From 12183a20a8baf009bf570ab3db45a27fd6b1fd03 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 21 Dec 2011 23:01:20 +0100 Subject: mtd: nand: fix typo in comment Funny one :) "Heck" fits somehow, too, but I am sure it was meant to be "Check". Signed-off-by: Wolfram Sang Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 35b4565050f1..8a393f9e6027 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2588,7 +2588,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, instr->state = MTD_ERASING; while (len) { - /* Heck if we have a bad block, we do not erase bad blocks! */ + /* Check if we have a bad block, we do not erase bad blocks! */ if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", -- cgit v1.2.3-55-g7522 From 9398d1ce09b9009996f7d2468e1d3c785fa6feda Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 4 Jan 2012 11:18:46 +0800 Subject: mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23 In MX28, if we do not reset the BCH module. The BCH module may becomes unstable when the board reboots for several thousands times. This bug has been catched in customer's production. The patch adds some comments (some from Wolfram Sang), and fixes it now. Also change gpmi_reset_block() to static. Signed-off-by: Huang Shijie Acked-by: Marek Vasut Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Cc: stable@kernel.org [3.1+] --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 2a56fc6f399a..c56f8e021b90 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -69,17 +69,19 @@ static int clear_poll_bit(void __iomem *addr, u32 mask) * [1] enable the module. * [2] reset the module. * - * In most of the cases, it's ok. But there is a hardware bug in the BCH block. + * In most of the cases, it's ok. + * But in MX23, there is a hardware bug in the BCH block (see erratum #2847). * If you try to soft reset the BCH block, it becomes unusable until * the next hard reset. This case occurs in the NAND boot mode. When the board * boots by NAND, the ROM of the chip will initialize the BCH blocks itself. * So If the driver tries to reset the BCH again, the BCH will not work anymore. - * You will see a DMA timeout in this case. + * You will see a DMA timeout in this case. The bug has been fixed + * in the following chips, such as MX28. * * To avoid this bug, just add a new parameter `just_enable` for * the mxs_reset_block(), and rewrite it here. */ -int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) +static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) { int ret; int timeout = 0x400; @@ -206,7 +208,15 @@ int bch_set_geometry(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = gpmi_reset_block(r->bch_regs, true); + /* + * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this + * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. + * On the other hand, the MX28 needs the reset, because one case has been + * seen where the BCH produced ECC errors constantly after 10000 + * consecutive reboots. The latter case has not been seen on the MX23 yet, + * still we don't know if it could happen there as well. + */ + ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this)); if (ret) goto err_out; -- cgit v1.2.3-55-g7522 From 48cfe37cc03f616e6c139796962e7ec677cde8a9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 21 Dec 2011 14:20:23 -0500 Subject: target: don't allocate bio headroom in iblock We never embedd the bio into a structure, so there is no need to allocate 64 bytes of headroom per bio. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_iblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index cc8e6b58ef20..628e877381d8 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -129,7 +129,7 @@ static struct se_device *iblock_create_virtdevice( /* * These settings need to be made tunable.. */ - ib_dev->ibd_bio_set = bioset_create(32, 64); + ib_dev->ibd_bio_set = bioset_create(32, 0); if (!ib_dev->ibd_bio_set) { pr_err("IBLOCK: Unable to create bioset()\n"); return ERR_PTR(-ENOMEM); -- cgit v1.2.3-55-g7522 From 9e08e34e3735ae057eb3834da3570995811b7eb9 Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Tue, 3 Jan 2012 17:12:57 -0800 Subject: target: Use correct preempted registration sense code The comments quote the right parts of the spec: * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. and * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED. Fix this. Signed-off-by: Marco Sanvido Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 429ad7291664..d14860ff2508 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -3120,7 +3120,7 @@ static int core_scsi3_pro_preempt( if (!calling_it_nexus) core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, - ASCQ_2AH_RESERVATIONS_PREEMPTED); + ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* @@ -3233,7 +3233,7 @@ static int core_scsi3_pro_preempt( * additional sense code set to REGISTRATIONS PREEMPTED; */ core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, - ASCQ_2AH_RESERVATIONS_PREEMPTED); + ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* -- cgit v1.2.3-55-g7522 From 6816966a8418b980481b4dced7eddd1796b145e8 Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Tue, 3 Jan 2012 17:12:58 -0800 Subject: target: Allow PERSISTENT RESERVE IN for non-reservation holder Initiators that aren't the active reservation holder should be able to do a PERSISTENT RESERVE IN command in all cases, so add it to the list of allowed CDBs in core_scsi3_pr_seq_non_holder(). Signed-off-by: Marco Sanvido Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index d14860ff2508..68c71cd7a88e 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -478,6 +478,7 @@ static int core_scsi3_pr_seq_non_holder( case READ_MEDIA_SERIAL_NUMBER: case REPORT_LUNS: case REQUEST_SENSE: + case PERSISTENT_RESERVE_IN: ret = 0; /*/ Allowed CDBs */ break; default: -- cgit v1.2.3-55-g7522 From 9db9da332250dbe662995703a4dcdd692112f0c3 Mon Sep 17 00:00:00 2001 From: roland@purestorage.com Date: Wed, 4 Jan 2012 15:59:58 -0800 Subject: target: Don't zero pages used for data buffers Doing alloc_page(GFP_KERNEL | __GFP_ZERO) to get pages used for data buffers wastes a lot of CPU clearing pages that will be quickly be overwritten by the actual data. However, for emulated control commands such as INQUIRY and so on, the code does assume that the buffer is zeroed. To avoid this CPU overhead, skip the __GFP_ZERO for commands that are actually moving data, ie cmds that have SCF_SCSI_DATA_SG_IO_CDB set. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d3ddd1361949..289bc0f125f9 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3516,6 +3516,7 @@ transport_generic_get_mem(struct se_cmd *cmd) u32 length = cmd->data_length; unsigned int nents; struct page *page; + gfp_t zero_flag; int i = 0; nents = DIV_ROUND_UP(length, PAGE_SIZE); @@ -3526,9 +3527,11 @@ transport_generic_get_mem(struct se_cmd *cmd) cmd->t_data_nents = nents; sg_init_table(cmd->t_data_sg, nents); + zero_flag = cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB ? 0 : __GFP_ZERO; + while (length) { u32 page_len = min_t(u32, length, PAGE_SIZE); - page = alloc_page(GFP_KERNEL | __GFP_ZERO); + page = alloc_page(GFP_KERNEL | zero_flag); if (!page) goto out; -- cgit v1.2.3-55-g7522 From 9fbc8909876a2160044e71d376848973b9bfdc3f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 9 Jan 2012 17:54:00 -0800 Subject: target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB} According to SPC-4, the sense key for commands that are failed with INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh). Without this patch, a tcm_loop LUN incorrectly gives: # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0 Sense Information: Fixed format, current; Sense key: Aborted Command Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 0b 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 While a real SCSI disk gives: Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 with the main point being that the real disk gives a sense key of ILLEGAL REQUEST (5h). Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 289bc0f125f9..2869fb7d2c05 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4451,8 +4451,8 @@ int transport_send_check_condition_and_sense( /* CURRENT ERROR */ buffer[offset] = 0x70; buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10; - /* ABORTED COMMAND */ - buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* INVALID FIELD IN CDB */ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24; break; @@ -4460,8 +4460,8 @@ int transport_send_check_condition_and_sense( /* CURRENT ERROR */ buffer[offset] = 0x70; buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10; - /* ABORTED COMMAND */ - buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* INVALID FIELD IN PARAMETER LIST */ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x26; break; -- cgit v1.2.3-55-g7522 From 91ec1d3535b2acf12c599045cc19ad9be3c6a47b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 13 Jan 2012 12:01:34 -0800 Subject: target: Add workaround for zero-length control CDB handling This patch adds a work-around for handling zero allocation length control CDBs (type SCF_SCSI_CONTROL_SG_IO_CDB) that was causing an OOPs with the following raw calls: # sg_raw -v /dev/sdd 3 0 0 0 0 0 # sg_raw -v /dev/sdd 0x1a 0 1 0 0 0 This patch will follow existing zero-length handling for data I/O and silently return with GOOD status. This addresses the zero length issue, but the proper long-term resolution for handling arbitary allocation lengths will be to refactor out data-phase handling in individual CDB emulation logic within target_core_cdb.c Reported-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 2869fb7d2c05..50d6911d4120 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3759,6 +3759,11 @@ transport_allocate_control_task(struct se_cmd *cmd) struct se_task *task; unsigned long flags; + /* Workaround for handling zero-length control CDBs */ + if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) && + !cmd->data_length) + return 0; + task = transport_generic_get_task(cmd, cmd->data_direction); if (!task) return -ENOMEM; @@ -3830,6 +3835,14 @@ int transport_generic_new_cmd(struct se_cmd *cmd) else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) { cmd->t_state = TRANSPORT_COMPLETE; atomic_set(&cmd->t_transport_active, 1); + + if (cmd->t_task_cdb[0] == REQUEST_SENSE) { + u8 ua_asc = 0, ua_ascq = 0; + + core_scsi3_ua_clear_for_request_sense(cmd, + &ua_asc, &ua_ascq); + } + INIT_WORK(&cmd->work, target_complete_ok_work); queue_work(target_completion_wq, &cmd->work); return 0; -- cgit v1.2.3-55-g7522 From e59a41b69a8e116d5ac8c95c4222f5a971f66bbd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 10 Jan 2012 14:16:57 +0100 Subject: target: avoid multiple outputs in scsi_dump_inquiry() The multiple calls to pr_debug() each with one letter results in a new line. This patch merges the multiple requests into one call per line so we don't have the multiple line cuts. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 50d6911d4120..e186f7db3860 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1255,32 +1255,34 @@ static void core_setup_task_attr_emulation(struct se_device *dev) static void scsi_dump_inquiry(struct se_device *dev) { struct t10_wwn *wwn = &dev->se_sub_dev->t10_wwn; + char buf[17]; int i, device_type; /* * Print Linux/SCSI style INQUIRY formatting to the kernel ring buffer */ - pr_debug(" Vendor: "); for (i = 0; i < 8; i++) if (wwn->vendor[i] >= 0x20) - pr_debug("%c", wwn->vendor[i]); + buf[i] = wwn->vendor[i]; else - pr_debug(" "); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Vendor: %s\n", buf); - pr_debug(" Model: "); for (i = 0; i < 16; i++) if (wwn->model[i] >= 0x20) - pr_debug("%c", wwn->model[i]); + buf[i] = wwn->model[i]; else - pr_debug(" "); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Model: %s\n", buf); - pr_debug(" Revision: "); for (i = 0; i < 4; i++) if (wwn->revision[i] >= 0x20) - pr_debug("%c", wwn->revision[i]); + buf[i] = wwn->revision[i]; else - pr_debug(" "); - - pr_debug("\n"); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Revision: %s\n", buf); device_type = dev->transport->get_device_type(dev); pr_debug(" Type: %s ", scsi_device_type(device_type)); -- cgit v1.2.3-55-g7522 From 1dd0a0674530da61cdbfadd88c96949b483a7c19 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 10 Jan 2012 14:16:58 +0100 Subject: target: use save/restore lock primitive in core_dec_lacl_count() It may happen that uasp will free the request in irq conntext, the callchain: uasp_cmd_release() -> transport_generic_free_cmd() -> core_dec_lacl_count() where the last function enables the IRQ. Those irqs are re-disabled later (due to the spin.*irq_restore) but in between we could get hurt. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 0c5992f0d946..00159a4e781f 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -320,11 +320,12 @@ int core_free_device_list_for_node( void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd) { struct se_dev_entry *deve; + unsigned long flags; - spin_lock_irq(&se_nacl->device_list_lock); + spin_lock_irqsave(&se_nacl->device_list_lock, flags); deve = &se_nacl->device_list[se_cmd->orig_fe_lun]; deve->deve_cmds--; - spin_unlock_irq(&se_nacl->device_list_lock); + spin_unlock_irqrestore(&se_nacl->device_list_lock, flags); } void core_update_device_list_access( -- cgit v1.2.3-55-g7522 From 8d9efe539cf78f6a90947d47100e4a86d907750f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 11 Jan 2012 21:43:38 +0100 Subject: target: fix return code of core_tpg_.*_lun - core_tpg_pre_addlun() returns always ERR_PTR() or the pointer, never NULL. The additional check for NULL in core_dev_add_lun() is not required. - core_tpg_pre_dellun() returns always ERR_PTR() or the pointer, never NULL. The check for NULL in core_dev_del_lun() is wrong. The third argument (int *) is never used, remove it. - core_dev_add_lun() returns always NULL or the pointer, never ERR_PTR. The check for IS_ERR() is not required. (nab: Convert core_dev_add_lun() use err.h macros for failure handling to be consistent with the rest of target_core_fabric_configfs.c callers) Signed-off-by: Sebastian Andrzej Siewior Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 19 ++++++++++--------- drivers/target/target_core_fabric_configfs.c | 4 ++-- drivers/target/target_core_internal.h | 2 +- drivers/target/target_core_tpg.c | 3 +-- 4 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 00159a4e781f..de5f4fea7f62 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1295,24 +1295,26 @@ struct se_lun *core_dev_add_lun( { struct se_lun *lun_p; u32 lun_access = 0; + int rc; if (atomic_read(&dev->dev_access_obj.obj_access_count) != 0) { pr_err("Unable to export struct se_device while dev_access_obj: %d\n", atomic_read(&dev->dev_access_obj.obj_access_count)); - return NULL; + return ERR_PTR(-EACCES); } lun_p = core_tpg_pre_addlun(tpg, lun); - if ((IS_ERR(lun_p)) || !lun_p) - return NULL; + if (IS_ERR(lun_p)) + return lun_p; if (dev->dev_flags & DF_READ_ONLY) lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; else lun_access = TRANSPORT_LUNFLAGS_READ_WRITE; - if (core_tpg_post_addlun(tpg, lun_p, lun_access, dev) < 0) - return NULL; + rc = core_tpg_post_addlun(tpg, lun_p, lun_access, dev); + if (rc < 0) + return ERR_PTR(rc); pr_debug("%s_TPG[%u]_LUN[%u] - Activated %s Logical Unit from" " CORE HBA: %u\n", tpg->se_tpg_tfo->get_fabric_name(), @@ -1349,11 +1351,10 @@ int core_dev_del_lun( u32 unpacked_lun) { struct se_lun *lun; - int ret = 0; - lun = core_tpg_pre_dellun(tpg, unpacked_lun, &ret); - if (!lun) - return ret; + lun = core_tpg_pre_dellun(tpg, unpacked_lun); + if (IS_ERR(lun)) + return PTR_ERR(lun); core_tpg_post_dellun(tpg, lun); diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c index 4f77cce22646..9a2ce11e1a6e 100644 --- a/drivers/target/target_core_fabric_configfs.c +++ b/drivers/target/target_core_fabric_configfs.c @@ -766,9 +766,9 @@ static int target_fabric_port_link( lun_p = core_dev_add_lun(se_tpg, dev->se_hba, dev, lun->unpacked_lun); - if (IS_ERR(lun_p) || !lun_p) { + if (IS_ERR(lun_p)) { pr_err("core_dev_add_lun() failed\n"); - ret = -EINVAL; + ret = PTR_ERR(lun_p); goto out; } diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 26f135e94f6e..45001364788a 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -90,7 +90,7 @@ void core_tpg_wait_for_nacl_pr_ref(struct se_node_acl *); struct se_lun *core_tpg_pre_addlun(struct se_portal_group *, u32); int core_tpg_post_addlun(struct se_portal_group *, struct se_lun *, u32, void *); -struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32, int *); +struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32 unpacked_lun); int core_tpg_post_dellun(struct se_portal_group *, struct se_lun *); /* target_core_transport.c */ diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c index b7668029bb31..06336ecd872d 100644 --- a/drivers/target/target_core_tpg.c +++ b/drivers/target/target_core_tpg.c @@ -807,8 +807,7 @@ static void core_tpg_shutdown_lun( struct se_lun *core_tpg_pre_dellun( struct se_portal_group *tpg, - u32 unpacked_lun, - int *ret) + u32 unpacked_lun) { struct se_lun *lun; -- cgit v1.2.3-55-g7522 From c1ce4bd56f2846de55043374598fd929ad3b711b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 16:04:15 -0800 Subject: iscsi-target: Fix reject release handling in iscsit_free_cmd() This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [] warn_slowpath_common+0x80/0x98 [ 131.191092] [] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [] __list_del_entry+0x8d/0x98 [ 131.191092] [] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [] ? schedule+0x55/0x57 [ 131.191092] [] kthread+0x7d/0x85 [ 131.191092] [] kernel_thread_helper+0x4/0x10 [ 131.191092] [] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [] ? gs_change+0x13/0x13 Reported-by: Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_util.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index a05ca1c4f01c..11287e1ece13 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -849,6 +849,17 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd) case ISCSI_OP_SCSI_TMFUNC: transport_generic_free_cmd(&cmd->se_cmd, 1); break; + case ISCSI_OP_REJECT: + /* + * Handle special case for REJECT when iscsi_add_reject*() has + * overwritten the original iscsi_opcode assignment, and the + * associated cmd->se_cmd needs to be released. + */ + if (cmd->se_cmd.se_tfo != NULL) { + transport_generic_free_cmd(&cmd->se_cmd, 1); + break; + } + /* Fall-through */ default: iscsit_release_cmd(cmd); break; -- cgit v1.2.3-55-g7522 From cd931ee62fd0258fc85c76a7c5499fe85e0f3436 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 17:11:54 -0800 Subject: iscsi-target: Fix double list_add with iscsit_alloc_buffs reject This patch fixes a bug where the iscsit_add_reject_from_cmd() call from a failure to iscsit_alloc_buffs() was incorrectly passing add_to_conn=1 and causing a double list_add after iscsi_cmd->i_list had already been added in iscsit_handle_scsi_cmd(). Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index ac44af165b27..6e070e0a8393 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1061,7 +1061,7 @@ attach_cmd: if (ret < 0) return iscsit_add_reject_from_cmd( ISCSI_REASON_BOOKMARK_NO_RESOURCES, - 1, 1, buf, cmd); + 1, 0, buf, cmd); /* * Check the CmdSN against ExpCmdSN/MaxCmdSN here if * the Immediate Bit is not set, and no Immediate -- cgit v1.2.3-55-g7522 From f8d48ae52eeec906d7fb42485eb26a5d305bab0a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 15 Jan 2012 14:30:24 +0300 Subject: iscsi-target: make one-bit bitfields unsigned Signed bitfields are a problem because instead of being 1 or 0 like you'd expect they are 0 and -1. It doesn't cause a problem in this case but sparse complains: drivers/target/iscsi/iscsi_target_core.h:564:56: error: dubious one-bit signed bitfield Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index f1a02dad05a0..ebf81fdbb5c5 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -561,8 +561,8 @@ struct iscsi_conn { struct hash_desc conn_tx_hash; /* Used for scheduling TX and RX connection kthreads */ cpumask_var_t conn_cpumask; - int conn_rx_reset_cpumask:1; - int conn_tx_reset_cpumask:1; + unsigned int conn_rx_reset_cpumask:1; + unsigned int conn_tx_reset_cpumask:1; /* list_head of struct iscsi_cmd for this connection */ struct list_head conn_cmd_list; struct list_head immed_queue_list; -- cgit v1.2.3-55-g7522 From e8904dc5008ef92f0f62391d6557f03f921eeb32 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 15 Jan 2012 19:33:30 +0100 Subject: iscsi-target: Fix up a few assignments A statement such as struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); has undefined behaviour since there are two assignments to 'na', strictly speaking (the order in which side-effects from the assignments take place is undefined since there's no intervening sequence point), and it looks unintentional in any case. Signed-off-by: Jesper Juhl Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_erl1.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index 255c0d67e898..27901e37c125 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -1238,7 +1238,7 @@ void iscsit_mod_dataout_timer(struct iscsi_cmd *cmd) { struct iscsi_conn *conn = cmd->conn; struct iscsi_session *sess = conn->sess; - struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); + struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); spin_lock_bh(&cmd->dataout_timeout_lock); if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) { @@ -1261,7 +1261,7 @@ void iscsit_start_dataout_timer( struct iscsi_conn *conn) { struct iscsi_session *sess = conn->sess; - struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); + struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); if (cmd->dataout_timer_flags & ISCSI_TF_RUNNING) return; -- cgit v1.2.3-55-g7522 From 4949314c7283ea4f9ade182ca599583b89f7edd6 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Mon, 16 Jan 2012 16:57:08 -0800 Subject: target: Allow control CDBs with data > 1 page We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by: Andy Grover Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_alua.c | 8 +++--- drivers/target/target_core_cdb.c | 28 ++++++++++----------- drivers/target/target_core_device.c | 4 +-- drivers/target/target_core_pr.c | 38 ++++++++++++++-------------- drivers/target/target_core_pscsi.c | 4 +-- drivers/target/target_core_transport.c | 45 +++++++++++++++++++++++++--------- include/target/target_core_backend.h | 4 +-- include/target/target_core_base.h | 1 + 8 files changed, 78 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 1b1edd14f4bf..01a2691dfb47 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -78,7 +78,7 @@ int target_emulate_report_target_port_groups(struct se_task *task) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); spin_lock(&su_dev->t10_alua.tg_pt_gps_lock); list_for_each_entry(tg_pt_gp, &su_dev->t10_alua.tg_pt_gps_list, @@ -163,7 +163,7 @@ int target_emulate_report_target_port_groups(struct se_task *task) buf[2] = ((rd_len >> 8) & 0xff); buf[3] = (rd_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -194,7 +194,7 @@ int target_emulate_set_target_port_groups(struct se_task *task) cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * Determine if explict ALUA via SET_TARGET_PORT_GROUPS is allowed @@ -351,7 +351,7 @@ int target_emulate_set_target_port_groups(struct se_task *task) } out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); return 0; diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 2f2235edefff..07a3025d0622 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -83,7 +83,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); if (dev == tpg->tpg_virt_lun0.lun_se_dev) { buf[0] = 0x3f; /* Not connected */ @@ -134,7 +134,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) buf[4] = 31; /* Set additional length to 31 */ out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -716,7 +716,7 @@ int target_emulate_inquiry(struct se_task *task) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = dev->transport->get_device_type(dev); @@ -733,7 +733,7 @@ int target_emulate_inquiry(struct se_task *task) ret = -EINVAL; out_unmap: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); out: if (!ret) { task->task_scsi_status = GOOD; @@ -755,7 +755,7 @@ int target_emulate_readcapacity(struct se_task *task) else blocks = (u32)blocks_long; - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = (blocks >> 24) & 0xff; buf[1] = (blocks >> 16) & 0xff; @@ -771,7 +771,7 @@ int target_emulate_readcapacity(struct se_task *task) if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) put_unaligned_be32(0xFFFFFFFF, &buf[0]); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -785,7 +785,7 @@ int target_emulate_readcapacity_16(struct se_task *task) unsigned char *buf; unsigned long long blocks = dev->transport->get_blocks(dev); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = (blocks >> 56) & 0xff; buf[1] = (blocks >> 48) & 0xff; @@ -806,7 +806,7 @@ int target_emulate_readcapacity_16(struct se_task *task) if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) buf[14] = 0x80; - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -1019,9 +1019,9 @@ int target_emulate_modesense(struct se_task *task) offset = cmd->data_length; } - rbuf = transport_kmap_first_data_page(cmd); + rbuf = transport_kmap_data_sg(cmd); memcpy(rbuf, buf, offset); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -1043,7 +1043,7 @@ int target_emulate_request_sense(struct se_task *task) return -ENOSYS; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { /* @@ -1089,7 +1089,7 @@ int target_emulate_request_sense(struct se_task *task) } end: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); return 0; @@ -1123,7 +1123,7 @@ int target_emulate_unmap(struct se_task *task) dl = get_unaligned_be16(&cdb[0]); bd_dl = get_unaligned_be16(&cdb[2]); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); ptr = &buf[offset]; pr_debug("UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu" @@ -1147,7 +1147,7 @@ int target_emulate_unmap(struct se_task *task) } err: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); if (!ret) { task->task_scsi_status = GOOD; transport_complete_task(task, 1); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index de5f4fea7f62..edbcabbf85f7 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -657,7 +657,7 @@ int target_report_luns(struct se_task *se_task) unsigned char *buf; u32 cdb_offset = 0, lun_count = 0, offset = 8, i; - buf = transport_kmap_first_data_page(se_cmd); + buf = (unsigned char *) transport_kmap_data_sg(se_cmd); /* * If no struct se_session pointer is present, this struct se_cmd is @@ -695,7 +695,7 @@ int target_report_luns(struct se_task *se_task) * See SPC3 r07, page 159. */ done: - transport_kunmap_first_data_page(se_cmd); + transport_kunmap_data_sg(se_cmd); lun_count *= 8; buf[0] = ((lun_count >> 24) & 0xff); buf[1] = ((lun_count >> 16) & 0xff); diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 68c71cd7a88e..b7c779389eea 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1535,7 +1535,7 @@ static int core_scsi3_decode_spec_i_port( tidh_new->dest_local_nexus = 1; list_add_tail(&tidh_new->dest_list, &tid_dest_list); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * For a PERSISTENT RESERVE OUT specify initiator ports payload, * first extract TransportID Parameter Data Length, and make sure @@ -1786,7 +1786,7 @@ static int core_scsi3_decode_spec_i_port( } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); /* * Go ahead and create a registrations from tid_dest_list for the @@ -1834,7 +1834,7 @@ static int core_scsi3_decode_spec_i_port( return 0; out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); /* * For the failure case, release everything from tid_dest_list * including *dest_pr_reg and the configfs dependances.. @@ -3411,14 +3411,14 @@ static int core_scsi3_emulate_pro_register_and_move( * will be moved to for the TransportID containing SCSI initiator WWN * information. */ - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); rtpi = (buf[18] & 0xff) << 8; rtpi |= buf[19] & 0xff; tid_len = (buf[20] & 0xff) << 24; tid_len |= (buf[21] & 0xff) << 16; tid_len |= (buf[22] & 0xff) << 8; tid_len |= buf[23] & 0xff; - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; if ((tid_len + 24) != cmd->data_length) { @@ -3470,7 +3470,7 @@ static int core_scsi3_emulate_pro_register_and_move( return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); proto_ident = (buf[24] & 0x0f); #if 0 pr_debug("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:" @@ -3504,7 +3504,7 @@ static int core_scsi3_emulate_pro_register_and_move( goto out; } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; pr_debug("SPC-3 PR [%s] Extracted initiator %s identifier: %s" @@ -3769,13 +3769,13 @@ after_iport_check: " REGISTER_AND_MOVE\n"); } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); core_scsi3_put_pr_reg(dest_pr_reg); return 0; out: if (buf) - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); if (dest_se_deve) core_scsi3_lunacl_undepend_item(dest_se_deve); if (dest_node_acl) @@ -3849,7 +3849,7 @@ int target_scsi3_emulate_pr_out(struct se_task *task) scope = (cdb[2] & 0xf0); type = (cdb[2] & 0x0f); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * From PERSISTENT_RESERVE_OUT parameter list (payload) */ @@ -3867,7 +3867,7 @@ int target_scsi3_emulate_pr_out(struct se_task *task) aptpl = (buf[17] & 0x01); unreg = (buf[17] & 0x02); } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; /* @@ -3967,7 +3967,7 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff); @@ -4001,7 +4001,7 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4027,7 +4027,7 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff); @@ -4086,7 +4086,7 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) err: spin_unlock(&se_dev->dev_reservation_lock); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4110,7 +4110,7 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((add_len << 8) & 0xff); buf[1] = (add_len & 0xff); @@ -4142,7 +4142,7 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */ buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4172,7 +4172,7 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); @@ -4293,7 +4293,7 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index d35467d42e12..8d4def30e9e8 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -693,7 +693,7 @@ static int pscsi_transport_complete(struct se_task *task) if (task->task_se_cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) { - unsigned char *buf = transport_kmap_first_data_page(task->task_se_cmd); + unsigned char *buf = transport_kmap_data_sg(task->task_se_cmd); if (cdb[0] == MODE_SENSE_10) { if (!(buf[3] & 0x80)) @@ -703,7 +703,7 @@ static int pscsi_transport_complete(struct se_task *task) buf[2] |= 0x80; } - transport_kunmap_first_data_page(task->task_se_cmd); + transport_kunmap_data_sg(task->task_se_cmd); } } after_mode_sense: diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index e186f7db3860..cf996d81cfcb 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3084,11 +3084,6 @@ static int transport_generic_cmd_sequencer( (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB))) goto out_unsupported_cdb; - /* Let's limit control cdbs to a page, for simplicity's sake. */ - if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) && - size > PAGE_SIZE) - goto out_invalid_cdb_field; - transport_set_supported_SAM_opcode(cmd); return ret; @@ -3492,9 +3487,11 @@ int transport_generic_map_mem_to_cmd( } EXPORT_SYMBOL(transport_generic_map_mem_to_cmd); -void *transport_kmap_first_data_page(struct se_cmd *cmd) +void *transport_kmap_data_sg(struct se_cmd *cmd) { struct scatterlist *sg = cmd->t_data_sg; + struct page **pages; + int i; BUG_ON(!sg); /* @@ -3502,15 +3499,41 @@ void *transport_kmap_first_data_page(struct se_cmd *cmd) * tcm_loop who may be using a contig buffer from the SCSI midlayer for * control CDBs passed as SGLs via transport_generic_map_mem_to_cmd() */ - return kmap(sg_page(sg)) + sg->offset; + if (!cmd->t_data_nents) + return NULL; + else if (cmd->t_data_nents == 1) + return kmap(sg_page(sg)) + sg->offset; + + /* >1 page. use vmap */ + pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL); + if (!pages) + return NULL; + + /* convert sg[] to pages[] */ + for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) { + pages[i] = sg_page(sg); + } + + cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL); + kfree(pages); + if (!cmd->t_data_vmap) + return NULL; + + return cmd->t_data_vmap + cmd->t_data_sg[0].offset; } -EXPORT_SYMBOL(transport_kmap_first_data_page); +EXPORT_SYMBOL(transport_kmap_data_sg); -void transport_kunmap_first_data_page(struct se_cmd *cmd) +void transport_kunmap_data_sg(struct se_cmd *cmd) { - kunmap(sg_page(cmd->t_data_sg)); + if (!cmd->t_data_nents) + return; + else if (cmd->t_data_nents == 1) + kunmap(sg_page(cmd->t_data_sg)); + + vunmap(cmd->t_data_vmap); + cmd->t_data_vmap = NULL; } -EXPORT_SYMBOL(transport_kunmap_first_data_page); +EXPORT_SYMBOL(transport_kunmap_data_sg); static int transport_generic_get_mem(struct se_cmd *cmd) diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h index 4866499bdeeb..e5e6ff98f0fa 100644 --- a/include/target/target_core_backend.h +++ b/include/target/target_core_backend.h @@ -59,7 +59,7 @@ int transport_set_vpd_ident_type(struct t10_vpd *, unsigned char *); int transport_set_vpd_ident(struct t10_vpd *, unsigned char *); /* core helpers also used by command snooping in pscsi */ -void *transport_kmap_first_data_page(struct se_cmd *); -void transport_kunmap_first_data_page(struct se_cmd *); +void *transport_kmap_data_sg(struct se_cmd *); +void transport_kunmap_data_sg(struct se_cmd *); #endif /* TARGET_CORE_BACKEND_H */ diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index daf532bc721a..dc4e345a0163 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -582,6 +582,7 @@ struct se_cmd { struct scatterlist *t_data_sg; unsigned int t_data_nents; + void *t_data_vmap; struct scatterlist *t_bidi_data_sg; unsigned int t_bidi_data_nents; -- cgit v1.2.3-55-g7522 From 2f9bc894c67dbacae5a6a9875818d2a18a918d18 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 23:33:48 -0800 Subject: iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT This patch addresses a bug with sendtargets discovery where INADDR_ANY (0.0.0.0) + IN6ADDR_ANY_INIT ([0:0:0:0:0:0:0:0]) network portals where incorrectly being reported back to initiators instead of the address of the connecting interface. To address this, save local socket ->getname() output during iscsi login setup, and makes iscsit_build_sendtargets_response() return these TargetAddress keys when INADDR_ANY or IN6ADDR_ANY_INIT portals are in use. Reported-by: Dax Kelson Reported-by: Andy Grover Cc: David S. Miller Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 37 +++++++++++++++++++++++++++---- drivers/target/iscsi/iscsi_target_core.h | 2 ++ drivers/target/iscsi/iscsi_target_login.c | 31 ++++++++++++++++++++++---- 3 files changed, 62 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 6e070e0a8393..44262908def5 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3164,6 +3164,30 @@ static int iscsit_send_task_mgt_rsp( return 0; } +static bool iscsit_check_inaddr_any(struct iscsi_np *np) +{ + bool ret = false; + + if (np->np_sockaddr.ss_family == AF_INET6) { + const struct sockaddr_in6 sin6 = { + .sin6_addr = IN6ADDR_ANY_INIT }; + struct sockaddr_in6 *sock_in6 = + (struct sockaddr_in6 *)&np->np_sockaddr; + + if (!memcmp(sock_in6->sin6_addr.s6_addr, + sin6.sin6_addr.s6_addr, 16)) + ret = true; + } else { + struct sockaddr_in * sock_in = + (struct sockaddr_in *)&np->np_sockaddr; + + if (sock_in->sin_addr.s_addr == INADDR_ANY) + ret = true; + } + + return ret; +} + static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd) { char *payload = NULL; @@ -3213,12 +3237,17 @@ static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd) spin_lock(&tpg->tpg_np_lock); list_for_each_entry(tpg_np, &tpg->tpg_gnp_list, tpg_np_list) { + struct iscsi_np *np = tpg_np->tpg_np; + bool inaddr_any = iscsit_check_inaddr_any(np); + len = sprintf(buf, "TargetAddress=" "%s%s%s:%hu,%hu", - (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ? - "[" : "", tpg_np->tpg_np->np_ip, - (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ? - "]" : "", tpg_np->tpg_np->np_port, + (np->np_sockaddr.ss_family == AF_INET6) ? + "[" : "", (inaddr_any == false) ? + np->np_ip : conn->local_ip, + (np->np_sockaddr.ss_family == AF_INET6) ? + "]" : "", (inaddr_any == false) ? + np->np_port : conn->local_port, tpg->tpgt); len += 1; diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index ebf81fdbb5c5..0ec3b77a0c27 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -508,6 +508,7 @@ struct iscsi_conn { u16 cid; /* Remote TCP Port */ u16 login_port; + u16 local_port; int net_size; u32 auth_id; #define CONNFLAG_SCTP_STRUCT_FILE 0x01 @@ -527,6 +528,7 @@ struct iscsi_conn { unsigned char bad_hdr[ISCSI_HDR_LEN]; #define IPV6_ADDRESS_SPACE 48 unsigned char login_ip[IPV6_ADDRESS_SPACE]; + unsigned char local_ip[IPV6_ADDRESS_SPACE]; int conn_usage_count; int conn_waiting_on_uc; atomic_t check_immediate_queue; diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 373b0cc6abd8..ec47a7c5966e 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -615,8 +615,8 @@ static int iscsi_post_login_handler( } pr_debug("iSCSI Login successful on CID: %hu from %s to" - " %s:%hu,%hu\n", conn->cid, conn->login_ip, np->np_ip, - np->np_port, tpg->tpgt); + " %s:%hu,%hu\n", conn->cid, conn->login_ip, + conn->local_ip, conn->local_port, tpg->tpgt); list_add_tail(&conn->conn_list, &sess->sess_conn_list); atomic_inc(&sess->nconn); @@ -658,7 +658,8 @@ static int iscsi_post_login_handler( sess->session_state = TARG_SESS_STATE_LOGGED_IN; pr_debug("iSCSI Login successful on CID: %hu from %s to %s:%hu,%hu\n", - conn->cid, conn->login_ip, np->np_ip, np->np_port, tpg->tpgt); + conn->cid, conn->login_ip, conn->local_ip, conn->local_port, + tpg->tpgt); spin_lock_bh(&sess->conn_lock); list_add_tail(&conn->conn_list, &sess->sess_conn_list); @@ -1020,6 +1021,18 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c", &sock_in6.sin6_addr.in6_u); conn->login_port = ntohs(sock_in6.sin6_port); + + if (conn->sock->ops->getname(conn->sock, + (struct sockaddr *)&sock_in6, &err, 0) < 0) { + pr_err("sock_ops->getname() failed.\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_TARGET_ERROR); + goto new_sess_out; + } + snprintf(conn->local_ip, sizeof(conn->local_ip), "%pI6c", + &sock_in6.sin6_addr.in6_u); + conn->local_port = ntohs(sock_in6.sin6_port); + } else { memset(&sock_in, 0, sizeof(struct sockaddr_in)); @@ -1032,6 +1045,16 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) } sprintf(conn->login_ip, "%pI4", &sock_in.sin_addr.s_addr); conn->login_port = ntohs(sock_in.sin_port); + + if (conn->sock->ops->getname(conn->sock, + (struct sockaddr *)&sock_in, &err, 0) < 0) { + pr_err("sock_ops->getname() failed.\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_TARGET_ERROR); + goto new_sess_out; + } + sprintf(conn->local_ip, "%pI4", &sock_in.sin_addr.s_addr); + conn->local_port = ntohs(sock_in.sin_port); } conn->network_transport = np->np_network_transport; @@ -1039,7 +1062,7 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) pr_debug("Received iSCSI login request from %s on %s Network" " Portal %s:%hu\n", conn->login_ip, (conn->network_transport == ISCSI_TCP) ? "TCP" : "SCTP", - np->np_ip, np->np_port); + conn->local_ip, conn->local_port); pr_debug("Moving to TARG_CONN_STATE_IN_LOGIN.\n"); conn->conn_state = TARG_CONN_STATE_IN_LOGIN; -- cgit v1.2.3-55-g7522 From bb1acb2ee038a6c13ee99e0b9fb44dacb4a9de84 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 17 Jan 2012 18:00:56 -0800 Subject: target: Return correct ASC for unimplemented VPD pages My draft of SPC-4 says: If the device server does not implement the requested vital product data page, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 07a3025d0622..370ad13930a4 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -729,7 +729,7 @@ int target_emulate_inquiry(struct se_task *task) } pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); - cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; ret = -EINVAL; out_unmap: -- cgit v1.2.3-55-g7522 From bf0053550aebe56f3bb5dd793e9de69238b5b945 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 17 Jan 2012 18:00:57 -0800 Subject: target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0 My draft of SPC-4 says: If the PAGE CODE field is not set to zero when the EVPD bit is set to zero, the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 370ad13930a4..a9bbf5a5cc27 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -698,6 +698,13 @@ int target_emulate_inquiry(struct se_task *task) int p, ret; if (!(cdb[1] & 0x1)) { + if (cdb[2]) { + pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n", + cdb[2]); + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } + ret = target_emulate_inquiry_std(cmd); goto out; } -- cgit v1.2.3-55-g7522 From 6c5aa407d52e9e40c2e31a3dfa5cb19a9672bf36 Mon Sep 17 00:00:00 2001 From: Cousson, Benoit Date: Fri, 20 Jan 2012 16:55:04 +0100 Subject: i2c: OMAP: Fix OMAP1 build error CONFIG_OF is not defined for OMAP1 yet and thus the omap1_defconfig build generate an error for 3.3-rc1. drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe': drivers/i2c/busses/i2c-omap.c:1021:26: error: 'omap_i2c_of_match' undeclared (first use in this function) drivers/i2c/busses/i2c-omap.c:1021:26: note: each undeclared identifier is reported only once for each function it appears in Wrap omap_i2c_of_match with of_match_ptr() to prevent compilation error in case of OMAP1 build. Signed-off-by: Benoit Cousson Cc: Ben Dooks Signed-off-by: Tony Lindgren --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f713eac55047..801df6000e9b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1018,7 +1018,7 @@ omap_i2c_probe(struct platform_device *pdev) goto err_release_region; } - match = of_match_device(omap_i2c_of_match, &pdev->dev); + match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); if (match) { u32 freq = 100000; /* default to 100000 Hz */ -- cgit v1.2.3-55-g7522 From 95120d5d1bc17bdec29085186b6ab3d90e92d6f3 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 22 Jan 2012 18:57:57 +0100 Subject: Correct bad gpio naming One of the GPIO names in drivers/gpio/gpio-lpc32xx.c was bad. Renaming gpi000 -> gpio00 Signed-off-by: Roland Stigge Signed-off-by: Grant Likely --- drivers/gpio/gpio-lpc32xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 5b6948081f8f..ddfacc5ce56d 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -96,7 +96,7 @@ static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = { }; static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = { - "gpi000", "gpio01", "gpio02", "gpio03", + "gpio00", "gpio01", "gpio02", "gpio03", "gpio04", "gpio05" }; -- cgit v1.2.3-55-g7522 From af1be04901e27ce669b4ecde1c953d5c939498f5 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 18 Jan 2012 14:03:11 +0100 Subject: iommu/amd: Work around broken IVRS tables On some systems the IVRS table does not contain all PCI devices present in the system. In case a device not present in the IVRS table is translated by the IOMMU no DMA is possible from that device by default. This patch fixes this by removing the DTE entry for every PCI device present in the system and not covered by IVRS. Cc: stable@vger.kernel.org # >= 3.0 Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index cce1f03b8895..f75e0608be5b 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -2863,6 +2863,9 @@ static unsigned device_dma_ops_init(void) for_each_pci_dev(pdev) { if (!check_device(&pdev->dev)) { + + iommu_ignore_device(&pdev->dev); + unhandled += 1; continue; } -- cgit v1.2.3-55-g7522 From d07a74a546981a09ba490936645fbf0d1340b96c Mon Sep 17 00:00:00 2001 From: Dr. David Alan Gilbert Date: Thu, 25 Aug 2011 16:13:55 -0700 Subject: dmaengine: fix missing 'cnt' in ?: in dmatest Hi, On the latest tree my compiler has started giving the warning: drivers/dma/dmatest.c:575:28: warning: the omitted middle operand in ?: will always be ?true?, suggest explicit middle operand [-Wparentheses] The following patch fixes the missing middle clause with the same fix that Nicolas Ferre used in the similar clauses. (There seems to have been a race between him fixing that and the extra clause going in a little later). I don't actually know the dmatest code/structures, nor do I own any hardware to test it on (assuming it needs a DMA engine); but this patch builds, the existing code is almost certainly wrong and the fix is the same as the corresponding lines above it. (WTH is x=y?:z legal C anyway?) Signed-off-by: Dr. David Alan Gilbert Reported-by: Dan Carpenter Reported-by: Paul Gortmaker Acked-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 2b8661b54eaf..24225f0fdcd8 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -599,7 +599,7 @@ static int dmatest_add_channel(struct dma_chan *chan) } if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) { cnt = dmatest_add_threads(dtc, DMA_PQ); - thread_count += cnt > 0 ?: 0; + thread_count += cnt > 0 ? cnt : 0; } pr_info("dmatest: Started %u threads using %s\n", -- cgit v1.2.3-55-g7522 From ecd9d34a674b671f09f55b3365d852f75a1f598b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 22 Jan 2012 23:24:15 -0500 Subject: c2port: fix build error for duramar2150 due to missing header. This file needs the basic headers for resource management, otherwise we will see this build error: CC [M] drivers/misc/c2port/c2port-duramar2150.o drivers/misc/c2port/c2port-duramar2150.c: In function ‘duramar2150_c2port_init’: drivers/misc/c2port/c2port-duramar2150.c:125:2: error: implicit declaration of function ‘request_region’ [-Werror=implicit-function-declaration] drivers/misc/c2port/c2port-duramar2150.c:139:2: error: implicit declaration of function ‘release_region’ [-Werror=implicit-function-declaration] Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman --- drivers/misc/c2port/c2port-duramar2150.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c index 778fc3fdfb9b..5484301d57d9 100644 --- a/drivers/misc/c2port/c2port-duramar2150.c +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #define DATA_PORT 0x325 -- cgit v1.2.3-55-g7522 From 7c5763b8453a94871d356f20df30f350f8631e8b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jan 2012 02:11:25 -0200 Subject: drivers: misc: Remove MISC_DEVICES config option MISC_DEVICES option alone does not select any kernel code and can cause dependency build warnings, such as: warning: (KS8851 && AX88796_93CX6 && RTL8180 && RTL8187 && ADM8211 && RT2400PCI && RT2500PCI && RT61PCI && RT2800PCI && R8187SE) selects EEPROM_93CX6 which has unmet direct dependencies (MISC_DEVICES) As the current drivers/misc/Kconfig stands, it is only possible to select the drivers below if MISC_DEVICES option is selected: source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" So remove MISC_DEVICES option so that nothing is dependant on it. Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 17 +++-------------- drivers/mmc/host/Kconfig | 1 - drivers/net/ethernet/micrel/Kconfig | 1 - 3 files changed, 3 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 6a1a092db146..c7795096d43b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -2,24 +2,14 @@ # Misc strange devices # -# This one has to live outside of the MISC_DEVICES conditional, -# because it may be selected by drivers/platform/x86/hp_accel. +menu "Misc devices" + config SENSORS_LIS3LV02D tristate depends on INPUT select INPUT_POLLDEV default n -menuconfig MISC_DEVICES - bool "Misc devices" - ---help--- - Say Y here to get to see options for device drivers from various - different categories. This option alone does not add any kernel code. - - If you say N, all options in this submenu will be skipped and disabled. - -if MISC_DEVICES - config AD525X_DPOT tristate "Analog Devices Digital Potentiometers" depends on (I2C || SPI) && SYSFS @@ -516,5 +506,4 @@ source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" - -endif # MISC_DEVICES +endmenu diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index cf444b0ca2cc..00fcbed1afd2 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -477,7 +477,6 @@ config MMC_SDHI config MMC_CB710 tristate "ENE CB710 MMC/SD Interface support" depends on PCI - select MISC_DEVICES select CB710_CORE help This option enables support for MMC/SD part of ENE CB710/720 Flash diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig index 1ea811cf515b..fe42fc00d8d3 100644 --- a/drivers/net/ethernet/micrel/Kconfig +++ b/drivers/net/ethernet/micrel/Kconfig @@ -42,7 +42,6 @@ config KS8851 select NET_CORE select MII select CRC32 - select MISC_DEVICES select EEPROM_93CX6 ---help--- SPI driver for Micrel KS8851 SPI attached network chip. -- cgit v1.2.3-55-g7522 From 0eaf9f52e94f756147dbfe1faf1f77a02378dbf9 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 13:23:08 +0200 Subject: OMAPDSS: use sync versions of pm_runtime_put omapdss doesn't work properly on system suspend. The problem seems to be the fact that omapdss uses pm_runtime_put() functions when turning off the hardware, and when system suspend is in process only sync versions are allowed. Using non-sync versions normally and sync versions when suspending would need rather ugly hacks to convey the information of suspending/not-suspending to different functions. Optimally the driver wouldn't even need to care about this, and the PM layer would handle syncing when suspend is in process. This patch changes all omapdss's pm_runtime_put calls to pm_runtime_put_sync. This fixes the suspend problem, and probably the performance penalty of always using sync versions is negligible. Signed-off-by: Tomi Valkeinen Acked-by: Kevin Hilman --- drivers/video/omap2/dss/dispc.c | 2 +- drivers/video/omap2/dss/dsi.c | 2 +- drivers/video/omap2/dss/dss.c | 2 +- drivers/video/omap2/dss/hdmi.c | 2 +- drivers/video/omap2/dss/rfbi.c | 2 +- drivers/video/omap2/dss/venc.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index a5ec7f37c185..e1626a1d5c45 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -401,7 +401,7 @@ void dispc_runtime_put(void) DSSDBG("dispc_runtime_put\n"); - r = pm_runtime_put(&dispc.pdev->dev); + r = pm_runtime_put_sync(&dispc.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 511ae2a7add8..04a89a7bbaf5 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -1079,7 +1079,7 @@ void dsi_runtime_put(struct platform_device *dsidev) DSSDBG("dsi_runtime_put\n"); - r = pm_runtime_put(&dsi->pdev->dev); + r = pm_runtime_put_sync(&dsi->pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 17033457ee89..77c2b5a32b5d 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -720,7 +720,7 @@ void dss_runtime_put(void) DSSDBG("dss_runtime_put\n"); - r = pm_runtime_put(&dss.pdev->dev); + r = pm_runtime_put_sync(&dss.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index b4c270edb915..c39f9c3a92cf 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -176,7 +176,7 @@ static void hdmi_runtime_put(void) DSSDBG("hdmi_runtime_put\n"); - r = pm_runtime_put(&hdmi.pdev->dev); + r = pm_runtime_put_sync(&hdmi.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index 814bb9500dca..55f398014f33 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -140,7 +140,7 @@ static void rfbi_runtime_put(void) DSSDBG("rfbi_runtime_put\n"); - r = pm_runtime_put(&rfbi.pdev->dev); + r = pm_runtime_put_sync(&rfbi.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c index b3e9f9091581..5c3d0f901510 100644 --- a/drivers/video/omap2/dss/venc.c +++ b/drivers/video/omap2/dss/venc.c @@ -401,7 +401,7 @@ static void venc_runtime_put(void) DSSDBG("venc_runtime_put\n"); - r = pm_runtime_put(&venc.pdev->dev); + r = pm_runtime_put_sync(&venc.pdev->dev); WARN_ON(r < 0); } -- cgit v1.2.3-55-g7522 From c49d005b6cc8491fad5b24f82805be2d6bcbd3dd Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:09:57 +0200 Subject: OMAPDSS: HDMI: PHY burnout fix A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-4430sdp.c | 5 +++ arch/arm/mach-omap2/board-omap4panda.c | 5 +++ drivers/video/omap2/dss/hdmi.c | 3 ++ drivers/video/omap2/dss/ti_hdmi.h | 4 ++ drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 68 +++++++++++++++++++++++++++++-- include/video/omapdss.h | 5 +++ 6 files changed, 86 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index cd6ec517a929..0ce758edaad2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -732,6 +732,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -739,6 +743,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e1b196361f95..370c4b428888 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -502,6 +502,10 @@ static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -509,6 +513,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index c39f9c3a92cf..d7aa3b056529 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -497,6 +497,7 @@ bool omapdss_hdmi_detect(void) int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) { + struct omap_dss_hdmi_data *priv = dssdev->data; int r = 0; DSSDBG("ENTER hdmi_display_enable\n"); @@ -509,6 +510,8 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) goto err0; } + hdmi.ip_data.hpd_gpio = priv->hpd_gpio; + r = omap_dss_start_device(dssdev); if (r) { DSSERR("failed to start device\n"); diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h index 7503f7f619a7..50dadba5070a 100644 --- a/drivers/video/omap2/dss/ti_hdmi.h +++ b/drivers/video/omap2/dss/ti_hdmi.h @@ -126,6 +126,10 @@ struct hdmi_ip_data { const struct ti_hdmi_ip_ops *ops; struct hdmi_config cfg; struct hdmi_pll_info pll_data; + + /* ti_hdmi_4xxx_ip private data. These should be in a separate struct */ + int hpd_gpio; + bool phy_tx_enabled; }; int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data); void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data); diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 9af81f18f163..2d72334ca3da 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "ti_hdmi_4xxx_ip.h" #include "dss.h" @@ -223,6 +224,49 @@ void ti_hdmi_4xxx_pll_disable(struct hdmi_ip_data *ip_data) hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF); } +static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data) +{ + unsigned long flags; + bool hpd; + int r; + /* this should be in ti_hdmi_4xxx_ip private data */ + static DEFINE_SPINLOCK(phy_tx_lock); + + spin_lock_irqsave(&phy_tx_lock, flags); + + hpd = gpio_get_value(ip_data->hpd_gpio); + + if (hpd == ip_data->phy_tx_enabled) { + spin_unlock_irqrestore(&phy_tx_lock, flags); + return 0; + } + + if (hpd) + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); + else + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_LDOON); + + if (r) { + DSSERR("Failed to %s PHY TX power\n", + hpd ? "enable" : "disable"); + goto err; + } + + ip_data->phy_tx_enabled = hpd; +err: + spin_unlock_irqrestore(&phy_tx_lock, flags); + return r; +} + +static irqreturn_t hpd_irq_handler(int irq, void *data) +{ + struct hdmi_ip_data *ip_data = data; + + hdmi_check_hpd_state(ip_data); + + return IRQ_HANDLED; +} + int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) { u16 r = 0; @@ -232,10 +276,6 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) if (r) return r; - r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); - if (r) - return r; - /* * Read address 0 in order to get the SCP reset done completed * Dummy access performed to make sure reset is done @@ -257,12 +297,32 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) /* Write to phy address 3 to change the polarity control */ REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27); + r = request_threaded_irq(gpio_to_irq(ip_data->hpd_gpio), + NULL, hpd_irq_handler, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "hpd", ip_data); + if (r) { + DSSERR("HPD IRQ request failed\n"); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + + r = hdmi_check_hpd_state(ip_data); + if (r) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + return 0; } void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + ip_data->phy_tx_enabled = false; } static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data) diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 062b3b24ff10..483f67caa7ad 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -590,6 +590,11 @@ struct omap_dss_device { int (*get_backlight)(struct omap_dss_device *dssdev); }; +struct omap_dss_hdmi_data +{ + int hpd_gpio; +}; + struct omap_dss_driver { struct device_driver driver; -- cgit v1.2.3-55-g7522 From d1bb399ad03c11e792f6dea198d3b1e23061f094 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 26 Jan 2012 22:05:58 +0100 Subject: firewire: ohci: add reset packet quirk for SB Audigy The Audigy's SB1394 controller is actually from Texas Instruments and has the same bus reset packet generation bug, so it needs the same quirk entry. Signed-off-by: Clemens Ladisch Cc: 2.6.36+ Signed-off-by: Stefan Richter --- drivers/firewire/ohci.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 6628feaa7622..21250eca28d1 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -263,6 +263,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card) static char ohci_driver_name[] = KBUILD_MODNAME; #define PCI_DEVICE_ID_AGERE_FW643 0x5901 +#define PCI_DEVICE_ID_CREATIVE_SB1394 0x4001 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380 #define PCI_DEVICE_ID_TI_TSB12LV22 0x8009 #define PCI_DEVICE_ID_TI_TSB12LV26 0x8020 @@ -289,6 +290,9 @@ static const struct { {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6, QUIRK_NO_MSI}, + {PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID, + QUIRK_RESET_PACKET}, + {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID, QUIRK_NO_MSI}, -- cgit v1.2.3-55-g7522 From e47e321a35c741ee41b67976f8c6a3a7a42bc5c0 Mon Sep 17 00:00:00 2001 From: Bernd Schubert Date: Fri, 20 Jan 2012 18:43:54 +0000 Subject: RDMA/core: Fix kernel panic by always initializing qp->usecnt We have just been investigating kernel panics related to cq->ibcq.event_handler() completion calls. The problem is that ib_destroy_qp() fails with -EBUSY. Further investigation revealed qp->usecnt is not initialized. This counter was introduced in linux-3.2 by commit 0e0ec7e0638e ("RDMA/core: Export ib_open_qp() to share XRC TGT QPs") but it only gets initialized for IB_QPT_XRC_TGT, but it is checked in ib_destroy_qp() for any QP type. Fix this by initializing qp->usecnt for every QP we create. Signed-off-by: Bernd Schubert Signed-off-by: Sven Breuner [ Initialize qp->usecnt in uverbs too. - Sean ] Signed-off-by: Sean Hefty Cc: Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_cmd.c | 1 + drivers/infiniband/core/verbs.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index b930da4c0c63..4d27e4c3fe34 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -1485,6 +1485,7 @@ ssize_t ib_uverbs_create_qp(struct ib_uverbs_file *file, qp->event_handler = attr.event_handler; qp->qp_context = attr.qp_context; qp->qp_type = attr.qp_type; + atomic_set(&qp->usecnt, 0); atomic_inc(&pd->usecnt); atomic_inc(&attr.send_cq->usecnt); if (attr.recv_cq) diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 602b1bd723a9..575b78045aaf 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -421,6 +421,7 @@ struct ib_qp *ib_create_qp(struct ib_pd *pd, qp->uobject = NULL; qp->qp_type = qp_init_attr->qp_type; + atomic_set(&qp->usecnt, 0); if (qp_init_attr->qp_type == IB_QPT_XRC_TGT) { qp->event_handler = __ib_shared_qp_event_handler; qp->qp_context = qp; @@ -430,7 +431,6 @@ struct ib_qp *ib_create_qp(struct ib_pd *pd, qp->xrcd = qp_init_attr->xrcd; atomic_inc(&qp_init_attr->xrcd->usecnt); INIT_LIST_HEAD(&qp->open_list); - atomic_set(&qp->usecnt, 0); real_qp = qp; qp = __ib_open_qp(real_qp, qp_init_attr->event_handler, -- cgit v1.2.3-55-g7522 From ef5352875a12a0a45be8bca29fc218a94786d920 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 Jan 2012 09:15:29 +0300 Subject: IB/ipath: Calling PTR_ERR() on right variable in create_file() "dentry" is a valid pointer. "*dentry" was intended. Signed-off-by: Dan Carpenter Acked-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index b7d4216db3c3..a4de9d58e9b4 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -89,7 +89,7 @@ static int create_file(const char *name, umode_t mode, error = ipathfs_mknod(parent->d_inode, *dentry, mode, fops, data); else - error = PTR_ERR(dentry); + error = PTR_ERR(*dentry); mutex_unlock(&parent->d_inode->i_mutex); return error; -- cgit v1.2.3-55-g7522 From 81f99dcc93226c7accfe5c4edad1749b8aebf7db Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Tue, 17 Jan 2012 10:17:30 -0600 Subject: RDMA/nes: Fix for sending MPA reject frame Set a reject flag, when sending MPA reject message to inform the peer that the application has rejected the connection. Signed-off-by: Tatyana Nikolova Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_cm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 425065b36b8c..183f7ab120db 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -233,6 +233,7 @@ static int send_mpa_reject(struct nes_cm_node *cm_node) u8 *start_ptr = &start_addr; u8 **start_buff = &start_ptr; u16 buff_len = 0; + struct ietf_mpa_v1 *mpa_frame; skb = dev_alloc_skb(MAX_CM_BUFFER); if (!skb) { @@ -242,6 +243,8 @@ static int send_mpa_reject(struct nes_cm_node *cm_node) /* send an MPA reject frame */ cm_build_mpa_frame(cm_node, start_buff, &buff_len, NULL, MPA_KEY_REPLY); + mpa_frame = (struct ietf_mpa_v1 *)*start_buff; + mpa_frame->flags |= IETF_MPA_FLAGS_REJECT; form_cm_frame(skb, cm_node, NULL, 0, *start_buff, buff_len, SET_ACK | SET_FIN); cm_node->state = NES_CM_STATE_FIN_WAIT1; -- cgit v1.2.3-55-g7522 From 7525c85be0e6d18596390e7e2b17a206cd9777f6 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 27 Jan 2012 09:54:30 -0800 Subject: RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh() Make sure all exit paths from this function unlock everything. Reported-by: Bart Van Assche Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_cm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 183f7ab120db..271279cccad8 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1363,8 +1363,7 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi if (!memcmp(nesadapter->arp_table[arpindex].mac_addr, neigh->ha, ETH_ALEN)) { /* Mac address same as in nes_arp_table */ - ip_rt_put(rt); - return rc; + goto out; } nes_manage_arp_cache(nesvnic->netdev, @@ -1380,6 +1379,8 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi neigh_event_send(neigh, NULL); } } + +out: rcu_read_unlock(); ip_rt_put(rt); return rc; -- cgit v1.2.3-55-g7522 From 0f3696eb21ef39b7bb7ea7d0160e925904309281 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jan 2012 10:40:47 +0100 Subject: IB/qib: Use GFP_ATOMIC when locks are held alloc_dummy_hdrq() is called with locks held and thus should not use GFP_KERNEL. The semantic patch that makes this report is available in scripts/coccinelle/locks/call_kern.cocci. Signed-off-by: Julia Lawall Acked-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/qib/qib_iba6120.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c index 4f18e2d332df..d0c64d514813 100644 --- a/drivers/infiniband/hw/qib/qib_iba6120.c +++ b/drivers/infiniband/hw/qib/qib_iba6120.c @@ -2105,7 +2105,7 @@ static void alloc_dummy_hdrq(struct qib_devdata *dd) dd->cspec->dummy_hdrq = dma_alloc_coherent(&dd->pcidev->dev, dd->rcd[0]->rcvhdrq_size, &dd->cspec->dummy_hdrq_phys, - GFP_KERNEL | __GFP_COMP); + GFP_ATOMIC | __GFP_COMP); if (!dd->cspec->dummy_hdrq) { qib_devinfo(dd->pcidev, "Couldn't allocate dummy hdrq\n"); /* fallback to just 0'ing */ -- cgit v1.2.3-55-g7522 From b6bfefb0410dc49853bccd9673ead896d317c082 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Thu, 12 Jan 2012 21:29:59 -0500 Subject: IB/qib: Roll back PCIe tuning change Commit 8d4548f2b ("IB/qib: Default some module parameters optimally") introduced an issue with older root complexes. They cannot handle the pcie_caps of 0x51 (MaxReadReq 4096, MaxPayload=256). A typical diagnostic in this situation reported by syslog contains the text: [PCIe Poisoned TLP][Send DMA memory read] Restore the module paramter default to zero with will avoid any changes in the root complex. Reviewed-by: Mark Debbage Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/qib/qib_pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c index f695061d688e..0fde788e1100 100644 --- a/drivers/infiniband/hw/qib/qib_pcie.c +++ b/drivers/infiniband/hw/qib/qib_pcie.c @@ -560,7 +560,7 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd) * BIOS may not set PCIe bus-utilization parameters for best performance. * Check and optionally adjust them to maximize our throughput. */ -static int qib_pcie_caps = 0x51; +static int qib_pcie_caps; module_param_named(pcie_caps, qib_pcie_caps, int, S_IRUGO); MODULE_PARM_DESC(pcie_caps, "Max PCIe tuning: Payload (0..3), ReadReq (4..7)"); -- cgit v1.2.3-55-g7522 From 9ced69ca5296567033804950d8d2161f454c5012 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Tue, 10 Jan 2012 23:53:41 +0000 Subject: RDMA/ucma: Discard all events for new connections until accepted After reporting a new connection request to user space, the rdma_ucm will discard subsequent events until the user has associated a user space idenfier with the kernel cm_id. This is needed to avoid reporting a reject/disconnect event to the user for a request that they may not have processed. The user space identifier is set once the user tries to accept the connection request. However, the following race exists in ucma_accept(): ctx->uid = cmd.uid; ret = rdma_accept(ctx->cm_id, ...); Once ctx->uid has been set, new events may be reported to the user. While the above mentioned race is avoided, there is an issue that the user _may_ receive a reject/disconnect event if rdma_accept() fails, depending on when the event is processed. To simplify the use of rdma_accept(), discard all events unless rdma_accept() succeeds. This problem was discovered based on questions from Roland Dreier . Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/ucma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index b37b0c02a7b9..5034a87cc72d 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -808,9 +808,12 @@ static ssize_t ucma_accept(struct ucma_file *file, const char __user *inbuf, return PTR_ERR(ctx); if (cmd.conn_param.valid) { - ctx->uid = cmd.uid; ucma_copy_conn_param(&conn_param, &cmd.conn_param); + mutex_lock(&file->mut); ret = rdma_accept(ctx->cm_id, &conn_param); + if (!ret) + ctx->uid = cmd.uid; + mutex_unlock(&file->mut); } else ret = rdma_accept(ctx->cm_id, NULL); -- cgit v1.2.3-55-g7522 From 94f622bdac82dd0542741382ea8c9359fd9c163b Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Fri, 6 Jan 2012 18:15:01 -0600 Subject: RDMA/nes: Fix fast memory registration length Zero high order word of fast memory registration (FMR) length field. FMR length field is 32 bits, so high word should always be zero. Signed-off-by: Tatyana Nikolova Signed-off-by: Donald Wood Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 5095bc41c6cc..ba2eb002fd29 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -3427,6 +3427,8 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, set_wqe_32bit_value(wqe->wqe_words, NES_IWARP_SQ_FMR_WQE_LENGTH_LOW_IDX, ib_wr->wr.fast_reg.length); + set_wqe_32bit_value(wqe->wqe_words, + NES_IWARP_SQ_FMR_WQE_LENGTH_HIGH_IDX, 0); set_wqe_32bit_value(wqe->wqe_words, NES_IWARP_SQ_FMR_WQE_MR_STAG_IDX, ib_wr->wr.fast_reg.rkey); -- cgit v1.2.3-55-g7522 From 4a4b03f4efdcf9f4dd8ce68f305c5fb8ff8e56c4 Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Fri, 6 Jan 2012 18:17:19 -0600 Subject: RDMA/nes: Fix fast memory registration opcode Fix fast memory registration opcode in local invalidate completion. Signed-off-by: Tatyana Nikolova Signed-off-by: Donald Wood Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index ba2eb002fd29..3875365a284b 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -3726,7 +3726,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) entry->opcode = IB_WC_SEND; break; case NES_IWARP_SQ_OP_LOCINV: - entry->opcode = IB_WR_LOCAL_INV; + entry->opcode = IB_WC_LOCAL_INV; break; case NES_IWARP_SQ_OP_FAST_REG: entry->opcode = IB_WC_FAST_REG_MR; -- cgit v1.2.3-55-g7522 From d56d8b28e9247e7e35e02fbb12b12239a2c33ad1 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 8 Nov 2011 23:17:34 +0000 Subject: drm/i915:: Disable FBC on SandyBridge Enabling FBC is causing the BLT ring to run between 10-100x slower than normal and frequently lockup. The interim solution is disable FBC once more until we know why. Signed-off-by: Chris Wilson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b3b51c43dad0..19f35eceba40 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1872,7 +1872,7 @@ static void intel_update_fbc(struct drm_device *dev) if (enable_fbc < 0) { DRM_DEBUG_KMS("fbc set to per-chip default\n"); enable_fbc = 1; - if (INTEL_INFO(dev)->gen <= 5) + if (INTEL_INFO(dev)->gen <= 6) enable_fbc = 0; } if (!enable_fbc) { -- cgit v1.2.3-55-g7522 From f7f5ef0afdcca69fb02ded1763c28eca74e6b54d Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sat, 28 Jan 2012 19:35:24 +0000 Subject: drivers/video: compile fixes for fsl-diu-fb.c Fix a compiler errors introduced in: commit ddd3d905436b572ebadc09dcf2d12ca5b37020a0 Author: Timur Tabi drivers/video: fsl-diu-fb: merge all allocated data into one block Signed-off-by: Michael Neuling Acked-by: Timur Tabi Signed-off-by: Florian Tobias Schandinat --- drivers/video/fsl-diu-fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index acf292bfba02..6af3f16754f0 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -1432,7 +1432,7 @@ static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state) struct fsl_diu_data *data; data = dev_get_drvdata(&ofdev->dev); - disable_lcdc(data->fsl_diu_info[0]); + disable_lcdc(data->fsl_diu_info); return 0; } @@ -1442,7 +1442,7 @@ static int fsl_diu_resume(struct platform_device *ofdev) struct fsl_diu_data *data; data = dev_get_drvdata(&ofdev->dev); - enable_lcdc(data->fsl_diu_info[0]); + enable_lcdc(data->fsl_diu_info); return 0; } -- cgit v1.2.3-55-g7522 From 7bc1dc7174d06104fde069a3b5aef1c5b902a5c9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 27 Jan 2012 15:58:33 +0300 Subject: intelfb: remove some dead code The goto on the line before means the return is unreachable. The goto also returns -ENODEV so no changes are needed there. Signed-off-by: Dan Carpenter Signed-off-by: Florian Tobias Schandinat --- drivers/video/intelfb/intelfbdrv.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 5ba399991050..a5947c94145f 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -529,7 +529,6 @@ static int __devinit intelfb_pci_register(struct pci_dev *pdev, if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) { ERR_MSG("Could not allocate cmap for intelfb_info.\n"); goto err_out_cmap; - return -ENODEV; } dinfo = info->par; -- cgit v1.2.3-55-g7522 From 9f1065032ceb7e86c7c9f16bb86518857e88a172 Mon Sep 17 00:00:00 2001 From: Hubert Feurstein Date: Mon, 9 Jan 2012 17:23:57 +0100 Subject: atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume An error was existing in the saving of CONTRAST_CTR register across suspend/resume. Signed-off-by: Hubert Feurstein Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable Signed-off-by: Florian Tobias Schandinat --- drivers/video/atmel_lcdfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 0d7b20d4285d..e40c00f2c2ba 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -1108,7 +1108,7 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg) */ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); - sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); + sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR); lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0); if (sinfo->atmel_lcdfb_power_control) sinfo->atmel_lcdfb_power_control(0); -- cgit v1.2.3-55-g7522 From a4ea430853b71753103ec693acfc8624bd3e748e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 26 Jan 2012 17:18:47 +0100 Subject: drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT An identical patch has been merged for i9xx_crtc_mode_set: Commit 59df7b1771c150163e522f33c638096ab0efbf42 Author: Christian Schmidt Date: Mon Dec 19 20:03:33 2011 +0100 drm/intel: Fix initialization if startup happens in interlaced mode [v2] But that one neglected to fix up the ironlake+ path. This should fix the issue reported by Alfonso Fiore where booting with only a HDMI cable connected to his TV failed to display anything. The issue is that the bios set up things for 1080i and used the pannel fitter to scale up the lower progressive resolutions. We failed to clear the interlace bit in the PIPEACONF register, resulting in havoc. Cc: Peter Ross Tested-by: Alfonso Fiore Signed-Off-by: Daniel Vetter Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 19f35eceba40..f1744aada98f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5912,7 +5912,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, adjusted_mode->crtc_vsync_end -= 1; adjusted_mode->crtc_vsync_start -= 1; } else - pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */ + pipeconf &= ~PIPECONF_INTERLACE_MASK; /* progressive */ I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) | -- cgit v1.2.3-55-g7522 From 683da59d7b8ae04891636d4b59893cd4e9b0b7e5 Mon Sep 17 00:00:00 2001 From: Timo Juhani Lindfors Date: Sun, 29 Jan 2012 16:12:13 +0200 Subject: usb: gadget: zero: fix bug in loopback autoresume handling ab943a2e125b (USB: gadget: gadget zero uses new suspend/resume hooks) introduced a copy-paste error where f_loopback.c writes to a variable declared in f_sourcesink.c. This prevents one from creating gadgets that only have a loopback function. Cc: stable Signed-off-by: Timo Juhani Lindfors Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_loopback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index 6d87f288df4e..2c0cd824c667 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -418,7 +418,7 @@ int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume) /* support autoresume for remote wakeup testing */ if (autoresume) - sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; /* support OTG systems */ if (gadget_is_otg(cdev->gadget)) { -- cgit v1.2.3-55-g7522 From aa3e8b4e715d0781a4e6cd1bb7570410209f0ba8 Mon Sep 17 00:00:00 2001 From: Neil Zhang Date: Mon, 30 Jan 2012 11:44:23 +0800 Subject: usb: otg: mv_otg: Add dependence This otg driver depends on marvell EHCI driver, so add the dependence. It can fix the following build error on i386: ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Neil Zhang Signed-off-by: Felipe Balbi --- drivers/usb/otg/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 76d629345418..735ef4c2339a 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -118,7 +118,7 @@ config FSL_USB2_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_MV_UDC && USB_SUSPEND + depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help -- cgit v1.2.3-55-g7522 From 05df1f3c2afaef5672627f2b7095f0d4c4dbc3a0 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 26 Jan 2012 18:25:37 +0100 Subject: iommu/msm: Fix error handling in msm_iommu_unmap() Error handling in msm_iommu_unmap() is broken. On some error conditions retval is set to a non-zero value which causes the function to return 'len' at the end. This hides the error from the user. Zero should be returned in those error cases. Cc: David Brown Cc: Stepan Moskovchenko Cc: stable@vger.kernel.org # >= 3.1 Signed-off-by: Joerg Roedel Acked-by: David Brown --- drivers/iommu/msm_iommu.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/msm_iommu.c b/drivers/iommu/msm_iommu.c index 08a90b88e40d..cee307e86606 100644 --- a/drivers/iommu/msm_iommu.c +++ b/drivers/iommu/msm_iommu.c @@ -482,23 +482,19 @@ static size_t msm_iommu_unmap(struct iommu_domain *domain, unsigned long va, priv = domain->priv; - if (!priv) { - ret = -ENODEV; + if (!priv) goto fail; - } fl_table = priv->pgtable; if (len != SZ_16M && len != SZ_1M && len != SZ_64K && len != SZ_4K) { pr_debug("Bad length: %d\n", len); - ret = -EINVAL; goto fail; } if (!fl_table) { pr_debug("Null page table\n"); - ret = -EINVAL; goto fail; } @@ -507,7 +503,6 @@ static size_t msm_iommu_unmap(struct iommu_domain *domain, unsigned long va, if (*fl_pte == 0) { pr_debug("First level PTE is 0\n"); - ret = -ENODEV; goto fail; } -- cgit v1.2.3-55-g7522 From 1a30871fe635d3e92972e6b93e39ff65bb57e52d Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 16 Jan 2012 11:07:16 +0200 Subject: mtd: fix MTD suspend Commits 3fe4bae88460869a8e553397cd9057a4ee7ca341 and 079c985e7a6f4ce60f931cebfdd5ee3c3 broke MTD suspend in 2 ways: 1. When the '->suspend' method is not present, we return -EOPNOTSUPP, but the callers of 'mtd_suspend()' expects 0 instead. 2. Checking of the 'mtd' parameter against NULL has been incorrectly removed in 'mtd_cls_suspend()'. This patch fixes the breakages. This has been found, analyzed, reported and tested by Rafael J. Wysocki . Note, this patch is not needed in the stable tree because it causes a regression introduced during the v3.3 merge window. Reported-by: Rafael J. Wysocki Tested-by: Rafael J. Wysocki Tested-by: Russell King Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 2 +- include/linux/mtd/mtd.h | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 6ae9ca01388b..9a9ce71a71fc 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -119,7 +119,7 @@ static int mtd_cls_suspend(struct device *dev, pm_message_t state) { struct mtd_info *mtd = dev_get_drvdata(dev); - return mtd_suspend(mtd); + return mtd ? mtd_suspend(mtd) : 0; } static int mtd_cls_resume(struct device *dev) diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 1a81fde8f333..d8c7aad7331c 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -427,9 +427,7 @@ static inline int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) static inline int mtd_suspend(struct mtd_info *mtd) { - if (!mtd->suspend) - return -EOPNOTSUPP; - return mtd->suspend(mtd); + return mtd->suspend ? mtd->suspend(mtd) : 0; } static inline void mtd_resume(struct mtd_info *mtd) -- cgit v1.2.3-55-g7522 From 320cfa6ce0b3dc794fedfa4bae54c0f65077234d Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 29 Jan 2012 12:41:15 +0100 Subject: firewire: ohci: disable MSI on Ricoh controllers The PCIe device FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller [1180:e832] (prog-if 10 [OHCI]) is unable to access attached FireWire devices when MSI is enabled but works if MSI is disabled. http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html Hence add the "disable MSI" quirks flag for this device, or in fact for safety and simplicity for all current (R5U230, R5U231, R5U240) and future Ricoh PCIe 1394 controllers. Reported-by: Stefan Thomas Cc: 2.6.36+ Signed-off-by: Stefan Richter --- drivers/firewire/ohci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 21250eca28d1..7f5f0da726da 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -303,7 +303,7 @@ static const struct { QUIRK_NO_MSI}, {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID, - QUIRK_CYCLE_TIMER}, + QUIRK_CYCLE_TIMER | QUIRK_NO_MSI}, {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID, QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A}, -- cgit v1.2.3-55-g7522 From 34f8ac6d79e5446c6242e4bcb474f152c857c5c6 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Fri, 27 Jan 2012 14:53:53 -0600 Subject: Prevent DM RAID from loading bitmap twice. The life cycle of a device-mapper target is: 1) create 2) resume 3) suspend *) possibly repeat from 2 4) destroy The dm-raid target is unconditionally calling MD's bitmap_load function upon every resume. If steps 2 & 3 above are repeated, bitmap_load is called multiple times. It is only written to be called once; otherwise, it allocates new memory for the bitmap (without freeing the old) and incrementing the number of pages it thinks it has without zeroing first. This ultimately leads to access beyond allocated memory and lost memory. Simply avoiding the bitmap_load call upon resume is not sufficient. If the target was suspended while the initial recovery was only partially complete, it needs to be restarted when the target is resumed. This is why 'md_wakeup_thread' is called before issuing the 'mddev_resume'. Signed-off-by: Jonathan Brassow Signed-off-by: NeilBrown --- drivers/md/dm-raid.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index c2907d836e4e..86cb7e5d83d5 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -56,7 +56,8 @@ struct raid_dev { struct raid_set { struct dm_target *ti; - uint64_t print_flags; + uint32_t bitmap_loaded; + uint32_t print_flags; struct mddev md; struct raid_type *raid_type; @@ -1085,7 +1086,7 @@ static int raid_status(struct dm_target *ti, status_type_t type, raid_param_cnt += 2; } - raid_param_cnt += (hweight64(rs->print_flags & ~DMPF_REBUILD) * 2); + raid_param_cnt += (hweight32(rs->print_flags & ~DMPF_REBUILD) * 2); if (rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC)) raid_param_cnt--; @@ -1197,7 +1198,12 @@ static void raid_resume(struct dm_target *ti) { struct raid_set *rs = ti->private; - bitmap_load(&rs->md); + if (!rs->bitmap_loaded) { + bitmap_load(&rs->md); + rs->bitmap_loaded = 1; + } else + md_wakeup_thread(rs->md.thread); + mddev_resume(&rs->md); } -- cgit v1.2.3-55-g7522 From a6f7feae6d19e84253918d88b04153af09d3a243 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 26 Jan 2012 16:41:33 +0200 Subject: IB/mlx4: pass SMP vendor-specific attribute MADs to firmware In the current code, vendor-specific MADs (e.g with the FDR-10 attribute) are silently dropped by the driver, resulting in timeouts at the sending side and inability to query/configure the relevant feature. However, the ConnectX firmware is able to handle such MADs. For unsupported attributes, the firmware returns a GET_RESPONSE MAD containing an error status. For example, for a FDR-10 node with LID 11: # ibstat mlx4_0 1 CA: 'mlx4_0' Port 1: State: Active Physical state: LinkUp Rate: 40 (FDR10) Base lid: 11 LMC: 0 SM lid: 24 Capability mask: 0x02514868 Port GUID: 0x0002c903002e65d1 Link layer: InfiniBand Extended Port Query (EPI) vendor mad timeouts before the patch: # smpquery MEPI 11 -d ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11) smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed EPI query works OK with the patch: # smpquery MEPI 11 -d ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [6548] mad_rpc: data offs 64 sz 64 mad data 0000 0000 0000 0001 0000 0001 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 # Ext Port info: Lid 11 port 0 StateChangeEnable:...............0x00 LinkSpeedSupported:..............0x01 LinkSpeedEnabled:................0x01 LinkSpeedActive:.................0x01 Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Acked-by: Ira Weiny Cc: Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/mad.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index 95c94d8f0254..259b0670b51c 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -257,12 +257,9 @@ static int ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num, return IB_MAD_RESULT_SUCCESS; /* - * Don't process SMInfo queries or vendor-specific - * MADs -- the SMA can't handle them. + * Don't process SMInfo queries -- the SMA can't handle them. */ - if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_SM_INFO || - ((in_mad->mad_hdr.attr_id & IB_SMP_ATTR_VENDOR_MASK) == - IB_SMP_ATTR_VENDOR_MASK)) + if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_SM_INFO) return IB_MAD_RESULT_SUCCESS; } else if (in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT || in_mad->mad_hdr.mgmt_class == MLX4_IB_VENDOR_CLASS1 || -- cgit v1.2.3-55-g7522 From c5488c571f08b2e21b060a1b43aa840d0a3c6e7a Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Mon, 28 Nov 2011 14:22:29 -0600 Subject: RDMA/nes: Copyright update Update copyright information in the source files. Signed-off-by: Tatyana Nikolova Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes.c | 2 +- drivers/infiniband/hw/nes/nes.h | 2 +- drivers/infiniband/hw/nes/nes_cm.c | 2 +- drivers/infiniband/hw/nes/nes_cm.h | 2 +- drivers/infiniband/hw/nes/nes_context.h | 2 +- drivers/infiniband/hw/nes/nes_hw.c | 2 +- drivers/infiniband/hw/nes/nes_hw.h | 2 +- drivers/infiniband/hw/nes/nes_mgt.c | 2 +- drivers/infiniband/hw/nes/nes_mgt.h | 2 +- drivers/infiniband/hw/nes/nes_nic.c | 2 +- drivers/infiniband/hw/nes/nes_user.h | 2 +- drivers/infiniband/hw/nes/nes_utils.c | 2 +- drivers/infiniband/hw/nes/nes_verbs.c | 2 +- drivers/infiniband/hw/nes/nes_verbs.h | 2 +- 14 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 7013da5e9eda..7140199f562e 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. * * This software is available to you under a choice of one of two diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h index 568b4f11380a..c438e4691b3c 100644 --- a/drivers/infiniband/hw/nes/nes.h +++ b/drivers/infiniband/hw/nes/nes.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. * * This software is available to you under a choice of one of two diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 271279cccad8..a4972abedef1 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h index bdfa1fbb35fc..4646e6666087 100644 --- a/drivers/infiniband/hw/nes/nes_cm.h +++ b/drivers/infiniband/hw/nes/nes_cm.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_context.h b/drivers/infiniband/hw/nes/nes_context.h index b4393a16099d..a69eef16d72d 100644 --- a/drivers/infiniband/hw/nes/nes_context.h +++ b/drivers/infiniband/hw/nes/nes_context.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 055f4b545df0..d42c9f435b1b 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 0b590e152c6a..d748e4b31b8d 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -1,5 +1,5 @@ /* -* Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. +* Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_mgt.c b/drivers/infiniband/hw/nes/nes_mgt.c index b3b2a240c6e9..3ba7be369452 100644 --- a/drivers/infiniband/hw/nes/nes_mgt.c +++ b/drivers/infiniband/hw/nes/nes_mgt.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel-NE, Inc. All rights reserved. + * Copyright (c) 2006 - 2011 Intel-NE, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_mgt.h b/drivers/infiniband/hw/nes/nes_mgt.h index 8c8af254555a..4f7f701c4a81 100644 --- a/drivers/infiniband/hw/nes/nes_mgt.h +++ b/drivers/infiniband/hw/nes/nes_mgt.h @@ -1,5 +1,5 @@ /* -* Copyright (c) 2010 Intel-NE, Inc. All rights reserved. +* Copyright (c) 2006 - 2011 Intel-NE, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index 4b3fa711a247..f3a3ecf8d09e 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_user.h b/drivers/infiniband/hw/nes/nes_user.h index 71e133ab209b..4926de744488 100644 --- a/drivers/infiniband/hw/nes/nes_user.h +++ b/drivers/infiniband/hw/nes/nes_user.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c index 8b4c2ff54888..e98f4fc0b768 100644 --- a/drivers/infiniband/hw/nes/nes_utils.c +++ b/drivers/infiniband/hw/nes/nes_utils.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 3875365a284b..0927b5cc65d3 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h index fe6b6e92fa90..0eff7c44d76b 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.h +++ b/drivers/infiniband/hw/nes/nes_verbs.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved. * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. * * This software is available to you under a choice of one of two -- cgit v1.2.3-55-g7522 From bda3a47c886664e86ee14eb79e9072b9e341f575 Mon Sep 17 00:00:00 2001 From: Nikolaus Voss Date: Tue, 17 Jan 2012 10:28:33 +0100 Subject: at_hdmac: bugfix for enabling channel irq commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant chan_id and chancnt initialization in dma drivers as this is done in dma_async_device_register(). However, atc_enable_irq() relied on chan_id set before registering the device, what left only channel 0 functional for this driver. This patch introduces atc_enable/disable_chan_irq() as a variant of atc_enable/disable_irq() with the channel as explicit argument. Signed-off-by: Nikolaus Voss Signed-off-by: Nicolas Ferre Cc: stable Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 4 ++-- drivers/dma/at_hdmac_regs.h | 17 ++++++++--------- 2 files changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 97f87b29b9f3..f4aed5fc2cb6 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1343,7 +1343,7 @@ static int __init at_dma_probe(struct platform_device *pdev) tasklet_init(&atchan->tasklet, atc_tasklet, (unsigned long)atchan); - atc_enable_irq(atchan); + atc_enable_chan_irq(atdma, i); } /* set base routines */ @@ -1410,7 +1410,7 @@ static int __exit at_dma_remove(struct platform_device *pdev) struct at_dma_chan *atchan = to_at_dma_chan(chan); /* Disable interrupts */ - atc_disable_irq(atchan); + atc_disable_chan_irq(atdma, chan->chan_id); tasklet_disable(&atchan->tasklet); tasklet_kill(&atchan->tasklet); diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index dcaedfc181cf..a8d3277d60b5 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -327,28 +327,27 @@ static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli) } -static void atc_setup_irq(struct at_dma_chan *atchan, int on) +static void atc_setup_irq(struct at_dma *atdma, int chan_id, int on) { - struct at_dma *atdma = to_at_dma(atchan->chan_common.device); - u32 ebci; + u32 ebci; /* enable interrupts on buffer transfer completion & error */ - ebci = AT_DMA_BTC(atchan->chan_common.chan_id) - | AT_DMA_ERR(atchan->chan_common.chan_id); + ebci = AT_DMA_BTC(chan_id) + | AT_DMA_ERR(chan_id); if (on) dma_writel(atdma, EBCIER, ebci); else dma_writel(atdma, EBCIDR, ebci); } -static inline void atc_enable_irq(struct at_dma_chan *atchan) +static void atc_enable_chan_irq(struct at_dma *atdma, int chan_id) { - atc_setup_irq(atchan, 1); + atc_setup_irq(atdma, chan_id, 1); } -static inline void atc_disable_irq(struct at_dma_chan *atchan) +static void atc_disable_chan_irq(struct at_dma *atdma, int chan_id) { - atc_setup_irq(atchan, 0); + atc_setup_irq(atdma, chan_id, 0); } -- cgit v1.2.3-55-g7522 From 7df898b1a70b13c3a8892625f4ead929d9554293 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 31 Jan 2012 09:16:59 +1000 Subject: drm/nouveau/disp: check that panel power gpio is enabled at init time Reported-by: Yuriy Khomchik Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.h | 5 +++-- drivers/gpu/drm/nouveau/nouveau_display.c | 10 ++++++++++ 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h index 1e382ad5a2b8..a37c31e358aa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.h +++ b/drivers/gpu/drm/nouveau/nouveau_bios.h @@ -54,9 +54,10 @@ struct bit_entry { int bit_table(struct drm_device *, u8 id, struct bit_entry *); enum dcb_gpio_tag { - DCB_GPIO_TVDAC0 = 0xc, + DCB_GPIO_PANEL_POWER = 0x01, + DCB_GPIO_TVDAC0 = 0x0c, DCB_GPIO_TVDAC1 = 0x2d, - DCB_GPIO_PWM_FAN = 0x9, + DCB_GPIO_PWM_FAN = 0x09, DCB_GPIO_FAN_SENSE = 0x3d, DCB_GPIO_UNUSED = 0xff }; diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 3cb52bc52b21..795a9e3c990a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -219,6 +219,16 @@ nouveau_display_init(struct drm_device *dev) if (ret) return ret; + /* power on internal panel if it's not already. the init tables of + * some vbios default this to off for some reason, causing the + * panel to not work after resume + */ + if (nouveau_gpio_func_get(dev, DCB_GPIO_PANEL_POWER) == 0) { + nouveau_gpio_func_set(dev, DCB_GPIO_PANEL_POWER, true); + msleep(300); + } + + /* enable polling for external displays */ drm_kms_helper_poll_enable(dev); /* enable hotplug interrupts */ -- cgit v1.2.3-55-g7522 From ce2e7895faba8fabaa917f52293126e5f4174fa9 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 1 Feb 2012 15:08:59 +1000 Subject: drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS There's at least one known case where our shadowing code is buggy, and we fail init. Until we can be confident we're doing all this correctly, lets succeed and risk crazy bios tables rather than failing for perfectly valid configs too. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_mxm.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_mxm.c b/drivers/gpu/drm/nouveau/nouveau_mxm.c index 8bccddf4eff0..e5a64f0f4cb7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mxm.c +++ b/drivers/gpu/drm/nouveau/nouveau_mxm.c @@ -656,7 +656,16 @@ nouveau_mxm_init(struct drm_device *dev) if (mxm_shadow(dev, mxm[0])) { MXM_MSG(dev, "failed to locate valid SIS\n"); +#if 0 + /* we should, perhaps, fall back to some kind of limited + * mode here if the x86 vbios hasn't already done the + * work for us (so we prevent loading with completely + * whacked vbios tables). + */ return -EINVAL; +#else + return 0; +#endif } MXM_MSG(dev, "MXMS Version %d.%d\n", -- cgit v1.2.3-55-g7522 From 1eb8a619b43c1e99179ebadbc9c614ed37358f2d Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Sat, 7 Jan 2012 16:48:52 +1000 Subject: drm/nouveau: fix typo on mxmdcb option Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index e4a7cfe7898d..81d7962e7252 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -124,7 +124,7 @@ MODULE_PARM_DESC(ctxfw, "Use external HUB/GPC ucode (fermi)\n"); int nouveau_ctxfw; module_param_named(ctxfw, nouveau_ctxfw, int, 0400); -MODULE_PARM_DESC(ctxfw, "Santise DCB table according to MXM-SIS\n"); +MODULE_PARM_DESC(mxmdcb, "Santise DCB table according to MXM-SIS\n"); int nouveau_mxmdcb = 1; module_param_named(mxmdcb, nouveau_mxmdcb, int, 0400); -- cgit v1.2.3-55-g7522 From 525895ba388c949aa906f26e3ec5cb1ab041f56b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 10 Jan 2012 10:18:28 +1000 Subject: drm/nouveau/gem: fix fence_sync race / oops Due to a race it was possible for a fence to be destroyed while another thread was trying to synchronise with it. If this happened in the fallback non-semaphore path, it lead to the following oops due to fence->channel being NULL. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] nouveau_fence_update+0xe/0xe0 [nouveau] *pde = a649c067 SMP Modules linked in: fuse nouveau(O) ttm(O) drm_kms_helper(O) drm(O) mxm_wmi video wmi netconsole configfs lockd bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_codec_realtek snd_hda_intel snd_hda_cobinfmt_misc uinput ata_generic pata_acpi pata_aet2c_algo_bit i2c_core [last unloaded: wmi] Pid: 2255, comm: gnome-shell Tainted: G O 3.2.0-0.rc5.git0.1.fc17.i686 #1 System manufacturer System Product Name/M2A-VM EIP: 0060:[] EFLAGS: 00010296 CPU: 1 EIP is at nouveau_fence_update+0xe/0xe0 [nouveau] EAX: 00000000 EBX: ddfc6dd0 ECX: dd111580 EDX: 00000000 ESI: 00003e80 EDI: dd111580 EBP: dd121d00 ESP: dd121ce8 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process gnome-shell (pid: 2255, ti=dd120000 task=dd111580 task.ti=dd120000) Stack: 7dc86c76 00000000 00003e80 ddfc6dd0 00003e80 dd111580 dd121d0c fa96371f 00000000 dd121d3c fa963773 dd111580 01000246 000ec53d 00000000 ddfc6dd0 00001f40 00000000 ddfc6dd0 00000010 dc7df840 dd121d6c fa9639a0 00000000 Call Trace: [] __nouveau_fence_signalled+0x1f/0x30 [nouveau] [] __nouveau_fence_wait+0x43/0xd0 [nouveau] [] nouveau_fence_sync+0x1a0/0x1c0 [nouveau] [] validate_list+0x176/0x300 [nouveau] [] ? ttm_bo_mem_put+0x30/0x30 [ttm] [] nouveau_gem_ioctl_pushbuf+0x48a/0xfd0 [nouveau] [] ? die+0x31/0x80 [] drm_ioctl+0x388/0x490 [drm] [] ? die+0x31/0x80 [] ? nouveau_gem_ioctl_new+0x150/0x150 [nouveau] [] ? file_has_perm+0xcb/0xe0 [] ? drm_copy_field+0x80/0x80 [drm] [] do_vfs_ioctl+0x86/0x5b0 [] ? die+0x31/0x80 [] ? selinux_file_ioctl+0x62/0x130 [] ? fget_light+0x30/0x340 [] sys_ioctl+0x6f/0x80 [] syscall_call+0x7/0xb [] ? die+0x31/0x80 [] ? die+0x31/0x80 Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nouveau_gem.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 5f0bc57fdaab..7ce3fde40743 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -379,6 +379,25 @@ retry: return 0; } +static int +validate_sync(struct nouveau_channel *chan, struct nouveau_bo *nvbo) +{ + struct nouveau_fence *fence = NULL; + int ret = 0; + + spin_lock(&nvbo->bo.bdev->fence_lock); + if (nvbo->bo.sync_obj) + fence = nouveau_fence_ref(nvbo->bo.sync_obj); + spin_unlock(&nvbo->bo.bdev->fence_lock); + + if (fence) { + ret = nouveau_fence_sync(fence, chan); + nouveau_fence_unref(&fence); + } + + return ret; +} + static int validate_list(struct nouveau_channel *chan, struct list_head *list, struct drm_nouveau_gem_pushbuf_bo *pbbo, uint64_t user_pbbo_ptr) @@ -393,7 +412,7 @@ validate_list(struct nouveau_channel *chan, struct list_head *list, list_for_each_entry(nvbo, list, entry) { struct drm_nouveau_gem_pushbuf_bo *b = &pbbo[nvbo->pbbo_index]; - ret = nouveau_fence_sync(nvbo->bo.sync_obj, chan); + ret = validate_sync(chan, nvbo); if (unlikely(ret)) { NV_ERROR(dev, "fail pre-validate sync\n"); return ret; @@ -416,7 +435,7 @@ validate_list(struct nouveau_channel *chan, struct list_head *list, return ret; } - ret = nouveau_fence_sync(nvbo->bo.sync_obj, chan); + ret = validate_sync(chan, nvbo); if (unlikely(ret)) { NV_ERROR(dev, "fail post-validate sync\n"); return ret; -- cgit v1.2.3-55-g7522 From a9d993882008a1ae2c953064f0c2ca7e604b1333 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Jan 2012 10:20:47 +0300 Subject: drm/nv50/pm: signedness bug in nv50_pm_clocks_pre() calc_mclk() returns zero on success and negative on failure but clk is a u32. v2: Martin Peres: - clk should be an int, not a u32 Signed-off-by: Martin Peres Signed-off-by: Dan Carpenter Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv50_pm.c b/drivers/gpu/drm/nouveau/nv50_pm.c index 03937212e9d8..ec5481dfcd82 100644 --- a/drivers/gpu/drm/nouveau/nv50_pm.c +++ b/drivers/gpu/drm/nouveau/nv50_pm.c @@ -495,9 +495,9 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv50_pm_state *info; struct pll_lims pll; - int ret = -EINVAL; + int clk, ret = -EINVAL; int N, M, P1, P2; - u32 clk, out; + u32 out; if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac) -- cgit v1.2.3-55-g7522 From 86698c20f71d488b32c49ed4687fb3cf8a88a5ca Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Tue, 31 Jan 2012 19:06:25 -0600 Subject: drm/radeon/kms: disable output polling when suspended Polling the outputs when the device is suspended can result in erroneous status updates. Disable output polling during suspend to prevent this from happening. Signed-off-by: Seth Forshee Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index cec51a5b69dd..49f7cb7e226b 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -883,6 +883,8 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state) if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) return 0; + drm_kms_helper_poll_disable(dev); + /* turn off display hw */ list_for_each_entry(connector, &dev->mode_config.connector_list, head) { drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF); @@ -972,6 +974,8 @@ int radeon_resume_kms(struct drm_device *dev) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON); } + + drm_kms_helper_poll_enable(dev); return 0; } -- cgit v1.2.3-55-g7522 From 1b61925061660009f5b8047f93c5297e04541273 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Wed, 1 Feb 2012 12:09:55 +0100 Subject: drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height. The value of this register is transferred to the V_COUNTER register at the beginning of vertical blank. V_COUNTER is the reference for VLINE waits and goes from VIEWPORT_Y_START to VIEWPORT_Y_START+VIEWPORT_HEIGHT during scanout, so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the beginning of vertical blank, and VLINE waits excluding the whole scanout area could never finish (possibly only if VIEWPORT_Y_START is larger than the length of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer height should prevent this for any kind of VLINE wait. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=45329 . CC: stable@vger.kernel.org Signed-off-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 891935271d34..742f17f009a9 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1184,7 +1184,7 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, WREG32(EVERGREEN_GRPH_ENABLE + radeon_crtc->crtc_offset, 1); WREG32(EVERGREEN_DESKTOP_HEIGHT + radeon_crtc->crtc_offset, - crtc->mode.vdisplay); + target_fb->height); x &= ~3; y &= ~1; WREG32(EVERGREEN_VIEWPORT_START + radeon_crtc->crtc_offset, @@ -1353,7 +1353,7 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, WREG32(AVIVO_D1GRPH_ENABLE + radeon_crtc->crtc_offset, 1); WREG32(AVIVO_D1MODE_DESKTOP_HEIGHT + radeon_crtc->crtc_offset, - crtc->mode.vdisplay); + target_fb->height); x &= ~3; y &= ~1; WREG32(AVIVO_D1MODE_VIEWPORT_START + radeon_crtc->crtc_offset, -- cgit v1.2.3-55-g7522 From 3f7e363249ad5f4070025f6c09fd264f93f24eab Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 31 Jan 2012 09:55:21 +0100 Subject: drm/radeon/kms: Fix device tree linkage of DP i2c buses too Properly set the parent device of DP i2c buses before registering them too. Signed-off-by: Jean Delvare Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_i2c.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c index e2a393ff0c44..98a8ad680109 100644 --- a/drivers/gpu/drm/radeon/radeon_i2c.c +++ b/drivers/gpu/drm/radeon/radeon_i2c.c @@ -958,6 +958,7 @@ struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev, i2c->rec = *rec; i2c->adapter.owner = THIS_MODULE; i2c->adapter.class = I2C_CLASS_DDC; + i2c->adapter.dev.parent = &dev->pdev->dev; i2c->dev = dev; snprintf(i2c->adapter.name, sizeof(i2c->adapter.name), "Radeon aux bus %s", name); -- cgit v1.2.3-55-g7522 From e9c8d7a03e69093e4c33c5056a45c1233a42e8a4 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 18 Jan 2012 10:14:25 +0100 Subject: dma: sh_dma: not all SH DMAC implementations support MEMCPY Add a flag to allow platforms to specify, whether a DMAC instance supports the MEMCPY operation. To avoid regressions, preserve the current default. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Vinod Koul --- drivers/dma/shdma.c | 3 ++- include/linux/sh_dma.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 54043cd831c8..812fd76e9c18 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -1262,7 +1262,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev) INIT_LIST_HEAD(&shdev->common.channels); - dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask); + if (!pdata->slave_only) + dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask); if (pdata->slave && pdata->slave_num) dma_cap_set(DMA_SLAVE, shdev->common.cap_mask); diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 8cd7fe59cf1a..425450b980b8 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -70,6 +70,7 @@ struct sh_dmae_pdata { unsigned int needs_tend_set:1; unsigned int no_dmars:1; unsigned int chclr_present:1; + unsigned int slave_only:1; }; /* DMA register */ -- cgit v1.2.3-55-g7522 From 42f578741bc59dc871bef03ff0f72dd197388409 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Wed, 1 Feb 2012 09:12:23 -0800 Subject: Input: evdev - fix variable initialisation Commit 509f87c5f564 (evdev - do not block waiting for an event if fd is nonblock) created a code path were it was possible to use retval uninitialized. This could lead to the xorg evdev input driver getting corrupt data and refusing to work with log messages like AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success (for drivers auo-pixcir-ts and gpio-keys). Signed-off-by: Heiko Stuebner Acked-by: Dima Zavin Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 76457d50bc34..afc166fcc3d9 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -386,7 +386,7 @@ static ssize_t evdev_read(struct file *file, char __user *buffer, struct evdev_client *client = file->private_data; struct evdev *evdev = client->evdev; struct input_event event; - int retval; + int retval = 0; if (count < input_event_size()) return -EINVAL; -- cgit v1.2.3-55-g7522 From 4936f97cbb99c19680ea6a3cc0148ebe51f0eb68 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Wed, 1 Feb 2012 09:12:23 -0800 Subject: Input: twl4030_keypad - fix comment (trivial) And trivial whitespace fixes. Signed-off-by: Felipe Contreras Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/twl4030_keypad.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index a588578037eb..67bec14e8b96 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -34,7 +34,6 @@ #include #include - /* * The TWL4030 family chips include a keypad controller that supports * up to an 8x8 switch matrix. The controller can issue system wakeup @@ -302,7 +301,7 @@ static int __devinit twl4030_kp_program(struct twl4030_keypad *kp) if (twl4030_kpwrite_u8(kp, i, KEYP_DEB) < 0) return -EIO; - /* Set timeout period to 100 ms */ + /* Set timeout period to 200 ms */ i = KEYP_PERIOD_US(200000, PTV_PRESCALER); if (twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L) < 0) return -EIO; @@ -466,4 +465,3 @@ MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("TWL4030 Keypad Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:twl4030_keypad"); - -- cgit v1.2.3-55-g7522 From 7a0a27d2ce38aee19a31fee8c12095f586eed393 Mon Sep 17 00:00:00 2001 From: Che-Liang Chiou Date: Wed, 1 Feb 2012 09:25:35 -0800 Subject: Input: serio_raw - return proper result when serio_raw_read fails serio_raw_read now returns (sometimes partially) successful number of bytes transferred to the caller, and only returns error code to the caller on completely failed transfers. Signed-off-by: Che-Liang Chiou Signed-off-by: Dmitry Torokhov --- drivers/input/serio/serio_raw.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index 8250299fd64f..4494233d331a 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -164,7 +164,8 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer, struct serio_raw_client *client = file->private_data; struct serio_raw *serio_raw = client->serio_raw; char uninitialized_var(c); - ssize_t retval = 0; + ssize_t read = 0; + int retval; if (serio_raw->dead) return -ENODEV; @@ -180,13 +181,15 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer, if (serio_raw->dead) return -ENODEV; - while (retval < count && serio_raw_fetch_byte(serio_raw, &c)) { - if (put_user(c, buffer++)) - return -EFAULT; - retval++; + while (read < count && serio_raw_fetch_byte(serio_raw, &c)) { + if (put_user(c, buffer++)) { + retval = -EFAULT; + break; + } + read++; } - return retval; + return read ?: retval; } static ssize_t serio_raw_write(struct file *file, const char __user *buffer, -- cgit v1.2.3-55-g7522 From 2db4d87070e87d198ab630e66a898b45eff316d9 Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Wed, 1 Feb 2012 16:07:17 -0500 Subject: USB: qcserial: add several new serial devices Signed-off-by: Thomas Tuttle Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 1d5deee3be52..26e3e3063c28 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -36,6 +36,11 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */ {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa010)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa011)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa012)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa013)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa014)}, /* Novatel Gobi QDL device */ {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */ {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ @@ -86,7 +91,16 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */ {USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ + + {USB_DEVICE(0x05c6, 0x920c)}, /* Gobi 3000 QDL */ + {USB_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */ + {USB_DEVICE(0x1410, 0xa020)}, /* Novatel Gobi 3000 QDL */ + {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ + {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ + {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ {USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ + {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ + {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v1.2.3-55-g7522 From 0a365706f2d6062d3756806447c1bbcd7e315ffa Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Wed, 1 Feb 2012 16:07:45 -0500 Subject: USB: qcserial: don't enable autosuspend We've found that qcserial devices will not always wake up reliably from autosuspend, so disable it. Signed-off-by: Thomas Tuttle Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 26e3e3063c28..f98800f2324c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -137,8 +137,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) spin_lock_init(&data->susp_lock); - usb_enable_autosuspend(serial->dev); - switch (nintf) { case 1: /* QDL mode */ -- cgit v1.2.3-55-g7522 From 876cf5e7b9e4bae014b0fa2cc18b21bce6d99073 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 1 Feb 2012 18:32:32 +0530 Subject: gpio: samsung: adapt to changes in gpio specifier translator function declaration Commit 15c9a0acc3f7 (of: create of_phandle_args to simplify return of phandle parsing data) modifies the parameter list of of_xlate function pointer declaration in gpio_chip. Adapt the gpio specifier translate function for this change. Reported-by: Tushar Behera Signed-off-by: Thomas Abraham Tested-by: Karol Lewandowski Signed-off-by: Grant Likely --- drivers/gpio/gpio-samsung.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index a7661773c052..0a79a1167a25 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -2387,27 +2387,30 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { }; #if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) -static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np, - const void *gpio_spec, u32 *flags) +static int exynos4_gpio_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) { - const __be32 *gpio = gpio_spec; - const u32 n = be32_to_cpup(gpio); - unsigned int pin = gc->base + be32_to_cpu(gpio[0]); + unsigned int pin; if (WARN_ON(gc->of_gpio_n_cells < 4)) return -EINVAL; - if (n > gc->ngpio) + if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) return -EINVAL; - if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1])))) + if (gpiospec->args[0] > gc->ngpio) + return -EINVAL; + + pin = gc->base + gpiospec->args[0]; + + if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1]))) pr_warn("gpio_xlate: failed to set pin function\n"); - if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2]))) + if (s3c_gpio_setpull(pin, gpiospec->args[2])) pr_warn("gpio_xlate: failed to set pin pull up/down\n"); - if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3]))) + if (s5p_gpio_set_drvstr(pin, gpiospec->args[3])) pr_warn("gpio_xlate: failed to set pin drive strength\n"); - return n; + return gpiospec->args[0]; } static const struct of_device_id exynos4_gpio_dt_match[] __initdata = { -- cgit v1.2.3-55-g7522 From 1608ea5f4b5d6262cd6e808839491cfb2a67405a Mon Sep 17 00:00:00 2001 From: Rui li Date: Tue, 31 Jan 2012 15:27:33 +0800 Subject: USB: add new zte 3g-dongle's pid to option.c As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by: Rui li Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 129 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 128 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ea126a4490cd..39ed1f46cec0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -855,6 +855,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0088, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0089, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0090, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0091, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0092, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0093, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0098, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0099, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) }, @@ -883,7 +895,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0154, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) }, @@ -892,6 +903,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, @@ -1066,6 +1083,116 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1403, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1404, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1405, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1406, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1407, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1408, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1409, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1410, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1411, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1412, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1413, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1414, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1415, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1416, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1417, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1418, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1419, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1420, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1421, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1422, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1423, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1427, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1429, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1430, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1431, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1432, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1433, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1434, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1435, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1436, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1437, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1438, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1439, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1440, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1441, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1442, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1443, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1444, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1445, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1446, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1447, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1448, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1449, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1450, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1451, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1452, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1453, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1454, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1455, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1456, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1457, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1458, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1459, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1460, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1461, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1462, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1463, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1464, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1465, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1466, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1467, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1468, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1469, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1470, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1471, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1472, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1473, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1474, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1475, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1476, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1477, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1478, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1479, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1480, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1482, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1483, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1484, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1486, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1487, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1488, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1489, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1490, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1491, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1492, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1493, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1494, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1495, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1496, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1497, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1498, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1499, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1500, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1501, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1502, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1503, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1504, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1505, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1506, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1507, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1508, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1509, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1510, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, -- cgit v1.2.3-55-g7522 From da46d7dd530c5af7cff049145f0c088f5e75bdc6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 Feb 2012 19:04:02 -0800 Subject: staging: fix go7007-usb license Add MODULE_LICENSE() as per the license in the comment at the top of the file for this source module to fix build warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/media/go7007/go7007-usb.o see include/linux/module.h for more information Signed-off-by: Randy Dunlap Cc: Ross Cohen Signed-off-by: Linus Torvalds --- drivers/staging/media/go7007/go7007-usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c index 70e006b50f29..5443e25086e9 100644 --- a/drivers/staging/media/go7007/go7007-usb.c +++ b/drivers/staging/media/go7007/go7007-usb.c @@ -1279,3 +1279,4 @@ static struct usb_driver go7007_usb_driver = { }; module_usb_driver(go7007_usb_driver); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-55-g7522 From d166370ad86b33b1111af3a0cdd7de94e03789a6 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 1 Feb 2012 10:51:53 +0800 Subject: gpio: Add missing spin_lock_init in gpio-pch driver This bug was introduced by commit d568a681 "gpio-pch: add spinlock in suspend/resume processing" which adds a spinlock to struct pch_gpio but never init the spinlock. Reported-by: Tomoya MORINAGA Signed-off-by: Axel Lin Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/gpio/gpio-pch.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c index 68fa55e86eb1..e8729cc2ba2b 100644 --- a/drivers/gpio/gpio-pch.c +++ b/drivers/gpio/gpio-pch.c @@ -392,6 +392,7 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev, chip->reg = chip->base; pci_set_drvdata(pdev, chip); mutex_init(&chip->lock); + spin_lock_init(&chip->spinlock); pch_gpio_setup(chip); ret = gpiochip_add(&chip->gpio); if (ret) { -- cgit v1.2.3-55-g7522 From 7e3a70fb7bccada029c188c89bfbf3c0a63c1500 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 1 Feb 2012 10:50:05 +0800 Subject: gpio: Add missing spin_lock_init in gpio-ml-ioh driver This bug was introduced by commit 54be5663 "gpio-ml-ioh: Support interrupt function" which adds a spinlock to struct ioh_gpio but never init the spinlock. Signed-off-by: Axel Lin Signed-off-by: Grant Likely --- drivers/gpio/gpio-ml-ioh.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c index 03d6dd5dcb77..f0febe5b8221 100644 --- a/drivers/gpio/gpio-ml-ioh.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -448,6 +448,7 @@ static int __devinit ioh_gpio_probe(struct pci_dev *pdev, chip->reg = chip->base; chip->ch = i; mutex_init(&chip->lock); + spin_lock_init(&chip->spinlock); ioh_gpio_setup(chip, num_ports[i]); ret = gpiochip_add(&chip->gpio); if (ret) { -- cgit v1.2.3-55-g7522 From 94ac27a54be6a14948f0a9b3f542b4ff1faac232 Mon Sep 17 00:00:00 2001 From: Philippe Rétornaz Date: Tue, 24 Jan 2012 14:22:01 +0100 Subject: i.MX SDMA: Fix burstsize settings Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed the mxcmmc driver but forgot to fix the SDMA driver to handle the correct burtsize. This make the SD card access works again with DMA on i.MX31 boards. Signed-off-by: Philippe Rétornaz Tested-by: Sascha Hauer Acked-by: Sascha Hauer Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index a8af379680c1..8bc5acf36ee5 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1102,11 +1102,13 @@ static int sdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, case DMA_SLAVE_CONFIG: if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) { sdmac->per_address = dmaengine_cfg->src_addr; - sdmac->watermark_level = dmaengine_cfg->src_maxburst; + sdmac->watermark_level = dmaengine_cfg->src_maxburst * + dmaengine_cfg->src_addr_width; sdmac->word_size = dmaengine_cfg->src_addr_width; } else { sdmac->per_address = dmaengine_cfg->dst_addr; - sdmac->watermark_level = dmaengine_cfg->dst_maxburst; + sdmac->watermark_level = dmaengine_cfg->dst_maxburst * + dmaengine_cfg->dst_addr_width; sdmac->word_size = dmaengine_cfg->dst_addr_width; } sdmac->direction = dmaengine_cfg->direction; -- cgit v1.2.3-55-g7522 From ba18311dff7933ccb9c41bbbb1ad3d70840069b5 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Thu, 12 Jan 2012 17:42:22 +0800 Subject: HID: usbhid: fix dead lock between open and disconect There is no reason to hold hiddev->existancelock before calling usb_deregister_dev, so move it out of the lock. The patch fixes the lockdep warning below. [ 5733.386271] ====================================================== [ 5733.386274] [ INFO: possible circular locking dependency detected ] [ 5733.386278] 3.2.0-custom-next-20120111+ #1 Not tainted [ 5733.386281] ------------------------------------------------------- [ 5733.386284] khubd/186 is trying to acquire lock: [ 5733.386288] (minor_rwsem){++++.+}, at: [] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386311] [ 5733.386312] but task is already holding lock: [ 5733.386315] (&hiddev->existancelock){+.+...}, at: [] hiddev_disconnect+0x26/0x87 [usbhid] [ 5733.386328] [ 5733.386329] which lock already depends on the new lock. [ 5733.386330] [ 5733.386333] [ 5733.386334] the existing dependency chain (in reverse order) is: [ 5733.386336] [ 5733.386337] -> #1 (&hiddev->existancelock){+.+...}: [ 5733.386346] [] lock_acquire+0xcb/0x10e [ 5733.386357] [] __mutex_lock_common+0x60/0x465 [ 5733.386366] [] mutex_lock_nested+0x36/0x3b [ 5733.386371] [] hiddev_open+0x113/0x193 [usbhid] [ 5733.386378] [] usb_open+0x66/0xc2 [usbcore] [ 5733.386390] [] chrdev_open+0x12b/0x154 [ 5733.386402] [] __dentry_open.isra.16+0x20b/0x355 [ 5733.386408] [] nameidata_to_filp+0x43/0x4a [ 5733.386413] [] do_last+0x536/0x570 [ 5733.386419] [] path_openat+0xce/0x301 [ 5733.386423] [] do_filp_open+0x33/0x81 [ 5733.386427] [] do_sys_open+0x6a/0xfc [ 5733.386431] [] sys_open+0x1c/0x1e [ 5733.386434] [] system_call_fastpath+0x16/0x1b [ 5733.386441] [ 5733.386441] -> #0 (minor_rwsem){++++.+}: [ 5733.386448] [] __lock_acquire+0xa80/0xd74 [ 5733.386454] [] lock_acquire+0xcb/0x10e [ 5733.386458] [] down_write+0x44/0x77 [ 5733.386464] [] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386475] [] hiddev_disconnect+0x3c/0x87 [usbhid] [ 5733.386483] [] hid_disconnect+0x3f/0x54 [ 5733.386491] [] hid_device_remove+0x4e/0x7a [ 5733.386496] [] __device_release_driver+0x81/0xcd [ 5733.386502] [] device_release_driver+0x20/0x2d [ 5733.386507] [] bus_remove_device+0x114/0x128 [ 5733.386512] [] device_del+0x131/0x183 [ 5733.386519] [] hid_destroy_device+0x1e/0x3d [ 5733.386525] [] usbhid_disconnect+0x36/0x42 [usbhid] [ 5733.386530] [] usb_unbind_interface+0x57/0x11f [usbcore] [ 5733.386542] [] __device_release_driver+0x81/0xcd [ 5733.386547] [] device_release_driver+0x20/0x2d [ 5733.386552] [] bus_remove_device+0x114/0x128 [ 5733.386557] [] device_del+0x131/0x183 [ 5733.386562] [] usb_disable_device+0xa8/0x1d8 [usbcore] [ 5733.386573] [] usb_disconnect+0xab/0x11f [usbcore] [ 5733.386583] [] hub_thread+0x73b/0x1157 [usbcore] [ 5733.386593] [] kthread+0x95/0x9d [ 5733.386601] [] kernel_thread_helper+0x4/0x10 [ 5733.386607] [ 5733.386608] other info that might help us debug this: [ 5733.386609] [ 5733.386612] Possible unsafe locking scenario: [ 5733.386613] [ 5733.386615] CPU0 CPU1 [ 5733.386618] ---- ---- [ 5733.386620] lock(&hiddev->existancelock); [ 5733.386625] lock(minor_rwsem); [ 5733.386630] lock(&hiddev->existancelock); [ 5733.386635] lock(minor_rwsem); [ 5733.386639] [ 5733.386640] *** DEADLOCK *** [ 5733.386641] [ 5733.386644] 6 locks held by khubd/186: [ 5733.386646] #0: (&__lockdep_no_validate__){......}, at: [] hub_thread+0x14a/0x1157 [usbcore] [ 5733.386661] #1: (&__lockdep_no_validate__){......