From 3675c8d7144e91d9a2a1f6f12e576cb92e06f352 Mon Sep 17 00:00:00 2001 From: Barry Grussling Date: Tue, 8 Jan 2013 16:05:53 +0000 Subject: DSA: Convert DSA comments to network-style comments Convert DSA driver comments to network-style comments as reported by checkpatch.pl. Fix spelling error. Signed-off-by: Barry Grussling Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6060.c | 31 +++++++++---------------------- 1 file changed, 9 insertions(+), 22 deletions(-) (limited to 'drivers/net/dsa/mv88e6060.c') diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 325391d19bad..637373cebf78 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -67,27 +67,19 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds) int i; int ret; - /* - * Set all ports to the disabled state. - */ + /* Set all ports to the disabled state. */ for (i = 0; i < 6; i++) { ret = REG_READ(REG_PORT(i), 0x04); REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); } - /* - * Wait for transmit queues to drain. - */ + /* Wait for transmit queues to drain. */ msleep(2); - /* - * Reset the switch. - */ + /* Reset the switch. */ REG_WRITE(REG_GLOBAL, 0x0a, 0xa130); - /* - * Wait up to one second for reset to complete. - */ + /* Wait up to one second for reset to complete. */ for (i = 0; i < 1000; i++) { ret = REG_READ(REG_GLOBAL, 0x00); if ((ret & 0x8000) == 0x0000) @@ -103,15 +95,13 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds) static int mv88e6060_setup_global(struct dsa_switch *ds) { - /* - * Disable discarding of frames with excessive collisions, + /* Disable discarding of frames with excessive collisions, * set the maximum frame size to 1536 bytes, and mask all * interrupt sources. */ REG_WRITE(REG_GLOBAL, 0x04, 0x0800); - /* - * Enable automatic address learning, set the address + /* Enable automatic address learning, set the address * database size to 1024 entries, and set the default aging * time to 5 minutes. */ @@ -124,16 +114,14 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p) { int addr = REG_PORT(p); - /* - * Do not force flow control, disable Ingress and Egress + /* Do not force flow control, disable Ingress and Egress * Header tagging, disable VLAN tunneling, and set the port * state to Forwarding. Additionally, if this is the CPU * port, enable Ingress and Egress Trailer tagging mode. */ REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003); - /* - * Port based VLAN map: give each port its own address + /* Port based VLAN map: give each port its own address * database, allow the CPU port to talk to each of the 'real' * ports, and allow each of the 'real' ports to only talk to * the CPU port. @@ -144,8 +132,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p) ds->phys_port_mask : (1 << ds->dst->cpu_port))); - /* - * Port Association Vector: when learning source addresses + /* Port Association Vector: when learning source addresses * of packets, add the address to the address database using * a port bitmap that has only the bit for this port set and * the other bits clear. -- cgit v1.2.3-55-g7522