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr); + smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr->channel = IPMI_BMC_CHANNEL; + smi_addr->lun = msg->rsp[0] & 3; + recv_msg->recv_type = IPMI_ASYNC_EVENT_RECV_TYPE; + recv_msg->msg.netfn = msg->rsp[0] >> 2; + recv_msg->msg.cmd = msg->rsp[1]; + memcpy(recv_msg->msg_data, &(msg->rsp[3]), msg->rsp_size - 3); + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = msg->rsp_size - 3; +} + +/* This will be called with the intf->users_lock read-locked, so no need + to do that here. */ +static int handle_read_event_rsp(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct ipmi_recv_msg *recv_msg, *recv_msg2; + struct list_head msgs; + ipmi_user_t user; + int rv = 0; + int deliver_count = 0; + unsigned long flags; + + if (msg->rsp_size < 19) { + /* Message is too small to be an IPMB event. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->invalid_events++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + return 0; + } + + if (msg->rsp[2] != 0) { + /* An error getting the event, just ignore it. */ + return 0; + } + + INIT_LIST_HEAD(&msgs); + + spin_lock_irqsave(&(intf->events_lock), flags); + + spin_lock(&intf->counter_lock); + intf->events++; + spin_unlock(&intf->counter_lock); + + /* Allocate and fill in one message for every user that is getting + events. */ + list_for_each_entry(user, &(intf->users), link) { + if (! user->gets_events) + continue; + + recv_msg = ipmi_alloc_recv_msg(); + if (! recv_msg) { + list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) { + list_del(&recv_msg->link); + ipmi_free_recv_msg(recv_msg); + } + /* We couldn't allocate memory for the + message, so requeue it for handling + later. */ + rv = 1; + goto out; + } + + deliver_count++; + + copy_event_into_recv_msg(recv_msg, msg); + recv_msg->user = user; + list_add_tail(&(recv_msg->link), &msgs); + } + + if (deliver_count) { + /* Now deliver all the messages. */ + list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) { + list_del(&recv_msg->link); + deliver_response(recv_msg); + } + } else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) { + /* No one to receive the message, put it in queue if there's + not already too many things in the queue. */ + recv_msg = ipmi_alloc_recv_msg(); + if (! recv_msg) { + /* We couldn't allocate memory for the + message, so requeue it for handling + later. */ + rv = 1; + goto out; + } + + copy_event_into_recv_msg(recv_msg, msg); + list_add_tail(&(recv_msg->link), &(intf->waiting_events)); + } else { + /* There's too many things in the queue, discard this + message. */ + printk(KERN_WARNING PFX "Event queue full, discarding an" + " incoming event\n"); + } + + out: + spin_unlock_irqrestore(&(intf->events_lock), flags); + + return rv; +} + +static int handle_bmc_rsp(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + struct ipmi_recv_msg *recv_msg; + int found = 0; + struct ipmi_user *user; + unsigned long flags; + + recv_msg = (struct ipmi_recv_msg *) msg->user_data; + + /* Make sure the user still exists. */ + list_for_each_entry(user, &(intf->users), link) { + if (user == recv_msg->user) { + /* Found it, so we can deliver it */ + found = 1; + break; + } + } + + if (!found) { + /* Special handling for NULL users. */ + if (!recv_msg->user && intf->null_user_handler){ + intf->null_user_handler(intf, msg); + spin_lock_irqsave(&intf->counter_lock, flags); + intf->handled_local_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + }else{ + /* The user for the message went away, so give up. */ + spin_lock_irqsave(&intf->counter_lock, flags); + intf->unhandled_local_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + } + ipmi_free_recv_msg(recv_msg); + } else { + struct ipmi_system_interface_addr *smi_addr; + + spin_lock_irqsave(&intf->counter_lock, flags); + intf->handled_local_responses++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + recv_msg->msgid = msg->msgid; + smi_addr = ((struct ipmi_system_interface_addr *) + &(recv_msg->addr)); + smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr->channel = IPMI_BMC_CHANNEL; + smi_addr->lun = msg->rsp[0] & 3; + recv_msg->msg.netfn = msg->rsp[0] >> 2; + recv_msg->msg.cmd = msg->rsp[1]; + memcpy(recv_msg->msg_data, + &(msg->rsp[2]), + msg->rsp_size - 2); + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = msg->rsp_size - 2; + deliver_response(recv_msg); + } + + return 0; +} + +/* Handle a new message. Return 1 if the message should be requeued, + 0 if the message should be freed, or -1 if the message should not + be freed or requeued. */ +static int handle_new_recv_msg(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + int requeue; + int chan; + +#ifdef DEBUG_MSGING + int m; + printk("Recv:"); + for (m=0; mrsp_size; m++) + printk(" %2.2x", msg->rsp[m]); + printk("\n"); +#endif + if (msg->rsp_size < 2) { + /* Message is too small to be correct. */ + printk(KERN_WARNING PFX "BMC returned to small a message" + " for netfn %x cmd %x, got %d bytes\n", + (msg->data[0] >> 2) | 1, msg->data[1], msg->rsp_size); + + /* Generate an error response for the message. */ + msg->rsp[0] = msg->data[0] | (1 << 2); + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = IPMI_ERR_UNSPECIFIED; + msg->rsp_size = 3; + } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1))/* Netfn */ + || (msg->rsp[1] != msg->data[1])) /* Command */ + { + /* The response is not even marginally correct. */ + printk(KERN_WARNING PFX "BMC returned incorrect response," + " expected netfn %x cmd %x, got netfn %x cmd %x\n", + (msg->data[0] >> 2) | 1, msg->data[1], + msg->rsp[0] >> 2, msg->rsp[1]); + + /* Generate an error response for the message. */ + msg->rsp[0] = msg->data[0] | (1 << 2); + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = IPMI_ERR_UNSPECIFIED; + msg->rsp_size = 3; + } + + if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) + && (msg->rsp[1] == IPMI_SEND_MSG_CMD) + && (msg->user_data != NULL)) + { + /* It's a response to a response we sent. For this we + deliver a send message response to the user. */ + struct ipmi_recv_msg *recv_msg = msg->user_data; + + requeue = 0; + if (msg->rsp_size < 2) + /* Message is too small to be correct. */ + goto out; + + chan = msg->data[2] & 0x0f; + if (chan >= IPMI_MAX_CHANNELS) + /* Invalid channel number */ + goto out; + + if (recv_msg) { + recv_msg->recv_type = IPMI_RESPONSE_RESPONSE_TYPE; + recv_msg->msg.data = recv_msg->msg_data; + recv_msg->msg.data_len = 1; + recv_msg->msg_data[0] = msg->rsp[2]; + deliver_response(recv_msg); + } + } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) + && (msg->rsp[1] == IPMI_GET_MSG_CMD)) + { + /* It's from the receive queue. */ + chan = msg->rsp[3] & 0xf; + if (chan >= IPMI_MAX_CHANNELS) { + /* Invalid channel number */ + requeue = 0; + goto out; + } + + switch (intf->channels[chan].medium) { + case IPMI_CHANNEL_MEDIUM_IPMB: + if (msg->rsp[4] & 0x04) { + /* It's a response, so find the + requesting message and send it up. */ + requeue = handle_ipmb_get_msg_rsp(intf, msg); + } else { + /* It's a command to the SMS from some other + entity. Handle that. */ + requeue = handle_ipmb_get_msg_cmd(intf, msg); + } + break; + + case IPMI_CHANNEL_MEDIUM_8023LAN: + case IPMI_CHANNEL_MEDIUM_ASYNC: + if (msg->rsp[6] & 0x04) { + /* It's a response, so find the + requesting message and send it up. */ + requeue = handle_lan_get_msg_rsp(intf, msg); + } else { + /* It's a command to the SMS from some other + entity. Handle that. */ + requeue = handle_lan_get_msg_cmd(intf, msg); + } + break; + + default: + /* We don't handle the channel type, so just + * free the message. */ + requeue = 0; + } + + } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) + && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) + { + /* It's an asyncronous event. */ + requeue = handle_read_event_rsp(intf, msg); + } else { + /* It's a response from the local BMC. */ + requeue = handle_bmc_rsp(intf, msg); + } + + out: + return requeue; +} + +/* Handle a new message from the lower layer. */ +void ipmi_smi_msg_received(ipmi_smi_t intf, + struct ipmi_smi_msg *msg) +{ + unsigned long flags; + int rv; + + + /* Lock the user lock so the user can't go away while we are + working on it. */ + read_lock(&(intf->users_lock)); + + if ((msg->data_size >= 2) + && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2)) + && (msg->data[1] == IPMI_SEND_MSG_CMD) + && (msg->user_data == NULL)) { + /* This is the local response to a command send, start + the timer for these. The user_data will not be + NULL if this is a response send, and we will let + response sends just go through. */ + + /* Check for errors, if we get certain errors (ones + that mean basically we can try again later), we + ignore them and start the timer. Otherwise we + report the error immediately. */ + if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) + && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) + && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)) + { + int chan = msg->rsp[3] & 0xf; + + /* Got an error sending the message, handle it. */ + spin_lock_irqsave(&intf->counter_lock, flags); + if (chan >= IPMI_MAX_CHANNELS) + ; /* This shouldn't happen */ + else if ((intf->channels[chan].medium + == IPMI_CHANNEL_MEDIUM_8023LAN) + || (intf->channels[chan].medium + == IPMI_CHANNEL_MEDIUM_ASYNC)) + intf->sent_lan_command_errs++; + else + intf->sent_ipmb_command_errs++; + spin_unlock_irqrestore(&intf->counter_lock, flags); + intf_err_seq(intf, msg->msgid, msg->rsp[2]); + } else { + /* The message was sent, start the timer. */ + intf_start_seq_timer(intf, msg->msgid); + } + + ipmi_free_smi_msg(msg); + goto out_unlock; + } + + /* To preserve message order, if the list is not empty, we + tack this message onto the end of the list. */ + spin_lock_irqsave(&(intf->waiting_msgs_lock), flags); + if (!list_empty(&(intf->waiting_msgs))) { + list_add_tail(&(msg->link), &(intf->waiting_msgs)); + spin_unlock(&(intf->waiting_msgs_lock)); + goto out_unlock; + } + spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags); + + rv = handle_new_recv_msg(intf, msg); + if (rv > 0) { + /* Could not handle the message now, just add it to a + list to handle later. */ + spin_lock(&(intf->waiting_msgs_lock)); + list_add_tail(&(msg->link), &(intf->waiting_msgs)); + spin_unlock(&(intf->waiting_msgs_lock)); + } else if (rv == 0) { + ipmi_free_smi_msg(msg); + } + + out_unlock: + read_unlock(&(intf->users_lock)); +} + +void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf) +{ + ipmi_user_t user; + + read_lock(&(intf->users_lock)); + list_for_each_entry(user, &(intf->users), link) { + if (! user->handler->ipmi_watchdog_pretimeout) + continue; + + user->handler->ipmi_watchdog_pretimeout(user->handler_data); + } + read_unlock(&(intf->users_lock)); +} + +static void +handle_msg_timeout(struct ipmi_recv_msg *msg) +{ + msg->recv_type = IPMI_RESPONSE_RECV_TYPE; + msg->msg_data[0] = IPMI_TIMEOUT_COMPLETION_CODE; + msg->msg.netfn |= 1; /* Convert to a response. */ + msg->msg.data_len = 1; + msg->msg.data = msg->msg_data; + deliver_response(msg); +} + +static void +send_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, + struct ipmi_smi_msg *smi_msg, + unsigned char seq, long seqid) +{ + if (!smi_msg) + smi_msg = ipmi_alloc_smi_msg(); + if (!smi_msg) + /* If we can't allocate the message, then just return, we + get 4 retries, so this should be ok. */ + return; + + memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len); + smi_msg->data_size = recv_msg->msg.data_len; + smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid); + + /* Send the new message. We send with a zero priority. It + timed out, I doubt time is that critical now, and high + priority messages are really only for messages to the local + MC, which don't get resent. */ + intf->handlers->sender(intf->send_info, smi_msg, 0); + +#ifdef DEBUG_MSGING + { + int m; + printk("Resend: "); + for (m=0; mdata_size; m++) + printk(" %2.2x", smi_msg->data[m]); + printk("\n"); + } +#endif +} + +static void +ipmi_timeout_handler(long timeout_period) +{ + ipmi_smi_t intf; + struct list_head timeouts; + struct ipmi_recv_msg *msg, *msg2; + struct ipmi_smi_msg *smi_msg, *smi_msg2; + unsigned long flags; + int i, j; + + INIT_LIST_HEAD(&timeouts); + + spin_lock(&interfaces_lock); + for (i=0; iusers_lock)); + + /* See if any waiting messages need to be processed. */ + spin_lock_irqsave(&(intf->waiting_msgs_lock), flags); + list_for_each_entry_safe(smi_msg, smi_msg2, &(intf->waiting_msgs), link) { + if (! handle_new_recv_msg(intf, smi_msg)) { + list_del(&smi_msg->link); + ipmi_free_smi_msg(smi_msg); + } else { + /* To preserve message order, quit if we + can't handle a message. */ + break; + } + } + spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags); + + /* Go through the seq table and find any messages that + have timed out, putting them in the timeouts + list. */ + spin_lock_irqsave(&(intf->seq_lock), flags); + for (j=0; jseq_table[j]); + if (!ent->inuse) + continue; + + ent->timeout -= timeout_period; + if (ent->timeout > 0) + continue; + + if (ent->retries_left == 0) { + /* The message has used all its retries. */ + ent->inuse = 0; + msg = ent->recv_msg; + list_add_tail(&(msg->link), &timeouts); + spin_lock(&intf->counter_lock); + if (ent->broadcast) + intf->timed_out_ipmb_broadcasts++; + else if (ent->recv_msg->addr.addr_type + == IPMI_LAN_ADDR_TYPE) + intf->timed_out_lan_commands++; + else + intf->timed_out_ipmb_commands++; + spin_unlock(&intf->counter_lock); + } else { + /* More retries, send again. */ + + /* Start with the max timer, set to normal + timer after the message is sent. */ + ent->timeout = MAX_MSG_TIMEOUT; + ent->retries_left--; + send_from_recv_msg(intf, ent->recv_msg, NULL, + j, ent->seqid); + spin_lock(&intf->counter_lock); + if (ent->recv_msg->addr.addr_type + == IPMI_LAN_ADDR_TYPE) + intf->retransmitted_lan_commands++; + else + intf->retransmitted_ipmb_commands++; + spin_unlock(&intf->counter_lock); + } + } + spin_unlock_irqrestore(&(intf->seq_lock), flags); + + list_for_each_entry_safe(msg, msg2, &timeouts, link) { + handle_msg_timeout(msg); + } + + read_unlock(&(intf->users_lock)); + } + spin_unlock(&interfaces_lock); +} + +static void ipmi_request_event(void) +{ + ipmi_smi_t intf; + int i; + + spin_lock(&interfaces_lock); + for (i=0; ihandlers->request_events(intf->send_info); + } + spin_unlock(&interfaces_lock); +} + +static struct timer_list ipmi_timer; + +/* Call every ~100 ms. */ +#define IPMI_TIMEOUT_TIME 100 + +/* How many jiffies does it take to get to the timeout time. */ +#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000) + +/* Request events from the queue every second (this is the number of + IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the + future, IPMI will add a way to know immediately if an event is in + the queue and this silliness can go away. */ +#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME)) + +static volatile int stop_operation = 0; +static volatile int timer_stopped = 0; +static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME; + +static void ipmi_timeout(unsigned long data) +{ + if (stop_operation) { + timer_stopped = 1; + return; + } + + ticks_to_req_ev--; + if (ticks_to_req_ev == 0) { + ipmi_request_event(); + ticks_to_req_ev = IPMI_REQUEST_EV_TIME; + } + + ipmi_timeout_handler(IPMI_TIMEOUT_TIME); + + ipmi_timer.expires += IPMI_TIMEOUT_JIFFIES; + add_timer(&ipmi_timer); +} + + +static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0); +static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0); + +/* FIXME - convert these to slabs. */ +static void free_smi_msg(struct ipmi_smi_msg *msg) +{ + atomic_dec(&smi_msg_inuse_count); + kfree(msg); +} + +struct ipmi_smi_msg *ipmi_alloc_smi_msg(void) +{ + struct ipmi_smi_msg *rv; + rv = kmalloc(sizeof(struct ipmi_smi_msg), GFP_ATOMIC); + if (rv) { + rv->done = free_smi_msg; + rv->user_data = NULL; + atomic_inc(&smi_msg_inuse_count); + } + return rv; +} + +static void free_recv_msg(struct ipmi_recv_msg *msg) +{ + atomic_dec(&recv_msg_inuse_count); + kfree(msg); +} + +struct ipmi_recv_msg *ipmi_alloc_recv_msg(void) +{ + struct ipmi_recv_msg *rv; + + rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC); + if (rv) { + rv->done = free_recv_msg; + atomic_inc(&recv_msg_inuse_count); + } + return rv; +} + +#ifdef CONFIG_IPMI_PANIC_EVENT + +static void dummy_smi_done_handler(struct ipmi_smi_msg *msg) +{ +} + +static void dummy_recv_done_handler(struct ipmi_recv_msg *msg) +{ +} + +#ifdef CONFIG_IPMI_PANIC_STRING +static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_smi_msg *msg) +{ + if ((msg->rsp[0] == (IPMI_NETFN_SENSOR_EVENT_RESPONSE << 2)) + && (msg->rsp[1] == IPMI_GET_EVENT_RECEIVER_CMD) + && (msg->rsp[2] == IPMI_CC_NO_ERROR)) + { + /* A get event receiver command, save it. */ + intf->event_receiver = msg->rsp[3]; + intf->event_receiver_lun = msg->rsp[4] & 0x3; + } +} + +static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_smi_msg *msg) +{ + if ((msg->rsp[0] == (IPMI_NETFN_APP_RESPONSE << 2)) + && (msg->rsp[1] == IPMI_GET_DEVICE_ID_CMD) + && (msg->rsp[2] == IPMI_CC_NO_ERROR)) + { + /* A get device id command, save if we are an event + receiver or generator. */ + intf->local_sel_device = (msg->rsp[8] >> 2) & 1; + intf->local_event_generator = (msg->rsp[8] >> 5) & 1; + } +} +#endif + +static void send_panic_events(char *str) +{ + struct kernel_ipmi_msg msg; + ipmi_smi_t intf; + unsigned char data[16]; + int i; + struct ipmi_system_interface_addr *si; + struct ipmi_addr addr; + struct ipmi_smi_msg smi_msg; + struct ipmi_recv_msg recv_msg; + + si = (struct ipmi_system_interface_addr *) &addr; + si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + si->channel = IPMI_BMC_CHANNEL; + si->lun = 0; + + /* Fill in an event telling that we have failed. */ + msg.netfn = 0x04; /* Sensor or Event. */ + msg.cmd = 2; /* Platform event command. */ + msg.data = data; + msg.data_len = 8; + data[0] = 0x21; /* Kernel generator ID, IPMI table 5-4 */ + data[1] = 0x03; /* This is for IPMI 1.0. */ + data[2] = 0x20; /* OS Critical Stop, IPMI table 36-3 */ + data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */ + data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */ + + /* Put a few breadcrumbs in. Hopefully later we can add more things + to make the panic events more useful. */ + if (str) { + data[3] = str[0]; + data[6] = str[1]; + data[7] = str[2]; + } + + smi_msg.done = dummy_smi_done_handler; + recv_msg.done = dummy_recv_done_handler; + + /* For every registered interface, send the event. */ + for (i=0; ihandlers->set_run_to_completion(intf->send_info, 1); + i_ipmi_request(NULL, + intf, + &addr, + 0, + &msg, + NULL, + &smi_msg, + &recv_msg, + 0, + intf->my_address, + intf->my_lun, + 0, 1); /* Don't retry, and don't wait. */ + } + +#ifdef CONFIG_IPMI_PANIC_STRING + /* On every interface, dump a bunch of OEM event holding the + string. */ + if (!str) + return; + + for (i=0; ilocal_sel_device = 0; + intf->local_event_generator = 0; + intf->event_receiver = 0; + + /* Request the device info from the local MC. */ + msg.netfn = IPMI_NETFN_APP_REQUEST; + msg.cmd = IPMI_GET_DEVICE_ID_CMD; + msg.data = NULL; + msg.data_len = 0; + intf->null_user_handler = device_id_fetcher; + i_ipmi_request(NULL, + intf, + &addr, + 0, + &msg, + NULL, + &smi_msg, + &recv_msg, + 0, + intf->my_address, + intf->my_lun, + 0, 1); /* Don't retry, and don't wait. */ + + if (intf->local_event_generator) { + /* Request the event receiver from the local MC. */ + msg.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST; + msg.cmd = IPMI_GET_EVENT_RECEIVER_CMD; + msg.data = NULL; + msg.data_len = 0; + intf->null_user_handler = event_receiver_fetcher; + i_ipmi_request(NULL, + intf, + &addr, + 0, + &msg, + NULL, + &smi_msg, + &recv_msg, + 0, + intf->my_address, + intf->my_lun, + 0, 1); /* no retry, and no wait. */ + } + intf->null_user_handler = NULL; + + /* Validate the event receiver. The low bit must not + be 1 (it must be a valid IPMB address), it cannot + be zero, and it must not be my address. */ + if (((intf->event_receiver & 1) == 0) + && (intf->event_receiver != 0) + && (intf->event_receiver != intf->my_address)) + { + /* The event receiver is valid, send an IPMB + message. */ + ipmb = (struct ipmi_ipmb_addr *) &addr; + ipmb->addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb->channel = 0; /* FIXME - is this right? */ + ipmb->lun = intf->event_receiver_lun; + ipmb->slave_addr = intf->event_receiver; + } else if (intf->local_sel_device) { + /* The event receiver was not valid (or was + me), but I am an SEL device, just dump it + in my SEL. */ + si = (struct ipmi_system_interface_addr *) &addr; + si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + si->channel = IPMI_BMC_CHANNEL; + si->lun = 0; + } else + continue; /* No where to send the event. */ + + + msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */ + msg.cmd = IPMI_ADD_SEL_ENTRY_CMD; + msg.data = data; + msg.data_len = 16; + + j = 0; + while (*p) { + int size = strlen(p); + + if (size > 11) + size = 11; + data[0] = 0; + data[1] = 0; + data[2] = 0xf0; /* OEM event without timestamp. */ + data[3] = intf->my_address; + data[4] = j++; /* sequence # */ + /* Always give 11 bytes, so strncpy will fill + it with zeroes for me. */ + strncpy(data+5, p, 11); + p += size; + + i_ipmi_request(NULL, + intf, + &addr, + 0, + &msg, + NULL, + &smi_msg, + &recv_msg, + 0, + intf->my_address, + intf->my_lun, + 0, 1); /* no retry, and no wait. */ + } + } +#endif /* CONFIG_IPMI_PANIC_STRING */ +} +#endif /* CONFIG_IPMI_PANIC_EVENT */ + +static int has_paniced = 0; + +static int panic_event(struct notifier_block *this, + unsigned long event, + void *ptr) +{ + int i; + ipmi_smi_t intf; + + if (has_paniced) + return NOTIFY_DONE; + has_paniced = 1; + + /* For every registered interface, set it to run to completion. */ + for (i=0; ihandlers->set_run_to_completion(intf->send_info, 1); + } + +#ifdef CONFIG_IPMI_PANIC_EVENT + send_panic_events(ptr); +#endif + + return NOTIFY_DONE; +} + +static struct notifier_block panic_block = { + .notifier_call = panic_event, + .next = NULL, + .priority = 200 /* priority: INT_MAX >= x >= 0 */ +}; + +static int ipmi_init_msghandler(void) +{ + int i; + + if (initialized) + return 0; + + printk(KERN_INFO "ipmi message handler version " + IPMI_MSGHANDLER_VERSION "\n"); + + for (i=0; iowner = THIS_MODULE; + + init_timer(&ipmi_timer); + ipmi_timer.data = 0; + ipmi_timer.function = ipmi_timeout; + ipmi_timer.expires = jiffies + IPMI_TIMEOUT_JIFFIES; + add_timer(&ipmi_timer); + + notifier_chain_register(&panic_notifier_list, &panic_block); + + initialized = 1; + + return 0; +} + +static __init int ipmi_init_msghandler_mod(void) +{ + ipmi_init_msghandler(); + return 0; +} + +static __exit void cleanup_ipmi(void) +{ + int count; + + if (!initialized) + return; + + notifier_chain_unregister(&panic_notifier_list, &panic_block); + + /* This can't be called if any interfaces exist, so no worry about + shutting down the interfaces. */ + + /* Tell the timer to stop, then wait for it to stop. This avoids + problems with race conditions removing the timer here. */ + stop_operation = 1; + while (!timer_stopped) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + } + + remove_proc_entry(proc_ipmi_root->name, &proc_root); + + initialized = 0; + + /* Check for buffer leaks. */ + count = atomic_read(&smi_msg_inuse_count); + if (count != 0) + printk(KERN_WARNING PFX "SMI message count %d at exit\n", + count); + count = atomic_read(&recv_msg_inuse_count); + if (count != 0) + printk(KERN_WARNING PFX "recv message count %d at exit\n", + count); +} +module_exit(cleanup_ipmi); + +module_init(ipmi_init_msghandler_mod); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(ipmi_create_user); +EXPORT_SYMBOL(ipmi_destroy_user); +EXPORT_SYMBOL(ipmi_get_version); +EXPORT_SYMBOL(ipmi_request_settime); +EXPORT_SYMBOL(ipmi_request_supply_msgs); +EXPORT_SYMBOL(ipmi_register_smi); +EXPORT_SYMBOL(ipmi_unregister_smi); +EXPORT_SYMBOL(ipmi_register_for_cmd); +EXPORT_SYMBOL(ipmi_unregister_for_cmd); +EXPORT_SYMBOL(ipmi_smi_msg_received); +EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout); +EXPORT_SYMBOL(ipmi_alloc_smi_msg); +EXPORT_SYMBOL(ipmi_addr_length); +EXPORT_SYMBOL(ipmi_validate_addr); +EXPORT_SYMBOL(ipmi_set_gets_events); +EXPORT_SYMBOL(ipmi_smi_watcher_register); +EXPORT_SYMBOL(ipmi_smi_watcher_unregister); +EXPORT_SYMBOL(ipmi_set_my_address); +EXPORT_SYMBOL(ipmi_get_my_address); +EXPORT_SYMBOL(ipmi_set_my_LUN); +EXPORT_SYMBOL(ipmi_get_my_LUN); +EXPORT_SYMBOL(ipmi_smi_add_proc_entry); +EXPORT_SYMBOL(ipmi_user_set_run_to_completion); diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c new file mode 100644 index 000000000000..cb5cdc6f14bf --- /dev/null +++ b/drivers/char/ipmi/ipmi_poweroff.c @@ -0,0 +1,549 @@ +/* + * ipmi_poweroff.c + * + * MontaVista IPMI Poweroff extension to sys_reboot + * + * Author: MontaVista Software, Inc. + * Steven Dake + * Corey Minyard + * source@mvista.com + * + * Copyright 2002,2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include + +#define PFX "IPMI poweroff: " +#define IPMI_POWEROFF_VERSION "v33" + +/* Where to we insert our poweroff function? */ +extern void (*pm_power_off)(void); + +/* Stuff from the get device id command. */ +static unsigned int mfg_id; +static unsigned int prod_id; +static unsigned char capabilities; + +/* We use our own messages for this operation, we don't let the system + allocate them, since we may be in a panic situation. The whole + thing is single-threaded, anyway, so multiple messages are not + required. */ +static void dummy_smi_free(struct ipmi_smi_msg *msg) +{ +} +static void dummy_recv_free(struct ipmi_recv_msg *msg) +{ +} +static struct ipmi_smi_msg halt_smi_msg = +{ + .done = dummy_smi_free +}; +static struct ipmi_recv_msg halt_recv_msg = +{ + .done = dummy_recv_free +}; + + +/* + * Code to send a message and wait for the reponse. + */ + +static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) +{ + struct semaphore *sem = recv_msg->user_msg_data; + + if (sem) + up(sem); +} + +static struct ipmi_user_hndl ipmi_poweroff_handler = +{ + .ipmi_recv_hndl = receive_handler +}; + + +static int ipmi_request_wait_for_response(ipmi_user_t user, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *send_msg) +{ + int rv; + struct semaphore sem; + + sema_init (&sem, 0); + + rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &sem, + &halt_smi_msg, &halt_recv_msg, 0); + if (rv) + return rv; + + down (&sem); + + return halt_recv_msg.msg.data[0]; +} + +/* We are in run-to-completion mode, no semaphore is desired. */ +static int ipmi_request_in_rc_mode(ipmi_user_t user, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *send_msg) +{ + int rv; + + rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL, + &halt_smi_msg, &halt_recv_msg, 0); + if (rv) + return rv; + + return halt_recv_msg.msg.data[0]; +} + +/* + * ATCA Support + */ + +#define IPMI_NETFN_ATCA 0x2c +#define IPMI_ATCA_SET_POWER_CMD 0x11 +#define IPMI_ATCA_GET_ADDR_INFO_CMD 0x01 +#define IPMI_PICMG_ID 0 + +static int ipmi_atca_detect (ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + /* + * Use get address info to check and see if we are ATCA + */ + send_msg.netfn = IPMI_NETFN_ATCA; + send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD; + data[0] = IPMI_PICMG_ID; + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_wait_for_response(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + return !rv; +} + +static void ipmi_poweroff_atca (ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[4]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via ATCA power command\n"); + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_ATCA; + send_msg.cmd = IPMI_ATCA_SET_POWER_CMD; + data[0] = IPMI_PICMG_ID; + data[1] = 0; /* FRU id */ + data[2] = 0; /* Power Level */ + data[3] = 0; /* Don't change saved presets */ + send_msg.data = data; + send_msg.data_len = sizeof (data); + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + printk(KERN_ERR PFX "Unable to send ATCA powerdown message," + " IPMI error 0x%x\n", rv); + goto out; + } + + out: + return; +} + +/* + * CPI1 Support + */ + +#define IPMI_NETFN_OEM_1 0xf8 +#define OEM_GRP_CMD_SET_RESET_STATE 0x84 +#define OEM_GRP_CMD_SET_POWER_STATE 0x82 +#define IPMI_NETFN_OEM_8 0xf8 +#define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL 0x80 +#define OEM_GRP_CMD_GET_SLOT_GA 0xa3 +#define IPMI_NETFN_SENSOR_EVT 0x10 +#define IPMI_CMD_GET_EVENT_RECEIVER 0x01 + +#define IPMI_CPI1_PRODUCT_ID 0x000157 +#define IPMI_CPI1_MANUFACTURER_ID 0x0108 + +static int ipmi_cpi1_detect (ipmi_user_t user) +{ + return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID) + && (prod_id == IPMI_CPI1_PRODUCT_ID)); +} + +static void ipmi_poweroff_cpi1 (ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct ipmi_ipmb_addr ipmb_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + int slot; + unsigned char hotswap_ipmb; + unsigned char aer_addr; + unsigned char aer_lun; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via CPI1 power command\n"); + + /* + * Get IPMI ipmb address + */ + send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; + send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + slot = halt_recv_msg.msg.data[1]; + hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot); + + /* + * Get active event receiver + */ + send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2; + send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + aer_addr = halt_recv_msg.msg.data[1]; + aer_lun = halt_recv_msg.msg.data[2]; + + /* + * Setup IPMB address target instead of local target + */ + ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb_addr.channel = 0; + ipmb_addr.slave_addr = aer_addr; + ipmb_addr.lun = aer_lun; + + /* + * Send request hotswap control to remove blade from dpv + */ + send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; + send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL; + send_msg.data = &hotswap_ipmb; + send_msg.data_len = 1; + ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &ipmb_addr, + &send_msg); + + /* + * Set reset asserted + */ + send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; + send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE; + send_msg.data = data; + data[0] = 1; /* Reset asserted state */ + send_msg.data_len = 1; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; + send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE; + send_msg.data = data; + data[0] = 1; /* Power down state */ + send_msg.data_len = 1; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + + out: + return; +} + +/* + * Standard chassis support + */ + +#define IPMI_NETFN_CHASSIS_REQUEST 0 +#define IPMI_CHASSIS_CONTROL_CMD 0x02 + +static int ipmi_chassis_detect (ipmi_user_t user) +{ + /* Chassis support, use it. */ + return (capabilities & 0x80); +} + +static void ipmi_poweroff_chassis (ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via IPMI chassis control command\n"); + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST; + send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD; + data[0] = 0; /* Power down */ + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + printk(KERN_ERR PFX "Unable to send chassis powerdown message," + " IPMI error 0x%x\n", rv); + goto out; + } + + out: + return; +} + + +/* Table of possible power off functions. */ +struct poweroff_function { + char *platform_type; + int (*detect)(ipmi_user_t user); + void (*poweroff_func)(ipmi_user_t user); +}; + +static struct poweroff_function poweroff_functions[] = { + { .platform_type = "ATCA", + .detect = ipmi_atca_detect, + .poweroff_func = ipmi_poweroff_atca }, + { .platform_type = "CPI1", + .detect = ipmi_cpi1_detect, + .poweroff_func = ipmi_poweroff_cpi1 }, + /* Chassis should generally be last, other things should override + it. */ + { .platform_type = "chassis", + .detect = ipmi_chassis_detect, + .poweroff_func = ipmi_poweroff_chassis }, +}; +#define NUM_PO_FUNCS (sizeof(poweroff_functions) \ + / sizeof(struct poweroff_function)) + + +/* Our local state. */ +static int ready = 0; +static ipmi_user_t ipmi_user; +static void (*specific_poweroff_func)(ipmi_user_t user) = NULL; + +/* Holds the old poweroff function so we can restore it on removal. */ +static void (*old_poweroff_func)(void); + + +/* Called on a powerdown request. */ +static void ipmi_poweroff_function (void) +{ + if (!ready) + return; + + /* Use run-to-completion mode, since interrupts may be off. */ + ipmi_user_set_run_to_completion(ipmi_user, 1); + specific_poweroff_func(ipmi_user); + ipmi_user_set_run_to_completion(ipmi_user, 0); +} + +/* Wait for an IPMI interface to be installed, the first one installed + will be grabbed by this code and used to perform the powerdown. */ +static void ipmi_po_new_smi(int if_num) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + int i; + + if (ready) + return; + + rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL, &ipmi_user); + if (rv) { + printk(KERN_ERR PFX "could not create IPMI user, error %d\n", + rv); + return; + } + + /* + * Do a get device ide and store some results, since this is + * used by several functions. + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + send_msg.netfn = IPMI_NETFN_APP_REQUEST; + send_msg.cmd = IPMI_GET_DEVICE_ID_CMD; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_wait_for_response(ipmi_user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + printk(KERN_ERR PFX "Unable to send IPMI get device id info," + " IPMI error 0x%x\n", rv); + goto out_err; + } + + if (halt_recv_msg.msg.data_len < 12) { + printk(KERN_ERR PFX "(chassis) IPMI get device id info too," + " short, was %d bytes, needed %d bytes\n", + halt_recv_msg.msg.data_len, 12); + goto out_err; + } + + mfg_id = (halt_recv_msg.msg.data[7] + | (halt_recv_msg.msg.data[8] << 8) + | (halt_recv_msg.msg.data[9] << 16)); + prod_id = (halt_recv_msg.msg.data[10] + | (halt_recv_msg.msg.data[11] << 8)); + capabilities = halt_recv_msg.msg.data[6]; + + + /* Scan for a poweroff method */ + for (i=0; i + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This file holds the "policy" for the interface to the SMI state + * machine. It does the configuration, handles timers and interrupts, + * and drives the real SMI state machine. