From 57c1a24ee276a33190008243f986419e122c0dea Mon Sep 17 00:00:00 2001 From: Alexey Korolev Date: Tue, 6 Jan 2009 17:36:09 +0000 Subject: [MTD] [LPDDR] qinfo_probe depends on lpddr Signed-off-by: Alexey Korolev Signed-off-by: David Woodhouse --- drivers/mtd/lpddr/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index acd4ea9b2278..5a401d8047ab 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -12,6 +12,7 @@ config MTD_LPDDR DDR memories, intended for battery-operated systems. config MTD_QINFO_PROBE + depends on MTD_LPDDR tristate "Detect flash chips by QINFO probe" help Device Information for LPDDR chips is offered through the Overlay -- cgit v1.2.3-55-g7522 From 5f877607cdfe8b60bf96fb96e527e0ce2a21e68b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 11 Jan 2009 19:52:19 +0000 Subject: [MTD] map_rom has NULL erase pointer Which means if inftl or similar are loaded with it (which is a dumb thing to do admittedly) it may oops. Closes #8108 [dwmw2: change error to -EROFS to match write-protected flash] Signed-off-by: Alan Cox Signed-off-by: David Woodhouse --- drivers/mtd/chips/map_rom.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index 821d0ed6bae3..c76d6e5f47ee 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -19,6 +19,7 @@ static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static void maprom_nop (struct mtd_info *); static struct mtd_info *map_rom_probe(struct map_info *map); +static int maprom_erase (struct mtd_info *mtd, struct erase_info *info); static struct mtd_chip_driver maprom_chipdrv = { .probe = map_rom_probe, @@ -42,6 +43,7 @@ static struct mtd_info *map_rom_probe(struct map_info *map) mtd->read = maprom_read; mtd->write = maprom_write; mtd->sync = maprom_nop; + mtd->erase = maprom_erase; mtd->flags = MTD_CAP_ROM; mtd->erasesize = map->size; mtd->writesize = 1; @@ -71,6 +73,12 @@ static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *re return -EIO; } +static int maprom_erase (struct mtd_info *mtd, struct erase_info *info) +{ + /* We do our best 8) */ + return -EROFS; +} + static int __init map_rom_init(void) { register_mtd_chip_driver(&maprom_chipdrv); -- cgit v1.2.3-55-g7522 From 3afd522de8d8ec446efe957b86e4f63e3dd8ce9d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 19 Jan 2009 00:15:13 +0100 Subject: [MTD] slram: Handle negative devlength correctly A negative devlength won't get noticed and clean up: Signed-off-by: Roel Kluin Signed-off-by: David Woodhouse --- drivers/mtd/devices/slram.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index a425d09f35a0..00248e81ecd5 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -267,22 +267,28 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength) if (*(szlength) != '+') { devlength = simple_strtoul(szlength, &buffer, 0); devlength = handle_unit(devlength, buffer) - devstart; + if (devlength < devstart) + goto err_out; + + devlength -= devstart; } else { devlength = simple_strtoul(szlength + 1, &buffer, 0); devlength = handle_unit(devlength, buffer); } T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n", devname, devstart, devlength); - if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) { - E("slram: Illegal start / length parameter.\n"); - return(-EINVAL); - } + if (devlength % SLRAM_BLK_SZ != 0) + goto err_out; if ((devstart = register_device(devname, devstart, devlength))){ unregister_devices(); return((int)devstart); } return(0); + +err_out: + E("slram: Illegal length parameter.\n"); + return(-EINVAL); } #ifndef MODULE -- cgit v1.2.3-55-g7522 From 43f7392ba9e2585bf34f21399b1ed78692b5d437 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sat, 3 Jan 2009 23:56:27 +0100 Subject: intel-iommu: fix build error with INTR_REMAP=y and DMAR=n This fix should be safe since iommu->agaw is only used in intel-iommu.c. And this file is only compiled with DMAR=y. Signed-off-by: Joerg Roedel Signed-off-by: David Woodhouse --- drivers/pci/dmar.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index f5a662a50acb..2b4162d9ca30 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -491,7 +491,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) int map_size; u32 ver; static int iommu_allocated = 0; - int agaw; + int agaw = 0; iommu = kzalloc(sizeof(*iommu), GFP_KERNEL); if (!iommu) @@ -507,6 +507,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG); iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG); +#ifdef CONFIG_DMAR agaw = iommu_calculate_agaw(iommu); if (agaw < 0) { printk(KERN_ERR @@ -514,6 +515,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) iommu->seq_id); goto error; } +#endif iommu->agaw = agaw; /* the registers might be more than one page */ -- cgit v1.2.3-55-g7522 From 704126ad81b8cb7d3d70adb9ecb143f4d3fb38af Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Sun, 4 Jan 2009 16:28:52 +0800 Subject: VT-d: handle Invalidation Queue Error to avoid system hang When hardware detects any error with a descriptor from the invalidation queue, it stops fetching new descriptors from the queue until software clears the Invalidation Queue Error bit in the Fault Status register. Following fix handles the IQE so the kernel won't be trapped in an infinite loop. Signed-off-by: Yu Zhao Signed-off-by: David Woodhouse --- drivers/pci/dmar.c | 61 ++++++++++++++++++++++++++++++++------------ drivers/pci/intr_remapping.c | 21 ++++++++------- include/linux/intel-iommu.h | 3 ++- 3 files changed, 59 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 2b4162d9ca30..8d3e9c261061 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -573,19 +573,49 @@ static inline void reclaim_free_desc(struct q_inval *qi) } } +static int qi_check_fault(struct intel_iommu *iommu, int index) +{ + u32 fault; + int head; + struct q_inval *qi = iommu->qi; + int wait_index = (index + 1) % QI_LENGTH; + + fault = readl(iommu->reg + DMAR_FSTS_REG); + + /* + * If IQE happens, the head points to the descriptor associated + * with the error. No new descriptors are fetched until the IQE + * is cleared. + */ + if (fault & DMA_FSTS_IQE) { + head = readl(iommu->reg + DMAR_IQH_REG); + if ((head >> 4) == index) { + memcpy(&qi->desc[index], &qi->desc[wait_index], + sizeof(struct qi_desc)); + __iommu_flush_cache(iommu, &qi->desc[index], + sizeof(struct qi_desc)); + writel(DMA_FSTS_IQE, iommu->reg + DMAR_FSTS_REG); + return -EINVAL; + } + } + + return 0; +} + /* * Submit the queued invalidation descriptor to the remapping * hardware unit and wait for its completion. */ -void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) +int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) { + int rc = 0; struct q_inval *qi = iommu->qi; struct qi_desc *hw, wait_desc; int wait_index, index; unsigned long flags; if (!qi) - return; + return 0; hw = qi->desc; @@ -603,7 +633,8 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) hw[index] = *desc; - wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE; + wait_desc.low = QI_IWD_STATUS_DATA(QI_DONE) | + QI_IWD_STATUS_WRITE | QI_IWD_TYPE; wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]); hw[wait_index] = wait_desc; @@ -614,13 +645,11 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) qi->free_head = (qi->free_head + 2) % QI_LENGTH; qi->free_cnt -= 2; - spin_lock(&iommu->register_lock); /* * update the HW tail register indicating the presence of * new descriptors. */ writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG); - spin_unlock(&iommu->register_lock); while (qi->desc_status[wait_index] != QI_DONE) { /* @@ -630,15 +659,21 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) * a deadlock where the interrupt context can wait indefinitely * for free slots in the queue. */ + rc = qi_check_fault(iommu, index); + if (rc) + goto out; + spin_unlock(&qi->q_lock); cpu_relax(); spin_lock(&qi->q_lock); } - - qi->desc_status[index] = QI_DONE; +out: + qi->desc_status[index] = qi->desc_status[wait_index] = QI_DONE; reclaim_free_desc(qi); spin_unlock_irqrestore(&qi->q_lock, flags); + + return rc; } /* @@ -651,13 +686,13 @@ void qi_global_iec(struct intel_iommu *iommu) desc.low = QI_IEC_TYPE; desc.high = 0; + /* should never fail */ qi_submit_sync(&desc, iommu); } int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm, u64 type, int non_present_entry_flush) { - struct qi_desc desc; if (non_present_entry_flush) { @@ -671,10 +706,7 @@ int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm, | QI_CC_GRAN(type) | QI_CC_TYPE; desc.high = 0; - qi_submit_sync(&desc, iommu); - - return 0; - + return qi_submit_sync(&desc, iommu); } int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, @@ -704,10 +736,7 @@ int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih) | QI_IOTLB_AM(size_order); - qi_submit_sync(&desc, iommu); - - return 0; - + return qi_submit_sync(&desc, iommu); } /* diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index f78371b22529..45effc5726c0 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -207,7 +207,7 @@ int alloc_irte(struct intel_iommu *iommu, int irq, u16 count) return index; } -static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask) +static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask) { struct qi_desc desc; @@ -215,7 +215,7 @@ static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask) | QI_IEC_SELECTIVE; desc.high = 0; - qi_submit_sync(&desc, iommu); + return qi_submit_sync(&desc, iommu); } int map_irq_to_irte_handle(int irq, u16 *sub_handle) @@ -283,6 +283,7 @@ int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index) int modify_irte(int irq, struct irte *irte_modified) { + int rc; int index; struct irte *irte; struct intel_iommu *iommu; @@ -303,14 +304,15 @@ int modify_irte(int irq, struct irte *irte_modified) set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1)); __iommu_flush_cache(iommu, irte, sizeof(*irte)); - qi_flush_iec(iommu, index, 0); - + rc = qi_flush_iec(iommu, index, 0); spin_unlock(&irq_2_ir_lock); - return 0; + + return rc; } int flush_irte(int irq) { + int rc; int index; struct intel_iommu *iommu; struct irq_2_iommu *irq_iommu; @@ -326,10 +328,10 @@ int flush_irte(int irq) index = irq_iommu->irte_index + irq_iommu->sub_handle; - qi_flush_iec(iommu, index, irq_iommu->irte_mask); + rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask); spin_unlock(&irq_2_ir_lock); - return 0; + return rc; } struct intel_iommu *map_ioapic_to_ir(int apic) @@ -355,6 +357,7 @@ struct intel_iommu *map_dev_to_ir(struct pci_dev *dev) int free_irte(int irq) { + int rc = 0; int index, i; struct irte *irte; struct intel_iommu *iommu; @@ -375,7 +378,7 @@ int free_irte(int irq) if (!irq_iommu->sub_handle) { for (i = 0; i < (1 << irq_iommu->irte_mask); i++) set_64bit((unsigned long *)irte, 0); - qi_flush_iec(iommu, index, irq_iommu->irte_mask); + rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask); } irq_iommu->iommu = NULL; @@ -385,7 +388,7 @@ int free_irte(int irq) spin_unlock(&irq_2_ir_lock); - return 0; + return rc; } static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode) diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index c4f6c101dbcd..d2e3cbfba14f 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -194,6 +194,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) /* FSTS_REG */ #define DMA_FSTS_PPF ((u32)2) #define DMA_FSTS_PFO ((u32)1) +#define DMA_FSTS_IQE (1 << 4) #define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff) /* FRCD_REG, 32 bits access */ @@ -328,7 +329,7 @@ extern int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, unsigned int size_order, u64 type, int non_present_entry_flush); -extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); +extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t); -- cgit v1.2.3-55-g7522 From 34aeb43e2d3800f4d8f96feb9f1b49cd506679d5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 10 Feb 2009 09:04:00 +0000 Subject: serial: sh-sci: fix overrun error handling for SH7785 SCIF. There was a typo for the overrun bit definition, causing it not to be handled correctly on SH7785, fix it up. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 3599828b9766..022e89ffec1d 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -133,7 +133,7 @@ # define SCSPTR3 0xffed0024 /* 16 bit SCIF */ # define SCSPTR4 0xffee0024 /* 16 bit SCIF */ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ -# define SCIF_OPER 0x0001 /* Overrun error bit */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ defined(CONFIG_CPU_SUBTYPE_SH7203) || \ -- cgit v1.2.3-55-g7522 From e480814f138cd5d78a8efe397756ba6b6518fdb6 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 11 Feb 2009 13:12:17 -0800 Subject: [MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device} commit 176bf2e0f10ecf1d20a97db3bd5bb2e6ba0b5668 ("physmap: fix leak of memory returned by parse_mtd_partitions") deals with a memory leak and frees the pointer array of mtd_partition after the call to add_mtd_partitions(). the problem is that mtd_table[x]->name still points to the freed memory. Aldo physmap_flash_remove() should call del_mtd_partitions() or del_mtd_device() only once. Signed-off-by: Atsushi Nemoto Reported-by: Matthias Kaehlcke Tested-by: Matthias Kaehlcke Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/maps/physmap.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 87743661d48e..4b122e7ab4b3 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -29,6 +29,7 @@ struct physmap_flash_info { struct map_info map[MAX_RESOURCES]; #ifdef CONFIG_MTD_PARTITIONS int nr_parts; + struct mtd_partition *parts; #endif }; @@ -45,25 +46,26 @@ static int physmap_flash_remove(struct platform_device *dev) physmap_data = dev->dev.platform_data; -#ifdef CONFIG_MTD_CONCAT - if (info->cmtd != info->mtd[0]) { +#ifdef CONFIG_MTD_PARTITIONS + if (info->nr_parts) { + del_mtd_partitions(info->cmtd); + kfree(info->parts); + } else if (physmap_data->nr_parts) + del_mtd_partitions(info->cmtd); + else del_mtd_device(info->cmtd); +#else + del_mtd_device(info->cmtd); +#endif + +#ifdef CONFIG_MTD_CONCAT + if (info->cmtd != info->mtd[0]) mtd_concat_destroy(info->cmtd); - } #endif for (i = 0; i < MAX_RESOURCES; i++) { - if (info->mtd[i] != NULL) { -#ifdef CONFIG_MTD_PARTITIONS - if (info->nr_parts || physmap_data->nr_parts) - del_mtd_partitions(info->mtd[i]); - else - del_mtd_device(info->mtd[i]); -#else - del_mtd_device(info->mtd[i]); -#endif + if (info->mtd[i] != NULL) map_destroy(info->mtd[i]); - } } return 0; } @@ -86,9 +88,6 @@ static int physmap_flash_probe(struct platform_device *dev) int err = 0; int i; int devices_found = 0; -#ifdef CONFIG_MTD_PARTITIONS - struct mtd_partition *parts; -#endif physmap_data = dev->dev.platform_data; if (physmap_data == NULL) @@ -167,10 +166,11 @@ static int physmap_flash_probe(struct platform_device *dev) goto err_out; #ifdef CONFIG_MTD_PARTITIONS - err = parse_mtd_partitions(info->cmtd, part_probe_types, &parts, 0); + err = parse_mtd_partitions(info->cmtd, part_probe_types, + &info->parts, 0); if (err > 0) { - add_mtd_partitions(info->cmtd, parts, err); - kfree(parts); + add_mtd_partitions(info->cmtd, info->parts, err); + info->nr_parts = err; return 0; } -- cgit v1.2.3-55-g7522 From 10715b8751dfc403aeb7fbc35166417fa1664eda Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 11 Feb 2009 13:12:18 -0800 Subject: [MTD] [MAPS] blackfin: fix memory leak in error path Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/maps/bfin-async-flash.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 6fec86aaed7e..576611f605db 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -152,14 +152,18 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev) if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) { pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin); + kfree(state); return -EBUSY; } gpio_direction_output(state->enet_flash_pin, 1); pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8); state->mtd = do_map_probe(memory->name, &state->map); - if (!state->mtd) + if (!state->mtd) { + gpio_free(state->enet_flash_pin); + kfree(state); return -ENXIO; + } #ifdef CONFIG_MTD_PARTITIONS ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0); -- cgit v1.2.3-55-g7522 From ab00d68276295a1b4da7ad924a35a3566e9c2698 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 11 Feb 2009 13:12:19 -0800 Subject: [MTD] [MAPS] blackfin async requires complex mappings Correct a build error. bfin-async uses complex mappings and so needs it. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 0225cbbf22de..043d50fb6ef6 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -491,7 +491,7 @@ config MTD_PCMCIA_ANONYMOUS config MTD_BFIN_ASYNC tristate "Blackfin BF533-STAMP Flash Chip Support" - depends on BFIN533_STAMP && MTD_CFI + depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS select MTD_PARTITIONS default y help -- cgit v1.2.3-55-g7522 From 084eb960e81505680a9963665722d1bfd94af6a7 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Wed, 11 Feb 2009 13:24:19 -0800 Subject: intel-iommu: fix endless "Unknown DMAR structure type" loop I have a SuperMicro C2SBX motherboard with BIOS revision 1.0b. With vt-d enabled in the BIOS, Linux gets into an endless loop printing "DMAR:Unknown DMAR structure type" when booting. Here is the DMAR ACPI table: DMAR @ 0x7fe86dec 0000: 44 4d 41 52 98 00 00 00 01 6f 49 6e 74 65 6c 20 DMAR.....oIntel 0010: 4f 45 4d 44 4d 41 52 20 00 00 04 06 4c 4f 48 52 OEMDMAR ....LOHR 0020: 01 00 00 00 23 00 00 00 00 00 00 00 00 00 00 00 ....