From 63c3ecd946d4ae2879ec0d8c6dcb90132a74d831 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 4 Apr 2017 14:08:19 +0200 Subject: iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC The Qualcomm PM8xxx PMICs contain a simpler ADC than its successors (already in the kernel as qcom-spmi-vadc.c): the HK/XO ADC (Housekeeping/Chrystal oscillator ADC). As far as I can understand this is equal to the PMICs using SSBI transport and encompass PM8018, PM8038, PM8058, and PM8921, so this is shortly named PM8xxx. This ADC monitors a bunch of on-board voltages and the die temperature of the PMIC itself, but it can also be routed to convert a few external MPPs (multi-purpose pins). On the APQ8060 DragonBoard this feature is used to let this ADC convert an analog ALS (Ambient Light Sensor) voltage signal from a Capella CM3605 ALS into a LUX value. Developed and tested with APQ8060 DragonBoard based on Ivan's driver and Rama Krishna's patches. The SPMI VADC driver is quite different, but share enough minor functionality that I have split out to the common file in a previous patch. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: Ivan T. Ivanov Cc: Andy Gross Cc: Bjorn Andersson Cc: Stephen Boyd Cc: Srinivas Kandagatla Cc: Rama Krishna Phani A Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/qcom-pm8xxx-xoadc.c | 1036 +++++++++++++++++++++++++++++++++++ 3 files changed, 1048 insertions(+) create mode 100644 drivers/iio/adc/qcom-pm8xxx-xoadc.c (limited to 'drivers/iio') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index d8ad694b4709..385fb732dade 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -499,6 +499,17 @@ config PALMAS_GPADC config QCOM_VADC_COMMON tristate +config QCOM_PM8XXX_XOADC + tristate "Qualcomm SSBI PM8xxx PMIC XOADCs" + depends on MFD_PM8XXX + select QCOM_VADC_COMMON + help + ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs + using SSBI transport: PM8018, PM8038, PM8058, PM8921. + + To compile this driver as a module, choose M here: the module + will be called qcom-pm8xxx-xoadc. + config QCOM_SPMI_IADC tristate "Qualcomm SPMI PMIC current ADC" depends on SPMI diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 50fb66b47f7e..78a7fd84cc59 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o +obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_SPEAR_ADC) += spear_adc.o diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c new file mode 100644 index 000000000000..cea8f1fb444a --- /dev/null +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -0,0 +1,1036 @@ +/* + * Qualcomm PM8xxx PMIC XOADC driver + * + * These ADCs are known as HK/XO (house keeping / chrystal oscillator) + * "XO" in "XOADC" means Chrystal Oscillator. It's a bunch of + * specific-purpose and general purpose ADC converters and channels. + * + * Copyright (C) 2017 Linaro Ltd. + * Author: Linus Walleij + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "qcom-vadc-common.h" + +/* + * Definitions for the "user processor" registers lifted from the v3.4 + * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC: + * drivers/misc/pmic8058-xoadc.c + * drivers/hwmon/pm8xxx-adc.c + * None of them contain any complete register specification, so this is + * a best effort of combining the information. + */ + +/* These appear to be "battery monitor" registers */ +#define ADC_ARB_BTM_CNTRL1 0x17e +#define ADC_ARB_BTM_CNTRL1_EN_BTM BIT(0) +#define ADC_ARB_BTM_CNTRL1_SEL_OP_MODE BIT(1) +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL1 BIT(2) +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL2 BIT(3) +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL3 BIT(4) +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL4 BIT(5) +#define ADC_ARB_BTM_CNTRL1_EOC BIT(6) +#define ADC_ARB_BTM_CNTRL1_REQ BIT(7) + +#define ADC_ARB_BTM_AMUX_CNTRL 0x17f +#define ADC_ARB_BTM_ANA_PARAM 0x180 +#define ADC_ARB_BTM_DIG_PARAM 0x181 +#define ADC_ARB_BTM_RSV 0x182 +#define ADC_ARB_BTM_DATA1 0x183 +#define ADC_ARB_BTM_DATA0 0x184 +#define ADC_ARB_BTM_BAT_COOL_THR1 0x185 +#define ADC_ARB_BTM_BAT_COOL_THR0 0x186 +#define ADC_ARB_BTM_BAT_WARM_THR1 0x187 +#define ADC_ARB_BTM_BAT_WARM_THR0 0x188 +#define ADC_ARB_BTM_CNTRL2 0x18c + +/* Proper ADC registers */ + +#define