From 33bfdeaa768a2b53abc7b8c0f3cae272770d31d4 Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:40 -0700
Subject: net: pch_gbe: Remove unused copybreak parameter

The pch_gbe driver includes a 'copybreak' parameter which appears to
have been copied from the e1000e driver but is entirely unused. Remove
the dead code.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 15 ---------------
 1 file changed, 15 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 34a1581eda95..044a7561752c 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -34,7 +34,6 @@ const char pch_driver_version[] = DRV_VERSION;
 #define PCH_GBE_DMA_ALIGN		0
 #define PCH_GBE_DMA_PADDING		2
 #define PCH_GBE_WATCHDOG_PERIOD		(5 * HZ)	/* watchdog time */
-#define PCH_GBE_COPYBREAK_DEFAULT	256
 #define PCH_GBE_PCI_BAR			1
 #define PCH_GBE_RESERVE_MEMORY		0x200000	/* 2MB */
 
@@ -113,8 +112,6 @@ const char pch_driver_version[] = DRV_VERSION;
 
 #define MINNOW_PHY_RESET_GPIO		13
 
-static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT;
-
 static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg);
 static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg,
 			       int data);
@@ -2784,14 +2781,6 @@ static int __init pch_gbe_init_module(void)
 
 	pr_info("EG20T PCH Gigabit Ethernet Driver - version %s\n",DRV_VERSION);
 	ret = pci_register_driver(&pch_gbe_driver);
-	if (copybreak != PCH_GBE_COPYBREAK_DEFAULT) {
-		if (copybreak == 0) {
-			pr_info("copybreak disabled\n");
-		} else {
-			pr_info("copybreak enabled for packets <= %u bytes\n",
-				copybreak);
-		}
-	}
 	return ret;
 }
 
@@ -2809,8 +2798,4 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id);
 
-module_param(copybreak, uint, 0644);
-MODULE_PARM_DESC(copybreak,
-	"Maximum size of packet that is copied to a new buffer on receive");
-
 /* pch_gbe_main.c */
-- 
cgit v1.2.3-55-g7522


From ac6c0e0aa49ff8cb26573fe31403800de98218a1 Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:41 -0700
Subject: net: pch_gbe: Remove power_{up,down}_phy HAL abstraction

For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.

This patch removes the power_up_phy & power_down_phy abstractions in
favor of calling pch_phy_power_up & pch_phy_power_down directly.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h    |  4 ----
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c    | 22 ----------------------
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h    |  2 --
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 12 ++++++------
 4 files changed, 6 insertions(+), 34 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 697e29dd4bd3..8dc40faef720 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -336,8 +336,6 @@ struct pch_gbe_hw;
  * @write_phy_reg:	for pch_gbe_hal_write_phy_reg
  * @reset_phy:		for pch_gbe_hal_phy_hw_reset
  * @sw_reset_phy:	for pch_gbe_hal_phy_sw_reset
- * @power_up_phy:	for pch_gbe_hal_power_up_phy
- * @power_down_phy:	for pch_gbe_hal_power_down_phy
  * @read_mac_addr:	for pch_gbe_hal_read_mac_addr
  */
 struct pch_gbe_functions {
@@ -347,8 +345,6 @@ struct pch_gbe_functions {
 	s32 (*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
 	void (*reset_phy) (struct pch_gbe_hw *);
 	void (*sw_reset_phy) (struct pch_gbe_hw *);
-	void (*power_up_phy) (struct pch_gbe_hw *hw);
-	void (*power_down_phy) (struct pch_gbe_hw *hw);
 	s32 (*read_mac_addr) (struct pch_gbe_hw *);
 };
 
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 51250363566b..d66933b68934 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -90,8 +90,6 @@ static const struct pch_gbe_functions pch_gbe_ops = {
 	.write_phy_reg     = pch_gbe_phy_write_reg_miic,
 	.reset_phy         = pch_gbe_phy_hw_reset,
 	.sw_reset_phy      = pch_gbe_phy_sw_reset,
-	.power_up_phy      = pch_gbe_phy_power_up,
-	.power_down_phy    = pch_gbe_phy_power_down,
 	.read_mac_addr     = pch_gbe_mac_read_mac_addr
 };
 
@@ -240,23 +238,3 @@ s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
 	}
 	return hw->func->read_mac_addr(hw);
 }
-
-/**
- * pch_gbe_hal_power_up_phy - Power up PHY
- * @hw:	Pointer to the HW structure
- */
-void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw)
-{
-	if (hw->func->power_up_phy)
-		hw->func->power_up_phy(hw);
-}
-
-/**
- * pch_gbe_hal_power_down_phy - Power down PHY
- * @hw:	Pointer to the HW structure
- */
-void pch_gbe_hal_power_down_phy(struct pch_gbe_hw *hw)
-{
-	if (hw->func->power_down_phy)
-		hw->func->power_down_phy(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 91ce07c8306c..be2f202c26c4 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -29,7 +29,5 @@ s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
 void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw);
 void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw);
 s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw);
-void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw);
-void pch_gbe_hal_power_down_phy(struct pch_gbe_hw *hw);
 
 #endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 044a7561752c..13fc828c7fd3 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2072,7 +2072,7 @@ static int pch_gbe_open(struct net_device *netdev)
 	err = pch_gbe_setup_rx_resources(adapter, adapter->rx_ring);
 	if (err)
 		goto err_setup_rx;
-	pch_gbe_hal_power_up_phy(hw);
+	pch_gbe_phy_power_up(hw);
 	err = pch_gbe_up(adapter);
 	if (err)
 		goto err_up;
@@ -2081,7 +2081,7 @@ static int pch_gbe_open(struct net_device *netdev)
 
 err_up:
 	if (!adapter->wake_up_evt)
-		pch_gbe_hal_power_down_phy(hw);
+		pch_gbe_phy_power_down(hw);
 	pch_gbe_free_rx_resources(adapter, adapter->rx_ring);
 err_setup_rx:
 	pch_gbe_free_tx_resources(adapter, adapter->tx_ring);
@@ -2104,7 +2104,7 @@ static int pch_gbe_stop(struct net_device *netdev)
 
