From 2bf69b5fe90b3246ab50064c5a690a363e8c53e2 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 11 Aug 2005 02:47:54 -0400 Subject: phy subsystem: more cleanups - unexport symbols never used outside of home module - remove dead code - remove CONFIG_PHYCONTROL, make it unconditionally enabled --- drivers/net/phy/Kconfig | 8 -- drivers/net/phy/mdio_bus.c | 74 ---------------- drivers/net/phy/phy.c | 197 +++---------------------------------------- drivers/net/phy/phy_device.c | 130 +--------------------------- 4 files changed, 12 insertions(+), 397 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index c2f1bf1d02d2..6450bd71deb4 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -12,14 +12,6 @@ config PHYLIB devices. This option provides infrastructure for managing PHY devices. -config PHYCONTROL - bool "Support for automatically handling PHY state changes" - depends on PHYLIB - help - Adds code to perform all the work for keeping PHY link - state (speed/duplex/etc) up-to-date. Also handles - interrupts. - comment "MII PHY device drivers" depends on PHYLIB diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 5fbea6acfe80..d5a05be28818 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -38,80 +38,6 @@ #include #include -/* mdiobus_register - * - * description: Called by a bus driver to bring up all the PHYs - * on a given bus, and attach them to the bus - */ -int mdiobus_register(struct mii_bus *bus) -{ - int i; - int err = 0; - - spin_lock_init(&bus->mdio_lock); - - if (NULL == bus || NULL == bus->name || - NULL == bus->read || - NULL == bus->write) - return -EINVAL; - - if (bus->reset) - bus->reset(bus); - - for (i = 0; i < PHY_MAX_ADDR; i++) { - struct phy_device *phydev; - - phydev = get_phy_device(bus, i); - - if (IS_ERR(phydev)) - return PTR_ERR(phydev); - - /* There's a PHY at this address - * We need to set: - * 1) IRQ - * 2) bus_id - * 3) parent - * 4) bus - * 5) mii_bus - * And, we need to register it */ - if (phydev) { - phydev->irq = bus->irq[i]; - - phydev->dev.parent = bus->dev; - phydev->dev.bus = &mdio_bus_type; - sprintf(phydev->dev.bus_id, "phy%d:%d", bus->id, i); - - phydev->bus = bus; - - err = device_register(&phydev->dev); - - if (err) - printk(KERN_ERR "phy %d failed to register\n", - i); - } - - bus->phy_map[i] = phydev; - } - - pr_info("%s: probed\n", bus->name); - - return err; -} -EXPORT_SYMBOL(mdiobus_register); - -void mdiobus_unregister(struct mii_bus *bus) -{ - int i; - - for (i = 0; i < PHY_MAX_ADDR; i++) { - if (bus->phy_map[i]) { - device_unregister(&bus->phy_map[i]->dev); - kfree(bus->phy_map[i]); - } - } -} -EXPORT_SYMBOL(mdiobus_unregister); - /* mdio_bus_match * * description: Given a PHY device, and a PHY driver, return 1 if diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 934065dd6371..d3e43631b89b 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -40,21 +40,9 @@ #include static void phy_timer(unsigned long data); - -/* Convenience function to print out the current phy status - */ -void phy_print_status(struct phy_device *phydev) -{ - pr_info("%s: Link is %s", phydev->dev.bus_id, - phydev->link ? "Up" : "Down"); - if (phydev->link) - printk(" - %d/%s", phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "Full" : "Half"); - - printk("\n"); -} -EXPORT_SYMBOL(phy_print_status); +static int phy_disable_interrupts(struct phy_device *phydev); +static void phy_sanitize_settings(struct phy_device *phydev); +static int phy_stop_interrupts(struct phy_device *phydev); /* Convenience functions for reading/writing a given PHY @@ -133,7 +121,7 @@ static inline int phy_aneg_done(struct phy_device *phydev) * and to PHY_FORCING if auto-negotiation is disabled. Unless * the PHY is currently HALTED. */ -int phy_start_aneg(struct phy_device *phydev) +static int phy_start_aneg(struct phy_device *phydev) { int err; @@ -161,8 +149,6 @@ out_unlock: spin_unlock(&phydev->lock); return err; } -EXPORT_SYMBOL(phy_start_aneg); - /* A structure for mapping a particular speed and duplex * combination to a particular SUPPORTED and ADVERTISED value */ @@ -255,7 +241,7 @@ static inline int phy_find_valid(int idx, u32 features) * duplexes. Drop down by one in this order: 1000/FULL, * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF */ -void phy_sanitize_settings(struct phy_device *phydev) +static