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_HIGH_RES_TIMERS +#include +# if defined(schedule_next_int) +/* Old high-res timer code, do translations. */ +# define get_arch_cycles(a) quick_update_jiffies_sub(a) +# define arch_cycles_per_jiffy cycles_per_jiffies +# endif +static inline void add_usec_to_timer(struct timer_list *t, long v) +{ + t->sub_expires += nsec_to_arch_cycle(v * 1000); + while (t->sub_expires >= arch_cycles_per_jiffy) + { + t->expires++; + t->sub_expires -= arch_cycles_per_jiffy; + } +} +#endif +#include +#include +#include +#include +#include "ipmi_si_sm.h" +#include + +#define IPMI_SI_VERSION "v33" + +/* Measure times between events in the driver. */ +#undef DEBUG_TIMING + +/* Call every 10 ms. */ +#define SI_TIMEOUT_TIME_USEC 10000 +#define SI_USEC_PER_JIFFY (1000000/HZ) +#define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY) +#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a + short timeout */ + +enum si_intf_state { + SI_NORMAL, + SI_GETTING_FLAGS, + SI_GETTING_EVENTS, + SI_CLEARING_FLAGS, + SI_CLEARING_FLAGS_THEN_SET_IRQ, + SI_GETTING_MESSAGES, + SI_ENABLE_INTERRUPTS1, + SI_ENABLE_INTERRUPTS2 + /* FIXME - add watchdog stuff. */ +}; + +enum si_type { + SI_KCS, SI_SMIC, SI_BT +}; + +struct smi_info +{ + ipmi_smi_t intf; + struct si_sm_data *si_sm; + struct si_sm_handlers *handlers; + enum si_type si_type; + spinlock_t si_lock; + spinlock_t msg_lock; + struct list_head xmit_msgs; + struct list_head hp_xmit_msgs; + struct ipmi_smi_msg *curr_msg; + enum si_intf_state si_state; + + /* Used to handle the various types of I/O that can occur with + IPMI */ + struct si_sm_io io; + int (*io_setup)(struct smi_info *info); + void (*io_cleanup)(struct smi_info *info); + int (*irq_setup)(struct smi_info *info); + void (*irq_cleanup)(struct smi_info *info); + unsigned int io_size; + + /* Flags from the last GET_MSG_FLAGS command, used when an ATTN + is set to hold the flags until we are done handling everything + from the flags. */ +#define RECEIVE_MSG_AVAIL 0x01 +#define EVENT_MSG_BUFFER_FULL 0x02 +#define WDT_PRE_TIMEOUT_INT 0x08 + unsigned char msg_flags; + + /* If set to true, this will request events the next time the + state machine is idle. */ + atomic_t req_events; + + /* If true, run the state machine to completion on every send + call. Generally used after a panic to make sure stuff goes + out. */ + int run_to_completion; + + /* The I/O port of an SI interface. */ + int port; + + /* The space between start addresses of the two ports. For + instance, if the first port is 0xca2 and the spacing is 4, then + the second port is 0xca6. */ + unsigned int spacing; + + /* zero if no irq; */ + int irq; + + /* The timer for this si. */ + struct timer_list si_timer; + + /* The time (in jiffies) the last timeout occurred at. */ + unsigned long last_timeout_jiffies; + + /* Used to gracefully stop the timer without race conditions. */ + volatile int stop_operation; + volatile int timer_stopped; + + /* The driver will disable interrupts when it gets into a + situation where it cannot handle messages due to lack of + memory. Once that situation clears up, it will re-enable + interrupts. */ + int interrupt_disabled; + + unsigned char ipmi_si_dev_rev; + unsigned char ipmi_si_fw_rev_major; + unsigned char ipmi_si_fw_rev_minor; + unsigned char ipmi_version_major; + unsigned char ipmi_version_minor; + + /* Slave address, could be reported from DMI. */ + unsigned char slave_addr; + + /* Counters and things for the proc filesystem. */ + spinlock_t count_lock; + unsigned long short_timeouts; + unsigned long long_timeouts; + unsigned long timeout_restarts; + unsigned long idles; + unsigned long interrupts; + unsigned long attentions; + unsigned long flag_fetches; + unsigned long hosed_count; + unsigned long complete_transactions; + unsigned long events; + unsigned long watchdog_pretimeouts; + unsigned long incoming_messages; +}; + +static void si_restart_short_timer(struct smi_info *smi_info); + +static void deliver_recv_msg(struct smi_info *smi_info, + struct ipmi_smi_msg *msg) +{ + /* Deliver the message to the upper layer with the lock + released. */ + spin_unlock(&(smi_info->si_lock)); + ipmi_smi_msg_received(smi_info->intf, msg); + spin_lock(&(smi_info->si_lock)); +} + +static void return_hosed_msg(struct smi_info *smi_info) +{ + struct ipmi_smi_msg *msg = smi_info->curr_msg; + + /* Make it a reponse */ + msg->rsp[0] = msg->data[0] | 4; + msg->rsp[1] = msg->data[1]; + msg->rsp[2] = 0xFF; /* Unknown error. */ + msg->rsp_size = 3; + + smi_info->curr_msg = NULL; + deliver_recv_msg(smi_info, msg); +} + +static enum si_sm_result start_next_msg(struct smi_info *smi_info) +{ + int rv; + struct list_head *entry = NULL; +#ifdef DEBUG_TIMING + struct timeval t; +#endif + + /* No need to save flags, we aleady have interrupts off and we + already hold the SMI lock. */ + spin_lock(&(smi_info->msg_lock)); + + /* Pick the high priority queue first. */ + if (! list_empty(&(smi_info->hp_xmit_msgs))) { + entry = smi_info->hp_xmit_msgs.next; + } else if (! list_empty(&(smi_info->xmit_msgs))) { + entry = smi_info->xmit_msgs.next; + } + + if (!entry) { + smi_info->curr_msg = NULL; + rv = SI_SM_IDLE; + } else { + int err; + + list_del(entry); + smi_info->curr_msg = list_entry(entry, + struct ipmi_smi_msg, + link); +#ifdef DEBUG_TIMING + do_gettimeofday(&t); + printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); +#endif + err = smi_info->handlers->start_transaction( + smi_info->si_sm, + smi_info->curr_msg->data, + smi_info->curr_msg->data_size); + if (err) { + return_hosed_msg(smi_info); + } + + rv = SI_SM_CALL_WITHOUT_DELAY; + } + spin_unlock(&(smi_info->msg_lock)); + + return rv; +} + +static void start_enable_irq(struct smi_info *smi_info) +{ + unsigned char msg[2]; + + /* If we are enabling interrupts, we have to tell the + BMC to use them. */ + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; + + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + smi_info->si_state = SI_ENABLE_INTERRUPTS1; +} + +static void start_clear_flags(struct smi_info *smi_info) +{ + unsigned char msg[3]; + + /* Make sure the watchdog pre-timeout flag is not set at startup. */ + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; + msg[2] = WDT_PRE_TIMEOUT_INT; + + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3); + smi_info->si_state = SI_CLEARING_FLAGS; +} + +/* When we have a situtaion where we run out of memory and cannot + allocate messages, we just leave them in the BMC and run the system + polled until we can allocate some memory. Once we have some + memory, we will re-enable the interrupt. */ +static inline void disable_si_irq(struct smi_info *smi_info) +{ + if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { + disable_irq_nosync(smi_info->irq); + smi_info->interrupt_disabled = 1; + } +} + +static inline void enable_si_irq(struct smi_info *smi_info) +{ + if ((smi_info->irq) && (smi_info->interrupt_disabled)) { + enable_irq(smi_info->irq); + smi_info->interrupt_disabled = 0; + } +} + +static void handle_flags(struct smi_info *smi_info) +{ + if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) { + /* Watchdog pre-timeout */ + spin_lock(&smi_info->count_lock); + smi_info->watchdog_pretimeouts++; + spin_unlock(&smi_info->count_lock); + + start_clear_flags(smi_info); + smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; + spin_unlock(&(smi_info->si_lock)); + ipmi_smi_watchdog_pretimeout(smi_info->intf); + spin_lock(&(smi_info->si_lock)); + } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) { + /* Messages available. */ + smi_info->curr_msg = ipmi_alloc_smi_msg(); + if (!smi_info->curr_msg) { + disable_si_irq(smi_info); + smi_info->si_state = SI_NORMAL; + return; + } + enable_si_irq(smi_info); + + smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD; + smi_info->curr_msg->data_size = 2; + + smi_info->handlers->start_transaction( + smi_info->si_sm, + smi_info->curr_msg->data, + smi_info->curr_msg->data_size); + smi_info->si_state = SI_GETTING_MESSAGES; + } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) { + /* Events available. */ + smi_info->curr_msg = ipmi_alloc_smi_msg(); + if (!smi_info->curr_msg) { + disable_si_irq(smi_info); + smi_info->si_state = SI_NORMAL; + return; + } + enable_si_irq(smi_info); + + smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); + smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD; + smi_info->curr_msg->data_size = 2; + + smi_info->handlers->start_transaction( + smi_info->si_sm, + smi_info->curr_msg->data, + smi_info->curr_msg->data_size); + smi_info->si_state = SI_GETTING_EVENTS; + } else { + smi_info->si_state = SI_NORMAL; + } +} + +static void handle_transaction_done(struct smi_info *smi_info) +{ + struct ipmi_smi_msg *msg; +#ifdef DEBUG_TIMING + struct timeval t; + + do_gettimeofday(&t); + printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec); +#endif + switch (smi_info->si_state) { + case SI_NORMAL: + if (!smi_info->curr_msg) + break; + + smi_info->curr_msg->rsp_size + = smi_info->handlers->get_result( + smi_info->si_sm, + smi_info->curr_msg->rsp, + IPMI_MAX_MSG_LENGTH); + + /* Do this here becase deliver_recv_msg() releases the + lock, and a new message can be put in during the + time the lock is released. */ + msg = smi_info->curr_msg; + smi_info->curr_msg = NULL; + deliver_recv_msg(smi_info, msg); + break; + + case SI_GETTING_FLAGS: + { + unsigned char msg[4]; + unsigned int len; + + /* We got the flags from the SMI, now handle them. */ + len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + /* Error fetching flags, just give up for + now. */ + smi_info->si_state = SI_NORMAL; + } else if (len < 4) { + /* Hmm, no flags. That's technically illegal, but + don't use uninitialized data. */ + smi_info->si_state = SI_NORMAL; + } else { + smi_info->msg_flags = msg[3]; + handle_flags(smi_info); + } + break; + } + + case SI_CLEARING_FLAGS: + case SI_CLEARING_FLAGS_THEN_SET_IRQ: + { + unsigned char msg[3]; + + /* We cleared the flags. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 3); + if (msg[2] != 0) { + /* Error clearing flags */ + printk(KERN_WARNING + "ipmi_si: Error clearing flags: %2.2x\n", + msg[2]); + } + if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ) + start_enable_irq(smi_info); + else + smi_info->si_state = SI_NORMAL; + break; + } + + case SI_GETTING_EVENTS: + { + smi_info->curr_msg->rsp_size + = smi_info->handlers->get_result( + smi_info->si_sm, + smi_info->curr_msg->rsp, + IPMI_MAX_MSG_LENGTH); + + /* Do this here becase deliver_recv_msg() releases the + lock, and a new message can be put in during the + time the lock is released. */ + msg = smi_info->curr_msg; + smi_info->curr_msg = NULL; + if (msg->rsp[2] != 0) { + /* Error getting event, probably done. */ + msg->done(msg); + + /* Take off the event flag. */ + smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; + handle_flags(smi_info); + } else { + spin_lock(&smi_info->count_lock); + smi_info->events++; + spin_unlock(&smi_info->count_lock); + + /* Do this before we deliver the message + because delivering the message releases the + lock and something else can mess with the + state. */ + handle_flags(smi_info); + + deliver_recv_msg(smi_info, msg); + } + break; + } + + case SI_GETTING_MESSAGES: + { + smi_info->curr_msg->rsp_size + = smi_info->handlers->get_result( + smi_info->si_sm, + smi_info->curr_msg->rsp, + IPMI_MAX_MSG_LENGTH); + + /* Do this here becase deliver_recv_msg() releases the + lock, and a new message can be put in during the + time the lock is released. */ + msg = smi_info->curr_msg; + smi_info->curr_msg = NULL; + if (msg->rsp[2] != 0) { + /* Error getting event, probably done. */ + msg->done(msg); + + /* Take off the msg flag. */ + smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL; + handle_flags(smi_info); + } else { + spin_lock(&smi_info->count_lock); + smi_info->incoming_messages++; + spin_unlock(&smi_info->count_lock); + + /* Do this before we deliver the message + because delivering the message releases the + lock and something else can mess with the + state. */ + handle_flags(smi_info); + + deliver_recv_msg(smi_info, msg); + } + break; + } + + case SI_ENABLE_INTERRUPTS1: + { + unsigned char msg[4]; + + /* We got the flags from the SMI, now handle them. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + printk(KERN_WARNING + "ipmi_si: Could not enable interrupts" + ", failed get, using polled mode.\n"); + smi_info->si_state = SI_NORMAL; + } else { + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = msg[3] | 1; /* enable msg queue int */ + smi_info->handlers->start_transaction( + smi_info->si_sm, msg, 3); + smi_info->si_state = SI_ENABLE_INTERRUPTS2; + } + break; + } + + case SI_ENABLE_INTERRUPTS2: + { + unsigned char msg[4]; + + /* We got the flags from the SMI, now handle them. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + printk(KERN_WARNING + "ipmi_si: Could not enable interrupts" + ", failed set, using polled mode.\n"); + } + smi_info->si_state = SI_NORMAL; + break; + } + } +} + +/* Called on timeouts and events. Timeouts should pass the elapsed + time, interrupts should pass in zero. */ +static enum si_sm_result smi_event_handler(struct smi_info *smi_info, + int time) +{ + enum si_sm_result si_sm_result; + + restart: + /* There used to be a loop here that waited a little while + (around 25us) before giving up. That turned out to be + pointless, the minimum delays I was seeing were in the 300us + range, which is far too long to wait in an interrupt. So + we just run until the state machine tells us something + happened or it needs a delay. */ + si_sm_result = smi_info->handlers->event(smi_info->si_sm, time); + time = 0; + while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY) + { + si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); + } + + if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) + { + spin_lock(&smi_info->count_lock); + smi_info->complete_transactions++; + spin_unlock(&smi_info->count_lock); + + handle_transaction_done(smi_info); + si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); + } + else if (si_sm_result == SI_SM_HOSED) + { + spin_lock(&smi_info->count_lock); + smi_info->hosed_count++; + spin_unlock(&smi_info->count_lock); + + /* Do the before return_hosed_msg, because that + releases the lock. */ + smi_info->si_state = SI_NORMAL; + if (smi_info->curr_msg != NULL) { + /* If we were handling a user message, format + a response to send to the upper layer to + tell it about the error. */ + return_hosed_msg(smi_info); + } + si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); + } + + /* We prefer handling attn over new messages. */ + if (si_sm_result == SI_SM_ATTN) + { + unsigned char msg[2]; + + spin_lock(&smi_info->count_lock); + smi_info->attentions++; + spin_unlock(&smi_info->count_lock); + + /* Got a attn, send down a get message flags to see + what's causing it. It would be better to handle + this in the upper layer, but due to the way + interrupts work with the SMI, that's not really + possible. */ + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_GET_MSG_FLAGS_CMD; + + smi_info->handlers->start_transaction( + smi_info->si_sm, msg, 2); + smi_info->si_state = SI_GETTING_FLAGS; + goto restart; + } + + /* If we are currently idle, try to start the next message. */ + if (si_sm_result == SI_SM_IDLE) { + spin_lock(&smi_info->count_lock); + smi_info->idles++; + spin_unlock(&smi_info->count_lock); + + si_sm_result = start_next_msg(smi_info); + if (si_sm_result != SI_SM_IDLE) + goto restart; + } + + if ((si_sm_result == SI_SM_IDLE) + && (atomic_read(&smi_info->req_events))) + { + /* We are idle and the upper layer requested that I fetch + events, so do so. */ + unsigned char msg[2]; + + spin_lock(&smi_info->count_lock); + smi_info->flag_fetches++; + spin_unlock(&smi_info->count_lock); + + atomic_set(&smi_info->req_events, 0); + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_GET_MSG_FLAGS_CMD; + + smi_info->handlers->start_transaction( + smi_info->si_sm, msg, 2); + smi_info->si_state = SI_GETTING_FLAGS; + goto restart; + } + + return si_sm_result; +} + +static