From 12f992adeb6bb1b3cc8c7190cb5b927c8ed9cc33 Mon Sep 17 00:00:00 2001 From: Anson Jacob Date: Fri, 26 Aug 2016 19:13:04 -0400 Subject: staging: comedi: cb_pcidas64: Fix commenting style Remove additional space after /* Convert single line block comment into single line comment Signed-off-by: Anson Jacob Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/cb_pcidas64.c | 431 +++++++++++++-------------- 1 file changed, 214 insertions(+), 217 deletions(-) (limited to 'drivers/staging/comedi') diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index 281dc56c75f1..ac24c10320a6 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -169,8 +169,8 @@ enum read_only_registers { }; enum read_write_registers { - I8255_4020_REG = 0x48, /* 8255 offset, for 4020 only */ - /* external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG */ + I8255_4020_REG = 0x48, /* 8255 offset, for 4020 only */ + /* external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG */ ADC_QUEUE_FIFO_REG = 0x100, ADC_FIFO_REG = 0x200, /* adc data fifo */ /* dac data fifo, has weird interactions with external channel queue */ @@ -189,51 +189,52 @@ enum dio_counter_registers { /* bit definitions for write-only registers */ enum intr_enable_contents { - ADC_INTR_SRC_MASK = 0x3, /* adc interrupt source mask */ - ADC_INTR_QFULL_BITS = 0x0, /* interrupt fifo quarter full */ - ADC_INTR_EOC_BITS = 0x1, /* interrupt end of conversion */ - ADC_INTR_EOSCAN_BITS = 0x2, /* interrupt end of scan */ - ADC_INTR_EOSEQ_BITS = 0x3, /* interrupt end of sequence mask */ - EN_ADC_INTR_SRC_BIT = 0x4, /* enable adc interrupt source */ - EN_ADC_DONE_INTR_BIT = 0x8, /* enable adc acquisition done intr */ + ADC_INTR_SRC_MASK = 0x3, /* adc interrupt source mask */ + ADC_INTR_QFULL_BITS = 0x0, /* interrupt fifo quarter full */ + ADC_INTR_EOC_BITS = 0x1, /* interrupt end of conversion */ + ADC_INTR_EOSCAN_BITS = 0x2, /* interrupt end of scan */ + ADC_INTR_EOSEQ_BITS = 0x3, /* interrupt end of sequence mask */ + EN_ADC_INTR_SRC_BIT = 0x4, /* enable adc interrupt source */ + EN_ADC_DONE_INTR_BIT = 0x8, /* enable adc acquisition done intr */ DAC_INTR_SRC_MASK = 0x30, DAC_INTR_QEMPTY_BITS = 0x0, DAC_INTR_HIGH_CHAN_BITS = 0x10, - EN_DAC_INTR_SRC_BIT = 0x40, /* enable dac interrupt source */ + EN_DAC_INTR_SRC_BIT = 0x40, /* enable dac interrupt source */ EN_DAC_DONE_INTR_BIT = 0x80, - EN_ADC_ACTIVE_INTR_BIT = 0x200, /* enable adc active interrupt */ - EN_ADC_STOP_INTR_BIT = 0x400, /* enable adc stop trigger interrupt */ - EN_DAC_ACTIVE_INTR_BIT = 0x800, /* enable dac active interrupt */ - EN_DAC_UNDERRUN_BIT = 0x4000, /* enable dac underrun status bit */ - EN_ADC_OVERRUN_BIT = 0x8000, /* enable adc overrun status bit */ + EN_ADC_ACTIVE_INTR_BIT = 0x200, /* enable adc active interrupt */ + EN_ADC_STOP_INTR_BIT = 0x400, /* enable adc stop trigger interrupt */ + EN_DAC_ACTIVE_INTR_BIT = 0x800, /* enable dac active interrupt */ + EN_DAC_UNDERRUN_BIT = 0x4000, /* enable dac underrun status bit */ + EN_ADC_OVERRUN_BIT = 0x8000, /* enable adc overrun status bit */ }; enum hw_config_contents { - MASTER_CLOCK_4020_MASK = 0x3, /* master clock source mask for 4020 */ - INTERNAL_CLOCK_4020_BITS = 0x1, /* use 40 MHz internal master clock */ - BNC_CLOCK_4020_BITS = 0x2, /* use BNC input for master clock */ - EXT_CLOCK_4020_BITS = 0x3, /* use dio input for master clock */ - EXT_QUEUE_BIT = 0x200, /* use external channel/gain queue */ - /* use 225 nanosec strobe when loading dac instead of 50 nanosec */ + MASTER_CLOCK_4020_MASK = 0x3, /* master clock source mask for 4020 */ + INTERNAL_CLOCK_4020_BITS = 0x1, /* use 40 MHz internal master clock */ + BNC_CLOCK_4020_BITS = 0x2, /* use BNC input for master clock */ + EXT_CLOCK_4020_BITS = 0x3, /* use dio input for master clock */ + EXT_QUEUE_BIT = 0x200, /* use external channel/gain queue */ + /* use 225 nanosec strobe when loading dac instead of 50 nanosec */ SLOW_DAC_BIT = 0x400, - /* bit with unknown function yet given as default value in pci-das64 - * manual + /* + * bit with unknown function yet given as default value in pci-das64 + * manual */ HW_CONFIG_DUMMY_BITS = 0x2000, - /* bit selects channels 1/0 for analog input/output, otherwise 0/1 */ + /* bit selects channels 1/0 for analog input/output, otherwise 0/1 */ DMA_CH_SELECT_BIT = 0x8000, - FIFO_SIZE_REG = 0x4, /* allows adjustment of fifo sizes */ - DAC_FIFO_SIZE_MASK = 0xff00, /* bits that set dac fifo size */ - DAC_FIFO_BITS = 0xf800, /* 8k sample ao fifo */ + FIFO_SIZE_REG = 0x4, /* allows adjustment of fifo sizes */ + DAC_FIFO_SIZE_MASK = 0xff00, /* bits that set dac fifo size */ + DAC_FIFO_BITS = 0xf800, /* 8k sample ao fifo */ }; #define DAC_FIFO_SIZE 0x2000 enum daq_atrig_low_4020_contents { - /* use trig/ext clk bnc input for analog gate signal */ + /* use trig/ext clk bnc input for analog gate signal */ EXT_AGATE_BNC_BIT = 0x8000, - /* use trig/ext clk bnc input for external stop trigger signal */ + /* use trig/ext clk bnc input for external stop trigger signal */ EXT_STOP_TRIG_BNC_BIT = 0x4000, - /* use trig/ext clk bnc input for external start trigger signal */ + /* use trig/ext clk bnc input for external start trigger signal */ EXT_START_TRIG_BNC_BIT = 0x2000, }; @@ -243,38 +244,38 @@ static inline uint16_t analog_trig_low_threshold_bits(uint16_t threshold) } enum adc_control0_contents { - ADC_GATE_SRC_MASK = 0x3, /* bits that select