From fb16aaf58cbe902585fc3a2ce40d74a2de384ac2 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 30 Dec 2015 14:42:05 -0200 Subject: [media] nuvoton-cir: fix setting ioport base address At least on Zotac CI321 ACPI provides an ioport range for the wake up part but accessing these ioports has no effect. Instead the ioport base address is set to another value already (0xa20 in my case) and accessing this ioport range works. Therefore set a new ioport base address only if the current ioport base address is 0 (register reset default). The need to use the existing base address instead of trying to set an own one doesn't seem to be limited to this specific device as other drivers like hwmon/nct6775 do it the same way. This change was successfully tested on the mentioned device. And the change should be generic enough to not break the driver for other chips (however due to lack of appropriate hardware I wasn't able to test this). [mchehab@osg.samsung.com: Tested on Intel NUC NUC5i7RYB with BIOS version RYBDWi35.86A.0350.2015.0812.1722] Signed-off-by: Heiner Kallweit Tested-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/nuvoton-cir.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers/media/rc/nuvoton-cir.c') diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index d396dcc11be5..5790ee46a38d 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -161,6 +161,22 @@ static u8 nvt_cir_wake_reg_read(struct nvt_dev *nvt, u8 offset) return val; } +/* don't override io address if one is set already */ +static void nvt_set_ioaddr(struct nvt_dev *nvt, unsigned long *ioaddr) +{ + unsigned long old_addr; + + old_addr = nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8; + old_addr |= nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO); + + if (old_addr) + *ioaddr = old_addr; + else { + nvt_cr_write(nvt, *ioaddr >> 8, CR_CIR_BASE_ADDR_HI); + nvt_cr_write(nvt, *ioaddr & 0xff, CR_CIR_BASE_ADDR_LO); + } +} + /* dump current cir register contents */ static void cir_dump_regs(struct nvt_dev *nvt) { @@ -332,8 +348,7 @@ static void nvt_cir_ldev_init(struct nvt_dev *nvt) /* Select CIR logical device */ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); - nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI); - nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO); + nvt_set_ioaddr(nvt, &nvt->cir_addr); nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC); @@ -356,8 +371,7 @@ static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt) /* Select CIR Wake logical device */ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE); - nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI); - nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO); + nvt_set_ioaddr(nvt, &nvt->cir_wake_addr); nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC); -- cgit v1.2.3-55-g7522