ADC_ARB_USRP_CNTRL 0x197 +#define ADC_ARB_USRP_CNTRL_EN_ARB BIT(0) +#define ADC_ARB_USRP_CNTRL_RSV1 BIT(1) +#define ADC_ARB_USRP_CNTRL_RSV2 BIT(2) +#define ADC_ARB_USRP_CNTRL_RSV3 BIT(3) +#define ADC_ARB_USRP_CNTRL_RSV4 BIT(4) +#define ADC_ARB_USRP_CNTRL_RSV5 BIT(5) +#define ADC_ARB_USRP_CNTRL_EOC BIT(6) +#define ADC_ARB_USRP_CNTRL_REQ BIT(7) + +#define ADC_ARB_USRP_AMUX_CNTRL 0x198 +/* + * The channel mask includes the bits selecting channel mux and prescaler + * on PM8058, or channel mux and premux on PM8921. + */ +#define ADC_ARB_USRP_AMUX_CNTRL_CHAN_MASK 0xfc +#define ADC_ARB_USRP_AMUX_CNTRL_RSV0 BIT(0) +#define ADC_ARB_USRP_AMUX_CNTRL_RSV1 BIT(1) +/* On PM8058 this is prescaling, on PM8921 this is premux */ +#define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX0 BIT(2) +#define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX1 BIT(3) +#define ADC_ARB_USRP_AMUX_CNTRL_SEL0 BIT(4) +#define ADC_ARB_USRP_AMUX_CNTRL_SEL1 BIT(5) +#define ADC_ARB_USRP_AMUX_CNTRL_SEL2 BIT(6) +#define ADC_ARB_USRP_AMUX_CNTRL_SEL3 BIT(7) +#define ADC_AMUX_PREMUX_SHIFT 2 +#define ADC_AMUX_SEL_SHIFT 4 + +/* We know very little about the bits in this register */ +#define ADC_ARB_USRP_ANA_PARAM 0x199 +#define ADC_ARB_USRP_ANA_PARAM_DIS 0xFE +#define ADC_ARB_USRP_ANA_PARAM_EN 0xFF + +#define ADC_ARB_USRP_DIG_PARAM 0x19A +#define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 BIT(0) +#define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 BIT(1) +#define ADC_ARB_USRP_DIG_PARAM_CLK_RATE0 BIT(2) +#define ADC_ARB_USRP_DIG_PARAM_CLK_RATE1 BIT(3) +#define ADC_ARB_USRP_DIG_PARAM_EOC BIT(4) +/* + * On a later ADC the decimation factors are defined as + * 00 = 512, 01 = 1024, 10 = 2048, 11 = 4096 so assume this + * holds also for this older XOADC. + */ +#define ADC_ARB_USRP_DIG_PARAM_DEC_RATE0 BIT(5) +#define ADC_ARB_USRP_DIG_PARAM_DEC_RATE1 BIT(6) +#define ADC_ARB_USRP_DIG_PARAM_EN BIT(7) +#define ADC_DIG_PARAM_DEC_SHIFT 5 + +#define ADC_ARB_USRP_RSV 0x19B +#define ADC_ARB_USRP_RSV_RST BIT(0) +#define ADC_ARB_USRP_RSV_DTEST0 BIT(1) +#define ADC_ARB_USRP_RSV_DTEST1 BIT(2) +#define ADC_ARB_USRP_RSV_OP BIT(3) +#define ADC_ARB_USRP_RSV_IP_SEL0 BIT(4) +#define ADC_ARB_USRP_RSV_IP_SEL1 BIT(5) +#define ADC_ARB_USRP_RSV_IP_SEL2 BIT(6) +#define ADC_ARB_USRP_RSV_TRM BIT(7) +#define ADC_RSV_IP_SEL_SHIFT 4 + +#define ADC_ARB_USRP_DATA0 0x19D +#define ADC_ARB_USRP_DATA1 0x19C + +/** + * Physical channels which MUST exist on all PM variants in order to provide + * proper reference points for calibration. + * + * @PM8XXX_CHANNEL_INTERNAL: 625mV reference channel + * @PM8XXX_CHANNEL_125V: 1250mV reference channel + * @PM8XXX_CHANNEL_INTERNAL_2: 325mV reference channel + * @PM8XXX_CHANNEL_MUXOFF: channel to reduce input load on mux, apparently also + * measures XO temperature + */ +#define PM8XXX_CHANNEL_INTERNAL 0x0c +#define PM8XXX_CHANNEL_125V 0x0d +#define PM8XXX_CHANNEL_INTERNAL_2 0x0e +#define PM8XXX_CHANNEL_MUXOFF 0x0f + +/* + * PM8058 AMUX premux scaling, two bits. This is done of the channel before + * reaching the AMUX. + */ +#define PM8058_AMUX_PRESCALE_0 0x0 /* No scaling on the signal */ +#define PM8058_AMUX_PRESCALE_1 0x1 /* Unity scaling selected by the user */ +#define PM8058_AMUX_PRESCALE_1_DIV3 0x2 /* 1/3 prescaler on the input */ + +/* Defines reference voltage for the XOADC */ +#define AMUX_RSV0 0x0 /* XO_IN/XOADC_GND, special selection to read XO temp */ +#define AMUX_RSV1 0x1 /* PMIC_IN/XOADC_GND */ +#define AMUX_RSV2 0x2 /* PMIC_IN/BMS_CSP */ +#define AMUX_RSV3 0x3 /* not used */ +#define AMUX_RSV4 0x4 /* XOADC_GND/XOADC_GND */ +#define AMUX_RSV5 0x5 /* XOADC_VREF/XOADC_GND */ +#define XOADC_RSV_MAX 5 /* 3 bits 0..7, 3 and 6,7 are invalid */ + +/** + * struct xoadc_channel - encodes channel properties and defaults + * @datasheet_name: the hardwarename of this channel + * @pre_scale_mux: prescale (PM8058) or premux (PM8921) for selecting + * this channel. Both this and the amux channel is needed to uniquely + * identify a channel. Values 0..3. + * @amux_channel: value of the ADC_ARB_USRP_AMUX_CNTRL register for this + * channel, bits 4..7, selects the amux, values 0..f + * @prescale: the channels have hard-coded prescale ratios defined + * by the hardware, this