 	pch_gbe_down(adapter);
 	if (!adapter->wake_up_evt)
-		pch_gbe_hal_power_down_phy(hw);
+		pch_gbe_phy_power_down(hw);
 	pch_gbe_free_tx_resources(adapter, adapter->tx_ring);
 	pch_gbe_free_rx_resources(adapter, adapter->rx_ring);
 	return 0;
@@ -2434,7 +2434,7 @@ static pci_ers_result_t pch_gbe_io_slot_reset(struct pci_dev *pdev)
 	}
 	pci_set_master(pdev);
 	pci_enable_wake(pdev, PCI_D0, 0);
-	pch_gbe_hal_power_up_phy(hw);
+	pch_gbe_phy_power_up(hw);
 	pch_gbe_reset(adapter);
 	/* Clear wake up status */
 	pch_gbe_mac_set_wol_event(hw, 0);
@@ -2479,7 +2479,7 @@ static int __pch_gbe_suspend(struct pci_dev *pdev)
 		pch_gbe_mac_set_wol_event(hw, wufc);
 		pci_disable_device(pdev);
 	} else {
-		pch_gbe_hal_power_down_phy(hw);
+		pch_gbe_phy_power_down(hw);
 		pch_gbe_mac_set_wol_event(hw, wufc);
 		pci_disable_device(pdev);
 	}
@@ -2508,7 +2508,7 @@ static int pch_gbe_resume(struct device *device)
 		return err;
 	}
 	pci_set_master(pdev);
-	pch_gbe_hal_power_up_phy(hw);
+	pch_gbe_phy_power_up(hw);
 	pch_gbe_reset(adapter);
 	/* Clear wake on lan control and status */
 	pch_gbe_mac_set_wol_event(hw, 0);
-- 
cgit v1.2.3-55-g7522


From 9c020d7b0525d3b913a85d055a34aca64d852be5 Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:42 -0700
Subject: net: pch_gbe: Remove read_mac_addr HAL abstraction

For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.

This patch removes the read_mac_addr abstraction in favor of calling
pch_gbe_mac_read_mac_addr directly. Since this is defined in the same
translation unit as all of its callers, we can make it static & remove
it from the pch_gbe.h header.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h      |  3 ---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c  | 19 -------------------
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h  |  1 -
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c |  4 ++--
 4 files changed, 2 insertions(+), 25 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 8dc40faef720..5dbfcd55efa8 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -336,7 +336,6 @@ struct pch_gbe_hw;
  * @write_phy_reg:	for pch_gbe_hal_write_phy_reg
  * @reset_phy:		for pch_gbe_hal_phy_hw_reset
  * @sw_reset_phy:	for pch_gbe_hal_phy_sw_reset
- * @read_mac_addr:	for pch_gbe_hal_read_mac_addr
  */
 struct pch_gbe_functions {
 	void (*get_bus_info) (struct pch_gbe_hw *);
@@ -345,7 +344,6 @@ struct pch_gbe_functions {
 	s32 (*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
 	void (*reset_phy) (struct pch_gbe_hw *);
 	void (*sw_reset_phy) (struct pch_gbe_hw *);
-	s32 (*read_mac_addr) (struct pch_gbe_hw *);
 };
 
 /**
@@ -676,7 +674,6 @@ void pch_gbe_set_ethtool_ops(struct net_device *netdev);
 
 /* pch_gbe_mac.c */
 s32 pch_gbe_mac_force_mac_fc(struct pch_gbe_hw *hw);
-s32 pch_gbe_mac_read_mac_addr(struct pch_gbe_hw *hw);
 u16 pch_gbe_mac_ctrl_miim(struct pch_gbe_hw *hw, u32 addr, u32 dir, u32 reg,
 			  u16 data);
 #endif /* _PCH_GBE_H_ */
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index d66933b68934..3c6e009955ab 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -90,7 +90,6 @@ static const struct pch_gbe_functions pch_gbe_ops = {
 	.write_phy_reg     = pch_gbe_phy_write_reg_miic,
 	.reset_phy         = pch_gbe_phy_hw_reset,
 	.sw_reset_phy      = pch_gbe_phy_sw_reset,
-	.read_mac_addr     = pch_gbe_mac_read_mac_addr
 };
 
 /**
@@ -220,21 +219,3 @@ void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
 	}
 	hw->func->sw_reset_phy(hw);
 }
-
-/**
- * pch_gbe_hal_read_mac_addr - Reads MAC address
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:	Successfully
- *	ENOSYS:	Function is not registered
- */
-s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->read_mac_addr) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return -ENOSYS;
-	}
-	return hw->func->read_mac_addr(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index be2f202c26c4..13fcdfb4a94d 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -28,6 +28,5 @@ s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 *data);
 s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
 void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw);
 void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw);
-s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw);
 
 #endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 13fc828c7fd3..fc5079fa01e8 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -287,7 +287,7 @@ static inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw)
  * Returns:
  *	0:			Successful.
  */
-s32 pch_gbe_mac_read_mac_addr(struct pch_gbe_hw *hw)
+static s32 pch_gbe_mac_read_mac_addr(struct pch_gbe_hw *hw)
 {
 	struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
 	u32  adr1a, adr1b;
@@ -2627,7 +2627,7 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 	pch_gbe_hal_get_bus_info(&adapter->hw);
 
 	/* Read the MAC address. and store to the private data */
-	ret = pch_gbe_hal_read_mac_addr(&adapter->hw);
+	ret = pch_gbe_mac_read_mac_addr(&adapter->hw);
 	if (ret) {
 		dev_err(&pdev->dev, "MAC address Read Error\n");
 		goto err_free_adapter;
-- 
cgit v1.2.3-55-g7522


From 66dde2b0aa7013dbaf9d0e18ff24360877312a79 Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:43 -0700
Subject: net: pch_gbe: Remove sw_reset_phy HAL abstraction

For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.