}, at: [] usb_disconnect+0x50/0x11f [usbcore] [ 5733.386677] #2: (hcd->bandwidth_mutex){+.+.+.}, at: [] usb_disconnect+0xa1/0x11f [usbcore] [ 5733.386693] #3: (&__lockdep_no_validate__){......}, at: [] device_release_driver+0x18/0x2d [ 5733.386704] #4: (&__lockdep_no_validate__){......}, at: [] device_release_driver+0x18/0x2d [ 5733.386714] #5: (&hiddev->existancelock){+.+...}, at: [] hiddev_disconnect+0x26/0x87 [usbhid] [ 5733.386727] [ 5733.386727] stack backtrace: [ 5733.386731] Pid: 186, comm: khubd Not tainted 3.2.0-custom-next-20120111+ #1 [ 5733.386734] Call Trace: [ 5733.386741] [] ? up+0x34/0x3b [ 5733.386747] [] print_circular_bug+0x1f8/0x209 [ 5733.386752] [] __lock_acquire+0xa80/0xd74 [ 5733.386756] [] ? trace_hardirqs_on_caller+0x15d/0x1a3 [ 5733.386763] [] ? vprintk+0x3f4/0x419 [ 5733.386774] [] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386779] [] lock_acquire+0xcb/0x10e [ 5733.386789] [] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386797] [] down_write+0x44/0x77 [ 5733.386807] [] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386818] [] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386825] [] hiddev_disconnect+0x3c/0x87 [usbhid] [ 5733.386830] [] hid_disconnect+0x3f/0x54 [ 5733.386834] [] hid_device_remove+0x4e/0x7a [ 5733.386839] [] __device_release_driver+0x81/0xcd [ 5733.386844] [] device_release_driver+0x20/0x2d [ 5733.386848] [] bus_remove_device+0x114/0x128 [ 5733.386854] [] device_del+0x131/0x183 [ 5733.386859] [] hid_destroy_device+0x1e/0x3d [ 5733.386865] [] usbhid_disconnect+0x36/0x42 [usbhid] [ 5733.386876] [] usb_unbind_interface+0x57/0x11f [usbcore] [ 5733.386882] [] __device_release_driver+0x81/0xcd [ 5733.386886] [] device_release_driver+0x20/0x2d [ 5733.386890] [] bus_remove_device+0x114/0x128 [ 5733.386895] [] device_del+0x131/0x183 [ 5733.386905] [] usb_disable_device+0xa8/0x1d8 [usbcore] [ 5733.386916] [] usb_disconnect+0xab/0x11f [usbcore] [ 5733.386921] [] ? __mutex_unlock_slowpath+0x130/0x141 [ 5733.386929] [] hub_thread+0x73b/0x1157 [usbcore] [ 5733.386935] [] ? finish_task_switch+0x78/0x150 [ 5733.386941] [] ? __init_waitqueue_head+0x4c/0x4c [ 5733.386950] [] ? usb_remote_wakeup+0x56/0x56 [usbcore] [ 5733.386955] [] kthread+0x95/0x9d [ 5733.386961] [] kernel_thread_helper+0x4/0x10 [ 5733.386966] [] ? retint_restore_args+0x13/0x13 [ 5733.386970] [] ? __init_kthread_worker+0x55/0x55 [ 5733.386974] [] ? gs_change+0x13/0x13 Signed-off-by: Ming Lei Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 7c297d305d5d..b1ec0e2aeb57 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -922,11 +922,11 @@ void hiddev_disconnect(struct hid_device *hid) struct hiddev *hiddev = hid->hiddev; struct usbhid_device *usbhid = hid->driver_data; + usb_deregister_dev(usbhid->intf, &hiddev_class); + mutex_lock(&hiddev->existancelock); hiddev->exist = 0; - usb_deregister_dev(usbhid->intf, &hiddev_class); - if (hiddev->open) { mutex_unlock(&hiddev->existancelock); usbhid_close(hiddev->hid); -- cgit v1.2.3-55-g7522 From c1c454b8691cc95aa83f19273ed7845914c70e83 Mon Sep 17 00:00:00 2001 From: K. Y. Srinivasan Date: Wed, 18 Jan 2012 08:57:14 -0800 Subject: HID: hyperv: Properly disconnect the input device When we unload the mouse driver, properly disconnect the input device. Signed-off-by: K. Y. Srinivasan Signed-off-by: Haiyang Zhang Reported-by: Fuzhou Chen Cc: stable Signed-off-by: Jiri Kosina --- drivers/hid/hid-hyperv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c index 0c33ae9cf0f0..406632472c1b 100644 --- a/drivers/hid/hid-hyperv.c +++ b/drivers/hid/hid-hyperv.c @@ -548,6 +548,7 @@ static int mousevsc_remove(struct hv_device *dev) struct mousevsc_dev *input_dev = hv_get_drvdata(dev); vmbus_close(dev->channel); + hid_hw_stop(input_dev->hid_device); hid_destroy_device(input_dev->hid_device); mousevsc_free_device(input_dev); -- cgit v1.2.3-55-g7522 From de47a9cd62771e3e78954d855d2304fbad4c5a44 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 2 Feb 2012 15:25:16 +0000 Subject: drm/radeon: fix use after free in ATRM bios reading code. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=45503 Reported-and-Debugged-by: mlambda@gmail.com Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 13ac63ba6075..98724fcb0088 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -59,8 +59,9 @@ static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios, obj = (union acpi_object *)buffer.pointer; memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length); + len = obj->buffer.length; kfree(buffer.pointer); - return obj->buffer.length; + return len; } bool radeon_atrm_supported(struct pci_dev *pdev) -- cgit v1.2.3-55-g7522 From 304a48400d9718f74ec35ae46f30868a5f4c4516 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 2 Feb 2012 10:18:00 -0500 Subject: drm/radeon/kms: fix TRAVIS panel setup Different versions of the DP to LVDS bridge chip need different panel mode settings depending on the chip version used. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41569 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_dp.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index a71557ce01dc..552b436451fd 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -564,9 +564,21 @@ int radeon_dp_get_panel_mode(struct drm_encoder *encoder, ENCODER_OBJECT_ID_NUTMEG) panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) == - ENCODER_OBJECT_ID_TRAVIS) - panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; - else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + ENCODER_OBJECT_ID_TRAVIS) { + u8 id[6]; + int i; + for (i = 0; i < 6; i++) + id[i] = radeon_read_dpcd_reg(radeon_connector, 0x503 + i); + if (id[0] == 0x73 && + id[1] == 0x69 && + id[2] == 0x76 && + id[3] == 0x61 && + id[4] == 0x72 && + id[5] == 0x54) + panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; + else + panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + } else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); if (tmp & 1) panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; -- cgit v1.2.3-55-g7522 From 52b53a0bf8026a322cfa6cfec6a10dd31fef8752 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Thu, 2 Feb 2012 10:26:24 -0500 Subject: drm/radeon/kms/blit: fix blit copy for very large buffers Evergreen and NI blit copy was broken if the buffer maps to a rectangle whose one dimension is 16384 (max dimension allowed by these chips). In the mainline kernel, the problem is exposed only when buffers are very large (1G), but it's still a problem. The problem could be exposed for smaller buffers if anyone modifies the algorithm for rectangle construction in r600_blit_create_rect() (the reason why someone would modify that algorithm is to tune the performance of buffer moves). The root cause was in i2f() function which only operated on range between 0 and 16383. Fix this by extending the range of i2f() function to 0 to 32767. While at it improve the function so that the range can be easily extended in the future (if it becomes necessary), cleanup lines over 80 characters, and replace in-line comments with one strategic comment that explains the crux of the function. Credits to michel@daenzer.net for pointing out the root cause of the bug. v2: Fix I2F_MAX_INPUT constant definition goof and warn only once if input argument is out of range. Edit the comment a little bit to avoid some linguistic confusion and make it look better in general. Signed-off-by: Ilija Hadzic Reviewed-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit_kms.c | 35 ++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index d996f4381130..accc032c103f 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -468,27 +468,42 @@ set_default_state(struct radeon_device *rdev) radeon_ring_write(ring, sq_stack_resource_mgmt_2); } +#define I2F_MAX_BITS 15 +#define I2F_MAX_INPUT ((1 << I2F_MAX_BITS) - 1) +#define I2F_SHIFT (24 - I2F_MAX_BITS) + +/* + * Converts unsigned integer into 32-bit IEEE floating point representation. + * Conversion is not universal and only works for the range from 0 + * to 2^I2F_MAX_BITS-1. Currently we only use it with inputs between + * 0 and 16384 (inclusive), so I2F_MAX_BITS=15 is enough. If necessary, + * I2F_MAX_BITS can be increased, but that will add to the loop iterations + * and slow us down. Conversion is done by shifting the input and counting + * down until the first 1 reaches bit position 23. The resulting counter + * and the shifted input are, respectively, the exponent and the fraction. + * The sign is always zero. + */ static uint32_t i2f(uint32_t input) { u32 result, i, exponent, fraction; - if ((input & 0x3fff) == 0) - result = 0; /* 0 is a special case */ + WARN_ON_ONCE(input > I2F_MAX_INPUT); + + if ((input & I2F_MAX_INPUT) == 0) + result = 0; else { - exponent = 140; /* exponent biased by 127; */ - fraction = (input & 0x3fff) << 10; /* cheat and only - handle numbers below 2^^15 */ - for (i = 0; i < 14; i++) { + exponent = 126 + I2F_MAX_BITS; + fraction = (input & I2F_MAX_INPUT) << I2F_SHIFT; + + for (i = 0; i < I2F_MAX_BITS; i++) { if (fraction & 0x800000) break; else { - fraction = fraction << 1; /* keep - shifting left until top bit = 1 */ + fraction = fraction << 1; exponent = exponent - 1; } } - result = exponent << 23 | (fraction & 0x7fffff); /* mask - off top bit; assumed 1 */ + result = exponent << 23 | (fraction & 0x7fffff); } return result; } -- cgit v1.2.3-55-g7522 From 2885e25c422fb68208f677f944a45fce8eda2a3c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 2 Feb 2012 10:36:33 -0800 Subject: driver core: cpu: remove kernel warning when removing a cpu With the movement of the cpu sysdev code to be real stuct devices, now when we remove a cpu from the system, the driver core rightfully complains that there is not a release method for this device. For now, paper over this issue by quieting the driver core, but comment this in detail. This will be resolved in future kernels to be solved properly. Reported-by: Konrad Rzeszutek Wilk Tested-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman --- drivers/base/cpu.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index db87e78d7459..23f2c4cd48d1 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -208,6 +208,25 @@ static ssize_t print_cpus_offline(struct device *dev, } static DEVICE_ATTR(offline, 0444, print_cpus_offline, NULL); +static void cpu_device_release(struct device *dev) +{ + /* + * This is an empty function to prevent the driver core from spitting a + * warning at us. Yes, I know this is directly opposite of what the + * documentation for the driver core and kobjects say, and the author + * of this code has already been publically ridiculed for doing + * something as foolish as this. However, at this point in time, it is + * the only way to handle the issue of statically allocated cpu + * devices. The different architectures will have their cpu device + * code reworked to properly handle this in the near future, so this + * function will then be changed to correctly free up the memory held + * by the cpu device. + * + * Never copy this way of doing things, or you too will be made fun of + * on the linux-kerenl list, you have been warned. + */ +} + /* * register_cpu - Setup a sysfs device for a CPU. * @cpu - cpu->hotpluggable field set to 1 will generate a control file in @@ -223,6 +242,7 @@ int __cpuinit register_cpu(struct cpu *cpu, int num) cpu->node_id = cpu_to_node(num); cpu->dev.id = num; cpu->dev.bus = &cpu_subsys; + cpu->dev.release = cpu_device_release; error = device_register(&cpu->dev); if (!error && cpu->hotpluggable) register_cpu_control(cpu); -- cgit v1.2.3-55-g7522 From c0ca9bc508c1d8d612863c2481f28168e517da7d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 2 Feb 2012 14:23:34 -0200 Subject: usb: host: Distinguish Kconfig text for Freescale controllers Distinguish Kconfig text by providing the Freescale family name. Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 91413cac97be..bc907693f27a 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -130,7 +130,7 @@ config USB_FSL_MPH_DR_OF tristate config USB_EHCI_FSL - bool "Support for Freescale on-chip EHCI USB controller" + bool "Support for Freescale PPC on-chip EHCI USB controller" depends on USB_EHCI_HCD && FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF @@ -138,7 +138,7 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_MXC - bool "Support for Freescale on-chip EHCI USB controller" + bool "Support for Freescale i.MX on-chip EHCI USB controller" depends on USB_EHCI_HCD && ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- -- cgit v1.2.3-55-g7522 From ed2833ac7ee86ee00f6dd3085a32752209fd8b6e Mon Sep 17 00:00:00 2001 From: Neil Zhang Date: Mon, 30 Jan 2012 11:44:23 +0800 Subject: usb: otg: mv_otg: Add dependence This otg driver depends on marvell EHCI driver, so add the dependence. It can fix the following build error on i386: ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Neil Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 76d629345418..735ef4c2339a 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -118,7 +118,7 @@ config FSL_USB2_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_MV_UDC && USB_SUSPEND + depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help -- cgit v1.2.3-55-g7522 From 529febeee680dc22416fca033151a5e8bc620447 Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Thu, 2 Feb 2012 11:23:14 +0800 Subject: powerpc/usb: fix issue of CPU halt when missing USB PHY clock when missing USB PHY clock, kernel booting up will halt during USB initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid CPU hang in this case. Signed-off-by: Shengzhou Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 11 +++++++++-- drivers/usb/host/ehci-fsl.h | 1 + 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b556a72264d1..c26a82e83f6e 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -239,7 +239,7 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); } -static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) +static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) { struct usb_hcd *hcd = ehci_to_hcd(ehci); struct fsl_usb2_platform_data *pdata; @@ -299,12 +299,19 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) #endif out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); } + + if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) { + printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); + return -ENODEV; + } + return 0; } /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_fsl_reinit(struct ehci_hcd *ehci) { - ehci_fsl_usb_setup(ehci); + if (ehci_fsl_usb_setup(ehci)) + return -ENODEV; ehci_port_power(ehci, 0); return 0; diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 491806221165..bdf43e2adc51 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -45,5 +45,6 @@ #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e #endif /* _EHCI_FSL_H */ -- cgit v1.2.3-55-g7522 From e4436a7c17ac2b5e138f93f83a541cba9b311685 Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Fri, 27 Jan 2012 20:27:32 +0530 Subject: usb: Skip PCI USB quirk handling for Netlogic XLP The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by: Jayachandran C Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index caf87428ca43..ac53a662a6a3 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -867,6 +867,12 @@ hc_init: static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) { + /* Skip Netlogic mips SoC's internal PCI USB controller. + * This device does not need/support EHCI/OHCI handoff + */ + if (pdev->vendor == 0x184e) /* vendor Netlogic */ + return; + if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) quirk_usb_handoff_uhci(pdev); else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI) -- cgit v1.2.3-55-g7522 From 36f8ecbf717e343393643fe2302a1dfee14e780d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 27 Jan 2012 15:47:03 -0800 Subject: uwb & wusb & usb wireless controllers: fix kconfig error & build errors Fix kconfig warnings and build errors in UWB/WUSB/USB_HWA etc. by making all of these related symbols depend on UWB. warning: (USB_WHCI_HCD && USB_HWA_HCD) selects USB_WUSB which has unmet direct dependencies (USB_SUPPORT && EXPERIMENTAL && USB && PCI && UWB) warning: (USB_HWA_HCD) selects UWB_HWA which has unmet direct dependencies (UWB && USB) which lead to: ERROR: "uwb_rsv_establish" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_register" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_get_usable_mas" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_destroy" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_radio_stop" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_terminate" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_unregister" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_init" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rc_reset_all" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_radio_start" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_create" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rc_put" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "uwb_rc_get_by_grandpa" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "__umc_driver_register" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "umc_driver_unregister" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "whci_wait_for" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "uwb_rc_get_by_grandpa" [drivers/usb/host/hwa-hc.ko] undefined! ERROR: "uwb_rc_put" [drivers/usb/host/hwa-hc.ko] undefined! Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index bc907693f27a..353cdd488b93 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -546,7 +546,7 @@ config USB_RENESAS_USBHS_HCD config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on PCI && USB + depends on PCI && USB && UWB select USB_WUSB select UWB_WHCI help @@ -559,7 +559,7 @@ config USB_WHCI_HCD config USB_HWA_HCD tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on USB + depends on USB && UWB select USB_WUSB select UWB_HWA help -- cgit v1.2.3-55-g7522 From 97bb59a03dd6767fcc00be09b0c6d9e5294eeea6 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 24 Jan 2012 10:08:36 -0600 Subject: rbd: fix a memory leak in rbd_get_client() If an existing rbd client is found to be suitable for use in rbd_get_client(), the rbd_options structure is not being freed as it should. Fix that. Signed-off-by: Alex Elder Signed-off-by: Sage Weil --- drivers/block/rbd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 148ab944378d..7d8f8ddb3359 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -380,6 +380,7 @@ static int rbd_get_client(struct rbd_device *rbd_dev, const char *mon_addr, rbdc = __rbd_client_find(opt); if (rbdc) { ceph_destroy_options(opt); + kfree(rbd_opts); /* using an existing client */ kref_get(&rbdc->kref); -- cgit v1.2.3-55-g7522 From 486d8b9f88cd0871a716e2f16873e811ee6c1ece Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 2 Feb 2012 12:55:58 -0800 Subject: IB/srpt: Use DEFINE_SPINLOCK()/LIST_HEAD() Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srpt/ib_srpt.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index cd5d05e22a77..284cb5092ee4 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -69,8 +69,8 @@ MODULE_LICENSE("Dual BSD/GPL"); */ static u64 srpt_service_guid; -static spinlock_t srpt_dev_lock; /* Protects srpt_dev_list. */ -static struct list_head srpt_dev_list; /* List of srpt_device structures. */ +static DEFINE_SPINLOCK(srpt_dev_lock); /* Protects srpt_dev_list. */ +static LIST_HEAD(srpt_dev_list); /* List of srpt_device structures. */ static unsigned srp_max_req_size = DEFAULT_MAX_REQ_SIZE; module_param(srp_max_req_size, int, 0444); @@ -4010,9 +4010,6 @@ static int __init srpt_init_module(void) goto out; } - spin_lock_init(&srpt_dev_lock); - INIT_LIST_HEAD(&srpt_dev_list); - ret = -ENODEV; srpt_target = target_fabric_configfs_init(THIS_MODULE, "srpt"); if (!srpt_target) { -- cgit v1.2.3-55-g7522 From f225066b64eaffe3a51ee488fb750c82fbcd971c Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 2 Feb 2012 12:55:58 -0800 Subject: IB/srpt: Use ARRAY_SIZE() instead of open-coding Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srpt/ib_srpt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 284cb5092ee4..38ef61dbee0a 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -3264,8 +3264,7 @@ static void srpt_add_one(struct ib_device *device) for (i = 0; i < sdev->srq_size; ++i) srpt_post_recv(sdev, sdev->ioctx_ring[i]); - WARN_ON(sdev->device->phys_port_cnt - > sizeof(sdev->port)/sizeof(sdev->port[0])); + WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port)); for (i = 1; i <= sdev->device->phys_port_cnt; i++) { sport = &sdev->port[i - 1]; -- cgit v1.2.3-55-g7522 From ebfded8c4b34caea450709ce467e67483fa4d8df Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 2 Feb 2012 12:55:59 -0800 Subject: IB/srpt: Remove unneeded include Signed-off-by: Jesper Juhl Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srpt/ib_srpt.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index b4b4bbcd7f16..61e52b830816 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -35,7 +35,6 @@ #ifndef IB_SRPT_H #define IB_SRPT_H -#include #include #include #include -- cgit v1.2.3-55-g7522 From d23a4b3fd6ef70b80411b39b8c8bc548a219ce70 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Sun, 29 Jan 2012 13:57:43 -0600 Subject: rbd: fix safety of rbd_put_client() The rbd_client structure uses a kref to arrange for cleaning up and freeing an instance when its last reference is dropped. The cleanup routine is rbd_client_release(), and one of the things it does is delete the rbd_client from rbd_client_list. It acquires node_lock to do so, but the way it is done is still not safe. The problem is that when attempting to reuse an existing rbd_client, the structure found might already be in the process of getting destroyed and cleaned up. Here's the scenario, with "CLIENT" representing an existing rbd_client that's involved in the race: Thread on CPU A | Thread on CPU B --------------- | --------------- rbd_put_client(CLIENT) | rbd_get_client() kref_put() | (acquires node_lock) kref->refcount becomes 0 | __rbd_client_find() returns CLIENT calls rbd_client_release() | kref_get(&CLIENT->kref); | (releases node_lock) (acquires node_lock) | deletes CLIENT from list | ...and starts using CLIENT... (releases node_lock) | and frees CLIENT | <-- but CLIENT gets freed here Fix this by having rbd_put_client() acquire node_lock. The result could still be improved, but at least it avoids this problem. Signed-off-by: Alex Elder Signed-off-by: Sage Weil --- drivers/block/rbd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 7d8f8ddb3359..7f40cb4553c9 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -407,15 +407,15 @@ done_err: /* * Destroy ceph client + * + * Caller must hold node_lock. */ static void rbd_client_release(struct kref *kref) { struct rbd_client *rbdc = container_of(kref, struct rbd_client, kref); dout("rbd_release_client %p\n", rbdc); - spin_lock(&node_lock); list_del(&rbdc->node); - spin_unlock(&node_lock); ceph_destroy_client(rbdc->client); kfree(rbdc->rbd_opts); @@ -428,7 +428,9 @@ static void rbd_client_release(struct kref *kref) */ static void rbd_put_client(struct rbd_device *rbd_dev) { + spin_lock(&node_lock); kref_put(&rbd_dev->rbd_client->kref, rbd_client_release); + spin_unlock(&node_lock); rbd_dev->rbd_client = NULL; rbd_dev->client = NULL; } -- cgit v1.2.3-55-g7522 From 321bf4ed5ff5f7c62ef59f33b7eec5b154391f0a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 30 Jan 2012 13:57:12 -0800 Subject: drivers/base/memory.c: fix memory_dev_init() long delay One system with 2048g ram, reported soft lockup on recent kernel. [ 34.426749] cpu_dev_init done [ 61.166399] BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] [ 61.166733] Modules linked in: [ 61.166904] irq event stamp: 1935610 [ 61.178431] hardirqs last enabled at (1935609): [] mutex_lock_nested+0x299/0x2b4 [ 61.178923] hardirqs last disabled at (1935610): [] apic_timer_interrupt+0x6b/0x80 [ 61.198767] softirqs last enabled at (1935476): [] __do_softirq+0x195/0x1ab [ 61.218604] softirqs last disabled at (1935471): [] call_softirq+0x1c/0x30 [ 61.238408] CPU 0 [ 61.238549] Modules linked in: [ 61.238744] [ 61.238825] Pid: 1, comm: swapper/0 Not tainted 3.3.0-rc1-tip-yh-02076-g962f689-dirty #171 [ 61.278212] RIP: 0010:[] [] lock_release+0x90/0x9c [ 61.278627] RSP: 0018:ffff883f64dbfd70 EFLAGS: 00000246 [ 61.298287] RAX: ffff883f64dc0000 RBX: 0000000000000000 RCX: 000000000000008b [ 61.298690] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 61.318383] RBP: ffff883f64dbfda0 R08: 0000000000000001 R09: 000000000000008b [ 61.338215] R10: 0000000000000000 R11: 0000000000000000 R12: ffff883f64dbfd10 [ 61.338610] R13: ffff883f64dc0708 R14: ffff883f64dc0708 R15: ffffffff81095657 [ 61.358299] FS: 0000000000000000(0000) GS:ffff883f7d600000(0000) knlGS:0000000000000000 [ 61.378118] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 61.378450] CR2: 0000000000000000 CR3: 00000000024af000 CR4: 00000000000007f0 [ 61.398144] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 61.417918] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 61.418260] Process swapper/0 (pid: 1, threadinfo ffff883f64dbe000, task ffff883f64dc0000) [ 61.445358] Stack: [ 61.445511] 0000000000000002 ffff897f649ba168 ffff883f64dbfe10 ffff88ff64bb57a8 [ 61.458040] 0000000000000000 0000000000000000 ffff883f64dbfdc0 ffffffff81ceb1b4 [ 61.458491] 000000000011608c ffff88ff64bb58a8 ffff883f64dbfdf0 ffffffff81c57638 [ 61.478215] Call Trace: [ 61.478367] [] _raw_spin_unlock+0x21/0x2e [ 61.497994] [] klist_next+0x9e/0xbc [ 61.498264] [] next_device+0xe/0x1e [ 61.517867] [] subsys_find_device_by_id+0xb7/0xd6 [ 61.518197] [] find_memory_block_hinted+0x3d/0x66 [ 61.537927] [] find_memory_block+0x10/0x12 [ 61.538193] [] add_memory_section+0x35/0x9e [ 61.557932] [] memory_dev_init+0x68/0xda [ 61.558227] [] driver_init+0x97/0xa7 [ 61.577853] [] kernel_init+0xf6/0x1c0 [ 61.578140] [] kernel_thread_helper+0x4/0x10 [ 61.597850] [] ? retint_restore_args+0xe/0xe [ 61.598144] [] ? start_kernel+0x3ab/0x3ab [ 61.617826] [] ? gs_change+0xb/0xb [ 61.618060] Code: 10 48 83 3b 00 eb e8 4c 89 f2 44 89 fe 4c 89 ef e8 e1 fe ff ff 65 48 8b 04 25 40 bc 00 00 c7 80 cc 06 00 00 00 00 00 00 41 54 9d <5e> 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 41 57 41 89 cf [ 89.285380] memory_dev_init done Finally it takes about 55s to create 16400 memory entries. Root cause: for x86_64, 2048g (with 2g hole at [2g,4g), and TOP2 will be 2050g), will have 16400 memory block. find_memory_block/subsys_find_device_by_id will be expensive with that many entries. Actually, we don't need to find that memory block for BOOT path. Skip that finding make it get back to normal. [ 34.466696] cpu_dev_init done [ 35.290080] memory_dev_init done Also solved the delay with topology_init when sections_per_block is not 1. Signed-off-by: Yinghai Lu Cc: Kay Sievers Cc: Nathan Fontenot Cc: Robin Holt Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/base/memory.c | 31 ++++++++++++++++++++++++++----- drivers/base/node.c | 8 ++++++++ 2 files changed, 34 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/base/memory.c b/drivers/base/memory.c index ed5de58c340f..9e60dbe9fd94 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -572,19 +572,36 @@ static int init_memory_block(struct memory_block **memory, } static int add_memory_section(int nid, struct mem_section *section, + struct memory_block **mem_p, unsigned long state, enum mem_add_context context) { - struct memory_block *mem; + struct memory_block *mem = NULL; + int scn_nr = __section_nr(section); int ret = 0; mutex_lock(&mem_sysfs_mutex); - mem = find_memory_block(section); + if (context == BOOT) { + /* same memory block ? */ + if (mem_p && *mem_p) + if (scn_nr >= (*mem_p)->start_section_nr && + scn_nr <= (*mem_p)->end_section_nr) { + mem = *mem_p; + kobject_get(&mem->dev.kobj); + } + } else + mem = find_memory_block(section); + if (mem) { mem->section_count++; kobject_put(&mem->dev.kobj); - } else + } else { ret = init_memory_block(&mem, section, state); + /* store memory_block pointer for next loop */ + if (!ret && context == BOOT) + if (mem_p) + *mem_p = mem; + } if (!ret) { if (context == HOTPLUG && @@ -627,7 +644,7 @@ int remove_memory_block(unsigned long node_id, struct mem_section *section, */ int register_new_memory(int nid, struct mem_section *section) { - return add_memory_section(nid, section, MEM_OFFLINE, HOTPLUG); + return add_memory_section(nid, section, NULL, MEM_OFFLINE, HOTPLUG); } int unregister_memory_section(struct mem_section *section) @@ -647,6 +664,7 @@ int __init memory_dev_init(void) int ret; int err; unsigned long block_sz; + struct memory_block *mem = NULL; ret = subsys_system_register(&memory_subsys, NULL); if (ret) @@ -662,7 +680,10 @@ int __init memory_dev_init(void) for (i = 0; i < NR_MEM_SECTIONS; i++) { if (!present_section_nr(i)) continue; - err = add_memory_section(0, __nr_to_section(i), MEM_ONLINE, + /* don't need to reuse memory_block if only one per block */ + err = add_memory_section(0, __nr_to_section(i), + (sections_per_block == 1) ? NULL : &mem, + MEM_ONLINE, BOOT); if (!ret) ret = err; diff --git a/drivers/base/node.c b/drivers/base/node.c index 44f427a66117..90aa2a11a933 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -456,7 +456,15 @@ static int link_mem_sections(int nid) if (!present_section_nr(section_nr)) continue; mem_sect = __nr_to_section(section_nr); + + /* same memblock ? */ + if (mem_blk) + if ((section_nr >= mem_blk->start_section_nr) && + (section_nr <= mem_blk->end_section_nr)) + continue; + mem_blk = find_memory_block_hinted(mem_sect, mem_blk); + ret = register_mem_sect_under_node(mem_blk, nid); if (!err) err = ret; -- cgit v1.2.3-55-g7522 From 1bab08c075e250b0a9bec63fd4c06812bd413a3f Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Mon, 30 Jan 2012 13:08:11 -0800 Subject: drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer KDFONTOP(GET) currently fails with EIO when being run in a 32bit userland with a 64bit kernel if the font width is not 8. This is because the compatibility layer introduced by e9216651 ("tty: handle VT specific compat ioctls in vt driver") forces the addition of the KD_FONT_FLAG_OLD flag, which makes con_font_get return EIO in such case. This flag should *not* be set for KDFONTOP, since it's actually the whole point of this flag (see comment in con_font_set for instance). Signed-off-by: Samuel Thibault Cc: Arnd Bergmann Cc: Arthur Taylor Cc: Jiri Slaby Cc: Jiri Olsa Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt_ioctl.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 5e096f43bcea..65447c5f91d7 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -1463,7 +1463,6 @@ compat_kdfontop_ioctl(struct compat_console_font_op __user *fontop, if (!perm && op->op != KD_FONT_OP_GET) return -EPERM; op->data = compat_ptr(((struct compat_console_font_op *)op)->data); - op->flags |= KD_FONT_FLAG_OLD; i = con_font_op(vc, op); if (i) return i; -- cgit v1.2.3-55-g7522 From 5f7b6d19723427a1d406c9640fe6f48fa97b5e1a Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 1 Feb 2012 00:11:23 +0900 Subject: serial: samsung: Add support for EXYNOS4212 and EXYNOS4412 This should be added for EXYNOS4212 and EXYNOS4412 SoCs. Cc: Thomas Abraham Cc: Greg Kroah-Hartman Cc: stable Signed-off-by: Kukjin Kim Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index f96f37b5fec6..3b07fb9ac915 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1593,7 +1593,8 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { #define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL #endif -#ifdef CONFIG_CPU_EXYNOS4210 +#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \ + defined(CONFIG_SOC_EXYNOS4412) static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung Exynos4 UART", -- cgit v1.2.3-55-g7522 From 7ccfe015a6e7f01734963f51b0f67126e21068ce Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 1 Feb 2012 00:39:11 +0900 Subject: serial: samsung: Add support for EXYNOS5250 Cc: Thomas Abraham Cc: Greg Kroah-Hartman Signed-off-by: Kukjin Kim Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 3b07fb9ac915..c55e5fb16fa3 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1594,7 +1594,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { #endif #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \ - defined(CONFIG_SOC_EXYNOS4412) + defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { .info = &(struct s3c24xx_uart_info) { .name = "Samsung Exynos4 UART", -- cgit v1.2.3-55-g7522 From 3e5ba466d515eb3fb1e0e975a3d8e499126ae2b5 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Mon, 30 Jan 2012 23:00:08 +0100 Subject: vmw_balloon: fix for a -Wuninitialized warning Fix for a -Wuninitialized compiler warning. Changed return value of vmballoon_send_lock_page() from bool to int to be able to distinguish between the error cases to avoid uninitialized use of hv_status in vmballoon_reserve_page() Signed-off-by: Danny Kukawka Signed-off-by: Greg Kroah-Hartman --- drivers/misc/vmw_balloon.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index cd41d403c9df..cb56e270da11 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -314,7 +314,7 @@ static bool vmballoon_send_get_target(struct vmballoon *b, u32 *new_target) * fear that guest will need it. Host may reject some pages, we need to * check the return value and maybe submit a different page. */ -static bool vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn, +static int vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn, unsigned int *hv_status) { unsigned long status, dummy; @@ -322,17 +322,17 @@ static bool vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn, pfn32 = (u32)pfn; if (pfn32 != pfn) - return false; + return -1; STATS_INC(b->stats.lock); *hv_status = status = VMWARE_BALLOON_CMD(LOCK, pfn, dummy); if (vmballoon_check_status(b, status)) - return true; + return 0; pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status); STATS_INC(b->stats.lock_fail); - return false; + return 1; } /* @@ -411,7 +411,7 @@ static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep) struct page *page; gfp_t flags; unsigned int hv_status; - bool locked = false; + int locked; flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP; do { @@ -431,7 +431,7 @@ static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep) /* inform monitor */ locked = vmballoon_send_lock_page(b, page_to_pfn(page), &hv_status); - if (!locked) { + if (locked > 0) { STATS_INC(b->stats.refused_alloc); if (hv_status == VMW_BALLOON_ERROR_RESET || @@ -449,7 +449,7 @@ static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep) if (++b->n_refused_pages >= VMW_BALLOON_MAX_REFUSED) return -EIO; } - } while (!locked); + } while (locked != 0); /* track allocated page */ list_add(&page->lru, &b->pages); -- cgit v1.2.3-55-g7522 From 474de3bbadd9cb75ffc32cc759c40d868343d46c Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Thu, 2 Feb 2012 14:20:29 +0100 Subject: cs5535-mfgpt: don't call __init function from __devinit Fix scan_timers() to be __devinit and not __init since the function get called from cs5535_mfgpt_probe which is __devinit. Signed-off-by: Danny Kukawka Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cs5535-mfgpt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c index bc685bfc4c33..87a390de054c 100644 --- a/drivers/misc/cs5535-mfgpt.c +++ b/drivers/misc/cs5535-mfgpt.c @@ -262,7 +262,7 @@ static void __init reset_all_timers(void) * In other cases (such as with VSAless OpenFirmware), the system firmware * leaves timers available for us to use. */ -static int __init scan_timers(struct cs5535_mfgpt_chip *mfgpt) +static int __devinit scan_timers(struct cs5535_mfgpt_chip *mfgpt) { struct cs5535_mfgpt_timer timer = { .chip = mfgpt }; unsigned long flags; -- cgit v1.2.3-55-g7522 From b5266ea675c5a041e2852c7ccec4cf2d4f5e0cf4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 1 Feb 2012 12:31:47 +0800 Subject: mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip Signed-off-by: Axel Lin Acked-by: Michał Mirosław Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cb710/core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c index 68cd05b6d829..85cc7710193c 100644 --- a/drivers/misc/cb710/core.c +++ b/drivers/misc/cb710/core.c @@ -245,6 +245,7 @@ static int __devinit cb710_probe(struct pci_dev *pdev, if (err) return err; + spin_lock_init(&chip->irq_lock); chip->pdev = pdev; chip->iobase = pcim_iomap_table(pdev)[0]; -- cgit v1.2.3-55-g7522 From 976d98cb726601972fafb28173d4526ce3603415 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Fri, 3 Feb 2012 15:14:17 +0800 Subject: usb: musb: fix a build error on mips On mips, we got: drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsl' arch/mips/include/asm/io.h:529: error: previous definition of 'readsl' was here drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsw' arch/mips/include/asm/io.h:528: error: previous definition of 'readsw' was here drivers/usb/musb/musb_io.h:48: error: conflicting types for 'readsb' so, should add !defined(CONFIG_MIPS) too. Cc: Felipe Balbi Cc: Greg Kroah-Hartman Signed-off-by: WANG Cong Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_io.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index e61aa95f2d2a..1d5eda26fbd1 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -39,7 +39,8 @@ #if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \ && !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \ - && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) + && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \ + && !defined(CONFIG_MIPS) static inline void readsl(const void __iomem *addr, void *buf, int len) { insl((unsigned long)addr, buf, len); } static inline void readsw(const void __iomem *addr, void *buf, int len) -- cgit v1.2.3-55-g7522 From 82b982c9a697e7be0745523a53334fe38a4582c8 Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Fri, 3 Feb 2012 00:19:07 -0800 Subject: Input: i8042 - add Lenovo Ideapad U455 to 'reset' blacklist From 2d5a38a56453421e82428155f4b00303f3fb19b2 Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Wed, 1 Feb 2012 03:11:53 +0400 Subject: [PATCH] Input: i8042 - add Lenovo Ideapad U455 to 'reset' blacklist Lenovo Ideapad U455 needs to be in the reset quirk list for its touchpad's proper function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=40672 Signed-off-by: Igor Murzov Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index b4cfc6c8be89..5ec774d6c82b 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -512,6 +512,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"), }, }, + { + /* Lenovo Ideapad U455 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "20046"), + }, + }, { } }; -- cgit v1.2.3-55-g7522 From 08bc3d4e67d486a9b2a5065c1c2ebaf13048a465 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 30 Jan 2012 12:05:55 +0100 Subject: drivers/gpu/drm/drm_ioc32.c: initialize all fields The c32 structure is allocated on the stack and its idx field is not initialized before copying it to user level. This patch takes the value from the result of the ioctl, as done for the other fields. Signed-off-by: Julia Lawall Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_ioc32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index ddd70db45f76..637fcc3766c7 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -315,7 +315,8 @@ static int compat_drm_getclient(struct file *file, unsigned int cmd, if (err) return err; - if (__get_user(c32.auth, &client->auth) + if (__get_user(c32.idx, &client->idx) + || __get_user(c32.auth, &client->auth) || __get_user(c32.pid, &client->pid) || __get_user(c32.uid, &client->uid) || __get_user(c32.magic, &client->magic) -- cgit v1.2.3-55-g7522 From 3fe89a0c799c62de68e9e6d6e33899cd7e0da901 Mon Sep 17 00:00:00 2001 From: Matthijs Kooijman Date: Thu, 2 Feb 2012 21:23:11 +0100 Subject: drm/radeon: do not continue after error from r600_ib_test This return statement got dropped while fixing the conflicts introduced in 7a7e8734ac3. Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index ae09fe82afbc..9be353b894cc 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3191,6 +3191,7 @@ static int evergreen_startup(struct radeon_device *rdev) if (r) { DRM_ERROR("radeon: failed testing IB (%d).\n", r); rdev->accel_working = false; + return r; } r = r600_audio_init(rdev); -- cgit v1.2.3-55-g7522 From 3af336376f77859da84bb1156ef29d5337b316a9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:27:32 +0300 Subject: IB/srpt: Fix ERR_PTR() vs. NULL checking confusion transport_init_session() and target_fabric_configfs_init() don't return NULL pointers, they only return ERR_PTRs or valid pointers. Signed-off-by: Dan Carpenter Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srpt/ib_srpt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 38ef61dbee0a..c125614ac256 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2595,7 +2595,7 @@ static int srpt_cm_req_recv(struct ib_cm_id *cm_id, } ch->sess = transport_init_session(); - if (!ch->sess) { + if (IS_ERR(ch->sess)) { rej->reason = __constant_cpu_to_be32( SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES); pr_debug("Failed to create session\n"); @@ -4009,10 +4009,10 @@ static int __init srpt_init_module(void) goto out; } - ret = -ENODEV; srpt_target = target_fabric_configfs_init(THIS_MODULE, "srpt"); - if (!srpt_target) { + if (IS_ERR(srpt_target)) { printk(KERN_ERR "couldn't register\n"); + ret = PTR_ERR(srpt_target); goto out; } -- cgit v1.2.3-55-g7522 From f8447d6c213273b444c81eaa2449f55510229d4f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Sat, 14 Jan 2012 20:58:43 +0100 Subject: mfd: Store twl6040-codec mclk configuration Store the last used mclk configuration for the PLL. Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz --- drivers/mfd/twl6040-core.c | 3 +++ include/linux/mfd/twl6040.h | 2 ++ 2 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index dda86293dc9f..c2088f4c4547 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -282,6 +282,7 @@ int twl6040_power(struct twl6040 *twl6040, int on) /* Default PLL configuration after power up */ twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL; twl6040->sysclk = 19200000; + twl6040->mclk = 32768; } else { /* already powered-down */ if (!twl6040->power_count) { @@ -305,6 +306,7 @@ int twl6040_power(struct twl6040 *twl6040, int on) twl6040_power_down(twl6040); } twl6040->sysclk = 0; + twl6040->mclk = 0; } out: @@ -421,6 +423,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, } twl6040->sysclk = freq_out; + twl6040->mclk = freq_in; twl6040->pll = pll_id; pll_out: diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 2463c2619596..9bc9ac651dad 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -187,8 +187,10 @@ struct twl6040 { int rev; u8 vibra_ctrl_cache[2]; + /* PLL configuration */ int pll; unsigned int sysclk; + unsigned int mclk; unsigned int irq; unsigned int irq_base; -- cgit v1.2.3-55-g7522 From 2bd05db718cf452fe235c7c08083b2e60f787f3a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Sat, 14 Jan 2012 20:58:44 +0100 Subject: mfd: Avoid twl6040-codec PLL reconfiguration when not needed Do not reconfigure the PLL in case it has been configured already with the requested parameters. In case of different PLL configuration do only the needed changes. This can save considerable amount of time since we can avoid the defined protocol (with delays) for the PLL configuration. Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz --- drivers/mfd/twl6040-core.c | 125 +++++++++++++++++++++++++++------------------ 1 file changed, 74 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index c2088f4c4547..b2d8e512d3cb 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -326,23 +326,38 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL); lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); + /* Force full reconfiguration when switching between PLL */ + if (pll_id != twl6040->pll) { + twl6040->sysclk = 0; + twl6040->mclk = 0; + } + switch (pll_id) { case TWL6040_SYSCLK_SEL_LPPLL: /* low-power PLL divider */ - switch (freq_out) { - case 17640000: - lppllctl |= TWL6040_LPLLFIN; - break; - case 19200000: - lppllctl &= ~TWL6040_LPLLFIN; - break; - default: - dev_err(twl6040->dev, - "freq_out %d not supported\n", freq_out); - ret = -EINVAL; - goto pll_out; + /* Change the sysclk configuration only if it has been canged */ + if (twl6040->sysclk != freq_out) { + switch (freq_out) { + case 17640000: + lppllctl |= TWL6040_LPLLFIN; + break; + case 19200000: + lppllctl &= ~TWL6040_LPLLFIN; + break; + default: + dev_err(twl6040->dev, + "freq_out %d not supported\n", + freq_out); + ret = -EINVAL; + goto pll_out; + } + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, + lppllctl); } - twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); + + /* The PLL in use has not been change, we can exit */ + if (twl6040->pll == pll_id) + break; switch (freq_in) { case 32768: @@ -373,48 +388,56 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, goto pll_out; } - hppllctl &= ~TWL6040_MCLK_MSK; + if (twl6040->mclk != freq_in) { + hppllctl &= ~TWL6040_MCLK_MSK; + + switch (freq_in) { + case 12000000: + /* PLL enabled, active mode */ + hppllctl |= TWL6040_MCLK_12000KHZ | + TWL6040_HPLLENA; + break; + case 19200000: + /* + * PLL disabled + * (enable PLL if MCLK jitter quality + * doesn't meet specification) + */ + hppllctl |= TWL6040_MCLK_19200KHZ; + break; + case 26000000: + /* PLL enabled, active mode */ + hppllctl |= TWL6040_MCLK_26000KHZ | + TWL6040_HPLLENA; + break; + case 38400000: + /* PLL enabled, active mode */ + hppllctl |= TWL6040_MCLK_38400KHZ | + TWL6040_HPLLENA; + break; + default: + dev_err(twl6040->dev, + "freq_in %d not supported\n", freq_in); + ret = -EINVAL; + goto pll_out; + } - switch (freq_in) { - case 12000000: - /* PLL enabled, active mode */ - hppllctl |= TWL6040_MCLK_12000KHZ | - TWL6040_HPLLENA; - break; - case 19200000: /* - * PLL disabled - * (enable PLL if MCLK jitter quality - * doesn't meet specification) + * enable clock slicer to ensure input waveform is + * square */ - hppllctl |= TWL6040_MCLK_19200KHZ; - break; - case 26000000: - /* PLL enabled, active mode */ - hppllctl |= TWL6040_MCLK_26000KHZ | - TWL6040_HPLLENA; - break; - case 38400000: - /* PLL enabled, active mode */ - hppllctl |= TWL6040_MCLK_38400KHZ | - TWL6040_HPLLENA; - break; - default: - dev_err(twl6040->dev, - "freq_in %d not supported\n", freq_in); - ret = -EINVAL; - goto pll_out; - } + hppllctl |= TWL6040_HPLLSQRENA; - /* enable clock slicer to ensure input waveform is square */ - hppllctl |= TWL6040_HPLLSQRENA; - - twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, hppllctl); - usleep_range(500, 700); - lppllctl |= TWL6040_HPLLSEL; - twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); - lppllctl &= ~TWL6040_LPLLENA; - twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); + twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, + hppllctl); + usleep_range(500, 700); + lppllctl |= TWL6040_HPLLSEL; + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, + lppllctl); + lppllctl &= ~TWL6040_LPLLENA; + twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, + lppllctl); + } break; default: dev_err(twl6040->dev, "unknown pll id %d\n", pll_id); -- cgit v1.2.3-55-g7522 From 8149415efa033ca138c0080ded77329e98697c7b Mon Sep 17 00:00:00 2001 From: John W. Linville Date: Mon, 30 Jan 2012 10:55:13 -0500 Subject: ath9k: use WARN_ON_ONCE in ath_rc_get_highest_rix The device seems to survive the issue, so no need to flood the logs about it... Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/rc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index b3c3798fe513..635b592ad961 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -694,7 +694,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc, return rate; /* This should not happen */ - WARN_ON(1); + WARN_ON_ONCE(1); rate = ath_rc_priv->valid_rate_index[0]; -- cgit v1.2.3-55-g7522 From b7097eb75fa11c302dcdec83f1dbfa874e0af0d1 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Wed, 1 Feb 2012 20:41:43 -0800 Subject: mwifiex: handle association failure case correctly Currently even if association is failed "iw link" shows some information about connected BSS and "Tx timeout" error is seen in dmesg log. This patch fixes below issues in the code to handle assoc failure case correctly. 1) "status" variable in mwifiex_wait_queue_complete() is not correctly updated. Hence driver doesn't inform cfg80211 stack about association failure. 2) During association network queues are stopped but carrier is not cleared, which gives Tx timeout error in failure case Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sta_ioctl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 470ca75ec250..b0fbf5d4fea0 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -54,7 +54,7 @@ int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist, int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter) { bool cancel_flag = false; - int status = adapter->cmd_wait_q.status; + int status; struct cmd_ctrl_node *cmd_queued; if (!adapter->cmd_queued) @@ -79,6 +79,8 @@ int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter) mwifiex_cancel_pending_ioctl(adapter); dev_dbg(adapter->dev, "cmd cancel\n"); } + + status = adapter->cmd_wait_q.status; adapter->cmd_wait_q.status = 0; return status; @@ -240,6 +242,8 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, if (!netif_queue_stopped(priv->netdev)) mwifiex_stop_net_dev_queue(priv->netdev, adapter); + if (netif_carrier_ok(priv->netdev)) + netif_carrier_off(priv->netdev); /* Clear any past association response stored for * application retrieval */ @@ -271,6 +275,8 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, if (!netif_queue_stopped(priv->netdev)) mwifiex_stop_net_dev_queue(priv->netdev, adapter); + if (netif_carrier_ok(priv->netdev)) + netif_carrier_off(priv->netdev); if (!ret) { dev_dbg(adapter->dev, "info: network found in scan" -- cgit v1.2.3-55-g7522 From 07445f688218a48bde72316aed9de4fdcc173131 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Thu, 2 Feb 2012 16:29:05 +0530 Subject: ath9k: Fix kernel panic during driver initilization all works need to be initialized before ieee80211_register_hw to prevent mac80211 call backs such as drv_start, drv_config getting started. otherwise we would queue/cancel works before initializing them and it leads to kernel panic. this issue can be recreated with the following script in Chrome laptops with AR928X cards, with background scan running (or) Network manager is running while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done EIP: [<81040a47>] __cancel_work_timer+0xb8/0xe1 SS:ESP 0068:f6be9d70 ---[ end trace 4f86d6139a9900ef ]--- Registered led device: ath9k-phy0 ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf88a0000, irq=16 Kernel panic - not syncing: Fatal exception Pid: 456, comm: wpa_supplicant Tainted: G D 3.0.13 #1 Call Trace: [<81379e21>] panic+0x53/0x14a [<81004a30>] oops_end+0x73/0x81 [<81004b53>] die+0x4c/0x55 [<81002710>] do_trap+0x7c/0x83 [<81002855>] ? do_bounds+0x58/0x58 [<810028cc>] do_invalid_op+0x77/0x81 [<81040a47>] ? __cancel_work_timer+0xb8/0xe1 [<810489ec>] ? sched_clock_cpu+0x81/0x11f [<8103f809>] ? wait_on_work+0xe2/0xf7 [<8137f807>] error_code+0x67/0x6c [<810300d8>] ? wait_consider_task+0x4ba/0x84c [<81040a47>] ? __cancel_work_timer+0xb8/0xe1 [<810380c9>] ? try_to_del_timer_sync+0x5f/0x67 [<81040a91>] cancel_work_sync+0xf/0x11 [] ath_set_channel+0x62/0x25c [ath9k] [] ? ath9k_tx_last_beacon+0x26a/0x85c [ath9k] [] ath_radio_disable+0x3f1/0x68e [ath9k] [] ieee80211_hw_config+0x111/0x116 [mac80211] [] __ieee80211_recalc_idle+0x919/0xa37 [mac80211] [] __ieee80211_recalc_idle+0xa33/0xa37 [mac80211] [<812dbed8>] __dev_open+0x82/0xab Cc: Cc: Gary Morain Cc: Paul Stewart Cc: Vasanthakumar Thiagarajan Tested-by: Mohammed Shafi Shajakhan Signed-off-by: Rajkumar Manoharan Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index abf943557dee..53a005d288aa 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -822,6 +822,11 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, ARRAY_SIZE(ath9k_tpt_blink)); #endif + INIT_WORK(&sc->hw_reset_work, ath_reset_work); + INIT_WORK(&sc->hw_check_work, ath_hw_check); + INIT_WORK(&sc->paprd_work, ath_paprd_calibrate); + INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work); + /* Register with mac80211 */ error = ieee80211_register_hw(hw); if (error) @@ -840,10 +845,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, goto error_world; } - INIT_WORK(&sc->hw_reset_work, ath_reset_work); - INIT_WORK(&sc->hw_check_work, ath_hw_check); - INIT_WORK(&sc->paprd_work, ath_paprd_calibrate); - INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work); sc->last_rssi = ATH_RSSI_DUMMY_MARKER; ath_init_leds(sc); -- cgit v1.2.3-55-g7522 From 90451e6973a5da155c6f315a409ca0a8d3ce6b76 Mon Sep 17 00:00:00 2001 From: Milan Kocian Date: Fri, 3 Feb 2012 14:28:00 +0100 Subject: USB: usbserial: add new PID number (0xa951) to the ftdi driver Signed-off-by: Milan Kocian Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ad654f8208ef..f770415305f8 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -839,6 +839,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index f994503df2dd..6f6058f0db1b 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1187,3 +1187,10 @@ */ /* ZigBee controller */ #define FTDI_RF_R106 0x8A28 + +/* + * Product: HCP HIT GPRS modem + * Manufacturer: HCP d.o.o. + * ATI command output: Cinterion MC55i + */ +#define FTDI_CINTERION_MC55I_PID 0xA951 -- cgit v1.2.3-55-g7522 From e7c9bba7999a8e55efb96d4279c025ca587c5ecd Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Fri, 3 Feb 2012 13:22:10 +0800 Subject: tty: fix a build failure on sparc On sparc, there is a build failure: drivers/tty/serial/8250/8250.c:48:21: error: suncore.h: No such file or directory drivers/tty/serial/8250/8250.c:3275: error: implicit declaration of function 'sunserial_register_minors' drivers/tty/serial/8250/8250.c:3305: error: implicit declaration of function 'sunserial_unregister_minors' this is due to commit 9bef3d4197379a995fa80f81950bbbf8d32e9e8b (serial: group all the 8250 related code together) moved these files into 8250/ subdirectory, but forgot to change the reference to drivers/tty/serial/suncore.h. Cc: Paul Gortmaker Signed-off-by: WANG Cong Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 9f50c4e3c2be..9b7336fcfbb3 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -45,7 +45,7 @@ #include "8250.h" #ifdef CONFIG_SPARC -#include "suncore.h" +#include "../suncore.h" #endif /* -- cgit v1.2.3-55-g7522 From 92618184cb92c5b39d4d8573572d576f9ccb3c28 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Fri, 3 Feb 2012 15:37:15 -0800 Subject: lkdtm: avoid calling lkdtm_do_action() with spinlock held lkdtm_do_action() may call sleeping functions like kmalloc(), so do not call it with spin lock held. Signed-off-by: WANG Cong Cc: Prarit Bhargava Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Reviewed-by: Dave Young Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/lkdtm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c index 150cd7061b80..28adefe70f96 100644 --- a/drivers/misc/lkdtm.c +++ b/drivers/misc/lkdtm.c @@ -354,6 +354,7 @@ static void lkdtm_do_action(enum ctype which) static void lkdtm_handler(void) { unsigned long flags; + bool do_it = false; spin_lock_irqsave(&count_lock, flags); count--; @@ -361,10 +362,13 @@ static void lkdtm_handler(void) cp_name_to_str(cpoint), cp_type_to_str(cptype), count); if (count == 0) { - lkdtm_do_action(cptype); + do_it = true; count = cpoint_count; } spin_unlock_irqrestore(&count_lock, flags); + + if (do_it) + lkdtm_do_action(cptype); } static int lkdtm_register_cpoint(enum cname which) -- cgit v1.2.3-55-g7522 From cbcb8346054073d000ecac324763372d6abd44ac Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Fri, 3 Feb 2012 15:37:15 -0800 Subject: drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer KDFONTOP(GET) currently fails with EIO when being run in a 32bit userland with a 64bit kernel if the font width is not 8. This is because of the setting of the KD_FONT_FLAG_OLD flag, which makes con_font_get return EIO in such case. This flag should *not* be set for KDFONTOP, since it's actually the whole point of this flag (see comment in con_font_set for instance). Signed-off-by: Samuel Thibault Reviewed-by: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: Arthur Taylor Cc: Jiri Slaby Cc: Jiri Olsa Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/tty/vt/vt_ioctl.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 5e096f43bcea..65447c5f91d7 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -1463,7 +1463,6 @@ compat_kdfontop_ioctl(struct compat_console_font_op __user *fontop, if (!perm && op->op != KD_FONT_OP_GET) return -EPERM; op->data = compat_ptr(((struct compat_console_font_op *)op)->data); - op->flags |= KD_FONT_FLAG_OLD; i = con_font_op(vc, op); if (i) return i; -- cgit v1.2.3-55-g7522 From 500823195d0c9eec2a4637484f30cc93ec633d4a Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Thu, 2 Feb 2012 13:54:25 +0200 Subject: Revert "mtd: atmel_nand: optimize read/write buffer functions" This reverts commit fb5427508abbd635e877fabdf55795488119c2d6. The reason is that it breaks 16 bits NAND flash as it was reported by Nikolaus Voss and confirmed by Eric Bénard. Nicolas Ferre alco confirmed: "After double checking with designers, I must admit that I misunderstood the way of optimizing accesses to SMC. 16 bit nand is not so common those days..." Reported-by: Nikolaus Voss Acked-by: Nicolas Ferre Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Cc: stable@kernel.org [3.1+] --- drivers/mtd/nand/atmel_nand.c | 45 +++++++++++++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 4dd056e2e16a..35b4fb55dbd6 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -161,6 +161,37 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) !!host->board->rdy_pin_active_low; } +/* + * Minimal-overhead PIO for data access. + */ +static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + + __raw_readsb(nand_chip->IO_ADDR_R, buf, len); +} + +static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + + __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2); +} + +static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + + __raw_writesb(nand_chip->IO_ADDR_W, buf, len); +} + +static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + + __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2); +} + static void dma_complete_func(void *completion) { complete(completion); @@ -235,27 +266,33 @@ err_buf: static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len) { struct nand_chip *chip = mtd->priv; + struct atmel_nand_host *host = chip->priv; if (use_dma && len > mtd->oobsize) /* only use DMA for bigger than oob size: better performances */ if (atmel_nand_dma_op(mtd, buf, len, 1) == 0) return; - /* if no DMA operation possible, use PIO */ - memcpy_fromio(buf, chip->IO_ADDR_R, len); + if (host->board->bus_width_16) + atmel_read_buf16(mtd, buf, len); + else + atmel_read_buf8(mtd, buf, len); } static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len) { struct nand_chip *chip = mtd->priv; + struct atmel_nand_host *host = chip->priv; if (use_dma && len > mtd->oobsize) /* only use DMA for bigger than oob size: better performances */ if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0) return; - /* if no DMA operation possible, use PIO */ - memcpy_toio(chip->IO_ADDR_W, buf, len); + if (host->board->bus_width_16) + atmel_write_buf16(mtd, buf, len); + else + atmel_write_buf8(mtd, buf, len); } /* -- cgit v1.2.3-55-g7522 From 585c0fd8216e0c9f98e2434092af7ec0f999522d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 27 Jan 2012 05:43:59 -0800 Subject: hwmon: (w83627ehf) Fix number of fans for NCT6776F NCT6776F can select fan input pins for fans 3 to 5 with a secondary set of chip register bits. Check that second set of bits in addition to the first set to detect if fans 3..5 are monitored. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare --- drivers/hwmon/w83627ehf.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 2dfae7d7cc5b..4d383e7e051d 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -1920,9 +1920,26 @@ w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data, fan4min = 0; fan5pin = 0; } else if (sio_data->kind == nct6776) { - fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40); - fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01); - fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02); + bool gpok = superio_inb(sio_data->sioreg, 0x27) & 0x80; + + superio_select(sio_data->sioreg, W83627EHF_LD_HWM); + regval = superio_inb(sio_data->sioreg, SIO_REG_ENABLE); + + if (regval & 0x80) + fan3pin = gpok; + else + fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40); + + if (regval & 0x40) + fan4pin = gpok; + else + fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01); + + if (regval & 0x20) + fan5pin = gpok; + else + fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02); + fan4min = fan4pin; } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { fan3pin = 1; -- cgit v1.2.3-55-g7522 From b530b1930bbd9d005345133f0ff0c556d2a52b19 Mon Sep 17 00:00:00 2001 From: David Lv Date: Sat, 4 Feb 2012 23:22:26 +0000 Subject: via-velocity: S3 resume fix. Initially diagnosed on Ubuntu 11.04 with kernel 2.6.38. velocity_close is not called during a suspend / resume cycle in this driver and it has no business playing directly with power states. Signed-off-by: David Lv Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/via/via-velocity.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index 4128d6b8cc28..cb35b14b73bb 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -2491,9 +2491,6 @@ static int velocity_close(struct net_device *dev) if (dev->irq != 0) free_irq(dev->irq, dev); - /* Power down the chip */ - pci_set_power_state(vptr->pdev, PCI_D3hot); - velocity_free_rings(vptr); vptr->flags &= (~VELOCITY_FLAGS_OPENED); -- cgit v1.2.3-55-g7522 From b1a4874e0d03cb65a1bde950d8f5f2d8743f66ed Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 25 Jan 2012 17:20:59 +0100 Subject: spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4 The spi-s3c64xx driver is also used on Exynos4 so update the dependency to enable build on those platforms. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park [grant.likely: relax depends to ARCH_EXYNOS instead of ARCH_EXYNOS4] Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3f9a47ec67dc..8293658e7cf9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -299,7 +299,7 @@ config SPI_S3C24XX_FIQ config SPI_S3C64XX tristate "Samsung S3C64XX series type SPI" - depends on (ARCH_S3C64XX || ARCH_S5P64X0) + depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS) select S3C64XX_DMA if ARCH_S3C64XX help SPI driver for Samsung S3C64XX and newer SoCs. -- cgit v1.2.3-55-g7522 From c88db233251b026fda775428f0250c760553e216 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Thu, 2 Feb 2012 14:20:30 +0100 Subject: spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver Rename static struct pci_driver pch_spi_pcidev to pch_spi_pcidev_driver to get rid of warnings from modpost checks. Signed-off-by: Danny Kukawka Signed-off-by: Grant Likely --- drivers/spi/spi-topcliff-pch.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 2a6429d8c363..10182eb50068 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1720,7 +1720,7 @@ static int pch_spi_resume(struct pci_dev *pdev) #endif -static struct pci_driver pch_spi_pcidev = { +static struct pci_driver pch_spi_pcidev_driver = { .name = "pch_spi", .id_table = pch_spi_pcidev_id, .probe = pch_spi_probe, @@ -1736,7 +1736,7 @@ static int __init pch_spi_init(void) if (ret) return ret; - ret = pci_register_driver(&pch_spi_pcidev); + ret = pci_register_driver(&pch_spi_pcidev_driver); if (ret) return ret; @@ -1746,7 +1746,7 @@ module_init(pch_spi_init); static void __exit pch_spi_exit(void) { - pci_unregister_driver(&pch_spi_pcidev); + pci_unregister_driver(&pch_spi_pcidev_driver); platform_driver_unregister(&pch_spi_pd_driver); } module_exit(pch_spi_exit); -- cgit v1.2.3-55-g7522 From d7cb3dbd10c09081fafd05fcbef590ce04e402ff Mon Sep 17 00:00:00 2001 From: Przemo Firszt Date: Sun, 5 Feb 2012 22:35:24 +0000 Subject: HID: wacom: Fix invalid power_supply_powers calls power_supply_powers calls added in 35b4c01e2 ("power_supply: add "powers" links to self-powered HID devices") have to be called after power device is created. This patch also fixes the second call - it has to be "ac" instead of "battery" Signed-off-by: Przemo Firszt Signed-off-by: Chris Bagwell Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index b47e58b52d9f..acab74cde727 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -531,7 +531,6 @@ static int wacom_probe(struct hid_device *hdev, wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY; wdata->battery.use_for_apm = 0; - power_supply_powers(&wdata->battery, &hdev->dev); ret = power_supply_register(&hdev->dev, &wdata->battery); if (ret) { @@ -540,6 +539,8 @@ static int wacom_probe(struct hid_device *hdev, goto err_battery; } + power_supply_powers(&wdata->battery, &hdev->dev); + wdata->ac.properties = wacom_ac_props; wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props); wdata->ac.get_property = wacom_ac_get_property; @@ -547,14 +548,14 @@ static int wacom_probe(struct hid_device *hdev, wdata->ac.type = POWER_SUPPLY_TYPE_MAINS; wdata->ac.use_for_apm = 0; - power_supply_powers(&wdata->battery, &hdev->dev); - ret = power_supply_register(&hdev->dev, &wdata->ac); if (ret) { hid_warn(hdev, "can't create ac battery attribute, err: %d\n", ret); goto err_ac; } + + power_supply_powers(&wdata->ac, &hdev->dev); #endif return 0; -- cgit v1.2.3-55-g7522 From 2da8cbf8a6b454296c9db7b57cac72d5a39e3aa7 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 3 Feb 2012 20:34:02 -0800 Subject: mwifiex: add NULL checks in driver unload path If driver load is failed, sometimes few pointers may remain uninitialized ex. priv->wdev, priv->netdev, adapter->sleep_cfm This will cause NULL pointer dereferance while unloading the driver. Signed-off-by: Amitkumar Karwar Signed-off-by: Kiran Divekar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/init.c | 3 ++- drivers/net/wireless/mwifiex/main.c | 12 ++++++++---- 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c index e05b417a3fae..1d0ec57a0143 100644 --- a/drivers/net/wireless/mwifiex/init.c +++ b/drivers/net/wireless/mwifiex/init.c @@ -382,7 +382,8 @@ mwifiex_free_adapter(struct mwifiex_adapter *adapter) adapter->if_ops.cleanup_if(adapter); - dev_kfree_skb_any(adapter->sleep_cfm); + if (adapter->sleep_cfm) + dev_kfree_skb_any(adapter->sleep_cfm); } /* diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index 84be196188cc..b728f54451e4 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -822,7 +822,9 @@ int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem) continue; rtnl_lock(); - mwifiex_del_virtual_intf(priv->wdev->wiphy, priv->netdev); + if (priv->wdev && priv->netdev) + mwifiex_del_virtual_intf(priv->wdev->wiphy, + priv->netdev); rtnl_unlock(); } @@ -830,9 +832,11 @@ int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem) if (!priv) goto exit_remove; - wiphy_unregister(priv->wdev->wiphy); - wiphy_free(priv->wdev->wiphy); - kfree(priv->wdev); + if (priv->wdev) { + wiphy_unregister(priv->wdev->wiphy); + wiphy_free(priv->wdev->wiphy); + kfree(priv->wdev); + } mwifiex_terminate_workqueue(adapter); -- cgit v1.2.3-55-g7522 From f88373fa47f3ce6590fdfaa742d0ddacc2ae017f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 5 Feb 2012 21:15:17 +0100 Subject: ath9k: fix a WEP crypto related regression commit b4a82a0 "ath9k_hw: fix interpretation of the rx KeyMiss flag" fixed the interpretation of the KeyMiss flag for keycache based lookups, however WEP encryption uses a static index, so KeyMiss is always asserted for it, even though frames are decrypted properly. Fix this by clearing the ATH9K_RXERR_KEYMISS flag if no keycache based lookup was performed. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Reported-by: Laurent Bonnans Reported-by: Jurica Vukadin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 0e666fbe0842..7e1a91af1497 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -822,6 +822,14 @@ static bool ath9k_rx_accept(struct ath_common *common, (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC | ATH9K_RXERR_KEYMISS)); + /* + * Key miss events are only relevant for pairwise keys where the + * descriptor does contain a valid key index. This has been observed + * mostly with CCMP encryption. + */ + if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID) + rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS; + if (!rx_stats->rs_datalen) return false; /* -- cgit v1.2.3-55-g7522 From 55a2bb4a6d5e8c7b324d003e130fd9aaf33be4e6 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 5 Feb 2012 21:15:18 +0100 Subject: ath9k_hw: fix a RTS/CTS timeout regression commit adb5066 "ath9k_hw: do not apply the 2.4 ghz ack timeout workaround to cts" reduced the hardware CTS timeout to the normal values specified by the standard, but it turns out while it doesn't need the same extra time that it needs for the ACK timeout, it does need more than the value specified in the standard, but only for 2.4 GHz. This patch brings the CTS timeout value in sync with the initialization values, while still allowing adjustment for bigger distances. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Reported-by: Seth Forshee Reported-by: Marek Lindner Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index ee7759575050..87db1ee1c298 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1037,13 +1037,16 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) /* * Workaround for early ACK timeouts, add an offset to match the - * initval's 64us ack timeout value. + * initval's 64us ack timeout value. Use 48us for the CTS timeout. * This was initially only meant to work around an issue with delayed * BA frames in some implementations, but it has been found to fix ACK * timeout issues in other cases as well. */ - if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) + if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) { acktimeout += 64 - sifstime - ah->slottime; + ctstimeout += 48 - sifstime - ah->slottime; + } + ath9k_hw_set_sifs_time(ah, sifstime); ath9k_hw_setslottime(ah, slottime); -- cgit v1.2.3-55-g7522 From 715252d41912941efb791a7b7bad94d2614dc5c3 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 4 Feb 2012 23:49:40 +0100 Subject: IB/srpt: Don't return freed pointer from srpt_alloc_ioctx_ring() Signed-off-by: Jesper Juhl Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srpt/ib_srpt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index c125614ac256..2b73d43cd691 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -687,6 +687,7 @@ err: while (--i >= 0) srpt_free_ioctx(sdev, ring[i], dma_size, dir); kfree(ring); + ring = NULL; out: return ring; } -- cgit v1.2.3-55-g7522 From f08ad06c05bf58ac38ad7b2fc97b243c12459ff2 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Mon, 6 Feb 2012 06:26:17 +0000 Subject: mlx4_core: fix memory leak at multi_func_cleanup Perform cleanup also in non-master flow. The VFs use communication channel as well. Signed-off-by: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 405e6ac3faf6..eaf09d4f02d0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -1616,12 +1616,12 @@ void mlx4_multi_func_cleanup(struct mlx4_dev *dev) kfree(priv->mfunc.master.slave_state[i].vlan_filter[port]); } kfree(priv->mfunc.master.slave_state); - iounmap(priv->mfunc.comm); - dma_free_coherent(&(dev->pdev->dev), PAGE_SIZE, - priv->mfunc.vhcr, - priv->mfunc.vhcr_dma); - priv->mfunc.vhcr = NULL; } + + iounmap(priv->mfunc.comm); + dma_free_coherent(&(dev->pdev->dev), PAGE_SIZE, + priv->mfunc.vhcr, priv->mfunc.vhcr_dma); + priv->mfunc.vhcr = NULL; } void mlx4_cmd_cleanup(struct mlx4_dev *dev) -- cgit v1.2.3-55-g7522 From 4df99504065fcc75c70cde0aa4a342fb32c829b8 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Mon, 6 Feb 2012 06:26:29 +0000 Subject: mlx4_core: use correct flag for unicast_promisc Use MLX4_DEV_CAP_FLAG_VEP_UC_STEER for unicast_promisc_add/remove Unicast entries were managed in wrong data structures. Signed-off-by: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mcg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index 0785d9b2a265..00794cb38935 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -1004,7 +1004,7 @@ EXPORT_SYMBOL_GPL(mlx4_multicast_promisc_remove); int mlx4_unicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port) { - if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_MC_STEER)) + if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER)) return 0; if (mlx4_is_mfunc(dev)) @@ -1016,7 +1016,7 @@ EXPORT_SYMBOL_GPL(mlx4_unicast_promisc_add); int mlx4_unicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port) { - if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_MC_STEER)) + if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER)) return 0; if (mlx4_is_mfunc(dev)) -- cgit v1.2.3-55-g7522 From 4c41b3673759d096106e68bce586f103c51d4119 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Mon, 6 Feb 2012 06:26:36 +0000 Subject: mlx4_core: use correct port for steering Use port number for correct steering (list per port). Before the fix all steering entries (for both physical ports) were managed in first port structures, so we had leakage of resources for port 2. Signed-off-by: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mcg.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index 00794cb38935..ca574d850b39 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -136,7 +136,7 @@ static int new_steering_entry(struct mlx4_dev *dev, u8 port, u32 prot; int err; - s_steer = &mlx4_priv(dev)->steer[0]; + s_steer = &mlx4_priv(dev)->steer[port - 1]; new_entry = kzalloc(sizeof *new_entry, GFP_KERNEL); if (!new_entry) return -ENOMEM; @@ -220,7 +220,7 @@ static int existing_steering_entry(struct mlx4_dev *dev, u8 port, struct mlx4_promisc_qp *pqp; struct mlx4_promisc_qp *dqp; - s_steer = &mlx4_priv(dev)->steer[0]; + s_steer = &mlx4_priv(dev)->steer[port - 1]; pqp = get_promisc_qp(dev, 0, steer, qpn); if (!pqp) @@ -265,7 +265,7 @@ static bool check_duplicate_entry(struct mlx4_dev *dev, u8 port, struct mlx4_steer_index *tmp_entry, *entry = NULL; struct mlx4_promisc_qp *dqp, *tmp_dqp; - s_steer = &mlx4_priv(dev)->steer[0]; + s_steer = &mlx4_priv(dev)->steer[port - 1]; /* if qp is not promisc, it cannot be duplicated */ if (!get_promisc_qp(dev, 0, steer, qpn)) @@ -306,7 +306,7 @@ static bool can_remove_steering_entry(struct mlx4_dev *dev, u8 port, bool ret = false; int i; - s_steer = &mlx4_priv(dev)->steer[0]; + s_steer = &mlx4_priv(dev)->steer[port - 1]; mailbox = mlx4_alloc_cmd_mailbox(dev); if (IS_ERR(mailbox)) @@ -361,7 +361,7 @@ static int add_promisc_qp(struct mlx4_dev *dev, u8 port, int err; struct mlx4_priv *priv = mlx4_priv(dev); - s_steer = &mlx4_priv(dev)->steer[0]; + s_steer = &mlx4_priv(dev)->steer[port - 1]; mutex_lock(&priv->mcg_table.mutex); @@ -466,7 +466,7 @@ static int remove_promisc_qp(struct mlx4_dev *dev, u8 port, int loc, i; int err; - s_steer = &mlx4_priv(dev)->steer[0]; + s_steer = &mlx4_priv(dev)->steer[port - 1]; mutex_lock(&priv->mcg_table.mutex); pqp = get_promisc_qp(dev, 0, steer, qpn); -- cgit v1.2.3-55-g7522 From 2e6b411971de727a5bcea4323331fdaa70a81b11 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 31 Jan 2012 14:22:15 -0500 Subject: bcma: don't fail for bad SPROM CRC The brcmsmac driver is now using the bcma SPROM CRC check, which does not recognize all chipsets that were functional prior to the switch. In particular, the current code bails out on odd CRC errors in recent Macbooks. This patch ignores those errors, with the argument that an unrecognized SPROM should be treated similarly to a non-existing one. Signed-off-by: Henrik Rydberg Signed-off-by: John W. Linville --- drivers/bcma/main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index febbc0a1222a..ec31f7dd5549 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -169,10 +169,8 @@ int bcma_bus_register(struct bcma_bus *bus) err = bcma_sprom_get(bus); if (err == -ENOENT) { pr_err("No SPROM available\n"); - } else if (err) { + } else if (err) pr_err("Failed to get SPROM: %d\n", err); - return -ENOENT; - } /* Register found cores */ bcma_register_cores(bus); -- cgit v1.2.3-55-g7522 From 68355f71132bec25e0d89b2d8d3ed01286307d31 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 6 Feb 2012 08:39:49 +0000 Subject: mlx4: allow device removal by fixing dma unmap size After opening the network interface, Mellanox ConnectX device cannot be removed by hotplug because it has not properly unmapped all DMA memory. It happens that mlx4_en_activate_rx_rings overrides the variable that keeps the size of the memory mapped. This is fixed by passing to mlx4_en_destroy_rx_ring the same size that is given to mlx4_en_create_rx_ring. After applying this patch, hot unplugging the device works after opening the interface. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 ++- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 3 ++- 3 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 467ae5824875..149e60da0a32 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -892,7 +892,8 @@ void mlx4_en_free_resources(struct mlx4_en_priv *priv) for (i = 0; i < priv->rx_ring_num; i++) { if (priv->rx_ring[i].rx_info) - mlx4_en_destroy_rx_ring(priv, &priv->rx_ring[i]); + mlx4_en_destroy_rx_ring(priv, &priv->rx_ring[i], + priv->prof->rx_ring_size, priv->stride); if (priv->rx_cq[i].buf) mlx4_en_destroy_cq(priv, &priv->rx_cq[i]); } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 971d4b6b8dfe..d1c631e8293a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -380,12 +380,12 @@ err_allocator: } void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv, - struct mlx4_en_rx_ring *ring) + struct mlx4_en_rx_ring *ring, u32 size, u16 stride) { struct mlx4_en_dev *mdev = priv->mdev; mlx4_en_unmap_buffer(&ring->wqres.buf); - mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size + TXBB_SIZE); + mlx4_free_hwq_res(mdev->dev, &ring->wqres, size * stride + TXBB_SIZE); vfree(ring->rx_info); ring->rx_info = NULL; } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 35f08840813c..d60335f3c473 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -528,7 +528,8 @@ int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv, struct mlx4_en_rx_ring *ring, u32 size, u16 stride); void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv, - struct mlx4_en_rx_ring *ring); + struct mlx4_en_rx_ring *ring, + u32 size, u16 stride); int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv); void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv, struct mlx4_en_rx_ring *ring); -- cgit v1.2.3-55-g7522 From 7e2eb99cc6207e4464f018f72c67c55f2b1c93a4 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 6 Feb 2012 08:39:50 +0000 Subject: mlx4: fix DMA mapping leak when allocation fails mlx4_en_prepare_rx_desc does not correctly clean up after it finds an allocation failure. It should unmap a page before calling put_page, but it only calls the later. This bug would prevent a device removal using hotplug after setting the device MTU to 9000 and opening the network interface. After the fix, we still see the allocation failure with MTU 9000, but we are able to remove the device. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index d1c631e8293a..d4ad8c226b51 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -168,8 +168,12 @@ static int mlx4_en_prepare_rx_desc(struct mlx4_en_priv *priv, return 0; err: - while (i--) + while (i--) { + dma_addr_t dma = be64_to_cpu(rx_desc->data[i].addr); + pci_unmap_single(priv->mdev->pdev, dma, skb_frags[i].size, + PCI_DMA_FROMDEVICE); put_page(skb_frags[i].page); + } return -ENOMEM; } -- cgit v1.2.3-55-g7522 From c898261c0dad617f0f1080bedc02d507a2fcfb92 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 25 Jan 2012 08:16:25 -0800 Subject: drm/i915: Force explicit bpp selection for intel_dp_link_required It is never correct to use intel_crtc->bpp in intel_dp_link_required, so instead pass an explicit bpp in to this function. This patch only supports 18bpp and 24bpp modes, which means that 10bpc modes will be computed incorrectly. Fixing that will require more extensive changes, and so must be addressed separately from this bugfix. intel_dp_link_required is called from intel_dp_mode_valid and intel_dp_mode_fixup. * intel_dp_mode_valid is called to list supported modes; in this case, the current crtc values cannot be relevant as the modes in question may never be selected. Thus, using intel_crtc->bpp is never right. * intel_dp_mode_fixup is called during mode setting, but it is run well before ironlake_crtc_mode_set is called to set intel_crtc->bpp, so using intel_crtc-bpp in this path can only ever get a stale value. Cc: Lubos Kolouch Cc: Adam Jackson Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42263 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44881 Tested-by: Dave Airlie Tested-by: camalot@picnicpark.org (Dell Latitude 6510) Tested-by: Roland Dreier Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_dp.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index db3b461ad412..94f860cce3f7 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -208,17 +208,8 @@ intel_dp_link_clock(uint8_t link_bw) */ static int -intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock, int check_bpp) +intel_dp_link_required(int pixel_clock, int bpp) { - struct drm_crtc *crtc = intel_dp->base.base.crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int bpp = 24; - - if (check_bpp) - bpp = check_bpp; - else if (intel_crtc) - bpp = intel_crtc->bpp; - return (pixel_clock * bpp + 9) / 10; } @@ -245,12 +236,11 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_PANEL; } - mode_rate = intel_dp_link_required(intel_dp, mode->clock, 0); + mode_rate = intel_dp_link_required(mode->clock, 24); max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); if (mode_rate > max_rate) { - mode_rate = intel_dp_link_required(intel_dp, - mode->clock, 18); + mode_rate = intel_dp_link_required(mode->clock, 18); if (mode_rate > max_rate) return MODE_CLOCK_HIGH; else @@ -683,7 +673,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, int lane_count, clock; int max_lane_count = intel_dp_max_lane_count(intel_dp); int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; - int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 0; + int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24; static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { @@ -701,7 +691,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); - if (intel_dp_link_required(intel_dp, mode->clock, bpp) + if (intel_dp_link_required(mode->clock, bpp) <= link_avail) { intel_dp->link_bw = bws[clock]; intel_dp->lane_count = lane_count; -- cgit v1.2.3-55-g7522 From db91ff55bdf06736b849afc1b1fce5763bbb8d5d Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 7 Feb 2012 12:01:51 +1100 Subject: md: two small fixes to handling interrupt resync. 1/ If a resync is aborted we should record how far we got (recovery_cp) the last request that we know has completed (->curr_resync_completed) rather than the last request that was submitted (->curr_resync). 2/ When a resync aborts we still want to update the metadata with any changes, so set MD_CHANGE_DEVS even if we 'skip'. Signed-off-by: NeilBrown --- drivers/md/md.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 33aa06f12b87..81d1c43dd97f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7333,7 +7333,8 @@ void md_do_sync(struct mddev *mddev) printk(KERN_INFO "md: checkpointing %s of %s.\n", desc, mdname(mddev)); - mddev->recovery_cp = mddev->curr_resync; + mddev->recovery_cp = + mddev->curr_resync_completed; } } else mddev->recovery_cp = MaxSector; @@ -7351,9 +7352,9 @@ void md_do_sync(struct mddev *mddev) rcu_read_unlock(); } } + skip: set_bit(MD_CHANGE_DEVS, &mddev->flags); - skip: if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { /* We completed so min/max setting can be forgotten if used. */ if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) -- cgit v1.2.3-55-g7522 From 95fe1ee41e23fa271416da67483594dde74bc6ca Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 18 Jan 2012 14:04:29 +0100 Subject: target: accept REQUEST_SENSE with 18bytes WindowsXP+BOT issues a MODE_SENSE request with page 0x1c which is not suppoerted by target. Target rejects that command with TCM_INVALID_CDB_FIELD, so far so good. On BOT I can't send the SENSE response back, instead I can only reply that an error occured. The next thing happens is a REQUEST_SENSE request with 18 bytes length. Since the check here is more than 18 bytes I have to NACK that request as well. This is not really required: We check for some additional room, but we never use it. The additional length is set to 0xa so the total length is 0xa + 8 = 18 which is fine with my 18 bytes. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index a9bbf5a5cc27..f3d71fa88a28 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -1058,11 +1058,8 @@ int target_emulate_request_sense(struct se_task *task) */ buf[0] = 0x70; buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; - /* - * Make sure request data length is enough for additional - * sense data. - */ - if (cmd->data_length <= 18) { + + if (cmd->data_length < 18) { buf[7] = 0x00; err = -EINVAL; goto end; @@ -1079,11 +1076,8 @@ int target_emulate_request_sense(struct se_task *task) */ buf[0] = 0x70; buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE; - /* - * Make sure request data length is enough for additional - * sense data. - */ - if (cmd->data_length <= 18) { + + if (cmd->data_length < 18) { buf[7] = 0x00; err = -EINVAL; goto end; -- cgit v1.2.3-55-g7522 From 1edcdb497ef418122cd4f98e157660cf594b345a Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Thu, 19 Jan 2012 13:39:23 -0800 Subject: target: Change target_submit_cmd() to return void Retval not very useful, and may even be harmful. Once submitted, fabrics should expect a sense error if anything goes wrong. All fabrics checking of this retval are useless or broken: fc checks it just to emit more debug output. ib_srpt trickles retval up, then it is ignored. qla2xxx trickles it up, which then causes a bug because the abort goto in qla_target.c thinks cmd hasn't been sent to target. Just returning nothing is best. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 5 ++--- drivers/target/tcm_fc/tfc_cmd.c | 9 ++------- include/target/target_core_fabric.h | 2 +- 3 files changed, 5 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index cf996d81cfcb..aace7ee141f3 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1657,7 +1657,7 @@ EXPORT_SYMBOL(transport_handle_cdb_direct); * This may only be called from process context, and also currently * assumes internal allocation of fabric payload buffer by target-core. **/ -int target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess, +void target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess, unsigned char *cdb, unsigned char *sense, u32 unpacked_lun, u32 data_length, int task_attr, int data_dir, int flags) { @@ -1706,12 +1706,11 @@ int target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess, * when fabric has filled the incoming buffer. */ transport_handle_cdb_direct(se_cmd); - return 0; + return; out_check_cond: transport_send_check_condition_and_sense(se_cmd, se_cmd->scsi_sense_reason, 0); - return 0; } EXPORT_SYMBOL(target_submit_cmd); diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index addc18f727ea..9e7e26c74c79 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -540,7 +540,6 @@ static void ft_send_work(struct work_struct *work) int data_dir = 0; u32 data_len; int task_attr; - int ret; fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp)); if (!fcp) @@ -603,14 +602,10 @@ static void ft_send_work(struct work_struct *work) * Use a single se_cmd->cmd_kref as we expect to release se_cmd * directly from ft_check_stop_free callback in response path. */ - ret = target_submit_cmd(&cmd->se_cmd, cmd->sess->se_sess, cmd->cdb, + target_submit_cmd(&cmd->se_cmd, cmd->sess->se_sess, cmd->cdb, &cmd->ft_sense_buffer[0], cmd->lun, data_len, task_attr, data_dir, 0); - pr_debug("r_ctl %x alloc target_submit_cmd %d\n", fh->fh_r_ctl, ret); - if (ret < 0) { - ft_dump_cmd(cmd, __func__); - return; - } + pr_debug("r_ctl %x alloc target_submit_cmd\n", fh->fh_r_ctl); return; err: diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 523e8bc104d4..d36fad317e78 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -114,7 +114,7 @@ void transport_init_se_cmd(struct se_cmd *, struct target_core_fabric_ops *, struct se_session *, u32, int, int, unsigned char *); int transport_lookup_cmd_lun(struct se_cmd *, u32); int transport_generic_allocate_tasks(struct se_cmd *, unsigned char *); -int target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *, +void target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *, unsigned char *, u32, u32, int, int, int); int transport_handle_cdb_direct(struct se_cmd *); int transport_generic_handle_cdb_map(struct se_cmd *); -- cgit v1.2.3-55-g7522 From 735703cac08f34a197e1c6331ca9adc8a52d6046 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 20 Jan 2012 19:02:56 -0800 Subject: target: Fix target_submit_cmd() exception handling This patch fixes a bug in target_submit_cmd() where the failure path for transport_generic_allocate_tasks() made a direct call to transport_send_check_condition_and_sense() and not calling the final target_put_sess_cmd() release callback. For transport_generic_allocate_tasks() failures, use the proper call to transport_generic_request_failure() to handle kref_put() along with potential internal queue full response processing. It also makes transport_lookup_cmd_lun() failures in target_submit_cmd() use transport_send_check_condition_and_sense() and target_put_sess_cmd() directly to avoid se_cmd->se_dev reference in transport_generic_request_failure() handling. Finally it drops the out_check_cond: label and use direct reference for allocate task failures, and per-se_device queue_full handling is currently not supported for transport_lookup_cmd_lun() failure descriptors due to se_device dependency. Reported-by: Roland Dreier Cc: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index aace7ee141f3..799b5efcd382 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1690,15 +1690,21 @@ void target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess, /* * Locate se_lun pointer and attach it to struct se_cmd */ - if (transport_lookup_cmd_lun(se_cmd, unpacked_lun) < 0) - goto out_check_cond; + if (transport_lookup_cmd_lun(se_cmd, unpacked_lun) < 0) { + transport_send_check_condition_and_sense(se_cmd, + se_cmd->scsi_sense_reason, 0); + target_put_sess_cmd(se_sess, se_cmd); + return; + } /* * Sanitize CDBs via transport_generic_cmd_sequencer() and * allocate the necessary tasks to complete the received CDB+data */ rc = transport_generic_allocate_tasks(se_cmd, cdb); - if (rc != 0) - goto out_check_cond; + if (rc != 0) { + transport_generic_request_failure(se_cmd); + return; + } /* * Dispatch se_cmd descriptor to se_lun->lun_se_dev backend * for immediate execution of READs, otherwise wait for @@ -1707,10 +1713,6 @@ void target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess, */ transport_handle_cdb_direct(se_cmd); return; - -out_check_cond: - transport_send_check_condition_and_sense(se_cmd, - se_cmd->scsi_sense_reason, 0); } EXPORT_SYMBOL(target_submit_cmd); -- cgit v1.2.3-55-g7522 From 7347b5ff7090b2b399b7921a266255cd55bbd78f Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Fri, 20 Jan 2012 15:49:27 -0800 Subject: target: Fix iblock se_dev_attrib.unmap_granularity The block layer keeps q->limits.discard_granularity in bytes, but iblock (and the SCSI Block Limits VPD page) keep unmap_granularity in blocks. Report the correct value when exporting block devices by dividing to convert bytes to blocks. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_iblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 628e877381d8..d43d5eb5ed20 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -181,7 +181,7 @@ static struct se_device *iblock_create_virtdevice( */ dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count = 1; dev->se_sub_dev->se_dev_attrib.unmap_granularity = - q->limits.discard_granularity; + q->limits.discard_granularity >> 9; dev->se_sub_dev->se_dev_attrib.unmap_granularity_alignment = q->limits.discard_alignment; -- cgit v1.2.3-55-g7522 From c3bc93da24c8f315d9ece741f6e6414a38879ec6 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 23 Jan 2012 11:39:49 +1100 Subject: iscsi_target: in_aton needs linux/inet.h Fixes this error after a recent nfs cleanup: drivers/target/iscsi/iscsi_target_configfs.c: In function 'lio_target_call_addnptotpg': drivers/target/iscsi/iscsi_target_configfs.c:214:3: error: implicit declaration of function 'in6_pton' [-Werror=implicit-function-declaration] drivers/target/iscsi/iscsi_target_configfs.c:239:3: error: implicit declaration of function 'in_aton' [-Werror=implicit-function-declaration] Signed-off-by: Stephen Rothwell Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_configfs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index 3468caab47a2..6b35b37988ed 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3-55-g7522 From 3011684c0b0b77b0f88113ef1c15b18befc6734a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 27 Jan 2012 15:50:55 +0300 Subject: target: handle empty string writes in sysfs These are root only and we're not likely to hit the problem in practise, but it makes the static checkers happy. Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_configfs.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 0955bb8979fb..6e043eeb1db9 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -1704,13 +1704,15 @@ static ssize_t target_core_store_dev_alias( return -EINVAL; } - se_dev->su_dev_flags |= SDF_USING_ALIAS; read_bytes = snprintf(&se_dev->se_dev_alias[0], SE_DEV_ALIAS_LEN, "%s", page); - + if (!read_bytes) + return -EINVAL; if (se_dev->se_dev_alias[read_bytes - 1] == '\n') se_dev->se_dev_alias[read_bytes - 1] = '\0'; + se_dev->su_dev_flags |= SDF_USING_ALIAS; + pr_debug("Target_Core_ConfigFS: %s/%s set alias: %s\n", config_item_name(&hba->hba_group.cg_item), config_item_name(&se_dev->se_dev_group.cg_item), @@ -1753,13 +1755,15 @@ static ssize_t target_core_store_dev_udev_path( return -EINVAL; } - se_dev->su_dev_flags |= SDF_USING_UDEV_PATH; read_bytes = snprintf(&se_dev->se_dev_udev_path[0], SE_UDEV_PATH_LEN, "%s", page); - + if (!read_bytes) + return -EINVAL; if (se_dev->se_dev_udev_path[read_bytes - 1] == '\n') se_dev->se_dev_udev_path[read_bytes - 1] = '\0'; + se_dev->su_dev_flags |= SDF_USING_UDEV_PATH; + pr_debug("Target_Core_ConfigFS: %s/%s set udev_path: %s\n", config_item_name(&hba->hba_group.cg_item), config_item_name(&se_dev->se_dev_group.cg_item), -- cgit v1.2.3-55-g7522 From 5c55125f4794f4e77574fc09839cb47b0eb45b06 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 2 Feb 2012 16:51:24 -0500 Subject: iblock: fix handling of large requests Requesting to many bvecs upsets bio_alloc_bioset, so limit the number we ask for to the amount it can handle. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_iblock.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index d43d5eb5ed20..8572eae62da7 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -488,6 +488,13 @@ iblock_get_bio(struct se_task *task, sector_t lba, u32 sg_num) struct iblock_req *ib_req = IBLOCK_REQ(task); struct bio *bio; + /* + * Only allocate as many vector entries as the bio code allows us to, + * we'll loop later on until we have handled the whole request. + */ + if (sg_num > BIO_MAX_PAGES) + sg_num = BIO_MAX_PAGES; + bio = bio_alloc_bioset(GFP_NOIO, sg_num, ib_dev->ibd_bio_set); if (!bio) { pr_err("Unable to allocate memory for bio\n"); -- cgit v1.2.3-55-g7522 From 9f9ef6d3c08319defc29e4cf6ef2868d15ed0cc3 Mon Sep 17 00:00:00 2001 From: Dax Kelson Date: Fri, 3 Feb 2012 23:40:25 -0700 Subject: iscsi: use IP_FREEBIND socket option Use IP_FREEBIND socket option so that iscsi portal configuration with explicit IP addresses can happen during boot, before network interfaces have been assigned IPs. This is especially important on systemd based Linux boxes where system boot happens asynchronously and non-trivial configuration must be done to get targetcli.service to start synchronously after the network is configured. Reference: http://lists.fedoraproject.org/pipermail/devel/2011-October/158025.html Signed-off-by: Dax Kelson Cc: "Nicholas A. Bellinger" Cc: "Andy Grover" Cc: "Lennart Poettering" Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_login.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index ec47a7c5966e..38cb7ce8469e 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -842,6 +842,14 @@ int iscsi_target_setup_login_socket( goto fail; } + ret = kernel_setsockopt(sock, IPPROTO_IP, IP_FREEBIND, + (char *)&opt, sizeof(opt)); + if (ret < 0) { + pr_err("kernel_setsockopt() for IP_FREEBIND" + " failed\n"); + goto fail; + } + ret = kernel_bind(sock, (struct sockaddr *)&np->np_sockaddr, len); if (ret < 0) { pr_err("kernel_bind() failed: %d\n", ret); -- cgit v1.2.3-55-g7522 From 67236c44741e250199ccd77f1115568e68cf8848 Mon Sep 17 00:00:00 2001 From: Martin Svec Date: Mon, 6 Feb 2012 22:13:25 -0800 Subject: target: Fix unsupported WRITE_SAME sense payload This patch fixes a bug in target-core where unsupported WRITE_SAME ops from a target_check_write_same_discard() failure was incorrectly returning CHECK_CONDITION w/ TCM_INVALID_CDB_FIELD sense data. This was causing some clients to not properly fall back, so go ahead and use the correct TCM_UNSUPPORTED_SCSI_OPCODE sense for this case. Reported-by: Martin Svec Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 799b5efcd382..58cea07b12fb 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2697,7 +2697,7 @@ static int transport_generic_cmd_sequencer( cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; if (target_check_write_same_discard(&cdb[10], dev) < 0) - goto out_invalid_cdb_field; + goto out_unsupported_cdb; if (!passthrough) cmd->execute_task = target_emulate_write_same; break; @@ -2980,7 +2980,7 @@ static int transport_generic_cmd_sequencer( cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; if (target_check_write_same_discard(&cdb[1], dev) < 0) - goto out_invalid_cdb_field; + goto out_unsupported_cdb; if (!passthrough) cmd->execute_task = target_emulate_write_same; break; @@ -3003,7 +3003,7 @@ static int transport_generic_cmd_sequencer( * of byte 1 bit 3 UNMAP instead of original reserved field */ if (target_check_write_same_discard(&cdb[1], dev) < 0) - goto out_invalid_cdb_field; + goto out_unsupported_cdb; if (!passthrough) cmd->execute_task = target_emulate_write_same; break; -- cgit v1.2.3-55-g7522 From 217c8b2b1978aa4a02ce040a99c59ed3b6418fe5 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 7 Feb 2012 13:40:56 +0100 Subject: HID: wiimote: fix invalid power_supply_powers call Analogically to d7cb3dbd1 ("HID: wacom: Fix invalid power_supply_powers calls"), fix also the same occurence in wiimote driver. Reported-by: przemo@firszt.eu Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-wiimote-core.c b/drivers/hid/hid-wiimote-core.c index fc253b472f9d..cac3589b1ed5 100644 --- a/drivers/hid/hid-wiimote-core.c +++ b/drivers/hid/hid-wiimote-core.c @@ -1226,14 +1226,14 @@ static int wiimote_hid_probe(struct hid_device *hdev, wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY; wdata->battery.use_for_apm = 0; - power_supply_powers(&wdata->battery, &hdev->dev); - ret = power_supply_register(&wdata->hdev->dev, &wdata->battery); if (ret) { hid_err(hdev, "Cannot register battery device\n"); goto err_battery; } + power_supply_powers(&wdata->battery, &hdev->dev); + ret = wiimote_leds_create(wdata); if (ret) goto err_free; -- cgit v1.2.3-55-g7522 From aadf1f0fc851d71095d2773bcda73e1423e6b730 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 6 Feb 2012 15:04:23 +0000 Subject: Revert "skge: check for PCI dma mapping errors" As reported by several people... The code in rx_clean was panic'ing so revert commit d0249e44432aa0ffcf710b64449b8eaa3722547e. Will redo DMA mapping checks as new patches for a later release. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 71 +++++++------------------------------ 1 file changed, 13 insertions(+), 58 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index edb9bda55d55..33947ac595c0 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -931,20 +931,17 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u32 base) } /* Allocate and setup a new buffer for receiving */ -static int skge_rx_setup(struct pci_dev *pdev, - struct skge_element *e, - struct sk_buff *skb, unsigned int bufsize) +static void skge_rx_setup(struct skge_port *skge, struct skge_element *e, + struct sk_buff *skb, unsigned int bufsize) { struct skge_rx_desc *rd = e->desc; - dma_addr_t map; + u64 map; - map = pci_map_single(pdev, skb->data, bufsize, + map = pci_map_single(skge->hw->pdev, skb->data, bufsize, PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(pdev, map)) - goto mapping_error; - rd->dma_lo = lower_32_bits(map); - rd->dma_hi = upper_32_bits(map); + rd->dma_lo = map; + rd->dma_hi = map >> 32; e->skb = skb; rd->csum1_start = ETH_HLEN; rd->csum2_start = ETH_HLEN; @@ -956,13 +953,6 @@ static int skge_rx_setup(struct pci_dev *pdev, rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize; dma_unmap_addr_set(e, mapaddr, map); dma_unmap_len_set(e, maplen, bufsize); - return 0; - -mapping_error: - if (net_ratelimit()) - dev_warn(&pdev->dev, "%s: rx mapping error\n", - skb->dev->name); - return -EIO; } /* Resume receiving using existing skb, @@ -1024,11 +1014,7 @@ static int skge_rx_fill(struct net_device *dev) return -ENOMEM; skb_reserve(skb, NET_IP_ALIGN); - if (skge_rx_setup(skge->hw->pdev, e, skb, skge->rx_buf_size)) { - kfree_skb(skb); - return -ENOMEM; - } - + skge_rx_setup(skge, e, skb, skge->rx_buf_size); } while ((e = e->next) != ring->start); ring->to_clean = ring->start; @@ -2743,7 +2729,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, struct skge_tx_desc *td; int i; u32 control, len; - dma_addr_t map; + u64 map; if (skb_padto(skb, ETH_ZLEN)) return NETDEV_TX_OK; @@ -2757,14 +2743,11 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, e->skb = skb; len = skb_headlen(skb); map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(hw->pdev, map)) - goto mapping_error; - dma_unmap_addr_set(e, mapaddr, map); dma_unmap_len_set(e, maplen, len); - td->dma_lo = lower_32_bits(map); - td->dma_hi = upper_32_bits(map); + td->dma_lo = map; + td->dma_hi = map >> 32; if (skb->ip_summed == CHECKSUM_PARTIAL) { const int offset = skb_checksum_start_offset(skb); @@ -2795,16 +2778,14 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, map = skb_frag_dma_map(&hw->pdev->dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE); - if (dma_mapping_error(&hw->pdev->dev, map)) - goto mapping_unwind; e = e->next; e->skb = skb; tf = e->desc; BUG_ON(tf->control & BMU_OWN); - tf->dma_lo = lower_32_bits(map); - tf->dma_hi = upper_32_bits(map); + tf->dma_lo = map; + tf->dma_hi = (u64) map >> 32; dma_unmap_addr_set(e, mapaddr, map); dma_unmap_len_set(e, maplen, skb_frag_size(frag)); @@ -2834,28 +2815,6 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, } return NETDEV_TX_OK; - -mapping_unwind: - /* unroll any pages that were already mapped. */ - if (e != skge->tx_ring.to_use) { - struct skge_element *u; - - for (u = skge->tx_ring.to_use->next; u != e; u = u->next) - pci_unmap_page(hw->pdev, dma_unmap_addr(u, mapaddr), - dma_unmap_len(u, maplen), - PCI_DMA_TODEVICE); - e = skge->tx_ring.to_use; - } - /* undo the mapping for the skb header */ - pci_unmap_single(hw->pdev, dma_unmap_addr(e, mapaddr), - dma_unmap_len(e, maplen), - PCI_DMA_TODEVICE); -mapping_error: - /* mapping error causes error message and packet to be discarded. */ - if (net_ratelimit()) - dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name); - dev_kfree_skb(skb); - return NETDEV_TX_OK; } @@ -3099,17 +3058,13 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, if (!nskb) goto resubmit; - if (unlikely(skge_rx_setup(skge->hw->pdev, e, nskb, skge->rx_buf_size))) { - dev_kfree_skb(nskb); - goto resubmit; - } - pci_unmap_single(skge->hw->pdev, dma_unmap_addr(e, mapaddr), dma_unmap_len(e, maplen), PCI_DMA_FROMDEVICE); skb = e->skb; prefetch(skb->data); + skge_rx_setup(skge, e, nskb, skge->rx_buf_size); } skb_put(skb, len); -- cgit v1.2.3-55-g7522 From da0912868527913eba15f5ebcfb420b32a037f1a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 4 Feb 2012 20:31:39 +0000 Subject: CONFIG_TR/CONFIG_LLC: work around the problem with select As it is, with PCI/ISA/MCA/CCW all set to n and PCMCIA set to m setting TR to y will set LLC to m, with very unpleasant results - net/802/psnap gets picked into obj-y, resulting in the kernel that won't link - psnap calls functions from llc. The cause, AFAICS, is that kconfig gets rev_dep for LLC containing || TR && (deps for TR) and even though TR is boolean, both LLC and PCMCIA are tristate and that thing becomes || y && (n || m), i.e. || m. The reason for dependency on PCMCIA is that when none of PCI, ISA, MCA, CCW or PCMCIA is set there'll be no tokenring drivers, so there's no point building tokenring core. Proper fix probably belongs in kconfig (we need strict and, such that y m would be y, so that rev_deps added for tristate selected by bool would use that instead of &&; we'd have || TR (deps for TR) in this case), but it's a rather intrusive change. There's an easy workaround in case of TR -> LLC select, namely to have a def_bool y symbol sitting under if TR and have that symbol selecting LLC. Kudos to johill for suggesting that one... Signed-off-by: Al Viro Signed-off-by: David S. Miller --- drivers/net/tokenring/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig index c7e0149d1514..45550d42b368 100644 --- a/drivers/net/tokenring/Kconfig +++ b/drivers/net/tokenring/Kconfig @@ -7,7 +7,6 @@ menuconfig TR bool "Token Ring driver support" depends on NETDEVICES && !UML depends on (PCI || ISA || MCA || CCW || PCMCIA) - select LLC help Token Ring is IBM's way of communication on a local network; the rest of the world uses Ethernet. To participate on a Token Ring @@ -20,6 +19,10 @@ menuconfig TR if TR +config WANT_LLC + def_bool y + select LLC + config PCMCIA_IBMTR tristate "IBM PCMCIA tokenring adapter support" depends on IBMTR!=y && PCMCIA -- cgit v1.2.3-55-g7522 From 3f61cd879c2f112c468e8849949b6fc88c739679 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 6 Feb 2012 11:28:21 +0000 Subject: bnx2x: Fix mem leak in bnx2x_tpa_stop() if build_skb() fails. We allocate memory for 'new_data' with kmalloc(). If we get the memory we then try to build_skb() and if that should fail (which it can) we do not enter 'if (likely(skb)) {' and actually use 'new_data' but instead fall through to the 'drop:' label and end up returning from the function without ever assigning 'new'data' to anything or freeing it. That leaks the memory allocated to 'new_data'. This patch fixes the memory leak by doing a kfree(new_data) in the case where build_skb() fails (or where allocation of 'new_data' itself fails, but in taht case it's just a harmless kfree(NULL)). Signed-off-by: Jesper Juhl Acked-by: Eric Dumazet Acked-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 03f3935fd8c2..7aee46983be4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -523,7 +523,6 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, skb = build_skb(data); if (likely(skb)) { - #ifdef BNX2X_STOP_ON_ERROR if (pad + len > fp->rx_buf_size) { BNX2X_ERR("skb_put is about to fail... " @@ -557,7 +556,7 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, return; } - + kfree(new_data); drop: /* drop the packet and keep the buffer in the bin */ DP(NETIF_MSG_RX_STATUS, -- cgit v1.2.3-55-g7522 From fdb37a7f84a58ccad24abffd54ad46d23b763e13 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 6 Feb 2012 23:55:15 +0000 Subject: net: sh_eth: fix skb_over_panic happen When this GETHER controller received a large frame (about 1800 bytes or more), skb_over_panic() happened. This is because the previous driver set the RFLR to 0x1000 (4096 bytes) and the skb allocate size is smaller than 4096 bytes. So, the controller accepted such a frame. The controller can discard a large frame by the RFLR setting. So, the patch modifies the value of RFLR to mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN. Signed-off-by: Yoshihiro Shimoda Cc: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 4 +++- drivers/net/ethernet/renesas/sh_eth.h | 3 --- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 813d41c4a845..87b650131774 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include "sh_eth.h" @@ -817,7 +818,8 @@ static int sh_eth_dev_init(struct net_device *ndev) sh_eth_write(ndev, 0, TRIMD); /* Recv frame limit set register */ - sh_eth_write(ndev, RFLR_VALUE, RFLR); + sh_eth_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN, + RFLR); sh_eth_write(ndev, sh_eth_read(ndev, EESR), EESR); sh_eth_write(ndev, mdp->cd->eesipr_value, EESIPR); diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index 47877b13ffad..cdbd844662a7 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -575,9 +575,6 @@ enum RPADIR_BIT { RPADIR_PADR = 0x0003f, }; -/* RFLR */ -#define RFLR_VALUE 0x1000 - /* FDR */ #define DEFAULT_FDR_INIT 0x00000707 -- cgit v1.2.3-55-g7522 From a1728800bed3b93b231d99e97c756f622b9991c2 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 6 Feb 2012 14:51:03 +0000 Subject: net: enable TC35815 for MIPS again 8<---------------------------------------------------------------------- From: Ralf Roesch Date: Wed, 16 Nov 2011 09:33:50 +0100 Subject: [PATCH] net: enable TC35815 for MIPS again TX493[8,9] MIPS SoCs support 2 Ethernet channels of type TC35815 which are connected to the internal PCI controller. And JMR3927 MIPS board has a TC35815 chip on board. These dependencies were lost on movement to drivers/net/ethernet/toshiba. Signed-off-by: Ralf Roesch Signed-off-by: Atsushi Nemoto CC: stable@vger.kernel.org [3.2+] Signed-off-by: David S. Miller --- drivers/net/ethernet/toshiba/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig index 051764704559..74acb5cf6099 100644 --- a/drivers/net/ethernet/toshiba/Kconfig +++ b/drivers/net/ethernet/toshiba/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_TOSHIBA bool "Toshiba devices" default y - depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3 + depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB || MIPS) || PPC_PS3 ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from -- cgit v1.2.3-55-g7522 From e81a7bd55531a77d8c16d44766db4089c2983f1b Mon Sep 17 00:00:00 2001 From: Tomas Vanek Date: Sun, 5 Feb 2012 15:51:53 +0200 Subject: zd1211rw: firmware needs duration_id set to zero for non-pspoll frames Some devices (iwl5100) cannot connect to zd1211rw based AP. It appears that zd1211 firmware messes up duration_id field if it is not set to zero by driver. Sniffing traffic shows that zd1211 is transmitting frames with duration_id bits 14 and 15 set and other bits appearing random. Setting duration_id at driver to zero results zd1211 outputting sane duration_id. This means that firmware is setting correct values itself and expects duration_id to be zero in first place. Looking at vendor driver shows that only PSPoll frames have duration_id set by driver, for other frames duration_id left zero. Original bug-report and attached patch at: http://sourceforge.net/mailarchive/message.php?msg_id=28759111 Reported-by: Tomas Vanek [modified original patch from bug-report, added check for pspoll frame] Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 0a70149df3fc..98a574a4a465 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -866,6 +866,14 @@ static int fill_ctrlset(struct zd_mac *mac, ZD_ASSERT(frag_len <= 0xffff); + /* + * Firmware computes the duration itself (for all frames except PSPoll) + * and needs the field set to 0 at input, otherwise firmware messes up + * duration_id and sets bits 14 and 15 on. + */ + if (!ieee80211_is_pspoll(hdr->frame_control)) + hdr->duration_id = 0; + txrate = ieee80211_get_tx_rate(mac->hw, info); cs->modulation = txrate->hw_value; -- cgit v1.2.3-55-g7522 From 59c1204d464075fcb5d02e7daa6b23782dd4a088 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 7 Feb 2012 08:20:37 -0800 Subject: ACPI: remove duplicated lines of merging problems with acpi_processor_add Those lines have two copies. Signed-off-by: Yinghai Lu Cc: Thomas Renninger Signed-off-by: Linus Torvalds --- drivers/acpi/processor_driver.