#........... 0030: 01 00 58 00 00 00 00 00 00 a0 e8 7f 00 00 00 00 ..X............. 0040: ff ff ef 7f 00 00 00 00 01 08 00 00 00 00 1d 00 ................ 0050: 01 08 00 00 00 00 1d 01 01 08 00 00 00 00 1d 02 ................ 0060: 01 08 00 00 00 00 1d 07 01 08 00 00 00 00 1a 00 ................ 0070: 01 08 00 00 00 00 1a 01 01 08 00 00 00 00 1a 02 ................ 0080: 01 08 00 00 00 00 1a 07 01 08 00 00 00 00 1a 07 ................ 0090: c0 00 68 00 04 10 66 60 ..h...f` Here are the messages printed by the kernel: DMAR:Host address width 36 DMAR:RMRR base: 0x000000007fe8a000 end: 0x000000007fefffff DMAR:Unknown DMAR structure type DMAR:Unknown DMAR structure type DMAR:Unknown DMAR structure type ... Although I not very familiar with ACPI, to me it looks like struct acpi_dmar_header::length == 0x0058 is incorrect, causing parse_dmar_table() to look at an invalid offset on the next loop. This offset happens to have struct acpi_dmar_header::length == 0x0000, which prevents the loop from ever terminating. This patch checks for this condition and bails out instead of looping forever. Signed-off-by: Tony Battersby Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/pci/dmar.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 8d3e9c261061..26c536b51c5a 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -330,6 +330,14 @@ parse_dmar_table(void) entry_header = (struct acpi_dmar_header *)(dmar + 1); while (((unsigned long)entry_header) < (((unsigned long)dmar) + dmar_tbl->length)) { + /* Avoid looping forever on bad ACPI tables */ + if (entry_header->length == 0) { + printk(KERN_WARNING PREFIX + "Invalid 0-length structure\n"); + ret = -EINVAL; + break; + } + dmar_table_print_dmar_entry(entry_header); switch (entry_header->type) { -- cgit v1.2.3-55-g7522 From e0ae4f5503235ba4449ffb5bcb4189edcef4d584 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 17 Feb 2009 20:40:09 -0800 Subject: PCI quirk: enable MSI on 8132 David reported that LSI SAS doesn't work with MSI. It turns out that his BIOS doesn't enable it, but the HT MSI 8132 does support HT MSI. Add quirk to enable it Cc: stable@kernel.org Reported-by: David Lang Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index baad093aafe3..a21e1c292ee4 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1981,7 +1981,6 @@ static void __devinit quirk_msi_ht_cap(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, quirk_msi_ht_cap); - /* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */ @@ -2032,6 +2031,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, + ht_enable_msi_mapping); + /* The P5N32-SLI Premium motherboard from Asus has a problem with msi * for the MCP55 NIC. It is not yet determined whether the msi problem * also affects other devices. As for now, turn off msi for this device. -- cgit v1.2.3-55-g7522 From 1dec6b054dd1fc780e18b815068bf5677409eb2d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 23 Feb 2009 11:51:59 -0800 Subject: PCI: don't enable too many HT MSI mappings Prakash reported that his c51-mcp51 ondie sound card doesn't work with MSI. But if he hacks out the HT-MSI quirk, MSI works fine. So this patch reworks the nv_msi_ht_cap_quirk(). It will now only enable ht_msi on own its root device, avoiding enabling it on devices following that root dev. Reported-by: Prakash Punnoor Tested-by: Prakash Punnoor Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 115 ++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 100 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a21e1c292ee4..a8523294e4ae 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2050,10 +2050,100 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15, nvenet_msi_disable); -static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) +static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev) { struct pci_dev *host_bridge; + int pos; + int i, dev_no; + int found = 0; + + dev_no = dev->devfn >> 3; + for (i = dev_no; i >= 0; i--) { + host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); + if (!host_bridge) + continue; + + pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); + if (pos != 0) { + found = 1; + break; + } + pci_dev_put(host_bridge); + } + + if (!found) + return; + + /* root did that ! */ + if (msi_ht_cap_enabled(host_bridge)) + goto out; + + ht_enable_msi_mapping(dev); + +out: + pci_dev_put(host_bridge); +} + +static void __devinit ht_disable_msi_mapping(struct pci_dev *dev) +{ + int pos, ttl = 48; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); + + pci_write_config_byte(dev, pos + HT_MSI_FLAGS, + flags & ~HT_MSI_FLAGS_ENABLE); + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } +} + +static int __devinit ht_check_msi_mapping(struct pci_dev *dev) +{ int pos, ttl = 48; + int found = 0; + + /* check if there is HT MSI cap or enabled on this device */ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (found < 1) + found = 1; + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + if (flags & HT_MSI_FLAGS_ENABLE) { + if (found < 2) { + found = 2; + break; + } + } + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } + + return found; +} + +static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) +{ + struct pci_dev *host_bridge; + int pos; + int found; + + /* check if there is HT MSI cap or enabled on this device */ + found = ht_check_msi_mapping(dev); + + /* no HT MSI CAP */ + if (found == 0) + return; /* * HT MSI mapping should be disabled on devices that are below @@ -2069,24 +2159,19 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); if (pos != 0) { /* Host bridge is to HT */ - ht_enable_msi_mapping(dev); + if (found == 1) { + /* it is not enabled, try to enable it */ + nv_ht_enable_msi_mapping(dev); + } return; } - /* Host bridge is not to HT, disable HT MSI mapping on this device */ - pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); - while (pos && ttl--) { - u8 flags; + /* HT MSI is not enabled */ + if (found == 1) + return; - if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, - &flags) == 0) { - dev_info(&dev->dev, "Disabling HT MSI mapping"); - pci_write_config_byte(dev, pos + HT_MSI_FLAGS, - flags & ~HT_MSI_FLAGS_ENABLE); - } - pos = pci_find_next_ht_capability(dev, pos, - HT_CAPTYPE_MSI_MAPPING); - } + /* Host bridge is not to HT, disable HT MSI mapping on this device */ + ht_disable_msi_mapping(dev); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk); -- cgit v1.2.3-55-g7522 From dbc7e1e567ef8cfc4b792ef6acb51d4ceb15746a Mon Sep 17 00:00:00 2001 From: Eric W. Biederman Date: Wed, 28 Jan 2009 19:31:18 -0800 Subject: PCI: pciehp: Handle interrupts that happen during initialization. Move the enabling of interrupts after all of the data structures are setup so that we can safely run the interrupt handler as soon as it is registered. Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Eric W. Biederman Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 2 ++ drivers/pci/hotplug/pciehp_core.c | 7 +++++++ drivers/pci/hotplug/pciehp_hpc.c | 15 +++++++-------- 3 files changed, 16 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index db85284ffb62..39ae37589fda 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -111,6 +111,7 @@ struct controller { int cmd_busy; unsigned int no_cmd_complete:1; unsigned int link_active_reporting:1; + unsigned int notification_enabled:1; }; #define INT_BUTTON_IGNORE 0 @@ -170,6 +171,7 @@ extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); extern void pciehp_queue_pushbutton_work(struct work_struct *work); struct controller *pcie_init(struct pcie_device *dev); +int pcie_init_notification(struct controller *ctrl); int pciehp_enable_slot(struct slot *p_slot); int pciehp_disable_slot(struct slot *p_slot); int pcie_enable_notification(struct controller *ctrl); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index c2485542f543..681e3912b821 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -434,6 +434,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ goto err_out_release_ctlr; } + /* Enable events after we have setup the data structures */ + rc = pcie_init_notification(ctrl); + if (rc) { + ctrl_err(ctrl, "Notification initialization failed\n"); + goto err_out_release_ctlr; + } + /* Check if slot is occupied */ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); t_slot->hpc_ops->get_adapter_status(t_slot, &value); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 71a8012886b0..7a16c6897bb9 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -934,7 +934,7 @@ static void pcie_disable_notification(struct controller *ctrl) ctrl_warn(ctrl, "Cannot disable software notification\n"); } -static int pcie_init_notification(struct controller *ctrl) +int pcie_init_notification(struct controller *ctrl) { if (pciehp_request_irq(ctrl)) return -1; @@ -942,13 +942,17 @@ static int pcie_init_notification(struct controller *ctrl) pciehp_free_irq(ctrl); return -1; } + ctrl->notification_enabled = 1; return 0; } static void pcie_shutdown_notification(struct controller *ctrl) { - pcie_disable_notification(ctrl); - pciehp_free_irq(ctrl); + if (ctrl->notification_enabled) { + pcie_disable_notification(ctrl); + pciehp_free_irq(ctrl); + ctrl->notification_enabled = 0; + } } static int pcie_init_slot(struct controller *ctrl) @@ -1110,13 +1114,8 @@ struct controller *pcie_init(struct pcie_device *dev) if (pcie_init_slot(ctrl)) goto abort_ctrl; - if (pcie_init_notification(ctrl)) - goto abort_slot; - return ctrl; -abort_slot: - pcie_cleanup_slot(ctrl); abort_ctrl: kfree(ctrl); abort: -- cgit v1.2.3-55-g7522 From 1f9f13c8d59c1d8da1a602b71d1ab96d1d37d69e Mon Sep 17 00:00:00 2001 From: Andrew Patterson Date: Fri, 20 Feb 2009 16:04:59 -0700 Subject: PCI: Enable PCIe AER only after checking firmware support The PCIe port driver currently sets the PCIe AER error reporting bits for any root or switch port without first checking to see if firmware will grant control. This patch moves setting these bits to the AER service driver aer_enable_port routine. The bits are then set for the root port and any downstream switch ports after the check for firmware support (aer_osc_setup) is made. The patch also unsets the bits in a similar fashion when the AER service driver is unloaded. Reviewed-by: Alex Chiang Signed-off-by: Andrew Patterson Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aerdrv_core.c | 48 +++++++++++++++++++++++++++++++------- drivers/pci/pcie/portdrv_pci.c | 2 -- 2 files changed, 39 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index aac7006949f1..d0c973685868 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -108,6 +108,34 @@ int pci_cleanup_aer_correct_error_status(struct pci_dev *dev) } #endif /* 0 */ + +static void set_device_error_reporting(struct pci_dev *dev, void *data) +{ + bool enable = *((bool *)data); + + if (dev->pcie_type != PCIE_RC_PORT && + dev->pcie_type != PCIE_SW_UPSTREAM_PORT && + dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT) + return; + + if (enable) + pci_enable_pcie_error_reporting(dev); + else + pci_disable_pcie_error_reporting(dev); +} + +/** + * set_downstream_devices_error_reporting - enable/disable the error reporting bits on the root port and its downstream ports. + * @dev: pointer to root port's pci_dev data structure + * @enable: true = enable error reporting, false = disable error reporting. + */ +static void set_downstream_devices_error_reporting(struct pci_dev *dev, + bool enable) +{ + set_device_error_reporting(dev, &enable); + pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable); +} + static int find_device_iter(struct device *device, void *data) { struct pci_dev *dev; @@ -525,15 +553,11 @@ void aer_enable_rootport(struct aer_rpc *rpc) pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, ®32); pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32); - /* Enable Root Port device reporting error itself */ - pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, ®16); - reg16 = reg16 | - PCI_EXP_DEVCTL_CERE | - PCI_EXP_DEVCTL_NFERE | - PCI_EXP_DEVCTL_FERE | - PCI_EXP_DEVCTL_URRE; - pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL, - reg16); + /* + * Enable error reporting for the root port device and downstream port + * devices. + */ + set_downstream_devices_error_reporting(pdev, true); /* Enable Root Port's interrupt in response to error messages */ pci_write_config_dword(pdev, @@ -553,6 +577,12 @@ static void disable_root_aer(struct aer_rpc *rpc) u32 reg32; int pos; + /* + * Disable error reporting for the root port device and downstream port + * devices. + */ + set_downstream_devices_error_reporting(pdev, false); + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); /* Disable Root's interrupt in response to error messages */ pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index f9b874eaeb9f..248b4db91552 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -97,8 +97,6 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev, pcie_portdrv_save_config(dev); - pci_enable_pcie_error_reporting(dev); - return 0; } -- cgit v1.2.3-55-g7522 From 09b4068a7fe442efc40e9dcbcf5ff37c3338ab15 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 25 Feb 2009 13:18:47 +1100 Subject: md/raid10: Don't skip more than 1 bitmap-chunk at a time during recovery. When doing recovery on a raid10 with a write-intent bitmap, we only need to recovery chunks that are flagged in the bitmap. However if we choose to skip a chunk as it isn't flag, the code currently skips the whole raid10-chunk, thus it might not recovery some blocks that need recovering. This patch fixes it. In case that is confusing, it might help to understand that there is a 'raid10 chunk size' which guides how data is distributed across the devices, and a 'bitmap chunk size' which says how much data corresponds to a single bit in the bitmap. This bug only affects cases where the bitmap chunk size is smaller than the raid10 chunk size. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/raid10.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 6736d6dff981..118f89e716ea 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2010,13 +2010,13 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i /* There is nowhere to write, so all non-sync * drives must be failed, so try the next chunk... */ - { - sector_t sec = max_sector - sector_nr; - sectors_skipped += sec; + if (sector_nr + max_sync < max_sector) + max_sector = sector_nr + max_sync; + + sectors_skipped += (max_sector - sector_nr); chunks_skipped ++; sector_nr = max_sector; goto skipped; - } } static int run(mddev_t *mddev) -- cgit v1.2.3-55-g7522 From 78200d45cde2a79c0d0ae0407883bb264caa3c18 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 25 Feb 2009 13:18:47 +1100 Subject: md/raid10: Don't call bitmap_cond_end_sync when we are doing recovery. For raid1/4/5/6, resync (fixing inconsistencies between devices) is very similar to recovery (rebuilding a failed device onto a spare). The both walk through the device addresses in order. For raid10 it can be quite different. resync follows the 'array' address, and makes sure all copies are the same. Recover walks through 'device' addresses and recreates each missing block. The 'bitmap_cond_end_sync' function allows the write-intent-bitmap (When present) to be updated to reflect a partially completed resync. It makes assumptions which mean that it does not work correctly for raid10 recovery at all. In particularly, it can cause bitmap-directed recovery of a raid10 to not recovery some of the blocks that need to be recovered. So move the call to bitmap_cond_end_sync into the resync path, rather than being in the common "resync or recovery" path. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/raid10.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 118f89e716ea..e1feb87afc6c 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1749,8 +1749,6 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i if (!go_faster && conf->nr_waiting) msleep_interruptible(1000); - bitmap_cond_end_sync(mddev->bitmap, sector_nr); - /* Again, very different code for resync and recovery. * Both must result in an r10bio with a list of bios that * have bi_end_io, bi_sector, bi_bdev set, @@ -1886,6 +1884,8 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i /* resync. Schedule a read for every block at this virt offset */ int count = 0; + bitmap_cond_end_sync(mddev->bitmap, sector_nr); + if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, mddev->degraded) && !