From 9821786d7c90eee2f6852261893d9703801aae47 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Mon, 18 Sep 2017 17:39:12 +0300 Subject: usb: xhci: Free the right ring in xhci_add_endpoint() In the xhci_add_endpoint(), a new ring was allocated and saved at xhci_virt_ep->new_ring. Hence, when error happens, we need to free the allocated ring before returning error. Current code frees xhci_virt_ep->ring instead of the new_ring. This patch fixes this. Cc: Signed-off-by: Lu Baolu Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b2ff1ff1a02f..ee198ea47f49 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1703,7 +1703,8 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, if (xhci->quirks & XHCI_MTK_HOST) { ret = xhci_mtk_add_ep_quirk(hcd, udev, ep); if (ret < 0) { - xhci_free_endpoint_ring(xhci, virt_dev, ep_index); + xhci_ring_free(xhci, virt_dev->eps[ep_index].new_ring); + virt_dev->eps[ep_index].new_ring = NULL; return ret; } } -- cgit v1.2.3-55-g7522 From 5a838a13c9b4e5dd188b7a6eaeb894e9358ead0c Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 18 Sep 2017 17:39:13 +0300 Subject: xhci: fix finding correct bus_state structure for USB 3.1 hosts xhci driver keeps a bus_state structure for each hcd (usb2 and usb3) The structure is picked based on hcd speed, but driver only compared for HCD_USB3 speed, returning the wrong bus_state for HCD_USB31 hosts. This caused null pointer dereference errors in bus_resume function. Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 2abaa4d6d39d..e96e90d0fe9f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1681,7 +1681,7 @@ struct xhci_bus_state { static inline unsigned int hcd_index(struct usb_hcd *hcd) { - if (hcd->speed == HCD_USB3) + if (hcd->speed >= HCD_USB3) return 0; else return 1; -- cgit v1.2.3-55-g7522 From 114ec3a6f9096d211a4aff4277793ba969a62c73 Mon Sep 17 00:00:00 2001 From: Jim Dickerson Date: Mon, 18 Sep 2017 17:39:14 +0300 Subject: usb: pci-quirks.c: Corrected timeout values used in handshake Servers were emitting failed handoff messages but were not waiting the full 1 second as designated in section 4.22.1 of the eXtensible Host Controller Interface specifications. The handshake was using wrong units so calls were made with milliseconds not microseconds. Comments referenced 5 seconds not 1 second as in specs. The wrong units were also corrected in a second handshake call. Cc: Signed-off-by: Jim Dickerson Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 658d9d1f9ea3..e02dbb1e1cdd 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -1022,7 +1022,7 @@ EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); * * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS. * It signals to the BIOS that the OS wants control of the host controller, - * and then waits 5 seconds for the BIOS to hand over control. + * and then waits 1 second for the BIOS to hand over control. * If we timeout, assume the BIOS is broken and take control anyway. */ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) @@ -1069,9 +1069,9 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) if (val & XHCI_HC_BIOS_OWNED) { writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset); - /* Wait for 5 seconds with 10 microsecond polling interval */ + /* Wait for 1 second with 10 microsecond polling interval */ timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED, - 0, 5000, 10); + 0, 1000000, 10); /* Assume a buggy BIOS and take HC ownership anyway */ if (timeout) { @@ -1100,7 +1100,7 @@ hc_init: * operational or runtime registers. Wait 5 seconds and no more. */ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0, - 5000, 10); + 5000000, 10); /* Assume a buggy HC and start HC initialization anyway */ if (timeout) { val = readl(op_reg_base + XHCI_STS_OFFSET); -- cgit v1.2.3-55-g7522 From 76a14d7bf92960aac2f5450bfd23783bfa618be9 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 18 Sep 2017 17:39:15 +0300 Subject: xhci: fix wrong endpoint ESIT value shown in tracing Read the endpiont ESIT from endpiont context using correct macro. Add a macro for reading the high bits of ESIT for Large ESIT Payload Capable hosts (LEC=1) Cc: # 4.12 Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index e96e90d0fe9f..7c87189e8110 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -735,6 +735,8 @@ struct xhci_ep_ctx { #define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK) /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */ #define EP_HAS_LSA (1 << 15) +/* hosts with LEC=1 use bits 31:24 as ESIT high bits. */ +#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) >> 24) & 0xff) /* ep_info2 bitmasks */ /* @@ -2540,8 +2542,8 @@ static inline const char *xhci_decode_ep_context(u32 info, u32 info2, u64 deq, u8 lsa; u8 hid; - esit = EP_MAX_ESIT_PAYLOAD_HI(info) << 16 | - EP_MAX_ESIT_PAYLOAD_LO(tx_info); + esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 | + CTX_TO_MAX_ESIT_PAYLOAD(tx_info); ep_state = info & EP_STATE_MASK; max_pstr = info & EP_MAXPSTREAMS_MASK; -- cgit v1.2.3-55-g7522 From c6b8e79306f515b5483eb11076e0fbfc140434a8 Mon Sep 17 00:00:00 2001 From: Adam Wallis Date: Mon, 18 Sep 2017 17:39:16 +0300 Subject: usb: host: xhci-plat: allow sysdev to inherit from ACPI Commit 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") updated the method determining DMA for XHCI from sysdev. However, this patch broke the ability to enumerate the FWNODE from parent ACPI devices from the child plat XHCI device. Currently, xhci_plat is not set up properly when the parent device is an ACPI node. The conditions that xhci_plat_probe should satisfy are 1. xhci_plat comes from firmware 2. xhci_plat is child of a device from firmware (dwc3-plat) 3. xhci_plat is grandchild of a pci device (dwc3-pci) Case 2 is covered when the child is an OF node (by checking sysdev->parent->of_node), however, an ACPI parent will return NULL in the of_node check and will thus not result in sysdev being set to sysdev->parent [ 17.591549] xhci-hcd: probe of xhci-hcd.6.auto failed with error -5 This change adds a check for ACPI to completely allow for condition 2. This is done by first checking if the parent node is of type ACPI (e.g., dwc3-plat) and set sysdev to sysdev->parent if either of the two following conditions are met: 1: If fwnode is empty (in the case that platform_device_add_properties was not called on the allocated platform device) 2: fwnode exists but is not of type ACPI (this would happen if platform_device_add_properties was called on the allocated device. Instead of type FWNODE_ACPI, you would end up with FWNODE_PDATA) Cc: stable@vger.kernel.org #4.12.x Cc: stable@vger.kernel.org #4.13.x Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Tested-by: Thang Q. Nguyen Signed-off-by: Adam Wallis Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 163bafde709f..1cb6eaef4ae1 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -178,14 +178,18 @@ static int xhci_plat_probe(struct platform_device *pdev) * 2. xhci_plat is child of a device from firmware (dwc3-plat) * 3. xhci_plat is grandchild of a pci device (dwc3-pci) */ - sysdev = &pdev->dev; - if (sysdev->parent && !sysdev->of_node && sysdev->parent->of_node) - sysdev = sysdev->parent; + for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) { + if (is_of_node(sysdev->fwnode) || + is_acpi_device_node(sysdev->fwnode)) + break; #ifdef CONFIG_PCI - else if (sysdev->parent && sysdev->parent->parent && - sysdev->parent->parent->bus == &pci_bus_type) - sysdev = sysdev->parent->parent; + else if (sysdev->bus == &pci_bus_type) + break; #endif + } + + if (!sysdev) + sysdev = &pdev->dev; /* Try to set 64-bit DMA first */ if (WARN_ON(!sysdev->dma_mask)) -- cgit v1.2.3-55-g7522 From 4ec1cd3eeeee7ccc35681270da028dbc29ca7bbd Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 18 Sep 2017 17:39:17 +0300 Subject: xhci: Fix sleeping with spin_lock_irq() held in ASmedia 1042A workaround The flow control workaround for ASM1042A xHC hosts sleeps between register polling. The workaround gets called in several places, among them with spin_lock_irq() held when xHC host is resumed or hoplug removed. This was noticed as kernel panics at resume on a Dell XPS15 9550 with TB16 thunderbolt dock. Avoid sleeping with spin_lock_irq() held, use udelay() instead The original workaround was added to 4.9 and 4.12 stable releases, this patch needs to be applied to those as well. Fixes: 9da5a1092b13 ("xhci: Bad Ethernet performance plugged in ASM1042A host") Cc: #4.9+ Reported-by: Jose Marino Tested-by: Jose Marino Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index e02dbb1e1cdd..6dda3623a276 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -447,7 +447,7 @@ static int usb_asmedia_wait_write(struct pci_dev *pdev) if ((value & ASMT_CONTROL_WRITE_BIT) == 0) return 0; - usleep_range(40, 60); + udelay(50); } dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__); -- cgit v1.2.3-55-g7522 From 7bea22b124d77845c85a62eaa29a85ba6cc2f899 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 18 Sep 2017 17:39:18 +0300 Subject: xhci: set missing SuperSpeedPlus Link