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 2b805d7ef317..8ae05ce18500 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -579,13 +579,6 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) goto err_free_cpumask; } - /* - * Do not start hotplugged CPUs now, but when they - * are onlined the first time - */ - if (pr->flags.need_hotplug_init) - return 0; - /* * Do not start hotplugged CPUs now, but when they * are onlined the first time -- cgit v1.2.3-55-g7522 From e57b6886f555ab57f40a01713304e2053efe51ec Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 8 Feb 2012 16:42:52 +0100 Subject: drm/i915: no lvds quirk for AOpen MP45 According to a bug report, it doesn't have one. Cc: stable@kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263 Acked-by: Chris Wilson Signed-Off-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 798f6e1aa544..aa84832b0e1a 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -692,6 +692,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "AOpen i45GMx-I", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"), + DMI_MATCH(DMI_BOARD_NAME, "i45GMx-I"), + }, + }, { .callback = intel_no_lvds_dmi_callback, .ident = "Aopen i945GTt-VFA", -- cgit v1.2.3-55-g7522 From 617cf884810b44384fe8e9431e9babeb80a2ff37 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 8 Feb 2012 13:53:38 -0800 Subject: drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2) An identical patch has been merged for i9xx_crtc_mode_set: Commit 59df7b1771c150163e522f33c638096ab0efbf42 Author: Christian Schmidt Date: Mon Dec 19 20:03:33 2011 +0100 drm/intel: Fix initialization if startup happens in interlaced mode [v2] But that one neglected to fix up the ironlake+ path. This should fix the issue reported by Alfonso Fiore where booting with only a HDMI cable connected to his TV failed to display anything. The issue is that the bios set up things for 1080i and used the pannel fitter to scale up the lower progressive resolutions. We failed to clear the interlace bit in the PIPEACONF register, resulting in havoc. v2: Be more paranoid and just unconditionally clear the field before setting new values. Cc: Peter Ross Cc: Alfonso Fiore Signed-Off-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f1744aada98f..00fbff5ddd81 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5307,6 +5307,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, } } + pipeconf &= ~PIPECONF_INTERLACE_MASK; if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; /* the chip adds 2 halflines automatically */ @@ -5317,7 +5318,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, adjusted_mode->crtc_vsync_end -= 1; adjusted_mode->crtc_vsync_start -= 1; } else - pipeconf &= ~PIPECONF_INTERLACE_MASK; /* progressive */ + pipeconf |= PIPECONF_PROGRESSIVE; I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) | @@ -5902,6 +5903,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, } } + pipeconf &= ~PIPECONF_INTERLACE_MASK; if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; /* the chip adds 2 halflines automatically */ @@ -5912,7 +5914,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, adjusted_mode->crtc_vsync_end -= 1; adjusted_mode->crtc_vsync_start -= 1; } else - pipeconf &= ~PIPECONF_INTERLACE_MASK; /* progressive */ + pipeconf |= PIPECONF_PROGRESSIVE; I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) | -- cgit v1.2.3-55-g7522 From b7cdd9e6323af368e26121c5b791eddc78e79fea Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 30 Jan 2012 14:12:59 -0800 Subject: staging: delete gma500 driver It's now "properly" merged into the DRM tree in the kernel, so delete the staging version of the driver as it is far obsolete and broken. Requested-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/gma500/Kconfig | 33 - drivers/staging/gma500/Makefile | 52 - drivers/staging/gma500/TODO | 15 - drivers/staging/gma500/accel_2d.c | 414 ------- drivers/staging/gma500/backlight.c | 49 - drivers/staging/gma500/cdv_device.c | 350 ------ drivers/staging/gma500/cdv_device.h | 36 - drivers/staging/gma500/cdv_intel_crt.c | 326 ------ drivers/staging/gma500/cdv_intel_display.c | 1508 ------------------------- drivers/staging/gma500/cdv_intel_hdmi.c | 376 ------ drivers/staging/gma500/cdv_intel_lvds.c | 721 ------------ drivers/staging/gma500/displays/hdmi.h | 33 - drivers/staging/gma500/displays/pyr_cmd.h | 34 - drivers/staging/gma500/displays/pyr_vid.h | 34 - drivers/staging/gma500/displays/tmd_cmd.h | 34 - drivers/staging/gma500/displays/tmd_vid.h | 34 - drivers/staging/gma500/displays/tpo_cmd.h | 35 - drivers/staging/gma500/displays/tpo_vid.h | 33 - drivers/staging/gma500/framebuffer.c | 856 -------------- drivers/staging/gma500/framebuffer.h | 48 - drivers/staging/gma500/gem.c | 292 ----- drivers/staging/gma500/gem_glue.c | 89 -- drivers/staging/gma500/gem_glue.h | 2 - drivers/staging/gma500/gtt.c | 553 --------- drivers/staging/gma500/gtt.h | 64 -- drivers/staging/gma500/intel_bios.c | 303 ----- drivers/staging/gma500/intel_bios.h | 430 ------- drivers/staging/gma500/intel_i2c.c | 170 --- drivers/staging/gma500/intel_opregion.c | 81 -- drivers/staging/gma500/mdfld_device.c | 714 ------------ drivers/staging/gma500/mdfld_dsi_dbi.c | 761 ------------- drivers/staging/gma500/mdfld_dsi_dbi.h | 173 --- drivers/staging/gma500/mdfld_dsi_dbi_dpu.c | 778 ------------- drivers/staging/gma500/mdfld_dsi_dbi_dpu.h | 154 --- drivers/staging/gma500/mdfld_dsi_dpi.c | 805 ------------- drivers/staging/gma500/mdfld_dsi_dpi.h | 78 -- drivers/staging/gma500/mdfld_dsi_output.c | 1014 ----------------- drivers/staging/gma500/mdfld_dsi_output.h | 138 --- drivers/staging/gma500/mdfld_dsi_pkg_sender.c | 1484 ------------------------ drivers/staging/gma500/mdfld_dsi_pkg_sender.h | 184 --- drivers/staging/gma500/mdfld_intel_display.c | 1404 ----------------------- drivers/staging/gma500/mdfld_msic.h | 31 - drivers/staging/gma500/mdfld_output.c | 171 --- drivers/staging/gma500/mdfld_output.h | 41 - drivers/staging/gma500/mdfld_pyr_cmd.c | 558 --------- drivers/staging/gma500/mdfld_tmd_vid.c | 206 ---- drivers/staging/gma500/mdfld_tpo_cmd.c | 509 --------- drivers/staging/gma500/mdfld_tpo_vid.c | 140 --- drivers/staging/gma500/medfield.h | 268 ----- drivers/staging/gma500/mid_bios.c | 270 ----- drivers/staging/gma500/mid_bios.h | 21 - drivers/staging/gma500/mmu.c | 858 -------------- drivers/staging/gma500/mrst.h | 252 ----- drivers/staging/gma500/mrst_crtc.c | 604 ---------- drivers/staging/gma500/mrst_device.c | 634 ----------- drivers/staging/gma500/mrst_hdmi.c | 852 -------------- drivers/staging/gma500/mrst_hdmi_i2c.c | 328 ------ drivers/staging/gma500/mrst_lvds.c | 407 ------- drivers/staging/gma500/power.c | 318 ------ drivers/staging/gma500/power.h | 67 -- drivers/staging/gma500/psb_device.c | 321 ------ drivers/staging/gma500/psb_drm.h | 219 ---- drivers/staging/gma500/psb_drv.c | 1230 -------------------- drivers/staging/gma500/psb_drv.h | 952 ---------------- drivers/staging/gma500/psb_intel_display.c | 1429 ----------------------- drivers/staging/gma500/psb_intel_display.h | 28 - drivers/staging/gma500/psb_intel_drv.h | 230 ---- drivers/staging/gma500/psb_intel_lvds.c | 854 -------------- drivers/staging/gma500/psb_intel_modes.c | 77 -- drivers/staging/gma500/psb_intel_reg.h | 1235 -------------------- drivers/staging/gma500/psb_intel_sdvo.c | 1293 --------------------- drivers/staging/gma500/psb_intel_sdvo_regs.h | 338 ------ drivers/staging/gma500/psb_irq.c | 627 ---------- drivers/staging/gma500/psb_irq.h | 45 - drivers/staging/gma500/psb_lid.c | 88 -- drivers/staging/gma500/psb_reg.h | 582 ---------- 78 files changed, 30778 deletions(-) delete mode 100644 drivers/staging/gma500/Kconfig delete mode 100644 drivers/staging/gma500/Makefile delete mode 100644 drivers/staging/gma500/TODO delete mode 100644 drivers/staging/gma500/accel_2d.c delete mode 100644 drivers/staging/gma500/backlight.c delete mode 100644 drivers/staging/gma500/cdv_device.c delete mode 100644 drivers/staging/gma500/cdv_device.h delete mode 100644 drivers/staging/gma500/cdv_intel_crt.c delete mode 100644 drivers/staging/gma500/cdv_intel_display.c delete mode 100644 drivers/staging/gma500/cdv_intel_hdmi.c delete mode 100644 drivers/staging/gma500/cdv_intel_lvds.c delete mode 100644 drivers/staging/gma500/displays/hdmi.h delete mode 100644 drivers/staging/gma500/displays/pyr_cmd.h delete mode 100644 drivers/staging/gma500/displays/pyr_vid.h delete mode 100644 drivers/staging/gma500/displays/tmd_cmd.h delete mode 100644 drivers/staging/gma500/displays/tmd_vid.h delete mode 100644 drivers/staging/gma500/displays/tpo_cmd.h delete mode 100644 drivers/staging/gma500/displays/tpo_vid.h delete mode 100644 drivers/staging/gma500/framebuffer.c delete mode 100644 drivers/staging/gma500/framebuffer.h delete mode 100644 drivers/staging/gma500/gem.c delete mode 100644 drivers/staging/gma500/gem_glue.c delete mode 100644 drivers/staging/gma500/gem_glue.h delete mode 100644 drivers/staging/gma500/gtt.c delete mode 100644 drivers/staging/gma500/gtt.h delete mode 100644 drivers/staging/gma500/intel_bios.c delete mode 100644 drivers/staging/gma500/intel_bios.h delete mode 100644 drivers/staging/gma500/intel_i2c.c delete mode 100644 drivers/staging/gma500/intel_opregion.c delete mode 100644 drivers/staging/gma500/mdfld_device.c delete mode 100644 drivers/staging/gma500/mdfld_dsi_dbi.c delete mode 100644 drivers/staging/gma500/mdfld_dsi_dbi.h delete mode 100644 drivers/staging/gma500/mdfld_dsi_dbi_dpu.c delete mode 100644 drivers/staging/gma500/mdfld_dsi_dbi_dpu.h delete mode 100644 drivers/staging/gma500/mdfld_dsi_dpi.c delete mode 100644 drivers/staging/gma500/mdfld_dsi_dpi.h delete mode 100644 drivers/staging/gma500/mdfld_dsi_output.c delete mode 100644 drivers/staging/gma500/mdfld_dsi_output.h delete mode 100644 drivers/staging/gma500/mdfld_dsi_pkg_sender.c delete mode 100644 drivers/staging/gma500/mdfld_dsi_pkg_sender.h delete mode 100644 drivers/staging/gma500/mdfld_intel_display.c delete mode 100644 drivers/staging/gma500/mdfld_msic.h delete mode 100644 drivers/staging/gma500/mdfld_output.c delete mode 100644 drivers/staging/gma500/mdfld_output.h delete mode 100644 drivers/staging/gma500/mdfld_pyr_cmd.c delete mode 100644 drivers/staging/gma500/mdfld_tmd_vid.c delete mode 100644 drivers/staging/gma500/mdfld_tpo_cmd.c delete mode 100644 drivers/staging/gma500/mdfld_tpo_vid.c delete mode 100644 drivers/staging/gma500/medfield.h delete mode 100644 drivers/staging/gma500/mid_bios.c delete mode 100644 drivers/staging/gma500/mid_bios.h delete mode 100644 drivers/staging/gma500/mmu.c delete mode 100644 drivers/staging/gma500/mrst.h delete mode 100644 drivers/staging/gma500/mrst_crtc.c delete mode 100644 drivers/staging/gma500/mrst_device.c delete mode 100644 drivers/staging/gma500/mrst_hdmi.c delete mode 100644 drivers/staging/gma500/mrst_hdmi_i2c.c delete mode 100644 drivers/staging/gma500/mrst_lvds.c delete mode 100644 drivers/staging/gma500/power.c delete mode 100644 drivers/staging/gma500/power.h delete mode 100644 drivers/staging/gma500/psb_device.c delete mode 100644 drivers/staging/gma500/psb_drm.h delete mode 100644 drivers/staging/gma500/psb_drv.c delete mode 100644 drivers/staging/gma500/psb_drv.h delete mode 100644 drivers/staging/gma500/psb_intel_display.c delete mode 100644 drivers/staging/gma500/psb_intel_display.h delete mode 100644 drivers/staging/gma500/psb_intel_drv.h delete mode 100644 drivers/staging/gma500/psb_intel_lvds.c delete mode 100644 drivers/staging/gma500/psb_intel_modes.c delete mode 100644 drivers/staging/gma500/psb_intel_reg.h delete mode 100644 drivers/staging/gma500/psb_intel_sdvo.c delete mode 100644 drivers/staging/gma500/psb_intel_sdvo_regs.h delete mode 100644 drivers/staging/gma500/psb_irq.c delete mode 100644 drivers/staging/gma500/psb_irq.h delete mode 100644 drivers/staging/gma500/psb_lid.c delete mode 100644 drivers/staging/gma500/psb_reg.h (limited to 'drivers') diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 21e2f4b87f14..b31194c8272d 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -120,8 +120,6 @@ source "drivers/staging/cptm1217/Kconfig" source "drivers/staging/ste_rmi4/Kconfig" -source "drivers/staging/gma500/Kconfig" - source "drivers/staging/mei/Kconfig" source "drivers/staging/nvec/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 7c5808d7212d..b5813c46378d 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -52,7 +52,6 @@ obj-$(CONFIG_FT1000) += ft1000/ obj-$(CONFIG_SPEAKUP) += speakup/ obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217) += cptm1217/ obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += ste_rmi4/ -obj-$(CONFIG_DRM_PSB) += gma500/ obj-$(CONFIG_INTEL_MEI) += mei/ obj-$(CONFIG_MFD_NVEC) += nvec/ obj-$(CONFIG_DRM_OMAP) += omapdrm/ diff --git a/drivers/staging/gma500/Kconfig b/drivers/staging/gma500/Kconfig deleted file mode 100644 index c7a2b3bc0a18..000000000000 --- a/drivers/staging/gma500/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -config DRM_PSB - tristate "Intel GMA5/600 KMS Framebuffer" - depends on DRM && PCI && X86 && BROKEN - select FB_CFB_COPYAREA - select FB_CFB_FILLRECT - select FB_CFB_IMAGEBLIT - select DRM_KMS_HELPER - select DRM_TTM - help - Say yes for an experimental 2D KMS framebuffer driver for the - Intel GMA500 ('Poulsbo') and other Intel IMG based graphics - devices. - -config DRM_PSB_MRST - bool "Intel GMA600 support (Experimental)" - depends on DRM_PSB - help - Say yes to include support for GMA600 (Intel Moorestown/Oaktrail) - platforms with LVDS ports. HDMI and MIPI are not currently - supported. - -config DRM_PSB_MFLD - bool "Intel Medfield support (Experimental)" - depends on DRM_PSB - help - Say yes to include support for Intel Medfield platforms with MIPI - interfaces. - -config DRM_PSB_CDV - bool "Intel Cedarview support (Experimental)" - depends on DRM_PSB - help - Say yes to include support for Intel Cedarview platforms diff --git a/drivers/staging/gma500/Makefile b/drivers/staging/gma500/Makefile deleted file mode 100644 index c729868b1b10..000000000000 --- a/drivers/staging/gma500/Makefile +++ /dev/null @@ -1,52 +0,0 @@ -# -# KMS driver for the GMA500 -# -ccflags-y += -Iinclude/drm - -psb_gfx-y += gem_glue.o \ - accel_2d.o \ - backlight.o \ - framebuffer.o \ - gem.o \ - gtt.o \ - intel_bios.o \ - intel_i2c.o \ - intel_opregion.o \ - mmu.o \ - power.o \ - psb_drv.o \ - psb_intel_display.o \ - psb_intel_lvds.o \ - psb_intel_modes.o \ - psb_intel_sdvo.o \ - psb_lid.o \ - psb_irq.o \ - psb_device.o \ - mid_bios.o - -psb_gfx-$(CONFIG_DRM_PSB_CDV) += cdv_device.o \ - cdv_intel_crt.o \ - cdv_intel_display.o \ - cdv_intel_hdmi.o \ - cdv_intel_lvds.o - -psb_gfx-$(CONFIG_DRM_PSB_MRST) += mrst_device.o \ - mrst_crtc.o \ - mrst_lvds.o \ - mrst_hdmi.o \ - mrst_hdmi_i2c.o - -psb_gfx-$(CONFIG_DRM_PSB_MFLD) += mdfld_device.o \ - mdfld_output.o \ - mdfld_pyr_cmd.o \ - mdfld_tmd_vid.o \ - mdfld_tpo_cmd.o \ - mdfld_tpo_vid.o \ - mdfld_dsi_pkg_sender.o \ - mdfld_dsi_dpi.o \ - mdfld_dsi_output.o \ - mdfld_dsi_dbi.o \ - mdfld_dsi_dbi_dpu.o \ - mdfld_intel_display.o - -obj-$(CONFIG_DRM_PSB) += psb_gfx.o diff --git a/drivers/staging/gma500/TODO b/drivers/staging/gma500/TODO deleted file mode 100644 index fc836158e74c..000000000000 --- a/drivers/staging/gma500/TODO +++ /dev/null @@ -1,15 +0,0 @@ -- Sort out the power management side. Not important for Poulsbo but - matters for Moorestown/Medfield -- Debug Oaktrail/Moorestown support (single pipe, no BIOS on mrst, - some other differences) -- Add 2D acceleration via console and DRM -- Add scrolling acceleration using the GTT to do remapping on the main - framebuffer. -- HDMI testing -- Oaktrail HDMI and other features -- Oaktrail MIPI -- Medfield needs a lot of further love - -As per kernel policy and the in the interest of the safety of various -kittens there is no support or plans to add hooks for the closed user space -stuff. diff --git a/drivers/staging/gma500/accel_2d.c b/drivers/staging/gma500/accel_2d.c deleted file mode 100644 index b8f78ebbb145..000000000000 --- a/drivers/staging/gma500/accel_2d.c +++ /dev/null @@ -1,414 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007-2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to - * develop this driver. - * - **************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "psb_drv.h" -#include "psb_reg.h" -#include "framebuffer.h" - -/** - * psb_spank - reset the 2D engine - * @dev_priv: our PSB DRM device - * - * Soft reset the graphics engine and then reload the necessary registers. - * We use this at initialisation time but it will become relevant for - * accelerated X later - */ -void psb_spank(struct drm_psb_private *dev_priv) -{ - PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET | - _PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET | - _PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET | - _PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET); - PSB_RSGX32(PSB_CR_SOFT_RESET); - - msleep(1); - - PSB_WSGX32(0, PSB_CR_SOFT_RESET); - wmb(); - PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT, - PSB_CR_BIF_CTRL); - wmb(); - (void) PSB_RSGX32(PSB_CR_BIF_CTRL); - - msleep(1); - PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT, - PSB_CR_BIF_CTRL); - (void) PSB_RSGX32(PSB_CR_BIF_CTRL); - PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE); -} - -/** - * psb2_2d_wait_available - wait for FIFO room - * @dev_priv: our DRM device - * @size: size (in dwords) of the command we want to issue - * - * Wait until there is room to load the FIFO with our data. If the - * device is not responding then reset it - */ -static int psb_2d_wait_available(struct drm_psb_private *dev_priv, - unsigned size) -{ - uint32_t avail = PSB_RSGX32(PSB_CR_2D_SOCIF); - unsigned long t = jiffies + HZ; - - while (avail < size) { - avail = PSB_RSGX32(PSB_CR_2D_SOCIF); - if (time_after(jiffies, t)) { - psb_spank(dev_priv); - return -EIO; - } - } - return 0; -} - -/** - * psb_2d_submit - submit a 2D command - * @dev_priv: our DRM device - * @cmdbuf: command to issue - * @size: length (in dwords) - * - * Issue one or more 2D commands to the accelerator. This needs to be - * serialized later when we add the GEM interfaces for acceleration - */ -static int psbfb_2d_submit(struct drm_psb_private *dev_priv, uint32_t *cmdbuf, - unsigned size) -{ - int ret = 0; - int i; - unsigned submit_size; - unsigned long flags; - - spin_lock_irqsave(&dev_priv->lock_2d, flags); - while (size > 0) { - submit_size = (size < 0x60) ? size : 0x60; - size -= submit_size; - ret = psb_2d_wait_available(dev_priv, submit_size); - if (ret) - break; - - submit_size <<= 2; - - for (i = 0; i < submit_size; i += 4) - PSB_WSGX32(*cmdbuf++, PSB_SGX_2D_SLAVE_PORT + i); - - (void)PSB_RSGX32(PSB_SGX_2D_SLAVE_PORT + i - 4); - } - spin_unlock_irqrestore(&dev_priv->lock_2d, flags); - return ret; -} - - -/** - * psb_accel_2d_copy_direction - compute blit order - * @xdir: X direction of move - * @ydir: Y direction of move - * - * Compute the correct order setings to ensure that an overlapping blit - * correctly copies all the pixels. - */ -static u32 psb_accel_2d_copy_direction(int xdir, int ydir) -{ - if (xdir < 0) - return (ydir < 0) ? PSB_2D_COPYORDER_BR2TL : - PSB_2D_COPYORDER_TR2BL; - else - return (ydir < 0) ? PSB_2D_COPYORDER_BL2TR : - PSB_2D_COPYORDER_TL2BR; -} - -/** - * psb_accel_2d_copy - accelerated 2D copy - * @dev_priv: our DRM device - * @src_offset in bytes - * @src_stride in bytes - * @src_format psb 2D format defines - * @dst_offset in bytes - * @dst_stride in bytes - * @dst_format psb 2D format defines - * @src_x offset in pixels - * @src_y offset in pixels - * @dst_x offset in pixels - * @dst_y offset in pixels - * @size_x of the copied area - * @size_y of the copied area - * - * Format and issue a 2D accelerated copy command. - */ -static int psb_accel_2d_copy(struct drm_psb_private *dev_priv, - uint32_t src_offset, uint32_t src_stride, - uint32_t src_format, uint32_t dst_offset, - uint32_t dst_stride, uint32_t dst_format, - uint16_t src_x, uint16_t src_y, - uint16_t dst_x, uint16_t dst_y, - uint16_t size_x, uint16_t size_y) -{ - uint32_t blit_cmd; - uint32_t buffer[10]; - uint32_t *buf; - uint32_t direction; - - buf = buffer; - - direction = - psb_accel_2d_copy_direction(src_x - dst_x, src_y - dst_y); - - if (direction == PSB_2D_COPYORDER_BR2TL || - direction == PSB_2D_COPYORDER_TR2BL) { - src_x += size_x - 1; - dst_x += size_x - 1; - } - if (direction == PSB_2D_COPYORDER_BR2TL || - direction == PSB_2D_COPYORDER_BL2TR) { - src_y += size_y - 1; - dst_y += size_y - 1; - } - - blit_cmd = - PSB_2D_BLIT_BH | - PSB_2D_ROT_NONE | - PSB_2D_DSTCK_DISABLE | - PSB_2D_SRCCK_DISABLE | - PSB_2D_USE_PAT | PSB_2D_ROP3_SRCCOPY | direction; - - *buf++ = PSB_2D_FENCE_BH; - *buf++ = - PSB_2D_DST_SURF_BH | dst_format | (dst_stride << - PSB_2D_DST_STRIDE_SHIFT); - *buf++ = dst_offset; - *buf++ = - PSB_2D_SRC_SURF_BH | src_format | (src_stride << - PSB_2D_SRC_STRIDE_SHIFT); - *buf++ = src_offset; - *buf++ = - PSB_2D_SRC_OFF_BH | (src_x << PSB_2D_SRCOFF_XSTART_SHIFT) | - (src_y << PSB_2D_SRCOFF_YSTART_SHIFT); - *buf++ = blit_cmd; - *buf++ = - (dst_x << PSB_2D_DST_XSTART_SHIFT) | (dst_y << - PSB_2D_DST_YSTART_SHIFT); - *buf++ = - (size_x << PSB_2D_DST_XSIZE_SHIFT) | (size_y << - PSB_2D_DST_YSIZE_SHIFT); - *buf++ = PSB_2D_FLUSH_BH; - - return psbfb_2d_submit(dev_priv, buffer, buf - buffer); -} - -/** - * psbfb_copyarea_accel - copyarea acceleration for /dev/fb - * @info: our framebuffer - * @a: copyarea parameters from the framebuffer core - * - * Perform a 2D copy via the accelerator - */ -static void psbfb_copyarea_accel(struct fb_info *info, - const struct fb_copyarea *a) -{ - struct psb_fbdev *fbdev = info->par; - struct psb_framebuffer *psbfb = &fbdev->pfb; - struct drm_device *dev = psbfb->base.dev; - struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb; - struct drm_psb_private *dev_priv = dev->dev_private; - uint32_t offset; - uint32_t stride; - uint32_t src_format; - uint32_t dst_format; - - if (!fb) - return; - - offset = psbfb->gtt->offset; - stride = fb->pitches[0]; - - switch (fb->depth) { - case 8: - src_format = PSB_2D_SRC_332RGB; - dst_format = PSB_2D_DST_332RGB; - break; - case 15: - src_format = PSB_2D_SRC_555RGB; - dst_format = PSB_2D_DST_555RGB; - break; - case 16: - src_format = PSB_2D_SRC_565RGB; - dst_format = PSB_2D_DST_565RGB; - break; - case 24: - case 32: - /* this is wrong but since we don't do blending its okay */ - src_format = PSB_2D_SRC_8888ARGB; - dst_format = PSB_2D_DST_8888ARGB; - break; - default: - /* software fallback */ - cfb_copyarea(info, a); - return; - } - - if (!gma_power_begin(dev, false)) { - cfb_copyarea(info, a); - return; - } - psb_accel_2d_copy(dev_priv, - offset, stride, src_format, - offset, stride, dst_format, - a->sx, a->sy, a->dx, a->dy, a->width, a->height); - gma_power_end(dev); -} - -/** - * psbfb_copyarea - 2D copy interface - * @info: our framebuffer - * @region: region to copy - * - * Copy an area of the framebuffer console either by the accelerator - * or directly using the cfb helpers according to the request - */ -void psbfb_copyarea(struct fb_info *info, - const struct fb_copyarea *region) -{ - if (unlikely(info->state != FBINFO_STATE_RUNNING)) - return; - - /* Avoid the 8 pixel erratum */ - if (region->width == 8 || region->height == 8 || - (info->flags & FBINFO_HWACCEL_DISABLED)) - return cfb_copyarea(info, region); - - psbfb_copyarea_accel(info, region); -} - -/** - * psbfb_sync - synchronize 2D - * @info: our framebuffer - * - * Wait for the 2D engine to quiesce so that we can do CPU - * access to the framebuffer again - */ -int psbfb_sync(struct fb_info *info) -{ - struct psb_fbdev *fbdev = info->par; - struct psb_framebuffer *psbfb = &fbdev->pfb; - struct drm_device *dev = psbfb->base.dev; - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long _end = jiffies + DRM_HZ; - int busy = 0; - unsigned long flags; - - spin_lock_irqsave(&dev_priv->lock_2d, flags); - /* - * First idle the 2D engine. - */ - - if ((PSB_RSGX32(PSB_CR_2D_SOCIF) == _PSB_C2_SOCIF_EMPTY) && - ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & _PSB_C2B_STATUS_BUSY) == 0)) - goto out; - - do { - busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY); - cpu_relax(); - } while (busy && !time_after_eq(jiffies, _end)); - - if (busy) - busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY); - if (busy) - goto out; - - do { - busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & - _PSB_C2B_STATUS_BUSY) != 0); - cpu_relax(); - } while (busy && !time_after_eq(jiffies, _end)); - if (busy) - busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & - _PSB_C2B_STATUS_BUSY) != 0); - -out: - spin_unlock_irqrestore(&dev_priv->lock_2d, flags); - return (busy) ? -EBUSY : 0; -} - -int psb_accel_ioctl(struct drm_device *dev, void *data, struct drm_file *file) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_psb_2d_op *op = data; - u32 *op_ptr = &op->cmd[0]; - int i; - struct drm_gem_object *obj; - struct gtt_range *gtt; - int err = -EINVAL; - - if (!dev_priv->ops->accel_2d) - return -EOPNOTSUPP; - if (op->size > PSB_2D_OP_BUFLEN) - return -EINVAL; - - /* The GEM object being used. We need to support separate src/dst/etc - in the end but for now keep them all the same */ - obj = drm_gem_object_lookup(dev, file, op->src); - if (obj == NULL) - return -ENOENT; - gtt = container_of(obj, struct gtt_range, gem); - - if (psb_gtt_pin(gtt) < 0) - goto bad_2; - for (i = 0; i < op->size; i++, op_ptr++) { - u32 r = *op_ptr & 0xF0000000; - /* Fill in the GTT offsets for the command buffer */ - if (r == PSB_2D_SRC_SURF_BH || - r == PSB_2D_DST_SURF_BH || - r == PSB_2D_MASK_SURF_BH || - r == PSB_2D_PAT_SURF_BH) { - i++; - op_ptr++; - if (i == op->size) - goto bad; - if (*op_ptr) - goto bad; - *op_ptr = gtt->offset; - continue; - } - } - psbfb_2d_submit(dev_priv, op->cmd, op->size); - err = 0; -bad: - psb_gtt_unpin(gtt); -bad_2: - drm_gem_object_unreference(obj); - return err; -} diff --git a/drivers/staging/gma500/backlight.c b/drivers/staging/gma500/backlight.c deleted file mode 100644 index 20793951fcac..000000000000 --- a/drivers/staging/gma500/backlight.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * GMA500 Backlight Interface - * - * Copyright (c) 2009-2011, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: Eric Knopp - * - */ - -#include "psb_drv.h" -#include "psb_intel_reg.h" -#include "psb_intel_drv.h" -#include "intel_bios.h" -#include "power.h" - -int gma_backlight_init(struct drm_device *dev) -{ -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - struct drm_psb_private *dev_priv = dev->dev_private; - return dev_priv->ops->backlight_init(dev); -#else - return 0; -#endif -} - -void gma_backlight_exit(struct drm_device *dev) -{ -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - struct drm_psb_private *dev_priv = dev->dev_private; - if (dev_priv->backlight_device) { - dev_priv->backlight_device->props.brightness = 0; - backlight_update_status(dev_priv->backlight_device); - backlight_device_unregister(dev_priv->backlight_device); - } -#endif -} diff --git a/drivers/staging/gma500/cdv_device.c b/drivers/staging/gma500/cdv_device.c deleted file mode 100644 index 8ec10caab13e..000000000000 --- a/drivers/staging/gma500/cdv_device.c +++ /dev/null @@ -1,350 +0,0 @@ -/************************************************************************** - * Copyright (c) 2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#include -#include -#include -#include "psb_drm.h" -#include "psb_drv.h" -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include "intel_bios.h" -#include "cdv_device.h" - -#define VGA_SR_INDEX 0x3c4 -#define VGA_SR_DATA 0x3c5 - -static void cdv_disable_vga(struct drm_device *dev) -{ - u8 sr1; - u32 vga_reg; - - vga_reg = VGACNTRL; - - outb(1, VGA_SR_INDEX); - sr1 = inb(VGA_SR_DATA); - outb(sr1 | 1<<5, VGA_SR_DATA); - udelay(300); - - REG_WRITE(vga_reg, VGA_DISP_DISABLE); - REG_READ(vga_reg); -} - -static int cdv_output_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - cdv_disable_vga(dev); - - cdv_intel_crt_init(dev, &dev_priv->mode_dev); - cdv_intel_lvds_init(dev, &dev_priv->mode_dev); - - /* These bits indicate HDMI not SDVO on CDV, but we don't yet support - the HDMI interface */ - if (REG_READ(SDVOB) & SDVO_DETECTED) - cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB); - if (REG_READ(SDVOC) & SDVO_DETECTED) - cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC); - return 0; -} - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - -/* - * Poulsbo Backlight Interfaces - */ - -#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ -#define BLC_PWM_FREQ_CALC_CONSTANT 32 -#define MHz 1000000 - -#define PSB_BLC_PWM_PRECISION_FACTOR 10 -#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE -#define PSB_BLC_MIN_PWM_REG_FREQ 0x2 - -#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) -#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) - -static int cdv_brightness; -static struct backlight_device *cdv_backlight_device; - -static int cdv_get_brightness(struct backlight_device *bd) -{ - /* return locally cached var instead of HW read (due to DPST etc.) */ - /* FIXME: ideally return actual value in case firmware fiddled with - it */ - return cdv_brightness; -} - - -static int cdv_backlight_setup(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long core_clock; - /* u32 bl_max_freq; */ - /* unsigned long value; */ - u16 bl_max_freq; - uint32_t value; - uint32_t blc_pwm_precision_factor; - - /* get bl_max_freq and pol from dev_priv*/ - if (!dev_priv->lvds_bl) { - dev_err(dev->dev, "Has no valid LVDS backlight info\n"); - return -ENOENT; - } - bl_max_freq = dev_priv->lvds_bl->freq; - blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR; - - core_clock = dev_priv->core_freq; - - value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; - value *= blc_pwm_precision_factor; - value /= bl_max_freq; - value /= blc_pwm_precision_factor; - - if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ || - value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ) - return -ERANGE; - else { - /* FIXME */ - } - return 0; -} - -static int cdv_set_brightness(struct backlight_device *bd) -{ - int level = bd->props.brightness; - - /* Percentage 1-100% being valid */ - if (level < 1) - level = 1; - - /*cdv_intel_lvds_set_brightness(dev, level); FIXME */ - cdv_brightness = level; - return 0; -} - -static const struct backlight_ops cdv_ops = { - .get_brightness = cdv_get_brightness, - .update_status = cdv_set_brightness, -}; - -static int cdv_backlight_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - int ret; - struct backlight_properties props; - - memset(&props, 0, sizeof(struct backlight_properties)); - props.max_brightness = 100; - props.type = BACKLIGHT_PLATFORM; - - cdv_backlight_device = backlight_device_register("psb-bl", - NULL, (void *)dev, &cdv_ops, &props); - if (IS_ERR(cdv_backlight_device)) - return PTR_ERR(cdv_backlight_device); - - ret = cdv_backlight_setup(dev); - if (ret < 0) { - backlight_device_unregister(cdv_backlight_device); - cdv_backlight_device = NULL; - return ret; - } - cdv_backlight_device->props.brightness = 100; - cdv_backlight_device->props.max_brightness = 100; - backlight_update_status(cdv_backlight_device); - dev_priv->backlight_device = cdv_backlight_device; - return 0; -} - -#endif - -/* - * Provide the Cedarview specific chip logic and low level methods - * for power management - * - * FIXME: we need to implement the apm/ospm base management bits - * for this and the MID devices. - */ - -static inline u32 CDV_MSG_READ32(uint port, uint offset) -{ - int mcr = (0x10<<24) | (port << 16) | (offset << 8); - uint32_t ret_val = 0; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - pci_write_config_dword(pci_root, 0xD0, mcr); - pci_read_config_dword(pci_root, 0xD4, &ret_val); - pci_dev_put(pci_root); - return ret_val; -} - -static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value) -{ - int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - pci_write_config_dword(pci_root, 0xD4, value); - pci_write_config_dword(pci_root, 0xD0, mcr); - pci_dev_put(pci_root); -} - -#define PSB_APM_CMD 0x0 -#define PSB_APM_STS 0x04 -#define PSB_PM_SSC 0x20 -#define PSB_PM_SSS 0x30 -#define PSB_PWRGT_GFX_MASK 0x3 -#define CDV_PWRGT_DISPLAY_CNTR 0x000fc00c -#define CDV_PWRGT_DISPLAY_STS 0x000fc00c - -static void cdv_init_pm(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 pwr_cnt; - int i; - - dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, - PSB_APMBA) & 0xFFFF; - dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, - PSB_OSPMBA) & 0xFFFF; - - /* Force power on for now */ - pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); - pwr_cnt &= ~PSB_PWRGT_GFX_MASK; - - outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); - for (i = 0; i < 5; i++) { - u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); - if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0) - break; - udelay(10); - } - pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC); - pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR; - outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC); - for (i = 0; i < 5; i++) { - u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); - if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0) - break; - udelay(10); - } -} - -/** - * cdv_save_display_registers - save registers lost on suspend - * @dev: our DRM device - * - * Save the state we need in order to be able to restore the interface - * upon resume from suspend - * - * FIXME: review - */ -static int cdv_save_display_registers(struct drm_device *dev) -{ - return 0; -} - -/** - * cdv_restore_display_registers - restore lost register state - * @dev: our DRM device - * - * Restore register state that was lost during suspend and resume. - * - * FIXME: review - */ -static int cdv_restore_display_registers(struct drm_device *dev) -{ - return 0; -} - -static int cdv_power_down(struct drm_device *dev) -{ - return 0; -} - -static int cdv_power_up(struct drm_device *dev) -{ - return 0; -} - -/* FIXME ? - shared with Poulsbo */ -static void cdv_get_core_freq(struct drm_device *dev) -{ - uint32_t clock; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - struct drm_psb_private *dev_priv = dev->dev_private; - - pci_write_config_dword(pci_root, 0xD0, 0xD0050300); - pci_read_config_dword(pci_root, 0xD4, &clock); - pci_dev_put(pci_root); - - switch (clock & 0x07) { - case 0: - dev_priv->core_freq = 100; - break; - case 1: - dev_priv->core_freq = 133; - break; - case 2: - dev_priv->core_freq = 150; - break; - case 3: - dev_priv->core_freq = 178; - break; - case 4: - dev_priv->core_freq = 200; - break; - case 5: - case 6: - case 7: - dev_priv->core_freq = 266; - default: - dev_priv->core_freq = 0; - } -} - -static int cdv_chip_setup(struct drm_device *dev) -{ - cdv_get_core_freq(dev); - gma_intel_opregion_init(dev); - psb_intel_init_bios(dev); - return 0; -} - -/* CDV is much like Poulsbo but has MID like SGX offsets and PM */ - -const struct psb_ops cdv_chip_ops = { - .name = "Cedartrail", - .accel_2d = 0, - .pipes = 2, - .sgx_offset = MRST_SGX_OFFSET, - .chip_setup = cdv_chip_setup, - - .crtc_helper = &cdv_intel_helper_funcs, - .crtc_funcs = &cdv_intel_crtc_funcs, - - .output_init = cdv_output_init, - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - .backlight_init = cdv_backlight_init, -#endif - - .init_pm = cdv_init_pm, - .save_regs = cdv_save_display_registers, - .restore_regs = cdv_restore_display_registers, - .power_down = cdv_power_down, - .power_up = cdv_power_up, -}; diff --git a/drivers/staging/gma500/cdv_device.h b/drivers/staging/gma500/cdv_device.h deleted file mode 100644 index 2a88b7beb551..000000000000 --- a/drivers/staging/gma500/cdv_device.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright © 2011 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs; -extern const struct drm_crtc_funcs cdv_intel_crtc_funcs; -extern void cdv_intel_crt_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev); -extern void cdv_intel_lvds_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev); -extern void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, - int reg); -extern struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev, - struct drm_crtc *crtc); - -extern inline void cdv_intel_wait_for_vblank(struct drm_device *dev) -{ - /* Wait for 20ms, i.e. one cycle at 50hz. */ - /* FIXME: msleep ?? */ - mdelay(20); -} - - diff --git a/drivers/staging/gma500/cdv_intel_crt.c b/drivers/staging/gma500/cdv_intel_crt.c deleted file mode 100644 index efda63b97b45..000000000000 --- a/drivers/staging/gma500/cdv_intel_crt.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * Copyright © 2006-2007 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Eric Anholt - */ - -#include -#include - -#include "intel_bios.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "power.h" -#include - - -static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode) -{ - struct drm_device *dev = encoder->dev; - u32 temp, reg; - reg = ADPA; - - temp = REG_READ(reg); - temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); - temp &= ~ADPA_DAC_ENABLE; - - switch (mode) { - case DRM_MODE_DPMS_ON: - temp |= ADPA_DAC_ENABLE; - break; - case DRM_MODE_DPMS_STANDBY: - temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; - break; - case DRM_MODE_DPMS_SUSPEND: - temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; - break; - case DRM_MODE_DPMS_OFF: - temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; - break; - } - - REG_WRITE(reg, temp); -} - -static int cdv_intel_crt_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - int max_clock = 0; - if (mode->flags & DRM_MODE_FLAG_DBLSCAN) - return MODE_NO_DBLESCAN; - - /* The lowest clock for CDV is 20000KHz */ - if (mode->clock < 20000) - return MODE_CLOCK_LOW; - - /* The max clock for CDV is 355 instead of 400 */ - max_clock = 355000; - if (mode->clock > max_clock) - return MODE_CLOCK_HIGH; - - if (mode->hdisplay > 1680 || mode->vdisplay > 1050) - return MODE_PANEL; - - return MODE_OK; -} - -static bool cdv_intel_crt_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - return true; -} - -static void cdv_intel_crt_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - - struct drm_device *dev = encoder->dev; - struct drm_crtc *crtc = encoder->crtc; - struct psb_intel_crtc *psb_intel_crtc = - to_psb_intel_crtc(crtc); - int dpll_md_reg; - u32 adpa, dpll_md; - u32 adpa_reg; - - if (psb_intel_crtc->pipe == 0) - dpll_md_reg = DPLL_A_MD; - else - dpll_md_reg = DPLL_B_MD; - - adpa_reg = ADPA; - - /* - * Disable separate mode multiplier used when cloning SDVO to CRT - * XXX this needs to be adjusted when we really are cloning - */ - { - dpll_md = REG_READ(dpll_md_reg); - REG_WRITE(dpll_md_reg, - dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); - } - - adpa = 0; - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - adpa |= ADPA_HSYNC_ACTIVE_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - adpa |= ADPA_VSYNC_ACTIVE_HIGH; - - if (psb_intel_crtc->pipe == 0) - adpa |= ADPA_PIPE_A_SELECT; - else - adpa |= ADPA_PIPE_B_SELECT; - - REG_WRITE(adpa_reg, adpa); -} - - -/** - * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence. - * - * \return true if CRT is connected. - * \return false if CRT is disconnected. - */ -static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector, - bool force) -{ - struct drm_device *dev = connector->dev; - u32 hotplug_en; - int i, tries = 0, ret = false; - u32 adpa_orig; - - /* disable the DAC when doing the hotplug detection */ - - adpa_orig = REG_READ(ADPA); - - REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE)); - - /* - * On a CDV thep, CRT detect sequence need to be done twice - * to get a reliable result. - */ - tries = 2; - - hotplug_en = REG_READ(PORT_HOTPLUG_EN); - hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK); - hotplug_en |= CRT_HOTPLUG_FORCE_DETECT; - - hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; - hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; - - for (i = 0; i < tries ; i++) { - unsigned long timeout; - /* turn on the FORCE_DETECT */ - REG_WRITE(PORT_HOTPLUG_EN, hotplug_en); - timeout = jiffies + msecs_to_jiffies(1000); - /* wait for FORCE_DETECT to go off */ - do { - if (!(REG_READ(PORT_HOTPLUG_EN) & - CRT_HOTPLUG_FORCE_DETECT)) - break; - msleep(1); - } while (time_after(timeout, jiffies)); - } - - if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) != - CRT_HOTPLUG_MONITOR_NONE) - ret = true; - - /* Restore the saved ADPA */ - REG_WRITE(ADPA, adpa_orig); - return ret; -} - -static enum drm_connector_status cdv_intel_crt_detect( - struct drm_connector *connector, bool force) -{ - if (cdv_intel_crt_detect_hotplug(connector, force)) - return connector_status_connected; - else - return connector_status_disconnected; -} - -static void cdv_intel_crt_destroy(struct drm_connector *connector) -{ - struct psb_intel_output *intel_output = to_psb_intel_output(connector); - - psb_intel_i2c_destroy(intel_output->ddc_bus); - drm_sysfs_connector_remove(connector); - drm_connector_cleanup(connector); - kfree(connector); -} - -static int cdv_intel_crt_get_modes(struct drm_connector *connector) -{ - struct psb_intel_output *intel_output = - to_psb_intel_output(connector); - return psb_intel_ddc_get_modes(intel_output); -} - -static int cdv_intel_crt_set_property(struct drm_connector *connector, - struct drm_property *property, - uint64_t value) -{ - return 0; -} - -/* - * Routines for controlling stuff on the analog port - */ - -static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = { - .dpms = cdv_intel_crt_dpms, - .mode_fixup = cdv_intel_crt_mode_fixup, - .prepare = psb_intel_encoder_prepare, - .commit = psb_intel_encoder_commit, - .mode_set = cdv_intel_crt_mode_set, -}; - -static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = { - .dpms = drm_helper_connector_dpms, - .detect = cdv_intel_crt_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = cdv_intel_crt_destroy, - .set_property = cdv_intel_crt_set_property, -}; - -static const struct drm_connector_helper_funcs - cdv_intel_crt_connector_helper_funcs = { - .mode_valid = cdv_intel_crt_mode_valid, - .get_modes = cdv_intel_crt_get_modes, - .best_encoder = psb_intel_best_encoder, -}; - -static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder) -{ - drm_encoder_cleanup(encoder); -} - -static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = { - .destroy = cdv_intel_crt_enc_destroy, -}; - -void cdv_intel_crt_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev) -{ - - struct psb_intel_output *psb_intel_output; - struct drm_connector *connector; - struct drm_encoder *encoder; - - u32 i2c_reg; - - psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL); - if (!psb_intel_output) - return; - - psb_intel_output->mode_dev = mode_dev; - connector = &psb_intel_output->base; - drm_connector_init(dev, connector, - &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); - - encoder = &psb_intel_output->enc; - drm_encoder_init(dev, encoder, - &cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC); - - drm_mode_connector_attach_encoder(&psb_intel_output->base, - &psb_intel_output->enc); - - /* Set up the DDC bus. */ - i2c_reg = GPIOA; - /* Remove the following code for CDV */ - /* - if (dev_priv->crt_ddc_bus != 0) - i2c_reg = dev_priv->crt_ddc_bus; - }*/ - psb_intel_output->ddc_bus = psb_intel_i2c_create(dev, - i2c_reg, "CRTDDC_A"); - if (!psb_intel_output->ddc_bus) { - dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " - "failed.\n"); - goto failed_ddc; - } - - psb_intel_output->type = INTEL_OUTPUT_ANALOG; - /* - psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT); - psb_intel_output->crtc_mask = (1 << 0) | (1 << 1); - */ - connector->interlace_allowed = 0; - connector->doublescan_allowed = 0; - - drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs); - drm_connector_helper_add(connector, - &cdv_intel_crt_connector_helper_funcs); - - drm_sysfs_connector_add(connector); - - return; -failed_ddc: - drm_encoder_cleanup(&psb_intel_output->enc); - drm_connector_cleanup(&psb_intel_output->base); - kfree(psb_intel_output); - return; -} diff --git a/drivers/staging/gma500/cdv_intel_display.c b/drivers/staging/gma500/cdv_intel_display.c deleted file mode 100644 index c63a32776a9e..000000000000 --- a/drivers/staging/gma500/cdv_intel_display.c +++ /dev/null @@ -1,1508 +0,0 @@ -/* - * Copyright © 2006-2011 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - */ - -#include -#include - -#include -#include "framebuffer.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "psb_intel_display.h" -#include "power.h" -#include "cdv_device.h" - - -struct cdv_intel_range_t { - int min, max; -}; - -struct cdv_intel_p2_t { - int dot_limit; - int p2_slow, p2_fast; -}; - -struct cdv_intel_clock_t { - /* given values */ - int n; - int m1, m2; - int p1, p2; - /* derived values */ - int dot; - int vco; - int m; - int p; -}; - -#define INTEL_P2_NUM 2 - -struct cdv_intel_limit_t { - struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1; - struct cdv_intel_p2_t p2; -}; - -#define CDV_LIMIT_SINGLE_LVDS_96 0 -#define CDV_LIMIT_SINGLE_LVDS_100 1 -#define CDV_LIMIT_DAC_HDMI_27 2 -#define CDV_LIMIT_DAC_HDMI_96 3 - -static const struct cdv_intel_limit_t cdv_intel_limits[] = { - { /* CDV_SIGNLE_LVDS_96MHz */ - .dot = {.min = 20000, .max = 115500}, - .vco = {.min = 1800000, .max = 3600000}, - .n = {.min = 2, .max = 6}, - .m = {.min = 60, .max = 160}, - .m1 = {.min = 0, .max = 0}, - .m2 = {.min = 58, .max = 158}, - .p = {.min = 28, .max = 140}, - .p1 = {.min = 2, .max = 10}, - .p2 = {.dot_limit = 200000, - .p2_slow = 14, .p2_fast = 14}, - }, - { /* CDV_SINGLE_LVDS_100MHz */ - .dot = {.min = 20000, .max = 115500}, - .vco = {.min = 1800000, .max = 3600000}, - .n = {.min = 2, .max = 6}, - .m = {.min = 60, .max = 160}, - .m1 = {.min = 0, .max = 0}, - .m2 = {.min = 58, .max = 158}, - .p = {.min = 28, .max = 140}, - .p1 = {.min = 2, .max = 10}, - /* The single-channel range is 25-112Mhz, and dual-channel - * is 80-224Mhz. Prefer single channel as much as possible. - */ - .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14}, - }, - { /* CDV_DAC_HDMI_27MHz */ - .dot = {.min = 20000, .max = 400000}, - .vco = {.min = 1809000, .max = 3564000}, - .n = {.min = 1, .max = 1}, - .m = {.min = 67, .max = 132}, - .m1 = {.min = 0, .max = 0}, - .m2 = {.min = 65, .max = 130}, - .p = {.min = 5, .max = 90}, - .p1 = {.min = 1, .max = 9}, - .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, - }, - { /* CDV_DAC_HDMI_96MHz */ - .dot = {.min = 20000, .max = 400000}, - .vco = {.min = 1800000, .max = 3600000}, - .n = {.min = 2, .max = 6}, - .m = {.min = 60, .max = 160}, - .m1 = {.min = 0, .max = 0}, - .m2 = {.min = 58, .max = 158}, - .p = {.min = 5, .max = 100}, - .p1 = {.min = 1, .max = 10}, - .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, - }, -}; - -#define _wait_for(COND, MS, W) ({ \ - unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ - int ret__ = 0; \ - while (!(COND)) { \ - if (time_after(jiffies, timeout__)) { \ - ret__ = -ETIMEDOUT; \ - break; \ - } \ - if (W && !in_dbg_master()) \ - msleep(W); \ - } \ - ret__; \ -}) - -#define wait_for(COND, MS) _wait_for(COND, MS, 1) - - -static int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val) -{ - int ret; - - ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); - if (ret) { - DRM_ERROR("timeout waiting for SB to idle before read\n"); - return ret; - } - - REG_WRITE(SB_ADDR, reg); - REG_WRITE(SB_PCKT, - SET_FIELD(SB_OPCODE_READ, SB_OPCODE) | - SET_FIELD(SB_DEST_DPLL, SB_DEST) | - SET_FIELD(0xf, SB_BYTE_ENABLE)); - - ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); - if (ret) { - DRM_ERROR("timeout waiting for SB to idle after read\n"); - return ret; - } - - *val = REG_READ(SB_DATA); - - return 0; -} - -static int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val) -{ - int ret; - static bool dpio_debug = true; - u32 temp; - - if (dpio_debug) { - if (cdv_sb_read(dev, reg, &temp) == 0) - DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp); - DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val); - } - - ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); - if (ret) { - DRM_ERROR("timeout waiting for SB to idle before write\n"); - return ret; - } - - REG_WRITE(SB_ADDR, reg); - REG_WRITE(SB_DATA, val); - REG_WRITE(SB_PCKT, - SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) | - SET_FIELD(SB_DEST_DPLL, SB_DEST) | - SET_FIELD(0xf, SB_BYTE_ENABLE)); - - ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); - if (ret) { - DRM_ERROR("timeout waiting for SB to idle after write\n"); - return ret; - } - - if (dpio_debug) { - if (cdv_sb_read(dev, reg, &temp) == 0) - DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp); - } - - return 0; -} - -/* Reset the DPIO configuration register. The BIOS does this at every - * mode set. - */ -static void cdv_sb_reset(struct drm_device *dev) -{ - - REG_WRITE(DPIO_CFG, 0); - REG_READ(DPIO_CFG); - REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N); -} - -/* Unlike most Intel display engines, on Cedarview the DPLL registers - * are behind this sideband bus. They must be programmed while the - * DPLL reference clock is on in the DPLL control register, but before - * the DPLL is enabled in the DPLL control register. - */ -static int -cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc, - struct cdv_intel_clock_t *clock) -{ - struct psb_intel_crtc *psb_crtc = - to_psb_intel_crtc(crtc); - int pipe = psb_crtc->pipe; - u32 m, n_vco, p; - int ret = 0; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - u32 ref_value; - - cdv_sb_reset(dev); - - if ((REG_READ(dpll_reg) & DPLL_SYNCLOCK_ENABLE) == 0) { - DRM_ERROR("Attempting to set DPLL with refclk disabled\n"); - return -EBUSY; - } - - /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */ - ref_value = 0x68A701; - - cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value); - - /* We don't know what the other fields of these regs are, so - * leave them in place. - */ - ret = cdv_sb_read(dev, SB_M(pipe), &m); - if (ret) - return ret; - m &= ~SB_M_DIVIDER_MASK; - m |= ((clock->m2) << SB_M_DIVIDER_SHIFT); - ret = cdv_sb_write(dev, SB_M(pipe), m); - if (ret) - return ret; - - ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco); - if (ret) - return ret; - - /* Follow the BIOS to program the N_DIVIDER REG */ - n_vco &= 0xFFFF; - n_vco |= 0x107; - n_vco &= ~(SB_N_VCO_SEL_MASK | - SB_N_DIVIDER_MASK | - SB_N_CB_TUNE_MASK); - - n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT); - - if (clock->vco < 2250000) { - n_vco |= (2 << SB_N_CB_TUNE_SHIFT); - n_vco |= (0 << SB_N_VCO_SEL_SHIFT); - } else if (clock->vco < 2750000) { - n_vco |= (1 << SB_N_CB_TUNE_SHIFT); - n_vco |= (1 << SB_N_VCO_SEL_SHIFT); - } else if (clock->vco < 3300000) { - n_vco |= (0 << SB_N_CB_TUNE_SHIFT); - n_vco |= (2 << SB_N_VCO_SEL_SHIFT); - } else { - n_vco |= (0 << SB_N_CB_TUNE_SHIFT); - n_vco |= (3 << SB_N_VCO_SEL_SHIFT); - } - - ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco); - if (ret) - return ret; - - ret = cdv_sb_read(dev, SB_P(pipe), &p); - if (ret) - return ret; - p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK); - p |= SET_FIELD(clock->p1, SB_P1_DIVIDER); - switch (clock->p2) { - case 5: - p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER); - break; - case 10: - p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER); - break; - case 14: - p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER); - break; - case 7: - p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER); - break; - default: - DRM_ERROR("Bad P2 clock: %d\n", clock->p2); - return -EINVAL; - } - ret = cdv_sb_write(dev, SB_P(pipe), p); - if (ret) - return ret; - - /* always Program the Lane Register for the Pipe A*/ - if (pipe == 0) { - /* Program the Lane0/1 for HDMI B */ - u32 lane_reg, lane_value; - - lane_reg = PSB_LANE0; - cdv_sb_read(dev, lane_reg, &lane_value); - lane_value &= ~(LANE_PLL_MASK); - lane_value |= LANE_PLL_ENABLE; - cdv_sb_write(dev, lane_reg, lane_value); - - lane_reg = PSB_LANE1; - cdv_sb_read(dev, lane_reg, &lane_value); - lane_value &= ~(LANE_PLL_MASK); - lane_value |= LANE_PLL_ENABLE; - cdv_sb_write(dev, lane_reg, lane_value); - - /* Program the Lane2/3 for HDMI C */ - lane_reg = PSB_LANE2; - cdv_sb_read(dev, lane_reg, &lane_value); - lane_value &= ~(LANE_PLL_MASK); - lane_value |= LANE_PLL_ENABLE; - cdv_sb_write(dev, lane_reg, lane_value); - - lane_reg = PSB_LANE3; - cdv_sb_read(dev, lane_reg, &lane_value); - lane_value &= ~(LANE_PLL_MASK); - lane_value |= LANE_PLL_ENABLE; - cdv_sb_write(dev, lane_reg, lane_value); - } - - return 0; -} - -/* - * Returns whether any output on the specified pipe is of the specified type - */ -bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type) -{ - struct drm_device *dev = crtc->dev; - struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_connector *l_entry; - - list_for_each_entry(l_entry, &mode_config->connector_list, head) { - if (l_entry->encoder && l_entry->encoder->crtc == crtc) { - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(l_entry); - if (psb_intel_output->type == type) - return true; - } - } - return false; -} - -static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc, - int refclk) -{ - const struct cdv_intel_limit_t *limit; - if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - /* - * Now only single-channel LVDS is supported on CDV. If it is - * incorrect, please add the dual-channel LVDS. - */ - if (refclk == 96000) - limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96]; - else - limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100]; - } else { - if (refclk == 27000) - limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27]; - else - limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96]; - } - return limit; -} - -/* m1 is reserved as 0 in CDV, n is a ring counter */ -static void cdv_intel_clock(struct drm_device *dev, - int refclk, struct cdv_intel_clock_t *clock) -{ - clock->m = clock->m2 + 2; - clock->p = clock->p1 * clock->p2; - clock->vco = (refclk * clock->m) / clock->n; - clock->dot = clock->vco / clock->p; -} - - -#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } -static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc, - const struct cdv_intel_limit_t *limit, - struct cdv_intel_clock_t *clock) -{ - if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) - INTELPllInvalid("p1 out of range\n"); - if (clock->p < limit->p.min || limit->p.max < clock->p) - INTELPllInvalid("p out of range\n"); - /* unnecessary to check the range of m(m1/M2)/n again */ - if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) - INTELPllInvalid("vco out of range\n"); - /* XXX: We may need to be checking "Dot clock" - * depending on the multiplier, connector, etc., - * rather than just a single range. - */ - if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) - INTELPllInvalid("dot out of range\n"); - - return true; -} - -static bool cdv_intel_find_best_PLL(struct drm_crtc *crtc, int target, - int refclk, - struct cdv_intel_clock_t *best_clock) -{ - struct drm_device *dev = crtc->dev; - struct cdv_intel_clock_t clock; - const struct cdv_intel_limit_t *limit = cdv_intel_limit(crtc, refclk); - int err = target; - - - if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && - (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { - /* - * For LVDS, if the panel is on, just rely on its current - * settings for dual-channel. We haven't figured out how to - * reliably set up different single/dual channel state, if we - * even can. - */ - if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) - clock.p2 = limit->p2.p2_fast; - else - clock.p2 = limit->p2.p2_slow; - } else { - if (target < limit->p2.dot_limit) - clock.p2 = limit->p2.p2_slow; - else - clock.p2 = limit->p2.p2_fast; - } - - memset(best_clock, 0, sizeof(*best_clock)); - clock.m1 = 0; - /* m1 is reserved as 0 in CDV, n is a ring counter. - So skip the m1 loop */ - for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { - for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; - clock.m2++) { - for (clock.p1 = limit->p1.min; - clock.p1 <= limit->p1.max; - clock.p1++) { - int this_err; - - cdv_intel_clock(dev, refclk, &clock); - - if (!cdv_intel_PLL_is_valid(crtc, - limit, &clock)) - continue; - - this_err = abs(clock.dot - target); - if (this_err < err) { - *best_clock = clock; - err = this_err; - } - } - } - } - - return err != target; -} - -int cdv_intel_pipe_set_base(struct drm_crtc *crtc, - int x, int y, struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); - int pipe = psb_intel_crtc->pipe; - unsigned long start, offset; - int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE); - int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); - int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - u32 dspcntr; - int ret = 0; - - if (!gma_power_begin(dev, true)) - return 0; - - /* no fb bound */ - if (!crtc->fb) { - dev_err(dev->dev, "No FB bound\n"); - goto psb_intel_pipe_cleaner; - } - - - /* We are displaying this buffer, make sure it is actually loaded - into the GTT */ - ret = psb_gtt_pin(psbfb->gtt); - if (ret < 0) - goto psb_intel_pipe_set_base_exit; - start = psbfb->gtt->offset; - offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8); - - REG_WRITE(dspstride, crtc->fb->pitches[0]); - - dspcntr = REG_READ(dspcntr_reg); - dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; - - switch (crtc->fb->bits_per_pixel) { - case 8: - dspcntr |= DISPPLANE_8BPP; - break; - case 16: - if (crtc->fb->depth == 15) - dspcntr |= DISPPLANE_15_16BPP; - else - dspcntr |= DISPPLANE_16BPP; - break; - case 24: - case 32: - dspcntr |= DISPPLANE_32BPP_NO_ALPHA; - break; - default: - dev_err(dev->dev, "Unknown color depth\n"); - ret = -EINVAL; - goto psb_intel_pipe_set_base_exit; - } - REG_WRITE(dspcntr_reg, dspcntr); - - dev_dbg(dev->dev, - "Writing base %08lX %08lX %d %d\n", start, offset, x, y); - - REG_WRITE(dspbase, offset); - REG_READ(dspbase); - REG_WRITE(dspsurf, start); - REG_READ(dspsurf); - -psb_intel_pipe_cleaner: - /* If there was a previous display we can now unpin it */ - if (old_fb) - psb_gtt_unpin(to_psb_fb(old_fb)->gtt); - -psb_intel_pipe_set_base_exit: - gma_power_end(dev); - return ret; -} - -/** - * Sets the power management mode of the pipe and plane. - * - * This code should probably grow support for turning the cursor off and back - * on appropriately at the same time as we're turning the pipe off/on. - */ -static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - u32 temp; - bool enabled; - - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - /* Enable the DPLL */ - temp = REG_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) == 0) { - REG_WRITE(dpll_reg, temp); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - } - - /* Jim Bish - switch plan and pipe per scott */ - /* Enable the plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - REG_WRITE(dspcntr_reg, - temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - } - - udelay(150); - - /* Enable the pipe */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) == 0) - REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); - - psb_intel_crtc_load_lut(crtc); - - /* Give the overlay scaler a chance to enable - * if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, true); TODO */ - break; - case DRM_MODE_DPMS_OFF: - /* Give the overlay scaler a chance to disable - * if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - - /* Jim Bish - changed pipe/plane here as well. */ - - /* Wait for vblank for the disable to take effect */ - cdv_intel_wait_for_vblank(dev); - - /* Next, disable display pipes */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); - REG_READ(pipeconf_reg); - } - - /* Wait for vblank for the disable to take effect. */ - cdv_intel_wait_for_vblank(dev); - - udelay(150); - - /* Disable display plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(dspcntr_reg, - temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - REG_READ(dspbase_reg); - } - - temp = REG_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) != 0) { - REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - } - - /* Wait for the clocks to turn off. */ - udelay(150); - break; - } - enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; - /*Set FIFO Watermarks*/ - REG_WRITE(DSPARB, 0x3F3E); -} - -static void cdv_intel_crtc_prepare(struct drm_crtc *crtc) -{ - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); -} - -static void cdv_intel_crtc_commit(struct drm_crtc *crtc) -{ - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); -} - -void cdv_intel_encoder_prepare(struct drm_encoder *encoder) -{ - struct drm_encoder_helper_funcs *encoder_funcs = - encoder->helper_private; - /* lvds has its own version of prepare see cdv_intel_lvds_prepare */ - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); -} - -void cdv_intel_encoder_commit(struct drm_encoder *encoder) -{ - struct drm_encoder_helper_funcs *encoder_funcs = - encoder->helper_private; - /* lvds has its own version of commit see cdv_intel_lvds_commit */ - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); -} - -static bool cdv_intel_crtc_mode_fixup(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - return true; -} - - -/** - * Return the pipe currently connected to the panel fitter, - * or -1 if the panel fitter is not present or not in use - */ -static int cdv_intel_panel_fitter_pipe(struct drm_device *dev) -{ - u32 pfit_control; - - pfit_control = REG_READ(PFIT_CONTROL); - - /* See if the panel fitter is in use */ - if ((pfit_control & PFIT_ENABLE) == 0) - return -1; - return (pfit_control >> 29) & 0x3; -} - -static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dpll_md_reg = (psb_intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; - int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; - int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; - int refclk; - struct cdv_intel_clock_t clock; - u32 dpll = 0, dspcntr, pipeconf; - bool ok, is_sdvo = false, is_dvo = false; - bool is_crt = false, is_lvds = false, is_tv = false; - bool is_hdmi = false; - struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_connector *connector; - - list_for_each_entry(connector, &mode_config->connector_list, head) { - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - if (!connector->encoder - || connector->encoder->crtc != crtc) - continue; - - switch (psb_intel_output->type) { - case INTEL_OUTPUT_LVDS: - is_lvds = true; - break; - case INTEL_OUTPUT_SDVO: - is_sdvo = true; - break; - case INTEL_OUTPUT_DVO: - is_dvo = true; - break; - case INTEL_OUTPUT_TVOUT: - is_tv = true; - break; - case INTEL_OUTPUT_ANALOG: - is_crt = true; - break; - case INTEL_OUTPUT_HDMI: - is_hdmi = true; - break; - } - } - - refclk = 96000; - - /* Hack selection about ref clk for CRT */ - /* Select 27MHz as the reference clk for HDMI */ - if (is_crt || is_hdmi) - refclk = 27000; - - drm_mode_debug_printmodeline(adjusted_mode); - - ok = cdv_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, - &clock); - if (!ok) { - dev_err(dev->dev, "Couldn't find PLL settings for mode!\n"); - return 0; - } - - dpll = DPLL_VGA_MODE_DIS; - if (is_tv) { - /* XXX: just matching BIOS for now */ -/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ - dpll |= 3; - } - dpll |= PLL_REF_INPUT_DREFCLK; - - dpll |= DPLL_SYNCLOCK_ENABLE; - dpll |= DPLL_VGA_MODE_DIS; - if (is_lvds) - dpll |= DPLLB_MODE_LVDS; - else - dpll |= DPLLB_MODE_DAC_SERIAL; - /* dpll |= (2 << 11); */ - - /* setup pipeconf */ - pipeconf = REG_READ(pipeconf_reg); - - /* Set up the display plane register */ - dspcntr = DISPPLANE_GAMMA_ENABLE; - - if (pipe == 0) - dspcntr |= DISPPLANE_SEL_PIPE_A; - else - dspcntr |= DISPPLANE_SEL_PIPE_B; - - dspcntr |= DISPLAY_PLANE_ENABLE; - pipeconf |= PIPEACONF_ENABLE; - - REG_WRITE(dpll_reg, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE); - REG_READ(dpll_reg); - - cdv_dpll_set_clock_cdv(dev, crtc, &clock); - - udelay(150); - - - /* The LVDS pin pair needs to be on before the DPLLs are enabled. - * This is an exception to the general rule that mode_set doesn't turn - * things on. - */ - if (is_lvds) { - u32 lvds = REG_READ(LVDS); - - lvds |= - LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | - LVDS_PIPEB_SELECT; - /* Set the B0-B3 data pairs corresponding to - * whether we're going to - * set the DPLLs for dual-channel mode or not. - */ - if (clock.p2 == 7) - lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - else - lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); - - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) - * appropriately here, but we need to look more - * thoroughly into how panels behave in the two modes. - */ - - REG_WRITE(LVDS, lvds); - REG_READ(LVDS); - } - - dpll |= DPLL_VCO_ENABLE; - - /* Disable the panel fitter if it was on our pipe */ - if (cdv_intel_panel_fitter_pipe(dev) == pipe) - REG_WRITE(PFIT_CONTROL, 0); - - DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); - drm_mode_debug_printmodeline(mode); - - REG_WRITE(dpll_reg, - (REG_READ(dpll_reg) & ~DPLL_LOCK) | DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */ - - if (!(REG_READ(dpll_reg) & DPLL_LOCK)) { - dev_err(dev->dev, "Failed to get DPLL lock\n"); - return -EBUSY; - } - - { - int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; - REG_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); - } - - REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | - ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | - ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | - ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | - ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | - ((adjusted_mode->crtc_vsync_end - 1) << 16)); - /* pipesrc and dspsize control the size that is scaled from, - * which should always be the user's requested size. - */ - REG_WRITE(dspsize_reg, - ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); - REG_WRITE(dsppos_reg, 0); - REG_WRITE(pipesrc_reg, - ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); - REG_WRITE(pipeconf_reg, pipeconf); - REG_READ(pipeconf_reg); - - cdv_intel_wait_for_vblank(dev); - - REG_WRITE(dspcntr_reg, dspcntr); - - /* Flush the plane changes */ - { - struct drm_crtc_helper_funcs *crtc_funcs = - crtc->helper_private; - crtc_funcs->mode_set_base(crtc, x, y, old_fb); - } - - cdv_intel_wait_for_vblank(dev); - - return 0; -} - -/** Loads the palette/gamma unit for the CRTC with the prepared values */ -void cdv_intel_crtc_load_lut(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_psb_private *dev_priv = - (struct drm_psb_private *)dev->dev_private; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int palreg = PALETTE_A; - int i; - - /* The clocks have to be on to load the palette. */ - if (!crtc->enabled) - return; - - switch (psb_intel_crtc->pipe) { - case 0: - break; - case 1: - palreg = PALETTE_B; - break; - case 2: - palreg = PALETTE_C; - break; - default: - dev_err(dev->dev, "Illegal Pipe Number.\n"); - return; - } - - if (gma_power_begin(dev, false)) { - for (i = 0; i < 256; i++) { - REG_WRITE(palreg + 4 * i, - ((psb_intel_crtc->lut_r[i] + - psb_intel_crtc->lut_adj[i]) << 16) | - ((psb_intel_crtc->lut_g[i] + - psb_intel_crtc->lut_adj[i]) << 8) | - (psb_intel_crtc->lut_b[i] + - psb_intel_crtc->lut_adj[i])); - } - gma_power_end(dev); - } else { - for (i = 0; i < 256; i++) { - dev_priv->save_palette_a[i] = - ((psb_intel_crtc->lut_r[i] + - psb_intel_crtc->lut_adj[i]) << 16) | - ((psb_intel_crtc->lut_g[i] + - psb_intel_crtc->lut_adj[i]) << 8) | - (psb_intel_crtc->lut_b[i] + - psb_intel_crtc->lut_adj[i]); - } - - } -} - -/** - * Save HW states of giving crtc - */ -static void cdv_intel_crtc_save(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - /* struct drm_psb_private *dev_priv = - (struct drm_psb_private *)dev->dev_private; */ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; - int pipeA = (psb_intel_crtc->pipe == 0); - uint32_t paletteReg; - int i; - - if (!crtc_state) { - dev_dbg(dev->dev, "No CRTC state found\n"); - return; - } - - crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR); - crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF); - crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC); - crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0); - crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1); - crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B); - crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B); - crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B); - crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B); - crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B); - crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B); - crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B); - crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE); - - /*NOTE: DSPSIZE DSPPOS only for psb*/ - crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE); - crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS); - - crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE); - - DRM_DEBUG("(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", - crtc_state->saveDSPCNTR, - crtc_state->savePIPECONF, - crtc_state->savePIPESRC, - crtc_state->saveFP0, - crtc_state->saveFP1, - crtc_state->saveDPLL, - crtc_state->saveHTOTAL, - crtc_state->saveHBLANK, - crtc_state->saveHSYNC, - crtc_state->saveVTOTAL, - crtc_state->saveVBLANK, - crtc_state->saveVSYNC, - crtc_state->saveDSPSTRIDE, - crtc_state->saveDSPSIZE, - crtc_state->saveDSPPOS, - crtc_state->saveDSPBASE - ); - - paletteReg = pipeA ? PALETTE_A : PALETTE_B; - for (i = 0; i < 256; ++i) - crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2)); -} - -/** - * Restore HW states of giving crtc - */ -static void cdv_intel_crtc_restore(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - /* struct drm_psb_private * dev_priv = - (struct drm_psb_private *)dev->dev_private; */ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; - /* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */ - int pipeA = (psb_intel_crtc->pipe == 0); - uint32_t paletteReg; - int i; - - if (!crtc_state) { - dev_dbg(dev->dev, "No crtc state\n"); - return; - } - - DRM_DEBUG( - "current:(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", - REG_READ(pipeA ? DSPACNTR : DSPBCNTR), - REG_READ(pipeA ? PIPEACONF : PIPEBCONF), - REG_READ(pipeA ? PIPEASRC : PIPEBSRC), - REG_READ(pipeA ? FPA0 : FPB0), - REG_READ(pipeA ? FPA1 : FPB1), - REG_READ(pipeA ? DPLL_A : DPLL_B), - REG_READ(pipeA ? HTOTAL_A : HTOTAL_B), - REG_READ(pipeA ? HBLANK_A : HBLANK_B), - REG_READ(pipeA ? HSYNC_A : HSYNC_B), - REG_READ(pipeA ? VTOTAL_A : VTOTAL_B), - REG_READ(pipeA ? VBLANK_A : VBLANK_B), - REG_READ(pipeA ? VSYNC_A : VSYNC_B), - REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE), - REG_READ(pipeA ? DSPASIZE : DSPBSIZE), - REG_READ(pipeA ? DSPAPOS : DSPBPOS), - REG_READ(pipeA ? DSPABASE : DSPBBASE) - ); - - DRM_DEBUG( - "saved: (%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", - crtc_state->saveDSPCNTR, - crtc_state->savePIPECONF, - crtc_state->savePIPESRC, - crtc_state->saveFP0, - crtc_state->saveFP1, - crtc_state->saveDPLL, - crtc_state->saveHTOTAL, - crtc_state->saveHBLANK, - crtc_state->saveHSYNC, - crtc_state->saveVTOTAL, - crtc_state->saveVBLANK, - crtc_state->saveVSYNC, - crtc_state->saveDSPSTRIDE, - crtc_state->saveDSPSIZE, - crtc_state->saveDSPPOS, - crtc_state->saveDSPBASE - ); - - - if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { - REG_WRITE(pipeA ? DPLL_A : DPLL_B, - crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); - REG_READ(pipeA ? DPLL_A : DPLL_B); - DRM_DEBUG("write dpll: %x\n", - REG_READ(pipeA ? DPLL_A : DPLL_B)); - udelay(150); - } - - REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0); - REG_READ(pipeA ? FPA0 : FPB0); - - REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1); - REG_READ(pipeA ? FPA1 : FPB1); - - REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL); - REG_READ(pipeA ? DPLL_A : DPLL_B); - udelay(150); - - REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL); - REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK); - REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC); - REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL); - REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK); - REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC); - REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE); - - REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE); - REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS); - - REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC); - REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE); - REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF); - - cdv_intel_wait_for_vblank(dev); - - REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR); - REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE); - - cdv_intel_wait_for_vblank(dev); - - paletteReg = pipeA ? PALETTE_A : PALETTE_B; - for (i = 0; i < 256; ++i) - REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]); -} - -static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, - struct drm_file *file_priv, - uint32_t handle, - uint32_t width, uint32_t height) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; - uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; - uint32_t temp; - size_t addr = 0; - struct gtt_range *gt; - struct drm_gem_object *obj; - int ret; - - /* if we want to turn of the cursor ignore width and height */ - if (!handle) { - /* turn off the cursor */ - temp = CURSOR_MODE_DISABLE; - - if (gma_power_begin(dev, false)) { - REG_WRITE(control, temp); - REG_WRITE(base, 0); - gma_power_end(dev); - } - - /* unpin the old GEM object */ - if (psb_intel_crtc->cursor_obj) { - gt = container_of(psb_intel_crtc->cursor_obj, - struct gtt_range, gem); - psb_gtt_unpin(gt); - drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = NULL; - } - - return 0; - } - - /* Currently we only support 64x64 cursors */ - if (width != 64 || height != 64) { - dev_dbg(dev->dev, "we currently only support 64x64 cursors\n"); - return -EINVAL; - } - - obj = drm_gem_object_lookup(dev, file_priv, handle); - if (!obj) - return -ENOENT; - - if (obj->size < width * height * 4) { - dev_dbg(dev->dev, "buffer is to small\n"); - return -ENOMEM; - } - - gt = container_of(obj, struct gtt_range, gem); - - /* Pin the memory into the GTT */ - ret = psb_gtt_pin(gt); - if (ret) { - dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); - return ret; - } - - addr = gt->offset; /* Or resource.start ??? */ - - psb_intel_crtc->cursor_addr = addr; - - temp = 0; - /* set the pipe for the cursor */ - temp |= (pipe << 28); - temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; - - if (gma_power_begin(dev, false)) { - REG_WRITE(control, temp); - REG_WRITE(base, addr); - gma_power_end(dev); - } - - /* unpin the old GEM object */ - if (psb_intel_crtc->cursor_obj) { - gt = container_of(psb_intel_crtc->cursor_obj, - struct gtt_range, gem); - psb_gtt_unpin(gt); - drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = obj; - } - return 0; -} - -static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - uint32_t temp = 0; - uint32_t adder; - - - if (x < 0) { - temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); - x = -x; - } - if (y < 0) { - temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); - y = -y; - } - - temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); - temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); - - adder = psb_intel_crtc->cursor_addr; - - if (gma_power_begin(dev, false)) { - REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); - REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder); - gma_power_end(dev); - } - return 0; -} - -static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, - u16 *green, u16 *blue, uint32_t start, uint32_t size) -{ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int i; - int end = (start + size > 256) ? 256 : start + size; - - for (i = start; i < end; i++) { - psb_intel_crtc->lut_r[i] = red[i] >> 8; - psb_intel_crtc->lut_g[i] = green[i] >> 8; - psb_intel_crtc->lut_b[i] = blue[i] >> 8; - } - - cdv_intel_crtc_load_lut(crtc); -} - -static int cdv_crtc_set_config(struct drm_mode_set *set) -{ - int ret = 0; - struct drm_device *dev = set->crtc->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (!dev_priv->rpm_enabled) - return drm_crtc_helper_set_config(set); - - pm_runtime_forbid(&dev->pdev->dev); - - ret = drm_crtc_helper_set_config(set); - - pm_runtime_allow(&dev->pdev->dev); - - return ret; -} - -/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ - -/* FIXME: why are we using this, should it be cdv_ in this tree ? */ - -static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock) -{ - clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); - clock->p = clock->p1 * clock->p2; - clock->vco = refclk * clock->m / (clock->n + 2); - clock->dot = clock->vco / clock->p; -} - -/* Returns the clock of the currently programmed mode of the given pipe. */ -static int cdv_intel_crtc_clock_get(struct drm_device *dev, - struct drm_crtc *crtc) -{ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - u32 dpll; - u32 fp; - struct cdv_intel_clock_t clock; - bool is_lvds; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (gma_power_begin(dev, false)) { - dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B); - if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) - fp = REG_READ((pipe == 0) ? FPA0 : FPB0); - else - fp = REG_READ((pipe == 0) ? FPA1 : FPB1); - is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); - gma_power_end(dev); - } else { - dpll = (pipe == 0) ? - dev_priv->saveDPLL_A : dev_priv->saveDPLL_B; - - if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) - fp = (pipe == 0) ? - dev_priv->saveFPA0 : - dev_priv->saveFPB0; - else - fp = (pipe == 0) ? - dev_priv->saveFPA1 : - dev_priv->saveFPB1; - - is_lvds = (pipe == 1) && (dev_priv->saveLVDS & LVDS_PORT_EN); - } - - clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; - clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; - clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; - - if (is_lvds) { - clock.p1 = - ffs((dpll & - DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> - DPLL_FPA01_P1_POST_DIV_SHIFT); - if (clock.p1 == 0) { - clock.p1 = 4; - dev_err(dev->dev, "PLL %d\n", dpll); - } - clock.p2 = 14; - - if ((dpll & PLL_REF_INPUT_MASK) == - PLLB_REF_INPUT_SPREADSPECTRUMIN) { - /* XXX: might not be 66MHz */ - i8xx_clock(66000, &clock); - } else - i8xx_clock(48000, &clock); - } else { - if (dpll & PLL_P1_DIVIDE_BY_TWO) - clock.p1 = 2; - else { - clock.p1 = - ((dpll & - DPLL_FPA01_P1_POST_DIV_MASK_I830) >> - DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; - } - if (dpll & PLL_P2_DIVIDE_BY_4) - clock.p2 = 4; - else - clock.p2 = 2; - - i8xx_clock(48000, &clock); - } - - /* XXX: It would be nice to validate the clocks, but we can't reuse - * i830PllIsValid() because it relies on the xf86_config connector - * configuration being accurate, which it isn't necessarily. - */ - - return clock.dot; -} - -/** Returns the currently programmed mode of the given pipe. */ -struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev, - struct drm_crtc *crtc) -{ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - struct drm_display_mode *mode; - int htot; - int hsync; - int vtot; - int vsync; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (gma_power_begin(dev, false)) { - htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B); - hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B); - vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B); - vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B); - gma_power_end(dev); - } else { - htot = (pipe == 0) ? - dev_priv->saveHTOTAL_A : dev_priv->saveHTOTAL_B; - hsync = (pipe == 0) ? - dev_priv->saveHSYNC_A : dev_priv->saveHSYNC_B; - vtot = (pipe == 0) ? - dev_priv->saveVTOTAL_A : dev_priv->saveVTOTAL_B; - vsync = (pipe == 0) ? - dev_priv->saveVSYNC_A : dev_priv->saveVSYNC_B; - } - - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) - return NULL; - - mode->clock = cdv_intel_crtc_clock_get(dev, crtc); - mode->hdisplay = (htot & 0xffff) + 1; - mode->htotal = ((htot & 0xffff0000) >> 16) + 1; - mode->hsync_start = (hsync & 0xffff) + 1; - mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; - mode->vdisplay = (vtot & 0xffff) + 1; - mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; - mode->vsync_start = (vsync & 0xffff) + 1; - mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - return mode; -} - -static void cdv_intel_crtc_destroy(struct drm_crtc *crtc) -{ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - - kfree(psb_intel_crtc->crtc_state); - drm_crtc_cleanup(crtc); - kfree(psb_intel_crtc); -} - -const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = { - .dpms = cdv_intel_crtc_dpms, - .mode_fixup = cdv_intel_crtc_mode_fixup, - .mode_set = cdv_intel_crtc_mode_set, - .mode_set_base = cdv_intel_pipe_set_base, - .prepare = cdv_intel_crtc_prepare, - .commit = cdv_intel_crtc_commit, -}; - -const struct drm_crtc_funcs cdv_intel_crtc_funcs = { - .save = cdv_intel_crtc_save, - .restore = cdv_intel_crtc_restore, - .cursor_set = cdv_intel_crtc_cursor_set, - .cursor_move = cdv_intel_crtc_cursor_move, - .gamma_set = cdv_intel_crtc_gamma_set, - .set_config = cdv_crtc_set_config, - .destroy = cdv_intel_crtc_destroy, -}; - -/* - * Set the default value of cursor control and base register - * to zero. This is a workaround for h/w defect on oaktrail - */ -void cdv_intel_cursor_init(struct drm_device *dev, int pipe) -{ - uint32_t control; - uint32_t base; - - switch (pipe) { - case 0: - control = CURACNTR; - base = CURABASE; - break; - case 1: - control = CURBCNTR; - base = CURBBASE; - break; - case 2: - control = CURCCNTR; - base = CURCBASE; - break; - default: - return; - } - - REG_WRITE(control, 0); - REG_WRITE(base, 0); -} - diff --git a/drivers/staging/gma500/cdv_intel_hdmi.c b/drivers/staging/gma500/cdv_intel_hdmi.c deleted file mode 100644 index cbca2b0c7d58..000000000000 --- a/drivers/staging/gma500/cdv_intel_hdmi.c +++ /dev/null @@ -1,376 +0,0 @@ -/* - * Copyright © 2006-2011 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * - * FIXME: - * We should probably make this generic and share it with Medfield - */ - -#include -#include -#include -#include -#include "psb_intel_drv.h" -#include "psb_drv.h" -#include "psb_intel_reg.h" -#include - -/* hdmi control bits */ -#define HDMI_NULL_PACKETS_DURING_VSYNC (1 << 9) -#define HDMI_BORDER_ENABLE (1 << 7) -#define HDMI_AUDIO_ENABLE (1 << 6) -#define HDMI_VSYNC_ACTIVE_HIGH (1 << 4) -#define HDMI_HSYNC_ACTIVE_HIGH (1 << 3) -/* hdmi-b control bits */ -#define HDMIB_PIPE_B_SELECT (1 << 30) - - -struct mid_intel_hdmi_priv { - u32 hdmi_reg; - u32 save_HDMIB; - bool has_hdmi_sink; - bool has_hdmi_audio; - /* Should set this when detect hotplug */ - bool hdmi_device_connected; - struct mdfld_hdmi_i2c *i2c_bus; - struct i2c_adapter *hdmi_i2c_adapter; /* for control functions */ - struct drm_device *dev; -}; - -static void cdv_hdmi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv; - u32 hdmib; - struct drm_crtc *crtc = encoder->crtc; - struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc); - - hdmib = (2 << 10); - - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - hdmib |= HDMI_VSYNC_ACTIVE_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - hdmib |= HDMI_HSYNC_ACTIVE_HIGH; - - if (intel_crtc->pipe == 1) - hdmib |= HDMIB_PIPE_B_SELECT; - - if (hdmi_priv->has_hdmi_audio) { - hdmib |= HDMI_AUDIO_ENABLE; - hdmib |= HDMI_NULL_PACKETS_DURING_VSYNC; - } - - REG_WRITE(hdmi_priv->hdmi_reg, hdmib); - REG_READ(hdmi_priv->hdmi_reg); -} - -static bool cdv_hdmi_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - return true; -} - -static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv; - u32 hdmib; - - hdmib = REG_READ(hdmi_priv->hdmi_reg); - - if (mode != DRM_MODE_DPMS_ON) - REG_WRITE(hdmi_priv->hdmi_reg, hdmib & ~HDMIB_PORT_EN); - else - REG_WRITE(hdmi_priv->hdmi_reg, hdmib | HDMIB_PORT_EN); - REG_READ(hdmi_priv->hdmi_reg); -} - -static void cdv_hdmi_save(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct psb_intel_output *output = to_psb_intel_output(connector); - struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv; - - hdmi_priv->save_HDMIB = REG_READ(hdmi_priv->hdmi_reg); -} - -static void cdv_hdmi_restore(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct psb_intel_output *output = to_psb_intel_output(connector); - struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv; - - REG_WRITE(hdmi_priv->hdmi_reg, hdmi_priv->save_HDMIB); - REG_READ(hdmi_priv->hdmi_reg); -} - -static enum drm_connector_status cdv_hdmi_detect( - struct drm_connector *connector, bool force) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct mid_intel_hdmi_priv *hdmi_priv = psb_intel_output->dev_priv; - struct edid *edid = NULL; - enum drm_connector_status status = connector_status_disconnected; - - edid = drm_get_edid(&psb_intel_output->base, - psb_intel_output->hdmi_i2c_adapter); - - hdmi_priv->has_hdmi_sink = false; - hdmi_priv->has_hdmi_audio = false; - if (edid) { - if (edid->input & DRM_EDID_INPUT_DIGITAL) { - status = connector_status_connected; - hdmi_priv->has_hdmi_sink = - drm_detect_hdmi_monitor(edid); - hdmi_priv->has_hdmi_audio = - drm_detect_monitor_audio(edid); - } - - psb_intel_output->base.display_info.raw_edid = NULL; - kfree(edid); - } - return status; -} - -static int cdv_hdmi_set_property(struct drm_connector *connector, - struct drm_property *property, - uint64_t value) -{ - struct drm_encoder *encoder = connector->encoder; - - if (!strcmp(property->name, "scaling mode") && encoder) { - struct psb_intel_crtc *crtc = to_psb_intel_crtc(encoder->crtc); - bool centre; - uint64_t curValue; - - if (!crtc) - return -1; - - switch (value) { - case DRM_MODE_SCALE_FULLSCREEN: - break; - case DRM_MODE_SCALE_NO_SCALE: - break; - case DRM_MODE_SCALE_ASPECT: - break; - default: - return -1; - } - - if (drm_connector_property_get_value(connector, - property, &curValue)) - return -1; - - if (curValue == value) - return 0; - - if (drm_connector_property_set_value(connector, - property, value)) - return -1; - - centre = (curValue == DRM_MODE_SCALE_NO_SCALE) || - (value == DRM_MODE_SCALE_NO_SCALE); - - if (crtc->saved_mode.hdisplay != 0 && - crtc->saved_mode.vdisplay != 0) { - if (centre) { - if (!drm_crtc_helper_set_mode(encoder->crtc, &crtc->saved_mode, - encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb)) - return -1; - } else { - struct drm_encoder_helper_funcs *helpers - = encoder->helper_private; - helpers->mode_set(encoder, &crtc->saved_mode, - &crtc->saved_adjusted_mode); - } - } - } - return 0; -} - -/* - * Return the list of HDMI DDC modes if available. - */ -static int cdv_hdmi_get_modes(struct drm_connector *connector) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct edid *edid = NULL; - int ret = 0; - - edid = drm_get_edid(&psb_intel_output->base, - psb_intel_output->hdmi_i2c_adapter); - if (edid) { - drm_mode_connector_update_edid_property(&psb_intel_output-> - base, edid); - ret = drm_add_edid_modes(&psb_intel_output->base, edid); - kfree(edid); - } - return ret; -} - -static int cdv_hdmi_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - - if (mode->clock > 165000) - return MODE_CLOCK_HIGH; - if (mode->clock < 20000) - return MODE_CLOCK_HIGH; - - /* just in case */ - if (mode->flags & DRM_MODE_FLAG_DBLSCAN) - return MODE_NO_DBLESCAN; - - /* just in case */ - if (mode->flags & DRM_MODE_FLAG_INTERLACE) - return MODE_NO_INTERLACE; - - /* - * FIXME: for now we limit the size to 1680x1050 on CDV, otherwise it - * will go beyond the stolen memory size allocated to the framebuffer - */ - if (mode->hdisplay > 1680) - return MODE_PANEL; - if (mode->vdisplay > 1050) - return MODE_PANEL; - return MODE_OK; -} - -static void cdv_hdmi_destroy(struct drm_connector *connector) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - if (psb_intel_output->ddc_bus) - psb_intel_i2c_destroy(psb_intel_output->ddc_bus); - drm_sysfs_connector_remove(connector); - drm_connector_cleanup(connector); - kfree(connector); -} - -static const struct drm_encoder_helper_funcs cdv_hdmi_helper_funcs = { - .dpms = cdv_hdmi_dpms, - .mode_fixup = cdv_hdmi_mode_fixup, - .prepare = psb_intel_encoder_prepare, - .mode_set = cdv_hdmi_mode_set, - .commit = psb_intel_encoder_commit, -}; - -static const struct drm_connector_helper_funcs - cdv_hdmi_connector_helper_funcs = { - .get_modes = cdv_hdmi_get_modes, - .mode_valid = cdv_hdmi_mode_valid, - .best_encoder = psb_intel_best_encoder, -}; - -static const struct drm_connector_funcs cdv_hdmi_connector_funcs = { - .dpms = drm_helper_connector_dpms, - .save = cdv_hdmi_save, - .restore = cdv_hdmi_restore, - .detect = cdv_hdmi_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .set_property = cdv_hdmi_set_property, - .destroy = cdv_hdmi_destroy, -}; - -void cdv_hdmi_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev, int reg) -{ - struct psb_intel_output *psb_intel_output; - struct drm_connector *connector; - struct drm_encoder *encoder; - struct mid_intel_hdmi_priv *hdmi_priv; - int ddc_bus; - - psb_intel_output = kzalloc(sizeof(struct psb_intel_output) + - sizeof(struct mid_intel_hdmi_priv), GFP_KERNEL); - if (!psb_intel_output) - return; - - hdmi_priv = (struct mid_intel_hdmi_priv *)(psb_intel_output + 1); - psb_intel_output->mode_dev = mode_dev; - connector = &psb_intel_output->base; - encoder = &psb_intel_output->enc; - drm_connector_init(dev, &psb_intel_output->base, - &cdv_hdmi_connector_funcs, - DRM_MODE_CONNECTOR_DVID); - - drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs, - DRM_MODE_ENCODER_TMDS); - - drm_mode_connector_attach_encoder(&psb_intel_output->base, - &psb_intel_output->enc); - psb_intel_output->type = INTEL_OUTPUT_HDMI; - hdmi_priv->hdmi_reg = reg; - hdmi_priv->has_hdmi_sink = false; - psb_intel_output->dev_priv = hdmi_priv; - - drm_encoder_helper_add(encoder, &cdv_hdmi_helper_funcs); - drm_connector_helper_add(connector, - &cdv_hdmi_connector_helper_funcs); - connector->display_info.subpixel_order = SubPixelHorizontalRGB; - connector->interlace_allowed = false; - connector->doublescan_allowed = false; - - drm_connector_attach_property(connector, - dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN); - - switch (reg) { - case SDVOB: - ddc_bus = GPIOE; - break; - case SDVOC: - ddc_bus = GPIOD; - break; - default: - DRM_ERROR("unknown reg 0x%x for HDMI\n", reg); - goto failed_ddc; - break; - } - - psb_intel_output->ddc_bus = psb_intel_i2c_create(dev, - ddc_bus, (reg == SDVOB) ? "HDMIB" : "HDMIC"); - - if (!psb_intel_output->ddc_bus) { - dev_err(dev->dev, "No ddc adapter available!\n"); - goto failed_ddc; - } - psb_intel_output->hdmi_i2c_adapter = - &(psb_intel_output->ddc_bus->adapter); - hdmi_priv->dev = dev; - drm_sysfs_connector_add(connector); - return; - -failed_ddc: - drm_encoder_cleanup(&psb_intel_output->enc); - drm_connector_cleanup(&psb_intel_output->base); - kfree(psb_intel_output); -} diff --git a/drivers/staging/gma500/cdv_intel_lvds.c b/drivers/staging/gma500/cdv_intel_lvds.c deleted file mode 100644 index 988b2d0acf43..000000000000 --- a/drivers/staging/gma500/cdv_intel_lvds.c +++ /dev/null @@ -1,721 +0,0 @@ -/* - * Copyright © 2006-2011 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - * Dave Airlie - * Jesse Barnes - */ - -#include -#include -#include - -#include "intel_bios.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "power.h" -#include -#include "cdv_device.h" - -/** - * LVDS I2C backlight control macros - */ -#define BRIGHTNESS_MAX_LEVEL 100 -#define BRIGHTNESS_MASK 0xFF -#define BLC_I2C_TYPE 0x01 -#define BLC_PWM_TYPT 0x02 - -#define BLC_POLARITY_NORMAL 0 -#define BLC_POLARITY_INVERSE 1 - -#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE) -#define PSB_BLC_MIN_PWM_REG_FREQ (0x2) -#define PSB_BLC_PWM_PRECISION_FACTOR (10) -#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) -#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) - -struct cdv_intel_lvds_priv { - /** - * Saved LVDO output states - */ - uint32_t savePP_ON; - uint32_t savePP_OFF; - uint32_t saveLVDS; - uint32_t savePP_CONTROL; - uint32_t savePP_CYCLE; - uint32_t savePFIT_CONTROL; - uint32_t savePFIT_PGM_RATIOS; - uint32_t saveBLC_PWM_CTL; -}; - -/* - * Returns the maximum level of the backlight duty cycle field. - */ -static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 retval; - - if (gma_power_begin(dev, false)) { - retval = ((REG_READ(BLC_PWM_CTL) & - BACKLIGHT_MODULATION_FREQ_MASK) >> - BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; - - gma_power_end(dev); - } else - retval = ((dev_priv->saveBLC_PWM_CTL & - BACKLIGHT_MODULATION_FREQ_MASK) >> - BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; - - return retval; -} - -/* - * Set LVDS backlight level by I2C command - */ -static int cdv_lvds_i2c_set_brightness(struct drm_device *dev, - unsigned int level) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus; - u8 out_buf[2]; - unsigned int blc_i2c_brightness; - - struct i2c_msg msgs[] = { - { - .addr = lvds_i2c_bus->slave_addr, - .flags = 0, - .len = 2, - .buf = out_buf, - } - }; - - blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level * - BRIGHTNESS_MASK / - BRIGHTNESS_MAX_LEVEL); - - if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) - blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness; - - out_buf[0] = dev_priv->lvds_bl->brightnesscmd; - out_buf[1] = (u8)blc_i2c_brightness; - - if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1) - return 0; - - DRM_ERROR("I2C transfer error\n"); - return -1; -} - - -static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - u32 max_pwm_blc; - u32 blc_pwm_duty_cycle; - - max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev); - - /*BLC_PWM_CTL Should be initiated while backlight device init*/ - BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0); - - blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL; - - if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) - blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle; - - blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR; - REG_WRITE(BLC_PWM_CTL, - (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | - (blc_pwm_duty_cycle)); - - return 0; -} - -/* - * Set LVDS backlight level either by I2C or PWM - */ -void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - if (!dev_priv->lvds_bl) { - DRM_ERROR("NO LVDS Backlight Info\n"); - return; - } - - if (dev_priv->lvds_bl->type == BLC_I2C_TYPE) - cdv_lvds_i2c_set_brightness(dev, level); - else - cdv_lvds_pwm_set_brightness(dev, level); -} - -/** - * Sets the backlight level. - * - * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight(). - */ -static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 blc_pwm_ctl; - - if (gma_power_begin(dev, false)) { - blc_pwm_ctl = - REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; - REG_WRITE(BLC_PWM_CTL, - (blc_pwm_ctl | - (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); - gma_power_end(dev); - } else { - blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL & - ~BACKLIGHT_DUTY_CYCLE_MASK; - dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl | - (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); - } -} - -/** - * Sets the power state for the panel. - */ -static void cdv_intel_lvds_set_power(struct drm_device *dev, - struct psb_intel_output *output, bool on) -{ - u32 pp_status; - - if (!gma_power_begin(dev, true)) - return; - - if (on) { - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | - POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while ((pp_status & PP_ON) == 0); - - cdv_intel_lvds_set_backlight(dev, - output-> - mode_dev->backlight_duty_cycle); - } else { - cdv_intel_lvds_set_backlight(dev, 0); - - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & - ~POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while (pp_status & PP_ON); - } - gma_power_end(dev); -} - -static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - if (mode == DRM_MODE_DPMS_ON) - cdv_intel_lvds_set_power(dev, output, true); - else - cdv_intel_lvds_set_power(dev, output, false); - /* XXX: We never power down the LVDS pairs. */ -} - -static void cdv_intel_lvds_save(struct drm_connector *connector) -{ -} - -static void cdv_intel_lvds_restore(struct drm_connector *connector) -{ -} - -int cdv_intel_lvds_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct drm_display_mode *fixed_mode = - psb_intel_output->mode_dev->panel_fixed_mode; - - /* just in case */ - if (mode->flags & DRM_MODE_FLAG_DBLSCAN) - return MODE_NO_DBLESCAN; - - /* just in case */ - if (mode->flags & DRM_MODE_FLAG_INTERLACE) - return MODE_NO_INTERLACE; - - if (fixed_mode) { - if (mode->hdisplay > fixed_mode->hdisplay) - return MODE_PANEL; - if (mode->vdisplay > fixed_mode->vdisplay) - return MODE_PANEL; - } - return MODE_OK; -} - -bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct psb_intel_mode_device *mode_dev = - enc_to_psb_intel_output(encoder)->mode_dev; - struct drm_device *dev = encoder->dev; - struct drm_encoder *tmp_encoder; - struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode; - - /* Should never happen!! */ - list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, - head) { - if (tmp_encoder != encoder - && tmp_encoder->crtc == encoder->crtc) { - printk(KERN_ERR "Can't enable LVDS and another " - "encoder on the same pipe\n"); - return false; - } - } - - /* - * If we have timings from the BIOS for the panel, put them in - * to the adjusted mode. The CRTC will be set up for this mode, - * with the panel scaling set up to source from the H/VDisplay - * of the original mode. - */ - if (panel_fixed_mode != NULL) { - adjusted_mode->hdisplay = panel_fixed_mode->hdisplay; - adjusted_mode->hsync_start = panel_fixed_mode->hsync_start; - adjusted_mode->hsync_end = panel_fixed_mode->hsync_end; - adjusted_mode->htotal = panel_fixed_mode->htotal; - adjusted_mode->vdisplay = panel_fixed_mode->vdisplay; - adjusted_mode->vsync_start = panel_fixed_mode->vsync_start; - adjusted_mode->vsync_end = panel_fixed_mode->vsync_end; - adjusted_mode->vtotal = panel_fixed_mode->vtotal; - adjusted_mode->clock = panel_fixed_mode->clock; - drm_mode_set_crtcinfo(adjusted_mode, - CRTC_INTERLACE_HALVE_V); - } - - /* - * XXX: It would be nice to support lower refresh rates on the - * panels to reduce power consumption, and perhaps match the - * user's requested refresh rate. - */ - - return true; -} - -static void cdv_intel_lvds_prepare(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct psb_intel_mode_device *mode_dev = output->mode_dev; - - if (!gma_power_begin(dev, true)) - return; - - mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); - mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & - BACKLIGHT_DUTY_CYCLE_MASK); - - cdv_intel_lvds_set_power(dev, output, false); - - gma_power_end(dev); -} - -static void cdv_intel_lvds_commit(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct psb_intel_mode_device *mode_dev = output->mode_dev; - - if (mode_dev->backlight_duty_cycle == 0) - mode_dev->backlight_duty_cycle = - cdv_intel_lvds_get_max_backlight(dev); - - cdv_intel_lvds_set_power(dev, output, true); -} - -static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 pfit_control; - - /* - * The LVDS pin pair will already have been turned on in the - * cdv_intel_crtc_mode_set since it has a large impact on the DPLL - * settings. - */ - - /* - * Enable automatic panel scaling so that non-native modes fill the - * screen. Should be enabled before the pipe is enabled, according to - * register description and PRM. - */ - if (mode->hdisplay != adjusted_mode->hdisplay || - mode->vdisplay != adjusted_mode->vdisplay) - pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | - HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | - HORIZ_INTERP_BILINEAR); - else - pfit_control = 0; - - if (dev_priv->lvds_dither) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - - REG_WRITE(PFIT_CONTROL, pfit_control); -} - -/** - * Detect the LVDS connection. - * - * This always returns CONNECTOR_STATUS_CONNECTED. - * This connector should only have - * been set up if the LVDS was actually connected anyway. - */ -static enum drm_connector_status cdv_intel_lvds_detect( - struct drm_connector *connector, bool force) -{ - return connector_status_connected; -} - -/** - * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. - */ -static int cdv_intel_lvds_get_modes(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct psb_intel_mode_device *mode_dev = - psb_intel_output->mode_dev; - int ret; - - ret = psb_intel_ddc_get_modes(psb_intel_output); - - if (ret) - return ret; - - /* Didn't get an EDID, so - * Set wide sync ranges so we get all modes - * handed to valid_mode for checking - */ - connector->display_info.min_vfreq = 0; - connector->display_info.max_vfreq = 200; - connector->display_info.min_hfreq = 0; - connector->display_info.max_hfreq = 200; - if (mode_dev->panel_fixed_mode != NULL) { - struct drm_display_mode *mode = - drm_mode_duplicate(dev, mode_dev->panel_fixed_mode); - drm_mode_probed_add(connector, mode); - return 1; - } - - return 0; -} - -/** - * cdv_intel_lvds_destroy - unregister and free LVDS structures - * @connector: connector to free - * - * Unregister the DDC bus for this connector then free the driver private - * structure. - */ -void cdv_intel_lvds_destroy(struct drm_connector *connector) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - if (psb_intel_output->ddc_bus) - psb_intel_i2c_destroy(psb_intel_output->ddc_bus); - drm_sysfs_connector_remove(connector); - drm_connector_cleanup(connector); - kfree(connector); -} - -int cdv_intel_lvds_set_property(struct drm_connector *connector, - struct drm_property *property, - uint64_t value) -{ - struct drm_encoder *encoder = connector->encoder; - - if (!strcmp(property->name, "scaling mode") && encoder) { - struct psb_intel_crtc *crtc = - to_psb_intel_crtc(encoder->crtc); - uint64_t curValue; - - if (!crtc) - return -1; - - switch (value) { - case DRM_MODE_SCALE_FULLSCREEN: - break; - case DRM_MODE_SCALE_NO_SCALE: - break; - case DRM_MODE_SCALE_ASPECT: - break; - default: - return -1; - } - - if (drm_connector_property_get_value(connector, - property, - &curValue)) - return -1; - - if (curValue == value) - return 0; - - if (drm_connector_property_set_value(connector, - property, - value)) - return -1; - - if (crtc->saved_mode.hdisplay != 0 && - crtc->saved_mode.vdisplay != 0) { - if (!drm_crtc_helper_set_mode(encoder->crtc, - &crtc->saved_mode, - encoder->crtc->x, - encoder->crtc->y, - encoder->crtc->fb)) - return -1; - } - } else if (!strcmp(property->name, "backlight") && encoder) { - if (drm_connector_property_set_value(connector, - property, - value)) - return -1; - else { -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - struct drm_psb_private *dev_priv = - encoder->dev->dev_private; - struct backlight_device *bd = - dev_priv->backlight_device; - bd->props.brightness = value; - backlight_update_status(bd); -#endif - } - } else if (!strcmp(property->name, "DPMS") && encoder) { - struct drm_encoder_helper_funcs *helpers = - encoder->helper_private; - helpers->dpms(encoder, value); - } - return 0; -} - -static const struct drm_encoder_helper_funcs - cdv_intel_lvds_helper_funcs = { - .dpms = cdv_intel_lvds_encoder_dpms, - .mode_fixup = cdv_intel_lvds_mode_fixup, - .prepare = cdv_intel_lvds_prepare, - .mode_set = cdv_intel_lvds_mode_set, - .commit = cdv_intel_lvds_commit, -}; - -static const struct drm_connector_helper_funcs - cdv_intel_lvds_connector_helper_funcs = { - .get_modes = cdv_intel_lvds_get_modes, - .mode_valid = cdv_intel_lvds_mode_valid, - .best_encoder = psb_intel_best_encoder, -}; - -static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = { - .dpms = drm_helper_connector_dpms, - .save = cdv_intel_lvds_save, - .restore = cdv_intel_lvds_restore, - .detect = cdv_intel_lvds_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .set_property = cdv_intel_lvds_set_property, - .destroy = cdv_intel_lvds_destroy, -}; - - -static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder) -{ - drm_encoder_cleanup(encoder); -} - -const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = { - .destroy = cdv_intel_lvds_enc_destroy, -}; - -/** - * cdv_intel_lvds_init - setup LVDS connectors on this device - * @dev: drm device - * - * Create the connector, register the LVDS DDC bus, and try to figure out what - * modes we can display on the LVDS panel (if present). - */ -void cdv_intel_lvds_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev) -{ - struct psb_intel_output *psb_intel_output; - struct cdv_intel_lvds_priv *lvds_priv; - struct drm_connector *connector; - struct drm_encoder *encoder; - struct drm_display_mode *scan; - struct drm_crtc *crtc; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 lvds; - int pipe; - - psb_intel_output = kzalloc(sizeof(struct psb_intel_output) + - sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL); - if (!psb_intel_output) - return; - - lvds_priv = (struct cdv_intel_lvds_priv *)(psb_intel_output + 1); - - psb_intel_output->dev_priv = lvds_priv; - - psb_intel_output->mode_dev = mode_dev; - connector = &psb_intel_output->base; - encoder = &psb_intel_output->enc; - - - drm_connector_init(dev, &psb_intel_output->base, - &cdv_intel_lvds_connector_funcs, - DRM_MODE_CONNECTOR_LVDS); - - drm_encoder_init(dev, &psb_intel_output->enc, - &cdv_intel_lvds_enc_funcs, - DRM_MODE_ENCODER_LVDS); - - - drm_mode_connector_attach_encoder(&psb_intel_output->base, - &psb_intel_output->enc); - psb_intel_output->type = INTEL_OUTPUT_LVDS; - - drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs); - drm_connector_helper_add(connector, - &cdv_intel_lvds_connector_helper_funcs); - connector->display_info.subpixel_order = SubPixelHorizontalRGB; - connector->interlace_allowed = false; - connector->doublescan_allowed = false; - - /*Attach connector properties*/ - drm_connector_attach_property(connector, - dev->mode_config.scaling_mode_property, - DRM_MODE_SCALE_FULLSCREEN); - drm_connector_attach_property(connector, - dev_priv->backlight_property, - BRIGHTNESS_MAX_LEVEL); - - /** - * Set up I2C bus - * FIXME: distroy i2c_bus when exit - */ - psb_intel_output->i2c_bus = psb_intel_i2c_create(dev, - GPIOB, - "LVDSBLC_B"); - if (!psb_intel_output->i2c_bus) { - dev_printk(KERN_ERR, - &dev->pdev->dev, "I2C bus registration failed.\n"); - goto failed_blc_i2c; - } - psb_intel_output->i2c_bus->slave_addr = 0x2C; - dev_priv->lvds_i2c_bus = psb_intel_output->i2c_bus; - - /* - * LVDS discovery: - * 1) check for EDID on DDC - * 2) check for VBT data - * 3) check to see if LVDS is already on - * if none of the above, no panel - * 4) make sure lid is open - * if closed, act like it's not there for now - */ - - /* Set up the DDC bus. */ - psb_intel_output->ddc_bus = psb_intel_i2c_create(dev, - GPIOC, - "LVDSDDC_C"); - if (!psb_intel_output->ddc_bus) { - dev_printk(KERN_ERR, &dev->pdev->dev, - "DDC bus registration " "failed.\n"); - goto failed_ddc; - } - - /* - * Attempt to get the fixed panel mode from DDC. Assume that the - * preferred mode is the right one. - */ - psb_intel_ddc_get_modes(psb_intel_output); - list_for_each_entry(scan, &connector->probed_modes, head) { - if (scan->type & DRM_MODE_TYPE_PREFERRED) { - mode_dev->panel_fixed_mode = - drm_mode_duplicate(dev, scan); - goto out; /* FIXME: check for quirks */ - } - } - - /* Failed to get EDID, what about VBT? do we need this?*/ - if (dev_priv->lfp_lvds_vbt_mode) { - mode_dev->panel_fixed_mode = - drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); - if (mode_dev->panel_fixed_mode) { - mode_dev->panel_fixed_mode->type |= - DRM_MODE_TYPE_PREFERRED; - goto out; /* FIXME: check for quirks */ - } - } - /* - * If we didn't get EDID, try checking if the panel is already turned - * on. If so, assume that whatever is currently programmed is the - * correct mode. - */ - lvds = REG_READ(LVDS); - pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; - crtc = psb_intel_get_crtc_from_pipe(dev, pipe); - - if (crtc && (lvds & LVDS_PORT_EN)) { - mode_dev->panel_fixed_mode = - cdv_intel_crtc_mode_get(dev, crtc); - if (mode_dev->panel_fixed_mode) { - mode_dev->panel_fixed_mode->type |= - DRM_MODE_TYPE_PREFERRED; - goto out; /* FIXME: check for quirks */ - } - } - - /* If we still don't have a mode after all that, give up. */ - if (!mode_dev->panel_fixed_mode) { - DRM_DEBUG - ("Found no modes on the lvds, ignoring the LVDS\n"); - goto failed_find; - } - -out: - drm_sysfs_connector_add(connector); - return; - -failed_find: - printk(KERN_ERR "Failed find\n"); - if (psb_intel_output->ddc_bus) - psb_intel_i2c_destroy(psb_intel_output->ddc_bus); -failed_ddc: - printk(KERN_ERR "Failed DDC\n"); - if (psb_intel_output->i2c_bus) - psb_intel_i2c_destroy(psb_intel_output->i2c_bus); -failed_blc_i2c: - printk(KERN_ERR "Failed BLC\n"); - drm_encoder_cleanup(encoder); - drm_connector_cleanup(connector); - kfree(connector); -} diff --git a/drivers/staging/gma500/displays/hdmi.h b/drivers/staging/gma500/displays/hdmi.h deleted file mode 100644 index d58ba9bd010f..000000000000 --- a/drivers/staging/gma500/displays/hdmi.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe - */ - -#ifndef HDMI_H -#define HDMI_H - -extern void hdmi_init(struct drm_device *dev); - -#endif diff --git a/drivers/staging/gma500/displays/pyr_cmd.h b/drivers/staging/gma500/displays/pyr_cmd.h deleted file mode 100644 index 84bae5c8c552..000000000000 --- a/drivers/staging/gma500/displays/pyr_cmd.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe - */ - -#ifndef PYR_CMD_H -#define PYR_CMD_H - -extern void pyr_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs); - -#endif - diff --git a/drivers/staging/gma500/displays/pyr_vid.h b/drivers/staging/gma500/displays/pyr_vid.h deleted file mode 100644 index ce98860fa68a..000000000000 --- a/drivers/staging/gma500/displays/pyr_vid.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe -*/ - -#ifndef PYR_VID_H -#define PYR_VID_H - -extern void pyr_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs); -extern struct drm_display_mode *pyr_vid_get_config_mode(struct drm_device* dev); - -#endif diff --git a/drivers/staging/gma500/displays/tmd_cmd.h b/drivers/staging/gma500/displays/tmd_cmd.h deleted file mode 100644 index 641e85eedece..000000000000 --- a/drivers/staging/gma500/displays/tmd_cmd.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe - */ - -#ifndef TMD_CMD_H -#define TMD_CMD_H - -extern void tmd_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs); -extern struct drm_display_mode *tmd_cmd_get_config_mode(struct drm_device *dev); - -#endif diff --git a/drivers/staging/gma500/displays/tmd_vid.h b/drivers/staging/gma500/displays/tmd_vid.h deleted file mode 100644 index 7a5fa3b935e3..000000000000 --- a/drivers/staging/gma500/displays/tmd_vid.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe -*/ - -#ifndef TMD_VID_H -#define TMD_VID_H - -extern void tmd_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs); -extern struct drm_display_mode *tmd_vid_get_config_mode(struct drm_device *dev); - -#endif diff --git a/drivers/staging/gma500/displays/tpo_cmd.h b/drivers/staging/gma500/displays/tpo_cmd.h deleted file mode 100644 index 610552730d71..000000000000 --- a/drivers/staging/gma500/displays/tpo_cmd.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe -*/ - -#ifndef TPO_CMD_H -#define TPO_CMD_H - -extern void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs); -/* extern struct drm_display_mode * */ -/* tpo_cmd_get_config_mode(struct drm_device *dev); */ - -#endif diff --git a/drivers/staging/gma500/displays/tpo_vid.h b/drivers/staging/gma500/displays/tpo_vid.h deleted file mode 100644 index c24f05722de1..000000000000 --- a/drivers/staging/gma500/displays/tpo_vid.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe - */ - -#ifndef TPO_VID_H -#define TPO_VID_H - -extern void tpo_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs); - -#endif diff --git a/drivers/staging/gma500/framebuffer.c b/drivers/staging/gma500/framebuffer.c deleted file mode 100644 index b00761cba144..000000000000 --- a/drivers/staging/gma500/framebuffer.c +++ /dev/null @@ -1,856 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007-2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "psb_drv.h" -#include "psb_intel_reg.h" -#include "psb_intel_drv.h" -#include "framebuffer.h" -#include "gtt.h" - -#include "mdfld_output.h" - -static void psb_user_framebuffer_destroy(struct drm_framebuffer *fb); -static int psb_user_framebuffer_create_handle(struct drm_framebuffer *fb, - struct drm_file *file_priv, - unsigned int *handle); - -static const struct drm_framebuffer_funcs psb_fb_funcs = { - .destroy = psb_user_framebuffer_destroy, - .create_handle = psb_user_framebuffer_create_handle, -}; - -#define CMAP_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16) - -static int psbfb_setcolreg(unsigned regno, unsigned red, unsigned green, - unsigned blue, unsigned transp, - struct fb_info *info) -{ - struct psb_fbdev *fbdev = info->par; - struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb; - uint32_t v; - - if (!fb) - return -ENOMEM; - - if (regno > 255) - return 1; - - red = CMAP_TOHW(red, info->var.red.length); - blue = CMAP_TOHW(blue, info->var.blue.length); - green = CMAP_TOHW(green, info->var.green.length); - transp = CMAP_TOHW(transp, info->var.transp.length); - - v = (red << info->var.red.offset) | - (green << info->var.green.offset) | - (blue << info->var.blue.offset) | - (transp << info->var.transp.offset); - - if (regno < 16) { - switch (fb->bits_per_pixel) { - case 16: - ((uint32_t *) info->pseudo_palette)[regno] = v; - break; - case 24: - case 32: - ((uint32_t *) info->pseudo_palette)[regno] = v; - break; - } - } - - return 0; -} - -static int psbfb_pan(struct fb_var_screeninfo *var, struct fb_info *info) -{ - struct psb_fbdev *fbdev = info->par; - struct psb_framebuffer *psbfb = &fbdev->pfb; - struct drm_device *dev = psbfb->base.dev; - - /* - * We have to poke our nose in here. The core fb code assumes - * panning is part of the hardware that can be invoked before - * the actual fb is mapped. In our case that isn't quite true. - */ - if (psbfb->gtt->npage) - psb_gtt_roll(dev, psbfb->gtt, var->yoffset); - return 0; -} - -void psbfb_suspend(struct drm_device *dev) -{ - struct drm_framebuffer *fb = 0; - struct psb_framebuffer *psbfb = to_psb_fb(fb); - - console_lock(); - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(fb, &dev->mode_config.fb_list, head) { - struct fb_info *info = psbfb->fbdev; - fb_set_suspend(info, 1); - drm_fb_helper_blank(FB_BLANK_POWERDOWN, info); - } - mutex_unlock(&dev->mode_config.mutex); - console_unlock(); -} - -void psbfb_resume(struct drm_device *dev) -{ - struct drm_framebuffer *fb = 0; - struct psb_framebuffer *psbfb = to_psb_fb(fb); - - console_lock(); - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(fb, &dev->mode_config.fb_list, head) { - struct fb_info *info = psbfb->fbdev; - fb_set_suspend(info, 0); - drm_fb_helper_blank(FB_BLANK_UNBLANK, info); - } - mutex_unlock(&dev->mode_config.mutex); - console_unlock(); - drm_helper_disable_unused_functions(dev); -} - -static int psbfb_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) -{ - struct psb_framebuffer *psbfb = vma->vm_private_data; - struct drm_device *dev = psbfb->base.dev; - struct drm_psb_private *dev_priv = dev->dev_private; - int page_num; - int i; - unsigned long address; - int ret; - unsigned long pfn; - /* FIXME: assumes fb at stolen base which may not be true */ - unsigned long phys_addr = (unsigned long)dev_priv->stolen_base; - - page_num = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; - address = (unsigned long)vmf->virtual_address; - - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - - for (i = 0; i < page_num; i++) { - pfn = (phys_addr >> PAGE_SHIFT); - - ret = vm_insert_mixed(vma, address, pfn); - if (unlikely((ret == -EBUSY) || (ret != 0 && i > 0))) - break; - else if (unlikely(ret != 0)) { - ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS; - return ret; - } - address += PAGE_SIZE; - phys_addr += PAGE_SIZE; - } - return VM_FAULT_NOPAGE; -} - -static void psbfb_vm_open(struct vm_area_struct *vma) -{ -} - -static void psbfb_vm_close(struct vm_area_struct *vma) -{ -} - -static struct vm_operations_struct psbfb_vm_ops = { - .fault = psbfb_vm_fault, - .open = psbfb_vm_open, - .close = psbfb_vm_close -}; - -static int psbfb_mmap(struct fb_info *info, struct vm_area_struct *vma) -{ - struct psb_fbdev *fbdev = info->par; - struct psb_framebuffer *psbfb = &fbdev->pfb; - - if (vma->vm_pgoff != 0) - return -EINVAL; - if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) - return -EINVAL; - - if (!psbfb->addr_space) - psbfb->addr_space = vma->vm_file->f_mapping; - /* - * If this is a GEM object then info->screen_base is the virtual - * kernel remapping of the object. FIXME: Review if this is - * suitable for our mmap work - */ - vma->vm_ops = &psbfb_vm_ops; - vma->vm_private_data = (void *)psbfb; - vma->vm_flags |= VM_RESERVED | VM_IO | - VM_MIXEDMAP | VM_DONTEXPAND; - return 0; -} - -static int psbfb_ioctl(struct fb_info *info, unsigned int cmd, - unsigned long arg) -{ - return -ENOTTY; -} - -static struct fb_ops psbfb_ops = { - .owner = THIS_MODULE, - .fb_check_var = drm_fb_helper_check_var, - .fb_set_par = drm_fb_helper_set_par, - .fb_blank = drm_fb_helper_blank, - .fb_setcolreg = psbfb_setcolreg, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = psbfb_copyarea, - .fb_imageblit = cfb_imageblit, - .fb_mmap = psbfb_mmap, - .fb_sync = psbfb_sync, - .fb_ioctl = psbfb_ioctl, -}; - -static struct fb_ops psbfb_roll_ops = { - .owner = THIS_MODULE, - .fb_check_var = drm_fb_helper_check_var, - .fb_set_par = drm_fb_helper_set_par, - .fb_blank = drm_fb_helper_blank, - .fb_setcolreg = psbfb_setcolreg, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, - .fb_pan_display = psbfb_pan, - .fb_mmap = psbfb_mmap, - .fb_sync = psbfb_sync, - .fb_ioctl = psbfb_ioctl, -}; - -static struct fb_ops psbfb_unaccel_ops = { - .owner = THIS_MODULE, - .fb_check_var = drm_fb_helper_check_var, - .fb_set_par = drm_fb_helper_set_par, - .fb_blank = drm_fb_helper_blank, - .fb_setcolreg = psbfb_setcolreg, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, - .fb_mmap = psbfb_mmap, - .fb_ioctl = psbfb_ioctl, -}; - -/** - * psb_framebuffer_init - initialize a framebuffer - * @dev: our DRM device - * @fb: framebuffer to set up - * @mode_cmd: mode description - * @gt: backing object - * - * Configure and fill in the boilerplate for our frame buffer. Return - * 0 on success or an error code if we fail. - */ -static int psb_framebuffer_init(struct drm_device *dev, - struct psb_framebuffer *fb, - struct drm_mode_fb_cmd2 *mode_cmd, - struct gtt_range *gt) -{ - u32 bpp, depth; - int ret; - - drm_fb_get_bpp_depth(mode_cmd->pixel_format, &depth, &bpp); - - if (mode_cmd->pitches[0] & 63) - return -EINVAL; - switch (bpp) { - case 8: - case 16: - case 24: - case 32: - break; - default: - return -EINVAL; - } - ret = drm_framebuffer_init(dev, &fb->base, &psb_fb_funcs); - if (ret) { - dev_err(dev->dev, "framebuffer init failed: %d\n", ret); - return ret; - } - drm_helper_mode_fill_fb_struct(&fb->base, mode_cmd); - fb->gtt = gt; - return 0; -} - -/** - * psb_framebuffer_create - create a framebuffer backed by gt - * @dev: our DRM device - * @mode_cmd: the description of the requested mode - * @gt: the backing object - * - * Create a framebuffer object backed by the gt, and fill in the - * boilerplate required - * - * TODO: review object references - */ - -static struct drm_framebuffer *psb_framebuffer_create - (struct drm_device *dev, - struct drm_mode_fb_cmd2 *mode_cmd, - struct gtt_range *gt) -{ - struct psb_framebuffer *fb; - int ret; - - fb = kzalloc(sizeof(*fb), GFP_KERNEL); - if (!fb) - return ERR_PTR(-ENOMEM); - - ret = psb_framebuffer_init(dev, fb, mode_cmd, gt); - if (ret) { - kfree(fb); - return ERR_PTR(ret); - } - return &fb->base; -} - -/** - * psbfb_alloc - allocate frame buffer memory - * @dev: the DRM device - * @aligned_size: space needed - * @force: fall back to GEM buffers if need be - * - * Allocate the frame buffer. In the usual case we get a GTT range that - * is stolen memory backed and life is simple. If there isn't sufficient - * stolen memory or the system has no stolen memory we allocate a range - * and back it with a GEM object. - * - * In this case the GEM object has no handle. - */ -static struct gtt_range *psbfb_alloc(struct drm_device *dev, - int aligned_size, int force) -{ - struct gtt_range *backing; - /* Begin by trying to use stolen memory backing */ - backing = psb_gtt_alloc_range(dev, aligned_size, "fb", 1); - if (backing) { - if (drm_gem_private_object_init(dev, - &backing->gem, aligned_size) == 0) - return backing; - psb_gtt_free_range(dev, backing); - } - if (!force) - return NULL; - - /* Next try using GEM host memory */ - backing = psb_gtt_alloc_range(dev, aligned_size, "fb(gem)", 0); - if (backing == NULL) - return NULL; - - /* Now back it with an object */ - if (drm_gem_object_init(dev, &backing->gem, aligned_size) != 0) { - psb_gtt_free_range(dev, backing); - return NULL; - } - return backing; -} - -/** - * psbfb_create - create a framebuffer - * @fbdev: the framebuffer device - * @sizes: specification of the layout - * - * Create a framebuffer to the specifications provided - */ -static int psbfb_create(struct psb_fbdev *fbdev, - struct drm_fb_helper_surface_size *sizes) -{ - struct drm_device *dev = fbdev->psb_fb_helper.dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct fb_info *info; - struct drm_framebuffer *fb; - struct psb_framebuffer *psbfb = &fbdev->pfb; - struct drm_mode_fb_cmd2 mode_cmd; - struct device *device = &dev->pdev->dev; - int size; - int ret; - struct gtt_range *backing; - int gtt_roll = 1; - u32 bpp, depth; - - mode_cmd.width = sizes->surface_width; - mode_cmd.height = sizes->surface_height; - bpp = sizes->surface_bpp; - - /* No 24bit packed */ - if (bpp == 24) - bpp = 32; - - /* Acceleration via the GTT requires pitch to be 4096 byte aligned - (ie 1024 or 2048 pixels in normal use) */ - mode_cmd.pitches[0] = ALIGN(mode_cmd.width * ((bpp + 7) / 8), 4096); - depth = sizes->surface_depth; - - size = mode_cmd.pitches[0] * mode_cmd.height; - size = ALIGN(size, PAGE_SIZE); - - /* Allocate the framebuffer in the GTT with stolen page backing */ - backing = psbfb_alloc(dev, size, 0); - if (backing == NULL) { - /* - * We couldn't get the space we wanted, fall back to the - * display engine requirement instead. The HW requires - * the pitch to be 64 byte aligned - */ - - gtt_roll = 0; /* Don't use GTT accelerated scrolling */ - - mode_cmd.pitches[0] = ALIGN(mode_cmd.width * ((bpp + 7) / 8), 64); - depth = sizes->surface_depth; - - size = mode_cmd.pitches[0] * mode_cmd.height; - size = ALIGN(size, PAGE_SIZE); - - /* Allocate the framebuffer in the GTT with stolen page - backing when there is room */ - backing = psbfb_alloc(dev, size, 1); - if (backing == NULL) - return -ENOMEM; - } - - mutex_lock(&dev->struct_mutex); - - info = framebuffer_alloc(0, device); - if (!info) { - ret = -ENOMEM; - goto out_err1; - } - info->par = fbdev; - - mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); - - ret = psb_framebuffer_init(dev, psbfb, &mode_cmd, backing); - if (ret) - goto out_unref; - - fb = &psbfb->base; - psbfb->fbdev = info; - - fbdev->psb_fb_helper.fb = fb; - fbdev->psb_fb_helper.fbdev = info; - - strcpy(info->fix.id, "psbfb"); - - info->flags = FBINFO_DEFAULT; - if (gtt_roll) { /* GTT rolling seems best */ - info->fbops = &psbfb_roll_ops; - info->flags |= FBINFO_HWACCEL_YPAN; - } - else if (dev_priv->ops->accel_2d) /* 2D engine */ - info->fbops = &psbfb_ops; - else /* Software */ - info->fbops = &psbfb_unaccel_ops; - - ret = fb_alloc_cmap(&info->cmap, 256, 0); - if (ret) { - ret = -ENOMEM; - goto out_unref; - } - - info->fix.smem_start = dev->mode_config.fb_base; - info->fix.smem_len = size; - info->fix.ywrapstep = gtt_roll; - info->fix.ypanstep = gtt_roll; - - if (backing->stolen) { - /* Accessed stolen memory directly */ - info->screen_base = (char *)dev_priv->vram_addr + - backing->offset; - } else { - /* Pin the pages into the GTT and create a mapping to them */ - psb_gtt_pin(backing); - info->screen_base = vm_map_ram(backing->pages, backing->npage, - -1, PAGE_KERNEL); - if (info->screen_base == NULL) { - psb_gtt_unpin(backing); - ret = -ENOMEM; - goto out_unref; - } - psbfb->vm_map = 1; - } - info->screen_size = size; - - if (dev_priv->gtt.stolen_size) { - info->apertures = alloc_apertures(1); - if (!info->apertures) { - ret = -ENOMEM; - goto out_unref; - } - info->apertures->ranges[0].base = dev->mode_config.fb_base; - info->apertures->ranges[0].size = dev_priv->gtt.stolen_size; - } - - drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth); - drm_fb_helper_fill_var(info, &fbdev->psb_fb_helper, - sizes->fb_width, sizes->fb_height); - - info->fix.mmio_start = pci_resource_start(dev->pdev, 0); - info->fix.mmio_len = pci_resource_len(dev->pdev, 0); - - info->pixmap.size = 64 * 1024; - info->pixmap.buf_align = 8; - info->pixmap.access_align = 32; - info->pixmap.flags = FB_PIXMAP_SYSTEM; - info->pixmap.scan_align = 1; - - dev_info(dev->dev, "allocated %dx%d fb\n", - psbfb->base.width, psbfb->base.height); - - mutex_unlock(&dev->struct_mutex); - return 0; -out_unref: - if (backing->stolen) - psb_gtt_free_range(dev, backing); - else { - if (psbfb->vm_map) - vm_unmap_ram(info->screen_base, backing->npage); - drm_gem_object_unreference(&backing->gem); - } -out_err1: - mutex_unlock(&dev->struct_mutex); - psb_gtt_free_range(dev, backing); - return ret; -} - -/** - * psb_user_framebuffer_create - create framebuffer - * @dev: our DRM device - * @filp: client file - * @cmd: mode request - * - * Create a new framebuffer backed by a userspace GEM object - */ -static struct drm_framebuffer *psb_user_framebuffer_create - (struct drm_device *dev, struct drm_file *filp, - struct drm_mode_fb_cmd2 *cmd) -{ - struct gtt_range *r; - struct drm_gem_object *obj; - - /* - * Find the GEM object and thus the gtt range object that is - * to back this space - */ - obj = drm_gem_object_lookup(dev, filp, cmd->handles[0]); - if (obj == NULL) - return ERR_PTR(-ENOENT); - - /* Let the core code do all the work */ - r = container_of(obj, struct gtt_range, gem); - return psb_framebuffer_create(dev, cmd, r); -} - -static void psbfb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, - u16 blue, int regno) -{ -} - -static void psbfb_gamma_get(struct drm_crtc *crtc, u16 *red, - u16 *green, u16 *blue, int regno) -{ -} - -static int psbfb_probe(struct drm_fb_helper *helper, - struct drm_fb_helper_surface_size *sizes) -{ - struct psb_fbdev *psb_fbdev = (struct psb_fbdev *)helper; - int new_fb = 0; - int ret; - - if (!helper->fb) { - ret = psbfb_create(psb_fbdev, sizes); - if (ret) - return ret; - new_fb = 1; - } - return new_fb; -} - -struct drm_fb_helper_funcs psb_fb_helper_funcs = { - .gamma_set = psbfb_gamma_set, - .gamma_get = psbfb_gamma_get, - .fb_probe = psbfb_probe, -}; - -int psb_fbdev_destroy(struct drm_device *dev, struct psb_fbdev *fbdev) -{ - struct fb_info *info; - struct psb_framebuffer *psbfb = &fbdev->pfb; - - if (fbdev->psb_fb_helper.fbdev) { - info = fbdev->psb_fb_helper.fbdev; - - /* If this is our base framebuffer then kill any virtual map - for the framebuffer layer and unpin it */ - if (psbfb->vm_map) { - vm_unmap_ram(info->screen_base, psbfb->gtt->npage); - psb_gtt_unpin(psbfb->gtt); - } - unregister_framebuffer(info); - if (info->cmap.len) - fb_dealloc_cmap(&info->cmap); - framebuffer_release(info); - } - drm_fb_helper_fini(&fbdev->psb_fb_helper); - drm_framebuffer_cleanup(&psbfb->base); - - if (psbfb->gtt) - drm_gem_object_unreference(&psbfb->gtt->gem); - return 0; -} - -int psb_fbdev_init(struct drm_device *dev) -{ - struct psb_fbdev *fbdev; - struct drm_psb_private *dev_priv = dev->dev_private; - - fbdev = kzalloc(sizeof(struct psb_fbdev), GFP_KERNEL); - if (!fbdev) { - dev_err(dev->dev, "no memory\n"); - return -ENOMEM; - } - - dev_priv->fbdev = fbdev; - fbdev->psb_fb_helper.funcs = &psb_fb_helper_funcs; - - drm_fb_helper_init(dev, &fbdev->psb_fb_helper, dev_priv->ops->crtcs, - INTELFB_CONN_LIMIT); - - drm_fb_helper_single_add_all_connectors(&fbdev->psb_fb_helper); - drm_fb_helper_initial_config(&fbdev->psb_fb_helper, 32); - return 0; -} - -void psb_fbdev_fini(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - if (!dev_priv->fbdev) - return; - - psb_fbdev_destroy(dev, dev_priv->fbdev); - kfree(dev_priv->fbdev); - dev_priv->fbdev = NULL; -} - -static void psbfb_output_poll_changed(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_fbdev *fbdev = (struct psb_fbdev *)dev_priv->fbdev; - drm_fb_helper_hotplug_event(&fbdev->psb_fb_helper); -} - -/** - * psb_user_framebuffer_create_handle - add hamdle to a framebuffer - * @fb: framebuffer - * @file_priv: our DRM file - * @handle: returned handle - * - * Our framebuffer object is a GTT range which also contains a GEM - * object. We need to turn it into a handle for userspace. GEM will do - * the work for us - */ -static int psb_user_framebuffer_create_handle(struct drm_framebuffer *fb, - struct drm_file *file_priv, - unsigned int *handle) -{ - struct psb_framebuffer *psbfb = to_psb_fb(fb); - struct gtt_range *r = psbfb->gtt; - return drm_gem_handle_create(file_priv, &r->gem, handle); -} - -/** - * psb_user_framebuffer_destroy - destruct user created fb - * @fb: framebuffer - * - * User framebuffers are backed by GEM objects so all we have to do is - * clean up a bit and drop the reference, GEM will handle the fallout - */ -static void psb_user_framebuffer_destroy(struct drm_framebuffer *fb) -{ - struct psb_framebuffer *psbfb = to_psb_fb(fb); - struct gtt_range *r = psbfb->gtt; - struct drm_device *dev = fb->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_fbdev *fbdev = dev_priv->fbdev; - struct drm_crtc *crtc; - int reset = 0; - - /* Should never get stolen memory for a user fb */ - WARN_ON(r->stolen); - - /* Check if we are erroneously live */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) - if (crtc->fb == fb) - reset = 1; - - if (reset) - /* - * Now force a sane response before we permit the DRM CRTC - * layer to do stupid things like blank the display. Instead - * we reset this framebuffer as if the user had forced a reset. - * We must do this before the cleanup so that the DRM layer - * doesn't get a chance to stick its oar in where it isn't - * wanted. - */ - drm_fb_helper_restore_fbdev_mode(&fbdev->psb_fb_helper); - - /* Let DRM do its clean up */ - drm_framebuffer_cleanup(fb); - /* We are no longer using the resource in GEM */ - drm_gem_object_unreference_unlocked(&r->gem); - kfree(fb); -} - -static const struct drm_mode_config_funcs psb_mode_funcs = { - .fb_create = psb_user_framebuffer_create, - .output_poll_changed = psbfb_output_poll_changed, -}; - -static int psb_create_backlight_property(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_property *backlight; - - if (dev_priv->backlight_property) - return 0; - - backlight = drm_property_create(dev, DRM_MODE_PROP_RANGE, - "backlight", 2); - backlight->values[0] = 0; - backlight->values[1] = 100; - - dev_priv->backlight_property = backlight; - - return 0; -} - -static void psb_setup_outputs(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_connector *connector; - - drm_mode_create_scaling_mode_property(dev); - psb_create_backlight_property(dev); - - dev_priv->ops->output_init(dev); - - list_for_each_entry(connector, &dev->mode_config.connector_list, - head) { - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct drm_encoder *encoder = &psb_intel_output->enc; - int crtc_mask = 0, clone_mask = 0; - - /* valid crtcs */ - switch (psb_intel_output->type) { - case INTEL_OUTPUT_ANALOG: - crtc_mask = (1 << 0); - clone_mask = (1 << INTEL_OUTPUT_ANALOG); - break; - case INTEL_OUTPUT_SDVO: - crtc_mask = ((1 << 0) | (1 << 1)); - clone_mask = (1 << INTEL_OUTPUT_SDVO); - break; - case INTEL_OUTPUT_LVDS: - if (IS_MRST(dev)) - crtc_mask = (1 << 0); - else - crtc_mask = (1 << 1); - clone_mask = (1 << INTEL_OUTPUT_LVDS); - break; - case INTEL_OUTPUT_MIPI: - crtc_mask = (1 << 0); - clone_mask = (1 << INTEL_OUTPUT_MIPI); - break; - case INTEL_OUTPUT_MIPI2: - crtc_mask = (1 << 2); - clone_mask = (1 << INTEL_OUTPUT_MIPI2); - break; - case INTEL_OUTPUT_HDMI: - /* HDMI on crtc 1 for SoC devices and crtc 0 for - Cedarview. HDMI on Poulsbo is only via external - logic */ - if (IS_MFLD(dev) || IS_MRST(dev)) - crtc_mask = (1 << 1); - else - crtc_mask = (1 << 0); /* Cedarview */ - clone_mask = (1 << INTEL_OUTPUT_HDMI); - break; - } - encoder->possible_crtcs = crtc_mask; - encoder->possible_clones = - psb_intel_connector_clones(dev, clone_mask); - } -} - -void psb_modeset_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; - int i; - - drm_mode_config_init(dev); - - dev->mode_config.min_width = 0; - dev->mode_config.min_height = 0; - - dev->mode_config.funcs = (void *) &psb_mode_funcs; - - /* set memory base */ - /* MRST and PSB should use BAR 2*/ - pci_read_config_dword(dev->pdev, PSB_BSM, (u32 *) - &(dev->mode_config.fb_base)); - - /* num pipes is 2 for PSB but 1 for Mrst */ - for (i = 0; i < dev_priv->num_pipe; i++) - psb_intel_crtc_init(dev, i, mode_dev); - - dev->mode_config.max_width = 2048; - dev->mode_config.max_height = 2048; - - psb_setup_outputs(dev); -} - -void psb_modeset_cleanup(struct drm_device *dev) -{ - mutex_lock(&dev->struct_mutex); - - drm_kms_helper_poll_fini(dev); - psb_fbdev_fini(dev); - drm_mode_config_cleanup(dev); - - mutex_unlock(&dev->struct_mutex); -} diff --git a/drivers/staging/gma500/framebuffer.h b/drivers/staging/gma500/framebuffer.h deleted file mode 100644 index d1b2289447f0..000000000000 --- a/drivers/staging/gma500/framebuffer.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (c) 2008-2011, Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - * - */ - -#ifndef _FRAMEBUFFER_H_ -#define _FRAMEBUFFER_H_ - -#include -#include - -#include "psb_drv.h" - -struct psb_framebuffer { - struct drm_framebuffer base; - struct address_space *addr_space; - struct fb_info *fbdev; - struct gtt_range *gtt; - bool vm_map; /* True if we must undo a vm_map_ram */ -}; - -struct psb_fbdev { - struct drm_fb_helper psb_fb_helper; - struct psb_framebuffer pfb; -}; - -#define to_psb_fb(x) container_of(x, struct psb_framebuffer, base) - -extern int psb_intel_connector_clones(struct drm_device *dev, int type_mask); - -#endif - diff --git a/drivers/staging/gma500/gem.c b/drivers/staging/gma500/gem.c deleted file mode 100644 index f6433c037d24..000000000000 --- a/drivers/staging/gma500/gem.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * psb GEM interface - * - * Copyright (c) 2011, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: Alan Cox - * - * TODO: - * - we need to work out if the MMU is relevant (eg for - * accelerated operations on a GEM object) - */ - -#include -#include -#include "psb_drm.h" -#include "psb_drv.h" - -int psb_gem_init_object(struct drm_gem_object *obj) -{ - return -EINVAL; -} - -void psb_gem_free_object(struct drm_gem_object *obj) -{ - struct gtt_range *gtt = container_of(obj, struct gtt_range, gem); - drm_gem_object_release_wrap(obj); - /* This must occur last as it frees up the memory of the GEM object */ - psb_gtt_free_range(obj->dev, gtt); -} - -int psb_gem_get_aperture(struct drm_device *dev, void *data, - struct drm_file *file) -{ - return -EINVAL; -} - -/** - * psb_gem_dumb_map_gtt - buffer mapping for dumb interface - * @file: our drm client file - * @dev: drm device - * @handle: GEM handle to the object (from dumb_create) - * - * Do the necessary setup to allow the mapping of the frame buffer - * into user memory. We don't have to do much here at the moment. - */ -int psb_gem_dumb_map_gtt(struct drm_file *file, struct drm_device *dev, - uint32_t handle, uint64_t *offset) -{ - int ret = 0; - struct drm_gem_object *obj; - - if (!