void sender(void *send_info, + struct ipmi_smi_msg *msg, + int priority) +{ + struct smi_info *smi_info = send_info; + enum si_sm_result result; + unsigned long flags; +#ifdef DEBUG_TIMING + struct timeval t; +#endif + + spin_lock_irqsave(&(smi_info->msg_lock), flags); +#ifdef DEBUG_TIMING + do_gettimeofday(&t); + printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec); +#endif + + if (smi_info->run_to_completion) { + /* If we are running to completion, then throw it in + the list and run transactions until everything is + clear. Priority doesn't matter here. */ + list_add_tail(&(msg->link), &(smi_info->xmit_msgs)); + + /* We have to release the msg lock and claim the smi + lock in this case, because of race conditions. */ + spin_unlock_irqrestore(&(smi_info->msg_lock), flags); + + spin_lock_irqsave(&(smi_info->si_lock), flags); + result = smi_event_handler(smi_info, 0); + while (result != SI_SM_IDLE) { + udelay(SI_SHORT_TIMEOUT_USEC); + result = smi_event_handler(smi_info, + SI_SHORT_TIMEOUT_USEC); + } + spin_unlock_irqrestore(&(smi_info->si_lock), flags); + return; + } else { + if (priority > 0) { + list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs)); + } else { + list_add_tail(&(msg->link), &(smi_info->xmit_msgs)); + } + } + spin_unlock_irqrestore(&(smi_info->msg_lock), flags); + + spin_lock_irqsave(&(smi_info->si_lock), flags); + if ((smi_info->si_state == SI_NORMAL) + && (smi_info->curr_msg == NULL)) + { + start_next_msg(smi_info); + si_restart_short_timer(smi_info); + } + spin_unlock_irqrestore(&(smi_info->si_lock), flags); +} + +static void set_run_to_completion(void *send_info, int i_run_to_completion) +{ + struct smi_info *smi_info = send_info; + enum si_sm_result result; + unsigned long flags; + + spin_lock_irqsave(&(smi_info->si_lock), flags); + + smi_info->run_to_completion = i_run_to_completion; + if (i_run_to_completion) { + result = smi_event_handler(smi_info, 0); + while (result != SI_SM_IDLE) { + udelay(SI_SHORT_TIMEOUT_USEC); + result = smi_event_handler(smi_info, + SI_SHORT_TIMEOUT_USEC); + } + } + + spin_unlock_irqrestore(&(smi_info->si_lock), flags); +} + +static void poll(void *send_info) +{ + struct smi_info *smi_info = send_info; + + smi_event_handler(smi_info, 0); +} + +static void request_events(void *send_info) +{ + struct smi_info *smi_info = send_info; + + atomic_set(&smi_info->req_events, 1); +} + +static int initialized = 0; + +/* Must be called with interrupts off and with the si_lock held. */ +static void si_restart_short_timer(struct smi_info *smi_info) +{ +#if defined(CONFIG_HIGH_RES_TIMERS) + unsigned long flags; + unsigned long jiffies_now; + + if (del_timer(&(smi_info->si_timer))) { + /* If we don't delete the timer, then it will go off + immediately, anyway. So we only process if we + actually delete the timer. */ + + /* We already have irqsave on, so no need for it + here. */ + read_lock(&xtime_lock); + jiffies_now = jiffies; + smi_info->si_timer.expires = jiffies_now; + smi_info->si_timer.sub_expires = get_arch_cycles(jiffies_now); + + add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC); + + add_timer(&(smi_info->si_timer)); + spin_lock_irqsave(&smi_info->count_lock, flags); + smi_info->timeout_restarts++; + spin_unlock_irqrestore(&smi_info->count_lock, flags); + } +#endif +} + +static void smi_timeout(unsigned long data) +{ + struct smi_info *smi_info = (struct smi_info *) data; + enum si_sm_result smi_result; + unsigned long flags; + unsigned long jiffies_now; + unsigned long time_diff; +#ifdef DEBUG_TIMING + struct timeval t; +#endif + + if (smi_info->stop_operation) { + smi_info->timer_stopped = 1; + return; + } + + spin_lock_irqsave(&(smi_info->si_lock), flags); +#ifdef DEBUG_TIMING + do_gettimeofday(&t); + printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec); +#endif + jiffies_now = jiffies; + time_diff = ((jiffies_now - smi_info->last_timeout_jiffies) + * SI_USEC_PER_JIFFY); + smi_result = smi_event_handler(smi_info, time_diff); + + spin_unlock_irqrestore(&(smi_info->si_lock), flags); + + smi_info->last_timeout_jiffies = jiffies_now; + + if ((smi_info->irq) && (! smi_info->interrupt_disabled)) { + /* Running with interrupts, only do long timeouts. */ + smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; + spin_lock_irqsave(&smi_info->count_lock, flags); + smi_info->long_timeouts++; + spin_unlock_irqrestore(&smi_info->count_lock, flags); + goto do_add_timer; + } + + /* If the state machine asks for a short delay, then shorten + the timer timeout. */ + if (smi_result == SI_SM_CALL_WITH_DELAY) { + spin_lock_irqsave(&smi_info->count_lock, flags); + smi_info->short_timeouts++; + spin_unlock_irqrestore(&smi_info->count_lock, flags); +#if defined(CONFIG_HIGH_RES_TIMERS) + read_lock(&xtime_lock); + smi_info->si_timer.expires = jiffies; + smi_info->si_timer.sub_expires + = get_arch_cycles(smi_info->si_timer.expires); + read_unlock(&xtime_lock); + add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC); +#else + smi_info->si_timer.expires = jiffies + 1; +#endif + } else { + spin_lock_irqsave(&smi_info->count_lock, flags); + smi_info->long_timeouts++; + spin_unlock_irqrestore(&smi_info->count_lock, flags); + smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; +#if defined(CONFIG_HIGH_RES_TIMERS) + smi_info->si_timer.sub_expires = 0; +#endif + } + + do_add_timer: + add_timer(&(smi_info->si_timer)); +} + +static irqreturn_t si_irq_handler(int irq, void *data, struct pt_regs *regs) +{ + struct smi_info *smi_info = data; + unsigned long flags; +#ifdef DEBUG_TIMING + struct timeval t; +#endif + + spin_lock_irqsave(&(smi_info->si_lock), flags); + + spin_lock(&smi_info->count_lock); + smi_info->interrupts++; + spin_unlock(&smi_info->count_lock); + + if (smi_info->stop_operation) + goto out; + +#ifdef DEBUG_TIMING + do_gettimeofday(&t); + printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); +#endif + smi_event_handler(smi_info, 0); + out: + spin_unlock_irqrestore(&(smi_info->si_lock), flags); + return IRQ_HANDLED; +} + +static struct ipmi_smi_handlers handlers = +{ + .owner = THIS_MODULE, + .sender = sender, + .request_events = request_events, + .set_run_to_completion = set_run_to_completion, + .poll = poll, +}; + +/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses, + a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */ + +#define SI_MAX_PARMS 4 +#define SI_MAX_DRIVERS ((SI_MAX_PARMS * 2) + 2) +static struct smi_info *smi_infos[SI_MAX_DRIVERS] = +{ NULL, NULL, NULL, NULL }; + +#define DEVICE_NAME "ipmi_si" + +#define DEFAULT_KCS_IO_PORT 0xca2 +#define DEFAULT_SMIC_IO_PORT 0xca9 +#define DEFAULT_BT_IO_PORT 0xe4 +#define DEFAULT_REGSPACING 1 + +static int si_trydefaults = 1; +static char *si_type[SI_MAX_PARMS]; +#define MAX_SI_TYPE_STR 30 +static char si_type_str[MAX_SI_TYPE_STR]; +static unsigned long addrs[SI_MAX_PARMS]; +static int num_addrs; +static unsigned int ports[SI_MAX_PARMS]; +static int num_ports; +static int irqs[SI_MAX_PARMS]; +static int num_irqs; +static int regspacings[SI_MAX_PARMS]; +static int num_regspacings = 0; +static int regsizes[SI_MAX_PARMS]; +static int num_regsizes = 0; +static int regshifts[SI_MAX_PARMS]; +static int num_regshifts = 0; +static int slave_addrs[SI_MAX_PARMS]; +static int num_slave_addrs = 0; + + +module_param_named(trydefaults, si_trydefaults, bool, 0); +MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the" + " default scan of the KCS and SMIC interface at the standard" + " address"); +module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0); +MODULE_PARM_DESC(type, "Defines the type of each interface, each" + " interface separated by commas. The types are 'kcs'," + " 'smic', and 'bt'. For example si_type=kcs,bt will set" + " the first interface to kcs and the second to bt"); +module_param_array(addrs, long, &num_addrs, 0); +MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the" + " addresses separated by commas. Only use if an interface" + " is in memory. Otherwise, set it to zero or leave" + " it blank."); +module_param_array(ports, int, &num_ports, 0); +MODULE_PARM_DESC(ports, "Sets the port address of each interface, the" + " addresses separated by commas. Only use if an interface" + " is a port. Otherwise, set it to zero or leave" + " it blank."); +module_param_array(irqs, int, &num_irqs, 0); +MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the" + " addresses separated by commas. Only use if an interface" + " has an interrupt. Otherwise, set it to zero or leave" + " it blank."); +module_param_array(regspacings, int, &num_regspacings, 0); +MODULE_PARM_DESC(regspacings, "The number of bytes between the start address" + " and each successive register used by the interface. For" + " instance, if the start address is 0xca2 and the spacing" + " is 2, then the second address is at 0xca4. Defaults" + " to 1."); +module_param_array(regsizes, int, &num_regsizes, 0); +MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes." + " This should generally be 1, 2, 4, or 8 for an 8-bit," + " 16-bit, 32-bit, or 64-bit register. Use this if you" + " the 8-bit IPMI register has to be read from a larger" + " register."); +module_param_array(regshifts, int, &num_regshifts, 0); +MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the." + " IPMI register, in bits. For instance, if the data" + " is read from a 32-bit word and the IPMI data is in" + " bit 8-15, then the shift would be 8"); +module_param_array(slave_addrs, int, &num_slave_addrs, 0); +MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" + " the controller. Normally this is 0x20, but can be" + " overridden by this parm. This is an array indexed" + " by interface number."); + + +#define IPMI_MEM_ADDR_SPACE 1 +#define IPMI_IO_ADDR_SPACE 2 + +#if defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_X86) || defined(CONFIG_PCI) +static int is_new_interface(int intf, u8 addr_space, unsigned long base_addr) +{ + int i; + + for (i = 0; i < SI_MAX_PARMS; ++i) { + /* Don't check our address. */ + if (i == intf) + continue; + if (si_type[i] != NULL) { + if ((addr_space == IPMI_MEM_ADDR_SPACE && + base_addr == addrs[i]) || + (addr_space == IPMI_IO_ADDR_SPACE && + base_addr == ports[i])) + return 0; + } + else + break; + } + + return 1; +} +#endif + +static int std_irq_setup(struct smi_info *info) +{ + int rv; + + if (!info->irq) + return 0; + + rv = request_irq(info->irq, + si_irq_handler, + SA_INTERRUPT, + DEVICE_NAME, + info); + if (rv) { + printk(KERN_WARNING + "ipmi_si: %s unable to claim interrupt %d," + " running polled\n", + DEVICE_NAME, info->irq); + info->irq = 0; + } else { + printk(" Using irq %d\n", info->irq); + } + + return rv; +} + +static void std_irq_cleanup(struct smi_info *info) +{ + if (!info->irq) + return; + + free_irq(info->irq, info); +} + +static unsigned char port_inb(struct si_sm_io *io, unsigned int offset) +{ + unsigned int *addr = io->info; + + return inb((*addr)+(offset*io->regspacing)); +} + +static void port_outb(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + unsigned int *addr = io->info; + + outb(b, (*addr)+(offset * io->regspacing)); +} + +static unsigned char port_inw(struct si_sm_io *io, unsigned int offset) +{ + unsigned int *addr = io->info; + + return (inw((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff; +} + +static void port_outw(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + unsigned int *addr = io->info; + + outw(b << io->regshift, (*addr)+(offset * io->regspacing)); +} + +static unsigned char port_inl(struct si_sm_io *io, unsigned int offset) +{ + unsigned int *addr = io->info; + + return (inl((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff; +} + +static void port_outl(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + unsigned int *addr = io->info; + + outl(b << io->regshift, (*addr)+(offset * io->regspacing)); +} + +static void port_cleanup(struct smi_info *info) +{ + unsigned int *addr = info->io.info; + int mapsize; + + if (addr && (*addr)) { + mapsize = ((info->io_size * info->io.regspacing) + - (info->io.regspacing - info->io.regsize)); + + release_region (*addr, mapsize); + } + kfree(info); +} + +static int port_setup(struct smi_info *info) +{ + unsigned int *addr = info->io.info; + int mapsize; + + if (!addr || (!*addr)) + return -ENODEV; + + info->io_cleanup = port_cleanup; + + /* Figure out the actual inb/inw/inl/etc routine to use based + upon the register size. */ + switch (info->io.regsize) { + case 1: + info->io.inputb = port_inb; + info->io.outputb = port_outb; + break; + case 2: + info->io.inputb = port_inw; + info->io.outputb = port_outw; + break; + case 4: + info->io.inputb = port_inl; + info->io.outputb = port_outl; + break; + default: + printk("ipmi_si: Invalid register size: %d\n", + info->io.regsize); + return -EINVAL; + } + + /* Calculate the total amount of memory to claim. This is an + * unusual looking calculation, but it avoids claiming any + * more memory than it has to. It will claim everything + * between the first address to the end of the last full + * register. */ + mapsize = ((info->io_size * info->io.regspacing) + - (info->io.regspacing - info->io.regsize)); + + if (request_region(*addr, mapsize, DEVICE_NAME) == NULL) + return -EIO; + return 0; +} + +static int try_init_port(int intf_num, struct smi_info **new_info) +{ + struct smi_info *info; + + if (!ports[intf_num]) + return -ENODEV; + + if (!is_new_interface(intf_num, IPMI_IO_ADDR_SPACE, + ports[intf_num])) + return -ENODEV; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "ipmi_si: Could not allocate SI data (1)\n"); + return -ENOMEM; + } + memset(info, 0, sizeof(*info)); + + info->io_setup = port_setup; + info->io.info = &(ports[intf_num]); + info->io.addr = NULL; + info->io.regspacing = regspacings[intf_num]; + if (!info->io.regspacing) + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = regsizes[intf_num]; + if (!info->io.regsize) + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = regshifts[intf_num]; + info->irq = 0; + info->irq_setup = NULL; + *new_info = info; + + if (si_type[intf_num] == NULL) + si_type[intf_num] = "kcs"; + + printk("ipmi_si: Trying \"%s\" at I/O port 0x%x\n", + si_type[intf_num], ports[intf_num]); + return 0; +} + +static unsigned char mem_inb(struct si_sm_io *io, unsigned int offset) +{ + return readb((io->addr)+(offset * io->regspacing)); +} + +static void mem_outb(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + writeb(b, (io->addr)+(offset * io->regspacing)); +} + +static unsigned char mem_inw(struct si_sm_io *io, unsigned int offset) +{ + return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift) + && 0xff; +} + +static void mem_outw(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + writeb(b << io->regshift, (io->addr)+(offset * io->regspacing)); +} + +static unsigned char mem_inl(struct si_sm_io *io, unsigned int offset) +{ + return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift) + && 0xff; +} + +static void mem_outl(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + writel(b << io->regshift, (io->addr)+(offset * io->regspacing)); +} + +#ifdef readq +static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset) +{ + return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift) + && 0xff; +} + +static void mem_outq(struct si_sm_io *io, unsigned int offset, + unsigned char b) +{ + writeq(b << io->regshift, (io->addr)+(offset * io->regspacing)); +} +#endif + +static void mem_cleanup(struct smi_info *info) +{ + unsigned long *addr = info->io.info; + int mapsize; + + if (info->io.addr) { + iounmap(info->io.addr); + + mapsize = ((info->io_size * info->io.regspacing) + - (info->io.regspacing - info->io.regsize)); + + release_mem_region(*addr, mapsize); + } + kfree(info); +} + +static int mem_setup(struct smi_info *info) +{ + unsigned long *addr = info->io.info; + int mapsize; + + if (!addr || (!