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { -- cgit v1.2.3-55-g7522 From 73d5c38a9536142e062c35997b044e89166e063b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 25 Feb 2009 13:18:47 +1100 Subject: md: avoid races when stopping resync. There has been a race in raid10 and raid1 for a long time which has only recently started showing up due to a scheduler changed. When a sync_read request finishes, as soon as reschedule_retry is called, another thread can mark the resync request as having completed, so md_do_sync can finish, ->stop can be called, and ->conf can be freed. So using conf after reschedule_retry is not safe. Similarly, when finishing a sync_write, calling md_done_sync must be the last thing we do, as it allows a chain of events which will free conf and other data structures. The first of these requires action in raid10.c The second requires action in raid1.c and raid10.c Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/raid1.c | 3 ++- drivers/md/raid10.c | 7 ++++--- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 01e3cffd03b8..e2466425d9ca 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1237,8 +1237,9 @@ static void end_sync_write(struct bio *bio, int error) update_head_pos(mirror, r1_bio); if (atomic_dec_and_test(&r1_bio->remaining)) { - md_done_sync(mddev, r1_bio->sectors, uptodate); + sector_t s = r1_bio->sectors; put_buf(r1_bio); + md_done_sync(mddev, s, uptodate); } } diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index e1feb87afc6c..7301631abe04 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1236,6 +1236,7 @@ static void end_sync_read(struct bio *bio, int error) /* for reconstruct, we always reschedule after a read. * for resync, only after all reads */ + rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev); if (test_bit(R10BIO_IsRecover, &r10_bio->state) || atomic_dec_and_test(&r10_bio->remaining)) { /* we have read all the blocks, @@ -1243,7 +1244,6 @@ static void end_sync_read(struct bio *bio, int error) */ reschedule_retry(r10_bio); } - rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev); } static void end_sync_write(struct bio *bio, int error) @@ -1264,11 +1264,13 @@ static void end_sync_write(struct bio *bio, int error) update_head_pos(i, r10_bio); + rdev_dec_pending(conf->mirrors[d].rdev, mddev); while (atomic_dec_and_test(&r10_bio->remaining)) { if (r10_bio->master_bio == NULL) { /* the primary of several recovery bios */ - md_done_sync(mddev, r10_bio->sectors, 1); + sector_t s = r10_bio->sectors; put_buf(r10_bio); + md_done_sync(mddev, s, 1); break; } else { r10bio_t *r10_bio2 = (r10bio_t *)r10_bio->master_bio; @@ -1276,7 +1278,6 @@ static void end_sync_write(struct bio *bio, int error) r10_bio = r10_bio2; } } - rdev_dec_pending(conf->mirrors[d].rdev, mddev); } /* -- cgit v1.2.3-55-g7522 From 7c04d1d97a8d918b7ae2ef478229862b71a65f06 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 15:36:40 -0800 Subject: drm/i915: remove PLL debugging messages These are normal; we walk through different values looking for the right one, so why flood the screen with messages? Signed-off-by: Jesse Barnes Reviewed-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 65b635ce28c8..a2834276cb38 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -217,7 +217,7 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type) return false; } -#define INTELPllInvalid(s) do { DRM_DEBUG(s); return false; } while (0) +#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. -- cgit v1.2.3-55-g7522 From 37df96736bfe6f5fd9a141d62946e1083d73e712 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 15:36:42 -0800 Subject: drm/i915: handle bogus VBT panel timing We've seen cases in the wild where the VBT sync data is wrong, so add some code to fix it up in that case, taking care to make sure that the total is greater than the sync end. Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_bios.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 65be30dccc77..fc28e2bbd542 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -111,6 +111,12 @@ parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) panel_fixed_mode->clock = dvo_timing->clock * 10; panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + /* Some VBTs have bogus h/vtotal values */ + if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) + panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; + if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) + panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + drm_mode_set_name(panel_fixed_mode); dev_priv->vbt_mode = panel_fixed_mode; -- cgit v1.2.3-55-g7522 From c8766ac5933d6ee75e7ce379a1eb5ceb451fcb83 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 23 Feb 2009 08:44:33 -0800 Subject: drm: Fix shifts of EDID vsync offset/width fields. Signed-off-by: Linus Torvalds Reviewed-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 5a4d3244758a..e902b1cefc06 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -320,10 +320,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo); mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo; - mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) | + mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) | pt->vsync_offset_lo); mode->vsync_end = mode->vsync_start + - ((pt->vsync_pulse_width_hi << 8) | + ((pt->vsync_pulse_width_hi << 4) | pt->vsync_pulse_width_lo); mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo); -- cgit v1.2.3-55-g7522 From 7bec756c74b1a5079d5074144bb77a6b3e7d7783 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 23 Feb 2009 16:09:34 -0800 Subject: drm: disable encoders before re-routing them In some cases we may receive a mode config that has a different CRTC<->encoder map that the current configuration. In that case, we need to disable any re-routed encoders before setting the mode, otherwise they may not pick up the new CRTC (if the output types are incompatible for example). Tested-by: Kristian Høgsberg Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 76 ++++++++++++++++++++++++++++++++++++--- include/drm/drm_crtc_helper.h | 1 + 2 files changed, 73 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 733028b4d45e..1c3a8c557140 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -452,6 +452,59 @@ static void drm_setup_crtcs(struct drm_device *dev) kfree(modes); kfree(enabled); } + +/** + * drm_encoder_crtc_ok - can a given crtc drive a given encoder? + * @encoder: encoder to test + * @crtc: crtc to test + * + * Return false if @encoder can't be driven by @crtc, true otherwise. + */ +static bool drm_encoder_crtc_ok(struct drm_encoder *encoder, + struct drm_crtc *crtc) +{ + struct drm_device *dev; + struct drm_crtc *tmp; + int crtc_mask = 1; + + WARN(!crtc, "checking null crtc?"); + + dev = crtc->dev; + + list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) { + if (tmp == crtc) + break; + crtc_mask <<= 1; + } + + if (encoder->possible_crtcs & crtc_mask) + return true; + return false; +} + +/* + * Check the CRTC we're going to map each output to vs. its current + * CRTC. If they don't match, we have to disable the output and the CRTC + * since the driver will have to re-route things. + */ +static void +drm_crtc_prepare_encoders(struct drm_device *dev) +{ + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_encoder *encoder; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + encoder_funcs = encoder->helper_private; + /* Disable unused encoders */ + if (encoder->crtc == NULL) + (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); + /* Disable encoders whose CRTC is about to change */ + if (encoder_funcs->get_crtc && + encoder->crtc != (*encoder_funcs->get_crtc)(encoder)) + (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); + } +} + /** * drm_crtc_set_mode - set a mode * @crtc: CRTC to program @@ -547,6 +600,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, encoder_funcs->prepare(encoder); } + drm_crtc_prepare_encoders(dev); + crtc_funcs->prepare(crtc); /* Set up the DPLL and any encoders state that needs to adjust or depend @@ -617,7 +672,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) struct drm_device *dev; struct drm_crtc **save_crtcs, *new_crtc; struct drm_encoder **save_encoders, *new_encoder; - struct drm_framebuffer *old_fb; + struct drm_framebuffer *old_fb = NULL; bool save_enabled; bool mode_changed = false; bool fb_changed = false; @@ -668,9 +723,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) * and then just flip_or_move it */ if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ - if (set->crtc->fb == NULL) + if (set->crtc->fb == NULL) { + DRM_DEBUG("crtc has no fb, full mode set\n"); mode_changed = true; - else if ((set->fb->bits_per_pixel != + } else if ((set->fb->bits_per_pixel != set->crtc->fb->bits_per_pixel) || set->fb->depth != set->crtc->fb->depth) fb_changed = true; @@ -682,7 +738,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fb_changed = true; if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { - DRM_DEBUG("modes are different\n"); + DRM_DEBUG("modes are different, full mode set\n"); drm_mode_debug_printmodeline(&set->crtc->mode); drm_mode_debug_printmodeline(set->mode); mode_changed = true; @@ -708,6 +764,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) } if (new_encoder != connector->encoder) { + DRM_DEBUG("encoder changed, full mode switch\n"); mode_changed = true; connector->encoder = new_encoder; } @@ -734,10 +791,20 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (set->connectors[ro] == connector) new_crtc = set->crtc; } + + /* Make sure the new CRTC will work with the encoder */ + if (new_crtc && + !drm_encoder_crtc_ok(connector->encoder, new_crtc)) { + ret = -EINVAL; + goto fail_set_mode; + } if (new_crtc != connector->encoder->crtc) { + DRM_DEBUG("crtc changed, full mode switch\n"); mode_changed = true; connector->encoder->crtc = new_crtc; } + DRM_DEBUG("setting connector %d crtc to %p\n", + connector->base.id, new_crtc); } /* mode_set_base is not a required function */ @@ -781,6 +848,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fail_set_mode: set->crtc->enabled = save_enabled; + set->crtc->fb = old_fb; count = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (!connector->encoder) diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 0b0d236c2154..c7d4b2e606a5 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -76,6 +76,7 @@ struct drm_encoder_helper_funcs { void (*mode_set)(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); + struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder); /* detect for DAC style encoders */ enum drm_connector_status (*detect)(struct drm_encoder *encoder, struct drm_connector *connector); -- cgit v1.2.3-55-g7522 From b3f5e7329df1a508ac58ebe7509fb7a47b9eab6a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 19 Feb 2009 14:48:22 +0000 Subject: drm: Correct unbalanced drm_vblank_put() during mode setting. The first time we install a mode, the vblank will be disabled for a pipe and so drm_vblank_get() in drm_vblank_pre_modeset() will fail. As we unconditionally call drm_vblank_put() afterwards, the vblank reference counter becomes unbalanced. Signed-off-by: Chris Wilson Acked-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 3795dbc0f50c..93e677a481f5 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -435,6 +435,8 @@ EXPORT_SYMBOL(drm_vblank_get); */ void drm_vblank_put(struct drm_device *dev, int crtc) { + BUG_ON (atomic_read (&dev->vblank_refcount[crtc]) == 0); + /* Last user schedules interrupt disable */ if (atomic_dec_and_test(&dev->vblank_refcount[crtc])) mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ); @@ -460,8 +462,9 @@ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc) * so that interrupts remain enabled in the interim. */ if (!dev->vblank_inmodeset[crtc]) { - dev->vblank_inmodeset[crtc] = 1; - drm_vblank_get(dev, crtc); + dev->vblank_inmodeset[crtc] = 0x1; + if (drm_vblank_get(dev, crtc) == 0) + dev->vblank_inmodeset[crtc] |= 0x2; } } EXPORT_SYMBOL(drm_vblank_pre_modeset); @@ -473,9 +476,12 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc) if (dev->vblank_inmodeset[crtc]) { spin_lock_irqsave(&dev->vbl_lock, irqflags); dev->vblank_disable_allowed = 1; - dev->vblank_inmodeset[crtc] = 0; spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - drm_vblank_put(dev, crtc); + + if (dev->vblank_inmodeset[crtc] & 0x2) + drm_vblank_put(dev, crtc); + + dev->vblank_inmodeset[crtc] = 0; } } EXPORT_SYMBOL(drm_vblank_post_modeset); -- cgit v1.2.3-55-g7522 From d61e7380b402a481ab1fa8027068a24918f701c8 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 24 Feb 2009 20:31:53 -0500 Subject: drm: edid revision 0 is valid edid->revision == 0 should be valid (at least, so the error message indicates. :) and wikipedia seems to indicate that EDID 1.0 existed. We can dump the entire check, since edid->revision is a u8, so it can't ever be less than 0. Marko reports in RH bz#476735 that his monitor claims to be EDID 1.0, and therefore hits the check and is stuck at 800x600 because of it. Reported-by: Marko Ristola Signed-off-by: Kyle McMartin Acked-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index e902b1cefc06..a839a28d8ee6 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -125,7 +125,7 @@ static bool edid_is_valid(struct edid *edid) DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version); goto bad; } - if (edid->revision <= 0 || edid->revision > 3) { + if (edid->revision > 3) { DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision); goto bad; } -- cgit v1.2.3-55-g7522 From dd0910b3c71b253c08111110f0399b924a8d5853 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 25 Feb 2009 14:49:21 +1000 Subject: drm/i915: make hw page ioremap use ioremap_wc However we still have another issue with ioremap_wc not falling back properly or somehow doing something else stupid, this probably needs to be tracked down. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 2d797ffe8137..cc4649577a61 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -811,7 +811,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data, dev_priv->hws_map.flags = 0; dev_priv->hws_map.mtrr = 0; - drm_core_ioremap(&dev_priv->hws_map, dev); + drm_core_ioremap_wc(&dev_priv->hws_map, dev); if (dev_priv->hws_map.handle == NULL) { i915_dma_cleanup(dev); dev_priv->status_gfx_addr = 0; -- cgit v1.2.3-55-g7522 From e08fb4f6d1dc95eff5b3fc1d0412bcb5afcae7f2 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 25 Feb 2009 14:52:30 +1000 Subject: drm/i915: convert DRM_ERROR to DRM_DEBUG in phys object pwrite path This snuck in when I wrote phys object support. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 28b726d07a0c..85685bfd12da 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3548,7 +3548,7 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, user_data = (char __user *) (uintptr_t) args->data_ptr; obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset; - DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size); + DRM_DEBUG("obj_addr %p, %lld\n", obj_addr, args->size); ret = copy_from_user(obj_addr, user_data, args->size); if (ret) return -EFAULT; -- cgit v1.2.3-55-g7522 From 6aa03ab06978e97b3e0720f83280d7841051916b Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Wed, 25 Feb 2009 14:06:26 +0900 Subject: Fix iwlan DMA mapping direction When iwlan runs on IOMMU, IOMMU generates a lot of PTE write faults because PTE write bit is not set on some of PTE's. This is because iwlan driver calls DMA mapping with PCI_DMA_TODEVICE which is read only in mapping PTE. But iwlan device actually writes to the mapped page to update its contents. This issue is not exposed in swiotlb. But VT-d hardware can capture this fault and stop the fault transaction. The following patch fixes the issue. Signed-off-by: Fenghua Yu Reviewed-by: Bhavesh Davda Tested-by: Chris Wright Acked-by: Tomas Winkler Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/net/wireless/iwlwifi/iwl-tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index b0ee86c62685..ab13ff22a8c0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -148,7 +148,7 @@ static void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) pci_unmap_single(dev, pci_unmap_addr(&txq->cmd[index]->meta, mapping), pci_unmap_len(&txq->cmd[index]->meta, len), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) { @@ -964,7 +964,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) * within command buffer array. */ txcmd_phys = pci_map_single(priv->pci_dev, out_cmd, sizeof(struct iwl_cmd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys); pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd)); /* Add buffer containing Tx command and MAC(!) header to TFD's @@ -1115,7 +1115,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); phys_addr = pci_map_single(priv->pci_dev, out_cmd, - len, PCI_DMA_TODEVICE); + len, PCI_DMA_BIDIRECTIONAL); pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr); pci_unmap_len_set(&out_cmd->meta, len, len); phys_addr += offsetof(struct iwl_cmd, hdr); @@ -1212,7 +1212,7 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, pci_unmap_single(priv->pci_dev, pci_unmap_addr(&txq->cmd[cmd_idx]->meta, mapping), pci_unmap_len(&txq->cmd[cmd_idx]->meta, len), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { -- cgit v1.2.3-55-g7522 From 0af80c04e2f2e45ae09fceb17df8050f828a5c40 Mon Sep 17 00:00:00 2001 From: David Fries Date: Wed, 25 Feb 2009 20:28:21 +0100 Subject: ide: ide.c 'clear' fix, update "ide=nodma" documentation Documentation/kernel-parameters.txt - ide=nodma is no longer valid. drivers/ide/Kconfig - The module is ide-core.ko not ide. drivers/ide/ide.c - It took me a while to figure out what the arguments %d.