(dev->driver->driver_features & DRIVER_GEM)) - return -ENODEV; - - mutex_lock(&dev->struct_mutex); - - /* GEM does all our handle to object mapping */ - obj = drm_gem_object_lookup(dev, file, handle); - if (obj == NULL) { - ret = -ENOENT; - goto unlock; - } - /* What validation is needed here ? */ - - /* Make it mmapable */ - if (!obj->map_list.map) { - ret = gem_create_mmap_offset(obj); - if (ret) - goto out; - } - /* GEM should really work out the hash offsets for us */ - *offset = (u64)obj->map_list.hash.key << PAGE_SHIFT; -out: - drm_gem_object_unreference(obj); -unlock: - mutex_unlock(&dev->struct_mutex); - return ret; -} - -/** - * psb_gem_create - create a mappable object - * @file: the DRM file of the client - * @dev: our device - * @size: the size requested - * @handlep: returned handle (opaque number) - * - * Create a GEM object, fill in the boilerplate and attach a handle to - * it so that userspace can speak about it. This does the core work - * for the various methods that do/will create GEM objects for things - */ -static int psb_gem_create(struct drm_file *file, - struct drm_device *dev, uint64_t size, uint32_t *handlep) -{ - struct gtt_range *r; - int ret; - u32 handle; - - size = roundup(size, PAGE_SIZE); - - /* Allocate our object - for now a direct gtt range which is not - stolen memory backed */ - r = psb_gtt_alloc_range(dev, size, "gem", 0); - if (r == NULL) { - dev_err(dev->dev, "no memory for %lld byte GEM object\n", size); - return -ENOSPC; - } - /* Initialize the extra goodies GEM needs to do all the hard work */ - if (drm_gem_object_init(dev, &r->gem, size) != 0) { - psb_gtt_free_range(dev, r); - /* GEM doesn't give an error code so use -ENOMEM */ - dev_err(dev->dev, "GEM init failed for %lld\n", size); - return -ENOMEM; - } - /* Give the object a handle so we can carry it more easily */ - ret = drm_gem_handle_create(file, &r->gem, &handle); - if (ret) { - dev_err(dev->dev, "GEM handle failed for %p, %lld\n", - &r->gem, size); - drm_gem_object_release(&r->gem); - psb_gtt_free_range(dev, r); - return ret; - } - /* We have the initial and handle reference but need only one now */ - drm_gem_object_unreference(&r->gem); - *handlep = handle; - return 0; -} - -/** - * psb_gem_dumb_create - create a dumb buffer - * @drm_file: our client file - * @dev: our device - * @args: the requested arguments copied from userspace - * - * Allocate a buffer suitable for use for a frame buffer of the - * form described by user space. Give userspace a handle by which - * to reference it. - */ -int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev, - struct drm_mode_create_dumb *args) -{ - args->pitch = ALIGN(args->width * ((args->bpp + 7) / 8), 64); - args->size = args->pitch * args->height; - return psb_gem_create(file, dev, args->size, &args->handle); -} - -/** - * psb_gem_dumb_destroy - destroy a dumb buffer - * @file: client file - * @dev: our DRM device - * @handle: the object handle - * - * Destroy a handle that was created via psb_gem_dumb_create, at least - * we hope it was created that way. i915 seems to assume the caller - * does the checking but that might be worth review ! FIXME - */ -int psb_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev, - uint32_t handle) -{ - /* No special work needed, drop the reference and see what falls out */ - return drm_gem_handle_delete(file, handle); -} - -/** - * psb_gem_fault - pagefault handler for GEM objects - * @vma: the VMA of the GEM object - * @vmf: fault detail - * - * Invoked when a fault occurs on an mmap of a GEM managed area. GEM - * does most of the work for us including the actual map/unmap calls - * but we need to do the actual page work. - * - * This code eventually needs to handle faulting objects in and out - * of the GTT and repacking it when we run out of space. We can put - * that off for now and for our simple uses - * - * The VMA was set up by GEM. In doing so it also ensured that the - * vma->vm_private_data points to the GEM object that is backing this - * mapping. - */ -int psb_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) -{ - struct drm_gem_object *obj; - struct gtt_range *r; - int ret; - unsigned long pfn; - pgoff_t page_offset; - struct drm_device *dev; - struct drm_psb_private *dev_priv; - - obj = vma->vm_private_data; /* GEM object */ - dev = obj->dev; - dev_priv = dev->dev_private; - - r = container_of(obj, struct gtt_range, gem); /* Get the gtt range */ - - /* Make sure we don't parallel update on a fault, nor move or remove - something from beneath our feet */ - mutex_lock(&dev->struct_mutex); - - /* For now the mmap pins the object and it stays pinned. As things - stand that will do us no harm */ - if (r->mmapping == 0) { - ret = psb_gtt_pin(r); - if (ret < 0) { - dev_err(dev->dev, "gma500: pin failed: %d\n", ret); - goto fail; - } - r->mmapping = 1; - } - - /* Page relative to the VMA start - we must calculate this ourselves - because vmf->pgoff is the fake GEM offset */ - page_offset = ((unsigned long) vmf->virtual_address - vma->vm_start) - >> PAGE_SHIFT; - - /* CPU view of the page, don't go via the GART for CPU writes */ - if (r->stolen) - pfn = (dev_priv->stolen_base + r->offset) >> PAGE_SHIFT; - else - pfn = page_to_pfn(r->pages[page_offset]); - ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn); - -fail: - mutex_unlock(&dev->struct_mutex); - switch (ret) { - case 0: - case -ERESTARTSYS: - case -EINTR: - return VM_FAULT_NOPAGE; - case -ENOMEM: - return VM_FAULT_OOM; - default: - return VM_FAULT_SIGBUS; - } -} - -static int psb_gem_create_stolen(struct drm_file *file, struct drm_device *dev, - int size, u32 *handle) -{ - struct gtt_range *gtt = psb_gtt_alloc_range(dev, size, "gem", 1); - if (gtt == NULL) - return -ENOMEM; - if (drm_gem_private_object_init(dev, >t->gem, size) != 0) - goto free_gtt; - if (drm_gem_handle_create(file, >t->gem, handle) == 0) - return 0; -free_gtt: - psb_gtt_free_range(dev, gtt); - return -ENOMEM; -} - -/* - * GEM interfaces for our specific client - */ -int psb_gem_create_ioctl(struct drm_device *dev, void *data, - struct drm_file *file) -{ - struct drm_psb_gem_create *args = data; - int ret; - if (args->flags & PSB_GEM_CREATE_STOLEN) { - ret = psb_gem_create_stolen(file, dev, args->size, - &args->handle); - if (ret == 0) - return 0; - /* Fall throguh */ - args->flags &= ~PSB_GEM_CREATE_STOLEN; - } - return psb_gem_create(file, dev, args->size, &args->handle); -} - -int psb_gem_mmap_ioctl(struct drm_device *dev, void *data, - struct drm_file *file) -{ - struct drm_psb_gem_mmap *args = data; - return dev->driver->dumb_map_offset(file, dev, - args->handle, &args->offset); -} - diff --git a/drivers/staging/gma500/gem_glue.c b/drivers/staging/gma500/gem_glue.c deleted file mode 100644 index daac12120653..000000000000 --- a/drivers/staging/gma500/gem_glue.c +++ /dev/null @@ -1,89 +0,0 @@ -/************************************************************************** - * Copyright (c) 2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#include -#include - -void drm_gem_object_release_wrap(struct drm_gem_object *obj) -{ - /* Remove the list map if one is present */ - if (obj->map_list.map) { - struct drm_gem_mm *mm = obj->dev->mm_private; - struct drm_map_list *list = &obj->map_list; - drm_ht_remove_item(&mm->offset_hash, &list->hash); - drm_mm_put_block(list->file_offset_node); - kfree(list->map); - list->map = NULL; - } - drm_gem_object_release(obj); -} - -/** - * gem_create_mmap_offset - invent an mmap offset - * @obj: our object - * - * Standard implementation of offset generation for mmap as is - * duplicated in several drivers. This belongs in GEM. - */ -int gem_create_mmap_offset(struct drm_gem_object *obj) -{ - struct drm_device *dev = obj->dev; - struct drm_gem_mm *mm = dev->mm_private; - struct drm_map_list *list; - struct drm_local_map *map; - int ret; - - list = &obj->map_list; - list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL); - if (list->map == NULL) - return -ENOMEM; - map = list->map; - map->type = _DRM_GEM; - map->size = obj->size; - map->handle = obj; - - list->file_offset_node = drm_mm_search_free(&mm->offset_manager, - obj->size / PAGE_SIZE, 0, 0); - if (!list->file_offset_node) { - dev_err(dev->dev, "failed to allocate offset for bo %d\n", - obj->name); - ret = -ENOSPC; - goto free_it; - } - list->file_offset_node = drm_mm_get_block(list->file_offset_node, - obj->size / PAGE_SIZE, 0); - if (!list->file_offset_node) { - ret = -ENOMEM; - goto free_it; - } - list->hash.key = list->file_offset_node->start; - ret = drm_ht_insert_item(&mm->offset_hash, &list->hash); - if (ret) { - dev_err(dev->dev, "failed to add to map hash\n"); - goto free_mm; - } - return 0; - -free_mm: - drm_mm_put_block(list->file_offset_node); -free_it: - kfree(list->map); - list->map = NULL; - return ret; -} diff --git a/drivers/staging/gma500/gem_glue.h b/drivers/staging/gma500/gem_glue.h deleted file mode 100644 index ce5ce30f74db..000000000000 --- a/drivers/staging/gma500/gem_glue.h +++ /dev/null @@ -1,2 +0,0 @@ -extern void drm_gem_object_release_wrap(struct drm_gem_object *obj); -extern int gem_create_mmap_offset(struct drm_gem_object *obj); diff --git a/drivers/staging/gma500/gtt.c b/drivers/staging/gma500/gtt.c deleted file mode 100644 index e770bd190a5c..000000000000 --- a/drivers/staging/gma500/gtt.c +++ /dev/null @@ -1,553 +0,0 @@ -/* - * Copyright (c) 2007, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: Thomas Hellstrom - * Alan Cox - */ - -#include -#include "psb_drv.h" - - -/* - * GTT resource allocator - manage page mappings in GTT space - */ - -/** - * psb_gtt_mask_pte - generate GTT pte entry - * @pfn: page number to encode - * @type: type of memory in the GTT - * - * Set the GTT entry for the appropriate memory type. - */ -static inline uint32_t psb_gtt_mask_pte(uint32_t pfn, int type) -{ - uint32_t mask = PSB_PTE_VALID; - - if (type & PSB_MMU_CACHED_MEMORY) - mask |= PSB_PTE_CACHED; - if (type & PSB_MMU_RO_MEMORY) - mask |= PSB_PTE_RO; - if (type & PSB_MMU_WO_MEMORY) - mask |= PSB_PTE_WO; - - return (pfn << PAGE_SHIFT) | mask; -} - -/** - * psb_gtt_entry - find the GTT entries for a gtt_range - * @dev: our DRM device - * @r: our GTT range - * - * Given a gtt_range object return the GTT offset of the page table - * entries for this gtt_range - */ -u32 *psb_gtt_entry(struct drm_device *dev, struct gtt_range *r) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long offset; - - offset = r->resource.start - dev_priv->gtt_mem->start; - - return dev_priv->gtt_map + (offset >> PAGE_SHIFT); -} - -/** - * psb_gtt_insert - put an object into the GTT - * @dev: our DRM device - * @r: our GTT range - * - * Take our preallocated GTT range and insert the GEM object into - * the GTT. This is protected via the gtt mutex which the caller - * must hold. - */ -static int psb_gtt_insert(struct drm_device *dev, struct gtt_range *r) -{ - u32 *gtt_slot, pte; - struct page **pages; - int i; - - if (r->pages == NULL) { - WARN_ON(1); - return -EINVAL; - } - - WARN_ON(r->stolen); /* refcount these maybe ? */ - - gtt_slot = psb_gtt_entry(dev, r); - pages = r->pages; - - /* Make sure changes are visible to the GPU */ - set_pages_array_uc(pages, r->npage); - - /* Write our page entries into the GTT itself */ - for (i = r->roll; i < r->npage; i++) { - pte = psb_gtt_mask_pte(page_to_pfn(r->pages[i]), 0); - iowrite32(pte, gtt_slot++); - } - for (i = 0; i < r->roll; i++) { - pte = psb_gtt_mask_pte(page_to_pfn(r->pages[i]), 0); - iowrite32(pte, gtt_slot++); - } - /* Make sure all the entries are set before we return */ - ioread32(gtt_slot - 1); - - return 0; -} - -/** - * psb_gtt_remove - remove an object from the GTT - * @dev: our DRM device - * @r: our GTT range - * - * Remove a preallocated GTT range from the GTT. Overwrite all the - * page table entries with the dummy page. This is protected via the gtt - * mutex which the caller must hold. - */ -static void psb_gtt_remove(struct drm_device *dev, struct gtt_range *r) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 *gtt_slot, pte; - int i; - - WARN_ON(r->stolen); - - gtt_slot = psb_gtt_entry(dev, r); - pte = psb_gtt_mask_pte(page_to_pfn(dev_priv->scratch_page), 0); - - for (i = 0; i < r->npage; i++) - iowrite32(pte, gtt_slot++); - ioread32(gtt_slot - 1); - set_pages_array_wb(r->pages, r->npage); -} - -/** - * psb_gtt_roll - set scrolling position - * @dev: our DRM device - * @r: the gtt mapping we are using - * @roll: roll offset - * - * Roll an existing pinned mapping by moving the pages through the GTT. - * This allows us to implement hardware scrolling on the consoles without - * a 2D engine - */ -void psb_gtt_roll(struct drm_device *dev, struct gtt_range *r, int roll) -{ - u32 *gtt_slot, pte; - int i; - - if (roll >= r->npage) { - WARN_ON(1); - return; - } - - r->roll = roll; - - /* Not currently in the GTT - no worry we will write the mapping at - the right position when it gets pinned */ - if (!r->stolen && !r->in_gart) - return; - - gtt_slot = psb_gtt_entry(dev, r); - - for (i = r->roll; i < r->npage; i++) { - pte = psb_gtt_mask_pte(page_to_pfn(r->pages[i]), 0); - iowrite32(pte, gtt_slot++); - } - for (i = 0; i < r->roll; i++) { - pte = psb_gtt_mask_pte(page_to_pfn(r->pages[i]), 0); - iowrite32(pte, gtt_slot++); - } - ioread32(gtt_slot - 1); -} - -/** - * psb_gtt_attach_pages - attach and pin GEM pages - * @gt: the gtt range - * - * Pin and build an in kernel list of the pages that back our GEM object. - * While we hold this the pages cannot be swapped out. This is protected - * via the gtt mutex which the caller must hold. - */ -static int psb_gtt_attach_pages(struct gtt_range *gt) -{ - struct inode *inode; - struct address_space *mapping; - int i; - struct page *p; - int pages = gt->gem.size / PAGE_SIZE; - - WARN_ON(gt->pages); - - /* This is the shared memory object that backs the GEM resource */ - inode = gt->gem.filp->f_path.dentry->d_inode; - mapping = inode->i_mapping; - - gt->pages = kmalloc(pages * sizeof(struct page *), GFP_KERNEL); - if (gt->pages == NULL) - return -ENOMEM; - gt->npage = pages; - - for (i = 0; i < pages; i++) { - /* FIXME: needs updating as per mail from Hugh Dickins */ - p = read_cache_page_gfp(mapping, i, - __GFP_COLD | GFP_KERNEL); - if (IS_ERR(p)) - goto err; - gt->pages[i] = p; - } - return 0; - -err: - while (i--) - page_cache_release(gt->pages[i]); - kfree(gt->pages); - gt->pages = NULL; - return PTR_ERR(p); -} - -/** - * psb_gtt_detach_pages - attach and pin GEM pages - * @gt: the gtt range - * - * Undo the effect of psb_gtt_attach_pages. At this point the pages - * must have been removed from the GTT as they could now be paged out - * and move bus address. This is protected via the gtt mutex which the - * caller must hold. - */ -static void psb_gtt_detach_pages(struct gtt_range *gt) -{ - int i; - for (i = 0; i < gt->npage; i++) { - /* FIXME: do we need to force dirty */ - set_page_dirty(gt->pages[i]); - page_cache_release(gt->pages[i]); - } - kfree(gt->pages); - gt->pages = NULL; -} - -/** - * psb_gtt_pin - pin pages into the GTT - * @gt: range to pin - * - * Pin a set of pages into the GTT. The pins are refcounted so that - * multiple pins need multiple unpins to undo. - * - * Non GEM backed objects treat this as a no-op as they are always GTT - * backed objects. - */ -int psb_gtt_pin(struct gtt_range *gt) -{ - int ret = 0; - struct drm_device *dev = gt->gem.dev; - struct drm_psb_private *dev_priv = dev->dev_private; - - mutex_lock(&dev_priv->gtt_mutex); - - if (gt->in_gart == 0 && gt->stolen == 0) { - ret = psb_gtt_attach_pages(gt); - if (ret < 0) - goto out; - ret = psb_gtt_insert(dev, gt); - if (ret < 0) { - psb_gtt_detach_pages(gt); - goto out; - } - } - gt->in_gart++; -out: - mutex_unlock(&dev_priv->gtt_mutex); - return ret; -} - -/** - * psb_gtt_unpin - Drop a GTT pin requirement - * @gt: range to pin - * - * Undoes the effect of psb_gtt_pin. On the last drop the GEM object - * will be removed from the GTT which will also drop the page references - * and allow the VM to clean up or page stuff. - * - * Non GEM backed objects treat this as a no-op as they are always GTT - * backed objects. - */ -void psb_gtt_unpin(struct gtt_range *gt) -{ - struct drm_device *dev = gt->gem.dev; - struct drm_psb_private *dev_priv = dev->dev_private; - - mutex_lock(&dev_priv->gtt_mutex); - - WARN_ON(!gt->in_gart); - - gt->in_gart--; - if (gt->in_gart == 0 && gt->stolen == 0) { - psb_gtt_remove(dev, gt); - psb_gtt_detach_pages(gt); - } - mutex_unlock(&dev_priv->gtt_mutex); -} - -/* - * GTT resource allocator - allocate and manage GTT address space - */ - -/** - * psb_gtt_alloc_range - allocate GTT address space - * @dev: Our DRM device - * @len: length (bytes) of address space required - * @name: resource name - * @backed: resource should be backed by stolen pages - * - * Ask the kernel core to find us a suitable range of addresses - * to use for a GTT mapping. - * - * Returns a gtt_range structure describing the object, or NULL on - * error. On successful return the resource is both allocated and marked - * as in use. - */ -struct gtt_range *psb_gtt_alloc_range(struct drm_device *dev, int len, - const char *name, int backed) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct gtt_range *gt; - struct resource *r = dev_priv->gtt_mem; - int ret; - unsigned long start, end; - - if (backed) { - /* The start of the GTT is the stolen pages */ - start = r->start; - end = r->start + dev_priv->gtt.stolen_size - 1; - } else { - /* The rest we will use for GEM backed objects */ - start = r->start + dev_priv->gtt.stolen_size; - end = r->end; - } - - gt = kzalloc(sizeof(struct gtt_range), GFP_KERNEL); - if (gt == NULL) - return NULL; - gt->resource.name = name; - gt->stolen = backed; - gt->in_gart = backed; - gt->roll = 0; - /* Ensure this is set for non GEM objects */ - gt->gem.dev = dev; - ret = allocate_resource(dev_priv->gtt_mem, >->resource, - len, start, end, PAGE_SIZE, NULL, NULL); - if (ret == 0) { - gt->offset = gt->resource.start - r->start; - return gt; - } - kfree(gt); - return NULL; -} - -/** - * psb_gtt_free_range - release GTT address space - * @dev: our DRM device - * @gt: a mapping created with psb_gtt_alloc_range - * - * Release a resource that was allocated with psb_gtt_alloc_range. If the - * object has been pinned by mmap users we clean this up here currently. - */ -void psb_gtt_free_range(struct drm_device *dev, struct gtt_range *gt) -{ - /* Undo the mmap pin if we are destroying the object */ - if (gt->mmapping) { - psb_gtt_unpin(gt); - gt->mmapping = 0; - } - WARN_ON(gt->in_gart && !gt->stolen); - release_resource(>->resource); - kfree(gt); -} - -void psb_gtt_alloc(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - init_rwsem(&dev_priv->gtt.sem); -} - -void psb_gtt_takedown(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - if (dev_priv->gtt_map) { - iounmap(dev_priv->gtt_map); - dev_priv->gtt_map = NULL; - } - if (dev_priv->gtt_initialized) { - pci_write_config_word(dev->pdev, PSB_GMCH_CTRL, - dev_priv->gmch_ctrl); - PSB_WVDC32(dev_priv->pge_ctl, PSB_PGETBL_CTL); - (void) PSB_RVDC32(PSB_PGETBL_CTL); - } - if (dev_priv->vram_addr) - iounmap(dev_priv->gtt_map); -} - -int psb_gtt_init(struct drm_device *dev, int resume) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned gtt_pages; - unsigned long stolen_size, vram_stolen_size; - unsigned i, num_pages; - unsigned pfn_base; - uint32_t vram_pages; - uint32_t dvmt_mode = 0; - struct psb_gtt *pg; - - int ret = 0; - uint32_t pte; - - mutex_init(&dev_priv->gtt_mutex); - - psb_gtt_alloc(dev); - pg = &dev_priv->gtt; - - /* Enable the GTT */ - pci_read_config_word(dev->pdev, PSB_GMCH_CTRL, &dev_priv->gmch_ctrl); - pci_write_config_word(dev->pdev, PSB_GMCH_CTRL, - dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED); - - dev_priv->pge_ctl = PSB_RVDC32(PSB_PGETBL_CTL); - PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL); - (void) PSB_RVDC32(PSB_PGETBL_CTL); - - /* The root resource we allocate address space from */ - dev_priv->gtt_initialized = 1; - - pg->gtt_phys_start = dev_priv->pge_ctl & PAGE_MASK; - - /* - * The video mmu has a hw bug when accessing 0x0D0000000. - * Make gatt start at 0x0e000,0000. This doesn't actually - * matter for us but may do if the video acceleration ever - * gets opened up. - */ - pg->mmu_gatt_start = 0xE0000000; - - pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE); - gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE) - >> PAGE_SHIFT; - /* Some CDV firmware doesn't report this currently. In which case the - system has 64 gtt pages */ - if (pg->gtt_start == 0 || gtt_pages == 0) { - dev_err(dev->dev, "GTT PCI BAR not initialized.\n"); - gtt_pages = 64; - pg->gtt_start = dev_priv->pge_ctl; - } - - pg->gatt_start = pci_resource_start(dev->pdev, PSB_GATT_RESOURCE); - pg->gatt_pages = pci_resource_len(dev->pdev, PSB_GATT_RESOURCE) - >> PAGE_SHIFT; - dev_priv->gtt_mem = &dev->pdev->resource[PSB_GATT_RESOURCE]; - - if (pg->gatt_pages == 0 || pg->gatt_start == 0) { - static struct resource fudge; /* Preferably peppermint */ - /* This can occur on CDV SDV systems. Fudge it in this case. - We really don't care what imaginary space is being allocated - at this point */ - dev_err(dev->dev, "GATT PCI BAR not initialized.\n"); - pg->gatt_start = 0x40000000; - pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT; - /* This is a little confusing but in fact the GTT is providing - a view from the GPU into memory and not vice versa. As such - this is really allocating space that is not the same as the - CPU address space on CDV */ - fudge.start = 0x40000000; - fudge.end = 0x40000000 + 128 * 1024 * 1024 - 1; - fudge.name = "fudge"; - fudge.flags = IORESOURCE_MEM; - dev_priv->gtt_mem = &fudge; - } - - pci_read_config_dword(dev->pdev, PSB_BSM, &dev_priv->stolen_base); - vram_stolen_size = pg->gtt_phys_start - dev_priv->stolen_base - - PAGE_SIZE; - - stolen_size = vram_stolen_size; - - printk(KERN_INFO "Stolen memory information\n"); - printk(KERN_INFO " base in RAM: 0x%x\n", dev_priv->stolen_base); - printk(KERN_INFO " size: %luK, calculated by (GTT RAM base) - (Stolen base), seems wrong\n", - vram_stolen_size/1024); - dvmt_mode = (dev_priv->gmch_ctrl >> 4) & 0x7; - printk(KERN_INFO " the correct size should be: %dM(dvmt mode=%d)\n", - (dvmt_mode == 1) ? 1 : (2 << (dvmt_mode - 1)), dvmt_mode); - - if (resume && (gtt_pages != pg->gtt_pages) && - (stolen_size != pg->stolen_size)) { - dev_err(dev->dev, "GTT resume error.\n"); - ret = -EINVAL; - goto out_err; - } - - pg->gtt_pages = gtt_pages; - pg->stolen_size = stolen_size; - dev_priv->vram_stolen_size = vram_stolen_size; - - /* - * Map the GTT and the stolen memory area - */ - dev_priv->gtt_map = ioremap_nocache(pg->gtt_phys_start, - gtt_pages << PAGE_SHIFT); - if (!dev_priv->gtt_map) { - dev_err(dev->dev, "Failure to map gtt.\n"); - ret = -ENOMEM; - goto out_err; - } - - dev_priv->vram_addr = ioremap_wc(dev_priv->stolen_base, stolen_size); - if (!dev_priv->vram_addr) { - dev_err(dev->dev, "Failure to map stolen base.\n"); - ret = -ENOMEM; - goto out_err; - } - - /* - * Insert vram stolen pages into the GTT - */ - - pfn_base = dev_priv->stolen_base >> PAGE_SHIFT; - vram_pages = num_pages = vram_stolen_size >> PAGE_SHIFT; - printk(KERN_INFO"Set up %d stolen pages starting at 0x%08x, GTT offset %dK\n", - num_pages, pfn_base << PAGE_SHIFT, 0); - for (i = 0; i < num_pages; ++i) { - pte = psb_gtt_mask_pte(pfn_base + i, 0); - iowrite32(pte, dev_priv->gtt_map + i); - } - - /* - * Init rest of GTT to the scratch page to avoid accidents or scribbles - */ - - pfn_base = page_to_pfn(dev_priv->scratch_page); - pte = psb_gtt_mask_pte(pfn_base, 0); - for (; i < gtt_pages; ++i) - iowrite32(pte, dev_priv->gtt_map + i); - - (void) ioread32(dev_priv->gtt_map + i - 1); - return 0; - -out_err: - psb_gtt_takedown(dev); - return ret; -} diff --git a/drivers/staging/gma500/gtt.h b/drivers/staging/gma500/gtt.h deleted file mode 100644 index aa1742387f5a..000000000000 --- a/drivers/staging/gma500/gtt.h +++ /dev/null @@ -1,64 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007-2008, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#ifndef _PSB_GTT_H_ -#define _PSB_GTT_H_ - -#include - -/* This wants cleaning up with respect to the psb_dev and un-needed stuff */ -struct psb_gtt { - uint32_t gatt_start; - uint32_t mmu_gatt_start; - uint32_t gtt_start; - uint32_t gtt_phys_start; - unsigned gtt_pages; - unsigned gatt_pages; - unsigned long stolen_size; - unsigned long vram_stolen_size; - struct rw_semaphore sem; -}; - -/* Exported functions */ -extern int psb_gtt_init(struct drm_device *dev, int resume); -extern void psb_gtt_takedown(struct drm_device *dev); - -/* Each gtt_range describes an allocation in the GTT area */ -struct gtt_range { - struct resource resource; /* Resource for our allocation */ - u32 offset; /* GTT offset of our object */ - struct drm_gem_object gem; /* GEM high level stuff */ - int in_gart; /* Currently in the GART (ref ct) */ - bool stolen; /* Backed from stolen RAM */ - bool mmapping; /* Is mmappable */ - struct page **pages; /* Backing pages if present */ - int npage; /* Number of backing pages */ - int roll; /* Roll applied to the GTT entries */ -}; - -extern struct gtt_range *psb_gtt_alloc_range(struct drm_device *dev, int len, - const char *name, int backed); -extern void psb_gtt_kref_put(struct gtt_range *gt); -extern void psb_gtt_free_range(struct drm_device *dev, struct gtt_range *gt); -extern int psb_gtt_pin(struct gtt_range *gt); -extern void psb_gtt_unpin(struct gtt_range *gt); -extern void psb_gtt_roll(struct drm_device *dev, - struct gtt_range *gt, int roll); - -#endif diff --git a/drivers/staging/gma500/intel_bios.c b/drivers/staging/gma500/intel_bios.c deleted file mode 100644 index 096757f9bc89..000000000000 --- a/drivers/staging/gma500/intel_bios.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * Copyright (c) 2006 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - * - */ -#include -#include -#include "psb_drm.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "intel_bios.h" - - -static void *find_section(struct bdb_header *bdb, int section_id) -{ - u8 *base = (u8 *)bdb; - int index = 0; - u16 total, current_size; - u8 current_id; - - /* skip to first section */ - index += bdb->header_size; - total = bdb->bdb_size; - - /* walk the sections looking for section_id */ - while (index < total) { - current_id = *(base + index); - index++; - current_size = *((u16 *)(base + index)); - index += 2; - if (current_id == section_id) - return base + index; - index += current_size; - } - - return NULL; -} - -static void fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, - struct lvds_dvo_timing *dvo_timing) -{ - panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | - dvo_timing->hactive_lo; - panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + - ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); - panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + - dvo_timing->hsync_pulse_width; - panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + - ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); - - panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | - dvo_timing->vactive_lo; - panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + - dvo_timing->vsync_off; - panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + - dvo_timing->vsync_pulse_width; - panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + - ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); - panel_fixed_mode->clock = dvo_timing->clock * 10; - panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; - - /* Some VBTs have bogus h/vtotal values */ - if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) - panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; - if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) - panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; - - drm_mode_set_name(panel_fixed_mode); -} - -static void parse_backlight_data(struct drm_psb_private *dev_priv, - struct bdb_header *bdb) -{ - struct bdb_lvds_backlight *vbt_lvds_bl = NULL; - struct bdb_lvds_backlight *lvds_bl; - u8 p_type = 0; - void *bl_start = NULL; - struct bdb_lvds_options *lvds_opts - = find_section(bdb, BDB_LVDS_OPTIONS); - - dev_priv->lvds_bl = NULL; - - if (lvds_opts) - p_type = lvds_opts->panel_type; - else - return; - - bl_start = find_section(bdb, BDB_LVDS_BACKLIGHT); - vbt_lvds_bl = (struct bdb_lvds_backlight *)(bl_start + 1) + p_type; - - lvds_bl = kzalloc(sizeof(*vbt_lvds_bl), GFP_KERNEL); - if (!lvds_bl) { - dev_err(dev_priv->dev->dev, "out of memory for backlight data\n"); - return; - } - memcpy(lvds_bl, vbt_lvds_bl, sizeof(*vbt_lvds_bl)); - dev_priv->lvds_bl = lvds_bl; -} - -/* Try to find integrated panel data */ -static void parse_lfp_panel_data(struct drm_psb_private *dev_priv, - struct bdb_header *bdb) -{ - struct bdb_lvds_options *lvds_options; - struct bdb_lvds_lfp_data *lvds_lfp_data; - struct bdb_lvds_lfp_data_entry *entry; - struct lvds_dvo_timing *dvo_timing; - struct drm_display_mode *panel_fixed_mode; - - /* Defaults if we can't find VBT info */ - dev_priv->lvds_dither = 0; - dev_priv->lvds_vbt = 0; - - lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); - if (!lvds_options) - return; - - dev_priv->lvds_dither = lvds_options->pixel_dither; - if (lvds_options->panel_type == 0xff) - return; - - lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); - if (!lvds_lfp_data) - return; - - - entry = &lvds_lfp_data->data[lvds_options->panel_type]; - dvo_timing = &entry->dvo_timing; - - panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), - GFP_KERNEL); - if (panel_fixed_mode == NULL) { - dev_err(dev_priv->dev->dev, "out of memory for fixed panel mode\n"); - return; - } - - dev_priv->lvds_vbt = 1; - fill_detail_timing_data(panel_fixed_mode, dvo_timing); - - if (panel_fixed_mode->htotal > 0 && panel_fixed_mode->vtotal > 0) { - dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode; - drm_mode_debug_printmodeline(panel_fixed_mode); - } else { - dev_dbg(dev_priv->dev->dev, "ignoring invalid LVDS VBT\n"); - dev_priv->lvds_vbt = 0; - kfree(panel_fixed_mode); - } - return; -} - -/* Try to find sdvo panel data */ -static void parse_sdvo_panel_data(struct drm_psb_private *dev_priv, - struct bdb_header *bdb) -{ - struct bdb_sdvo_lvds_options *sdvo_lvds_options; - struct lvds_dvo_timing *dvo_timing; - struct drm_display_mode *panel_fixed_mode; - - dev_priv->sdvo_lvds_vbt_mode = NULL; - - sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); - if (!sdvo_lvds_options) - return; - - dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS); - if (!dvo_timing) - return; - - panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); - - if (!panel_fixed_mode) - return; - - fill_detail_timing_data(panel_fixed_mode, - dvo_timing + sdvo_lvds_options->panel_type); - - dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode; - - return; -} - -static void parse_general_features(struct drm_psb_private *dev_priv, - struct bdb_header *bdb) -{ - struct bdb_general_features *general; - - /* Set sensible defaults in case we can't find the general block */ - dev_priv->int_tv_support = 1; - dev_priv->int_crt_support = 1; - - general = find_section(bdb, BDB_GENERAL_FEATURES); - if (general) { - dev_priv->int_tv_support = general->int_tv_support; - dev_priv->int_crt_support = general->int_crt_support; - dev_priv->lvds_use_ssc = general->enable_ssc; - - if (dev_priv->lvds_use_ssc) { - dev_priv->lvds_ssc_freq - = general->ssc_freq ? 100 : 96; - } - } -} - -/** - * psb_intel_init_bios - initialize VBIOS settings & find VBT - * @dev: DRM device - * - * Loads the Video BIOS and checks that the VBT exists. Sets scratch registers - * to appropriate values. - * - * VBT existence is a sanity check that is relied on by other i830_bios.c code. - * Note that it would be better to use a BIOS call to get the VBT, as BIOSes may - * feed an updated VBT back through that, compared to what we'll fetch using - * this method of groping around in the BIOS data. - * - * Returns 0 on success, nonzero on failure. - */ -bool psb_intel_init_bios(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct pci_dev *pdev = dev->pdev; - struct vbt_header *vbt = NULL; - struct bdb_header *bdb; - u8 __iomem *bios; - size_t size; - int i; - - bios = pci_map_rom(pdev, &size); - if (!bios) - return -1; - - /* Scour memory looking for the VBT signature */ - for (i = 0; i + 4 < size; i++) { - if (!memcmp(bios + i, "$VBT", 4)) { - vbt = (struct vbt_header *)(bios + i); - break; - } - } - - if (!vbt) { - dev_err(dev->dev, "VBT signature missing\n"); - pci_unmap_rom(pdev, bios); - return -1; - } - - bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset); - - /* Grab useful general definitions */ - parse_general_features(dev_priv, bdb); - parse_lfp_panel_data(dev_priv, bdb); - parse_sdvo_panel_data(dev_priv, bdb); - parse_backlight_data(dev_priv, bdb); - - pci_unmap_rom(pdev, bios); - - return 0; -} - -/** - * Destroy and free VBT data - */ -void psb_intel_destroy_bios(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_display_mode *sdvo_lvds_vbt_mode = - dev_priv->sdvo_lvds_vbt_mode; - struct drm_display_mode *lfp_lvds_vbt_mode = - dev_priv->lfp_lvds_vbt_mode; - struct bdb_lvds_backlight *lvds_bl = - dev_priv->lvds_bl; - - /*free sdvo panel mode*/ - if (sdvo_lvds_vbt_mode) { - dev_priv->sdvo_lvds_vbt_mode = NULL; - kfree(sdvo_lvds_vbt_mode); - } - - if (lfp_lvds_vbt_mode) { - dev_priv->lfp_lvds_vbt_mode = NULL; - kfree(lfp_lvds_vbt_mode); - } - - if (lvds_bl) { - dev_priv->lvds_bl = NULL; - kfree(lvds_bl); - } -} diff --git a/drivers/staging/gma500/intel_bios.h b/drivers/staging/gma500/intel_bios.h deleted file mode 100644 index 70f1bf018183..000000000000 --- a/drivers/staging/gma500/intel_bios.h +++ /dev/null @@ -1,430 +0,0 @@ -/* - * Copyright (c) 2006 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - * - */ - -#ifndef _I830_BIOS_H_ -#define _I830_BIOS_H_ - -#include - -struct vbt_header { - u8 signature[20]; /**< Always starts with 'VBT$' */ - u16 version; /**< decimal */ - u16 header_size; /**< in bytes */ - u16 vbt_size; /**< in bytes */ - u8 vbt_checksum; - u8 reserved0; - u32 bdb_offset; /**< from beginning of VBT */ - u32 aim_offset[4]; /**< from beginning of VBT */ -} __attribute__((packed)); - - -struct bdb_header { - u8 signature[16]; /**< Always 'BIOS_DATA_BLOCK' */ - u16 version; /**< decimal */ - u16 header_size; /**< in bytes */ - u16 bdb_size; /**< in bytes */ -}; - -/* strictly speaking, this is a "skip" block, but it has interesting info */ -struct vbios_data { - u8 type; /* 0 == desktop, 1 == mobile */ - u8 relstage; - u8 chipset; - u8 lvds_present:1; - u8 tv_present:1; - u8 rsvd2:6; /* finish byte */ - u8 rsvd3[4]; - u8 signon[155]; - u8 copyright[61]; - u16 code_segment; - u8 dos_boot_mode; - u8 bandwidth_percent; - u8 rsvd4; /* popup memory size */ - u8 resize_pci_bios; - u8 rsvd5; /* is crt already on ddc2 */ -} __attribute__((packed)); - -/* - * There are several types of BIOS data blocks (BDBs), each block has - * an ID and size in the first 3 bytes (ID in first, size in next 2). - * Known types are listed below. - */ -#define BDB_GENERAL_FEATURES 1 -#define BDB_GENERAL_DEFINITIONS 2 -#define BDB_OLD_TOGGLE_LIST 3 -#define BDB_MODE_SUPPORT_LIST 4 -#define BDB_GENERIC_MODE_TABLE 5 -#define BDB_EXT_MMIO_REGS 6 -#define BDB_SWF_IO 7 -#define BDB_SWF_MMIO 8 -#define BDB_DOT_CLOCK_TABLE 9 -#define BDB_MODE_REMOVAL_TABLE 10 -#define BDB_CHILD_DEVICE_TABLE 11 -#define BDB_DRIVER_FEATURES 12 -#define BDB_DRIVER_PERSISTENCE 13 -#define BDB_EXT_TABLE_PTRS 14 -#define BDB_DOT_CLOCK_OVERRIDE 15 -#define BDB_DISPLAY_SELECT 16 -/* 17 rsvd */ -#define BDB_DRIVER_ROTATION 18 -#define BDB_DISPLAY_REMOVE 19 -#define BDB_OEM_CUSTOM 20 -#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */ -#define BDB_SDVO_LVDS_OPTIONS 22 -#define BDB_SDVO_PANEL_DTDS 23 -#define BDB_SDVO_LVDS_PNP_IDS 24 -#define BDB_SDVO_LVDS_POWER_SEQ 25 -#define BDB_TV_OPTIONS 26 -#define BDB_LVDS_OPTIONS 40 -#define BDB_LVDS_LFP_DATA_PTRS 41 -#define BDB_LVDS_LFP_DATA 42 -#define BDB_LVDS_BACKLIGHT 43 -#define BDB_LVDS_POWER 44 -#define BDB_SKIP 254 /* VBIOS private block, ignore */ - -struct bdb_general_features { - /* bits 1 */ - u8 panel_fitting:2; - u8 flexaim:1; - u8 msg_enable:1; - u8 clear_screen:3; - u8 color_flip:1; - - /* bits 2 */ - u8 download_ext_vbt:1; - u8 enable_ssc:1; - u8 ssc_freq:1; - u8 enable_lfp_on_override:1; - u8 disable_ssc_ddt:1; - u8 rsvd8:3; /* finish byte */ - - /* bits 3 */ - u8 disable_smooth_vision:1; - u8 single_dvi:1; - u8 rsvd9:6; /* finish byte */ - - /* bits 4 */ - u8 legacy_monitor_detect; - - /* bits 5 */ - u8 int_crt_support:1; - u8 int_tv_support:1; - u8 rsvd11:6; /* finish byte */ -} __attribute__((packed)); - -struct bdb_general_definitions { - /* DDC GPIO */ - u8 crt_ddc_gmbus_pin; - - /* DPMS bits */ - u8 dpms_acpi:1; - u8 skip_boot_crt_detect:1; - u8 dpms_aim:1; - u8 rsvd1:5; /* finish byte */ - - /* boot device bits */ - u8 boot_display[2]; - u8 child_dev_size; - - /* device info */ - u8 tv_or_lvds_info[33]; - u8 dev1[33]; - u8 dev2[33]; - u8 dev3[33]; - u8 dev4[33]; - /* may be another device block here on some platforms */ -}; - -struct bdb_lvds_options { - u8 panel_type; - u8 rsvd1; - /* LVDS capabilities, stored in a dword */ - u8 pfit_mode:2; - u8 pfit_text_mode_enhanced:1; - u8 pfit_gfx_mode_enhanced:1; - u8 pfit_ratio_auto:1; - u8 pixel_dither:1; - u8 lvds_edid:1; - u8 rsvd2:1; - u8 rsvd4; -} __attribute__((packed)); - -struct bdb_lvds_backlight { - u8 type:2; - u8 pol:1; - u8 gpio:3; - u8 gmbus:2; - u16 freq; - u8 minbrightness; - u8 i2caddr; - u8 brightnesscmd; - /*FIXME: more...*/ -} __attribute__((packed)); - -/* LFP pointer table contains entries to the struct below */ -struct bdb_lvds_lfp_data_ptr { - u16 fp_timing_offset; /* offsets are from start of bdb */ - u8 fp_table_size; - u16 dvo_timing_offset; - u8 dvo_table_size; - u16 panel_pnp_id_offset; - u8 pnp_table_size; -} __attribute__((packed)); - -struct bdb_lvds_lfp_data_ptrs { - u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */ - struct bdb_lvds_lfp_data_ptr ptr[16]; -} __attribute__((packed)); - -/* LFP data has 3 blocks per entry */ -struct lvds_fp_timing { - u16 x_res; - u16 y_res; - u32 lvds_reg; - u32 lvds_reg_val; - u32 pp_on_reg; - u32 pp_on_reg_val; - u32 pp_off_reg; - u32 pp_off_reg_val; - u32 pp_cycle_reg; - u32 pp_cycle_reg_val; - u32 pfit_reg; - u32 pfit_reg_val; - u16 terminator; -} __attribute__((packed)); - -struct lvds_dvo_timing { - u16 clock; /**< In 10khz */ - u8 hactive_lo; - u8 hblank_lo; - u8 hblank_hi:4; - u8 hactive_hi:4; - u8 vactive_lo; - u8 vblank_lo; - u8 vblank_hi:4; - u8 vactive_hi:4; - u8 hsync_off_lo; - u8 hsync_pulse_width; - u8 vsync_pulse_width:4; - u8 vsync_off:4; - u8 rsvd0:6; - u8 hsync_off_hi:2; - u8 h_image; - u8 v_image; - u8 max_hv; - u8 h_border; - u8 v_border; - u8 rsvd1:3; - u8 digital:2; - u8 vsync_positive:1; - u8 hsync_positive:1; - u8 rsvd2:1; -} __attribute__((packed)); - -struct lvds_pnp_id { - u16 mfg_name; - u16 product_code; - u32 serial; - u8 mfg_week; - u8 mfg_year; -} __attribute__((packed)); - -struct bdb_lvds_lfp_data_entry { - struct lvds_fp_timing fp_timing; - struct lvds_dvo_timing dvo_timing; - struct lvds_pnp_id pnp_id; -} __attribute__((packed)); - -struct bdb_lvds_lfp_data { - struct bdb_lvds_lfp_data_entry data[16]; -} __attribute__((packed)); - -struct aimdb_header { - char signature[16]; - char oem_device[20]; - u16 aimdb_version; - u16 aimdb_header_size; - u16 aimdb_size; -} __attribute__((packed)); - -struct aimdb_block { - u8 aimdb_id; - u16 aimdb_size; -} __attribute__((packed)); - -struct vch_panel_data { - u16 fp_timing_offset; - u8 fp_timing_size; - u16 dvo_timing_offset; - u8 dvo_timing_size; - u16 text_fitting_offset; - u8 text_fitting_size; - u16 graphics_fitting_offset; - u8 graphics_fitting_size; -} __attribute__((packed)); - -struct vch_bdb_22 { - struct aimdb_block aimdb_block; - struct vch_panel_data panels[16]; -} __attribute__((packed)); - -struct bdb_sdvo_lvds_options { - u8 panel_backlight; - u8 h40_set_panel_type; - u8 panel_type; - u8 ssc_clk_freq; - u16 als_low_trip; - u16 als_high_trip; - u8 sclalarcoeff_tab_row_num; - u8 sclalarcoeff_tab_row_size; - u8 coefficient[8]; - u8 panel_misc_bits_1; - u8 panel_misc_bits_2; - u8 panel_misc_bits_3; - u8 panel_misc_bits_4; -} __attribute__((packed)); - - -extern bool psb_intel_init_bios(struct drm_device *dev); -extern void psb_intel_destroy_bios(struct drm_device *dev); - -/* - * Driver<->VBIOS interaction occurs through scratch bits in - * GR18 & SWF*. - */ - -/* GR18 bits are set on display switch and hotkey events */ -#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */ -#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */ -#define GR18_HK_NONE (0x0<<3) -#define GR18_HK_LFP_STRETCH (0x1<<3) -#define GR18_HK_TOGGLE_DISP (0x2<<3) -#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */ -#define GR18_HK_POPUP_DISABLED (0x6<<3) -#define GR18_HK_POPUP_ENABLED (0x7<<3) -#define GR18_HK_PFIT (0x8<<3) -#define GR18_HK_APM_CHANGE (0xa<<3) -#define GR18_HK_MULTIPLE (0xc<<3) -#define GR18_USER_INT_EN (1<<2) -#define GR18_A0000_FLUSH_EN (1<<1) -#define GR18_SMM_EN (1<<0) - -/* Set by driver, cleared by VBIOS */ -#define SWF00_YRES_SHIFT 16 -#define SWF00_XRES_SHIFT 0 -#define SWF00_RES_MASK 0xffff - -/* Set by VBIOS at boot time and driver at runtime */ -#define SWF01_TV2_FORMAT_SHIFT 8 -#define SWF01_TV1_FORMAT_SHIFT 0 -#define SWF01_TV_FORMAT_MASK 0xffff - -#define SWF10_VBIOS_BLC_I2C_EN (1<<29) -#define SWF10_GTT_OVERRIDE_EN (1<<28) -#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */ -#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24) -#define SWF10_OLD_TOGGLE 0x0 -#define SWF10_TOGGLE_LIST_1 0x1 -#define SWF10_TOGGLE_LIST_2 0x2 -#define SWF10_TOGGLE_LIST_3 0x3 -#define SWF10_TOGGLE_LIST_4 0x4 -#define SWF10_PANNING_EN (1<<23) -#define SWF10_DRIVER_LOADED (1<<22) -#define SWF10_EXTENDED_DESKTOP (1<<21) -#define SWF10_EXCLUSIVE_MODE (1<<20) -#define SWF10_OVERLAY_EN (1<<19) -#define SWF10_PLANEB_HOLDOFF (1<<18) -#define SWF10_PLANEA_HOLDOFF (1<<17) -#define SWF10_VGA_HOLDOFF (1<<16) -#define SWF10_ACTIVE_DISP_MASK 0xffff -#define SWF10_PIPEB_LFP2 (1<<15) -#define SWF10_PIPEB_EFP2 (1<<14) -#define SWF10_PIPEB_TV2 (1<<13) -#define SWF10_PIPEB_CRT2 (1<<12) -#define SWF10_PIPEB_LFP (1<<11) -#define SWF10_PIPEB_EFP (1<<10) -#define SWF10_PIPEB_TV (1<<9) -#define SWF10_PIPEB_CRT (1<<8) -#define SWF10_PIPEA_LFP2 (1<<7) -#define SWF10_PIPEA_EFP2 (1<<6) -#define SWF10_PIPEA_TV2 (1<<5) -#define SWF10_PIPEA_CRT2 (1<<4) -#define SWF10_PIPEA_LFP (1<<3) -#define SWF10_PIPEA_EFP (1<<2) -#define SWF10_PIPEA_TV (1<<1) -#define SWF10_PIPEA_CRT (1<<0) - -#define SWF11_MEMORY_SIZE_SHIFT 16 -#define SWF11_SV_TEST_EN (1<<15) -#define SWF11_IS_AGP (1<<14) -#define SWF11_DISPLAY_HOLDOFF (1<<13) -#define SWF11_DPMS_REDUCED (1<<12) -#define SWF11_IS_VBE_MODE (1<<11) -#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */ -#define SWF11_DPMS_MASK 0x07 -#define SWF11_DPMS_OFF (1<<2) -#define SWF11_DPMS_SUSPEND (1<<1) -#define SWF11_DPMS_STANDBY (1<<0) -#define SWF11_DPMS_ON 0 - -#define SWF14_GFX_PFIT_EN (1<<31) -#define SWF14_TEXT_PFIT_EN (1<<30) -#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */ -#define SWF14_POPUP_EN (1<<28) -#define SWF14_DISPLAY_HOLDOFF (1<<27) -#define SWF14_DISP_DETECT_EN (1<<26) -#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */ -#define SWF14_DRIVER_STATUS (1<<24) -#define SWF14_OS_TYPE_WIN9X (1<<23) -#define SWF14_OS_TYPE_WINNT (1<<22) -/* 21:19 rsvd */ -#define SWF14_PM_TYPE_MASK 0x00070000 -#define SWF14_PM_ACPI_VIDEO (0x4 << 16) -#define SWF14_PM_ACPI (0x3 << 16) -#define SWF14_PM_APM_12 (0x2 << 16) -#define SWF14_PM_APM_11 (0x1 << 16) -#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */ - /* if GR18 indicates a display switch */ -#define SWF14_DS_PIPEB_LFP2_EN (1<<15) -#define SWF14_DS_PIPEB_EFP2_EN (1<<14) -#define SWF14_DS_PIPEB_TV2_EN (1<<13) -#define SWF14_DS_PIPEB_CRT2_EN (1<<12) -#define SWF14_DS_PIPEB_LFP_EN (1<<11) -#define SWF14_DS_PIPEB_EFP_EN (1<<10) -#define SWF14_DS_PIPEB_TV_EN (1<<9) -#define SWF14_DS_PIPEB_CRT_EN (1<<8) -#define SWF14_DS_PIPEA_LFP2_EN (1<<7) -#define SWF14_DS_PIPEA_EFP2_EN (1<<6) -#define SWF14_DS_PIPEA_TV2_EN (1<<5) -#define SWF14_DS_PIPEA_CRT2_EN (1<<4) -#define SWF14_DS_PIPEA_LFP_EN (1<<3) -#define SWF14_DS_PIPEA_EFP_EN (1<<2) -#define SWF14_DS_PIPEA_TV_EN (1<<1) -#define SWF14_DS_PIPEA_CRT_EN (1<<0) - /* if GR18 indicates a panel fitting request */ -#define SWF14_PFIT_EN (1<<0) /* 0 means disable */ - /* if GR18 indicates an APM change request */ -#define SWF14_APM_HIBERNATE 0x4 -#define SWF14_APM_SUSPEND 0x3 -#define SWF14_APM_STANDBY 0x1 -#define SWF14_APM_RESTORE 0x0 - -#endif /* _I830_BIOS_H_ */ diff --git a/drivers/staging/gma500/intel_i2c.c b/drivers/staging/gma500/intel_i2c.c deleted file mode 100644 index 51cbf65268e6..000000000000 --- a/drivers/staging/gma500/intel_i2c.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright © 2006-2007 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - */ - -#include -#include -#include - -#include "psb_drv.h" -#include "psb_intel_reg.h" - -/* - * Intel GPIO access functions - */ - -#define I2C_RISEFALL_TIME 20 - -static int get_clock(void *data) -{ - struct psb_intel_i2c_chan *chan = data; - struct drm_device *dev = chan->drm_dev; - u32 val; - - val = REG_READ(chan->reg); - return (val & GPIO_CLOCK_VAL_IN) != 0; -} - -static int get_data(void *data) -{ - struct psb_intel_i2c_chan *chan = data; - struct drm_device *dev = chan->drm_dev; - u32 val; - - val = REG_READ(chan->reg); - return (val & GPIO_DATA_VAL_IN) != 0; -} - -static void set_clock(void *data, int state_high) -{ - struct psb_intel_i2c_chan *chan = data; - struct drm_device *dev = chan->drm_dev; - u32 reserved = 0, clock_bits; - - /* On most chips, these bits must be preserved in software. */ - reserved = - REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | - GPIO_CLOCK_PULLUP_DISABLE); - - if (state_high) - clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK; - else - clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK | - GPIO_CLOCK_VAL_MASK; - REG_WRITE(chan->reg, reserved | clock_bits); - udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ -} - -static void set_data(void *data, int state_high) -{ - struct psb_intel_i2c_chan *chan = data; - struct drm_device *dev = chan->drm_dev; - u32 reserved = 0, data_bits; - - /* On most chips, these bits must be preserved in software. */ - reserved = - REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | - GPIO_CLOCK_PULLUP_DISABLE); - - if (state_high) - data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; - else - data_bits = - GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | - GPIO_DATA_VAL_MASK; - - REG_WRITE(chan->reg, reserved | data_bits); - udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ -} - -/** - * psb_intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg - * @dev: DRM device - * @output: driver specific output device - * @reg: GPIO reg to use - * @name: name for this bus - * - * Creates and registers a new i2c bus with the Linux i2c layer, for use - * in output probing and control (e.g. DDC or SDVO control functions). - * - * Possible values for @reg include: - * %GPIOA - * %GPIOB - * %GPIOC - * %GPIOD - * %GPIOE - * %GPIOF - * %GPIOG - * %GPIOH - * see PRM for details on how these different busses are used. - */ -struct psb_intel_i2c_chan *psb_intel_i2c_create(struct drm_device *dev, - const u32 reg, const char *name) -{ - struct psb_intel_i2c_chan *chan; - - chan = kzalloc(sizeof(struct psb_intel_i2c_chan), GFP_KERNEL); - if (!chan) - goto out_free; - - chan->drm_dev = dev; - chan->reg = reg; - snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name); - chan->adapter.owner = THIS_MODULE; - chan->adapter.algo_data = &chan->algo; - chan->adapter.dev.parent = &dev->pdev->dev; - chan->algo.setsda = set_data; - chan->algo.setscl = set_clock; - chan->algo.getsda = get_data; - chan->algo.getscl = get_clock; - chan->algo.udelay = 20; - chan->algo.timeout = usecs_to_jiffies(2200); - chan->algo.data = chan; - - i2c_set_adapdata(&chan->adapter, chan); - - if (i2c_bit_add_bus(&chan->adapter)) - goto out_free; - - /* JJJ: raise SCL and SDA? */ - set_data(chan, 1); - set_clock(chan, 1); - udelay(20); - - return chan; - -out_free: - kfree(chan); - return NULL; -} - -/** - * psb_intel_i2c_destroy - unregister and free i2c bus resources - * @output: channel to free - * - * Unregister the adapter from the i2c layer, then free the structure. - */ -void psb_intel_i2c_destroy(struct psb_intel_i2c_chan *chan) -{ - if (!chan) - return; - - i2c_del_adapter(&chan->adapter); - kfree(chan); -} diff --git a/drivers/staging/gma500/intel_opregion.c b/drivers/staging/gma500/intel_opregion.c deleted file mode 100644 index d946bc1b17bf..000000000000 --- a/drivers/staging/gma500/intel_opregion.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * FIXME: resolve with the i915 version - */ - -#include "psb_drv.h" - -struct opregion_header { - u8 signature[16]; - u32 size; - u32 opregion_ver; - u8 bios_ver[32]; - u8 vbios_ver[16]; - u8 driver_ver[16]; - u32 mboxes; - u8 reserved[164]; -} __packed; - -struct opregion_apci { - /*FIXME: add it later*/ -} __packed; - -struct opregion_swsci { - /*FIXME: add it later*/ -} __packed; - -struct opregion_acpi { - /*FIXME: add it later*/ -} __packed; - -int gma_intel_opregion_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 opregion_phy; - void *base; - u32 *lid_state; - - dev_priv->lid_state = NULL; - - pci_read_config_dword(dev->pdev, 0xfc, &opregion_phy); - if (opregion_phy == 0) - return -ENOTSUPP; - - base = ioremap(opregion_phy, 8*1024); - if (!base) - return -ENOMEM; - - lid_state = base + 0x01ac; - - dev_priv->lid_state = lid_state; - dev_priv->lid_last_state = readl(lid_state); - return 0; -} - -int gma_intel_opregion_exit(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - if (dev_priv->lid_state) - iounmap(dev_priv->lid_state); - return 0; -} diff --git a/drivers/staging/gma500/mdfld_device.c b/drivers/staging/gma500/mdfld_device.c deleted file mode 100644 index f47aeb7a2039..000000000000 --- a/drivers/staging/gma500/mdfld_device.c +++ /dev/null @@ -1,714 +0,0 @@ -/************************************************************************** - * Copyright (c) 2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#include -#include -#include -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include "psb_drm.h" -#include "psb_drv.h" -#include "mdfld_output.h" -#include "mdfld_dsi_output.h" -#include "mid_bios.h" - -/* - * Provide the Medfield specific backlight management - */ - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - -static int mdfld_brightness; -struct backlight_device *mdfld_backlight_device; - -static int mfld_set_brightness(struct backlight_device *bd) -{ - struct drm_device *dev = bl_get_data(mdfld_backlight_device); - struct drm_psb_private *dev_priv = dev->dev_private; - int level = bd->props.brightness; - - /* Percentage 1-100% being valid */ - if (level < 1) - level = 1; - - if (gma_power_begin(dev, 0)) { - /* Calculate and set the brightness value */ - u32 adjusted_level; - - /* Adjust the backlight level with the percent in - * dev_priv->blc_adj2; - */ - adjusted_level = level * dev_priv->blc_adj2; - adjusted_level = adjusted_level / 100; -#if 0 -#ifndef CONFIG_MDFLD_DSI_DPU - if(!(dev_priv->dsr_fb_update & MDFLD_DSR_MIPI_CONTROL) && - (dev_priv->dbi_panel_on || dev_priv->dbi_panel_on2)){ - mdfld_dsi_dbi_exit_dsr(dev,MDFLD_DSR_MIPI_CONTROL, 0, 0); - dev_dbg(dev->dev, "Out of DSR before set brightness to %d.\n",adjusted_level); - } -#endif - mdfld_dsi_brightness_control(dev, 0, adjusted_level); - - if ((dev_priv->dbi_panel_on2) || (dev_priv->dpi_panel_on2)) - mdfld_dsi_brightness_control(dev, 2, adjusted_level); -#endif - gma_power_end(dev); - } - mdfld_brightness = level; - return 0; -} - -int psb_get_brightness(struct backlight_device *bd) -{ - /* return locally cached var instead of HW read (due to DPST etc.) */ - /* FIXME: ideally return actual value in case firmware fiddled with - it */ - return mdfld_brightness; -} - -static const struct backlight_ops mfld_ops = { - .get_brightness = psb_get_brightness, - .update_status = mfld_set_brightness, -}; - -static int mdfld_backlight_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct backlight_properties props; - memset(&props, 0, sizeof(struct backlight_properties)); - props.max_brightness = 100; - props.type = BACKLIGHT_PLATFORM; - - mdfld_backlight_device = backlight_device_register("mfld-bl", - NULL, (void *)dev, &mfld_ops, &props); - - if (IS_ERR(mdfld_backlight_device)) - return PTR_ERR(mdfld_backlight_device); - - dev_priv->blc_adj1 = 100; - dev_priv->blc_adj2 = 100; - mdfld_backlight_device->props.brightness = 100; - mdfld_backlight_device->props.max_brightness = 100; - backlight_update_status(mdfld_backlight_device); - dev_priv->backlight_device = mdfld_backlight_device; - return 0; -} - -#endif - -/* - * Provide the Medfield specific chip logic and low level methods for - * power management. - */ - -static void mdfld_init_pm(struct drm_device *dev) -{ - /* No work needed here yet */ -} - -/** - * mdfld_save_display_registers - save registers for pipe - * @dev: our device - * @pipe: pipe to save - * - * Save the pipe state of the device before we power it off. Keep everything - * we need to put it back again - */ -static int mdfld_save_display_registers(struct drm_device *dev, int pipe) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - int i; - - /* register */ - u32 dpll_reg = MRST_DPLL_A; - u32 fp_reg = MRST_FPA0; - u32 pipeconf_reg = PIPEACONF; - u32 htot_reg = HTOTAL_A; - u32 hblank_reg = HBLANK_A; - u32 hsync_reg = HSYNC_A; - u32 vtot_reg = VTOTAL_A; - u32 vblank_reg = VBLANK_A; - u32 vsync_reg = VSYNC_A; - u32 pipesrc_reg = PIPEASRC; - u32 dspstride_reg = DSPASTRIDE; - u32 dsplinoff_reg = DSPALINOFF; - u32 dsptileoff_reg = DSPATILEOFF; - u32 dspsize_reg = DSPASIZE; - u32 dsppos_reg = DSPAPOS; - u32 dspsurf_reg = DSPASURF; - u32 mipi_reg = MIPI; - u32 dspcntr_reg = DSPACNTR; - u32 dspstatus_reg = PIPEASTAT; - u32 palette_reg = PALETTE_A; - - /* pointer to values */ - u32 *dpll_val = &dev_priv->saveDPLL_A; - u32 *fp_val = &dev_priv->saveFPA0; - u32 *pipeconf_val = &dev_priv->savePIPEACONF; - u32 *htot_val = &dev_priv->saveHTOTAL_A; - u32 *hblank_val = &dev_priv->saveHBLANK_A; - u32 *hsync_val = &dev_priv->saveHSYNC_A; - u32 *vtot_val = &dev_priv->saveVTOTAL_A; - u32 *vblank_val = &dev_priv->saveVBLANK_A; - u32 *vsync_val = &dev_priv->saveVSYNC_A; - u32 *pipesrc_val = &dev_priv->savePIPEASRC; - u32 *dspstride_val = &dev_priv->saveDSPASTRIDE; - u32 *dsplinoff_val = &dev_priv->saveDSPALINOFF; - u32 *dsptileoff_val = &dev_priv->saveDSPATILEOFF; - u32 *dspsize_val = &dev_priv->saveDSPASIZE; - u32 *dsppos_val = &dev_priv->saveDSPAPOS; - u32 *dspsurf_val = &dev_priv->saveDSPASURF; - u32 *mipi_val = &dev_priv->saveMIPI; - u32 *dspcntr_val = &dev_priv->saveDSPACNTR; - u32 *dspstatus_val = &dev_priv->saveDSPASTATUS; - u32 *palette_val = dev_priv->save_palette_a; - - switch (pipe) { - case 0: - break; - case 1: - /* register */ - dpll_reg = MDFLD_DPLL_B; - fp_reg = MDFLD_DPLL_DIV0; - pipeconf_reg = PIPEBCONF; - htot_reg = HTOTAL_B; - hblank_reg = HBLANK_B; - hsync_reg = HSYNC_B; - vtot_reg = VTOTAL_B; - vblank_reg = VBLANK_B; - vsync_reg = VSYNC_B; - pipesrc_reg = PIPEBSRC; - dspstride_reg = DSPBSTRIDE; - dsplinoff_reg = DSPBLINOFF; - dsptileoff_reg = DSPBTILEOFF; - dspsize_reg = DSPBSIZE; - dsppos_reg = DSPBPOS; - dspsurf_reg = DSPBSURF; - dspcntr_reg = DSPBCNTR; - dspstatus_reg = PIPEBSTAT; - palette_reg = PALETTE_B; - - /* values */ - dpll_val = &dev_priv->saveDPLL_B; - fp_val = &dev_priv->saveFPB0; - pipeconf_val = &dev_priv->savePIPEBCONF; - htot_val = &dev_priv->saveHTOTAL_B; - hblank_val = &dev_priv->saveHBLANK_B; - hsync_val = &dev_priv->saveHSYNC_B; - vtot_val = &dev_priv->saveVTOTAL_B; - vblank_val = &dev_priv->saveVBLANK_B; - vsync_val = &dev_priv->saveVSYNC_B; - pipesrc_val = &dev_priv->savePIPEBSRC; - dspstride_val = &dev_priv->saveDSPBSTRIDE; - dsplinoff_val = &dev_priv->saveDSPBLINOFF; - dsptileoff_val = &dev_priv->saveDSPBTILEOFF; - dspsize_val = &dev_priv->saveDSPBSIZE; - dsppos_val = &dev_priv->saveDSPBPOS; - dspsurf_val = &dev_priv->saveDSPBSURF; - dspcntr_val = &dev_priv->saveDSPBCNTR; - dspstatus_val = &dev_priv->saveDSPBSTATUS; - palette_val = dev_priv->save_palette_b; - break; - case 2: - /* register */ - pipeconf_reg = PIPECCONF; - htot_reg = HTOTAL_C; - hblank_reg = HBLANK_C; - hsync_reg = HSYNC_C; - vtot_reg = VTOTAL_C; - vblank_reg = VBLANK_C; - vsync_reg = VSYNC_C; - pipesrc_reg = PIPECSRC; - dspstride_reg = DSPCSTRIDE; - dsplinoff_reg = DSPCLINOFF; - dsptileoff_reg = DSPCTILEOFF; - dspsize_reg = DSPCSIZE; - dsppos_reg = DSPCPOS; - dspsurf_reg = DSPCSURF; - mipi_reg = MIPI_C; - dspcntr_reg = DSPCCNTR; - dspstatus_reg = PIPECSTAT; - palette_reg = PALETTE_C; - - /* pointer to values */ - pipeconf_val = &dev_priv->savePIPECCONF; - htot_val = &dev_priv->saveHTOTAL_C; - hblank_val = &dev_priv->saveHBLANK_C; - hsync_val = &dev_priv->saveHSYNC_C; - vtot_val = &dev_priv->saveVTOTAL_C; - vblank_val = &dev_priv->saveVBLANK_C; - vsync_val = &dev_priv->saveVSYNC_C; - pipesrc_val = &dev_priv->savePIPECSRC; - dspstride_val = &dev_priv->saveDSPCSTRIDE; - dsplinoff_val = &dev_priv->saveDSPCLINOFF; - dsptileoff_val = &dev_priv->saveDSPCTILEOFF; - dspsize_val = &dev_priv->saveDSPCSIZE; - dsppos_val = &dev_priv->saveDSPCPOS; - dspsurf_val = &dev_priv->saveDSPCSURF; - mipi_val = &dev_priv->saveMIPI_C; - dspcntr_val = &dev_priv->saveDSPCCNTR; - dspstatus_val = &dev_priv->saveDSPCSTATUS; - palette_val = dev_priv->save_palette_c; - break; - default: - DRM_ERROR("%s, invalid pipe number.\n", __func__); - return -EINVAL; - } - - /* Pipe & plane A info */ - *dpll_val = PSB_RVDC32(dpll_reg); - *fp_val = PSB_RVDC32(fp_reg); - *pipeconf_val = PSB_RVDC32(pipeconf_reg); - *htot_val = PSB_RVDC32(htot_reg); - *hblank_val = PSB_RVDC32(hblank_reg); - *hsync_val = PSB_RVDC32(hsync_reg); - *vtot_val = PSB_RVDC32(vtot_reg); - *vblank_val = PSB_RVDC32(vblank_reg); - *vsync_val = PSB_RVDC32(vsync_reg); - *pipesrc_val = PSB_RVDC32(pipesrc_reg); - *dspstride_val = PSB_RVDC32(dspstride_reg); - *dsplinoff_val = PSB_RVDC32(dsplinoff_reg); - *dsptileoff_val = PSB_RVDC32(dsptileoff_reg); - *dspsize_val = PSB_RVDC32(dspsize_reg); - *dsppos_val = PSB_RVDC32(dsppos_reg); - *dspsurf_val = PSB_RVDC32(dspsurf_reg); - *dspcntr_val = PSB_RVDC32(dspcntr_reg); - *dspstatus_val = PSB_RVDC32(dspstatus_reg); - - /*save palette (gamma) */ - for (i = 0; i < 256; i++) - palette_val[i] = PSB_RVDC32(palette_reg + (i<<2)); - - if (pipe == 1) { - dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); - dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); - dev_priv->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL); - dev_priv->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL); - return 0; - } - *mipi_val = PSB_RVDC32(mipi_reg); - return 0; -} - -/** - * mdfld_save_cursor_overlay_registers - save cursor overlay info - * @dev: our device - * - * Save the cursor and overlay register state - */ -static int mdfld_save_cursor_overlay_registers(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - /* Save cursor regs */ - dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR); - dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE); - dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS); - - dev_priv->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR); - dev_priv->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE); - dev_priv->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS); - - dev_priv->saveDSPCCURSOR_CTRL = PSB_RVDC32(CURCCNTR); - dev_priv->saveDSPCCURSOR_BASE = PSB_RVDC32(CURCBASE); - dev_priv->saveDSPCCURSOR_POS = PSB_RVDC32(CURCPOS); - - /* HW overlay */ - dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD); - dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0); - dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1); - dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2); - dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3); - dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4); - dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5); - - dev_priv->saveOV_OVADD_C = PSB_RVDC32(OV_OVADD + OV_C_OFFSET); - dev_priv->saveOV_OGAMC0_C = PSB_RVDC32(OV_OGAMC0 + OV_C_OFFSET); - dev_priv->saveOV_OGAMC1_C = PSB_RVDC32(OV_OGAMC1 + OV_C_OFFSET); - dev_priv->saveOV_OGAMC2_C = PSB_RVDC32(OV_OGAMC2 + OV_C_OFFSET); - dev_priv->saveOV_OGAMC3_C = PSB_RVDC32(OV_OGAMC3 + OV_C_OFFSET); - dev_priv->saveOV_OGAMC4_C = PSB_RVDC32(OV_OGAMC4 + OV_C_OFFSET); - dev_priv->saveOV_OGAMC5_C = PSB_RVDC32(OV_OGAMC5 + OV_C_OFFSET); - - return 0; -} -/* - * mdfld_restore_display_registers - restore the state of a pipe - * @dev: our device - * @pipe: the pipe to restore - * - * Restore the state of a pipe to that which was saved by the register save - * functions. - */ -static int mdfld_restore_display_registers(struct drm_device *dev, int pipe) -{ - /* To get panel out of ULPS mode */ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dsi_config *dsi_config = NULL; - u32 i = 0; - u32 dpll = 0; - u32 timeout = 0; - u32 reg_offset = 0; - - /* register */ - u32 dpll_reg = MRST_DPLL_A; - u32 fp_reg = MRST_FPA0; - u32 pipeconf_reg = PIPEACONF; - u32 htot_reg = HTOTAL_A; - u32 hblank_reg = HBLANK_A; - u32 hsync_reg = HSYNC_A; - u32 vtot_reg = VTOTAL_A; - u32 vblank_reg = VBLANK_A; - u32 vsync_reg = VSYNC_A; - u32 pipesrc_reg = PIPEASRC; - u32 dspstride_reg = DSPASTRIDE; - u32 dsplinoff_reg = DSPALINOFF; - u32 dsptileoff_reg = DSPATILEOFF; - u32 dspsize_reg = DSPASIZE; - u32 dsppos_reg = DSPAPOS; - u32 dspsurf_reg = DSPASURF; - u32 dspstatus_reg = PIPEASTAT; - u32 mipi_reg = MIPI; - u32 dspcntr_reg = DSPACNTR; - u32 palette_reg = PALETTE_A; - - /* values */ - u32 dpll_val = dev_priv->saveDPLL_A & ~DPLL_VCO_ENABLE; - u32 fp_val = dev_priv->saveFPA0; - u32 pipeconf_val = dev_priv->savePIPEACONF; - u32 htot_val = dev_priv->saveHTOTAL_A; - u32 hblank_val = dev_priv->saveHBLANK_A; - u32 hsync_val = dev_priv->saveHSYNC_A; - u32 vtot_val = dev_priv->saveVTOTAL_A; - u32 vblank_val = dev_priv->saveVBLANK_A; - u32 vsync_val = dev_priv->saveVSYNC_A; - u32 pipesrc_val = dev_priv->savePIPEASRC; - u32 dspstride_val = dev_priv->saveDSPASTRIDE; - u32 dsplinoff_val = dev_priv->saveDSPALINOFF; - u32 dsptileoff_val = dev_priv->saveDSPATILEOFF; - u32 dspsize_val = dev_priv->saveDSPASIZE; - u32 dsppos_val = dev_priv->saveDSPAPOS; - u32 dspsurf_val = dev_priv->saveDSPASURF; - u32 dspstatus_val = dev_priv->saveDSPASTATUS; - u32 mipi_val = dev_priv->saveMIPI; - u32 dspcntr_val = dev_priv->saveDSPACNTR; - u32 *palette_val = dev_priv->save_palette_a; - - switch (pipe) { - case 0: - dsi_config = dev_priv->dsi_configs[0]; - break; - case 1: - /* register */ - dpll_reg = MDFLD_DPLL_B; - fp_reg = MDFLD_DPLL_DIV0; - pipeconf_reg = PIPEBCONF; - htot_reg = HTOTAL_B; - hblank_reg = HBLANK_B; - hsync_reg = HSYNC_B; - vtot_reg = VTOTAL_B; - vblank_reg = VBLANK_B; - vsync_reg = VSYNC_B; - pipesrc_reg = PIPEBSRC; - dspstride_reg = DSPBSTRIDE; - dsplinoff_reg = DSPBLINOFF; - dsptileoff_reg = DSPBTILEOFF; - dspsize_reg = DSPBSIZE; - dsppos_reg = DSPBPOS; - dspsurf_reg = DSPBSURF; - dspcntr_reg = DSPBCNTR; - palette_reg = PALETTE_B; - dspstatus_reg = PIPEBSTAT; - - /* values */ - dpll_val = dev_priv->saveDPLL_B & ~DPLL_VCO_ENABLE; - fp_val = dev_priv->saveFPB0; - pipeconf_val = dev_priv->savePIPEBCONF; - htot_val = dev_priv->saveHTOTAL_B; - hblank_val = dev_priv->saveHBLANK_B; - hsync_val = dev_priv->saveHSYNC_B; - vtot_val = dev_priv->saveVTOTAL_B; - vblank_val = dev_priv->saveVBLANK_B; - vsync_val = dev_priv->saveVSYNC_B; - pipesrc_val = dev_priv->savePIPEBSRC; - dspstride_val = dev_priv->saveDSPBSTRIDE; - dsplinoff_val = dev_priv->saveDSPBLINOFF; - dsptileoff_val = dev_priv->saveDSPBTILEOFF; - dspsize_val = dev_priv->saveDSPBSIZE; - dsppos_val = dev_priv->saveDSPBPOS; - dspsurf_val = dev_priv->saveDSPBSURF; - dspcntr_val = dev_priv->saveDSPBCNTR; - dspstatus_val = dev_priv->saveDSPBSTATUS; - palette_val = dev_priv->save_palette_b; - break; - case 2: - reg_offset = MIPIC_REG_OFFSET; - - /* register */ - pipeconf_reg = PIPECCONF; - htot_reg = HTOTAL_C; - hblank_reg = HBLANK_C; - hsync_reg = HSYNC_C; - vtot_reg = VTOTAL_C; - vblank_reg = VBLANK_C; - vsync_reg = VSYNC_C; - pipesrc_reg = PIPECSRC; - dspstride_reg = DSPCSTRIDE; - dsplinoff_reg = DSPCLINOFF; - dsptileoff_reg = DSPCTILEOFF; - dspsize_reg = DSPCSIZE; - dsppos_reg = DSPCPOS; - dspsurf_reg = DSPCSURF; - mipi_reg = MIPI_C; - dspcntr_reg = DSPCCNTR; - palette_reg = PALETTE_C; - dspstatus_reg = PIPECSTAT; - - /* values */ - pipeconf_val = dev_priv->savePIPECCONF; - htot_val = dev_priv->saveHTOTAL_C; - hblank_val = dev_priv->saveHBLANK_C; - hsync_val = dev_priv->saveHSYNC_C; - vtot_val = dev_priv->saveVTOTAL_C; - vblank_val = dev_priv->saveVBLANK_C; - vsync_val = dev_priv->saveVSYNC_C; - pipesrc_val = dev_priv->savePIPECSRC; - dspstride_val = dev_priv->saveDSPCSTRIDE; - dsplinoff_val = dev_priv->saveDSPCLINOFF; - dsptileoff_val = dev_priv->saveDSPCTILEOFF; - dspsize_val = dev_priv->saveDSPCSIZE; - dsppos_val = dev_priv->saveDSPCPOS; - dspsurf_val = dev_priv->saveDSPCSURF; - dspstatus_val = dev_priv->saveDSPCSTATUS; - mipi_val = dev_priv->saveMIPI_C; - dspcntr_val = dev_priv->saveDSPCCNTR; - palette_val = dev_priv->save_palette_c; - - dsi_config = dev_priv->dsi_configs[1]; - break; - default: - DRM_ERROR("%s, invalid pipe number.\n", __func__); - return -EINVAL; - } - - /* Make sure VGA plane is off. it initializes to on after reset!*/ - PSB_WVDC32(0x80000000, VGACNTRL); - if (pipe == 1) { - PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, dpll_reg); - PSB_RVDC32(dpll_reg); - - PSB_WVDC32(fp_val, fp_reg); - } else { - dpll = PSB_RVDC32(dpll_reg); - - if (!(dpll & DPLL_VCO_ENABLE)) { - - /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */ - if (dpll & MDFLD_PWR_GATE_EN) { - dpll &= ~MDFLD_PWR_GATE_EN; - PSB_WVDC32(dpll, dpll_reg); - udelay(500); /* FIXME: 1 ? */ - } - - PSB_WVDC32(fp_val, fp_reg); - PSB_WVDC32(dpll_val, dpll_reg); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - - dpll_val |= DPLL_VCO_ENABLE; - PSB_WVDC32(dpll_val, dpll_reg); - PSB_RVDC32(dpll_reg); - - /* wait for DSI PLL to lock */ - while ((timeout < 20000) && !(PSB_RVDC32(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) { - udelay(150); - timeout++; - } - - if (timeout == 20000) { - DRM_ERROR("%s, can't lock DSIPLL.\n", - __func__); - return -EINVAL; - } - } - } - /* Restore mode */ - PSB_WVDC32(htot_val, htot_reg); - PSB_WVDC32(hblank_val, hblank_reg); - PSB_WVDC32(hsync_val, hsync_reg); - PSB_WVDC32(vtot_val, vtot_reg); - PSB_WVDC32(vblank_val, vblank_reg); - PSB_WVDC32(vsync_val, vsync_reg); - PSB_WVDC32(pipesrc_val, pipesrc_reg); - PSB_WVDC32(dspstatus_val, dspstatus_reg); - - /* Set up the plane */ - PSB_WVDC32(dspstride_val, dspstride_reg); - PSB_WVDC32(dsplinoff_val, dsplinoff_reg); - PSB_WVDC32(dsptileoff_val, dsptileoff_reg); - PSB_WVDC32(dspsize_val, dspsize_reg); - PSB_WVDC32(dsppos_val, dsppos_reg); - PSB_WVDC32(dspsurf_val, dspsurf_reg); - - if (pipe == 1) { - PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL); - PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); - PSB_WVDC32(dev_priv->saveHDMIPHYMISCCTL, HDMIPHYMISCCTL); - PSB_WVDC32(dev_priv->saveHDMIB_CONTROL, HDMIB_CONTROL); - - } else { - /* Set up pipe related registers */ - PSB_WVDC32(mipi_val, mipi_reg); - /* Setup MIPI adapter + MIPI IP registers */ - mdfld_dsi_controller_init(dsi_config, pipe); - msleep(20); - } - /* Enable the plane */ - PSB_WVDC32(dspcntr_val, dspcntr_reg); - msleep(20); - /* Enable the pipe */ - PSB_WVDC32(pipeconf_val, pipeconf_reg); - - for (i = 0; i < 256; i++) - PSB_WVDC32(palette_val[i], palette_reg + (i<<2)); - if (pipe == 1) - return 0; - if (!mdfld_panel_dpi(dev)) - mdfld_enable_te(dev, pipe); - return 0; -} - -/** - * mdfld_restore_cursor_overlay_registers - restore cursor - * @dev: our device - * - * Restore the cursor and overlay state that was saved earlier - */ -static int mdfld_restore_cursor_overlay_registers(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - /* Enable Cursor A */ - PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR); - PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS); - PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE); - - PSB_WVDC32(dev_priv->saveDSPBCURSOR_CTRL, CURBCNTR); - PSB_WVDC32(dev_priv->saveDSPBCURSOR_POS, CURBPOS); - PSB_WVDC32(dev_priv->saveDSPBCURSOR_BASE, CURBBASE); - - PSB_WVDC32(dev_priv->saveDSPCCURSOR_CTRL, CURCCNTR); - PSB_WVDC32(dev_priv->saveDSPCCURSOR_POS, CURCPOS); - PSB_WVDC32(dev_priv->saveDSPCCURSOR_BASE, CURCBASE); - - /* Restore HW overlay */ - PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD); - PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0); - PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1); - PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2); - PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3); - PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4); - PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5); - - PSB_WVDC32(dev_priv->saveOV_OVADD_C, OV_OVADD + OV_C_OFFSET); - PSB_WVDC32(dev_priv->saveOV_OGAMC0_C, OV_OGAMC0 + OV_C_OFFSET); - PSB_WVDC32(dev_priv->saveOV_OGAMC1_C, OV_OGAMC1 + OV_C_OFFSET); - PSB_WVDC32(dev_priv->saveOV_OGAMC2_C, OV_OGAMC2 + OV_C_OFFSET); - PSB_WVDC32(dev_priv->saveOV_OGAMC3_C, OV_OGAMC3 + OV_C_OFFSET); - PSB_WVDC32(dev_priv->saveOV_OGAMC4_C, OV_OGAMC4 + OV_C_OFFSET); - PSB_WVDC32(dev_priv->saveOV_OGAMC5_C, OV_OGAMC5 + OV_C_OFFSET); - - return 0; -} - -/** - * mdfld_save_display_registers - save registers lost on suspend - * @dev: our DRM device - * - * Save the state we need in order to be able to restore the interface - * upon resume from suspend - */ -static int mdfld_save_registers(struct drm_device *dev) -{ - /* FIXME: We need to shut down panels here if using them - and once the right bits are merged */ - mdfld_save_cursor_overlay_registers(dev); - mdfld_save_display_registers(dev, 0); - mdfld_save_display_registers(dev, 0); - mdfld_save_display_registers(dev, 2); - mdfld_save_display_registers(dev, 1); - mdfld_disable_crtc(dev, 0); - mdfld_disable_crtc(dev, 2); - mdfld_disable_crtc(dev, 1); - return 0; -} - -/** - * mdfld_restore_display_registers - restore lost register state - * @dev: our DRM device - * - * Restore register state that was lost during suspend and resume. - */ -static int mdfld_restore_registers(struct drm_device *dev) -{ - mdfld_restore_display_registers(dev, 1); - mdfld_restore_display_registers(dev, 0); - mdfld_restore_display_registers(dev, 2); - mdfld_restore_cursor_overlay_registers(dev); - return 0; -} - -static int mdfld_power_down(struct drm_device *dev) -{ - /* FIXME */ - return 0; -} - -static int mdfld_power_up(struct drm_device *dev) -{ - /* FIXME */ - return 0; -} - -const struct psb_ops mdfld_chip_ops = { - .name = "Medfield", - .accel_2d = 0, - .pipes = 3, - .crtcs = 2, - .sgx_offset = MRST_SGX_OFFSET, - - .chip_setup = mid_chip_setup, - - .crtc_helper = &mdfld_helper_funcs, - .crtc_funcs = &mdfld_intel_crtc_funcs, - - .output_init = mdfld_output_init, - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - .backlight_init = mdfld_backlight_init, -#endif - - .init_pm = mdfld_init_pm, - .save_regs = mdfld_save_registers, - .restore_regs = mdfld_restore_registers, - .power_down = mdfld_power_down, - .power_up = mdfld_power_up, -}; - diff --git a/drivers/staging/gma500/mdfld_dsi_dbi.c b/drivers/staging/gma500/mdfld_dsi_dbi.c deleted file mode 100644 index fd211f3467c4..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_dbi.c +++ /dev/null @@ -1,761 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * Jackie Li - */ - -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dbi_dpu.h" -#include "mdfld_dsi_pkg_sender.h" - -#include "power.h" -#include - -int enable_gfx_rtpm; - -extern struct drm_device *gpDrmDevice; -extern int gfxrtdelay; -int enter_dsr; -struct mdfld_dsi_dbi_output *gdbi_output; -extern bool gbgfxsuspended; -extern int enable_gfx_rtpm; -extern int gfxrtdelay; - -#define MDFLD_DSR_MAX_IDLE_COUNT 2 - -/* - * set refreshing area - */ -int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output, - u16 x1, u16 y1, u16 x2, u16 y2) -{ - struct mdfld_dsi_pkg_sender *sender = - mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base); - u8 param[4]; - u8 cmd; - int err; - - if (!sender) { - WARN_ON(1); - return -EINVAL; - } - - /* Set column */ - cmd = DCS_SET_COLUMN_ADDRESS; - param[0] = x1 >> 8; - param[1] = x1; - param[2] = x2 >> 8; - param[3] = x2; - - err = mdfld_dsi_send_dcs(sender, - cmd, - param, - 4, - CMD_DATA_SRC_SYSTEM_MEM, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(sender->dev->dev, "DCS 0x%x sent failed\n", cmd); - goto err_out; - } - - /* Set page */ - cmd = DCS_SET_PAGE_ADDRESS; - param[0] = y1 >> 8; - param[1] = y1; - param[2] = y2 >> 8; - param[3] = y2; - - err = mdfld_dsi_send_dcs(sender, - cmd, - param, - 4, - CMD_DATA_SRC_SYSTEM_MEM, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(sender->dev->dev, "DCS 0x%x sent failed\n", cmd); - goto err_out; - } - - /*update screen*/ - err = mdfld_dsi_send_dcs(sender, - write_mem_start, - NULL, - 0, - CMD_DATA_SRC_PIPE, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(sender->dev->dev, "DCS 0x%x sent failed\n", cmd); - goto err_out; - } - mdfld_dsi_cmds_kick_out(sender); -err_out: - return err; -} - -/* - * set panel's power state - */ -int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output, - int mode) -{ - struct drm_device *dev = dbi_output->dev; - struct mdfld_dsi_pkg_sender *sender = - mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base); - u8 param = 0; - u32 err = 0; - - if (!sender) { - WARN_ON(1); - return -EINVAL; - } - - if (mode == DRM_MODE_DPMS_ON) { - /* Exit sleep mode */ - err = mdfld_dsi_send_dcs(sender, - DCS_EXIT_SLEEP_MODE, - NULL, - 0, - CMD_DATA_SRC_SYSTEM_MEM, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(dev->dev, "DCS 0x%x sent failed\n", - DCS_EXIT_SLEEP_MODE); - goto power_err; - } - - /* Set display on */ - err = mdfld_dsi_send_dcs(sender, - DCS_SET_DISPLAY_ON, - NULL, - 0, - CMD_DATA_SRC_SYSTEM_MEM, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(dev->dev, "DCS 0x%x sent failed\n", - DCS_SET_DISPLAY_ON); - goto power_err; - } - - /* set tear effect on */ - err = mdfld_dsi_send_dcs(sender, - DCS_SET_TEAR_ON, - ¶m, - 1, - CMD_DATA_SRC_SYSTEM_MEM, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(dev->dev, "DCS 0x%x sent failed\n", - set_tear_on); - goto power_err; - } - - /** - * FIXME: remove this later - */ - err = mdfld_dsi_send_dcs(sender, - DCS_WRITE_MEM_START, - NULL, - 0, - CMD_DATA_SRC_PIPE, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(dev->dev, "DCS 0x%x sent failed\n", - DCS_WRITE_MEM_START); - goto power_err; - } - } else { - /* Set tear effect off */ - err = mdfld_dsi_send_dcs(sender, - DCS_SET_TEAR_OFF, - NULL, - 0, - CMD_DATA_SRC_SYSTEM_MEM, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(dev->dev, "DCS 0x%x sent failed\n", - DCS_SET_TEAR_OFF); - goto power_err; - } - - /* Turn display off */ - err = mdfld_dsi_send_dcs(sender, - DCS_SET_DISPLAY_OFF, - NULL, - 0, - CMD_DATA_SRC_SYSTEM_MEM, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(dev->dev, "DCS 0x%x sent failed\n", - DCS_SET_DISPLAY_OFF); - goto power_err; - } - - /* Now enter sleep mode */ - err = mdfld_dsi_send_dcs(sender, - DCS_ENTER_SLEEP_MODE, - NULL, - 0, - CMD_DATA_SRC_SYSTEM_MEM, - MDFLD_DSI_QUEUE_PACKAGE); - if (err) { - dev_err(dev->dev, "DCS 0x%x sent failed\n", - DCS_ENTER_SLEEP_MODE); - goto power_err; - } - } - mdfld_dsi_cmds_kick_out(sender); -power_err: - return err; -} - -/* - * send a generic DCS command with a parameter list - */ -int mdfld_dsi_dbi_send_dcs(struct mdfld_dsi_dbi_output *dbi_output, - u8 dcs, u8 *param, u32 num, u8 data_src) -{ - struct mdfld_dsi_pkg_sender *sender = - mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base); - int ret; - - if (!sender) { - WARN_ON(1); - return -EINVAL; - } - - ret = mdfld_dsi_send_dcs(sender, - dcs, - param, - num, - data_src, - MDFLD_DSI_SEND_PACKAGE); - - return ret; -} - -/* - * Enter DSR - */ -void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe) -{ - u32 reg_val; - struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc = dbi_output->base.base.crtc; - struct psb_intel_crtc *psb_crtc = (crtc) ? - to_psb_intel_crtc(crtc) : NULL; - u32 dpll_reg = MRST_DPLL_A; - u32 pipeconf_reg = PIPEACONF; - u32 dspcntr_reg = DSPACNTR; - - if (!dbi_output) - return; - - /* FIXME check if can go */ - dev_priv->is_in_idle = true; - - gdbi_output = dbi_output; - if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) || - (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING)) - return; - - if (pipe == 2) { - dpll_reg = MRST_DPLL_A; - pipeconf_reg = PIPECCONF; - dspcntr_reg = DSPCCNTR; - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - /* Disable te interrupts */ - mdfld_disable_te(dev, pipe); - - /* Disable plane */ - reg_val = REG_READ(dspcntr_reg); - if (!(reg_val & DISPLAY_PLANE_ENABLE)) { - REG_WRITE(dspcntr_reg, reg_val & ~DISPLAY_PLANE_ENABLE); - REG_READ(dspcntr_reg); - } - - /* Disable pipe */ - reg_val = REG_READ(pipeconf_reg); - if (!(reg_val & DISPLAY_PLANE_ENABLE)) { - reg_val &= ~DISPLAY_PLANE_ENABLE; - reg_val |= (PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF); - REG_WRITE(pipeconf_reg, reg_val); - REG_READ(pipeconf_reg); - mdfldWaitForPipeDisable(dev, pipe); - } - - /* Disable DPLL */ - reg_val = REG_READ(dpll_reg); - if (!(reg_val & DPLL_VCO_ENABLE)) { - reg_val &= ~DPLL_VCO_ENABLE; - REG_WRITE(dpll_reg, reg_val); - REG_READ(dpll_reg); - udelay(500); - } - - gma_power_end(dev); - dbi_output->mode_flags |= MODE_SETTING_IN_DSR; - if (pipe == 2) { - enter_dsr = 1; - /* pm_schedule_suspend(&dev->pdev->dev, gfxrtdelay); */ - } -} - -static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, - int pipe) -{ - struct drm_device *dev = dbi_output->dev; - struct drm_crtc *crtc = dbi_output->base.base.crtc; - struct psb_intel_crtc *psb_crtc = (crtc) ? - to_psb_intel_crtc(crtc) : NULL; - u32 reg_val; - u32 dpll_reg = MRST_DPLL_A; - u32 pipeconf_reg = PIPEACONF; - u32 dspcntr_reg = DSPACNTR; - u32 reg_offset = 0; - - /*if mode setting on-going, back off*/ - if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) || - (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING)) - return; - - if (pipe == 2) { - dpll_reg = MRST_DPLL_A; - pipeconf_reg = PIPECCONF; - dspcntr_reg = DSPCCNTR; - reg_offset = MIPIC_REG_OFFSET; - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - /* Enable DPLL */ - reg_val = REG_READ(dpll_reg); - if (!(reg_val & DPLL_VCO_ENABLE)) { - if (reg_val & MDFLD_PWR_GATE_EN) { - reg_val &= ~MDFLD_PWR_GATE_EN; - REG_WRITE(dpll_reg, reg_val); - REG_READ(dpll_reg); - udelay(500); - } - - reg_val |= DPLL_VCO_ENABLE; - REG_WRITE(dpll_reg, reg_val); - REG_READ(dpll_reg); - udelay(500); - - /* Add timeout */ - while (!(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) - cpu_relax(); - } - - /* Enable pipe */ - reg_val = REG_READ(pipeconf_reg); - if (!(reg_val & PIPEACONF_ENABLE)) { - reg_val |= PIPEACONF_ENABLE; - REG_WRITE(pipeconf_reg, reg_val); - REG_READ(pipeconf_reg); - udelay(500); - mdfldWaitForPipeEnable(dev, pipe); - } - - /* Enable plane */ - reg_val = REG_READ(dspcntr_reg); - if (!(reg_val & DISPLAY_PLANE_ENABLE)) { - reg_val |= DISPLAY_PLANE_ENABLE; - REG_WRITE(dspcntr_reg, reg_val); - REG_READ(dspcntr_reg); - udelay(500); - } - - /* Enable TE interrupt on this pipe */ - mdfld_enable_te(dev, pipe); - gma_power_end(dev); - - /*clean IN_DSR flag*/ - dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR; -} - -/* - * Exit from DSR - */ -void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info; - struct mdfld_dsi_dbi_output **dbi_output; - int i; - int pipe; - - /* FIXME can go ? */ - dev_priv->is_in_idle = false; - dbi_output = dsr_info->dbi_outputs; - -#ifdef CONFIG_PM_RUNTIME - if (!enable_gfx_rtpm) { -/* pm_runtime_allow(&gpDrmDevice->pdev->dev); */ -/* schedule_delayed_work(&rtpm_work, 30 * 1000);*/ /* FIXME: HZ ? */ - } -#endif - - /* For each output, exit dsr */ - for (i = 0; i < dsr_info->dbi_output_num; i++) { - /* If panel has been turned off, skip */ - if (!dbi_output[i] || !dbi_output[i]->dbi_panel_on) - continue; - pipe = dbi_output[i]->channel_num ? 2 : 0; - enter_dsr = 0; - mdfld_dbi_output_exit_dsr(dbi_output[i], pipe); - } - dev_priv->dsr_fb_update |= update_src; -} - -static bool mdfld_dbi_is_in_dsr(struct drm_device *dev) -{ - if (REG_READ(MRST_DPLL_A) & DPLL_VCO_ENABLE) - return false; - if ((REG_READ(PIPEACONF) & PIPEACONF_ENABLE) || - (REG_READ(PIPECCONF) & PIPEACONF_ENABLE)) - return false; - if ((REG_READ(DSPACNTR) & DISPLAY_PLANE_ENABLE) || - (REG_READ(DSPCCNTR) & DISPLAY_PLANE_ENABLE)) - return false; - - return true; -} - -/* Periodically update dbi panel */ -void mdfld_dbi_update_panel(struct drm_device *dev, int pipe) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info; - struct mdfld_dsi_dbi_output **dbi_outputs; - struct mdfld_dsi_dbi_output *dbi_output; - int i; - int can_enter_dsr = 0; - u32 damage_mask; - - dbi_outputs = dsr_info->dbi_outputs; - dbi_output = pipe ? dbi_outputs[1] : dbi_outputs[0]; - - if (!dbi_output) - return; - - if (pipe == 0) - damage_mask = dev_priv->dsr_fb_update & MDFLD_DSR_DAMAGE_MASK_0; - else if (pipe == 2) - damage_mask = dev_priv->dsr_fb_update & MDFLD_DSR_DAMAGE_MASK_2; - else - return; - - /* If FB is damaged and panel is on update on-panel FB */ - if (damage_mask && dbi_output->dbi_panel_on) { - dbi_output->dsr_fb_update_done = false; - - if (dbi_output->p_funcs->update_fb) - dbi_output->p_funcs->update_fb(dbi_output, pipe); - - if (dev_priv->dsr_enable && dbi_output->dsr_fb_update_done) - dev_priv->dsr_fb_update &= ~damage_mask; - - /*clean IN_DSR flag*/ - dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR; - - dbi_output->dsr_idle_count = 0; - } else { - dbi_output->dsr_idle_count++; - } - - switch (dsr_info->dbi_output_num) { - case 1: - if (dbi_output->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT) - can_enter_dsr = 1; - break; - case 2: - if (dbi_outputs[0]->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT - && dbi_outputs[1]->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT) - can_enter_dsr = 1; - break; - default: - DRM_ERROR("Wrong DBI output number\n"); - } - - /* Try to enter DSR */ - if (can_enter_dsr) { - for (i = 0; i < dsr_info->dbi_output_num; i++) { - if (!mdfld_dbi_is_in_dsr(dev) && dbi_outputs[i] && - !(dbi_outputs[i]->mode_flags & MODE_SETTING_ON_GOING)) { - mdfld_dsi_dbi_enter_dsr(dbi_outputs[i], - dbi_outputs[i]->channel_num ? 2 : 0); -#if 0 - enter_dsr = 1; - pr_err("%s: enter_dsr = 1\n", __func__); -#endif - } - } - /*schedule rpm suspend after gfxrtdelay*/ -#ifdef CONFIG_GFX_RTPM - if (!dev_priv->rpm_enabled - || !enter_dsr - /* || (REG_READ(HDMIB_CONTROL) & HDMIB_PORT_EN) */ - || pm_schedule_suspend(&dev->pdev->dev, gfxrtdelay)) - dev_warn(dev->dev, - "Runtime PM schedule suspend failed, rpm %d\n", - dev_priv->rpm_enabled); -#endif - } -} - -int mdfld_dbi_dsr_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info; - - if (!dsr_info || IS_ERR(dsr_info)) { - dsr_info = kzalloc(sizeof(struct mdfld_dbi_dsr_info), - GFP_KERNEL); - if (!dsr_info) { - dev_err(dev->dev, "No memory\n"); - return -ENOMEM; - } - dev_priv->dbi_dsr_info = dsr_info; - } - return 0; -} - -void mdfld_dbi_dsr_exit(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info; - - if (dsr_info) { - kfree(dsr_info); - dev_priv->dbi_dsr_info = NULL; - } -} - -void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config, - int pipe) -{ - struct drm_device *dev = dsi_config->dev; - u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - int lane_count = dsi_config->lane_count; - u32 val = 0; - - dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe); - - /* Un-ready device */ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); - - /* Init dsi adapter before kicking off */ - REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018); - - /* TODO: figure out how to setup these registers */ - REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408); - REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), - 0x000a0014); - REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400); - REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000001); - REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000); - - /* Enable all interrupts */ - REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff); - /* Max value: 20 clock cycles of txclkesc */ - REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f); - /* Min 21 txclkesc, max: ffffh */ - REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff); - /* Min: 7d0 max: 4e20 */ - REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0); - - /* Set up func_prg */ - val |= lane_count; - val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET); - val |= DSI_DBI_COLOR_FORMAT_OPTION2; - REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val); - - REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff); - REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff); - - /* De-assert dbi_stall when half of DBI FIFO is empty */ - /* REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000000); */ - - REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46); - REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000); - REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004); - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001); -} - -#if 0 -/*DBI encoder helper funcs*/ -static const struct drm_encoder_helper_funcs mdfld_dsi_dbi_helper_funcs = { - .dpms = mdfld_dsi_dbi_dpms, - .mode_fixup = mdfld_dsi_dbi_mode_fixup, - .prepare = mdfld_dsi_dbi_prepare, - .mode_set = mdfld_dsi_dbi_mode_set, - .commit = mdfld_dsi_dbi_commit, -}; - -/*DBI encoder funcs*/ -static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -#endif - -/* - * Init DSI DBI encoder. - * Allocate an mdfld_dsi_encoder and attach it to given @dsi_connector - * return pointer of newly allocated DBI encoder, NULL on error - */ -struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev, - struct mdfld_dsi_connector *dsi_connector, - struct panel_funcs *p_funcs) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dsi_dbi_output *dbi_output = NULL; - struct mdfld_dsi_config *dsi_config; - struct drm_connector *connector = NULL; - struct drm_encoder *encoder = NULL; - struct drm_display_mode *fixed_mode = NULL; - struct psb_gtt *pg = dev_priv ? (&dev_priv->gtt) : NULL; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv ? (dev_priv->dbi_dpu_info) : NULL; - struct mdfld_dbi_dsr_info *dsr_info = dev_priv ? (dev_priv->dbi_dsr_info) : NULL; - u32 data = 0; - int pipe; - int ret; - - if (!pg || !dsi_connector || !p_funcs) { - WARN_ON(1); - return NULL; - } - - dsi_config = mdfld_dsi_get_config(dsi_connector); - pipe = dsi_connector->pipe; - - /*panel hard-reset*/ - if (p_funcs->reset) { - ret = p_funcs->reset(pipe); - if (ret) { - DRM_ERROR("Panel %d hard-reset failed\n", pipe); - return NULL; - } - } - /* Panel drvIC init */ - if (p_funcs->drv_ic_init) - p_funcs->drv_ic_init(dsi_config, pipe); - - /* Panel power mode detect */ - ret = mdfld_dsi_get_power_mode(dsi_config, - &data, - MDFLD_DSI_HS_TRANSMISSION); - if (ret) { - DRM_ERROR("Panel %d get power mode failed\n", pipe); - dsi_connector->status = connector_status_disconnected; - } else { - DRM_INFO("pipe %d power mode 0x%x\n", pipe, data); - dsi_connector->status = connector_status_connected; - } - - /*TODO: get panel info from DDB*/ - - dbi_output = kzalloc(sizeof(struct mdfld_dsi_dbi_output), GFP_KERNEL); - if (!dbi_output) { - dev_err(dev->dev, "No memory\n"); - return NULL; - } - - if (dsi_connector->pipe == 0) { - dbi_output->channel_num = 0; - dev_priv->dbi_output = dbi_output; - } else if (dsi_connector->pipe == 2) { - dbi_output->channel_num = 1; - dev_priv->dbi_output2 = dbi_output; - } else { - dev_err(dev->dev, "only support 2 DSI outputs\n"); - goto out_err1; - } - - dbi_output->dev = dev; - dbi_output->p_funcs = p_funcs; - fixed_mode = dsi_config->fixed_mode; - dbi_output->panel_fixed_mode = fixed_mode; - - /* Create drm encoder object */ - connector = &dsi_connector->base.base; - encoder = &dbi_output->base.base; - /* Review this if we ever get MIPI-HDMI bridges or similar */ - drm_encoder_init(dev, - encoder, - p_funcs->encoder_funcs, - DRM_MODE_ENCODER_LVDS); - drm_encoder_helper_add(encoder, p_funcs->encoder_helper_funcs); - - /* Attach to given connector */ - drm_mode_connector_attach_encoder(connector, encoder); - - /* Set possible CRTCs and clones */ - if (dsi_connector->pipe) { - encoder->possible_crtcs = (1 << 2); - encoder->possible_clones = (1 << 1); - } else { - encoder->possible_crtcs = (1 << 0); - encoder->possible_clones = (1 << 0); - } - - dev_priv->dsr_fb_update = 0; - dev_priv->dsr_enable = false; - dev_priv->exit_idle = mdfld_dsi_dbi_exit_dsr; - - dbi_output->first_boot = true; - dbi_output->mode_flags = MODE_SETTING_IN_ENCODER; - - /* Add this output to dpu_info if in DPU mode */ - if (dpu_info && dsi_connector->status == connector_status_connected) { - if (dsi_connector->pipe == 0) - dpu_info->dbi_outputs[0] = dbi_output; - else - dpu_info->dbi_outputs[1] = dbi_output; - - dpu_info->dbi_output_num++; - } else if (dsi_connector->status == connector_status_connected) { - /* Add this output to dsr_info if not */ - if (dsi_connector->pipe == 0) - dsr_info->dbi_outputs[0] = dbi_output; - else - dsr_info->dbi_outputs[1] = dbi_output; - - dsr_info->dbi_output_num++; - } - return &dbi_output->base; -out_err1: - kfree(dbi_output); - return NULL; -} diff --git a/drivers/staging/gma500/mdfld_dsi_dbi.h b/drivers/staging/gma500/mdfld_dsi_dbi.h deleted file mode 100644 index f0fa986fd934..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_dbi.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * Jackie Li - */ - -#ifndef __MDFLD_DSI_DBI_H__ -#define __MDFLD_DSI_DBI_H__ - -#include -#include -#include -#include -#include - -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "power.h" - -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" - -/* - * DBI encoder which inherits from mdfld_dsi_encoder - */ -struct mdfld_dsi_dbi_output { - struct mdfld_dsi_encoder base; - struct drm_display_mode *panel_fixed_mode; - u8 last_cmd; - u8 lane_count; - u8 channel_num; - struct drm_device *dev; - - /* Backlight operations */ - - /* DSR timer */ - u32 dsr_idle_count; - bool dsr_fb_update_done; - - /* Mode setting flags */ - u32 mode_flags; - - /* Panel status */ - bool dbi_panel_on; - bool first_boot; - struct panel_funcs *p_funcs; - - /* DPU */ - u32 *dbi_cb_addr; - u32 dbi_cb_phy; - spinlock_t cb_lock; - u32 cb_write; -}; - -#define MDFLD_DSI_DBI_OUTPUT(dsi_encoder) \ - container_of(dsi_encoder, struct mdfld_dsi_dbi_output, base) - -struct mdfld_dbi_dsr_info { - int dbi_output_num; - struct mdfld_dsi_dbi_output *dbi_outputs[2]; - - u32 dsr_idle_count; -}; - -#define DBI_CB_TIMEOUT_COUNT 0xffff - -/* Offsets */ -#define CMD_MEM_ADDR_OFFSET 0 - -#define CMD_DATA_SRC_SYSTEM_MEM 0 -#define CMD_DATA_SRC_PIPE 1 - -static inline int mdfld_dsi_dbi_fifo_ready(struct mdfld_dsi_dbi_output *dbi_output) -{ - struct drm_device *dev = dbi_output->dev; - u32 retry = DBI_CB_TIMEOUT_COUNT; - int reg_offset = (dbi_output->channel_num == 1) ? MIPIC_REG_OFFSET : 0; - int ret = 0; - - /* Query the dbi fifo status*/ - while (retry--) { - if (REG_READ(MIPIA_GEN_FIFO_STAT_REG + reg_offset) & (1 << 27)) - break; - } - - if (!retry) { - DRM_ERROR("Timeout waiting for DBI FIFO empty\n"); - ret = -EAGAIN; - } - return ret; -} - -static inline int mdfld_dsi_dbi_cmd_sent(struct mdfld_dsi_dbi_output *dbi_output) -{ - struct drm_device *dev = dbi_output->dev; - u32 retry = DBI_CB_TIMEOUT_COUNT; - int reg_offset = (dbi_output->channel_num == 1) ? MIPIC_REG_OFFSET : 0; - int ret = 0; - - /* Query the command execution status */ - while (retry--) - if (!(REG_READ(MIPIA_CMD_ADD_REG + reg_offset) & (1 << 0))) - break; - - if (!retry) { - DRM_ERROR("Timeout waiting for DBI command status\n"); - ret = -EAGAIN; - } - - return ret; -} - -static inline int mdfld_dsi_dbi_cb_ready(struct mdfld_dsi_dbi_output *dbi_output) -{ - int ret = 0; - - /* Query the command execution status*/ - ret = mdfld_dsi_dbi_cmd_sent(dbi_output); - if (ret) { - DRM_ERROR("Peripheral is busy\n"); - ret = -EAGAIN; - } - /* Query the dbi fifo status*/ - ret = mdfld_dsi_dbi_fifo_ready(dbi_output); - if (ret) { - DRM_ERROR("DBI FIFO is not empty\n"); - ret = -EAGAIN; - } - return ret; -} - -extern void mdfld_dsi_dbi_output_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev, int pipe); -extern void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src); -extern void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, - int pipe); -extern int mdfld_dbi_dsr_init(struct drm_device *dev); -extern void mdfld_dbi_dsr_exit(struct drm_device *dev); -extern struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev, - struct mdfld_dsi_connector *dsi_connector, - struct panel_funcs *p_funcs); -extern int mdfld_dsi_dbi_send_dcs(struct mdfld_dsi_dbi_output *dbi_output, - u8 dcs, u8 *param, u32 num, u8 data_src); -extern int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output, - u16 x1, u16 y1, u16 x2, u16 y2); -extern int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output, - int mode); -extern void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config, - int pipe); - -#endif /*__MDFLD_DSI_DBI_H__*/ diff --git a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.c b/drivers/staging/gma500/mdfld_dsi_dbi_dpu.c deleted file mode 100644 index a4e2ff442b1f..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.c +++ /dev/null @@ -1,778 +0,0 @@ -/* - * Copyright © 2010-2011 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Jim Liu - * Jackie Li - */ - -#include "mdfld_dsi_dbi_dpu.h" -#include "mdfld_dsi_dbi.h" - -/* - * NOTE: all mdlfd_x_damage funcs should be called by holding dpu_update_lock - */ - -static int mdfld_cursor_damage(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *damaged_rect) -{ - int x, y; - int new_x, new_y; - struct psb_drm_dpu_rect *rect; - struct psb_drm_dpu_rect *pipe_rect; - int cursor_size; - struct mdfld_cursor_info *cursor; - mdfld_plane_t fb_plane; - - if (plane == MDFLD_CURSORA) { - cursor = &dpu_info->cursors[0]; - x = dpu_info->cursors[0].x; - y = dpu_info->cursors[0].y; - cursor_size = dpu_info->cursors[0].size; - pipe_rect = &dpu_info->damage_pipea; - fb_plane = MDFLD_PLANEA; - } else { - cursor = &dpu_info->cursors[1]; - x = dpu_info->cursors[1].x; - y = dpu_info->cursors[1].y; - cursor_size = dpu_info->cursors[1].size; - pipe_rect = &dpu_info->damage_pipec; - fb_plane = MDFLD_PLANEC; - } - new_x = damaged_rect->x; - new_y = damaged_rect->y; - - if (x == new_x && y == new_y) - return 0; - - rect = &dpu_info->damaged_rects[plane]; - /* Move to right */ - if (new_x >= x) { - if (new_y > y) { - rect->x = x; - rect->y = y; - rect->width = (new_x + cursor_size) - x; - rect->height = (new_y + cursor_size) - y; - goto cursor_out; - } else { - rect->x = x; - rect->y = new_y; - rect->width = (new_x + cursor_size) - x; - rect->height = (y - new_y); - goto cursor_out; - } - } else { - if (new_y > y) { - rect->x = new_x; - rect->y = y; - rect->width = (x + cursor_size) - new_x; - rect->height = new_y - y; - goto cursor_out; - } else { - rect->x = new_x; - rect->y = new_y; - rect->width = (x + cursor_size) - new_x; - rect->height = (y + cursor_size) - new_y; - } - } -cursor_out: - if (new_x < 0) - cursor->x = 0; - else if (new_x > 864) - cursor->x = 864; - else - cursor->x = new_x; - - if (new_y < 0) - cursor->y = 0; - else if (new_y > 480) - cursor->y = 480; - else - cursor->y = new_y; - - /* - * FIXME: this is a workaround for cursor plane update, - * remove it later! - */ - rect->x = 0; - rect->y = 0; - rect->width = 864; - rect->height = 480; - - mdfld_check_boundary(dpu_info, rect); - mdfld_dpu_region_extent(pipe_rect, rect); - - /* Update pending status of dpu_info */ - dpu_info->pending |= (1 << plane); - /* Update fb panel as well */ - dpu_info->pending |= (1 << fb_plane); - return 0; -} - -static int mdfld_fb_damage(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *damaged_rect) -{ - struct psb_drm_dpu_rect *rect; - - if (plane == MDFLD_PLANEA) - rect = &dpu_info->damage_pipea; - else - rect = &dpu_info->damage_pipec; - - mdfld_check_boundary(dpu_info, damaged_rect); - - /* Add fb damage area to this pipe */ - mdfld_dpu_region_extent(rect, damaged_rect); - - /* Update pending status of dpu_info */ - dpu_info->pending |= (1 << plane); - return 0; -} - -/* Do nothing here, right now */ -static int mdfld_overlay_damage(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *damaged_rect) -{ - return 0; -} - -int mdfld_dbi_dpu_report_damage(struct drm_device *dev, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *rect) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - int ret = 0; - - /* DPU not in use, no damage reporting needed */ - if (dpu_info == NULL) - return 0; - - spin_lock(&dpu_info->dpu_update_lock); - - switch (plane) { - case MDFLD_PLANEA: - case MDFLD_PLANEC: - mdfld_fb_damage(dpu_info, plane, rect); - break; - case MDFLD_CURSORA: - case MDFLD_CURSORC: - mdfld_cursor_damage(dpu_info, plane, rect); - break; - case MDFLD_OVERLAYA: - case MDFLD_OVERLAYC: - mdfld_overlay_damage(dpu_info, plane, rect); - break; - default: - DRM_ERROR("Invalid plane type %d\n", plane); - ret = -EINVAL; - } - spin_unlock(&dpu_info->dpu_update_lock); - return ret; -} - -int mdfld_dbi_dpu_report_fullscreen_damage(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv; - struct mdfld_dbi_dpu_info *dpu_info; - struct mdfld_dsi_config *dsi_config; - struct psb_drm_dpu_rect rect; - int i; - - if (!dev) { - DRM_ERROR("Invalid parameter\n"); - return -EINVAL; - } - - dev_priv = dev->dev_private; - dpu_info = dev_priv->dbi_dpu_info; - - /* This is fine - we may be in non DPU mode */ - if (!dpu_info) - return -EINVAL; - - for (i = 0; i < dpu_info->dbi_output_num; i++) { - dsi_config = dev_priv->dsi_configs[i]; - if (dsi_config) { - rect.x = rect.y = 0; - rect.width = dsi_config->fixed_mode->hdisplay; - rect.height = dsi_config->fixed_mode->vdisplay; - mdfld_dbi_dpu_report_damage(dev, - i ? (MDFLD_PLANEC) : (MDFLD_PLANEA), - &rect); - } - } - /* Exit DSR state */ - mdfld_dpu_exit_dsr(dev); - return 0; -} - -int mdfld_dsi_dbi_dsr_off(struct drm_device *dev, - struct psb_drm_dpu_rect *rect) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, rect); - - /* If dual display mode */ - if (dpu_info->dbi_output_num == 2) - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, rect); - - /* Force dsi to exit DSR mode */ - mdfld_dpu_exit_dsr(dev); - return 0; -} - -static void mdfld_dpu_cursor_plane_flush(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane) -{ - struct drm_device *dev = dpu_info->dev; - u32 curpos_reg = CURAPOS; - u32 curbase_reg = CURABASE; - u32 curcntr_reg = CURACNTR; - struct mdfld_cursor_info *cursor = &dpu_info->cursors[0]; - - if (plane == MDFLD_CURSORC) { - curpos_reg = CURCPOS; - curbase_reg = CURCBASE; - curcntr_reg = CURCCNTR; - cursor = &dpu_info->cursors[1]; - } - - REG_WRITE(curcntr_reg, REG_READ(curcntr_reg)); - REG_WRITE(curpos_reg, - (((cursor->x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) | - ((cursor->y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT))); - REG_WRITE(curbase_reg, REG_READ(curbase_reg)); -} - -static void mdfld_dpu_fb_plane_flush(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane) -{ - u32 pipesrc_reg = PIPEASRC; - u32 dspsize_reg = DSPASIZE; - u32 dspoff_reg = DSPALINOFF; - u32 dspsurf_reg = DSPASURF; - u32 dspstride_reg = DSPASTRIDE; - u32 stride; - struct psb_drm_dpu_rect *rect = &dpu_info->damage_pipea; - struct drm_device *dev = dpu_info->dev; - - if (plane == MDFLD_PLANEC) { - pipesrc_reg = PIPECSRC; - dspsize_reg = DSPCSIZE; - dspoff_reg = DSPCLINOFF; - dspsurf_reg = DSPCSURF; - dspstride_reg = DSPCSTRIDE; - rect = &dpu_info->damage_pipec; - } - - stride = REG_READ(dspstride_reg); - /* FIXME: should I do the pipe src update here? */ - REG_WRITE(pipesrc_reg, ((rect->width - 1) << 16) | (rect->height - 1)); - /* Flush plane */ - REG_WRITE(dspsize_reg, ((rect->height - 1) << 16) | (rect->width - 1)); - REG_WRITE(dspoff_reg, ((rect->x * 4) + (rect->y * stride))); - REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg)); - - /* - * TODO: wait for flip finished and restore the pipesrc reg, - * or cursor will be show at a wrong position - */ -} - -static void mdfld_dpu_overlay_plane_flush(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane) -{ -} - -/* - * TODO: we are still in dbi normal mode now, we will try to use partial - * mode later. - */ -static int mdfld_dbi_prepare_cb(struct mdfld_dsi_dbi_output *dbi_output, - struct mdfld_dbi_dpu_info *dpu_info, int pipe) -{ - u8 *cb_addr = (u8 *)dbi_output->dbi_cb_addr; - u32 *index; - struct psb_drm_dpu_rect *rect = pipe ? - (&dpu_info->damage_pipec) : (&dpu_info->damage_pipea); - - /* FIXME: lock command buffer, this may lead to a deadlock, - as we already hold the dpu_update_lock */ - if (!spin_trylock(&dbi_output->cb_lock)) { - DRM_ERROR("lock command buffer failed, try again\n"); - return -EAGAIN; - } - - index = &dbi_output->cb_write; - - if (*index) { - DRM_ERROR("DBI command buffer unclean\n"); - return -EAGAIN; - } - - /* Column address */ - *(cb_addr + ((*index)++)) = set_column_address; - *(cb_addr + ((*index)++)) = rect->x >> 8; - *(cb_addr + ((*index)++)) = rect->x; - *(cb_addr + ((*index)++)) = (rect->x + rect->width - 1) >> 8; - *(cb_addr + ((*index)++)) = (rect->x + rect->width - 1); - - *index = 8; - - /* Page address */ - *(cb_addr + ((*index)++)) = set_page_addr; - *(cb_addr + ((*index)++)) = rect->y >> 8; - *(cb_addr + ((*index)++)) = rect->y; - *(cb_addr + ((*index)++)) = (rect->y + rect->height - 1) >> 8; - *(cb_addr + ((*index)++)) = (rect->y + rect->height - 1); - - *index = 16; - - /*write memory*/ - *(cb_addr + ((*index)++)) = write_mem_start; - - return 0; -} - -static int mdfld_dbi_flush_cb(struct mdfld_dsi_dbi_output *dbi_output, int pipe) -{ - u32 cmd_phy = dbi_output->dbi_cb_phy; - u32 *index = &dbi_output->cb_write; - int reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - struct drm_device *dev = dbi_output->dev; - - if (*index == 0 || !dbi_output) - return 0; - - REG_WRITE((MIPIA_CMD_LEN_REG + reg_offset), 0x010505); - REG_WRITE((MIPIA_CMD_ADD_REG + reg_offset), cmd_phy | 3); - - *index = 0; - - /* FIXME: unlock command buffer */ - spin_unlock(&dbi_output->cb_lock); - return 0; -} - -static int mdfld_dpu_update_pipe(struct mdfld_dsi_dbi_output *dbi_output, - struct mdfld_dbi_dpu_info *dpu_info, int pipe) -{ - struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - mdfld_plane_t cursor_plane = MDFLD_CURSORA; - mdfld_plane_t fb_plane = MDFLD_PLANEA; - mdfld_plane_t overlay_plane = MDFLD_OVERLAYA; - int ret = 0; - u32 plane_mask = MDFLD_PIPEA_PLANE_MASK; - - /* Damaged rects on this pipe */ - if (pipe) { - cursor_plane = MDFLD_CURSORC; - fb_plane = MDFLD_PLANEC; - overlay_plane = MDFLD_OVERLAYC; - plane_mask = MDFLD_PIPEC_PLANE_MASK; - } - - /*update cursor which assigned to @pipe*/ - if (dpu_info->pending & (1 << cursor_plane)) - mdfld_dpu_cursor_plane_flush(dpu_info, cursor_plane); - - /*update fb which assigned to @pipe*/ - if (dpu_info->pending & (1 << fb_plane)) - mdfld_dpu_fb_plane_flush(dpu_info, fb_plane); - - /* TODO: update overlay */ - if (dpu_info->pending & (1 << overlay_plane)) - mdfld_dpu_overlay_plane_flush(dpu_info, overlay_plane); - - /* Flush damage area to panel fb */ - if (dpu_info->pending & plane_mask) { - ret = mdfld_dbi_prepare_cb(dbi_output, dpu_info, pipe); - /* - * TODO: remove b_dsr_enable later, - * added it so that text console could boot smoothly - */ - /* Clean pending flags on this pipe */ - if (!ret && dev_priv->dsr_enable) { - dpu_info->pending &= ~plane_mask; - /* Reset overlay pipe damage rect */ - mdfld_dpu_init_damage(dpu_info, pipe); - } - } - return ret; -} - -static int mdfld_dpu_update_fb(struct drm_device *dev) -{ - struct drm_crtc *crtc; - struct psb_intel_crtc *psb_crtc; - struct mdfld_dsi_dbi_output **dbi_output; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - bool pipe_updated[2]; - unsigned long irq_flags; - u32 dpll_reg = MRST_DPLL_A; - u32 dspcntr_reg = DSPACNTR; - u32 pipeconf_reg = PIPEACONF; - u32 dsplinoff_reg = DSPALINOFF; - u32 dspsurf_reg = DSPASURF; - u32 mipi_state_reg = MIPIA_INTR_STAT_REG; - u32 reg_offset = 0; - int pipe; - int i; - int ret; - - dbi_output = dpu_info->dbi_outputs; - pipe_updated[0] = pipe_updated[1] = false; - - if (!gma_power_begin(dev, true)) - return -EAGAIN; - - /* Try to prevent any new damage reports */ - if (!spin_trylock_irqsave(&dpu_info->dpu_update_lock, irq_flags)) - return -EAGAIN; - - for (i = 0; i < dpu_info->dbi_output_num; i++) { - crtc = dbi_output[i]->base.base.crtc; - psb_crtc = (crtc) ? to_psb_intel_crtc(crtc) : NULL; - - pipe = dbi_output[i]->channel_num ? 2 : 0; - - if (pipe == 2) { - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - dsplinoff_reg = DSPCLINOFF; - dspsurf_reg = DSPCSURF; - reg_offset = MIPIC_REG_OFFSET; - } - - if (!(REG_READ((MIPIA_GEN_FIFO_STAT_REG + reg_offset)) - & (1 << 27)) || - !(REG_READ(dpll_reg) & DPLL_VCO_ENABLE) || - !(REG_READ(dspcntr_reg) & DISPLAY_PLANE_ENABLE) || - !(REG_READ(pipeconf_reg) & DISPLAY_PLANE_ENABLE)) { - dev_err(dev->dev, - "DBI FIFO is busy, DSI %d state %x\n", - pipe, - REG_READ(mipi_state_reg + reg_offset)); - continue; - } - - /* - * If DBI output is in a exclusive state then the pipe - * change won't be updated - */ - if (dbi_output[i]->dbi_panel_on && - !(dbi_output[i]->mode_flags & MODE_SETTING_ON_GOING) && - !(psb_crtc && - psb_crtc->mode_flags & MODE_SETTING_ON_GOING) && - !(dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR)) { - ret = mdfld_dpu_update_pipe(dbi_output[i], - dpu_info, dbi_output[i]->channel_num ? 2 : 0); - if (!ret) - pipe_updated[i] = true; - } - } - - for (i = 0; i < dpu_info->dbi_output_num; i++) - if (pipe_updated[i]) - mdfld_dbi_flush_cb(dbi_output[i], - dbi_output[i]->channel_num ? 2 : 0); - - spin_unlock_irqrestore(&dpu_info->dpu_update_lock, irq_flags); - gma_power_end(dev); - return 0; -} - -static int __mdfld_dbi_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, - int pipe) -{ - struct drm_device *dev = dbi_output->dev; - struct drm_crtc *crtc = dbi_output->base.base.crtc; - struct psb_intel_crtc *psb_crtc = (crtc) ? to_psb_intel_crtc(crtc) - : NULL; - u32 reg_val; - u32 dpll_reg = MRST_DPLL_A; - u32 pipeconf_reg = PIPEACONF; - u32 dspcntr_reg = DSPACNTR; - u32 dspbase_reg = DSPABASE; - u32 dspsurf_reg = DSPASURF; - u32 reg_offset = 0; - - if (!dbi_output) - return 0; - - /* If mode setting on-going, back off */ - if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) || - (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING)) - return -EAGAIN; - - if (pipe == 2) { - dpll_reg = MRST_DPLL_A; - pipeconf_reg = PIPECCONF; - dspcntr_reg = DSPCCNTR; - dspbase_reg = MDFLD_DSPCBASE; - dspsurf_reg = DSPCSURF; - - reg_offset = MIPIC_REG_OFFSET; - } - - if (!gma_power_begin(dev, true)) - return -EAGAIN; - - /* Enable DPLL */ - reg_val = REG_READ(dpll_reg); - if (!(reg_val & DPLL_VCO_ENABLE)) { - - if (reg_val & MDFLD_PWR_GATE_EN) { - reg_val &= ~MDFLD_PWR_GATE_EN; - REG_WRITE(dpll_reg, reg_val); - REG_READ(dpll_reg); - udelay(500); - } - - reg_val |= DPLL_VCO_ENABLE; - REG_WRITE(dpll_reg, reg_val); - REG_READ(dpll_reg); - udelay(500); - - /* FIXME: add timeout */ - while (!(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) - cpu_relax(); - } - - /* Enable pipe */ - reg_val = REG_READ(pipeconf_reg); - if (!(reg_val & PIPEACONF_ENABLE)) { - reg_val |= PIPEACONF_ENABLE; - REG_WRITE(pipeconf_reg, reg_val); - REG_READ(pipeconf_reg); - udelay(500); - mdfldWaitForPipeEnable(dev, pipe); - } - - /* Enable plane */ - reg_val = REG_READ(dspcntr_reg); - if (!(reg_val & DISPLAY_PLANE_ENABLE)) { - reg_val |= DISPLAY_PLANE_ENABLE; - REG_WRITE(dspcntr_reg, reg_val); - REG_READ(dspcntr_reg); - udelay(500); - } - - gma_power_end(dev); - - /* Clean IN_DSR flag */ - dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR; - - return 0; -} - -int mdfld_dpu_exit_dsr(struct drm_device *dev) -{ - struct mdfld_dsi_dbi_output **dbi_output; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - int i; - int pipe; - - dbi_output = dpu_info->dbi_outputs; - - for (i = 0; i < dpu_info->dbi_output_num; i++) { - /* If this output is not in DSR mode, don't call exit dsr */ - if (dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR) - __mdfld_dbi_exit_dsr(dbi_output[i], - dbi_output[i]->channel_num ? 2 : 0); - } - - /* Enable TE interrupt */ - for (i = 0; i < dpu_info->dbi_output_num; i++) { - /* If this output is not in DSR mode, don't call exit dsr */ - pipe = dbi_output[i]->channel_num ? 2 : 0; - if (dbi_output[i]->dbi_panel_on && pipe) { - mdfld_disable_te(dev, 0); - mdfld_enable_te(dev, 2); - } else if (dbi_output[i]->dbi_panel_on && !pipe) { - mdfld_disable_te(dev, 2); - mdfld_enable_te(dev, 0); - } - } - return 0; -} - -static int mdfld_dpu_enter_dsr(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - struct mdfld_dsi_dbi_output **dbi_output; - int i; - - dbi_output = dpu_info->dbi_outputs; - - for (i = 0; i < dpu_info->dbi_output_num; i++) { - /* If output is off or already in DSR state, don't re-enter */ - if (dbi_output[i]->dbi_panel_on && - !(dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR)) { - mdfld_dsi_dbi_enter_dsr(dbi_output[i], - dbi_output[i]->channel_num ? 2 : 0); - } - } - - return 0; -} - -static void mdfld_dbi_dpu_timer_func(unsigned long data) -{ - struct drm_device *dev = (struct drm_device *)data; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - struct timer_list *dpu_timer = &dpu_info->dpu_timer; - unsigned long flags; - - if (dpu_info->pending) { - dpu_info->idle_count = 0; - /* Update panel fb with damaged area */ - mdfld_dpu_update_fb(dev); - } else { - dpu_info->idle_count++; - } - - if (dpu_info->idle_count >= MDFLD_MAX_IDLE_COUNT) { - mdfld_dpu_enter_dsr(dev); - /* Stop timer by return */ - return; - } - - spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags); - if (!timer_pending(dpu_timer)) { - dpu_timer->expires = jiffies + MDFLD_DSR_DELAY; - add_timer(dpu_timer); - } - spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags); -} - -void mdfld_dpu_update_panel(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - - if (dpu_info->pending) { - dpu_info->idle_count = 0; - - /*update panel fb with damaged area*/ - mdfld_dpu_update_fb(dev); - } else { - dpu_info->idle_count++; - } - - if (dpu_info->idle_count >= MDFLD_MAX_IDLE_COUNT) { - /*enter dsr*/ - mdfld_dpu_enter_dsr(dev); - } -} - -static int mdfld_dbi_dpu_timer_init(struct drm_device *dev, - struct mdfld_dbi_dpu_info *dpu_info) -{ - struct timer_list *dpu_timer = &dpu_info->dpu_timer; - unsigned long flags; - - spin_lock_init(&dpu_info->dpu_timer_lock); - spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags); - - init_timer(dpu_timer); - - dpu_timer->data = (unsigned long)dev; - dpu_timer->function = mdfld_dbi_dpu_timer_func; - dpu_timer->expires = jiffies + MDFLD_DSR_DELAY; - - spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags); - - return 0; -} - -void mdfld_dbi_dpu_timer_start(struct mdfld_dbi_dpu_info *dpu_info) -{ - struct timer_list *dpu_timer = &dpu_info->dpu_timer; - unsigned long flags; - - spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags); - if (!timer_pending(dpu_timer)) { - dpu_timer->expires = jiffies + MDFLD_DSR_DELAY; - add_timer(dpu_timer); - } - spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags); -} - -int mdfld_dbi_dpu_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - - if (!dpu_info || IS_ERR(dpu_info)) { - dpu_info = kzalloc(sizeof(struct mdfld_dbi_dpu_info), - GFP_KERNEL); - if (!dpu_info) { - DRM_ERROR("No memory\n"); - return -ENOMEM; - } - dev_priv->dbi_dpu_info = dpu_info; - } - - dpu_info->dev = dev; - - dpu_info->cursors[0].size = MDFLD_CURSOR_SIZE; - dpu_info->cursors[1].size = MDFLD_CURSOR_SIZE; - - /*init dpu_update_lock*/ - spin_lock_init(&dpu_info->dpu_update_lock); - - /*init dpu refresh timer*/ - mdfld_dbi_dpu_timer_init(dev, dpu_info); - - /*init pipe damage area*/ - mdfld_dpu_init_damage(dpu_info, 0); - mdfld_dpu_init_damage(dpu_info, 2); - - return 0; -} - -void mdfld_dbi_dpu_exit(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - - if (!dpu_info) - return; - - del_timer_sync(&dpu_info->dpu_timer); - kfree(dpu_info); - dev_priv->dbi_dpu_info = NULL; -} - - diff --git a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h b/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h deleted file mode 100644 index 42367ed48c08..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * Jackie Li - */ - -#ifndef __MDFLD_DSI_DBI_DPU_H__ -#define __MDFLD_DSI_DBI_DPU_H__ - -#include "mdfld_dsi_dbi.h" - -typedef enum { - MDFLD_PLANEA, - MDFLD_PLANEC, - MDFLD_CURSORA, - MDFLD_CURSORC, - MDFLD_OVERLAYA, - MDFLD_OVERLAYC, - MDFLD_PLANE_NUM, -} mdfld_plane_t; - -#define MDFLD_PIPEA_PLANE_MASK 0x15 -#define MDFLD_PIPEC_PLANE_MASK 0x2A - -struct mdfld_cursor_info { - int x, y; - int size; -}; - -#define MDFLD_CURSOR_SIZE 64 - -/* - * enter DSR mode if screen has no update for 2 frames. - */ -#define MDFLD_MAX_IDLE_COUNT 2 - -struct mdfld_dbi_dpu_info { - struct drm_device *dev; - /* Lock */ - spinlock_t dpu_update_lock; - - /* Cursor postion */ - struct mdfld_cursor_info cursors[2]; - - /* Damaged area for each plane */ - struct psb_drm_dpu_rect damaged_rects[MDFLD_PLANE_NUM]; - - /* Final damaged area */ - struct psb_drm_dpu_rect damage_pipea; - struct psb_drm_dpu_rect damage_pipec; - - /* Pending */ - u32 pending; - - /* DPU timer */ - struct timer_list dpu_timer; - spinlock_t dpu_timer_lock; - - /* DPU idle count */ - u32 idle_count; - - /* DSI outputs */ - struct mdfld_dsi_dbi_output *dbi_outputs[2]; - int dbi_output_num; -}; - -static inline int mdfld_dpu_region_extent(struct psb_drm_dpu_rect *origin, - struct psb_drm_dpu_rect *rect) -{ - int x1, y1, x2, y2; - - x1 = origin->x + origin->width; - y1 = origin->y + origin->height; - - x2 = rect->x + rect->width; - y2 = rect->y + rect->height; - - origin->x = min(origin->x, rect->x); - origin->y = min(origin->y, rect->y); - origin->width = max(x1, x2) - origin->x; - origin->height = max(y1, y2) - origin->y; - - return 0; -} - -static inline void mdfld_check_boundary(struct mdfld_dbi_dpu_info *dpu_info, - struct psb_drm_dpu_rect *rect) -{ - if (rect->x < 0) - rect->x = 0; - if (rect->y < 0) - rect->y = 0; - - if (rect->x + rect->width > 864) - rect->width = 864 - rect->x; - if (rect->y + rect->height > 480) - rect->height = 480 - rect->height; - - if (!rect->width) - rect->width = 1; - if (!rect->height) - rect->height = 1; -} - -static inline void mdfld_dpu_init_damage(struct mdfld_dbi_dpu_info *dpu_info, - int pipe) -{ - struct psb_drm_dpu_rect *rect; - - if (pipe == 0) - rect = &dpu_info->damage_pipea; - else - rect = &dpu_info->damage_pipec; - - rect->x = 864; - rect->y = 480; - rect->width = -864; - rect->height = -480; -} - -extern int mdfld_dsi_dbi_dsr_off(struct drm_device *dev, - struct psb_drm_dpu_rect *rect); -extern int mdfld_dbi_dpu_report_damage(struct drm_device *dev, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *rect); -extern int mdfld_dbi_dpu_report_fullscreen_damage(struct drm_device *dev); -extern int mdfld_dpu_exit_dsr(struct drm_device *dev); -extern void mdfld_dbi_dpu_timer_start(struct mdfld_dbi_dpu_info *dpu_info); -extern int mdfld_dbi_dpu_init(struct drm_device *dev); -extern void mdfld_dbi_dpu_exit(struct drm_device *dev); -extern void mdfld_dpu_update_panel(struct drm_device *dev); - -#endif /*__MDFLD_DSI_DBI_DPU_H__*/ diff --git a/drivers/staging/gma500/mdfld_dsi_dpi.c b/drivers/staging/gma500/mdfld_dsi_dpi.c deleted file mode 100644 index e685f1217baa..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_dpi.c +++ /dev/null @@ -1,805 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * Jackie Li - */ - -#include "mdfld_dsi_dpi.h" -#include "mdfld_output.h" -#include "mdfld_dsi_pkg_sender.h" - - -static void mdfld_wait_for_HS_DATA_FIFO(struct drm_device *dev, u32 pipe) -{ - u32 gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG; - int timeout = 0; - - if (pipe == 2) - gen_fifo_stat_reg += MIPIC_REG_OFFSET; - - udelay(500); - - /* This will time out after approximately 2+ seconds */ - while ((timeout < 20000) && (REG_READ(gen_fifo_stat_reg) & DSI_FIFO_GEN_HS_DATA_FULL)) { - udelay(100); - timeout++; - } - - if (timeout == 20000) - dev_warn(dev->dev, "MIPI: HS Data FIFO was never cleared!\n"); -} - -static void mdfld_wait_for_HS_CTRL_FIFO(struct drm_device *dev, u32 pipe) -{ - u32 gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG; - int timeout = 0; - - if (pipe == 2) - gen_fifo_stat_reg += MIPIC_REG_OFFSET; - - udelay(500); - - /* This will time out after approximately 2+ seconds */ - while ((timeout < 20000) && (REG_READ(gen_fifo_stat_reg) & DSI_FIFO_GEN_HS_CTRL_FULL)) { - udelay(100); - timeout++; - } - if (timeout == 20000) - dev_warn(dev->dev, "MIPI: HS CMD FIFO was never cleared!\n"); -} - -static void mdfld_wait_for_DPI_CTRL_FIFO(struct drm_device *dev, u32 pipe) -{ - u32 gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG; - int timeout = 0; - - if (pipe == 2) - gen_fifo_stat_reg += MIPIC_REG_OFFSET; - - udelay(500); - - /* This will time out after approximately 2+ seconds */ - while ((timeout < 20000) && ((REG_READ(gen_fifo_stat_reg) & DPI_FIFO_EMPTY) - != DPI_FIFO_EMPTY)) { - udelay(100); - timeout++; - } - - if (timeout == 20000) - dev_warn(dev->dev, "MIPI: DPI FIFO was never cleared!\n"); -} - -static void mdfld_wait_for_SPL_PKG_SENT(struct drm_device *dev, u32 pipe) -{ - u32 intr_stat_reg = MIPIA_INTR_STAT_REG; - int timeout = 0; - - if (pipe == 2) - intr_stat_reg += MIPIC_REG_OFFSET; - - udelay(500); - - /* This will time out after approximately 2+ seconds */ - while ((timeout < 20000) && (!(REG_READ(intr_stat_reg) & DSI_INTR_STATE_SPL_PKG_SENT))) { - udelay(100); - timeout++; - } - - if (timeout == 20000) - dev_warn(dev->dev, "MIPI: SPL_PKT_SENT_INTERRUPT was not sent successfully!