This patch removes the sw_reset_phy abstraction, which it turns out is
never even used. Its one implementation, which is already called
directly within the same translation unit, can therefore be made static
and removed from the pch_gbe_phy.h header.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h     |  2 --
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c | 16 ----------------
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h |  1 -
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c |  2 +-
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h |  1 -
 5 files changed, 1 insertion(+), 21 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 5dbfcd55efa8..47ee7428c3d3 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -335,7 +335,6 @@ struct pch_gbe_hw;
  * @read_phy_reg:	for pch_gbe_hal_read_phy_reg
  * @write_phy_reg:	for pch_gbe_hal_write_phy_reg
  * @reset_phy:		for pch_gbe_hal_phy_hw_reset
- * @sw_reset_phy:	for pch_gbe_hal_phy_sw_reset
  */
 struct pch_gbe_functions {
 	void (*get_bus_info) (struct pch_gbe_hw *);
@@ -343,7 +342,6 @@ struct pch_gbe_functions {
 	s32 (*read_phy_reg) (struct pch_gbe_hw *, u32, u16 *);
 	s32 (*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
 	void (*reset_phy) (struct pch_gbe_hw *);
-	void (*sw_reset_phy) (struct pch_gbe_hw *);
 };
 
 /**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 3c6e009955ab..e1ecfb076029 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -89,7 +89,6 @@ static const struct pch_gbe_functions pch_gbe_ops = {
 	.read_phy_reg      = pch_gbe_phy_read_reg_miic,
 	.write_phy_reg     = pch_gbe_phy_write_reg_miic,
 	.reset_phy         = pch_gbe_phy_hw_reset,
-	.sw_reset_phy      = pch_gbe_phy_sw_reset,
 };
 
 /**
@@ -204,18 +203,3 @@ void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
 	}
 	hw->func->reset_phy(hw);
 }
-
-/**
- * pch_gbe_hal_phy_sw_reset - Soft PHY reset
- * @hw:	    Pointer to the HW structure
- */
-void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->sw_reset_phy) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return;
-	}
-	hw->func->sw_reset_phy(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 13fcdfb4a94d..aa802f670055 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -27,6 +27,5 @@ s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
 s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 *data);
 s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
 void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw);
-void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw);
 
 #endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
index a5cad5ea9436..6b35b573beef 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
@@ -184,7 +184,7 @@ s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data)
  * pch_gbe_phy_sw_reset - PHY software reset
  * @hw:	            Pointer to the HW structure
  */
-void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw)
+static void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw)
 {
 	u16 phy_ctrl;
 
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
index 95ad0151ad02..efb955be8cac 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
@@ -26,7 +26,6 @@
 s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw);
 s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data);
 s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data);
-void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw);
 void pch_gbe_phy_hw_reset(struct pch_gbe_hw *hw);
 void pch_gbe_phy_power_up(struct pch_gbe_hw *hw);
 void pch_gbe_phy_power_down(struct pch_gbe_hw *hw);
-- 
cgit v1.2.3-55-g7522


From 7dbe38aed0ba01e9557621d7e6d59c5b92decead Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:44 -0700
Subject: net: pch_gbe: Remove reset_phy HAL abstraction

For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.

This patch removes the reset_phy abstraction in favor of calling
pch_gbe_phy_hw_reset directly.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h      |  2 --
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c  | 16 ----------------
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h  |  1 -
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c |  4 ++--
 4 files changed, 2 insertions(+), 21 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 47ee7428c3d3..02e8da2b6ad2 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -334,14 +334,12 @@ struct pch_gbe_hw;
  * @init_hw:		for pch_gbe_hal_init_hw
  * @read_phy_reg:	for pch_gbe_hal_read_phy_reg
  * @write_phy_reg:	for pch_gbe_hal_write_phy_reg
- * @reset_phy:		for pch_gbe_hal_phy_hw_reset
  */
 struct pch_gbe_functions {
 	void (*get_bus_info) (struct pch_gbe_hw *);
 	s32 (*init_hw) (struct pch_gbe_hw *);
 	s32 (*read_phy_reg) (struct pch_gbe_hw *, u32, u16 *);
 	s32 (*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
-	void (*reset_phy) (struct pch_gbe_hw *);
 };
 
 /**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index e1ecfb076029..6fe09af545e8 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -88,7 +88,6 @@ static const struct pch_gbe_functions pch_gbe_ops = {
 	.init_hw           = pch_gbe_plat_init_hw,
 	.read_phy_reg      = pch_gbe_phy_read_reg_miic,
 	.write_phy_reg     = pch_gbe_phy_write_reg_miic,
-	.reset_phy         = pch_gbe_phy_hw_reset,
 };
 
 /**
@@ -188,18 +187,3 @@ s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
 		return 0;
 	return hw->func->write_phy_reg(hw, offset, data);
 }
-
-/**
- * pch_gbe_hal_phy_hw_reset - Hard PHY reset
- * @hw:	    Pointer to the HW structure
- */
-void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->reset_phy) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return;
-	}
-	hw->func->reset_phy(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index aa802f670055..96540f6648b5 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -26,6 +26,5 @@ void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
 s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
 s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 *data);
 s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
-void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw);
 
 #endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index fc5079fa01e8..175d6608bdb9 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2538,7 +2538,7 @@ static void pch_gbe_remove(struct pci_dev *pdev)
 	cancel_work_sync(&adapter->reset_task);
 	unregister_netdev(netdev);
 
-	pch_gbe_hal_phy_hw_reset(&adapter->hw);
+	pch_gbe_phy_hw_reset(&adapter->hw);
 
 	free_netdev(netdev);
 }
@@ -2674,7 +2674,7 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 	return 0;
 
 err_free_adapter:
-	pch_gbe_hal_phy_hw_reset(&adapter->hw);
+	pch_gbe_phy_hw_reset(&adapter->hw);
 err_free_netdev:
 	free_netdev(netdev);
 	return ret;
-- 
cgit v1.2.3-55-g7522


From c96a0f74312ba7a640b50257d58085f372fff352 Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:45 -0700
Subject: net: pch_gbe: Remove {read,write}_phy_reg HAL abstraction

For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.

