From fd5d10059d5ead12dd12f05ae6d96e70d1fac3df Mon Sep 17 00:00:00 2001 From: Felix Riemann Date: Thu, 20 Jun 2019 08:45:00 +0100 Subject: regulator: da9061/62: Adjust LDO voltage selection minimum value According to the DA9061 and DA9062 datasheets the LDO voltage selection registers have a lower value of 0x02. This applies to voltage registers VLDO1_A, VLDO2_A, VLDO3_A and VLDO4_A. This linear offset of 0x02 was previously not observed by the driver, causing the LDO output voltage to be systematically lower by two steps (= 0.1V). This patch fixes the minimum linear selector offset by setting it to a value of 2 and increases the n_voltages by the same amount allowing voltages in the range 0x02 -> 0.9V to 0x38 -> 3.6V to be correctly selected. Also fixes an incorrect calculaton for the n_voltages value in the regulator LDO2. These fixes effect all LDO regulators for DA9061 and DA9062. Acked-by: Steve Twiss Tested-by: Steve Twiss Signed-off-by: Felix Riemann Signed-off-by: Steve Twiss Signed-off-by: Mark Brown --- drivers/regulator/da9062-regulator.c | 40 +++++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 16 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c index a02e0488410f..2ffc64622451 100644 --- a/drivers/regulator/da9062-regulator.c +++ b/drivers/regulator/da9062-regulator.c @@ -493,12 +493,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO1_CONT, .desc.enable_mask = DA9062AA_LDO1_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO1_A, .desc.vsel_mask = DA9062AA_VLDO1_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO1_A, __builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -525,12 +526,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (600))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO2_CONT, .desc.enable_mask = DA9062AA_LDO2_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO2_A, .desc.vsel_mask = DA9062AA_VLDO2_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO2_A, __builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -557,12 +559,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO3_CONT, .desc.enable_mask = DA9062AA_LDO3_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO3_A, .desc.vsel_mask = DA9062AA_VLDO3_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO3_A, __builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -589,12 +592,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO4_CONT, .desc.enable_mask = DA9062AA_LDO4_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO4_A, .desc.vsel_mask = DA9062AA_VLDO4_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO4_A, __builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -769,12 +773,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO1_CONT, .desc.enable_mask = DA9062AA_LDO1_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO1_A, .desc.vsel_mask = DA9062AA_VLDO1_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO1_A, __builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -801,12 +806,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (600))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO2_CONT, .desc.enable_mask = DA9062AA_LDO2_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO2_A, .desc.vsel_mask = DA9062AA_VLDO2_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO2_A, __builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -833,12 +839,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO3_CONT, .desc.enable_mask = DA9062AA_LDO3_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO3_A, .desc.vsel_mask = DA9062AA_VLDO3_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO3_A, __builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -865,12 +872,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO4_CONT, .desc.enable_mask = DA9062AA_LDO4_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO4_A, .desc.vsel_mask = DA9062AA_VLDO4_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO4_A, __builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - -- cgit v1.2.3-55-g7522