\n"); -} - - -/* ************************************************************************* *\ - * FUNCTION: mdfld_dsi_tpo_ic_init - * - * DESCRIPTION: This function is called only by mrst_dsi_mode_set and - * restore_display_registers. since this function does not - * acquire the mutex, it is important that the calling function - * does! -\* ************************************************************************* */ -void mdfld_dsi_tpo_ic_init(struct mdfld_dsi_config *dsi_config, u32 pipe) -{ - struct drm_device *dev = dsi_config->dev; - u32 dcsChannelNumber = dsi_config->channel_num; - u32 gen_data_reg = MIPIA_HS_GEN_DATA_REG; - u32 gen_ctrl_reg = MIPIA_HS_GEN_CTRL_REG; - u32 gen_ctrl_val = GEN_LONG_WRITE; - - if (pipe == 2) { - gen_data_reg = HS_GEN_DATA_REG + MIPIC_REG_OFFSET; - gen_ctrl_reg = HS_GEN_CTRL_REG + MIPIC_REG_OFFSET; - } - - gen_ctrl_val |= dcsChannelNumber << DCS_CHANNEL_NUMBER_POS; - - /* Flip page order */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x00008036); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x02 << WORD_COUNTS_POS)); - - /* 0xF0 */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x005a5af0); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS)); - - /* Write protection key */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x005a5af1); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS)); - - /* 0xFC */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x005a5afc); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS)); - - /* 0xB7 */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x770000b7); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x00000044); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x05 << WORD_COUNTS_POS)); - - /* 0xB6 */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x000a0ab6); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS)); - - /* 0xF2 */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x081010f2); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x4a070708); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x000000c5); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x09 << WORD_COUNTS_POS)); - - /* 0xF8 */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x024003f8); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x01030a04); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x0e020220); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x00000004); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x0d << WORD_COUNTS_POS)); - - /* 0xE2 */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x398fc3e2); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x0000916f); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x06 << WORD_COUNTS_POS)); - - /* 0xB0 */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x000000b0); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x02 << WORD_COUNTS_POS)); - - /* 0xF4 */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x240242f4); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x78ee2002); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x2a071050); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x507fee10); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x10300710); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x14 << WORD_COUNTS_POS)); - - /* 0xBA */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x19fe07ba); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x101c0a31); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x00000010); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x09 << WORD_COUNTS_POS)); - - /* 0xBB */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x28ff07bb); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x24280a31); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x00000034); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x09 << WORD_COUNTS_POS)); - - /* 0xFB */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x535d05fb); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x1b1a2130); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x221e180e); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x131d2120); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x535d0508); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x1c1a2131); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x231f160d); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x111b2220); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x535c2008); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x1f1d2433); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x2c251a10); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x2c34372d); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x00000023); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x31 << WORD_COUNTS_POS)); - - /* 0xFA */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x525c0bfa); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x1c1c232f); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x2623190e); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x18212625); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x545d0d0e); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x1e1d2333); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x26231a10); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x1a222725); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x545d280f); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x21202635); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x31292013); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x31393d33); - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x00000029); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x31 << WORD_COUNTS_POS)); - - /* Set DM */ - mdfld_wait_for_HS_DATA_FIFO(dev, pipe); - REG_WRITE(gen_data_reg, 0x000100f7); - mdfld_wait_for_HS_CTRL_FIFO(dev, pipe); - REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS)); -} - -static u16 mdfld_dsi_dpi_to_byte_clock_count(int pixel_clock_count, - int num_lane, int bpp) -{ - return (u16)((pixel_clock_count * bpp) / (num_lane * 8)); -} - -/* - * Calculate the dpi time basing on a given drm mode @mode - * return 0 on success. - * FIXME: I was using proposed mode value for calculation, may need to - * use crtc mode values later - */ -int mdfld_dsi_dpi_timing_calculation(struct drm_display_mode *mode, - struct mdfld_dsi_dpi_timing *dpi_timing, - int num_lane, int bpp) -{ - int pclk_hsync, pclk_hfp, pclk_hbp, pclk_hactive; - int pclk_vsync, pclk_vfp, pclk_vbp, pclk_vactive; - - if(!mode || !dpi_timing) { - DRM_ERROR("Invalid parameter\n"); - return -EINVAL; - } - - pclk_hactive = mode->hdisplay; - pclk_hfp = mode->hsync_start - mode->hdisplay; - pclk_hsync = mode->hsync_end - mode->hsync_start; - pclk_hbp = mode->htotal - mode->hsync_end; - - pclk_vactive = mode->vdisplay; - pclk_vfp = mode->vsync_start - mode->vdisplay; - pclk_vsync = mode->vsync_end - mode->vsync_start; - pclk_vbp = mode->vtotal - mode->vsync_end; - - /* - * byte clock counts were calculated by following formula - * bclock_count = pclk_count * bpp / num_lane / 8 - */ - dpi_timing->hsync_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_hsync, num_lane, bpp); - dpi_timing->hbp_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_hbp, num_lane, bpp); - dpi_timing->hfp_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_hfp, num_lane, bpp); - dpi_timing->hactive_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_hactive, num_lane, bpp); - dpi_timing->vsync_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_vsync, num_lane, bpp); - dpi_timing->vbp_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_vbp, num_lane, bpp); - dpi_timing->vfp_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_vfp, num_lane, bpp); - - return 0; -} - -void mdfld_dsi_dpi_controller_init(struct mdfld_dsi_config *dsi_config, int pipe) -{ - struct drm_device *dev = dsi_config->dev; - u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - int lane_count = dsi_config->lane_count; - struct mdfld_dsi_dpi_timing dpi_timing; - struct drm_display_mode *mode = dsi_config->mode; - u32 val = 0; - - /*un-ready device*/ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); - - /*init dsi adapter before kicking off*/ - REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018); - - /*enable all interrupts*/ - REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff); - - - /*set up func_prg*/ - val |= lane_count; - val |= dsi_config->channel_num << DSI_DPI_VIRT_CHANNEL_OFFSET; - - switch(dsi_config->bpp) { - case 16: - val |= DSI_DPI_COLOR_FORMAT_RGB565; - break; - case 18: - val |= DSI_DPI_COLOR_FORMAT_RGB666; - break; - case 24: - val |= DSI_DPI_COLOR_FORMAT_RGB888; - break; - default: - DRM_ERROR("unsupported color format, bpp = %d\n", dsi_config->bpp); - } - REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val); - - REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), - (mode->vtotal * mode->htotal * dsi_config->bpp / (8 * lane_count)) & DSI_HS_TX_TIMEOUT_MASK); - REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff & DSI_LP_RX_TIMEOUT_MASK); - - /*max value: 20 clock cycles of txclkesc*/ - REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x14 & DSI_TURN_AROUND_TIMEOUT_MASK); - - /*min 21 txclkesc, max: ffffh*/ - REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0xffff & DSI_RESET_TIMER_MASK); - - REG_WRITE((MIPIA_DPI_RESOLUTION_REG + reg_offset), mode->vdisplay << 16 | mode->hdisplay); - - /*set DPI timing registers*/ - mdfld_dsi_dpi_timing_calculation(mode, &dpi_timing, dsi_config->lane_count, dsi_config->bpp); - - REG_WRITE((MIPIA_HSYNC_COUNT_REG + reg_offset), dpi_timing.hsync_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_HBP_COUNT_REG + reg_offset), dpi_timing.hbp_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_HFP_COUNT_REG + reg_offset), dpi_timing.hfp_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_HACTIVE_COUNT_REG + reg_offset), dpi_timing.hactive_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_VSYNC_COUNT_REG + reg_offset), dpi_timing.vsync_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_VBP_COUNT_REG + reg_offset), dpi_timing.vbp_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_VFP_COUNT_REG + reg_offset), dpi_timing.vfp_count & DSI_DPI_TIMING_MASK); - - REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46); - - /*min: 7d0 max: 4e20*/ - REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x000007d0); - - /*set up video mode*/ - val = 0; - val = dsi_config->video_mode | DSI_DPI_COMPLETE_LAST_LINE; - REG_WRITE((MIPIA_VIDEO_MODE_FORMAT_REG + reg_offset), val); - - REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000); - - REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004); - - /*TODO: figure out how to setup these registers*/ - REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408); - - REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), (0xa << 16) | 0x14); - /*set device ready*/ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001); -} - -void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output, int pipe) -{ - struct drm_device *dev = output->dev; - u32 reg_offset = 0; - - if(output->panel_on) - return; - - if(pipe) - reg_offset = MIPIC_REG_OFFSET; - - /* clear special packet sent bit */ - if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) { - REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), DSI_INTR_STATE_SPL_PKG_SENT); - } - - /*send turn on package*/ - REG_WRITE((MIPIA_DPI_CONTROL_REG + reg_offset), DSI_DPI_CTRL_HS_TURN_ON); - - /*wait for SPL_PKG_SENT interrupt*/ - mdfld_wait_for_SPL_PKG_SENT(dev, pipe); - - if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) { - REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), DSI_INTR_STATE_SPL_PKG_SENT); - } - - output->panel_on = 1; - - /* FIXME the following is disabled to WA the X slow start issue for TMD panel */ - /* if(pipe == 2) */ - /* dev_priv->dpi_panel_on2 = true; */ - /* else if (pipe == 0) */ - /* dev_priv->dpi_panel_on = true; */ -} - -static void mdfld_dsi_dpi_shut_down(struct mdfld_dsi_dpi_output *output, int pipe) -{ - struct drm_device *dev = output->dev; - u32 reg_offset = 0; - - /*if output is on, or mode setting didn't happen, ignore this*/ - if((!output->panel_on) || output->first_boot) { - output->first_boot = 0; - return; - } - - if(pipe) - reg_offset = MIPIC_REG_OFFSET; - - /* Wait for dpi fifo to empty */ - mdfld_wait_for_DPI_CTRL_FIFO(dev, pipe); - - /* Clear the special packet interrupt bit if set */ - if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) { - REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), DSI_INTR_STATE_SPL_PKG_SENT); - } - - if(REG_READ(MIPIA_DPI_CONTROL_REG + reg_offset) == DSI_DPI_CTRL_HS_SHUTDOWN) { - dev_warn(dev->dev, "try to send the same package again, abort!"); - goto shutdown_out; - } - - REG_WRITE((MIPIA_DPI_CONTROL_REG + reg_offset), DSI_DPI_CTRL_HS_SHUTDOWN); - -shutdown_out: - output->panel_on = 0; - output->first_boot = 0; - - /* FIXME the following is disabled to WA the X slow start issue for TMD panel */ - /* if(pipe == 2) */ - /* dev_priv->dpi_panel_on2 = false; */ - /* else if (pipe == 0) */ - /* dev_priv->dpi_panel_on = false; */ - /* #ifdef CONFIG_PM_RUNTIME*/ - /* if (drm_psb_ospm && !enable_gfx_rtpm) { */ - /* pm_runtime_allow(&gpDrmDevice->pdev->dev); */ - /* schedule_delayed_work(&dev_priv->rtpm_work, 30 * 1000); */ - /* } */ - /*if (enable_gfx_rtpm) */ - /* pm_schedule_suspend(&dev->pdev->dev, gfxrtdelay); */ - /* #endif */ -} - -void mdfld_dsi_dpi_set_power(struct drm_encoder *encoder, bool on) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dpi_output *dpi_output = MDFLD_DSI_DPI_OUTPUT(dsi_encoder); - struct mdfld_dsi_config *dsi_config = mdfld_dsi_encoder_get_config(dsi_encoder); - int pipe = mdfld_dsi_encoder_get_pipe(dsi_encoder); - struct drm_device *dev = dsi_config->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 mipi_reg = MIPI; - u32 pipeconf_reg = PIPEACONF; - - if(pipe) { - mipi_reg = MIPI_C; - pipeconf_reg = PIPECCONF; - } - - /* Start up display island if it was shutdown */ - if (!gma_power_begin(dev, true)) - return; - - if(on) { - if (mdfld_get_panel_type(dev, pipe) == TMD_VID){ - mdfld_dsi_dpi_turn_on(dpi_output, pipe); - } else { - /* Enable mipi port */ - REG_WRITE(mipi_reg, (REG_READ(mipi_reg) | (1 << 31))); - REG_READ(mipi_reg); - - mdfld_dsi_dpi_turn_on(dpi_output, pipe); - mdfld_dsi_tpo_ic_init(dsi_config, pipe); - } - - if(pipe == 2) { - dev_priv->dpi_panel_on2 = true; - } - else { - dev_priv->dpi_panel_on = true; - } - - } else { - if (mdfld_get_panel_type(dev, pipe) == TMD_VID) { - mdfld_dsi_dpi_shut_down(dpi_output, pipe); - } else { - mdfld_dsi_dpi_shut_down(dpi_output, pipe); - /* Disable mipi port */ - REG_WRITE(mipi_reg, (REG_READ(mipi_reg) & ~(1<<31))); - REG_READ(mipi_reg); - } - - if(pipe == 2) - dev_priv->dpi_panel_on2 = false; - else - dev_priv->dpi_panel_on = false; - } - gma_power_end(dev); -} - -void mdfld_dsi_dpi_dpms(struct drm_encoder *encoder, int mode) -{ - dev_dbg(encoder->dev->dev, "DPMS %s\n", - (mode == DRM_MODE_DPMS_ON ? "on":"off")); - - if (mode == DRM_MODE_DPMS_ON) - mdfld_dsi_dpi_set_power(encoder, true); - else { - mdfld_dsi_dpi_set_power(encoder, false); -#if 0 /* FIXME */ -#ifdef CONFIG_PM_RUNTIME - if (enable_gfx_rtpm) - pm_schedule_suspend(&gpDrmDevice->pdev->dev, gfxrtdelay); -#endif -#endif - } -} - -bool mdfld_dsi_dpi_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_config *dsi_config = mdfld_dsi_encoder_get_config(dsi_encoder); - struct drm_display_mode *fixed_mode = dsi_config->fixed_mode; - - if(fixed_mode) { - adjusted_mode->hdisplay = fixed_mode->hdisplay; - adjusted_mode->hsync_start = fixed_mode->hsync_start; - adjusted_mode->hsync_end = fixed_mode->hsync_end; - adjusted_mode->htotal = fixed_mode->htotal; - adjusted_mode->vdisplay = fixed_mode->vdisplay; - adjusted_mode->vsync_start = fixed_mode->vsync_start; - adjusted_mode->vsync_end = fixed_mode->vsync_end; - adjusted_mode->vtotal = fixed_mode->vtotal; - adjusted_mode->clock = fixed_mode->clock; - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - } - - return true; -} - -void mdfld_dsi_dpi_prepare(struct drm_encoder *encoder) -{ - mdfld_dsi_dpi_set_power(encoder, false); -} - -void mdfld_dsi_dpi_commit(struct drm_encoder *encoder) -{ - mdfld_dsi_dpi_set_power(encoder, true); -} - -void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dpi_output *dpi_output = MDFLD_DSI_DPI_OUTPUT(dsi_encoder); - struct mdfld_dsi_config *dsi_config = mdfld_dsi_encoder_get_config(dsi_encoder); - struct drm_device *dev = dsi_config->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - int pipe = mdfld_dsi_encoder_get_pipe(dsi_encoder); - - u32 pipeconf_reg = PIPEACONF; - u32 dspcntr_reg = DSPACNTR; - u32 mipi_reg = MIPI; - u32 reg_offset = 0; - - u32 pipeconf = dev_priv->pipeconf; - u32 dspcntr = dev_priv->dspcntr; - u32 mipi = MIPI_PORT_EN | PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX; - - dev_dbg(dev->dev, "set mode %dx%d on pipe %d\n", - mode->hdisplay, mode->vdisplay, pipe); - - if(pipe) { - pipeconf_reg = PIPECCONF; - dspcntr_reg = DSPCCNTR; - mipi_reg = MIPI_C; - reg_offset = MIPIC_REG_OFFSET; - } else { - mipi |= 2; - } - - if (!gma_power_begin(dev, true)) - return; - - /* Set up mipi port FIXME: do at init time */ - REG_WRITE(mipi_reg, mipi); - REG_READ(mipi_reg); - - /* Set up DSI controller DPI interface */ - mdfld_dsi_dpi_controller_init(dsi_config, pipe); - - if (mdfld_get_panel_type(dev, pipe) != TMD_VID) { - /* Turn on DPI interface */ - mdfld_dsi_dpi_turn_on(dpi_output, pipe); - } - - /* Set up pipe */ - REG_WRITE(pipeconf_reg, pipeconf); - REG_READ(pipeconf_reg); - - /* Set up display plane */ - REG_WRITE(dspcntr_reg, dspcntr); - REG_READ(dspcntr_reg); - - msleep(20); /* FIXME: this should wait for vblank */ - - dev_dbg(dev->dev, "State %x, power %d\n", - REG_READ(MIPIA_INTR_STAT_REG + reg_offset), - dpi_output->panel_on); - - if (mdfld_get_panel_type(dev, pipe) != TMD_VID) { - /* Init driver ic */ - mdfld_dsi_tpo_ic_init(dsi_config, pipe); - /* Init backlight */ - mdfld_dsi_brightness_init(dsi_config, pipe); - } - gma_power_end(dev); -} - - -/* - * Init DSI DPI encoder. - * Allocate an mdfld_dsi_encoder and attach it to given @dsi_connector - * return pointer of newly allocated DPI encoder, NULL on error - */ -struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev, - struct mdfld_dsi_connector *dsi_connector, - struct panel_funcs *p_funcs) -{ - struct mdfld_dsi_dpi_output *dpi_output = NULL; - struct mdfld_dsi_config *dsi_config; - struct drm_connector *connector = NULL; - struct drm_encoder *encoder = NULL; - struct drm_display_mode *fixed_mode = NULL; - int pipe; - u32 data; - int ret; - - if (!dsi_connector || !p_funcs) { - WARN_ON(1); - return NULL; - } - - dsi_config = mdfld_dsi_get_config(dsi_connector); - pipe = dsi_connector->pipe; - - /* Panel hard-reset */ - if (p_funcs->reset) { - ret = p_funcs->reset(pipe); - if (ret) { - DRM_ERROR("Panel %d hard-reset failed\n", pipe); - return NULL; - } - } - - /* Panel drvIC init */ - if (p_funcs->drv_ic_init) - p_funcs->drv_ic_init(dsi_config, pipe); - - /* Panel power mode detect */ - ret = mdfld_dsi_get_power_mode(dsi_config, - &data, - MDFLD_DSI_LP_TRANSMISSION); - if (ret) { - DRM_ERROR("Panel %d get power mode failed\n", pipe); - dsi_connector->status = connector_status_disconnected; - } else { - DRM_INFO("pipe %d power mode 0x%x\n", pipe, data); - dsi_connector->status = connector_status_connected; - } - - dpi_output = kzalloc(sizeof(struct mdfld_dsi_dpi_output), GFP_KERNEL); - if(!dpi_output) { - dev_err(dev->dev, "No memory for dsi_dpi_output\n"); - return NULL; - } - - if(dsi_connector->pipe) - dpi_output->panel_on = 0; - else - dpi_output->panel_on = 0; - - dpi_output->dev = dev; - dpi_output->p_funcs = p_funcs; - dpi_output->first_boot = 1; - - /* Get fixed mode */ - dsi_config = mdfld_dsi_get_config(dsi_connector); - fixed_mode = dsi_config->fixed_mode; - - /* Create drm encoder object */ - connector = &dsi_connector->base.base; - encoder = &dpi_output->base.base; - /* - * On existing hardware this will be a panel of some form, - * if future devices also have HDMI bridges this will need - * revisiting - */ - drm_encoder_init(dev, - encoder, - p_funcs->encoder_funcs, - DRM_MODE_ENCODER_LVDS); - drm_encoder_helper_add(encoder, - p_funcs->encoder_helper_funcs); - - /* Attach to given connector */ - drm_mode_connector_attach_encoder(connector, encoder); - - /* Set possible crtcs and clones */ - if(dsi_connector->pipe) { - encoder->possible_crtcs = (1 << 2); - encoder->possible_clones = (1 << 1); - } else { - encoder->possible_crtcs = (1 << 0); - encoder->possible_clones = (1 << 0); - } - return &dpi_output->base; -} - diff --git a/drivers/staging/gma500/mdfld_dsi_dpi.h b/drivers/staging/gma500/mdfld_dsi_dpi.h deleted file mode 100644 index ed92d45ee74a..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_dpi.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * Jackie Li - */ - -#ifndef __MDFLD_DSI_DPI_H__ -#define __MDFLD_DSI_DPI_H__ - -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" - -struct mdfld_dsi_dpi_timing { - u16 hsync_count; - u16 hbp_count; - u16 hfp_count; - u16 hactive_count; - u16 vsync_count; - u16 vbp_count; - u16 vfp_count; -}; - -struct mdfld_dsi_dpi_output { - struct mdfld_dsi_encoder base; - struct drm_device *dev; - - int panel_on; - int first_boot; - - struct panel_funcs *p_funcs; -}; - -#define MDFLD_DSI_DPI_OUTPUT(dsi_encoder) \ - container_of(dsi_encoder, struct mdfld_dsi_dpi_output, base) - -extern int mdfld_dsi_dpi_timing_calculation(struct drm_display_mode *mode, - struct mdfld_dsi_dpi_timing *dpi_timing, - int num_lane, int bpp); -extern struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev, - struct mdfld_dsi_connector *dsi_connector, - struct panel_funcs *p_funcs); - -/* Medfield DPI helper functions */ -extern void mdfld_dsi_dpi_dpms(struct drm_encoder *encoder, int mode); -extern bool mdfld_dsi_dpi_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode); -extern void mdfld_dsi_dpi_prepare(struct drm_encoder *encoder); -extern void mdfld_dsi_dpi_commit(struct drm_encoder *encoder); -extern void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode); -extern void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output, - int pipe); -extern void mdfld_dsi_dpi_controller_init(struct mdfld_dsi_config *si_config, - int pipe); -#endif /*__MDFLD_DSI_DPI_H__*/ diff --git a/drivers/staging/gma500/mdfld_dsi_output.c b/drivers/staging/gma500/mdfld_dsi_output.c deleted file mode 100644 index 3f979db2c3a5..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_output.c +++ /dev/null @@ -1,1014 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * Jackie Li - */ - -#include "mdfld_dsi_output.h" -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" -#include "mdfld_output.h" -#include -#include "mdfld_dsi_pkg_sender.h" -#include -#include - -#define MDFLD_DSI_BRIGHTNESS_MAX_LEVEL 100 - -static int CABC_control = 1; -static int LABC_control = 1; - -module_param (CABC_control, int, 0644); -module_param (LABC_control, int, 0644); - -/** - * make these MCS command global - * we don't need 'movl' everytime we send them. - * FIXME: these datas were provided by OEM, we should get them from GCT. - **/ -static u32 mdfld_dbi_mcs_hysteresis[] = { - 0x42000f57, 0x8c006400, 0xff00bf00, 0xffffffff, - 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, - 0x38000aff, 0x82005000, 0xff00ab00, 0xffffffff, - 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, - 0x000000ff, -}; - -static u32 mdfld_dbi_mcs_display_profile[] = { - 0x50281450, 0x0000c882, 0x00000000, 0x00000000, - 0x00000000, -}; - -static u32 mdfld_dbi_mcs_kbbc_profile[] = { - 0x00ffcc60, 0x00000000, 0x00000000, 0x00000000, -}; - -static u32 mdfld_dbi_mcs_gamma_profile[] = { - 0x81111158, 0x88888888, 0x88888888, -}; - -/* - * write hysteresis values. - */ -static void mdfld_dsi_write_hysteresis (struct mdfld_dsi_config *dsi_config, - int pipe) -{ - struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); - - if(!sender) { - WARN_ON(1); - return; - } - mdfld_dsi_send_mcs_long_hs(sender, - mdfld_dbi_mcs_hysteresis, - 17, - MDFLD_DSI_SEND_PACKAGE); -} - -/* - * write display profile values. - */ -static void mdfld_dsi_write_display_profile(struct mdfld_dsi_config *dsi_config, int pipe) -{ - struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); - - if(!sender) { - WARN_ON(1); - return; - } - mdfld_dsi_send_mcs_long_hs(sender, - mdfld_dbi_mcs_display_profile, - 5, - MDFLD_DSI_SEND_PACKAGE); -} - -/* - * write KBBC profile values. - */ -static void mdfld_dsi_write_kbbc_profile (struct mdfld_dsi_config * dsi_config, int pipe) -{ - struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); - - if(!sender) { - WARN_ON(1); - return; - } - mdfld_dsi_send_mcs_long_hs(sender, - mdfld_dbi_mcs_kbbc_profile, - 4, - MDFLD_DSI_SEND_PACKAGE); -} - -/* - * write gamma setting. - */ -static void mdfld_dsi_write_gamma_setting (struct mdfld_dsi_config *dsi_config, int pipe) -{ - struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); - - if(!sender) { - WARN_ON(1); - return; - } - mdfld_dsi_send_mcs_long_hs(sender, - mdfld_dbi_mcs_gamma_profile, - 3, - MDFLD_DSI_SEND_PACKAGE); -} - -/* - * Check and see if the generic control or data buffer is empty and ready. - */ -void mdfld_dsi_gen_fifo_ready (struct drm_device *dev, u32 gen_fifo_stat_reg, u32 fifo_stat) -{ - u32 GEN_BF_time_out_count = 0; - - /* Check MIPI Adatper command registers */ - for (GEN_BF_time_out_count = 0; GEN_BF_time_out_count < GEN_FB_TIME_OUT; GEN_BF_time_out_count++) - { - if ((REG_READ(gen_fifo_stat_reg) & fifo_stat) == fifo_stat) - break; - udelay (100); - } - - if (GEN_BF_time_out_count == GEN_FB_TIME_OUT) - dev_err(dev->dev, - "mdfld_dsi_gen_fifo_ready, Timeout. gen_fifo_stat_reg = 0x%x. \n", - gen_fifo_stat_reg); -} - -/* - * Manage the DSI MIPI keyboard and display brightness. - * FIXME: this is exported to OSPM code. should work out an specific - * display interface to OSPM. - */ -void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config, int pipe) -{ - struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); - struct drm_device *dev = sender->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 gen_ctrl_val; - - if(!sender) { - WARN_ON(1); - return; - } - /* Set default display backlight value to 85% (0xd8)*/ - mdfld_dsi_send_mcs_short_hs(sender, - write_display_brightness, - 0xd8, - 1, - MDFLD_DSI_SEND_PACKAGE); - - /* Set minimum brightness setting of CABC function to 20% (0x33)*/ - mdfld_dsi_send_mcs_short_hs(sender, - write_cabc_min_bright, - 0x33, - 1, - MDFLD_DSI_SEND_PACKAGE); - - mdfld_dsi_write_hysteresis(dsi_config, pipe); - mdfld_dsi_write_display_profile (dsi_config, pipe); - mdfld_dsi_write_kbbc_profile (dsi_config, pipe); - mdfld_dsi_write_gamma_setting (dsi_config, pipe); - - /* Enable backlight or/and LABC */ - gen_ctrl_val = BRIGHT_CNTL_BLOCK_ON | DISPLAY_DIMMING_ON| BACKLIGHT_ON; - if (LABC_control == 1 || CABC_control == 1) - gen_ctrl_val |= DISPLAY_DIMMING_ON| DISPLAY_BRIGHTNESS_AUTO | GAMMA_AUTO; - - if (LABC_control == 1) - gen_ctrl_val |= AMBIENT_LIGHT_SENSE_ON; - - dev_priv->mipi_ctrl_display = gen_ctrl_val; - - mdfld_dsi_send_mcs_short_hs(sender, - write_ctrl_display, - (u8)gen_ctrl_val, - 1, - MDFLD_DSI_SEND_PACKAGE); - - if (CABC_control == 0) - return; - mdfld_dsi_send_mcs_short_hs(sender, - write_ctrl_cabc, - UI_IMAGE, - 1, - MDFLD_DSI_SEND_PACKAGE); -} - -/* - * Manage the mipi display brightness. - * TODO: refine this interface later - */ -void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level) -{ - struct mdfld_dsi_pkg_sender *sender; - struct drm_psb_private *dev_priv; - struct mdfld_dsi_config *dsi_config; - u32 gen_ctrl_val; - int p_type; - - if (!dev || (pipe != 0 && pipe != 2)) { - dev_err(dev->dev, "Invalid parameter\n"); - return; - } - - p_type = mdfld_get_panel_type(dev, 0); - - dev_priv = dev->dev_private; - - if(pipe) - dsi_config = dev_priv->dsi_configs[1]; - else - dsi_config = dev_priv->dsi_configs[0]; - - sender = mdfld_dsi_get_pkg_sender(dsi_config); - - if(!sender) { - WARN_ON(1); - return; - } - - gen_ctrl_val = ((level * 0xff) / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL) & 0xff; - - dev_dbg(dev->dev, - "pipe = %d, gen_ctrl_val = %d. \n", pipe, gen_ctrl_val); - - if(p_type == TMD_VID || p_type == TMD_CMD){ - /* Set display backlight value */ - mdfld_dsi_send_mcs_short_hs(sender, - tmd_write_display_brightness, - (u8)gen_ctrl_val, - 1, - MDFLD_DSI_SEND_PACKAGE); - } else { - /* Set display backlight value */ - mdfld_dsi_send_mcs_short_hs(sender, - write_display_brightness, - (u8)gen_ctrl_val, - 1, - MDFLD_DSI_SEND_PACKAGE); - - - /* Enable backlight control */ - if (level == 0) - gen_ctrl_val = 0; - else - gen_ctrl_val = dev_priv->mipi_ctrl_display; - - mdfld_dsi_send_mcs_short_hs(sender, - write_ctrl_display, - (u8)gen_ctrl_val, - 1, - MDFLD_DSI_SEND_PACKAGE); - } -} - -/* - * shut down DSI controller - */ -void mdfld_dsi_controller_shutdown(struct mdfld_dsi_config * dsi_config, int pipe) -{ - struct drm_device * dev; - u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - int retry = 100; - - if (!dsi_config) { - WARN_ON(1); - return; - } - - dev = dsi_config->dev; - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - if(!(REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) & DSI_DEVICE_READY)) - goto shutdown_out; - - /* Send shut down package, clean packet send bit first */ - if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) { - REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), - (REG_READ(MIPIA_INTR_STAT_REG + reg_offset) | DSI_INTR_STATE_SPL_PKG_SENT)); - } - - /*send shut down package in HS*/ - REG_WRITE((MIPIA_DPI_CONTROL_REG + reg_offset), DSI_DPI_CTRL_HS_SHUTDOWN); - - - /* - * make sure shut down is sent. - * FIXME: add max retry counter - */ - while(!(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT)) { - retry--; - - if(!retry) { - dev_err(dev->dev, "timeout\n"); - break; - } - } - - /*sleep 1 ms to ensure shutdown finished*/ - msleep(100); - - /*un-ready device*/ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), - (REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) & ~DSI_DEVICE_READY)); - -shutdown_out: - gma_power_end(dev); -} - -void mdfld_dsi_controller_startup(struct mdfld_dsi_config * dsi_config, int pipe) -{ - struct drm_device * dev; - u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - int retry = 100; - - - if (!dsi_config) { - WARN_ON(1); - return; - } - - dev = dsi_config->dev; - dev_dbg(dev->dev, "starting up DSI controller on pipe %d...\n", pipe); - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - if((REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) & DSI_DEVICE_READY)) - goto startup_out; - - /*if config DPI, turn on DPI interface*/ - if(dsi_config->type == MDFLD_DSI_ENCODER_DPI) { - if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) { - REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), DSI_INTR_STATE_SPL_PKG_SENT); - } - - REG_WRITE((MIPIA_DPI_CONTROL_REG + reg_offset), DSI_DPI_CTRL_HS_TURN_ON); - - /* - * make sure shut down is sent. - * FIXME: add max retry counter - */ - while(!(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT)) { - retry--; - if(!retry) { - dev_err(dev->dev, "timeout\n"); - break; - } - } - - msleep(100); - } - - /*set device ready*/ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), - (REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) | DSI_DEVICE_READY)); - -startup_out: - gma_power_end(dev); -} - - -static int mdfld_dsi_get_panel_status(struct mdfld_dsi_config *dsi_config, - u8 dcs, - u32 *data, - u8 transmission) -{ - struct mdfld_dsi_pkg_sender *sender - = mdfld_dsi_get_pkg_sender(dsi_config); - - if (!sender || !data) { - DRM_ERROR("Invalid parameter\n"); - return -EINVAL; - } - - if (transmission == MDFLD_DSI_HS_TRANSMISSION) - return mdfld_dsi_read_mcs_hs(sender, dcs, data, 1); - else if (transmission == MDFLD_DSI_LP_TRANSMISSION) - return mdfld_dsi_read_mcs_lp(sender, dcs, data, 1); - else - return -EINVAL; -} - -int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config, - u32 *mode, - u8 transmission) -{ - if (!dsi_config || !mode) { - DRM_ERROR("Invalid parameter\n"); - return -EINVAL; - } - - return mdfld_dsi_get_panel_status(dsi_config, 0x0a, mode, transmission); -} - -int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config, - u32 *result, - u8 transmission) -{ - if (!dsi_config || !result) { - DRM_ERROR("Invalid parameter\n"); - return -EINVAL; - } - - return mdfld_dsi_get_panel_status(dsi_config, 0x0f, result, - transmission); -} - -/* - * NOTE: this function was used by OSPM. - * TODO: will be removed later, should work out display interfaces for OSPM - */ -void mdfld_dsi_controller_init(struct mdfld_dsi_config * dsi_config, int pipe) -{ - if(!dsi_config || ((pipe != 0) && (pipe != 2))) { - WARN_ON(1); - return; - } - - if(dsi_config->type) - mdfld_dsi_dpi_controller_init(dsi_config, pipe); - else - mdfld_dsi_controller_dbi_init(dsi_config, pipe); -} - -static void mdfld_dsi_connector_save(struct drm_connector * connector) -{ -} - -static void mdfld_dsi_connector_restore(struct drm_connector * connector) -{ -} - -static enum drm_connector_status mdfld_dsi_connector_detect(struct drm_connector * connector, bool force) -{ - struct psb_intel_output *psb_output - = to_psb_intel_output(connector); - struct mdfld_dsi_connector *dsi_connector - = MDFLD_DSI_CONNECTOR(psb_output); - return dsi_connector->status; -} - -static int mdfld_dsi_connector_set_property(struct drm_connector *connector, - struct drm_property *property, - uint64_t value) -{ - struct drm_encoder *encoder = connector->encoder; - - if (!strcmp(property->name, "scaling mode") && encoder) { - struct psb_intel_crtc * psb_crtc = to_psb_intel_crtc(encoder->crtc); - bool bTransitionFromToCentered; - uint64_t curValue; - - if (!psb_crtc) - goto set_prop_error; - - switch (value) { - case DRM_MODE_SCALE_FULLSCREEN: - break; - case DRM_MODE_SCALE_NO_SCALE: - break; - case DRM_MODE_SCALE_ASPECT: - break; - default: - goto set_prop_error; - } - - if (drm_connector_property_get_value(connector, property, &curValue)) - goto set_prop_error; - - if (curValue == value) - goto set_prop_done; - - if (drm_connector_property_set_value(connector, property, value)) - goto set_prop_error; - - bTransitionFromToCentered = (curValue == DRM_MODE_SCALE_NO_SCALE) || - (value == DRM_MODE_SCALE_NO_SCALE); - - if (psb_crtc->saved_mode.hdisplay != 0 && - psb_crtc->saved_mode.vdisplay != 0) { - if (bTransitionFromToCentered) { - if (!drm_crtc_helper_set_mode(encoder->crtc, &psb_crtc->saved_mode, - encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb)) - goto set_prop_error; - } else { - struct drm_encoder_helper_funcs *pEncHFuncs = encoder->helper_private; - pEncHFuncs->mode_set(encoder, &psb_crtc->saved_mode, - &psb_crtc->saved_adjusted_mode); - } - } -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - } else if (!strcmp(property->name, "backlight") && encoder) { - struct drm_psb_private *dev_priv = encoder->dev->dev_private; - struct backlight_device *psb_bd = dev_priv->backlight_device; - dev_dbg(encoder->dev->dev, "backlight level = %d\n", (int)value); - if (drm_connector_property_set_value(connector, property, value)) - goto set_prop_error; - else { - dev_dbg(encoder->dev->dev, - "set brightness to %d", (int)value); - if (psb_bd) { - psb_bd->props.brightness = value; - backlight_update_status(psb_bd); - } - } -#endif - } -set_prop_done: - return 0; -set_prop_error: - return -1; -} - -static void mdfld_dsi_connector_destroy(struct drm_connector *connector) -{ - struct psb_intel_output * psb_output = to_psb_intel_output(connector); - struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output); - struct mdfld_dsi_pkg_sender * sender; - - if(!dsi_connector) - return; - - drm_sysfs_connector_remove(connector); - drm_connector_cleanup(connector); - - sender = dsi_connector->pkg_sender; - - mdfld_dsi_pkg_sender_destroy(sender); - - kfree(dsi_connector); -} - -static int mdfld_dsi_connector_get_modes(struct drm_connector * connector) -{ - struct psb_intel_output * psb_output = to_psb_intel_output(connector); - struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output); - struct mdfld_dsi_config * dsi_config = mdfld_dsi_get_config(dsi_connector); - struct drm_display_mode * fixed_mode = dsi_config->fixed_mode; - struct drm_display_mode * dup_mode = NULL; - struct drm_device * dev = connector->dev; - - connector->display_info.min_vfreq = 0; - connector->display_info.max_vfreq = 200; - connector->display_info.min_hfreq = 0; - connector->display_info.max_hfreq = 200; - - if(fixed_mode) { - dev_dbg(dev->dev, "fixed_mode %dx%d\n", - fixed_mode->hdisplay, fixed_mode->vdisplay); - - dup_mode = drm_mode_duplicate(dev, fixed_mode); - drm_mode_probed_add(connector, dup_mode); - return 1; - } - dev_err(dev->dev, "Didn't get any modes!\n"); - return 0; -} - -static int mdfld_dsi_connector_mode_valid(struct drm_connector * connector, struct drm_display_mode * mode) -{ - struct psb_intel_output * psb_output = to_psb_intel_output(connector); - struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output); - struct mdfld_dsi_config * dsi_config = mdfld_dsi_get_config(dsi_connector); - struct drm_display_mode * fixed_mode = dsi_config->fixed_mode; - - dev_dbg(connector->dev->dev, "mode %p, fixed mode %p\n", - mode, fixed_mode); - - if(mode->flags & DRM_MODE_FLAG_DBLSCAN) - return MODE_NO_DBLESCAN; - - if(mode->flags & DRM_MODE_FLAG_INTERLACE) - return MODE_NO_INTERLACE; - - /** - * FIXME: current DC has no fitting unit, reject any mode setting request - * will figure out a way to do up-scaling(pannel fitting) later. - **/ - if(fixed_mode) { - if(mode->hdisplay != fixed_mode->hdisplay) - return MODE_PANEL; - - if(mode->vdisplay != fixed_mode->vdisplay) - return MODE_PANEL; - } - dev_dbg(connector->dev->dev, "mode ok\n"); - - return MODE_OK; -} - -static void mdfld_dsi_connector_dpms(struct drm_connector *connector, int mode) -{ -#ifdef CONFIG_PM_RUNTIME - struct drm_device * dev = connector->dev; - struct drm_psb_private * dev_priv = dev->dev_private; - bool panel_on, panel_on2; -#endif - /* First, execute DPMS */ - drm_helper_connector_dpms(connector, mode); - -#ifdef CONFIG_PM_RUNTIME - if(mdfld_panel_dpi(dev)) { - /* DPI panel */ - panel_on = dev_priv->dpi_panel_on; - panel_on2 = dev_priv->dpi_panel_on2; - } else { - /* DBI panel */ - panel_on = dev_priv->dbi_panel_on; - panel_on2 = dev_priv->dbi_panel_on2; - } - - /* Then check all display panels + monitors status */ - /* Make sure that the Display (B) sub-system status isn't i3 when - * R/W the DC register, otherwise "Fabric error" issue would occur - * during S0i3 state. */ - if(!panel_on && !panel_on2 && !(REG_READ(HDMIB_CONTROL) - & HDMIB_PORT_EN)) { - /* Request rpm idle */ - if(dev_priv->rpm_enabled) - pm_request_idle(&dev->pdev->dev); - } - /* - * if rpm wasn't enabled yet, try to allow it - * FIXME: won't enable rpm for DPI since DPI - * CRTC setting is a little messy now. - * Enable it later! - */ -#if 0 - if(!dev_priv->rpm_enabled && !mdfld_panel_dpi(dev)) - ospm_runtime_pm_allow(dev); -#endif -#endif -} - -static struct drm_encoder *mdfld_dsi_connector_best_encoder( - struct drm_connector *connector) -{ - struct psb_intel_output * psb_output = to_psb_intel_output(connector); - struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output); - struct mdfld_dsi_config * dsi_config = mdfld_dsi_get_config(dsi_connector); - struct mdfld_dsi_encoder * encoder = NULL; - - if(dsi_config->type == MDFLD_DSI_ENCODER_DBI) - encoder = dsi_config->encoders[MDFLD_DSI_ENCODER_DBI]; - else if (dsi_config->type == MDFLD_DSI_ENCODER_DPI) - encoder = dsi_config->encoders[MDFLD_DSI_ENCODER_DPI]; - - dev_dbg(connector->dev->dev, "get encoder %p\n", encoder); - - if(!encoder) { - dev_err(connector->dev->dev, - "Invalid encoder for type %d\n", dsi_config->type); - return NULL; - } - dsi_config->encoder = encoder; - return &encoder->base; -} - -/* DSI connector funcs */ -static const struct drm_connector_funcs mdfld_dsi_connector_funcs = { - .dpms = /*drm_helper_connector_dpms*/mdfld_dsi_connector_dpms, - .save = mdfld_dsi_connector_save, - .restore = mdfld_dsi_connector_restore, - .detect = mdfld_dsi_connector_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .set_property = mdfld_dsi_connector_set_property, - .destroy = mdfld_dsi_connector_destroy, -}; - -/* DSI connector helper funcs */ -static const struct drm_connector_helper_funcs mdfld_dsi_connector_helper_funcs = { - .get_modes = mdfld_dsi_connector_get_modes, - .mode_valid = mdfld_dsi_connector_mode_valid, - .best_encoder = mdfld_dsi_connector_best_encoder, -}; - -static int mdfld_dsi_get_default_config(struct drm_device * dev, - struct mdfld_dsi_config * config, int pipe) -{ - if(!dev || !config) { - WARN_ON(1); - return -EINVAL; - } - - config->bpp = 24; - config->type = mdfld_panel_dpi(dev); - config->lane_count = 2; - config->channel_num = 0; - /*NOTE: video mode is ignored when type is MDFLD_DSI_ENCODER_DBI*/ - if (mdfld_get_panel_type(dev, pipe) == TMD_VID) { - config->video_mode = MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE; - } else { - config->video_mode = MDFLD_DSI_VIDEO_BURST_MODE; - } - - return 0; -} - -/* - * Returns the panel fixed mode from configuration. - */ -struct drm_display_mode * -mdfld_dsi_get_configuration_mode(struct mdfld_dsi_config * dsi_config, int pipe) -{ - struct drm_device *dev = dsi_config->dev; - struct drm_display_mode *mode; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_timing_info *ti = &dev_priv->gct_data.DTD; - bool use_gct = false; - - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) { - dev_err(dev->dev, "Out of memory for mode\n"); - return NULL; - } - if (use_gct) { - dev_dbg(dev->dev, "gct find MIPI panel.\n"); - - mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; - mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; - mode->hsync_start = mode->hdisplay + \ - ((ti->hsync_offset_hi << 8) | \ - ti->hsync_offset_lo); - mode->hsync_end = mode->hsync_start + \ - ((ti->hsync_pulse_width_hi << 8) | \ - ti->hsync_pulse_width_lo); - mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ - ti->hblank_lo); - mode->vsync_start = \ - mode->vdisplay + ((ti->vsync_offset_hi << 8) | \ - ti->vsync_offset_lo); - mode->vsync_end = \ - mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \ - ti->vsync_pulse_width_lo); - mode->vtotal = mode->vdisplay + \ - ((ti->vblank_hi << 8) | ti->vblank_lo); - mode->clock = ti->pixel_clock * 10; - } else { - if(dsi_config->type == MDFLD_DSI_ENCODER_DPI) { - if (mdfld_get_panel_type(dev, pipe) == TMD_VID) { - mode->hdisplay = 480; - mode->vdisplay = 854; - mode->hsync_start = 487; - mode->hsync_end = 490; - mode->htotal = 499; - mode->vsync_start = 861; - mode->vsync_end = 865; - mode->vtotal = 873; - mode->clock = 33264; - } else { - mode->hdisplay = 864; - mode->vdisplay = 480; - mode->hsync_start = 873; - mode->hsync_end = 876; - mode->htotal = 887; - mode->vsync_start = 487; - mode->vsync_end = 490; - mode->vtotal = 499; - mode->clock = 33264; - } - } else if(dsi_config->type == MDFLD_DSI_ENCODER_DBI) { - mode->hdisplay = 864; - mode->vdisplay = 480; - mode->hsync_start = 872; - mode->hsync_end = 876; - mode->htotal = 884; - mode->vsync_start = 482; - mode->vsync_end = 494; - mode->vtotal = 486; - mode->clock = 25777; - - } - } - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - mode->type |= DRM_MODE_TYPE_PREFERRED; - - return mode; -} - -int mdfld_dsi_panel_reset(int pipe) -{ - unsigned gpio; - int ret = 0; - - switch (pipe) { - case 0: - gpio = 128; - break; - case 2: - gpio = 34; - break; - default: - DRM_ERROR("Invalid output\n"); - return -EINVAL; - } - - ret = gpio_request(gpio, "gfx"); - if (ret) { - DRM_ERROR("gpio_rqueset failed\n"); - return ret; - } - - ret = gpio_direction_output(gpio, 1); - if (ret) { - DRM_ERROR("gpio_direction_output failed\n"); - goto gpio_error; - } - - gpio_get_value(128); - -gpio_error: - if (gpio_is_valid(gpio)) - gpio_free(gpio); - - return ret; -} - -/* - * MIPI output init - * @dev drm device - * @pipe pipe number. 0 or 2 - * @config - * - * Do the initialization of a MIPI output, including create DRM mode objects - * initialization of DSI output on @pipe - */ -void mdfld_dsi_output_init(struct drm_device *dev, - int pipe, - struct mdfld_dsi_config *config, - struct panel_funcs* p_cmd_funcs, - struct panel_funcs* p_vid_funcs) -{ - struct mdfld_dsi_config * dsi_config; - struct mdfld_dsi_connector * dsi_connector; - struct psb_intel_output * psb_output; - struct drm_connector * connector; - struct mdfld_dsi_encoder * encoder; - struct drm_psb_private * dev_priv = dev->dev_private; - struct panel_info dsi_panel_info; - u32 width_mm, height_mm; - - dev_dbg(dev->dev, "init DSI output on pipe %d\n", pipe); - - if(!dev || ((pipe != 0) && (pipe != 2))) { - WARN_ON(1); - return; - } - - /*create a new connetor*/ - dsi_connector = kzalloc(sizeof(struct mdfld_dsi_connector), GFP_KERNEL); - if(!dsi_connector) { - DRM_ERROR("No memory"); - return; - } - - dsi_connector->pipe = pipe; - - /*set DSI config*/ - if(config) { - dsi_config = config; - } else { - dsi_config = kzalloc(sizeof(struct mdfld_dsi_config), GFP_KERNEL); - if(!dsi_config) { - dev_err(dev->dev, - "cannot allocate memory for DSI config\n"); - goto dsi_init_err0; - } - - mdfld_dsi_get_default_config(dev, dsi_config, pipe); - } - - dsi_connector->private = dsi_config; - - dsi_config->changed = 1; - dsi_config->dev = dev; - - /* Init fixed mode basing on DSI config type */ - if(dsi_config->type == MDFLD_DSI_ENCODER_DBI) { - dsi_config->fixed_mode = p_cmd_funcs->get_config_mode(dev); - if(p_cmd_funcs->get_panel_info(dev, pipe, &dsi_panel_info)) - goto dsi_init_err0; - } else if(dsi_config->type == MDFLD_DSI_ENCODER_DPI) { - dsi_config->fixed_mode = p_vid_funcs->get_config_mode(dev); - if(p_vid_funcs->get_panel_info(dev, pipe, &dsi_panel_info)) - goto dsi_init_err0; - } - - width_mm = dsi_panel_info.width_mm; - height_mm = dsi_panel_info.height_mm; - - dsi_config->mode = dsi_config->fixed_mode; - dsi_config->connector = dsi_connector; - - if(!dsi_config->fixed_mode) { - dev_err(dev->dev, "No pannel fixed mode was found\n"); - goto dsi_init_err0; - } - - if(pipe && dev_priv->dsi_configs[0]) { - dsi_config->dvr_ic_inited = 0; - dev_priv->dsi_configs[1] = dsi_config; - } else if(pipe == 0) { - dsi_config->dvr_ic_inited = 1; - dev_priv->dsi_configs[0] = dsi_config; - } else { - dev_err(dev->dev, "Trying to init MIPI1 before MIPI0\n"); - goto dsi_init_err0; - } - - /*init drm connector object*/ - psb_output = &dsi_connector->base; - - psb_output->type = (pipe == 0) ? INTEL_OUTPUT_MIPI : INTEL_OUTPUT_MIPI2; - - connector = &psb_output->base; - /* Revisit type if MIPI/HDMI bridges ever appear on Medfield */ - drm_connector_init(dev, connector, &mdfld_dsi_connector_funcs, - DRM_MODE_CONNECTOR_LVDS); - drm_connector_helper_add(connector, &mdfld_dsi_connector_helper_funcs); - - connector->display_info.subpixel_order = SubPixelHorizontalRGB; - connector->display_info.width_mm = width_mm; - connector->display_info.height_mm = height_mm; - connector->interlace_allowed = false; - connector->doublescan_allowed = false; - - /* Attach properties */ - drm_connector_attach_property(connector, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN); - drm_connector_attach_property(connector, dev_priv->backlight_property, MDFLD_DSI_BRIGHTNESS_MAX_LEVEL); - - /* Init DSI package sender on this output */ - if (mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) { - DRM_ERROR("Package Sender initialization failed on pipe %d\n", pipe); - goto dsi_init_err0; - } - - /* Init DBI & DPI encoders */ - if (p_cmd_funcs) { - encoder = mdfld_dsi_dbi_init(dev, dsi_connector, p_cmd_funcs); - if(!encoder) { - dev_err(dev->dev, "Create DBI encoder failed\n"); - goto dsi_init_err1; - } - encoder->private = dsi_config; - dsi_config->encoders[MDFLD_DSI_ENCODER_DBI] = encoder; - } - - if(p_vid_funcs) { - encoder = mdfld_dsi_dpi_init(dev, dsi_connector, p_vid_funcs); - if(!encoder) { - dev_err(dev->dev, "Create DPI encoder failed\n"); - goto dsi_init_err1; - } - encoder->private = dsi_config; - dsi_config->encoders[MDFLD_DSI_ENCODER_DPI] = encoder; - } - - drm_sysfs_connector_add(connector); - return; - - /*TODO: add code to destroy outputs on error*/ -dsi_init_err1: - /*destroy sender*/ - mdfld_dsi_pkg_sender_destroy(dsi_connector->pkg_sender); - - drm_connector_cleanup(connector); - kfree(dsi_config->fixed_mode); - kfree(dsi_config); -dsi_init_err0: - kfree(dsi_connector); -} diff --git a/drivers/staging/gma500/mdfld_dsi_output.h b/drivers/staging/gma500/mdfld_dsi_output.h deleted file mode 100644 index 4699267efd60..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_output.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * Jackie Li - */ - -#ifndef __MDFLD_DSI_OUTPUT_H__ -#define __MDFLD_DSI_OUTPUT_H__ - -#include -#include -#include -#include -#include - -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "power.h" -#include "mdfld_output.h" - -#include - - -static inline struct mdfld_dsi_config * - mdfld_dsi_get_config(struct mdfld_dsi_connector *connector) -{ - if (!connector) - return NULL; - return (struct mdfld_dsi_config *)connector->private; -} - -static inline void *mdfld_dsi_get_pkg_sender(struct mdfld_dsi_config *config) -{ - struct mdfld_dsi_connector *dsi_connector; - - if (!config) - return NULL; - - dsi_connector = config->connector; - - if (!dsi_connector) - return NULL; - - return dsi_connector->pkg_sender; -} - -static inline struct mdfld_dsi_config * - mdfld_dsi_encoder_get_config(struct mdfld_dsi_encoder *encoder) -{ - if (!encoder) - return NULL; - return (struct mdfld_dsi_config *)encoder->private; -} - -static inline struct mdfld_dsi_connector * - mdfld_dsi_encoder_get_connector(struct mdfld_dsi_encoder *encoder) -{ - struct mdfld_dsi_config *config; - - if (!encoder) - return NULL; - - config = mdfld_dsi_encoder_get_config(encoder); - if (!config) - return NULL; - - return config->connector; -} - -static inline void *mdfld_dsi_encoder_get_pkg_sender( - struct mdfld_dsi_encoder *encoder) -{ - struct mdfld_dsi_config *dsi_config; - - dsi_config = mdfld_dsi_encoder_get_config(encoder); - if (!dsi_config) - return NULL; - - return mdfld_dsi_get_pkg_sender(dsi_config); -} - -static inline int mdfld_dsi_encoder_get_pipe(struct mdfld_dsi_encoder *encoder) -{ - struct mdfld_dsi_connector *connector; - - if (!encoder) - return -1; - - connector = mdfld_dsi_encoder_get_connector(encoder); - if (!connector) - return -1; - - return connector->pipe; -} - -extern void mdfld_dsi_gen_fifo_ready(struct drm_device *dev, - u32 gen_fifo_stat_reg, u32 fifo_stat); -extern void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config, - int pipe); -extern void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, - int level); -extern void mdfld_dsi_output_init(struct drm_device *dev, int pipe, - struct mdfld_dsi_config *config, - struct panel_funcs *p_cmd_funcs, - struct panel_funcs *p_vid_funcs); -extern void mdfld_dsi_controller_init(struct mdfld_dsi_config *dsi_config, - int pipe); -extern int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config, - u32 *mode, - u8 transmission); -extern int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config, - u32 *result, - u8 transmission); -extern int mdfld_dsi_panel_reset(int pipe); - -#endif /*__MDFLD_DSI_OUTPUT_H__*/ diff --git a/drivers/staging/gma500/mdfld_dsi_pkg_sender.c b/drivers/staging/gma500/mdfld_dsi_pkg_sender.c deleted file mode 100644 index 9b96a5c9abcd..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_pkg_sender.c +++ /dev/null @@ -1,1484 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Jackie Li - */ - -#include - -#include "mdfld_dsi_output.h" -#include "mdfld_dsi_pkg_sender.h" -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" - -#define MDFLD_DSI_DBI_FIFO_TIMEOUT 100 -#define MDFLD_DSI_MAX_RETURN_PACKET_SIZE 512 -#define MDFLD_DSI_READ_MAX_COUNT 5000 - -static const char * const dsi_errors[] = { - "RX SOT Error", - "RX SOT Sync Error", - "RX EOT Sync Error", - "RX Escape Mode Entry Error", - "RX LP TX Sync Error", - "RX HS Receive Timeout Error", - "RX False Control Error", - "RX ECC Single Bit Error", - "RX ECC Multibit Error", - "RX Checksum Error", - "RX DSI Data Type Not Recognised", - "RX DSI VC ID Invalid", - "TX False Control Error", - "TX ECC Single Bit Error", - "TX ECC Multibit Error", - "TX Checksum Error", - "TX DSI Data Type Not Recognised", - "TX DSI VC ID invalid", - "High Contention", - "Low contention", - "DPI FIFO Under run", - "HS TX Timeout", - "LP RX Timeout", - "Turn Around ACK Timeout", - "ACK With No Error", - "RX Invalid TX Length", - "RX Prot Violation", - "HS Generic Write FIFO Full", - "LP Generic Write FIFO Full", - "Generic Read Data Avail", - "Special Packet Sent", - "Tearing Effect", -}; - -static int wait_for_gen_fifo_empty(struct mdfld_dsi_pkg_sender *sender, - u32 mask) -{ - struct drm_device *dev = sender->dev; - u32 gen_fifo_stat_reg = sender->mipi_gen_fifo_stat_reg; - int retry = 0xffff; - - while (retry--) { - if ((mask & REG_READ(gen_fifo_stat_reg)) == mask) - return 0; - udelay(100); - } - dev_err(dev->dev, "fifo is NOT empty 0x%08x\n", - REG_READ(gen_fifo_stat_reg)); - return -EIO; -} - -static int wait_for_all_fifos_empty(struct mdfld_dsi_pkg_sender *sender) -{ - return wait_for_gen_fifo_empty(sender, (1 << 2) | (1 << 10) | (1 << 18) - | (1 << 26) | (1 << 27) | (1 << 28)); -} - -static int wait_for_lp_fifos_empty(struct mdfld_dsi_pkg_sender *sender) -{ - return wait_for_gen_fifo_empty(sender, (1 << 10) | (1 << 26)); -} - -static int wait_for_hs_fifos_empty(struct mdfld_dsi_pkg_sender *sender) -{ - return wait_for_gen_fifo_empty(sender, (1 << 2) | (1 << 18)); -} - -static int wait_for_dbi_fifo_empty(struct mdfld_dsi_pkg_sender *sender) -{ - return wait_for_gen_fifo_empty(sender, (1 << 27)); -} - -static int handle_dsi_error(struct mdfld_dsi_pkg_sender *sender, u32 mask) -{ - u32 intr_stat_reg = sender->mipi_intr_stat_reg; - struct drm_device *dev = sender->dev; - - switch (mask) { - case (1 << 0): - case (1 << 1): - case (1 << 2): - case (1 << 3): - case (1 << 4): - case (1 << 5): - case (1 << 6): - case (1 << 7): - case (1 << 8): - case (1 << 9): - case (1 << 10): - case (1 << 11): - case (1 << 12): - case (1 << 13): - break; - case (1 << 14): - /*wait for all fifo empty*/ - /*wait_for_all_fifos_empty(sender)*/; - break; - case (1 << 15): - break; - case (1 << 16): - break; - case (1 << 17): - break; - case (1 << 18): - case (1 << 19): - /*wait for contention recovery time*/ - /*mdelay(10);*/ - /*wait for all fifo empty*/ - if (0) - wait_for_all_fifos_empty(sender); - break; - case (1 << 20): - break; - case (1 << 21): - /*wait for all fifo empty*/ - /*wait_for_all_fifos_empty(sender);*/ - break; - case (1 << 22): - break; - case (1 << 23): - case (1 << 24): - case (1 << 25): - case (1 << 26): - case (1 << 27): - /* HS Gen fifo full */ - REG_WRITE(intr_stat_reg, mask); - wait_for_hs_fifos_empty(sender); - break; - case (1 << 28): - /* LP Gen fifo full\n */ - REG_WRITE(intr_stat_reg, mask); - wait_for_lp_fifos_empty(sender); - break; - case (1 << 29): - case (1 << 30): - case (1 << 31): - break; - } - - if (mask & REG_READ(intr_stat_reg)) - dev_warn(dev->dev, "Cannot clean interrupt 0x%08x\n", mask); - - return 0; -} - -static int dsi_error_handler(struct mdfld_dsi_pkg_sender *sender) -{ - struct drm_device *dev = sender->dev; - u32 intr_stat_reg = sender->mipi_intr_stat_reg; - u32 mask; - u32 intr_stat; - int i; - int err = 0; - - intr_stat = REG_READ(intr_stat_reg); - - for (i = 0; i < 32; i++) { - mask = (0x00000001UL) << i; - if (intr_stat & mask) { - dev_dbg(dev->dev, "[DSI]: %s\n", dsi_errors[i]); - err = handle_dsi_error(sender, mask); - if (err) - dev_err(dev->dev, "Cannot handle error\n"); - } - } - return err; -} - -static inline int dbi_cmd_sent(struct mdfld_dsi_pkg_sender *sender) -{ - struct drm_device *dev = sender->dev; - u32 retry = 0xffff; - u32 dbi_cmd_addr_reg = sender->mipi_cmd_addr_reg; - - /* Query the command execution status */ - while (retry--) { - if (!(REG_READ(dbi_cmd_addr_reg) & (1 << 0))) - break; - } - - if (!retry) { - dev_err(dev->dev, "Timeout waiting for DBI Command status\n"); - return -EAGAIN; - } - return 0; -} - -/* - * NOTE: this interface is abandoned expect for write_mem_start DCS - * other DCS are sent via generic pkg interfaces - */ -static int send_dcs_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - struct drm_device *dev = sender->dev; - struct mdfld_dsi_dcs_pkg *dcs_pkg = &pkg->pkg.dcs_pkg; - u32 dbi_cmd_len_reg = sender->mipi_cmd_len_reg; - u32 dbi_cmd_addr_reg = sender->mipi_cmd_addr_reg; - u32 cb_phy = sender->dbi_cb_phy; - u32 index = 0; - u8 *cb = (u8 *)sender->dbi_cb_addr; - int i; - int ret; - - if (!sender->dbi_pkg_support) { - dev_err(dev->dev, "Trying to send DCS on a non DBI output, abort!\n"); - return -ENOTSUPP; - } - - /*wait for DBI fifo empty*/ - wait_for_dbi_fifo_empty(sender); - - *(cb + (index++)) = dcs_pkg->cmd; - if (dcs_pkg->param_num) { - for (i = 0; i < dcs_pkg->param_num; i++) - *(cb + (index++)) = *(dcs_pkg->param + i); - } - - REG_WRITE(dbi_cmd_len_reg, (1 + dcs_pkg->param_num)); - REG_WRITE(dbi_cmd_addr_reg, - (cb_phy << CMD_MEM_ADDR_OFFSET) - | (1 << 0) - | ((dcs_pkg->data_src == CMD_DATA_SRC_PIPE) ? (1 << 1) : 0)); - - ret = dbi_cmd_sent(sender); - if (ret) { - dev_err(dev->dev, "command 0x%x not complete\n", dcs_pkg->cmd); - return -EAGAIN; - } - return 0; -} - -static int __send_short_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - struct drm_device *dev = sender->dev; - u32 hs_gen_ctrl_reg = sender->mipi_hs_gen_ctrl_reg; - u32 lp_gen_ctrl_reg = sender->mipi_lp_gen_ctrl_reg; - u32 gen_ctrl_val = 0; - struct mdfld_dsi_gen_short_pkg *short_pkg = &pkg->pkg.short_pkg; - - gen_ctrl_val |= short_pkg->cmd << MCS_COMMANDS_POS; - gen_ctrl_val |= 0 << DCS_CHANNEL_NUMBER_POS; - gen_ctrl_val |= pkg->pkg_type; - gen_ctrl_val |= short_pkg->param << MCS_PARAMETER_POS; - - if (pkg->transmission_type == MDFLD_DSI_HS_TRANSMISSION) { - /* wait for hs fifo empty */ - /* wait_for_hs_fifos_empty(sender); */ - /* Send pkg */ - REG_WRITE(hs_gen_ctrl_reg, gen_ctrl_val); - } else if (pkg->transmission_type == MDFLD_DSI_LP_TRANSMISSION) { - /* wait_for_lp_fifos_empty(sender); */ - /* Send pkg*/ - REG_WRITE(lp_gen_ctrl_reg, gen_ctrl_val); - } else { - dev_err(dev->dev, "Unknown transmission type %d\n", - pkg->transmission_type); - return -EINVAL; - } - - return 0; -} - -static int __send_long_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - struct drm_device *dev = sender->dev; - u32 hs_gen_ctrl_reg = sender->mipi_hs_gen_ctrl_reg; - u32 hs_gen_data_reg = sender->mipi_hs_gen_data_reg; - u32 lp_gen_ctrl_reg = sender->mipi_lp_gen_ctrl_reg; - u32 lp_gen_data_reg = sender->mipi_lp_gen_data_reg; - u32 gen_ctrl_val = 0; - u32 *dp; - int i; - struct mdfld_dsi_gen_long_pkg *long_pkg = &pkg->pkg.long_pkg; - - dp = long_pkg->data; - - /* - * Set up word count for long pkg - * FIXME: double check word count field. - * currently, using the byte counts of the payload as the word count. - * ------------------------------------------------------------ - * | DI | WC | ECC| PAYLOAD |CHECKSUM| - * ------------------------------------------------------------ - */ - gen_ctrl_val |= (long_pkg->len << 2) << WORD_COUNTS_POS; - gen_ctrl_val |= 0 << DCS_CHANNEL_NUMBER_POS; - gen_ctrl_val |= pkg->pkg_type; - - if (pkg->transmission_type == MDFLD_DSI_HS_TRANSMISSION) { - /* Wait for hs ctrl and data fifos to be empty */ - /* wait_for_hs_fifos_empty(sender); */ - for (i = 0; i < long_pkg->len; i++) - REG_WRITE(hs_gen_data_reg, *(dp + i)); - REG_WRITE(hs_gen_ctrl_reg, gen_ctrl_val); - } else if (pkg->transmission_type == MDFLD_DSI_LP_TRANSMISSION) { - /* wait_for_lp_fifos_empty(sender); */ - for (i = 0; i < long_pkg->len; i++) - REG_WRITE(lp_gen_data_reg, *(dp + i)); - REG_WRITE(lp_gen_ctrl_reg, gen_ctrl_val); - } else { - dev_err(dev->dev, "Unknown transmission type %d\n", - pkg->transmission_type); - return -EINVAL; - } - - return 0; - -} - -static int send_mcs_short_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - return __send_short_pkg(sender, pkg); -} - -static int send_mcs_long_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - return __send_long_pkg(sender, pkg); -} - -static int send_gen_short_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - return __send_short_pkg(sender, pkg); -} - -static int send_gen_long_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - return __send_long_pkg(sender, pkg); -} - -static int send_pkg_prepare(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - u8 cmd; - u8 *data; - - switch (pkg->pkg_type) { - case MDFLD_DSI_PKG_DCS: - cmd = pkg->pkg.dcs_pkg.cmd; - break; - case MDFLD_DSI_PKG_MCS_SHORT_WRITE_0: - case MDFLD_DSI_PKG_MCS_SHORT_WRITE_1: - cmd = pkg->pkg.short_pkg.cmd; - break; - case MDFLD_DSI_PKG_MCS_LONG_WRITE: - data = (u8 *)pkg->pkg.long_pkg.data; - cmd = *data; - break; - default: - return 0; - } - - /* This prevents other package sending while doing msleep */ - sender->status = MDFLD_DSI_PKG_SENDER_BUSY; - - /* Check panel mode v.s. sending command */ - if ((sender->panel_mode & MDFLD_DSI_PANEL_MODE_SLEEP) && - cmd != exit_sleep_mode) { - dev_err(sender->dev->dev, - "sending 0x%x when panel sleep in\n", cmd); - sender->status = MDFLD_DSI_PKG_SENDER_FREE; - return -EINVAL; - } - - /* Wait for 120 milliseconds in case exit_sleep_mode just be sent */ - if (cmd == DCS_ENTER_SLEEP_MODE) { - /*TODO: replace it with msleep later*/ - mdelay(120); - } - return 0; -} - -static int send_pkg_done(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - u8 cmd; - u8 *data; - - switch (pkg->pkg_type) { - case MDFLD_DSI_PKG_DCS: - cmd = pkg->pkg.dcs_pkg.cmd; - break; - case MDFLD_DSI_PKG_MCS_SHORT_WRITE_0: - case MDFLD_DSI_PKG_MCS_SHORT_WRITE_1: - cmd = pkg->pkg.short_pkg.cmd; - break; - case MDFLD_DSI_PKG_MCS_LONG_WRITE: - data = (u8 *)pkg->pkg.long_pkg.data; - cmd = *data; - break; - default: - return 0; - } - - /* Update panel status */ - if (cmd == DCS_ENTER_SLEEP_MODE) { - sender->panel_mode |= MDFLD_DSI_PANEL_MODE_SLEEP; - /*TODO: replace it with msleep later*/ - mdelay(120); - } else if (cmd == DCS_EXIT_SLEEP_MODE) { - sender->panel_mode &= ~MDFLD_DSI_PANEL_MODE_SLEEP; - /*TODO: replace it with msleep later*/ - mdelay(120); - } else if (unlikely(cmd == DCS_SOFT_RESET)) { - /*TODO: replace it with msleep later*/ - mdelay(5); - } - sender->status = MDFLD_DSI_PKG_SENDER_FREE; - return 0; - -} - -static int do_send_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - int ret; - - if (sender->status == MDFLD_DSI_PKG_SENDER_BUSY) { - dev_err(sender->dev->dev, "sender is busy\n"); - return -EAGAIN; - } - - ret = send_pkg_prepare(sender, pkg); - if (ret) { - dev_err(sender->dev->dev, "send_pkg_prepare error\n"); - return ret; - } - - switch (pkg->pkg_type) { - case MDFLD_DSI_PKG_DCS: - ret = send_dcs_pkg(sender, pkg); - break; - case MDFLD_DSI_PKG_GEN_SHORT_WRITE_0: - case MDFLD_DSI_PKG_GEN_SHORT_WRITE_1: - case MDFLD_DSI_PKG_GEN_SHORT_WRITE_2: - case MDFLD_DSI_PKG_GEN_READ_0: - case MDFLD_DSI_PKG_GEN_READ_1: - case MDFLD_DSI_PKG_GEN_READ_2: - ret = send_gen_short_pkg(sender, pkg); - break; - case MDFLD_DSI_PKG_GEN_LONG_WRITE: - ret = send_gen_long_pkg(sender, pkg); - break; - case MDFLD_DSI_PKG_MCS_SHORT_WRITE_0: - case MDFLD_DSI_PKG_MCS_SHORT_WRITE_1: - case MDFLD_DSI_PKG_MCS_READ: - ret = send_mcs_short_pkg(sender, pkg); - break; - case MDFLD_DSI_PKG_MCS_LONG_WRITE: - ret = send_mcs_long_pkg(sender, pkg); - break; - default: - dev_err(sender->dev->dev, "Invalid pkg type 0x%x\n", - pkg->pkg_type); - ret = -EINVAL; - } - send_pkg_done(sender, pkg); - return ret; -} - -static int send_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - int err ; - - /* Handle DSI error */ - err = dsi_error_handler(sender); - if (err) { - dev_err(sender->dev->dev, "Error handling failed\n"); - err = -EAGAIN; - goto send_pkg_err; - } - - /* Send pkg */ - err = do_send_pkg(sender, pkg); - if (err) { - dev_err(sender->dev->dev, "sent pkg failed\n"); - err = -EAGAIN; - goto send_pkg_err; - } - - /* FIXME: should I query complete and fifo empty here? */ -send_pkg_err: - return err; -} - -static struct mdfld_dsi_pkg *pkg_sender_get_pkg_locked( - struct mdfld_dsi_pkg_sender *sender) -{ - struct mdfld_dsi_pkg *pkg; - - if (list_empty(&sender->free_list)) { - dev_err(sender->dev->dev, "No free pkg left\n"); - return NULL; - } - pkg = list_first_entry(&sender->free_list, struct mdfld_dsi_pkg, entry); - /* Detach from free list */ - list_del_init(&pkg->entry); - return pkg; -} - -static void pkg_sender_put_pkg_locked(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg) -{ - memset(pkg, 0, sizeof(struct mdfld_dsi_pkg)); - INIT_LIST_HEAD(&pkg->entry); - list_add_tail(&pkg->entry, &sender->free_list); -} - -static int mdfld_dbi_cb_init(struct mdfld_dsi_pkg_sender *sender, - struct psb_gtt *pg, int pipe) -{ - unsigned long phys; - void *virt_addr = NULL; - - switch (pipe) { - case 0: - /* FIXME: Doesn't this collide with stolen space ? */ - phys = pg->gtt_phys_start - 0x1000; - break; - case 2: - phys = pg->gtt_phys_start - 0x800; - break; - default: - dev_err(sender->dev->dev, "Unsupported channel %d\n", pipe); - return -EINVAL; - } - - virt_addr = ioremap_nocache(phys, 0x800); - if (!virt_addr) { - dev_err(sender->dev->dev, "Map DBI command buffer error\n"); - return -ENOMEM; - } - sender->dbi_cb_phy = phys; - sender->dbi_cb_addr = virt_addr; - return 0; -} - -static void mdfld_dbi_cb_destroy(struct mdfld_dsi_pkg_sender *sender) -{ - if (sender && sender->dbi_cb_addr) - iounmap(sender->dbi_cb_addr); -} - -static void pkg_sender_queue_pkg(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg, - int delay) -{ - unsigned long flags; - - spin_lock_irqsave(&sender->lock, flags); - - if (!delay) { - send_pkg(sender, pkg); - pkg_sender_put_pkg_locked(sender, pkg); - } else { - /* Queue it */ - list_add_tail(&pkg->entry, &sender->pkg_list); - } - spin_unlock_irqrestore(&sender->lock, flags); -} - -static void process_pkg_list(struct mdfld_dsi_pkg_sender *sender) -{ - struct mdfld_dsi_pkg *pkg; - unsigned long flags; - - spin_lock_irqsave(&sender->lock, flags); - - while (!list_empty(&sender->pkg_list)) { - pkg = list_first_entry(&sender->pkg_list, - struct mdfld_dsi_pkg, entry); - send_pkg(sender, pkg); - list_del_init(&pkg->entry); - pkg_sender_put_pkg_locked(sender, pkg); - } - - spin_unlock_irqrestore(&sender->lock, flags); -} - -static int mdfld_dsi_send_mcs_long(struct mdfld_dsi_pkg_sender *sender, - u32 *data, u32 len, u8 transmission, int delay) -{ - struct mdfld_dsi_pkg *pkg; - unsigned long flags; - - spin_lock_irqsave(&sender->lock, flags); - pkg = pkg_sender_get_pkg_locked(sender); - spin_unlock_irqrestore(&sender->lock, flags); - - if (!pkg) { - dev_err(sender->dev->dev, "No memory\n"); - return -ENOMEM; - } - pkg->pkg_type = MDFLD_DSI_PKG_MCS_LONG_WRITE; - pkg->transmission_type = transmission; - pkg->pkg.long_pkg.data = data; - pkg->pkg.long_pkg.len = len; - INIT_LIST_HEAD(&pkg->entry); - - pkg_sender_queue_pkg(sender, pkg, delay); - return 0; -} - -static int mdfld_dsi_send_mcs_short(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, u8 param, u8 param_num, - u8 transmission, - int delay) -{ - struct mdfld_dsi_pkg *pkg; - unsigned long flags; - - spin_lock_irqsave(&sender->lock, flags); - pkg = pkg_sender_get_pkg_locked(sender); - spin_unlock_irqrestore(&sender->lock, flags); - - if (!pkg) { - dev_err(sender->dev->dev, "No memory\n"); - return -ENOMEM; - } - - if (param_num) { - pkg->pkg_type = MDFLD_DSI_PKG_MCS_SHORT_WRITE_1; - pkg->pkg.short_pkg.param = param; - } else { - pkg->pkg_type = MDFLD_DSI_PKG_MCS_SHORT_WRITE_0; - pkg->pkg.short_pkg.param = 0; - } - pkg->transmission_type = transmission; - pkg->pkg.short_pkg.cmd = cmd; - INIT_LIST_HEAD(&pkg->entry); - - pkg_sender_queue_pkg(sender, pkg, delay); - return 0; -} - -static int mdfld_dsi_send_gen_short(struct mdfld_dsi_pkg_sender *sender, - u8 param0, u8 param1, u8 param_num, - u8 transmission, - int delay) -{ - struct mdfld_dsi_pkg *pkg; - unsigned long flags; - - spin_lock_irqsave(&sender->lock, flags); - pkg = pkg_sender_get_pkg_locked(sender); - spin_unlock_irqrestore(&sender->lock, flags); - - if (!pkg) { - dev_err(sender->dev->dev, "No pkg memory\n"); - return -ENOMEM; - } - - switch (param_num) { - case 0: - pkg->pkg_type = MDFLD_DSI_PKG_GEN_SHORT_WRITE_0; - pkg->pkg.short_pkg.cmd = 0; - pkg->pkg.short_pkg.param = 0; - break; - case 1: - pkg->pkg_type = MDFLD_DSI_PKG_GEN_SHORT_WRITE_1; - pkg->pkg.short_pkg.cmd = param0; - pkg->pkg.short_pkg.param = 0; - break; - case 2: - pkg->pkg_type = MDFLD_DSI_PKG_GEN_SHORT_WRITE_2; - pkg->pkg.short_pkg.cmd = param0; - pkg->pkg.short_pkg.param = param1; - break; - } - - pkg->transmission_type = transmission; - INIT_LIST_HEAD(&pkg->entry); - - pkg_sender_queue_pkg(sender, pkg, delay); - return 0; -} - -static int mdfld_dsi_send_gen_long(struct mdfld_dsi_pkg_sender *sender, - u32 *data, u32 len, u8 transmission, int delay) -{ - struct mdfld_dsi_pkg *pkg; - unsigned long flags; - - spin_lock_irqsave(&sender->lock, flags); - pkg = pkg_sender_get_pkg_locked(sender); - spin_unlock_irqrestore(&sender->lock, flags); - - if (!pkg) { - dev_err(sender->dev->dev, "No pkg memory\n"); - return -ENOMEM; - } - - pkg->pkg_type = MDFLD_DSI_PKG_GEN_LONG_WRITE; - pkg->transmission_type = transmission; - pkg->pkg.long_pkg.data = data; - pkg->pkg.long_pkg.len = len; - - INIT_LIST_HEAD(&pkg->entry); - - pkg_sender_queue_pkg(sender, pkg, delay); - - return 0; -} - -static int __read_panel_data(struct mdfld_dsi_pkg_sender *sender, - struct mdfld_dsi_pkg *pkg, - u32 *data, - u16 len) -{ - unsigned long flags; - struct drm_device *dev = sender->dev; - int i; - u32 gen_data_reg; - int retry = MDFLD_DSI_READ_MAX_COUNT; - u8 transmission = pkg->transmission_type; - - /* - * do reading. - * 0) send out generic read request - * 1) polling read data avail interrupt - * 2) read data - */ - spin_lock_irqsave(&sender->lock, flags); - - REG_WRITE(sender->mipi_intr_stat_reg, 1 << 29); - - if ((REG_READ(sender->mipi_intr_stat_reg) & (1 << 29))) - DRM_ERROR("Can NOT clean read data valid interrupt\n"); - - /*send out read request*/ - send_pkg(sender, pkg); - - pkg_sender_put_pkg_locked(sender, pkg); - - /*polling read data avail interrupt*/ - while (retry && !(REG_READ(sender->mipi_intr_stat_reg) & (1 << 29))) { - udelay(100); - retry--; - } - - if (!retry) { - spin_unlock_irqrestore(&sender->lock, flags); - return -ETIMEDOUT; - } - - REG_WRITE(sender->mipi_intr_stat_reg, (1 << 29)); - - /*read data*/ - if (transmission == MDFLD_DSI_HS_TRANSMISSION) - gen_data_reg = sender->mipi_hs_gen_data_reg; - else if (transmission == MDFLD_DSI_LP_TRANSMISSION) - gen_data_reg = sender->mipi_lp_gen_data_reg; - else { - DRM_ERROR("Unknown transmission"); - spin_unlock_irqrestore(&sender->lock, flags); - return -EINVAL; - } - - for (i=0; ilock, flags); - - return 0; -} - -static int mdfld_dsi_read_gen(struct mdfld_dsi_pkg_sender *sender, - u8 param0, - u8 param1, - u8 param_num, - u32 *data, - u16 len, - u8 transmission) -{ - struct mdfld_dsi_pkg *pkg; - unsigned long flags; - - spin_lock_irqsave(&sender->lock, flags); - - pkg = pkg_sender_get_pkg_locked(sender); - - spin_unlock_irqrestore(&sender->lock,flags); - - if (!pkg) { - dev_err(sender->dev->dev, "No pkg memory\n"); - return -ENOMEM; - } - - switch (param_num) { - case 0: - pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_0; - pkg->pkg.short_pkg.cmd = 0; - pkg->pkg.short_pkg.param = 0; - break; - case 1: - pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_1; - pkg->pkg.short_pkg.cmd = param0; - pkg->pkg.short_pkg.param = 0; - break; - case 2: - pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_2; - pkg->pkg.short_pkg.cmd = param0; - pkg->pkg.short_pkg.param = param1; - break; - } - - pkg->transmission_type = transmission; - - INIT_LIST_HEAD(&pkg->entry); - - return __read_panel_data(sender, pkg, data, len); -} - -static int mdfld_dsi_read_mcs(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, - u32 *data, - u16 len, - u8 transmission) -{ - struct mdfld_dsi_pkg *pkg; - unsigned long flags; - - spin_lock_irqsave(&sender->lock, flags); - - pkg = pkg_sender_get_pkg_locked(sender); - - spin_unlock_irqrestore(&sender->lock, flags); - - if (!pkg) { - dev_err(sender->dev->dev, "No pkg memory\n"); - return -ENOMEM; - } - - pkg->pkg_type = MDFLD_DSI_PKG_MCS_READ; - pkg->pkg.short_pkg.cmd = cmd; - pkg->pkg.short_pkg.param = 0; - - pkg->transmission_type = transmission; - - INIT_LIST_HEAD(&pkg->entry); - - return __read_panel_data(sender, pkg, data, len); -} - -void dsi_controller_dbi_init(struct mdfld_dsi_config * dsi_config, int pipe) -{ - struct drm_device * dev = dsi_config->dev; - u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - int lane_count = dsi_config->lane_count; - u32 val = 0; - - /*un-ready device*/ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); - - /*init dsi adapter before kicking off*/ - REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018); - - /*TODO: figure out how to setup these registers*/ - REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408); - REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), 0x000a0014); - REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400); - REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000001); - REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000); - - /*enable all interrupts*/ - REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff); - /*max value: 20 clock cycles of txclkesc*/ - REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f); - /*min 21 txclkesc, max: ffffh*/ - REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff); - /*min: 7d0 max: 4e20*/ - REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0); - - /*set up max return packet size*/ - REG_WRITE((MIPIA_MAX_RETURN_PACK_SIZE_REG + reg_offset), - MDFLD_DSI_MAX_RETURN_PACKET_SIZE); - - /*set up func_prg*/ - val |= lane_count; - val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET); - val |= DSI_DBI_COLOR_FORMAT_OPTION2; - REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val); - - REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff); - REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff); - - REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46); - REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000); - REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004); - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001); -} - -void dsi_controller_dpi_init(struct mdfld_dsi_config * dsi_config, int pipe) -{ - struct drm_device * dev = dsi_config->dev; - u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - int lane_count = dsi_config->lane_count; - struct mdfld_dsi_dpi_timing dpi_timing; - struct drm_display_mode * mode = dsi_config->mode; - u32 val = 0; - - /*un-ready device*/ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); - - /*init dsi adapter before kicking off*/ - REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018); - - /*enable all interrupts*/ - REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff); - - /*set up func_prg*/ - val |= lane_count; - val |= dsi_config->channel_num << DSI_DPI_VIRT_CHANNEL_OFFSET; - - switch(dsi_config->bpp) { - case 16: - val |= DSI_DPI_COLOR_FORMAT_RGB565; - break; - case 18: - val |= DSI_DPI_COLOR_FORMAT_RGB666; - break; - case 24: - val |= DSI_DPI_COLOR_FORMAT_RGB888; - break; - default: - DRM_ERROR("unsupported color format, bpp = %d\n", dsi_config->bpp); - } - - REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val); - - REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), - (mode->vtotal * mode->htotal * dsi_config->bpp / (8 * lane_count)) & DSI_HS_TX_TIMEOUT_MASK); - REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff & DSI_LP_RX_TIMEOUT_MASK); - - /*max value: 20 clock cycles of txclkesc*/ - REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x14 & DSI_TURN_AROUND_TIMEOUT_MASK); - - /*min 21 txclkesc, max: ffffh*/ - REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0xffff & DSI_RESET_TIMER_MASK); - - REG_WRITE((MIPIA_DPI_RESOLUTION_REG + reg_offset), mode->vdisplay << 16 | mode->hdisplay); - - /*set DPI timing registers*/ - mdfld_dsi_dpi_timing_calculation(mode, &dpi_timing, dsi_config->lane_count, dsi_config->bpp); - - REG_WRITE((MIPIA_HSYNC_COUNT_REG + reg_offset), dpi_timing.hsync_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_HBP_COUNT_REG + reg_offset), dpi_timing.hbp_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_HFP_COUNT_REG + reg_offset), dpi_timing.hfp_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_HACTIVE_COUNT_REG + reg_offset), dpi_timing.hactive_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_VSYNC_COUNT_REG + reg_offset), dpi_timing.vsync_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_VBP_COUNT_REG + reg_offset), dpi_timing.vbp_count & DSI_DPI_TIMING_MASK); - REG_WRITE((MIPIA_VFP_COUNT_REG + reg_offset), dpi_timing.vfp_count & DSI_DPI_TIMING_MASK); - - REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46); - - /*min: 7d0 max: 4e20*/ - REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x000007d0); - - /*set up video mode*/ - val = dsi_config->video_mode | DSI_DPI_COMPLETE_LAST_LINE; - REG_WRITE((MIPIA_VIDEO_MODE_FORMAT_REG + reg_offset), val); - - REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000); - - REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004); - - /*TODO: figure out how to setup these registers*/ - REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408); - - REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), (0xa << 16) | 0x14); - - /*set device ready*/ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001); -} - -static void dsi_controller_init(struct mdfld_dsi_config * dsi_config, int pipe) -{ - if (!dsi_config || ((pipe != 0) && (pipe != 2))) { - DRM_ERROR("Invalid parameters\n"); - return; - } - - if (dsi_config->type == MDFLD_DSI_ENCODER_DPI) - dsi_controller_dpi_init(dsi_config, pipe); - else if (dsi_config->type == MDFLD_DSI_ENCODER_DBI) - dsi_controller_dbi_init(dsi_config, pipe); - else - DRM_ERROR("Bad DSI encoder type\n"); -} - -void mdfld_dsi_cmds_kick_out(struct mdfld_dsi_pkg_sender *sender) -{ - process_pkg_list(sender); -} - -int mdfld_dsi_send_dcs(struct mdfld_dsi_pkg_sender *sender, - u8 dcs, u8 *param, u32 param_num, u8 data_src, - int delay) -{ - struct mdfld_dsi_pkg *pkg; - u32 cb_phy = sender->dbi_cb_phy; - struct drm_device *dev = sender->dev; - u32 index = 0; - u8 *cb = (u8 *)sender->dbi_cb_addr; - unsigned long flags; - int retry; - u8 *dst = NULL; - u32 len; - - if (!sender) { - WARN_ON(1); - return -EINVAL; - } - - if (!sender->dbi_pkg_support) { - dev_err(dev->dev, "No DBI pkg sending on this sender\n"); - return -ENOTSUPP; - } - - if (param_num > MDFLD_MAX_DCS_PARAM) { - dev_err(dev->dev, "Sender only supports up to %d DCS params\n", - MDFLD_MAX_DCS_PARAM); - return -EINVAL; - } - - /* - * If dcs is write_mem_start, send it directly using DSI adapter - * interface - */ - if (dcs == DCS_WRITE_MEM_START) { - if (!spin_trylock(&sender->lock)) - return -EAGAIN; - - /* - * query whether DBI FIFO is empty, - * if not wait it becoming empty - */ - retry = MDFLD_DSI_DBI_FIFO_TIMEOUT; - while (retry && - !(REG_READ(sender->mipi_gen_fifo_stat_reg) & (1 << 27))) { - udelay(500); - retry--; - } - - /* If DBI FIFO timeout, drop this frame */ - if (!retry) { - spin_unlock(&sender->lock); - return 0; - } - - *(cb + (index++)) = write_mem_start; - - REG_WRITE(sender->mipi_cmd_len_reg, 1); - REG_WRITE(sender->mipi_cmd_addr_reg, - cb_phy | (1 << 0) | (1 << 1)); - - retry = MDFLD_DSI_DBI_FIFO_TIMEOUT; - while (retry && - (REG_READ(sender->mipi_cmd_addr_reg) & (1 << 0))) { - udelay(1); - retry--; - } - - spin_unlock(&sender->lock); - return 0; - } - - /* Get a free pkg */ - spin_lock_irqsave(&sender->lock, flags); - pkg = pkg_sender_get_pkg_locked(sender); - spin_unlock_irqrestore(&sender->lock, flags); - - if (!pkg) { - dev_err(dev->dev, "No packages memory\n"); - return -ENOMEM; - } - - dst = pkg->pkg.dcs_pkg.param; - memcpy(dst, param, param_num); - - pkg->pkg_type = MDFLD_DSI_PKG_DCS; - pkg->transmission_type = MDFLD_DSI_DCS; - pkg->pkg.dcs_pkg.cmd = dcs; - pkg->pkg.dcs_pkg.param_num = param_num; - pkg->pkg.dcs_pkg.data_src = data_src; - - INIT_LIST_HEAD(&pkg->entry); - - if (param_num == 0) - return mdfld_dsi_send_mcs_short_hs(sender, dcs, 0, 0, delay); - else if (param_num == 1) - return mdfld_dsi_send_mcs_short_hs(sender, dcs, - param[0], 1, delay); - else if (param_num > 1) { - len = (param_num + 1) / 4; - if ((param_num + 1) % 4) - len++; - return mdfld_dsi_send_mcs_long_hs(sender, - (u32 *)&pkg->pkg.dcs_pkg, len, delay); - } - return 0; -} - -int mdfld_dsi_send_mcs_short_hs(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, u8 param, u8 param_num, int delay) -{ - if (!sender) { - WARN_ON(1); - return -EINVAL; - } - return mdfld_dsi_send_mcs_short(sender, cmd, param, param_num, - MDFLD_DSI_HS_TRANSMISSION, delay); -} - -int mdfld_dsi_send_mcs_short_lp(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, u8 param, u8 param_num, int delay) -{ - if (!sender) { - WARN_ON(1); - return -EINVAL; - } - return mdfld_dsi_send_mcs_short(sender, cmd, param, param_num, - MDFLD_DSI_LP_TRANSMISSION, delay); -} - -int mdfld_dsi_send_mcs_long_hs(struct mdfld_dsi_pkg_sender *sender, - u32 *data, - u32 len, - int delay) -{ - if (!sender || !data || !len) { - DRM_ERROR("Invalid parameters\n"); - return -EINVAL; - } - return mdfld_dsi_send_mcs_long(sender, data, len, - MDFLD_DSI_HS_TRANSMISSION, delay); -} - -int mdfld_dsi_send_mcs_long_lp(struct mdfld_dsi_pkg_sender *sender, - u32 *data, - u32 len, - int delay) -{ - if (!sender || !data || !len) { - WARN_ON(1); - return -EINVAL; - } - return mdfld_dsi_send_mcs_long(sender, data, len, - MDFLD_DSI_LP_TRANSMISSION, delay); -} - -int mdfld_dsi_send_gen_short_hs(struct mdfld_dsi_pkg_sender *sender, - u8 param0, u8 param1, u8 param_num, int delay) -{ - if (!sender) { - WARN_ON(1); - return -EINVAL; - } - return mdfld_dsi_send_gen_short(sender, param0, param1, param_num, - MDFLD_DSI_HS_TRANSMISSION, delay); -} - -int mdfld_dsi_send_gen_short_lp(struct mdfld_dsi_pkg_sender *sender, - u8 param0, u8 param1, u8 param_num, int delay) -{ - if (!sender || param_num < 0 || param_num > 2) { - WARN_ON(1); - return -EINVAL; - } - return mdfld_dsi_send_gen_short(sender, param0, param1, param_num, - MDFLD_DSI_LP_TRANSMISSION, delay); -} - -int mdfld_dsi_send_gen_long_hs(struct mdfld_dsi_pkg_sender *sender, - u32 *data, - u32 len, - int delay) -{ - if (!sender || !data || !len) { - WARN_ON(1); - return -EINVAL; - } - return mdfld_dsi_send_gen_long(sender, data, len, - MDFLD_DSI_HS_TRANSMISSION, delay); -} - -int mdfld_dsi_send_gen_long_lp(struct mdfld_dsi_pkg_sender *sender, - u32 *data, - u32 len, - int delay) -{ - if (!sender || !data || !len) { - WARN_ON(1); - return -EINVAL; - } - return mdfld_dsi_send_gen_long(sender, data, len, - MDFLD_DSI_LP_TRANSMISSION, delay); -} - -int mdfld_dsi_read_gen_hs(struct mdfld_dsi_pkg_sender *sender, - u8 param0, - u8 param1, - u8 param_num, - u32 *data, - u16 len) -{ - if (!sender || !data || param_num < 0 || param_num > 2 - || !data || !len) { - DRM_ERROR("Invalid parameters\n"); - return -EINVAL; - } - - return mdfld_dsi_read_gen(sender, param0, param1, param_num, - data, len, MDFLD_DSI_HS_TRANSMISSION); - -} - -int mdfld_dsi_read_gen_lp(struct mdfld_dsi_pkg_sender *sender, - u8 param0, - u8 param1, - u8 param_num, - u32 *data, - u16 len) -{ - if (!sender || !data || param_num < 0 || param_num > 2 - || !data || !len) { - DRM_ERROR("Invalid parameters\n"); - return -EINVAL; - } - - return mdfld_dsi_read_gen(sender, param0, param1, param_num, - data, len, MDFLD_DSI_LP_TRANSMISSION); -} - -int mdfld_dsi_read_mcs_hs(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, - u32 *data, - u16 len) -{ - if (!sender || !data || !len) { - DRM_ERROR("Invalid parameters\n"); - return -EINVAL; - } - - return mdfld_dsi_read_mcs(sender, cmd, data, len, - MDFLD_DSI_HS_TRANSMISSION); -} - -int mdfld_dsi_read_mcs_lp(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, - u32 *data, - u16 len) -{ - if (!sender || !data || !len) { - WARN_ON(1); - return -EINVAL; - } - - return mdfld_dsi_read_mcs(sender, cmd, data, len, - MDFLD_DSI_LP_TRANSMISSION); -} - -int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector, - int pipe) -{ - int ret; - struct mdfld_dsi_pkg_sender *pkg_sender; - struct mdfld_dsi_config *dsi_config = - mdfld_dsi_get_config(dsi_connector); - struct drm_device *dev = dsi_config->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_gtt *pg = &dev_priv->gtt; - int i; - struct mdfld_dsi_pkg *pkg, *tmp; - u32 mipi_val = 0; - - if (!dsi_connector) { - WARN_ON(1); - return -EINVAL; - } - - pkg_sender = dsi_connector->pkg_sender; - - if (!pkg_sender || IS_ERR(pkg_sender)) { - pkg_sender = kzalloc(sizeof(struct mdfld_dsi_pkg_sender), - GFP_KERNEL); - if (!pkg_sender) { - dev_err(dev->dev, "Create DSI pkg sender failed\n"); - return -ENOMEM; - } - - dsi_connector->pkg_sender = (void *)pkg_sender; - } - - pkg_sender->dev = dev; - pkg_sender->dsi_connector = dsi_connector; - pkg_sender->pipe = pipe; - pkg_sender->pkg_num = 0; - pkg_sender->panel_mode = 0; - pkg_sender->status = MDFLD_DSI_PKG_SENDER_FREE; - - /* Init dbi command buffer*/ - - if (dsi_config->type == MDFLD_DSI_ENCODER_DBI) { - pkg_sender->dbi_pkg_support = 1; - ret = mdfld_dbi_cb_init(pkg_sender, pg, pipe); - if (ret) { - dev_err(dev->dev, "DBI command buffer map failed\n"); - goto mapping_err; - } - } - - /* Init regs */ - if (pipe == 0) { - pkg_sender->dpll_reg = MRST_DPLL_A; - pkg_sender->dspcntr_reg = DSPACNTR; - pkg_sender->pipeconf_reg = PIPEACONF; - pkg_sender->dsplinoff_reg = DSPALINOFF; - pkg_sender->dspsurf_reg = DSPASURF; - pkg_sender->pipestat_reg = PIPEASTAT; - - pkg_sender->mipi_intr_stat_reg = MIPIA_INTR_STAT_REG; - pkg_sender->mipi_lp_gen_data_reg = MIPIA_LP_GEN_DATA_REG; - pkg_sender->mipi_hs_gen_data_reg = MIPIA_HS_GEN_DATA_REG; - pkg_sender->mipi_lp_gen_ctrl_reg = MIPIA_LP_GEN_CTRL_REG; - pkg_sender->mipi_hs_gen_ctrl_reg = MIPIA_HS_GEN_CTRL_REG; - pkg_sender->mipi_gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG; - pkg_sender->mipi_data_addr_reg = MIPIA_DATA_ADD_REG; - pkg_sender->mipi_data_len_reg = MIPIA_DATA_LEN_REG; - pkg_sender->mipi_cmd_addr_reg = MIPIA_CMD_ADD_REG; - pkg_sender->mipi_cmd_len_reg = MIPIA_CMD_LEN_REG; - } else if (pipe == 2) { - pkg_sender->dpll_reg = MRST_DPLL_A; - pkg_sender->dspcntr_reg = DSPCCNTR; - pkg_sender->pipeconf_reg = PIPECCONF; - pkg_sender->dsplinoff_reg = DSPCLINOFF; - pkg_sender->dspsurf_reg = DSPCSURF; - pkg_sender->pipestat_reg = PIPECSTAT; - - pkg_sender->mipi_intr_stat_reg = - MIPIA_INTR_STAT_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_lp_gen_data_reg = - MIPIA_LP_GEN_DATA_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_hs_gen_data_reg = - MIPIA_HS_GEN_DATA_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_lp_gen_ctrl_reg = - MIPIA_LP_GEN_CTRL_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_hs_gen_ctrl_reg = - MIPIA_HS_GEN_CTRL_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_gen_fifo_stat_reg = - MIPIA_GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_data_addr_reg = - MIPIA_DATA_ADD_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_data_len_reg = - MIPIA_DATA_LEN_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_cmd_addr_reg = - MIPIA_CMD_ADD_REG + MIPIC_REG_OFFSET; - pkg_sender->mipi_cmd_len_reg = - MIPIA_CMD_LEN_REG + MIPIC_REG_OFFSET; - } - - /* Init pkg list */ - INIT_LIST_HEAD(&pkg_sender->pkg_list); - INIT_LIST_HEAD(&pkg_sender->free_list); - - spin_lock_init(&pkg_sender->lock); - - /* Allocate free pkg pool */ - for (i = 0; i < MDFLD_MAX_PKG_NUM; i++) { - pkg = kzalloc(sizeof(struct mdfld_dsi_pkg), GFP_KERNEL); - if (!pkg) { - dev_err(dev->dev, "Out of memory allocating pkg pool"); - ret = -ENOMEM; - goto pkg_alloc_err; - } - INIT_LIST_HEAD(&pkg->entry); - list_add_tail(&pkg->entry, &pkg_sender->free_list); - } - - /* - * For video mode, don't enable DPI timing output here, - * will init the DPI timing output during mode setting. - */ - if (dsi_config->type == MDFLD_DSI_ENCODER_DPI) - mipi_val = PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX; - else if (dsi_config->type == MDFLD_DSI_ENCODER_DBI) - mipi_val = PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX - | TE_TRIGGER_GPIO_PIN; - else - DRM_ERROR("Bad DSI encoder type\n"); - - if (pipe == 0) { - mipi_val |= 0x2; - REG_WRITE(MIPI, mipi_val); - REG_READ(MIPI); - } else if (pipe == 2) { - REG_WRITE(MIPI_C, mipi_val); - REG_READ(MIPI_C); - } - - /*do dsi controller init*/ - dsi_controller_init(dsi_config, pipe); - - return 0; - -pkg_alloc_err: - list_for_each_entry_safe(pkg, tmp, &pkg_sender->free_list, entry) { - list_del(&pkg->entry); - kfree(pkg); - } - - /* Free mapped command buffer */ - mdfld_dbi_cb_destroy(pkg_sender); -mapping_err: - kfree(pkg_sender); - dsi_connector->pkg_sender = NULL; - return ret; -} - -void mdfld_dsi_pkg_sender_destroy(struct mdfld_dsi_pkg_sender *sender) -{ - struct mdfld_dsi_pkg *pkg, *tmp; - - if (!sender || IS_ERR(sender)) - return; - - /* Free pkg pool */ - list_for_each_entry_safe(pkg, tmp, &sender->free_list, entry) { - list_del(&pkg->entry); - kfree(pkg); - } - /* Free pkg list */ - list_for_each_entry_safe(pkg, tmp, &sender->pkg_list, entry) { - list_del(&pkg->entry); - kfree(pkg); - } - mdfld_dbi_cb_destroy(sender); /* free mapped command buffer */ - kfree(sender); -} diff --git a/drivers/staging/gma500/mdfld_dsi_pkg_sender.h b/drivers/staging/gma500/mdfld_dsi_pkg_sender.h deleted file mode 100644 index f24abc700684..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_pkg_sender.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Jackie Li - */ -#ifndef __MDFLD_DSI_PKG_SENDER_H__ -#define __MDFLD_DSI_PKG_SENDER_H__ - -#include - -#define MDFLD_MAX_DCS_PARAM 8 -#define MDFLD_MAX_PKG_NUM 2048 - -enum { - MDFLD_DSI_PKG_DCS, - MDFLD_DSI_PKG_GEN_SHORT_WRITE_0 = 0x03, - MDFLD_DSI_PKG_GEN_SHORT_WRITE_1 = 0x13, - MDFLD_DSI_PKG_GEN_SHORT_WRITE_2 = 0x23, - MDFLD_DSI_PKG_GEN_READ_0 = 0x04, - MDFLD_DSI_PKG_GEN_READ_1 = 0x14, - MDFLD_DSI_PKG_GEN_READ_2 = 0x24, - MDFLD_DSI_PKG_GEN_LONG_WRITE = 0x29, - MDFLD_DSI_PKG_MCS_SHORT_WRITE_0 = 0x05, - MDFLD_DSI_PKG_MCS_SHORT_WRITE_1 = 0x15, - MDFLD_DSI_PKG_MCS_READ = 0x06, - MDFLD_DSI_PKG_MCS_LONG_WRITE = 0x39, -}; - -enum { - MDFLD_DSI_LP_TRANSMISSION, - MDFLD_DSI_HS_TRANSMISSION, - MDFLD_DSI_DCS, -}; - -enum { - MDFLD_DSI_PANEL_MODE_SLEEP = 0x1, -}; - -enum { - MDFLD_DSI_PKG_SENDER_FREE = 0x0, - MDFLD_DSI_PKG_SENDER_BUSY = 0x1, -}; - -enum { - MDFLD_DSI_SEND_PACKAGE, - MDFLD_DSI_QUEUE_PACKAGE, -}; - -struct mdfld_dsi_gen_short_pkg { - u8 cmd; - u8 param; -}; - -struct mdfld_dsi_gen_long_pkg { - u32 *data; - u32 len; -}; - -struct mdfld_dsi_dcs_pkg { - u8 cmd; - u8 param[MDFLD_MAX_DCS_PARAM]; - u32 param_num; - u8 data_src; -}; - -struct mdfld_dsi_pkg { - u8 pkg_type; - u8 transmission_type; - - union { - struct mdfld_dsi_gen_short_pkg short_pkg; - struct mdfld_dsi_gen_long_pkg long_pkg; - struct mdfld_dsi_dcs_pkg dcs_pkg; - } pkg; - - struct list_head entry; -}; - -struct mdfld_dsi_pkg_sender { - struct drm_device *dev; - struct mdfld_dsi_connector *dsi_connector; - u32 status; - - u32 panel_mode; - - int pipe; - - spinlock_t lock; - struct list_head pkg_list; - struct list_head free_list; - - u32 pkg_num; - - int dbi_pkg_support; - - u32 dbi_cb_phy; - void *dbi_cb_addr; - - /* Registers */ - u32 dpll_reg; - u32 dspcntr_reg; - u32 pipeconf_reg; - u32 pipestat_reg; - u32 dsplinoff_reg; - u32 dspsurf_reg; - - u32 mipi_intr_stat_reg; - u32 mipi_lp_gen_data_reg; - u32 mipi_hs_gen_data_reg; - u32 mipi_lp_gen_ctrl_reg; - u32 mipi_hs_gen_ctrl_reg; - u32 mipi_gen_fifo_stat_reg; - u32 mipi_data_addr_reg; - u32 mipi_data_len_reg; - u32 mipi_cmd_addr_reg; - u32 mipi_cmd_len_reg; -}; - -/* DCS definitions */ -#define DCS_SOFT_RESET 0x01 -#define DCS_ENTER_SLEEP_MODE 0x10 -#define DCS_EXIT_SLEEP_MODE 0x11 -#define DCS_SET_DISPLAY_OFF 0x28 -#define DCS_SET_DISPLAY_ON 0x29 -#define DCS_SET_COLUMN_ADDRESS 0x2a -#define DCS_SET_PAGE_ADDRESS 0x2b -#define DCS_WRITE_MEM_START 0x2c -#define DCS_SET_TEAR_OFF 0x34 -#define DCS_SET_TEAR_ON 0x35 - -extern int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector, - int pipe); -extern void mdfld_dsi_pkg_sender_destroy(struct mdfld_dsi_pkg_sender *sender); -extern int mdfld_dsi_send_dcs(struct mdfld_dsi_pkg_sender *sender, u8 dcs, - u8 *param, u32 param_num, u8 data_src, int delay); -extern int mdfld_dsi_send_mcs_short_hs(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, u8 param, u8 param_num, int delay); -extern int mdfld_dsi_send_mcs_short_lp(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, u8 param, u8 param_num, int delay); -extern int mdfld_dsi_send_mcs_long_hs(struct mdfld_dsi_pkg_sender *sender, - u32 *data, u32 len, int delay); -extern int mdfld_dsi_send_mcs_long_lp(struct mdfld_dsi_pkg_sender *sender, - u32 *data, u32 len, int delay); -extern int mdfld_dsi_send_gen_short_hs(struct mdfld_dsi_pkg_sender *sender, - u8 param0, u8 param1, u8 param_num, int delay); -extern int mdfld_dsi_send_gen_short_lp(struct mdfld_dsi_pkg_sender *sender, - u8 param0, u8 param1, u8 param_num, int delay); -extern int mdfld_dsi_send_gen_long_hs(struct mdfld_dsi_pkg_sender *sender, - u32 *data, u32 len, int delay); -extern int mdfld_dsi_send_gen_long_lp(struct mdfld_dsi_pkg_sender *sender, - u32 *data, u32 len, int delay); - -extern int mdfld_dsi_read_gen_hs(struct mdfld_dsi_pkg_sender *sender, - u8 param0, u8 param1, u8 param_num, u32 *data, u16 len); -extern int mdfld_dsi_read_gen_lp(struct mdfld_dsi_pkg_sender *sender, - u8 param0, u8 param1, u8 param_num, u32 *data, u16 len); -extern int mdfld_dsi_read_mcs_hs(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, u32 *data, u16 len); -extern int mdfld_dsi_read_mcs_lp(struct mdfld_dsi_pkg_sender *sender, - u8 cmd, u32 *data, u16 len); - -extern void mdfld_dsi_cmds_kick_out(struct mdfld_dsi_pkg_sender *sender); - -#endif /* __MDFLD_DSI_PKG_SENDER_H__ */ diff --git a/drivers/staging/gma500/mdfld_intel_display.c b/drivers/staging/gma500/mdfld_intel_display.c deleted file mode 100644 index 0b37b7b6b02a..000000000000 --- a/drivers/staging/gma500/mdfld_intel_display.c +++ /dev/null @@ -1,1404 +0,0 @@ -/* - * Copyright © 2006-2011 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Eric Anholt - */ - -#include "framebuffer.h" -#include "psb_intel_display.h" -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" -#include "mdfld_dsi_dbi_dpu.h" - -#include - -#ifdef MIN -#undef MIN -#endif - -#define MIN(x, y) (((x) < (y)) ? (x) : (y)) - -/* Hardcoded currently */ -static int ksel = KSEL_CRYSTAL_19; - -extern void mdfld_save_display(struct drm_device *dev); -extern bool gbgfxsuspended; - -struct psb_intel_range_t { - int min, max; -}; - -struct mdfld_limit_t { - struct psb_intel_range_t dot, m, p1; -}; - -struct mdfld_intel_clock_t { - /* given values */ - int n; - int m1, m2; - int p1, p2; - /* derived values */ - int dot; - int vco; - int m; - int p; -}; - - - -#define COUNT_MAX 0x10000000 - -void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe) -{ - int count, temp; - u32 pipeconf_reg = PIPEACONF; - - switch (pipe) { - case 0: - break; - case 1: - pipeconf_reg = PIPEBCONF; - break; - case 2: - pipeconf_reg = PIPECCONF; - break; - default: - DRM_ERROR("Illegal Pipe Number. \n"); - return; - } - - /* FIXME JLIU7_PO */ - psb_intel_wait_for_vblank(dev); - return; - - /* Wait for for the pipe disable to take effect. */ - for (count = 0; count < COUNT_MAX; count++) { - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_PIPE_STATE) == 0) - break; - } -} - -void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe) -{ - int count, temp; - u32 pipeconf_reg = PIPEACONF; - - switch (pipe) { - case 0: - break; - case 1: - pipeconf_reg = PIPEBCONF; - break; - case 2: - pipeconf_reg = PIPECCONF; - break; - default: - dev_err(dev->dev, "Illegal Pipe Number.\n"); - return; - } - - /* FIXME JLIU7_PO */ - psb_intel_wait_for_vblank(dev); - return; - - /* Wait for for the pipe enable to take effect. */ - for (count = 0; count < COUNT_MAX; count++) { - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_PIPE_STATE) == 1) - break; - } -} - - -static int mdfld_intel_crtc_cursor_set(struct drm_crtc *crtc, - struct drm_file *file_priv, - uint32_t handle, - uint32_t width, uint32_t height) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - uint32_t control = CURACNTR; - uint32_t base = CURABASE; - uint32_t temp; - size_t addr = 0; - struct gtt_range *gt; - struct drm_gem_object *obj; - int ret; - - switch (pipe) { - case 0: - break; - case 1: - control = CURBCNTR; - base = CURBBASE; - break; - case 2: - control = CURCCNTR; - base = CURCBASE; - break; - default: - dev_err(dev->dev, "Illegal Pipe Number. \n"); - return -EINVAL; - } - -#if 1 /* FIXME_JLIU7 can't enalbe cursorB/C HW issue. need to remove after HW fix */ - if (pipe != 0) - return 0; -#endif - /* if we want to turn of the cursor ignore width and height */ - if (!handle) { - dev_dbg(dev->dev, "cursor off\n"); - /* turn off the cursor */ - temp = 0; - temp |= CURSOR_MODE_DISABLE; - - if (gma_power_begin(dev, true)) { - REG_WRITE(control, temp); - REG_WRITE(base, 0); - gma_power_end(dev); - } - /* Unpin the old GEM object */ - if (psb_intel_crtc->cursor_obj) { - gt = container_of(psb_intel_crtc->cursor_obj, - struct gtt_range, gem); - psb_gtt_unpin(gt); - drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = NULL; - } - return 0; - } - - /* Currently we only support 64x64 cursors */ - if (width != 64 || height != 64) { - DRM_ERROR("we currently only support 64x64 cursors\n"); - return -EINVAL; - } - - obj = drm_gem_object_lookup(dev, file_priv, handle); - if (!obj) - return -ENOENT; - - if (obj->size < width * height * 4) { - dev_dbg(dev->dev, "buffer is to small\n"); - return -ENOMEM; - } - - gt = container_of(obj, struct gtt_range, gem); - - /* Pin the memory into the GTT */ - ret = psb_gtt_pin(gt); - if (ret) { - dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); - return ret; - } - - - addr = gt->offset; /* Or resource.start ??? */ - - psb_intel_crtc->cursor_addr = addr; - - temp = 0; - /* set the pipe for the cursor */ - temp |= (pipe << 28); - temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; - - if (gma_power_begin(dev, true)) { - REG_WRITE(control, temp); - REG_WRITE(base, addr); - gma_power_end(dev); - } - /* unpin the old GEM object */ - if (psb_intel_crtc->cursor_obj) { - gt = container_of(psb_intel_crtc->cursor_obj, - struct gtt_range, gem); - psb_gtt_unpin(gt); - drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = obj; - } - return 0; -} - -static int mdfld_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) -{ - struct drm_device *dev = crtc->dev; - struct drm_psb_private * dev_priv = (struct drm_psb_private *)dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - struct psb_drm_dpu_rect rect; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - uint32_t pos = CURAPOS; - uint32_t base = CURABASE; - uint32_t temp = 0; - uint32_t addr; - - switch (pipe) { - case 0: - if (dpu_info) { - rect.x = x; - rect.y = y; - - mdfld_dbi_dpu_report_damage(dev, MDFLD_CURSORA, &rect); - mdfld_dpu_exit_dsr(dev); - } else if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_0)) - mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_CURSOR_0); - break; - case 1: - pos = CURBPOS; - base = CURBBASE; - break; - case 2: - if (dpu_info) { - mdfld_dbi_dpu_report_damage(dev, MDFLD_CURSORC, &rect); - mdfld_dpu_exit_dsr(dev); - } else if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_2)) - mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_CURSOR_2); - pos = CURCPOS; - base = CURCBASE; - break; - default: - DRM_ERROR("Illegal Pipe Number. \n"); - return -EINVAL; - } - -#if 1 /* FIXME_JLIU7 can't enable cursorB/C HW issue. need to remove after HW fix */ - if (pipe != 0) - return 0; -#endif - if (x < 0) { - temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); - x = -x; - } - if (y < 0) { - temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); - y = -y; - } - - temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); - temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); - - addr = psb_intel_crtc->cursor_addr; - - if (gma_power_begin(dev, true)) { - REG_WRITE(pos, temp); - REG_WRITE(base, addr); - gma_power_end(dev); - } - - return 0; -} - -const struct drm_crtc_funcs mdfld_intel_crtc_funcs = { - .cursor_set = mdfld_intel_crtc_cursor_set, - .cursor_move = mdfld_intel_crtc_cursor_move, - .gamma_set = psb_intel_crtc_gamma_set, - .set_config = drm_crtc_helper_set_config, - .destroy = psb_intel_crtc_destroy, -}; - -static struct drm_device globle_dev; - -void mdfld__intel_plane_set_alpha(int enable) -{ - struct drm_device *dev = &globle_dev; - int dspcntr_reg = DSPACNTR; - u32 dspcntr; - - dspcntr = REG_READ(dspcntr_reg); - - if (enable) { - dspcntr &= ~DISPPLANE_32BPP_NO_ALPHA; - dspcntr |= DISPPLANE_32BPP; - } else { - dspcntr &= ~DISPPLANE_32BPP; - dspcntr |= DISPPLANE_32BPP_NO_ALPHA; - } - - REG_WRITE(dspcntr_reg, dspcntr); -} - -int mdfld__intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - /* struct drm_i915_master_private *master_priv; */ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); - int pipe = psb_intel_crtc->pipe; - unsigned long start, offset; - int dsplinoff = DSPALINOFF; - int dspsurf = DSPASURF; - int dspstride = DSPASTRIDE; - int dspcntr_reg = DSPACNTR; - u32 dspcntr; - int ret = 0; - - memcpy(&globle_dev, dev, sizeof(struct drm_device)); - - if (!gma_power_begin(dev, true)) - return 0; - - /* no fb bound */ - if (!crtc->fb) { - dev_err(dev->dev, "No FB bound\n"); - goto psb_intel_pipe_cleaner; - } - - switch (pipe) { - case 0: - dsplinoff = DSPALINOFF; - break; - case 1: - dsplinoff = DSPBLINOFF; - dspsurf = DSPBSURF; - dspstride = DSPBSTRIDE; - dspcntr_reg = DSPBCNTR; - break; - case 2: - dsplinoff = DSPCLINOFF; - dspsurf = DSPCSURF; - dspstride = DSPCSTRIDE; - dspcntr_reg = DSPCCNTR; - break; - default: - dev_err(dev->dev, "Illegal Pipe Number.\n"); - return -EINVAL; - } - - ret = psb_gtt_pin(psbfb->gtt); - if (ret < 0) - goto psb_intel_pipe_set_base_exit; - - start = psbfb->gtt->offset; - offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8); - - REG_WRITE(dspstride, crtc->fb->pitches[0]); - dspcntr = REG_READ(dspcntr_reg); - dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; - - switch (crtc->fb->bits_per_pixel) { - case 8: - dspcntr |= DISPPLANE_8BPP; - break; - case 16: - if (crtc->fb->depth == 15) - dspcntr |= DISPPLANE_15_16BPP; - else - dspcntr |= DISPPLANE_16BPP; - break; - case 24: - case 32: - dspcntr |= DISPPLANE_32BPP_NO_ALPHA; - break; - default: - dev_err(dev->dev, "Unknown color depth\n"); - ret = -EINVAL; - goto psb_intel_pipe_set_base_exit; - } - REG_WRITE(dspcntr_reg, dspcntr); - - dev_dbg(dev->dev, "Writing base %08lX %08lX %d %d\n", - start, offset, x, y); - - REG_WRITE(dsplinoff, offset); - REG_READ(dsplinoff); - REG_WRITE(dspsurf, start); - REG_READ(dspsurf); - -psb_intel_pipe_cleaner: - /* If there was a previous display we can now unpin it */ - if (old_fb) - psb_gtt_unpin(to_psb_fb(old_fb)->gtt); - -psb_intel_pipe_set_base_exit: - gma_power_end(dev); - return ret; -} - -/** - * Disable the pipe, plane and pll. - * - */ -void mdfld_disable_crtc (struct drm_device *dev, int pipe) -{ - int dpll_reg = MRST_DPLL_A; - int dspcntr_reg = DSPACNTR; - int dspbase_reg = MRST_DSPABASE; - int pipeconf_reg = PIPEACONF; - u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG; - u32 temp; - - switch (pipe) { - case 0: - break; - case 1: - dpll_reg = MDFLD_DPLL_B; - dspcntr_reg = DSPBCNTR; - dspbase_reg = DSPBSURF; - pipeconf_reg = PIPEBCONF; - break; - case 2: - dpll_reg = MRST_DPLL_A; - dspcntr_reg = DSPCCNTR; - dspbase_reg = MDFLD_DSPCBASE; - pipeconf_reg = PIPECCONF; - gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET; - break; - default: - dev_err(dev->dev, "Illegal Pipe Number. \n"); - return; - } - - if (pipe != 1) - mdfld_dsi_gen_fifo_ready (dev, gen_fifo_stat_reg, HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY); - - /* Disable display plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(dspcntr_reg, - temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - REG_READ(dspbase_reg); - } - - /* FIXME_JLIU7 MDFLD_PO revisit */ - /* Wait for vblank for the disable to take effect */ -/* MDFLD_PO_JLIU7 psb_intel_wait_for_vblank(dev); */ - - /* Next, disable display pipes */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - temp &= ~PIPEACONF_ENABLE; - temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF; - REG_WRITE(pipeconf_reg, temp); - REG_READ(pipeconf_reg); - - /* Wait for for the pipe disable to take effect. */ - mdfldWaitForPipeDisable(dev, pipe); - } - - temp = REG_READ(dpll_reg); - if (temp & DPLL_VCO_ENABLE) { - if (((pipe != 1) && !((REG_READ(PIPEACONF) | REG_READ(PIPECCONF)) & PIPEACONF_ENABLE)) - || (pipe == 1)){ - temp &= ~(DPLL_VCO_ENABLE); - REG_WRITE(dpll_reg, temp); - REG_READ(dpll_reg); - /* Wait for the clocks to turn off. */ - /* FIXME_MDFLD PO may need more delay */ - udelay(500); - - if (!(temp & MDFLD_PWR_GATE_EN)) { - /* gating power of DPLL */ - REG_WRITE(dpll_reg, temp | MDFLD_PWR_GATE_EN); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(5000); - } - } - } - -} - -/** - * Sets the power management mode of the pipe and plane. - * - * This code should probably grow support for turning the cursor off and back - * on appropriately at the same time as we're turning the pipe off/on. - */ -static void mdfld_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - struct drm_device *dev = crtc->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - int dpll_reg = MRST_DPLL_A; - int dspcntr_reg = DSPACNTR; - int dspbase_reg = MRST_DSPABASE; - int pipeconf_reg = PIPEACONF; - u32 pipestat_reg = PIPEASTAT; - u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG; - u32 pipeconf = dev_priv->pipeconf; - u32 dspcntr = dev_priv->dspcntr; - u32 mipi_enable_reg = MIPIA_DEVICE_READY_REG; - u32 temp; - bool enabled; - int timeout = 0; - - if (!gma_power_begin(dev, true)) - return; - - /* Ignore if system is already in DSR and in suspended state. */ - if(/*gbgfxsuspended */0 && dev_priv->dispstatus == false && mode == 3){ - if(dev_priv->rpm_enabled && pipe == 1){ - // dev_priv->is_mipi_on = false; - pm_request_idle(&dev->pdev->dev); - } - return; - }else if(mode == 0) { - //do not need to set gbdispstatus=true in crtc. - //this will be set in encoder such as mdfld_dsi_dbi_dpms - //gbdispstatus = true; - } - -/* FIXME_JLIU7 MDFLD_PO replaced w/ the following function */ -/* mdfld_dbi_dpms (struct drm_device *dev, int pipe, bool enabled) */ - - switch (pipe) { - case 0: - break; - case 1: - dpll_reg = DPLL_B; - dspcntr_reg = DSPBCNTR; - dspbase_reg = MRST_DSPBBASE; - pipeconf_reg = PIPEBCONF; - pipeconf = dev_priv->pipeconf1; - dspcntr = dev_priv->dspcntr1; - dpll_reg = MDFLD_DPLL_B; - break; - case 2: - dpll_reg = MRST_DPLL_A; - dspcntr_reg = DSPCCNTR; - dspbase_reg = MDFLD_DSPCBASE; - pipeconf_reg = PIPECCONF; - pipestat_reg = PIPECSTAT; - pipeconf = dev_priv->pipeconf2; - dspcntr = dev_priv->dspcntr2; - gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET; - mipi_enable_reg = MIPIA_DEVICE_READY_REG + MIPIC_REG_OFFSET; - break; - default: - dev_err(dev->dev, "Illegal Pipe Number.\n"); - return; - } - - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - /* Enable the DPLL */ - temp = REG_READ(dpll_reg); - - if ((temp & DPLL_VCO_ENABLE) == 0) { - /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */ - if (temp & MDFLD_PWR_GATE_EN) { - temp &= ~MDFLD_PWR_GATE_EN; - REG_WRITE(dpll_reg, temp); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - } - - REG_WRITE(dpll_reg, temp); - REG_READ(dpll_reg); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - - REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - - /** - * wait for DSI PLL to lock - * NOTE: only need to poll status of pipe 0 and pipe 1, - * since both MIPI pipes share the same PLL. - */ - while ((pipe != 2) && (timeout < 20000) && !(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) { - udelay(150); - timeout ++; - } - } - - /* Enable the plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - REG_WRITE(dspcntr_reg, - temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - } - - /* Enable the pipe */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) == 0) { - REG_WRITE(pipeconf_reg, pipeconf); - - /* Wait for for the pipe enable to take effect. */ - mdfldWaitForPipeEnable(dev, pipe); - } - - /*workaround for sighting 3741701 Random X blank display*/ - /*perform w/a in video mode only on pipe A or C*/ - if ((pipe == 0 || pipe == 2) && - (mdfld_panel_dpi(dev) == true)) { - REG_WRITE(pipestat_reg, REG_READ(pipestat_reg)); - msleep(100); - if(PIPE_VBLANK_STATUS & REG_READ(pipestat_reg)) { - printk(KERN_ALERT "OK"); - } else { - printk(KERN_ALERT "STUCK!!!!"); - /*shutdown controller*/ - temp = REG_READ(dspcntr_reg); - REG_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - /*mdfld_dsi_dpi_shut_down(dev, pipe);*/ - REG_WRITE(0xb048, 1); - msleep(100); - temp = REG_READ(pipeconf_reg); - temp &= ~PIPEACONF_ENABLE; - REG_WRITE(pipeconf_reg, temp); - msleep(100); /*wait for pipe disable*/ - /*printk(KERN_ALERT "70008 is %x\n", REG_READ(0x70008)); - printk(KERN_ALERT "b074 is %x\n", REG_READ(0xb074));*/ - REG_WRITE(mipi_enable_reg, 0); - msleep(100); - printk(KERN_ALERT "70008 is %x\n", REG_READ(0x70008)); - printk(KERN_ALERT "b074 is %x\n", REG_READ(0xb074)); - REG_WRITE(0xb004, REG_READ(0xb004)); - /* try to bring the controller back up again*/ - REG_WRITE(mipi_enable_reg, 1); - temp = REG_READ(dspcntr_reg); - REG_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - /*mdfld_dsi_dpi_turn_on(dev, pipe);*/ - REG_WRITE(0xb048, 2); - msleep(100); - temp = REG_READ(pipeconf_reg); - temp |= PIPEACONF_ENABLE; - REG_WRITE(pipeconf_reg, temp); - } - } - - psb_intel_crtc_load_lut(crtc); - - /* Give the overlay scaler a chance to enable - if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, true); TODO */ - - break; - case DRM_MODE_DPMS_OFF: - /* Give the overlay scaler a chance to disable - * if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ - if (pipe != 1) - mdfld_dsi_gen_fifo_ready (dev, gen_fifo_stat_reg, HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY); - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - - /* Disable display plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(dspcntr_reg, - temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - REG_READ(dspbase_reg); - } - - /* FIXME_JLIU7 MDFLD_PO revisit */ - /* Wait for vblank for the disable to take effect */ -// MDFLD_PO_JLIU7 psb_intel_wait_for_vblank(dev); - - /* Next, disable display pipes */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - temp &= ~PIPEACONF_ENABLE; - temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF; - REG_WRITE(pipeconf_reg, temp); -// REG_WRITE(pipeconf_reg, 0); - REG_READ(pipeconf_reg); - - /* Wait for for the pipe disable to take effect. */ - mdfldWaitForPipeDisable(dev, pipe); - } - - temp = REG_READ(dpll_reg); - if (temp & DPLL_VCO_ENABLE) { - if (((pipe != 1) && !((REG_READ(PIPEACONF) | REG_READ(PIPECCONF)) & PIPEACONF_ENABLE)) - || (pipe == 1)){ - temp &= ~(DPLL_VCO_ENABLE); - REG_WRITE(dpll_reg, temp); - REG_READ(dpll_reg); - /* Wait for the clocks to turn off. */ - /* FIXME_MDFLD PO may need more delay */ - udelay(500); -#if 0 /* MDFLD_PO_JLIU7 */ - if (!(temp & MDFLD_PWR_GATE_EN)) { - /* gating power of DPLL */ - REG_WRITE(dpll_reg, temp | MDFLD_PWR_GATE_EN); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(5000); - } -#endif /* MDFLD_PO_JLIU7 */ - } - } - break; - } - - enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; - -#if 0 /* JB: Add vblank support later */ - if (enabled) - dev_priv->vblank_pipe |= (1 << pipe); - else - dev_priv->vblank_pipe &= ~(1 << pipe); -#endif - - gma_power_end(dev); -} - - -#define MDFLD_LIMT_DPLL_19 0 -#define MDFLD_LIMT_DPLL_25 1 -#define MDFLD_LIMT_DPLL_83 2 -#define MDFLD_LIMT_DPLL_100 3 -#define MDFLD_LIMT_DSIPLL_19 4 -#define MDFLD_LIMT_DSIPLL_25 5 -#define MDFLD_LIMT_DSIPLL_83 6 -#define MDFLD_LIMT_DSIPLL_100 7 - -#define MDFLD_DOT_MIN 19750 /* FIXME_MDFLD JLIU7 need to find out min & max for MDFLD */ -#define MDFLD_DOT_MAX 120000 -#define MDFLD_DPLL_M_MIN_19 113 -#define MDFLD_DPLL_M_MAX_19 155 -#define MDFLD_DPLL_P1_MIN_19 2 -#define MDFLD_DPLL_P1_MAX_19 10 -#define MDFLD_DPLL_M_MIN_25 101 -#define MDFLD_DPLL_M_MAX_25 130 -#define MDFLD_DPLL_P1_MIN_25 2 -#define MDFLD_DPLL_P1_MAX_25 10 -#define MDFLD_DPLL_M_MIN_83 64 -#define MDFLD_DPLL_M_MAX_83 64 -#define MDFLD_DPLL_P1_MIN_83 2 -#define MDFLD_DPLL_P1_MAX_83 2 -#define MDFLD_DPLL_M_MIN_100 64 -#define MDFLD_DPLL_M_MAX_100 64 -#define MDFLD_DPLL_P1_MIN_100 2 -#define MDFLD_DPLL_P1_MAX_100 2 -#define MDFLD_DSIPLL_M_MIN_19 131 -#define MDFLD_DSIPLL_M_MAX_19 175 -#define MDFLD_DSIPLL_P1_MIN_19 3 -#define MDFLD_DSIPLL_P1_MAX_19 8 -#define MDFLD_DSIPLL_M_MIN_25 97 -#define MDFLD_DSIPLL_M_MAX_25 140 -#define MDFLD_DSIPLL_P1_MIN_25 3 -#define MDFLD_DSIPLL_P1_MAX_25 9 -#define MDFLD_DSIPLL_M_MIN_83 33 -#define MDFLD_DSIPLL_M_MAX_83 92 -#define MDFLD_DSIPLL_P1_MIN_83 2 -#define MDFLD_DSIPLL_P1_MAX_83 3 -#define MDFLD_DSIPLL_M_MIN_100 97 -#define MDFLD_DSIPLL_M_MAX_100 140 -#define MDFLD_DSIPLL_P1_MIN_100 3 -#define MDFLD_DSIPLL_P1_MAX_100 9 - -static const struct mdfld_limit_t mdfld_limits[] = { - { /* MDFLD_LIMT_DPLL_19 */ - .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX}, - .m = {.min = MDFLD_DPLL_M_MIN_19, .max = MDFLD_DPLL_M_MAX_19}, - .p1 = {.min = MDFLD_DPLL_P1_MIN_19, .max = MDFLD_DPLL_P1_MAX_19}, - }, - { /* MDFLD_LIMT_DPLL_25 */ - .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX}, - .m = {.min = MDFLD_DPLL_M_MIN_25, .max = MDFLD_DPLL_M_MAX_25}, - .p1 = {.min = MDFLD_DPLL_P1_MIN_25, .max = MDFLD_DPLL_P1_MAX_25}, - }, - { /* MDFLD_LIMT_DPLL_83 */ - .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX}, - .m = {.min = MDFLD_DPLL_M_MIN_83, .max = MDFLD_DPLL_M_MAX_83}, - .p1 = {.min = MDFLD_DPLL_P1_MIN_83, .max = MDFLD_DPLL_P1_MAX_83}, - }, - { /* MDFLD_LIMT_DPLL_100 */ - .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX}, - .m = {.min = MDFLD_DPLL_M_MIN_100, .max = MDFLD_DPLL_M_MAX_100}, - .p1 = {.min = MDFLD_DPLL_P1_MIN_100, .max = MDFLD_DPLL_P1_MAX_100}, - }, - { /* MDFLD_LIMT_DSIPLL_19 */ - .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX}, - .m = {.min = MDFLD_DSIPLL_M_MIN_19, .max = MDFLD_DSIPLL_M_MAX_19}, - .p1 = {.min = MDFLD_DSIPLL_P1_MIN_19, .max = MDFLD_DSIPLL_P1_MAX_19}, - }, - { /* MDFLD_LIMT_DSIPLL_25 */ - .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX}, - .m = {.min = MDFLD_DSIPLL_M_MIN_25, .max = MDFLD_DSIPLL_M_MAX_25}, - .p1 = {.min = MDFLD_DSIPLL_P1_MIN_25, .max = MDFLD_DSIPLL_P1_MAX_25}, - }, - { /* MDFLD_LIMT_DSIPLL_83 */ - .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX}, - .m = {.min = MDFLD_DSIPLL_M_MIN_83, .max = MDFLD_DSIPLL_M_MAX_83}, - .p1 = {.min = MDFLD_DSIPLL_P1_MIN_83, .max = MDFLD_DSIPLL_P1_MAX_83}, - }, - { /* MDFLD_LIMT_DSIPLL_100 */ - .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX}, - .m = {.min = MDFLD_DSIPLL_M_MIN_100, .max = MDFLD_DSIPLL_M_MAX_100}, - .p1 = {.min = MDFLD_DSIPLL_P1_MIN_100, .max = MDFLD_DSIPLL_P1_MAX_100}, - }, -}; - -#define MDFLD_M_MIN 21 -#define MDFLD_M_MAX 180 -static const u32 mdfld_m_converts[] = { -/* M configuration table from 9-bit LFSR table */ - 224, 368, 440, 220, 366, 439, 219, 365, 182, 347, /* 21 - 30 */ - 173, 342, 171, 85, 298, 149, 74, 37, 18, 265, /* 31 - 40 */ - 388, 194, 353, 432, 216, 108, 310, 155, 333, 166, /* 41 - 50 */ - 83, 41, 276, 138, 325, 162, 337, 168, 340, 170, /* 51 - 60 */ - 341, 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 61 - 70 */ - 461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */ - 106, 53, 282, 397, 354, 227, 113, 56, 284, 142, /* 81 - 90 */ - 71, 35, 273, 136, 324, 418, 465, 488, 500, 506, /* 91 - 100 */ - 253, 126, 63, 287, 399, 455, 483, 241, 376, 444, /* 101 - 110 */ - 478, 495, 503, 251, 381, 446, 479, 239, 375, 443, /* 111 - 120 */ - 477, 238, 119, 315, 157, 78, 295, 147, 329, 420, /* 121 - 130 */ - 210, 105, 308, 154, 77, 38, 275, 137, 68, 290, /* 131 - 140 */ - 145, 328, 164, 82, 297, 404, 458, 485, 498, 249, /* 141 - 150 */ - 380, 190, 351, 431, 471, 235, 117, 314, 413, 206, /* 151 - 160 */ - 103, 51, 25, 12, 262, 387, 193, 96, 48, 280, /* 161 - 170 */ - 396, 198, 99, 305, 152, 76, 294, 403, 457, 228, /* 171 - 180 */ -}; - -static const struct mdfld_limit_t *mdfld_limit(struct drm_crtc *crtc) -{ - const struct mdfld_limit_t *limit = NULL; - struct drm_device *dev = crtc->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI) - || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI2)) { - if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19)) - limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_19]; - else if (ksel == KSEL_BYPASS_25) - limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_25]; - else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166)) - limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_83]; - else if ((ksel == KSEL_BYPASS_83_100) && - (dev_priv->core_freq == 100 || dev_priv->core_freq == 200)) - limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_100]; - } else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) { - if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19)) - limit = &mdfld_limits[MDFLD_LIMT_DPLL_19]; - else if (ksel == KSEL_BYPASS_25) - limit = &mdfld_limits[MDFLD_LIMT_DPLL_25]; - else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166)) - limit = &mdfld_limits[MDFLD_LIMT_DPLL_83]; - else if ((ksel == KSEL_BYPASS_83_100) && - (dev_priv->core_freq == 100 || dev_priv->core_freq == 200)) - limit = &mdfld_limits[MDFLD_LIMT_DPLL_100]; - } else { - limit = NULL; - dev_err(dev->dev, "mdfld_limit Wrong display type.\n"); - } - - return limit; -} - -/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ -static void mdfld_clock(int refclk, struct mdfld_intel_clock_t *clock) -{ - clock->dot = (refclk * clock->m) / clock->p1; -} - -/** - * Returns a set of divisors for the desired target clock with the given refclk, - * or FALSE. Divisor values are the actual divisors for - */ -static bool -mdfldFindBestPLL(struct drm_crtc *crtc, int target, int refclk, - struct mdfld_intel_clock_t *best_clock) -{ - struct mdfld_intel_clock_t clock; - const struct mdfld_limit_t *limit = mdfld_limit(crtc); - int err = target; - - memset(best_clock, 0, sizeof(*best_clock)); - - for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) { - for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; - clock.p1++) { - int this_err; - - mdfld_clock(refclk, &clock); - - this_err = abs(clock.dot - target); - if (this_err < err) { - *best_clock = clock; - err = this_err; - } - } - } - return err != target; -} - -/** - * Return the pipe currently connected to the panel fitter, - * or -1 if the panel fitter is not present or not in use - */ -static int mdfld_panel_fitter_pipe(struct drm_device *dev) -{ - u32 pfit_control; - - pfit_control = REG_READ(PFIT_CONTROL); - - /* See if the panel fitter is in use */ - if ((pfit_control & PFIT_ENABLE) == 0) - return -1; - return (pfit_control >> 29) & 3; -} - -static int mdfld_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct drm_psb_private *dev_priv = dev->dev_private; - int pipe = psb_intel_crtc->pipe; - int fp_reg = MRST_FPA0; - int dpll_reg = MRST_DPLL_A; - int dspcntr_reg = DSPACNTR; - int pipeconf_reg = PIPEACONF; - int htot_reg = HTOTAL_A; - int hblank_reg = HBLANK_A; - int hsync_reg = HSYNC_A; - int vtot_reg = VTOTAL_A; - int vblank_reg = VBLANK_A; - int vsync_reg = VSYNC_A; - int dspsize_reg = DSPASIZE; - int dsppos_reg = DSPAPOS; - int pipesrc_reg = PIPEASRC; - u32 *pipeconf = &dev_priv->pipeconf; - u32 *dspcntr = &dev_priv->dspcntr; - int refclk = 0; - int clk_n = 0, clk_p2 = 0, clk_byte = 1, clk = 0, m_conv = 0, clk_tmp = 0; - struct mdfld_intel_clock_t clock; - bool ok; - u32 dpll = 0, fp = 0; - bool is_crt = false, is_lvds = false, is_tv = false; - bool is_mipi = false, is_mipi2 = false, is_hdmi = false; - struct drm_mode_config *mode_config = &dev->mode_config; - struct psb_intel_output *psb_intel_output = NULL; - uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN; - struct drm_encoder *encoder; - struct drm_connector *connector; - int timeout = 0; - - dev_dbg(dev->dev, "pipe = 0x%x \n", pipe); - - switch (pipe) { - case 0: - break; - case 1: - fp_reg = FPB0; - dpll_reg = DPLL_B; - dspcntr_reg = DSPBCNTR; - pipeconf_reg = PIPEBCONF; - htot_reg = HTOTAL_B; - hblank_reg = HBLANK_B; - hsync_reg = HSYNC_B; - vtot_reg = VTOTAL_B; - vblank_reg = VBLANK_B; - vsync_reg = VSYNC_B; - dspsize_reg = DSPBSIZE; - dsppos_reg = DSPBPOS; - pipesrc_reg = PIPEBSRC; - pipeconf = &dev_priv->pipeconf1; - dspcntr = &dev_priv->dspcntr1; - fp_reg = MDFLD_DPLL_DIV0; - dpll_reg = MDFLD_DPLL_B; - break; - case 2: - dpll_reg = MRST_DPLL_A; - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - htot_reg = HTOTAL_C; - hblank_reg = HBLANK_C; - hsync_reg = HSYNC_C; - vtot_reg = VTOTAL_C; - vblank_reg = VBLANK_C; - vsync_reg = VSYNC_C; - dspsize_reg = DSPCSIZE; - dsppos_reg = DSPCPOS; - pipesrc_reg = PIPECSRC; - pipeconf = &dev_priv->pipeconf2; - dspcntr = &dev_priv->dspcntr2; - break; - default: - DRM_ERROR("Illegal Pipe Number. \n"); - return 0; - } - - dev_dbg(dev->dev, "adjusted_hdisplay = %d\n", - adjusted_mode->hdisplay); - dev_dbg(dev->dev, "adjusted_vdisplay = %d\n", - adjusted_mode->vdisplay); - dev_dbg(dev->dev, "adjusted_hsync_start = %d\n", - adjusted_mode->hsync_start); - dev_dbg(dev->dev, "adjusted_hsync_end = %d\n", - adjusted_mode->hsync_end); - dev_dbg(dev->dev, "adjusted_htotal = %d\n", - adjusted_mode->htotal); - dev_dbg(dev->dev, "adjusted_vsync_start = %d\n", - adjusted_mode->vsync_start); - dev_dbg(dev->dev, "adjusted_vsync_end = %d\n", - adjusted_mode->vsync_end); - dev_dbg(dev->dev, "adjusted_vtotal = %d\n", - adjusted_mode->vtotal); - dev_dbg(dev->dev, "adjusted_clock = %d\n", - adjusted_mode->clock); - dev_dbg(dev->dev, "hdisplay = %d\n", - mode->hdisplay); - dev_dbg(dev->dev, "vdisplay = %d\n", - mode->vdisplay); - - if (!gma_power_begin(dev, true)) - return 0; - - memcpy(&psb_intel_crtc->saved_mode, mode, sizeof(struct drm_display_mode)); - memcpy(&psb_intel_crtc->saved_adjusted_mode, adjusted_mode, sizeof(struct drm_display_mode)); - - list_for_each_entry(connector, &mode_config->connector_list, head) { - - encoder = connector->encoder; - - if(!encoder) - continue; - - if (encoder->crtc != crtc) - continue; - - psb_intel_output = to_psb_intel_output(connector); - - dev_dbg(dev->dev, "output->type = 0x%x \n", psb_intel_output->type); - - switch (psb_intel_output->type) { - case INTEL_OUTPUT_LVDS: - is_lvds = true; - break; - case INTEL_OUTPUT_TVOUT: - is_tv = true; - break; - case INTEL_OUTPUT_ANALOG: - is_crt = true; - break; - case INTEL_OUTPUT_MIPI: - is_mipi = true; - break; - case INTEL_OUTPUT_MIPI2: - is_mipi2 = true; - break; - case INTEL_OUTPUT_HDMI: - is_hdmi = true; - break; - } - } - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - - /* Disable the panel fitter if it was on our pipe */ - if (mdfld_panel_fitter_pipe(dev) == pipe) - REG_WRITE(PFIT_CONTROL, 0); - - /* pipesrc and dspsize control the size that is scaled from, - * which should always be the user's requested size. - */ - if (pipe == 1) { - /* FIXME: To make HDMI display with 864x480 (TPO), 480x864 (PYR) or 480x854 (TMD), set the sprite - * width/height and souce image size registers with the adjusted mode for pipe B. */ - - /* The defined sprite rectangle must always be completely contained within the displayable - * area of the screen image (frame buffer). */ - REG_WRITE(dspsize_reg, ((MIN(mode->crtc_vdisplay, adjusted_mode->crtc_vdisplay) - 1) << 16) - | (MIN(mode->crtc_hdisplay, adjusted_mode->crtc_hdisplay) - 1)); - /* Set the CRTC with encoder mode. */ - REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16) - | (mode->crtc_vdisplay - 1)); - } else { - REG_WRITE(dspsize_reg, ((mode->crtc_vdisplay - 1) << 16) | (mode->crtc_hdisplay - 1)); - REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); - } - - REG_WRITE(dsppos_reg, 0); - - if (psb_intel_output) - drm_connector_property_get_value(&psb_intel_output->base, - dev->mode_config.scaling_mode_property, &scalingType); - - if (scalingType == DRM_MODE_SCALE_NO_SCALE) { - /* - * Medfield doesn't have register support for centering so - * we need to mess with the h/vblank and h/vsync start and - * ends to get central - */ - int offsetX = 0, offsetY = 0; - - offsetX = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2; - offsetY = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2; - - REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) | - ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - offsetX - 1) | - ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16)); - REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - offsetX - 1) | - ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16)); - REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - offsetY - 1) | - ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16)); - REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - offsetY - 1) | - ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16)); - } else { - REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | - ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | - ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | - ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | - ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | - ((adjusted_mode->crtc_vsync_end - 1) << 16)); - } - - /* Flush the plane changes */ - { - struct drm_crtc_helper_funcs *crtc_funcs = - crtc->helper_private; - crtc_funcs->mode_set_base(crtc, x, y, old_fb); - } - - /* setup pipeconf */ - *pipeconf = PIPEACONF_ENABLE; /* FIXME_JLIU7 REG_READ(pipeconf_reg); */ - - /* Set up the display plane register */ - *dspcntr = REG_READ(dspcntr_reg); - *dspcntr |= pipe << DISPPLANE_SEL_PIPE_POS; - *dspcntr |= DISPLAY_PLANE_ENABLE; -/* MDFLD_PO_JLIU7 dspcntr |= DISPPLANE_BOTTOM; */ -/* MDFLD_PO_JLIU7 dspcntr |= DISPPLANE_GAMMA_ENABLE; */ - - if (is_mipi2) - { - goto mrst_crtc_mode_set_exit; - } -/* FIXME JLIU7 Add MDFLD HDMI supports */ -/* FIXME_MDFLD JLIU7 DSIPLL clock *= 8? */ -/* FIXME_MDFLD JLIU7 need to revist for dual MIPI supports */ - clk = adjusted_mode->clock; - - if (is_hdmi) { - if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19)) - { - refclk = 19200; - - if (is_mipi || is_mipi2) - { - clk_n = 1, clk_p2 = 8; - } else if (is_hdmi) { - clk_n = 1, clk_p2 = 10; - } - } else if (ksel == KSEL_BYPASS_25) { - refclk = 25000; - - if (is_mipi || is_mipi2) - { - clk_n = 1, clk_p2 = 8; - } else if (is_hdmi) { - clk_n = 1, clk_p2 = 10; - } - } else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166)) { - refclk = 83000; - - if (is_mipi || is_mipi2) - { - clk_n = 4, clk_p2 = 8; - } else if (is_hdmi) { - clk_n = 4, clk_p2 = 10; - } - } else if ((ksel == KSEL_BYPASS_83_100) && - (dev_priv->core_freq == 100 || dev_priv->core_freq == 200)) { - refclk = 100000; - if (is_mipi || is_mipi2) - { - clk_n = 4, clk_p2 = 8; - } else if (is_hdmi) { - clk_n = 4, clk_p2 = 10; - } - } - - if (is_mipi) - clk_byte = dev_priv->bpp / 8; - else if (is_mipi2) - clk_byte = dev_priv->bpp2 / 8; - - clk_tmp = clk * clk_n * clk_p2 * clk_byte; - - dev_dbg(dev->dev, "clk = %d, clk_n = %d, clk_p2 = %d. \n", clk, clk_n, clk_p2); - dev_dbg(dev->dev, "adjusted_mode->clock = %d, clk_tmp = %d. \n", adjusted_mode->clock, clk_tmp); - - ok = mdfldFindBestPLL(crtc, clk_tmp, refclk, &clock); - - if (!ok) { - dev_err(dev->dev, - "mdfldFindBestPLL fail in mdfld_crtc_mode_set. \n"); - } else { - m_conv = mdfld_m_converts[(clock.m - MDFLD_M_MIN)]; - - dev_dbg(dev->dev, "dot clock = %d," - "m = %d, p1 = %d, m_conv = %d. \n", clock.dot, clock.m, - clock.p1, m_conv); - } - - dpll = REG_READ(dpll_reg); - - if (dpll & DPLL_VCO_ENABLE) { - dpll &= ~DPLL_VCO_ENABLE; - REG_WRITE(dpll_reg, dpll); - REG_READ(dpll_reg); - - /* FIXME jliu7 check the DPLL lock bit PIPEACONF[29] */ - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - - /* reset M1, N1 & P1 */ - REG_WRITE(fp_reg, 0); - dpll &= ~MDFLD_P1_MASK; - REG_WRITE(dpll_reg, dpll); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - } - - /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */ - if (dpll & MDFLD_PWR_GATE_EN) { - dpll &= ~MDFLD_PWR_GATE_EN; - REG_WRITE(dpll_reg, dpll); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - } - - dpll = 0; - -#if 0 /* FIXME revisit later */ - if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19) || (ksel == KSEL_BYPASS_25)) { - dpll &= ~MDFLD_INPUT_REF_SEL; - } else if (ksel == KSEL_BYPASS_83_100) { - dpll |= MDFLD_INPUT_REF_SEL; - } -#endif /* FIXME revisit later */ - - if (is_hdmi) - dpll |= MDFLD_VCO_SEL; - - fp = (clk_n / 2) << 16; - fp |= m_conv; - - /* compute bitmask from p1 value */ - dpll |= (1 << (clock.p1 - 2)) << 17; - -#if 0 /* 1080p30 & 720p */ - dpll = 0x00050000; - fp = 0x000001be; -#endif -#if 0 /* 480p */ - dpll = 0x02010000; - fp = 0x000000d2; -#endif - } else { -#if 0 /*DBI_TPO_480x864*/ - dpll = 0x00020000; - fp = 0x00000156; -#endif /* DBI_TPO_480x864 */ /* get from spec. */ - - dpll = 0x00800000; - fp = 0x000000c1; -} - - REG_WRITE(fp_reg, fp); - REG_WRITE(dpll_reg, dpll); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - - dpll |= DPLL_VCO_ENABLE; - REG_WRITE(dpll_reg, dpll); - REG_READ(dpll_reg); - - /* wait for DSI PLL to lock */ - while ((timeout < 20000) && !(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) { - udelay(150); - timeout ++; - } - - if (is_mipi) - goto mrst_crtc_mode_set_exit; - - dev_dbg(dev->dev, "is_mipi = 0x%x \n", is_mipi); - - REG_WRITE(pipeconf_reg, *pipeconf); - REG_READ(pipeconf_reg); - - /* Wait for for the pipe enable to take effect. */ -//FIXME_JLIU7 HDMI mrstWaitForPipeEnable(dev); - - REG_WRITE(dspcntr_reg, *dspcntr); - psb_intel_wait_for_vblank(dev); - -mrst_crtc_mode_set_exit: - - gma_power_end(dev); - - return 0; -} - -static void mdfld_crtc_prepare(struct drm_crtc *crtc) -{ - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); -} - -static void mdfld_crtc_commit(struct drm_crtc *crtc) -{ - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); -} - -static bool mdfld_crtc_mode_fixup(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - return true; -} - -const struct drm_crtc_helper_funcs mdfld_helper_funcs = { - .dpms = mdfld_crtc_dpms, - .mode_fixup = mdfld_crtc_mode_fixup, - .mode_set = mdfld_crtc_mode_set, - .mode_set_base = mdfld__intel_pipe_set_base, - .prepare = mdfld_crtc_prepare, - .commit = mdfld_crtc_commit, -}; diff --git a/drivers/staging/gma500/mdfld_msic.h b/drivers/staging/gma500/mdfld_msic.h deleted file mode 100644 index a7ad65472491..000000000000 --- a/drivers/staging/gma500/mdfld_msic.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Jim Liu - */ - -#define MSIC_PCI_DEVICE_ID 0x831 - -int msic_regsiter_driver(void); -int msic_unregister_driver(void); -extern void hpd_notify_um(void); diff --git a/drivers/staging/gma500/mdfld_output.c b/drivers/staging/gma500/mdfld_output.c deleted file mode 100644 index eabf53d58f92..000000000000 --- a/drivers/staging/gma500/mdfld_output.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe -*/ - -#include -#include -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" -#include "mdfld_dsi_dbi_dpu.h" - -#include "displays/tpo_cmd.h" -#include "displays/tpo_vid.h" -#include "displays/tmd_cmd.h" -#include "displays/tmd_vid.h" -#include "displays/pyr_cmd.h" -#include "displays/pyr_vid.h" -/* #include "displays/hdmi.h" */ - -static int mdfld_dual_mipi; -static int mdfld_hdmi; -static int mdfld_dpu; - -module_param(mdfld_dual_mipi, int, 0600); -MODULE_PARM_DESC(mdfld_dual_mipi, "Enable dual MIPI configuration"); -module_param(mdfld_hdmi, int, 0600); -MODULE_PARM_DESC(mdfld_hdmi, "Enable Medfield HDMI"); -module_param(mdfld_dpu, int, 0600); -MODULE_PARM_DESC(mdfld_dpu, "Enable Medfield DPU"); - -/* For now a single type per device is all we cope with */ -int mdfld_get_panel_type(struct drm_device *dev, int pipe) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - return dev_priv->panel_id; -} - -int mdfld_panel_dpi(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - switch (dev_priv->panel_id) { - case TMD_VID: - case TPO_VID: - case PYR_VID: - return true; - case TMD_CMD: - case TPO_CMD: - case PYR_CMD: - default: - return false; - } -} - -static int init_panel(struct drm_device *dev, int mipi_pipe, int p_type) -{ - struct panel_funcs *p_cmd_funcs; - struct panel_funcs *p_vid_funcs; - - /* Oh boy ... FIXME */ - p_cmd_funcs = kzalloc(sizeof(struct panel_funcs), GFP_KERNEL); - if (p_cmd_funcs == NULL) - return -ENODEV; - p_vid_funcs = kzalloc(sizeof(struct panel_funcs), GFP_KERNEL); - if (p_vid_funcs == NULL) { - kfree(p_cmd_funcs); - return -ENODEV; - } - - switch (p_type) { - case TPO_CMD: - tpo_cmd_init(dev, p_cmd_funcs); - mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, NULL); - break; - case TPO_VID: - tpo_vid_init(dev, p_vid_funcs); - mdfld_dsi_output_init(dev, mipi_pipe, NULL, NULL, p_vid_funcs); - break; - case TMD_CMD: - /*tmd_cmd_init(dev, p_cmd_funcs); */ - mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, NULL); - break; - case TMD_VID: - tmd_vid_init(dev, p_vid_funcs); - mdfld_dsi_output_init(dev, mipi_pipe, NULL, NULL, p_vid_funcs); - break; - case PYR_CMD: - pyr_cmd_init(dev, p_cmd_funcs); - mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, NULL); - break; - case PYR_VID: - mdfld_dsi_output_init(dev, mipi_pipe, NULL, NULL, p_vid_funcs); - break; - case TPO: /* TPO panel supports both cmd & vid interfaces */ - tpo_cmd_init(dev, p_cmd_funcs); - tpo_vid_init(dev, p_vid_funcs); - mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, - p_vid_funcs); - break; - case TMD: - break; - case PYR: - break; -#if 0 - case HDMI: - dev_dbg(dev->dev, "Initializing HDMI"); - mdfld_hdmi_init(dev, &dev_priv->mode_dev); - break; -#endif - default: - dev_err(dev->dev, "Unsupported interface %d", p_type); - return -ENODEV; - } - return 0; -} - -int mdfld_output_init(struct drm_device *dev) -{ - int type; - - /* MIPI panel 1 */ - type = mdfld_get_panel_type(dev, 0); - dev_info(dev->dev, "panel 1: type is %d\n", type); - init_panel(dev, 0, type); - - if (mdfld_dual_mipi) { - /* MIPI panel 2 */ - type = mdfld_get_panel_type(dev, 2); - dev_info(dev->dev, "panel 2: type is %d\n", type); - init_panel(dev, 2, type); - } - if (mdfld_hdmi) - /* HDMI panel */ - init_panel(dev, 0, HDMI); - return 0; -} - -void mdfld_output_setup(struct drm_device *dev) -{ - /* FIXME: this is not the right place for this stuff ! */ - if (IS_MFLD(dev)) { - if (mdfld_dpu) - mdfld_dbi_dpu_init(dev); - else - mdfld_dbi_dsr_init(dev); - } -} diff --git a/drivers/staging/gma500/mdfld_output.h b/drivers/staging/gma500/mdfld_output.h deleted file mode 100644 index daf33e7df9d5..000000000000 --- a/drivers/staging/gma500/mdfld_output.