Protocol bit in roothub descriptor A SuperSpeedPlus roothub needs to have the Link Protocol (LP) bit set in the bmSublinkSpeedAttr[] entry of a SuperSpeedPlus descriptor. If the xhci controller has an optional Protocol Speed ID (PSI) table then that will be used as a base to create the roothub SuperSpeedPlus descriptor. The PSI table does not however necessary contain the LP bit so we need to set it manually. Check the psi speed and set LP bit if speed is 10Gbps or higher. We're not setting it for 5 to 10Gbps as USB 3.1 specification always mention SuperSpeedPlus for 10Gbps or higher, and some SSIC USB 3.0 speeds can be over 5Gbps, such as SSIC-G3B-L1 at 5830 Mbps Cc: # 4.6+ Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index ad89a6d4111b..4dba2cf73cbe 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -112,7 +112,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, /* If PSI table exists, add the custom speed attributes from it */ if (usb3_1 && xhci->usb3_rhub.psi_count) { - u32 ssp_cap_base, bm_attrib, psi; + u32 ssp_cap_base, bm_attrib, psi, psi_mant, psi_exp; int offset; ssp_cap_base = USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE; @@ -139,6 +139,15 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, for (i = 0; i < xhci->usb3_rhub.psi_count; i++) { psi = xhci->usb3_rhub.psi[i]; psi &= ~USB_SSP_SUBLINK_SPEED_RSVD; + psi_exp = XHCI_EXT_PORT_PSIE(psi); + psi_mant = XHCI_EXT_PORT_PSIM(psi); + + /* Shift to Gbps and set SSP Link BIT(14) if 10Gpbs */ + for (; psi_exp < 3; psi_exp++) + psi_mant /= 1000; + if (psi_mant >= 10) + psi |= BIT(14); + if ((psi & PLT_MASK) == PLT_SYM) { /* Symmetric, create SSA RX and TX from one PSI entry */ put_unaligned_le32(psi, &buf[offset]); -- cgit v1.2.3-55-g7522 From bcd6a7aa13800afc1418e6b29d944d882214939a Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Mon, 18 Sep 2017 17:39:19 +0300 Subject: Revert "xhci: Limit USB2 port wake support for AMD Promontory hosts" This reverts commit dec08194ffeccfa1cf085906b53d301930eae18f. Commit dec08194ffec ("xhci: Limit USB2 port wake support for AMD Promontory hosts") makes all high speed USB ports on ASUS PRIME B350M-A cease to function after enabling runtime PM. All boards with this chipsets will be affected, so revert the commit. The original patch was added to stable 4.9, 4.11 and 4.12 and needs to reverted from there as well Cc: # 4.9+ Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 3 --- drivers/usb/host/xhci-pci.c | 12 ------------ drivers/usb/host/xhci.h | 2 +- 3 files changed, 1 insertion(+), 16 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 4dba2cf73cbe..da9158f171cb 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1515,9 +1515,6 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t2 |= PORT_WKOC_E | PORT_WKCONN_E; t2 &= ~PORT_WKDISC_E; } - if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) && - (hcd->speed < HCD_USB3)) - t2 &= ~PORT_WAKE_BITS; } else t2 &= ~PORT_WAKE_BITS; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 8071c8fdd15e..76f392954733 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -54,11 +54,6 @@ #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 -#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 -#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba -#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb -#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc - #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 static const char hcd_name[] = "xhci_hcd"; @@ -142,13 +137,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_AMD) xhci->quirks |= XHCI_TRUST_TX_LENGTH; - if ((pdev->vendor == PCI_VENDOR_ID_AMD) && - ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) || - (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) || - (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) || - (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1))) - xhci->quirks |= XHCI_U2_DISABLE_WAKE; - if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; xhci->quirks |= XHCI_INTEL_HOST; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7c87189e8110..2b48aa4f6b76 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1828,7 +1828,7 @@ struct xhci_hcd { /* For controller with a broken Port Disable implementation */ #define XHCI_BROKEN_PORT_PED (1 << 25) #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26) -#define XHCI_U2_DISABLE_WAKE (1 << 27) +/* Reserved. It was XHCI_U2_DISABLE_WAKE */ #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28) unsigned int num_active_eps; -- cgit v1.2.3-55-g7522