%d:%d to nodma module parameter ment, so I added a comment to each. - Added a comment to each of the sscanf lines. - There is a bug, if j is 0 it would previously clear all the other bits except the current device, changed in three different places. mask &= (1 << i) should be mask &= ~(1 << i). Signed-off-by: David Fries [bart: s/disk/device/ in ide.c, beautify patch description] Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/kernel-parameters.txt | 6 ++++-- drivers/ide/Kconfig | 2 +- drivers/ide/ide.c | 11 ++++++++--- 3 files changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 319785b6dcb1..0ed3234125e3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file icn= [HW,ISDN] Format: [,[,[,]]] - ide= [HW] (E)IDE subsystem - Format: ide=nodma or ide=doubler + ide-core.nodma= [HW] (E)IDE subsystem + Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc + .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom + .chs .ignore_cable are additional options See Documentation/ide/ide.txt. idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 3dad2299d9c5..e072903b12f0 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -46,7 +46,7 @@ menuconfig IDE SMART parameters from disk drives. To compile this driver as a module, choose M here: the - module will be called ide. + module will be called ide-core.ko. For further information, please read . diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 258805da15c3..0920e3b0c962 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -337,6 +337,7 @@ static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) int a, b, i, j = 1; unsigned int *dev_param_mask = (unsigned int *)kp->arg; + /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */ if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 && sscanf(s, "%d.%d", &a, &b) != 2) return -EINVAL; @@ -349,7 +350,7 @@ static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) if (j) *dev_param_mask |= (1 << i); else - *dev_param_mask &= (1 << i); + *dev_param_mask &= ~(1 << i); return 0; } @@ -392,6 +393,8 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp) { int a, b, c = 0, h = 0, s = 0, i, j = 1; + /* controller . device (0 or 1) : Cylinders , Heads , Sectors */ + /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */ if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 && sscanf(str, "%d.%d:%d", &a, &b, &j) != 3) return -EINVAL; @@ -407,7 +410,7 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp) if (j) ide_disks |= (1 << i); else - ide_disks &= (1 << i); + ide_disks &= ~(1 << i); ide_disks_chs[i].cyl = c; ide_disks_chs[i].head = h; @@ -469,6 +472,8 @@ static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) { int i, j = 1; + /* controller (ignore) */ + /* controller : 1 (ignore) | 0 (use) */ if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) return -EINVAL; @@ -478,7 +483,7 @@ static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) if (j) ide_ignore_cable |= (1 << i); else - ide_ignore_cable &= (1 << i); + ide_ignore_cable &= ~(1 << i); return 0; } -- cgit v1.2.3-55-g7522 From 43a12216d3664a9fa6c8ceb398da6ef08fee7ff7 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 25 Feb 2009 20:28:22 +0100 Subject: amd74xx: device/vendor confusion Device and vendor ids were confused Signed-off-by: Roel Kluin Cc: Andrew Morton Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/amd74xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 69660a431cd9..77267c859965 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -166,7 +166,7 @@ static unsigned int init_chipset_amd74xx(struct pci_dev *dev) * Check for broken FIFO support. */ if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411) + dev->device == PCI_DEVICE_ID_AMD_VIPER_7411) t &= 0x0f; else t |= 0xf0; -- cgit v1.2.3-55-g7522 From f76bee16fc83f58d6c1b088977330f26ed7ae248 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 25 Feb 2009 20:28:22 +0100 Subject: atiixp: fix missing parentheses Fix missing parentheses so PIO/DMA timings for master device on the second channel are programmed correctly (IOW "8 0 24 16" offset values should be used instead of the current "8 0 16 16"). [ The bug went unnoticed because after PIO/DMA timings get programmed incorrectly for the third device they are overwritten with timings for the fourth device and since BIOS should also program timings for the third device everything should work fine until suspend/resume cycle or user requested transfer mode changes. ] Signed-off-by: Roel Kluin Cc: Sergei Shtylyov Cc: Andrew Morton [bart: update patch description] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/atiixp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c index b2735d28f5cc..ecd1e62ca91a 100644 --- a/drivers/ide/atiixp.c +++ b/drivers/ide/atiixp.c @@ -52,7 +52,7 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); unsigned long flags; - int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; + int timing_shift = (drive->dn ^ 1) * 8; u32 pio_timing_data; u16 pio_mode_data; @@ -85,7 +85,7 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); unsigned long flags; - int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; + int timing_shift = (drive->dn ^ 1) * 8; u32 tmp32; u16 tmp16; u16 udma_ctl = 0; -- cgit v1.2.3-55-g7522 From f38344b0a0898d2a8c13581ee61007719e16e1d7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 25 Feb 2009 20:28:22 +0100 Subject: it821x: remove dead URL Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/it821x.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index e1c4f5437396..13b8153112ed 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -5,9 +5,8 @@ * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. * - * Documentation available from - * http://www.ite.com.tw/pc/IT8212F_V04.pdf - * Some other documents are NDA. + * Documentation: + * Datasheet is freely available, some other documents under NDA. * * The ITE8212 isn't exactly a standard IDE controller. It has two * modes. In pass through mode then it is an IDE controller. In its smart -- cgit v1.2.3-55-g7522 From d3dd7107f4d843d0f01d0f77d49a7c5449130577 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 25 Feb 2009 20:28:23 +0100 Subject: ide-cd: document capacity hack Just copy the comment from drivers/scsi/sr.c::sr_done() (from which the capacity hack has been originated). Cc: Borislav Petkov Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 0bfeb0c79d6e..690475b834de 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -194,6 +194,14 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, bio_sectors = max(bio_sectors(failed_command->bio), 4U); sector &= ~(bio_sectors - 1); + /* + * The SCSI specification allows for the value + * returned by READ CAPACITY to be up to 75 2K + * sectors past the last readable block. + * Therefore, if we hit a medium error within the + * last 75 2K sectors, we decrease the saved size + * value. + */ if (sector < get_capacity(info->disk) && drive->probed_capacity - sector < 4 * 75) set_capacity(info->disk, sector); -- cgit v1.2.3-55-g7522 From 8fed43684174b68f04d01d1210fd00536af790df Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 25 Feb 2009 20:28:24 +0100 Subject: ide: fix refcounting in device drivers During host driver module removal del_gendisk() results in a final put on drive->gendev and freeing the drive by drive_release_dev(). Convert device drivers from using struct kref to use struct device so device driver's object holds reference on ->gendev and prevents drive from prematurely going away. Also fix ->remove methods to not erroneously drop reference on a host driver by using only put_device() instead of ide*_put(). Reported-by: Stanislaw Gruszka Tested-by: Stanislaw Gruszka Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 27 ++++++++++++++++++--------- drivers/ide/ide-cd.h | 2 +- drivers/ide/ide-gd.c | 26 +++++++++++++++++--------- drivers/ide/ide-gd.h | 2 +- drivers/ide/ide-tape.c | 29 +++++++++++++++++++---------- include/linux/ide.h | 2 +- 6 files changed, 57 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 690475b834de..ddfbea41d296 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -55,7 +55,7 @@ static DEFINE_MUTEX(idecd_ref_mutex); -static void ide_cd_release(struct kref *); +static void ide_cd_release(struct device *); static struct cdrom_info *ide_cd_get(struct gendisk *disk) { @@ -67,7 +67,7 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk) if (ide_device_get(cd->drive)) cd = NULL; else - kref_get(&cd->kref); + get_device(&cd->dev); } mutex_unlock(&idecd_ref_mutex); @@ -79,7 +79,7 @@ static void ide_cd_put(struct cdrom_info *cd) ide_drive_t *drive = cd->drive; mutex_lock(&idecd_ref_mutex); - kref_put(&cd->kref, ide_cd_release); + put_device(&cd->dev); ide_device_put(drive); mutex_unlock(&idecd_ref_mutex); } @@ -1798,15 +1798,17 @@ static void ide_cd_remove(ide_drive_t *drive) ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__); ide_proc_unregister_driver(drive, info->driver); - + device_del(&info->dev); del_gendisk(info->disk); - ide_cd_put(info); + mutex_lock(&idecd_ref_mutex); + put_device(&info->dev); + mutex_unlock(&idecd_ref_mutex); } -static void ide_cd_release(struct kref *kref) +static void ide_cd_release(struct device *dev) { - struct cdrom_info *info = to_ide_drv(kref, cdrom_info); + struct cdrom_info *info = to_ide_drv(dev, cdrom_info); struct cdrom_device_info *devinfo = &info->devinfo; ide_drive_t *drive = info->drive; struct gendisk *g = info->disk; @@ -2005,7 +2007,12 @@ static int ide_cd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&info->kref); + info->dev.parent = &drive->gendev; + info->dev.release = ide_cd_release; + dev_set_name(&info->dev, dev_name(&drive->gendev)); + + if (device_register(&info->dev)) + goto out_free_disk; info->drive = drive; info->driver = &ide_cdrom_driver; @@ -2019,7 +2026,7 @@ static int ide_cd_probe(ide_drive_t *drive) g->driverfs_dev = &drive->gendev; g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; if (ide_cdrom_setup(drive)) { - ide_cd_release(&info->kref); + put_device(&info->dev); goto failed; } @@ -2029,6 +2036,8 @@ static int ide_cd_probe(ide_drive_t *drive) add_disk(g); return 0; +out_free_disk: + put_disk(g); out_free_cd: kfree(info); failed: diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index ac40d6cb90a2..c878bfcf1116 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -80,7 +80,7 @@ struct cdrom_info { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; /* Buffer for table of contents. NULL if we haven't allocated a TOC buffer for this device yet. */ diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 7857b209c6df..047109419902 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -25,7 +25,7 @@ module_param(debug_mask, ulong, 0644); static DEFINE_MUTEX(ide_disk_ref_mutex); -static void ide_disk_release(struct kref *); +static void ide_disk_release(struct device *); static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) { @@ -37,7 +37,7 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) if (ide_device_get(idkp->drive)) idkp = NULL; else - kref_get(&idkp->kref); + get_device(&idkp->dev); } mutex_unlock(&ide_disk_ref_mutex); return idkp; @@ -48,7 +48,7 @@ static void ide_disk_put(struct ide_disk_obj *idkp) ide_drive_t *drive = idkp->drive; mutex_lock(&ide_disk_ref_mutex); - kref_put(&idkp->kref, ide_disk_release); + put_device(&idkp->dev); ide_device_put(drive); mutex_unlock(&ide_disk_ref_mutex); } @@ -66,17 +66,18 @@ static void ide_gd_remove(ide_drive_t *drive) struct gendisk *g = idkp->disk; ide_proc_unregister_driver(drive, idkp->driver); - + device_del(&idkp->dev); del_gendisk(g); - drive->disk_ops->flush(drive); - ide_disk_put(idkp); + mutex_lock(&ide_disk_ref_mutex); + put_device(&idkp->dev); + mutex_unlock(&ide_disk_ref_mutex); } -static void ide_disk_release(struct kref *kref) +static void ide_disk_release(struct device *dev) { - struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj); + struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj); ide_drive_t *drive = idkp->drive; struct gendisk *g = idkp->disk; @@ -348,7 +349,12 @@ static int ide_gd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&idkp->kref); + idkp->dev.parent = &drive->gendev; + idkp->dev.release = ide_disk_release; + dev_set_name(&idkp->dev, dev_name(&drive->gendev)); + + if (device_register(&idkp->dev)) + goto out_free_disk; idkp->drive = drive; idkp->driver = &ide_gd_driver; @@ -373,6 +379,8 @@ static int ide_gd_probe(ide_drive_t *drive) add_disk(g); return 0; +out_free_disk: + put_disk(g); out_free_idkp: kfree(idkp); failed: diff --git a/drivers/ide/ide-gd.h b/drivers/ide/ide-gd.h index a86779f0756b..b604bdd318a1 100644 --- a/drivers/ide/ide-gd.h +++ b/drivers/ide/ide-gd.h @@ -17,7 +17,7 @@ struct ide_disk_obj { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; unsigned int openers; /* protected by BKL for now */ /* Last failed packet command */ diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d7ecd3c79757..bb450a7608c2 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -169,7 +169,7 @@ typedef struct ide_tape_obj { ide_drive_t *drive; struct ide_driver *driver; struct gendisk *disk; - struct kref kref; + struct device dev; /* * failed_pc points to the last failed packet command, or contains @@ -267,7 +267,7 @@ static DEFINE_MUTEX(idetape_ref_mutex); static struct class *idetape_sysfs_class; -static void ide_tape_release(struct kref *); +static void ide_tape_release(struct device *); static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) { @@ -279,7 +279,7 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk) if (ide_device_get(tape->drive)) tape = NULL; else - kref_get(&tape->kref); + get_device(&tape->dev); } mutex_unlock(&idetape_ref_mutex); return tape; @@ -290,7 +290,7 @@ static void ide_tape_put(struct ide_tape_obj *tape) ide_drive_t *drive = tape->drive; mutex_lock(&idetape_ref_mutex); - kref_put(&tape->kref, ide_tape_release); + put_device(&tape->dev); ide_device_put(drive); mutex_unlock(&idetape_ref_mutex); } @@ -308,7 +308,7 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) mutex_lock(&idetape_ref_mutex); tape = idetape_devs[i]; if (tape) - kref_get(&tape->kref); + get_device(&tape->dev); mutex_unlock(&idetape_ref_mutex); return tape; } @@ -2256,15 +2256,17 @@ static void ide_tape_remove(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; ide_proc_unregister_driver(drive, tape->driver); - + device_del(&tape->dev); ide_unregister_region(tape->disk); - ide_tape_put(tape); + mutex_lock(&idetape_ref_mutex); + put_device(&tape->dev); + mutex_unlock(&idetape_ref_mutex); } -static void ide_tape_release(struct kref *kref) +static void ide_tape_release(struct device *dev) { - struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj); + struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj); ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; @@ -2407,7 +2409,12 @@ static int ide_tape_probe(ide_drive_t *drive) ide_init_disk(g, drive); - kref_init(&tape->kref); + tape->dev.parent = &drive->gendev; + tape->dev.release = ide_tape_release; + dev_set_name(&tape->dev, dev_name(&drive->gendev)); + + if (device_register(&tape->dev)) + goto out_free_disk; tape->drive = drive; tape->driver = &idetape_driver; @@ -2436,6 +2443,8 @@ static int ide_tape_probe(ide_drive_t *drive) return 0; +out_free_disk: + put_disk(g); out_free_tape: kfree(tape); failed: diff --git a/include/linux/ide.h b/include/linux/ide.h index 194da5a4b0d6..fe235b65207e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -663,7 +663,7 @@ typedef struct ide_drive_s ide_drive_t; #define to_ide_device(dev) container_of(dev, ide_drive_t, gendev) #define to_ide_drv(obj, cont_type) \ - container_of(obj, struct cont_type, kref) + container_of(obj, struct cont_type, dev) #define ide_drv_g(disk, cont_type) \ container_of((disk)->private_data, struct cont_type, driver) -- cgit v1.2.3-55-g7522 From 7ba07d16bd62f931efec1fc8e63bf1aeebfe42a9 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Wed, 11 Feb 2009 13:08:43 -0800 Subject: pata_it821x: resume from hibernation fails with RAID volume Hibernation didn't work for me since I started to use IT8212 controller. I did some debugging (booting with no_console_suspend init=/bin/sh). Found that resume fails (2.6.28) with "serial number mismatch 'some garbage' != 'some other garbage'" and "revalidation failed" messages. That's because the controller firmware fills different serial number in the IDENTIFY every boot. The patch below fixes the resume simply clearing the serial number. The proper fix would be probably to fill in the serial number of the RAID volume instead. I assume that there must be something like that stored on the drives but I don't know where. Fix resume on pata_it821x RAID volume by clearing the serial number in IDENTIFY data, which is otherwise different on each boot. Signed-off-by: Ondrej Zary Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_it821x.