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe -*/ - -#ifndef MDFLD_OUTPUT_H -#define MDFLD_OUTPUT_H - -int mdfld_output_init(struct drm_device *dev); -int mdfld_panel_dpi(struct drm_device *dev); -int mdfld_get_panel_type(struct drm_device *dev, int pipe); -void mdfld_disable_crtc (struct drm_device *dev, int pipe); - -extern const struct drm_crtc_helper_funcs mdfld_helper_funcs; -extern const struct drm_crtc_funcs mdfld_intel_crtc_funcs; - -extern void mdfld_output_setup(struct drm_device *dev); - -#endif diff --git a/drivers/staging/gma500/mdfld_pyr_cmd.c b/drivers/staging/gma500/mdfld_pyr_cmd.c deleted file mode 100644 index 523f2d8fe4f1..000000000000 --- a/drivers/staging/gma500/mdfld_pyr_cmd.c +++ /dev/null @@ -1,558 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe -*/ - -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" -#include "mdfld_dsi_dbi_dpu.h" -#include "mdfld_dsi_pkg_sender.h" - -#include "displays/pyr_cmd.h" - -static struct drm_display_mode *pyr_cmd_get_config_mode(struct drm_device *dev) -{ - struct drm_display_mode *mode; - - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) { - dev_err(dev->dev, "Out of memory\n"); - return NULL; - } - - dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay); - dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay); - dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start); - dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end); - dev_dbg(dev->dev, "htotal is %d\n", mode->htotal); - dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start); - dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end); - dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal); - dev_dbg(dev->dev, "clock is %d\n", mode->clock); - - mode->hdisplay = 480; - mode->vdisplay = 864; - mode->hsync_start = 487; - mode->hsync_end = 490; - mode->htotal = 499; - mode->vsync_start = 874; - mode->vsync_end = 878; - mode->vtotal = 886; - mode->clock = 25777; - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - mode->type |= DRM_MODE_TYPE_PREFERRED; - - return mode; -} - -static bool pyr_dsi_dbi_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct drm_display_mode *fixed_mode = pyr_cmd_get_config_mode(dev); - - if (fixed_mode) { - adjusted_mode->hdisplay = fixed_mode->hdisplay; - adjusted_mode->hsync_start = fixed_mode->hsync_start; - adjusted_mode->hsync_end = fixed_mode->hsync_end; - adjusted_mode->htotal = fixed_mode->htotal; - adjusted_mode->vdisplay = fixed_mode->vdisplay; - adjusted_mode->vsync_start = fixed_mode->vsync_start; - adjusted_mode->vsync_end = fixed_mode->vsync_end; - adjusted_mode->vtotal = fixed_mode->vtotal; - adjusted_mode->clock = fixed_mode->clock; - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - kfree(fixed_mode); - } - return true; -} - -static void pyr_dsi_dbi_set_power(struct drm_encoder *encoder, bool on) -{ - int ret = 0; - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 reg_offset = 0; - int pipe = (dbi_output->channel_num == 0) ? 0 : 2; - - dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n", pipe, - on ? "On" : "Off", - dbi_output->dbi_panel_on ? "True" : "False"); - - if (pipe == 2) { - if (on) - dev_priv->dual_mipi = true; - else - dev_priv->dual_mipi = false; - - reg_offset = MIPIC_REG_OFFSET; - } else { - if (!on) - dev_priv->dual_mipi = false; - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - - if (on) { - if (dbi_output->dbi_panel_on) - goto out_err; - - ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_ON); - if (ret) { - dev_err(dev->dev, "power on error\n"); - goto out_err; - } - - dbi_output->dbi_panel_on = true; - - if (pipe == 2) { - dev_priv->dbi_panel_on2 = true; - } else { - dev_priv->dbi_panel_on = true; - mdfld_enable_te(dev, 0); - } - } else { - if (!dbi_output->dbi_panel_on && !dbi_output->first_boot) - goto out_err; - - dbi_output->dbi_panel_on = false; - dbi_output->first_boot = false; - - if (pipe == 2) { - dev_priv->dbi_panel_on2 = false; - mdfld_disable_te(dev, 2); - } else { - dev_priv->dbi_panel_on = false; - mdfld_disable_te(dev, 0); - - if (dev_priv->dbi_panel_on2) - mdfld_enable_te(dev, 2); - } - - ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_OFF); - if (ret) { - dev_err(dev->dev, "power on error\n"); - goto out_err; - } - } - -out_err: - gma_power_end(dev); - - if (ret) - dev_err(dev->dev, "failed\n"); -} - -static void pyr_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config, - int pipe) -{ - struct drm_device *dev = dsi_config->dev; - u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - int lane_count = dsi_config->lane_count; - u32 val = 0; - - dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe); - - /* Un-ready device */ - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); - - /* Init dsi adapter before kicking off */ - REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018); - - /* TODO: figure out how to setup these registers */ - REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c600F); - REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), - 0x000a0014); - REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400); - REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000); - - /* Enable all interrupts */ - REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff); - /* Max value: 20 clock cycles of txclkesc */ - REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f); - /* Min 21 txclkesc, max: ffffh */ - REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff); - /* Min: 7d0 max: 4e20 */ - REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0); - - /* Set up func_prg */ - val |= lane_count; - val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET); - val |= DSI_DBI_COLOR_FORMAT_OPTION2; - REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val); - - REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff); - REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff); - - /* De-assert dbi_stall when half of DBI FIFO is empty */ - /* REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000000); */ - - REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46); - REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000002); - REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004); - REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001); -} - -static void pyr_dsi_dbi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - int ret = 0; - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dsi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct mdfld_dsi_config *dsi_config = - mdfld_dsi_encoder_get_config(dsi_encoder); - struct mdfld_dsi_connector *dsi_connector = dsi_config->connector; - int pipe = dsi_connector->pipe; - u8 param = 0; - - /* Regs */ - u32 mipi_reg = MIPI; - u32 dspcntr_reg = DSPACNTR; - u32 pipeconf_reg = PIPEACONF; - u32 reg_offset = 0; - - /* Values */ - u32 dspcntr_val = dev_priv->dspcntr; - u32 pipeconf_val = dev_priv->pipeconf; - u32 h_active_area = mode->hdisplay; - u32 v_active_area = mode->vdisplay; - u32 mipi_val = (PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX | - TE_TRIGGER_GPIO_PIN); - - dev_dbg(dev->dev, "mipi_val =0x%x\n", mipi_val); - - dev_dbg(dev->dev, "type %s\n", (pipe == 2) ? "MIPI2" : "MIPI"); - dev_dbg(dev->dev, "h %d v %d\n", mode->hdisplay, mode->vdisplay); - - if (pipe == 2) { - mipi_reg = MIPI_C; - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - - reg_offset = MIPIC_REG_OFFSET; - - dspcntr_val = dev_priv->dspcntr2; - pipeconf_val = dev_priv->pipeconf2; - } else { - mipi_val |= 0x2; /* Two lanes for port A and C respectively */ - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - /* Set up pipe related registers */ - REG_WRITE(mipi_reg, mipi_val); - REG_READ(mipi_reg); - - pyr_dsi_controller_dbi_init(dsi_config, pipe); - - msleep(20); - - REG_WRITE(dspcntr_reg, dspcntr_val); - REG_READ(dspcntr_reg); - - /* 20ms delay before sending exit_sleep_mode */ - msleep(20); - - /* Send exit_sleep_mode DCS */ - ret = mdfld_dsi_dbi_send_dcs(dsi_output, exit_sleep_mode, NULL, - 0, CMD_DATA_SRC_SYSTEM_MEM); - if (ret) { - dev_err(dev->dev, "sent exit_sleep_mode faild\n"); - goto out_err; - } - - /*send set_tear_on DCS*/ - ret = mdfld_dsi_dbi_send_dcs(dsi_output, set_tear_on, - ¶m, 1, CMD_DATA_SRC_SYSTEM_MEM); - if (ret) { - dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__); - goto out_err; - } - - /* Do some init stuff */ - mdfld_dsi_brightness_init(dsi_config, pipe); - mdfld_dsi_gen_fifo_ready(dev, (MIPIA_GEN_FIFO_STAT_REG + reg_offset), - HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY); - - REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR); - REG_READ(pipeconf_reg); - - /* TODO: this looks ugly, try to move it to CRTC mode setting */ - if (pipe == 2) - dev_priv->pipeconf2 |= PIPEACONF_DSR; - else - dev_priv->pipeconf |= PIPEACONF_DSR; - - dev_dbg(dev->dev, "pipeconf %x\n", REG_READ(pipeconf_reg)); - - ret = mdfld_dsi_dbi_update_area(dsi_output, 0, 0, - h_active_area - 1, v_active_area - 1); - if (ret) { - dev_err(dev->dev, "update area failed\n"); - goto out_err; - } - -out_err: - gma_power_end(dev); - - if (ret) - dev_err(dev->dev, "mode set failed\n"); - else - dev_dbg(dev->dev, "mode set done successfully\n"); -} - -static void pyr_dsi_dbi_prepare(struct drm_encoder *encoder) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - - dbi_output->mode_flags |= MODE_SETTING_IN_ENCODER; - dbi_output->mode_flags &= ~MODE_SETTING_ENCODER_DONE; - - pyr_dsi_dbi_set_power(encoder, false); -} - -static void pyr_dsi_dbi_commit(struct drm_encoder *encoder) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_drm_dpu_rect rect; - - pyr_dsi_dbi_set_power(encoder, true); - - dbi_output->mode_flags &= ~MODE_SETTING_IN_ENCODER; - - rect.x = rect.y = 0; - rect.width = 864; - rect.height = 480; - - if (dbi_output->channel_num == 1) { - dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_2; - /* If DPU enabled report a fullscreen damage */ - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, &rect); - } else { - dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_0; - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, &rect); - } - dbi_output->mode_flags |= MODE_SETTING_ENCODER_DONE; -} - -static void pyr_dsi_dbi_dpms(struct drm_encoder *encoder, int mode) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct drm_device *dev = dbi_output->dev; - - dev_dbg(dev->dev, "%s\n", (mode == DRM_MODE_DPMS_ON ? "on" : "off")); - - if (mode == DRM_MODE_DPMS_ON) - pyr_dsi_dbi_set_power(encoder, true); - else - pyr_dsi_dbi_set_power(encoder, false); -} - -/* - * Update the DBI MIPI Panel Frame Buffer. - */ -static void pyr_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output, - int pipe) -{ - struct mdfld_dsi_pkg_sender *sender = - mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base); - struct drm_device *dev = dbi_output->dev; - struct drm_crtc *crtc = dbi_output->base.base.crtc; - struct psb_intel_crtc *psb_crtc = (crtc) ? - to_psb_intel_crtc(crtc) : NULL; - - u32 dpll_reg = MRST_DPLL_A; - u32 dspcntr_reg = DSPACNTR; - u32 pipeconf_reg = PIPEACONF; - u32 dsplinoff_reg = DSPALINOFF; - u32 dspsurf_reg = DSPASURF; - u32 hs_gen_ctrl_reg = HS_GEN_CTRL_REG; - u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG; - u32 reg_offset = 0; - - u32 intr_status; - u32 fifo_stat_reg_val; - u32 dpll_reg_val; - u32 dspcntr_reg_val; - u32 pipeconf_reg_val; - - /* If mode setting on-going, back off */ - if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) || - (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING) || - !(dbi_output->mode_flags & MODE_SETTING_ENCODER_DONE)) - return; - - /* - * Look for errors here. In particular we're checking for whatever - * error status might have appeared during the last frame transmit - * (memory write). - * - * Normally, the bits we're testing here would be set infrequently, - * if at all. However, one panel (at least) returns at least one - * error bit on most frames. So we've disabled the kernel message - * for now. - * - * Still clear whatever error bits are set, except don't clear the - * ones that would make the Penwell DSI controller reset if we - * cleared them. - */ - intr_status = REG_READ(INTR_STAT_REG); - if ((intr_status & 0x26FFFFFF) != 0) { - /* dev_err(dev->dev, "DSI status: 0x%08X\n", intr_status); */ - intr_status &= 0x26F3FFFF; - REG_WRITE(INTR_STAT_REG, intr_status); - } - - if (pipe == 2) { - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - dsplinoff_reg = DSPCLINOFF; - dspsurf_reg = DSPCSURF; - - hs_gen_ctrl_reg = HS_GEN_CTRL_REG + MIPIC_REG_OFFSET; - gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET, - - reg_offset = MIPIC_REG_OFFSET; - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - fifo_stat_reg_val = REG_READ(MIPIA_GEN_FIFO_STAT_REG + reg_offset); - dpll_reg_val = REG_READ(dpll_reg); - dspcntr_reg_val = REG_READ(dspcntr_reg); - pipeconf_reg_val = REG_READ(pipeconf_reg); - - if (!(fifo_stat_reg_val & (1 << 27)) || - (dpll_reg_val & DPLL_VCO_ENABLE) || - !(dspcntr_reg_val & DISPLAY_PLANE_ENABLE) || - !(pipeconf_reg_val & DISPLAY_PLANE_ENABLE)) { - goto update_fb_out0; - } - - /* Refresh plane changes */ - REG_WRITE(dsplinoff_reg, REG_READ(dsplinoff_reg)); - REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg)); - REG_READ(dspsurf_reg); - - mdfld_dsi_send_dcs(sender, - write_mem_start, - NULL, - 0, - CMD_DATA_SRC_PIPE, - MDFLD_DSI_SEND_PACKAGE); - - /* - * The idea here is to transmit a Generic Read command after the - * Write Memory Start/Continue commands finish. This asks for - * the panel to return an "ACK No Errors," or (if it has errors - * to report) an Error Report. This allows us to monitor the - * panel's perception of the health of the DSI. - */ - mdfld_dsi_gen_fifo_ready(dev, gen_fifo_stat_reg, - HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY); - REG_WRITE(hs_gen_ctrl_reg, (1 << WORD_COUNTS_POS) | GEN_READ_0); - - dbi_output->dsr_fb_update_done = true; -update_fb_out0: - gma_power_end(dev); -} - -/* - * TODO: will be removed later, should work out display interfaces for power - */ -void pyr_dsi_adapter_init(struct mdfld_dsi_config *dsi_config, int pipe) -{ - if (!dsi_config || (pipe != 0 && pipe != 2)) { - WARN_ON(1); - return; - } - pyr_dsi_controller_dbi_init(dsi_config, pipe); -} - -static int pyr_cmd_get_panel_info(struct drm_device *dev, int pipe, - struct panel_info *pi) -{ - if (!dev || !pi) - return -EINVAL; - - pi->width_mm = PYR_PANEL_WIDTH; - pi->height_mm = PYR_PANEL_HEIGHT; - - return 0; -} - -/* PYR DBI encoder helper funcs */ -static const struct drm_encoder_helper_funcs pyr_dsi_dbi_helper_funcs = { - .dpms = pyr_dsi_dbi_dpms, - .mode_fixup = pyr_dsi_dbi_mode_fixup, - .prepare = pyr_dsi_dbi_prepare, - .mode_set = pyr_dsi_dbi_mode_set, - .commit = pyr_dsi_dbi_commit, -}; - -/* PYR DBI encoder funcs */ -static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -void pyr_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs) -{ - p_funcs->encoder_funcs = &mdfld_dsi_dbi_encoder_funcs; - p_funcs->encoder_helper_funcs = &pyr_dsi_dbi_helper_funcs; - p_funcs->get_config_mode = &pyr_cmd_get_config_mode; - p_funcs->update_fb = pyr_dsi_dbi_update_fb; - p_funcs->get_panel_info = pyr_cmd_get_panel_info; -} diff --git a/drivers/staging/gma500/mdfld_tmd_vid.c b/drivers/staging/gma500/mdfld_tmd_vid.c deleted file mode 100644 index affdc09c6769..000000000000 --- a/drivers/staging/gma500/mdfld_tmd_vid.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Jim Liu - * Jackie Li - * Gideon Eaton - */ - -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" - -#include "mdfld_dsi_pkg_sender.h" - -#include "displays/tmd_vid.h" - -/* FIXME: static ? */ -struct drm_display_mode *tmd_vid_get_config_mode(struct drm_device *dev) -{ - struct drm_display_mode *mode; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_timing_info *ti = &dev_priv->gct_data.DTD; - bool use_gct = false; /*Disable GCT for now*/ - - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) { - dev_err(dev->dev, "Out of memory\n"); - return NULL; - } - - if (use_gct) { - dev_dbg(dev->dev, "gct find MIPI panel.\n"); - - mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; - mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; - mode->hsync_start = mode->hdisplay + - ((ti->hsync_offset_hi << 8) | - ti->hsync_offset_lo); - mode->hsync_end = mode->hsync_start + - ((ti->hsync_pulse_width_hi << 8) | - ti->hsync_pulse_width_lo); - mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | - ti->hblank_lo); - mode->vsync_start = \ - mode->vdisplay + ((ti->vsync_offset_hi << 8) | - ti->vsync_offset_lo); - mode->vsync_end = \ - mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \ - ti->vsync_pulse_width_lo); - mode->vtotal = mode->vdisplay + - ((ti->vblank_hi << 8) | ti->vblank_lo); - mode->clock = ti->pixel_clock * 10; - - dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay); - dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay); - dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start); - dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end); - dev_dbg(dev->dev, "htotal is %d\n", mode->htotal); - dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start); - dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end); - dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal); - dev_dbg(dev->dev, "clock is %d\n", mode->clock); - } else { - mode->hdisplay = 480; - mode->vdisplay = 854; - mode->hsync_start = 487; - mode->hsync_end = 490; - mode->htotal = 499; - mode->vsync_start = 861; - mode->vsync_end = 865; - mode->vtotal = 873; - mode->clock = 33264; - } - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - mode->type |= DRM_MODE_TYPE_PREFERRED; - - return mode; -} - -static int tmd_vid_get_panel_info(struct drm_device *dev, - int pipe, - struct panel_info *pi) -{ - if (!dev || !pi) - return -EINVAL; - - pi->width_mm = TMD_PANEL_WIDTH; - pi->height_mm = TMD_PANEL_HEIGHT; - - return 0; -} - -/* - * mdfld_init_TMD_MIPI - initialise a TMD interface - * @dsi_config: configuration - * @pipe: pipe to configure - * - * This function is called only by mrst_dsi_mode_set and - * restore_display_registers. since this function does not - * acquire the mutex, it is important that the calling function - * does! - */ - - -static void mdfld_dsi_tmd_drv_ic_init(struct mdfld_dsi_config *dsi_config, - int pipe) -{ - static u32 tmd_cmd_mcap_off[] = {0x000000b2}; - static u32 tmd_cmd_enable_lane_switch[] = {0x000101ef}; - static u32 tmd_cmd_set_lane_num[] = {0x006360ef}; - static u32 tmd_cmd_pushing_clock0[] = {0x00cc2fef}; - static u32 tmd_cmd_pushing_clock1[] = {0x00dd6eef}; - static u32 tmd_cmd_set_mode[] = {0x000000b3}; - static u32 tmd_cmd_set_sync_pulse_mode[] = {0x000961ef}; - static u32 tmd_cmd_set_column[] = {0x0100002a, 0x000000df}; - static u32 tmd_cmd_set_page[] = {0x0300002b, 0x00000055}; - static u32 tmd_cmd_set_video_mode[] = {0x00000153}; - /*no auto_bl,need add in furture*/ - static u32 tmd_cmd_enable_backlight[] = {0x00005ab4}; - static u32 tmd_cmd_set_backlight_dimming[] = {0x00000ebd}; - - struct mdfld_dsi_pkg_sender *sender - = mdfld_dsi_get_pkg_sender(dsi_config); - - DRM_INFO("Enter mdfld init TMD MIPI display.\n"); - - if (!sender) { - DRM_ERROR("Cannot get sender\n"); - return; - } - - if (dsi_config->dvr_ic_inited) - return; - - msleep(3); - - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_mcap_off, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_lane_switch, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_lane_num, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_pushing_clock0, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_pushing_clock1, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_mode, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_sync_pulse_mode, 1, 0); - mdfld_dsi_send_mcs_long_lp(sender, tmd_cmd_set_column, 2, 0); - mdfld_dsi_send_mcs_long_lp(sender, tmd_cmd_set_page, 2, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_video_mode, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_backlight, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_backlight_dimming, 1, 0); - - dsi_config->dvr_ic_inited = 1; -} - -/* TMD DPI encoder helper funcs */ -static const struct drm_encoder_helper_funcs - mdfld_tpo_dpi_encoder_helper_funcs = { - .dpms = mdfld_dsi_dpi_dpms, - .mode_fixup = mdfld_dsi_dpi_mode_fixup, - .prepare = mdfld_dsi_dpi_prepare, - .mode_set = mdfld_dsi_dpi_mode_set, - .commit = mdfld_dsi_dpi_commit, -}; - -/* TMD DPI encoder funcs */ -static const struct drm_encoder_funcs mdfld_tpo_dpi_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -void tmd_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs) -{ - if (!dev || !p_funcs) { - dev_err(dev->dev, "Invalid parameters\n"); - return; - } - - p_funcs->encoder_funcs = &mdfld_tpo_dpi_encoder_funcs; - p_funcs->encoder_helper_funcs = &mdfld_tpo_dpi_encoder_helper_funcs; - p_funcs->get_config_mode = &tmd_vid_get_config_mode; - p_funcs->update_fb = NULL; - p_funcs->get_panel_info = tmd_vid_get_panel_info; - p_funcs->reset = mdfld_dsi_panel_reset; - p_funcs->drv_ic_init = mdfld_dsi_tmd_drv_ic_init; -} diff --git a/drivers/staging/gma500/mdfld_tpo_cmd.c b/drivers/staging/gma500/mdfld_tpo_cmd.c deleted file mode 100644 index c7f7c9c19bc1..000000000000 --- a/drivers/staging/gma500/mdfld_tpo_cmd.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton - * Scott Rowe - */ - -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" -#include "mdfld_dsi_dbi_dpu.h" -#include "mdfld_dsi_pkg_sender.h" - -#include "displays/tpo_cmd.h" - -static struct drm_display_mode *tpo_cmd_get_config_mode(struct drm_device *dev) -{ - struct drm_display_mode *mode; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_timing_info *ti = &dev_priv->gct_data.DTD; - bool use_gct = false; - - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) - return NULL; - - if (use_gct) { - dev_dbg(dev->dev, "gct find MIPI panel.\n"); - - mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; - mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; - mode->hsync_start = mode->hdisplay + \ - ((ti->hsync_offset_hi << 8) | \ - ti->hsync_offset_lo); - mode->hsync_end = mode->hsync_start + \ - ((ti->hsync_pulse_width_hi << 8) | \ - ti->hsync_pulse_width_lo); - mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ - ti->hblank_lo); - mode->vsync_start = \ - mode->vdisplay + ((ti->vsync_offset_hi << 8) | \ - ti->vsync_offset_lo); - mode->vsync_end = \ - mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \ - ti->vsync_pulse_width_lo); - mode->vtotal = mode->vdisplay + \ - ((ti->vblank_hi << 8) | ti->vblank_lo); - mode->clock = ti->pixel_clock * 10; - - dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay); - dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay); - dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start); - dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end); - dev_dbg(dev->dev, "htotal is %d\n", mode->htotal); - dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start); - dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end); - dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal); - dev_dbg(dev->dev, "clock is %d\n", mode->clock); - } else { - mode->hdisplay = 864; - mode->vdisplay = 480; - mode->hsync_start = 872; - mode->hsync_end = 876; - mode->htotal = 884; - mode->vsync_start = 482; - mode->vsync_end = 494; - mode->vtotal = 486; - mode->clock = 25777; - } - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - mode->type |= DRM_MODE_TYPE_PREFERRED; - - return mode; -} - -static bool mdfld_dsi_dbi_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct drm_display_mode *fixed_mode = tpo_cmd_get_config_mode(dev); - - if (fixed_mode) { - adjusted_mode->hdisplay = fixed_mode->hdisplay; - adjusted_mode->hsync_start = fixed_mode->hsync_start; - adjusted_mode->hsync_end = fixed_mode->hsync_end; - adjusted_mode->htotal = fixed_mode->htotal; - adjusted_mode->vdisplay = fixed_mode->vdisplay; - adjusted_mode->vsync_start = fixed_mode->vsync_start; - adjusted_mode->vsync_end = fixed_mode->vsync_end; - adjusted_mode->vtotal = fixed_mode->vtotal; - adjusted_mode->clock = fixed_mode->clock; - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - kfree(fixed_mode); - } - return true; -} - -static void mdfld_dsi_dbi_set_power(struct drm_encoder *encoder, bool on) -{ - int ret = 0; - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct mdfld_dsi_config *dsi_config = - mdfld_dsi_encoder_get_config(dsi_encoder); - struct mdfld_dsi_pkg_sender *sender = - mdfld_dsi_encoder_get_pkg_sender(dsi_encoder); - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 reg_offset = 0; - int pipe = (dbi_output->channel_num == 0) ? 0 : 2; - u32 data = 0; - - dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n", - pipe, on ? "On" : "Off", - dbi_output->dbi_panel_on ? "True" : "False"); - - if (pipe == 2) { - if (on) - dev_priv->dual_mipi = true; - else - dev_priv->dual_mipi = false; - reg_offset = MIPIC_REG_OFFSET; - } else { - if (!on) - dev_priv->dual_mipi = false; - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - if (on) { - if (dbi_output->dbi_panel_on) - goto out_err; - - ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_ON); - if (ret) { - dev_err(dev->dev, "power on error\n"); - goto out_err; - } - - dbi_output->dbi_panel_on = true; - - if (pipe == 2) - dev_priv->dbi_panel_on2 = true; - else - dev_priv->dbi_panel_on = true; - mdfld_enable_te(dev, pipe); - } else { - if (!dbi_output->dbi_panel_on && !dbi_output->first_boot) - goto out_err; - - dbi_output->dbi_panel_on = false; - dbi_output->first_boot = false; - - if (pipe == 2) - dev_priv->dbi_panel_on2 = false; - else - dev_priv->dbi_panel_on = false; - - mdfld_disable_te(dev, pipe); - - ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_OFF); - if (ret) { - dev_err(dev->dev, "power on error\n"); - goto out_err; - } - } - - /* - * FIXME: this is a WA for TPO panel crash on DPMS on & off around - * 83 times. the root cause of this issue is that Booster in - * drvIC crashed. Add this WA so that we can resume the driver IC - * once we found that booster has a fault - */ - mdfld_dsi_get_power_mode(dsi_config, - &data, - MDFLD_DSI_HS_TRANSMISSION); - - if (on && data && !(data & (1 << 7))) { - /* Soft reset */ - mdfld_dsi_send_dcs(sender, - DCS_SOFT_RESET, - NULL, - 0, - CMD_DATA_SRC_PIPE, - MDFLD_DSI_SEND_PACKAGE); - - /* Init drvIC */ - if (dbi_output->p_funcs->drv_ic_init) - dbi_output->p_funcs->drv_ic_init(dsi_config, - pipe); - } - -out_err: - gma_power_end(dev); - if (ret) - dev_err(dev->dev, "failed\n"); -} - - -static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - int ret = 0; - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dsi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct mdfld_dsi_config *dsi_config = - mdfld_dsi_encoder_get_config(dsi_encoder); - struct mdfld_dsi_connector *dsi_connector = dsi_config->connector; - int pipe = dsi_connector->pipe; - u8 param = 0; - - /* Regs */ - u32 mipi_reg = MIPI; - u32 dspcntr_reg = DSPACNTR; - u32 pipeconf_reg = PIPEACONF; - u32 reg_offset = 0; - - /* Values */ - u32 dspcntr_val = dev_priv->dspcntr; - u32 pipeconf_val = dev_priv->pipeconf; - u32 h_active_area = mode->hdisplay; - u32 v_active_area = mode->vdisplay; - u32 mipi_val; - - mipi_val = (PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX | - TE_TRIGGER_GPIO_PIN); - - dev_dbg(dev->dev, "mipi_val =0x%x\n", mipi_val); - - dev_dbg(dev->dev, "type %s\n", (pipe == 2) ? "MIPI2" : "MIPI"); - dev_dbg(dev->dev, "h %d v %d\n", mode->hdisplay, mode->vdisplay); - - if (pipe == 2) { - mipi_reg = MIPI_C; - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - - reg_offset = MIPIC_REG_OFFSET; - - dspcntr_val = dev_priv->dspcntr2; - pipeconf_val = dev_priv->pipeconf2; - } else { - mipi_val |= 0x2; /*two lanes for port A and C respectively*/ - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - REG_WRITE(dspcntr_reg, dspcntr_val); - REG_READ(dspcntr_reg); - - /* 20ms delay before sending exit_sleep_mode */ - msleep(20); - - /* Send exit_sleep_mode DCS */ - ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_EXIT_SLEEP_MODE, - NULL, 0, CMD_DATA_SRC_SYSTEM_MEM); - if (ret) { - dev_err(dev->dev, "sent exit_sleep_mode faild\n"); - goto out_err; - } - - /* Send set_tear_on DCS */ - ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_SET_TEAR_ON, - ¶m, 1, CMD_DATA_SRC_SYSTEM_MEM); - if (ret) { - dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__); - goto out_err; - } - - /* Do some init stuff */ - REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR); - REG_READ(pipeconf_reg); - - /* TODO: this looks ugly, try to move it to CRTC mode setting*/ - if (pipe == 2) - dev_priv->pipeconf2 |= PIPEACONF_DSR; - else - dev_priv->pipeconf |= PIPEACONF_DSR; - - dev_dbg(dev->dev, "pipeconf %x\n", REG_READ(pipeconf_reg)); - - ret = mdfld_dsi_dbi_update_area(dsi_output, 0, 0, - h_active_area - 1, v_active_area - 1); - if (ret) { - dev_err(dev->dev, "update area failed\n"); - goto out_err; - } - -out_err: - gma_power_end(dev); - - if (ret) - dev_err(dev->dev, "mode set failed\n"); -} - -static void mdfld_dsi_dbi_prepare(struct drm_encoder *encoder) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output - = MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - - dbi_output->mode_flags |= MODE_SETTING_IN_ENCODER; - dbi_output->mode_flags &= ~MODE_SETTING_ENCODER_DONE; - - mdfld_dsi_dbi_set_power(encoder, false); -} - -static void mdfld_dsi_dbi_commit(struct drm_encoder *encoder) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_drm_dpu_rect rect; - - mdfld_dsi_dbi_set_power(encoder, true); - dbi_output->mode_flags &= ~MODE_SETTING_IN_ENCODER; - - rect.x = rect.y = 0; - rect.width = 864; - rect.height = 480; - - if (dbi_output->channel_num == 1) { - dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_2; - /*if dpu enabled report a fullscreen damage*/ - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, &rect); - } else { - dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_0; - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, &rect); - } - dbi_output->mode_flags |= MODE_SETTING_ENCODER_DONE; -} - -static void mdfld_dsi_dbi_dpms(struct drm_encoder *encoder, int mode) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output - = MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - static bool bdispoff; - - dev_dbg(dev->dev, "%s\n", (mode == DRM_MODE_DPMS_ON ? "on" : "off")); - - if (mode == DRM_MODE_DPMS_ON) { - /* - * FIXME: in case I am wrong! - * we don't need to exit dsr here to wake up plane/pipe/pll - * if everything goes right, hw_begin will resume them all - * during set_power. - */ - if (bdispoff /* FIXME && gbgfxsuspended */) { - mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D); - bdispoff = false; - dev_priv->dispstatus = true; - } - - mdfld_dsi_dbi_set_power(encoder, true); - /* FIXME if (gbgfxsuspended) - gbgfxsuspended = false; */ - } else { - /* - * I am not sure whether this is the perfect place to - * turn rpm on since we still have a lot of CRTC turnning - * on work to do. - */ - bdispoff = true; - dev_priv->dispstatus = false; - mdfld_dsi_dbi_set_power(encoder, false); - } -} - - -/* - * Update the DBI MIPI Panel Frame Buffer. - */ -static void mdfld_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output, - int pipe) -{ - struct mdfld_dsi_pkg_sender *sender = - mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base); - struct drm_device *dev = dbi_output->dev; - struct drm_crtc *crtc = dbi_output->base.base.crtc; - struct psb_intel_crtc *psb_crtc = (crtc) ? - to_psb_intel_crtc(crtc) : NULL; - u32 dpll_reg = MRST_DPLL_A; - u32 dspcntr_reg = DSPACNTR; - u32 pipeconf_reg = PIPEACONF; - u32 dsplinoff_reg = DSPALINOFF; - u32 dspsurf_reg = DSPASURF; - u32 reg_offset = 0; - - /* If mode setting on-going, back off */ - if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) || - (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING) || - !(dbi_output->mode_flags & MODE_SETTING_ENCODER_DONE)) - return; - - if (pipe == 2) { - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - dsplinoff_reg = DSPCLINOFF; - dspsurf_reg = DSPCSURF; - reg_offset = MIPIC_REG_OFFSET; - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - /* Check DBI FIFO status */ - if (!(REG_READ(dpll_reg) & DPLL_VCO_ENABLE) || - !(REG_READ(dspcntr_reg) & DISPLAY_PLANE_ENABLE) || - !(REG_READ(pipeconf_reg) & DISPLAY_PLANE_ENABLE)) - goto update_fb_out0; - - /* Refresh plane changes */ - REG_WRITE(dsplinoff_reg, REG_READ(dsplinoff_reg)); - REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg)); - REG_READ(dspsurf_reg); - - mdfld_dsi_send_dcs(sender, - DCS_WRITE_MEM_START, - NULL, - 0, - CMD_DATA_SRC_PIPE, - MDFLD_DSI_SEND_PACKAGE); - - dbi_output->dsr_fb_update_done = true; -update_fb_out0: - gma_power_end(dev); -} - -static int tpo_cmd_get_panel_info(struct drm_device *dev, - int pipe, - struct panel_info *pi) -{ - if (!dev || !pi) - return -EINVAL; - - pi->width_mm = TPO_PANEL_WIDTH; - pi->height_mm = TPO_PANEL_HEIGHT; - - return 0; -} - - -/* TPO DBI encoder helper funcs */ -static const struct drm_encoder_helper_funcs mdfld_dsi_dbi_helper_funcs = { - .dpms = mdfld_dsi_dbi_dpms, - .mode_fixup = mdfld_dsi_dbi_mode_fixup, - .prepare = mdfld_dsi_dbi_prepare, - .mode_set = mdfld_dsi_dbi_mode_set, - .commit = mdfld_dsi_dbi_commit, -}; - -/* TPO DBI encoder funcs */ -static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs) -{ - p_funcs->encoder_funcs = &mdfld_dsi_dbi_encoder_funcs; - p_funcs->encoder_helper_funcs = &mdfld_dsi_dbi_helper_funcs; - p_funcs->get_config_mode = &tpo_cmd_get_config_mode; - p_funcs->update_fb = mdfld_dsi_dbi_update_fb; - p_funcs->get_panel_info = tpo_cmd_get_panel_info; - p_funcs->reset = mdfld_dsi_panel_reset; - p_funcs->drv_ic_init = mdfld_dsi_brightness_init; -} diff --git a/drivers/staging/gma500/mdfld_tpo_vid.c b/drivers/staging/gma500/mdfld_tpo_vid.c deleted file mode 100644 index 954901751760..000000000000 --- a/drivers/staging/gma500/mdfld_tpo_vid.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * jim liu - * Jackie Li - */ - -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" - -#include "mdfld_dsi_pkg_sender.h" - -#include "displays/tpo_vid.h" - -static struct drm_display_mode *tpo_vid_get_config_mode(struct drm_device *dev) -{ - struct drm_display_mode *mode; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_timing_info *ti = &dev_priv->gct_data.DTD; - bool use_gct = false; - - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) { - dev_err(dev->dev, "out of memory\n"); - return NULL; - } - - if (use_gct) { - mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; - mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; - mode->hsync_start = mode->hdisplay + \ - ((ti->hsync_offset_hi << 8) | \ - ti->hsync_offset_lo); - mode->hsync_end = mode->hsync_start + \ - ((ti->hsync_pulse_width_hi << 8) | \ - ti->hsync_pulse_width_lo); - mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ - ti->hblank_lo); - mode->vsync_start = \ - mode->vdisplay + ((ti->vsync_offset_hi << 8) | \ - ti->vsync_offset_lo); - mode->vsync_end = \ - mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \ - ti->vsync_pulse_width_lo); - mode->vtotal = mode->vdisplay + \ - ((ti->vblank_hi << 8) | ti->vblank_lo); - mode->clock = ti->pixel_clock * 10; - - dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay); - dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay); - dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start); - dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end); - dev_dbg(dev->dev, "htotal is %d\n", mode->htotal); - dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start); - dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end); - dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal); - dev_dbg(dev->dev, "clock is %d\n", mode->clock); - } else { - mode->hdisplay = 864; - mode->vdisplay = 480; - mode->hsync_start = 873; - mode->hsync_end = 876; - mode->htotal = 887; - mode->vsync_start = 487; - mode->vsync_end = 490; - mode->vtotal = 499; - mode->clock = 33264; - } - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - mode->type |= DRM_MODE_TYPE_PREFERRED; - - return mode; -} - -static int tpo_vid_get_panel_info(struct drm_device *dev, - int pipe, - struct panel_info *pi) -{ - if (!dev || !pi) - return -EINVAL; - - pi->width_mm = TPO_PANEL_WIDTH; - pi->height_mm = TPO_PANEL_HEIGHT; - - return 0; -} - -/*TPO DPI encoder helper funcs*/ -static const struct drm_encoder_helper_funcs - mdfld_tpo_dpi_encoder_helper_funcs = { - .dpms = mdfld_dsi_dpi_dpms, - .mode_fixup = mdfld_dsi_dpi_mode_fixup, - .prepare = mdfld_dsi_dpi_prepare, - .mode_set = mdfld_dsi_dpi_mode_set, - .commit = mdfld_dsi_dpi_commit, -}; - -/*TPO DPI encoder funcs*/ -static const struct drm_encoder_funcs mdfld_tpo_dpi_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -void tpo_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs) -{ - if (!dev || !p_funcs) { - dev_err(dev->dev, "tpo_vid_init: Invalid parameters\n"); - return; - } - - p_funcs->encoder_funcs = &mdfld_tpo_dpi_encoder_funcs; - p_funcs->encoder_helper_funcs = &mdfld_tpo_dpi_encoder_helper_funcs; - p_funcs->get_config_mode = &tpo_vid_get_config_mode; - p_funcs->update_fb = NULL; - p_funcs->get_panel_info = tpo_vid_get_panel_info; -} diff --git a/drivers/staging/gma500/medfield.h b/drivers/staging/gma500/medfield.h deleted file mode 100644 index 09e9687431f1..000000000000 --- a/drivers/staging/gma500/medfield.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright © 2011 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* Medfield DSI controller registers */ - -#define MIPIA_DEVICE_READY_REG 0xb000 -#define MIPIA_INTR_STAT_REG 0xb004 -#define MIPIA_INTR_EN_REG 0xb008 -#define MIPIA_DSI_FUNC_PRG_REG 0xb00c -#define MIPIA_HS_TX_TIMEOUT_REG 0xb010 -#define MIPIA_LP_RX_TIMEOUT_REG 0xb014 -#define MIPIA_TURN_AROUND_TIMEOUT_REG 0xb018 -#define MIPIA_DEVICE_RESET_TIMER_REG 0xb01c -#define MIPIA_DPI_RESOLUTION_REG 0xb020 -#define MIPIA_DBI_FIFO_THROTTLE_REG 0xb024 -#define MIPIA_HSYNC_COUNT_REG 0xb028 -#define MIPIA_HBP_COUNT_REG 0xb02c -#define MIPIA_HFP_COUNT_REG 0xb030 -#define MIPIA_HACTIVE_COUNT_REG 0xb034 -#define MIPIA_VSYNC_COUNT_REG 0xb038 -#define MIPIA_VBP_COUNT_REG 0xb03c -#define MIPIA_VFP_COUNT_REG 0xb040 -#define MIPIA_HIGH_LOW_SWITCH_COUNT_REG 0xb044 -#define MIPIA_DPI_CONTROL_REG 0xb048 -#define MIPIA_DPI_DATA_REG 0xb04c -#define MIPIA_INIT_COUNT_REG 0xb050 -#define MIPIA_MAX_RETURN_PACK_SIZE_REG 0xb054 -#define MIPIA_VIDEO_MODE_FORMAT_REG 0xb058 -#define MIPIA_EOT_DISABLE_REG 0xb05c -#define MIPIA_LP_BYTECLK_REG 0xb060 -#define MIPIA_LP_GEN_DATA_REG 0xb064 -#define MIPIA_HS_GEN_DATA_REG 0xb068 -#define MIPIA_LP_GEN_CTRL_REG 0xb06c -#define MIPIA_HS_GEN_CTRL_REG 0xb070 -#define MIPIA_GEN_FIFO_STAT_REG 0xb074 -#define MIPIA_HS_LS_DBI_ENABLE_REG 0xb078 -#define MIPIA_DPHY_PARAM_REG 0xb080 -#define MIPIA_DBI_BW_CTRL_REG 0xb084 -#define MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG 0xb088 - -#define DSI_DEVICE_READY (0x1) -#define DSI_POWER_STATE_ULPS_ENTER (0x2 << 1) -#define DSI_POWER_STATE_ULPS_EXIT (0x1 << 1) -#define DSI_POWER_STATE_ULPS_OFFSET (0x1) - - -#define DSI_ONE_DATA_LANE (0x1) -#define DSI_TWO_DATA_LANE (0x2) -#define DSI_THREE_DATA_LANE (0X3) -#define DSI_FOUR_DATA_LANE (0x4) -#define DSI_DPI_VIRT_CHANNEL_OFFSET (0x3) -#define DSI_DBI_VIRT_CHANNEL_OFFSET (0x5) -#define DSI_DPI_COLOR_FORMAT_RGB565 (0x01 << 7) -#define DSI_DPI_COLOR_FORMAT_RGB666 (0x02 << 7) -#define DSI_DPI_COLOR_FORMAT_RGB666_UNPACK (0x03 << 7) -#define DSI_DPI_COLOR_FORMAT_RGB888 (0x04 << 7) -#define DSI_DBI_COLOR_FORMAT_OPTION2 (0x05 << 13) - -#define DSI_INTR_STATE_RXSOTERROR 1 - -#define DSI_INTR_STATE_SPL_PKG_SENT (1 << 30) -#define DSI_INTR_STATE_TE (1 << 31) - -#define DSI_HS_TX_TIMEOUT_MASK (0xffffff) - -#define DSI_LP_RX_TIMEOUT_MASK (0xffffff) - -#define DSI_TURN_AROUND_TIMEOUT_MASK (0x3f) - -#define DSI_RESET_TIMER_MASK (0xffff) - -#define DSI_DBI_FIFO_WM_HALF (0x0) -#define DSI_DBI_FIFO_WM_QUARTER (0x1) -#define DSI_DBI_FIFO_WM_LOW (0x2) - -#define DSI_DPI_TIMING_MASK (0xffff) - -#define DSI_INIT_TIMER_MASK (0xffff) - -#define DSI_DBI_RETURN_PACK_SIZE_MASK (0x3ff) - -#define DSI_LP_BYTECLK_MASK (0x0ffff) - -#define DSI_HS_CTRL_GEN_SHORT_W0 (0x03) -#define DSI_HS_CTRL_GEN_SHORT_W1 (0x13) -#define DSI_HS_CTRL_GEN_SHORT_W2 (0x23) -#define DSI_HS_CTRL_GEN_R0 (0x04) -#define DSI_HS_CTRL_GEN_R1 (0x14) -#define DSI_HS_CTRL_GEN_R2 (0x24) -#define DSI_HS_CTRL_GEN_LONG_W (0x29) -#define DSI_HS_CTRL_MCS_SHORT_W0 (0x05) -#define DSI_HS_CTRL_MCS_SHORT_W1 (0x15) -#define DSI_HS_CTRL_MCS_R0 (0x06) -#define DSI_HS_CTRL_MCS_LONG_W (0x39) -#define DSI_HS_CTRL_VC_OFFSET (0x06) -#define DSI_HS_CTRL_WC_OFFSET (0x08) - -#define DSI_FIFO_GEN_HS_DATA_FULL (1 << 0) -#define DSI_FIFO_GEN_HS_DATA_HALF_EMPTY (1 << 1) -#define DSI_FIFO_GEN_HS_DATA_EMPTY (1 << 2) -#define DSI_FIFO_GEN_LP_DATA_FULL (1 << 8) -#define DSI_FIFO_GEN_LP_DATA_HALF_EMPTY (1 << 9) -#define DSI_FIFO_GEN_LP_DATA_EMPTY (1 << 10) -#define DSI_FIFO_GEN_HS_CTRL_FULL (1 << 16) -#define DSI_FIFO_GEN_HS_CTRL_HALF_EMPTY (1 << 17) -#define DSI_FIFO_GEN_HS_CTRL_EMPTY (1 << 18) -#define DSI_FIFO_GEN_LP_CTRL_FULL (1 << 24) -#define DSI_FIFO_GEN_LP_CTRL_HALF_EMPTY (1 << 25) -#define DSI_FIFO_GEN_LP_CTRL_EMPTY (1 << 26) -#define DSI_FIFO_DBI_EMPTY (1 << 27) -#define DSI_FIFO_DPI_EMPTY (1 << 28) - -#define DSI_DBI_HS_LP_SWITCH_MASK (0x1) - -#define DSI_HS_LP_SWITCH_COUNTER_OFFSET (0x0) -#define DSI_LP_HS_SWITCH_COUNTER_OFFSET (0x16) - -#define DSI_DPI_CTRL_HS_SHUTDOWN (0x00000001) -#define DSI_DPI_CTRL_HS_TURN_ON (0x00000002) - -/* Medfield DSI adapter registers */ -#define MIPIA_CONTROL_REG 0xb104 -#define MIPIA_DATA_ADD_REG 0xb108 -#define MIPIA_DATA_LEN_REG 0xb10c -#define MIPIA_CMD_ADD_REG 0xb110 -#define MIPIA_CMD_LEN_REG 0xb114 - -/*dsi power modes*/ -#define DSI_POWER_MODE_DISPLAY_ON (1 << 2) -#define DSI_POWER_MODE_NORMAL_ON (1 << 3) -#define DSI_POWER_MODE_SLEEP_OUT (1 << 4) -#define DSI_POWER_MODE_PARTIAL_ON (1 << 5) -#define DSI_POWER_MODE_IDLE_ON (1 << 6) - -enum { - MDFLD_DSI_ENCODER_DBI = 0, - MDFLD_DSI_ENCODER_DPI, -}; - -enum { - MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE = 1, - MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS = 2, - MDFLD_DSI_VIDEO_BURST_MODE = 3, -}; - -#define DSI_DPI_COMPLETE_LAST_LINE (1 << 2) -#define DSI_DPI_DISABLE_BTA (1 << 3) -/* Panel types */ -enum { - TPO_CMD, - TPO_VID, - TMD_CMD, - TMD_VID, - PYR_CMD, - PYR_VID, - TPO, - TMD, - PYR, - HDMI, - GCT_DETECT -}; - -/* Junk that belongs elsewhere */ -#define TPO_PANEL_WIDTH 84 -#define TPO_PANEL_HEIGHT 46 -#define TMD_PANEL_WIDTH 39 -#define TMD_PANEL_HEIGHT 71 -#define PYR_PANEL_WIDTH 53 -#define PYR_PANEL_HEIGHT 95 - -/* Panel interface */ -struct panel_info { - u32 width_mm; - u32 height_mm; -}; - -struct mdfld_dsi_dbi_output; - -struct mdfld_dsi_connector_state { - u32 mipi_ctrl_reg; -}; - -struct mdfld_dsi_encoder_state { - -}; - -struct mdfld_dsi_connector { - /* - * This is ugly, but I have to use connector in it! :-( - * FIXME: use drm_connector instead. - */ - struct psb_intel_output base; - - int pipe; - void *private; - void *pkg_sender; - - /* Connection status */ - enum drm_connector_status status; -}; - -struct mdfld_dsi_encoder { - struct drm_encoder base; - void *private; -}; - -/* - * DSI config, consists of one DSI connector, two DSI encoders. - * DRM will pick up on DSI encoder basing on differents configs. - */ -struct mdfld_dsi_config { - struct drm_device *dev; - struct drm_display_mode *fixed_mode; - struct drm_display_mode *mode; - - struct mdfld_dsi_connector *connector; - struct mdfld_dsi_encoder *encoders[DRM_CONNECTOR_MAX_ENCODER]; - struct mdfld_dsi_encoder *encoder; - - int changed; - - int bpp; - int type; - int lane_count; - /*Virtual channel number for this encoder*/ - int channel_num; - /*video mode configure*/ - int video_mode; - - int dvr_ic_inited; -}; - -#define MDFLD_DSI_CONNECTOR(psb_output) \ - (container_of(psb_output, struct mdfld_dsi_connector, base)) - -#define MDFLD_DSI_ENCODER(encoder) \ - (container_of(encoder, struct mdfld_dsi_encoder, base)) - -struct panel_funcs { - const struct drm_encoder_funcs *encoder_funcs; - const struct drm_encoder_helper_funcs *encoder_helper_funcs; - struct drm_display_mode *(*get_config_mode) (struct drm_device *); - void (*update_fb) (struct mdfld_dsi_dbi_output *, int); - int (*get_panel_info) (struct drm_device *, int, struct panel_info *); - int (*reset)(int pipe); - void (*drv_ic_init)(struct mdfld_dsi_config *dsi_config, int pipe); -}; - diff --git a/drivers/staging/gma500/mid_bios.c b/drivers/staging/gma500/mid_bios.c deleted file mode 100644 index ee3c0368e320..000000000000 --- a/drivers/staging/gma500/mid_bios.c +++ /dev/null @@ -1,270 +0,0 @@ -/************************************************************************** - * Copyright (c) 2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -/* TODO - * - Split functions by vbt type - * - Make them all take drm_device - * - Check ioremap failures - */ - -#include -#include -#include -#include "psb_drm.h" -#include "psb_drv.h" -#include "mid_bios.h" -#include "mdfld_output.h" - -static int panel_id = GCT_DETECT; -module_param_named(panel_id, panel_id, int, 0600); -MODULE_PARM_DESC(panel_id, "Panel Identifier"); - - -static void mid_get_fuse_settings(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - uint32_t fuse_value = 0; - uint32_t fuse_value_tmp = 0; - -#define FB_REG06 0xD0810600 -#define FB_MIPI_DISABLE (1 << 11) -#define FB_REG09 0xD0810900 -#define FB_REG09 0xD0810900 -#define FB_SKU_MASK 0x7000 -#define FB_SKU_SHIFT 12 -#define FB_SKU_100 0 -#define FB_SKU_100L 1 -#define FB_SKU_83 2 - pci_write_config_dword(pci_root, 0xD0, FB_REG06); - pci_read_config_dword(pci_root, 0xD4, &fuse_value); - - /* FB_MIPI_DISABLE doesn't mean LVDS on with Medfield */ - if (IS_MRST(dev)) - dev_priv->iLVDS_enable = fuse_value & FB_MIPI_DISABLE; - - DRM_INFO("internal display is %s\n", - dev_priv->iLVDS_enable ? "LVDS display" : "MIPI display"); - - /* Prevent runtime suspend at start*/ - if (dev_priv->iLVDS_enable) { - dev_priv->is_lvds_on = true; - dev_priv->is_mipi_on = false; - } else { - dev_priv->is_mipi_on = true; - dev_priv->is_lvds_on = false; - } - - dev_priv->video_device_fuse = fuse_value; - - pci_write_config_dword(pci_root, 0xD0, FB_REG09); - pci_read_config_dword(pci_root, 0xD4, &fuse_value); - - dev_dbg(dev->dev, "SKU values is 0x%x.\n", fuse_value); - fuse_value_tmp = (fuse_value & FB_SKU_MASK) >> FB_SKU_SHIFT; - - dev_priv->fuse_reg_value = fuse_value; - - switch (fuse_value_tmp) { - case FB_SKU_100: - dev_priv->core_freq = 200; - break; - case FB_SKU_100L: - dev_priv->core_freq = 100; - break; - case FB_SKU_83: - dev_priv->core_freq = 166; - break; - default: - dev_warn(dev->dev, "Invalid SKU values, SKU value = 0x%08x\n", - fuse_value_tmp); - dev_priv->core_freq = 0; - } - dev_dbg(dev->dev, "LNC core clk is %dMHz.\n", dev_priv->core_freq); - pci_dev_put(pci_root); -} - -/* - * Get the revison ID, B0:D2:F0;0x08 - */ -static void mid_get_pci_revID(struct drm_psb_private *dev_priv) -{ - uint32_t platform_rev_id = 0; - struct pci_dev *pci_gfx_root = pci_get_bus_and_slot(0, PCI_DEVFN(2, 0)); - - pci_read_config_dword(pci_gfx_root, 0x08, &platform_rev_id); - dev_priv->platform_rev_id = (uint8_t) platform_rev_id; - pci_dev_put(pci_gfx_root); - dev_dbg(dev_priv->dev->dev, "platform_rev_id is %x\n", - dev_priv->platform_rev_id); -} - -static void mid_get_vbt_data(struct drm_psb_private *dev_priv) -{ - struct drm_device *dev = dev_priv->dev; - struct mrst_vbt *vbt = &dev_priv->vbt_data; - u32 addr; - u16 new_size; - u8 *vbt_virtual; - u8 bpi; - u8 number_desc = 0; - struct mrst_timing_info *dp_ti = &dev_priv->gct_data.DTD; - struct gct_r10_timing_info ti; - void *pGCT; - struct pci_dev *pci_gfx_root = pci_get_bus_and_slot(0, PCI_DEVFN(2, 0)); - - /* Get the address of the platform config vbt, B0:D2:F0;0xFC */ - pci_read_config_dword(pci_gfx_root, 0xFC, &addr); - pci_dev_put(pci_gfx_root); - - dev_dbg(dev->dev, "drm platform config address is %x\n", addr); - - /* check for platform config address == 0. */ - /* this means fw doesn't support vbt */ - - if (addr == 0) { - vbt->size = 0; - return; - } - - /* get the virtual address of the vbt */ - vbt_virtual = ioremap(addr, sizeof(*vbt)); - - memcpy(vbt, vbt_virtual, sizeof(*vbt)); - iounmap(vbt_virtual); /* Free virtual address space */ - - dev_dbg(dev->dev, "GCT revision is %x\n", vbt->revision); - - switch (vbt->revision) { - case 0: - vbt->mrst_gct = ioremap(addr + sizeof(*vbt) - 4, - vbt->size - sizeof(*vbt) + 4); - pGCT = vbt->mrst_gct; - bpi = ((struct mrst_gct_v1 *)pGCT)->PD.BootPanelIndex; - dev_priv->gct_data.bpi = bpi; - dev_priv->gct_data.pt = - ((struct mrst_gct_v1 *)pGCT)->PD.PanelType; - memcpy(&dev_priv->gct_data.DTD, - &((struct mrst_gct_v1 *)pGCT)->panel[bpi].DTD, - sizeof(struct mrst_timing_info)); - dev_priv->gct_data.Panel_Port_Control = - ((struct mrst_gct_v1 *)pGCT)->panel[bpi].Panel_Port_Control; - dev_priv->gct_data.Panel_MIPI_Display_Descriptor = - ((struct mrst_gct_v1 *)pGCT)->panel[bpi].Panel_MIPI_Display_Descriptor; - break; - case 1: - vbt->mrst_gct = ioremap(addr + sizeof(*vbt) - 4, - vbt->size - sizeof(*vbt) + 4); - pGCT = vbt->mrst_gct; - bpi = ((struct mrst_gct_v2 *)pGCT)->PD.BootPanelIndex; - dev_priv->gct_data.bpi = bpi; - dev_priv->gct_data.pt = - ((struct mrst_gct_v2 *)pGCT)->PD.PanelType; - memcpy(&dev_priv->gct_data.DTD, - &((struct mrst_gct_v2 *)pGCT)->panel[bpi].DTD, - sizeof(struct mrst_timing_info)); - dev_priv->gct_data.Panel_Port_Control = - ((struct mrst_gct_v2 *)pGCT)->panel[bpi].Panel_Port_Control; - dev_priv->gct_data.Panel_MIPI_Display_Descriptor = - ((struct mrst_gct_v2 *)pGCT)->panel[bpi].Panel_MIPI_Display_Descriptor; - break; - case 0x10: - /*header definition changed from rev 01 (v2) to rev 10h. */ - /*so, some values have changed location*/ - new_size = vbt->checksum; /*checksum contains lo size byte*/ - /*LSB of mrst_gct contains hi size byte*/ - new_size |= ((0xff & (unsigned int)vbt->mrst_gct)) << 8; - - vbt->checksum = vbt->size; /*size contains the checksum*/ - if (new_size > 0xff) - vbt->size = 0xff; /*restrict size to 255*/ - else - vbt->size = new_size; - - /* number of descriptors defined in the GCT */ - number_desc = ((0xff00 & (unsigned int)vbt->mrst_gct)) >> 8; - bpi = ((0xff0000 & (unsigned int)vbt->mrst_gct)) >> 16; - vbt->mrst_gct = ioremap(addr + GCT_R10_HEADER_SIZE, - GCT_R10_DISPLAY_DESC_SIZE * number_desc); - pGCT = vbt->mrst_gct; - pGCT = (u8 *)pGCT + (bpi*GCT_R10_DISPLAY_DESC_SIZE); - dev_priv->gct_data.bpi = bpi; /*save boot panel id*/ - - /*copy the GCT display timings into a temp structure*/ - memcpy(&ti, pGCT, sizeof(struct gct_r10_timing_info)); - - /*now copy the temp struct into the dev_priv->gct_data*/ - dp_ti->pixel_clock = ti.pixel_clock; - dp_ti->hactive_hi = ti.hactive_hi; - dp_ti->hactive_lo = ti.hactive_lo; - dp_ti->hblank_hi = ti.hblank_hi; - dp_ti->hblank_lo = ti.hblank_lo; - dp_ti->hsync_offset_hi = ti.hsync_offset_hi; - dp_ti->hsync_offset_lo = ti.hsync_offset_lo; - dp_ti->hsync_pulse_width_hi = ti.hsync_pulse_width_hi; - dp_ti->hsync_pulse_width_lo = ti.hsync_pulse_width_lo; - dp_ti->vactive_hi = ti.vactive_hi; - dp_ti->vactive_lo = ti.vactive_lo; - dp_ti->vblank_hi = ti.vblank_hi; - dp_ti->vblank_lo = ti.vblank_lo; - dp_ti->vsync_offset_hi = ti.vsync_offset_hi; - dp_ti->vsync_offset_lo = ti.vsync_offset_lo; - dp_ti->vsync_pulse_width_hi = ti.vsync_pulse_width_hi; - dp_ti->vsync_pulse_width_lo = ti.vsync_pulse_width_lo; - - /* Move the MIPI_Display_Descriptor data from GCT to dev priv */ - dev_priv->gct_data.Panel_MIPI_Display_Descriptor = - *((u8 *)pGCT + 0x0d); - dev_priv->gct_data.Panel_MIPI_Display_Descriptor |= - (*((u8 *)pGCT + 0x0e)) << 8; - break; - default: - dev_err(dev->dev, "Unknown revision of GCT!\n"); - vbt->size = 0; - } - if (IS_MFLD(dev_priv->dev)) { - if (panel_id == GCT_DETECT) { - if (dev_priv->gct_data.bpi == 2) { - dev_info(dev->dev, "[GFX] PYR Panel Detected\n"); - dev_priv->panel_id = PYR_CMD; - panel_id = PYR_CMD; - } else if (dev_priv->gct_data.bpi == 0) { - dev_info(dev->dev, "[GFX] TMD Panel Detected.\n"); - dev_priv->panel_id = TMD_VID; - panel_id = TMD_VID; - } else { - dev_info(dev->dev, "[GFX] Default Panel (TPO)\n"); - dev_priv->panel_id = TPO_CMD; - panel_id = TPO_CMD; - } - } else { - dev_info(dev->dev, "[GFX] Panel Parameter Passed in through cmd line\n"); - dev_priv->panel_id = panel_id; - } - } -} - -int mid_chip_setup(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - mid_get_fuse_settings(dev); - mid_get_vbt_data(dev_priv); - mid_get_pci_revID(dev_priv); - return 0; -} diff --git a/drivers/staging/gma500/mid_bios.h b/drivers/staging/gma500/mid_bios.h deleted file mode 100644 index 00e7d564b7eb..000000000000 --- a/drivers/staging/gma500/mid_bios.h +++ /dev/null @@ -1,21 +0,0 @@ -/************************************************************************** - * Copyright (c) 2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -extern int mid_chip_setup(struct drm_device *dev); - diff --git a/drivers/staging/gma500/mmu.c b/drivers/staging/gma500/mmu.c deleted file mode 100644 index c904d73b1de3..000000000000 --- a/drivers/staging/gma500/mmu.c +++ /dev/null @@ -1,858 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ -#include -#include "psb_drv.h" -#include "psb_reg.h" - -/* - * Code for the SGX MMU: - */ - -/* - * clflush on one processor only: - * clflush should apparently flush the cache line on all processors in an - * SMP system. - */ - -/* - * kmap atomic: - * The usage of the slots must be completely encapsulated within a spinlock, and - * no other functions that may be using the locks for other purposed may be - * called from within the locked region. - * Since the slots are per processor, this will guarantee that we are the only - * user. - */ - -/* - * TODO: Inserting ptes from an interrupt handler: - * This may be desirable for some SGX functionality where the GPU can fault in - * needed pages. For that, we need to make an atomic insert_pages function, that - * may fail. - * If it fails, the caller need to insert the page using a workqueue function, - * but on average it should be fast. - */ - -struct psb_mmu_driver { - /* protects driver- and pd structures. Always take in read mode - * before taking the page table spinlock. - */ - struct rw_semaphore sem; - - /* protects page tables, directory tables and pt tables. - * and pt structures. - */ - spinlock_t lock; - - atomic_t needs_tlbflush; - - uint8_t __iomem *register_map; - struct psb_mmu_pd *default_pd; - /*uint32_t bif_ctrl;*/ - int has_clflush; - int clflush_add; - unsigned long clflush_mask; - - struct drm_psb_private *dev_priv; -}; - -struct psb_mmu_pd; - -struct psb_mmu_pt { - struct psb_mmu_pd *pd; - uint32_t index; - uint32_t count; - struct page *p; - uint32_t *v; -}; - -struct psb_mmu_pd { - struct psb_mmu_driver *driver; - int hw_context; - struct psb_mmu_pt **tables; - struct page *p; - struct page *dummy_pt; - struct page *dummy_page; - uint32_t pd_mask; - uint32_t invalid_pde; - uint32_t invalid_pte; -}; - -static inline uint32_t psb_mmu_pt_index(uint32_t offset) -{ - return (offset >> PSB_PTE_SHIFT) & 0x3FF; -} - -static inline uint32_t psb_mmu_pd_index(uint32_t offset) -{ - return offset >> PSB_PDE_SHIFT; -} - -static inline void psb_clflush(void *addr) -{ - __asm__ __volatile__("clflush (%0)\n" : : "r"(addr) : "memory"); -} - -static inline void psb_mmu_clflush(struct psb_mmu_driver *driver, - void *addr) -{ - if (!driver->has_clflush) - return; - - mb(); - psb_clflush(addr); - mb(); -} - -static void psb_page_clflush(struct psb_mmu_driver *driver, struct page* page) -{ - uint32_t clflush_add = driver->clflush_add >> PAGE_SHIFT; - uint32_t clflush_count = PAGE_SIZE / clflush_add; - int i; - uint8_t *clf; - - clf = kmap_atomic(page, KM_USER0); - mb(); - for (i = 0; i < clflush_count; ++i) { - psb_clflush(clf); - clf += clflush_add; - } - mb(); - kunmap_atomic(clf, KM_USER0); -} - -static void psb_pages_clflush(struct psb_mmu_driver *driver, - struct page *page[], unsigned long num_pages) -{ - int i; - - if (!driver->has_clflush) - return ; - - for (i = 0; i < num_pages; i++) - psb_page_clflush(driver, *page++); -} - -static void psb_mmu_flush_pd_locked(struct psb_mmu_driver *driver, - int force) -{ - atomic_set(&driver->needs_tlbflush, 0); -} - -static void psb_mmu_flush_pd(struct psb_mmu_driver *driver, int force) -{ - down_write(&driver->sem); - psb_mmu_flush_pd_locked(driver, force); - up_write(&driver->sem); -} - -void psb_mmu_flush(struct psb_mmu_driver *driver, int rc_prot) -{ - if (rc_prot) - down_write(&driver->sem); - if (rc_prot) - up_write(&driver->sem); -} - -void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context) -{ - /*ttm_tt_cache_flush(&pd->p, 1);*/ - psb_pages_clflush(pd->driver, &pd->p, 1); - down_write(&pd->driver->sem); - wmb(); - psb_mmu_flush_pd_locked(pd->driver, 1); - pd->hw_context = hw_context; - up_write(&pd->driver->sem); - -} - -static inline unsigned long psb_pd_addr_end(unsigned long addr, - unsigned long end) -{ - - addr = (addr + PSB_PDE_MASK + 1) & ~PSB_PDE_MASK; - return (addr < end) ? addr : end; -} - -static inline uint32_t psb_mmu_mask_pte(uint32_t pfn, int type) -{ - uint32_t mask = PSB_PTE_VALID; - - if (type & PSB_MMU_CACHED_MEMORY) - mask |= PSB_PTE_CACHED; - if (type & PSB_MMU_RO_MEMORY) - mask |= PSB_PTE_RO; - if (type & PSB_MMU_WO_MEMORY) - mask |= PSB_PTE_WO; - - return (pfn << PAGE_SHIFT) | mask; -} - -struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver, - int trap_pagefaults, int invalid_type) -{ - struct psb_mmu_pd *pd = kmalloc(sizeof(*pd), GFP_KERNEL); - uint32_t *v; - int i; - - if (!pd) - return NULL; - - pd->p = alloc_page(GFP_DMA32); - if (!pd->p) - goto out_err1; - pd->dummy_pt = alloc_page(GFP_DMA32); - if (!pd->dummy_pt) - goto out_err2; - pd->dummy_page = alloc_page(GFP_DMA32); - if (!pd->dummy_page) - goto out_err3; - - if (!trap_pagefaults) { - pd->invalid_pde = - psb_mmu_mask_pte(page_to_pfn(pd->dummy_pt), - invalid_type); - pd->invalid_pte = - psb_mmu_mask_pte(page_to_pfn(pd->dummy_page), - invalid_type); - } else { - pd->invalid_pde = 0; - pd->invalid_pte = 0; - } - - v = kmap(pd->dummy_pt); - for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i) - v[i] = pd->invalid_pte; - - kunmap(pd->dummy_pt); - - v = kmap(pd->p); - for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i) - v[i] = pd->invalid_pde; - - kunmap(pd->p); - - clear_page(kmap(pd->dummy_page)); - kunmap(pd->dummy_page); - - pd->tables = vmalloc_user(sizeof(struct psb_mmu_pt *) * 1024); - if (!pd->tables) - goto out_err4; - - pd->hw_context = -1; - pd->pd_mask = PSB_PTE_VALID; - pd->driver = driver; - - return pd; - -out_err4: - __free_page(pd->dummy_page); -out_err3: - __free_page(pd->dummy_pt); -out_err2: - __free_page(pd->p); -out_err1: - kfree(pd); - return NULL; -} - -void psb_mmu_free_pt(struct psb_mmu_pt *pt) -{ - __free_page(pt->p); - kfree(pt); -} - -void psb_mmu_free_pagedir(struct psb_mmu_pd *pd) -{ - struct psb_mmu_driver *driver = pd->driver; - struct psb_mmu_pt *pt; - int i; - - down_write(&driver->sem); - if (pd->hw_context != -1) - psb_mmu_flush_pd_locked(driver, 1); - - /* Should take the spinlock here, but we don't need to do that - since we have the semaphore in write mode. */ - - for (i = 0; i < 1024; ++i) { - pt = pd->tables[i]; - if (pt) - psb_mmu_free_pt(pt); - } - - vfree(pd->tables); - __free_page(pd->dummy_page); - __free_page(pd->dummy_pt); - __free_page(pd->p); - kfree(pd); - up_write(&driver->sem); -} - -static struct psb_mmu_pt *psb_mmu_alloc_pt(struct psb_mmu_pd *pd) -{ - struct psb_mmu_pt *pt = kmalloc(sizeof(*pt), GFP_KERNEL); - void *v; - uint32_t clflush_add = pd->driver->clflush_add >> PAGE_SHIFT; - uint32_t clflush_count = PAGE_SIZE / clflush_add; - spinlock_t *lock = &pd->driver->lock; - uint8_t *clf; - uint32_t *ptes; - int i; - - if (!pt) - return NULL; - - pt->p = alloc_page(GFP_DMA32); - if (!pt->p) { - kfree(pt); - return NULL; - } - - spin_lock(lock); - - v = kmap_atomic(pt->p, KM_USER0); - clf = (uint8_t *) v; - ptes = (uint32_t *) v; - for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i) - *ptes++ = pd->invalid_pte; - - - if (pd->driver->has_clflush && pd->hw_context != -1) { - mb(); - for (i = 0; i < clflush_count; ++i) { - psb_clflush(clf); - clf += clflush_add; - } - mb(); - } - - kunmap_atomic(v, KM_USER0); - spin_unlock(lock); - - pt->count = 0; - pt->pd = pd; - pt->index = 0; - - return pt; -} - -struct psb_mmu_pt *psb_mmu_pt_alloc_map_lock(struct psb_mmu_pd *pd, - unsigned long addr) -{ - uint32_t index = psb_mmu_pd_index(addr); - struct psb_mmu_pt *pt; - uint32_t *v; - spinlock_t *lock = &pd->driver->lock; - - spin_lock(lock); - pt = pd->tables[index]; - while (!pt) { - spin_unlock(lock); - pt = psb_mmu_alloc_pt(pd); - if (!pt) - return NULL; - spin_lock(lock); - - if (pd->tables[index]) { - spin_unlock(lock); - psb_mmu_free_pt(pt); - spin_lock(lock); - pt = pd->tables[index]; - continue; - } - - v = kmap_atomic(pd->p, KM_USER0); - pd->tables[index] = pt; - v[index] = (page_to_pfn(pt->p) << 12) | pd->pd_mask; - pt->index = index; - kunmap_atomic((void *) v, KM_USER0); - - if (pd->hw_context != -1) { - psb_mmu_clflush(pd->driver, (void *) &v[index]); - atomic_set(&pd->driver->needs_tlbflush, 1); - } - } - pt->v = kmap_atomic(pt->p, KM_USER0); - return pt; -} - -static struct psb_mmu_pt *psb_mmu_pt_map_lock(struct psb_mmu_pd *pd, - unsigned long addr) -{ - uint32_t index = psb_mmu_pd_index(addr); - struct psb_mmu_pt *pt; - spinlock_t *lock = &pd->driver->lock; - - spin_lock(lock); - pt = pd->tables[index]; - if (!pt) { - spin_unlock(lock); - return NULL; - } - pt->v = kmap_atomic(pt->p, KM_USER0); - return pt; -} - -static void psb_mmu_pt_unmap_unlock(struct psb_mmu_pt *pt) -{ - struct psb_mmu_pd *pd = pt->pd; - uint32_t *v; - - kunmap_atomic(pt->v, KM_USER0); - if (pt->count == 0) { - v = kmap_atomic(pd->p, KM_USER0); - v[pt->index] = pd->invalid_pde; - pd->tables[pt->index] = NULL; - - if (pd->hw_context != -1) { - psb_mmu_clflush(pd->driver, - (void *) &v[pt->index]); - atomic_set(&pd->driver->needs_tlbflush, 1); - } - kunmap_atomic(pt->v, KM_USER0); - spin_unlock(&pd->driver->lock); - psb_mmu_free_pt(pt); - return; - } - spin_unlock(&pd->driver->lock); -} - -static inline void psb_mmu_set_pte(struct psb_mmu_pt *pt, - unsigned long addr, uint32_t pte) -{ - pt->v[psb_mmu_pt_index(addr)] = pte; -} - -static inline void psb_mmu_invalidate_pte(struct psb_mmu_pt *pt, - unsigned long addr) -{ - pt->v[psb_mmu_pt_index(addr)] = pt->pd->invalid_pte; -} - - -void psb_mmu_mirror_gtt(struct psb_mmu_pd *pd, - uint32_t mmu_offset, uint32_t gtt_start, - uint32_t gtt_pages) -{ - uint32_t *v; - uint32_t start = psb_mmu_pd_index(mmu_offset); - struct psb_mmu_driver *driver = pd->driver; - int num_pages = gtt_pages; - - down_read(&driver->sem); - spin_lock(&driver->lock); - - v = kmap_atomic(pd->p, KM_USER0); - v += start; - - while (gtt_pages--) { - *v++ = gtt_start | pd->pd_mask; - gtt_start += PAGE_SIZE; - } - - /*ttm_tt_cache_flush(&pd->p, num_pages);*/ - psb_pages_clflush(pd->driver, &pd->p, num_pages); - kunmap_atomic(v, KM_USER0); - spin_unlock(&driver->lock); - - if (pd->hw_context != -1) - atomic_set(&pd->driver->needs_tlbflush, 1); - - up_read(&pd->driver->sem); - psb_mmu_flush_pd(pd->driver, 0); -} - -struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver *driver) -{ - struct psb_mmu_pd *pd; - - /* down_read(&driver->sem); */ - pd = driver->default_pd; - /* up_read(&driver->sem); */ - - return pd; -} - -/* Returns the physical address of the PD shared by sgx/msvdx */ -uint32_t psb_get_default_pd_addr(struct psb_mmu_driver *driver) -{ - struct psb_mmu_pd *pd; - - pd = psb_mmu_get_default_pd(driver); - return page_to_pfn(pd->p) << PAGE_SHIFT; -} - -void psb_mmu_driver_takedown(struct psb_mmu_driver *driver) -{ - psb_mmu_free_pagedir(driver->default_pd); - kfree(driver); -} - -struct psb_mmu_driver *psb_mmu_driver_init(uint8_t __iomem * registers, - int trap_pagefaults, - int invalid_type, - struct drm_psb_private *dev_priv) -{ - struct psb_mmu_driver *driver; - - driver = kmalloc(sizeof(*driver), GFP_KERNEL); - - if (!driver) - return NULL; - driver->dev_priv = dev_priv; - - driver->default_pd = psb_mmu_alloc_pd(driver, trap_pagefaults, - invalid_type); - if (!driver->default_pd) - goto out_err1; - - spin_lock_init(&driver->lock); - init_rwsem(&driver->sem); - down_write(&driver->sem); - driver->register_map = registers; - atomic_set(&driver->needs_tlbflush, 1); - - driver->has_clflush = 0; - - if (boot_cpu_has(X86_FEATURE_CLFLSH)) { - uint32_t tfms, misc, cap0, cap4, clflush_size; - - /* - * clflush size is determined at kernel setup for x86_64 - * but not for i386. We have to do it here. - */ - - cpuid(0x00000001, &tfms, &misc, &cap0, &cap4); - clflush_size = ((misc >> 8) & 0xff) * 8; - driver->has_clflush = 1; - driver->clflush_add = - PAGE_SIZE * clflush_size / sizeof(uint32_t); - driver->clflush_mask = driver->clflush_add - 1; - driver->clflush_mask = ~driver->clflush_mask; - } - - up_write(&driver->sem); - return driver; - -out_err1: - kfree(driver); - return NULL; -} - -static void psb_mmu_flush_ptes(struct psb_mmu_pd *pd, - unsigned long address, uint32_t num_pages, - uint32_t desired_tile_stride, - uint32_t hw_tile_stride) -{ - struct psb_mmu_pt *pt; - uint32_t rows = 1; - uint32_t i; - unsigned long addr; - unsigned long end; - unsigned long next; - unsigned long add; - unsigned long row_add; - unsigned long clflush_add = pd->driver->clflush_add; - unsigned long clflush_mask = pd->driver->clflush_mask; - - if (!pd->driver->has_clflush) { - /*ttm_tt_cache_flush(&pd->p, num_pages);*/ - psb_pages_clflush(pd->driver, &pd->p, num_pages); - return; - } - - if (hw_tile_stride) - rows = num_pages / desired_tile_stride; - else - desired_tile_stride = num_pages; - - add = desired_tile_stride << PAGE_SHIFT; - row_add = hw_tile_stride << PAGE_SHIFT; - mb(); - for (i = 0; i < rows; ++i) { - - addr = address; - end = addr + add; - - do { - next = psb_pd_addr_end(addr, end); - pt = psb_mmu_pt_map_lock(pd, addr); - if (!pt) - continue; - do { - psb_clflush(&pt->v - [psb_mmu_pt_index(addr)]); - } while (addr += - clflush_add, - (addr & clflush_mask) < next); - - psb_mmu_pt_unmap_unlock(pt); - } while (addr = next, next != end); - address += row_add; - } - mb(); -} - -void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd, - unsigned long address, uint32_t num_pages) -{ - struct psb_mmu_pt *pt; - unsigned long addr; - unsigned long end; - unsigned long next; - unsigned long f_address = address; - - down_read(&pd->driver->sem); - - addr = address; - end = addr + (num_pages << PAGE_SHIFT); - - do { - next = psb_pd_addr_end(addr, end); - pt = psb_mmu_pt_alloc_map_lock(pd, addr); - if (!pt) - goto out; - do { - psb_mmu_invalidate_pte(pt, addr); - --pt->count; - } while (addr += PAGE_SIZE, addr < next); - psb_mmu_pt_unmap_unlock(pt); - - } while (addr = next, next != end); - -out: - if (pd->hw_context != -1) - psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1); - - up_read(&pd->driver->sem); - - if (pd->hw_context != -1) - psb_mmu_flush(pd->driver, 0); - - return; -} - -void psb_mmu_remove_pages(struct psb_mmu_pd *pd, unsigned long address, - uint32_t num_pages, uint32_t desired_tile_stride, - uint32_t hw_tile_stride) -{ - struct psb_mmu_pt *pt; - uint32_t rows = 1; - uint32_t i; - unsigned long addr; - unsigned long end; - unsigned long next; - unsigned long add; - unsigned long row_add; - unsigned long f_address = address; - - if (hw_tile_stride) - rows = num_pages / desired_tile_stride; - else - desired_tile_stride = num_pages; - - add = desired_tile_stride << PAGE_SHIFT; - row_add = hw_tile_stride << PAGE_SHIFT; - - /* down_read(&pd->driver->sem); */ - - /* Make sure we only need to flush this processor's cache */ - - for (i = 0; i < rows; ++i) { - - addr = address; - end = addr + add; - - do { - next = psb_pd_addr_end(addr, end); - pt = psb_mmu_pt_map_lock(pd, addr); - if (!pt) - continue; - do { - psb_mmu_invalidate_pte(pt, addr); - --pt->count; - - } while (addr += PAGE_SIZE, addr < next); - psb_mmu_pt_unmap_unlock(pt); - - } while (addr = next, next != end); - address += row_add; - } - if (pd->hw_context != -1) - psb_mmu_flush_ptes(pd, f_address, num_pages, - desired_tile_stride, hw_tile_stride); - - /* up_read(&pd->driver->sem); */ - - if (pd->hw_context != -1) - psb_mmu_flush(pd->driver, 0); -} - -int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd, uint32_t start_pfn, - unsigned long address, uint32_t num_pages, - int type) -{ - struct psb_mmu_pt *pt; - uint32_t pte; - unsigned long addr; - unsigned long end; - unsigned long next; - unsigned long f_address = address; - int ret = 0; - - down_read(&pd->driver->sem); - - addr = address; - end = addr + (num_pages << PAGE_SHIFT); - - do { - next = psb_pd_addr_end(addr, end); - pt = psb_mmu_pt_alloc_map_lock(pd, addr); - if (!pt) { - ret = -ENOMEM; - goto out; - } - do { - pte = psb_mmu_mask_pte(start_pfn++, type); - psb_mmu_set_pte(pt, addr, pte); - pt->count++; - } while (addr += PAGE_SIZE, addr < next); - psb_mmu_pt_unmap_unlock(pt); - - } while (addr = next, next != end); - -out: - if (pd->hw_context != -1) - psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1); - - up_read(&pd->driver->sem); - - if (pd->hw_context != -1) - psb_mmu_flush(pd->driver, 1); - - return ret; -} - -int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages, - unsigned long address, uint32_t num_pages, - uint32_t desired_tile_stride, - uint32_t hw_tile_stride, int type) -{ - struct psb_mmu_pt *pt; - uint32_t rows = 1; - uint32_t i; - uint32_t pte; - unsigned long addr; - unsigned long end; - unsigned long next; - unsigned long add; - unsigned long row_add; - unsigned long f_address = address; - int ret = 0; - - if (hw_tile_stride) { - if (num_pages % desired_tile_stride != 0) - return -EINVAL; - rows = num_pages / desired_tile_stride; - } else { - desired_tile_stride = num_pages; - } - - add = desired_tile_stride << PAGE_SHIFT; - row_add = hw_tile_stride << PAGE_SHIFT; - - down_read(&pd->driver->sem); - - for (i = 0; i < rows; ++i) { - - addr = address; - end = addr + add; - - do { - next = psb_pd_addr_end(addr, end); - pt = psb_mmu_pt_alloc_map_lock(pd, addr); - if (!pt) { - ret = -ENOMEM; - goto out; - } - do { - pte = - psb_mmu_mask_pte(page_to_pfn(*pages++), - type); - psb_mmu_set_pte(pt, addr, pte); - pt->count++; - } while (addr += PAGE_SIZE, addr < next); - psb_mmu_pt_unmap_unlock(pt); - - } while (addr = next, next != end); - - address += row_add; - } -out: - if (pd->hw_context != -1) - psb_mmu_flush_ptes(pd, f_address, num_pages, - desired_tile_stride, hw_tile_stride); - - up_read(&pd->driver->sem); - - if (pd->hw_context != -1) - psb_mmu_flush(pd->driver, 1); - - return ret; -} - -int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual, - unsigned long *pfn) -{ - int ret; - struct psb_mmu_pt *pt; - uint32_t tmp; - spinlock_t *lock = &pd->driver->lock; - - down_read(&pd->driver->sem); - pt = psb_mmu_pt_map_lock(pd, virtual); - if (!pt) { - uint32_t *v; - - spin_lock(lock); - v = kmap_atomic(pd->p, KM_USER0); - tmp = v[psb_mmu_pd_index(virtual)]; - kunmap_atomic(v, KM_USER0); - spin_unlock(lock); - - if (tmp != pd->invalid_pde || !(tmp & PSB_PTE_VALID) || - !(pd->invalid_pte & PSB_PTE_VALID)) { - ret = -EINVAL; - goto out; - } - ret = 0; - *pfn = pd->invalid_pte >> PAGE_SHIFT; - goto out; - } - tmp = pt->v[psb_mmu_pt_index(virtual)]; - if (!(tmp & PSB_PTE_VALID)) { - ret = -EINVAL; - } else { - ret = 0; - *pfn = tmp >> PAGE_SHIFT; - } - psb_mmu_pt_unmap_unlock(pt); -out: - up_read(&pd->driver->sem); - return ret; -} diff --git a/drivers/staging/gma500/mrst.h b/drivers/staging/gma500/mrst.h deleted file mode 100644 index b563dbc73104..000000000000 --- a/drivers/staging/gma500/mrst.h +++ /dev/null @@ -1,252 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007-2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -/* MID device specific descriptors */ - -struct mrst_vbt { - s8 signature[4]; /*4 bytes,"$GCT" */ - u8 revision; - u8 size; - u8 checksum; - void *mrst_gct; -} __packed; - -struct mrst_timing_info { - u16 pixel_clock; - u8 hactive_lo; - u8 hblank_lo; - u8 hblank_hi:4; - u8 hactive_hi:4; - u8 vactive_lo; - u8 vblank_lo; - u8 vblank_hi:4; - u8 vactive_hi:4; - u8 hsync_offset_lo; - u8 hsync_pulse_width_lo; - u8 vsync_pulse_width_lo:4; - u8 vsync_offset_lo:4; - u8 vsync_pulse_width_hi:2; - u8 vsync_offset_hi:2; - u8 hsync_pulse_width_hi:2; - u8 hsync_offset_hi:2; - u8 width_mm_lo; - u8 height_mm_lo; - u8 height_mm_hi:4; - u8 width_mm_hi:4; - u8 hborder; - u8 vborder; - u8 unknown0:1; - u8 hsync_positive:1; - u8 vsync_positive:1; - u8 separate_sync:2; - u8 stereo:1; - u8 unknown6:1; - u8 interlaced:1; -} __packed; - -struct gct_r10_timing_info { - u16 pixel_clock; - u32 hactive_lo:8; - u32 hactive_hi:4; - u32 hblank_lo:8; - u32 hblank_hi:4; - u32 hsync_offset_lo:8; - u16 hsync_offset_hi:2; - u16 hsync_pulse_width_lo:8; - u16 hsync_pulse_width_hi:2; - u16 hsync_positive:1; - u16 rsvd_1:3; - u8 vactive_lo:8; - u16 vactive_hi:4; - u16 vblank_lo:8; - u16 vblank_hi:4; - u16 vsync_offset_lo:4; - u16 vsync_offset_hi:2; - u16 vsync_pulse_width_lo:4; - u16 vsync_pulse_width_hi:2; - u16 vsync_positive:1; - u16 rsvd_2:3; -} __packed; - -struct mrst_panel_descriptor_v1 { - u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */ - /* 0x61190 if MIPI */ - u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/ - u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/ - u32 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */ - /* Register 0x61210 */ - struct mrst_timing_info DTD;/*18 bytes, Standard definition */ - u16 Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */ - /* Bit 0, Frequency, 15 bits,0 - 32767Hz */ - /* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */ - u16 Panel_MIPI_Display_Descriptor; - /*16 bits, Defined as follows: */ - /* if MIPI, 0x0000 if LVDS */ - /* Bit 0, Type, 2 bits, */ - /* 0: Type-1, */ - /* 1: Type-2, */ - /* 2: Type-3, */ - /* 3: Type-4 */ - /* Bit 2, Pixel Format, 4 bits */ - /* Bit0: 16bpp (not supported in LNC), */ - /* Bit1: 18bpp loosely packed, */ - /* Bit2: 18bpp packed, */ - /* Bit3: 24bpp */ - /* Bit 6, Reserved, 2 bits, 00b */ - /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */ - /* Bit 14, Reserved, 2 bits, 00b */ -} __packed; - -struct mrst_panel_descriptor_v2 { - u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */ - /* 0x61190 if MIPI */ - u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/ - u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/ - u8 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */ - /* Register 0x61210 */ - struct mrst_timing_info DTD;/*18 bytes, Standard definition */ - u16 Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/ - /*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/ - u8 Panel_Initial_Brightness;/* [7:0] 0 - 100% */ - /*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/ - u16 Panel_MIPI_Display_Descriptor; - /*16 bits, Defined as follows: */ - /* if MIPI, 0x0000 if LVDS */ - /* Bit 0, Type, 2 bits, */ - /* 0: Type-1, */ - /* 1: Type-2, */ - /* 2: Type-3, */ - /* 3: Type-4 */ - /* Bit 2, Pixel Format, 4 bits */ - /* Bit0: 16bpp (not supported in LNC), */ - /* Bit1: 18bpp loosely packed, */ - /* Bit2: 18bpp packed, */ - /* Bit3: 24bpp */ - /* Bit 6, Reserved, 2 bits, 00b */ - /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */ - /* Bit 14, Reserved, 2 bits, 00b */ -} __packed; - -union mrst_panel_rx { - struct { - u16 NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/ - /* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */ - u16 MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */ - /*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/ - u16 SupportedVideoTransferMode:2; /*0: Non-burst only */ - /* 1: Burst and non-burst */ - /* 2/3: Reserved */ - u16 HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/ - u16 DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/ - u16 ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/ - u16 BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */ - u16 Rsvd:5;/*5 bits,00000b */ - } panelrx; - u16 panel_receiver; -} __packed; - -struct mrst_gct_v1 { - union { /*8 bits,Defined as follows: */ - struct { - u8 PanelType:4; /*4 bits, Bit field for panels*/ - /* 0 - 3: 0 = LVDS, 1 = MIPI*/ - /*2 bits,Specifies which of the*/ - u8 BootPanelIndex:2; - /* 4 panels to use by default*/ - u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/ - /* the 4 MIPI DSI receivers to use*/ - } PD; - u8 PanelDescriptor; - }; - struct mrst_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/ - union mrst_panel_rx panelrx[4]; /* panel receivers*/ -} __packed; - -struct mrst_gct_v2 { - union { /*8 bits,Defined as follows: */ - struct { - u8 PanelType:4; /*4 bits, Bit field for panels*/ - /* 0 - 3: 0 = LVDS, 1 = MIPI*/ - /*2 bits,Specifies which of the*/ - u8 BootPanelIndex:2; - /* 4 panels to use by default*/ - u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/ - /* the 4 MIPI DSI receivers to use*/ - } PD; - u8 PanelDescriptor; - }; - struct mrst_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/ - union mrst_panel_rx panelrx[4]; /* panel receivers*/ -} __packed; - -struct mrst_gct_data { - u8 bpi; /* boot panel index, number of panel used during boot */ - u8 pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */ - struct mrst_timing_info DTD; /* timing info for the selected panel */ - u32 Panel_Port_Control; - u32 PP_On_Sequencing;/*1 dword,Register 0x61208,*/ - u32 PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/ - u32 PP_Cycle_Delay; - u16 Panel_Backlight_Inverter_Descriptor; - u16 Panel_MIPI_Display_Descriptor; -} __packed; - -#define MODE_SETTING_IN_CRTC 0x1 -#define MODE_SETTING_IN_ENCODER 0x2 -#define MODE_SETTING_ON_GOING 0x3 -#define MODE_SETTING_IN_DSR 0x4 -#define MODE_SETTING_ENCODER_DONE 0x8 - -#define GCT_R10_HEADER_SIZE 16 -#define GCT_R10_DISPLAY_DESC_SIZE 28 - -/* - * Moorestown HDMI interfaces - */ - -struct mrst_hdmi_dev { - struct pci_dev *dev; - void __iomem *regs; - unsigned int mmio, mmio_len; - int dpms_mode; - struct hdmi_i2c_dev *i2c_dev; - - /* register state */ - u32 saveDPLL_CTRL; - u32 saveDPLL_DIV_CTRL; - u32 saveDPLL_ADJUST; - u32 saveDPLL_UPDATE; - u32 saveDPLL_CLK_ENABLE; - u32 savePCH_HTOTAL_B; - u32 savePCH_HBLANK_B; - u32 savePCH_HSYNC_B; - u32 savePCH_VTOTAL_B; - u32 savePCH_VBLANK_B; - u32 savePCH_VSYNC_B; - u32 savePCH_PIPEBCONF; - u32 savePCH_PIPEBSRC; -}; - -extern void mrst_hdmi_setup(struct drm_device *dev); -extern void mrst_hdmi_teardown(struct drm_device *dev); -extern int mrst_hdmi_i2c_init(struct pci_dev *dev); -extern void mrst_hdmi_i2c_exit(struct pci_dev *dev); -extern void mrst_hdmi_save(struct drm_device *dev); -extern void mrst_hdmi_restore(struct drm_device *dev); -extern void mrst_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev); diff --git a/drivers/staging/gma500/mrst_crtc.c b/drivers/staging/gma500/mrst_crtc.c deleted file mode 100644 index 980837e37d80..000000000000 --- a/drivers/staging/gma500/mrst_crtc.c +++ /dev/null @@ -1,604 +0,0 @@ -/* - * Copyright © 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include - -#include -#include "framebuffer.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "psb_intel_display.h" -#include "power.h" - -struct psb_intel_range_t { - int min, max; -}; - -struct mrst_limit_t { - struct psb_intel_range_t dot, m, p1; -}; - -struct mrst_clock_t { - /* derived values */ - int dot; - int m; - int p1; -}; - -#define MRST_LIMIT_LVDS_100L 0 -#define MRST_LIMIT_LVDS_83 1 -#define MRST_LIMIT_LVDS_100 2 - -#define MRST_DOT_MIN 19750 -#define MRST_DOT_MAX 120000 -#define MRST_M_MIN_100L 20 -#define MRST_M_MIN_100 10 -#define MRST_M_MIN_83 12 -#define MRST_M_MAX_100L 34 -#define MRST_M_MAX_100 17 -#define MRST_M_MAX_83 20 -#define MRST_P1_MIN 2 -#define MRST_P1_MAX_0 7 -#define MRST_P1_MAX_1 8 - -static const struct mrst_limit_t mrst_limits[] = { - { /* MRST_LIMIT_LVDS_100L */ - .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, - .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L}, - .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1}, - }, - { /* MRST_LIMIT_LVDS_83L */ - .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, - .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83}, - .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0}, - }, - { /* MRST_LIMIT_LVDS_100 */ - .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, - .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100}, - .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1}, - }, -}; - -#define MRST_M_MIN 10 -static const u32 mrst_m_converts[] = { - 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C, - 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25, - 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c, -}; - -static const struct mrst_limit_t *mrst_limit(struct drm_crtc *crtc) -{ - const struct mrst_limit_t *limit = NULL; - struct drm_device *dev = crtc->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) - || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) { - switch (dev_priv->core_freq) { - case 100: - limit = &mrst_limits[MRST_LIMIT_LVDS_100L]; - break; - case 166: - limit = &mrst_limits[MRST_LIMIT_LVDS_83]; - break; - case 200: - limit = &mrst_limits[MRST_LIMIT_LVDS_100]; - break; - } - } else { - limit = NULL; - dev_err(dev->dev, "mrst_limit Wrong display type.\n"); - } - - return limit; -} - -/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ -static void mrst_clock(int refclk, struct mrst_clock_t *clock) -{ - clock->dot = (refclk * clock->m) / (14 * clock->p1); -} - -void mrstPrintPll(char *prefix, struct mrst_clock_t *clock) -{ - pr_debug("%s: dotclock = %d, m = %d, p1 = %d.\n", - prefix, clock->dot, clock->m, clock->p1); -} - -/** - * Returns a set of divisors for the desired target clock with the given refclk, - * or FALSE. Divisor values are the actual divisors for - */ -static bool -mrstFindBestPLL(struct drm_crtc *crtc, int target, int refclk, - struct mrst_clock_t *best_clock) -{ - struct mrst_clock_t clock; - const struct mrst_limit_t *limit = mrst_limit(crtc); - int err = target; - - memset(best_clock, 0, sizeof(*best_clock)); - - for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) { - for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; - clock.p1++) { - int this_err; - - mrst_clock(refclk, &clock); - - this_err = abs(clock.dot - target); - if (this_err < err) { - *best_clock = clock; - err = this_err; - } - } - } - dev_dbg(crtc->dev->dev, "mrstFindBestPLL err = %d.\n", err); - return err != target; -} - -/** - * Sets the power management mode of the pipe and plane. - * - * This code should probably grow support for turning the cursor off and back - * on appropriately at the same time as we're turning the pipe off/on. - */ -static void mrst_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (pipe == 0) ? MRST_DSPABASE : DSPBBASE; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - u32 temp; - bool enabled; - - if (!gma_power_begin(dev, true)) - return; - - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - /* Enable the DPLL */ - temp = REG_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) == 0) { - REG_WRITE(dpll_reg, temp); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - } - /* Enable the pipe */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) == 0) - REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); - /* Enable the plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - REG_WRITE(dspcntr_reg, - temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - } - - psb_intel_crtc_load_lut(crtc); - - /* Give the overlay scaler a chance to enable - if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, true); TODO */ - break; - case DRM_MODE_DPMS_OFF: - /* Give the overlay scaler a chance to disable - * if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - /* Disable display plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(dspcntr_reg, - temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - REG_READ(dspbase_reg); - } - - /* Next, disable display pipes */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); - REG_READ(pipeconf_reg); - } - /* Wait for for the pipe disable to take effect. */ - psb_intel_wait_for_vblank(dev); - - temp = REG_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) != 0) { - REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - } - - /* Wait for the clocks to turn off. */ - udelay(150); - break; - } - - enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; - - /*Set FIFO Watermarks*/ - REG_WRITE(DSPARB, 0x3FFF); - REG_WRITE(DSPFW1, 0x3F88080A); - REG_WRITE(DSPFW2, 0x0b060808); - REG_WRITE(DSPFW3, 0x0); - REG_WRITE(DSPFW4, 0x08030404); - REG_WRITE(DSPFW5, 0x04040404); - REG_WRITE(DSPFW6, 0x78); - REG_WRITE(0x70400, REG_READ(0x70400) | 0x4000); - /* Must write Bit 14 of the Chicken Bit Register */ - - gma_power_end(dev); -} - -/** - * Return the pipe currently connected to the panel fitter, - * or -1 if the panel fitter is not present or not in use - */ -static int mrst_panel_fitter_pipe(struct drm_device *dev) -{ - u32 pfit_control; - - pfit_control = REG_READ(PFIT_CONTROL); - - /* See if the panel fitter is in use */ - if ((pfit_control & PFIT_ENABLE) == 0) - return -1; - return (pfit_control >> 29) & 3; -} - -static int mrst_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct drm_psb_private *dev_priv = dev->dev_private; - int pipe = psb_intel_crtc->pipe; - int fp_reg = (pipe == 0) ? MRST_FPA0 : FPB0; - int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; - int refclk = 0; - struct mrst_clock_t clock; - u32 dpll = 0, fp = 0, dspcntr, pipeconf; - bool ok, is_sdvo = false; - bool is_crt = false, is_lvds = false, is_tv = false; - bool is_mipi = false; - struct drm_mode_config *mode_config = &dev->mode_config; - struct psb_intel_output *psb_intel_output = NULL; - uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN; - struct drm_encoder *encoder; - - if (!gma_power_begin(dev, true)) - return 0; - - memcpy(&psb_intel_crtc->saved_mode, - mode, - sizeof(struct drm_display_mode)); - memcpy(&psb_intel_crtc->saved_adjusted_mode, - adjusted_mode, - sizeof(struct drm_display_mode)); - - list_for_each_entry(encoder, &mode_config->encoder_list, head) { - - if (encoder->crtc != crtc) - continue; - - psb_intel_output = enc_to_psb_intel_output(encoder); - switch (psb_intel_output->type) { - case INTEL_OUTPUT_LVDS: - is_lvds = true; - break; - case INTEL_OUTPUT_SDVO: - is_sdvo = true; - break; - case INTEL_OUTPUT_TVOUT: - is_tv = true; - break; - case INTEL_OUTPUT_ANALOG: - is_crt = true; - break; - case INTEL_OUTPUT_MIPI: - is_mipi = true; - break; - } - } - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - - /* Disable the panel fitter if it was on our pipe */ - if (mrst_panel_fitter_pipe(dev) == pipe) - REG_WRITE(PFIT_CONTROL, 0); - - REG_WRITE(pipesrc_reg, - ((mode->crtc_hdisplay - 1) << 16) | - (mode->crtc_vdisplay - 1)); - - if (psb_intel_output) - drm_connector_property_get_value(&psb_intel_output->base, - dev->mode_config.scaling_mode_property, &scalingType); - - if (scalingType == DRM_MODE_SCALE_NO_SCALE) { - /* Moorestown doesn't have register support for centering so - * we need to mess with the h/vblank and h/vsync start and - * ends to get centering */ - int offsetX = 0, offsetY = 0; - - offsetX = (adjusted_mode->crtc_hdisplay - - mode->crtc_hdisplay) / 2; - offsetY = (adjusted_mode->crtc_vdisplay - - mode->crtc_vdisplay) / 2; - - REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) | - ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(hblank_reg, - (adjusted_mode->crtc_hblank_start - offsetX - 1) | - ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16)); - REG_WRITE(hsync_reg, - (adjusted_mode->crtc_hsync_start - offsetX - 1) | - ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16)); - REG_WRITE(vblank_reg, - (adjusted_mode->crtc_vblank_start - offsetY - 1) | - ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16)); - REG_WRITE(vsync_reg, - (adjusted_mode->crtc_vsync_start - offsetY - 1) | - ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16)); - } else { - REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | - ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | - ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | - ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | - ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | - ((adjusted_mode->crtc_vsync_end - 1) << 16)); - } - - /* Flush the plane changes */ - { - struct drm_crtc_helper_funcs *crtc_funcs = - crtc->helper_private; - crtc_funcs->mode_set_base(crtc, x, y, old_fb); - } - - /* setup pipeconf */ - pipeconf = REG_READ(pipeconf_reg); - - /* Set up the display plane register */ - dspcntr = REG_READ(dspcntr_reg); - dspcntr |= DISPPLANE_GAMMA_ENABLE; - - if (pipe == 0) - dspcntr |= DISPPLANE_SEL_PIPE_A; - else - dspcntr |= DISPPLANE_SEL_PIPE_B; - - dev_priv->dspcntr = dspcntr |= DISPLAY_PLANE_ENABLE; - dev_priv->pipeconf = pipeconf |= PIPEACONF_ENABLE; - - if (is_mipi) - goto mrst_crtc_mode_set_exit; - - refclk = dev_priv->core_freq * 1000; - - dpll = 0; /*BIT16 = 0 for 100MHz reference */ - - ok = mrstFindBestPLL(crtc, adjusted_mode->clock, refclk, &clock); - - if (!ok) { - dev_dbg(dev->dev, "mrstFindBestPLL fail in mrst_crtc_mode_set.\n"); - } else { - dev_dbg(dev->dev, "mrst_crtc_mode_set pixel clock = %d," - "m = %x, p1 = %x.\n", clock.dot, clock.m, - clock.p1); - } - - fp = mrst_m_converts[(clock.m - MRST_M_MIN)] << 8; - - dpll |= DPLL_VGA_MODE_DIS; - - - dpll |= DPLL_VCO_ENABLE; - - if (is_lvds) - dpll |= DPLLA_MODE_LVDS; - else - dpll |= DPLLB_MODE_DAC_SERIAL; - - if (is_sdvo) { - int sdvo_pixel_multiply = - adjusted_mode->clock / mode->clock; - - dpll |= DPLL_DVO_HIGH_SPEED; - dpll |= - (sdvo_pixel_multiply - - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; - } - - - /* compute bitmask from p1 value */ - dpll |= (1 << (clock.p1 - 2)) << 17; - - dpll |= DPLL_VCO_ENABLE; - - mrstPrintPll("chosen", &clock); - - if (dpll & DPLL_VCO_ENABLE) { - REG_WRITE(fp_reg, fp); - REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - /* Check the DPLLA lock bit PIPEACONF[29] */ - udelay(150); - } - - REG_WRITE(fp_reg, fp); - REG_WRITE(dpll_reg, dpll); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - - /* write it again -- the BIOS does, after all */ - REG_WRITE(dpll_reg, dpll); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - - REG_WRITE(pipeconf_reg, pipeconf); - REG_READ(pipeconf_reg); - psb_intel_wait_for_vblank(dev); - - REG_WRITE(dspcntr_reg, dspcntr); - psb_intel_wait_for_vblank(dev); - -mrst_crtc_mode_set_exit: - gma_power_end(dev); - return 0; -} - -static bool mrst_crtc_mode_fixup(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - return true; -} - -int mrst_pipe_set_base(struct drm_crtc *crtc, - int x, int y, struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); - int pipe = psb_intel_crtc->pipe; - unsigned long start, offset; - - int dspbase = (pipe == 0 ? DSPALINOFF : DSPBBASE); - int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); - int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - u32 dspcntr; - int ret = 0; - - /* no fb bound */ - if (!crtc->fb) { - dev_dbg(dev->dev, "No FB bound\n"); - return 0; - } - - if (!gma_power_begin(dev, true)) - return 0; - - start = psbfb->gtt->offset; - offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8); - - REG_WRITE(dspstride, crtc->fb->pitches[0]); - - dspcntr = REG_READ(dspcntr_reg); - dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; - - switch (crtc->fb->bits_per_pixel) { - case 8: - dspcntr |= DISPPLANE_8BPP; - break; - case 16: - if (crtc->fb->depth == 15) - dspcntr |= DISPPLANE_15_16BPP; - else - dspcntr |= DISPPLANE_16BPP; - break; - case 24: - case 32: - dspcntr |= DISPPLANE_32BPP_NO_ALPHA; - break; - default: - dev_err(dev->dev, "Unknown color depth\n"); - ret = -EINVAL; - goto pipe_set_base_exit; - } - REG_WRITE(dspcntr_reg, dspcntr); - - REG_WRITE(dspbase, offset); - REG_READ(dspbase); - REG_WRITE(dspsurf, start); - REG_READ(dspsurf); - -pipe_set_base_exit: - gma_power_end(dev); - return ret; -} - -static void mrst_crtc_prepare(struct drm_crtc *crtc) -{ - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); -} - -static void mrst_crtc_commit(struct drm_crtc *crtc) -{ - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); -} - -const struct drm_crtc_helper_funcs mrst_helper_funcs = { - .dpms = mrst_crtc_dpms, - .mode_fixup = mrst_crtc_mode_fixup, - .mode_set = mrst_crtc_mode_set, - .mode_set_base = mrst_pipe_set_base, - .prepare = mrst_crtc_prepare, - .commit = mrst_crtc_commit, -}; - diff --git a/drivers/staging/gma500/mrst_device.c b/drivers/staging/gma500/mrst_device.c deleted file mode 100644 index 6707fafbfa1e..000000000000 --- a/drivers/staging/gma500/mrst_device.c +++ /dev/null @@ -1,634 +0,0 @@ -/************************************************************************** - * Copyright (c) 2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#include -#include -#include -#include -#include -#include "psb_drm.h" -#include "psb_drv.h" -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include -#include -#include "mid_bios.h" - -static int devtype; - -module_param_named(type, devtype, int, 0600); -MODULE_PARM_DESC(type, "Moorestown/Oaktrail device type"); - -#define DEVICE_MOORESTOWN 1 -#define DEVICE_OAKTRAIL 2 -#define DEVICE_MOORESTOWN_MM 3 - -static int mrst_device_ident(struct drm_device *dev) -{ - /* User forced */ - if (devtype) - return devtype; - if (dmi_match(DMI_PRODUCT_NAME, "OakTrail") || - dmi_match(DMI_PRODUCT_NAME, "OakTrail platform")) - return DEVICE_OAKTRAIL; -#if defined(CONFIG_X86_MRST) - if (dmi_match(DMI_PRODUCT_NAME, "MM") || - dmi_match(DMI_PRODUCT_NAME, "MM 10")) - return DEVICE_MOORESTOWN_MM; - if (mrst_identify_cpu()) - return DEVICE_MOORESTOWN; -#endif - return DEVICE_OAKTRAIL; -} - - -/* IPC message and command defines used to enable/disable mipi panel voltages */ -#define IPC_MSG_PANEL_ON_OFF 0xE9 -#define IPC_CMD_PANEL_ON 1 -#define IPC_CMD_PANEL_OFF 0 - -static int mrst_output_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - if (dev_priv->iLVDS_enable) - mrst_lvds_init(dev, &dev_priv->mode_dev); - else - dev_err(dev->dev, "DSI is not supported\n"); - if (dev_priv->hdmi_priv) - mrst_hdmi_init(dev, &dev_priv->mode_dev); - return 0; -} - -/* - * Provide the low level interfaces for the Moorestown backlight - */ - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - -#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF -#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ -#define BLC_PWM_FREQ_CALC_CONSTANT 32 -#define MHz 1000000 -#define BLC_ADJUSTMENT_MAX 100 - -static struct backlight_device *mrst_backlight_device; -static int mrst_brightness; - -static int mrst_set_brightness(struct backlight_device *bd) -{ - struct drm_device *dev = bl_get_data(mrst_backlight_device); - struct drm_psb_private *dev_priv = dev->dev_private; - int level = bd->props.brightness; - u32 blc_pwm_ctl; - u32 max_pwm_blc; - - /* Percentage 1-100% being valid */ - if (level < 1) - level = 1; - - if (gma_power_begin(dev, 0)) { - /* Calculate and set the brightness value */ - max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16; - blc_pwm_ctl = level * max_pwm_blc / 100; - - /* Adjust the backlight level with the percent in - * dev_priv->blc_adj1; - */ - blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1; - blc_pwm_ctl = blc_pwm_ctl / 100; - - /* Adjust the backlight level with the percent in - * dev_priv->blc_adj2; - */ - blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2; - blc_pwm_ctl = blc_pwm_ctl / 100; - - /* force PWM bit on */ - REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); - REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl); - gma_power_end(dev); - } - mrst_brightness = level; - return 0; -} - -static int mrst_get_brightness(struct backlight_device *bd) -{ - /* return locally cached var instead of HW read (due to DPST etc.) */ - /* FIXME: ideally return actual value in case firmware fiddled with - it */ - return mrst_brightness; -} - -static int device_backlight_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long core_clock; - u16 bl_max_freq; - uint32_t value; - uint32_t blc_pwm_precision_factor; - - dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; - dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; - bl_max_freq = 256; - /* this needs to be set elsewhere */ - blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR; - - core_clock = dev_priv->core_freq; - - value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; - value *= blc_pwm_precision_factor; - value /= bl_max_freq; - value /= blc_pwm_precision_factor; - - if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ) - return -ERANGE; - - if (gma_power_begin(dev, false)) { - REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); - REG_WRITE(BLC_PWM_CTL, value | (value << 16)); - gma_power_end(dev); - } - return 0; -} - -static const struct backlight_ops mrst_ops = { - .get_brightness = mrst_get_brightness, - .update_status = mrst_set_brightness, -}; - -int mrst_backlight_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - int ret; - struct backlight_properties props; - - memset(&props, 0, sizeof(struct backlight_properties)); - props.max_brightness = 100; - props.type = BACKLIGHT_PLATFORM; - - mrst_backlight_device = backlight_device_register("mrst-bl", - NULL, (void *)dev, &mrst_ops, &props); - - if (IS_ERR(mrst_backlight_device)) - return PTR_ERR(mrst_backlight_device); - - ret = device_backlight_init(dev); - if (ret < 0) { - backlight_device_unregister(mrst_backlight_device); - return ret; - } - mrst_backlight_device->props.brightness = 100; - mrst_backlight_device->props.max_brightness = 100; - backlight_update_status(mrst_backlight_device); - dev_priv->backlight_device = mrst_backlight_device; - return 0; -} - -#endif - -/* - * Provide the Moorestown specific chip logic and low level methods - * for power management - */ - -static void mrst_init_pm(struct drm_device *dev) -{ -} - -/** - * mrst_save_display_registers - save registers lost on suspend - * @dev: our DRM device - * - * Save the state we need in order to be able to restore the interface - * upon resume from suspend - */ -static int mrst_save_display_registers(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - int i; - u32 pp_stat; - - /* Display arbitration control + watermarks */ - dev_priv->saveDSPARB = PSB_RVDC32(DSPARB); - dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1); - dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2); - dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3); - dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4); - dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5); - dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6); - dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT); - - /* Pipe & plane A info */ - dev_priv->savePIPEACONF = PSB_RVDC32(PIPEACONF); - dev_priv->savePIPEASRC = PSB_RVDC32(PIPEASRC); - dev_priv->saveFPA0 = PSB_RVDC32(MRST_FPA0); - dev_priv->saveFPA1 = PSB_RVDC32(MRST_FPA1); - dev_priv->saveDPLL_A = PSB_RVDC32(MRST_DPLL_A); - dev_priv->saveHTOTAL_A = PSB_RVDC32(HTOTAL_A); - dev_priv->saveHBLANK_A = PSB_RVDC32(HBLANK_A); - dev_priv->saveHSYNC_A = PSB_RVDC32(HSYNC_A); - dev_priv->saveVTOTAL_A = PSB_RVDC32(VTOTAL_A); - dev_priv->saveVBLANK_A = PSB_RVDC32(VBLANK_A); - dev_priv->saveVSYNC_A = PSB_RVDC32(VSYNC_A); - dev_priv->saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A); - dev_priv->saveDSPACNTR = PSB_RVDC32(DSPACNTR); - dev_priv->saveDSPASTRIDE = PSB_RVDC32(DSPASTRIDE); - dev_priv->saveDSPAADDR = PSB_RVDC32(DSPABASE); - dev_priv->saveDSPASURF = PSB_RVDC32(DSPASURF); - dev_priv->saveDSPALINOFF = PSB_RVDC32(DSPALINOFF); - dev_priv->saveDSPATILEOFF = PSB_RVDC32(DSPATILEOFF); - - /* Save cursor regs */ - dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR); - dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE); - dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS); - - /* Save palette (gamma) */ - for (i = 0; i < 256; i++) - dev_priv->save_palette_a[i] = PSB_RVDC32(PALETTE_A + (i << 2)); - - if (dev_priv->hdmi_priv) - mrst_hdmi_save(dev); - - /* Save performance state */ - dev_priv->savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE); - - /* LVDS state */ - dev_priv->savePP_CONTROL = PSB_RVDC32(PP_CONTROL); - dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); - dev_priv->savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS); - dev_priv->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL); - dev_priv->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2); - dev_priv->saveLVDS = PSB_RVDC32(LVDS); - dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); - dev_priv->savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON); - dev_priv->savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF); - dev_priv->savePP_DIVISOR = PSB_RVDC32(PP_CYCLE); - - /* HW overlay */ - dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD); - dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0); - dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1); - dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2); - dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3); - dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4); - dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5); - - /* DPST registers */ - dev_priv->saveHISTOGRAM_INT_CONTROL_REG = - PSB_RVDC32(HISTOGRAM_INT_CONTROL); - dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG = - PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL); - dev_priv->savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC); - - if (dev_priv->iLVDS_enable) { - /* Shut down the panel */ - PSB_WVDC32(0, PP_CONTROL); - - do { - pp_stat = PSB_RVDC32(PP_STATUS); - } while (pp_stat & 0x80000000); - - /* Turn off the plane */ - PSB_WVDC32(0x58000000, DSPACNTR); - /* Trigger the plane disable */ - PSB_WVDC32(0, DSPASURF); - - /* Wait ~4 ticks */ - msleep(4); - - /* Turn off pipe */ - PSB_WVDC32(0x0, PIPEACONF); - /* Wait ~8 ticks */ - msleep(8); - - /* Turn off PLLs */ - PSB_WVDC32(0, MRST_DPLL_A); - } - return 0; -} - -/** - * mrst_restore_display_registers - restore lost register state - * @dev: our DRM device - * - * Restore register state that was lost during suspend and resume. - */ -static int mrst_restore_display_registers(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 pp_stat; - int i; - - /* Display arbitration + watermarks */ - PSB_WVDC32(dev_priv->saveDSPARB, DSPARB); - PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1); - PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2); - PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3); - PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4); - PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5); - PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6); - PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT); - - /* Make sure VGA plane is off. it initializes to on after reset!*/ - PSB_WVDC32(0x80000000, VGACNTRL); - - /* set the plls */ - PSB_WVDC32(dev_priv->saveFPA0, MRST_FPA0); - PSB_WVDC32(dev_priv->saveFPA1, MRST_FPA1); - - /* Actually enable it */ - PSB_WVDC32(dev_priv->saveDPLL_A, MRST_DPLL_A); - DRM_UDELAY(150); - - /* Restore mode */ - PSB_WVDC32(dev_priv->saveHTOTAL_A, HTOTAL_A); - PSB_WVDC32(dev_priv->saveHBLANK_A, HBLANK_A); - PSB_WVDC32(dev_priv->saveHSYNC_A, HSYNC_A); - PSB_WVDC32(dev_priv->saveVTOTAL_A, VTOTAL_A); - PSB_WVDC32(dev_priv->saveVBLANK_A, VBLANK_A); - PSB_WVDC32(dev_priv->saveVSYNC_A, VSYNC_A); - PSB_WVDC32(dev_priv->savePIPEASRC, PIPEASRC); - PSB_WVDC32(dev_priv->saveBCLRPAT_A, BCLRPAT_A); - - /* Restore performance mode*/ - PSB_WVDC32(dev_priv->savePERF_MODE, MRST_PERF_MODE); - - /* Enable the pipe*/ - if (dev_priv->iLVDS_enable) - PSB_WVDC32(dev_priv->savePIPEACONF, PIPEACONF); - - /* Set up the plane*/ - PSB_WVDC32(dev_priv->saveDSPALINOFF, DSPALINOFF); - PSB_WVDC32(dev_priv->saveDSPASTRIDE, DSPASTRIDE); - PSB_WVDC32(dev_priv->saveDSPATILEOFF, DSPATILEOFF); - - /* Enable the plane */ - PSB_WVDC32(dev_priv->saveDSPACNTR, DSPACNTR); - PSB_WVDC32(dev_priv->saveDSPASURF, DSPASURF); - - /* Enable Cursor A */ - PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR); - PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS); - PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE); - - /* Restore palette (gamma) */ - for (i = 0; i < 256; i++) - PSB_WVDC32(dev_priv->save_palette_a[i], PALETTE_A + (i << 2)); - - if (dev_priv->hdmi_priv) - mrst_hdmi_restore(dev); - - if (dev_priv->iLVDS_enable) { - PSB_WVDC32(dev_priv->saveBLC_PWM_CTL2, BLC_PWM_CTL2); - PSB_WVDC32(dev_priv->saveLVDS, LVDS); /*port 61180h*/ - PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL); - PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); - PSB_WVDC32(dev_priv->savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS); - PSB_WVDC32(dev_priv->saveBLC_PWM_CTL, BLC_PWM_CTL); - PSB_WVDC32(dev_priv->savePP_ON_DELAYS, LVDSPP_ON); - PSB_WVDC32(dev_priv->savePP_OFF_DELAYS, LVDSPP_OFF); - PSB_WVDC32(dev_priv->savePP_DIVISOR, PP_CYCLE); - PSB_WVDC32(dev_priv->savePP_CONTROL, PP_CONTROL); - } - - /* Wait for cycle delay */ - do { - pp_stat = PSB_RVDC32(PP_STATUS); - } while (pp_stat & 0x08000000); - - /* Wait for panel power up */ - do { - pp_stat = PSB_RVDC32(PP_STATUS); - } while (pp_stat & 0x10000000); - - /* Restore HW overlay */ - PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD); - PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0); - PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1); - PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2); - PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3); - PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4); - PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5); - - /* DPST registers */ - PSB_WVDC32(dev_priv->saveHISTOGRAM_INT_CONTROL_REG, - HISTOGRAM_INT_CONTROL); - PSB_WVDC32(dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG, - HISTOGRAM_LOGIC_CONTROL); - PSB_WVDC32(dev_priv->savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC); - - return 0; -} - -/** - * mrst_power_down - power down the display island - * @dev: our DRM device - * - * Power down the display interface of our device - */ -static int mrst_power_down(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 pwr_mask ; - u32 pwr_sts; - - pwr_mask = PSB_PWRGT_DISPLAY_MASK; - outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC); - - while (true) { - pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); - if ((pwr_sts & pwr_mask) == pwr_mask) - break; - else - udelay(10); - } - return 0; -} - -/* - * mrst_power_up - * - * Restore power to the specified island(s) (powergating) - */ -static int mrst_power_up(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK; - u32 pwr_sts, pwr_cnt; - - pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC); - pwr_cnt &= ~pwr_mask; - outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC)); - - while (true) { - pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); - if ((pwr_sts & pwr_mask) == 0) - break; - else - udelay(10); - } - return 0; -} - -#if defined(CONFIG_X86_MRST) -static void mrst_lvds_cache_bl(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - intel_scu_ipc_ioread8(0x28, &(dev_priv->saveBKLTCNT)); - intel_scu_ipc_ioread8(0x29, &(dev_priv->saveBKLTREQ)); - intel_scu_ipc_ioread8(0x2A, &(dev_priv->saveBKLTBRTL)); -} - -static void mrst_mm_bl_power(struct drm_device *dev, bool on) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - if (on) { - intel_scu_ipc_iowrite8(0x2A, dev_priv->saveBKLTBRTL); - intel_scu_ipc_iowrite8(0x28, dev_priv->saveBKLTCNT); - intel_scu_ipc_iowrite8(0x29, dev_priv->saveBKLTREQ); - } else { - intel_scu_ipc_iowrite8(0x2A, 0); - intel_scu_ipc_iowrite8(0x28, 0); - intel_scu_ipc_iowrite8(0x29, 0); - } -} - -static const struct psb_ops mrst_mm_chip_ops = { - .name = "Moorestown MM ", - .accel_2d = 1, - .pipes = 1, - .crtcs = 1, - .sgx_offset = MRST_SGX_OFFSET, - - .crtc_helper = &mrst_helper_funcs, - .crtc_funcs = &psb_intel_crtc_funcs, - - .output_init = mrst_output_init, - - .lvds_bl_power = mrst_mm_bl_power, -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - .backlight_init = mrst_backlight_init, -#endif - - .init_pm = mrst_init_pm, - .save_regs = mrst_save_display_registers, - .restore_regs = mrst_restore_display_registers, - .power_down = mrst_power_down, - .power_up = mrst_power_up, - - .i2c_bus = 0, -}; - -#endif - -static void oaktrail_teardown(struct drm_device *dev) -{ - mrst_hdmi_teardown(dev); -} - -static const struct psb_ops oaktrail_chip_ops = { - .name = "Oaktrail", - .accel_2d = 1, - .pipes = 2, - .crtcs = 2, - .sgx_offset = MRST_SGX_OFFSET, - - .chip_setup = mid_chip_setup, - .chip_teardown = oaktrail_teardown, - .crtc_helper = &mrst_helper_funcs, - .crtc_funcs = &psb_intel_crtc_funcs, - - .output_init = mrst_output_init, - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - .backlight_init = mrst_backlight_init, -#endif - - .init_pm = mrst_init_pm, - .save_regs = mrst_save_display_registers, - .restore_regs = mrst_restore_display_registers, - .power_down = mrst_power_down, - .power_up = mrst_power_up, - - .i2c_bus = 1, -}; - -/** - * mrst_chip_setup - perform the initial chip init - * @dev: Our drm_device - * - * Figure out which incarnation we are and then scan the firmware for - * tables and information. - */ -static int mrst_chip_setup(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - switch (mrst_device_ident(dev)) { - case DEVICE_OAKTRAIL: - /* Dual CRTC, PC compatible, HDMI, I2C #2 */ - dev_priv->ops = &oaktrail_chip_ops; - mrst_hdmi_setup(dev); - return mid_chip_setup(dev); -#if defined(CONFIG_X86_MRST) - case DEVICE_MOORESTOWN_MM: - /* Single CRTC, No HDMI, I2C #0, BL control */ - mrst_lvds_cache_bl(dev); - dev_priv->ops = &mrst_mm_chip_ops; - return mid_chip_setup(dev); - case DEVICE_MOORESTOWN: - /* Dual CRTC, No HDMI(?), I2C #1 */ - return mid_chip_setup(dev); -#endif - default: - dev_err(dev->dev, "unsupported device type.\n"); - return -ENODEV; - } -} - -const struct psb_ops mrst_chip_ops = { - .name = "Moorestown", - .accel_2d = 1, - .pipes = 2, - .crtcs = 2, - .sgx_offset = MRST_SGX_OFFSET, - - .chip_setup = mrst_chip_setup, - .crtc_helper = &mrst_helper_funcs, - .crtc_funcs = &psb_intel_crtc_funcs, - - .output_init = mrst_output_init, - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - .backlight_init = mrst_backlight_init, -#endif - - .init_pm = mrst_init_pm, - .save_regs = mrst_save_display_registers, - .restore_regs = mrst_restore_display_registers, - .power_down = mrst_power_down, - .power_up = mrst_power_up, - - .i2c_bus = 2, -}; - diff --git a/drivers/staging/gma500/mrst_hdmi.c b/drivers/staging/gma500/mrst_hdmi.c deleted file mode 100644 index e66607eb3d3e..000000000000 --- a/drivers/staging/gma500/mrst_hdmi.c +++ /dev/null @@ -1,852 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Li Peng - */ - -#include -#include -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "psb_drv.h" - -#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg)) -#define HDMI_WRITE(reg, val) writel(val, hdmi_dev->regs + (reg)) - -#define HDMI_HCR 0x1000 -#define HCR_ENABLE_HDCP (1 << 5) -#define HCR_ENABLE_AUDIO (1 << 2) -#define HCR_ENABLE_PIXEL (1 << 1) -#define HCR_ENABLE_TMDS (1 << 0) - -#define HDMI_HICR 0x1004 -#define HDMI_HSR 0x1008 -#define HDMI_HISR 0x100C -#define HDMI_DETECT_HDP (1 << 0) - -#define HDMI_VIDEO_REG 0x3000 -#define HDMI_UNIT_EN (1 << 7) -#define HDMI_MODE_OUTPUT (1 << 0) -#define HDMI_HBLANK_A 0x3100 - -#define HDMI_AUDIO_CTRL 0x4000 -#define HDMI_ENABLE_AUDIO (1 << 0) - -#define PCH_HTOTAL_B 0x3100 -#define PCH_HBLANK_B 0x3104 -#define PCH_HSYNC_B 0x3108 -#define PCH_VTOTAL_B 0x310C -#define PCH_VBLANK_B 0x3110 -#define PCH_VSYNC_B 0x3114 -#define PCH_PIPEBSRC 0x311C - -#define PCH_PIPEB_DSL 0x3800 -#define PCH_PIPEB_SLC 0x3804 -#define PCH_PIPEBCONF 0x3808 -#define PCH_PIPEBSTAT 0x3824 - -#define CDVO_DFT 0x5000 -#define CDVO_SLEWRATE 0x5004 -#define CDVO_STRENGTH 0x5008 -#define CDVO_RCOMP 0x500C - -#define DPLL_CTRL 0x6000 -#define DPLL_PDIV_SHIFT 16 -#define DPLL_PDIV_MASK (0xf << 16) -#define DPLL_PWRDN (1 << 4) -#define DPLL_RESET (1 << 3) -#define DPLL_FASTEN (1 << 2) -#define DPLL_ENSTAT (1 << 1) -#define DPLL_DITHEN (1 << 0) - -#define DPLL_DIV_CTRL 0x6004 -#define DPLL_CLKF_MASK 0xffffffc0 -#define DPLL_CLKR_MASK (0x3f) - -#define DPLL_CLK_ENABLE 0x6008 -#define DPLL_EN_DISP (1 << 31) -#define DPLL_SEL_HDMI (1 << 8) -#define DPLL_EN_HDMI (1 << 1) -#define DPLL_EN_VGA (1 << 0) - -#define DPLL_ADJUST 0x600C -#define DPLL_STATUS 0x6010 -#define DPLL_UPDATE 0x6014 -#define DPLL_DFT 0x6020 - -struct intel_range { - int min, max; -}; - -struct mrst_hdmi_limit { - struct intel_range vco, np, nr, nf; -}; - -struct mrst_hdmi_clock { - int np; - int nr; - int nf; - int dot; -}; - -#define VCO_MIN 320000 -#define VCO_MAX 1650000 -#define NP_MIN 1 -#define NP_MAX 15 -#define NR_MIN 1 -#define NR_MAX 64 -#define NF_MIN 2 -#define NF_MAX 4095 - -static const struct mrst_hdmi_limit mrst_hdmi_limit = { - .vco = { .min = VCO_MIN, .max = VCO_MAX }, - .np = { .min = NP_MIN, .max = NP_MAX }, - .nr = { .min = NR_MIN, .max = NR_MAX }, - .nf = { .min = NF_MIN, .max = NF_MAX }, -}; - -static void wait_for_vblank(struct drm_device *dev) -{ - /* FIXME: Can we do this as a sleep ? */ - /* Wait for 20ms, i.e. one cycle at 50hz. */ - mdelay(20); -} - -static void scu_busy_loop(void *scu_base) -{ - u32 status = 0; - u32 loop_count = 0; - - status = readl(scu_base + 0x04); - while (status & 1) { - udelay(1); /* scu processing time is in few u secods */ - status = readl(scu_base + 0x04); - loop_count++; - /* break if scu doesn't reset busy bit after huge retry */ - if (loop_count > 1000) { - DRM_DEBUG_KMS("SCU IPC timed out"); - return; - } - } -} - -static void mrst_hdmi_reset(struct drm_device *dev) -{ - void *base; - /* FIXME: at least make these defines */ - unsigned int scu_ipc_mmio = 0xff11c000; - int scu_len = 1024; - - base = ioremap((resource_size_t)scu_ipc_mmio, scu_len); - if (base == NULL) { - DRM_ERROR("failed to map SCU mmio\n"); - return; - } - - /* scu ipc: assert hdmi controller reset */ - writel(0xff11d118, base + 0x0c); - writel(0x7fffffdf, base + 0x80); - writel(0x42005, base + 0x0); - scu_busy_loop(base); - - /* scu ipc: de-assert hdmi controller reset */ - writel(0xff11d118, base + 0x0c); - writel(0x7fffffff, base + 0x80); - writel(0x42005, base + 0x0); - scu_busy_loop(base); - - iounmap(base); -} - -static void mrst_hdmi_audio_enable(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - - HDMI_WRITE(HDMI_HCR, 0x67); - HDMI_READ(HDMI_HCR); - - HDMI_WRITE(0x51a8, 0x10); - HDMI_READ(0x51a8); - - HDMI_WRITE(HDMI_AUDIO_CTRL, 0x1); - HDMI_READ(HDMI_AUDIO_CTRL); -} - -static void mrst_hdmi_audio_disable(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - - HDMI_WRITE(0x51a8, 0x0); - HDMI_READ(0x51a8); - - HDMI_WRITE(HDMI_AUDIO_CTRL, 0x0); - HDMI_READ(HDMI_AUDIO_CTRL); - - HDMI_WRITE(HDMI_HCR, 0x47); - HDMI_READ(HDMI_HCR); -} - -void mrst_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode) -{ - struct drm_device *dev = crtc->dev; - u32 temp; - - switch (mode) { - case DRM_MODE_DPMS_OFF: - /* Disable VGACNTRL */ - REG_WRITE(VGACNTRL, 0x80000000); - - /* Disable plane */ - temp = REG_READ(DSPBCNTR); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE); - REG_READ(DSPBCNTR); - /* Flush the plane changes */ - REG_WRITE(DSPBSURF, REG_READ(DSPBSURF)); - REG_READ(DSPBSURF); - } - - /* Disable pipe B */ - temp = REG_READ(PIPEBCONF); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE); - REG_READ(PIPEBCONF); - } - - /* Disable LNW Pipes, etc */ - temp = REG_READ(PCH_PIPEBCONF); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE); - REG_READ(PCH_PIPEBCONF); - } - /* wait for pipe off */ - udelay(150); - /* Disable dpll */ - temp = REG_READ(DPLL_CTRL); - if ((temp & DPLL_PWRDN) == 0) { - REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET)); - REG_WRITE(DPLL_STATUS, 0x1); - } - /* wait for dpll off */ - udelay(150); - break; - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - /* Enable dpll */ - temp = REG_READ(DPLL_CTRL); - if ((temp & DPLL_PWRDN) != 0) { - REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET)); - temp = REG_READ(DPLL_CLK_ENABLE); - REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI); - REG_READ(DPLL_CLK_ENABLE); - } - /* wait for dpll warm up */ - udelay(150); - - /* Enable pipe B */ - temp = REG_READ(PIPEBCONF); - if ((temp & PIPEACONF_ENABLE) == 0) { - REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE); - REG_READ(PIPEBCONF); - } - - /* Enable LNW Pipe B */ - temp = REG_READ(PCH_PIPEBCONF); - if ((temp & PIPEACONF_ENABLE) == 0) { - REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE); - REG_READ(PCH_PIPEBCONF); - } - wait_for_vblank(dev); - - /* Enable plane */ - temp = REG_READ(DSPBCNTR); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(DSPBSURF, REG_READ(DSPBSURF)); - REG_READ(DSPBSURF); - } - psb_intel_crtc_load_lut(crtc); - } - /* DSPARB */ - REG_WRITE(DSPARB, 0x00003fbf); - /* FW1 */ - REG_WRITE(0x70034, 0x3f880a0a); - /* FW2 */ - REG_WRITE(0x70038, 0x0b060808); - /* FW4 */ - REG_WRITE(0x70050, 0x08030404); - /* FW5 */ - REG_WRITE(0x70054, 0x04040404); - /* LNC Chicken Bits */ - REG_WRITE(0x70400, 0x4000); -} - - -static void mrst_hdmi_dpms(struct drm_encoder *encoder, int mode) -{ - static int dpms_mode = -1; - - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - u32 temp; - - if (dpms_mode == mode) - return; - - if (mode != DRM_MODE_DPMS_ON) - temp = 0x0; - else - temp = 0x99; - - dpms_mode = mode; - HDMI_WRITE(HDMI_VIDEO_REG, temp); -} - -static unsigned int htotal_calculate(struct drm_display_mode *mode) -{ - u32 htotal, new_crtc_htotal; - - htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16); - - /* - * 1024 x 768 new_crtc_htotal = 0x1024; - * 1280 x 1024 new_crtc_htotal = 0x0c34; - */ - new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock; - - return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16); -} - -static void mrst_hdmi_find_dpll(struct drm_crtc *crtc, int target, - int refclk, struct mrst_hdmi_clock *best_clock) -{ - int np_min, np_max, nr_min, nr_max; - int np, nr, nf; - - np_min = DIV_ROUND_UP(mrst_hdmi_limit.vco.min, target * 10); - np_max = mrst_hdmi_limit.vco.max / (target * 10); - if (np_min < mrst_hdmi_limit.np.min) - np_min = mrst_hdmi_limit.np.min; - if (np_max > mrst_hdmi_limit.np.max) - np_max = mrst_hdmi_limit.np.max; - - nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max)); - nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min)); - if (nr_min < mrst_hdmi_limit.nr.min) - nr_min = mrst_hdmi_limit.nr.min; - if (nr_max > mrst_hdmi_limit.nr.max) - nr_max = mrst_hdmi_limit.nr.max; - - np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max)); - nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np)); - nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk); - DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf); - - /* - * 1024 x 768 np = 1; nr = 0x26; nf = 0x0fd8000; - * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000; - */ - best_clock->np = np; - best_clock->nr = nr - 1; - best_clock->nf = (nf << 14); -} - -int mrst_crtc_hdmi_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - int pipe = 1; - int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; - int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; - int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int refclk; - struct mrst_hdmi_clock clock; - u32 dspcntr, pipeconf, dpll, temp; - int dspcntr_reg = DSPBCNTR; - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - - /* XXX: Disable the panel fitter if it was on our pipe */ - - /* Disable dpll if necessary */ - dpll = REG_READ(DPLL_CTRL); - if ((dpll & DPLL_PWRDN) == 0) { - REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET)); - REG_WRITE(DPLL_DIV_CTRL, 0x00000000); - REG_WRITE(DPLL_STATUS, 0x1); - } - udelay(150); - - /* reset controller: FIXME - can we sort out the ioremap mess ? */ - iounmap(hdmi_dev->regs); - mrst_hdmi_reset(dev); - - /* program and enable dpll */ - refclk = 25000; - mrst_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock); - - /* Setting DPLL */ - dpll = REG_READ(DPLL_CTRL); - dpll &= ~DPLL_PDIV_MASK; - dpll &= ~(DPLL_PWRDN | DPLL_RESET); - REG_WRITE(DPLL_CTRL, 0x00000008); - REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr)); - REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1)); - REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN)); - REG_WRITE(DPLL_UPDATE, 0x80000000); - REG_WRITE(DPLL_CLK_ENABLE, 0x80050102); - udelay(150); - - hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len); - if (hdmi_dev->regs == NULL) { - DRM_ERROR("failed to do hdmi mmio mapping\n"); - return -ENOMEM; - } - - /* configure HDMI */ - HDMI_WRITE(0x1004, 0x1fd); - HDMI_WRITE(0x2000, 0x1); - HDMI_WRITE(0x2008, 0x0); - HDMI_WRITE(0x3130, 0x8); - HDMI_WRITE(0x101c, 0x1800810); - - temp = htotal_calculate(adjusted_mode); - REG_WRITE(htot_reg, temp); - REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); - REG_WRITE(pipesrc_reg, - ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); - - REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); - REG_WRITE(PCH_PIPEBSRC, - ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); - - temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start; - HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) | temp); - - REG_WRITE(dspsize_reg, - ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); - REG_WRITE(dsppos_reg, 0); - - /* Flush the plane changes */ - { - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->mode_set_base(crtc, x, y, old_fb); - } - - /* Set up the display plane register */ - dspcntr = REG_READ(dspcntr_reg); - dspcntr |= DISPPLANE_GAMMA_ENABLE; - dspcntr |= DISPPLANE_SEL_PIPE_B; - dspcntr |= DISPLAY_PLANE_ENABLE; - - /* setup pipeconf */ - pipeconf = REG_READ(pipeconf_reg); - pipeconf |= PIPEACONF_ENABLE; - - REG_WRITE(pipeconf_reg, pipeconf); - REG_READ(pipeconf_reg); - - REG_WRITE(PCH_PIPEBCONF, pipeconf); - REG_READ(PCH_PIPEBCONF); - wait_for_vblank(dev); - - REG_WRITE(dspcntr_reg, dspcntr); - wait_for_vblank(dev); - - return 0; -} - -static int mrst_hdmi_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - if (mode->clock > 165000) - return MODE_CLOCK_HIGH; - if (mode->clock < 20000) - return MODE_CLOCK_LOW; - - if (mode->flags & DRM_MODE_FLAG_DBLSCAN) - return MODE_NO_DBLESCAN; - - return MODE_OK; -} - -static bool mrst_hdmi_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - return true; -} - -static enum drm_connector_status -mrst_hdmi_detect(struct drm_connector *connector, bool force) -{ - enum drm_connector_status status; - struct drm_device *dev = connector->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - u32 temp; - - temp = HDMI_READ(HDMI_HSR); - DRM_DEBUG_KMS("HDMI_HSR %x\n", temp); - - if ((temp & HDMI_DETECT_HDP) != 0) - status = connector_status_connected; - else - status = connector_status_disconnected; - - return status; -} - -static const unsigned char raw_edid[] = { - 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x10, 0xac, 0x2f, 0xa0, - 0x53, 0x55, 0x33, 0x30, 0x16, 0x13, 0x01, 0x03, 0x0e, 0x3a, 0x24, 0x78, - 0xea, 0xe9, 0xf5, 0xac, 0x51, 0x30, 0xb4, 0x25, 0x11, 0x50, 0x54, 0xa5, - 0x4b, 0x00, 0x81, 0x80, 0xa9, 0x40, 0x71, 0x4f, 0xb3, 0x00, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x28, 0x3c, 0x80, 0xa0, 0x70, 0xb0, - 0x23, 0x40, 0x30, 0x20, 0x36, 0x00, 0x46, 0x6c, 0x21, 0x00, 0x00, 0x1a, - 0x00, 0x00, 0x00, 0xff, 0x00, 0x47, 0x4e, 0x37, 0x32, 0x31, 0x39, 0x35, - 0x52, 0x30, 0x33, 0x55, 0x53, 0x0a, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x44, - 0x45, 0x4c, 0x4c, 0x20, 0x32, 0x37, 0x30, 0x39, 0x57, 0x0a, 0x20, 0x20, - 0x00, 0x00, 0x00, 0xfd, 0x00, 0x38, 0x4c, 0x1e, 0x53, 0x11, 0x00, 0x0a, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x8d -}; - -static int mrst_hdmi_get_modes(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct i2c_adapter *i2c_adap; - struct edid *edid; - struct drm_display_mode *mode, *t; - int i = 0, ret = 0; - - i2c_adap = i2c_get_adapter(3); - if (i2c_adap == NULL) { - DRM_ERROR("No ddc adapter available!