From 66d29cbc59433ba538922a9e958495156b31b83b Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Sun, 3 Mar 2013 21:48:46 +0000 Subject: benet: Wait f/w POST until timeout While PCI card faces EEH errors, reset (usually hot reset) is expected to recover from the EEH errors. After EEH core finishes the reset, the driver callback (be_eeh_reset) is called and wait the firmware to complete POST successfully. The original code would return with error once detecting failure during POST stage. That seems not enough. The patch forces the driver (be_eeh_reset) to wait the firmware completes POST until timeout, instead of returning error upon detection POST failure immediately. Also, it would improve the reliability of the EEH funtionality of the driver. Signed-off-by: Gavin Shan Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 071aea79d218..813407f66c7c 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -473,7 +473,7 @@ static int be_mbox_notify_wait(struct be_adapter *adapter) return 0; } -static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage) +static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage) { u32 sem; u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH : @@ -481,11 +481,6 @@ static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage) pci_read_config_dword(adapter->pdev, reg, &sem); *stage = sem & POST_STAGE_MASK; - - if ((sem >> POST_ERR_SHIFT) & POST_ERR_MASK) - return -1; - else - return 0; } int lancer_wait_ready(struct be_adapter *adapter) @@ -579,19 +574,17 @@ int be_fw_wait_ready(struct be_adapter *adapter) } do { - status = be_POST_stage_get(adapter, &stage); - if (status) { - dev_err(dev, "POST error; stage=0x%x\n", stage); - return -1; - } else if (stage != POST_STAGE_ARMFW_RDY) { - if (msleep_interruptible(2000)) { - dev_err(dev, "Waiting for POST aborted\n"); - return -EINTR; - } - timeout += 2; - } else { + be_POST_stage_get(adapter, &stage); + if (stage == POST_STAGE_ARMFW_RDY) return 0; + + dev_info(dev, "Waiting for POST, %ds elapsed\n", + timeout); + if (msleep_interruptible(2000)) { + dev_err(dev, "Waiting for POST aborted\n"); + return -EINTR; } + timeout += 2; } while (timeout < 60); dev_err(dev, "POST timeout; stage=0x%x\n", stage); -- cgit v1.2.3-55-g7522 From c5b3ad4c67989c778e4753be4f91dc7193a04d21 Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Tue, 5 Mar 2013 22:23:20 +0000 Subject: be2net: use CSR-BAR SEMAPHORE reg for BE2/BE3 The SLIPORT_SEMAPHORE register shadowed in the config-space may not reflect the correct POST stage after an EEH reset in BE2/3; it may return FW_READY state even though FW is not ready. This causes the driver to prematurely poll the FW mailbox and fail. For BE2/3 use the CSR-BAR/0xac instead. Reported-by: Gavin Shan Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_cmds.c | 15 +++++++++------ drivers/net/ethernet/emulex/benet/be_hw.h | 4 ++-- drivers/net/ethernet/emulex/benet/be_main.c | 10 ++++++++++ 4 files changed, 22 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet/emulex') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 28ceb8414185..29aff55f2eea 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -349,6 +349,7 @@ struct be_adapter { struct pci_dev *pdev; struct net_device *netdev; + u8 __iomem *csr; /* CSR BAR used only for BE2/3 */ u8 __iomem *db; /* Door Bell */ struct mutex mbox_lock; /* For serializing mbox cmds to BE card */ diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 813407f66c7c..3c9b4f12e3e5 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -473,14 +473,17 @@ static int be_mbox_notify_wait(struct be_adapter *adapter) return 0; } -static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage) +static u16 be_POST_stage_get(struct be_adapter *adapter) { u32 sem; - u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH : - SLIPORT_SEMAPHORE_OFFSET_BE; - pci_read_config_dword(adapter->pdev, reg, &sem); - *stage = sem & POST_STAGE_MASK; + if (BEx_chip(adapter)) + sem = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx); + else + pci_read_config_dword(adapter->pdev, + SLIPORT_SEMAPHORE_OFFSET_SH, &sem); + + return sem & POST_STAGE_MASK; } int lancer_wait_ready(struct be_adapter *adapter) @@ -574,7 +577,7 @@ int be_fw_wait_ready(struct be_adapter *adapter) } do { - be_POST_stage_get(adapter, &stage); + stage = be_POST_stage_get(adapter); if (stage == POST_STAGE_ARMFW_RDY) return 0; diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index 541d4530d5bf..62dc220695f7 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -32,8 +32,8 @@ #define MPU_EP_CONTROL 0 /********** MPU semphore: used for SH & BE *************/ -#define SLIPORT_SEMAPHORE_OFFSET_BE 0x7c -#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 +#define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */ +#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */ #define POST_STAGE_MASK 0x0000FFFF #define POST_ERR_MASK 0x1 #define POST_ERR_SHIFT 31 diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 3860888ac711..08e54f3d288b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3688,6 +3688,8 @@ static void be_netdev_init(struct net_device *netdev) static void be_unmap_pci_bars(struct be_adapter *adapter) { + if (adapter->csr) + pci_iounmap(adapter->pdev, adapter->csr); if (adapter->db) pci_iounmap(adapter->pdev, adapter->db); } @@ -3721,6 +3723,12 @@ static int be_map_pci_bars(struct be_adapter *adapter) adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >> SLI_INTF_IF_TYPE_SHIFT; + if (BEx_chip(adapter) && be_physfn(adapter)) { + adapter->csr = pci_iomap(adapter->pdev, 2, 0); + if (adapter->csr == NULL) + return -ENOMEM; + } + addr = pci_iomap(adapter->pdev, db_bar(adapter), 0); if (addr == NULL) goto pci_map_err; @@ -4329,6 +4337,8 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) pci_restore_state(pdev); /* Check if card is ok and fw is ready */ + dev_info(&adapter->pdev->dev, + "Waiting for FW to be ready after EEH reset\n"); status = be_fw_wait_ready(adapter); if (status) return PCI_ERS_RESULT_DISCONNECT; -- cgit v1.2.3-55-g7522