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index f1bb2f9fecbf..b05b86a912c5 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -557,6 +557,9 @@ static unsigned int it821x_read_id(struct ata_device *adev, id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ id[86] |= 0x0400; /* LBA48 on */ id[ATA_ID_MAJOR_VER] |= 0x1F; + /* Clear the serial number because it's different each boot + which breaks validation on resume */ + memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN); } return err_mask; } -- cgit v1.2.3-55-g7522 From 6be96ac15e4d913e1f48299db083ada5321803b2 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Thu, 19 Feb 2009 10:38:04 -0500 Subject: sata_mv: fix SoC interrupt breakage For some reason, sata_mv doesn't clear interrupt status during init when it's running on an SoC host adapter. If the bootloader has touched the SATA controller before starting Linux, Linux can end up enabling the SATA interrupt with events pending, which will cause the interrupt to be marked as spurious and then be disabled, which then breaks all further accesses to the controller. This patch makes the SoC path clear interrupt status on init like in the non-SoC case. Signed-off-by: Lennert Buytenhek Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 4ae1a4138b47..7007edd2d451 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -3114,19 +3114,17 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - if (!IS_SOC(hpriv)) { - /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + hpriv->irq_cause_ofs); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + hpriv->irq_cause_ofs); - /* and unmask interrupt generation for host regs */ - writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + /* and unmask interrupt generation for host regs */ + writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); - /* - * enable only global host interrupts for now. - * The per-port interrupts get done later as ports are set up. - */ - mv_set_main_irq_mask(host, 0, PCI_ERR); - } + /* + * enable only global host interrupts for now. + * The per-port interrupts get done later as ports are set up. + */ + mv_set_main_irq_mask(host, 0, PCI_ERR); done: return rc; } -- cgit v1.2.3-55-g7522 From c48052cc36e02fff6a9bb3cf83c4206b9127611f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 11 Feb 2009 13:08:41 -0800 Subject: [libata] pata_amd: program FIFO With 32bit PIO we can use the posted write buffers, but only for 32bit I/O cycles. This means we must disable the FIFO for ATAPI where a final 16bit cycle may occur. Rework the FIFO logic so that we disable the FIFO then selectively re-enable it when we set the timings on AMD devices. Also fix a case where we scribbled on PCI config 0x41 of Nvidia chips when we shouldn't. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_amd.c | 76 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 59 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 63719ab9ea44..115b1cd6dcf5 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.3.11" +#define DRV_VERSION "0.4.1" /** * timing_setup - shared timing computation and load @@ -145,6 +145,13 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline) return ata_sff_prereset(link, deadline); } +/** + * amd_cable_detect - report cable type + * @ap: port + * + * AMD controller/BIOS setups record the cable type in word 0x42 + */ + static int amd_cable_detect(struct ata_port *ap) { static const u32 bitmask[2] = {0x03, 0x0C}; @@ -157,6 +164,40 @@ static int amd_cable_detect(struct ata_port *ap) return ATA_CBL_PATA40; } +/** + * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI + * @ap: ATA interface + * @adev: ATA device + * + * Set the PCI fifo for this device according to the devices present + * on the bus at this point in time. We need to turn the post write buffer + * off for ATAPI devices as we may need to issue a word sized write to the + * device as the final I/O + */ + +static void amd_fifo_setup(struct ata_port *ap) +{ + struct ata_device *adev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 fifobit[2] = { 0xC0, 0x30}; + u8 fifo = fifobit[ap->port_no]; + u8 r; + + + ata_for_each_dev(adev, &ap->link, ENABLED) { + if (adev->class == ATA_DEV_ATAPI) + fifo = 0; + } + if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */ + fifo = 0; + + /* On the later chips the read prefetch bits become no-op bits */ + pci_read_config_byte(pdev, 0x41, &r); + r &= ~fifobit[ap->port_no]; + r |= fifo; + pci_write_config_byte(pdev, 0x41, r); +} + /** * amd33_set_piomode - set initial PIO mode data * @ap: ATA interface @@ -167,21 +208,25 @@ static int amd_cable_detect(struct ata_port *ap) static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 1); } static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 2); } static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 3); } static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 4); } @@ -397,6 +442,16 @@ static struct ata_port_operations nv133_port_ops = { .set_dmamode = nv133_set_dmamode, }; +static void amd_clear_fifo(struct pci_dev *pdev) +{ + u8 fifo; + /* Disable the FIFO, the FIFO logic will re-enable it as + appropriate */ + pci_read_config_byte(pdev, 0x41, &fifo); + fifo &= 0x0F; + pci_write_config_byte(pdev, 0x41, fifo); +} + static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info[10] = { @@ -503,14 +558,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (type < 3) ata_pci_bmdma_clear_simplex(pdev); - - /* Check for AMD7411 */ - if (type == 3) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); - + if (pdev->vendor == PCI_VENDOR_ID_AMD) + amd_clear_fifo(pdev); /* Cable detection on Nvidia chips doesn't work too well, * cache BIOS programmed UDMA mode. */ @@ -536,18 +585,11 @@ static int amd_reinit_one(struct pci_dev *pdev) return rc; if (pdev->vendor == PCI_VENDOR_ID_AMD) { - u8 fifo; - pci_read_config_byte(pdev, 0x41, &fifo); - if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); + amd_clear_fifo(pdev); if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 || pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401) ata_pci_bmdma_clear_simplex(pdev); } - ata_host_resume(host); return 0; } -- cgit v1.2.3-55-g7522 From c55af1f5abf606118b32e3ce9c3b1bbce5236e7e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 11 Feb 2009 13:08:42 -0800 Subject: [libata] pata_legacy: for VLB 32bit PIO don't try tricks with slop These devices are generally used with ATA anyway and it seems that some ATAPI will need us to issue the right number of words. Therefore as we can't switch mid burst on VLB devices we should only use 32bit I/O for suitable block sizes. Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 6c1d778b63a9..e3bc1b436284 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -283,9 +283,10 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { - if (ata_id_has_dword_io(dev->id)) { + int slop = buflen & 3; + /* 32bit I/O capable *and* we need to write a whole number of dwords */ + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) { struct ata_port *ap = dev->link->ap; - int slop = buflen & 3; unsigned long flags; local_irq_save(flags); @@ -735,7 +736,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, struct ata_port *ap = adev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id)) { + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) { if (rw == WRITE) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else -- cgit v1.2.3-55-g7522 From 5e4c91c84b194b26cf592779e451f4b5be777cba Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 23 Feb 2009 08:53:35 +0100 Subject: cciss: shorten 30s timeout on controller reset If reset_devices is set for kexec, then cciss will delay 30 seconds since the old 5i controller _may_ need that long to recover. Replace the long sleep with incremental sleep and tests to reduce the 30 seconds to worst case for 5i, so that other controllers will proceed quickly. Reviewed-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index d2cb67b61176..b5a061114630 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3611,11 +3611,15 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, schedule_timeout_uninterruptible(30*HZ); /* Now try to get the controller to respond to a no-op */ - for (i=0; i<12; i++) { + for (i=0; i<30; i++) { if (cciss_noop(pdev) == 0) break; - else - printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : "")); + + schedule_timeout_uninterruptible(HZ); + } + if (i == 30) { + printk(KERN_ERR "cciss: controller seems dead\n"); + return -EBUSY; } } -- cgit v1.2.3-55-g7522 From 9e973e64ac6dc504e6447d52193d4fff1a670156 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 24 Feb 2009 08:10:09 +0100 Subject: xen/blkfront: use blk_rq_map_sg to generate ring entries On occasion, the request will apparently have more segments than we fit into the ring. Jens says: > The second problem is that the block layer then appears to create one > too many segments, but from the dump it has rq->nr_phys_segments == > BLKIF_MAX_SEGMENTS_PER_REQUEST. I suspect the latter is due to > xen-blkfront not handling the merging on its own. It should check that > the new page doesn't form part of the previous page. The > rq_for_each_segment() iterates all single bits in the request, not dma > segments. The "easiest" way to do this is to call blk_rq_map_sg() and > then iterate the mapped sg list. That will give you what you are > looking for. > Here's a test patch, compiles but otherwise untested. I spent more > time figuring out how to enable XEN than to code it up, so YMMV! > Probably the sg list wants to be put inside the ring and only > initialized on allocation, then you can get rid of the sg on stack and > sg_init_table() loop call in the function. I'll leave that, and the > testing, to you. [Moved sg array into info structure, and initialize once. -J] Signed-off-by: Jens Axboe Signed-off-by: Jeremy Fitzhardinge --- drivers/block/xen-blkfront.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 918ef725de41..b6c8ce254359 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -82,6 +83,7 @@ struct blkfront_info enum blkif_state connected; int ring_ref; struct blkif_front_ring ring; + struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST]; unsigned int evtchn, irq; struct request_queue *rq; struct work_struct work; @@ -204,12 +206,11 @@ static int blkif_queue_request(struct request *req) struct blkfront_info *info = req->rq_disk->private_data; unsigned long buffer_mfn; struct blkif_request *ring_req; - struct req_iterator iter; - struct bio_vec *bvec; unsigned long id; unsigned int fsect, lsect; - int ref; + int i, ref; grant_ref_t gref_head; + struct scatterlist *sg; if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) return 1; @@ -238,12 +239,13 @@ static int blkif_queue_request(struct request *req) if (blk_barrier_rq(req)) ring_req->operation = BLKIF_OP_WRITE_BARRIER; - ring_req->nr_segments = 0; - rq_for_each_segment(bvec, req, iter) { - BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST); - buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page)); - fsect = bvec->bv_offset >> 9; - lsect = fsect + (bvec->bv_len >> 9) - 1; + ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg); + BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST); + + for_each_sg(info->sg, sg, ring_req->nr_segments, i) { + buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg))); + fsect = sg->offset >> 9; + lsect = fsect + (sg->length >> 9) - 1; /* install a grant reference. */ ref = gnttab_claim_grant_reference(&gref_head); BUG_ON(ref == -ENOSPC); @@ -254,16 +256,12 @@ static int blkif_queue_request(struct request *req) buffer_mfn, rq_data_dir(req) ); - info->shadow[id].frame[ring_req->nr_segments] = - mfn_to_pfn(buffer_mfn); - - ring_req->seg[ring_req->nr_segments] = + info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn); + ring_req->seg[i] = (struct blkif_request_segment) { .gref = ref, .first_sect = fsect, .last_sect = lsect }; - - ring_req->nr_segments++; } info->ring.req_prod_pvt++; @@ -622,6 +620,8 @@ static int setup_blkring(struct xenbus_device *dev, SHARED_RING_INIT(sring); FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE); + sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST); + err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring)); if (err < 0) { free_page((unsigned long)sring); -- cgit v1.2.3-55-g7522 From 86883c2736e9697a38080a31c2794fa1316fd68f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 26 Feb 2009 10:32:31 -0800 Subject: Make ieee1394_init a fs-initcall It needs to happen before any firewire driver actually registers itself, and that was previously handled by having the Makefile list the core ieee1394 files before the drivers. But now there are firewire drivers in drivers/media, and the Makefile games aren't enough. So just make ieee1394_init happen earlier in the init sequence, the way all other bus layers already do. Reported-and-tested-by: Ingo Molnar Cc: Stefan Richter Cc: Henrik Kurelid Cc: Mauro Carvalho Chehab Cc: Ben Backx Signed-off-by: Linus Torvalds --- drivers/ieee1394/ieee1394_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index 1028e725a27e..872338003721 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -1275,7 +1275,7 @@ static void __exit ieee1394_cleanup(void) unregister_chrdev_region(IEEE1394_CORE_DEV, 256); } -module_init(ieee1394_init); +fs_initcall(ieee1394_init); module_exit(ieee1394_cleanup); /* Exported symbols */ -- cgit v1.2.3-55-g7522 From b50be33e42e2c87812b30aee1a2b2a5ac6cb3ffa Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 27 Feb 2009 04:51:33 +0900 Subject: [MTD] [MAPS] Remove MODULE_DEVICE_TABLE() from ck804rom driver. We really don't want the BIOS flash mapping hacks to get automatically loaded. No idea why it isn't using pci_register_driver() though -- that should be fine... and is even _present_ but disabled by #if 0. Signed-off-by: David Woodhouse --- drivers/mtd/maps/ck804xrom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 5f7a245ed132..424f17d6ffd1 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -342,9 +342,9 @@ static struct pci_device_id ck804xrom_pci_tbl[] = { { 0, } }; +#if 0 MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl); -#if 0 static struct pci_driver ck804xrom_driver = { .name = MOD_NAME, .id_table = ck804xrom_pci_tbl, -- cgit v1.2.3-55-g7522 From bbe194433baeadc953f49e3795b41ffffc5486dd Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Thu, 26 Feb 2009 10:46:48 -0800 Subject: PCI: AMD 813x B2 devices do not need boot interrupt quirk Turns out that the new AMD 813x devices do not need the quirk_disable_amd_813x_boot_interrupt quirk to be run on them. If it is, no interrupts are seen on the PCI-X adapter. From: Stefan Assmann Reported-by: Jamie Wellnitz Tested-by: Jamie Wellnitz Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a8523294e4ae..f20d55368edb 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1584,6 +1584,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_ */ #define AMD_813X_MISC 0x40 #define AMD_813X_NOIOAMODE (1<<0) +#define AMD_813X_REV_B2 0x13 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) { @@ -1591,6 +1592,8 @@ static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) if (noioapicquirk) return; + if (dev->revision == AMD_813X_REV_B2) + return; pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); pci_config_dword &= ~AMD_813X_NOIOAMODE; -- cgit v1.2.3-55-g7522 From 7662b00c378fe638e84a853418cd833303fc050c Mon Sep 17 00:00:00 2001 From: Nicola Soranzo Date: Thu, 19 Feb 2009 13:41:56 -0300 Subject: V4L/DVB (10659): em28xx: register device to soundcard for sysfs As explained in "Writing an ALSA driver" (T. Iwai), audio drivers should set the struct device for the card before registering the card instance. This will add the correct /sys/class/sound/cardN/device symlink, so HAL can see the device and ConsoleKit sets its ACL permissions for the logged-in user. For em28xx audio capture cards found e.g. in Hauppauge WinTV-HVR-900 (R2), this patch fixes errors like: ALSA lib pcm_hw.c:1429:(_snd_pcm_hw_open) Invalid value for card Error opening audio: Permission denied when running mplayer as a normal user. Signed-off-by: Nicola Soranzo Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 5d882a44e3ee..2ac738fa6a07 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -463,6 +463,8 @@ static int em28xx_audio_init(struct em28xx *dev) pcm->info_flags = 0; pcm->private_data = dev; strcpy(pcm->name, "Empia 28xx Capture"); + + snd_card_set_dev(card, &dev->udev->dev); strcpy(card->driver, "Empia Em28xx Audio"); strcpy(card->shortname, "Em28xx Audio"); strcpy(card->longname, "Empia Em28xx Audio"); -- cgit v1.2.3-55-g7522 From 0ad675eb4533402fd7b03b25d1d4a0ab7a43ae6d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 23 Feb 2009 12:11:25 -0300 Subject: V4L/DVB (10663): soc-camera: fix S_CROP breakage on PXA and SuperH Recent format-negotiation patches caused S_CROP breakage in pxa_camera.c and sh_mobile_ceu_camera.c drivers, fix it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 26 +++++++++++++------------- drivers/media/video/sh_mobile_ceu_camera.c | 13 +++++-------- 2 files changed, 18 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index a1d6008efcbb..07c334f25aae 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1155,23 +1155,23 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct pxa_camera_dev *pcdev = ici->priv; - const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL; - const struct soc_camera_format_xlate *xlate; + const struct soc_camera_data_format *cam_fmt = NULL; + const struct soc_camera_format_xlate *xlate = NULL; struct soc_camera_sense sense = { .master_clock = pcdev->mclk, .pixel_clock_max = pcdev->ciclk / 4, }; - int ret, buswidth; + int ret; - xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); - if (!xlate) { - dev_warn(&ici->dev, "Format %x not found\n", pixfmt); - return -EINVAL; - } + if (pixfmt) { + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); + if (!xlate) { + dev_warn(&ici->dev, "Format %x not found\n", pixfmt); + return -EINVAL; + } - buswidth = xlate->buswidth; - host_fmt = xlate->host_fmt; - cam_fmt = xlate->cam_fmt; + cam_fmt = xlate->cam_fmt; + } /* If PCLK is used to latch data from the sensor, check sense */ if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN) @@ -1201,8 +1201,8 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, } if (pixfmt && !ret) { - icd->buswidth = buswidth; - icd->current_fmt = host_fmt; + icd->buswidth = xlate->buswidth; + icd->current_fmt = xlate->host_fmt; } return ret; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 9a2586b07a05..ddcb81d0b81a 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -603,21 +603,18 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, const struct soc_camera_format_xlate *xlate; int ret; + if (!pixfmt) + return icd->ops->set_fmt(icd, pixfmt, rect); + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (!xlate) { dev_warn(&ici->dev, "Format %x not found\n", pixfmt); return -EINVAL; } - switch (pixfmt) { - case 0: /* Only geometry change */ - ret = icd->ops->set_fmt(icd, pixfmt, rect); - break; - default: - ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect); - } + ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect); - if (pixfmt && !ret) { + if (!ret) { icd->buswidth = xlate->buswidth; icd->current_fmt = xlate->host_fmt; pcdev->camera_fmt = xlate->cam_fmt; -- cgit v1.2.3-55-g7522 From 382c5546d618f24dc7d6ae7ca33412083720efbf Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Mon, 23 Feb 2009 06:27:16 -0300 Subject: V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards With (some) Technisat cards you cannot run multiple DVB applications in parallel and switch the channel at the same time. There seems to be a problem on the interfaces or even inside the flexcop-device that can't handle interruption on the streaming interface. This patch adds a watchdog to check whether data is supposed to come in (streaming PIDs are requested) and if no data is seen within 400ms (default) it resets the streaming/pid-filtering hardware. This patch is urgently needed to support the rev 2.8 of the hardware and solves problem occassionally seen on older hardware. Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/flexcop-hw-filter.c | 1 + drivers/media/dvb/b2c2/flexcop-pci.c | 65 +++++++++++++++++++----------- drivers/media/dvb/b2c2/flexcop.c | 3 +- 3 files changed, 44 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c index b386cc66c6b3..451974ba32f3 100644 --- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c +++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c @@ -192,6 +192,7 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d return 0; } +EXPORT_SYMBOL(flexcop_pid_feed_control); void flexcop_hw_filter_init(struct flexcop_device *fc) { diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index 5b30dfc7846b..76e37fd96bb6 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -13,9 +13,9 @@ static int enable_pid_filtering = 1; module_param(enable_pid_filtering, int, 0444); MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1"); -static int irq_chk_intv; +static int irq_chk_intv = 100; module_param(irq_chk_intv, int, 0644); -MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging)."); +MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog."); #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG #define dprintk(level,args...) \ @@ -34,7 +34,9 @@ MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently jus static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS); +MODULE_PARM_DESC(debug, + "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))." + DEBSTATUS); #define DRIVER_VERSION "0.1" #define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" @@ -58,6 +60,8 @@ struct flexcop_pci { int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */ u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */ int count; + int count_prev; + int stream_problem; spinlock_t irq_lock; @@ -103,18 +107,32 @@ static void flexcop_pci_irq_check_work(struct work_struct *work) container_of(work, struct flexcop_pci, irq_check_work.work); struct flexcop_device *fc = fc_pci->fc_dev; - flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714); - - flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4); - - if (v.sram_dest_reg_714.net_ovflow_error) - deb_chk("sram net_ovflow_error\n"); - if (v.sram_dest_reg_714.media_ovflow_error) - deb_chk("sram media_ovflow_error\n"); - if (v.sram_dest_reg_714.cai_ovflow_error) - deb_chk("sram cai_ovflow_error\n"); - if (v.sram_dest_reg_714.cai_ovflow_error) - deb_chk("sram cai_ovflow_error\n"); + if (fc->feedcount) { + + if (fc_pci->count == fc_pci->count_prev) { + deb_chk("no IRQ since the last check\n"); + if (fc_pci->stream_problem++ == 3) { + struct dvb_demux_feed *feed; + + spin_lock_irq(&fc->demux.lock); + list_for_each_entry(feed, &fc->demux.feed_list, + list_head) { + flexcop_pid_feed_control(fc, feed, 0); + } + + list_for_each_entry(feed, &fc->demux.feed_list, + list_head) { + flexcop_pid_feed_control(fc, feed, 1); + } + spin_unlock_irq(&fc->demux.lock); + + fc_pci->stream_problem = 0; + } + } else { + fc_pci->stream_problem = 0; + fc_pci->count_prev = fc_pci->count; + } + } schedule_delayed_work(&fc_pci->irq_check_work, msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); @@ -216,16 +234,12 @@ static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff) flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); deb_irq("IRQ enabled\n"); + fc_pci->count_prev = fc_pci->count; + // fc_pci->active_dma1_addr = 0; // flexcop_dma_control_size_irq(fc,FC_DMA_1,1); - if (irq_chk_intv > 0) - schedule_delayed_work(&fc_pci->irq_check_work, - msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); } else { - if (irq_chk_intv > 0) - cancel_delayed_work(&fc_pci->irq_check_work); - flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); deb_irq("IRQ disabled\n"); @@ -299,8 +313,6 @@ static int flexcop_pci_init(struct flexcop_pci *fc_pci) IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0) goto err_pci_iounmap; - - fc_pci->init_state |= FC_PCI_INIT; return ret; @@ -375,6 +387,10 @@ static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work); + if (irq_chk_intv > 0) + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); + return ret; err_fc_exit: @@ -393,6 +409,9 @@ static void flexcop_pci_remove(struct pci_dev *pdev) { struct flexcop_pci *fc_pci = pci_get_drvdata(pdev); + if (irq_chk_intv > 0) + cancel_delayed_work(&fc_pci->irq_check_work); + flexcop_pci_dma_exit(fc_pci); flexcop_device_exit(fc_pci->fc_dev); flexcop_pci_exit(fc_pci); diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index 676413a915b4..91068952b502 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -212,8 +212,7 @@ void flexcop_reset_block_300(struct flexcop_device *fc) v210.sw_reset_210.Block_reset_enable = 0xb2; fc->write_ibi_reg(fc,sw_reset_210,v210); - msleep(1); - + udelay(1000); fc->write_ibi_reg(fc,ctrl_208,v208_save); } -- cgit v1.2.3-55-g7522 From 69e09c983e92cc8f4ebb9f145ba3b460f6374558 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 11 Feb 2009 13:20:44 -0800 Subject: Staging: rtl8187se: fix Kconfig dependencies rtl8187se uses wireless extensions so it needs to depend on WIRELESS_EXT (or select it). rtl8187se uses fields in struct net_device that are only present if CONFIG_COMPAT_NET_DEV_OPS=y, so it needs to depend on that symbol also. drivers/staging/rtl8187se/r8180_core.c:5973: error: 'struct net_device' has no member named 'wireless_handlers' drivers/staging/rtl8187se/r8180_core.c:5982: error: 'struct net_device' has no member named 'wireless_handlers' drivers/staging/rtl8187se/r8180_core.c:201: error: 'struct net_device' has no member named 'stop' drivers/staging/rtl8187se/r8180_core.c:4584: error: 'struct net_device' has no member named 'get_stats' drivers/staging/rtl8187se/r8180_core.c:5969: error: 'struct net_device' has no member named 'open' drivers/staging/rtl8187se/r8180_core.c:5970: error: 'struct net_device' has no member named 'stop' drivers/staging/rtl8187se/r8180_core.c:5972: error: 'struct net_device' has no member named 'tx_timeout' drivers/staging/rtl8187se/r8180_core.c:5974: error: 'struct net_device' has no member named 'do_ioctl' drivers/staging/rtl8187se/r8180_core.c:5975: error: 'struct net_device' has no member named 'set_multicast_list' drivers/staging/rtl8187se/r8180_core.c:5976: error: 'struct net_device' has no member named 'set_mac_address' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig index 79c225acd1ad..f636296b54bc 100644 --- a/drivers/staging/rtl8187se/Kconfig +++ b/drivers/staging/rtl8187se/Kconfig @@ -1,5 +1,6 @@ config RTL8187SE tristate "RealTek RTL8187SE Wireless LAN NIC driver" depends on PCI + depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS default N ---help--- -- cgit v1.2.3-55-g7522 From 096c55d1de39c0de526dfeb8a68ba3b0200e5a93 Mon Sep 17 00:00:00 2001 From: leandro Costantino Date: Tue, 17 Feb 2009 11:16:26 -0500 Subject: Staging: rtl8187se: Fix oops and memory poison caused by builtin ieee80211. when modprobe and removing rtl8187se ( just for testing, i do not have that card , and oops and a memory poison error happens on the builtin ieee80211 of that driver. I dont know if they will port it to the current ieeee80221 instead of the builtin ones, but just in case i attach a proposed fix for that problem. - Change for loop on ieee80211_crypto_deinit for list_for_each_safe to remove items. Is there an spinlock needed here? - Call ieee80211_crypto_deinit after exiting all registerd crypto protocols. Signed-off-by: Costantino Leandro Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c | 19 ++++++++++--------- drivers/staging/rtl8187se/r8180_core.c | 2 +- 2 files changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c index af64cfbe16db..7370296225e1 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c @@ -234,20 +234,21 @@ out: void ieee80211_crypto_deinit(void) { struct list_head *ptr, *n; + struct ieee80211_crypto_alg *alg = NULL; if (hcrypt == NULL) return; - for (ptr = hcrypt->algs.next, n = ptr->next; ptr != &hcrypt->algs; - ptr = n, n = ptr->next) { - struct ieee80211_crypto_alg *alg = - (struct ieee80211_crypto_alg *) ptr; - list_del(ptr); - printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm " - "'%s' (deinit)\n", alg->ops->name); - kfree(alg); + list_for_each_safe(ptr, n, &hcrypt->algs) { + alg = list_entry(ptr, struct ieee80211_crypto_alg, list); + if (alg) { + list_del(ptr); + printk(KERN_DEBUG + "ieee80211_crypt: unregistered algorithm '%s' (deinit)\n", + alg->ops->name); + kfree(alg); + } } - kfree(hcrypt); } diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 94534955e38b..66de5cc8ddf1 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -6161,10 +6161,10 @@ static void __exit rtl8180_pci_module_exit(void) { pci_unregister_driver (&rtl8180_pci_driver); rtl8180_proc_module_remove(); - ieee80211_crypto_deinit(); ieee80211_crypto_tkip_exit(); ieee80211_crypto_ccmp_exit(); ieee80211_crypto_wep_exit(); + ieee80211_crypto_deinit(); DMESG("Exiting"); } -- cgit v1.2.3-55-g7522 From 5789813e73220a0bfd85a44bc565a6ae624e8745 Mon Sep 17 00:00:00 2001 From: Costantino Leandro Date: Tue, 17 Feb 2009 11:10:48 -0500 Subject: Staging: panel: fix oops on panel_cleanup_module Check for null pardevice (not registered, ej: panel never attached, inexistent parport, etc. ) before calling parport_release, parport_unregister_device, and related funcs on module release. Signed-off-by: Costantino Leandro Acked-by: Willy Tarreau Signed-off-by: Greg Kroah-Hartman --- drivers/staging/panel/panel.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index ab69c1bf36a8..c2747bc88c6f 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -2164,19 +2164,20 @@ static void __exit panel_cleanup_module(void) if (scan_timer.function != NULL) del_timer(&scan_timer); - if (keypad_enabled) - misc_deregister(&keypad_dev); + if (pprt != NULL) { + if (keypad_enabled) + misc_deregister(&keypad_dev); + + if (lcd_enabled) { + panel_lcd_print("\x0cLCD driver " PANEL_VERSION + "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-"); + misc_deregister(&lcd_dev); + } - if (lcd_enabled) { - panel_lcd_print("\x0cLCD driver " PANEL_VERSION - "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-"); - misc_deregister(&lcd_dev); + /* TODO: free all input signals */ + parport_release(pprt); + parport_unregister_device(pprt); } - - /* TODO: free all input signals */ - - parport_release(pprt); - parport_unregister_device(pprt); parport_unregister_driver(&panel_driver); } -- cgit v1.2.3-55-g7522 From 05e361cae5e633c2b58967d1444cf6ae56662e5c Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 30 Jan 2009 10:05:25 +0100 Subject: Staging: w35und: fix registration with wlan stack Initialize few more fields in wireless device structure so that wireless core actually accepts our registration. Signed-off-by: Pavel Machek Acked-by: Pekka Enberg Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/wbusb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index b003f9a7e151..49f1bf0acfb0 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -369,9 +369,11 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id } dev->extra_tx_headroom = 12; /* FIXME */ - dev->flags = 0; + dev->flags = IEEE80211_HW_SIGNAL_UNSPEC; + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); dev->channel_change_time = 1000; + dev->max_signal = 100; dev->queues = 1; dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz; -- cgit v1.2.3-55-g7522 From acfa5110b83b171ec509eaf2d1a9e93a5f4709bd Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Fri, 30 Jan 2009 11:32:47 +0200 Subject: Staging: w35und: fix usb_control_msg() error handling in wb35_probe() If successful, the usb_control_msg() function returns the number of bytes transferred. Fix up wb35_probe() to only bail out if the function returns a negative number. Also, fix up ieee80211_alloc_hw() error code to ENOMEM; otherwise GCC complains that err might be undefined (and is right about that). Acked-by: Pavel Machek Reported-and-tested-by: Sandro Bonazzola Signed-off-by: Pekka Enberg Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/wbusb.