This patch removes the read_phy_reg & write_phy_reg abstractions in
favor of calling pch_gbe_phy_read_reg_miic & pch_gbe_phy_write_reg_miic
directly.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h    |  4 ---
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c    | 36 ----------------------
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h    |  2 --
 .../ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c    |  4 +--
 4 files changed, 2 insertions(+), 44 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 02e8da2b6ad2..728e876bffc6 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -332,14 +332,10 @@ struct pch_gbe_hw;
  * struct  pch_gbe_functions - HAL APi function pointer
  * @get_bus_info:	for pch_gbe_hal_get_bus_info
  * @init_hw:		for pch_gbe_hal_init_hw
- * @read_phy_reg:	for pch_gbe_hal_read_phy_reg
- * @write_phy_reg:	for pch_gbe_hal_write_phy_reg
  */
 struct pch_gbe_functions {
 	void (*get_bus_info) (struct pch_gbe_hw *);
 	s32 (*init_hw) (struct pch_gbe_hw *);
-	s32 (*read_phy_reg) (struct pch_gbe_hw *, u32, u16 *);
-	s32 (*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
 };
 
 /**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 6fe09af545e8..484be4225352 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -86,8 +86,6 @@ static s32 pch_gbe_plat_init_hw(struct pch_gbe_hw *hw)
 static const struct pch_gbe_functions pch_gbe_ops = {
 	.get_bus_info      = pch_gbe_plat_get_bus_info,
 	.init_hw           = pch_gbe_plat_init_hw,
-	.read_phy_reg      = pch_gbe_phy_read_reg_miic,
-	.write_phy_reg     = pch_gbe_phy_write_reg_miic,
 };
 
 /**
@@ -153,37 +151,3 @@ s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
 	}
 	return hw->func->init_hw(hw);
 }
-
-/**
- * pch_gbe_hal_read_phy_reg - Reads PHY register
- * @hw:	    Pointer to the HW structure
- * @offset: The register to read
- * @data:   The buffer to store the 16-bit read.
- * Returns:
- *	0:	Successfully
- *	Negative value:	Failed
- */
-s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
-					u16 *data)
-{
-	if (!hw->func->read_phy_reg)
-		return 0;
-	return hw->func->read_phy_reg(hw, offset, data);
-}
-
-/**
- * pch_gbe_hal_write_phy_reg - Writes PHY register
- * @hw:	    Pointer to the HW structure
- * @offset: The register to read
- * @data:   The value to write.
- * Returns:
- *	0:	Successfully
- *	Negative value:	Failed
- */
-s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
-					u16 data)
-{
-	if (!hw->func->write_phy_reg)
-		return 0;
-	return hw->func->write_phy_reg(hw, offset, data);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 96540f6648b5..9cd19605f4ff 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -24,7 +24,5 @@
 s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
 void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
 s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
-s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 *data);
-s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
 
 #endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
index 731ce1e419e4..da39d771ad87 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
@@ -125,7 +125,7 @@ static int pch_gbe_set_link_ksettings(struct net_device *netdev,
 	u32 advertising;
 	int ret;
 
-	pch_gbe_hal_write_phy_reg(hw, MII_BMCR, BMCR_RESET);
+	pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET);
 
 	memcpy(&copy_ecmd, ecmd, sizeof(*ecmd));
 
@@ -204,7 +204,7 @@ static void pch_gbe_get_regs(struct net_device *netdev,
 		*regs_buff++ = ioread32(&hw->reg->INT_ST + i);
 	/* PHY register */
 	for (i = 0; i < PCH_GBE_PHY_REGS_LEN; i++) {
-		pch_gbe_hal_read_phy_reg(&adapter->hw, i, &tmp);
+		pch_gbe_phy_read_reg_miic(&adapter->hw, i, &tmp);
 		*regs_buff++ = tmp;
 	}
 }
-- 
cgit v1.2.3-55-g7522


From 3ef594b0e465c4dd7b1ea7736dfc4bb80c53e33d Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:46 -0700
Subject: net: pch_gbe: Remove init_hw HAL abstraction

For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.

This patch removes the init_hw abstraction in favor of inlining its
single implementation (pch_gbe_plat_init_hw) into its single caller
(pch_gbe_reset).

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h    |  2 -
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c    | 45 ----------------------
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h    |  1 -
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 19 +++++++--
 4 files changed, 15 insertions(+), 52 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 728e876bffc6..2e824baff9d7 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -331,11 +331,9 @@ struct pch_gbe_hw;
 /**
  * struct  pch_gbe_functions - HAL APi function pointer
  * @get_bus_info:	for pch_gbe_hal_get_bus_info
- * @init_hw:		for pch_gbe_hal_init_hw
  */
 struct pch_gbe_functions {
 	void (*get_bus_info) (struct pch_gbe_hw *);
-	s32 (*init_hw) (struct pch_gbe_hw *);
 };
 
 /**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 484be4225352..03fbd4752d4f 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -57,35 +57,8 @@ static void pch_gbe_plat_get_bus_info(struct pch_gbe_hw *hw)
 	hw->bus.width = pch_gbe_bus_width_pcie_x1;
 }
 
-/**
- * pch_gbe_plat_init_hw - Initialize hardware
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:		Successfully
- *	Negative value:	Failed-EBUSY
- */
-static s32 pch_gbe_plat_init_hw(struct pch_gbe_hw *hw)
-{
-	s32 ret_val;
-
-	ret_val = pch_gbe_phy_get_id(hw);
-	if (ret_val) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "pch_gbe_phy_get_id error\n");
-		return ret_val;
-	}
-	pch_gbe_phy_init_setting(hw);
-	/* Setup Mac interface option RGMII */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
-	pch_gbe_phy_set_rgmii(hw);
-#endif
-	return ret_val;
-}
-
 static const struct pch_gbe_functions pch_gbe_ops = {
 	.get_bus_info      = pch_gbe_plat_get_bus_info,
-	.init_hw           = pch_gbe_plat_init_hw,
 };
 
 /**
@@ -133,21 +106,3 @@ void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
 	}
 	hw->func->get_bus_info(hw);
 }
-
-/**
- * pch_gbe_hal_init_hw - Initialize hardware
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:	Successfully
- *	ENOSYS:	Function is not registered
- */
-s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->init_hw) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return -ENOSYS;
-	}
-	return hw->func->init_hw(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 9cd19605f4ff..56cae9cfb5c5 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -23,6 +23,5 @@
 
 s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
 void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
-s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
 
 #endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 175d6608bdb9..9297a94df999 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -760,14 +760,25 @@ void pch_gbe_reinit_locked(struct pch_gbe_adapter *adapter)
 void pch_gbe_reset(struct pch_gbe_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct pch_gbe_hw *hw = &adapter->hw;
+	s32 ret_val;
 