tells us what it is + * @type: corresponding IIO channel type, usually IIO_VOLTAGE or + * IIO_TEMP + * @scale_fn_type: the liner interpolation etc to convert the + * ADC code to the value that IIO expects, in uV or millicelsius + * etc. This scale function can be pretty elaborate if different + * thermistors are connected or other hardware characteristics are + * deployed. + * @amux_ip_rsv: ratiometric scale value used by the analog muxer: this + * selects the reference voltage for ratiometric scaling + */ +struct xoadc_channel { + const char *datasheet_name; + u8 pre_scale_mux:2; + u8 amux_channel:4; + const struct vadc_prescale_ratio prescale; + enum iio_chan_type type; + enum vadc_scale_fn_type scale_fn_type; + u8 amux_ip_rsv:3; +}; + +/** + * struct xoadc_variant - encodes the XOADC variant characteristics + * @name: name of this PMIC variant + * @channels: the hardware channels and respective settings and defaults + * @broken_ratiometric: if the PMIC has broken ratiometric scaling (this + * is a known problem on PM8058) + * @prescaling: this variant uses AMUX bits 2 & 3 for prescaling (PM8058) + * @second_level_mux: this variant uses AMUX bits 2 & 3 for a second level + * mux + */ +struct xoadc_variant { + const char name[16]; + const struct xoadc_channel *channels; + bool broken_ratiometric; + bool prescaling; + bool second_level_mux; +}; + +/* + * XOADC_CHAN macro parameters: + * _dname: the name of the channel + * _presmux: prescaler (PM8058) or premux (PM8921) setting for this channel + * _amux: the value in bits 2..7 of the ADC_ARB_USRP_AMUX_CNTRL register + * for this channel. On some PMICs some of the bits select a prescaler, and + * on some PMICs some of the bits select various complex multiplex settings. + * _type: IIO channel type + * _prenum: prescaler numerator (dividend) + * _preden: prescaler denominator (divisor) + * _scale: scaling function type, this selects how the raw valued is mangled + * to output the actual processed measurement + * _amip: analog mux input parent when using ratiometric measurements + */ +#define XOADC_CHAN(_dname, _presmux, _amux, _type, _prenum, _preden, _scale, _amip) \ + { \ + .datasheet_name = __stringify(_dname), \ + .pre_scale_mux = _presmux, \ + .amux_channel = _amux, \ + .prescale = { .num = _prenum, .den = _preden }, \ + .type = _type, \ + .scale_fn_type = _scale, \ + .amux_ip_rsv = _amip, \ + } + +/* + * Taken from arch/arm/mach-msm/board-9615.c in the vendor tree: + * TODO: incomplete, needs testing. + */ +static const struct xoadc_channel pm8018_xoadc_channels[] = { + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VPH_PWR, 0x00, 0x02, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), + /* Used for battery ID or battery temperature */ + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV2), + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), + { }, /* Sentinel */ +}; + +/* + * Taken from arch/arm/mach-msm/board-8930-pmic.c in the vendor tree: + * TODO: needs testing. + */ +static const struct xoadc_channel pm8038_xoadc_channels[] = { + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* AMUX8 used for battery temperature in most cases */ + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV2), + XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), + { }, /* Sentinel */ +}; + +/* + * This was created by cross-referencing the vendor tree + * arch/arm/mach-msm/board-msm8x60.c msm_adc_channels_data[] + * with the "channel types" (first field) to find the right + * configuration for these channels on an MSM8x60 i.e. PM8058 + * setup. + */ +static const struct xoadc_channel pm8058_xoadc_channels[] = { + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 10, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + /* + * AMUX channels 5 thru 9 are referred to as MPP5 thru MPP9 in + * some code and documentation. But they are really just 5 + * channels just like any other. They are connected to a switching + * matrix where they can be routed to any of the MPPs, not just + * 1-to-1 onto MPP5 thru 9, so naming them MPP5 thru MPP9 is + * very confusing. + */ + XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), + /* There are also "unity" and divided by 3 channels (prescaler) but noone is using them */ + { }, /* Sentinel */ +}; + +/* + * The PM8921 has some pre-muxing on its channels, this comes from the vendor tree + * include/linux/mfd/pm8xxx/pm8xxx-adc.h + * board-flo-pmic.c (Nexus 7) and board-8064-pmic.c + */ +static const struct xoadc_channel pm8921_xoadc_channels[] = { + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), + /* channel "ICHG" is reserved and not used on PM8921 */ + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(IBAT, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* CHAN 6 & 7 (MPP1 & MPP2) are reserved for MPP channels on PM8921 */ + XOADC_CHAN(BATT_THERM, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV1), + XOADC_CHAN(BATT_ID, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* FIXME: look into the scaling of this temperature */ + XOADC_CHAN(CHG_TEMP, 0x00, 0x0e, IIO_TEMP, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), + /* The following channels have premux bit 0 set to 1 (all end in 4) */ + XOADC_CHAN(ATEST_8, 0x01, 0x00, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* Set scaling to 1/2 based on the name for these two */ + XOADC_CHAN(USB_SNS_DIV20, 0x01, 0x01, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN_SNS_DIV20, 0x01, 0x02, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX3, 0x01, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX4, 0x01, 0x04, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX5, 0x01, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX6, 0x01, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX7, 0x01, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX8, 0x01, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* Internal test signals, I think */ + XOADC_CHAN(ATEST_1, 0x01, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_2, 0x01, 0x0a, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_3, 0x01, 0x0b, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_4, 0x01, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_5, 0x01, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_6, 0x01, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_7, 0x01, 0x0f, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* The following channels have premux bit 1 set to 1 (all end in 8) */ + /* I guess even ATEST8 will be divided by 3 here */ + XOADC_CHAN(ATEST_8, 0x02, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + /* I guess div 2 div 3 becomes div 6 */ + XOADC_CHAN(USB_SNS_DIV20_DIV3, 0x02, 0x01, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN_SNS_DIV20_DIV3, 0x02, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX3_DIV3, 0x02, 0x03, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX4_DIV3, 0x02, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX5_DIV3, 0x02, 0x05, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX6_DIV3, 0x02, 0x06, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX7_DIV3, 0x02, 0x07, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX8_DIV3, 0x02, 0x08, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_1_DIV3, 0x02, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_2_DIV3, 0x02, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_3_DIV3, 0x02, 0x0b, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_4_DIV3, 0x02, 0x0c, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_5_DIV3, 0x02, 0x0d, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_6_DIV3, 0x02, 0x0e, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_7_DIV3, 0x02, 0x0f, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + { }, /* Sentinel */ +}; + +/** + * struct pm8xxx_chan_info - ADC channel information + * @name: name of this channel + * @hwchan: pointer to hardware channel information (muxing & scaling settings) + * @calibration: whether to use absolute or ratiometric calibration + * @scale_fn_type: scaling function type + * @decimation: 0,1,2,3 + * @amux_ip_rsv: ratiometric scale value if using ratiometric + * calibration: 0, 1, 2, 4, 5. + */ +struct pm8xxx_chan_info { + const char *name; + const struct xoadc_channel *hwchan; + enum vadc_calibration calibration; + u8 decimation:2; + u8 amux_ip_rsv:3; +}; + +/** + * struct pm8xxx_xoadc - state container for the XOADC + * @dev: pointer to device + * @map: regmap to access registers + * @vref: reference voltage regulator + * characteristics of the channels, and sensible default settings + * @nchans: number of channels, configured by the device tree + * @chans: the channel information per-channel, configured by the device tree + * @iio_chans: IIO channel specifiers + * @graph: linear calibration parameters for absolute and + * ratiometric measurements + * @complete: completion to indicate end of conversion + * @lock: lock to restrict access to the hardware to one client at the time + */ +struct pm8xxx_xoadc { + struct device *dev; + struct regmap *map; + const struct xoadc_variant *variant; + struct regulator *vref; + unsigned int nchans; + struct pm8xxx_chan_info *chans; + struct iio_chan_spec *iio_chans; + struct vadc_linear_graph graph[2]; + struct completion complete; + struct mutex lock; +}; + +static irqreturn_t pm8xxx_eoc_irq(int irq, void *d) +{ + struct iio_dev *indio_dev = d; + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); + + complete(&adc->complete); + + return IRQ_HANDLED; +} + +static struct pm8xxx_chan_info * +pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan) +{ + struct pm8xxx_chan_info *ch; + int i; + + for (i = 0; i < adc->nchans; i++) { + ch = &adc->chans[i]; + if (ch->hwchan->amux_channel == chan) + break; + } + if (i == adc->nchans) + return NULL; + + return ch; +} + +static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc, + const struct pm8xxx_chan_info *ch, + u8 rsv, u16 *adc_code, + bool force_ratiometric) +{ + int ret; + unsigned int val; + u8 rsvmask, rsvval; + u8 lsb, msb; + + dev_dbg(adc->dev, "read channel \"%s\", amux %d, prescale/mux: %d, rsv %d\n", + ch->name, ch->hwchan->amux_channel, ch->hwchan->pre_scale_mux, rsv); + + mutex_lock(&adc->lock); + + /* Mux in this channel */ + val = ch->hwchan->amux_channel << ADC_AMUX_SEL_SHIFT; + val |= ch->hwchan->pre_scale_mux << ADC_AMUX_PREMUX_SHIFT; + ret = regmap_write(adc->map, ADC_ARB_USRP_AMUX_CNTRL, val); + if (ret) + goto unlock; + + /* Set up ratiometric scale value, mask off all bits except these */ + rsvmask = (ADC_ARB_USRP_RSV_RST | ADC_ARB_USRP_RSV_DTEST0 | + ADC_ARB_USRP_RSV_DTEST1 | ADC_ARB_USRP_RSV_OP); + if (adc->variant->broken_ratiometric && !force_ratiometric) { + /* + * Apparently the PM8058 has some kind of bug which is + * reflected in the vendor tree drivers/misc/pmix8058-xoadc.c + * which just hardcodes the RSV selector to SEL1 (0x20) for + * most cases and SEL0 (0x10) for the MUXOFF channel only. + * If we force ratiometric (currently only done when attempting + * to do ratiometric calibration) this doesn't seem to work + * very well and I suspect ratiometric conversion is simply + * broken or not supported on the PM8058. + * + * Maybe IO_SEL2 doesn't exist on PM8058 and bits 4 & 5 select + * the mode alone. + * + * Some PM8058 register documentation would be nice to get + * this right. + */ + if (ch->hwchan->amux_channel == PM8XXX_CHANNEL_MUXOFF) + rsvval = ADC_ARB_USRP_RSV_IP_SEL0; + else + rsvval = ADC_ARB_USRP_RSV_IP_SEL1; + } else { + if (rsv == 0xff) + rsvval = (ch->amux_ip_rsv << ADC_RSV_IP_SEL_SHIFT) | + ADC_ARB_USRP_RSV_TRM; + else + rsvval = (rsv << ADC_RSV_IP_SEL_SHIFT) | + ADC_ARB_USRP_RSV_TRM; + } + + ret = regmap_update_bits(adc->map, + ADC_ARB_USRP_RSV, + ~rsvmask, + rsvval); + if (ret) + goto unlock; + + ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM, + ADC_ARB_USRP_ANA_PARAM_DIS); + if (ret) + goto unlock; + + /* Decimation factor */ + ret = regmap_write(adc->map, ADC_ARB_USRP_DIG_PARAM, + ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 | + ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 | + ch->decimation << ADC_DIG_PARAM_DEC_SHIFT); + if (ret) + goto unlock; + + ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM, + ADC_ARB_USRP_ANA_PARAM_EN); + if (ret) + goto unlock; + + /* Enable the arbiter, the Qualcomm code does it twice like this */ + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, + ADC_ARB_USRP_CNTRL_EN_ARB); + if (ret) + goto unlock; + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, + ADC_ARB_USRP_CNTRL_EN_ARB); + if (ret) + goto unlock; + + + /* Fire a request! */ + reinit_completion(&adc->complete); + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, + ADC_ARB_USRP_CNTRL_EN_ARB | + ADC_ARB_USRP_CNTRL_REQ); + if (ret) + goto unlock; + + /* Next the interrupt occurs */ + ret = wait_for_completion_timeout(&adc->complete, + VADC_CONV_TIME_MAX_US); + if (!ret) { + dev_err(adc->dev, "conversion timed out\n"); + ret = -ETIMEDOUT; + goto unlock; + } + + ret = regmap_read(adc->map, ADC_ARB_USRP_DATA0, &val); + if (ret) + goto unlock; + lsb = val; + ret = regmap_read(adc->map, ADC_ARB_USRP_DATA1, &val); + if (ret) + goto unlock; + msb = val; + *adc_code = (msb << 8) | lsb; + + /* Turn off the ADC by setting the arbiter to 0 twice */ + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0); + if (ret) + goto unlock; + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0); + if (ret) + goto unlock; + +unlock: + mutex_unlock(&adc->lock); + return ret; +} + +static int pm8xxx_read_channel(struct pm8xxx_xoadc *adc, + const struct pm8xxx_chan_info *ch, + u16 *adc_code) +{ + /* + * Normally we just use the ratiometric scale value (RSV) predefined + * for the channel, but during calibration we need to modify this + * so this wrapper is a helper hiding the more complex version. + */ + return pm8xxx_read_channel_rsv(adc, ch, 0xff, adc_code, false); +} + +static int pm8xxx_calibrate_device(struct pm8xxx_xoadc *adc) +{ + const struct pm8xxx_chan_info *ch; + u16 read_1250v; + u16 read_0625v; + u16 read_nomux_rsv5; + u16 read_nomux_rsv4; + int ret; + + adc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV; + adc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE; + + /* Common reference channel calibration */ + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V); + if (!ch) + return -ENODEV; + ret = pm8xxx_read_channel(adc, ch, &read_1250v); + if (ret) { + dev_err(adc->dev, "could not read 1.25V reference channel\n"); + return -ENODEV; + } + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL); + if (!ch) + return -ENODEV; + ret = pm8xxx_read_channel(adc, ch, &read_0625v); + if (ret) { + dev_err(adc->dev, "could not read 0.625V reference channel\n"); + return -ENODEV; + } + if (read_1250v == read_0625v) { + dev_err(adc->dev, "read same ADC code for 1.25V and 0.625V\n"); + return -ENODEV; + } + + adc->graph[VADC_CALIB_ABSOLUTE].dy = read_1250v - read_0625v; + adc->graph[VADC_CALIB_ABSOLUTE].gnd = read_0625v; + + dev_info(adc->dev, "absolute calibration dx = %d uV, dy = %d units\n", + VADC_ABSOLUTE_RANGE_UV, adc->graph[VADC_CALIB_ABSOLUTE].dy); + + /* Ratiometric calibration */ + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF); + if (!ch) + return -ENODEV; + ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV5, + &read_nomux_rsv5, true); + if (ret) { + dev_err(adc->dev, "could not read MUXOFF reference channel\n"); + return -ENODEV; + } + ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4, + &read_nomux_rsv4, true); + if (ret) { + dev_err(adc->dev, "could not read MUXOFF reference channel\n"); + return -ENODEV; + } + adc->graph[VADC_CALIB_RATIOMETRIC].dy = + read_nomux_rsv5 - read_nomux_rsv4; + adc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_nomux_rsv4; + + dev_info(adc->dev, "ratiometric calibration dx = %d, dy = %d units\n", + VADC_RATIOMETRIC_RANGE, + adc->graph[VADC_CALIB_RATIOMETRIC].dy); + + return 0; +} + +static int pm8xxx_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); + const struct pm8xxx_chan_info *ch; + u16 adc_code; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + ch = pm8xxx_get_channel(adc, chan->address); + if (!ch) { + dev_err(adc->dev, "no such channel %lu\n", + chan->address); + return -EINVAL; + } + ret = pm8xxx_read_channel(adc, ch, &adc_code); + if (ret) + return ret; + + ret = qcom_vadc_scale(ch->hwchan->scale_fn_type, + &adc->graph[ch->calibration], + &ch->hwchan->prescale, + (ch->calibration == VADC_CALIB_ABSOLUTE), + adc_code, val); + if (ret) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_RAW: + ch = pm8xxx_get_channel(adc, chan->address); + if (!ch) { + dev_err(adc->dev, "no such channel %lu\n", + chan->address); + return -EINVAL; + } + ret = pm8xxx_read_channel(adc, ch, &adc_code); + if (ret) + return ret; + + *val = (int)adc_code; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int