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index 49f1bf0acfb0..f716b2e92b65 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -319,16 +319,18 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id struct usb_device *udev = interface_to_usbdev(intf); struct wbsoft_priv *priv; struct ieee80211_hw *dev; - int err; + int nr, err; usb_get_dev(udev); // 20060630.2 Check the device if it already be opened - err = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), - 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, - 0x0, 0x400, <mp, 4, HZ*100 ); - if (err) + nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), + 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, + 0x0, 0x400, <mp, 4, HZ*100 ); + if (nr < 0) { + err = nr; goto error; + } ltmp = cpu_to_le32(ltmp); if (ltmp) { // Is already initialized? @@ -337,8 +339,10 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id } dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); - if (!dev) + if (!dev) { + err = -ENOMEM; goto error; + } priv = dev->priv; -- cgit v1.2.3-55-g7522 From 9a6e184c804b33a2c2ea974efcd3c9798d30cb39 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Fri, 13 Feb 2009 16:14:39 +0800 Subject: USB: fsl_usb2_udc: fix potential queue head corruption Clear next TD field and status field in queue head initialization code to prevent unpredictable result caused by residue of usb reset. Signed-off-by: Li Yang Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_usb2_udc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index f3c6703cffda..d8d9a52a44b3 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -404,7 +404,10 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, } if (zlt) tmp |= EP_QUEUE_HEAD_ZLT_SEL; + p_QH->max_pkt_length = cpu_to_le32(tmp); + p_QH->next_dtd_ptr = 1; + p_QH->size_ioc_int_sts = 0; return; } -- cgit v1.2.3-55-g7522 From 9aa09d2f8f4bc440d6db1c3414d4009642875240 Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Sun, 8 Feb 2009 16:07:58 -0800 Subject: USB: EHCI: slow down ITD reuse Currently ITDs are immediately recycled whenever their URB completes. However, EHCI hardware can sometimes remember some ITD state. This means that when the ITD is reused before end-of-frame it may sometimes cause the hardware to reference bogus state. This patch defers reusing such ITDs by moving them into a new ehci member cached_itd_list. ITDs resting in cached_itd_list are moved back into their stream's free_list once scan_periodic() detects that the active frame has elapsed. This makes the snd_usb_us122l driver (in kernel since .28) work right when it's hooked up through EHCI. [ dbrownell@users.sourceforge.net: comment fixups ] Signed-off-by: Karsten Wiese Tested-by: Philippe Carriere Tested-by: Federico Briata Cc: stable Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 ++ drivers/usb/host/ehci-mem.c | 1 + drivers/usb/host/ehci-sched.c | 56 ++++++++++++++++++++++++++++++++++++------- drivers/usb/host/ehci.h | 6 +++++ 4 files changed, 57 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 4725d15d096f..e551bb38852b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -485,6 +485,7 @@ static int ehci_init(struct usb_hcd *hcd) * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; + INIT_LIST_HEAD(&ehci->cached_itd_list); if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; @@ -497,6 +498,7 @@ static int ehci_init(struct usb_hcd *hcd) ehci->reclaim = NULL; ehci->next_uframe = -1; + ehci->clock_frame = -1; /* * dedicate a qh for the async ring head, since we couldn't unlink diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 0431397836f6..10d52919abbb 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -128,6 +128,7 @@ static inline void qh_put (struct ehci_qh *qh) static void ehci_mem_cleanup (struct ehci_hcd *ehci) { + free_cached_itd_list(ehci); if (ehci->async) qh_put (ehci->async); ehci->async = NULL; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index a081ee65bde6..07bcb931021b 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1004,7 +1004,8 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0; stream->bEndpointAddress &= 0x0f; - stream->ep->hcpriv = NULL; + if (stream->ep) + stream->ep->hcpriv = NULL; if (stream->rescheduled) { ehci_info (ehci, "ep%d%s-iso rescheduled " @@ -1653,14 +1654,28 @@ itd_complete ( (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out"); } iso_stream_put (ehci, stream); - /* OK to recycle this ITD now that its completion callback ran. */ + done: usb_put_urb(urb); itd->urb = NULL; - itd->stream = NULL; - list_move(&itd->itd_list, &stream->free_list); - iso_stream_put(ehci, stream); - + if (ehci->clock_frame != itd->frame || itd->index[7] != -1) { + /* OK to recycle this ITD now. */ + itd->stream = NULL; + list_move(&itd->itd_list, &stream->free_list); + iso_stream_put(ehci, stream); + } else { + /* HW might remember this ITD, so we can't recycle it yet. + * Move it to a safe place until a new frame starts. + */ + list_move(&itd->itd_list, &ehci->cached_itd_list); + if (stream->refcount == 2) { + /* If iso_stream_put() were called here, stream + * would be freed. Instead, just prevent reuse. + */ + stream->ep->hcpriv = NULL; + stream->ep = NULL; + } + } return retval; } @@ -2101,6 +2116,20 @@ done: /*-------------------------------------------------------------------------*/ +static void free_cached_itd_list(struct ehci_hcd *ehci) +{ + struct ehci_itd *itd, *n; + + list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) { + struct ehci_iso_stream *stream = itd->stream; + itd->stream = NULL; + list_move(&itd->itd_list, &stream->free_list); + iso_stream_put(ehci, stream); + } +} + +/*-------------------------------------------------------------------------*/ + static void scan_periodic (struct ehci_hcd *ehci) { @@ -2115,10 +2144,17 @@ scan_periodic (struct ehci_hcd *ehci) * Touches as few pages as possible: cache-friendly. */ now_uframe = ehci->next_uframe; - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) + if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { clock = ehci_readl(ehci, &ehci->regs->frame_index); - else + clock_frame = (clock >> 3) % ehci->periodic_size; + } else { clock = now_uframe + mod - 1; + clock_frame = -1; + } + if (ehci->clock_frame != clock_frame) { + free_cached_itd_list(ehci); + ehci->clock_frame = clock_frame; + } clock %= mod; clock_frame = clock >> 3; @@ -2277,6 +2313,10 @@ restart: /* rescan the rest of this frame, then ... */ clock = now; clock_frame = clock >> 3; + if (ehci->clock_frame != clock_frame) { + free_cached_itd_list(ehci); + ehci->clock_frame = clock_frame; + } } else { now_uframe++; now_uframe %= mod; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index fb7054ccf4fc..262b00c9b334 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -87,6 +87,10 @@ struct ehci_hcd { /* one per controller */ int next_uframe; /* scan periodic, start here */ unsigned periodic_sched; /* periodic activity count */ + /* list of itds completed while clock_frame was still active */ + struct list_head cached_itd_list; + unsigned clock_frame; + /* per root hub port */ unsigned long reset_done [EHCI_MAX_ROOT_PORTS]; @@ -220,6 +224,8 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) } } +static void free_cached_itd_list(struct ehci_hcd *ehci); + /*-------------------------------------------------------------------------*/ #include -- cgit v1.2.3-55-g7522 From 29a46bf6f4f57df22f91573bb482a24237741347 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 10 Feb 2009 19:01:52 +0200 Subject: usb: gadget: obex: select correct ep descriptors We where selecting wrong ep descriptors causing some troubles while sending files over obex interface. The problem was a typo while usb_find_endpoint() was being called for HS endpoints. Acked-by: David Brownell Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_obex.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 80c2e7e9622f..38aa896cc5db 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -366,9 +366,9 @@ obex_bind(struct usb_configuration *c, struct usb_function *f) f->hs_descriptors = usb_copy_descriptors(hs_function); obex->hs.obex_in = usb_find_endpoint(hs_function, - f->descriptors, &obex_hs_ep_in_desc); + f->hs_descriptors, &obex_hs_ep_in_desc); obex->hs.obex_out = usb_find_endpoint(hs_function, - f->descriptors, &obex_hs_ep_out_desc); + f->hs_descriptors, &obex_hs_ep_out_desc); } /* Avoid letting this gadget enumerate until the userspace -- cgit v1.2.3-55-g7522 From 28fb66821f884870987a0b5ab064ef651d9f7c16 Mon Sep 17 00:00:00 2001 From: Jesse Sung Date: Fri, 20 Feb 2009 21:13:45 -0800 Subject: USB: option: add BenQ 3g modem information This patch addes the BenQ 3g modem support to the option driver. From: Jesse Sung Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bfd0b68ceccd..c454b52ede3e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -296,6 +296,9 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ERICSSON_VENDOR_ID 0x0bdb #define ERICSSON_PRODUCT_F3507G 0x1900 +#define BENQ_VENDOR_ID 0x04a5 +#define BENQ_PRODUCT_H10 0x4068 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -510,6 +513,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, + { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3-55-g7522 From 155df65ae11dfc322214c6f887185929c809df1b Mon Sep 17 00:00:00 2001 From: Dmitriy Taychenachev Date: Wed, 25 Feb 2009 12:36:51 +0800 Subject: USB: cdc-acm: add usb id for motomagx phones The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing combined ACM/BLAN USB configuration. Since it has Vendor Specific class, the corresponding drivers (cdc-acm, zaurus) can't find it just by interface info. This patch adds usb id so the cdc-acm driver can properly handle this combined device. Signed-off-by: Dmitriy Taychenachev Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 326dd7f65ee9..00cba28d5351 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1376,6 +1376,8 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, -- cgit v1.2.3-55-g7522 From 5d7a4755d53a5305d05d836d87ef7c9ff94d6fa7 Mon Sep 17 00:00:00 2001 From: Patrik Kullman Date: Tue, 24 Feb 2009 13:38:53 -0800 Subject: USB: serial: add support for second revision of Ericsson F3507G WWAN card I noticed that my revision of the F3507G WWAN card isn't listed in drivers/usb/serial/option.c Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c454b52ede3e..b7c132bded7f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -294,7 +294,8 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* Ericsson products */ #define ERICSSON_VENDOR_ID 0x0bdb -#define ERICSSON_PRODUCT_F3507G 0x1900 +#define ERICSSON_PRODUCT_F3507G_1 0x1900 +#define ERICSSON_PRODUCT_F3507G_2 0x1902 #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -512,7 +513,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, - { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, + { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) }, + { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ -- cgit v1.2.3-55-g7522 From c332b4e1bfd56fe9028d8ef9708cb06179dd1a23 Mon Sep 17 00:00:00 2001 From: Adam Richter Date: Wed, 18 Feb 2009 16:17:15 -0800 Subject: USB: Quirk for Hummingbird huc56s / Conexant ACM modem Signed-off-by: Adam J. Richter Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 00cba28d5351..b3d5a23ab56f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1378,6 +1378,13 @@ static struct usb_device_id acm_ids[] = { }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, + { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ + .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on + data interface instead of + communications interface. + Maybe we should define a new + quirk for this. */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, -- cgit v1.2.3-55-g7522 From 5126a2674ddac0804450f59da25a058cca629d38 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 23 Feb 2009 12:02:05 -0500 Subject: USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters This patch (as1219) adds the IGNORE_RESIDUE flag to the unusual_devs entries for Genesys Logic's USB-IDE adapter. Although this device usually gets the residue correct, there is one command crucial to the operation of CD and DVD drives which it messes up. Tested-by: Mike Lampard Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 50dc33a6065b..6f59c8e510ea 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -907,13 +907,13 @@ UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Optical", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Disk", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), /* Reported by Ben Efros */ UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, -- cgit v1.2.3-55-g7522 From ce459ec1d278b19be8e0719dbfd47dd1d6687bfb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Feb 2009 16:19:47 -0500 Subject: USB: g_file_storage: automatically disable stalls under Atmel This patch (as1220) automatically disables stalls when g_file_storage finds itself running with an Atmel device controller, because the Atmel hardware/driver isn't capable of halting bulk endpoints correctly. Reported-by: Stanislaw Gruszka Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index b10fa31cc915..1ab9dac7e12d 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -3879,7 +3879,11 @@ static int __init check_parameters(struct fsg_dev *fsg) mod_data.protocol_type = USB_SC_SCSI; mod_data.protocol_name = "Transparent SCSI"; - if (gadget_is_sh(fsg->gadget)) + /* Some peripheral controllers are known not to be able to + * halt bulk endpoints correctly. If one of them is present, + * disable stalls. + */ + if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget)) mod_data.can_stall = 0; if (mod_data.release == 0xffff) { // Parameter wasn't set -- cgit v1.2.3-55-g7522 From 54b9ed35aea88b05d711884a3c2dc21bba047bd8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 11 Feb 2009 22:31:12 -0800 Subject: USB: gadget: fix build error in omap_apollon_2420_defconfig In apollon case, it only used udc, so udc configuration should select USB_OTG_UTILS also. Signed-off-by: Kyungmin Park Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 3219d137340a..e55fef52a5dc 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -191,6 +191,7 @@ config USB_GADGET_OMAP boolean "OMAP USB Device Controller" depends on ARCH_OMAP select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG + select USB_OTG_UTILS if ARCH_OMAP help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 -- cgit v1.2.3-55-g7522 From 67f5a4ba9741fcef3f4db3509ad03565d9e33af2 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 20 Feb 2009 16:33:08 -0500 Subject: USB: usb_get_string should check the descriptor type This patch (as1218) fixes a problem with a radio-control joystick used in the "walkera 4#3" helicopter. This device responds to the initial Get-String-Descriptor request for string 0 (which is really the list of supported languages) by sending its config descriptor! The usb_get_string() routine needs to check whether it got the right type of descriptor. Oddly enough, this sort of check is already present in usb_get_descriptor(). The patch changes the error code from -EPROTO to -ENODATA, because -EPROTO shows up in so many other contexts to indicate a hardware failure rather than a firmware error. Signed-off-by: Alan Stern Tested-by: Guillermo Jarabo Cc: stable Signed-off-by: Greg Kroah-Hartman =================================================================== --- drivers/usb/core/message.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 31fb204f44c6..49e7f56e0d7f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -653,7 +653,7 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, if (result <= 0 && result != -ETIMEDOUT) continue; if (result > 1 && ((u8 *)buf)[1] != type) { - result = -EPROTO; + result = -ENODATA; continue; } break; @@ -696,8 +696,13 @@ static int usb_get_string(struct usb_device *dev, unsigned short langid, USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, (USB_DT_STRING << 8) + index, langid, buf, size, USB_CTRL_GET_TIMEOUT); - if (!(result == 0 || result == -EPIPE)) - break; + if (result == 0 || result == -EPIPE) + continue; + if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) { + result = -ENODATA; + continue; + } + break; } return result; } -- cgit v1.2.3-55-g7522 From 34f32c9701013ac5af89b82a6ae285e790b643e7 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 20 Feb 2009 13:45:17 -0800 Subject: usb: musb: make Davinci *work* in mainline Now that the musb build fixes for DaVinci got merged (RC3?), kick in the other bits needed to get it finally *working* in mainline: - Use clk_enable()/clk_disable() ... the "always enable USB clocks" code this originally relied on has since been removed. - Initialize the USB device only after the relevant I2C GPIOs are available, so the host side can properly enable VBUS. - Tweak init sequencing to cope with mainline's relatively late init of the I2C system bus for power switches, transceivers, and so on. Sanity tested on DM6664 EVM for host and peripheral modes; that system won't boot with CONFIG_PM enabled, so OTG can't yet be tested. Also verified on OMAP3. (Unrelated: correct the MODULE_PARM_DESC spelling of musb_debug.) Signed-off-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-davinci/board-evm.c | 6 +++--- arch/arm/mach-davinci/clock.c | 5 +++++ arch/arm/mach-davinci/usb.c | 1 + drivers/usb/musb/davinci.c | 15 ++++----------- drivers/usb/musb/musb_core.c | 8 ++++---- 5 files changed, 17 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index a957d239a683..38b6a9ce2a93 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); + /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + setup_usb(500, 8); + return 0; } @@ -417,9 +420,6 @@ static __init void davinci_evm_init(void) platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); - - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ - setup_usb(500, 8); } static __init void davinci_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 28f6dbc95bd7..abb92b7eca0c 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -230,6 +230,11 @@ static struct clk davinci_clks[] = { .rate = &commonrate, .lpsc = DAVINCI_LPSC_GPIO, }, + { + .name = "usb", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_USB, + }, { .name = "AEMIFCLK", .rate = &commonrate, diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 867ead2559ad..69680784448a 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -47,6 +47,7 @@ static struct musb_hdrc_platform_data usb_data = { #elif defined(CONFIG_USB_MUSB_HOST) .mode = MUSB_HOST, #endif + .clock = "usb", .config = &musb_config, }; diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 5a8fd5d57a11..2dc7606f319c 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -377,18 +377,8 @@ int __init musb_platform_init(struct musb *musb) u32 revision; musb->mregs += DAVINCI_BASE_OFFSET; -#if 0 - /* REVISIT there's something odd about clocking, this - * didn't appear do the job ... - */ - musb->clock = clk_get(pDevice, "usb"); - if (IS_ERR(musb->clock)) - return PTR_ERR(musb->clock); - status = clk_enable(musb->clock); - if (status < 0) - return -ENODEV; -#endif + clk_enable(musb->clock); /* returns zero if e.g. not clocked */ revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG); @@ -453,5 +443,8 @@ int