-	pch_gbe_mac_reset_hw(&adapter->hw);
+	pch_gbe_mac_reset_hw(hw);
 	/* reprogram multicast address register after reset */
 	pch_gbe_set_multi(netdev);
 	/* Setup the receive address. */
-	pch_gbe_mac_init_rx_addrs(&adapter->hw, PCH_GBE_MAR_ENTRIES);
-	if (pch_gbe_hal_init_hw(&adapter->hw))
-		netdev_err(netdev, "Hardware Error\n");
+	pch_gbe_mac_init_rx_addrs(hw, PCH_GBE_MAR_ENTRIES);
+
+	ret_val = pch_gbe_phy_get_id(hw);
+	if (ret_val) {
+		netdev_err(adapter->netdev, "pch_gbe_phy_get_id error\n");
+		return;
+	}
+	pch_gbe_phy_init_setting(hw);
+	/* Setup Mac interface option RGMII */
+#ifdef PCH_GBE_MAC_IFOP_RGMII
+	pch_gbe_phy_set_rgmii(hw);
+#endif
 }
 
 /**
-- 
cgit v1.2.3-55-g7522


From b02c38a23a5a308466d6cf87895ef16b6fa3306c Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:47 -0700
Subject: net: pch_gbe: Remove get_bus_info HAL abstraction

For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.

This patch removes the get_bus_info abstraction. Its single
implementation (pch_gbe_plat_get_bus_info) only sets values within a
struct pch_gbe_bus_info which is never used, so we simply remove the
call to it in pch_gbe_probe & remove struct pch_gbe_bus_info entirely.

Now that struct pch_gbe_functions is empty we remove it entirely too.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h    | 23 ---------
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c    | 58 ----------------------
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h    |  1 -
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   |  1 -
 4 files changed, 83 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 2e824baff9d7..44c2f291e766 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -326,16 +326,6 @@ struct pch_gbe_regs {
 #define PCH_GBE_FC_FULL			3
 #define PCH_GBE_FC_DEFAULT		PCH_GBE_FC_FULL
 
-
-struct pch_gbe_hw;
-/**
- * struct  pch_gbe_functions - HAL APi function pointer
- * @get_bus_info:	for pch_gbe_hal_get_bus_info
- */
-struct pch_gbe_functions {
-	void (*get_bus_info) (struct pch_gbe_hw *);
-};
-
 /**
  * struct pch_gbe_mac_info - MAC information
  * @addr[6]:		Store the MAC address
@@ -376,17 +366,6 @@ struct pch_gbe_phy_info {
 	u16 autoneg_advertised;
 };
 
-/*!
- * @ingroup Gigabit Ether driver Layer
- * @struct  pch_gbe_bus_info
- * @brief   Bus information
- */
-struct pch_gbe_bus_info {
-	u8 type;
-	u8 speed;
-	u8 width;
-};
-
 /*!
  * @ingroup Gigabit Ether driver Layer
  * @struct  pch_gbe_hw
@@ -398,10 +377,8 @@ struct pch_gbe_hw {
 	struct pch_gbe_regs  __iomem *reg;
 	spinlock_t miim_lock;
 
-	const struct pch_gbe_functions *func;
 	struct pch_gbe_mac_info mac;
 	struct pch_gbe_phy_info phy;
-	struct pch_gbe_bus_info bus;
 };
 
 /**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 03fbd4752d4f..89c0db27b797 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -20,47 +20,6 @@
 #include "pch_gbe_phy.h"
 #include "pch_gbe_api.h"
 
-/* bus type values */
-#define pch_gbe_bus_type_unknown	0
-#define pch_gbe_bus_type_pci		1
-#define pch_gbe_bus_type_pcix		2
-#define pch_gbe_bus_type_pci_express	3
-#define pch_gbe_bus_type_reserved	4
-
-/* bus speed values */
-#define pch_gbe_bus_speed_unknown	0
-#define pch_gbe_bus_speed_33		1
-#define pch_gbe_bus_speed_66		2
-#define pch_gbe_bus_speed_100		3
-#define pch_gbe_bus_speed_120		4
-#define pch_gbe_bus_speed_133		5
-#define pch_gbe_bus_speed_2500		6
-#define pch_gbe_bus_speed_reserved	7
-
-/* bus width values */
-#define pch_gbe_bus_width_unknown	0
-#define pch_gbe_bus_width_pcie_x1	1
-#define pch_gbe_bus_width_pcie_x2	2
-#define pch_gbe_bus_width_pcie_x4	4
-#define pch_gbe_bus_width_32		5
-#define pch_gbe_bus_width_64		6
-#define pch_gbe_bus_width_reserved	7
-
-/**
- * pch_gbe_plat_get_bus_info - Obtain bus information for adapter
- * @hw:	Pointer to the HW structure
- */
-static void pch_gbe_plat_get_bus_info(struct pch_gbe_hw *hw)
-{
-	hw->bus.type  = pch_gbe_bus_type_pci_express;
-	hw->bus.speed = pch_gbe_bus_speed_2500;
-	hw->bus.width = pch_gbe_bus_width_pcie_x1;
-}
-
-static const struct pch_gbe_functions pch_gbe_ops = {
-	.get_bus_info      = pch_gbe_plat_get_bus_info,
-};
-
 /**
  * pch_gbe_plat_init_function_pointers - Init func ptrs
  * @hw:	Pointer to the HW structure
@@ -69,8 +28,6 @@ static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
 {
 	/* Set PHY parameter */
 	hw->phy.reset_delay_us     = PCH_GBE_PHY_RESET_DELAY_US;
-	/* Set function pointers */
-	hw->func = &pch_gbe_ops;
 }
 
 /**
@@ -91,18 +48,3 @@ s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
 	pch_gbe_plat_init_function_pointers(hw);
 	return 0;
 }
-
-/**
- * pch_gbe_hal_get_bus_info - Obtain bus information for adapter
- * @hw:	Pointer to the HW structure
- */
-void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->get_bus_info) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return;
-	}
-	hw->func->get_bus_info(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 56cae9cfb5c5..b3b713a32f38 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -22,6 +22,5 @@
 #include "pch_gbe_phy.h"
 
 s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
-void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
 
 #endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 9297a94df999..246167dbeacd 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2635,7 +2635,6 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 		dev_err(&pdev->dev, "PHY initialize error\n");
 		goto err_free_adapter;
 	}
-	pch_gbe_hal_get_bus_info(&adapter->hw);
 
 	/* Read the MAC address. and store to the private data */
 	ret = pch_gbe_mac_read_mac_addr(&adapter->hw);
-- 
cgit v1.2.3-55-g7522


From c63ebdf01ad96d8c11ab3ff245a3acd30e7fc8ba Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:48 -0700
Subject: net: pch_gbe: Remove pch_gbe_hal_setup_init_funcs

The pch_gbe driver calls a pch_gbe_hal_setup_init_funcs function which
ultimately sets the value of one field in struct pch_gbe_phy_info in a
convoluted way.