*addr)) + return -ENODEV; + + info->io_cleanup = mem_cleanup; + + /* Figure out the actual readb/readw/readl/etc routine to use based + upon the register size. */ + switch (info->io.regsize) { + case 1: + info->io.inputb = mem_inb; + info->io.outputb = mem_outb; + break; + case 2: + info->io.inputb = mem_inw; + info->io.outputb = mem_outw; + break; + case 4: + info->io.inputb = mem_inl; + info->io.outputb = mem_outl; + break; +#ifdef readq + case 8: + info->io.inputb = mem_inq; + info->io.outputb = mem_outq; + break; +#endif + default: + printk("ipmi_si: Invalid register size: %d\n", + info->io.regsize); + return -EINVAL; + } + + /* Calculate the total amount of memory to claim. This is an + * unusual looking calculation, but it avoids claiming any + * more memory than it has to. It will claim everything + * between the first address to the end of the last full + * register. */ + mapsize = ((info->io_size * info->io.regspacing) + - (info->io.regspacing - info->io.regsize)); + + if (request_mem_region(*addr, mapsize, DEVICE_NAME) == NULL) + return -EIO; + + info->io.addr = ioremap(*addr, mapsize); + if (info->io.addr == NULL) { + release_mem_region(*addr, mapsize); + return -EIO; + } + return 0; +} + +static int try_init_mem(int intf_num, struct smi_info **new_info) +{ + struct smi_info *info; + + if (!addrs[intf_num]) + return -ENODEV; + + if (!is_new_interface(intf_num, IPMI_MEM_ADDR_SPACE, + addrs[intf_num])) + return -ENODEV; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "ipmi_si: Could not allocate SI data (2)\n"); + return -ENOMEM; + } + memset(info, 0, sizeof(*info)); + + info->io_setup = mem_setup; + info->io.info = &addrs[intf_num]; + info->io.addr = NULL; + info->io.regspacing = regspacings[intf_num]; + if (!info->io.regspacing) + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = regsizes[intf_num]; + if (!info->io.regsize) + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = regshifts[intf_num]; + info->irq = 0; + info->irq_setup = NULL; + *new_info = info; + + if (si_type[intf_num] == NULL) + si_type[intf_num] = "kcs"; + + printk("ipmi_si: Trying \"%s\" at memory address 0x%lx\n", + si_type[intf_num], addrs[intf_num]); + return 0; +} + + +#ifdef CONFIG_ACPI_INTERPRETER + +#include + +/* Once we get an ACPI failure, we don't try any more, because we go + through the tables sequentially. Once we don't find a table, there + are no more. */ +static int acpi_failure = 0; + +/* For GPE-type interrupts. */ +static u32 ipmi_acpi_gpe(void *context) +{ + struct smi_info *smi_info = context; + unsigned long flags; +#ifdef DEBUG_TIMING + struct timeval t; +#endif + + spin_lock_irqsave(&(smi_info->si_lock), flags); + + spin_lock(&smi_info->count_lock); + smi_info->interrupts++; + spin_unlock(&smi_info->count_lock); + + if (smi_info->stop_operation) + goto out; + +#ifdef DEBUG_TIMING + do_gettimeofday(&t); + printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec); +#endif + smi_event_handler(smi_info, 0); + out: + spin_unlock_irqrestore(&(smi_info->si_lock), flags); + + return ACPI_INTERRUPT_HANDLED; +} + +static int acpi_gpe_irq_setup(struct smi_info *info) +{ + acpi_status status; + + if (!info->irq) + return 0; + + /* FIXME - is level triggered right? */ + status = acpi_install_gpe_handler(NULL, + info->irq, + ACPI_GPE_LEVEL_TRIGGERED, + &ipmi_acpi_gpe, + info); + if (status != AE_OK) { + printk(KERN_WARNING + "ipmi_si: %s unable to claim ACPI GPE %d," + " running polled\n", + DEVICE_NAME, info->irq); + info->irq = 0; + return -EINVAL; + } else { + printk(" Using ACPI GPE %d\n", info->irq); + return 0; + } +} + +static void acpi_gpe_irq_cleanup(struct smi_info *info) +{ + if (!info->irq) + return; + + acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe); +} + +/* + * Defined at + * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf + */ +struct SPMITable { + s8 Signature[4]; + u32 Length; + u8 Revision; + u8 Checksum; + s8 OEMID[6]; + s8 OEMTableID[8]; + s8 OEMRevision[4]; + s8 CreatorID[4]; + s8 CreatorRevision[4]; + u8 InterfaceType; + u8 IPMIlegacy; + s16 SpecificationRevision; + + /* + * Bit 0 - SCI interrupt supported + * Bit 1 - I/O APIC/SAPIC + */ + u8 InterruptType; + + /* If bit 0 of InterruptType is set, then this is the SCI + interrupt in the GPEx_STS register. */ + u8 GPE; + + s16 Reserved; + + /* If bit 1 of InterruptType is set, then this is the I/O + APIC/SAPIC interrupt. */ + u32 GlobalSystemInterrupt; + + /* The actual register address. */ + struct acpi_generic_address addr; + + u8 UID[4]; + + s8 spmi_id[1]; /* A '\0' terminated array starts here. */ +}; + +static int try_init_acpi(int intf_num, struct smi_info **new_info) +{ + struct smi_info *info; + acpi_status status; + struct SPMITable *spmi; + char *io_type; + u8 addr_space; + + if (acpi_failure) + return -ENODEV; + + status = acpi_get_firmware_table("SPMI", intf_num+1, + ACPI_LOGICAL_ADDRESSING, + (struct acpi_table_header **) &spmi); + if (status != AE_OK) { + acpi_failure = 1; + return -ENODEV; + } + + if (spmi->IPMIlegacy != 1) { + printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy); + return -ENODEV; + } + + if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) + addr_space = IPMI_MEM_ADDR_SPACE; + else + addr_space = IPMI_IO_ADDR_SPACE; + if (!is_new_interface(-1, addr_space, spmi->addr.address)) + return -ENODEV; + + if (!spmi->addr.register_bit_width) { + acpi_failure = 1; + return -ENODEV; + } + + /* Figure out the interface type. */ + switch (spmi->InterfaceType) + { + case 1: /* KCS */ + si_type[intf_num] = "kcs"; + break; + + case 2: /* SMIC */ + si_type[intf_num] = "smic"; + break; + + case 3: /* BT */ + si_type[intf_num] = "bt"; + break; + + default: + printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n", + spmi->InterfaceType); + return -EIO; + } + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n"); + return -ENOMEM; + } + memset(info, 0, sizeof(*info)); + + if (spmi->InterruptType & 1) { + /* We've got a GPE interrupt. */ + info->irq = spmi->GPE; + info->irq_setup = acpi_gpe_irq_setup; + info->irq_cleanup = acpi_gpe_irq_cleanup; + } else if (spmi->InterruptType & 2) { + /* We've got an APIC/SAPIC interrupt. */ + info->irq = spmi->GlobalSystemInterrupt; + info->irq_setup = std_irq_setup; + info->irq_cleanup = std_irq_cleanup; + } else { + /* Use the default interrupt setting. */ + info->irq = 0; + info->irq_setup = NULL; + } + + regspacings[intf_num] = spmi->addr.register_bit_width / 8; + info->io.regspacing = spmi->addr.register_bit_width / 8; + regsizes[intf_num] = regspacings[intf_num]; + info->io.regsize = regsizes[intf_num]; + regshifts[intf_num] = spmi->addr.register_bit_offset; + info->io.regshift = regshifts[intf_num]; + + if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + io_type = "memory"; + info->io_setup = mem_setup; + addrs[intf_num] = spmi->addr.address; + info->io.info = &(addrs[intf_num]); + } else if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_IO) { + io_type = "I/O"; + info->io_setup = port_setup; + ports[intf_num] = spmi->addr.address; + info->io.info = &(ports[intf_num]); + } else { + kfree(info); + printk("ipmi_si: Unknown ACPI I/O Address type\n"); + return -EIO; + } + + *new_info = info; + + printk("ipmi_si: ACPI/SPMI specifies \"%s\" %s SI @ 0x%lx\n", + si_type[intf_num], io_type, (unsigned long) spmi->addr.address); + return 0; +} +#endif + +#ifdef CONFIG_X86 +typedef struct dmi_ipmi_data +{ + u8 type; + u8 addr_space; + unsigned long base_addr; + u8 irq; + u8 offset; + u8 slave_addr; +} dmi_ipmi_data_t; + +static dmi_ipmi_data_t dmi_data[SI_MAX_DRIVERS]; +static int dmi_data_entries; + +typedef struct dmi_header +{ + u8 type; + u8 length; + u16 handle; +} dmi_header_t; + +static int decode_dmi(dmi_header_t *dm, int intf_num) +{ + u8 *data = (u8 *)dm; + unsigned long base_addr; + u8 reg_spacing; + u8 len = dm->length; + dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; + + ipmi_data->type = data[4]; + + memcpy(&base_addr, data+8, sizeof(unsigned long)); + if (len >= 0x11) { + if (base_addr & 1) { + /* I/O */ + base_addr &= 0xFFFE; + ipmi_data->addr_space = IPMI_IO_ADDR_SPACE; + } + else { + /* Memory */ + ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE; + } + /* If bit 4 of byte 0x10 is set, then the lsb for the address + is odd. */ + ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); + + ipmi_data->irq = data[0x11]; + + /* The top two bits of byte 0x10 hold the register spacing. */ + reg_spacing = (data[0x10] & 0xC0) >> 6; + switch(reg_spacing){ + case 0x00: /* Byte boundaries */ + ipmi_data->offset = 1; + break; + case 0x01: /* 32-bit boundaries */ + ipmi_data->offset = 4; + break; + case 0x02: /* 16-byte boundaries */ + ipmi_data->offset = 16; + break; + default: + /* Some other interface, just ignore it. */ + return -EIO; + } + } else { + /* Old DMI spec. */ + ipmi_data->base_addr = base_addr; + ipmi_data->addr_space = IPMI_IO_ADDR_SPACE; + ipmi_data->offset = 1; + } + + ipmi_data->slave_addr = data[6]; + + if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) { + dmi_data_entries++; + return 0; + } + + memset(ipmi_data, 0, sizeof(dmi_ipmi_data_t)); + + return -1; +} + +static int dmi_table(u32 base, int len, int num) +{ + u8 *buf; + struct dmi_header *dm; + u8 *data; + int i=1; + int status=-1; + int intf_num = 0; + + buf = ioremap(base, len); + if(buf==NULL) + return -1; + + data = buf; + + while(ilength) >= len) + break; + + if (dm->type == 38) { + if (decode_dmi(dm, intf_num) == 0) { + intf_num++; + if (intf_num >= SI_MAX_DRIVERS) + break; + } + } + + data+=dm->length; + while((data-buf) < len && (*data || data[1])) + data++; + data+=2; + i++; + } + iounmap(buf); + + return status; +} + +inline static int dmi_checksum(u8 *buf) +{ + u8 sum=0; + int a; + + for(a=0; a<15; a++) + sum+=buf[a]; + return (sum==0); +} + +static int dmi_decode(void) +{ + u8 buf[15]; + u32 fp=0xF0000; + +#ifdef CONFIG_SIMNOW + return -1; +#endif + + while(fp < 0xFFFFF) + { + isa_memcpy_fromio(buf, fp, 15); + if(memcmp(buf, "_DMI_", 5)==0 && dmi_checksum(buf)) + { + u16 num=buf[13]<<8|buf[12]; + u16 len=buf[7]<<8|buf[6]; + u32 base=buf[11]<<24|buf[10]<<16|buf[9]<<8|buf[8]; + + if(dmi_table(base, len, num) == 0) + return 0; + } + fp+=16; + } + + return -1; +} + +static int try_init_smbios(int intf_num, struct smi_info **new_info) +{ + struct smi_info *info; + dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; + char *io_type; + + if (intf_num >= dmi_data_entries) + return -ENODEV; + + switch(ipmi_data->type) { + case 0x01: /* KCS */ + si_type[intf_num] = "kcs"; + break; + case 0x02: /* SMIC */ + si_type[intf_num] = "smic"; + break; + case 0x03: /* BT */ + si_type[intf_num] = "bt"; + break; + default: + return -EIO; + } + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "ipmi_si: Could not allocate SI data (4)\n"); + return -ENOMEM; + } + memset(info, 0, sizeof(*info)); + + if (ipmi_data->addr_space == 1) { + io_type = "memory"; + info->io_setup = mem_setup; + addrs[intf_num] = ipmi_data->base_addr; + info->io.info = &(addrs[intf_num]); + } else if (ipmi_data->addr_space == 2) { + io_type = "I/O"; + info->io_setup = port_setup; + ports[intf_num] = ipmi_data->base_addr; + info->io.info = &(ports[intf_num]); + } else { + kfree(info); + printk("ipmi_si: Unknown SMBIOS I/O Address type.\n"); + return -EIO; + } + + regspacings[intf_num] = ipmi_data->offset; + info->io.regspacing = regspacings[intf_num]; + if (!info->io.regspacing) + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = regshifts[intf_num]; + + info->slave_addr = ipmi_data->slave_addr; + + irqs[intf_num] = ipmi_data->irq; + + *new_info = info; + + printk("ipmi_si: Found SMBIOS-specified state machine at %s" + " address 0x%lx, slave address 0x%x\n", + io_type, (unsigned long)ipmi_data->base_addr, + ipmi_data->slave_addr); + return 0; +} +#endif /* CONFIG_X86 */ + +#ifdef CONFIG_PCI + +#define PCI_ERMC_CLASSCODE 0x0C0700 +#define PCI_HP_VENDOR_ID 0x103C +#define PCI_MMC_DEVICE_ID 0x121A +#define PCI_MMC_ADDR_CW 0x10 + +/* Avoid more than one attempt to probe pci smic. */ +static int pci_smic_checked = 0; + +static int find_pci_smic(int intf_num, struct smi_info **new_info) +{ + struct smi_info *info; + int error; + struct pci_dev *pci_dev = NULL; + u16 base_addr; + int fe_rmc = 0; + + if (pci_smic_checked) + return -ENODEV; + + pci_smic_checked = 1; + + if ((pci_dev = pci_get_device(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID, + NULL))) + ; + else if ((pci_dev = pci_get_class(PCI_ERMC_CLASSCODE, NULL)) && + pci_dev->subsystem_vendor == PCI_HP_VENDOR_ID) + fe_rmc = 1; + else + return -ENODEV; + + error = pci_read_config_word(pci_dev, PCI_MMC_ADDR_CW, &base_addr); + if (error) + { + pci_dev_put(pci_dev); + printk(KERN_ERR + "ipmi_si: pci_read_config_word() failed (%d).\n", + error); + return -ENODEV; + } + + /* Bit 0: 1 specifies programmed I/O, 0 specifies memory mapped I/O */ + if (!(base_addr & 0x0001)) + { + pci_dev_put(pci_dev); + printk(KERN_ERR + "ipmi_si: memory mapped I/O not supported for PCI" + " smic.\n"); + return -ENODEV; + } + + base_addr &= 0xFFFE; + if (!fe_rmc) + /* Data register starts at base address + 1 in eRMC */ + ++base_addr; + + if (!is_new_interface(-1, IPMI_IO_ADDR_SPACE, base_addr)) { + pci_dev_put(pci_dev); + return -ENODEV; + } + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + pci_dev_put(pci_dev); + printk(KERN_ERR "ipmi_si: Could not allocate SI data (5)\n"); + return -ENOMEM; + } + memset(info, 0, sizeof(*info)); + + info->io_setup = port_setup; + ports[intf_num] = base_addr; + info->io.info = &(ports[intf_num]); + info->io.regspacing = regspacings[intf_num]; + if (!info->io.regspacing) + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = regshifts[intf_num]; + + *new_info = info; + + irqs[intf_num] = pci_dev->irq; + si_type[intf_num] = "smic"; + + printk("ipmi_si: Found PCI SMIC at I/O address 0x%lx\n", + (long unsigned int) base_addr); + + pci_dev_put(pci_dev); + return 0; +} +#endif /* CONFIG_PCI */ + +static int try_init_plug_and_play(int intf_num, struct smi_info **new_info) +{ +#ifdef CONFIG_PCI + if (find_pci_smic(intf_num, new_info)==0) + return 0; +#endif + /* Include other methods here. */ + + return -ENODEV; +} + + +static int try_get_dev_id(struct smi_info *smi_info) +{ + unsigned char msg[2]; + unsigned char *resp; + unsigned long resp_len; + enum si_sm_result smi_result; + int rv = 0; + + resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + /* Do a Get Device ID command, since it comes back with some + useful info. */ + msg[0] = IPMI_NETFN_APP_REQUEST << 2; + msg[1] = IPMI_GET_DEVICE_ID_CMD; + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + + smi_result = smi_info->handlers->event(smi_info->si_sm, 0); + for (;;) + { + if (smi_result == SI_SM_CALL_WITH_DELAY) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + smi_result = smi_info->handlers->event( + smi_info->si_sm, 100); + } + else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) + { + smi_result = smi_info->handlers->event( + smi_info->si_sm, 0); + } + else + break; + } + if (smi_result == SI_SM_HOSED) { + /* We couldn't get the state machine to run, so whatever's at + the port is probably not an IPMI SMI interface. */ + rv = -ENODEV; + goto out; + } + + /* Otherwise, we got some data. */ + resp_len = smi_info->handlers->get_result(smi_info->si_sm, + resp, IPMI_MAX_MSG_LENGTH); + if (resp_len < 6) { + /* That's odd, it should be longer. */ + rv = -EINVAL; + goto out; + } + + if ((resp[1] != IPMI_GET_DEVICE_ID_CMD) || (resp[2] != 0)) { + /* That's odd, it shouldn't be able to fail. */ + rv = -EINVAL; + goto out; + } + + /* Record info from the get device id, in case we need it. */ + smi_info->ipmi_si_dev_rev = resp[4] & 0xf; + smi_info->ipmi_si_fw_rev_major = resp[5] & 0x7f; + smi_info->ipmi_si_fw_rev_minor = resp[6]; + smi_info->ipmi_version_major = resp[7] & 0xf; + smi_info->ipmi_version_minor = resp[7] >> 4; + + out: + kfree(resp); + return rv; +} + +static int type_file_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *out = (char *) page; + struct smi_info *smi = data; + + switch (smi->si_type) { + case SI_KCS: + return sprintf(out, "kcs\n"); + case SI_SMIC: + return sprintf(out, "smic\n"); + case SI_BT: + return sprintf(out, "bt\n"); + default: + return 0; + } +} + +static int stat_file_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *out = (char *) page; + struct smi_info *smi = data; + + out += sprintf(out, "interrupts_enabled: %d\n", + smi->irq && !smi->interrupt_disabled); + out += sprintf(out, "short_timeouts: %ld\n", + smi->short_timeouts); + out += sprintf(out, "long_timeouts: %ld\n", + smi->long_timeouts); + out += sprintf(out, "timeout_restarts: %ld\n", + smi->timeout_restarts); + out += sprintf(out, "idles: %ld\n", + smi->idles); + out += sprintf(out, "interrupts: %ld\n", + smi->interrupts); + out += sprintf(out, "attentions: %ld\n", + smi->attentions); + out += sprintf(out, "flag_fetches: %ld\n", + smi->flag_fetches); + out += sprintf(out, "hosed_count: %ld\n", + smi->hosed_count); + out += sprintf(out, "complete_transactions: %ld\n", + smi->complete_transactions); + out += sprintf(out, "events: %ld\n", + smi->events); + out += sprintf(out, "watchdog_pretimeouts: %ld\n", + smi->watchdog_pretimeouts); + out += sprintf(out, "incoming_messages: %ld\n", + smi->incoming_messages); + + return (out - ((char *) page)); +} + +/* Returns 0 if initialized, or negative on an error. */ +static int init_one_smi(int intf_num, struct smi_info **smi) +{ + int rv; + struct smi_info *new_smi; + + + rv = try_init_mem(intf_num, &new_smi); + if (rv) + rv = try_init_port(intf_num, &new_smi); +#ifdef CONFIG_ACPI_INTERPRETER + if ((rv) && (si_trydefaults)) { + rv = try_init_acpi(intf_num, &new_smi); + } +#endif +#ifdef CONFIG_X86 + if ((rv) && (si_trydefaults)) { + rv = try_init_smbios(intf_num, &new_smi); + } +#endif + if ((rv) && (si_trydefaults)) { + rv = try_init_plug_and_play(intf_num, &new_smi); + } + + + if (rv) + return rv; + + /* So we know not to free it unless we have allocated one. */ + new_smi->intf = NULL; + new_smi->si_sm = NULL; + new_smi->handlers = NULL; + + if (!new_smi->irq_setup) { + new_smi->irq = irqs[intf_num]; + new_smi->irq_setup = std_irq_setup; + new_smi->irq_cleanup = std_irq_cleanup; + } + + /* Default to KCS if no type is specified. */ + if (si_type[intf_num] == NULL) { + if (si_trydefaults) + si_type[intf_num] = "kcs"; + else { + rv = -EINVAL; + goto out_err; + } + } + + /* Set up the state machine to use. */ + if (strcmp(si_type[intf_num], "kcs") == 0) { + new_smi->handlers = &kcs_smi_handlers; + new_smi->si_type = SI_KCS; + } else if (strcmp(si_type[intf_num], "smic") == 0) { + new_smi->handlers = &smic_smi_handlers; + new_smi->si_type = SI_SMIC; + } else if (strcmp(si_type[intf_num], "bt") == 0) { + new_smi->handlers = &bt_smi_handlers; + new_smi->si_type = SI_BT; + } else { + /* No support for anything else yet. */ + rv = -EIO; + goto out_err; + } + + /* Allocate the state machine's data and initialize it. */ + new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL); + if (!new_smi->si_sm) { + printk(" Could not allocate state machine memory\n"); + rv = -ENOMEM; + goto out_err; + } + new_smi->io_size = new_smi->handlers->init_data(new_smi->si_sm, + &new_smi->io); + + /* Now that we know the I/O size, we can set up the I/O. */ + rv = new_smi->io_setup(new_smi); + if (rv) { + printk(" Could not set up I/O space\n"); + goto out_err; + } + + spin_lock_init(&(new_smi->si_lock)); + spin_lock_init(&(new_smi->msg_lock)); + spin_lock_init(&(new_smi->count_lock)); + + /* Do low-level detection first. */ + if (new_smi->handlers->detect(new_smi->si_sm)) { + rv = -ENODEV; + goto out_err; + } + + /* Attempt a get device id command. If it fails, we probably + don't have a SMI here. */ + rv = try_get_dev_id(new_smi); + if (rv) + goto out_err; + + /* Try to claim any interrupts. */ + new_smi->irq_setup(new_smi); + + INIT_LIST_HEAD(&(new_smi->xmit_msgs)); + INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs)); + new_smi->curr_msg = NULL; + atomic_set(&new_smi->req_events, 0); + new_smi->run_to_completion = 0; + + new_smi->interrupt_disabled = 0; + new_smi->timer_stopped = 0; + new_smi->stop_operation = 0; + + /* Start clearing the flags before we enable interrupts or the + timer to avoid racing with the timer. */ + start_clear_flags(new_smi); + /* IRQ is defined to be set when non-zero. */ + if (new_smi->irq) + new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ; + + /* The ipmi_register_smi() code does some operations to + determine the channel information, so we must be ready to + handle operations before it is called. This means we have + to stop the timer if we get an error after this point. */ + init_timer(&(new_smi->si_timer)); + new_smi->si_timer.data = (long) new_smi; + new_smi->si_timer.function = smi_timeout; + new_smi->last_timeout_jiffies = jiffies; + new_smi->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; + add_timer(&(new_smi->si_timer)); + + rv = ipmi_register_smi(&handlers, + new_smi, + new_smi->ipmi_version_major, + new_smi->ipmi_version_minor, + new_smi->slave_addr, + &(new_smi->intf)); + if (rv) { + printk(KERN_ERR + "ipmi_si: Unable to register device: error %d\n", + rv); + goto out_err_stop_timer; + } + + rv = ipmi_smi_add_proc_entry(new_smi->intf, "type", + type_file_read_proc, NULL, + new_smi, THIS_MODULE); + if (rv) { + printk(KERN_ERR + "ipmi_si: Unable to create proc entry: %d\n", + rv); + goto out_err_stop_timer; + } + + rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats", + stat_file_read_proc, NULL, + new_smi, THIS_MODULE); + if (rv) { + printk(KERN_ERR + "ipmi_si: Unable to create proc entry: %d\n", + rv); + goto out_err_stop_timer; + } + + *smi = new_smi; + + printk(" IPMI %s interface initialized\n", si_type[intf_num]); + + return 0; + + out_err_stop_timer: + new_smi->stop_operation = 1; + + /* Wait for the timer to stop. This avoids problems with race + conditions removing the timer here. */ + while (!new_smi->timer_stopped) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + } + + out_err: + if (new_smi->intf) + ipmi_unregister_smi(new_smi->intf); + + new_smi->irq_cleanup(new_smi); + + /* Wait until we know that we are out of any interrupt + handlers might have been running before we freed the + interrupt. */ + synchronize_kernel(); + + if (new_smi->si_sm) { + if (new_smi->handlers) + new_smi->handlers->cleanup(new_smi->si_sm); + kfree(new_smi->si_sm); + } + new_smi->io_cleanup(new_smi); + + return rv; +} + +static __init int init_ipmi_si(void) +{ + int rv = 0; + int pos = 0; + int i; + char *str; + + if (initialized) + return 0; + initialized = 1; + + /* Parse out the si_type string into its components. */ + str = si_type_str; + if (*str != '\0') { + for (i=0; (isi_lock), flags); + spin_lock(&(to_clean->msg_lock)); + + to_clean->stop_operation = 1; + + to_clean->irq_cleanup(to_clean); + + spin_unlock(&(to_clean->msg_lock)); + spin_unlock_irqrestore(&(to_clean->si_lock), flags); + + /* Wait until we know that we are out of any interrupt + handlers might have been running before we freed the + interrupt. */ + synchronize_kernel(); + + /* Wait for the timer to stop. This avoids problems with race + conditions removing the timer here. */ + while (!to_clean->timer_stopped) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + } + + /* Interrupts and timeouts are stopped, now make sure the + interface is in a clean state. */ + while ((to_clean->curr_msg) || (to_clean->si_state != SI_NORMAL)) { + poll(to_clean); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + } + + rv = ipmi_unregister_smi(to_clean->intf); + if (rv) { + printk(KERN_ERR + "ipmi_si: Unable to unregister device: errno=%d\n", + rv); + } + + to_clean->handlers->cleanup(to_clean->si_sm); + + kfree(to_clean->si_sm); + + to_clean->io_cleanup(to_clean); +} + +static __exit void cleanup_ipmi_si(void) +{ + int i; + + if (!initialized) + return; + + for (i=0; i + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* This is defined by the state machines themselves, it is an opaque + data type for them to use. */ +struct si_sm_data; + +/* The structure for doing I/O in the state machine. The state + machine doesn't have the actual I/O routines, they are done through + this interface. */ +struct si_sm_io +{ + unsigned char (*inputb)(struct si_sm_io *io, unsigned int offset); + void (*outputb)(struct si_sm_io *io, + unsigned int offset, + unsigned char b); + + /* Generic info used by the actual handling routines, the + state machine shouldn't touch these. */ + void *info; + void *addr; + int regspacing; + int regsize; + int regshift; +}; + +/* Results of SMI events. */ +enum si_sm_result +{ + SI_SM_CALL_WITHOUT_DELAY, /* Call the driver again immediately */ + SI_SM_CALL_WITH_DELAY, /* Delay some before calling again. */ + SI_SM_TRANSACTION_COMPLETE, /* A transaction is finished. */ + SI_SM_IDLE, /* The SM is in idle state. */ + SI_SM_HOSED, /* The hardware violated the state machine. */ + SI_SM_ATTN /* The hardware is asserting attn and the + state machine is idle. */ +}; + +/* Handlers for the SMI state machine. */ +struct si_sm_handlers +{ + /* Put the version number of the state machine here so the + upper layer can print it. */ + char *version; + + /* Initialize the data and return the amount of I/O space to + reserve for the space. */ + unsigned int (*init_data)(struct si_sm_data *smi, + struct si_sm_io *io); + + /* Start a new transaction in the state machine. This will + return -2 if the state machine is not idle, -1 if the size + is invalid (to large or too small), or 0 if the transaction + is successfully completed. */ + int (*start_transaction)(struct si_sm_data *smi, + unsigned char *data, unsigned int size); + + /* Return the results after the transaction. This will return + -1 if the buffer is too small, zero if no transaction is + present, or the actual length of the result data. */ + int (*get_result)(struct si_sm_data *smi, + unsigned char *data, unsigned int length); + + /* Call this periodically (for a polled interface) or upon + receiving an interrupt (for a interrupt-driven interface). + If interrupt driven, you should probably poll this + periodically when not in idle state. This should be called + with the time that passed since the last call, if it is + significant. Time is in microseconds. */ + enum si_sm_result (*event)(struct si_sm_data *smi, long time); + + /* Attempt to detect an SMI. Returns 0 on success or nonzero + on failure. */ + int (*detect)(struct si_sm_data *smi); + + /* The interface is shutting down, so clean it up. */ + void (*cleanup)(struct si_sm_data *smi); + + /* Return the size of the SMI structure in bytes. */ + int (*size)(void); +}; + +/* Current state machines that we can use. */ +extern struct si_sm_handlers kcs_smi_handlers; +extern struct si_sm_handlers smic_smi_handlers; +extern struct si_sm_handlers bt_smi_handlers; + diff --git a/drivers/char/ipmi/ipmi_smic_sm.c b/drivers/char/ipmi/ipmi_smic_sm.c new file mode 100644 index 000000000000..ae18747e670b --- /dev/null +++ b/drivers/char/ipmi/ipmi_smic_sm.c @@ -0,0 +1,599 @@ +/* + * ipmi_smic_sm.c + * + * The state-machine driver for an IPMI SMIC driver + * + * It started as a copy of Corey Minyard's driver for the KSC interface + * and the kernel patch "mmcdev-patch-245" by HP + * + * modified by: Hannes Schulz + * ipmi@schwaar.com + * + * + * Corey Minyard's driver for the KSC interface has the following + * copyright notice: + * Copyright 2002 MontaVista Software Inc. + * + * the kernel patch "mmcdev-patch-245" by HP has the following + * copyright notice: + * (c) Copyright 2001 Grant Grundler (c) Copyright + * 2001 Hewlett-Packard Company + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include /* For printk. */ +#include +#include /* for completion codes */ +#include "ipmi_si_sm.h" + +#define IPMI_SMIC_VERSION "v33" + +/* smic_debug is a bit-field + * SMIC_DEBUG_ENABLE - turned on for now + * SMIC_DEBUG_MSG - commands and their responses + * SMIC_DEBUG_STATES - state machine +*/ +#define SMIC_DEBUG_STATES 4 +#define SMIC_DEBUG_MSG 2 +#define SMIC_DEBUG_ENABLE 1 + +static int smic_debug = 1; + +enum smic_states { + SMIC_IDLE, + SMIC_START_OP, + SMIC_OP_OK, + SMIC_WRITE_START, + SMIC_WRITE_NEXT, + SMIC_WRITE_END, + SMIC_WRITE2READ, + SMIC_READ_START, + SMIC_READ_NEXT, + SMIC_READ_END, + SMIC_HOSED +}; + +#define MAX_SMIC_READ_SIZE 80 +#define MAX_SMIC_WRITE_SIZE 80 +#define SMIC_MAX_ERROR_RETRIES 3 + +/* Timeouts in microseconds. */ +#define SMIC_RETRY_TIMEOUT 100000 + +/* SMIC Flags Register Bits */ +#define SMIC_RX_DATA_READY 0x80 +#define SMIC_TX_DATA_READY 0x40 +#define SMIC_SMI 0x10 +#define SMIC_EVM_DATA_AVAIL 0x08 +#define SMIC_SMS_DATA_AVAIL 0x04 +#define SMIC_FLAG_BSY 0x01 + +/* SMIC Error Codes */ +#define EC_NO_ERROR 0x00 +#define EC_ABORTED 0x01 +#define EC_ILLEGAL_CONTROL 0x02 +#define EC_NO_RESPONSE 0x03 +#define EC_ILLEGAL_COMMAND 0x04 +#define EC_BUFFER_FULL 0x05 + +struct si_sm_data +{ + enum smic_states state; + struct si_sm_io *io; + unsigned char write_data[MAX_SMIC_WRITE_SIZE]; + int write_pos; + int write_count; + int orig_write_count; + unsigned char read_data[MAX_SMIC_READ_SIZE]; + int read_pos; + int truncated; + unsigned int error_retries; + long smic_timeout; +}; + +static unsigned int init_smic_data (struct si_sm_data *smic, + struct si_sm_io *io) +{ + smic->state = SMIC_IDLE; + smic->io = io; + smic->write_pos = 0; + smic->write_count = 0; + smic->orig_write_count = 0; + smic->read_pos = 0; + smic->error_retries = 0; + smic->truncated = 0; + smic->smic_timeout = SMIC_RETRY_TIMEOUT; + + /* We use 3 bytes of I/O. */ + return 3; +} + +static int start_smic_transaction(struct si_sm_data *smic, + unsigned char *data, unsigned int size) +{ + unsigned int i; + + if ((size < 2) || (size > MAX_SMIC_WRITE_SIZE)) { + return -1; + } + if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) { + return -2; + } + if (smic_debug & SMIC_DEBUG_MSG) { + printk(KERN_INFO "start_smic_transaction -"); + for (i = 0; i < size; i ++) { + printk (" %02x", (unsigned char) (data [i])); + } + printk ("\n"); + } + smic->error_retries = 0; + memcpy(smic->write_data, data, size); + smic->write_count = size; + smic->orig_write_count = size; + smic->write_pos = 0; + smic->read_pos = 0; + smic->state = SMIC_START_OP; + smic->smic_timeout = SMIC_RETRY_TIMEOUT; + return 0; +} + +static int smic_get_result(struct si_sm_data *smic, + unsigned char *data, unsigned int length) +{ + int i; + + if (smic_debug & SMIC_DEBUG_MSG) { + printk (KERN_INFO "smic_get result -"); + for (i = 0; i < smic->read_pos; i ++) { + printk (" %02x", (smic->read_data [i])); + } + printk ("\n"); + } + if (length < smic->read_pos) { + smic->read_pos = length; + smic->truncated = 1; + } + memcpy(data, smic->read_data, smic->read_pos); + + if ((length >= 3) && (smic->read_pos < 3)) { + data[2] = IPMI_ERR_UNSPECIFIED; + smic->read_pos = 3; + } + if (smic->truncated) { + data[2] = IPMI_ERR_MSG_TRUNCATED; + smic->truncated = 0; + } + return smic->read_pos; +} + +static inline unsigned char read_smic_flags(struct si_sm_data *smic) +{ + return smic->io->inputb(smic->io, 2); +} + +static inline unsigned char read_smic_status(struct si_sm_data *smic) +{ + return smic->io->inputb(smic->io, 1); +} + +static inline unsigned char read_smic_data(struct si_sm_data *smic) +{ + return smic->io->inputb(smic->io, 0); +} + +static inline void write_smic_flags(struct si_sm_data *smic, + unsigned char flags) +{ + smic->io->outputb(smic->io, 2, flags); +} + +static inline void write_smic_control(struct si_sm_data *smic, + unsigned char control) +{ + smic->io->outputb(smic->io, 1, control); +} + +static inline void write_si_sm_data (struct si_sm_data *smic, + unsigned char data) +{ + smic->io->outputb(smic->io, 0, data); +} + +static inline void start_error_recovery(struct si_sm_data *smic, char *reason) +{ + (smic->error_retries)++; + if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) { + if (smic_debug & SMIC_DEBUG_ENABLE) { + printk(KERN_WARNING + "ipmi_smic_drv: smic hosed: %s\n", reason); + } + smic->state = SMIC_HOSED; + } else { + smic->write_count = smic->orig_write_count; + smic->write_pos = 0; + smic->read_pos = 0; + smic->state = SMIC_START_OP; + smic->smic_timeout = SMIC_RETRY_TIMEOUT; + } +} + +static inline void write_next_byte(struct si_sm_data *smic) +{ + write_si_sm_data(smic, smic->write_data[smic->write_pos]); + (smic->write_pos)++; + (smic->write_count)--; +} + +static inline void read_next_byte (struct si_sm_data *smic) +{ + if (smic->read_pos >= MAX_SMIC_READ_SIZE) { + read_smic_data (smic); + smic->truncated = 1; + } else { + smic->read_data[smic->read_pos] = read_smic_data(smic); + (smic->read_pos)++; + } +} + +/* SMIC Control/Status Code Components */ +#define SMIC_GET_STATUS 0x00 /* Control form's name */ +#define SMIC_READY 0x00 /* Status form's name */ +#define SMIC_WR_START 0x01 /* Unified Control/Status names... */ +#define SMIC_WR_NEXT 0x02 +#define SMIC_WR_END 0x03 +#define SMIC_RD_START 0x04 +#define SMIC_RD_NEXT 0x05 +#define SMIC_RD_END 0x06 +#define SMIC_CODE_MASK 0x0f + +#define SMIC_CONTROL 0x00 +#define SMIC_STATUS 0x80 +#define SMIC_CS_MASK 0x80 + +#define SMIC_SMS 0x40 +#define SMIC_SMM 0x60 +#define SMIC_STREAM_MASK 0x60 + +/* SMIC Control Codes */ +#define SMIC_CC_SMS_GET_STATUS (SMIC_CONTROL|SMIC_SMS|SMIC_GET_STATUS) +#define SMIC_CC_SMS_WR_START (SMIC_CONTROL|SMIC_SMS|SMIC_WR_START) +#define SMIC_CC_SMS_WR_NEXT (SMIC_CONTROL|SMIC_SMS|SMIC_WR_NEXT) +#define SMIC_CC_SMS_WR_END (SMIC_CONTROL|SMIC_SMS|SMIC_WR_END) +#define SMIC_CC_SMS_RD_START (SMIC_CONTROL|SMIC_SMS|SMIC_RD_START) +#define SMIC_CC_SMS_RD_NEXT (SMIC_CONTROL|SMIC_SMS|SMIC_RD_NEXT) +#define SMIC_CC_SMS_RD_END (SMIC_CONTROL|SMIC_SMS|SMIC_RD_END) + +#define SMIC_CC_SMM_GET_STATUS (SMIC_CONTROL|SMIC_SMM|SMIC_GET_STATUS) +#define SMIC_CC_SMM_WR_START (SMIC_CONTROL|SMIC_SMM|SMIC_WR_START) +#define SMIC_CC_SMM_WR_NEXT (SMIC_CONTROL|SMIC_SMM|SMIC_WR_NEXT) +#define SMIC_CC_SMM_WR_END (SMIC_CONTROL|SMIC_SMM|SMIC_WR_END) +#define SMIC_CC_SMM_RD_START (SMIC_CONTROL|SMIC_SMM|SMIC_RD_START) +#define SMIC_CC_SMM_RD_NEXT (SMIC_CONTROL|SMIC_SMM|SMIC_RD_NEXT) +#define SMIC_CC_SMM_RD_END (SMIC_CONTROL|SMIC_SMM|SMIC_RD_END) + +/* SMIC Status Codes */ +#define SMIC_SC_SMS_READY (SMIC_STATUS|SMIC_SMS|SMIC_READY) +#define SMIC_SC_SMS_WR_START (SMIC_STATUS|SMIC_SMS|SMIC_WR_START) +#define SMIC_SC_SMS_WR_NEXT (SMIC_STATUS|SMIC_SMS|SMIC_WR_NEXT) +#define SMIC_SC_SMS_WR_END (SMIC_STATUS|SMIC_SMS|SMIC_WR_END) +#define SMIC_SC_SMS_RD_START (SMIC_STATUS|SMIC_SMS|SMIC_RD_START) +#define SMIC_SC_SMS_RD_NEXT (SMIC_STATUS|SMIC_SMS|SMIC_RD_NEXT) +#define SMIC_SC_SMS_RD_END (SMIC_STATUS|SMIC_SMS|SMIC_RD_END) + +#define SMIC_SC_SMM_READY (SMIC_STATUS|SMIC_SMM|SMIC_READY) +#define SMIC_SC_SMM_WR_START (SMIC_STATUS|SMIC_SMM|SMIC_WR_START) +#define SMIC_SC_SMM_WR_NEXT (SMIC_STATUS|SMIC_SMM|SMIC_WR_NEXT) +#define SMIC_SC_SMM_WR_END (SMIC_STATUS|SMIC_SMM|SMIC_WR_END) +#define SMIC_SC_SMM_RD_START (SMIC_STATUS|SMIC_SMM|SMIC_RD_START) +#define SMIC_SC_SMM_RD_NEXT (SMIC_STATUS|SMIC_SMM|SMIC_RD_NEXT) +#define SMIC_SC_SMM_RD_END (SMIC_STATUS|SMIC_SMM|SMIC_RD_END) + +/* these are the control/status codes we actually use + SMIC_CC_SMS_GET_STATUS 0x40 + SMIC_CC_SMS_WR_START 0x41 + SMIC_CC_SMS_WR_NEXT 0x42 + SMIC_CC_SMS_WR_END 0x43 + SMIC_CC_SMS_RD_START 0x44 + SMIC_CC_SMS_RD_NEXT 0x45 + SMIC_CC_SMS_RD_END 0x46 + + SMIC_SC_SMS_READY 0xC0 + SMIC_SC_SMS_WR_START 0xC1 + SMIC_SC_SMS_WR_NEXT 0xC2 + SMIC_SC_SMS_WR_END 0xC3 + SMIC_SC_SMS_RD_START 0xC4 + SMIC_SC_SMS_RD_NEXT 0xC5 + SMIC_SC_SMS_RD_END 0xC6 +*/ + +static enum si_sm_result smic_event (struct si_sm_data *smic, long time) +{ + unsigned char status; + unsigned char flags; + unsigned char data; + + if (smic->state == SMIC_HOSED) { + init_smic_data(smic, smic->io); + return SI_SM_HOSED; + } + if (smic->state != SMIC_IDLE) { + if (smic_debug & SMIC_DEBUG_STATES) { + printk(KERN_INFO + "smic_event - smic->smic_timeout = %ld," + " time = %ld\n", + smic->smic_timeout, time); + } +/* FIXME: smic_event is sometimes called with time > SMIC_RETRY_TIMEOUT */ + if (time < SMIC_RETRY_TIMEOUT) { + smic->smic_timeout -= time; + if (smic->smic_timeout < 0) { + start_error_recovery(smic, "smic timed out."); + return SI_SM_CALL_WITH_DELAY; + } + } + } + flags = read_smic_flags(smic); + if (flags & SMIC_FLAG_BSY) + return SI_SM_CALL_WITH_DELAY; + + status = read_smic_status (smic); + if (smic_debug & SMIC_DEBUG_STATES) + printk(KERN_INFO + "smic_event - state = %d, flags = 0x%02x," + " status = 0x%02x\n", + smic->state, flags, status); + + switch (smic->state) { + case SMIC_IDLE: + /* in IDLE we check for available messages */ + if (flags & (SMIC_SMI | + SMIC_EVM_DATA_AVAIL | SMIC_SMS_DATA_AVAIL)) + { + return SI_SM_ATTN; + } + return SI_SM_IDLE; + + case SMIC_START_OP: + /* sanity check whether smic is really idle */ + write_smic_control(smic, SMIC_CC_SMS_GET_STATUS); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_OP_OK; + break; + + case SMIC_OP_OK: + if (status != SMIC_SC_SMS_READY) { + /* this should not happen */ + start_error_recovery(smic, + "state = SMIC_OP_OK," + " status != SMIC_SC_SMS_READY"); + return SI_SM_CALL_WITH_DELAY; + } + /* OK so far; smic is idle let us start ... */ + write_smic_control(smic, SMIC_CC_SMS_WR_START); + write_next_byte(smic); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_WRITE_START; + break; + + case SMIC_WRITE_START: + if (status != SMIC_SC_SMS_WR_START) { + start_error_recovery(smic, + "state = SMIC_WRITE_START, " + "status != SMIC_SC_SMS_WR_START"); + return SI_SM_CALL_WITH_DELAY; + } + /* we must not issue WR_(NEXT|END) unless + TX_DATA_READY is set */ + if (flags & SMIC_TX_DATA_READY) { + if (smic->write_count == 1) { + /* last byte */ + write_smic_control(smic, SMIC_CC_SMS_WR_END); + smic->state = SMIC_WRITE_END; + } else { + write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); + smic->state = SMIC_WRITE_NEXT; + } + write_next_byte(smic); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + } + else { + return SI_SM_CALL_WITH_DELAY; + } + break; + + case SMIC_WRITE_NEXT: + if (status != SMIC_SC_SMS_WR_NEXT) { + start_error_recovery(smic, + "state = SMIC_WRITE_NEXT, " + "status != SMIC_SC_SMS_WR_NEXT"); + return SI_SM_CALL_WITH_DELAY; + } + /* this is the same code as in SMIC_WRITE_START */ + if (flags & SMIC_TX_DATA_READY) { + if (smic->write_count == 1) { + write_smic_control(smic, SMIC_CC_SMS_WR_END); + smic->state = SMIC_WRITE_END; + } + else { + write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); + smic->state = SMIC_WRITE_NEXT; + } + write_next_byte(smic); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + } + else { + return SI_SM_CALL_WITH_DELAY; + } + break; + + case SMIC_WRITE_END: + if (status != SMIC_SC_SMS_WR_END) { + start_error_recovery (smic, + "state = SMIC_WRITE_END, " + "status != SMIC_SC_SMS_WR_END"); + return SI_SM_CALL_WITH_DELAY; + } + /* data register holds an error code */ + data = read_smic_data(smic); + if (data != 0) { + if (smic_debug & SMIC_DEBUG_ENABLE) { + printk(KERN_INFO + "SMIC_WRITE_END: data = %02x\n", data); + } + start_error_recovery(smic, + "state = SMIC_WRITE_END, " + "data != SUCCESS"); + return SI_SM_CALL_WITH_DELAY; + } else { + smic->state = SMIC_WRITE2READ; + } + break; + + case SMIC_WRITE2READ: + /* we must wait for RX_DATA_READY to be set before we + can continue */ + if (flags & SMIC_RX_DATA_READY) { + write_smic_control(smic, SMIC_CC_SMS_RD_START); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_READ_START; + } else { + return SI_SM_CALL_WITH_DELAY; + } + break; + + case SMIC_READ_START: + if (status != SMIC_SC_SMS_RD_START) { + start_error_recovery(smic, + "state = SMIC_READ_START, " + "status != SMIC_SC_SMS_RD_START"); + return SI_SM_CALL_WITH_DELAY; + } + if (flags & SMIC_RX_DATA_READY) { + read_next_byte(smic); + write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_READ_NEXT; + } else { + return SI_SM_CALL_WITH_DELAY; + } + break; + + case SMIC_READ_NEXT: + switch (status) { + /* smic tells us that this is the last byte to be read + --> clean up */ + case SMIC_SC_SMS_RD_END: + read_next_byte(smic); + write_smic_control(smic, SMIC_CC_SMS_RD_END); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_READ_END; + break; + case SMIC_SC_SMS_RD_NEXT: + if (flags & SMIC_RX_DATA_READY) { + read_next_byte(smic); + write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); + write_smic_flags(smic, flags | SMIC_FLAG_BSY); + smic->state = SMIC_READ_NEXT; + } else { + return SI_SM_CALL_WITH_DELAY; + } + break; + default: + start_error_recovery( + smic, + "state = SMIC_READ_NEXT, " + "status != SMIC_SC_SMS_RD_(NEXT|END)"); + return SI_SM_CALL_WITH_DELAY; + } + break; + + case SMIC_READ_END: + if (status != SMIC_SC_SMS_READY) { + start_error_recovery(smic, + "state = SMIC_READ_END, " + "status != SMIC_SC_SMS_READY"); + return SI_SM_CALL_WITH_DELAY; + } + data = read_smic_data(smic); + /* data register holds an error code */ + if (data != 0) { + if (smic_debug & SMIC_DEBUG_ENABLE) { + printk(KERN_INFO + "SMIC_READ_END: data = %02x\n", data); + } + start_error_recovery(smic, + "state = SMIC_READ_END, " + "data != SUCCESS"); + return SI_SM_CALL_WITH_DELAY; + } else { + smic->state = SMIC_IDLE; + return SI_SM_TRANSACTION_COMPLETE; + } + + case SMIC_HOSED: + init_smic_data(smic, smic->io); + return SI_SM_HOSED; + + default: + if (smic_debug & SMIC_DEBUG_ENABLE) { + printk(KERN_WARNING "smic->state = %d\n", smic->state); + start_error_recovery(smic, "state = UNKNOWN"); + return SI_SM_CALL_WITH_DELAY; + } + } + smic->smic_timeout = SMIC_RETRY_TIMEOUT; + return SI_SM_CALL_WITHOUT_DELAY; +} + +static int smic_detect(struct si_sm_data *smic) +{ + /* It's impossible for the SMIC fnags register to be all 1's, + (assuming a properly functioning, self-initialized BMC) + but that's what you get from reading a bogus address, so we + test that first. */ + if (read_smic_flags(smic) == 0xff) + return 1; + + return 0; +} + +static void smic_cleanup(struct si_sm_data *kcs) +{ +} + +static int smic_size(void) +{ + return sizeof(struct si_sm_data); +} + +struct si_sm_handlers smic_smi_handlers = +{ + .version = IPMI_SMIC_VERSION, + .init_data = init_smic_data, + .start_transaction = start_smic_transaction, + .get_result = smic_get_result, + .event = smic_event, + .detect = smic_detect, + .cleanup = smic_cleanup, + .size = smic_size, +}; diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c new file mode 100644 index 000000000000..fd7093879c66 --- /dev/null +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -0,0 +1,1068 @@ +/* + * ipmi_watchdog.c + * + * A watchdog timer based upon the IPMI interface. + * + * Author: MontaVista Software, Inc. + * Corey Minyard + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_X86_LOCAL_APIC +#include +#endif + +#define PFX "IPMI Watchdog: " + +#define IPMI_WATCHDOG_VERSION "v33" + +/* + * The IPMI command/response information for the watchdog timer. + */ + +/* values for byte 1 of the set command, byte 2 of the get response. */ +#define WDOG_DONT_LOG (1 << 7) +#define WDOG_DONT_STOP_ON_SET (1 << 6) +#define WDOG_SET_TIMER_USE(byte, use) \ + byte = ((byte) & 0xf8) | ((use) & 0x7) +#define WDOG_GET_TIMER_USE(byte) ((byte) & 0x7) +#define WDOG_TIMER_USE_BIOS_FRB2 1 +#define WDOG_TIMER_USE_BIOS_POST 2 +#define WDOG_TIMER_USE_OS_LOAD 3 +#define WDOG_TIMER_USE_SMS_OS 4 +#define WDOG_TIMER_USE_OEM 5 + +/* values for byte 2 of the set command, byte 3 of the get response. */ +#define WDOG_SET_PRETIMEOUT_ACT(byte, use) \ + byte = ((byte) & 0x8f) | (((use) & 0x7) << 4) +#define WDOG_GET_PRETIMEOUT_ACT(byte) (((byte) >> 4) & 0x7) +#define WDOG_PRETIMEOUT_NONE 0 +#define WDOG_PRETIMEOUT_SMI 1 +#define WDOG_PRETIMEOUT_NMI 2 +#define WDOG_PRETIMEOUT_MSG_INT 3 + +/* Operations that can be performed on a pretimout. */ +#define WDOG_PREOP_NONE 0 +#define WDOG_PREOP_PANIC 1 +#define WDOG_PREOP_GIVE_DATA 2 /* Cause data to be available to + read. Doesn't work in NMI + mode. */ + +/* Actions to perform on a full timeout. */ +#define WDOG_SET_TIMEOUT_ACT(byte, use) \ + byte = ((byte) & 0xf8) | ((use) & 0x7) +#define WDOG_GET_TIMEOUT_ACT(byte) ((byte) & 0x7) +#define WDOG_TIMEOUT_NONE 0 +#define WDOG_TIMEOUT_RESET 1 +#define WDOG_TIMEOUT_POWER_DOWN 2 +#define WDOG_TIMEOUT_POWER_CYCLE 3 + +/* Byte 3 of the get command, byte 4 of the get response is the + pre-timeout in seconds. */ + +/* Bits for setting byte 4 of the set command, byte 5 of the get response. */ +#define WDOG_EXPIRE_CLEAR_BIOS_FRB2 (1 << 1) +#define WDOG_EXPIRE_CLEAR_BIOS_POST (1 << 2) +#define WDOG_EXPIRE_CLEAR_OS_LOAD (1 << 3) +#define WDOG_EXPIRE_CLEAR_SMS_OS (1 << 4) +#define WDOG_EXPIRE_CLEAR_OEM (1 << 5) + +/* Setting/getting the watchdog timer value. This is for bytes 5 and + 6 (the timeout time) of the set command, and bytes 6 and 7 (the + timeout time) and 8 and 9 (the current countdown value) of the + response. The timeout value is given in seconds (in the command it + is 100ms intervals). */ +#define WDOG_SET_TIMEOUT(byte1, byte2, val) \ + (byte1) = (((val) * 10) & 0xff), (byte2) = (((val) * 10) >> 8) +#define WDOG_GET_TIMEOUT(byte1, byte2) \ + (((byte1) | ((byte2) << 8)) / 10) + +#define IPMI_WDOG_RESET_TIMER 0x22 +#define IPMI_WDOG_SET_TIMER 0x24 +#define IPMI_WDOG_GET_TIMER 0x25 + +/* These are here until the real ones get into the watchdog.h interface. */ +#ifndef WDIOC_GETTIMEOUT +#define WDIOC_GETTIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 20, int) +#endif +#ifndef WDIOC_SET_PRETIMEOUT +#define WDIOC_SET_PRETIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 21, int) +#endif +#ifndef WDIOC_GET_PRETIMEOUT +#define WDIOC_GET_PRETIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 22, int) +#endif + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout; +#endif + +static ipmi_user_t watchdog_user = NULL; + +/* Default the timeout to 10 seconds. */ +static int timeout = 10; + +/* The pre-timeout is disabled by default. */ +static int pretimeout = 0; + +/* Default action is to reset the board on a timeout. */ +static unsigned char action_val = WDOG_TIMEOUT_RESET; + +static char action[16] = "reset"; + +static unsigned char preaction_val = WDOG_PRETIMEOUT_NONE; + +static char preaction[16] = "pre_none"; + +static unsigned char preop_val = WDOG_PREOP_NONE; + +static char preop[16] = "preop_none"; +static DEFINE_SPINLOCK(ipmi_read_lock); +static char data_to_read = 0; +static DECLARE_WAIT_QUEUE_HEAD(read_q); +static struct fasync_struct *fasync_q = NULL; +static char pretimeout_since_last_heartbeat = 0; +static char expect_close; + +/* If true, the driver will start running as soon as it is configured + and ready. */ +static int start_now = 0; + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Timeout value in seconds."); +module_param(pretimeout, int, 0); +MODULE_PARM_DESC(pretimeout, "Pretimeout value in seconds."); +module_param_string(action, action, sizeof(action), 0); +MODULE_PARM_DESC(action, "Timeout action. One of: " + "reset, none, power_cycle, power_off."); +module_param_string(preaction, preaction, sizeof(preaction), 0); +MODULE_PARM_DESC(preaction, "Pretimeout action. One of: " + "pre_none, pre_smi, pre_nmi, pre_int."); +module_param_string(preop, preop, sizeof(preop), 0); +MODULE_PARM_DESC(preop, "Pretimeout driver operation. One of: " + "preop_none, preop_panic, preop_give_data."); +module_param(start_now, int, 0); +MODULE_PARM_DESC(start_now, "Set to 1 to start the watchdog as" + "soon as the driver is loaded."); +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + +/* Default state of the timer. */ +static unsigned char ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + +/* If shutting down via IPMI, we ignore the heartbeat. */ +static int ipmi_ignore_heartbeat = 0; + +/* Is someone using the watchdog? Only one user is allowed. */ +static unsigned long ipmi_wdog_open = 0; + +/* If set to 1, the heartbeat command will set the state to reset and + start the timer. The timer doesn't normally run when the driver is + first opened until the heartbeat is set the first time, this + variable is used to accomplish this. */ +static int ipmi_start_timer_on_heartbeat = 0; + +/* IPMI version of the BMC. */ +static unsigned char ipmi_version_major; +static unsigned char ipmi_version_minor; + + +static int ipmi_heartbeat(void); +static void panic_halt_ipmi_heartbeat(void); + + +/* We use a semaphore to make sure that only one thing can send a set + timeout at one time, because we only have one copy of the data. + The semaphore is claimed when the set_timeout is sent and freed + when both messages are free. */ +static atomic_t set_timeout_tofree = ATOMIC_INIT(0); +static DECLARE_MUTEX(set_timeout_lock); +static void set_timeout_free_smi(struct ipmi_smi_msg *msg) +{ + if (atomic_dec_and_test(&set_timeout_tofree)) + up(&set_timeout_lock); +} +static void set_timeout_free_recv(struct ipmi_recv_msg *msg) +{ + if (atomic_dec_and_test(&set_timeout_tofree)) + up(&set_timeout_lock); +} +static struct ipmi_smi_msg set_timeout_smi_msg = +{ + .done = set_timeout_free_smi +}; +static struct ipmi_recv_msg set_timeout_recv_msg = +{ + .done = set_timeout_free_recv +}; + +static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg, + struct ipmi_recv_msg *recv_msg, + int *send_heartbeat_now) +{ + struct kernel_ipmi_msg msg; + unsigned char data[6]; + int rv; + struct ipmi_system_interface_addr addr; + int hbnow = 0; + + + data[0] = 0; + WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS); + + if ((ipmi_version_major > 1) + || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) + { + /* This is an IPMI 1.5-only feature. */ + data[0] |= WDOG_DONT_STOP_ON_SET; + } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { + /* In ipmi 1.0, setting the timer stops the watchdog, we + need to start it back up again. */ + hbnow = 1; + } + + data[1] = 0; + WDOG_SET_TIMEOUT_ACT(data[1], ipmi_watchdog_state); + if (pretimeout > 0) { + WDOG_SET_PRETIMEOUT_ACT(data[1], preaction_val); + data[2] = pretimeout; + } else { + WDOG_SET_PRETIMEOUT_ACT(data[1], WDOG_PRETIMEOUT_NONE); + data[2] = 0; /* No pretimeout. */ + } + data[3] = 0; + WDOG_SET_TIMEOUT(data[4], data[5], timeout); + + addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + addr.channel = IPMI_BMC_CHANNEL; + addr.lun = 0; + + msg.netfn = 0x06; + msg.cmd = IPMI_WDOG_SET_TIMER; + msg.data = data; + msg.data_len = sizeof(data); + rv = ipmi_request_supply_msgs(watchdog_user, + (struct ipmi_addr *) &addr, + 0, + &msg, + NULL, + smi_msg, + recv_msg, + 1); + if (rv) { + printk(KERN_WARNING PFX "set timeout error: %d\n", + rv); + } + + if (send_heartbeat_now) + *send_heartbeat_now = hbnow; + + return rv; +} + +/* Parameters to ipmi_set_timeout */ +#define IPMI_SET_TIMEOUT_NO_HB 0 +#define IPMI_SET_TIMEOUT_HB_IF_NECESSARY 1 +#define IPMI_SET_TIMEOUT_FORCE_HB 2 + +static int ipmi_set_timeout(int do_heartbeat) +{ + int send_heartbeat_now; + int rv; + + + /* We can only send one of these at a time. */ + down(&set_timeout_lock); + + atomic_set(&set_timeout_tofree, 2); + + rv = i_ipmi_set_timeout(&set_timeout_smi_msg, + &set_timeout_recv_msg, + &send_heartbeat_now); + if (rv) { + up(&set_timeout_lock); + } else { + if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB) + || ((send_heartbeat_now) + && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY))) + { + rv = ipmi_heartbeat(); + } + } + + return rv; +} + +static void