gate */ - ADC_SOFT_GATE_BITS = 0x1, /* software gate */ - ADC_EXT_GATE_BITS = 0x2, /* external digital gate */ - ADC_ANALOG_GATE_BITS = 0x3, /* analog level gate */ - /* level-sensitive gate (for digital) */ + ADC_GATE_SRC_MASK = 0x3, /* bits that select gate */ + ADC_SOFT_GATE_BITS = 0x1, /* software gate */ + ADC_EXT_GATE_BITS = 0x2, /* external digital gate */ + ADC_ANALOG_GATE_BITS = 0x3, /* analog level gate */ + /* level-sensitive gate (for digital) */ ADC_GATE_LEVEL_BIT = 0x4, - ADC_GATE_POLARITY_BIT = 0x8, /* gate active low */ + ADC_GATE_POLARITY_BIT = 0x8, /* gate active low */ ADC_START_TRIG_SOFT_BITS = 0x10, ADC_START_TRIG_EXT_BITS = 0x20, ADC_START_TRIG_ANALOG_BITS = 0x30, ADC_START_TRIG_MASK = 0x30, - ADC_START_TRIG_FALLING_BIT = 0x40, /* trig 1 uses falling edge */ - /* external pacing uses falling edge */ + ADC_START_TRIG_FALLING_BIT = 0x40, /* trig 1 uses falling edge */ + /* external pacing uses falling edge */ ADC_EXT_CONV_FALLING_BIT = 0x800, - /* enable hardware scan counter */ + /* enable hardware scan counter */ ADC_SAMPLE_COUNTER_EN_BIT = 0x1000, - ADC_DMA_DISABLE_BIT = 0x4000, /* disables dma */ - ADC_ENABLE_BIT = 0x8000, /* master adc enable */ + ADC_DMA_DISABLE_BIT = 0x4000, /* disables dma */ + ADC_ENABLE_BIT = 0x8000, /* master adc enable */ }; enum adc_control1_contents { - /* should be set for boards with > 16 channels */ + /* should be set for boards with > 16 channels */ ADC_QUEUE_CONFIG_BIT = 0x1, CONVERT_POLARITY_BIT = 0x10, EOC_POLARITY_BIT = 0x20, - ADC_SW_GATE_BIT = 0x40, /* software gate of adc */ - ADC_DITHER_BIT = 0x200, /* turn on extra noise for dithering */ + ADC_SW_GATE_BIT = 0x40, /* software gate of adc */ + ADC_DITHER_BIT = 0x200, /* turn on extra noise for dithering */ RETRIGGER_BIT = 0x800, ADC_LO_CHANNEL_4020_MASK = 0x300, ADC_HI_CHANNEL_4020_MASK = 0xc00, - TWO_CHANNEL_4020_BITS = 0x1000, /* two channel mode for 4020 */ - FOUR_CHANNEL_4020_BITS = 0x2000, /* four channel mode for 4020 */ + TWO_CHANNEL_4020_BITS = 0x1000, /* two channel mode for 4020 */ + FOUR_CHANNEL_4020_BITS = 0x2000, /* four channel mode for 4020 */ CHANNEL_MODE_4020_MASK = 0x3000, ADC_MODE_MASK = 0xf000, }; @@ -298,10 +299,10 @@ enum calibration_contents { SELECT_8800_BIT = 0x1, SELECT_8402_64XX_BIT = 0x2, SELECT_1590_60XX_BIT = 0x2, - CAL_EN_64XX_BIT = 0x40, /* calibration enable for 64xx series */ + CAL_EN_64XX_BIT = 0x40, /* calibration enable for 64xx series */ SERIAL_DATA_IN_BIT = 0x80, SERIAL_CLOCK_BIT = 0x100, - CAL_EN_60XX_BIT = 0x200, /* calibration enable for 60xx series */ + CAL_EN_60XX_BIT = 0x200, /* calibration enable for 60xx series */ CAL_GAIN_BIT = 0x800, }; @@ -328,12 +329,12 @@ static inline uint16_t adc_convert_chan_4020_bits(unsigned int channel) }; enum adc_queue_load_contents { - UNIP_BIT = 0x800, /* unipolar/bipolar bit */ - ADC_SE_DIFF_BIT = 0x1000, /* single-ended/ differential bit */ - /* non-referenced single-ended (common-mode input) */ + UNIP_BIT = 0x800, /* unipolar/bipolar bit */ + ADC_SE_DIFF_BIT = 0x1000, /* single-ended/ differential bit */ + /* non-referenced single-ended (common-mode input) */ ADC_COMMON_BIT = 0x2000, - QUEUE_EOSEQ_BIT = 0x4000, /* queue end of sequence */ - QUEUE_EOSCAN_BIT = 0x8000, /* queue end of scan */ + QUEUE_EOSEQ_BIT = 0x4000, /* queue end of sequence */ + QUEUE_EOSCAN_BIT = 0x8000, /* queue end of scan */ }; static inline uint16_t adc_chan_bits(unsigned int channel) @@ -342,7 +343,7 @@ static inline uint16_t adc_chan_bits(unsigned int channel) }; enum dac_control0_contents { - DAC_ENABLE_BIT = 0x8000, /* dac controller enable bit */ + DAC_ENABLE_BIT = 0x8000, /* dac controller enable bit */ DAC_CYCLIC_STOP_BIT = 0x4000, DAC_WAVEFORM_MODE_BIT = 0x100, DAC_EXT_UPDATE_FALLING_BIT = 0x80, @@ -362,7 +363,7 @@ enum dac_control1_contents { DAC_WRITE_POLARITY_BIT = 0x800, /* board-dependent setting */ DAC1_EXT_REF_BIT = 0x200, DAC0_EXT_REF_BIT = 0x100, - DAC_OUTPUT_ENABLE_BIT = 0x80, /* dac output enable bit */ + DAC_OUTPUT_ENABLE_BIT = 0x80, /* dac output enable bit */ DAC_UPDATE_POLARITY_BIT = 0x40, /* board-dependent setting */ DAC_SW_GATE_BIT = 0x20, DAC1_UNIPOLAR_BIT = 0x8, @@ -411,9 +412,9 @@ enum i2c_addresses { }; enum range_cal_i2c_contents { - /* bits that set what source the adc converter measures */ + /* bits that set what source the adc converter measures */ ADC_SRC_4020_MASK = 0x70, - /* make bnc trig/ext clock threshold 0V instead of 2.5V */ + /* make bnc trig/ext clock threshold 0V instead of 2.5V */ BNC_TRIG_THRESHOLD_0V_BIT = 0x80, }; @@ -424,7 +425,7 @@ static inline uint8_t adc_src_4020_bits(unsigned int source) static inline uint8_t attenuate_bit(unsigned int channel) { - /* attenuate channel (+-5V input range) */ + /* attenuate channel (+-5V input range) */ return 1 << (channel & 0x3); }; @@ -629,18 +630,18 @@ enum pcidas64_boardid { struct pcidas64_board { const char *name; - int ai_se_chans; /* number of ai inputs in single-ended mode */ - int ai_bits; /* analog input resolution */ - int ai_speed; /* fastest conversion period in ns */ + int ai_se_chans; /* number of ai inputs in single-ended mode */ + int ai_bits; /* analog input resolution */ + int ai_speed; /* fastest conversion period in ns */ const struct comedi_lrange *ai_range_table; const uint8_t *ai_range_code; - int ao_nchan; /* number of analog out channels */ - int ao_bits; /* analog output resolution */ - int