void phy_sanitize_settings(struct phy_device *phydev) { u32 features = phydev->supported; int idx; @@ -270,7 +256,6 @@ void phy_sanitize_settings(struct phy_device *phydev) phydev->speed = settings[idx].speed; phydev->duplex = settings[idx].duplex; } -EXPORT_SYMBOL(phy_sanitize_settings); /* phy_force_reduction * @@ -477,48 +462,22 @@ void phy_error(struct phy_device *phydev) spin_unlock(&phydev->lock); } -#ifdef CONFIG_PHYCONTROL - -static void phy_change(void *data); - -/* phy_interrupt - * - * description: When a PHY interrupt occurs, the handler disables - * interrupts, and schedules a work task to clear the interrupt. - */ -static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs) -{ - struct phy_device *phydev = phy_dat; - - /* The MDIO bus is not allowed to be written in interrupt - * context, so we need to disable the irq here. A work - * queue will write the PHY to disable and clear the - * interrupt, and then reenable the irq line. */ - disable_irq_nosync(irq); - - schedule_work(&phydev->phy_queue); - - return IRQ_HANDLED; -} - -/* Enable the interrupts from the PHY side */ -int phy_enable_interrupts(struct phy_device *phydev) +static int phy_stop_interrupts(struct phy_device *phydev) { int err; - err = phy_clear_interrupt(phydev); + err = phy_disable_interrupts(phydev); - if (err < 0) - return err; + if (err) + phy_error(phydev); - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + free_irq(phydev->irq, phydev); return err; } -EXPORT_SYMBOL(phy_enable_interrupts); /* Disable the PHY interrupts from the PHY side */ -int phy_disable_interrupts(struct phy_device *phydev) +static int phy_disable_interrupts(struct phy_device *phydev) { int err; @@ -541,140 +500,6 @@ phy_err: return err; } -EXPORT_SYMBOL(phy_disable_interrupts); - -/* phy_start_interrupts - * - * description: Request the interrupt for the given PHY. If - * this fails, then we set irq to PHY_POLL. - * Otherwise, we enable the interrupts in the PHY. - * Returns 0 on success. - * This should only be called with a valid IRQ number. - */ -int phy_start_interrupts(struct phy_device *phydev) -{ - int err = 0; - - INIT_WORK(&phydev->phy_queue, phy_change, phydev); - - if (request_irq(phydev->irq, phy_interrupt, - SA_SHIRQ, - "phy_interrupt", - phydev) < 0) { - printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", - phydev->bus->name, - phydev->irq); - phydev->irq = PHY_POLL; - return 0; - } - - err = phy_enable_interrupts(phydev); - - return err; -} -EXPORT_SYMBOL(phy_start_interrupts); - -int phy_stop_interrupts(struct phy_device *phydev) -{ - int err; - - err = phy_disable_interrupts(phydev); - - if (err) - phy_error(phydev); - - free_irq(phydev->irq, phydev); - - return err; -} -EXPORT_SYMBOL(phy_stop_interrupts); - - -/* Scheduled by the phy_interrupt/timer to handle PHY changes */ -static void phy_change(void *data) -{ - int err; - struct phy_device *phydev = data; - - err = phy_disable_interrupts(phydev); - - if (err) - goto phy_err; - - spin_lock(&phydev->lock); - if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) - phydev->state = PHY_CHANGELINK; - spin_unlock(&phydev->lock); - - enable_irq(phydev->irq); - - /* Reenable interrupts */ - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); - - if (err) - goto irq_enable_err; - - return; - -irq_enable_err: - disable_irq(phydev->irq); -phy_err: - phy_error(phydev); -} - -/* Bring down the PHY link, and stop checking the status. */ -void phy_stop(struct phy_device *phydev) -{ - spin_lock(&phydev->lock); - - if (PHY_HALTED == phydev->state) - goto out_unlock; - - if (phydev->irq != PHY_POLL) { - /* Clear any pending interrupts */ - phy_clear_interrupt(phydev); - - /* Disable PHY Interrupts */ - phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); - } - - phydev->state = PHY_HALTED; - -out_unlock: - spin_unlock(&phydev->lock); -} - - -/* phy_start - * - * description: Indicates the attached device's readiness to - * handle PHY-related work. Used during startup to start the - * PHY, and after a call to phy_stop() to resume operation. - * Also used to indicate the MDIO bus has cleared an error - * condition. - */ -void phy_start(struct phy_device *phydev) -{ - spin_lock(&phydev->lock); - - switch (phydev->state) { - case PHY_STARTING: - phydev->state = PHY_PENDING; - break; - case