musb_platform_exit(struct musb *musb) } phy_off(); + + clk_disable(musb->clock); + return 0; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 2cc34fa05b73..b120fdcd8894 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -115,7 +115,7 @@ unsigned musb_debug; -module_param(musb_debug, uint, S_IRUGO | S_IWUSR); +module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" @@ -2243,10 +2243,10 @@ static int __init musb_init(void) return platform_driver_probe(&musb_driver, musb_probe); } -/* make us init after usbcore and before usb - * gadget and host-side drivers start to register +/* make us init after usbcore and i2c (transceivers, regulators, etc) + * and before usb gadget and host-side drivers start to register */ -subsys_initcall(musb_init); +fs_initcall(musb_init); static void __exit musb_cleanup(void) { -- cgit v1.2.3-55-g7522 From c2c963217bb1e8d53622d41b9e9ae706d0d02c07 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sat, 21 Feb 2009 15:29:42 -0800 Subject: USB: musb: be careful with 64K+ transfer lengths (gadget side) request->actual is an unsigned and we should use the same variable type for fifo_count otherwise we might lose some data if request->length >= 64kbytes. [ dbrownell@users.sourceforge.net: fix compiler warning ] Signed-off-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 4ea305387981..c7ebd0867fcc 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -575,7 +575,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct usb_request *request = &req->request; struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; void __iomem *epio = musb->endpoints[epnum].regs; - u16 fifo_count = 0; + unsigned fifo_count = 0; u16 len = musb_ep->packet_sz; csr = musb_readw(epio, MUSB_RXCSR); @@ -687,7 +687,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) len, fifo_count, musb_ep->packet_sz); - fifo_count = min(len, fifo_count); + fifo_count = min_t(unsigned, len, fifo_count); #ifdef CONFIG_USB_TUSB_OMAP_DMA if (tusb_dma_omap() && musb_ep->dma) { -- cgit v1.2.3-55-g7522 From b7bdcb79de6de32e40dcc85a5e8c669bec2483d5 Mon Sep 17 00:00:00 2001 From: Dmitry Krivoschekov Date: Sat, 21 Feb 2009 15:30:15 -0800 Subject: USB: musb: fix musb_host_tx() for shared endpoint FIFO The input queue should be used for TX on endpoints which share FIFO hardware. The host TX path wasn't doing that. Shared FIFOs are most often configured for periodic endpoints, which are mostly used for RX/IN transfers ... that's probably how this bug managed to linger for a long time. [ dbrownell@users.sourceforge.net: update patch description ] Signed-off-by: Dmitry Krivoschekov Signed-off-by: Sergei Shtylyov Acked-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index a035ceccf950..b47ca948bcf4 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1161,7 +1161,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; void __iomem *epio = hw_ep->regs; - struct musb_qh *qh = hw_ep->out_qh; + struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh + : hw_ep->out_qh; u32 status = 0; void __iomem *mbase = musb->mregs; struct dma_channel *dma; -- cgit v1.2.3-55-g7522 From a2fd814e6a9e172f7077b68a2a9391bbde777a92 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:30:45 -0800 Subject: USB: musb: fix urb_dequeue() method The urb_dequeue() method forgets to unlink 'struct musb_qh' from the control or bulk schedules when the URB being cancelled is the only one queued to its endpoint. That will cause musb_advance_schedule() to block once it reaches 'struct musb_qh' with now empty URB list, so URBs queued for other endpoints after the one being dequeued will not be served. Fix by unlinking the QH from the list except when it's already being handled (typically by musb_giveback). Since a QH with an empty URB list is now supposed to be freed, do that. And remove a now-useless check from musb_advance_schedule(). [ dbrownell@users.sourceforge.net: update patch description, and fold in a dequeue() comment patch ] Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index b47ca948bcf4..e32323938e98 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -432,7 +432,7 @@ musb_advance_schedule(struct musb *musb, struct urb *urb, else qh = musb_giveback(qh, urb, urb->status); - if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) { + if (qh != NULL && qh->is_ready) { DBG(4, "... next ep%d %cX urb %p\n", hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh)); @@ -2038,9 +2038,9 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) goto done; /* Any URB not actively programmed into endpoint hardware can be - * immediately given back. Such an URB must be at the head of its + * immediately given back; that's any URB not at the head of an * endpoint queue, unless someday we get real DMA queues. And even - * then, it might not be known to the hardware... + * if it's at the head, it might not be known to the hardware... * * Otherwise abort current transfer, pending dma, etc.; urb->status * has already been updated. This is a synchronous abort; it'd be @@ -2079,6 +2079,15 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) qh->is_ready = 0; __musb_giveback(musb, urb, 0); qh->is_ready = ready; + + /* If nothing else (usually musb_giveback) is using it + * and its URB list has emptied, recycle this qh. + */ + if (ready && list_empty(&qh->hep->urb_list)) { + qh->hep->hcpriv = NULL; + list_del(&qh->ring); + kfree(qh); + } } else ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); done: -- cgit v1.2.3-55-g7522 From dc61d238b8c850c34632ae1fbbdea529f8c41d16 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:31:01 -0800 Subject: USB: musb: host endpoint_disable() oops fixes The musb_h_disable() routine can oops in some cases: - It's not safe to read hep->hcpriv outside musb->lock, since it gets changed on completion IRQ paths. - The list iterators aren't safe to use in that way; just remove the first element while !list_empty(), so deletions on other code paths can't make trouble. We need two "scrub the list" loops because only one branch should touch hardware and advance the schedule. [ dbrownell@users.sourceforge.net: massively simplify patch description; add key points as code comments ] Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index e32323938e98..c74ebadd4b9d 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2103,15 +2103,16 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) unsigned long flags; struct musb *musb = hcd_to_musb(hcd); u8 is_in = epnum & USB_DIR_IN; - struct musb_qh *qh = hep->hcpriv; - struct urb *urb, *tmp; + struct musb_qh *qh; + struct urb *urb; struct list_head *sched; - if (!qh) - return; - spin_lock_irqsave(&musb->lock, flags); + qh = hep->hcpriv; + if (qh == NULL) + goto exit; + switch (qh->type) { case USB_ENDPOINT_XFER_CONTROL: sched = &musb->control; @@ -2145,13 +2146,28 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) /* cleanup */ musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); - } else - urb = NULL; - /* then just nuke all the others */ - list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list) - musb_giveback(qh, urb, -ESHUTDOWN); + /* Then nuke all the others ... and advance the + * queue on hw_ep (e.g. bulk ring) when we're done. + */ + while (!list_empty(&hep->urb_list)) { + urb = next_urb(qh); + urb->status = -ESHUTDOWN; + musb_advance_schedule(musb, urb, qh->hw_ep, is_in); + } + } else { + /* Just empty the queue; the hardware is busy with + * other transfers, and since !qh->is_ready nothing + * will activate any of these as it advances. + */ + while (!list_empty(&hep->urb_list)) + __musb_giveback(musb, next_urb(qh), -ESHUTDOWN); + hep->hcpriv = NULL; + list_del(&qh->ring); + kfree(qh); + } +exit: spin_unlock_irqrestore(&musb->lock, flags); } -- cgit v1.2.3-55-g7522 From 51d9f3e100a8f8cc2be89d5f13d37de61e2da38a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:31:13 -0800 Subject: USB: musb: fix data toggle saving with shared FIFO For some strange reason the host side musb_giveback() decides that it's always got an IN transfer when the hardware endpoint is using a shared FIFO. This causes musb_save_toggle() to read the toggle state from the RXCSR register instead of TXCSR, and may also cause unneeded reloading of RX endpoint registers. Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index c74ebadd4b9d..fc79e76b3845 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb) static struct musb_qh * musb_giveback(struct musb_qh *qh, struct urb *urb, int status) { - int is_in; struct musb_hw_ep *ep = qh->hw_ep; struct musb *musb = ep->musb; + int is_in = usb_pipein(urb->pipe); int ready = qh->is_ready; - if (ep->is_shared_fifo) - is_in = 1; - else - is_in = usb_pipein(urb->pipe); - /* save toggle eagerly, for paranoia */ switch (qh->type) { case USB_ENDPOINT_XFER_BULK: -- cgit v1.2.3-55-g7522 From 3ecdb9acf343bbcf2bb2c287dc524ab709cfad7e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:31:23 -0800 Subject: USB: musb: be careful with 64K+ transfer lengths, host side Feeding 32-bit length cast down to 'u16' to min() to calculate the FIFO count in musb_host_tx() risks sending a short packet prematurely for transfer sizes over 64 KB. Similarly, although data transfer size shouldn't exceed 65535 bytes for the control endpoint, making musb_h_ep0_continue() more robust WRT URBs with possibly oversized buffer will not hurt either... Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index fc79e76b3845..23d3890fd54d 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -937,8 +937,8 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) switch (musb->ep0_stage) { case MUSB_EP0_IN: fifo_dest = urb->transfer_buffer + urb->actual_length; - fifo_count = min(len, ((u16) (urb->transfer_buffer_length - - urb->actual_length))); + fifo_count = min_t(size_t, len, urb->transfer_buffer_length - + urb->actual_length); if (fifo_count < len) urb->status = -EOVERFLOW; @@ -971,10 +971,9 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) } /* FALLTHROUGH */ case MUSB_EP0_OUT: - fifo_count = min(qh->maxpacket, ((u16) - (urb->transfer_buffer_length - - urb->actual_length))); - + fifo_count = min_t(size_t, qh->maxpacket, + urb->transfer_buffer_length - + urb->actual_length); if (fifo_count) { fifo_dest = (u8 *) (urb->transfer_buffer + urb->actual_length); @@ -1304,7 +1303,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) * packets before updating TXCSR ... other docs disagree ... */ /* PIO: start next packet in this URB */ - wLength = min(qh->maxpacket, (u16) wLength); + if (wLength > qh->maxpacket) + wLength = qh->maxpacket; musb_write_fifo(hw_ep, wLength, buf); qh->segsize = wLength; -- cgit v1.2.3-55-g7522 From 136733d6124a152ed2b61c3d38008c6581fc8685 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:31:35 -0800 Subject: USB: musb: use right poll limit for low speed devices Remove wrongly applied upper limit on the interrupt transfer interval for low speed devices (not much of an error per se, according to USB specs). Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 23d3890fd54d..6dbbd0786a6a 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1863,19 +1863,21 @@ static int musb_urb_enqueue( } qh->type_reg = type_reg; - /* precompute rxinterval/txinterval register */ - interval = min((u8)16, epd->bInterval); /* log encoding */ + /* Precompute RXINTERVAL/TXINTERVAL register */ switch (qh->type) { case USB_ENDPOINT_XFER_INT: - /* fullspeed uses linear encoding */ - if (USB_SPEED_FULL == urb->dev->speed) { - interval = epd->bInterval; - if (!interval) - interval = 1; + /* + * Full/low speeds use the linear encoding, + * high speed uses the logarithmic encoding. + */ + if (urb->dev->speed <= USB_SPEED_FULL) { + interval = max_t(u8, epd->bInterval, 1); + break; } /* FALLTHROUGH */ case USB_ENDPOINT_XFER_ISOC: - /* iso always uses log encoding */ + /* ISO always uses logarithmic encoding */ + interval = min_t(u8, epd->bInterval, 16); break; default: /* REVISIT we actually want to use NAK limits, hinting to the -- cgit v1.2.3-55-g7522 From 5c23c9078f8e3476982409b1075b54c8cd65e82c Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Sat, 21 Feb 2009 15:31:40 -0800 Subject: USB: musb: resume suspended root hub on disconnect If this is not done, khubd will not be informed of the disconnect and will assume the device is still there. Easily seen when a hub is connected with no device attached to it; it will autosuspend. When the hub is disconnected, it still shows up in /proc/bus/usb/devices Signed-off-by: Anand Gadiyar Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index b120fdcd8894..60cbaec1aa41 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -767,6 +767,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, #ifdef CONFIG_USB_MUSB_HDRC_HCD case OTG_STATE_A_HOST: case OTG_STATE_A_SUSPEND: + usb_hcd_resume_root_hub(musb_to_hcd(musb)); musb_root_disconnect(musb); if (musb->a_wait_bcon != 0) musb_platform_try_idle(musb, jiffies -- cgit v1.2.3-55-g7522 From e747951240b9f820b94fd5582663c66d798c8fd1 Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Sat, 21 Feb 2009 15:31:44 -0800 Subject: USB: musb: fix srp sysfs entry deletion The SRP sysfs attribute is dependent on gadget mode; any gadget may support SRP. But "rmmod musb_hdrc" didn't remove that attribute; fix. Signed-off-by: Vikram Pandita Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 60cbaec1aa41..af77e4659006 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1816,7 +1816,7 @@ static void musb_free(struct musb *musb) #ifdef CONFIG_SYSFS device_remove_file(musb->controller, &dev_attr_mode); device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC device_remove_file(musb->controller, &dev_attr_srp); #endif #endif @@ -2064,7 +2064,7 @@ fail2: #ifdef CONFIG_SYSFS device_remove_file(musb->controller, &dev_attr_mode); device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC device_remove_file(musb->controller, &dev_attr_srp); #endif #endif -- cgit v1.2.3-55-g7522 From dca17146f4b72b8966016c406d94ad3e48289b79 Mon Sep 17 00:00:00 2001 From: Ben Gardner Date: Fri, 27 Feb 2009 14:02:58 -0800 Subject: w1_ds2433: clear the validcrc flag after a write The w1_ds2433 driver does not read from the hardware if the CRC was valid on the last read. The validcrc flag should be cleared after a write so that the new value can be read. Signed-off-by: Ben Gardner Signed-off-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/slaves/w1_ds2433.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c index 858c16a544c2..139447148822 100644 --- a/drivers/w1/slaves/w1_ds2433.c +++ b/drivers/w1/slaves/w1_ds2433.c @@ -156,6 +156,9 @@ out_up: */ static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data) { +#ifdef CONFIG_W1_SLAVE_DS2433_CRC + struct w1_f23_data *f23 = sl->family_data; +#endif u8 wrbuf[4]; u8 rdbuf[W1_PAGE_SIZE + 3]; u8 es = (addr + len - 1) & 0x1f; @@ -196,7 +199,9 @@ static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data) /* Reset the bus to wake up the EEPROM (this may not be needed) */ w1_reset_bus(sl->master); - +#ifdef CONFIG_W1_SLAVE_DS2433_CRC + f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS)); +#endif return 0; } -- cgit v1.2.3-55-g7522 From 8ca2f156b06bdcbfd1ab543355279246d05e2499 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Fri, 27 Feb 2009 14:03:00 -0800 Subject: w1: add missing Kconfig/Makefile entries for DS2431 slave driver Signed-off-by: Herton Ronaldo Krzesinski Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/slaves/Kconfig | 6 ++++++ drivers/w1/slaves/Makefile | 1 + 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 8d0b1fb1e52e..1f51366417b9 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -16,6 +16,12 @@ config W1_SLAVE_SMEM Say Y here if you want to connect 1-wire simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire. +config W1_SLAVE_DS2431 + tristate "1kb EEPROM family support (DS2431)" + help + Say Y here if you want to use a 1-wire + 1kb EEPROM family device (DS2431) + config W1_SLAVE_DS2433 tristate "4kb EEPROM family support (DS2433)" help diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index 990f400b6d22..f1f51f19b129 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o +obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o -- cgit v1.2.3-55-g7522 From 31d8b5631f095cb7100cfccc95c801a2547ffe2b Mon Sep 17 00:00:00 2001 From: David Altobelli Date: Fri, 27 Feb 2009 14:03:09 -0800 Subject: hpilo: new pci device Future iLO devices will have an HP vendor id. Signed-off-by: David Altobelli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/hpilo.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index f26667a7abf7..cf991850f01b 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -710,6 +710,7 @@ out: static struct pci_device_id ilo_devices[] = { { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) }, + { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3307) }, { } }; MODULE_DEVICE_TABLE(pci, ilo_devices); @@ -758,7 +759,7 @@ static void __exit ilo_exit(void) class_destroy(ilo_class); } -MODULE_VERSION("0.06"); +MODULE_VERSION("1.0"); MODULE_ALIAS(ILO_NAME); MODULE_DESCRIPTION(ILO_NAME); MODULE_AUTHOR("David Altobelli "); -- cgit v1.2.3-55-g7522