From 6b8cf7724bd0f8ae1f61937c5f40f4dbbda40960 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 May 2007 00:51:42 +0200 Subject: sis5513: PIO mode setup fixes * limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt to program PIO5 by config_art_rwp_pio() could result in incorrect PIO timings being programmed and possibly the data corruption (for < ATA100 family chipsets PIO0 timings were used, for ATA100 and ATA100a - the random content of test1 variable was used, for ATA133 - MWDMA0 timings were used) * BUG() in sis5513_tune_chipset() if somebody tries to force unsupported PIO5, also cleanup this function a bit while at it * add comment about PIO0 timings for < ATA100 family chipsets * remove open-coded best PIO mode selection from config_art_rwp_pio(), it contained numerous bugs: - it didn't check for validity of id->eide_pio_modes and id->eide_pio_iordy before using them - it tried to found out maximum PIO mode basing on minimum IORDY cycle time (moreover wrong cycle times were used for PIO1/5) - it was overriding PIO blacklist and conservative PIO "downgrade" done by ide_get_best_pio_mode() * use sis5513_tune_drive() instead of config_art_rwp_pio() in sis5513_config_xfer_rate() so the correct PIO mode is also set on drive even if the device is not IORDY/DMA capable * config_art_rwp_pio() was always setting the best possible mode and not the wanted one - fix it and move ide_get_best_pio_mode() call to config_chipset_for_pio() * don't use ide_find_best_mode() in config_chipset_for_pio(), it was being overriden by config_art_rwp_pio() for the host timings anyway + we need to set the same PIO mode on the device and the host * pass correct "pio" argument (255 instead of 5) to sis5513_tune_drive() call in sis5513_config_xfer_rate() so the best PIO mode is set on the drive and not PIO4 * rename sis5513_tune_drive() to sis5513_tuneproc() and config_chipset_for_pio() to sis5513_tune_driver() * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sis5513.c | 85 ++++++++++++++++++++--------------------------- 1 file changed, 36 insertions(+), 49 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 2bde1b92784a..bb6cc4aedd63 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -1,9 +1,11 @@ /* - * linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003 + * linux/drivers/ide/pci/sis5513.c Version 0.20 Mar 4, 2007 * * Copyright (C) 1999-2000 Andre Hedrick * Copyright (C) 2002 Lionel Bouton , Maintainer * Copyright (C) 2003 Vojtech Pavlik + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * * May be copied or modified under the terms of the GNU General Public License * * @@ -448,36 +450,15 @@ static void config_drive_art_rwp (ide_drive_t *drive) pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch); } - /* Set per-drive active and recovery time */ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u8 timing, drive_pci, test1, test2; - - u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90}; - u16 xfer_pio = drive->id->eide_pio_modes; + u8 drive_pci, test1, test2; config_drive_art_rwp(drive); - pio = ide_get_best_pio_mode(drive, 255, pio, NULL); - - if (xfer_pio> 4) - xfer_pio = 0; - - if (drive->id->eide_pio_iordy > 0) { - for (xfer_pio = 5; - (xfer_pio > 0) && - (drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]); - xfer_pio--); - } else { - xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 : - (drive->id->eide_pio_modes & 2) ? 0x04 : - (drive->id->eide_pio_modes & 1) ? 0x03 : xfer_pio; - } - - timing = (xfer_pio >= pio) ? xfer_pio : pio; /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */ drive_pci = 0x40; @@ -500,17 +481,18 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) test1 &= ~0x0F; test2 &= ~0x07; - switch(timing) { + switch(pio) { case 4: test1 |= 0x01; test2 |= 0x03; break; case 3: test1 |= 0x03; test2 |= 0x03; break; case 2: test1 |= 0x04; test2 |= 0x04; break; case 1: test1 |= 0x07; test2 |= 0x06; break; + case 0: /* PIO0: register setting == X000 */ default: break; } pci_write_config_byte(dev, drive_pci, test1); pci_write_config_byte(dev, drive_pci+1, test2); } else if (chipset_family < ATA_133) { - switch(timing) { /* active recovery + switch(pio) { /* active recovery v v */ case 4: test1 = 0x30|0x01; break; case 3: test1 = 0x30|0x03; break; @@ -525,24 +507,28 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) pci_read_config_dword(dev, drive_pci, &test3); test3 &= 0xc0c00fff; if (test3 & 0x08) { - test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12; - test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16; - test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24; + test3 |= ini_time_value[ATA_133][pio] << 12; + test3 |= act_time_value[ATA_133][pio] << 16; + test3 |= rco_time_value[ATA_133][pio] << 24; } else { - test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12; - test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16; - test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24; + test3 |= ini_time_value[ATA_100][pio] << 12; + test3 |= act_time_value[ATA_100][pio] << 16; + test3 |= rco_time_value[ATA_100][pio] << 24; } pci_write_config_dword(dev, drive_pci, test3); } } -static int config_chipset_for_pio (ide_drive_t *drive, u8 pio) +static int sis5513_tune_drive(ide_drive_t *drive, u8 pio) { - if (pio == 255) - pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0; + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); config_art_rwp_pio(drive, pio); - return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4)); + return ide_config_drive_speed(drive, XFER_PIO_0 + pio); +} + +static void sis5513_tuneproc(ide_drive_t *drive, u8 pio) +{ + (void)sis5513_tune_drive(drive, pio); } static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) @@ -622,25 +608,26 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) case XFER_SW_DMA_1: case XFER_SW_DMA_0: break; - case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4)); - case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3)); - case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2)); - case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1)); + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: case XFER_PIO_0: - default: return((int) config_chipset_for_pio(drive, 0)); + return sis5513_tune_drive(drive, speed - XFER_PIO_0); + default: + BUG(); + break; } - return ((int) ide_config_drive_speed(drive, speed)); -} - -static void sis5513_tune_drive (ide_drive_t *drive, u8 pio) -{ - (void) config_chipset_for_pio(drive, pio); + return ide_config_drive_speed(drive, speed); } static int sis5513_config_xfer_rate(ide_drive_t *drive) { - config_art_rwp_pio(drive, 5); + /* + * TODO: always set PIO mode and remove this + */ + sis5513_tuneproc(drive, 255); drive->init_speed = 0; @@ -648,7 +635,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive) return 0; if (ide_use_fast_pio(drive)) - sis5513_tune_drive(drive, 5); + sis5513_tuneproc(drive, 255); return -1; } @@ -836,7 +823,7 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) if (!hwif->irq) hwif->irq = hwif->channel ? 15 : 14; - hwif->tuneproc = &sis5513_tune_drive; + hwif->tuneproc = &sis5513_tuneproc; hwif->speedproc = &sis5513_tune_chipset; if (!(hwif->dma_base)) { -- cgit v1.2.3-55-g7522