pm8xxx_of_xlate(struct iio_dev *indio_dev, + const struct of_phandle_args *iiospec) +{ + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); + u8 pre_scale_mux; + u8 amux_channel; + unsigned int i; + + /* + * First cell is prescaler or premux, second cell is analog + * mux. + */ + if (iiospec->args_count != 2) { + dev_err(&indio_dev->dev, "wrong number of arguments for %s need 2 got %d\n", + iiospec->np->name, + iiospec->args_count); + return -EINVAL; + } + pre_scale_mux = (u8)iiospec->args[0]; + amux_channel = (u8)iiospec->args[1]; + dev_dbg(&indio_dev->dev, "pre scale/mux: %02x, amux: %02x\n", + pre_scale_mux, amux_channel); + + /* We need to match exactly on the prescale/premux and channel */ + for (i = 0; i < adc->nchans; i++) + if (adc->chans[i].hwchan->pre_scale_mux == pre_scale_mux && + adc->chans[i].hwchan->amux_channel == amux_channel) + return i; + + return -EINVAL; +} + +static const struct iio_info pm8xxx_xoadc_info = { + .driver_module = THIS_MODULE, + .of_xlate = pm8xxx_of_xlate, + .read_raw = pm8xxx_read_raw, +}; + +static int pm8xxx_xoadc_parse_channel(struct device *dev, + struct device_node *np, + const struct xoadc_channel *hw_channels, + struct iio_chan_spec *iio_chan, + struct pm8xxx_chan_info *ch) +{ + const char *name = np->name; + const struct xoadc_channel *hwchan; + u32 pre_scale_mux, amux_channel; + u32 rsv, dec; + int ret; + int chid; + + ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux); + if (ret) { + dev_err(dev, "invalid pre scale/mux number %s\n", name); + return ret; + } + ret = of_property_read_u32_index(np, "reg", 1, &amux_channel); + if (ret) { + dev_err(dev, "invalid amux channel number %s\n", name); + return ret; + } + + /* Find the right channel setting */ + chid = 0; + hwchan = &hw_channels[0]; + while (hwchan && hwchan->datasheet_name) { + if (hwchan->pre_scale_mux == pre_scale_mux && + hwchan->amux_channel == amux_channel) + break; + hwchan++; + chid++; + } + /* The sentinel does not have a name assigned */ + if (!hwchan->datasheet_name) { + dev_err(dev, "could not locate channel %02x/%02x\n", + pre_scale_mux, amux_channel); + return -EINVAL; + } + ch->name = name; + ch->hwchan = hwchan; + /* Everyone seems to use absolute calibration except in special cases */ + ch->calibration = VADC_CALIB_ABSOLUTE; + /* Everyone seems to use default ("type 2") decimation */ + ch->decimation = VADC_DEF_DECIMATION; + + if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) { + ch->calibration = VADC_CALIB_RATIOMETRIC; + if (rsv > XOADC_RSV_MAX) { + dev_err(dev, "%s too large RSV value %d\n", name, rsv); + return -EINVAL; + } + if (rsv == AMUX_RSV3) { + dev_err(dev, "%s invalid RSV value %d\n", name, rsv); + return -EINVAL; + } + } + + /* Optional decimation, if omitted we use the default */ + ret = of_property_read_u32(np, "qcom,decimation", &dec); + if (!ret) { + ret = qcom_vadc_decimation_from_dt(dec); + if (ret < 0) { + dev_err(dev, "%s invalid decimation %d\n", + name, dec); + return ret; + } + ch->decimation = ret; + } + + iio_chan->channel = chid; + iio_chan->address = hwchan->amux_channel; + iio_chan->datasheet_name = hwchan->datasheet_name; + iio_chan->type = hwchan->type; + /* All channels are raw or processed */ + iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_PROCESSED); + iio_chan->indexed = 1; + + dev_dbg(dev, "channel [PRESCALE/MUX: %02x AMUX: %02x] \"%s\" " + "ref voltage: %d, decimation %d " + "prescale %d/%d, scale function %d\n", + hwchan->pre_scale_mux, hwchan->amux_channel, ch->name, + ch->amux_ip_rsv, ch->decimation, hwchan->prescale.num, + hwchan->prescale.den, hwchan->scale_fn_type); + + return 0; +} + +static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc, + struct device_node *np) +{ + struct device_node *child; + struct pm8xxx_chan_info *ch; + int ret; + int i; + + adc->nchans = of_get_available_child_count(np); + if (!adc->nchans) { + dev_err(adc->dev, "no channel children\n"); + return -ENODEV; + } + dev_dbg(adc->dev, "found %d ADC channels\n", adc->nchans); + + adc->iio_chans = devm_kcalloc(adc->dev, adc->nchans, + sizeof(*adc->iio_chans), GFP_KERNEL); + if (!adc->iio_chans) + return -ENOMEM; + + adc->chans = devm_kcalloc(adc->dev, adc->nchans, + sizeof(*adc->chans), GFP_KERNEL); + if (!adc->chans) + return -ENOMEM; + + i = 0; + for_each_available_child_of_node(np, child) { + ch = &adc->chans[i]; + ret = pm8xxx_xoadc_parse_channel(adc->dev, child, + adc->variant->channels, + &adc->iio_chans[i], + ch); + if (ret) { + of_node_put(child); + return ret; + } + i++; + } + + /* Check for required channels */ + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V); + if (!ch) { + dev_err(adc->dev, "missing 1.25V reference channel\n"); + return -ENODEV; + } + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL); + if (!ch) { + dev_err(adc->dev, "missing 0.625V reference channel\n"); + return -ENODEV; + } + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF); + if (!ch) { + dev_err(adc->dev, "missing MUXOFF reference channel\n"); + return -ENODEV; + } + + return 0; +} + +static int pm8xxx_xoadc_probe(struct platform_device *pdev) +{ + const struct xoadc_variant *variant; + struct pm8xxx_xoadc *adc; + struct iio_dev *indio_dev; + struct device_node *np = pdev->dev.of_node; + struct regmap *map; + struct device *dev = &pdev->dev; + int ret; + + variant = of_device_get_match_data(dev); + if (!variant) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + platform_set_drvdata(pdev, indio_dev); + + adc = iio_priv(indio_dev); + adc->dev = dev; + adc->variant = variant; + init_completion(&adc->complete); + mutex_init(&adc->lock); + + ret = pm8xxx_xoadc_parse_channels(adc, np); + if (ret) + return ret; + + map = dev_get_regmap(dev->parent, NULL); + if (!map) { + dev_err(dev, "parent regmap unavailable.\n"); + return -ENXIO; + } + adc->map = map; + + /* Bring up regulator */ + adc->vref = devm_regulator_get(dev, "xoadc-ref"); + if (IS_ERR(adc->vref)) { + dev_err(dev, "failed to get XOADC VREF regulator\n"); + return PTR_ERR(adc->vref); + } + ret = regulator_enable(adc->vref); + if (ret) { + dev_err(dev, "failed to enable XOADC VREF regulator\n"); + return ret; + } + + ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0), + pm8xxx_eoc_irq, NULL, 0, variant->name, indio_dev); + if (ret) { + dev_err(dev, "unable to request IRQ\n"); + goto out_disable_vref; + } + + indio_dev->dev.parent = dev; + indio_dev->dev.of_node = np; + indio_dev->name = variant->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &pm8xxx_xoadc_info; + indio_dev->channels = adc->iio_chans; + indio_dev->num_channels = adc->nchans; + + ret = iio_device_register(indio_dev); + if (ret) + goto out_disable_vref; + + ret = pm8xxx_calibrate_device(adc); + if (ret) + goto out_unreg_device; + + dev_info(dev, "%s XOADC driver enabled\n", variant->name); + + return 0; + +out_unreg_device: + iio_device_unregister(indio_dev); +out_disable_vref: + regulator_disable(adc->vref); + + return ret; +} + +static int pm8xxx_xoadc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + regulator_disable(adc->vref); + + return 0; +} + +static const struct xoadc_variant pm8018_variant = { + .name = "PM8018-XOADC", + .channels = pm8018_xoadc_channels, +}; + +static const struct xoadc_variant pm8038_variant = { + .name = "PM8038-XOADC", + .channels = pm8038_xoadc_channels, +}; + +static const struct xoadc_variant pm8058_variant = { + .name = "PM8058-XOADC", + .channels = pm8058_xoadc_channels, + .broken_ratiometric = true, + .prescaling = true, +}; + +static const struct xoadc_variant pm8921_variant = { + .name = "PM8921-XOADC", + .channels = pm8921_xoadc_channels, + .second_level_mux = true, +}; + +static const struct of_device_id pm8xxx_xoadc_id_table[] = { + { + .compatible = "qcom,pm8018-adc", + .data = &pm8018_variant, + }, + { + .compatible = "qcom,pm8038-adc", + .data = &pm8038_variant, + }, + { + .compatible = "qcom,pm8058-adc", + .data = &pm8058_variant, + }, + { + .compatible = "qcom,pm8921-adc", + .data = &pm8921_variant, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, pm8xxx_xoadc_id_table); + +static struct platform_driver pm8xxx_xoadc_driver = { + .driver = { + .name = "pm8xxx-adc", + .of_match_table = pm8xxx_xoadc_id_table, + }, + .probe = pm8xxx_xoadc_probe, + .remove = pm8xxx_xoadc_remove, +}; +module_platform_driver(pm8xxx_xoadc_driver); + +MODULE_DESCRIPTION("PM8xxx XOADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:pm8xxx-xoadc"); -- cgit v1.2.3-55-g7522