\n"); - edid = (struct edid *)raw_edid; - } else { - edid = (struct edid *)raw_edid; - /* FIXME ? edid = drm_get_edid(connector, i2c_adap); */ - } - - if (edid) { - drm_mode_connector_update_edid_property(connector, edid); - ret = drm_add_edid_modes(connector, edid); - connector->display_info.raw_edid = NULL; - } - - /* - * prune modes that require frame buffer bigger than stolen mem - */ - list_for_each_entry_safe(mode, t, &connector->probed_modes, head) { - if ((mode->hdisplay * mode->vdisplay * 4) >= dev_priv->vram_stolen_size) { - i++; - drm_mode_remove(connector, mode); - } - } - return ret - i; -} - -static void mrst_hdmi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - - mrst_hdmi_audio_enable(dev); - return; -} - -static void mrst_hdmi_destroy(struct drm_connector *connector) -{ - return; -} - -static const struct drm_encoder_helper_funcs mrst_hdmi_helper_funcs = { - .dpms = mrst_hdmi_dpms, - .mode_fixup = mrst_hdmi_mode_fixup, - .prepare = psb_intel_encoder_prepare, - .mode_set = mrst_hdmi_mode_set, - .commit = psb_intel_encoder_commit, -}; - -static const struct drm_connector_helper_funcs - mrst_hdmi_connector_helper_funcs = { - .get_modes = mrst_hdmi_get_modes, - .mode_valid = mrst_hdmi_mode_valid, - .best_encoder = psb_intel_best_encoder, -}; - -static const struct drm_connector_funcs mrst_hdmi_connector_funcs = { - .dpms = drm_helper_connector_dpms, - .detect = mrst_hdmi_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = mrst_hdmi_destroy, -}; - -static void mrst_hdmi_enc_destroy(struct drm_encoder *encoder) -{ - drm_encoder_cleanup(encoder); -} - -static const struct drm_encoder_funcs mrst_hdmi_enc_funcs = { - .destroy = mrst_hdmi_enc_destroy, -}; - -void mrst_hdmi_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev) -{ - struct psb_intel_output *psb_intel_output; - struct drm_connector *connector; - struct drm_encoder *encoder; - - psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL); - if (!psb_intel_output) - return; - - psb_intel_output->mode_dev = mode_dev; - connector = &psb_intel_output->base; - encoder = &psb_intel_output->enc; - drm_connector_init(dev, &psb_intel_output->base, - &mrst_hdmi_connector_funcs, - DRM_MODE_CONNECTOR_DVID); - - drm_encoder_init(dev, &psb_intel_output->enc, - &mrst_hdmi_enc_funcs, - DRM_MODE_ENCODER_TMDS); - - drm_mode_connector_attach_encoder(&psb_intel_output->base, - &psb_intel_output->enc); - - psb_intel_output->type = INTEL_OUTPUT_HDMI; - drm_encoder_helper_add(encoder, &mrst_hdmi_helper_funcs); - drm_connector_helper_add(connector, &mrst_hdmi_connector_helper_funcs); - - connector->display_info.subpixel_order = SubPixelHorizontalRGB; - connector->interlace_allowed = false; - connector->doublescan_allowed = false; - drm_sysfs_connector_add(connector); - - return; -} - -static DEFINE_PCI_DEVICE_TABLE(hdmi_ids) = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080d) }, - {} -}; - -void mrst_hdmi_setup(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct pci_dev *pdev; - struct mrst_hdmi_dev *hdmi_dev; - int ret; - - pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x080d, NULL); - if (!pdev) - return; - - hdmi_dev = kzalloc(sizeof(struct mrst_hdmi_dev), GFP_KERNEL); - if (!hdmi_dev) { - dev_err(dev->dev, "failed to allocate memory\n"); - goto out; - } - - - ret = pci_enable_device(pdev); - if (ret) { - dev_err(dev->dev, "failed to enable hdmi controller\n"); - goto free; - } - - hdmi_dev->mmio = pci_resource_start(pdev, 0); - hdmi_dev->mmio_len = pci_resource_len(pdev, 0); - hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len); - if (!hdmi_dev->regs) { - dev_err(dev->dev, "failed to map hdmi mmio\n"); - goto free; - } - - hdmi_dev->dev = pdev; - pci_set_drvdata(pdev, hdmi_dev); - - /* Initialize i2c controller */ - ret = mrst_hdmi_i2c_init(hdmi_dev->dev); - if (ret) - dev_err(dev->dev, "HDMI I2C initialization failed\n"); - - dev_priv->hdmi_priv = hdmi_dev; - mrst_hdmi_audio_disable(dev); - return; - -free: - kfree(hdmi_dev); -out: - return; -} - -void mrst_hdmi_teardown(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - struct pci_dev *pdev; - - if (hdmi_dev) { - pdev = hdmi_dev->dev; - pci_set_drvdata(pdev, NULL); - mrst_hdmi_i2c_exit(pdev); - iounmap(hdmi_dev->regs); - kfree(hdmi_dev); - pci_dev_put(pdev); - } -} - -/* save HDMI register state */ -void mrst_hdmi_save(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - int i; - - /* dpll */ - hdmi_dev->saveDPLL_CTRL = PSB_RVDC32(DPLL_CTRL); - hdmi_dev->saveDPLL_DIV_CTRL = PSB_RVDC32(DPLL_DIV_CTRL); - hdmi_dev->saveDPLL_ADJUST = PSB_RVDC32(DPLL_ADJUST); - hdmi_dev->saveDPLL_UPDATE = PSB_RVDC32(DPLL_UPDATE); - hdmi_dev->saveDPLL_CLK_ENABLE = PSB_RVDC32(DPLL_CLK_ENABLE); - - /* pipe B */ - dev_priv->savePIPEBCONF = PSB_RVDC32(PIPEBCONF); - dev_priv->savePIPEBSRC = PSB_RVDC32(PIPEBSRC); - dev_priv->saveHTOTAL_B = PSB_RVDC32(HTOTAL_B); - dev_priv->saveHBLANK_B = PSB_RVDC32(HBLANK_B); - dev_priv->saveHSYNC_B = PSB_RVDC32(HSYNC_B); - dev_priv->saveVTOTAL_B = PSB_RVDC32(VTOTAL_B); - dev_priv->saveVBLANK_B = PSB_RVDC32(VBLANK_B); - dev_priv->saveVSYNC_B = PSB_RVDC32(VSYNC_B); - - hdmi_dev->savePCH_PIPEBCONF = PSB_RVDC32(PCH_PIPEBCONF); - hdmi_dev->savePCH_PIPEBSRC = PSB_RVDC32(PCH_PIPEBSRC); - hdmi_dev->savePCH_HTOTAL_B = PSB_RVDC32(PCH_HTOTAL_B); - hdmi_dev->savePCH_HBLANK_B = PSB_RVDC32(PCH_HBLANK_B); - hdmi_dev->savePCH_HSYNC_B = PSB_RVDC32(PCH_HSYNC_B); - hdmi_dev->savePCH_VTOTAL_B = PSB_RVDC32(PCH_VTOTAL_B); - hdmi_dev->savePCH_VBLANK_B = PSB_RVDC32(PCH_VBLANK_B); - hdmi_dev->savePCH_VSYNC_B = PSB_RVDC32(PCH_VSYNC_B); - - /* plane */ - dev_priv->saveDSPBCNTR = PSB_RVDC32(DSPBCNTR); - dev_priv->saveDSPBSTRIDE = PSB_RVDC32(DSPBSTRIDE); - dev_priv->saveDSPBADDR = PSB_RVDC32(DSPBBASE); - dev_priv->saveDSPBSURF = PSB_RVDC32(DSPBSURF); - dev_priv->saveDSPBLINOFF = PSB_RVDC32(DSPBLINOFF); - dev_priv->saveDSPBTILEOFF = PSB_RVDC32(DSPBTILEOFF); - - /* cursor B */ - dev_priv->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR); - dev_priv->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE); - dev_priv->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS); - - /* save palette */ - for (i = 0; i < 256; i++) - dev_priv->save_palette_b[i] = PSB_RVDC32(PALETTE_B + (i << 2)); -} - -/* restore HDMI register state */ -void mrst_hdmi_restore(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - int i; - - /* dpll */ - PSB_WVDC32(hdmi_dev->saveDPLL_CTRL, DPLL_CTRL); - PSB_WVDC32(hdmi_dev->saveDPLL_DIV_CTRL, DPLL_DIV_CTRL); - PSB_WVDC32(hdmi_dev->saveDPLL_ADJUST, DPLL_ADJUST); - PSB_WVDC32(hdmi_dev->saveDPLL_UPDATE, DPLL_UPDATE); - PSB_WVDC32(hdmi_dev->saveDPLL_CLK_ENABLE, DPLL_CLK_ENABLE); - DRM_UDELAY(150); - - /* pipe */ - PSB_WVDC32(dev_priv->savePIPEBSRC, PIPEBSRC); - PSB_WVDC32(dev_priv->saveHTOTAL_B, HTOTAL_B); - PSB_WVDC32(dev_priv->saveHBLANK_B, HBLANK_B); - PSB_WVDC32(dev_priv->saveHSYNC_B, HSYNC_B); - PSB_WVDC32(dev_priv->saveVTOTAL_B, VTOTAL_B); - PSB_WVDC32(dev_priv->saveVBLANK_B, VBLANK_B); - PSB_WVDC32(dev_priv->saveVSYNC_B, VSYNC_B); - - PSB_WVDC32(hdmi_dev->savePCH_PIPEBSRC, PCH_PIPEBSRC); - PSB_WVDC32(hdmi_dev->savePCH_HTOTAL_B, PCH_HTOTAL_B); - PSB_WVDC32(hdmi_dev->savePCH_HBLANK_B, PCH_HBLANK_B); - PSB_WVDC32(hdmi_dev->savePCH_HSYNC_B, PCH_HSYNC_B); - PSB_WVDC32(hdmi_dev->savePCH_VTOTAL_B, PCH_VTOTAL_B); - PSB_WVDC32(hdmi_dev->savePCH_VBLANK_B, PCH_VBLANK_B); - PSB_WVDC32(hdmi_dev->savePCH_VSYNC_B, PCH_VSYNC_B); - - PSB_WVDC32(dev_priv->savePIPEBCONF, PIPEBCONF); - PSB_WVDC32(hdmi_dev->savePCH_PIPEBCONF, PCH_PIPEBCONF); - - /* plane */ - PSB_WVDC32(dev_priv->saveDSPBLINOFF, DSPBLINOFF); - PSB_WVDC32(dev_priv->saveDSPBSTRIDE, DSPBSTRIDE); - PSB_WVDC32(dev_priv->saveDSPBTILEOFF, DSPBTILEOFF); - PSB_WVDC32(dev_priv->saveDSPBCNTR, DSPBCNTR); - PSB_WVDC32(dev_priv->saveDSPBSURF, DSPBSURF); - - /* cursor B */ - PSB_WVDC32(dev_priv->saveDSPBCURSOR_CTRL, CURBCNTR); - PSB_WVDC32(dev_priv->saveDSPBCURSOR_POS, CURBPOS); - PSB_WVDC32(dev_priv->saveDSPBCURSOR_BASE, CURBBASE); - - /* restore palette */ - for (i = 0; i < 256; i++) - PSB_WVDC32(dev_priv->save_palette_b[i], PALETTE_B + (i << 2)); -} diff --git a/drivers/staging/gma500/mrst_hdmi_i2c.c b/drivers/staging/gma500/mrst_hdmi_i2c.c deleted file mode 100644 index 36e7edc4d14c..000000000000 --- a/drivers/staging/gma500/mrst_hdmi_i2c.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Li Peng - */ - -#include -#include -#include -#include -#include -#include -#include "psb_drv.h" - -#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg)) -#define HDMI_WRITE(reg, val) writel(val, hdmi_dev->regs + (reg)) - -#define HDMI_HCR 0x1000 -#define HCR_DETECT_HDP (1 << 6) -#define HCR_ENABLE_HDCP (1 << 5) -#define HCR_ENABLE_AUDIO (1 << 2) -#define HCR_ENABLE_PIXEL (1 << 1) -#define HCR_ENABLE_TMDS (1 << 0) -#define HDMI_HICR 0x1004 -#define HDMI_INTR_I2C_ERROR (1 << 4) -#define HDMI_INTR_I2C_FULL (1 << 3) -#define HDMI_INTR_I2C_DONE (1 << 2) -#define HDMI_INTR_HPD (1 << 0) -#define HDMI_HSR 0x1008 -#define HDMI_HISR 0x100C -#define HDMI_HI2CRDB0 0x1200 -#define HDMI_HI2CHCR 0x1240 -#define HI2C_HDCP_WRITE (0 << 2) -#define HI2C_HDCP_RI_READ (1 << 2) -#define HI2C_HDCP_READ (2 << 2) -#define HI2C_EDID_READ (3 << 2) -#define HI2C_READ_CONTINUE (1 << 1) -#define HI2C_ENABLE_TRANSACTION (1 << 0) - -#define HDMI_ICRH 0x1100 -#define HDMI_HI2CTDR0 0x1244 -#define HDMI_HI2CTDR1 0x1248 - -#define I2C_STAT_INIT 0 -#define I2C_READ_DONE 1 -#define I2C_TRANSACTION_DONE 2 - -struct hdmi_i2c_dev { - struct i2c_adapter *adap; - struct mutex i2c_lock; - struct completion complete; - int status; - struct i2c_msg *msg; - int buf_offset; -}; - -static void hdmi_i2c_irq_enable(struct mrst_hdmi_dev *hdmi_dev) -{ - u32 temp; - - temp = HDMI_READ(HDMI_HICR); - temp |= (HDMI_INTR_I2C_ERROR | HDMI_INTR_I2C_FULL | HDMI_INTR_I2C_DONE); - HDMI_WRITE(HDMI_HICR, temp); - HDMI_READ(HDMI_HICR); -} - -static void hdmi_i2c_irq_disable(struct mrst_hdmi_dev *hdmi_dev) -{ - HDMI_WRITE(HDMI_HICR, 0x0); - HDMI_READ(HDMI_HICR); -} - -static int xfer_read(struct i2c_adapter *adap, struct i2c_msg *pmsg) -{ - struct mrst_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap); - struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; - u32 temp; - - i2c_dev->status = I2C_STAT_INIT; - i2c_dev->msg = pmsg; - i2c_dev->buf_offset = 0; - INIT_COMPLETION(i2c_dev->complete); - - /* Enable I2C transaction */ - temp = ((pmsg->len) << 20) | HI2C_EDID_READ | HI2C_ENABLE_TRANSACTION; - HDMI_WRITE(HDMI_HI2CHCR, temp); - HDMI_READ(HDMI_HI2CHCR); - - while (i2c_dev->status != I2C_TRANSACTION_DONE) - wait_for_completion_interruptible_timeout(&i2c_dev->complete, - 10 * HZ); - - return 0; -} - -static int xfer_write(struct i2c_adapter *adap, struct i2c_msg *pmsg) -{ - /* - * XXX: i2c write seems isn't useful for EDID probe, don't do anything - */ - return 0; -} - -static int mrst_hdmi_i2c_access(struct i2c_adapter *adap, - struct i2c_msg *pmsg, - int num) -{ - struct mrst_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap); - struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; - int i, err = 0; - - mutex_lock(&i2c_dev->i2c_lock); - - /* Enable i2c unit */ - HDMI_WRITE(HDMI_ICRH, 0x00008760); - - /* Enable irq */ - hdmi_i2c_irq_enable(hdmi_dev); - for (i = 0; i < num; i++) { - if (pmsg->len && pmsg->buf) { - if (pmsg->flags & I2C_M_RD) - err = xfer_read(adap, pmsg); - else - err = xfer_write(adap, pmsg); - } - pmsg++; /* next message */ - } - - /* Disable irq */ - hdmi_i2c_irq_disable(hdmi_dev); - - mutex_unlock(&i2c_dev->i2c_lock); - - return i; -} - -static u32 mrst_hdmi_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR; -} - -static const struct i2c_algorithm mrst_hdmi_i2c_algorithm = { - .master_xfer = mrst_hdmi_i2c_access, - .functionality = mrst_hdmi_i2c_func, -}; - -static struct i2c_adapter mrst_hdmi_i2c_adapter = { - .name = "mrst_hdmi_i2c", - .nr = 3, - .owner = THIS_MODULE, - .class = I2C_CLASS_DDC, - .algo = &mrst_hdmi_i2c_algorithm, -}; - -static void hdmi_i2c_read(struct mrst_hdmi_dev *hdmi_dev) -{ - struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; - struct i2c_msg *msg = i2c_dev->msg; - u8 *buf = msg->buf; - u32 temp; - int i, offset; - - offset = i2c_dev->buf_offset; - for (i = 0; i < 0x10; i++) { - temp = HDMI_READ(HDMI_HI2CRDB0 + (i * 4)); - memcpy(buf + (offset + i * 4), &temp, 4); - } - i2c_dev->buf_offset += (0x10 * 4); - - /* clearing read buffer full intr */ - temp = HDMI_READ(HDMI_HISR); - HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_FULL); - HDMI_READ(HDMI_HISR); - - /* continue read transaction */ - temp = HDMI_READ(HDMI_HI2CHCR); - HDMI_WRITE(HDMI_HI2CHCR, temp | HI2C_READ_CONTINUE); - HDMI_READ(HDMI_HI2CHCR); - - i2c_dev->status = I2C_READ_DONE; - return; -} - -static void hdmi_i2c_transaction_done(struct mrst_hdmi_dev *hdmi_dev) -{ - struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; - u32 temp; - - /* clear transaction done intr */ - temp = HDMI_READ(HDMI_HISR); - HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_DONE); - HDMI_READ(HDMI_HISR); - - - temp = HDMI_READ(HDMI_HI2CHCR); - HDMI_WRITE(HDMI_HI2CHCR, temp & ~HI2C_ENABLE_TRANSACTION); - HDMI_READ(HDMI_HI2CHCR); - - i2c_dev->status = I2C_TRANSACTION_DONE; - return; -} - -static irqreturn_t mrst_hdmi_i2c_handler(int this_irq, void *dev) -{ - struct mrst_hdmi_dev *hdmi_dev = dev; - struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; - u32 stat; - - stat = HDMI_READ(HDMI_HISR); - - if (stat & HDMI_INTR_HPD) { - HDMI_WRITE(HDMI_HISR, stat | HDMI_INTR_HPD); - HDMI_READ(HDMI_HISR); - } - - if (stat & HDMI_INTR_I2C_FULL) - hdmi_i2c_read(hdmi_dev); - - if (stat & HDMI_INTR_I2C_DONE) - hdmi_i2c_transaction_done(hdmi_dev); - - complete(&i2c_dev->complete); - - return IRQ_HANDLED; -} - -/* - * choose alternate function 2 of GPIO pin 52, 53, - * which is used by HDMI I2C logic - */ -static void mrst_hdmi_i2c_gpio_fix(void) -{ - void *base; - unsigned int gpio_base = 0xff12c000; - int gpio_len = 0x1000; - u32 temp; - - base = ioremap((resource_size_t)gpio_base, gpio_len); - if (base == NULL) { - DRM_ERROR("gpio ioremap fail\n"); - return; - } - - temp = readl(base + 0x44); - DRM_DEBUG_DRIVER("old gpio val %x\n", temp); - writel((temp | 0x00000a00), (base + 0x44)); - temp = readl(base + 0x44); - DRM_DEBUG_DRIVER("new gpio val %x\n", temp); - - iounmap(base); -} - -int mrst_hdmi_i2c_init(struct pci_dev *dev) -{ - struct mrst_hdmi_dev *hdmi_dev; - struct hdmi_i2c_dev *i2c_dev; - int ret; - - hdmi_dev = pci_get_drvdata(dev); - - i2c_dev = kzalloc(sizeof(struct hdmi_i2c_dev), GFP_KERNEL); - if (i2c_dev == NULL) { - DRM_ERROR("Can't allocate interface\n"); - ret = -ENOMEM; - goto exit; - } - - i2c_dev->adap = &mrst_hdmi_i2c_adapter; - i2c_dev->status = I2C_STAT_INIT; - init_completion(&i2c_dev->complete); - mutex_init(&i2c_dev->i2c_lock); - i2c_set_adapdata(&mrst_hdmi_i2c_adapter, hdmi_dev); - hdmi_dev->i2c_dev = i2c_dev; - - /* Enable HDMI I2C function on gpio */ - mrst_hdmi_i2c_gpio_fix(); - - /* request irq */ - ret = request_irq(dev->irq, mrst_hdmi_i2c_handler, IRQF_SHARED, - mrst_hdmi_i2c_adapter.name, hdmi_dev); - if (ret) { - DRM_ERROR("Failed to request IRQ for I2C controller\n"); - goto err; - } - - /* Adapter registration */ - ret = i2c_add_numbered_adapter(&mrst_hdmi_i2c_adapter); - return ret; - -err: - kfree(i2c_dev); -exit: - return ret; -} - -void mrst_hdmi_i2c_exit(struct pci_dev *dev) -{ - struct mrst_hdmi_dev *hdmi_dev; - struct hdmi_i2c_dev *i2c_dev; - - hdmi_dev = pci_get_drvdata(dev); - if (i2c_del_adapter(&mrst_hdmi_i2c_adapter)) - DRM_DEBUG_DRIVER("Failed to delete hdmi-i2c adapter\n"); - - i2c_dev = hdmi_dev->i2c_dev; - kfree(i2c_dev); - free_irq(dev->irq, hdmi_dev); -} diff --git a/drivers/staging/gma500/mrst_lvds.c b/drivers/staging/gma500/mrst_lvds.c deleted file mode 100644 index e7999a2a3796..000000000000 --- a/drivers/staging/gma500/mrst_lvds.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Copyright © 2006-2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - * Dave Airlie - * Jesse Barnes - */ - -#include -#include -#include - -#include "intel_bios.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "power.h" -#include - -/* The max/min PWM frequency in BPCR[31:17] - */ -/* The smallest number is 1 (not 0) that can fit in the - * 15-bit field of the and then*/ -/* shifts to the left by one bit to get the actual 16-bit - * value that the 15-bits correspond to.*/ -#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF -#define BRIGHTNESS_MAX_LEVEL 100 - -/** - * Sets the power state for the panel. - */ -static void mrst_lvds_set_power(struct drm_device *dev, - struct psb_intel_output *output, bool on) -{ - u32 pp_status; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (!gma_power_begin(dev, true)) - return; - - if (on) { - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | - POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); - dev_priv->is_lvds_on = true; - if (dev_priv->ops->lvds_bl_power) - dev_priv->ops->lvds_bl_power(dev, true); - } else { - if (dev_priv->ops->lvds_bl_power) - dev_priv->ops->lvds_bl_power(dev, false); - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & - ~POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while (pp_status & PP_ON); - dev_priv->is_lvds_on = false; - pm_request_idle(&dev->pdev->dev); - } - gma_power_end(dev); -} - -static void mrst_lvds_dpms(struct drm_encoder *encoder, int mode) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - - if (mode == DRM_MODE_DPMS_ON) - mrst_lvds_set_power(dev, output, true); - else - mrst_lvds_set_power(dev, output, false); - - /* XXX: We never power down the LVDS pairs. */ -} - -static void mrst_lvds_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct psb_intel_mode_device *mode_dev = - enc_to_psb_intel_output(encoder)->mode_dev; - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 lvds_port; - uint64_t v = DRM_MODE_SCALE_FULLSCREEN; - - if (!gma_power_begin(dev, true)) - return; - - /* - * The LVDS pin pair will already have been turned on in the - * psb_intel_crtc_mode_set since it has a large impact on the DPLL - * settings. - */ - lvds_port = (REG_READ(LVDS) & - (~LVDS_PIPEB_SELECT)) | - LVDS_PORT_EN | - LVDS_BORDER_EN; - - /* If the firmware says dither on Moorestown, or the BIOS does - on Oaktrail then enable dithering */ - if (mode_dev->panel_wants_dither || dev_priv->lvds_dither) - lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; - - REG_WRITE(LVDS, lvds_port); - - drm_connector_property_get_value( - &enc_to_psb_intel_output(encoder)->base, - dev->mode_config.scaling_mode_property, - &v); - - if (v == DRM_MODE_SCALE_NO_SCALE) - REG_WRITE(PFIT_CONTROL, 0); - else if (v == DRM_MODE_SCALE_ASPECT) { - if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || - (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { - if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == - (mode->hdisplay * adjusted_mode->crtc_vdisplay)) - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); - else if ((adjusted_mode->crtc_hdisplay * - mode->vdisplay) > (mode->hdisplay * - adjusted_mode->crtc_vdisplay)) - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | - PFIT_SCALING_MODE_PILLARBOX); - else - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | - PFIT_SCALING_MODE_LETTERBOX); - } else - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); - } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); - - gma_power_end(dev); -} - -static void mrst_lvds_prepare(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct psb_intel_mode_device *mode_dev = output->mode_dev; - - if (!gma_power_begin(dev, true)) - return; - - mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); - mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & - BACKLIGHT_DUTY_CYCLE_MASK); - mrst_lvds_set_power(dev, output, false); - gma_power_end(dev); -} - -static u32 mrst_lvds_get_max_backlight(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 ret; - - if (gma_power_begin(dev, false)) { - ret = ((REG_READ(BLC_PWM_CTL) & - BACKLIGHT_MODULATION_FREQ_MASK) >> - BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; - - gma_power_end(dev); - } else - ret = ((dev_priv->saveBLC_PWM_CTL & - BACKLIGHT_MODULATION_FREQ_MASK) >> - BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; - - return ret; -} - -static void mrst_lvds_commit(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct psb_intel_mode_device *mode_dev = output->mode_dev; - - if (mode_dev->backlight_duty_cycle == 0) - mode_dev->backlight_duty_cycle = - mrst_lvds_get_max_backlight(dev); - mrst_lvds_set_power(dev, output, true); -} - -static const struct drm_encoder_helper_funcs mrst_lvds_helper_funcs = { - .dpms = mrst_lvds_dpms, - .mode_fixup = psb_intel_lvds_mode_fixup, - .prepare = mrst_lvds_prepare, - .mode_set = mrst_lvds_mode_set, - .commit = mrst_lvds_commit, -}; - -static struct drm_display_mode lvds_configuration_modes[] = { - /* hard coded fixed mode for TPO LTPS LPJ040K001A */ - { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 33264, 800, 836, - 846, 1056, 0, 480, 489, 491, 525, 0, 0) }, - /* hard coded fixed mode for LVDS 800x480 */ - { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 30994, 800, 801, - 802, 1024, 0, 480, 481, 482, 525, 0, 0) }, - /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ - { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072, - 1104, 1184, 0, 600, 603, 604, 608, 0, 0) }, - /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ - { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104, - 1136, 1184, 0, 600, 603, 604, 608, 0, 0) }, - /* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */ - { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124, - 1204, 1312, 0, 600, 607, 610, 621, 0, 0) }, - /* hard coded fixed mode for LVDS 1024x768 */ - { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, - 1184, 1344, 0, 768, 771, 777, 806, 0, 0) }, - /* hard coded fixed mode for LVDS 1366x768 */ - { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430, - 1558, 1664, 0, 768, 769, 770, 776, 0, 0) }, -}; - -/* Returns the panel fixed mode from configuration. */ - -static struct drm_display_mode * -mrst_lvds_get_configuration_mode(struct drm_device *dev) -{ - struct drm_display_mode *mode = NULL; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_timing_info *ti = &dev_priv->gct_data.DTD; - - if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/ - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) - return NULL; - - mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; - mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; - mode->hsync_start = mode->hdisplay + \ - ((ti->hsync_offset_hi << 8) | \ - ti->hsync_offset_lo); - mode->hsync_end = mode->hsync_start + \ - ((ti->hsync_pulse_width_hi << 8) | \ - ti->hsync_pulse_width_lo); - mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ - ti->hblank_lo); - mode->vsync_start = \ - mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ - ti->vsync_offset_lo); - mode->vsync_end = \ - mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ - ti->vsync_pulse_width_lo); - mode->vtotal = mode->vdisplay + \ - ((ti->vblank_hi << 8) | ti->vblank_lo); - mode->clock = ti->pixel_clock * 10; -#if 0 - printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay); - printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay); - printk(KERN_INFO "HSS is %d\n", mode->hsync_start); - printk(KERN_INFO "HSE is %d\n", mode->hsync_end); - printk(KERN_INFO "htotal is %d\n", mode->htotal); - printk(KERN_INFO "VSS is %d\n", mode->vsync_start); - printk(KERN_INFO "VSE is %d\n", mode->vsync_end); - printk(KERN_INFO "vtotal is %d\n", mode->vtotal); - printk(KERN_INFO "clock is %d\n", mode->clock); -#endif - } else - mode = drm_mode_duplicate(dev, &lvds_configuration_modes[2]); - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - return mode; -} - -/** - * mrst_lvds_init - setup LVDS connectors on this device - * @dev: drm device - * - * Create the connector, register the LVDS DDC bus, and try to figure out what - * modes we can display on the LVDS panel (if present). - */ -void mrst_lvds_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev) -{ - struct psb_intel_output *psb_intel_output; - struct drm_connector *connector; - struct drm_encoder *encoder; - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - struct edid *edid; - int ret = 0; - struct i2c_adapter *i2c_adap; - struct drm_display_mode *scan; /* *modes, *bios_mode; */ - - psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL); - if (!psb_intel_output) - return; - - psb_intel_output->mode_dev = mode_dev; - connector = &psb_intel_output->base; - encoder = &psb_intel_output->enc; - dev_priv->is_lvds_on = true; - drm_connector_init(dev, &psb_intel_output->base, - &psb_intel_lvds_connector_funcs, - DRM_MODE_CONNECTOR_LVDS); - - drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs, - DRM_MODE_ENCODER_LVDS); - - drm_mode_connector_attach_encoder(&psb_intel_output->base, - &psb_intel_output->enc); - psb_intel_output->type = INTEL_OUTPUT_LVDS; - - drm_encoder_helper_add(encoder, &mrst_lvds_helper_funcs); - drm_connector_helper_add(connector, - &psb_intel_lvds_connector_helper_funcs); - connector->display_info.subpixel_order = SubPixelHorizontalRGB; - connector->interlace_allowed = false; - connector->doublescan_allowed = false; - - drm_connector_attach_property(connector, - dev->mode_config.scaling_mode_property, - DRM_MODE_SCALE_FULLSCREEN); - drm_connector_attach_property(connector, - dev_priv->backlight_property, - BRIGHTNESS_MAX_LEVEL); - - mode_dev->panel_wants_dither = false; - if (dev_priv->vbt_data.size != 0x00) - mode_dev->panel_wants_dither = (dev_priv->gct_data. - Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); - - /* - * LVDS discovery: - * 1) check for EDID on DDC - * 2) check for VBT data - * 3) check to see if LVDS is already on - * if none of the above, no panel - * 4) make sure lid is open - * if closed, act like it's not there for now - */ - - i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus); - - if (i2c_adap == NULL) - dev_err(dev->dev, "No ddc adapter available!\n"); - /* - * Attempt to get the fixed panel mode from DDC. Assume that the - * preferred mode is the right one. - */ - if (i2c_adap) { - edid = drm_get_edid(connector, i2c_adap); - if (edid) { - drm_mode_connector_update_edid_property(connector, - edid); - ret = drm_add_edid_modes(connector, edid); - kfree(edid); - } - - list_for_each_entry(scan, &connector->probed_modes, head) { - if (scan->type & DRM_MODE_TYPE_PREFERRED) { - mode_dev->panel_fixed_mode = - drm_mode_duplicate(dev, scan); - goto out; /* FIXME: check for quirks */ - } - } - } - /* - * If we didn't get EDID, try geting panel timing - * from configuration data - */ - mode_dev->panel_fixed_mode = mrst_lvds_get_configuration_mode(dev); - - if (mode_dev->panel_fixed_mode) { - mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; - goto out; /* FIXME: check for quirks */ - } - - /* If we still don't have a mode after all that, give up. */ - if (!mode_dev->panel_fixed_mode) { - dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); - goto failed_find; - } - -out: - drm_sysfs_connector_add(connector); - return; - -failed_find: - dev_dbg(dev->dev, "No LVDS modes found, disabling.\n"); - if (psb_intel_output->ddc_bus) - psb_intel_i2c_destroy(psb_intel_output->ddc_bus); - -/* failed_ddc: */ - - drm_encoder_cleanup(encoder); - drm_connector_cleanup(connector); - kfree(connector); -} - diff --git a/drivers/staging/gma500/power.c b/drivers/staging/gma500/power.c deleted file mode 100644 index 408257038335..000000000000 --- a/drivers/staging/gma500/power.c +++ /dev/null @@ -1,318 +0,0 @@ -/************************************************************************** - * Copyright (c) 2009-2011, Intel Corporation. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * Authors: - * Benjamin Defnet - * Rajesh Poornachandran - * Massively reworked - * Alan Cox - */ - -#include "power.h" -#include "psb_drv.h" -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include -#include - -static struct mutex power_mutex; /* Serialize power ops */ -static spinlock_t power_ctrl_lock; /* Serialize power claim */ - -/** - * gma_power_init - initialise power manager - * @dev: our device - * - * Set up for power management tracking of our hardware. - */ -void gma_power_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - /* FIXME: Move APM/OSPM base into relevant device code */ - dev_priv->apm_base = dev_priv->apm_reg & 0xffff; - dev_priv->ospm_base &= 0xffff; - - dev_priv->display_power = true; /* We start active */ - dev_priv->display_count = 0; /* Currently no users */ - dev_priv->suspended = false; /* And not suspended */ - spin_lock_init(&power_ctrl_lock); - mutex_init(&power_mutex); - - dev_priv->ops->init_pm(dev); -} - -/** - * gma_power_uninit - end power manager - * @dev: device to end for - * - * Undo the effects of gma_power_init - */ -void gma_power_uninit(struct drm_device *dev) -{ - pm_runtime_disable(&dev->pdev->dev); - pm_runtime_set_suspended(&dev->pdev->dev); -} - -/** - * gma_suspend_display - suspend the display logic - * @dev: our DRM device - * - * Suspend the display logic of the graphics interface - */ -static void gma_suspend_display(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - if (!dev_priv->display_power) - return; - dev_priv->ops->save_regs(dev); - dev_priv->ops->power_down(dev); - dev_priv->display_power = false; -} - -/** - * gma_resume_display - resume display side logic - * - * Resume the display hardware restoring state and enabling - * as necessary. - */ -static void gma_resume_display(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); - struct drm_psb_private *dev_priv = dev->dev_private; - - if (dev_priv->display_power) - return; - - /* turn on the display power island */ - dev_priv->ops->power_up(dev); - dev_priv->suspended = false; - dev_priv->display_power = true; - - PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL); - pci_write_config_word(pdev, PSB_GMCH_CTRL, - dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED); - dev_priv->ops->restore_regs(dev); -} - -/** - * gma_suspend_pci - suspend PCI side - * @pdev: PCI device - * - * Perform the suspend processing on our PCI device state - */ -static void gma_suspend_pci(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); - struct drm_psb_private *dev_priv = dev->dev_private; - int bsm, vbt; - - if (dev_priv->suspended) - return; - - pci_save_state(pdev); - pci_read_config_dword(pdev, 0x5C, &bsm); - dev_priv->saveBSM = bsm; - pci_read_config_dword(pdev, 0xFC, &vbt); - dev_priv->saveVBT = vbt; - pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr); - pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data); - - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - - dev_priv->suspended = true; -} - -/** - * gma_resume_pci - resume helper - * @dev: our PCI device - * - * Perform the resume processing on our PCI device state - rewrite - * register state and re-enable the PCI device - */ -static bool gma_resume_pci(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); - struct drm_psb_private *dev_priv = dev->dev_private; - int ret; - - if (!dev_priv->suspended) - return true; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_write_config_dword(pdev, 0x5c, dev_priv->saveBSM); - pci_write_config_dword(pdev, 0xFC, dev_priv->saveVBT); - /* restoring MSI address and data in PCIx space */ - pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr); - pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data); - ret = pci_enable_device(pdev); - - if (ret != 0) - dev_err(&pdev->dev, "pci_enable failed: %d\n", ret); - else - dev_priv->suspended = false; - return !dev_priv->suspended; -} - -/** - * gma_power_suspend - bus callback for suspend - * @pdev: our PCI device - * @state: suspend type - * - * Called back by the PCI layer during a suspend of the system. We - * perform the necessary shut down steps and save enough state that - * we can undo this when resume is called. - */ -int gma_power_suspend(struct device *_dev) -{ - struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev); - struct drm_device *dev = pci_get_drvdata(pdev); - struct drm_psb_private *dev_priv = dev->dev_private; - - mutex_lock(&power_mutex); - if (!dev_priv->suspended) { - if (dev_priv->display_count) { - mutex_unlock(&power_mutex); - return -EBUSY; - } - psb_irq_uninstall(dev); - gma_suspend_display(dev); - gma_suspend_pci(pdev); - } - mutex_unlock(&power_mutex); - return 0; -} - -/** - * gma_power_resume - resume power - * @pdev: PCI device - * - * Resume the PCI side of the graphics and then the displays - */ -int gma_power_resume(struct device *_dev) -{ - struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev); - struct drm_device *dev = pci_get_drvdata(pdev); - - mutex_lock(&power_mutex); - gma_resume_pci(pdev); - gma_resume_display(pdev); - psb_irq_preinstall(dev); - psb_irq_postinstall(dev); - mutex_unlock(&power_mutex); - return 0; -} - -/** - * gma_power_is_on - returne true if power is on - * @dev: our DRM device - * - * Returns true if the display island power is on at this moment - */ -bool gma_power_is_on(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - return dev_priv->display_power; -} - -/** - * gma_power_begin - begin requiring power - * @dev: our DRM device - * @force_on: true to force power on - * - * Begin an action that requires the display power island is enabled. - * We refcount the islands. - */ -bool gma_power_begin(struct drm_device *dev, bool force_on) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - int ret; - unsigned long flags; - - spin_lock_irqsave(&power_ctrl_lock, flags); - /* Power already on ? */ - if (dev_priv->display_power) { - dev_priv->display_count++; - pm_runtime_get(&dev->pdev->dev); - spin_unlock_irqrestore(&power_ctrl_lock, flags); - return true; - } - if (force_on == false) - goto out_false; - - /* Ok power up needed */ - ret = gma_resume_pci(dev->pdev); - if (ret == 0) { - /* FIXME: we want to defer this for Medfield/Oaktrail */ - gma_resume_display(dev->pdev); - psb_irq_preinstall(dev); - psb_irq_postinstall(dev); - pm_runtime_get(&dev->pdev->dev); - dev_priv->display_count++; - spin_unlock_irqrestore(&power_ctrl_lock, flags); - return true; - } -out_false: - spin_unlock_irqrestore(&power_ctrl_lock, flags); - return false; -} - -/** - * gma_power_end - end use of power - * @dev: Our DRM device - * - * Indicate that one of our gma_power_begin() requested periods when - * the diplay island power is needed has completed. - */ -void gma_power_end(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long flags; - spin_lock_irqsave(&power_ctrl_lock, flags); - dev_priv->display_count--; - WARN_ON(dev_priv->display_count < 0); - spin_unlock_irqrestore(&power_ctrl_lock, flags); - pm_runtime_put(&dev->pdev->dev); -} - -int psb_runtime_suspend(struct device *dev) -{ - return gma_power_suspend(dev); -} - -int psb_runtime_resume(struct device *dev) -{ - return gma_power_resume(dev);; -} - -int psb_runtime_idle(struct device *dev) -{ - struct drm_device *drmdev = pci_get_drvdata(to_pci_dev(dev)); - struct drm_psb_private *dev_priv = drmdev->dev_private; - if (dev_priv->display_count) - return 0; - else - return 1; -} diff --git a/drivers/staging/gma500/power.h b/drivers/staging/gma500/power.h deleted file mode 100644 index 1969d2ecb328..000000000000 --- a/drivers/staging/gma500/power.h +++ /dev/null @@ -1,67 +0,0 @@ -/************************************************************************** - * Copyright (c) 2009-2011, Intel Corporation. - * All Rights Reserved. - - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * Authors: - * Benjamin Defnet - * Rajesh Poornachandran - * Massively reworked - * Alan Cox - */ -#ifndef _PSB_POWERMGMT_H_ -#define _PSB_POWERMGMT_H_ - -#include -#include - -void gma_power_init(struct drm_device *dev); -void gma_power_uninit(struct drm_device *dev); - -/* - * The kernel bus power management will call these functions - */ -int gma_power_suspend(struct device *dev); -int gma_power_resume(struct device *dev); - -/* - * These are the functions the driver should use to wrap all hw access - * (i.e. register reads and writes) - */ -bool gma_power_begin(struct drm_device *dev, bool force); -void gma_power_end(struct drm_device *dev); - -/* - * Use this function to do an instantaneous check for if the hw is on. - * Only use this in cases where you know the mutex is already held such - * as in irq install/uninstall and you need to - * prevent a deadlock situation. Otherwise use gma_power_begin(). - */ -bool gma_power_is_on(struct drm_device *dev); - -/* - * GFX-Runtime PM callbacks - */ -int psb_runtime_suspend(struct device *dev); -int psb_runtime_resume(struct device *dev); -int psb_runtime_idle(struct device *dev); - -#endif /*_PSB_POWERMGMT_H_*/ diff --git a/drivers/staging/gma500/psb_device.c b/drivers/staging/gma500/psb_device.c deleted file mode 100644 index b97aa78519f2..000000000000 --- a/drivers/staging/gma500/psb_device.c +++ /dev/null @@ -1,321 +0,0 @@ -/************************************************************************** - * Copyright (c) 2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#include -#include -#include -#include "psb_drm.h" -#include "psb_drv.h" -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include "intel_bios.h" - - -static int psb_output_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - psb_intel_lvds_init(dev, &dev_priv->mode_dev); - psb_intel_sdvo_init(dev, SDVOB); - return 0; -} - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - -/* - * Poulsbo Backlight Interfaces - */ - -#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ -#define BLC_PWM_FREQ_CALC_CONSTANT 32 -#define MHz 1000000 - -#define PSB_BLC_PWM_PRECISION_FACTOR 10 -#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE -#define PSB_BLC_MIN_PWM_REG_FREQ 0x2 - -#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) -#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) - -static int psb_brightness; -static struct backlight_device *psb_backlight_device; - -static int psb_get_brightness(struct backlight_device *bd) -{ - /* return locally cached var instead of HW read (due to DPST etc.) */ - /* FIXME: ideally return actual value in case firmware fiddled with - it */ - return psb_brightness; -} - - -static int psb_backlight_setup(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long core_clock; - /* u32 bl_max_freq; */ - /* unsigned long value; */ - u16 bl_max_freq; - uint32_t value; - uint32_t blc_pwm_precision_factor; - - /* get bl_max_freq and pol from dev_priv*/ - if (!dev_priv->lvds_bl) { - dev_err(dev->dev, "Has no valid LVDS backlight info\n"); - return -ENOENT; - } - bl_max_freq = dev_priv->lvds_bl->freq; - blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR; - - core_clock = dev_priv->core_freq; - - value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; - value *= blc_pwm_precision_factor; - value /= bl_max_freq; - value /= blc_pwm_precision_factor; - - if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ || - value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ) - return -ERANGE; - else { - value &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR; - REG_WRITE(BLC_PWM_CTL, - (value << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (value)); - } - return 0; -} - -static int psb_set_brightness(struct backlight_device *bd) -{ - struct drm_device *dev = bl_get_data(psb_backlight_device); - int level = bd->props.brightness; - - /* Percentage 1-100% being valid */ - if (level < 1) - level = 1; - - psb_intel_lvds_set_brightness(dev, level); - psb_brightness = level; - return 0; -} - -static const struct backlight_ops psb_ops = { - .get_brightness = psb_get_brightness, - .update_status = psb_set_brightness, -}; - -static int psb_backlight_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - int ret; - struct backlight_properties props; - - memset(&props, 0, sizeof(struct backlight_properties)); - props.max_brightness = 100; - props.type = BACKLIGHT_PLATFORM; - - psb_backlight_device = backlight_device_register("psb-bl", - NULL, (void *)dev, &psb_ops, &props); - if (IS_ERR(psb_backlight_device)) - return PTR_ERR(psb_backlight_device); - - ret = psb_backlight_setup(dev); - if (ret < 0) { - backlight_device_unregister(psb_backlight_device); - psb_backlight_device = NULL; - return ret; - } - psb_backlight_device->props.brightness = 100; - psb_backlight_device->props.max_brightness = 100; - backlight_update_status(psb_backlight_device); - dev_priv->backlight_device = psb_backlight_device; - return 0; -} - -#endif - -/* - * Provide the Poulsbo specific chip logic and low level methods - * for power management - */ - -static void psb_init_pm(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL); - gating &= ~3; /* Disable 2D clock gating */ - gating |= 1; - PSB_WSGX32(gating, PSB_CR_CLKGATECTL); - PSB_RSGX32(PSB_CR_CLKGATECTL); -} - -/** - * psb_save_display_registers - save registers lost on suspend - * @dev: our DRM device - * - * Save the state we need in order to be able to restore the interface - * upon resume from suspend - */ -static int psb_save_display_registers(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc; - struct drm_connector *connector; - - /* Display arbitration control + watermarks */ - dev_priv->saveDSPARB = PSB_RVDC32(DSPARB); - dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1); - dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2); - dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3); - dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4); - dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5); - dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6); - dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT); - - /* Save crtc and output state */ - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - if (drm_helper_crtc_in_use(crtc)) - crtc->funcs->save(crtc); - } - - list_for_each_entry(connector, &dev->mode_config.connector_list, head) - connector->funcs->save(connector); - - mutex_unlock(&dev->mode_config.mutex); - return 0; -} - -/** - * psb_restore_display_registers - restore lost register state - * @dev: our DRM device - * - * Restore register state that was lost during suspend and resume. - */ -static int psb_restore_display_registers(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc; - struct drm_connector *connector; - - /* Display arbitration + watermarks */ - PSB_WVDC32(dev_priv->saveDSPARB, DSPARB); - PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1); - PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2); - PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3); - PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4); - PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5); - PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6); - PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT); - - /*make sure VGA plane is off. it initializes to on after reset!*/ - PSB_WVDC32(0x80000000, VGACNTRL); - - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) - if (drm_helper_crtc_in_use(crtc)) - crtc->funcs->restore(crtc); - - list_for_each_entry(connector, &dev->mode_config.connector_list, head) - connector->funcs->restore(connector); - - mutex_unlock(&dev->mode_config.mutex); - return 0; -} - -static int psb_power_down(struct drm_device *dev) -{ - return 0; -} - -static int psb_power_up(struct drm_device *dev) -{ - return 0; -} - -static void psb_get_core_freq(struct drm_device *dev) -{ - uint32_t clock; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - struct drm_psb_private *dev_priv = dev->dev_private; - - /*pci_write_config_dword(pci_root, 0xD4, 0x00C32004);*/ - /*pci_write_config_dword(pci_root, 0xD0, 0xE0033000);*/ - - pci_write_config_dword(pci_root, 0xD0, 0xD0050300); - pci_read_config_dword(pci_root, 0xD4, &clock); - pci_dev_put(pci_root); - - switch (clock & 0x07) { - case 0: - dev_priv->core_freq = 100; - break; - case 1: - dev_priv->core_freq = 133; - break; - case 2: - dev_priv->core_freq = 150; - break; - case 3: - dev_priv->core_freq = 178; - break; - case 4: - dev_priv->core_freq = 200; - break; - case 5: - case 6: - case 7: - dev_priv->core_freq = 266; - default: - dev_priv->core_freq = 0; - } -} - -static int psb_chip_setup(struct drm_device *dev) -{ - psb_get_core_freq(dev); - gma_intel_opregion_init(dev); - psb_intel_init_bios(dev); - return 0; -} - -const struct psb_ops psb_chip_ops = { - .name = "Poulsbo", - .accel_2d = 1, - .pipes = 2, - .crtcs = 2, - .sgx_offset = PSB_SGX_OFFSET, - .chip_setup = psb_chip_setup, - - .crtc_helper = &psb_intel_helper_funcs, - .crtc_funcs = &psb_intel_crtc_funcs, - - .output_init = psb_output_init, - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - .backlight_init = psb_backlight_init, -#endif - - .init_pm = psb_init_pm, - .save_regs = psb_save_display_registers, - .restore_regs = psb_restore_display_registers, - .power_down = psb_power_down, - .power_up = psb_power_up, -}; - diff --git a/drivers/staging/gma500/psb_drm.h b/drivers/staging/gma500/psb_drm.h deleted file mode 100644 index 0da846835688..000000000000 --- a/drivers/staging/gma500/psb_drm.h +++ /dev/null @@ -1,219 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007-2011, Intel Corporation. - * All Rights Reserved. - * Copyright (c) 2008, Tungsten Graphics Inc. Cedar Park, TX., USA. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#ifndef _PSB_DRM_H_ -#define _PSB_DRM_H_ - -#define PSB_NUM_PIPE 3 - -#define PSB_GPU_ACCESS_READ (1ULL << 32) -#define PSB_GPU_ACCESS_WRITE (1ULL << 33) -#define PSB_GPU_ACCESS_MASK (PSB_GPU_ACCESS_READ | PSB_GPU_ACCESS_WRITE) - -#define PSB_BO_FLAG_COMMAND (1ULL << 52) - -/* - * Feedback components: - */ - -struct drm_psb_sizes_arg { - u32 ta_mem_size; - u32 mmu_size; - u32 pds_size; - u32 rastgeom_size; - u32 tt_size; - u32 vram_size; -}; - -struct drm_psb_dpst_lut_arg { - uint8_t lut[256]; - int output_id; -}; - -#define PSB_DC_CRTC_SAVE 0x01 -#define PSB_DC_CRTC_RESTORE 0x02 -#define PSB_DC_OUTPUT_SAVE 0x04 -#define PSB_DC_OUTPUT_RESTORE 0x08 -#define PSB_DC_CRTC_MASK 0x03 -#define PSB_DC_OUTPUT_MASK 0x0C - -struct drm_psb_dc_state_arg { - u32 flags; - u32 obj_id; -}; - -struct drm_psb_mode_operation_arg { - u32 obj_id; - u16 operation; - struct drm_mode_modeinfo mode; - void *data; -}; - -struct drm_psb_stolen_memory_arg { - u32 base; - u32 size; -}; - -/*Display Register Bits*/ -#define REGRWBITS_PFIT_CONTROLS (1 << 0) -#define REGRWBITS_PFIT_AUTOSCALE_RATIOS (1 << 1) -#define REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS (1 << 2) -#define REGRWBITS_PIPEASRC (1 << 3) -#define REGRWBITS_PIPEBSRC (1 << 4) -#define REGRWBITS_VTOTAL_A (1 << 5) -#define REGRWBITS_VTOTAL_B (1 << 6) -#define REGRWBITS_DSPACNTR (1 << 8) -#define REGRWBITS_DSPBCNTR (1 << 9) -#define REGRWBITS_DSPCCNTR (1 << 10) - -/*Overlay Register Bits*/ -#define OV_REGRWBITS_OVADD (1 << 0) -#define OV_REGRWBITS_OGAM_ALL (1 << 1) - -#define OVC_REGRWBITS_OVADD (1 << 2) -#define OVC_REGRWBITS_OGAM_ALL (1 << 3) - -struct drm_psb_register_rw_arg { - u32 b_force_hw_on; - - u32 display_read_mask; - u32 display_write_mask; - - struct { - u32 pfit_controls; - u32 pfit_autoscale_ratios; - u32 pfit_programmed_scale_ratios; - u32 pipeasrc; - u32 pipebsrc; - u32 vtotal_a; - u32 vtotal_b; - } display; - - u32 overlay_read_mask; - u32 overlay_write_mask; - - struct { - u32 OVADD; - u32 OGAMC0; - u32 OGAMC1; - u32 OGAMC2; - u32 OGAMC3; - u32 OGAMC4; - u32 OGAMC5; - u32 IEP_ENABLED; - u32 IEP_BLE_MINMAX; - u32 IEP_BSSCC_CONTROL; - u32 b_wait_vblank; - } overlay; - - u32 sprite_enable_mask; - u32 sprite_disable_mask; - - struct { - u32 dspa_control; - u32 dspa_key_value; - u32 dspa_key_mask; - u32 dspc_control; - u32 dspc_stride; - u32 dspc_position; - u32 dspc_linear_offset; - u32 dspc_size; - u32 dspc_surface; - } sprite; - - u32 subpicture_enable_mask; - u32 subpicture_disable_mask; -}; - -/* Controlling the kernel modesetting buffers */ - -#define DRM_PSB_SIZES 0x07 -#define DRM_PSB_FUSE_REG 0x08 -#define DRM_PSB_DC_STATE 0x0A -#define DRM_PSB_ADB 0x0B -#define DRM_PSB_MODE_OPERATION 0x0C -#define DRM_PSB_STOLEN_MEMORY 0x0D -#define DRM_PSB_REGISTER_RW 0x0E - -/* - * NOTE: Add new commands here, but increment - * the values below and increment their - * corresponding defines where they're - * defined elsewhere. - */ - -#define DRM_PSB_GEM_CREATE 0x10 -#define DRM_PSB_2D_OP 0x11 -#define DRM_PSB_GEM_MMAP 0x12 -#define DRM_PSB_DPST 0x1B -#define DRM_PSB_GAMMA 0x1C -#define DRM_PSB_DPST_BL 0x1D -#define DRM_PSB_GET_PIPE_FROM_CRTC_ID 0x1F - -#define PSB_MODE_OPERATION_MODE_VALID 0x01 -#define PSB_MODE_OPERATION_SET_DC_BASE 0x02 - -struct drm_psb_get_pipe_from_crtc_id_arg { - /** ID of CRTC being requested **/ - u32 crtc_id; - - /** pipe of requested CRTC **/ - u32 pipe; -}; - -/* FIXME: move this into a medfield header once we are sure it isn't needed for an - ioctl */ -struct psb_drm_dpu_rect { - int x, y; - int width, height; -}; - -struct drm_psb_gem_create { - __u64 size; - __u32 handle; - __u32 flags; -#define PSB_GEM_CREATE_STOLEN 1 /* Stolen memory can be used */ -}; - -#define PSB_2D_OP_BUFLEN 16 - -struct drm_psb_2d_op { - __u32 src; /* Handles, only src supported right now */ - __u32 dst; - __u32 mask; - __u32 pat; - __u32 size; /* In dwords of command */ - __u32 spare; /* And bumps array to u64 align */ - __u32 cmd[PSB_2D_OP_BUFLEN]; -}; - -struct drm_psb_gem_mmap { - __u32 handle; - __u32 pad; - /** - * Fake offset to use for subsequent mmap call - * - * This is a fixed-size type for 32/64 compatibility. - */ - __u64 offset; -}; - -#endif diff --git a/drivers/staging/gma500/psb_drv.c b/drivers/staging/gma500/psb_drv.c deleted file mode 100644 index 95816808f867..000000000000 --- a/drivers/staging/gma500/psb_drv.c +++ /dev/null @@ -1,1230 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007-2011, Intel Corporation. - * All Rights Reserved. - * Copyright (c) 2008, Tungsten Graphics, Inc. Cedar Park, TX., USA. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#include -#include -#include "psb_drm.h" -#include "psb_drv.h" -#include "framebuffer.h" -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include "intel_bios.h" -#include "mid_bios.h" -#include "mdfld_dsi_dbi.h" -#include -#include "power.h" -#include -#include -#include -#include -#include -#include - -static int drm_psb_trap_pagefaults; - -int drm_psb_no_fb; - -static int psb_probe(struct pci_dev *pdev, const struct pci_device_id *ent); - -MODULE_PARM_DESC(no_fb, "Disable FBdev"); -MODULE_PARM_DESC(trap_pagefaults, "Error and reset on MMU pagefaults"); -module_param_named(no_fb, drm_psb_no_fb, int, 0600); -module_param_named(trap_pagefaults, drm_psb_trap_pagefaults, int, 0600); - - -static DEFINE_PCI_DEVICE_TABLE(pciidlist) = { - { 0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops }, - { 0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops }, -#if defined(CONFIG_DRM_PSB_MRST) - { 0x8086, 0x4100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops}, - { 0x8086, 0x4101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops}, - { 0x8086, 0x4102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops}, - { 0x8086, 0x4103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops}, - { 0x8086, 0x4104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops}, - { 0x8086, 0x4105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops}, - { 0x8086, 0x4106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops}, - { 0x8086, 0x4107, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops}, -#endif -#if defined(CONFIG_DRM_PSB_MFLD) - { 0x8086, 0x0130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops}, - { 0x8086, 0x0131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops}, - { 0x8086, 0x0132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops}, - { 0x8086, 0x0133, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops}, - { 0x8086, 0x0134, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops}, - { 0x8086, 0x0135, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops}, - { 0x8086, 0x0136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops}, - { 0x8086, 0x0137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops}, -#endif -#if defined(CONFIG_DRM_PSB_CDV) - { 0x8086, 0x0be0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops}, - { 0x8086, 0x0be1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops}, - { 0x8086, 0x0be2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops}, - { 0x8086, 0x0be3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops}, - { 0x8086, 0x0be4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops}, - { 0x8086, 0x0be5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops}, - { 0x8086, 0x0be6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops}, - { 0x8086, 0x0be7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops}, -#endif - { 0, 0, 0} -}; -MODULE_DEVICE_TABLE(pci, pciidlist); - -/* - * Standard IOCTLs. - */ - -#define DRM_IOCTL_PSB_SIZES \ - DRM_IOR(DRM_PSB_SIZES + DRM_COMMAND_BASE, \ - struct drm_psb_sizes_arg) -#define DRM_IOCTL_PSB_FUSE_REG \ - DRM_IOWR(DRM_PSB_FUSE_REG + DRM_COMMAND_BASE, uint32_t) -#define DRM_IOCTL_PSB_DC_STATE \ - DRM_IOW(DRM_PSB_DC_STATE + DRM_COMMAND_BASE, \ - struct drm_psb_dc_state_arg) -#define DRM_IOCTL_PSB_ADB \ - DRM_IOWR(DRM_PSB_ADB + DRM_COMMAND_BASE, uint32_t) -#define DRM_IOCTL_PSB_MODE_OPERATION \ - DRM_IOWR(DRM_PSB_MODE_OPERATION + DRM_COMMAND_BASE, \ - struct drm_psb_mode_operation_arg) -#define DRM_IOCTL_PSB_STOLEN_MEMORY \ - DRM_IOWR(DRM_PSB_STOLEN_MEMORY + DRM_COMMAND_BASE, \ - struct drm_psb_stolen_memory_arg) -#define DRM_IOCTL_PSB_REGISTER_RW \ - DRM_IOWR(DRM_PSB_REGISTER_RW + DRM_COMMAND_BASE, \ - struct drm_psb_register_rw_arg) -#define DRM_IOCTL_PSB_DPST \ - DRM_IOWR(DRM_PSB_DPST + DRM_COMMAND_BASE, \ - uint32_t) -#define DRM_IOCTL_PSB_GAMMA \ - DRM_IOWR(DRM_PSB_GAMMA + DRM_COMMAND_BASE, \ - struct drm_psb_dpst_lut_arg) -#define DRM_IOCTL_PSB_DPST_BL \ - DRM_IOWR(DRM_PSB_DPST_BL + DRM_COMMAND_BASE, \ - uint32_t) -#define DRM_IOCTL_PSB_GET_PIPE_FROM_CRTC_ID \ - DRM_IOWR(DRM_PSB_GET_PIPE_FROM_CRTC_ID + DRM_COMMAND_BASE, \ - struct drm_psb_get_pipe_from_crtc_id_arg) -#define DRM_IOCTL_PSB_GEM_CREATE \ - DRM_IOWR(DRM_PSB_GEM_CREATE + DRM_COMMAND_BASE, \ - struct drm_psb_gem_create) -#define DRM_IOCTL_PSB_2D_OP \ - DRM_IOW(DRM_PSB_2D_OP + DRM_COMMAND_BASE, \ - struct drm_psb_2d_op) -#define DRM_IOCTL_PSB_GEM_MMAP \ - DRM_IOWR(DRM_PSB_GEM_MMAP + DRM_COMMAND_BASE, \ - struct drm_psb_gem_mmap) - -static int psb_sizes_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -static int psb_dc_state_ioctl(struct drm_device *dev, void * data, - struct drm_file *file_priv); -static int psb_adb_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -static int psb_mode_operation_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -static int psb_stolen_memory_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -static int psb_register_rw_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -static int psb_dpst_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -static int psb_gamma_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -static int psb_dpst_bl_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); - -#define PSB_IOCTL_DEF(ioctl, func, flags) \ - [DRM_IOCTL_NR(ioctl) - DRM_COMMAND_BASE] = {ioctl, flags, func} - -static struct drm_ioctl_desc psb_ioctls[] = { - PSB_IOCTL_DEF(DRM_IOCTL_PSB_SIZES, psb_sizes_ioctl, DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_DC_STATE, psb_dc_state_ioctl, DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_ADB, psb_adb_ioctl, DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_MODE_OPERATION, psb_mode_operation_ioctl, - DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_STOLEN_MEMORY, psb_stolen_memory_ioctl, - DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_REGISTER_RW, psb_register_rw_ioctl, - DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_DPST, psb_dpst_ioctl, DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_GAMMA, psb_gamma_ioctl, DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_DPST_BL, psb_dpst_bl_ioctl, DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_GET_PIPE_FROM_CRTC_ID, - psb_intel_get_pipe_from_crtc_id, 0), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_GEM_CREATE, psb_gem_create_ioctl, - DRM_UNLOCKED | DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_2D_OP, psb_accel_ioctl, - DRM_UNLOCKED| DRM_AUTH), - PSB_IOCTL_DEF(DRM_IOCTL_PSB_GEM_MMAP, psb_gem_mmap_ioctl, - DRM_UNLOCKED | DRM_AUTH), -}; - -static void psb_lastclose(struct drm_device *dev) -{ - return; -} - -static void psb_do_takedown(struct drm_device *dev) -{ -} - -static int psb_do_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_gtt *pg = &dev_priv->gtt; - - uint32_t stolen_gtt; - - int ret = -ENOMEM; - - if (pg->mmu_gatt_start & 0x0FFFFFFF) { - dev_err(dev->dev, "Gatt must be 256M aligned. This is a bug.\n"); - ret = -EINVAL; - goto out_err; - } - - - stolen_gtt = (pg->stolen_size >> PAGE_SHIFT) * 4; - stolen_gtt = (stolen_gtt + PAGE_SIZE - 1) >> PAGE_SHIFT; - stolen_gtt = - (stolen_gtt < pg->gtt_pages) ? stolen_gtt : pg->gtt_pages; - - dev_priv->gatt_free_offset = pg->mmu_gatt_start + - (stolen_gtt << PAGE_SHIFT) * 1024; - - if (1 || drm_debug) { - uint32_t core_id = PSB_RSGX32(PSB_CR_CORE_ID); - uint32_t core_rev = PSB_RSGX32(PSB_CR_CORE_REVISION); - DRM_INFO("SGX core id = 0x%08x\n", core_id); - DRM_INFO("SGX core rev major = 0x%02x, minor = 0x%02x\n", - (core_rev & _PSB_CC_REVISION_MAJOR_MASK) >> - _PSB_CC_REVISION_MAJOR_SHIFT, - (core_rev & _PSB_CC_REVISION_MINOR_MASK) >> - _PSB_CC_REVISION_MINOR_SHIFT); - DRM_INFO - ("SGX core rev maintenance = 0x%02x, designer = 0x%02x\n", - (core_rev & _PSB_CC_REVISION_MAINTENANCE_MASK) >> - _PSB_CC_REVISION_MAINTENANCE_SHIFT, - (core_rev & _PSB_CC_REVISION_DESIGNER_MASK) >> - _PSB_CC_REVISION_DESIGNER_SHIFT); - } - - - spin_lock_init(&dev_priv->irqmask_lock); - spin_lock_init(&dev_priv->lock_2d); - - PSB_WSGX32(0x00000000, PSB_CR_BIF_BANK0); - PSB_WSGX32(0x00000000, PSB_CR_BIF_BANK1); - PSB_RSGX32(PSB_CR_BIF_BANK1); - PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_MMU_ER_MASK, - PSB_CR_BIF_CTRL); - psb_spank(dev_priv); - - /* mmu_gatt ?? */ - PSB_WSGX32(pg->gatt_start, PSB_CR_BIF_TWOD_REQ_BASE); - return 0; -out_err: - psb_do_takedown(dev); - return ret; -} - -static int psb_driver_unload(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - /* Kill vblank etc here */ - - gma_backlight_exit(dev); - - if (drm_psb_no_fb == 0) - psb_modeset_cleanup(dev); - - if (dev_priv) { - psb_lid_timer_takedown(dev_priv); - gma_intel_opregion_exit(dev); - - if (dev_priv->ops->chip_teardown) - dev_priv->ops->chip_teardown(dev); - psb_do_takedown(dev); - - - if (dev_priv->pf_pd) { - psb_mmu_free_pagedir(dev_priv->pf_pd); - dev_priv->pf_pd = NULL; - } - if (dev_priv->mmu) { - struct psb_gtt *pg = &dev_priv->gtt; - - down_read(&pg->sem); - psb_mmu_remove_pfn_sequence( - psb_mmu_get_default_pd - (dev_priv->mmu), - pg->mmu_gatt_start, - dev_priv->vram_stolen_size >> PAGE_SHIFT); - up_read(&pg->sem); - psb_mmu_driver_takedown(dev_priv->mmu); - dev_priv->mmu = NULL; - } - psb_gtt_takedown(dev); - if (dev_priv->scratch_page) { - __free_page(dev_priv->scratch_page); - dev_priv->scratch_page = NULL; - } - if (dev_priv->vdc_reg) { - iounmap(dev_priv->vdc_reg); - dev_priv->vdc_reg = NULL; - } - if (dev_priv->sgx_reg) { - iounmap(dev_priv->sgx_reg); - dev_priv->sgx_reg = NULL; - } - - kfree(dev_priv); - dev->dev_private = NULL; - - /*destroy VBT data*/ - psb_intel_destroy_bios(dev); - } - - gma_power_uninit(dev); - - return 0; -} - - -static int psb_driver_load(struct drm_device *dev, unsigned long chipset) -{ - struct drm_psb_private *dev_priv; - unsigned long resource_start; - struct psb_gtt *pg; - unsigned long irqflags; - int ret = -ENOMEM; - uint32_t tt_pages; - struct drm_connector *connector; - struct psb_intel_output *psb_intel_output; - - dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL); - if (dev_priv == NULL) - return -ENOMEM; - - dev_priv->ops = (struct psb_ops *)chipset; - dev_priv->dev = dev; - dev->dev_private = (void *) dev_priv; - - if (!IS_PSB(dev)) { - if (pci_enable_msi(dev->pdev)) - dev_warn(dev->dev, "Enabling MSI failed!\n"); - } - - dev_priv->num_pipe = dev_priv->ops->pipes; - - resource_start = pci_resource_start(dev->pdev, PSB_MMIO_RESOURCE); - - dev_priv->vdc_reg = - ioremap(resource_start + PSB_VDC_OFFSET, PSB_VDC_SIZE); - if (!dev_priv->vdc_reg) - goto out_err; - - dev_priv->sgx_reg = ioremap(resource_start + dev_priv->ops->sgx_offset, - PSB_SGX_SIZE); - if (!dev_priv->sgx_reg) - goto out_err; - - ret = dev_priv->ops->chip_setup(dev); - if (ret) - goto out_err; - - /* Init OSPM support */ - gma_power_init(dev); - - ret = -ENOMEM; - - dev_priv->scratch_page = alloc_page(GFP_DMA32 | __GFP_ZERO); - if (!dev_priv->scratch_page) - goto out_err; - - set_pages_uc(dev_priv->scratch_page, 1); - - ret = psb_gtt_init(dev, 0); - if (ret) - goto out_err; - - dev_priv->mmu = psb_mmu_driver_init((void *)0, - drm_psb_trap_pagefaults, 0, - dev_priv); - if (!dev_priv->mmu) - goto out_err; - - pg = &dev_priv->gtt; - - tt_pages = (pg->gatt_pages < PSB_TT_PRIV0_PLIMIT) ? - (pg->gatt_pages) : PSB_TT_PRIV0_PLIMIT; - - - dev_priv->pf_pd = psb_mmu_alloc_pd(dev_priv->mmu, 1, 0); - if (!dev_priv->pf_pd) - goto out_err; - - psb_mmu_set_pd_context(psb_mmu_get_default_pd(dev_priv->mmu), 0); - psb_mmu_set_pd_context(dev_priv->pf_pd, 1); - - ret = psb_do_init(dev); - if (ret) - return ret; - - PSB_WSGX32(0x20000000, PSB_CR_PDS_EXEC_BASE); - PSB_WSGX32(0x30000000, PSB_CR_BIF_3D_REQ_BASE); - -/* igd_opregion_init(&dev_priv->opregion_dev); */ - acpi_video_register(); - if (dev_priv->lid_state) - psb_lid_timer_init(dev_priv); - - ret = drm_vblank_init(dev, dev_priv->num_pipe); - if (ret) - goto out_err; - - /* - * Install interrupt handlers prior to powering off SGX or else we will - * crash. - */ - dev_priv->vdc_irq_mask = 0; - dev_priv->pipestat[0] = 0; - dev_priv->pipestat[1] = 0; - dev_priv->pipestat[2] = 0; - spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); - PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM); - PSB_WVDC32(0x00000000, PSB_INT_ENABLE_R); - PSB_WVDC32(0xFFFFFFFF, PSB_INT_MASK_R); - spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); - if (IS_PSB(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) - drm_irq_install(dev); - - dev->vblank_disable_allowed = 1; - - dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - - dev->driver->get_vblank_counter = psb_get_vblank_counter; - -#if defined(CONFIG_DRM_PSB_MFLD) - /* FIXME: this is not the right place for this stuff ! */ - mdfld_output_setup(dev); -#endif - if (drm_psb_no_fb == 0) { - psb_modeset_init(dev); - psb_fbdev_init(dev); - drm_kms_helper_poll_init(dev); - } - - /* Only add backlight support if we have LVDS output */ - list_for_each_entry(connector, &dev->mode_config.connector_list, - head) { - psb_intel_output = to_psb_intel_output(connector); - - switch (psb_intel_output->type) { - case INTEL_OUTPUT_LVDS: - case INTEL_OUTPUT_MIPI: - ret = gma_backlight_init(dev); - break; - } - } - - if (ret) - return ret; - - /* Enable runtime pm at last */ - pm_runtime_set_active(&dev->pdev->dev); - return 0; -out_err: - psb_driver_unload(dev); - return ret; -} - -int psb_driver_device_is_agp(struct drm_device *dev) -{ - return 0; -} - - -static int psb_sizes_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_psb_private *dev_priv = psb_priv(dev); - struct drm_psb_sizes_arg *arg = data; - - *arg = dev_priv->sizes; - return 0; -} - -static int psb_dc_state_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - uint32_t flags; - uint32_t obj_id; - struct drm_mode_object *obj; - struct drm_connector *connector; - struct drm_crtc *crtc; - struct drm_psb_dc_state_arg *arg = data; - - - /* Double check MRST case */ - if (IS_MRST(dev) || IS_MFLD(dev)) - return -EOPNOTSUPP; - - flags = arg->flags; - obj_id = arg->obj_id; - - if (flags & PSB_DC_CRTC_MASK) { - obj = drm_mode_object_find(dev, obj_id, - DRM_MODE_OBJECT_CRTC); - if (!obj) { - dev_dbg(dev->dev, "Invalid CRTC object.\n"); - return -EINVAL; - } - - crtc = obj_to_crtc(obj); - - mutex_lock(&dev->mode_config.mutex); - if (drm_helper_crtc_in_use(crtc)) { - if (flags & PSB_DC_CRTC_SAVE) - crtc->funcs->save(crtc); - else - crtc->funcs->restore(crtc); - } - mutex_unlock(&dev->mode_config.mutex); - - return 0; - } else if (flags & PSB_DC_OUTPUT_MASK) { - obj = drm_mode_object_find(dev, obj_id, - DRM_MODE_OBJECT_CONNECTOR); - if (!obj) { - dev_dbg(dev->dev, "Invalid connector id.\n"); - return -EINVAL; - } - - connector = obj_to_connector(obj); - if (flags & PSB_DC_OUTPUT_SAVE) - connector->funcs->save(connector); - else - connector->funcs->restore(connector); - - return 0; - } - return -EINVAL; -} - -static inline void get_brightness(struct backlight_device *bd) -{ -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - if (bd) { - bd->props.brightness = bd->ops->get_brightness(bd); - backlight_update_status(bd); - } -#endif -} - -static int psb_dpst_bl_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_psb_private *dev_priv = psb_priv(dev); - uint32_t *arg = data; - - dev_priv->blc_adj2 = *arg; - get_brightness(dev_priv->backlight_device); - return 0; -} - -static int psb_adb_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_psb_private *dev_priv = psb_priv(dev); - uint32_t *arg = data; - - dev_priv->blc_adj1 = *arg; - get_brightness(dev_priv->backlight_device); - return 0; -} - -/* return the current mode to the dpst module */ -static int psb_dpst_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_psb_private *dev_priv = psb_priv(dev); - uint32_t *arg = data; - uint32_t x; - uint32_t y; - uint32_t reg; - - if (!gma_power_begin(dev, 0)) - return -EIO; - - reg = PSB_RVDC32(PIPEASRC); - - gma_power_end(dev); - - /* horizontal is the left 16 bits */ - x = reg >> 16; - /* vertical is the right 16 bits */ - y = reg & 0x0000ffff; - - /* the values are the image size minus one */ - x++; - y++; - - *arg = (x << 16) | y; - - return 0; -} -static int psb_gamma_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_psb_dpst_lut_arg *lut_arg = data; - struct drm_mode_object *obj; - struct drm_crtc *crtc; - struct drm_connector *connector; - struct psb_intel_crtc *psb_intel_crtc; - int i = 0; - int32_t obj_id; - - obj_id = lut_arg->output_id; - obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_CONNECTOR); - if (!obj) { - dev_dbg(dev->dev, "Invalid Connector object.\n"); - return -EINVAL; - } - - connector = obj_to_connector(obj); - crtc = connector->encoder->crtc; - psb_intel_crtc = to_psb_intel_crtc(crtc); - - for (i = 0; i < 256; i++) - psb_intel_crtc->lut_adj[i] = lut_arg->lut[i]; - - psb_intel_crtc_load_lut(crtc); - - return 0; -} - -static int psb_mode_operation_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - uint32_t obj_id; - uint16_t op; - struct drm_mode_modeinfo *umode; - struct drm_display_mode *mode = NULL; - struct drm_psb_mode_operation_arg *arg; - struct drm_mode_object *obj; - struct drm_connector *connector; - struct drm_framebuffer *drm_fb; - struct psb_framebuffer *psb_fb; - struct drm_connector_helper_funcs *connector_funcs; - int ret = 0; - int resp = MODE_OK; - struct drm_psb_private *dev_priv = psb_priv(dev); - - arg = (struct drm_psb_mode_operation_arg *)data; - obj_id = arg->obj_id; - op = arg->operation; - - switch (op) { - case PSB_MODE_OPERATION_SET_DC_BASE: - obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_FB); - if (!obj) { - dev_dbg(dev->dev, "Invalid FB id %d\n", obj_id); - return -EINVAL; - } - - drm_fb = obj_to_fb(obj); - psb_fb = to_psb_fb(drm_fb); - - if (gma_power_begin(dev, 0)) { - REG_WRITE(DSPASURF, psb_fb->gtt->offset); - REG_READ(DSPASURF); - gma_power_end(dev); - } else { - dev_priv->saveDSPASURF = psb_fb->gtt->offset; - } - - return 0; - case PSB_MODE_OPERATION_MODE_VALID: - umode = &arg->mode; - - mutex_lock(&dev->mode_config.mutex); - - obj = drm_mode_object_find(dev, obj_id, - DRM_MODE_OBJECT_CONNECTOR); - if (!obj) { - ret = -EINVAL; - goto mode_op_out; - } - - connector = obj_to_connector(obj); - - mode = drm_mode_create(dev); - if (!mode) { - ret = -ENOMEM; - goto mode_op_out; - } - - /* drm_crtc_convert_umode(mode, umode); */ - { - mode->clock = umode->clock; - mode->hdisplay = umode->hdisplay; - mode->hsync_start = umode->hsync_start; - mode->hsync_end = umode->hsync_end; - mode->htotal = umode->htotal; - mode->hskew = umode->hskew; - mode->vdisplay = umode->vdisplay; - mode->vsync_start = umode->vsync_start; - mode->vsync_end = umode->vsync_end; - mode->vtotal = umode->vtotal; - mode->vscan = umode->vscan; - mode->vrefresh = umode->vrefresh; - mode->flags = umode->flags; - mode->type = umode->type; - strncpy(mode->name, umode->name, DRM_DISPLAY_MODE_LEN); - mode->name[DRM_DISPLAY_MODE_LEN-1] = 0; - } - - connector_funcs = (struct drm_connector_helper_funcs *) - connector->helper_private; - - if (connector_funcs->mode_valid) { - resp = connector_funcs->mode_valid(connector, mode); - arg->data = (void *)resp; - } - - /*do some clean up work*/ - if (mode) - drm_mode_destroy(dev, mode); -mode_op_out: - mutex_unlock(&dev->mode_config.mutex); - return ret; - - default: - dev_dbg(dev->dev, "Unsupported psb mode operation\n"); - return -EOPNOTSUPP; - } - - return 0; -} - -static int psb_stolen_memory_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_psb_private *dev_priv = psb_priv(dev); - struct drm_psb_stolen_memory_arg *arg = data; - - arg->base = dev_priv->stolen_base; - arg->size = dev_priv->vram_stolen_size; - - return 0; -} - -/* FIXME: needs Medfield changes */ -static int psb_register_rw_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_psb_private *dev_priv = psb_priv(dev); - struct drm_psb_register_rw_arg *arg = data; - bool usage = arg->b_force_hw_on ? true : false; - - if (arg->display_write_mask != 0) { - if (gma_power_begin(dev, usage)) { - if (arg->display_write_mask & REGRWBITS_PFIT_CONTROLS) - PSB_WVDC32(arg->display.pfit_controls, - PFIT_CONTROL); - if (arg->display_write_mask & - REGRWBITS_PFIT_AUTOSCALE_RATIOS) - PSB_WVDC32(arg->display.pfit_autoscale_ratios, - PFIT_AUTO_RATIOS); - if (arg->display_write_mask & - REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS) - PSB_WVDC32( - arg->display.pfit_programmed_scale_ratios, - PFIT_PGM_RATIOS); - if (arg->display_write_mask & REGRWBITS_PIPEASRC) - PSB_WVDC32(arg->display.pipeasrc, - PIPEASRC); - if (arg->display_write_mask & REGRWBITS_PIPEBSRC) - PSB_WVDC32(arg->display.pipebsrc, - PIPEBSRC); - if (arg->display_write_mask & REGRWBITS_VTOTAL_A) - PSB_WVDC32(arg->display.vtotal_a, - VTOTAL_A); - if (arg->display_write_mask & REGRWBITS_VTOTAL_B) - PSB_WVDC32(arg->display.vtotal_b, - VTOTAL_B); - gma_power_end(dev); - } else { - if (arg->display_write_mask & REGRWBITS_PFIT_CONTROLS) - dev_priv->savePFIT_CONTROL = - arg->display.pfit_controls; - if (arg->display_write_mask & - REGRWBITS_PFIT_AUTOSCALE_RATIOS) - dev_priv->savePFIT_AUTO_RATIOS = - arg->display.pfit_autoscale_ratios; - if (arg->display_write_mask & - REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS) - dev_priv->savePFIT_PGM_RATIOS = - arg->display.pfit_programmed_scale_ratios; - if (arg->display_write_mask & REGRWBITS_PIPEASRC) - dev_priv->savePIPEASRC = arg->display.pipeasrc; - if (arg->display_write_mask & REGRWBITS_PIPEBSRC) - dev_priv->savePIPEBSRC = arg->display.pipebsrc; - if (arg->display_write_mask & REGRWBITS_VTOTAL_A) - dev_priv->saveVTOTAL_A = arg->display.vtotal_a; - if (arg->display_write_mask & REGRWBITS_VTOTAL_B) - dev_priv->saveVTOTAL_B = arg->display.vtotal_b; - } - } - - if (arg->display_read_mask != 0) { - if (gma_power_begin(dev, usage)) { - if (arg->display_read_mask & - REGRWBITS_PFIT_CONTROLS) - arg->display.pfit_controls = - PSB_RVDC32(PFIT_CONTROL); - if (arg->display_read_mask & - REGRWBITS_PFIT_AUTOSCALE_RATIOS) - arg->display.pfit_autoscale_ratios = - PSB_RVDC32(PFIT_AUTO_RATIOS); - if (arg->display_read_mask & - REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS) - arg->display.pfit_programmed_scale_ratios = - PSB_RVDC32(PFIT_PGM_RATIOS); - if (arg->display_read_mask & REGRWBITS_PIPEASRC) - arg->display.pipeasrc = PSB_RVDC32(PIPEASRC); - if (arg->display_read_mask & REGRWBITS_PIPEBSRC) - arg->display.pipebsrc = PSB_RVDC32(PIPEBSRC); - if (arg->display_read_mask & REGRWBITS_VTOTAL_A) - arg->display.vtotal_a = PSB_RVDC32(VTOTAL_A); - if (arg->display_read_mask & REGRWBITS_VTOTAL_B) - arg->display.vtotal_b = PSB_RVDC32(VTOTAL_B); - gma_power_end(dev); - } else { - if (arg->display_read_mask & - REGRWBITS_PFIT_CONTROLS) - arg->display.pfit_controls = - dev_priv->savePFIT_CONTROL; - if (arg->display_read_mask & - REGRWBITS_PFIT_AUTOSCALE_RATIOS) - arg->display.pfit_autoscale_ratios = - dev_priv->savePFIT_AUTO_RATIOS; - if (arg->display_read_mask & - REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS) - arg->display.pfit_programmed_scale_ratios = - dev_priv->savePFIT_PGM_RATIOS; - if (arg->display_read_mask & REGRWBITS_PIPEASRC) - arg->display.pipeasrc = dev_priv->savePIPEASRC; - if (arg->display_read_mask & REGRWBITS_PIPEBSRC) - arg->display.pipebsrc = dev_priv->savePIPEBSRC; - if (arg->display_read_mask & REGRWBITS_VTOTAL_A) - arg->display.vtotal_a = dev_priv->saveVTOTAL_A; - if (arg->display_read_mask & REGRWBITS_VTOTAL_B) - arg->display.vtotal_b = dev_priv->saveVTOTAL_B; - } - } - - if (arg->overlay_write_mask != 0) { - if (gma_power_begin(dev, usage)) { - if (arg->overlay_write_mask & OV_REGRWBITS_OGAM_ALL) { - PSB_WVDC32(arg->overlay.OGAMC5, OV_OGAMC5); - PSB_WVDC32(arg->overlay.OGAMC4, OV_OGAMC4); - PSB_WVDC32(arg->overlay.OGAMC3, OV_OGAMC3); - PSB_WVDC32(arg->overlay.OGAMC2, OV_OGAMC2); - PSB_WVDC32(arg->overlay.OGAMC1, OV_OGAMC1); - PSB_WVDC32(arg->overlay.OGAMC0, OV_OGAMC0); - } - if (arg->overlay_write_mask & OVC_REGRWBITS_OGAM_ALL) { - PSB_WVDC32(arg->overlay.OGAMC5, OVC_OGAMC5); - PSB_WVDC32(arg->overlay.OGAMC4, OVC_OGAMC4); - PSB_WVDC32(arg->overlay.OGAMC3, OVC_OGAMC3); - PSB_WVDC32(arg->overlay.OGAMC2, OVC_OGAMC2); - PSB_WVDC32(arg->overlay.OGAMC1, OVC_OGAMC1); - PSB_WVDC32(arg->overlay.OGAMC0, OVC_OGAMC0); - } - - if (arg->overlay_write_mask & OV_REGRWBITS_OVADD) { - PSB_WVDC32(arg->overlay.OVADD, OV_OVADD); - - if (arg->overlay.b_wait_vblank) { - /* Wait for 20ms.*/ - unsigned long vblank_timeout = jiffies - + HZ/50; - uint32_t temp; - while (time_before_eq(jiffies, - vblank_timeout)) { - temp = PSB_RVDC32(OV_DOVASTA); - if ((temp & (0x1 << 31)) != 0) - break; - cpu_relax(); - } - } - } - if (arg->overlay_write_mask & OVC_REGRWBITS_OVADD) { - PSB_WVDC32(arg->overlay.OVADD, OVC_OVADD); - if (arg->overlay.b_wait_vblank) { - /* Wait for 20ms.*/ - unsigned long vblank_timeout = - jiffies + HZ/50; - uint32_t temp; - while (time_before_eq(jiffies, - vblank_timeout)) { - temp = PSB_RVDC32(OVC_DOVCSTA); - if ((temp & (0x1 << 31)) != 0) - break; - cpu_relax(); - } - } - } - gma_power_end(dev); - } else { - if (arg->overlay_write_mask & OV_REGRWBITS_OGAM_ALL) { - dev_priv->saveOV_OGAMC5 = arg->overlay.OGAMC5; - dev_priv->saveOV_OGAMC4 = arg->overlay.OGAMC4; - dev_priv->saveOV_OGAMC3 = arg->overlay.OGAMC3; - dev_priv->saveOV_OGAMC2 = arg->overlay.OGAMC2; - dev_priv->saveOV_OGAMC1 = arg->overlay.OGAMC1; - dev_priv->saveOV_OGAMC0 = arg->overlay.OGAMC0; - } - if (arg->overlay_write_mask & OVC_REGRWBITS_OGAM_ALL) { - dev_priv->saveOVC_OGAMC5 = arg->overlay.OGAMC5; - dev_priv->saveOVC_OGAMC4 = arg->overlay.OGAMC4; - dev_priv->saveOVC_OGAMC3 = arg->overlay.OGAMC3; - dev_priv->saveOVC_OGAMC2 = arg->overlay.OGAMC2; - dev_priv->saveOVC_OGAMC1 = arg->overlay.OGAMC1; - dev_priv->saveOVC_OGAMC0 = arg->overlay.OGAMC0; - } - if (arg->overlay_write_mask & OV_REGRWBITS_OVADD) - dev_priv->saveOV_OVADD = arg->overlay.OVADD; - if (arg->overlay_write_mask & OVC_REGRWBITS_OVADD) - dev_priv->saveOVC_OVADD = arg->overlay.OVADD; - } - } - - if (arg->overlay_read_mask != 0) { - if (gma_power_begin(dev, usage)) { - if (arg->overlay_read_mask & OV_REGRWBITS_OGAM_ALL) { - arg->overlay.OGAMC5 = PSB_RVDC32(OV_OGAMC5); - arg->overlay.OGAMC4 = PSB_RVDC32(OV_OGAMC4); - arg->overlay.OGAMC3 = PSB_RVDC32(OV_OGAMC3); - arg->overlay.OGAMC2 = PSB_RVDC32(OV_OGAMC2); - arg->overlay.OGAMC1 = PSB_RVDC32(OV_OGAMC1); - arg->overlay.OGAMC0 = PSB_RVDC32(OV_OGAMC0); - } - if (arg->overlay_read_mask & OVC_REGRWBITS_OGAM_ALL) { - arg->overlay.OGAMC5 = PSB_RVDC32(OVC_OGAMC5); - arg->overlay.OGAMC4 = PSB_RVDC32(OVC_OGAMC4); - arg->overlay.OGAMC3 = PSB_RVDC32(OVC_OGAMC3); - arg->overlay.OGAMC2 = PSB_RVDC32(OVC_OGAMC2); - arg->overlay.OGAMC1 = PSB_RVDC32(OVC_OGAMC1); - arg->overlay.OGAMC0 = PSB_RVDC32(OVC_OGAMC0); - } - if (arg->overlay_read_mask & OV_REGRWBITS_OVADD) - arg->overlay.OVADD = PSB_RVDC32(OV_OVADD); - if (arg->overlay_read_mask & OVC_REGRWBITS_OVADD) - arg->overlay.OVADD = PSB_RVDC32(OVC_OVADD); - gma_power_end(dev); - } else { - if (arg->overlay_read_mask & OV_REGRWBITS_OGAM_ALL) { - arg->overlay.OGAMC5 = dev_priv->saveOV_OGAMC5; - arg->overlay.OGAMC4 = dev_priv->saveOV_OGAMC4; - arg->overlay.OGAMC3 = dev_priv->saveOV_OGAMC3; - arg->overlay.OGAMC2 = dev_priv->saveOV_OGAMC2; - arg->overlay.OGAMC1 = dev_priv->saveOV_OGAMC1; - arg->overlay.OGAMC0 = dev_priv->saveOV_OGAMC0; - } - if (arg->overlay_read_mask & OVC_REGRWBITS_OGAM_ALL) { - arg->overlay.OGAMC5 = dev_priv->saveOVC_OGAMC5; - arg->overlay.OGAMC4 = dev_priv->saveOVC_OGAMC4; - arg->overlay.OGAMC3 = dev_priv->saveOVC_OGAMC3; - arg->overlay.OGAMC2 = dev_priv->saveOVC_OGAMC2; - arg->overlay.OGAMC1 = dev_priv->saveOVC_OGAMC1; - arg->overlay.OGAMC0 = dev_priv->saveOVC_OGAMC0; - } - if (arg->overlay_read_mask & OV_REGRWBITS_OVADD) - arg->overlay.OVADD = dev_priv->saveOV_OVADD; - if (arg->overlay_read_mask & OVC_REGRWBITS_OVADD) - arg->overlay.OVADD = dev_priv->saveOVC_OVADD; - } - } - - if (arg->sprite_enable_mask != 0) { - if (gma_power_begin(dev, usage)) { - PSB_WVDC32(0x1F3E, DSPARB); - PSB_WVDC32(arg->sprite.dspa_control - | PSB_RVDC32(DSPACNTR), DSPACNTR); - PSB_WVDC32(arg->sprite.dspa_key_value, DSPAKEYVAL); - PSB_WVDC32(arg->sprite.dspa_key_mask, DSPAKEYMASK); - PSB_WVDC32(PSB_RVDC32(DSPASURF), DSPASURF); - PSB_RVDC32(DSPASURF); - PSB_WVDC32(arg->sprite.dspc_control, DSPCCNTR); - PSB_WVDC32(arg->sprite.dspc_stride, DSPCSTRIDE); - PSB_WVDC32(arg->sprite.dspc_position, DSPCPOS); - PSB_WVDC32(arg->sprite.dspc_linear_offset, DSPCLINOFF); - PSB_WVDC32(arg->sprite.dspc_size, DSPCSIZE); - PSB_WVDC32(arg->sprite.dspc_surface, DSPCSURF); - PSB_RVDC32(DSPCSURF); - gma_power_end(dev); - } - } - - if (arg->sprite_disable_mask != 0) { - if (gma_power_begin(dev, usage)) { - PSB_WVDC32(0x3F3E, DSPARB); - PSB_WVDC32(0x0, DSPCCNTR); - PSB_WVDC32(arg->sprite.dspc_surface, DSPCSURF); - PSB_RVDC32(DSPCSURF); - gma_power_end(dev); - } - } - - if (arg->subpicture_enable_mask != 0) { - if (gma_power_begin(dev, usage)) { - uint32_t temp; - if (arg->subpicture_enable_mask & REGRWBITS_DSPACNTR) { - temp = PSB_RVDC32(DSPACNTR); - temp &= ~DISPPLANE_PIXFORMAT_MASK; - temp &= ~DISPPLANE_BOTTOM; - temp |= DISPPLANE_32BPP; - PSB_WVDC32(temp, DSPACNTR); - - temp = PSB_RVDC32(DSPABASE); - PSB_WVDC32(temp, DSPABASE); - PSB_RVDC32(DSPABASE); - temp = PSB_RVDC32(DSPASURF); - PSB_WVDC32(temp, DSPASURF); - PSB_RVDC32(DSPASURF); - } - if (arg->subpicture_enable_mask & REGRWBITS_DSPBCNTR) { - temp = PSB_RVDC32(DSPBCNTR); - temp &= ~DISPPLANE_PIXFORMAT_MASK; - temp &= ~DISPPLANE_BOTTOM; - temp |= DISPPLANE_32BPP; - PSB_WVDC32(temp, DSPBCNTR); - - temp = PSB_RVDC32(DSPBBASE); - PSB_WVDC32(temp, DSPBBASE); - PSB_RVDC32(DSPBBASE); - temp = PSB_RVDC32(DSPBSURF); - PSB_WVDC32(temp, DSPBSURF); - PSB_RVDC32(DSPBSURF); - } - if (arg->subpicture_enable_mask & REGRWBITS_DSPCCNTR) { - temp = PSB_RVDC32(DSPCCNTR); - temp &= ~DISPPLANE_PIXFORMAT_MASK; - temp &= ~DISPPLANE_BOTTOM; - temp |= DISPPLANE_32BPP; - PSB_WVDC32(temp, DSPCCNTR); - - temp = PSB_RVDC32(DSPCBASE); - PSB_WVDC32(temp, DSPCBASE); - PSB_RVDC32(DSPCBASE); - temp = PSB_RVDC32(DSPCSURF); - PSB_WVDC32(temp, DSPCSURF); - PSB_RVDC32(DSPCSURF); - } - gma_power_end(dev); - } - } - - if (arg->subpicture_disable_mask != 0) { - if (gma_power_begin(dev, usage)) { - uint32_t temp; - if (arg->subpicture_disable_mask & REGRWBITS_DSPACNTR) { - temp = PSB_RVDC32(DSPACNTR); - temp &= ~DISPPLANE_PIXFORMAT_MASK; - temp |= DISPPLANE_32BPP_NO_ALPHA; - PSB_WVDC32(temp, DSPACNTR); - - temp = PSB_RVDC32(DSPABASE); - PSB_WVDC32(temp, DSPABASE); - PSB_RVDC32(DSPABASE); - temp = PSB_RVDC32(DSPASURF); - PSB_WVDC32(temp, DSPASURF); - PSB_RVDC32(DSPASURF); - } - if (arg->subpicture_disable_mask & REGRWBITS_DSPBCNTR) { - temp = PSB_RVDC32(DSPBCNTR); - temp &= ~DISPPLANE_PIXFORMAT_MASK; - temp |= DISPPLANE_32BPP_NO_ALPHA; - PSB_WVDC32(temp, DSPBCNTR); - - temp = PSB_RVDC32(DSPBBASE); - PSB_WVDC32(temp, DSPBBASE); - PSB_RVDC32(DSPBBASE); - temp = PSB_RVDC32(DSPBSURF); - PSB_WVDC32(temp, DSPBSURF); - PSB_RVDC32(DSPBSURF); - } - if (arg->subpicture_disable_mask & REGRWBITS_DSPCCNTR) { - temp = PSB_RVDC32(DSPCCNTR); - temp &= ~DISPPLANE_PIXFORMAT_MASK; - temp |= DISPPLANE_32BPP_NO_ALPHA; - PSB_WVDC32(temp, DSPCCNTR); - - temp = PSB_RVDC32(DSPCBASE); - PSB_WVDC32(temp, DSPCBASE); - PSB_RVDC32(DSPCBASE); - temp = PSB_RVDC32(DSPCSURF); - PSB_WVDC32(temp, DSPCSURF); - PSB_RVDC32(DSPCSURF); - } - gma_power_end(dev); - } - } - - return 0; -} - -static int psb_driver_open(struct drm_device *dev, struct drm_file *priv) -{ - return 0; -} - -static void psb_driver_close(struct drm_device *dev, struct drm_file *priv) -{ -} - -static long psb_unlocked_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg) -{ - struct drm_file *file_priv = filp->private_data; - struct drm_device *dev = file_priv->minor->dev; - int ret; - - pm_runtime_forbid(dev->dev); - ret = drm_ioctl(filp, cmd, arg); - pm_runtime_allow(dev->dev); - return ret; - /* FIXME: do we need to wrap the other side of this */ -} - - -/* When a client dies: - * - Check for and clean up flipped page state - */ -void psb_driver_preclose(struct drm_device *dev, struct drm_file *priv) -{ -} - -static void psb_remove(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); - drm_put_dev(dev); -} - -static const struct dev_pm_ops psb_pm_ops = { - .suspend = gma_power_suspend, - .resume = gma_power_resume, - .freeze = gma_power_suspend, - .thaw = gma_power_resume, - .poweroff = gma_power_suspend, - .restore = gma_power_resume, - .runtime_suspend = psb_runtime_suspend, - .runtime_resume = psb_runtime_resume, - .runtime_idle = psb_runtime_idle, -}; - -static struct vm_operations_struct psb_gem_vm_ops = { - .fault = psb_gem_fault, - .open = drm_gem_vm_open, - .close = drm_gem_vm_close, -}; - -static const struct file_operations gma500_driver_fops = { - .owner = THIS_MODULE, - .open = drm_open, - .release = drm_release, - .unlocked_ioctl = psb_unlocked_ioctl, - .mmap = drm_gem_mmap, - .poll = drm_poll, - .fasync = drm_fasync, - .read = drm_read, -}; - -static struct drm_driver driver = { - .driver_features = DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | \ - DRIVER_IRQ_VBL | DRIVER_MODESET | DRIVER_GEM , - .load = psb_driver_load, - .unload = psb_driver_unload, - - .ioctls = psb_ioctls, - .num_ioctls = DRM_ARRAY_SIZE(psb_ioctls), - .device_is_agp = psb_driver_device_is_agp, - .irq_preinstall = psb_irq_preinstall, - .irq_postinstall = psb_irq_postinstall, - .irq_uninstall = psb_irq_uninstall, - .irq_handler = psb_irq_handler, - .enable_vblank = psb_enable_vblank, - .disable_vblank = psb_disable_vblank, - .get_vblank_counter = psb_get_vblank_counter, - .lastclose = psb_lastclose, - .open = psb_driver_open, - .preclose = psb_driver_preclose, - .postclose = psb_driver_close, - .reclaim_buffers = drm_core_reclaim_buffers, - - .gem_init_object = psb_gem_init_object, - .gem_free_object = psb_gem_free_object, - .gem_vm_ops = &psb_gem_vm_ops, - .dumb_create = psb_gem_dumb_create, - .dumb_map_offset = psb_gem_dumb_map_gtt, - .dumb_destroy = psb_gem_dumb_destroy, - .fops = &gma500_driver_fops, - .name = DRIVER_NAME, - .desc = DRIVER_DESC, - .date = PSB_DRM_DRIVER_DATE, - .major = PSB_DRM_DRIVER_MAJOR, - .minor = PSB_DRM_DRIVER_MINOR, - .patchlevel = PSB_DRM_DRIVER_PATCHLEVEL -}; - -static struct pci_driver psb_pci_driver = { - .name = DRIVER_NAME, - .id_table = pciidlist, - .probe = psb_probe, - .remove = psb_remove, - .driver.pm = &psb_pm_ops, -}; - -static int psb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - return drm_get_pci_dev(pdev, ent, &driver); -} - -static int __init psb_init(void) -{ - return drm_pci_init(&driver, &psb_pci_driver); -} - -static void __exit psb_exit(void) -{ - drm_pci_exit(&driver, &psb_pci_driver); -} - -late_initcall(psb_init); -module_exit(psb_exit); - -MODULE_AUTHOR("Alan Cox and others"); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/gma500/psb_drv.h b/drivers/staging/gma500/psb_drv.h deleted file mode 100644 index 11d963a055be..000000000000 --- a/drivers/staging/gma500/psb_drv.h +++ /dev/null @@ -1,952 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007-2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - **************************************************************************/ - -#ifndef _PSB_DRV_H_ -#define _PSB_DRV_H_ - -#include - -#include -#include "drm_global.h" -#include "gem_glue.h" -#include "psb_drm.h" -#include "psb_reg.h" -#include "psb_intel_drv.h" -#include "gtt.h" -#include "power.h" -#include "mrst.h" -#include "medfield.h" - -/* Append new drm mode definition here, align with libdrm definition */ -#define DRM_MODE_SCALE_NO_SCALE 2 - -enum { - CHIP_PSB_8108 = 0, /* Poulsbo */ - CHIP_PSB_8109 = 1, /* Poulsbo */ - CHIP_MRST_4100 = 2, /* Moorestown/Oaktrail */ - CHIP_MFLD_0130 = 3, /* Medfield */ -}; - -#define IS_PSB(dev) (((dev)->pci_device & 0xfffe) == 0x8108) -#define IS_MRST(dev) (((dev)->pci_device & 0xfffc) == 0x4100) -#define IS_MFLD(dev) (((dev)->pci_device & 0xfff8) == 0x0130) - -/* - * Driver definitions - */ - -#define DRIVER_NAME "gma500" -#define DRIVER_DESC "DRM driver for the Intel GMA500" - -#define PSB_DRM_DRIVER_DATE "2011-06-06" -#define PSB_DRM_DRIVER_MAJOR 1 -#define PSB_DRM_DRIVER_MINOR 0 -#define PSB_DRM_DRIVER_PATCHLEVEL 0 - -/* - * Hardware offsets - */ -#define PSB_VDC_OFFSET 0x00000000 -#define PSB_VDC_SIZE 0x000080000 -#define MRST_MMIO_SIZE 0x0000C0000 -#define MDFLD_MMIO_SIZE 0x000100000 -#define PSB_SGX_SIZE 0x8000 -#define PSB_SGX_OFFSET 0x00040000 -#define MRST_SGX_OFFSET 0x00080000 -/* - * PCI resource identifiers - */ -#define PSB_MMIO_RESOURCE 0 -#define PSB_GATT_RESOURCE 2 -#define PSB_GTT_RESOURCE 3 -/* - * PCI configuration - */ -#define PSB_GMCH_CTRL 0x52 -#define PSB_BSM 0x5C -#define _PSB_GMCH_ENABLED 0x4 -#define PSB_PGETBL_CTL 0x2020 -#define _PSB_PGETBL_ENABLED 0x00000001 -#define PSB_SGX_2D_SLAVE_PORT 0x4000 - -/* To get rid of */ -#define PSB_TT_PRIV0_LIMIT (256*1024*1024) -#define PSB_TT_PRIV0_PLIMIT (PSB_TT_PRIV0_LIMIT >> PAGE_SHIFT) - -/* - * SGX side MMU definitions (these can probably go) - */ - -/* - * Flags for external memory type field. - */ -#define PSB_MMU_CACHED_MEMORY 0x0001 /* Bind to MMU only */ -#define PSB_MMU_RO_MEMORY 0x0002 /* MMU RO memory */ -#define PSB_MMU_WO_MEMORY 0x0004 /* MMU WO memory */ -/* - * PTE's and PDE's - */ -#define PSB_PDE_MASK 0x003FFFFF -#define PSB_PDE_SHIFT 22 -#define PSB_PTE_SHIFT 12 -/* - * Cache control - */ -#define PSB_PTE_VALID 0x0001 /* PTE / PDE valid */ -#define PSB_PTE_WO 0x0002 /* Write only */ -#define PSB_PTE_RO 0x0004 /* Read only */ -#define PSB_PTE_CACHED 0x0008 /* CPU cache coherent */ - -/* - * VDC registers and bits - */ -#define PSB_MSVDX_CLOCKGATING 0x2064 -#define PSB_TOPAZ_CLOCKGATING 0x2068 -#define PSB_HWSTAM 0x2098 -#define PSB_INSTPM 0x20C0 -#define PSB_INT_IDENTITY_R 0x20A4 -#define _MDFLD_PIPEC_EVENT_FLAG (1<<2) -#define _MDFLD_PIPEC_VBLANK_FLAG (1<<3) -#define _PSB_DPST_PIPEB_FLAG (1<<4) -#define _MDFLD_PIPEB_EVENT_FLAG (1<<4) -#define _PSB_VSYNC_PIPEB_FLAG (1<<5) -#define _PSB_DPST_PIPEA_FLAG (1<<6) -#define _PSB_PIPEA_EVENT_FLAG (1<<6) -#define _PSB_VSYNC_PIPEA_FLAG (1<<7) -#define _MDFLD_MIPIA_FLAG (1<<16) -#define _MDFLD_MIPIC_FLAG (1<<17) -#define _PSB_IRQ_SGX_FLAG (1<<18) -#define _PSB_IRQ_MSVDX_FLAG (1<<19) -#define _LNC_IRQ_TOPAZ_FLAG (1<<20) - -#define _PSB_PIPE_EVENT_FLAG (_PSB_VSYNC_PIPEA_FLAG | \ - _PSB_VSYNC_PIPEB_FLAG) - -/* This flag includes all the display IRQ bits excepts the vblank irqs. */ -#define _MDFLD_DISP_ALL_IRQ_FLAG (_MDFLD_PIPEC_EVENT_FLAG | \ - _MDFLD_PIPEB_EVENT_FLAG | \ - _PSB_PIPEA_EVENT_FLAG | \ - _PSB_VSYNC_PIPEA_FLAG | \ - _MDFLD_MIPIA_FLAG | \ - _MDFLD_MIPIC_FLAG) -#define PSB_INT_IDENTITY_R 0x20A4 -#define PSB_INT_MASK_R 0x20A8 -#define PSB_INT_ENABLE_R 0x20A0 - -#define _PSB_MMU_ER_MASK 0x0001FF00 -#define _PSB_MMU_ER_HOST (1 << 16) -#define GPIOA 0x5010 -#define GPIOB 0x5014 -#define GPIOC 0x5018 -#define GPIOD 0x501c -#define GPIOE 0x5020 -#define GPIOF 0x5024 -#define GPIOG 0x5028 -#define GPIOH 0x502c -#define GPIO_CLOCK_DIR_MASK (1 << 0) -#define GPIO_CLOCK_DIR_IN (0 << 1) -#define GPIO_CLOCK_DIR_OUT (1 << 1) -#define GPIO_CLOCK_VAL_MASK (1 << 2) -#define GPIO_CLOCK_VAL_OUT (1 << 3) -#define GPIO_CLOCK_VAL_IN (1 << 4) -#define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) -#define GPIO_DATA_DIR_MASK (1 << 8) -#define GPIO_DATA_DIR_IN (0 << 9) -#define GPIO_DATA_DIR_OUT (1 << 9) -#define GPIO_DATA_VAL_MASK (1 << 10) -#define GPIO_DATA_VAL_OUT (1 << 11) -#define GPIO_DATA_VAL_IN (1 << 12) -#define GPIO_DATA_PULLUP_DISABLE (1 << 13) - -#define VCLK_DIVISOR_VGA0 0x6000 -#define VCLK_DIVISOR_VGA1 0x6004 -#define VCLK_POST_DIV 0x6010 - -#define PSB_COMM_2D (PSB_ENGINE_2D << 4) -#define PSB_COMM_3D (PSB_ENGINE_3D << 4) -#define PSB_COMM_TA (PSB_ENGINE_TA << 4) -#define PSB_COMM_HP (PSB_ENGINE_HP << 4) -#define PSB_COMM_USER_IRQ (1024 >> 2) -#define PSB_COMM_USER_IRQ_LOST (PSB_COMM_USER_IRQ + 1) -#define PSB_COMM_FW (2048 >> 2) - -#define PSB_UIRQ_VISTEST 1 -#define PSB_UIRQ_OOM_REPLY 2 -#define PSB_UIRQ_FIRE_TA_REPLY 3 -#define PSB_UIRQ_FIRE_RASTER_REPLY 4 - -#define PSB_2D_SIZE (256*1024*1024) -#define PSB_MAX_RELOC_PAGES 1024 - -#define PSB_LOW_REG_OFFS 0x0204 -#define PSB_HIGH_REG_OFFS 0x0600 - -#define PSB_NUM_VBLANKS 2 - - -#define PSB_2D_SIZE (256*1024*1024) -#define PSB_MAX_RELOC_PAGES 1024 - -#define PSB_LOW_REG_OFFS 0x0204 -#define PSB_HIGH_REG_OFFS 0x0600 - -#define PSB_NUM_VBLANKS 2 -#define PSB_WATCHDOG_DELAY (DRM_HZ * 2) -#define PSB_LID_DELAY (DRM_HZ / 10) - -#define MDFLD_PNW_B0 0x04 -#define MDFLD_PNW_C0 0x08 - -#define MDFLD_DSR_2D_3D_0 (1 << 0) -#define MDFLD_DSR_2D_3D_2 (1 << 1) -#define MDFLD_DSR_CURSOR_0 (1 << 2) -#define MDFLD_DSR_CURSOR_2 (1 << 3) -#define MDFLD_DSR_OVERLAY_0 (1 << 4) -#define MDFLD_DSR_OVERLAY_2 (1 << 5) -#define MDFLD_DSR_MIPI_CONTROL (1 << 6) -#define MDFLD_DSR_DAMAGE_MASK_0 ((1 << 0) | (1 << 2) | (1 << 4)) -#define MDFLD_DSR_DAMAGE_MASK_2 ((1 << 1) | (1 << 3) | (1 << 5)) -#define MDFLD_DSR_2D_3D (MDFLD_DSR_2D_3D_0 | MDFLD_DSR_2D_3D_2) - -#define MDFLD_DSR_RR 45 -#define MDFLD_DPU_ENABLE (1 << 31) -#define MDFLD_DSR_FULLSCREEN (1 << 30) -#define MDFLD_DSR_DELAY (DRM_HZ / MDFLD_DSR_RR) - -#define PSB_PWR_STATE_ON 1 -#define PSB_PWR_STATE_OFF 2 - -#define PSB_PMPOLICY_NOPM 0 -#define PSB_PMPOLICY_CLOCKGATING 1 -#define PSB_PMPOLICY_POWERDOWN 2 - -#define PSB_PMSTATE_POWERUP 0 -#define PSB_PMSTATE_CLOCKGATED 1 -#define PSB_PMSTATE_POWERDOWN 2 -#define PSB_PCIx_MSI_ADDR_LOC 0x94 -#define PSB_PCIx_MSI_DATA_LOC 0x98 - -/* Medfield crystal settings */ -#define KSEL_CRYSTAL_19 1 -#define KSEL_BYPASS_19 5 -#define KSEL_BYPASS_25 6 -#define KSEL_BYPASS_83_100 7 - -struct opregion_header; -struct opregion_acpi; -struct opregion_swsci; -struct opregion_asle; - -struct psb_intel_opregion { - struct opregion_header *header; - struct opregion_acpi *acpi; - struct opregion_swsci *swsci; - struct opregion_asle *asle; - int enabled; -}; - -struct psb_ops; - -struct drm_psb_private { - struct drm_device *dev; - const struct psb_ops *ops; - - struct psb_gtt gtt; - - /* GTT Memory manager */ - struct psb_gtt_mm *gtt_mm; - struct page *scratch_page; - u32 *gtt_map; - uint32_t stolen_base; - void *vram_addr; - unsigned long vram_stolen_size; - int gtt_initialized; - u16 gmch_ctrl; /* Saved GTT setup */ - u32 pge_ctl; - - struct mutex gtt_mutex; - struct resource *gtt_mem; /* Our PCI resource */ - - struct psb_mmu_driver *mmu; - struct psb_mmu_pd *pf_pd; - - /* - * Register base - */ - - uint8_t *sgx_reg; - uint8_t *vdc_reg; - uint32_t gatt_free_offset; - - /* - * Fencing / irq. - */ - - uint32_t vdc_irq_mask; - uint32_t pipestat[PSB_NUM_PIPE]; - - spinlock_t irqmask_lock; - - /* - * Power - */ - - bool suspended; - bool display_power; - int display_count; - - /* - * Modesetting - */ - struct psb_intel_mode_device mode_dev; - - struct drm_crtc *plane_to_crtc_mapping[PSB_NUM_PIPE]; - struct drm_crtc *pipe_to_crtc_mapping[PSB_NUM_PIPE]; - uint32_t num_pipe; - - /* - * OSPM info (Power management base) (can go ?) - */ - uint32_t ospm_base; - - /* - * Sizes info - */ - - struct drm_psb_sizes_arg sizes; - - u32 fuse_reg_value; - u32 video_device_fuse; - - /* PCI revision ID for B0:D2:F0 */ - uint8_t platform_rev_id; - - /* - * LVDS info - */ - int backlight_duty_cycle; /* restore backlight to this value */ - bool panel_wants_dither; - struct drm_display_mode *panel_fixed_mode; - struct drm_display_mode *lfp_lvds_vbt_mode; - struct drm_display_mode *sdvo_lvds_vbt_mode; - - struct bdb_lvds_backlight *lvds_bl; /* LVDS backlight info from VBT */ - struct psb_intel_i2c_chan *lvds_i2c_bus; - - /* Feature bits from the VBIOS */ - unsigned int int_tv_support:1; - unsigned int lvds_dither:1; - unsigned int lvds_vbt:1; - unsigned int int_crt_support:1; - unsigned int lvds_use_ssc:1; - int lvds_ssc_freq; - bool is_lvds_on; - bool is_mipi_on; - u32 mipi_ctrl_display; - - unsigned int core_freq; - uint32_t iLVDS_enable; - - /* Runtime PM state */ - int rpm_enabled; - - /* MID specific */ - struct mrst_vbt vbt_data; - struct mrst_gct_data gct_data; - - /* MIPI Panel type etc */ - int panel_id; - bool dual_mipi; /* dual display - DPI & DBI */ - bool dpi_panel_on; /* The DPI panel power is on */ - bool dpi_panel_on2; /* The DPI panel power is on */ - bool dbi_panel_on; /* The DBI panel power is on */ - bool dbi_panel_on2; /* The DBI panel power is on */ - u32 dsr_fb_update; /* DSR FB update counter */ - - /* Moorestown HDMI state */ - struct mrst_hdmi_dev *hdmi_priv; - - /* Moorestown pipe config register value cache */ - uint32_t pipeconf; - uint32_t pipeconf1; - uint32_t pipeconf2; - - /* Moorestown plane control register value cache */ - uint32_t dspcntr; - uint32_t dspcntr1; - uint32_t dspcntr2; - - /* Moorestown MM backlight cache */ - uint8_t saveBKLTCNT; - uint8_t saveBKLTREQ; - uint8_t saveBKLTBRTL; - - /* - * Register state - */ - uint32_t saveDSPACNTR; - uint32_t saveDSPBCNTR; - uint32_t savePIPEACONF; - uint32_t savePIPEBCONF; - uint32_t savePIPEASRC; - uint32_t savePIPEBSRC; - uint32_t saveFPA0; - uint32_t saveFPA1; - uint32_t saveDPLL_A; - uint32_t saveDPLL_A_MD; - uint32_t saveHTOTAL_A; - uint32_t saveHBLANK_A; - uint32_t saveHSYNC_A; - uint32_t saveVTOTAL_A; - uint32_t saveVBLANK_A; - uint32_t saveVSYNC_A; - uint32_t saveDSPASTRIDE; - uint32_t saveDSPASIZE; - uint32_t saveDSPAPOS; - uint32_t saveDSPABASE; - uint32_t saveDSPASURF; - uint32_t saveDSPASTATUS; - uint32_t saveFPB0; - uint32_t saveFPB1; - uint32_t saveDPLL_B; - uint32_t saveDPLL_B_MD; - uint32_t saveHTOTAL_B; - uint32_t saveHBLANK_B; - uint32_t saveHSYNC_B; - uint32_t saveVTOTAL_B; - uint32_t saveVBLANK_B; - uint32_t saveVSYNC_B; - uint32_t saveDSPBSTRIDE; - uint32_t saveDSPBSIZE; - uint32_t saveDSPBPOS; - uint32_t saveDSPBBASE; - uint32_t saveDSPBSURF; - uint32_t saveDSPBSTATUS; - uint32_t saveVCLK_DIVISOR_VGA0; - uint32_t saveVCLK_DIVISOR_VGA1; - uint32_t saveVCLK_POST_DIV; - uint32_t saveVGACNTRL; - uint32_t saveADPA; - uint32_t saveLVDS; - uint32_t saveDVOA; - uint32_t saveDVOB; - uint32_t saveDVOC; - uint32_t savePP_ON; - uint32_t savePP_OFF; - uint32_t savePP_CONTROL; - uint32_t savePP_CYCLE; - uint32_t savePFIT_CONTROL; - uint32_t savePaletteA[256]; - uint32_t savePaletteB[256]; - uint32_t saveBLC_PWM_CTL2; - uint32_t saveBLC_PWM_CTL; - uint32_t saveCLOCKGATING; - uint32_t saveDSPARB; - uint32_t saveDSPATILEOFF; - uint32_t saveDSPBTILEOFF; - uint32_t saveDSPAADDR; - uint32_t saveDSPBADDR; - uint32_t savePFIT_AUTO_RATIOS; - uint32_t savePFIT_PGM_RATIOS; - uint32_t savePP_ON_DELAYS; - uint32_t savePP_OFF_DELAYS; - uint32_t savePP_DIVISOR; - uint32_t saveBSM; - uint32_t saveVBT; - uint32_t saveBCLRPAT_A; - uint32_t saveBCLRPAT_B; - uint32_t saveDSPALINOFF; - uint32_t saveDSPBLINOFF; - uint32_t savePERF_MODE; - uint32_t saveDSPFW1; - uint32_t saveDSPFW2; - uint32_t saveDSPFW3; - uint32_t saveDSPFW4; - uint32_t saveDSPFW5; - uint32_t saveDSPFW6; - uint32_t saveCHICKENBIT; - uint32_t saveDSPACURSOR_CTRL; - uint32_t saveDSPBCURSOR_CTRL; - uint32_t saveDSPACURSOR_BASE; - uint32_t saveDSPBCURSOR_BASE; - uint32_t saveDSPACURSOR_POS; - uint32_t saveDSPBCURSOR_POS; - uint32_t save_palette_a[256]; - uint32_t save_palette_b[256]; - uint32_t saveOV_OVADD; - uint32_t saveOV_OGAMC0; - uint32_t saveOV_OGAMC1; - uint32_t saveOV_OGAMC2; - uint32_t saveOV_OGAMC3; - uint32_t saveOV_OGAMC4; - uint32_t saveOV_OGAMC5; - uint32_t saveOVC_OVADD; - uint32_t saveOVC_OGAMC0; - uint32_t saveOVC_OGAMC1; - uint32_t saveOVC_OGAMC2; - uint32_t saveOVC_OGAMC3; - uint32_t saveOVC_OGAMC4; - uint32_t saveOVC_OGAMC5; - - /* MSI reg save */ - uint32_t msi_addr; - uint32_t msi_data; - - /* Medfield specific register save state */ - uint32_t saveHDMIPHYMISCCTL; - uint32_t saveHDMIB_CONTROL; - uint32_t saveDSPCCNTR; - uint32_t savePIPECCONF; - uint32_t savePIPECSRC; - uint32_t saveHTOTAL_C; - uint32_t saveHBLANK_C; - uint32_t saveHSYNC_C; - uint32_t saveVTOTAL_C; - uint32_t saveVBLANK_C; - uint32_t saveVSYNC_C; - uint32_t saveDSPCSTRIDE; - uint32_t saveDSPCSIZE; - uint32_t saveDSPCPOS; - uint32_t saveDSPCSURF; - uint32_t saveDSPCSTATUS; - uint32_t saveDSPCLINOFF; - uint32_t saveDSPCTILEOFF; - uint32_t saveDSPCCURSOR_CTRL; - uint32_t saveDSPCCURSOR_BASE; - uint32_t saveDSPCCURSOR_POS; - uint32_t save_palette_c[256]; - uint32_t saveOV_OVADD_C; - uint32_t saveOV_OGAMC0_C; - uint32_t saveOV_OGAMC1_C; - uint32_t saveOV_OGAMC2_C; - uint32_t saveOV_OGAMC3_C; - uint32_t saveOV_OGAMC4_C; - uint32_t saveOV_OGAMC5_C; - - /* DSI register save */ - uint32_t saveDEVICE_READY_REG; - uint32_t saveINTR_EN_REG; - uint32_t saveDSI_FUNC_PRG_REG; - uint32_t saveHS_TX_TIMEOUT_REG; - uint32_t saveLP_RX_TIMEOUT_REG; - uint32_t saveTURN_AROUND_TIMEOUT_REG; - uint32_t saveDEVICE_RESET_REG; - uint32_t saveDPI_RESOLUTION_REG; - uint32_t saveHORIZ_SYNC_PAD_COUNT_REG; - uint32_t saveHORIZ_BACK_PORCH_COUNT_REG; - uint32_t saveHORIZ_FRONT_PORCH_COUNT_REG; - uint32_t saveHORIZ_ACTIVE_AREA_COUNT_REG; - uint32_t saveVERT_SYNC_PAD_COUNT_REG; - uint32_t saveVERT_BACK_PORCH_COUNT_REG; - uint32_t saveVERT_FRONT_PORCH_COUNT_REG; - uint32_t saveHIGH_LOW_SWITCH_COUNT_REG; - uint32_t saveINIT_COUNT_REG; - uint32_t saveMAX_RET_PAK_REG; - uint32_t saveVIDEO_FMT_REG; - uint32_t saveEOT_DISABLE_REG; - uint32_t saveLP_BYTECLK_REG; - uint32_t saveHS_LS_DBI_ENABLE_REG; - uint32_t saveTXCLKESC_REG; - uint32_t saveDPHY_PARAM_REG; - uint32_t saveMIPI_CONTROL_REG; - uint32_t saveMIPI; - uint32_t saveMIPI_C; - - /* DPST register save */ - uint32_t saveHISTOGRAM_INT_CONTROL_REG; - uint32_t saveHISTOGRAM_LOGIC_CONTROL_REG; - uint32_t savePWM_CONTROL_LOGIC; - - /* - * DSI info. - */ - void * dbi_dsr_info; - void * dbi_dpu_info; - void * dsi_configs[2]; - /* - * LID-Switch - */ - spinlock_t lid_lock; - struct timer_list lid_timer; - struct psb_intel_opregion opregion; - u32 *lid_state; - u32 lid_last_state; - - /* - * Watchdog - */ - - uint32_t apm_reg; - uint16_t apm_base; - - /* - * Used for modifying backlight from - * xrandr -- consider removing and using HAL instead - */ - struct backlight_device *backlight_device; - struct drm_property *backlight_property; - uint32_t blc_adj1; - uint32_t blc_adj2; - - void *fbdev; - /* DPST state */ - uint32_t dsr_idle_count; - bool is_in_idle; - bool dsr_enable; - void (*exit_idle)(struct drm_device *dev, u32 update_src); - - /* 2D acceleration */ - spinlock_t lock_2d; - - /* FIXME: Arrays anyone ? */ - struct mdfld_dsi_encoder *encoder0; - struct mdfld_dsi_encoder *encoder2; - struct mdfld_dsi_dbi_output * dbi_output; - struct mdfld_dsi_dbi_output * dbi_output2; - u32 bpp; - u32 bpp2; - - bool dispstatus; -}; - - -/* - * Operations for each board type - */ - -struct psb_ops { - const char *name; - unsigned int accel_2d:1; - int pipes; /* Number of output pipes */ - int crtcs; /* Number of CRTCs */ - int sgx_offset; /* Base offset of SGX device */ - - /* Sub functions */ - struct drm_crtc_helper_funcs const *crtc_helper; - struct drm_crtc_funcs const *crtc_funcs; - - /* Setup hooks */ - int (*chip_setup)(struct drm_device *dev); - void (*chip_teardown)(struct drm_device *dev); - - /* Display management hooks */ - int (*output_init)(struct drm_device *dev); - /* Power management hooks */ - void (*init_pm)(struct drm_device *dev); - int (*save_regs)(struct drm_device *dev); - int (*restore_regs)(struct drm_device *dev); - int (*power_up)(struct drm_device *dev); - int (*power_down)(struct drm_device *dev); - - void (*lvds_bl_power)(struct drm_device *dev, bool on); -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - /* Backlight */ - int (*backlight_init)(struct drm_device *dev); -#endif - int i2c_bus; /* I2C bus identifier for Moorestown */ -}; - - - -struct psb_mmu_driver; - -extern int drm_crtc_probe_output_modes(struct drm_device *dev, int, int); -extern int drm_pick_crtcs(struct drm_device *dev); - -static inline struct drm_psb_private *psb_priv(struct drm_device *dev) -{ - return (struct drm_psb_private *) dev->dev_private; -} - -/* - * MMU stuff. - */ - -extern struct psb_mmu_driver *psb_mmu_driver_init(uint8_t __iomem * registers, - int trap_pagefaults, - int invalid_type, - struct drm_psb_private *dev_priv); -extern void psb_mmu_driver_takedown(struct psb_mmu_driver *driver); -extern struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver - *driver); -extern void psb_mmu_mirror_gtt(struct psb_mmu_pd *pd, uint32_t mmu_offset, - uint32_t gtt_start, uint32_t gtt_pages); -extern struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver, - int trap_pagefaults, - int invalid_type); -extern void psb_mmu_free_pagedir(struct psb_mmu_pd *pd); -extern void psb_mmu_flush(struct psb_mmu_driver *driver, int rc_prot); -extern void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd, - unsigned long address, - uint32_t num_pages); -extern int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd, - uint32_t start_pfn, - unsigned long address, - uint32_t num_pages, int type); -extern int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual, - unsigned long *pfn); - -/* - * Enable / disable MMU for different requestors. - */ - - -extern void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context); -extern int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages, - unsigned long address, uint32_t num_pages, - uint32_t desired_tile_stride, - uint32_t hw_tile_stride, int type); -extern void psb_mmu_remove_pages(struct psb_mmu_pd *pd, - unsigned long address, uint32_t num_pages, - uint32_t desired_tile_stride, - uint32_t hw_tile_stride); -/* - *psb_irq.c - */ - -extern irqreturn_t psb_irq_handler(DRM_IRQ_ARGS); -extern int psb_irq_enable_dpst(struct drm_device *dev); -extern int psb_irq_disable_dpst(struct drm_device *dev); -extern void psb_irq_preinstall(struct drm_device *dev); -extern int psb_irq_postinstall(struct drm_device *dev); -extern void psb_irq_uninstall(struct drm_device *dev); -extern void psb_irq_turn_on_dpst(struct drm_device *dev); -extern void psb_irq_turn_off_dpst(struct drm_device *dev); - -extern void psb_irq_uninstall_islands(struct drm_device *dev, int hw_islands); -extern int psb_vblank_wait2(struct drm_device *dev, unsigned int *sequence); -extern int psb_vblank_wait(struct drm_device *dev, unsigned int *sequence); -extern int psb_enable_vblank(struct drm_device *dev, int crtc); -extern void psb_disable_vblank(struct drm_device *dev, int crtc); -void -psb_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask); - -void -psb_disable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask); - -extern u32 psb_get_vblank_counter(struct drm_device *dev, int crtc); - -extern int mdfld_enable_te(struct drm_device *dev, int pipe); -extern void mdfld_disable_te(struct drm_device *dev, int pipe); - -/* - * intel_opregion.c - */ -extern int gma_intel_opregion_init(struct drm_device *dev); -extern int gma_intel_opregion_exit(struct drm_device *dev); - -/* - * framebuffer.c - */ -extern int psbfb_probed(struct drm_device *dev); -extern int psbfb_remove(struct drm_device *dev, - struct drm_framebuffer *fb); -/* - * accel_2d.c - */ -extern void psbfb_copyarea(struct fb_info *info, - const struct fb_copyarea *region); -extern int psbfb_sync(struct fb_info *info); -extern void psb_spank(struct drm_psb_private *dev_priv); -extern int psb_accel_ioctl(struct drm_device *dev, void *data, - struct drm_file *file); - -/* - * psb_reset.c - */ - -extern void psb_lid_timer_init(struct drm_psb_private *dev_priv); -extern void psb_lid_timer_takedown(struct drm_psb_private *dev_priv); -extern void psb_print_pagefault(struct drm_psb_private *dev_priv); - -/* modesetting */ -extern void psb_modeset_init(struct drm_device *dev); -extern void psb_modeset_cleanup(struct drm_device *dev); -extern int psb_fbdev_init(struct drm_device *dev); - -/* backlight.c */ -int gma_backlight_init(struct drm_device *dev); -void gma_backlight_exit(struct drm_device *dev); - -/* mrst_crtc.c */ -extern const struct drm_crtc_helper_funcs mrst_helper_funcs; - -/* mrst_lvds.c */ -extern void mrst_lvds_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev); - -/* psb_intel_display.c */ -extern const struct drm_crtc_helper_funcs psb_intel_helper_funcs; -extern const struct drm_crtc_funcs psb_intel_crtc_funcs; - -/* psb_intel_lvds.c */ -extern const struct drm_connector_helper_funcs - psb_intel_lvds_connector_helper_funcs; -extern const struct drm_connector_funcs psb_intel_lvds_connector_funcs; - -/* gem.c */ -extern int psb_gem_init_object(struct drm_gem_object *obj); -extern void psb_gem_free_object(struct drm_gem_object *obj); -extern int psb_gem_get_aperture(struct drm_device *dev, void *data, - struct drm_file *file); -extern int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev, - struct drm_mode_create_dumb *args); -extern int psb_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev, - uint32_t handle); -extern int psb_gem_dumb_map_gtt(struct drm_file *file, struct drm_device *dev, - uint32_t handle, uint64_t *offset); -extern int psb_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); -extern int psb_gem_create_ioctl(struct drm_device *dev, void *data, - struct drm_file *file); -extern int psb_gem_mmap_ioctl(struct drm_device *dev, void *data, - struct drm_file *file); - -/* psb_device.c */ -extern const struct psb_ops psb_chip_ops; - -/* mrst_device.c */ -extern const struct psb_ops mrst_chip_ops; - -/* mdfld_device.c */ -extern const struct psb_ops mdfld_chip_ops; - -/* cdv_device.c */ -extern const struct psb_ops cdv_chip_ops; - -/* - * Debug print bits setting - */ -#define PSB_D_GENERAL (1 << 0) -#define PSB_D_INIT (1 << 1) -#define PSB_D_IRQ (1 << 2) -#define PSB_D_ENTRY (1 << 3) -/* debug the get H/V BP/FP count */ -#define PSB_D_HV (1 << 4) -#define PSB_D_DBI_BF (1 << 5) -#define PSB_D_PM (1 << 6) -#define PSB_D_RENDER (1 << 7) -#define PSB_D_REG (1 << 8) -#define PSB_D_MSVDX (1 << 9) -#define PSB_D_TOPAZ (1 << 10) - -extern int drm_psb_no_fb; -extern int drm_idle_check_interval; - -/* - * Utilities - */ - -static inline u32 MRST_MSG_READ32(uint port, uint offset) -{ - int mcr = (0xD0<<24) | (port << 16) | (offset << 8); - uint32_t ret_val = 0; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - pci_write_config_dword(pci_root, 0xD0, mcr); - pci_read_config_dword(pci_root, 0xD4, &ret_val); - pci_dev_put(pci_root); - return ret_val; -} -static inline void MRST_MSG_WRITE32(uint port, uint offset, u32 value) -{ - int mcr = (0xE0<<24) | (port << 16) | (offset << 8) | 0xF0; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - pci_write_config_dword(pci_root, 0xD4, value); - pci_write_config_dword(pci_root, 0xD0, mcr); - pci_dev_put(pci_root); -} -static inline u32 MDFLD_MSG_READ32(uint port, uint offset) -{ - int mcr = (0x10<<24) | (port << 16) | (offset << 8); - uint32_t ret_val = 0; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - pci_write_config_dword(pci_root, 0xD0, mcr); - pci_read_config_dword(pci_root, 0xD4, &ret_val); - pci_dev_put(pci_root); - return ret_val; -} -static inline void MDFLD_MSG_WRITE32(uint port, uint offset, u32 value) -{ - int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0; - struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); - pci_write_config_dword(pci_root, 0xD4, value); - pci_write_config_dword(pci_root, 0xD0, mcr); - pci_dev_put(pci_root); -} - -static inline uint32_t REGISTER_READ(struct drm_device *dev, uint32_t reg) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - return ioread32(dev_priv->vdc_reg + reg); -} - -#define REG_READ(reg) REGISTER_READ(dev, (reg)) - -static inline void REGISTER_WRITE(struct drm_device *dev, uint32_t reg, - uint32_t val) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - iowrite32((val), dev_priv->vdc_reg + (reg)); -} - -#define REG_WRITE(reg, val) REGISTER_WRITE(dev, (reg), (val)) - -static inline void REGISTER_WRITE16(struct drm_device *dev, - uint32_t reg, uint32_t val) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - iowrite16((val), dev_priv->vdc_reg + (reg)); -} - -#define REG_WRITE16(reg, val) REGISTER_WRITE16(dev, (reg), (val)) - -static inline void REGISTER_WRITE8(struct drm_device *dev, - uint32_t reg, uint32_t val) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - iowrite8((val), dev_priv->vdc_reg + (reg)); -} - -#define REG_WRITE8(reg, val) REGISTER_WRITE8(dev, (reg), (val)) - -#define PSB_WVDC32(_val, _offs) iowrite32(_val, dev_priv->vdc_reg + (_offs)) -#define PSB_RVDC32(_offs) ioread32(dev_priv->vdc_reg + (_offs)) - -/* #define TRAP_SGX_PM_FAULT 1 */ -#ifdef TRAP_SGX_PM_FAULT -#define PSB_RSGX32(_offs) \ -({ \ - if (inl(dev_priv->apm_base + PSB_APM_STS) & 0x3) { \ - printk(KERN_ERR \ - "access sgx when it's off!! (READ) %s, %d\n", \ - __FILE__, __LINE__); \ - melay(1000); \ - } \ - ioread32(dev_priv->sgx_reg + (_offs)); \ -}) -#else -#define PSB_RSGX32(_offs) ioread32(dev_priv->sgx_reg + (_offs)) -#endif -#define PSB_WSGX32(_val, _offs) iowrite32(_val, dev_priv->sgx_reg + (_offs)) - -#define MSVDX_REG_DUMP 0 - -#define PSB_WMSVDX32(_val, _offs) iowrite32(_val, dev_priv->msvdx_reg + (_offs)) -#define PSB_RMSVDX32(_offs) ioread32(dev_priv->msvdx_reg + (_offs)) - -#endif diff --git a/drivers/staging/gma500/psb_intel_display.c b/drivers/staging/gma500/psb_intel_display.c deleted file mode 100644 index 85659613ae62..000000000000 --- a/drivers/staging/gma500/psb_intel_display.c +++ /dev/null @@ -1,1429 +0,0 @@ -/* - * Copyright © 2006-2011 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - */ - -#include -#include - -#include -#include "framebuffer.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "psb_intel_display.h" -#include "power.h" - -#include "mdfld_output.h" - -struct psb_intel_clock_t { - /* given values */ - int n; - int m1, m2; - int p1, p2; - /* derived values */ - int dot; - int vco; - int m; - int p; -}; - -struct psb_intel_range_t { - int min, max; -}; - -struct psb_intel_p2_t { - int dot_limit; - int p2_slow, p2_fast; -}; - -#define INTEL_P2_NUM 2 - -struct psb_intel_limit_t { - struct psb_intel_range_t dot, vco, n, m, m1, m2, p, p1; - struct psb_intel_p2_t p2; -}; - -#define I8XX_DOT_MIN 25000 -#define I8XX_DOT_MAX 350000 -#define I8XX_VCO_MIN 930000 -#define I8XX_VCO_MAX 1400000 -#define I8XX_N_MIN 3 -#define I8XX_N_MAX 16 -#define I8XX_M_MIN 96 -#define I8XX_M_MAX 140 -#define I8XX_M1_MIN 18 -#define I8XX_M1_MAX 26 -#define I8XX_M2_MIN 6 -#define I8XX_M2_MAX 16 -#define I8XX_P_MIN 4 -#define I8XX_P_MAX 128 -#define I8XX_P1_MIN 2 -#define I8XX_P1_MAX 33 -#define I8XX_P1_LVDS_MIN 1 -#define I8XX_P1_LVDS_MAX 6 -#define I8XX_P2_SLOW 4 -#define I8XX_P2_FAST 2 -#define I8XX_P2_LVDS_SLOW 14 -#define I8XX_P2_LVDS_FAST 14 /* No fast option */ -#define I8XX_P2_SLOW_LIMIT 165000 - -#define I9XX_DOT_MIN 20000 -#define I9XX_DOT_MAX 400000 -#define I9XX_VCO_MIN 1400000 -#define I9XX_VCO_MAX 2800000 -#define I9XX_N_MIN 3 -#define I9XX_N_MAX 8 -#define I9XX_M_MIN 70 -#define I9XX_M_MAX 120 -#define I9XX_M1_MIN 10 -#define I9XX_M1_MAX 20 -#define I9XX_M2_MIN 5 -#define I9XX_M2_MAX 9 -#define I9XX_P_SDVO_DAC_MIN 5 -#define I9XX_P_SDVO_DAC_MAX 80 -#define I9XX_P_LVDS_MIN 7 -#define I9XX_P_LVDS_MAX 98 -#define I9XX_P1_MIN 1 -#define I9XX_P1_MAX 8 -#define I9XX_P2_SDVO_DAC_SLOW 10 -#define I9XX_P2_SDVO_DAC_FAST 5 -#define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 -#define I9XX_P2_LVDS_SLOW 14 -#define I9XX_P2_LVDS_FAST 7 -#define I9XX_P2_LVDS_SLOW_LIMIT 112000 - -#define INTEL_LIMIT_I8XX_DVO_DAC 0 -#define INTEL_LIMIT_I8XX_LVDS 1 -#define INTEL_LIMIT_I9XX_SDVO_DAC 2 -#define INTEL_LIMIT_I9XX_LVDS 3 - -static const struct psb_intel_limit_t psb_intel_limits[] = { - { /* INTEL_LIMIT_I8XX_DVO_DAC */ - .dot = {.min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX}, - .vco = {.min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX}, - .n = {.min = I8XX_N_MIN, .max = I8XX_N_MAX}, - .m = {.min = I8XX_M_MIN, .max = I8XX_M_MAX}, - .m1 = {.min = I8XX_M1_MIN, .max = I8XX_M1_MAX}, - .m2 = {.min = I8XX_M2_MIN, .max = I8XX_M2_MAX}, - .p = {.min = I8XX_P_MIN, .max = I8XX_P_MAX}, - .p1 = {.min = I8XX_P1_MIN, .max = I8XX_P1_MAX}, - .p2 = {.dot_limit = I8XX_P2_SLOW_LIMIT, - .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST}, - }, - { /* INTEL_LIMIT_I8XX_LVDS */ - .dot = {.min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX}, - .vco = {.min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX}, - .n = {.min = I8XX_N_MIN, .max = I8XX_N_MAX}, - .m = {.min = I8XX_M_MIN, .max = I8XX_M_MAX}, - .m1 = {.min = I8XX_M1_MIN, .max = I8XX_M1_MAX}, - .m2 = {.min = I8XX_M2_MIN, .max = I8XX_M2_MAX}, - .p = {.min = I8XX_P_MIN, .max = I8XX_P_MAX}, - .p1 = {.min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX}, - .p2 = {.dot_limit = I8XX_P2_SLOW_LIMIT, - .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST}, - }, - { /* INTEL_LIMIT_I9XX_SDVO_DAC */ - .dot = {.min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, - .vco = {.min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX}, - .n = {.min = I9XX_N_MIN, .max = I9XX_N_MAX}, - .m = {.min = I9XX_M_MIN, .max = I9XX_M_MAX}, - .m1 = {.min = I9XX_M1_MIN, .max = I9XX_M1_MAX}, - .m2 = {.min = I9XX_M2_MIN, .max = I9XX_M2_MAX}, - .p = {.min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX}, - .p1 = {.min = I9XX_P1_MIN, .max = I9XX_P1_MAX}, - .p2 = {.dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, - .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = - I9XX_P2_SDVO_DAC_FAST}, - }, - { /* INTEL_LIMIT_I9XX_LVDS */ - .dot = {.min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, - .vco = {.min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX}, - .n = {.min = I9XX_N_MIN, .max = I9XX_N_MAX}, - .m = {.min = I9XX_M_MIN, .max = I9XX_M_MAX}, - .m1 = {.min = I9XX_M1_MIN, .max = I9XX_M1_MAX}, - .m2 = {.min = I9XX_M2_MIN, .max = I9XX_M2_MAX}, - .p = {.min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX}, - .p1 = {.min = I9XX_P1_MIN, .max = I9XX_P1_MAX}, - /* The single-channel range is 25-112Mhz, and dual-channel - * is 80-224Mhz. Prefer single channel as much as possible. - */ - .p2 = {.dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, - .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST}, - }, -}; - -static const struct psb_intel_limit_t *psb_intel_limit(struct drm_crtc *crtc) -{ - const struct psb_intel_limit_t *limit; - - if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS]; - else - limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; - return limit; -} - -/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ - -static void i8xx_clock(int refclk, struct psb_intel_clock_t *clock) -{ - clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); - clock->p = clock->p1 * clock->p2; - clock->vco = refclk * clock->m / (clock->n + 2); - clock->dot = clock->vco / clock->p; -} - -/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ - -static void i9xx_clock(int refclk, struct psb_intel_clock_t *clock) -{ - clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); - clock->p = clock->p1 * clock->p2; - clock->vco = refclk * clock->m / (clock->n + 2); - clock->dot = clock->vco / clock->p; -} - -static void psb_intel_clock(struct drm_device *dev, int refclk, - struct psb_intel_clock_t *clock) -{ - return i9xx_clock(refclk, clock); -} - -/** - * Returns whether any output on the specified pipe is of the specified type - */ -bool psb_intel_pipe_has_type(struct drm_crtc *crtc, int type) -{ - struct drm_device *dev = crtc->dev; - struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_connector *l_entry; - - list_for_each_entry(l_entry, &mode_config->connector_list, head) { - if (l_entry->encoder && l_entry->encoder->crtc == crtc) { - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(l_entry); - if (psb_intel_output->type == type) - return true; - } - } - return false; -} - -#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } -/** - * Returns whether the given set of divisors are valid for a given refclk with - * the given connectors. - */ - -static bool psb_intel_PLL_is_valid(struct drm_crtc *crtc, - struct psb_intel_clock_t *clock) -{ - const struct psb_intel_limit_t *limit = psb_intel_limit(crtc); - - if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) - INTELPllInvalid("p1 out of range\n"); - if (clock->p < limit->p.min || limit->p.max < clock->p) - INTELPllInvalid("p out of range\n"); - if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) - INTELPllInvalid("m2 out of range\n"); - if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) - INTELPllInvalid("m1 out of range\n"); - if (clock->m1 <= clock->m2) - INTELPllInvalid("m1 <= m2\n"); - if (clock->m < limit->m.min || limit->m.max < clock->m) - INTELPllInvalid("m out of range\n"); - if (clock->n < limit->n.min || limit->n.max < clock->n) - INTELPllInvalid("n out of range\n"); - if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) - INTELPllInvalid("vco out of range\n"); - /* XXX: We may need to be checking "Dot clock" - * depending on the multiplier, connector, etc., - * rather than just a single range. - */ - if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) - INTELPllInvalid("dot out of range\n"); - - return true; -} - -/** - * Returns a set of divisors for the desired target clock with the given - * refclk, or FALSE. The returned values represent the clock equation: - * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. - */ -static bool psb_intel_find_best_PLL(struct drm_crtc *crtc, int target, - int refclk, - struct psb_intel_clock_t *best_clock) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_clock_t clock; - const struct psb_intel_limit_t *limit = psb_intel_limit(crtc); - int err = target; - - if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && - (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { - /* - * For LVDS, if the panel is on, just rely on its current - * settings for dual-channel. We haven't figured out how to - * reliably set up different single/dual channel state, if we - * even can. - */ - if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) - clock.p2 = limit->p2.p2_fast; - else - clock.p2 = limit->p2.p2_slow; - } else { - if (target < limit->p2.dot_limit) - clock.p2 = limit->p2.p2_slow; - else - clock.p2 = limit->p2.p2_fast; - } - - memset(best_clock, 0, sizeof(*best_clock)); - - for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; - clock.m1++) { - for (clock.m2 = limit->m2.min; - clock.m2 < clock.m1 && clock.m2 <= limit->m2.max; - clock.m2++) { - for (clock.n = limit->n.min; - clock.n <= limit->n.max; clock.n++) { - for (clock.p1 = limit->p1.min; - clock.p1 <= limit->p1.max; - clock.p1++) { - int this_err; - - psb_intel_clock(dev, refclk, &clock); - - if (!psb_intel_PLL_is_valid - (crtc, &clock)) - continue; - - this_err = abs(clock.dot - target); - if (this_err < err) { - *best_clock = clock; - err = this_err; - } - } - } - } - } - - return err != target; -} - -void psb_intel_wait_for_vblank(struct drm_device *dev) -{ - /* Wait for 20ms, i.e. one cycle at 50hz. */ - mdelay(20); -} - -int psb_intel_pipe_set_base(struct drm_crtc *crtc, - int x, int y, struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - /* struct drm_i915_master_private *master_priv; */ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); - int pipe = psb_intel_crtc->pipe; - unsigned long start, offset; - int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE); - int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); - int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - u32 dspcntr; - int ret = 0; - - if (!gma_power_begin(dev, true)) - return 0; - - /* no fb bound */ - if (!crtc->fb) { - dev_dbg(dev->dev, "No FB bound\n"); - goto psb_intel_pipe_cleaner; - } - - /* We are displaying this buffer, make sure it is actually loaded - into the GTT */ - ret = psb_gtt_pin(psbfb->gtt); - if (ret < 0) - goto psb_intel_pipe_set_base_exit; - start = psbfb->gtt->offset; - - offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8); - - REG_WRITE(dspstride, crtc->fb->pitches[0]); - - dspcntr = REG_READ(dspcntr_reg); - dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; - - switch (crtc->fb->bits_per_pixel) { - case 8: - dspcntr |= DISPPLANE_8BPP; - break; - case 16: - if (crtc->fb->depth == 15) - dspcntr |= DISPPLANE_15_16BPP; - else - dspcntr |= DISPPLANE_16BPP; - break; - case 24: - case 32: - dspcntr |= DISPPLANE_32BPP_NO_ALPHA; - break; - default: - dev_err(dev->dev, "Unknown color depth\n"); - ret = -EINVAL; - psb_gtt_unpin(psbfb->gtt); - goto psb_intel_pipe_set_base_exit; - } - REG_WRITE(dspcntr_reg, dspcntr); - - - if (0 /* FIXMEAC - check what PSB needs */) { - REG_WRITE(dspbase, offset); - REG_READ(dspbase); - REG_WRITE(dspsurf, start); - REG_READ(dspsurf); - } else { - REG_WRITE(dspbase, start + offset); - REG_READ(dspbase); - } - -psb_intel_pipe_cleaner: - /* If there was a previous display we can now unpin it */ - if (old_fb) - psb_gtt_unpin(to_psb_fb(old_fb)->gtt); - -psb_intel_pipe_set_base_exit: - gma_power_end(dev); - return ret; -} - -/** - * Sets the power management mode of the pipe and plane. - * - * This code should probably grow support for turning the cursor off and back - * on appropriately at the same time as we're turning the pipe off/on. - */ -static void psb_intel_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - struct drm_device *dev = crtc->dev; - /* struct drm_i915_master_private *master_priv; */ - /* struct drm_i915_private *dev_priv = dev->dev_private; */ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - u32 temp; - bool enabled; - - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - /* Enable the DPLL */ - temp = REG_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) == 0) { - REG_WRITE(dpll_reg, temp); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - } - - /* Enable the pipe */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) == 0) - REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); - - /* Enable the plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - REG_WRITE(dspcntr_reg, - temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - } - - psb_intel_crtc_load_lut(crtc); - - /* Give the overlay scaler a chance to enable - * if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, true); TODO */ - break; - case DRM_MODE_DPMS_OFF: - /* Give the overlay scaler a chance to disable - * if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - - /* Disable display plane */ - temp = REG_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(dspcntr_reg, - temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); - REG_READ(dspbase_reg); - } - - /* Next, disable display pipes */ - temp = REG_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); - REG_READ(pipeconf_reg); - } - - /* Wait for vblank for the disable to take effect. */ - psb_intel_wait_for_vblank(dev); - - temp = REG_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) != 0) { - REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - } - - /* Wait for the clocks to turn off. */ - udelay(150); - break; - } - - enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; - - /*Set FIFO Watermarks*/ - REG_WRITE(DSPARB, 0x3F3E); -} - -static void psb_intel_crtc_prepare(struct drm_crtc *crtc) -{ - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); -} - -static void psb_intel_crtc_commit(struct drm_crtc *crtc) -{ - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); -} - -void psb_intel_encoder_prepare(struct drm_encoder *encoder) -{ - struct drm_encoder_helper_funcs *encoder_funcs = - encoder->helper_private; - /* lvds has its own version of prepare see psb_intel_lvds_prepare */ - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); -} - -void psb_intel_encoder_commit(struct drm_encoder *encoder) -{ - struct drm_encoder_helper_funcs *encoder_funcs = - encoder->helper_private; - /* lvds has its own version of commit see psb_intel_lvds_commit */ - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); -} - -static bool psb_intel_crtc_mode_fixup(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - return true; -} - - -/** - * Return the pipe currently connected to the panel fitter, - * or -1 if the panel fitter is not present or not in use - */ -static int psb_intel_panel_fitter_pipe(struct drm_device *dev) -{ - u32 pfit_control; - - pfit_control = REG_READ(PFIT_CONTROL); - - /* See if the panel fitter is in use */ - if ((pfit_control & PFIT_ENABLE) == 0) - return -1; - /* Must be on PIPE 1 for PSB */ - return 1; -} - -static int psb_intel_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - int pipe = psb_intel_crtc->pipe; - int fp_reg = (pipe == 0) ? FPA0 : FPB0; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; - int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; - int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; - int refclk; - struct psb_intel_clock_t clock; - u32 dpll = 0, fp = 0, dspcntr, pipeconf; - bool ok, is_sdvo = false, is_dvo = false; - bool is_crt = false, is_lvds = false, is_tv = false; - struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_connector *connector; - - /* No scan out no play */ - if (crtc->fb == NULL) { - crtc_funcs->mode_set_base(crtc, x, y, old_fb); - return 0; - } - - list_for_each_entry(connector, &mode_config->connector_list, head) { - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - if (!connector->encoder - || connector->encoder->crtc != crtc) - continue; - - switch (psb_intel_output->type) { - case INTEL_OUTPUT_LVDS: - is_lvds = true; - break; - case INTEL_OUTPUT_SDVO: - is_sdvo = true; - break; - case INTEL_OUTPUT_DVO: - is_dvo = true; - break; - case INTEL_OUTPUT_TVOUT: - is_tv = true; - break; - case INTEL_OUTPUT_ANALOG: - is_crt = true; - break; - } - } - - refclk = 96000; - - ok = psb_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, - &clock); - if (!ok) { - dev_err(dev->dev, "Couldn't find PLL settings for mode!