This patch removes pch_gbe_hal_setup_init_funcs in favor of inlining it,
and in turn its callee pch_gbe_plat_init_function_pointers, into the
single caller pch_gbe_sw_init.

With this pch_gbe_api.c & pch_gbe_api.h are essentially empty, so they
are removed & inclusions of the latter replaced with pch_gbe_phy.h which
was previously being included via pch_gbe_api.h.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/Makefile     |  2 +-
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c    | 50 ----------------------
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h    | 26 -----------
 .../ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c    |  2 +-
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   |  8 +---
 5 files changed, 4 insertions(+), 84 deletions(-)
 delete mode 100644 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
 delete mode 100644 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Makefile b/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
index 31288d4ad248..862de0f3bc41 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
@@ -1,4 +1,4 @@
 obj-$(CONFIG_PCH_GBE) += pch_gbe.o
 
 pch_gbe-y := pch_gbe_phy.o pch_gbe_ethtool.o pch_gbe_param.o
-pch_gbe-y += pch_gbe_api.o pch_gbe_main.o
+pch_gbe-y += pch_gbe_main.o
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
deleted file mode 100644
index 89c0db27b797..000000000000
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
- *
- * This code was derived from the Intel e1000e Linux driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-#include "pch_gbe.h"
-#include "pch_gbe_phy.h"
-#include "pch_gbe_api.h"
-
-/**
- * pch_gbe_plat_init_function_pointers - Init func ptrs
- * @hw:	Pointer to the HW structure
- */
-static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
-{
-	/* Set PHY parameter */
-	hw->phy.reset_delay_us     = PCH_GBE_PHY_RESET_DELAY_US;
-}
-
-/**
- * pch_gbe_hal_setup_init_funcs - Initializes function pointers
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:	Successfully
- *	ENOSYS:	Function is not registered
- */
-s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
-{
-	if (!hw->reg) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: Registers not mapped\n");
-		return -ENOSYS;
-	}
-	pch_gbe_plat_init_function_pointers(hw);
-	return 0;
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
deleted file mode 100644
index b3b713a32f38..000000000000
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
- *
- * This code was derived from the Intel e1000e Linux driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef _PCH_GBE_API_H_
-#define _PCH_GBE_API_H_
-
-#include "pch_gbe_phy.h"
-
-s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
-
-#endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
index da39d771ad87..a7bdb53790ff 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
@@ -17,7 +17,7 @@
  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 #include "pch_gbe.h"
-#include "pch_gbe_api.h"
+#include "pch_gbe_phy.h"
 
 /**
  * pch_gbe_stats - Stats item information
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 246167dbeacd..5846e8cf1750 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -18,7 +18,7 @@
  */
 
 #include "pch_gbe.h"
-#include "pch_gbe_api.h"
+#include "pch_gbe_phy.h"
 #include <linux/module.h>
 #include <linux/net_tstamp.h>
 #include <linux/ptp_classify.h>
@@ -2037,12 +2037,8 @@ static int pch_gbe_sw_init(struct pch_gbe_adapter *adapter)
 	adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_2048;
 	hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 	hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+	hw->phy.reset_delay_us = PCH_GBE_PHY_RESET_DELAY_US;
 
-	/* Initialize the hardware-specific values */
-	if (pch_gbe_hal_setup_init_funcs(hw)) {
-		netdev_err(netdev, "Hardware Initialization Failure\n");
-		return -EIO;
-	}
 	if (pch_gbe_alloc_queues(adapter)) {
 		netdev_err(netdev, "Unable to allocate memory for queues\n");
 		return -ENOMEM;
-- 
cgit v1.2.3-55-g7522


From 41fd60fa74d6aac84c214afc71aa4b9d3edba263 Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:49 -0700
Subject: net: pch_gbe: Remove PCH_GBE_MAC_IFOP_RGMII define

The pch_gbe driver currently presumes that the PHY is connected using
RGMII, and would need further work to support other buses. It includes a
define which is always set that conditionalises some of the
RGMII-specific code regardless. Remove it. If we do ever support
different MII buses then preprocessor defines won't be the best way to
select between them anyway.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 9 ---------
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h  | 1 -
 2 files changed, 10 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 5846e8cf1750..11c42aa42b8a 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -366,9 +366,7 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw)
 	/* Read the MAC address. and store to the private data */
 	pch_gbe_mac_read_mac_addr(hw);
 	iowrite32(PCH_GBE_ALL_RST, &hw->reg->RESET);
-#ifdef PCH_GBE_MAC_IFOP_RGMII
 	iowrite32(PCH_GBE_MODE_GMII_ETHER, &hw->reg->MODE);
-#endif
 	pch_gbe_wait_clr_bit(&hw->reg->RESET, PCH_GBE_ALL_RST);
 	/* Setup the receive addresses */
 	pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
@@ -776,9 +774,7 @@ void pch_gbe_reset(struct pch_gbe_adapter *adapter)
 	}
 	pch_gbe_phy_init_setting(hw);
 	/* Setup Mac interface option RGMII */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
 	pch_gbe_phy_set_rgmii(hw);
-#endif
 }
 
 /**
@@ -1044,7 +1040,6 @@ static void pch_gbe_set_rgmii_ctrl(struct pch_gbe_adapter *adapter, u16 speed,
 	unsigned long rgmii = 0;
 