ao_scan_speed; /* analog output scan speed */ + int ao_nchan; /* number of analog out channels */ + int ao_bits; /* analog output resolution */ + int ao_scan_speed; /* analog output scan speed */ const struct comedi_lrange *ao_range_table; const int *ao_range_code; const struct hw_fifo_info *const ai_fifo; - /* different board families have slightly different registers */ + /* different board families have slightly different registers */ enum register_layout layout; unsigned has_8255:1; }; @@ -701,7 +702,7 @@ static const struct pcidas64_board pcidas64_boards[] = { .has_8255 = 1, }, [BOARD_PCIDAS6402_12] = { - .name = "pci-das6402/12", /* XXX check */ + .name = "pci-das6402/12", /* XXX check */ .ai_se_chans = 64, .ai_bits = 12, .ai_speed = 5000, @@ -998,7 +999,7 @@ static const struct pcidas64_board pcidas64_boards[] = { .ai_speed = 50, .ao_bits = 12, .ao_nchan = 2, - .ao_scan_speed = 0, /* no hardware pacing on ao */ + .ao_scan_speed = 0, /* no hardware pacing on ao */ .layout = LAYOUT_4020, .ai_range_table = &ai_ranges_4020, .ao_range_table = &ao_ranges_4020, @@ -1007,9 +1008,7 @@ static const struct pcidas64_board pcidas64_boards[] = { .has_8255 = 1, }, #if 0 - /* - * The device id for these boards is unknown - */ + /* The device id for these boards is unknown */ [BOARD_PCIDAS6402_16_JR] = { .name = "pci-das6402/16/jr", @@ -1118,64 +1117,66 @@ static inline unsigned short se_diff_bit_6xxx(struct comedi_device *dev, } struct ext_clock_info { - /* master clock divisor to use for scans with external master clock */ + /* master clock divisor to use for scans with external master clock */ unsigned int divisor; - /* chanspec for master clock input when used as scan begin src */ + /* chanspec for master clock input when used as scan begin src */ unsigned int chanspec; }; /* this structure is for data unique to this hardware driver. */ struct pcidas64_private { - /* base addresses (physical) */ + /* base addresses (physical) */ resource_size_t main_phys_iobase; resource_size_t dio_counter_phys_iobase; - /* base addresses (ioremapped) */ + /* base addresses (ioremapped) */ void __iomem *plx9080_iobase; void __iomem *main_iobase; - /* local address (used by dma controller) */ + /* local address (used by dma controller) */ uint32_t local0_iobase; uint32_t local1_iobase; - /* dma buffers for analog input */ + /* dma buffers for analog input */ uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT]; - /* physical addresses of ai dma buffers */ + /* physical addresses of ai dma buffers */ dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT]; - /* array of ai dma descriptors read by plx9080, - * allocated to get proper alignment + /* + * array of ai dma descriptors read by plx9080, + * allocated to get proper alignment */ struct plx_dma_desc *ai_dma_desc; - /* physical address of ai dma descriptor array */ + /* physical address of ai dma descriptor array */ dma_addr_t ai_dma_desc_bus_addr; - /* index of the ai dma descriptor/buffer - * that is currently being used + /* + * index of the ai dma descriptor/buffer + * that is currently being used */ unsigned int ai_dma_index; - /* dma buffers for analog output */ + /* dma buffers for analog output */ uint16_t *ao_buffer[AO_DMA_RING_COUNT]; - /* physical addresses of ao dma buffers */ + /* physical addresses of ao dma buffers */ dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT]; struct plx_dma_desc *ao_dma_desc; dma_addr_t ao_dma_desc_bus_addr; - /* keeps track of buffer where the next ao sample should go */ + /* keeps track of buffer where the next ao sample should go */ unsigned int ao_dma_index; - unsigned int hw_revision; /* stc chip hardware revision number */ - /* last bits sent to INTR_ENABLE_REG register */ + unsigned int hw_revision; /* stc chip hardware revision number */ + /* last bits sent to INTR_ENABLE_REG register */ unsigned int intr_enable_bits; - /* last bits sent to ADC_CONTROL1_REG register */ + /* last bits sent to ADC_CONTROL1_REG register */ uint16_t adc_control1_bits; - /* last bits sent to FIFO_SIZE_REG register */ + /* last bits sent to FIFO_SIZE_REG register */ uint16_t fifo_size_bits; - /* last bits sent to HW_CONFIG_REG register */ + /* last bits sent to HW_CONFIG_REG register */ uint16_t hw_config_bits; uint16_t dac_control1_bits; - /* last bits written to plx9080 control register */ + /* last bits written to plx9080 control register */ uint32_t plx_control_bits; - /* last bits written to plx interrupt control and status register */ + /* last bits written to plx interrupt control and status register */ uint32_t plx_intcsr_bits; - /* index of calibration source readable through ai ch0 */ + /* index of calibration source readable through ai ch0 */ int calibration_source; - /* bits written to i2c calibration/range register */ + /* bits written to i2c calibration/range register */ uint8_t i2c_cal_range_bits; - /* configure digital triggers to trigger on falling edge */ + /* configure digital triggers to trigger on falling edge */ unsigned int ext_trig_falling; short ai_cmd_running; unsigned int ai_fifo_segment_length; @@ -1228,7 +1229,7 @@ static void abort_dma(struct comedi_device *dev, unsigned int channel) struct pcidas64_private *devpriv = dev->private; unsigned long flags; - /* spinlock for plx dma control/status reg */ + /* spinlock for plx dma control/status reg */ spin_lock_irqsave(&dev->spinlock, flags); plx9080_abort_dma(devpriv->plx9080_iobase, channel); @@ -1275,7 +1276,7 @@ static void enable_ai_interrupts(struct comedi_device *dev, * if CMDF_WAKE_EOS flag is set. */ if (cmd->flags & CMDF_WAKE_EOS) { - /* 4020 doesn't support pio transfers except for fifo dregs */ + /* 4020 doesn't support pio transfers except for fifo dregs */ if (board->layout != LAYOUT_4020) bits |= ADC_INTR_EOSCAN_BITS | EN_ADC_INTR_SRC_BIT; } @@ -1309,38 +1310,40 @@ static void init_plx9080(struct comedi_device *dev) abort_dma(dev, 0); abort_dma(dev, 1); - /* configure dma0 mode */ + /* configure dma0 mode */ bits = 0; - /* enable ready input, not sure if this is necessary */ + /* enable ready input, not sure if this is necessary */ bits |= PLX_DMAMODE_READYIEN; - /* enable bterm, not sure if this is necessary */ + /* enable bterm, not sure if this is necessary */ bits |= PLX_DMAMODE_BTERMIEN; - /* enable dma chaining */ + /* enable dma chaining */ bits |= PLX_DMAMODE_CHAINEN; - /* enable interrupt on dma done - * (probably don't need this, since chain never finishes) + /* + * enable interrupt on dma done + * (probably don't need this, since chain never finishes) */ bits |= PLX_DMAMODE_DONEIEN; - /* don't increment local address during transfers - * (we are transferring from a fixed fifo register) + /* + * don't increment local address during transfers + * (we are transferring from a fixed fifo register) */ bits |= PLX_DMAMODE_LACONST; - /* route dma interrupt to pci bus */ + /* route dma interrupt to pci bus */ bits |= PLX_DMAMODE_INTRPCI; - /* enable demand mode */ + /* enable demand mode */ bits |= PLX_DMAMODE_DEMAND; - /* enable local burst mode */ + /* enable local burst mode */ bits |= PLX_DMAMODE_BURSTEN; - /* 4020 uses 32 bit dma */ + /* 4020 uses 32 bit dma */ if (board->layout == LAYOUT_4020) bits |= PLX_DMAMODE_WIDTH_32; - else /* localspace0 bus is 16 bits wide */ + else /* localspace0 bus is 16 bits wide */ bits |= PLX_DMAMODE_WIDTH_16; writel(bits, plx_iobase + PLX_REG_DMAMODE1); if (ao_cmd_is_supported(board)) writel(bits, plx_iobase + PLX_REG_DMAMODE0); - /* enable interrupts on plx 9080 */ + /* enable interrupts on plx 9080 */ devpriv->plx_intcsr_bits |= PLX_INTCSR_LSEABORTEN | PLX_INTCSR_LSEPARITYEN | PLX_INTCSR_PIEN | PLX_INTCSR_PLIEN | PLX_INTCSR_PABORTIEN | PLX_INTCSR_LIOEN | @@ -1382,7 +1385,7 @@ static int set_ai_fifo_segment_length(struct comedi_device *dev, if (num_entries > fifo->max_segment_length) num_entries = fifo->max_segment_length; - /* 1 == 256 entries, 2 == 512 entries, etc */ + /* 1 == 256 entries, 2 == 512 entries, etc */ num_increments = DIV_ROUND_CLOSEST(num_entries, increment_size); bits = (~(num_increments - 1)) & fifo->fifo_size_reg_mask; @@ -1448,7 +1451,7 @@ static void init_stc_registers(struct comedi_device *dev) writew(devpriv->adc_control1_bits, devpriv->main_iobase + ADC_CONTROL1_REG); - /* 6402/16 manual says this register must be initialized to 0xff? */ + /* 6402/16 manual says this register must be initialized to 0xff? */ writew(0xff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); bits = SLOW_DAC_BIT | DMA_CH_SELECT_BIT; @@ -1463,7 +1466,7 @@ static void init_stc_registers(struct comedi_device *dev) spin_unlock_irqrestore(&dev->spinlock, flags); - /* set fifos to maximum size */ + /* set fifos to maximum size */ devpriv->fifo_size_bits |= DAC_FIFO_BITS; set_ai_fifo_segment_length(dev, board->ai_fifo->max_segment_length); @@ -1484,7 +1487,7 @@ static int alloc_and_init_dma_members(struct comedi_device *dev) struct pcidas64_private *devpriv = dev->private; int i; - /* allocate pci dma buffers */ + /* allocate pci dma buffers */ for (i = 0; i < ai_dma_ring_count(board); i++) { devpriv->ai_buffer[i] = dma_alloc_coherent(&pcidev->dev, DMA_BUFFER_SIZE, @@ -1505,7 +1508,7 @@ static int alloc_and_init_dma_members(struct comedi_device *dev) return -ENOMEM; } } - /* allocate dma descriptors */ + /* allocate dma descriptors */ devpriv->ai_dma_desc = dma_alloc_coherent(&pcidev->dev, sizeof(struct plx_dma_desc) * ai_dma_ring_count(board), @@ -1523,7 +1526,7 @@ static int alloc_and_init_dma_members(struct comedi_device *dev) if (!devpriv->ao_dma_desc) return -ENOMEM; } - /* initialize dma descriptors */ + /* initialize dma descriptors */ for (i = 0; i < ai_dma_ring_count(board); i++) { devpriv->ai_dma_desc[i].pci_start_addr = cpu_to_le32(devpriv->ai_buffer_bus_addr[i]); @@ -1624,13 +1627,11 @@ static void i2c_set_sda(struct comedi_device *dev, int state) void __iomem *plx_control_addr = devpriv->plx9080_iobase + PLX_REG_CNTRL; - if (state) { - /* set data line high */ + if (state) { /* set data line high */ devpriv->plx_control_bits &= ~data_bit; writel(devpriv->plx_control_bits, plx_control_addr); udelay(i2c_high_udelay); - } else { /* set data line low */ - + } else { /* set data line low */ devpriv->plx_control_bits |= data_bit; writel(devpriv->plx_control_bits, plx_control_addr); udelay(i2c_low_udelay); @@ -1645,13 +1646,11 @@ static void i2c_set_scl(struct comedi_device *dev, int state) void __iomem *plx_control_addr = devpriv->plx9080_iobase + PLX_REG_CNTRL; - if (state) { - /* set clock line high */ + if (state) { /* set clock line high */ devpriv->plx_control_bits &= ~clock_bit; writel(devpriv->plx_control_bits, plx_control_addr); udelay(i2c_high_udelay); - } else { /* set clock line low */ - + } else { /* set clock line low */ devpriv->plx_control_bits |= clock_bit; writel(devpriv->plx_control_bits, plx_control_addr); udelay(i2c_low_udelay); @@ -1680,7 +1679,7 @@ static int i2c_read_ack(struct comedi_device *dev) i2c_set_sda(dev, 1); i2c_set_scl(dev, 1); - return 0; /* return fake acknowledge bit */ + return 0; /* return fake acknowledge bit */ } /* send start bit */ @@ -1713,23 +1712,23 @@ static void i2c_write(struct comedi_device *dev, unsigned int address, * eeprom and i2c bus */ - /* make sure we dont send anything to eeprom */ + /* make sure we dont send anything to eeprom */ devpriv->plx_control_bits &= ~PLX_CNTRL_EECS; i2c_stop(dev); i2c_start(dev); - /* send address and write bit */ + /* send address and write bit */ bitstream = (address << 1) & ~read_bit; i2c_write_byte(dev, bitstream); - /* get acknowledge */ + /* get acknowledge */ if (i2c_read_ack(dev) != 0) { dev_err(dev->class_dev, "failed: no acknowledge\n"); i2c_stop(dev); return; } - /* write data bytes */ + /* write data bytes */ for (i = 0; i < length; i++) { i2c_write_byte(dev, data[i]); if (i2c_read_ack(dev) != 0) { @@ -1776,8 +1775,8 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, range = CR_RANGE(insn->chanspec); aref = CR_AREF(insn->chanspec); - /* disable card's analog input interrupt sources and pacing */ - /* 4020 generates dac done interrupts even though they are disabled */ + /* disable card's analog input interrupt sources and pacing */ + /* 4020 generates dac done interrupts even though they are disabled */ disable_ai_pacing(dev); spin_lock_irqsave(&dev->spinlock, flags); @@ -1790,12 +1789,12 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, spin_unlock_irqrestore(&dev->spinlock, flags); if (board->layout != LAYOUT_4020) { - /* use internal queue */ + /* use internal queue */ devpriv->hw_config_bits &= ~EXT_QUEUE_BIT; writew(devpriv->hw_config_bits, devpriv->main_iobase + HW_CONFIG_REG); - /* ALT_SOURCE is internal calibration reference */ + /* ALT_SOURCE is internal calibration reference */ if (insn->chanspec & CR_ALT_SOURCE) { unsigned int cal_en_bit; @@ -1817,19 +1816,19 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, */ writew(0, devpriv->main_iobase + CALIBRATION_REG); } - /* load internal queue */ + /* load internal queue */ bits = 0; - /* set gain */ + /* set gain */ bits |= ai_range_bits_6xxx(dev, CR_RANGE(insn->chanspec)); - /* set single-ended / differential */ + /* set single-ended / differential */ bits |= se_diff_bit_6xxx(dev, aref == AREF_DIFF); if (aref == AREF_COMMON) bits |= ADC_COMMON_BIT; bits |= adc_chan_bits(channel); - /* set stop channel */ + /* set stop channel */ writew(adc_chan_bits(channel), devpriv->main_iobase + ADC_QUEUE_HIGH_REG); - /* set start channel, and rest of settings */ + /* set start channel, and rest of settings */ writew(bits, devpriv->main_iobase + ADC_QUEUE_LOAD_REG); } else { uint8_t old_cal_range_bits = devpriv->i2c_cal_range_bits; @@ -1841,7 +1840,7 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, } else { /* select BNC inputs */ devpriv->i2c_cal_range_bits |= adc_src_4020_bits(4); } - /* select range */ + /* select range */ if (range == 0) devpriv->i2c_cal_range_bits |= attenuate_bit(channel); else @@ -1868,14 +1867,14 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, } for (n = 0; n < insn->n; n++) { - /* clear adc buffer (inside loop for 4020 sake) */ + /* clear adc buffer (inside loop for 4020 sake) */ writew(0, devpriv->main_iobase + ADC_BUFFER_CLEAR_REG); /* trigger conversion, bits sent only matter for 4020 */ writew(adc_convert_chan_4020_bits(CR_CHAN(insn->chanspec)), devpriv->main_iobase + ADC_CONVERT_REG); - /* wait for data */ + /* wait for data */ ret = comedi_timeout(dev, s, insn, cb_pcidas64_ai_eoc, 0); if (ret) return ret; @@ -2255,7 +2254,7 @@ static void setup_sample_counters(struct comedi_device *dev, { struct pcidas64_private *devpriv = dev->private; - /* load hardware conversion counter */ + /* load hardware conversion counter */ if (use_hw_sample_counter(cmd)) { writew(cmd->stop_arg & 0xffff, devpriv->main_iobase + ADC_COUNT_LOWER_REG); @@ -2283,7 +2282,7 @@ static inline unsigned int dma_transfer_size(struct comedi_device *dev) static uint32_t ai_convert_counter_6xxx(const struct comedi_device *dev, const struct comedi_cmd *cmd) { - /* supposed to load counter with desired divisor minus 3 */ + /* supposed to load counter with desired divisor minus 3 */ return cmd->convert_arg / TIMER_BASE - 3; } @@ -2292,7 +2291,7 @@ static uint32_t ai_scan_counter_6xxx(struct comedi_device *dev, { uint32_t count; - /* figure out how long we need to delay at end of scan */ + /* figure out how long we need to delay at end of scan */ switch (cmd->scan_begin_src) { case TRIG_TIMER: count = (cmd->scan_begin_arg - @@ -2321,13 +2320,13 @@ static uint32_t ai_convert_counter_4020(struct comedi_device *dev, case TRIG_OTHER: divisor = devpriv->ext_clock.divisor; break; - default: /* should never happen */ + default: /* should never happen */ dev_err(dev->class_dev, "bug! failed to set ai pacing!