From df23acaa5d3239745805650e2f27a4252182c063 Mon Sep 17 00:00:00 2001 From: Luis R. Rodriguez Date: Thu, 15 Apr 2010 17:39:11 -0400 Subject: ath9k_hw: complete AR9003 calibration This goes with some new shiny TX IQ calibration that AR9003 hardware family supports. Signed-off-by: Luis R. Rodriguez Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 100 ++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) (limited to 'drivers/net/wireless/ath/ath9k/ar9003_phy.c') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 67b3b6518436..fee07fd7a595 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -814,6 +814,105 @@ void ar9003_hw_set_nf_limits(struct ath_hw *ah) ah->nf_5g_min = AR_PHY_CCA_MIN_GOOD_VAL_9300_5GHZ; } +/* + * Find out which of the RX chains are enabled + */ +static u32 ar9003_hw_get_rx_chainmask(struct ath_hw *ah) +{ + u32 chain = REG_READ(ah, AR_PHY_RX_CHAINMASK); + /* + * The bits [2:0] indicate the rx chain mask and are to be + * interpreted as follows: + * 00x => Only chain 0 is enabled + * 01x => Chain 1 and 0 enabled + * 1xx => Chain 2,1 and 0 enabled + */ + return chain & 0x7; +} + +static void ar9003_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) +{ + struct ath9k_nfcal_hist *h; + unsigned i, j; + int32_t val; + const u32 ar9300_cca_regs[6] = { + AR_PHY_CCA_0, + AR_PHY_CCA_1, + AR_PHY_CCA_2, + AR_PHY_EXT_CCA, + AR_PHY_EXT_CCA_1, + AR_PHY_EXT_CCA_2, + }; + u8 chainmask, rx_chain_status; + struct ath_common *common = ath9k_hw_common(ah); + + rx_chain_status = ar9003_hw_get_rx_chainmask(ah); + + chainmask = 0x3F; + h = ah->nfCalHist; + + for (i = 0; i < NUM_NF_READINGS; i++) { + if (chainmask & (1 << i)) { + val = REG_READ(ah, ar9300_cca_regs[i]); + val &= 0xFFFFFE00; + val |= (((u32) (h[i].privNF) << 1) & 0x1ff); + REG_WRITE(ah, ar9300_cca_regs[i], val); + } + } + + /* + * Load software filtered NF value into baseband internal minCCApwr + * variable. + */ + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_ENABLE_NF); + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_NO_UPDATE_NF); + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); + + /* + * Wait for load to complete, should be fast, a few 10s of us. + * The max delay was changed from an original 250us to 10000us + * since 250us often results in NF load timeout and causes deaf + * condition during stress testing 12/12/2009 + */ + for (j = 0; j < 1000; j++) { + if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & + AR_PHY_AGC_CONTROL_NF) == 0) + break; + udelay(10); + } + + /* + * We timed out waiting for the noisefloor to load, probably due to an + * in-progress rx. Simply return here and allow the load plenty of time + * to complete before the next calibration interval. We need to avoid + * trying to load -50 (which happens below) while the previous load is + * still in progress as this can cause rx deafness. Instead by returning + * here, the baseband nf cal will just be capped by our present + * noisefloor until the next calibration timer. + */ + if (j == 1000) { + ath_print(common, ATH_DBG_ANY, "Timeout while waiting for nf " + "to load: AR_PHY_AGC_CONTROL=0x%x\n", + REG_READ(ah, AR_PHY_AGC_CONTROL)); + } + + /* + * Restore maxCCAPower register parameter again so that we're not capped + * by the median we just loaded. This will be initial (and max) value + * of next noise floor calibration the baseband does. + */ + for (i = 0; i < NUM_NF_READINGS; i++) { + if (chainmask & (1 << i)) { + val = REG_READ(ah, ar9300_cca_regs[i]); + val &= 0xFFFFFE00; + val |= (((u32) (-50) << 1) & 0x1ff); + REG_WRITE(ah, ar9300_cca_regs[i], val); + } + } +} + void ar9003_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); @@ -833,4 +932,5 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) priv_ops->set_diversity = ar9003_hw_set_diversity; priv_ops->ani_control = ar9003_hw_ani_control; priv_ops->do_getnf = ar9003_hw_do_getnf; + priv_ops->loadnf = ar9003_hw_loadnf; } -- cgit v1.2.3-55-g7522