 	/* Set the RGMII control. */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
 	switch (speed) {
 	case SPEED_10:
 		rgmii = (PCH_GBE_RGMII_RATE_2_5M |
@@ -1060,10 +1055,6 @@ static void pch_gbe_set_rgmii_ctrl(struct pch_gbe_adapter *adapter, u16 speed,
 		break;
 	}
 	iowrite32(rgmii, &hw->reg->RGMII_CTRL);
-#else	/* GMII */
-	rgmii = 0;
-	iowrite32(rgmii, &hw->reg->RGMII_CTRL);
-#endif
 }
 static void pch_gbe_set_mode(struct pch_gbe_adapter *adapter, u16 speed,
 			      u16 duplex)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
index efb955be8cac..23ac38711619 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
@@ -21,7 +21,6 @@
 
 #define PCH_GBE_PHY_REGS_LEN		32
 #define	PCH_GBE_PHY_RESET_DELAY_US	10
-#define PCH_GBE_MAC_IFOP_RGMII
 
 s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw);
 s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data);
-- 
cgit v1.2.3-55-g7522


From 90e3f637eb4d2e1fdb6a799e758a21c2a4e20a1d Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:50 -0700
Subject: net: pch_gbe: Remove dead RINGFREE code

The pch_gbe driver includes some code which appears to be an attempt to
work around a problem with the pch_gbe_free_rx_resources &
pch_gbe_free_tx_resources functions that no longer exists. Remove the
code guarded by the never-defined RINGFREE preprocessor macro.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c | 13 -------------
 1 file changed, 13 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
index a7bdb53790ff..adaa0024adfe 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
@@ -349,25 +349,12 @@ static int pch_gbe_set_ringparam(struct net_device *netdev,
 		err = pch_gbe_setup_tx_resources(adapter, adapter->tx_ring);
 		if (err)
 			goto err_setup_tx;
-		/* save the new, restore the old in order to free it,
-		 * then restore the new back again */
-#ifdef RINGFREE
-		adapter->rx_ring = rx_old;
-		adapter->tx_ring = tx_old;
-		pch_gbe_free_rx_resources(adapter, adapter->rx_ring);
-		pch_gbe_free_tx_resources(adapter, adapter->tx_ring);
-		kfree(tx_old);
-		kfree(rx_old);
-		adapter->rx_ring = rxdr;
-		adapter->tx_ring = txdr;
-#else
 		pch_gbe_free_rx_resources(adapter, rx_old);
 		pch_gbe_free_tx_resources(adapter, tx_old);
 		kfree(tx_old);
 		kfree(rx_old);
 		adapter->rx_ring = rxdr;
 		adapter->tx_ring = txdr;
-#endif
 		err = pch_gbe_up(adapter);
 	}
 	return err;
-- 
cgit v1.2.3-55-g7522


From 99a9c28863ccccf25f6e95c5b38cb6884d922a7f Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:51 -0700
Subject: net: pch_gbe: Use module_pci_driver()

Make use of the module_pci_driver() macro to remove some needless
boilerplate code from the pch_gbe driver. This does have the side effect
of removing the print of the driver's version during probe, but this is
pretty useless information anyway - the version has changed only once
whilst the driver has been in mainline, despite many changes being made
to it before and since.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 11c42aa42b8a..3f2dd36d45ad 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2770,24 +2770,7 @@ static struct pci_driver pch_gbe_driver = {
 	.shutdown = pch_gbe_shutdown,
 	.err_handler = &pch_gbe_err_handler
 };
-
-
-static int __init pch_gbe_init_module(void)
-{
-	int ret;
-
-	pr_info("EG20T PCH Gigabit Ethernet Driver - version %s\n",DRV_VERSION);
-	ret = pci_register_driver(&pch_gbe_driver);
-	return ret;
-}
-
-static void __exit pch_gbe_exit_module(void)
-{
-	pci_unregister_driver(&pch_gbe_driver);
-}
-
-module_init(pch_gbe_init_module);
-module_exit(pch_gbe_exit_module);
+module_pci_driver(pch_gbe_driver);
 
 MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
 MODULE_AUTHOR("LAPIS SEMICONDUCTOR, <tshimizu818@gmail.com>");
-- 
cgit v1.2.3-55-g7522


From 6ab91e47694e03775bbe874fa8f15f84db404c00 Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:52 -0700
Subject: net: pch_gbe: Inline pch_gbe_mac_mc_addr_list_update

The pch_gbe driver sets up multicast address filters using a convoluted
mechanism by which pch_gbe_set_multi allocates an array to hold
multicast addresses, copies desired addresses into that array, calls a
pch_gbe_mac_mc_addr_list_update function which copies addresses out of
that array into MAC registers, then frees the array.

This patch simplifies this somewhat by inlining
pch_gbe_mac_mc_addr_list_update into pch_gbe_set_multi, and removing the
requirement for the MAC addresses to stored consecutively in a single
array.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 73 ++++++----------------
 1 file changed, 19 insertions(+), 54 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 3f2dd36d45ad..dc8c4050fad3 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -411,44 +411,6 @@ static void pch_gbe_mac_init_rx_addrs(struct pch_gbe_hw *hw, u16 mar_count)
 	pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
 }
 