dummy_smi_free(struct ipmi_smi_msg *msg) +{ +} +static void dummy_recv_free(struct ipmi_recv_msg *msg) +{ +} +static struct ipmi_smi_msg panic_halt_smi_msg = +{ + .done = dummy_smi_free +}; +static struct ipmi_recv_msg panic_halt_recv_msg = +{ + .done = dummy_recv_free +}; + +/* Special call, doesn't claim any locks. This is only to be called + at panic or halt time, in run-to-completion mode, when the caller + is the only CPU and the only thing that will be going is these IPMI + calls. */ +static void panic_halt_ipmi_set_timeout(void) +{ + int send_heartbeat_now; + int rv; + + rv = i_ipmi_set_timeout(&panic_halt_smi_msg, + &panic_halt_recv_msg, + &send_heartbeat_now); + if (!rv) { + if (send_heartbeat_now) + panic_halt_ipmi_heartbeat(); + } +} + +/* We use a semaphore to make sure that only one thing can send a + heartbeat at one time, because we only have one copy of the data. + The semaphore is claimed when the set_timeout is sent and freed + when both messages are free. */ +static atomic_t heartbeat_tofree = ATOMIC_INIT(0); +static DECLARE_MUTEX(heartbeat_lock); +static DECLARE_MUTEX_LOCKED(heartbeat_wait_lock); +static void heartbeat_free_smi(struct ipmi_smi_msg *msg) +{ + if (atomic_dec_and_test(&heartbeat_tofree)) + up(&heartbeat_wait_lock); +} +static void heartbeat_free_recv(struct ipmi_recv_msg *msg) +{ + if (atomic_dec_and_test(&heartbeat_tofree)) + up(&heartbeat_wait_lock); +} +static struct ipmi_smi_msg heartbeat_smi_msg = +{ + .done = heartbeat_free_smi +}; +static struct ipmi_recv_msg heartbeat_recv_msg = +{ + .done = heartbeat_free_recv +}; + +static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = +{ + .done = dummy_smi_free +}; +static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = +{ + .done = dummy_recv_free +}; + +static int ipmi_heartbeat(void) +{ + struct kernel_ipmi_msg msg; + int rv; + struct ipmi_system_interface_addr addr; + + if (ipmi_ignore_heartbeat) { + return 0; + } + + if (ipmi_start_timer_on_heartbeat) { + ipmi_start_timer_on_heartbeat = 0; + ipmi_watchdog_state = action_val; + return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + } else if (pretimeout_since_last_heartbeat) { + /* A pretimeout occurred, make sure we set the timeout. + We don't want to set the action, though, we want to + leave that alone (thus it can't be combined with the + above operation. */ + pretimeout_since_last_heartbeat = 0; + return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); + } + + down(&heartbeat_lock); + + atomic_set(&heartbeat_tofree, 2); + + /* Don't reset the timer if we have the timer turned off, that + re-enables the watchdog. */ + if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) { + up(&heartbeat_lock); + return 0; + } + + addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + addr.channel = IPMI_BMC_CHANNEL; + addr.lun = 0; + + msg.netfn = 0x06; + msg.cmd = IPMI_WDOG_RESET_TIMER; + msg.data = NULL; + msg.data_len = 0; + rv = ipmi_request_supply_msgs(watchdog_user, + (struct ipmi_addr *) &addr, + 0, + &msg, + NULL, + &heartbeat_smi_msg, + &heartbeat_recv_msg, + 1); + if (rv) { + up(&heartbeat_lock); + printk(KERN_WARNING PFX "heartbeat failure: %d\n", + rv); + return rv; + } + + /* Wait for the heartbeat to be sent. */ + down(&heartbeat_wait_lock); + + if (heartbeat_recv_msg.msg.data[0] != 0) { + /* Got an error in the heartbeat response. It was already + reported in ipmi_wdog_msg_handler, but we should return + an error here. */ + rv = -EINVAL; + } + + up(&heartbeat_lock); + + return rv; +} + +static void panic_halt_ipmi_heartbeat(void) +{ + struct kernel_ipmi_msg msg; + struct ipmi_system_interface_addr addr; + + + /* Don't reset the timer if we have the timer turned off, that + re-enables the watchdog. */ + if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) + return; + + addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + addr.channel = IPMI_BMC_CHANNEL; + addr.lun = 0; + + msg.netfn = 0x06; + msg.cmd = IPMI_WDOG_RESET_TIMER; + msg.data = NULL; + msg.data_len = 0; + ipmi_request_supply_msgs(watchdog_user, + (struct ipmi_addr *) &addr, + 0, + &msg, + NULL, + &panic_halt_heartbeat_smi_msg, + &panic_halt_heartbeat_recv_msg, + 1); +} + +static struct watchdog_info ident= +{ + .options = 0, /* WDIOF_SETTIMEOUT, */ + .firmware_version = 1, + .identity = "IPMI" +}; + +static int ipmi_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int i; + int val; + + switch(cmd) { + case WDIOC_GETSUPPORT: + i = copy_to_user(argp, &ident, sizeof(ident)); + return i ? -EFAULT : 0; + + case WDIOC_SETTIMEOUT: + i = copy_from_user(&val, argp, sizeof(int)); + if (i) + return -EFAULT; + timeout = val; + return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); + + case WDIOC_GETTIMEOUT: + i = copy_to_user(argp, &timeout, sizeof(timeout)); + if (i) + return -EFAULT; + return 0; + + case WDIOC_SET_PRETIMEOUT: + i = copy_from_user(&val, argp, sizeof(int)); + if (i) + return -EFAULT; + pretimeout = val; + return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); + + case WDIOC_GET_PRETIMEOUT: + i = copy_to_user(argp, &pretimeout, sizeof(pretimeout)); + if (i) + return -EFAULT; + return 0; + + case WDIOC_KEEPALIVE: + return ipmi_heartbeat(); + + case WDIOC_SETOPTIONS: + i = copy_from_user(&val, argp, sizeof(int)); + if (i) + return -EFAULT; + if (val & WDIOS_DISABLECARD) + { + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + ipmi_start_timer_on_heartbeat = 0; + } + + if (val & WDIOS_ENABLECARD) + { + ipmi_watchdog_state = action_val; + ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + } + return 0; + + case WDIOC_GETSTATUS: + val = 0; + i = copy_to_user(argp, &val, sizeof(val)); + if (i) + return -EFAULT; + return 0; + + default: + return -ENOIOCTLCMD; + } +} + +static ssize_t ipmi_write(struct file *file, + const char __user *buf, + size_t len, + loff_t *ppos) +{ + int rv; + + if (len) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + rv = ipmi_heartbeat(); + if (rv) + return rv; + return 1; + } + return 0; +} + +static ssize_t ipmi_read(struct file *file, + char __user *buf, + size_t count, + loff_t *ppos) +{ + int rv = 0; + wait_queue_t wait; + + if (count <= 0) + return 0; + + /* Reading returns if the pretimeout has gone off, and it only does + it once per pretimeout. */ + spin_lock(&ipmi_read_lock); + if (!data_to_read) { + if (file->f_flags & O_NONBLOCK) { + rv = -EAGAIN; + goto out; + } + + init_waitqueue_entry(&wait, current); + add_wait_queue(&read_q, &wait); + while (!data_to_read) { + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock(&ipmi_read_lock); + schedule(); + spin_lock(&ipmi_read_lock); + } + remove_wait_queue(&read_q, &wait); + + if (signal_pending(current)) { + rv = -ERESTARTSYS; + goto out; + } + } + data_to_read = 0; + + out: + spin_unlock(&ipmi_read_lock); + + if (rv == 0) { + if (copy_to_user(buf, &data_to_read, 1)) + rv = -EFAULT; + else + rv = 1; + } + + return rv; +} + +static int ipmi_open(struct inode *ino, struct file *filep) +{ + switch (iminor(ino)) + { + case WATCHDOG_MINOR: + if(test_and_set_bit(0, &ipmi_wdog_open)) + return -EBUSY; + + /* Don't start the timer now, let it start on the + first heartbeat. */ + ipmi_start_timer_on_heartbeat = 1; + return nonseekable_open(ino, filep); + + default: + return (-ENODEV); + } +} + +static unsigned int ipmi_poll(struct file *file, poll_table *wait) +{ + unsigned int mask = 0; + + poll_wait(file, &read_q, wait); + + spin_lock(&ipmi_read_lock); + if (data_to_read) + mask |= (POLLIN | POLLRDNORM); + spin_unlock(&ipmi_read_lock); + + return mask; +} + +static int ipmi_fasync(int fd, struct file *file, int on) +{ + int result; + + result = fasync_helper(fd, file, on, &fasync_q); + + return (result); +} + +static int ipmi_close(struct inode *ino, struct file *filep) +{ + if (iminor(ino)==WATCHDOG_MINOR) + { + if (expect_close == 42) { + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + clear_bit(0, &ipmi_wdog_open); + } else { + printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + ipmi_heartbeat(); + } + } + + ipmi_fasync (-1, filep, 0); + expect_close = 0; + + return 0; +} + +static struct file_operations ipmi_wdog_fops = { + .owner = THIS_MODULE, + .read = ipmi_read, + .poll = ipmi_poll, + .write = ipmi_write, + .ioctl = ipmi_ioctl, + .open = ipmi_open, + .release = ipmi_close, + .fasync = ipmi_fasync, +}; + +static struct miscdevice ipmi_wdog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ipmi_wdog_fops +}; + +static DECLARE_RWSEM(register_sem); + +static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg, + void *handler_data) +{ + if (msg->msg.data[0] != 0) { + printk(KERN_ERR PFX "response: Error %x on cmd %x\n", + msg->msg.data[0], + msg->msg.cmd); + } + + ipmi_free_recv_msg(msg); +} + +static void ipmi_wdog_pretimeout_handler(void *handler_data) +{ + if (preaction_val != WDOG_PRETIMEOUT_NONE) { + if (preop_val == WDOG_PREOP_PANIC) + panic("Watchdog pre-timeout"); + else if (preop_val == WDOG_PREOP_GIVE_DATA) { + spin_lock(&ipmi_read_lock); + data_to_read = 1; + wake_up_interruptible(&read_q); + kill_fasync(&fasync_q, SIGIO, POLL_IN); + + spin_unlock(&ipmi_read_lock); + } + } + + /* On some machines, the heartbeat will give + an error and not work unless we re-enable + the timer. So do so. */ + pretimeout_since_last_heartbeat = 1; +} + +static struct ipmi_user_hndl ipmi_hndlrs = +{ + .ipmi_recv_hndl = ipmi_wdog_msg_handler, + .ipmi_watchdog_pretimeout = ipmi_wdog_pretimeout_handler +}; + +static void ipmi_register_watchdog(int ipmi_intf) +{ + int rv = -EBUSY; + + down_write(®ister_sem); + if (watchdog_user) + goto out; + + rv = ipmi_create_user(ipmi_intf, &ipmi_hndlrs, NULL, &watchdog_user); + if (rv < 0) { + printk(KERN_CRIT PFX "Unable to register with ipmi\n"); + goto out; + } + + ipmi_get_version(watchdog_user, + &ipmi_version_major, + &ipmi_version_minor); + + rv = misc_register(&ipmi_wdog_miscdev); + if (rv < 0) { + ipmi_destroy_user(watchdog_user); + watchdog_user = NULL; + printk(KERN_CRIT PFX "Unable to register misc device\n"); + } + + out: + up_write(®ister_sem); + + if ((start_now) && (rv == 0)) { + /* Run from startup, so start the timer now. */ + start_now = 0; /* Disable this function after first startup. */ + ipmi_watchdog_state = action_val; + ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + printk(KERN_INFO PFX "Starting now!\n"); + } +} + +#ifdef HAVE_NMI_HANDLER +static int +ipmi_nmi(void *dev_id, struct pt_regs *regs, int cpu, int handled) +{ + /* If no one else handled the NMI, we assume it was the IPMI + watchdog. */ + if ((!handled) && (preop_val == WDOG_PREOP_PANIC)) + panic(PFX "pre-timeout"); + + /* On some machines, the heartbeat will give + an error and not work unless we re-enable + the timer. So do so. */ + pretimeout_since_last_heartbeat = 1; + + return NOTIFY_DONE; +} + +static struct nmi_handler ipmi_nmi_handler = +{ + .link = LIST_HEAD_INIT(ipmi_nmi_handler.link), + .dev_name = "ipmi_watchdog", + .dev_id = NULL, + .handler = ipmi_nmi, + .priority = 0, /* Call us last. */ +}; +#endif + +static int wdog_reboot_handler(struct notifier_block *this, + unsigned long code, + void *unused) +{ + static int reboot_event_handled = 0; + + if ((watchdog_user) && (!reboot_event_handled)) { + /* Make sure we only do this once. */ + reboot_event_handled = 1; + + if (code == SYS_DOWN || code == SYS_HALT) { + /* Disable the WDT if we are shutting down. */ + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + panic_halt_ipmi_set_timeout(); + } else { + /* Set a long timer to let the reboot happens, but + reboot if it hangs. */ + timeout = 120; + pretimeout = 0; + ipmi_watchdog_state = WDOG_TIMEOUT_RESET; + panic_halt_ipmi_set_timeout(); + } + } + return NOTIFY_OK; +} + +static struct notifier_block wdog_reboot_notifier = { + .notifier_call = wdog_reboot_handler, + .next = NULL, + .priority = 0 +}; + +static int wdog_panic_handler(struct notifier_block *this, + unsigned long event, + void *unused) +{ + static int panic_event_handled = 0; + + /* On a panic, if we have a panic timeout, make sure that the thing + reboots, even if it hangs during that panic. */ + if (watchdog_user && !panic_event_handled) { + /* Make sure the panic doesn't hang, and make sure we + do this only once. */ + panic_event_handled = 1; + + timeout = 255; + pretimeout = 0; + ipmi_watchdog_state = WDOG_TIMEOUT_RESET; + panic_halt_ipmi_set_timeout(); + } + + return NOTIFY_OK; +} + +static struct notifier_block wdog_panic_notifier = { + .notifier_call = wdog_panic_handler, + .next = NULL, + .priority = 150 /* priority: INT_MAX >= x >= 0 */ +}; + + +static void ipmi_new_smi(int if_num) +{ + ipmi_register_watchdog(if_num); +} + +static void ipmi_smi_gone(int if_num) +{ + /* This can never be called, because once the watchdog is + registered, the interface can't go away until the watchdog + is unregistered. */ +} + +static struct ipmi_smi_watcher smi_watcher = +{ + .owner = THIS_MODULE, + .new_smi = ipmi_new_smi, + .smi_gone = ipmi_smi_gone +}; + +static int __init ipmi_wdog_init(void) +{ + int rv; + + printk(KERN_INFO PFX "driver version " + IPMI_WATCHDOG_VERSION "\n"); + + if (strcmp(action, "reset") == 0) { + action_val = WDOG_TIMEOUT_RESET; + } else if (strcmp(action, "none") == 0) { + action_val = WDOG_TIMEOUT_NONE; + } else if (strcmp(action, "power_cycle") == 0) { + action_val = WDOG_TIMEOUT_POWER_CYCLE; + } else if (strcmp(action, "power_off") == 0) { + action_val = WDOG_TIMEOUT_POWER_DOWN; + } else { + action_val = WDOG_TIMEOUT_RESET; + printk(KERN_INFO PFX "Unknown action '%s', defaulting to" + " reset\n", action); + } + + if (strcmp(preaction, "pre_none") == 0) { + preaction_val = WDOG_PRETIMEOUT_NONE; + } else if (strcmp(preaction, "pre_smi") == 0) { + preaction_val = WDOG_PRETIMEOUT_SMI; +#ifdef HAVE_NMI_HANDLER + } else if (strcmp(preaction, "pre_nmi") == 0) { + preaction_val = WDOG_PRETIMEOUT_NMI; +#endif + } else if (strcmp(preaction, "pre_int") == 0) { + preaction_val = WDOG_PRETIMEOUT_MSG_INT; + } else { + preaction_val = WDOG_PRETIMEOUT_NONE; + printk(KERN_INFO PFX "Unknown preaction '%s', defaulting to" + " none\n", preaction); + } + + if (strcmp(preop, "preop_none") == 0) { + preop_val = WDOG_PREOP_NONE; + } else if (strcmp(preop, "preop_panic") == 0) { + preop_val = WDOG_PREOP_PANIC; + } else if (strcmp(preop, "preop_give_data") == 0) { + preop_val = WDOG_PREOP_GIVE_DATA; + } else { + preop_val = WDOG_PREOP_NONE; + printk(KERN_INFO PFX "Unknown preop '%s', defaulting to" + " none\n", preop); + } + +#ifdef HAVE_NMI_HANDLER + if (preaction_val == WDOG_PRETIMEOUT_NMI) { + if (preop_val == WDOG_PREOP_GIVE_DATA) { + printk(KERN_WARNING PFX "Pretimeout op is to give data" + " but NMI pretimeout is enabled, setting" + " pretimeout op to none\n"); + preop_val = WDOG_PREOP_NONE; + } +#ifdef CONFIG_X86_LOCAL_APIC + if (nmi_watchdog == NMI_IO_APIC) { + printk(KERN_WARNING PFX "nmi_watchdog is set to IO APIC" + " mode (value is %d), that is incompatible" + " with using NMI in the IPMI watchdog." + " Disabling IPMI nmi pretimeout.\n", + nmi_watchdog); + preaction_val = WDOG_PRETIMEOUT_NONE; + } else { +#endif + rv = request_nmi(&ipmi_nmi_handler); + if (rv) { + printk(KERN_WARNING PFX "Can't register nmi handler\n"); + return rv; + } +#ifdef CONFIG_X86_LOCAL_APIC + } +#endif + } +#endif + + rv = ipmi_smi_watcher_register(&smi_watcher); + if (rv) { +#ifdef HAVE_NMI_HANDLER + if (preaction_val == WDOG_PRETIMEOUT_NMI) + release_nmi(&ipmi_nmi_handler); +#endif + printk(KERN_WARNING PFX "can't register smi watcher\n"); + return rv; + } + + register_reboot_notifier(&wdog_reboot_notifier); + notifier_chain_register(&panic_notifier_list, &wdog_panic_notifier); + + return 0; +} + +static __exit void ipmi_unregister_watchdog(void) +{ + int rv; + + down_write(®ister_sem); + +#ifdef HAVE_NMI_HANDLER + if (preaction_val == WDOG_PRETIMEOUT_NMI) + release_nmi(&ipmi_nmi_handler); +#endif + + notifier_chain_unregister(&panic_notifier_list, &wdog_panic_notifier); + unregister_reboot_notifier(&wdog_reboot_notifier); + + if (! watchdog_user) + goto out; + + /* Make sure no one can call us any more. */ + misc_deregister(&ipmi_wdog_miscdev); + + /* Wait to make sure the message makes it out. The lower layer has + pointers to our buffers, we want to make sure they are done before + we release our memory. */ + while (atomic_read(&set_timeout_tofree)) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + } + + /* Disconnect from IPMI. */ + rv = ipmi_destroy_user(watchdog_user); + if (rv) { + printk(KERN_WARNING PFX "error unlinking from IPMI: %d\n", + rv); + } + watchdog_user = NULL; + + out: + up_write(®ister_sem); +} + +static void __exit ipmi_wdog_exit(void) +{ + ipmi_smi_watcher_unregister(&smi_watcher); + ipmi_unregister_watchdog(); +} +module_exit(ipmi_wdog_exit); +module_init(ipmi_wdog_init); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-55-g7522