\n"); divisor = 1000; break; } - /* supposed to load counter with desired divisor minus 2 for 4020 */ + /* supposed to load counter with desired divisor minus 2 for 4020 */ return divisor - 2; } @@ -2336,7 +2335,7 @@ static void select_master_clock_4020(struct comedi_device *dev, { struct pcidas64_private *devpriv = dev->private; - /* select internal/external master clock */ + /* select internal/external master clock */ devpriv->hw_config_bits &= ~MASTER_CLOCK_4020_MASK; if (cmd->scan_begin_src == TRIG_OTHER) { int chanspec = devpriv->ext_clock.chanspec; @@ -2372,7 +2371,7 @@ static inline void dma_start_sync(struct comedi_device *dev, struct pcidas64_private *devpriv = dev->private; unsigned long flags; - /* spinlock for plx dma control/status reg */ + /* spinlock for plx dma control/status reg */ spin_lock_irqsave(&dev->spinlock, flags); writeb(PLX_DMACSR_ENABLE | PLX_DMACSR_START | PLX_DMACSR_CLEARINTR, devpriv->plx9080_iobase + PLX_REG_DMACSR(channel)); @@ -2396,16 +2395,16 @@ static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd) scan_counter = ai_scan_counter_6xxx(dev, cmd); } - /* load lower 16 bits of convert interval */ + /* load lower 16 bits of convert interval */ writew(convert_counter & 0xffff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG); - /* load upper 8 bits of convert interval */ + /* load upper 8 bits of convert interval */ writew((convert_counter >> 16) & 0xff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); - /* load lower 16 bits of scan delay */ + /* load lower 16 bits of scan delay */ writew(scan_counter & 0xffff, devpriv->main_iobase + ADC_DELAY_INTERVAL_LOWER_REG); - /* load upper 8 bits of scan delay */ + /* load upper 8 bits of scan delay */ writew((scan_counter >> 16) & 0xff, devpriv->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG); } @@ -2441,26 +2440,26 @@ static int setup_channel_queue(struct comedi_device *dev, writew(devpriv->hw_config_bits, devpriv->main_iobase + HW_CONFIG_REG); bits = 0; - /* set channel */ + /* set channel */ bits |= adc_chan_bits(CR_CHAN(cmd->chanlist[0])); - /* set gain */ + /* set gain */ bits |= ai_range_bits_6xxx(dev, CR_RANGE(cmd->chanlist[0])); - /* set single-ended / differential */ + /* set single-ended / differential */ bits |= se_diff_bit_6xxx(dev, CR_AREF(cmd->chanlist[0]) == AREF_DIFF); if (CR_AREF(cmd->chanlist[0]) == AREF_COMMON) bits |= ADC_COMMON_BIT; - /* set stop channel */ + /* set stop channel */ writew(adc_chan_bits (CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1])), devpriv->main_iobase + ADC_QUEUE_HIGH_REG); - /* set start channel, and rest of settings */ + /* set start channel, and rest of settings */ writew(bits, devpriv->main_iobase + ADC_QUEUE_LOAD_REG); } else { - /* use external queue */ + /* use external queue */ if (dev->write_subdev && dev->write_subdev->busy) { warn_external_queue(dev); return -EBUSY; @@ -2468,30 +2467,30 @@ static int setup_channel_queue(struct comedi_device *dev, devpriv->hw_config_bits |= EXT_QUEUE_BIT; writew(devpriv->hw_config_bits, devpriv->main_iobase + HW_CONFIG_REG); - /* clear DAC buffer to prevent weird interactions */ + /* clear DAC buffer to prevent weird interactions */ writew(0, devpriv->main_iobase + DAC_BUFFER_CLEAR_REG); - /* clear queue pointer */ + /* clear queue pointer */ writew(0, devpriv->main_iobase + ADC_QUEUE_CLEAR_REG); - /* load external queue */ + /* load external queue */ for (i = 0; i < cmd->chanlist_len; i++) { bits = 0; - /* set channel */ + /* set channel */ bits |= adc_chan_bits(CR_CHAN(cmd-> chanlist[i])); - /* set gain */ + /* set gain */ bits |= ai_range_bits_6xxx(dev, CR_RANGE(cmd-> chanlist [i])); - /* set single-ended / differential */ + /* set single-ended / differential */ bits |= se_diff_bit_6xxx(dev, CR_AREF(cmd-> chanlist[i]) == AREF_DIFF); if (CR_AREF(cmd->chanlist[i]) == AREF_COMMON) bits |= ADC_COMMON_BIT; - /* mark end of queue */ + /* mark end of queue */ if (i == cmd->chanlist_len - 1) bits |= QUEUE_EOSCAN_BIT | QUEUE_EOSEQ_BIT; @@ -2504,7 +2503,7 @@ static int setup_channel_queue(struct comedi_device *dev, * but required for reliable operation */ writew(0, devpriv->main_iobase + ADC_QUEUE_CLEAR_REG); - /* prime queue holding register */ + /* prime queue holding register */ writew(0, devpriv->main_iobase + ADC_QUEUE_LOAD_REG); } } else { @@ -2513,7 +2512,7 @@ static int setup_channel_queue(struct comedi_device *dev, devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK; /* select BNC inputs */ devpriv->i2c_cal_range_bits |= adc_src_4020_bits(4); - /* select ranges */ + /* select ranges */ for (i = 0; i < cmd->chanlist_len; i++) { unsigned int channel = CR_CHAN(cmd->chanlist[i]); unsigned int range = CR_RANGE(cmd->chanlist[i]); @@ -2585,7 +2584,7 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (retval < 0) return retval; - /* make sure internal calibration source is turned off */ + /* make sure internal calibration source is turned off */ writew(0, devpriv->main_iobase + CALIBRATION_REG); set_ai_pacing(dev, cmd); @@ -2601,10 +2600,10 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (board->layout != LAYOUT_4020) { devpriv->adc_control1_bits &= ~ADC_MODE_MASK; if (cmd->convert_src == TRIG_EXT) - /* good old mode 13 */ + /* good old mode 13 */ devpriv->adc_control1_bits |= adc_mode_bits(13); else - /* mode 8. What else could you need? */ + /* mode 8. What else could you need? */ devpriv->adc_control1_bits |= adc_mode_bits(8); } else { devpriv->adc_control1_bits &= ~CHANNEL_MODE_4020_MASK; @@ -2624,20 +2623,20 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) devpriv->main_iobase + ADC_CONTROL1_REG); spin_unlock_irqrestore(&dev->spinlock, flags); - /* clear adc buffer */ + /* clear adc buffer */ writew(0, devpriv->main_iobase + ADC_BUFFER_CLEAR_REG); if ((cmd->flags & CMDF_WAKE_EOS) == 0 || board->layout == LAYOUT_4020) { devpriv->ai_dma_index = 0; - /* set dma transfer size */ + /* set dma transfer size */ for (i = 0; i < ai_dma_ring_count(board); i++) devpriv->ai_dma_desc[i].transfer_size = cpu_to_le32(dma_transfer_size(dev) * sizeof(uint16_t)); - /* give location of first dma descriptor */ + /* give location of first dma descriptor */ load_first_dma_descriptor(dev, 1, devpriv->ai_dma_desc_bus_addr | PLX_DMADPR_DESCPCI | @@ -2663,7 +2662,7 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) bits = ADC_ENABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT; if (cmd->flags & CMDF_WAKE_EOS) bits |= ADC_DMA_DISABLE_BIT; - /* set start trigger */ + /* set start trigger */ if (cmd->start_src == TRIG_EXT) { bits |= ADC_START_TRIG_EXT_BITS; if (cmd->start_arg & CR_INVERT) @@ -2679,7 +2678,7 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) spin_unlock_irqrestore(&dev->spinlock, flags); - /* start acquisition */ + /* start acquisition */ if (cmd->start_src == TRIG_NOW) writew(0, devpriv->main_iobase + ADC_START_REG); @@ -2697,7 +2696,7 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev) int num_samples; do { - /* get least significant 15 bits */ + /* get least significant 15 bits */ read_index = readw(devpriv->main_iobase + ADC_READ_PNTR_REG) & 0x7fff; write_index = readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG) & @@ -2802,14 +2801,14 @@ static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel) pci_addr_reg = devpriv->plx9080_iobase + PLX_REG_DMAPADR(channel); - /* loop until we have read all the full buffers */ + /* loop until we have read all the full buffers */ for (j = 0, next_transfer_addr = readl(pci_addr_reg); (next_transfer_addr < devpriv->ai_buffer_bus_addr[devpriv->ai_dma_index] || next_transfer_addr >= devpriv->ai_buffer_bus_addr[devpriv->ai_dma_index] + DMA_BUFFER_SIZE) && j < ai_dma_ring_count(board); j++) { - /* transfer data from dma buffer to comedi buffer */ + /* transfer data from dma buffer to comedi buffer */ num_samples = comedi_nsamples_left(s, dma_transfer_size(dev)); comedi_buf_write_samples(s, devpriv->ai_buffer[devpriv->ai_dma_index], @@ -2835,15 +2834,15 @@ static void handle_ai_interrupt(struct comedi_device *dev, uint8_t dma1_status; unsigned long flags; - /* check for fifo overrun */ + /* check for fifo overrun */ if (status & ADC_OVERRUN_BIT) { dev_err(dev->class_dev, "fifo overrun\n"); async->events |= COMEDI_CB_ERROR; } - /* spin lock makes sure no one else changes plx dma control reg */ + /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); dma1_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR1); - if (plx_status & PLX_INTCSR_DMA1IA) { /* dma chan 1 interrupt */ + if (plx_status & PLX_INTCSR_DMA1IA) { /* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMACSR_ENABLE) | PLX_DMACSR_CLEARINTR, devpriv->plx9080_iobase + PLX_REG_DMACSR1); @@ -2852,7 +2851,7 @@ static void handle_ai_interrupt(struct comedi_device *dev, } spin_unlock_irqrestore(&dev->spinlock, flags); - /* drain fifo with pio */ + /* drain fifo with pio */ if ((status & ADC_DONE_BIT) || ((cmd->flags & CMDF_WAKE_EOS) && (status & ADC_INTR_PENDING_BIT) && @@ -2865,7 +2864,7 @@ static void handle_ai_interrupt(struct comedi_device *dev, spin_unlock_irqrestore(&dev->spinlock, flags); } } - /* if we are have all the data, then quit */ + /* if we are have all the data, then quit */ if ((cmd->stop_src == TRIG_COUNT && async->scans_done >= cmd->stop_arg) || (cmd->stop_src == TRIG_EXT && (status & ADC_STOP_BIT))) @@ -3018,7 +3017,7 @@ static void handle_ao_interrupt(struct comedi_device *dev, async = s->async; cmd = &async->cmd; - /* spin lock makes sure no one else changes plx dma control reg */ + /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); dma0_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR0); if (plx_status & PLX_INTCSR_DMA0IA) { /* dma chan 0 interrupt */ @@ -3112,15 +3111,15 @@ static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, int chan = CR_CHAN(insn->chanspec); int range = CR_RANGE(insn->chanspec); - /* do some initializing */ + /* do some initializing */ writew(0, devpriv->main_iobase + DAC_CONTROL0_REG); - /* set range */ + /* set range */ set_dac_range_bits(dev, &devpriv->dac_control1_bits, chan, range); writew(devpriv->dac_control1_bits, devpriv->main_iobase + DAC_CONTROL1_REG); - /* write to channel */ + /* write to channel */ if (board->layout == LAYOUT_4020) { writew(data[0] & 0xff, devpriv->main_iobase + dac_lsb_4020_reg(chan)); @@ -3130,7 +3129,7 @@ static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, writew(data[0], devpriv->main_iobase + dac_convert_reg(chan)); } - /* remember output value */ + /* remember output value */ s->readback[chan] = data[0]; return 1; @@ -3562,7 +3561,7 @@ static int caldac_i2c_write(struct comedi_device *dev, uint8_t serial_bytes[3]; uint8_t i2c_addr; enum pointer_bits { - /* manual has gain and offset bits switched */ + /* manual has gain and offset bits switched */ OFFSET_0_2 = 0x1, GAIN_0_2 = 0x2, OFFSET_1_3 = 0x4, @@ -3573,35 +3572,35 @@ static int caldac_i2c_write(struct comedi_device *dev, }; switch (caldac_channel) { - case 0: /* chan 0 offset */ + case 0: /* chan 0 offset */ i2c_addr = CALDAC0_I2C_ADDR; serial_bytes[0] = OFFSET_0_2; break; - case 1: /* chan 1 offset */ + case 1: /* chan 1 offset */ i2c_addr = CALDAC0_I2C_ADDR; serial_bytes[0] = OFFSET_1_3; break; - case 2: /* chan 2 offset */ + case 2: /* chan 2 offset */ i2c_addr = CALDAC1_I2C_ADDR; serial_bytes[0] = OFFSET_0_2; break; - case 3: /* chan 3 offset */ + case 3: /* chan 3 offset */ i2c_addr = CALDAC1_I2C_ADDR; serial_bytes[0] = OFFSET_1_3; break; - case 4: /* chan 0 gain */ + case 4: /* chan 0 gain */ i2c_addr = CALDAC0_I2C_ADDR; serial_bytes[0] = GAIN_0_2; break; - case 5: /* chan 1 gain */ + case 5: /* chan 1 gain */ i2c_addr = CALDAC0_I2C_ADDR; serial_bytes[0] = GAIN_1_3; break; - case 6: /* chan 2 gain */ + case 6: /* chan 2 gain */ i2c_addr = CALDAC1_I2C_ADDR; serial_bytes[0] = GAIN_0_2; break; - case 7: /* chan 3 gain */ + case 7: /* chan 3 gain */ i2c_addr = CALDAC1_I2C_ADDR; serial_bytes[0] = GAIN_1_3; break; @@ -3724,24 +3723,24 @@ static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address) udelay(eeprom_udelay); devpriv->plx_control_bits &= ~PLX_CNTRL_EESK & ~PLX_CNTRL_EECS; - /* make sure we don't send anything to the i2c bus on 4020 */ + /* make sure we don't send anything to the i2c bus on 4020 */ devpriv->plx_control_bits |= PLX_CNTRL_USERO; writel(devpriv->plx_control_bits, plx_control_addr); - /* activate serial eeprom */ + /* activate serial eeprom */ udelay(eeprom_udelay); devpriv->plx_control_bits |= PLX_CNTRL_EECS; writel(devpriv->plx_control_bits, plx_control_addr); - /* write read command and desired memory address */ + /* write read command and desired memory address */ for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) { - /* set bit to be written */ + /* set bit to be written */ udelay(eeprom_udelay); if (bitstream & bit) devpriv->plx_control_bits |= PLX_CNTRL_EEWB; else devpriv->plx_control_bits &= ~PLX_CNTRL_EEWB; writel(devpriv->plx_control_bits, plx_control_addr); - /* clock in bit */ + /* clock in bit */ udelay(eeprom_udelay); devpriv->plx_control_bits |= PLX_CNTRL_EESK; writel(devpriv->plx_control_bits, plx_control_addr); @@ -3749,10 +3748,10 @@ static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address) devpriv->plx_control_bits &= ~PLX_CNTRL_EESK; writel(devpriv->plx_control_bits, plx_control_addr); } - /* read back value from eeprom memory location */ + /* read back value from eeprom memory location */ value = 0; for (bit = 1 << (value_length - 1); bit; bit >>= 1) { - /* clock out bit */ + /* clock out bit */ udelay(eeprom_udelay); devpriv->plx_control_bits |= PLX_CNTRL_EESK; writel(devpriv->plx_control_bits, plx_control_addr); @@ -3764,7 +3763,7 @@ static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address) value |= bit; } - /* deactivate eeprom serial input */ + /* deactivate eeprom serial input */ udelay(eeprom_udelay); devpriv->plx_control_bits &= ~PLX_CNTRL_EECS; writel(devpriv->plx_control_bits, plx_control_addr); @@ -3781,9 +3780,7 @@ static int eeprom_read_insn(struct comedi_device *dev, return 1; } -/* - * Allocate and initialize the subdevice structures. - */ +/* Allocate and initialize the subdevice structures. */ static int setup_subdevices(struct comedi_device *dev) { const struct pcidas64_board *board = dev->board_ptr; @@ -3822,7 +3819,7 @@ static int setup_subdevices(struct comedi_device *dev) * (not internal calibration sources) */ devpriv->i2c_cal_range_bits = adc_src_4020_bits(4); - /* set channels to +-5 volt input ranges */ + /* set channels to +-5 volt input ranges */ for (i = 0; i < s->n_chan; i++) devpriv->i2c_cal_range_bits |= attenuate_bit(i); data = devpriv->i2c_cal_range_bits; @@ -3855,7 +3852,7 @@ static int setup_subdevices(struct comedi_device *dev) s->type = COMEDI_SUBD_UNUSED; } - /* digital input */ + /* digital input */ s = &dev->subdevices[2]; if (board->layout == LAYOUT_64XX) { s->type = COMEDI_SUBD_DI; @@ -3868,7 +3865,7 @@ static int setup_subdevices(struct comedi_device *dev) s->type = COMEDI_SUBD_UNUSED; } - /* digital output */ + /* digital output */ if (board->layout == LAYOUT_64XX) { s = &dev->subdevices[3]; s->type = COMEDI_SUBD_DO; @@ -3897,7 +3894,7 @@ static int setup_subdevices(struct comedi_device *dev) s->type = COMEDI_SUBD_UNUSED; } - /* 8 channel dio for 60xx */ + /* 8 channel dio for 60xx */ s = &dev->subdevices[5]; if (board->layout == LAYOUT_60XX) { s->type = COMEDI_SUBD_DIO; @@ -3911,7 +3908,7 @@ static int setup_subdevices(struct comedi_device *dev) s->type = COMEDI_SUBD_UNUSED; } - /* caldac */ + /* caldac */ s = &dev->subdevices[6]; s->type = COMEDI_SUBD_CALIB; s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; @@ -3931,7 +3928,7 @@ static int setup_subdevices(struct comedi_device *dev) s->readback[i] = s->maxdata / 2; } - /* 2 channel ad8402 potentiometer */ + /* 2 channel ad8402 potentiometer */ s = &dev->subdevices[7]; if (board->layout == LAYOUT_64XX) { s->type = COMEDI_SUBD_CALIB; @@ -3965,7 +3962,7 @@ static int setup_subdevices(struct comedi_device *dev) s->type = COMEDI_SUBD_UNUSED; } - /* user counter subd XXX */ + /* user counter subd XXX */ s = &dev->subdevices[9]; s->type = COMEDI_SUBD_UNUSED; @@ -4011,7 +4008,7 @@ static int auto_attach(struct comedi_device *dev, return -ENOMEM; } - /* figure out what local addresses are */ + /* figure out what local addresses are */ local_range = readl(devpriv->plx9080_iobase + PLX_REG_LAS0RR) & PLX_LASRR_MEM_MASK; local_decode = readl(devpriv->plx9080_iobase + PLX_REG_LAS0BA) & -- cgit v1.2.3-55-g7522