-
-/**
- * pch_gbe_mac_mc_addr_list_update - Update Multicast addresses
- * @hw:	            Pointer to the HW structure
- * @mc_addr_list:   Array of multicast addresses to program
- * @mc_addr_count:  Number of multicast addresses to program
- * @mar_used_count: The first MAC Address register free to program
- * @mar_total_num:  Total number of supported MAC Address Registers
- */
-static void pch_gbe_mac_mc_addr_list_update(struct pch_gbe_hw *hw,
-					    u8 *mc_addr_list, u32 mc_addr_count,
-					    u32 mar_used_count, u32 mar_total_num)
-{
-	u32 i, adrmask;
-
-	/* Load the first set of multicast addresses into the exact
-	 * filters (RAR).  If there are not enough to fill the RAR
-	 * array, clear the filters.
-	 */
-	for (i = mar_used_count; i < mar_total_num; i++) {
-		if (mc_addr_count) {
-			pch_gbe_mac_mar_set(hw, mc_addr_list, i);
-			mc_addr_count--;
-			mc_addr_list += ETH_ALEN;
-		} else {
-			/* Clear MAC address mask */
-			adrmask = ioread32(&hw->reg->ADDR_MASK);
-			iowrite32((adrmask | (0x0001 << i)),
-					&hw->reg->ADDR_MASK);
-			/* wait busy */
-			pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
-			/* Clear MAC address */
-			iowrite32(0, &hw->reg->mac_adr[i].high);
-			iowrite32(0, &hw->reg->mac_adr[i].low);
-		}
-	}
-}
-
 /**
  * pch_gbe_mac_force_mac_fc - Force the MAC's flow control settings
  * @hw:	            Pointer to the HW structure
@@ -2143,10 +2105,8 @@ static void pch_gbe_set_multi(struct net_device *netdev)
 	struct pch_gbe_adapter *adapter = netdev_priv(netdev);
 	struct pch_gbe_hw *hw = &adapter->hw;
 	struct netdev_hw_addr *ha;
-	u8 *mta_list;
-	u32 rctl;
-	int i;
-	int mc_count;
+	u32 rctl, adrmask;
+	int mc_count, i;
 
 	netdev_dbg(netdev, "netdev->flags : 0x%08x\n", netdev->flags);
 
@@ -2173,20 +2133,25 @@ static void pch_gbe_set_multi(struct net_device *netdev)
 
 	if (mc_count >= PCH_GBE_MAR_ENTRIES)
 		return;
-	mta_list = kmalloc_array(ETH_ALEN, mc_count, GFP_ATOMIC);
-	if (!mta_list)
-		return;
 
-	/* The shared function expects a packed array of only addresses. */
-	i = 0;
-	netdev_for_each_mc_addr(ha, netdev) {
-		if (i == mc_count)
-			break;
-		memcpy(mta_list + (i++ * ETH_ALEN), &ha->addr, ETH_ALEN);
+	/* Load the first set of multicast addresses into MAC address registers
+	 * for use by hardware filtering.
+	 */
+	i = 1;
+	netdev_for_each_mc_addr(ha, netdev)
+		pch_gbe_mac_mar_set(hw, ha->addr, i++);
+
+	/* If there are spare MAC registers, mask & clear them */
+	for (; i < PCH_GBE_MAR_ENTRIES; i++) {
+		/* Clear MAC address mask */
+		adrmask = ioread32(&hw->reg->ADDR_MASK);
+		iowrite32(adrmask | BIT(i), &hw->reg->ADDR_MASK);
+		/* wait busy */
+		pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
+		/* Clear MAC address */
+		iowrite32(0, &hw->reg->mac_adr[i].high);
+		iowrite32(0, &hw->reg->mac_adr[i].low);
 	}
-	pch_gbe_mac_mc_addr_list_update(hw, mta_list, i, 1,
-					PCH_GBE_MAR_ENTRIES);
-	kfree(mta_list);
 
 	netdev_dbg(netdev,
 		 "RX_MODE reg(check bit31,30 ADD,MLT) : 0x%08x  netdev->mc_count : 0x%08x\n",
-- 
cgit v1.2.3-55-g7522


From 418e7dab0f83fcef4f3cb1ae5b1c02ee83b8e26c Mon Sep 17 00:00:00 2001
From: Paul Burton
Date: Fri, 22 Jun 2018 20:17:53 -0700
Subject: net: pch_gbe: Clean up pch_gbe_set_multi

Refactor pch_gbe_set_multi in order to avoid unnecessary indentation &
make it clearer what the code is doing.

The one behavioral change from this patch is that we'll no longer
configure the MAC address registers for multicast addresses when the
IFF_PROMISC or IFF_ALLMULTI flags are set. In these cases, just as when
we want to monitor more multicast addresses than we have MAC address
registers, we disable multicast filtering so the MAC address registers
are unused.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 33 +++++++++++-----------
 1 file changed, 16 insertions(+), 17 deletions(-)

(limited to 'drivers/net/ethernet/oki-semi')

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index dc8c4050fad3..43c0c10dfeb7 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2110,28 +2110,27 @@ static void pch_gbe_set_multi(struct net_device *netdev)
 
 	netdev_dbg(netdev, "netdev->flags : 0x%08x\n", netdev->flags);
 
-	/* Check for Promiscuous and All Multicast modes */
+	/* By default enable address & multicast filtering */
 	rctl = ioread32(&hw->reg->RX_MODE);
+	rctl |= PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN;
+
+	/* Promiscuous mode disables all hardware address filtering */
+	if (netdev->flags & IFF_PROMISC)
+		rctl &= ~(PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN);
+
+	/* If we want to monitor more multicast addresses than the hardware can
+	 * support then disable hardware multicast filtering.
+	 */
 	mc_count = netdev_mc_count(netdev);
-	if ((netdev->flags & IFF_PROMISC)) {
-		rctl &= ~PCH_GBE_ADD_FIL_EN;
+	if ((netdev->flags & IFF_ALLMULTI) || mc_count >= PCH_GBE_MAR_ENTRIES)
 		rctl &= ~PCH_GBE_MLT_FIL_EN;
-	} else if ((netdev->flags & IFF_ALLMULTI)) {
-		/* all the multicasting receive permissions */
-		rctl |= PCH_GBE_ADD_FIL_EN;
-		rctl &= ~PCH_GBE_MLT_FIL_EN;
-	} else {
-		if (mc_count >= PCH_GBE_MAR_ENTRIES) {
-			/* all the multicasting receive permissions */
-			rctl |= PCH_GBE_ADD_FIL_EN;
-			rctl &= ~PCH_GBE_MLT_FIL_EN;
-		} else {
-			rctl |= (PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN);
-		}
-	}
+
 	iowrite32(rctl, &hw->reg->RX_MODE);
 
-	if (mc_count >= PCH_GBE_MAR_ENTRIES)
+	/* If we're not using multicast filtering then there's no point
+	 * configuring the unused MAC address registers.
+	 */
+	if (!(rctl & PCH_GBE_MLT_FIL_EN))
 		return;
 
 	/* Load the first set of multicast addresses into MAC address registers
-- 
cgit v1.2.3-55-g7522