PHY_READY: - phydev->state = PHY_UP; - break; - case PHY_HALTED: - phydev->state = PHY_RESUMING; - default: - break; - } - spin_unlock(&phydev->lock); -} -EXPORT_SYMBOL(phy_stop); -EXPORT_SYMBOL(phy_start); - -#endif /* CONFIG_PHYCONTROL */ /* PHY timer which handles the state machine */ static void phy_timer(unsigned long data) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c11138330fed..c44d54f6310a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -124,133 +124,6 @@ void phy_prepare_link(struct phy_device *phydev, phydev->adjust_link = handler; } -#ifdef CONFIG_PHYCONTROL -/* phy_connect: - * - * description: Convenience function for connecting ethernet - * devices to PHY devices. The default behavior is for - * the PHY infrastructure to handle everything, and only notify - * the connected driver when the link status changes. If you - * don't want, or can't use the provided functionality, you may - * choose to call only the subset of functions which provide - * the desired functionality. - */ -struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, - void (*handler)(struct net_device *), u32 flags) -{ - struct phy_device *phydev; - - phydev = phy_attach(dev, phy_id, flags); - - if (IS_ERR(phydev)) - return phydev; - - phy_prepare_link(phydev, handler); - - phy_start_machine(phydev, NULL); - - if (phydev->irq > 0) - phy_start_interrupts(phydev); - - return phydev; -} -EXPORT_SYMBOL(phy_connect); - -void phy_disconnect(struct phy_device *phydev) -{ - if (phydev->irq > 0) - phy_stop_interrupts(phydev); - - phy_stop_machine(phydev); - - phydev->adjust_link = NULL; - - phy_detach(phydev); -} -EXPORT_SYMBOL(phy_disconnect); - -#endif /* CONFIG_PHYCONTROL */ - -/* phy_attach: - * - * description: Called by drivers to attach to a particular PHY - * device. The phy_device is found, and properly hooked up - * to the phy_driver. If no driver is attached, then the - * genphy_driver is used. The phy_device is given a ptr to - * the attaching device, and given a callback for link status - * change. The phy_device is returned to the attaching - * driver. - */ -static int phy_compare_id(struct device *dev, void *data) -{ - return strcmp((char *)data, dev->bus_id) ? 0 : 1; -} - -struct phy_device *phy_attach(struct net_device *dev, - const char *phy_id, u32 flags) -{ - struct bus_type *bus = &mdio_bus_type; - struct phy_device *phydev; - struct device *d; - - /* Search the list of PHY devices on the mdio bus for the - * PHY with the requested name */ - d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id); - - if (d) { - phydev = to_phy_device(d); - } else { - printk(KERN_ERR "%s not found\n", phy_id); - return ERR_PTR(-ENODEV); - } - - /* Assume that if there is no driver, that it doesn't - * exist, and we should use the genphy driver. */ - if (NULL == d->driver) { - int err; - down_write(&d->bus->subsys.rwsem); - d->driver = &genphy_driver.driver; - - err = d->driver->probe(d); - - if (err < 0) - return ERR_PTR(err); - - device_bind_driver(d); - up_write(&d->bus->subsys.rwsem); - } - - if (phydev->attached_dev) { - printk(KERN_ERR "%s: %s already attached\n", - dev->name, phy_id); - return ERR_PTR(-EBUSY); - } - - phydev->attached_dev = dev; - - phydev->dev_flags = flags; - - return phydev; -} -EXPORT_SYMBOL(phy_attach); - -void phy_detach(struct phy_device *phydev) -{ - phydev->attached_dev = NULL; - - /* If the device had no specific driver before (i.e. - it - * was using the generic driver), we unbind the device - * from the generic driver so that there's a chance a - * real driver could be loaded */ - if (phydev->dev.driver == &genphy_driver.driver) { - down_write(&phydev->dev.bus->subsys.rwsem); - device_release_driver(&phydev->dev); - up_write(&phydev->dev.bus->subsys.rwsem); - } -} -EXPORT_SYMBOL(phy_detach); - - /* Generic PHY support and helper functions */ /* genphy_config_advert @@ -259,7 +132,7 @@ EXPORT_SYMBOL(phy_detach); * after sanitizing the values to make sure we only advertise * what is supported */ -int genphy_config_advert(struct phy_device *phydev) +static int genphy_config_advert(struct phy_device *phydev) { u32 advertise; int adv; @@ -317,7 +190,6 @@ int genphy_config_advert(struct phy_device *phydev) return adv; } -EXPORT_SYMBOL(genphy_config_advert); /* genphy_setup_forced * -- cgit v1.2.3-55-g7522