\n"); - return 0; - } - - fp = clock.n << 16 | clock.m1 << 8 | clock.m2; - - dpll = DPLL_VGA_MODE_DIS; - if (is_lvds) { - dpll |= DPLLB_MODE_LVDS; - dpll |= DPLL_DVO_HIGH_SPEED; - } else - dpll |= DPLLB_MODE_DAC_SERIAL; - if (is_sdvo) { - int sdvo_pixel_multiply = - adjusted_mode->clock / mode->clock; - dpll |= DPLL_DVO_HIGH_SPEED; - dpll |= - (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; - } - - /* compute bitmask from p1 value */ - dpll |= (1 << (clock.p1 - 1)) << 16; - switch (clock.p2) { - case 5: - dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; - break; - case 7: - dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; - break; - case 10: - dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; - break; - case 14: - dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; - break; - } - - if (is_tv) { - /* XXX: just matching BIOS for now */ -/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ - dpll |= 3; - } - dpll |= PLL_REF_INPUT_DREFCLK; - - /* setup pipeconf */ - pipeconf = REG_READ(pipeconf_reg); - - /* Set up the display plane register */ - dspcntr = DISPPLANE_GAMMA_ENABLE; - - if (pipe == 0) - dspcntr |= DISPPLANE_SEL_PIPE_A; - else - dspcntr |= DISPPLANE_SEL_PIPE_B; - - dspcntr |= DISPLAY_PLANE_ENABLE; - pipeconf |= PIPEACONF_ENABLE; - dpll |= DPLL_VCO_ENABLE; - - - /* Disable the panel fitter if it was on our pipe */ - if (psb_intel_panel_fitter_pipe(dev) == pipe) - REG_WRITE(PFIT_CONTROL, 0); - - drm_mode_debug_printmodeline(mode); - - if (dpll & DPLL_VCO_ENABLE) { - REG_WRITE(fp_reg, fp); - REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); - REG_READ(dpll_reg); - udelay(150); - } - - /* The LVDS pin pair needs to be on before the DPLLs are enabled. - * This is an exception to the general rule that mode_set doesn't turn - * things on. - */ - if (is_lvds) { - u32 lvds = REG_READ(LVDS); - - lvds &= ~LVDS_PIPEB_SELECT; - if (pipe == 1) - lvds |= LVDS_PIPEB_SELECT; - - lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - /* Set the B0-B3 data pairs corresponding to - * whether we're going to - * set the DPLLs for dual-channel mode or not. - */ - lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); - if (clock.p2 == 7) - lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) - * appropriately here, but we need to look more - * thoroughly into how panels behave in the two modes. - */ - - REG_WRITE(LVDS, lvds); - REG_READ(LVDS); - } - - REG_WRITE(fp_reg, fp); - REG_WRITE(dpll_reg, dpll); - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - - /* write it again -- the BIOS does, after all */ - REG_WRITE(dpll_reg, dpll); - - REG_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - - REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | - ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | - ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | - ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | - ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | - ((adjusted_mode->crtc_vsync_end - 1) << 16)); - /* pipesrc and dspsize control the size that is scaled from, - * which should always be the user's requested size. - */ - REG_WRITE(dspsize_reg, - ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); - REG_WRITE(dsppos_reg, 0); - REG_WRITE(pipesrc_reg, - ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); - REG_WRITE(pipeconf_reg, pipeconf); - REG_READ(pipeconf_reg); - - psb_intel_wait_for_vblank(dev); - - REG_WRITE(dspcntr_reg, dspcntr); - - /* Flush the plane changes */ - crtc_funcs->mode_set_base(crtc, x, y, old_fb); - - psb_intel_wait_for_vblank(dev); - - return 0; -} - -/** Loads the palette/gamma unit for the CRTC with the prepared values */ -void psb_intel_crtc_load_lut(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_psb_private *dev_priv = - (struct drm_psb_private *)dev->dev_private; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int palreg = PALETTE_A; - int i; - - /* The clocks have to be on to load the palette. */ - if (!crtc->enabled) - return; - - switch (psb_intel_crtc->pipe) { - case 0: - break; - case 1: - palreg = PALETTE_B; - break; - case 2: - palreg = PALETTE_C; - break; - default: - dev_err(dev->dev, "Illegal Pipe Number.\n"); - return; - } - - if (gma_power_begin(dev, false)) { - for (i = 0; i < 256; i++) { - REG_WRITE(palreg + 4 * i, - ((psb_intel_crtc->lut_r[i] + - psb_intel_crtc->lut_adj[i]) << 16) | - ((psb_intel_crtc->lut_g[i] + - psb_intel_crtc->lut_adj[i]) << 8) | - (psb_intel_crtc->lut_b[i] + - psb_intel_crtc->lut_adj[i])); - } - gma_power_end(dev); - } else { - for (i = 0; i < 256; i++) { - dev_priv->save_palette_a[i] = - ((psb_intel_crtc->lut_r[i] + - psb_intel_crtc->lut_adj[i]) << 16) | - ((psb_intel_crtc->lut_g[i] + - psb_intel_crtc->lut_adj[i]) << 8) | - (psb_intel_crtc->lut_b[i] + - psb_intel_crtc->lut_adj[i]); - } - - } -} - -/** - * Save HW states of giving crtc - */ -static void psb_intel_crtc_save(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - /* struct drm_psb_private *dev_priv = - (struct drm_psb_private *)dev->dev_private; */ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; - int pipeA = (psb_intel_crtc->pipe == 0); - uint32_t paletteReg; - int i; - - if (!crtc_state) { - dev_err(dev->dev, "No CRTC state found\n"); - return; - } - - crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR); - crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF); - crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC); - crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0); - crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1); - crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B); - crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B); - crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B); - crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B); - crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B); - crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B); - crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B); - crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE); - - /*NOTE: DSPSIZE DSPPOS only for psb*/ - crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE); - crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS); - - crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE); - - paletteReg = pipeA ? PALETTE_A : PALETTE_B; - for (i = 0; i < 256; ++i) - crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2)); -} - -/** - * Restore HW states of giving crtc - */ -static void psb_intel_crtc_restore(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - /* struct drm_psb_private * dev_priv = - (struct drm_psb_private *)dev->dev_private; */ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; - /* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */ - int pipeA = (psb_intel_crtc->pipe == 0); - uint32_t paletteReg; - int i; - - if (!crtc_state) { - dev_err(dev->dev, "No crtc state\n"); - return; - } - - if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { - REG_WRITE(pipeA ? DPLL_A : DPLL_B, - crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); - REG_READ(pipeA ? DPLL_A : DPLL_B); - udelay(150); - } - - REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0); - REG_READ(pipeA ? FPA0 : FPB0); - - REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1); - REG_READ(pipeA ? FPA1 : FPB1); - - REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL); - REG_READ(pipeA ? DPLL_A : DPLL_B); - udelay(150); - - REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL); - REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK); - REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC); - REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL); - REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK); - REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC); - REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE); - - REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE); - REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS); - - REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC); - REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE); - REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF); - - psb_intel_wait_for_vblank(dev); - - REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR); - REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE); - - psb_intel_wait_for_vblank(dev); - - paletteReg = pipeA ? PALETTE_A : PALETTE_B; - for (i = 0; i < 256; ++i) - REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]); -} - -static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, - struct drm_file *file_priv, - uint32_t handle, - uint32_t width, uint32_t height) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; - uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; - uint32_t temp; - size_t addr = 0; - struct gtt_range *gt; - struct drm_gem_object *obj; - int ret; - - /* if we want to turn of the cursor ignore width and height */ - if (!handle) { - /* turn off the cursor */ - temp = CURSOR_MODE_DISABLE; - - if (gma_power_begin(dev, false)) { - REG_WRITE(control, temp); - REG_WRITE(base, 0); - gma_power_end(dev); - } - - /* Unpin the old GEM object */ - if (psb_intel_crtc->cursor_obj) { - gt = container_of(psb_intel_crtc->cursor_obj, - struct gtt_range, gem); - psb_gtt_unpin(gt); - drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = NULL; - } - - return 0; - } - - /* Currently we only support 64x64 cursors */ - if (width != 64 || height != 64) { - dev_dbg(dev->dev, "we currently only support 64x64 cursors\n"); - return -EINVAL; - } - - obj = drm_gem_object_lookup(dev, file_priv, handle); - if (!obj) - return -ENOENT; - - if (obj->size < width * height * 4) { - dev_dbg(dev->dev, "buffer is to small\n"); - return -ENOMEM; - } - - gt = container_of(obj, struct gtt_range, gem); - - /* Pin the memory into the GTT */ - ret = psb_gtt_pin(gt); - if (ret) { - dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); - return ret; - } - - - addr = gt->offset; /* Or resource.start ??? */ - - psb_intel_crtc->cursor_addr = addr; - - temp = 0; - /* set the pipe for the cursor */ - temp |= (pipe << 28); - temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; - - if (gma_power_begin(dev, false)) { - REG_WRITE(control, temp); - REG_WRITE(base, addr); - gma_power_end(dev); - } - - /* unpin the old bo */ - if (psb_intel_crtc->cursor_obj) { - gt = container_of(psb_intel_crtc->cursor_obj, - struct gtt_range, gem); - psb_gtt_unpin(gt); - drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = obj; - } - return 0; -} - -static int psb_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) -{ - struct drm_device *dev = crtc->dev; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - uint32_t temp = 0; - uint32_t addr; - - - if (x < 0) { - temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); - x = -x; - } - if (y < 0) { - temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); - y = -y; - } - - temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); - temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); - - addr = psb_intel_crtc->cursor_addr; - - if (gma_power_begin(dev, false)) { - REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); - REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr); - gma_power_end(dev); - } - return 0; -} - -void psb_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, - u16 *green, u16 *blue, uint32_t type, uint32_t size) -{ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int i; - - if (size != 256) - return; - - for (i = 0; i < 256; i++) { - psb_intel_crtc->lut_r[i] = red[i] >> 8; - psb_intel_crtc->lut_g[i] = green[i] >> 8; - psb_intel_crtc->lut_b[i] = blue[i] >> 8; - } - - psb_intel_crtc_load_lut(crtc); -} - -static int psb_crtc_set_config(struct drm_mode_set *set) -{ - int ret; - struct drm_device *dev = set->crtc->dev; - - pm_runtime_forbid(&dev->pdev->dev); - ret = drm_crtc_helper_set_config(set); - pm_runtime_allow(&dev->pdev->dev); - return ret; -} - -/* Returns the clock of the currently programmed mode of the given pipe. */ -static int psb_intel_crtc_clock_get(struct drm_device *dev, - struct drm_crtc *crtc) -{ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - u32 dpll; - u32 fp; - struct psb_intel_clock_t clock; - bool is_lvds; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (gma_power_begin(dev, false)) { - dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B); - if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) - fp = REG_READ((pipe == 0) ? FPA0 : FPB0); - else - fp = REG_READ((pipe == 0) ? FPA1 : FPB1); - is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); - gma_power_end(dev); - } else { - dpll = (pipe == 0) ? - dev_priv->saveDPLL_A : dev_priv->saveDPLL_B; - - if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) - fp = (pipe == 0) ? - dev_priv->saveFPA0 : - dev_priv->saveFPB0; - else - fp = (pipe == 0) ? - dev_priv->saveFPA1 : - dev_priv->saveFPB1; - - is_lvds = (pipe == 1) && (dev_priv->saveLVDS & LVDS_PORT_EN); - } - - clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; - clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; - clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; - - if (is_lvds) { - clock.p1 = - ffs((dpll & - DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> - DPLL_FPA01_P1_POST_DIV_SHIFT); - clock.p2 = 14; - - if ((dpll & PLL_REF_INPUT_MASK) == - PLLB_REF_INPUT_SPREADSPECTRUMIN) { - /* XXX: might not be 66MHz */ - i8xx_clock(66000, &clock); - } else - i8xx_clock(48000, &clock); - } else { - if (dpll & PLL_P1_DIVIDE_BY_TWO) - clock.p1 = 2; - else { - clock.p1 = - ((dpll & - DPLL_FPA01_P1_POST_DIV_MASK_I830) >> - DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; - } - if (dpll & PLL_P2_DIVIDE_BY_4) - clock.p2 = 4; - else - clock.p2 = 2; - - i8xx_clock(48000, &clock); - } - - /* XXX: It would be nice to validate the clocks, but we can't reuse - * i830PllIsValid() because it relies on the xf86_config connector - * configuration being accurate, which it isn't necessarily. - */ - - return clock.dot; -} - -/** Returns the currently programmed mode of the given pipe. */ -struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev, - struct drm_crtc *crtc) -{ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - struct drm_display_mode *mode; - int htot; - int hsync; - int vtot; - int vsync; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (gma_power_begin(dev, false)) { - htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B); - hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B); - vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B); - vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B); - gma_power_end(dev); - } else { - htot = (pipe == 0) ? - dev_priv->saveHTOTAL_A : dev_priv->saveHTOTAL_B; - hsync = (pipe == 0) ? - dev_priv->saveHSYNC_A : dev_priv->saveHSYNC_B; - vtot = (pipe == 0) ? - dev_priv->saveVTOTAL_A : dev_priv->saveVTOTAL_B; - vsync = (pipe == 0) ? - dev_priv->saveVSYNC_A : dev_priv->saveVSYNC_B; - } - - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) - return NULL; - - mode->clock = psb_intel_crtc_clock_get(dev, crtc); - mode->hdisplay = (htot & 0xffff) + 1; - mode->htotal = ((htot & 0xffff0000) >> 16) + 1; - mode->hsync_start = (hsync & 0xffff) + 1; - mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; - mode->vdisplay = (vtot & 0xffff) + 1; - mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; - mode->vsync_start = (vsync & 0xffff) + 1; - mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - return mode; -} - -void psb_intel_crtc_destroy(struct drm_crtc *crtc) -{ - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct gtt_range *gt; - - /* Unpin the old GEM object */ - if (psb_intel_crtc->cursor_obj) { - gt = container_of(psb_intel_crtc->cursor_obj, - struct gtt_range, gem); - psb_gtt_unpin(gt); - drm_gem_object_unreference(psb_intel_crtc->cursor_obj); - psb_intel_crtc->cursor_obj = NULL; - } - kfree(psb_intel_crtc->crtc_state); - drm_crtc_cleanup(crtc); - kfree(psb_intel_crtc); -} - -const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { - .dpms = psb_intel_crtc_dpms, - .mode_fixup = psb_intel_crtc_mode_fixup, - .mode_set = psb_intel_crtc_mode_set, - .mode_set_base = psb_intel_pipe_set_base, - .prepare = psb_intel_crtc_prepare, - .commit = psb_intel_crtc_commit, -}; - -const struct drm_crtc_funcs psb_intel_crtc_funcs = { - .save = psb_intel_crtc_save, - .restore = psb_intel_crtc_restore, - .cursor_set = psb_intel_crtc_cursor_set, - .cursor_move = psb_intel_crtc_cursor_move, - .gamma_set = psb_intel_crtc_gamma_set, - .set_config = psb_crtc_set_config, - .destroy = psb_intel_crtc_destroy, -}; - -/* - * Set the default value of cursor control and base register - * to zero. This is a workaround for h/w defect on Oaktrail - */ -static void psb_intel_cursor_init(struct drm_device *dev, int pipe) -{ - u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR }; - u32 base[3] = { CURABASE, CURBBASE, CURCBASE }; - - REG_WRITE(control[pipe], 0); - REG_WRITE(base[pipe], 0); -} - -void psb_intel_crtc_init(struct drm_device *dev, int pipe, - struct psb_intel_mode_device *mode_dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_intel_crtc *psb_intel_crtc; - int i; - uint16_t *r_base, *g_base, *b_base; - - /* We allocate a extra array of drm_connector pointers - * for fbdev after the crtc */ - psb_intel_crtc = - kzalloc(sizeof(struct psb_intel_crtc) + - (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), - GFP_KERNEL); - if (psb_intel_crtc == NULL) - return; - - psb_intel_crtc->crtc_state = - kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL); - if (!psb_intel_crtc->crtc_state) { - dev_err(dev->dev, "Crtc state error: No memory\n"); - kfree(psb_intel_crtc); - return; - } - - /* Set the CRTC operations from the chip specific data */ - drm_crtc_init(dev, &psb_intel_crtc->base, dev_priv->ops->crtc_funcs); - - drm_mode_crtc_set_gamma_size(&psb_intel_crtc->base, 256); - psb_intel_crtc->pipe = pipe; - psb_intel_crtc->plane = pipe; - - r_base = psb_intel_crtc->base.gamma_store; - g_base = r_base + 256; - b_base = g_base + 256; - for (i = 0; i < 256; i++) { - psb_intel_crtc->lut_r[i] = i; - psb_intel_crtc->lut_g[i] = i; - psb_intel_crtc->lut_b[i] = i; - r_base[i] = i << 8; - g_base[i] = i << 8; - b_base[i] = i << 8; - - psb_intel_crtc->lut_adj[i] = 0; - } - - psb_intel_crtc->mode_dev = mode_dev; - psb_intel_crtc->cursor_addr = 0; - - drm_crtc_helper_add(&psb_intel_crtc->base, - dev_priv->ops->crtc_helper); - - /* Setup the array of drm_connector pointer array */ - psb_intel_crtc->mode_set.crtc = &psb_intel_crtc->base; - BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || - dev_priv->plane_to_crtc_mapping[psb_intel_crtc->plane] != NULL); - dev_priv->plane_to_crtc_mapping[psb_intel_crtc->plane] = - &psb_intel_crtc->base; - dev_priv->pipe_to_crtc_mapping[psb_intel_crtc->pipe] = - &psb_intel_crtc->base; - psb_intel_crtc->mode_set.connectors = - (struct drm_connector **) (psb_intel_crtc + 1); - psb_intel_crtc->mode_set.num_connectors = 0; - psb_intel_cursor_init(dev, pipe); -} - -int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_psb_get_pipe_from_crtc_id_arg *pipe_from_crtc_id = data; - struct drm_mode_object *drmmode_obj; - struct psb_intel_crtc *crtc; - - if (!dev_priv) { - dev_err(dev->dev, "called with no initialization\n"); - return -EINVAL; - } - - drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id, - DRM_MODE_OBJECT_CRTC); - - if (!drmmode_obj) { - dev_err(dev->dev, "no such CRTC id\n"); - return -EINVAL; - } - - crtc = to_psb_intel_crtc(obj_to_crtc(drmmode_obj)); - pipe_from_crtc_id->pipe = crtc->pipe; - - return 0; -} - -struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) -{ - struct drm_crtc *crtc = NULL; - - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - if (psb_intel_crtc->pipe == pipe) - break; - } - return crtc; -} - -int psb_intel_connector_clones(struct drm_device *dev, int type_mask) -{ - int index_mask = 0; - struct drm_connector *connector; - int entry = 0; - - list_for_each_entry(connector, &dev->mode_config.connector_list, - head) { - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - if (type_mask & (1 << psb_intel_output->type)) - index_mask |= (1 << entry); - entry++; - } - return index_mask; -} - - -void psb_intel_modeset_cleanup(struct drm_device *dev) -{ - drm_mode_config_cleanup(dev); -} - - -/* current intel driver doesn't take advantage of encoders - always give back the encoder for the connector -*/ -struct drm_encoder *psb_intel_best_encoder(struct drm_connector *connector) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - return &psb_intel_output->enc; -} - diff --git a/drivers/staging/gma500/psb_intel_display.h b/drivers/staging/gma500/psb_intel_display.h deleted file mode 100644 index 535b49a5e409..000000000000 --- a/drivers/staging/gma500/psb_intel_display.h +++ /dev/null @@ -1,28 +0,0 @@ -/* copyright (c) 2008, Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - */ - -#ifndef _INTEL_DISPLAY_H_ -#define _INTEL_DISPLAY_H_ - -bool psb_intel_pipe_has_type(struct drm_crtc *crtc, int type); -void psb_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, - u16 *green, u16 *blue, uint32_t type, uint32_t size); -void psb_intel_crtc_destroy(struct drm_crtc *crtc); - -#endif diff --git a/drivers/staging/gma500/psb_intel_drv.h b/drivers/staging/gma500/psb_intel_drv.h deleted file mode 100644 index 36b554b5c335..000000000000 --- a/drivers/staging/gma500/psb_intel_drv.h +++ /dev/null @@ -1,230 +0,0 @@ -/* - * Copyright (c) 2009-2011, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ - -#ifndef __INTEL_DRV_H__ -#define __INTEL_DRV_H__ - -#include -#include -#include -#include -#include - -/* - * Display related stuff - */ - -/* store information about an Ixxx DVO */ -/* The i830->i865 use multiple DVOs with multiple i2cs */ -/* the i915, i945 have a single sDVO i2c bus - which is different */ -#define MAX_OUTPUTS 6 -/* maximum connectors per crtcs in the mode set */ -#define INTELFB_CONN_LIMIT 4 - -#define INTEL_I2C_BUS_DVO 1 -#define INTEL_I2C_BUS_SDVO 2 - -/* these are outputs from the chip - integrated only - * external chips are via DVO or SDVO output */ -#define INTEL_OUTPUT_UNUSED 0 -#define INTEL_OUTPUT_ANALOG 1 -#define INTEL_OUTPUT_DVO 2 -#define INTEL_OUTPUT_SDVO 3 -#define INTEL_OUTPUT_LVDS 4 -#define INTEL_OUTPUT_TVOUT 5 -#define INTEL_OUTPUT_HDMI 6 -#define INTEL_OUTPUT_MIPI 7 -#define INTEL_OUTPUT_MIPI2 8 - -#define INTEL_DVO_CHIP_NONE 0 -#define INTEL_DVO_CHIP_LVDS 1 -#define INTEL_DVO_CHIP_TMDS 2 -#define INTEL_DVO_CHIP_TVOUT 4 - -/* - * Hold information useally put on the device driver privates here, - * since it needs to be shared across multiple of devices drivers privates. - */ -struct psb_intel_mode_device { - - /* - * Abstracted memory manager operations - */ - size_t(*bo_offset) (struct drm_device *dev, void *bo); - - /* - * Cursor (Can go ?) - */ - int cursor_needs_physical; - - /* - * LVDS info - */ - int backlight_duty_cycle; /* restore backlight to this value */ - bool panel_wants_dither; - struct drm_display_mode *panel_fixed_mode; - struct drm_display_mode *panel_fixed_mode2; - struct drm_display_mode *vbt_mode; /* if any */ - - uint32_t saveBLC_PWM_CTL; -}; - -struct psb_intel_i2c_chan { - /* for getting at dev. private (mmio etc.) */ - struct drm_device *drm_dev; - u32 reg; /* GPIO reg */ - struct i2c_adapter adapter; - struct i2c_algo_bit_data algo; - u8 slave_addr; -}; - -struct psb_intel_output { - struct drm_connector base; - - struct drm_encoder enc; - int type; - - struct psb_intel_i2c_chan *i2c_bus; /* for control functions */ - struct psb_intel_i2c_chan *ddc_bus; /* for DDC only stuff */ - bool load_detect_temp; - void *dev_priv; - - struct psb_intel_mode_device *mode_dev; - struct i2c_adapter *hdmi_i2c_adapter; /* for control functions */ -}; - -struct psb_intel_crtc_state { - uint32_t saveDSPCNTR; - uint32_t savePIPECONF; - uint32_t savePIPESRC; - uint32_t saveDPLL; - uint32_t saveFP0; - uint32_t saveFP1; - uint32_t saveHTOTAL; - uint32_t saveHBLANK; - uint32_t saveHSYNC; - uint32_t saveVTOTAL; - uint32_t saveVBLANK; - uint32_t saveVSYNC; - uint32_t saveDSPSTRIDE; - uint32_t saveDSPSIZE; - uint32_t saveDSPPOS; - uint32_t saveDSPBASE; - uint32_t savePalette[256]; -}; - -struct psb_intel_crtc { - struct drm_crtc base; - int pipe; - int plane; - uint32_t cursor_addr; - u8 lut_r[256], lut_g[256], lut_b[256]; - u8 lut_adj[256]; - struct psb_intel_framebuffer *fbdev_fb; - /* a mode_set for fbdev users on this crtc */ - struct drm_mode_set mode_set; - - /* GEM object that holds our cursor */ - struct drm_gem_object *cursor_obj; - - struct drm_display_mode saved_mode; - struct drm_display_mode saved_adjusted_mode; - - struct psb_intel_mode_device *mode_dev; - - /*crtc mode setting flags*/ - u32 mode_flags; - - /* Saved Crtc HW states */ - struct psb_intel_crtc_state *crtc_state; -}; - -#define to_psb_intel_crtc(x) \ - container_of(x, struct psb_intel_crtc, base) -#define to_psb_intel_output(x) \ - container_of(x, struct psb_intel_output, base) -#define enc_to_psb_intel_output(x) \ - container_of(x, struct psb_intel_output, enc) -#define to_psb_intel_framebuffer(x) \ - container_of(x, struct psb_intel_framebuffer, base) - -struct psb_intel_i2c_chan *psb_intel_i2c_create(struct drm_device *dev, - const u32 reg, const char *name); -void psb_intel_i2c_destroy(struct psb_intel_i2c_chan *chan); -int psb_intel_ddc_get_modes(struct psb_intel_output *psb_intel_output); -extern bool psb_intel_ddc_probe(struct psb_intel_output *psb_intel_output); - -extern void psb_intel_crtc_init(struct drm_device *dev, int pipe, - struct psb_intel_mode_device *mode_dev); -extern void psb_intel_crt_init(struct drm_device *dev); -extern void psb_intel_sdvo_init(struct drm_device *dev, int output_device); -extern void psb_intel_dvo_init(struct drm_device *dev); -extern void psb_intel_tv_init(struct drm_device *dev); -extern void psb_intel_lvds_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev); -extern void psb_intel_lvds_set_brightness(struct drm_device *dev, int level); -extern void mrst_lvds_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev); -extern void mrst_wait_for_INTR_PKT_SENT(struct drm_device *dev); -extern void mrst_dsi_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev); -extern void mid_dsi_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev, int dsi_num); - -extern void psb_intel_crtc_load_lut(struct drm_crtc *crtc); -extern void psb_intel_encoder_prepare(struct drm_encoder *encoder); -extern void psb_intel_encoder_commit(struct drm_encoder *encoder); - -extern struct drm_encoder *psb_intel_best_encoder(struct drm_connector - *connector); - -extern struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev, - struct drm_crtc *crtc); -extern void psb_intel_wait_for_vblank(struct drm_device *dev); -extern int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, - struct drm_file *file_priv); -extern struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, - int pipe); -extern struct drm_connector *psb_intel_sdvo_find(struct drm_device *dev, - int sdvoB); -extern int psb_intel_sdvo_supports_hotplug(struct drm_connector *connector); -extern void psb_intel_sdvo_set_hotplug(struct drm_connector *connector, - int enable); -extern int intelfb_probe(struct drm_device *dev); -extern int intelfb_remove(struct drm_device *dev, - struct drm_framebuffer *fb); -extern struct drm_framebuffer *psb_intel_framebuffer_create(struct drm_device - *dev, struct - drm_mode_fb_cmd - *mode_cmd, - void *mm_private); -extern bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode); -extern int psb_intel_lvds_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode); -extern int psb_intel_lvds_set_property(struct drm_connector *connector, - struct drm_property *property, - uint64_t value); -extern void psb_intel_lvds_destroy(struct drm_connector *connector); -extern const struct drm_encoder_funcs psb_intel_lvds_enc_funcs; - -extern void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe); -extern void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe); - -#endif /* __INTEL_DRV_H__ */ diff --git a/drivers/staging/gma500/psb_intel_lvds.c b/drivers/staging/gma500/psb_intel_lvds.c deleted file mode 100644 index 21022e1a977a..000000000000 --- a/drivers/staging/gma500/psb_intel_lvds.c +++ /dev/null @@ -1,854 +0,0 @@ -/* - * Copyright © 2006-2007 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - * Dave Airlie - * Jesse Barnes - */ - -#include -#include - -#include "intel_bios.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "power.h" -#include - -/* - * LVDS I2C backlight control macros - */ -#define BRIGHTNESS_MAX_LEVEL 100 -#define BRIGHTNESS_MASK 0xFF -#define BLC_I2C_TYPE 0x01 -#define BLC_PWM_TYPT 0x02 - -#define BLC_POLARITY_NORMAL 0 -#define BLC_POLARITY_INVERSE 1 - -#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE) -#define PSB_BLC_MIN_PWM_REG_FREQ (0x2) -#define PSB_BLC_PWM_PRECISION_FACTOR (10) -#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) -#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) - -struct psb_intel_lvds_priv { - /* - * Saved LVDO output states - */ - uint32_t savePP_ON; - uint32_t savePP_OFF; - uint32_t saveLVDS; - uint32_t savePP_CONTROL; - uint32_t savePP_CYCLE; - uint32_t savePFIT_CONTROL; - uint32_t savePFIT_PGM_RATIOS; - uint32_t saveBLC_PWM_CTL; -}; - - -/* - * Returns the maximum level of the backlight duty cycle field. - */ -static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 ret; - - if (gma_power_begin(dev, false)) { - ret = REG_READ(BLC_PWM_CTL); - gma_power_end(dev); - } else /* Powered off, use the saved value */ - ret = dev_priv->saveBLC_PWM_CTL; - - /* Top 15bits hold the frequency mask */ - ret = (ret & BACKLIGHT_MODULATION_FREQ_MASK) >> - BACKLIGHT_MODULATION_FREQ_SHIFT; - - ret *= 2; /* Return a 16bit range as needed for setting */ - if (ret == 0) - dev_err(dev->dev, "BL bug: Reg %08x save %08X\n", - REG_READ(BLC_PWM_CTL), dev_priv->saveBLC_PWM_CTL); - return ret; -} - -/* - * Set LVDS backlight level by I2C command - * - * FIXME: at some point we need to both track this for PM and also - * disable runtime pm on MRST if the brightness is nil (ie blanked) - */ -static int psb_lvds_i2c_set_brightness(struct drm_device *dev, - unsigned int level) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *)dev->dev_private; - - struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus; - u8 out_buf[2]; - unsigned int blc_i2c_brightness; - - struct i2c_msg msgs[] = { - { - .addr = lvds_i2c_bus->slave_addr, - .flags = 0, - .len = 2, - .buf = out_buf, - } - }; - - blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level * - BRIGHTNESS_MASK / - BRIGHTNESS_MAX_LEVEL); - - if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) - blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness; - - out_buf[0] = dev_priv->lvds_bl->brightnesscmd; - out_buf[1] = (u8)blc_i2c_brightness; - - if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1) { - dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n", - dev_priv->lvds_bl->brightnesscmd, - blc_i2c_brightness); - return 0; - } - - dev_err(dev->dev, "I2C transfer error\n"); - return -1; -} - - -static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *)dev->dev_private; - - u32 max_pwm_blc; - u32 blc_pwm_duty_cycle; - - max_pwm_blc = psb_intel_lvds_get_max_backlight(dev); - - /*BLC_PWM_CTL Should be initiated while backlight device init*/ - BUG_ON(max_pwm_blc == 0); - - blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL; - - if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) - blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle; - - blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR; - REG_WRITE(BLC_PWM_CTL, - (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | - (blc_pwm_duty_cycle)); - - dev_info(dev->dev, "Backlight lvds set brightness %08x\n", - (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | - (blc_pwm_duty_cycle)); - - return 0; -} - -/* - * Set LVDS backlight level either by I2C or PWM - */ -void psb_intel_lvds_set_brightness(struct drm_device *dev, int level) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - dev_dbg(dev->dev, "backlight level is %d\n", level); - - if (!dev_priv->lvds_bl) { - dev_err(dev->dev, "NO LVDS backlight info\n"); - return; - } - - if (dev_priv->lvds_bl->type == BLC_I2C_TYPE) - psb_lvds_i2c_set_brightness(dev, level); - else - psb_lvds_pwm_set_brightness(dev, level); -} - -/* - * Sets the backlight level. - * - * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight(). - */ -static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 blc_pwm_ctl; - - if (gma_power_begin(dev, false)) { - blc_pwm_ctl = REG_READ(BLC_PWM_CTL); - blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK; - REG_WRITE(BLC_PWM_CTL, - (blc_pwm_ctl | - (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); - dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl | - (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); - gma_power_end(dev); - } else { - blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL & - ~BACKLIGHT_DUTY_CYCLE_MASK; - dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl | - (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); - } -} - -/* - * Sets the power state for the panel. - */ -static void psb_intel_lvds_set_power(struct drm_device *dev, - struct psb_intel_output *output, bool on) -{ - u32 pp_status; - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "set power, chip off!\n"); - return; - } - - if (on) { - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | - POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while ((pp_status & PP_ON) == 0); - - psb_intel_lvds_set_backlight(dev, - output-> - mode_dev->backlight_duty_cycle); - } else { - psb_intel_lvds_set_backlight(dev, 0); - - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & - ~POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while (pp_status & PP_ON); - } - - gma_power_end(dev); -} - -static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - - if (mode == DRM_MODE_DPMS_ON) - psb_intel_lvds_set_power(dev, output, true); - else - psb_intel_lvds_set_power(dev, output, false); - - /* XXX: We never power down the LVDS pairs. */ -} - -static void psb_intel_lvds_save(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct drm_psb_private *dev_priv = - (struct drm_psb_private *)dev->dev_private; - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct psb_intel_lvds_priv *lvds_priv = - (struct psb_intel_lvds_priv *)psb_intel_output->dev_priv; - - lvds_priv->savePP_ON = REG_READ(LVDSPP_ON); - lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF); - lvds_priv->saveLVDS = REG_READ(LVDS); - lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL); - lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE); - /*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/ - lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); - lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL); - lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS); - - /*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/ - dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & - BACKLIGHT_DUTY_CYCLE_MASK); - - /* - * If the light is off at server startup, - * just make it full brightness - */ - if (dev_priv->backlight_duty_cycle == 0) - dev_priv->backlight_duty_cycle = - psb_intel_lvds_get_max_backlight(dev); - - dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n", - lvds_priv->savePP_ON, - lvds_priv->savePP_OFF, - lvds_priv->saveLVDS, - lvds_priv->savePP_CONTROL, - lvds_priv->savePP_CYCLE, - lvds_priv->saveBLC_PWM_CTL); -} - -static void psb_intel_lvds_restore(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - u32 pp_status; - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct psb_intel_lvds_priv *lvds_priv = - (struct psb_intel_lvds_priv *)psb_intel_output->dev_priv; - - dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n", - lvds_priv->savePP_ON, - lvds_priv->savePP_OFF, - lvds_priv->saveLVDS, - lvds_priv->savePP_CONTROL, - lvds_priv->savePP_CYCLE, - lvds_priv->saveBLC_PWM_CTL); - - REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL); - REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL); - REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS); - REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON); - REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF); - /*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/ - REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE); - REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL); - REG_WRITE(LVDS, lvds_priv->saveLVDS); - - if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) { - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | - POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while ((pp_status & PP_ON) == 0); - } else { - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & - ~POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while (pp_status & PP_ON); - } -} - -int psb_intel_lvds_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct drm_display_mode *fixed_mode = - psb_intel_output->mode_dev->panel_fixed_mode; - - if (psb_intel_output->type == INTEL_OUTPUT_MIPI2) - fixed_mode = psb_intel_output->mode_dev->panel_fixed_mode2; - - /* just in case */ - if (mode->flags & DRM_MODE_FLAG_DBLSCAN) - return MODE_NO_DBLESCAN; - - /* just in case */ - if (mode->flags & DRM_MODE_FLAG_INTERLACE) - return MODE_NO_INTERLACE; - - if (fixed_mode) { - if (mode->hdisplay > fixed_mode->hdisplay) - return MODE_PANEL; - if (mode->vdisplay > fixed_mode->vdisplay) - return MODE_PANEL; - } - return MODE_OK; -} - -bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct psb_intel_mode_device *mode_dev = - enc_to_psb_intel_output(encoder)->mode_dev; - struct drm_device *dev = encoder->dev; - struct psb_intel_crtc *psb_intel_crtc = - to_psb_intel_crtc(encoder->crtc); - struct drm_encoder *tmp_encoder; - struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode; - struct psb_intel_output *psb_intel_output = - enc_to_psb_intel_output(encoder); - - if (psb_intel_output->type == INTEL_OUTPUT_MIPI2) - panel_fixed_mode = mode_dev->panel_fixed_mode2; - - /* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */ - if (!IS_MRST(dev) && psb_intel_crtc->pipe == 0) { - printk(KERN_ERR "Can't support LVDS on pipe A\n"); - return false; - } - if (IS_MRST(dev) && psb_intel_crtc->pipe != 0) { - printk(KERN_ERR "Must use PIPE A\n"); - return false; - } - /* Should never happen!! */ - list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, - head) { - if (tmp_encoder != encoder - && tmp_encoder->crtc == encoder->crtc) { - printk(KERN_ERR "Can't enable LVDS and another " - "encoder on the same pipe\n"); - return false; - } - } - - /* - * If we have timings from the BIOS for the panel, put them in - * to the adjusted mode. The CRTC will be set up for this mode, - * with the panel scaling set up to source from the H/VDisplay - * of the original mode. - */ - if (panel_fixed_mode != NULL) { - adjusted_mode->hdisplay = panel_fixed_mode->hdisplay; - adjusted_mode->hsync_start = panel_fixed_mode->hsync_start; - adjusted_mode->hsync_end = panel_fixed_mode->hsync_end; - adjusted_mode->htotal = panel_fixed_mode->htotal; - adjusted_mode->vdisplay = panel_fixed_mode->vdisplay; - adjusted_mode->vsync_start = panel_fixed_mode->vsync_start; - adjusted_mode->vsync_end = panel_fixed_mode->vsync_end; - adjusted_mode->vtotal = panel_fixed_mode->vtotal; - adjusted_mode->clock = panel_fixed_mode->clock; - drm_mode_set_crtcinfo(adjusted_mode, - CRTC_INTERLACE_HALVE_V); - } - - /* - * XXX: It would be nice to support lower refresh rates on the - * panels to reduce power consumption, and perhaps match the - * user's requested refresh rate. - */ - - return true; -} - -static void psb_intel_lvds_prepare(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct psb_intel_mode_device *mode_dev = output->mode_dev; - - if (!gma_power_begin(dev, true)) - return; - - mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); - mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & - BACKLIGHT_DUTY_CYCLE_MASK); - - psb_intel_lvds_set_power(dev, output, false); - - gma_power_end(dev); -} - -static void psb_intel_lvds_commit(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct psb_intel_mode_device *mode_dev = output->mode_dev; - - if (mode_dev->backlight_duty_cycle == 0) - mode_dev->backlight_duty_cycle = - psb_intel_lvds_get_max_backlight(dev); - - psb_intel_lvds_set_power(dev, output, true); -} - -static void psb_intel_lvds_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 pfit_control; - - /* - * The LVDS pin pair will already have been turned on in the - * psb_intel_crtc_mode_set since it has a large impact on the DPLL - * settings. - */ - - /* - * Enable automatic panel scaling so that non-native modes fill the - * screen. Should be enabled before the pipe is enabled, according to - * register description and PRM. - */ - if (mode->hdisplay != adjusted_mode->hdisplay || - mode->vdisplay != adjusted_mode->vdisplay) - pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | - HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | - HORIZ_INTERP_BILINEAR); - else - pfit_control = 0; - - if (dev_priv->lvds_dither) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - - REG_WRITE(PFIT_CONTROL, pfit_control); -} - -/* - * Detect the LVDS connection. - * - * This always returns CONNECTOR_STATUS_CONNECTED. - * This connector should only have - * been set up if the LVDS was actually connected anyway. - */ -static enum drm_connector_status psb_intel_lvds_detect(struct drm_connector - *connector, bool force) -{ - return connector_status_connected; -} - -/* - * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. - */ -static int psb_intel_lvds_get_modes(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct psb_intel_mode_device *mode_dev = - psb_intel_output->mode_dev; - int ret = 0; - - if (!IS_MRST(dev)) - ret = psb_intel_ddc_get_modes(psb_intel_output); - - if (ret) - return ret; - - /* Didn't get an EDID, so - * Set wide sync ranges so we get all modes - * handed to valid_mode for checking - */ - connector->display_info.min_vfreq = 0; - connector->display_info.max_vfreq = 200; - connector->display_info.min_hfreq = 0; - connector->display_info.max_hfreq = 200; - - if (mode_dev->panel_fixed_mode != NULL) { - struct drm_display_mode *mode = - drm_mode_duplicate(dev, mode_dev->panel_fixed_mode); - drm_mode_probed_add(connector, mode); - return 1; - } - - return 0; -} - -/** - * psb_intel_lvds_destroy - unregister and free LVDS structures - * @connector: connector to free - * - * Unregister the DDC bus for this connector then free the driver private - * structure. - */ -void psb_intel_lvds_destroy(struct drm_connector *connector) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - if (psb_intel_output->ddc_bus) - psb_intel_i2c_destroy(psb_intel_output->ddc_bus); - drm_sysfs_connector_remove(connector); - drm_connector_cleanup(connector); - kfree(connector); -} - -int psb_intel_lvds_set_property(struct drm_connector *connector, - struct drm_property *property, - uint64_t value) -{ - struct drm_encoder *encoder = connector->encoder; - - if (!encoder) - return -1; - - if (!strcmp(property->name, "scaling mode")) { - struct psb_intel_crtc *crtc = - to_psb_intel_crtc(encoder->crtc); - uint64_t curval; - - if (!crtc) - goto set_prop_error; - - switch (value) { - case DRM_MODE_SCALE_FULLSCREEN: - break; - case DRM_MODE_SCALE_NO_SCALE: - break; - case DRM_MODE_SCALE_ASPECT: - break; - default: - goto set_prop_error; - } - - if (drm_connector_property_get_value(connector, - property, - &curval)) - goto set_prop_error; - - if (curval == value) - goto set_prop_done; - - if (drm_connector_property_set_value(connector, - property, - value)) - goto set_prop_error; - - if (crtc->saved_mode.hdisplay != 0 && - crtc->saved_mode.vdisplay != 0) { - if (!drm_crtc_helper_set_mode(encoder->crtc, - &crtc->saved_mode, - encoder->crtc->x, - encoder->crtc->y, - encoder->crtc->fb)) - goto set_prop_error; - } - } else if (!strcmp(property->name, "backlight")) { - if (drm_connector_property_set_value(connector, - property, - value)) - goto set_prop_error; - else { -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - struct drm_psb_private *devp = - encoder->dev->dev_private; - struct backlight_device *bd = devp->backlight_device; - if (bd) { - bd->props.brightness = value; - backlight_update_status(bd); - } -#endif - } - } else if (!strcmp(property->name, "DPMS")) { - struct drm_encoder_helper_funcs *hfuncs - = encoder->helper_private; - hfuncs->dpms(encoder, value); - } - -set_prop_done: - return 0; -set_prop_error: - return -1; -} - -static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = { - .dpms = psb_intel_lvds_encoder_dpms, - .mode_fixup = psb_intel_lvds_mode_fixup, - .prepare = psb_intel_lvds_prepare, - .mode_set = psb_intel_lvds_mode_set, - .commit = psb_intel_lvds_commit, -}; - -const struct drm_connector_helper_funcs - psb_intel_lvds_connector_helper_funcs = { - .get_modes = psb_intel_lvds_get_modes, - .mode_valid = psb_intel_lvds_mode_valid, - .best_encoder = psb_intel_best_encoder, -}; - -const struct drm_connector_funcs psb_intel_lvds_connector_funcs = { - .dpms = drm_helper_connector_dpms, - .save = psb_intel_lvds_save, - .restore = psb_intel_lvds_restore, - .detect = psb_intel_lvds_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .set_property = psb_intel_lvds_set_property, - .destroy = psb_intel_lvds_destroy, -}; - - -static void psb_intel_lvds_enc_destroy(struct drm_encoder *encoder) -{ - drm_encoder_cleanup(encoder); -} - -const struct drm_encoder_funcs psb_intel_lvds_enc_funcs = { - .destroy = psb_intel_lvds_enc_destroy, -}; - - - -/** - * psb_intel_lvds_init - setup LVDS connectors on this device - * @dev: drm device - * - * Create the connector, register the LVDS DDC bus, and try to figure out what - * modes we can display on the LVDS panel (if present). - */ -void psb_intel_lvds_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev) -{ - struct psb_intel_output *psb_intel_output; - struct psb_intel_lvds_priv *lvds_priv; - struct drm_connector *connector; - struct drm_encoder *encoder; - struct drm_display_mode *scan; /* *modes, *bios_mode; */ - struct drm_crtc *crtc; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 lvds; - int pipe; - - psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL); - if (!psb_intel_output) - return; - - lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL); - if (!lvds_priv) { - kfree(psb_intel_output); - dev_err(dev->dev, "LVDS private allocation error\n"); - return; - } - - psb_intel_output->dev_priv = lvds_priv; - psb_intel_output->mode_dev = mode_dev; - - connector = &psb_intel_output->base; - encoder = &psb_intel_output->enc; - drm_connector_init(dev, &psb_intel_output->base, - &psb_intel_lvds_connector_funcs, - DRM_MODE_CONNECTOR_LVDS); - - drm_encoder_init(dev, &psb_intel_output->enc, - &psb_intel_lvds_enc_funcs, - DRM_MODE_ENCODER_LVDS); - - drm_mode_connector_attach_encoder(&psb_intel_output->base, - &psb_intel_output->enc); - psb_intel_output->type = INTEL_OUTPUT_LVDS; - - drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs); - drm_connector_helper_add(connector, - &psb_intel_lvds_connector_helper_funcs); - connector->display_info.subpixel_order = SubPixelHorizontalRGB; - connector->interlace_allowed = false; - connector->doublescan_allowed = false; - - /*Attach connector properties*/ - drm_connector_attach_property(connector, - dev->mode_config.scaling_mode_property, - DRM_MODE_SCALE_FULLSCREEN); - drm_connector_attach_property(connector, - dev_priv->backlight_property, - BRIGHTNESS_MAX_LEVEL); - - /* - * Set up I2C bus - * FIXME: distroy i2c_bus when exit - */ - psb_intel_output->i2c_bus = psb_intel_i2c_create(dev, - GPIOB, - "LVDSBLC_B"); - if (!psb_intel_output->i2c_bus) { - dev_printk(KERN_ERR, - &dev->pdev->dev, "I2C bus registration failed.\n"); - goto failed_blc_i2c; - } - psb_intel_output->i2c_bus->slave_addr = 0x2C; - dev_priv->lvds_i2c_bus = psb_intel_output->i2c_bus; - - /* - * LVDS discovery: - * 1) check for EDID on DDC - * 2) check for VBT data - * 3) check to see if LVDS is already on - * if none of the above, no panel - * 4) make sure lid is open - * if closed, act like it's not there for now - */ - - /* Set up the DDC bus. */ - psb_intel_output->ddc_bus = psb_intel_i2c_create(dev, - GPIOC, - "LVDSDDC_C"); - if (!psb_intel_output->ddc_bus) { - dev_printk(KERN_ERR, &dev->pdev->dev, - "DDC bus registration " "failed.\n"); - goto failed_ddc; - } - - /* - * Attempt to get the fixed panel mode from DDC. Assume that the - * preferred mode is the right one. - */ - psb_intel_ddc_get_modes(psb_intel_output); - list_for_each_entry(scan, &connector->probed_modes, head) { - if (scan->type & DRM_MODE_TYPE_PREFERRED) { - mode_dev->panel_fixed_mode = - drm_mode_duplicate(dev, scan); - goto out; /* FIXME: check for quirks */ - } - } - - /* Failed to get EDID, what about VBT? do we need this? */ - if (mode_dev->vbt_mode) - mode_dev->panel_fixed_mode = - drm_mode_duplicate(dev, mode_dev->vbt_mode); - - if (!mode_dev->panel_fixed_mode) - if (dev_priv->lfp_lvds_vbt_mode) - mode_dev->panel_fixed_mode = - drm_mode_duplicate(dev, - dev_priv->lfp_lvds_vbt_mode); - - /* - * If we didn't get EDID, try checking if the panel is already turned - * on. If so, assume that whatever is currently programmed is the - * correct mode. - */ - lvds = REG_READ(LVDS); - pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; - crtc = psb_intel_get_crtc_from_pipe(dev, pipe); - - if (crtc && (lvds & LVDS_PORT_EN)) { - mode_dev->panel_fixed_mode = - psb_intel_crtc_mode_get(dev, crtc); - if (mode_dev->panel_fixed_mode) { - mode_dev->panel_fixed_mode->type |= - DRM_MODE_TYPE_PREFERRED; - goto out; /* FIXME: check for quirks */ - } - } - - /* If we still don't have a mode after all that, give up. */ - if (!mode_dev->panel_fixed_mode) { - dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); - goto failed_find; - } - - /* - * Blacklist machines with BIOSes that list an LVDS panel without - * actually having one. - */ -out: - drm_sysfs_connector_add(connector); - return; - -failed_find: - if (psb_intel_output->ddc_bus) - psb_intel_i2c_destroy(psb_intel_output->ddc_bus); -failed_ddc: - if (psb_intel_output->i2c_bus) - psb_intel_i2c_destroy(psb_intel_output->i2c_bus); -failed_blc_i2c: - drm_encoder_cleanup(encoder); - drm_connector_cleanup(connector); - kfree(connector); -} - diff --git a/drivers/staging/gma500/psb_intel_modes.c b/drivers/staging/gma500/psb_intel_modes.c deleted file mode 100644 index bde1aff96190..000000000000 --- a/drivers/staging/gma500/psb_intel_modes.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (c) 2007 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authers: Jesse Barnes - */ - -#include -#include -#include -#include "psb_intel_drv.h" - -/** - * psb_intel_ddc_probe - * - */ -bool psb_intel_ddc_probe(struct psb_intel_output *psb_intel_output) -{ - u8 out_buf[] = { 0x0, 0x0 }; - u8 buf[2]; - int ret; - struct i2c_msg msgs[] = { - { - .addr = 0x50, - .flags = 0, - .len = 1, - .buf = out_buf, - }, - { - .addr = 0x50, - .flags = I2C_M_RD, - .len = 1, - .buf = buf, - } - }; - - ret = i2c_transfer(&psb_intel_output->ddc_bus->adapter, msgs, 2); - if (ret == 2) - return true; - - return false; -} - -/** - * psb_intel_ddc_get_modes - get modelist from monitor - * @connector: DRM connector device to use - * - * Fetch the EDID information from @connector using the DDC bus. - */ -int psb_intel_ddc_get_modes(struct psb_intel_output *psb_intel_output) -{ - struct edid *edid; - int ret = 0; - - edid = - drm_get_edid(&psb_intel_output->base, - &psb_intel_output->ddc_bus->adapter); - if (edid) { - drm_mode_connector_update_edid_property(&psb_intel_output-> - base, edid); - ret = drm_add_edid_modes(&psb_intel_output->base, edid); - kfree(edid); - } - return ret; -} diff --git a/drivers/staging/gma500/psb_intel_reg.h b/drivers/staging/gma500/psb_intel_reg.h deleted file mode 100644 index 1ac16aa791c9..000000000000 --- a/drivers/staging/gma500/psb_intel_reg.h +++ /dev/null @@ -1,1235 +0,0 @@ -/* - * Copyright (c) 2009, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ -#ifndef __PSB_INTEL_REG_H__ -#define __PSB_INTEL_REG_H__ - -#define BLC_PWM_CTL 0x61254 -#define BLC_PWM_CTL2 0x61250 -#define BLC_PWM_CTL_C 0x62254 -#define BLC_PWM_CTL2_C 0x62250 -#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) -/* - * This is the most significant 15 bits of the number of backlight cycles in a - * complete cycle of the modulated backlight control. - * - * The actual value is this field multiplied by two. - */ -#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) -#define BLM_LEGACY_MODE (1 << 16) -/* - * This is the number of cycles out of the backlight modulation cycle for which - * the backlight is on. - * - * This field must be no greater than the number of cycles in the complete - * backlight modulation cycle. - */ -#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) -#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) - -#define I915_GCFGC 0xf0 -#define I915_LOW_FREQUENCY_ENABLE (1 << 7) -#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) -#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) -#define I915_DISPLAY_CLOCK_MASK (7 << 4) - -#define I855_HPLLCC 0xc0 -#define I855_CLOCK_CONTROL_MASK (3 << 0) -#define I855_CLOCK_133_200 (0 << 0) -#define I855_CLOCK_100_200 (1 << 0) -#define I855_CLOCK_100_133 (2 << 0) -#define I855_CLOCK_166_250 (3 << 0) - -/* I830 CRTC registers */ -#define HTOTAL_A 0x60000 -#define HBLANK_A 0x60004 -#define HSYNC_A 0x60008 -#define VTOTAL_A 0x6000c -#define VBLANK_A 0x60010 -#define VSYNC_A 0x60014 -#define PIPEASRC 0x6001c -#define BCLRPAT_A 0x60020 -#define VSYNCSHIFT_A 0x60028 - -#define HTOTAL_B 0x61000 -#define HBLANK_B 0x61004 -#define HSYNC_B 0x61008 -#define VTOTAL_B 0x6100c -#define VBLANK_B 0x61010 -#define VSYNC_B 0x61014 -#define PIPEBSRC 0x6101c -#define BCLRPAT_B 0x61020 -#define VSYNCSHIFT_B 0x61028 - -#define HTOTAL_C 0x62000 -#define HBLANK_C 0x62004 -#define HSYNC_C 0x62008 -#define VTOTAL_C 0x6200c -#define VBLANK_C 0x62010 -#define VSYNC_C 0x62014 -#define PIPECSRC 0x6201c -#define BCLRPAT_C 0x62020 -#define VSYNCSHIFT_C 0x62028 - -#define PP_STATUS 0x61200 -# define PP_ON (1 << 31) -/* - * Indicates that all dependencies of the panel are on: - * - * - PLL enabled - * - pipe enabled - * - LVDS/DVOB/DVOC on - */ -#define PP_READY (1 << 30) -#define PP_SEQUENCE_NONE (0 << 28) -#define PP_SEQUENCE_ON (1 << 28) -#define PP_SEQUENCE_OFF (2 << 28) -#define PP_SEQUENCE_MASK 0x30000000 -#define PP_CONTROL 0x61204 -#define POWER_TARGET_ON (1 << 0) - -#define LVDSPP_ON 0x61208 -#define LVDSPP_OFF 0x6120c -#define PP_CYCLE 0x61210 - -#define PFIT_CONTROL 0x61230 -#define PFIT_ENABLE (1 << 31) -#define PFIT_PIPE_MASK (3 << 29) -#define PFIT_PIPE_SHIFT 29 -#define PFIT_SCALING_MODE_PILLARBOX (1 << 27) -#define PFIT_SCALING_MODE_LETTERBOX (3 << 26) -#define VERT_INTERP_DISABLE (0 << 10) -#define VERT_INTERP_BILINEAR (1 << 10) -#define VERT_INTERP_MASK (3 << 10) -#define VERT_AUTO_SCALE (1 << 9) -#define HORIZ_INTERP_DISABLE (0 << 6) -#define HORIZ_INTERP_BILINEAR (1 << 6) -#define HORIZ_INTERP_MASK (3 << 6) -#define HORIZ_AUTO_SCALE (1 << 5) -#define PANEL_8TO6_DITHER_ENABLE (1 << 3) - -#define PFIT_PGM_RATIOS 0x61234 -#define PFIT_VERT_SCALE_MASK 0xfff00000 -#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 - -#define PFIT_AUTO_RATIOS 0x61238 - -#define DPLL_A 0x06014 -#define DPLL_B 0x06018 -#define DPLL_VCO_ENABLE (1 << 31) -#define DPLL_DVO_HIGH_SPEED (1 << 30) -#define DPLL_SYNCLOCK_ENABLE (1 << 29) -#define DPLL_VGA_MODE_DIS (1 << 28) -#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ -#define DPLLB_MODE_LVDS (2 << 26) /* i915 */ -#define DPLL_MODE_MASK (3 << 26) -#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ -#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ -#define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ -#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ -#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ -#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ -#define DPLL_LOCK (1 << 15) /* CDV */ - -/* - * The i830 generation, in DAC/serial mode, defines p1 as two plus this - * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. - */ -# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 -/* - * The i830 generation, in LVDS mode, defines P1 as the bit number set within - * this field (only one bit may be set). - */ -#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 -#define DPLL_FPA01_P1_POST_DIV_SHIFT 16 -#define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required - * in DVO non-gang */ -# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ -#define PLL_REF_INPUT_DREFCLK (0 << 13) -#define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ -#define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO - * TVCLKIN */ -#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) -#define PLL_REF_INPUT_MASK (3 << 13) -#define PLL_LOAD_PULSE_PHASE_SHIFT 9 -/* - * Parallel to Serial Load Pulse phase selection. - * Selects the phase for the 10X DPLL clock for the PCIe - * digital display port. The range is 4 to 13; 10 or more - * is just a flip delay. The default is 6 - */ -#define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) -#define DISPLAY_RATE_SELECT_FPA1 (1 << 8) - -/* - * SDVO multiplier for 945G/GM. Not used on 965. - * - * DPLL_MD_UDI_MULTIPLIER_MASK - */ -#define SDVO_MULTIPLIER_MASK 0x000000ff -#define SDVO_MULTIPLIER_SHIFT_HIRES 4 -#define SDVO_MULTIPLIER_SHIFT_VGA 0 - -/* - * PLL_MD - */ -/* Pipe A SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_A_MD 0x0601c -/* Pipe B SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_B_MD 0x06020 -/* - * UDI pixel divider, controlling how many pixels are stuffed into a packet. - * - * Value is pixels minus 1. Must be set to 1 pixel for SDVO. - */ -#define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 -#define DPLL_MD_UDI_DIVIDER_SHIFT 24 -/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ -#define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 -#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 -/* - * SDVO/UDI pixel multiplier. - * - * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus - * clock rate is 10 times the DPLL clock. At low resolution/refresh rate - * modes, the bus rate would be below the limits, so SDVO allows for stuffing - * dummy bytes in the datastream at an increased clock rate, with both sides of - * the link knowing how many bytes are fill. - * - * So, for a mode with a dotclock of 65Mhz, we would want to double the clock - * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be - * set to 130Mhz, and the SDVO multiplier set to 2x in this register and - * through an SDVO command. - * - * This register field has values of multiplication factor minus 1, with - * a maximum multiplier of 5 for SDVO. - */ -#define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 -#define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 -/* - * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. - * This best be set to the default value (3) or the CRT won't work. No, - * I don't entirely understand what this does... - */ -#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f -#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 - -#define DPLL_TEST 0x606c -#define DPLLB_TEST_SDVO_DIV_1 (0 << 22) -#define DPLLB_TEST_SDVO_DIV_2 (1 << 22) -#define DPLLB_TEST_SDVO_DIV_4 (2 << 22) -#define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) -#define DPLLB_TEST_N_BYPASS (1 << 19) -#define DPLLB_TEST_M_BYPASS (1 << 18) -#define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) -#define DPLLA_TEST_N_BYPASS (1 << 3) -#define DPLLA_TEST_M_BYPASS (1 << 2) -#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) - -#define ADPA 0x61100 -#define ADPA_DAC_ENABLE (1 << 31) -#define ADPA_DAC_DISABLE 0 -#define ADPA_PIPE_SELECT_MASK (1 << 30) -#define ADPA_PIPE_A_SELECT 0 -#define ADPA_PIPE_B_SELECT (1 << 30) -#define ADPA_USE_VGA_HVPOLARITY (1 << 15) -#define ADPA_SETS_HVPOLARITY 0 -#define ADPA_VSYNC_CNTL_DISABLE (1 << 11) -#define ADPA_VSYNC_CNTL_ENABLE 0 -#define ADPA_HSYNC_CNTL_DISABLE (1 << 10) -#define ADPA_HSYNC_CNTL_ENABLE 0 -#define ADPA_VSYNC_ACTIVE_HIGH (1 << 4) -#define ADPA_VSYNC_ACTIVE_LOW 0 -#define ADPA_HSYNC_ACTIVE_HIGH (1 << 3) -#define ADPA_HSYNC_ACTIVE_LOW 0 - -#define FPA0 0x06040 -#define FPA1 0x06044 -#define FPB0 0x06048 -#define FPB1 0x0604c -#define FP_N_DIV_MASK 0x003f0000 -#define FP_N_DIV_SHIFT 16 -#define FP_M1_DIV_MASK 0x00003f00 -#define FP_M1_DIV_SHIFT 8 -#define FP_M2_DIV_MASK 0x0000003f -#define FP_M2_DIV_SHIFT 0 - -#define PORT_HOTPLUG_EN 0x61110 -#define SDVOB_HOTPLUG_INT_EN (1 << 26) -#define SDVOC_HOTPLUG_INT_EN (1 << 25) -#define TV_HOTPLUG_INT_EN (1 << 18) -#define CRT_HOTPLUG_INT_EN (1 << 9) -#define CRT_HOTPLUG_FORCE_DETECT (1 << 3) -/* CDV.. */ -#define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) -#define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) -#define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) -#define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) -#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) -#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) -#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) -#define CRT_HOTPLUG_DETECT_MASK 0x000000F8 - -#define PORT_HOTPLUG_STAT 0x61114 -#define CRT_HOTPLUG_INT_STATUS (1 << 11) -#define TV_HOTPLUG_INT_STATUS (1 << 10) -#define CRT_HOTPLUG_MONITOR_MASK (3 << 8) -#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) -#define CRT_HOTPLUG_MONITOR_MONO (2 << 8) -#define CRT_HOTPLUG_MONITOR_NONE (0 << 8) -#define SDVOC_HOTPLUG_INT_STATUS (1 << 7) -#define SDVOB_HOTPLUG_INT_STATUS (1 << 6) - -#define SDVOB 0x61140 -#define SDVOC 0x61160 -#define SDVO_ENABLE (1 << 31) -#define SDVO_PIPE_B_SELECT (1 << 30) -#define SDVO_STALL_SELECT (1 << 29) -#define SDVO_INTERRUPT_ENABLE (1 << 26) - -/** - * 915G/GM SDVO pixel multiplier. - * - * Programmed value is multiplier - 1, up to 5x. - * - * DPLL_MD_UDI_MULTIPLIER_MASK - */ -#define SDVO_PORT_MULTIPLY_MASK (7 << 23) -#define SDVO_PORT_MULTIPLY_SHIFT 23 -#define SDVO_PHASE_SELECT_MASK (15 << 19) -#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) -#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) -#define SDVOC_GANG_MODE (1 << 16) -#define SDVO_BORDER_ENABLE (1 << 7) -#define SDVOB_PCIE_CONCURRENCY (1 << 3) -#define SDVO_DETECTED (1 << 2) -/* Bits to be preserved when writing */ -#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) -#define SDVOC_PRESERVE_MASK (1 << 17) - -/* - * This register controls the LVDS output enable, pipe selection, and data - * format selection. - * - * All of the clock/data pairs are force powered down by power sequencing. - */ -#define LVDS 0x61180 -/* - * Enables the LVDS port. This bit must be set before DPLLs are enabled, as - * the DPLL semantics change when the LVDS is assigned to that pipe. - */ -#define LVDS_PORT_EN (1 << 31) -/* Selects pipe B for LVDS data. Must be set on pre-965. */ -#define LVDS_PIPEB_SELECT (1 << 30) - -/* Turns on border drawing to allow centered display. */ -#define LVDS_BORDER_EN (1 << 15) - -/* - * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per - * pixel. - */ -#define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) -#define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) -#define LVDS_A0A2_CLKA_POWER_UP (3 << 8) -/* - * Controls the A3 data pair, which contains the additional LSBs for 24 bit - * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be - * on. - */ -#define LVDS_A3_POWER_MASK (3 << 6) -#define LVDS_A3_POWER_DOWN (0 << 6) -#define LVDS_A3_POWER_UP (3 << 6) -/* - * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP - * is set. - */ -#define LVDS_CLKB_POWER_MASK (3 << 4) -#define LVDS_CLKB_POWER_DOWN (0 << 4) -#define LVDS_CLKB_POWER_UP (3 << 4) -/* - * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 - * setting for whether we are in dual-channel mode. The B3 pair will - * additionally only be powered up when LVDS_A3_POWER_UP is set. - */ -#define LVDS_B0B3_POWER_MASK (3 << 2) -#define LVDS_B0B3_POWER_DOWN (0 << 2) -#define LVDS_B0B3_POWER_UP (3 << 2) - -#define PIPEACONF 0x70008 -#define PIPEACONF_ENABLE (1 << 31) -#define PIPEACONF_DISABLE 0 -#define PIPEACONF_DOUBLE_WIDE (1 << 30) -#define PIPECONF_ACTIVE (1 << 30) -#define I965_PIPECONF_ACTIVE (1 << 30) -#define PIPECONF_DSIPLL_LOCK (1 << 29) -#define PIPEACONF_SINGLE_WIDE 0 -#define PIPEACONF_PIPE_UNLOCKED 0 -#define PIPEACONF_DSR (1 << 26) -#define PIPEACONF_PIPE_LOCKED (1 << 25) -#define PIPEACONF_PALETTE 0 -#define PIPECONF_FORCE_BORDER (1 << 25) -#define PIPEACONF_GAMMA (1 << 24) -#define PIPECONF_PROGRESSIVE (0 << 21) -#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) -#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) -#define PIPECONF_PLANE_OFF (1 << 19) -#define PIPECONF_CURSOR_OFF (1 << 18) - -#define PIPEBCONF 0x71008 -#define PIPEBCONF_ENABLE (1 << 31) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_DOUBLE_WIDE (1 << 30) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_GAMMA (1 << 24) -#define PIPEBCONF_PALETTE 0 - -#define PIPECCONF 0x72008 - -#define PIPEBGCMAXRED 0x71010 -#define PIPEBGCMAXGREEN 0x71014 -#define PIPEBGCMAXBLUE 0x71018 - -#define PIPEASTAT 0x70024 -#define PIPEBSTAT 0x71024 -#define PIPECSTAT 0x72024 -#define PIPE_VBLANK_INTERRUPT_STATUS (1UL << 1) -#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL << 2) -#define PIPE_VBLANK_CLEAR (1 << 1) -#define PIPE_VBLANK_STATUS (1 << 1) -#define PIPE_TE_STATUS (1UL << 6) -#define PIPE_DPST_EVENT_STATUS (1UL << 7) -#define PIPE_VSYNC_CLEAR (1UL << 9) -#define PIPE_VSYNC_STATUS (1UL << 9) -#define PIPE_HDMI_AUDIO_UNDERRUN_STATUS (1UL << 10) -#define PIPE_HDMI_AUDIO_BUFFER_DONE_STATUS (1UL << 11) -#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL << 17) -#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL << 18) -#define PIPE_TE_ENABLE (1UL << 22) -#define PIPE_DPST_EVENT_ENABLE (1UL << 23) -#define PIPE_VSYNC_ENABL (1UL << 25) -#define PIPE_HDMI_AUDIO_UNDERRUN (1UL << 26) -#define PIPE_HDMI_AUDIO_BUFFER_DONE (1UL << 27) -#define PIPE_HDMI_AUDIO_INT_MASK (PIPE_HDMI_AUDIO_UNDERRUN | \ - PIPE_HDMI_AUDIO_BUFFER_DONE) -#define PIPE_EVENT_MASK ((1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)|(1 << 22)|(1 << 21)|(1 << 20)|(1 << 16)) -#define PIPE_VBLANK_MASK ((1 << 25)|(1 << 24)|(1 << 18)|(1 << 17)) -#define HISTOGRAM_INT_CONTROL 0x61268 -#define HISTOGRAM_BIN_DATA 0X61264 -#define HISTOGRAM_LOGIC_CONTROL 0x61260 -#define PWM_CONTROL_LOGIC 0x61250 -#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL << 10) -#define HISTOGRAM_INTERRUPT_ENABLE (1UL << 31) -#define HISTOGRAM_LOGIC_ENABLE (1UL << 31) -#define PWM_LOGIC_ENABLE (1UL << 31) -#define PWM_PHASEIN_ENABLE (1UL << 25) -#define PWM_PHASEIN_INT_ENABLE (1UL << 24) -#define PWM_PHASEIN_VB_COUNT 0x00001f00 -#define PWM_PHASEIN_INC 0x0000001f -#define HISTOGRAM_INT_CTRL_CLEAR (1UL << 30) -#define DPST_YUV_LUMA_MODE 0 - -struct dpst_ie_histogram_control { - union { - uint32_t data; - struct { - uint32_t bin_reg_index:7; - uint32_t reserved:4; - uint32_t bin_reg_func_select:1; - uint32_t sync_to_phase_in:1; - uint32_t alt_enhancement_mode:2; - uint32_t reserved1:1; - uint32_t sync_to_phase_in_count:8; - uint32_t histogram_mode_select:1; - uint32_t reserved2:4; - uint32_t ie_pipe_assignment:1; - uint32_t ie_mode_table_enabled:1; - uint32_t ie_histogram_enable:1; - }; - }; -}; - -struct dpst_guardband { - union { - uint32_t data; - struct { - uint32_t guardband:22; - uint32_t guardband_interrupt_delay:8; - uint32_t interrupt_status:1; - uint32_t interrupt_enable:1; - }; - }; -}; - -#define PIPEAFRAMEHIGH 0x70040 -#define PIPEAFRAMEPIXEL 0x70044 -#define PIPEBFRAMEHIGH 0x71040 -#define PIPEBFRAMEPIXEL 0x71044 -#define PIPECFRAMEHIGH 0x72040 -#define PIPECFRAMEPIXEL 0x72044 -#define PIPE_FRAME_HIGH_MASK 0x0000ffff -#define PIPE_FRAME_HIGH_SHIFT 0 -#define PIPE_FRAME_LOW_MASK 0xff000000 -#define PIPE_FRAME_LOW_SHIFT 24 -#define PIPE_PIXEL_MASK 0x00ffffff -#define PIPE_PIXEL_SHIFT 0 - -#define DSPARB 0x70030 -#define DSPFW1 0x70034 -#define DSPFW2 0x70038 -#define DSPFW3 0x7003c -#define DSPFW4 0x70050 -#define DSPFW5 0x70054 -#define DSPFW6 0x70058 -#define DSPCHICKENBIT 0x70400 -#define DSPACNTR 0x70180 -#define DSPBCNTR 0x71180 -#define DSPCCNTR 0x72180 -#define DISPLAY_PLANE_ENABLE (1 << 31) -#define DISPLAY_PLANE_DISABLE 0 -#define DISPPLANE_GAMMA_ENABLE (1 << 30) -#define DISPPLANE_GAMMA_DISABLE 0 -#define DISPPLANE_PIXFORMAT_MASK (0xf << 26) -#define DISPPLANE_8BPP (0x2 << 26) -#define DISPPLANE_15_16BPP (0x4 << 26) -#define DISPPLANE_16BPP (0x5 << 26) -#define DISPPLANE_32BPP_NO_ALPHA (0x6 << 26) -#define DISPPLANE_32BPP (0x7 << 26) -#define DISPPLANE_STEREO_ENABLE (1 << 25) -#define DISPPLANE_STEREO_DISABLE 0 -#define DISPPLANE_SEL_PIPE_MASK (1 << 24) -#define DISPPLANE_SEL_PIPE_POS 24 -#define DISPPLANE_SEL_PIPE_A 0 -#define DISPPLANE_SEL_PIPE_B (1 << 24) -#define DISPPLANE_SRC_KEY_ENABLE (1 << 22) -#define DISPPLANE_SRC_KEY_DISABLE 0 -#define DISPPLANE_LINE_DOUBLE (1 << 20) -#define DISPPLANE_NO_LINE_DOUBLE 0 -#define DISPPLANE_STEREO_POLARITY_FIRST 0 -#define DISPPLANE_STEREO_POLARITY_SECOND (1 << 18) -/* plane B only */ -#define DISPPLANE_ALPHA_TRANS_ENABLE (1 << 15) -#define DISPPLANE_ALPHA_TRANS_DISABLE 0 -#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 -#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) -#define DISPPLANE_BOTTOM (4) - -#define DSPABASE 0x70184 -#define DSPALINOFF 0x70184 -#define DSPASTRIDE 0x70188 - -#define DSPBBASE 0x71184 -#define DSPBLINOFF 0X71184 -#define DSPBADDR DSPBBASE -#define DSPBSTRIDE 0x71188 - -#define DSPCBASE 0x72184 -#define DSPCLINOFF 0x72184 -#define DSPCSTRIDE 0x72188 - -#define DSPAKEYVAL 0x70194 -#define DSPAKEYMASK 0x70198 - -#define DSPAPOS 0x7018C /* reserved */ -#define DSPASIZE 0x70190 -#define DSPBPOS 0x7118C -#define DSPBSIZE 0x71190 -#define DSPCPOS 0x7218C -#define DSPCSIZE 0x72190 - -#define DSPASURF 0x7019C -#define DSPATILEOFF 0x701A4 - -#define DSPBSURF 0x7119C -#define DSPBTILEOFF 0x711A4 - -#define DSPCSURF 0x7219C -#define DSPCTILEOFF 0x721A4 -#define DSPCKEYMAXVAL 0x721A0 -#define DSPCKEYMINVAL 0x72194 -#define DSPCKEYMSK 0x72198 - -#define VGACNTRL 0x71400 -#define VGA_DISP_DISABLE (1 << 31) -#define VGA_2X_MODE (1 << 30) -#define VGA_PIPE_B_SELECT (1 << 29) - -/* - * Overlay registers - */ -#define OV_C_OFFSET 0x08000 -#define OV_OVADD 0x30000 -#define OV_DOVASTA 0x30008 -# define OV_PIPE_SELECT ((1 << 6)|(1 << 7)) -# define OV_PIPE_SELECT_POS 6 -# define OV_PIPE_A 0 -# define OV_PIPE_C 1 -#define OV_OGAMC5 0x30010 -#define OV_OGAMC4 0x30014 -#define OV_OGAMC3 0x30018 -#define OV_OGAMC2 0x3001C -#define OV_OGAMC1 0x30020 -#define OV_OGAMC0 0x30024 -#define OVC_OVADD 0x38000 -#define OVC_DOVCSTA 0x38008 -#define OVC_OGAMC5 0x38010 -#define OVC_OGAMC4 0x38014 -#define OVC_OGAMC3 0x38018 -#define OVC_OGAMC2 0x3801C -#define OVC_OGAMC1 0x38020 -#define OVC_OGAMC0 0x38024 - -/* - * Some BIOS scratch area registers. The 845 (and 830?) store the amount - * of video memory available to the BIOS in SWF1. - */ -#define SWF0 0x71410 -#define SWF1 0x71414 -#define SWF2 0x71418 -#define SWF3 0x7141c -#define SWF4 0x71420 -#define SWF5 0x71424 -#define SWF6 0x71428 - -/* - * 855 scratch registers. - */ -#define SWF00 0x70410 -#define SWF01 0x70414 -#define SWF02 0x70418 -#define SWF03 0x7041c -#define SWF04 0x70420 -#define SWF05 0x70424 -#define SWF06 0x70428 - -#define SWF10 SWF0 -#define SWF11 SWF1 -#define SWF12 SWF2 -#define SWF13 SWF3 -#define SWF14 SWF4 -#define SWF15 SWF5 -#define SWF16 SWF6 - -#define SWF30 0x72414 -#define SWF31 0x72418 -#define SWF32 0x7241c - - -/* - * Palette registers - */ -#define PALETTE_A 0x0a000 -#define PALETTE_B 0x0a800 -#define PALETTE_C 0x0ac00 - -/* Cursor A & B regs */ -#define CURACNTR 0x70080 -#define CURSOR_MODE_DISABLE 0x00 -#define CURSOR_MODE_64_32B_AX 0x07 -#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) -#define MCURSOR_GAMMA_ENABLE (1 << 26) -#define CURABASE 0x70084 -#define CURAPOS 0x70088 -#define CURSOR_POS_MASK 0x007FF -#define CURSOR_POS_SIGN 0x8000 -#define CURSOR_X_SHIFT 0 -#define CURSOR_Y_SHIFT 16 -#define CURBCNTR 0x700c0 -#define CURBBASE 0x700c4 -#define CURBPOS 0x700c8 -#define CURCCNTR 0x700e0 -#define CURCBASE 0x700e4 -#define CURCPOS 0x700e8 - -/* - * Interrupt Registers - */ -#define IER 0x020a0 -#define IIR 0x020a4 -#define IMR 0x020a8 -#define ISR 0x020ac - -/* - * MOORESTOWN delta registers - */ -#define MRST_DPLL_A 0x0f014 -#define MDFLD_DPLL_B 0x0f018 -#define MDFLD_INPUT_REF_SEL (1 << 14) -#define MDFLD_VCO_SEL (1 << 16) -#define DPLLA_MODE_LVDS (2 << 26) /* mrst */ -#define MDFLD_PLL_LATCHEN (1 << 28) -#define MDFLD_PWR_GATE_EN (1 << 30) -#define MDFLD_P1_MASK (0x1FF << 17) -#define MRST_FPA0 0x0f040 -#define MRST_FPA1 0x0f044 -#define MDFLD_DPLL_DIV0 0x0f048 -#define MDFLD_DPLL_DIV1 0x0f04c -#define MRST_PERF_MODE 0x020f4 - -/* - * MEDFIELD HDMI registers - */ -#define HDMIPHYMISCCTL 0x61134 -#define HDMI_PHY_POWER_DOWN 0x7f -#define HDMIB_CONTROL 0x61140 -#define HDMIB_PORT_EN (1 << 31) -#define HDMIB_PIPE_B_SELECT (1 << 30) -#define HDMIB_NULL_PACKET (1 << 9) -#define HDMIB_HDCP_PORT (1 << 5) - -/* #define LVDS 0x61180 */ -#define MRST_PANEL_8TO6_DITHER_ENABLE (1 << 25) -#define MRST_PANEL_24_DOT_1_FORMAT (1 << 24) -#define LVDS_A3_POWER_UP_0_OUTPUT (1 << 6) - -#define MIPI 0x61190 -#define MIPI_C 0x62190 -#define MIPI_PORT_EN (1 << 31) -/* Turns on border drawing to allow centered display. */ -#define SEL_FLOPPED_HSTX (1 << 23) -#define PASS_FROM_SPHY_TO_AFE (1 << 16) -#define MIPI_BORDER_EN (1 << 15) -#define MIPIA_3LANE_MIPIC_1LANE 0x1 -#define MIPIA_2LANE_MIPIC_2LANE 0x2 -#define TE_TRIGGER_DSI_PROTOCOL (1 << 2) -#define TE_TRIGGER_GPIO_PIN (1 << 3) -#define MIPI_TE_COUNT 0x61194 - -/* #define PP_CONTROL 0x61204 */ -#define POWER_DOWN_ON_RESET (1 << 1) - -/* #define PFIT_CONTROL 0x61230 */ -#define PFIT_PIPE_SELECT (3 << 29) -#define PFIT_PIPE_SELECT_SHIFT (29) - -/* #define BLC_PWM_CTL 0x61254 */ -#define MRST_BACKLIGHT_MODULATION_FREQ_SHIFT (16) -#define MRST_BACKLIGHT_MODULATION_FREQ_MASK (0xffff << 16) - -/* #define PIPEACONF 0x70008 */ -#define PIPEACONF_PIPE_STATE (1 << 30) -/* #define DSPACNTR 0x70180 */ - -#define MRST_DSPABASE 0x7019c -#define MRST_DSPBBASE 0x7119c -#define MDFLD_DSPCBASE 0x7219c - -/* - * Moorestown registers. - */ - -/* - * MIPI IP registers - */ -#define MIPIC_REG_OFFSET 0x800 - -#define DEVICE_READY_REG 0xb000 -#define LP_OUTPUT_HOLD (1 << 16) -#define EXIT_ULPS_DEV_READY 0x3 -#define LP_OUTPUT_HOLD_RELEASE 0x810000 -# define ENTERING_ULPS (2 << 1) -# define EXITING_ULPS (1 << 1) -# define ULPS_MASK (3 << 1) -# define BUS_POSSESSION (1 << 3) -#define INTR_STAT_REG 0xb004 -#define RX_SOT_ERROR (1 << 0) -#define RX_SOT_SYNC_ERROR (1 << 1) -#define RX_ESCAPE_MODE_ENTRY_ERROR (1 << 3) -#define RX_LP_TX_SYNC_ERROR (1 << 4) -#define RX_HS_RECEIVE_TIMEOUT_ERROR (1 << 5) -#define RX_FALSE_CONTROL_ERROR (1 << 6) -#define RX_ECC_SINGLE_BIT_ERROR (1 << 7) -#define RX_ECC_MULTI_BIT_ERROR (1 << 8) -#define RX_CHECKSUM_ERROR (1 << 9) -#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 10) -#define RX_DSI_VC_ID_INVALID (1 << 11) -#define TX_FALSE_CONTROL_ERROR (1 << 12) -#define TX_ECC_SINGLE_BIT_ERROR (1 << 13) -#define TX_ECC_MULTI_BIT_ERROR (1 << 14) -#define TX_CHECKSUM_ERROR (1 << 15) -#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 16) -#define TX_DSI_VC_ID_INVALID (1 << 17) -#define HIGH_CONTENTION (1 << 18) -#define LOW_CONTENTION (1 << 19) -#define DPI_FIFO_UNDER_RUN (1 << 20) -#define HS_TX_TIMEOUT (1 << 21) -#define LP_RX_TIMEOUT (1 << 22) -#define TURN_AROUND_ACK_TIMEOUT (1 << 23) -#define ACK_WITH_NO_ERROR (1 << 24) -#define HS_GENERIC_WR_FIFO_FULL (1 << 27) -#define LP_GENERIC_WR_FIFO_FULL (1 << 28) -#define SPL_PKT_SENT (1 << 30) -#define INTR_EN_REG 0xb008 -#define DSI_FUNC_PRG_REG 0xb00c -#define DPI_CHANNEL_NUMBER_POS 0x03 -#define DBI_CHANNEL_NUMBER_POS 0x05 -#define FMT_DPI_POS 0x07 -#define FMT_DBI_POS 0x0A -#define DBI_DATA_WIDTH_POS 0x0D - -/* DPI PIXEL FORMATS */ -#define RGB_565_FMT 0x01 /* RGB 565 FORMAT */ -#define RGB_666_FMT 0x02 /* RGB 666 FORMAT */ -#define LRGB_666_FMT 0x03 /* RGB LOOSELY PACKED - * 666 FORMAT - */ -#define RGB_888_FMT 0x04 /* RGB 888 FORMAT */ -#define VIRTUAL_CHANNEL_NUMBER_0 0x00 /* Virtual channel 0 */ -#define VIRTUAL_CHANNEL_NUMBER_1 0x01 /* Virtual channel 1 */ -#define VIRTUAL_CHANNEL_NUMBER_2 0x02 /* Virtual channel 2 */ -#define VIRTUAL_CHANNEL_NUMBER_3 0x03 /* Virtual channel 3 */ - -#define DBI_NOT_SUPPORTED 0x00 /* command mode - * is not supported - */ -#define DBI_DATA_WIDTH_16BIT 0x01 /* 16 bit data */ -#define DBI_DATA_WIDTH_9BIT 0x02 /* 9 bit data */ -#define DBI_DATA_WIDTH_8BIT 0x03 /* 8 bit data */ -#define DBI_DATA_WIDTH_OPT1 0x04 /* option 1 */ -#define DBI_DATA_WIDTH_OPT2 0x05 /* option 2 */ - -#define HS_TX_TIMEOUT_REG 0xb010 -#define LP_RX_TIMEOUT_REG 0xb014 -#define TURN_AROUND_TIMEOUT_REG 0xb018 -#define DEVICE_RESET_REG 0xb01C -#define DPI_RESOLUTION_REG 0xb020 -#define RES_V_POS 0x10 -#define DBI_RESOLUTION_REG 0xb024 /* Reserved for MDFLD */ -#define HORIZ_SYNC_PAD_COUNT_REG 0xb028 -#define HORIZ_BACK_PORCH_COUNT_REG 0xb02C -#define HORIZ_FRONT_PORCH_COUNT_REG 0xb030 -#define HORIZ_ACTIVE_AREA_COUNT_REG 0xb034 -#define VERT_SYNC_PAD_COUNT_REG 0xb038 -#define VERT_BACK_PORCH_COUNT_REG 0xb03c -#define VERT_FRONT_PORCH_COUNT_REG 0xb040 -#define HIGH_LOW_SWITCH_COUNT_REG 0xb044 -#define DPI_CONTROL_REG 0xb048 -#define DPI_SHUT_DOWN (1 << 0) -#define DPI_TURN_ON (1 << 1) -#define DPI_COLOR_MODE_ON (1 << 2) -#define DPI_COLOR_MODE_OFF (1 << 3) -#define DPI_BACK_LIGHT_ON (1 << 4) -#define DPI_BACK_LIGHT_OFF (1 << 5) -#define DPI_LP (1 << 6) -#define DPI_DATA_REG 0xb04c -#define DPI_BACK_LIGHT_ON_DATA 0x07 -#define DPI_BACK_LIGHT_OFF_DATA 0x17 -#define INIT_COUNT_REG 0xb050 -#define MAX_RET_PAK_REG 0xb054 -#define VIDEO_FMT_REG 0xb058 -#define COMPLETE_LAST_PCKT (1 << 2) -#define EOT_DISABLE_REG 0xb05c -#define ENABLE_CLOCK_STOPPING (1 << 1) -#define LP_BYTECLK_REG 0xb060 -#define LP_GEN_DATA_REG 0xb064 -#define HS_GEN_DATA_REG 0xb068 -#define LP_GEN_CTRL_REG 0xb06C -#define HS_GEN_CTRL_REG 0xb070 -#define DCS_CHANNEL_NUMBER_POS 0x6 -#define MCS_COMMANDS_POS 0x8 -#define WORD_COUNTS_POS 0x8 -#define MCS_PARAMETER_POS 0x10 -#define GEN_FIFO_STAT_REG 0xb074 -#define HS_DATA_FIFO_FULL (1 << 0) -#define HS_DATA_FIFO_HALF_EMPTY (1 << 1) -#define HS_DATA_FIFO_EMPTY (1 << 2) -#define LP_DATA_FIFO_FULL (1 << 8) -#define LP_DATA_FIFO_HALF_EMPTY (1 << 9) -#define LP_DATA_FIFO_EMPTY (1 << 10) -#define HS_CTRL_FIFO_FULL (1 << 16) -#define HS_CTRL_FIFO_HALF_EMPTY (1 << 17) -#define HS_CTRL_FIFO_EMPTY (1 << 18) -#define LP_CTRL_FIFO_FULL (1 << 24) -#define LP_CTRL_FIFO_HALF_EMPTY (1 << 25) -#define LP_CTRL_FIFO_EMPTY (1 << 26) -#define DBI_FIFO_EMPTY (1 << 27) -#define DPI_FIFO_EMPTY (1 << 28) -#define HS_LS_DBI_ENABLE_REG 0xb078 -#define TXCLKESC_REG 0xb07c -#define DPHY_PARAM_REG 0xb080 -#define DBI_BW_CTRL_REG 0xb084 -#define CLK_LANE_SWT_REG 0xb088 - -/* - * MIPI Adapter registers - */ -#define MIPI_CONTROL_REG 0xb104 -#define MIPI_2X_CLOCK_BITS ((1 << 0) | (1 << 1)) -#define MIPI_DATA_ADDRESS_REG 0xb108 -#define MIPI_DATA_LENGTH_REG 0xb10C -#define MIPI_COMMAND_ADDRESS_REG 0xb110 -#define MIPI_COMMAND_LENGTH_REG 0xb114 -#define MIPI_READ_DATA_RETURN_REG0 0xb118 -#define MIPI_READ_DATA_RETURN_REG1 0xb11C -#define MIPI_READ_DATA_RETURN_REG2 0xb120 -#define MIPI_READ_DATA_RETURN_REG3 0xb124 -#define MIPI_READ_DATA_RETURN_REG4 0xb128 -#define MIPI_READ_DATA_RETURN_REG5 0xb12C -#define MIPI_READ_DATA_RETURN_REG6 0xb130 -#define MIPI_READ_DATA_RETURN_REG7 0xb134 -#define MIPI_READ_DATA_VALID_REG 0xb138 - -/* DBI COMMANDS */ -#define soft_reset 0x01 -/* - * The display module performs a software reset. - * Registers are written with their SW Reset default values. - */ -#define get_power_mode 0x0a -/* - * The display module returns the current power mode - */ -#define get_address_mode 0x0b -/* - * The display module returns the current status. - */ -#define get_pixel_format 0x0c -/* - * This command gets the pixel format for the RGB image data - * used by the interface. - */ -#define get_display_mode 0x0d -/* - * The display module returns the Display Image Mode status. - */ -#define get_signal_mode 0x0e -/* - * The display module returns the Display Signal Mode. - */ -#define get_diagnostic_result 0x0f -/* - * The display module returns the self-diagnostic results following - * a Sleep Out command. - */ -#define enter_sleep_mode 0x10 -/* - * This command causes the display module to enter the Sleep mode. - * In this mode, all unnecessary blocks inside the display module are - * disabled except interface communication. This is the lowest power - * mode the display module supports. - */ -#define exit_sleep_mode 0x11 -/* - * This command causes the display module to exit Sleep mode. - * All blocks inside the display module are enabled. - */ -#define enter_partial_mode 0x12 -/* - * This command causes the display module to enter the Partial Display - * Mode. The Partial Display Mode window is described by the - * set_partial_area command. - */ -#define enter_normal_mode 0x13 -/* - * This command causes the display module to enter the Normal mode. - * Normal Mode is defined as Partial Display mode and Scroll mode are off - */ -#define exit_invert_mode 0x20 -/* - * This command causes the display module to stop inverting the image - * data on the display device. The frame memory contents remain unchanged. - * No status bits are changed. - */ -#define enter_invert_mode 0x21 -/* - * This command causes the display module to invert the image data only on - * the display device. The frame memory contents remain unchanged. - * No status bits are changed. - */ -#define set_gamma_curve 0x26 -/* - * This command selects the desired gamma curve for the display device. - * Four fixed gamma curves are defined in section DCS spec. - */ -#define set_display_off 0x28 -/* ************************************************************************* *\ -This command causes the display module to stop displaying the image data -on the display device. The frame memory contents remain unchanged. -No status bits are changed. -\* ************************************************************************* */ -#define set_display_on 0x29 -/* ************************************************************************* *\ -This command causes the display module to start displaying the image data -on the display device. The frame memory contents remain unchanged. -No status bits are changed. -\* ************************************************************************* */ -#define set_column_address 0x2a -/* - * This command defines the column extent of the frame memory accessed by - * the hostprocessor with the read_memory_continue and - * write_memory_continue commands. - * No status bits are changed. - */ -#define set_page_addr 0x2b -/* - * This command defines the page extent of the frame memory accessed by - * the host processor with the write_memory_continue and - * read_memory_continue command. - * No status bits are changed. - */ -#define write_mem_start 0x2c -/* - * This command transfers image data from the host processor to the - * display modules frame memory starting at the pixel location specified - * by preceding set_column_address and set_page_address commands. - */ -#define set_partial_area 0x30 -/* - * This command defines the Partial Display mode s display area. - * There are two parameters associated with this command, the first - * defines the Start Row (SR) and the second the End Row (ER). SR and ER - * refer to the Frame Memory Line Pointer. - */ -#define set_scroll_area 0x33 -/* - * This command defines the display modules Vertical Scrolling Area. - */ -#define set_tear_off 0x34 -/* - * This command turns off the display modules Tearing Effect output - * signal on the TE signal line. - */ -#define set_tear_on 0x35 -/* - * This command turns on the display modules Tearing Effect output signal - * on the TE signal line. - */ -#define set_address_mode 0x36 -/* - * This command sets the data order for transfers from the host processor - * to display modules frame memory,bits B[7:5] and B3, and from the - * display modules frame memory to the display device, bits B[2:0] and B4. - */ -#define set_scroll_start 0x37 -/* - * This command sets the start of the vertical scrolling area in the frame - * memory. The vertical scrolling area is fully defined when this command - * is used with the set_scroll_area command The set_scroll_start command - * has one parameter, the Vertical Scroll Pointer. The VSP defines the - * line in the frame memory that is written to the display device as the - * first line of the vertical scroll area. - */ -#define exit_idle_mode 0x38 -/* - * This command causes the display module to exit Idle mode. - */ -#define enter_idle_mode 0x39 -/* - * This command causes the display module to enter Idle Mode. - * In Idle Mode, color expression is reduced. Colors are shown on the - * display device using the MSB of each of the R, G and B color - * components in the frame memory - */ -#define set_pixel_format 0x3a -/* - * This command sets the pixel format for the RGB image data used by the - * interface. - * Bits D[6:4] DPI Pixel Format Definition - * Bits D[2:0] DBI Pixel Format Definition - * Bits D7 and D3 are not used. - */ -#define DCS_PIXEL_FORMAT_3bpp 0x1 -#define DCS_PIXEL_FORMAT_8bpp 0x2 -#define DCS_PIXEL_FORMAT_12bpp 0x3 -#define DCS_PIXEL_FORMAT_16bpp 0x5 -#define DCS_PIXEL_FORMAT_18bpp 0x6 -#define DCS_PIXEL_FORMAT_24bpp 0x7 - -#define write_mem_cont 0x3c - -/* - * This command transfers image data from the host processor to the - * display module's frame memory continuing from the pixel location - * following the previous write_memory_continue or write_memory_start - * command. - */ -#define set_tear_scanline 0x44 -/* - * This command turns on the display modules Tearing Effect output signal - * on the TE signal line when the display module reaches line N. - */ -#define get_scanline 0x45 -/* - * The display module returns the current scanline, N, used to update the - * display device. The total number of scanlines on a display device is - * defined as VSYNC + VBP + VACT + VFP.The first scanline is defined as - * the first line of V Sync and is denoted as Line 0. - * When in Sleep Mode, the value returned by get_scanline is undefined. - */ - -/* MCS or Generic COMMANDS */ -/* MCS/generic data type */ -#define GEN_SHORT_WRITE_0 0x03 /* generic short write, no parameters */ -#define GEN_SHORT_WRITE_1 0x13 /* generic short write, 1 parameters */ -#define GEN_SHORT_WRITE_2 0x23 /* generic short write, 2 parameters */ -#define GEN_READ_0 0x04 /* generic read, no parameters */ -#define GEN_READ_1 0x14 /* generic read, 1 parameters */ -#define GEN_READ_2 0x24 /* generic read, 2 parameters */ -#define GEN_LONG_WRITE 0x29 /* generic long write */ -#define MCS_SHORT_WRITE_0 0x05 /* MCS short write, no parameters */ -#define MCS_SHORT_WRITE_1 0x15 /* MCS short write, 1 parameters */ -#define MCS_READ 0x06 /* MCS read, no parameters */ -#define MCS_LONG_WRITE 0x39 /* MCS long write */ -/* MCS/generic commands */ -/* TPO MCS */ -#define write_display_profile 0x50 -#define write_display_brightness 0x51 -#define write_ctrl_display 0x53 -#define write_ctrl_cabc 0x55 - #define UI_IMAGE 0x01 - #define STILL_IMAGE 0x02 - #define MOVING_IMAGE 0x03 -#define write_hysteresis 0x57 -#define write_gamma_setting 0x58 -#define write_cabc_min_bright 0x5e -#define write_kbbc_profile 0x60 -/* TMD MCS */ -#define tmd_write_display_brightness 0x8c - -/* - * This command is used to control ambient light, panel backlight - * brightness and gamma settings. - */ -#define BRIGHT_CNTL_BLOCK_ON (1 << 5) -#define AMBIENT_LIGHT_SENSE_ON (1 << 4) -#define DISPLAY_DIMMING_ON (1 << 3) -#define BACKLIGHT_ON (1 << 2) -#define DISPLAY_BRIGHTNESS_AUTO (1 << 1) -#define GAMMA_AUTO (1 << 0) - -/* DCS Interface Pixel Formats */ -#define DCS_PIXEL_FORMAT_3BPP 0x1 -#define DCS_PIXEL_FORMAT_8BPP 0x2 -#define DCS_PIXEL_FORMAT_12BPP 0x3 -#define DCS_PIXEL_FORMAT_16BPP 0x5 -#define DCS_PIXEL_FORMAT_18BPP 0x6 -#define DCS_PIXEL_FORMAT_24BPP 0x7 -/* ONE PARAMETER READ DATA */ -#define addr_mode_data 0xfc -#define diag_res_data 0x00 -#define disp_mode_data 0x23 -#define pxl_fmt_data 0x77 -#define pwr_mode_data 0x74 -#define sig_mode_data 0x00 -/* TWO PARAMETERS READ DATA */ -#define scanline_data1 0xff -#define scanline_data2 0xff -#define NON_BURST_MODE_SYNC_PULSE 0x01 /* Non Burst Mode - * with Sync Pulse - */ -#define NON_BURST_MODE_SYNC_EVENTS 0x02 /* Non Burst Mode - * with Sync events - */ -#define BURST_MODE 0x03 /* Burst Mode */ -#define DBI_COMMAND_BUFFER_SIZE 0x240 /* 0x32 */ /* 0x120 */ - /* Allocate at least - * 0x100 Byte with 32 - * byte alignment - */ -#define DBI_DATA_BUFFER_SIZE 0x120 /* Allocate at least - * 0x100 Byte with 32 - * byte alignment - */ -#define DBI_CB_TIME_OUT 0xFFFF - -#define GEN_FB_TIME_OUT 2000 - -#define SKU_83 0x01 -#define SKU_100 0x02 -#define SKU_100L 0x04 -#define SKU_BYPASS 0x08 - -/* Some handy macros for playing with bitfields. */ -#define PSB_MASK(high, low) (((1<<((high)-(low)+1))-1)<<(low)) -#define SET_FIELD(value, field) (((value) << field ## _SHIFT) & field ## _MASK) -#define GET_FIELD(word, field) (((word) & field ## _MASK) >> field ## _SHIFT) - -#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) - -/* PCI config space */ - -#define SB_PCKT 0x02100 /* cedarview */ -# define SB_OPCODE_MASK PSB_MASK(31, 16) -# define SB_OPCODE_SHIFT 16 -# define SB_OPCODE_READ 0 -# define SB_OPCODE_WRITE 1 -# define SB_DEST_MASK PSB_MASK(15, 8) -# define SB_DEST_SHIFT 8 -# define SB_DEST_DPLL 0x88 -# define SB_BYTE_ENABLE_MASK PSB_MASK(7, 4) -# define SB_BYTE_ENABLE_SHIFT 4 -# define SB_BUSY (1 << 0) - - -/* 32-bit value read/written from the DPIO reg. */ -#define SB_DATA 0x02104 /* cedarview */ -/* 32-bit address of the DPIO reg to be read/written. */ -#define SB_ADDR 0x02108 /* cedarview */ -#define DPIO_CFG 0x02110 /* cedarview */ -# define DPIO_MODE_SELECT_1 (1 << 3) -# define DPIO_MODE_SELECT_0 (1 << 2) -# define DPIO_SFR_BYPASS (1 << 1) -/* reset is active low */ -# define DPIO_CMN_RESET_N (1 << 0) - -/* Cedarview sideband registers */ -#define _SB_M_A 0x8008 -#define _SB_M_B 0x8028 -#define SB_M(pipe) _PIPE(pipe, _SB_M_A, _SB_M_B) -# define SB_M_DIVIDER_MASK (0xFF << 24) -# define SB_M_DIVIDER_SHIFT 24 - -#define _SB_N_VCO_A 0x8014 -#define _SB_N_VCO_B 0x8034 -#define SB_N_VCO(pipe) _PIPE(pipe, _SB_N_VCO_A, _SB_N_VCO_B) -#define SB_N_VCO_SEL_MASK PSB_MASK(31, 30) -#define SB_N_VCO_SEL_SHIFT 30 -#define SB_N_DIVIDER_MASK PSB_MASK(29, 26) -#define SB_N_DIVIDER_SHIFT 26 -#define SB_N_CB_TUNE_MASK PSB_MASK(25, 24) -#define SB_N_CB_TUNE_SHIFT 24 - -#define _SB_REF_A 0x8018 -#define _SB_REF_B 0x8038 -#define SB_REF_SFR(pipe) _PIPE(pipe, _SB_REF_A, _SB_REF_B) - -#define _SB_P_A 0x801c -#define _SB_P_B 0x803c -#define SB_P(pipe) _PIPE(pipe, _SB_P_A, _SB_P_B) -#define SB_P2_DIVIDER_MASK PSB_MASK(31, 30) -#define SB_P2_DIVIDER_SHIFT 30 -#define SB_P2_10 0 /* HDMI, DP, DAC */ -#define SB_P2_5 1 /* DAC */ -#define SB_P2_14 2 /* LVDS single */ -#define SB_P2_7 3 /* LVDS double */ -#define SB_P1_DIVIDER_MASK PSB_MASK(15, 12) -#define SB_P1_DIVIDER_SHIFT 12 - -#define PSB_LANE0 0x120 -#define PSB_LANE1 0x220 -#define PSB_LANE2 0x2320 -#define PSB_LANE3 0x2420 - -#define LANE_PLL_MASK (0x7 << 20) -#define LANE_PLL_ENABLE (0x3 << 20) - - -#endif diff --git a/drivers/staging/gma500/psb_intel_sdvo.c b/drivers/staging/gma500/psb_intel_sdvo.c deleted file mode 100644 index a4bad1af4b7c..000000000000 --- a/drivers/staging/gma500/psb_intel_sdvo.c +++ /dev/null @@ -1,1293 +0,0 @@ -/* - * Copyright (c) 2006-2007 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - */ - -#include -#include -/* #include */ -#include -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "psb_intel_sdvo_regs.h" - -struct psb_intel_sdvo_priv { - struct psb_intel_i2c_chan *i2c_bus; - int slaveaddr; - int output_device; - - u16 active_outputs; - - struct psb_intel_sdvo_caps caps; - int pixel_clock_min, pixel_clock_max; - - int save_sdvo_mult; - u16 save_active_outputs; - struct psb_intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2; - struct psb_intel_sdvo_dtd save_output_dtd[16]; - u32 save_SDVOX; - u8 in_out_map[4]; - - u8 by_input_wiring; - u32 active_device; -}; - -/** - * Writes the SDVOB or SDVOC with the given value, but always writes both - * SDVOB and SDVOC to work around apparent hardware issues (according to - * comments in the BIOS). - */ -void psb_intel_sdvo_write_sdvox(struct psb_intel_output *psb_intel_output, - u32 val) -{ - struct drm_device *dev = psb_intel_output->base.dev; - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - u32 bval = val, cval = val; - int i; - - if (sdvo_priv->output_device == SDVOB) - cval = REG_READ(SDVOC); - else - bval = REG_READ(SDVOB); - /* - * Write the registers twice for luck. Sometimes, - * writing them only once doesn't appear to 'stick'. - * The BIOS does this too. Yay, magic - */ - for (i = 0; i < 2; i++) { - REG_WRITE(SDVOB, bval); - REG_READ(SDVOB); - REG_WRITE(SDVOC, cval); - REG_READ(SDVOC); - } -} - -static bool psb_intel_sdvo_read_byte( - struct psb_intel_output *psb_intel_output, - u8 addr, u8 *ch) -{ - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - u8 out_buf[2]; - u8 buf[2]; - int ret; - - struct i2c_msg msgs[] = { - { - .addr = sdvo_priv->i2c_bus->slave_addr, - .flags = 0, - .len = 1, - .buf = out_buf, - }, - { - .addr = sdvo_priv->i2c_bus->slave_addr, - .flags = I2C_M_RD, - .len = 1, - .buf = buf, - } - }; - - out_buf[0] = addr; - out_buf[1] = 0; - - ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2); - if (ret == 2) { - *ch = buf[0]; - return true; - } - - return false; -} - -static bool psb_intel_sdvo_write_byte( - struct psb_intel_output *psb_intel_output, - int addr, u8 ch) -{ - u8 out_buf[2]; - struct i2c_msg msgs[] = { - { - .addr = psb_intel_output->i2c_bus->slave_addr, - .flags = 0, - .len = 2, - .buf = out_buf, - } - }; - - out_buf[0] = addr; - out_buf[1] = ch; - - if (i2c_transfer(&psb_intel_output->i2c_bus->adapter, msgs, 1) == 1) - return true; - return false; -} - -#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} -/** Mapping of command numbers to names, for debug output */ -static const struct _sdvo_cmd_name { - u8 cmd; - char *name; -} sdvo_cmd_names[] = { -SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG), - SDVO_CMD_NAME_ENTRY - (SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2), - SDVO_CMD_NAME_ENTRY - (SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING), - SDVO_CMD_NAME_ENTRY - (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1), - SDVO_CMD_NAME_ENTRY - (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2), - SDVO_CMD_NAME_ENTRY - (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE), - SDVO_CMD_NAME_ENTRY - (SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE), - SDVO_CMD_NAME_ENTRY - (SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), - SDVO_CMD_NAME_ENTRY - (SDVO_CMD_SET_TV_RESOLUTION_SUPPORT), - SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),}; - -#define SDVO_NAME(dev_priv) \ - ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC") -#define SDVO_PRIV(output) ((struct psb_intel_sdvo_priv *) (output)->dev_priv) - -static void psb_intel_sdvo_write_cmd(struct psb_intel_output *psb_intel_output, - u8 cmd, - void *args, - int args_len) -{ - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - int i; - - if (0) { - printk(KERN_DEBUG "%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd); - for (i = 0; i < args_len; i++) - printk(KERN_CONT "%02X ", ((u8 *) args)[i]); - for (; i < 8; i++) - printk(KERN_CONT " "); - for (i = 0; - i < - sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); - i++) { - if (cmd == sdvo_cmd_names[i].cmd) { - printk(KERN_CONT - "(%s)", sdvo_cmd_names[i].name); - break; - } - } - if (i == - sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0])) - printk(KERN_CONT "(%02X)", cmd); - printk(KERN_CONT "\n"); - } - - for (i = 0; i < args_len; i++) { - psb_intel_sdvo_write_byte(psb_intel_output, - SDVO_I2C_ARG_0 - i, - ((u8 *) args)[i]); - } - - psb_intel_sdvo_write_byte(psb_intel_output, SDVO_I2C_OPCODE, cmd); -} - -static const char *const cmd_status_names[] = { - "Power on", - "Success", - "Not supported", - "Invalid arg", - "Pending", - "Target not specified", - "Scaling not supported" -}; - -static u8 psb_intel_sdvo_read_response( - struct psb_intel_output *psb_intel_output, - void *response, int response_len) -{ - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - int i; - u8 status; - u8 retry = 50; - - while (retry--) { - /* Read the command response */ - for (i = 0; i < response_len; i++) { - psb_intel_sdvo_read_byte(psb_intel_output, - SDVO_I2C_RETURN_0 + i, - &((u8 *) response)[i]); - } - - /* read the return status */ - psb_intel_sdvo_read_byte(psb_intel_output, - SDVO_I2C_CMD_STATUS, - &status); - - if (0) { - pr_debug("%s: R: ", SDVO_NAME(sdvo_priv)); - for (i = 0; i < response_len; i++) - printk(KERN_CONT "%02X ", ((u8 *) response)[i]); - for (; i < 8; i++) - printk(" "); - if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) - printk(KERN_CONT "(%s)", - cmd_status_names[status]); - else - printk(KERN_CONT "(??? %d)", status); - printk(KERN_CONT "\n"); - } - - if (status != SDVO_CMD_STATUS_PENDING) - return status; - - mdelay(50); - } - - return status; -} - -int psb_intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) -{ - if (mode->clock >= 100000) - return 1; - else if (mode->clock >= 50000) - return 2; - else - return 4; -} - -/** - * Don't check status code from this as it switches the bus back to the - * SDVO chips which defeats the purpose of doing a bus switch in the first - * place. - */ -void psb_intel_sdvo_set_control_bus_switch( - struct psb_intel_output *psb_intel_output, - u8 target) -{ - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_SET_CONTROL_BUS_SWITCH, - &target, - 1); -} - -static bool psb_intel_sdvo_set_target_input( - struct psb_intel_output *psb_intel_output, - bool target_0, bool target_1) -{ - struct psb_intel_sdvo_set_target_input_args targets = { 0 }; - u8 status; - - if (target_0 && target_1) - return SDVO_CMD_STATUS_NOTSUPP; - - if (target_1) - targets.target_1 = 1; - - psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_TARGET_INPUT, - &targets, sizeof(targets)); - - status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0); - - return status == SDVO_CMD_STATUS_SUCCESS; -} - -/** - * Return whether each input is trained. - * - * This function is making an assumption about the layout of the response, - * which should be checked against the docs. - */ -static bool psb_intel_sdvo_get_trained_inputs(struct psb_intel_output - *psb_intel_output, bool *input_1, - bool *input_2) -{ - struct psb_intel_sdvo_get_trained_inputs_response response; - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_GET_TRAINED_INPUTS, - NULL, 0); - status = - psb_intel_sdvo_read_response(psb_intel_output, &response, - sizeof(response)); - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - - *input_1 = response.input0_trained; - *input_2 = response.input1_trained; - return true; -} - -static bool psb_intel_sdvo_get_active_outputs(struct psb_intel_output - *psb_intel_output, u16 *outputs) -{ - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_GET_ACTIVE_OUTPUTS, - NULL, 0); - status = - psb_intel_sdvo_read_response(psb_intel_output, outputs, - sizeof(*outputs)); - - return status == SDVO_CMD_STATUS_SUCCESS; -} - -static bool psb_intel_sdvo_set_active_outputs(struct psb_intel_output - *psb_intel_output, u16 outputs) -{ - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_ACTIVE_OUTPUTS, - &outputs, sizeof(outputs)); - status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0); - return status == SDVO_CMD_STATUS_SUCCESS; -} - -static bool psb_intel_sdvo_set_encoder_power_state(struct psb_intel_output - *psb_intel_output, int mode) -{ - u8 status, state = SDVO_ENCODER_STATE_ON; - - switch (mode) { - case DRM_MODE_DPMS_ON: - state = SDVO_ENCODER_STATE_ON; - break; - case DRM_MODE_DPMS_STANDBY: - state = SDVO_ENCODER_STATE_STANDBY; - break; - case DRM_MODE_DPMS_SUSPEND: - state = SDVO_ENCODER_STATE_SUSPEND; - break; - case DRM_MODE_DPMS_OFF: - state = SDVO_ENCODER_STATE_OFF; - break; - } - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_SET_ENCODER_POWER_STATE, &state, - sizeof(state)); - status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0); - - return status == SDVO_CMD_STATUS_SUCCESS; -} - -static bool psb_intel_sdvo_get_input_pixel_clock_range(struct psb_intel_output - *psb_intel_output, - int *clock_min, - int *clock_max) -{ - struct psb_intel_sdvo_pixel_clock_range clocks; - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, NULL, - 0); - - status = - psb_intel_sdvo_read_response(psb_intel_output, &clocks, - sizeof(clocks)); - - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - - /* Convert the values from units of 10 kHz to kHz. */ - *clock_min = clocks.min * 10; - *clock_max = clocks.max * 10; - - return true; -} - -static bool psb_intel_sdvo_set_target_output( - struct psb_intel_output *psb_intel_output, - u16 outputs) -{ - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_TARGET_OUTPUT, - &outputs, sizeof(outputs)); - - status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0); - return status == SDVO_CMD_STATUS_SUCCESS; -} - -static bool psb_intel_sdvo_get_timing(struct psb_intel_output *psb_intel_output, - u8 cmd, struct psb_intel_sdvo_dtd *dtd) -{ - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, cmd, NULL, 0); - status = psb_intel_sdvo_read_response(psb_intel_output, &dtd->part1, - sizeof(dtd->part1)); - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - - psb_intel_sdvo_write_cmd(psb_intel_output, cmd + 1, NULL, 0); - status = psb_intel_sdvo_read_response(psb_intel_output, &dtd->part2, - sizeof(dtd->part2)); - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - - return true; -} - -static bool psb_intel_sdvo_get_input_timing( - struct psb_intel_output *psb_intel_output, - struct psb_intel_sdvo_dtd *dtd) -{ - return psb_intel_sdvo_get_timing(psb_intel_output, - SDVO_CMD_GET_INPUT_TIMINGS_PART1, - dtd); -} - -static bool psb_intel_sdvo_set_timing( - struct psb_intel_output *psb_intel_output, - u8 cmd, - struct psb_intel_sdvo_dtd *dtd) -{ - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, cmd, &dtd->part1, - sizeof(dtd->part1)); - status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0); - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - - psb_intel_sdvo_write_cmd(psb_intel_output, cmd + 1, &dtd->part2, - sizeof(dtd->part2)); - status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0); - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - - return true; -} - -static bool psb_intel_sdvo_set_input_timing( - struct psb_intel_output *psb_intel_output, - struct psb_intel_sdvo_dtd *dtd) -{ - return psb_intel_sdvo_set_timing(psb_intel_output, - SDVO_CMD_SET_INPUT_TIMINGS_PART1, - dtd); -} - -static bool psb_intel_sdvo_set_output_timing( - struct psb_intel_output *psb_intel_output, - struct psb_intel_sdvo_dtd *dtd) -{ - return psb_intel_sdvo_set_timing(psb_intel_output, - SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, - dtd); -} - -static int psb_intel_sdvo_get_clock_rate_mult(struct psb_intel_output - *psb_intel_output) -{ - u8 response, status; - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_GET_CLOCK_RATE_MULT, - NULL, - 0); - - status = psb_intel_sdvo_read_response(psb_intel_output, &response, 1); - - if (status != SDVO_CMD_STATUS_SUCCESS) { - DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n"); - return SDVO_CLOCK_RATE_MULT_1X; - } else { - DRM_DEBUG("Current clock rate multiplier: %d\n", response); - } - - return response; -} - -static bool psb_intel_sdvo_set_clock_rate_mult(struct psb_intel_output - *psb_intel_output, u8 val) -{ - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_SET_CLOCK_RATE_MULT, - &val, - 1); - - status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0); - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - - return true; -} - -static bool psb_sdvo_set_current_inoutmap(struct psb_intel_output *output, - u32 in0outputmask, - u32 in1outputmask) -{ - u8 byArgs[4]; - u8 status; - int i; - struct psb_intel_sdvo_priv *sdvo_priv = output->dev_priv; - - /* Make all fields of the args/ret to zero */ - memset(byArgs, 0, sizeof(byArgs)); - - /* Fill up the argument values; */ - byArgs[0] = (u8) (in0outputmask & 0xFF); - byArgs[1] = (u8) ((in0outputmask >> 8) & 0xFF); - byArgs[2] = (u8) (in1outputmask & 0xFF); - byArgs[3] = (u8) ((in1outputmask >> 8) & 0xFF); - - - /*save inoutmap arg here*/ - for (i = 0; i < 4; i++) - sdvo_priv->in_out_map[i] = byArgs[0]; - - psb_intel_sdvo_write_cmd(output, SDVO_CMD_SET_IN_OUT_MAP, byArgs, 4); - status = psb_intel_sdvo_read_response(output, NULL, 0); - - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - return true; -} - - -static void psb_intel_sdvo_set_iomap(struct psb_intel_output *output) -{ - u32 dwCurrentSDVOIn0 = 0; - u32 dwCurrentSDVOIn1 = 0; - u32 dwDevMask = 0; - - - struct psb_intel_sdvo_priv *sdvo_priv = output->dev_priv; - - /* Please DO NOT change the following code. */ - /* SDVOB_IN0 or SDVOB_IN1 ==> sdvo_in0 */ - /* SDVOC_IN0 or SDVOC_IN1 ==> sdvo_in1 */ - if (sdvo_priv->by_input_wiring & (SDVOB_IN0 | SDVOC_IN0)) { - switch (sdvo_priv->active_device) { - case SDVO_DEVICE_LVDS: - dwDevMask = SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1; - break; - case SDVO_DEVICE_TMDS: - dwDevMask = SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1; - break; - case SDVO_DEVICE_TV: - dwDevMask = - SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_SVID0 | - SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_YPRPB1 | - SDVO_OUTPUT_SVID1 | SDVO_OUTPUT_CVBS1 | - SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1; - break; - case SDVO_DEVICE_CRT: - dwDevMask = SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1; - break; - } - dwCurrentSDVOIn0 = (sdvo_priv->active_outputs & dwDevMask); - } else if (sdvo_priv->by_input_wiring & (SDVOB_IN1 | SDVOC_IN1)) { - switch (sdvo_priv->active_device) { - case SDVO_DEVICE_LVDS: - dwDevMask = SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1; - break; - case SDVO_DEVICE_TMDS: - dwDevMask = SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1; - break; - case SDVO_DEVICE_TV: - dwDevMask = - SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_SVID0 | - SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_YPRPB1 | - SDVO_OUTPUT_SVID1 | SDVO_OUTPUT_CVBS1 | - SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1; - break; - case SDVO_DEVICE_CRT: - dwDevMask = SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1; - break; - } - dwCurrentSDVOIn1 = (sdvo_priv->active_outputs & dwDevMask); - } - - psb_sdvo_set_current_inoutmap(output, dwCurrentSDVOIn0, - dwCurrentSDVOIn1); -} - - -static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - /* Make the CRTC code factor in the SDVO pixel multiplier. The SDVO - * device will be told of the multiplier during mode_set. - */ - adjusted_mode->clock *= psb_intel_sdvo_get_pixel_multiplier(mode); - return true; -} - -static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct drm_crtc *crtc = encoder->crtc; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - struct psb_intel_output *psb_intel_output = - enc_to_psb_intel_output(encoder); - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - u16 width, height; - u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len; - u16 h_sync_offset, v_sync_offset; - u32 sdvox; - struct psb_intel_sdvo_dtd output_dtd; - int sdvo_pixel_multiply; - - if (!mode) - return; - - psb_intel_sdvo_set_target_output(psb_intel_output, 0); - - width = mode->crtc_hdisplay; - height = mode->crtc_vdisplay; - - /* do some mode translations */ - h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start; - h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; - - v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start; - v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; - - h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; - v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; - - output_dtd.part1.clock = mode->clock / 10; - output_dtd.part1.h_active = width & 0xff; - output_dtd.part1.h_blank = h_blank_len & 0xff; - output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) | - ((h_blank_len >> 8) & 0xf); - output_dtd.part1.v_active = height & 0xff; - output_dtd.part1.v_blank = v_blank_len & 0xff; - output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) | - ((v_blank_len >> 8) & 0xf); - - output_dtd.part2.h_sync_off = h_sync_offset; - output_dtd.part2.h_sync_width = h_sync_len & 0xff; - output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | - (v_sync_len & 0xf); - output_dtd.part2.sync_off_width_high = - ((h_sync_offset & 0x300) >> 2) | ((h_sync_len & 0x300) >> 4) | - ((v_sync_offset & 0x30) >> 2) | ((v_sync_len & 0x30) >> 4); - - output_dtd.part2.dtd_flags = 0x18; - if (mode->flags & DRM_MODE_FLAG_PHSYNC) - output_dtd.part2.dtd_flags |= 0x2; - if (mode->flags & DRM_MODE_FLAG_PVSYNC) - output_dtd.part2.dtd_flags |= 0x4; - - output_dtd.part2.sdvo_flags = 0; - output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0; - output_dtd.part2.reserved = 0; - - /* Set the output timing to the screen */ - psb_intel_sdvo_set_target_output(psb_intel_output, - sdvo_priv->active_outputs); - - /* Set the input timing to the screen. Assume always input 0. */ - psb_intel_sdvo_set_target_input(psb_intel_output, true, false); - - psb_intel_sdvo_set_output_timing(psb_intel_output, &output_dtd); - - /* We would like to use i830_sdvo_create_preferred_input_timing() to - * provide the device with a timing it can support, if it supports that - * feature. However, presumably we would need to adjust the CRTC to - * output the preferred timing, and we don't support that currently. - */ - psb_intel_sdvo_set_input_timing(psb_intel_output, &output_dtd); - - switch (psb_intel_sdvo_get_pixel_multiplier(mode)) { - case 1: - psb_intel_sdvo_set_clock_rate_mult(psb_intel_output, - SDVO_CLOCK_RATE_MULT_1X); - break; - case 2: - psb_intel_sdvo_set_clock_rate_mult(psb_intel_output, - SDVO_CLOCK_RATE_MULT_2X); - break; - case 4: - psb_intel_sdvo_set_clock_rate_mult(psb_intel_output, - SDVO_CLOCK_RATE_MULT_4X); - break; - } - - /* Set the SDVO control regs. */ - sdvox = REG_READ(sdvo_priv->output_device); - switch (sdvo_priv->output_device) { - case SDVOB: - sdvox &= SDVOB_PRESERVE_MASK; - break; - case SDVOC: - sdvox &= SDVOC_PRESERVE_MASK; - break; - } - sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; - if (psb_intel_crtc->pipe == 1) - sdvox |= SDVO_PIPE_B_SELECT; - - sdvo_pixel_multiply = psb_intel_sdvo_get_pixel_multiplier(mode); - - psb_intel_sdvo_write_sdvox(psb_intel_output, sdvox); - - psb_intel_sdvo_set_iomap(psb_intel_output); -} - -static void psb_intel_sdvo_dpms(struct drm_encoder *encoder, int mode) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *psb_intel_output = - enc_to_psb_intel_output(encoder); - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - u32 temp; - - if (mode != DRM_MODE_DPMS_ON) { - psb_intel_sdvo_set_active_outputs(psb_intel_output, 0); - if (0) - psb_intel_sdvo_set_encoder_power_state( - psb_intel_output, - mode); - - if (mode == DRM_MODE_DPMS_OFF) { - temp = REG_READ(sdvo_priv->output_device); - if ((temp & SDVO_ENABLE) != 0) { - psb_intel_sdvo_write_sdvox(psb_intel_output, - temp & - ~SDVO_ENABLE); - } - } - } else { - bool input1, input2; - int i; - u8 status; - - temp = REG_READ(sdvo_priv->output_device); - if ((temp & SDVO_ENABLE) == 0) - psb_intel_sdvo_write_sdvox(psb_intel_output, - temp | SDVO_ENABLE); - for (i = 0; i < 2; i++) - psb_intel_wait_for_vblank(dev); - - status = - psb_intel_sdvo_get_trained_inputs(psb_intel_output, - &input1, - &input2); - - - /* Warn if the device reported failure to sync. - * A lot of SDVO devices fail to notify of sync, but it's - * a given it the status is a success, we succeeded. - */ - if (status == SDVO_CMD_STATUS_SUCCESS && !input1) { - DRM_DEBUG - ("First %s output reported failure to sync\n", - SDVO_NAME(sdvo_priv)); - } - - if (0) - psb_intel_sdvo_set_encoder_power_state( - psb_intel_output, - mode); - psb_intel_sdvo_set_active_outputs(psb_intel_output, - sdvo_priv->active_outputs); - } - return; -} - -static void psb_intel_sdvo_save(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - /*int o;*/ - - sdvo_priv->save_sdvo_mult = - psb_intel_sdvo_get_clock_rate_mult(psb_intel_output); - psb_intel_sdvo_get_active_outputs(psb_intel_output, - &sdvo_priv->save_active_outputs); - - if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { - psb_intel_sdvo_set_target_input(psb_intel_output, - true, - false); - psb_intel_sdvo_get_input_timing(psb_intel_output, - &sdvo_priv->save_input_dtd_1); - } - - if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { - psb_intel_sdvo_set_target_input(psb_intel_output, - false, - true); - psb_intel_sdvo_get_input_timing(psb_intel_output, - &sdvo_priv->save_input_dtd_2); - } - sdvo_priv->save_SDVOX = REG_READ(sdvo_priv->output_device); - - /*TODO: save the in_out_map state*/ -} - -static void psb_intel_sdvo_restore(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - /*int o;*/ - int i; - bool input1, input2; - u8 status; - - psb_intel_sdvo_set_active_outputs(psb_intel_output, 0); - - if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { - psb_intel_sdvo_set_target_input(psb_intel_output, true, false); - psb_intel_sdvo_set_input_timing(psb_intel_output, - &sdvo_priv->save_input_dtd_1); - } - - if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { - psb_intel_sdvo_set_target_input(psb_intel_output, false, true); - psb_intel_sdvo_set_input_timing(psb_intel_output, - &sdvo_priv->save_input_dtd_2); - } - - psb_intel_sdvo_set_clock_rate_mult(psb_intel_output, - sdvo_priv->save_sdvo_mult); - - REG_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX); - - if (sdvo_priv->save_SDVOX & SDVO_ENABLE) { - for (i = 0; i < 2; i++) - psb_intel_wait_for_vblank(dev); - status = - psb_intel_sdvo_get_trained_inputs(psb_intel_output, - &input1, - &input2); - if (status == SDVO_CMD_STATUS_SUCCESS && !input1) - DRM_DEBUG - ("First %s output reported failure to sync\n", - SDVO_NAME(sdvo_priv)); - } - - psb_intel_sdvo_set_active_outputs(psb_intel_output, - sdvo_priv->save_active_outputs); - - /*TODO: restore in_out_map*/ - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_SET_IN_OUT_MAP, - sdvo_priv->in_out_map, - 4); - - psb_intel_sdvo_read_response(psb_intel_output, NULL, 0); -} - -static int psb_intel_sdvo_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv; - - if (mode->flags & DRM_MODE_FLAG_DBLSCAN) - return MODE_NO_DBLESCAN; - - if (sdvo_priv->pixel_clock_min > mode->clock) - return MODE_CLOCK_LOW; - - if (sdvo_priv->pixel_clock_max < mode->clock) - return MODE_CLOCK_HIGH; - - return MODE_OK; -} - -static bool psb_intel_sdvo_get_capabilities( - struct psb_intel_output *psb_intel_output, - struct psb_intel_sdvo_caps *caps) -{ - u8 status; - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_GET_DEVICE_CAPS, - NULL, - 0); - status = psb_intel_sdvo_read_response(psb_intel_output, - caps, - sizeof(*caps)); - if (status != SDVO_CMD_STATUS_SUCCESS) - return false; - - return true; -} - -struct drm_connector *psb_intel_sdvo_find(struct drm_device *dev, int sdvoB) -{ - struct drm_connector *connector = NULL; - struct psb_intel_output *iout = NULL; - struct psb_intel_sdvo_priv *sdvo; - - /* find the sdvo connector */ - list_for_each_entry(connector, &dev->mode_config.connector_list, - head) { - iout = to_psb_intel_output(connector); - - if (iout->type != INTEL_OUTPUT_SDVO) - continue; - - sdvo = iout->dev_priv; - - if (sdvo->output_device == SDVOB && sdvoB) - return connector; - - if (sdvo->output_device == SDVOC && !sdvoB) - return connector; - - } - - return NULL; -} - -int psb_intel_sdvo_supports_hotplug(struct drm_connector *connector) -{ - u8 response[2]; - u8 status; - struct psb_intel_output *psb_intel_output; - - if (!connector) - return 0; - - psb_intel_output = to_psb_intel_output(connector); - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_GET_HOT_PLUG_SUPPORT, - NULL, - 0); - status = psb_intel_sdvo_read_response(psb_intel_output, - &response, - 2); - - if (response[0] != 0) - return 1; - - return 0; -} - -void psb_intel_sdvo_set_hotplug(struct drm_connector *connector, int on) -{ - u8 response[2]; - u8 status; - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_GET_ACTIVE_HOT_PLUG, - NULL, - 0); - psb_intel_sdvo_read_response(psb_intel_output, &response, 2); - - if (on) { - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, - 0); - status = psb_intel_sdvo_read_response(psb_intel_output, - &response, - 2); - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_SET_ACTIVE_HOT_PLUG, - &response, 2); - } else { - response[0] = 0; - response[1] = 0; - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_SET_ACTIVE_HOT_PLUG, - &response, 2); - } - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_GET_ACTIVE_HOT_PLUG, - NULL, - 0); - psb_intel_sdvo_read_response(psb_intel_output, &response, 2); -} - -static enum drm_connector_status psb_intel_sdvo_detect(struct drm_connector - *connector, bool force) -{ - u8 response[2]; - u8 status; - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - psb_intel_sdvo_write_cmd(psb_intel_output, - SDVO_CMD_GET_ATTACHED_DISPLAYS, - NULL, - 0); - status = psb_intel_sdvo_read_response(psb_intel_output, &response, 2); - - DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]); - if ((response[0] != 0) || (response[1] != 0)) - return connector_status_connected; - else - return connector_status_disconnected; -} - -static int psb_intel_sdvo_get_modes(struct drm_connector *connector) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - /* set the bus switch and get the modes */ - psb_intel_sdvo_set_control_bus_switch(psb_intel_output, - SDVO_CONTROL_BUS_DDC2); - psb_intel_ddc_get_modes(psb_intel_output); - - if (list_empty(&connector->probed_modes)) - return 0; - return 1; -} - -static void psb_intel_sdvo_destroy(struct drm_connector *connector) -{ - struct psb_intel_output *psb_intel_output = - to_psb_intel_output(connector); - - if (psb_intel_output->i2c_bus) - psb_intel_i2c_destroy(psb_intel_output->i2c_bus); - drm_sysfs_connector_remove(connector); - drm_connector_cleanup(connector); - kfree(psb_intel_output); -} - -static const struct drm_encoder_helper_funcs psb_intel_sdvo_helper_funcs = { - .dpms = psb_intel_sdvo_dpms, - .mode_fixup = psb_intel_sdvo_mode_fixup, - .prepare = psb_intel_encoder_prepare, - .mode_set = psb_intel_sdvo_mode_set, - .commit = psb_intel_encoder_commit, -}; - -static const struct drm_connector_funcs psb_intel_sdvo_connector_funcs = { - .dpms = drm_helper_connector_dpms, - .save = psb_intel_sdvo_save, - .restore = psb_intel_sdvo_restore, - .detect = psb_intel_sdvo_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = psb_intel_sdvo_destroy, -}; - -static const struct drm_connector_helper_funcs - psb_intel_sdvo_connector_helper_funcs = { - .get_modes = psb_intel_sdvo_get_modes, - .mode_valid = psb_intel_sdvo_mode_valid, - .best_encoder = psb_intel_best_encoder, -}; - -void psb_intel_sdvo_enc_destroy(struct drm_encoder *encoder) -{ - drm_encoder_cleanup(encoder); -} - -static const struct drm_encoder_funcs psb_intel_sdvo_enc_funcs = { - .destroy = psb_intel_sdvo_enc_destroy, -}; - - -void psb_intel_sdvo_init(struct drm_device *dev, int output_device) -{ - struct drm_connector *connector; - struct psb_intel_output *psb_intel_output; - struct psb_intel_sdvo_priv *sdvo_priv; - struct psb_intel_i2c_chan *i2cbus = NULL; - int connector_type; - u8 ch[0x40]; - int i; - int encoder_type, output_id; - - psb_intel_output = - kcalloc(sizeof(struct psb_intel_output) + - sizeof(struct psb_intel_sdvo_priv), 1, GFP_KERNEL); - if (!psb_intel_output) - return; - - connector = &psb_intel_output->base; - - drm_connector_init(dev, connector, &psb_intel_sdvo_connector_funcs, - DRM_MODE_CONNECTOR_Unknown); - drm_connector_helper_add(connector, - &psb_intel_sdvo_connector_helper_funcs); - sdvo_priv = (struct psb_intel_sdvo_priv *) (psb_intel_output + 1); - psb_intel_output->type = INTEL_OUTPUT_SDVO; - - connector->interlace_allowed = 0; - connector->doublescan_allowed = 0; - - /* setup the DDC bus. */ - if (output_device == SDVOB) - i2cbus = - psb_intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); - else - i2cbus = - psb_intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); - - if (!i2cbus) - goto err_connector; - - sdvo_priv->i2c_bus = i2cbus; - - if (output_device == SDVOB) { - output_id = 1; - sdvo_priv->by_input_wiring = SDVOB_IN0; - sdvo_priv->i2c_bus->slave_addr = 0x38; - } else { - output_id = 2; - sdvo_priv->i2c_bus->slave_addr = 0x39; - } - - sdvo_priv->output_device = output_device; - psb_intel_output->i2c_bus = i2cbus; - psb_intel_output->dev_priv = sdvo_priv; - - - /* Read the regs to test if we can talk to the device */ - for (i = 0; i < 0x40; i++) { - if (!psb_intel_sdvo_read_byte(psb_intel_output, i, &ch[i])) { - dev_dbg(dev->dev, "No SDVO device found on SDVO%c\n", - output_device == SDVOB ? 'B' : 'C'); - goto err_i2c; - } - } - - psb_intel_sdvo_get_capabilities(psb_intel_output, &sdvo_priv->caps); - - memset(&sdvo_priv->active_outputs, 0, - sizeof(sdvo_priv->active_outputs)); - - /* TODO, CVBS, SVID, YPRPB & SCART outputs. */ - if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) { - sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0; - sdvo_priv->active_device = SDVO_DEVICE_CRT; - connector->display_info.subpixel_order = - SubPixelHorizontalRGB; - encoder_type = DRM_MODE_ENCODER_DAC; - connector_type = DRM_MODE_CONNECTOR_VGA; - } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) { - sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1; - sdvo_priv->active_outputs = SDVO_DEVICE_CRT; - connector->display_info.subpixel_order = - SubPixelHorizontalRGB; - encoder_type = DRM_MODE_ENCODER_DAC; - connector_type = DRM_MODE_CONNECTOR_VGA; - } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) { - sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0; - sdvo_priv->active_device = SDVO_DEVICE_TMDS; - connector->display_info.subpixel_order = - SubPixelHorizontalRGB; - encoder_type = DRM_MODE_ENCODER_TMDS; - connector_type = DRM_MODE_CONNECTOR_DVID; - } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) { - sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1; - sdvo_priv->active_device = SDVO_DEVICE_TMDS; - connector->display_info.subpixel_order = - SubPixelHorizontalRGB; - encoder_type = DRM_MODE_ENCODER_TMDS; - connector_type = DRM_MODE_CONNECTOR_DVID; - } else { - unsigned char bytes[2]; - - memcpy(bytes, &sdvo_priv->caps.output_flags, 2); - dev_dbg(dev->dev, "%s: No active RGB or TMDS outputs (0x%02x%02x)\n", - SDVO_NAME(sdvo_priv), bytes[0], bytes[1]); - goto err_i2c; - } - - drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_sdvo_enc_funcs, - encoder_type); - drm_encoder_helper_add(&psb_intel_output->enc, - &psb_intel_sdvo_helper_funcs); - connector->connector_type = connector_type; - - drm_mode_connector_attach_encoder(&psb_intel_output->base, - &psb_intel_output->enc); - drm_sysfs_connector_add(connector); - - /* Set the input timing to the screen. Assume always input 0. */ - psb_intel_sdvo_set_target_input(psb_intel_output, true, false); - - psb_intel_sdvo_get_input_pixel_clock_range(psb_intel_output, - &sdvo_priv->pixel_clock_min, - &sdvo_priv-> - pixel_clock_max); - - - dev_dbg(dev->dev, "%s device VID/DID: %02X:%02X.%02X, " - "clock range %dMHz - %dMHz, " - "input 1: %c, input 2: %c, " - "output 1: %c, output 2: %c\n", - SDVO_NAME(sdvo_priv), - sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id, - sdvo_priv->caps.device_rev_id, - sdvo_priv->pixel_clock_min / 1000, - sdvo_priv->pixel_clock_max / 1000, - (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', - (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', - /* check currently supported outputs */ - sdvo_priv->caps.output_flags & - (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N', - sdvo_priv->caps.output_flags & - (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); - - psb_intel_output->ddc_bus = i2cbus; - - return; - -err_i2c: - psb_intel_i2c_destroy(psb_intel_output->i2c_bus); -err_connector: - drm_connector_cleanup(connector); - kfree(psb_intel_output); - - return; -} diff --git a/drivers/staging/gma500/psb_intel_sdvo_regs.h b/drivers/staging/gma500/psb_intel_sdvo_regs.h deleted file mode 100644 index 96862ea65aba..000000000000 --- a/drivers/staging/gma500/psb_intel_sdvo_regs.h +++ /dev/null @@ -1,338 +0,0 @@ -/* - * SDVO command definitions and structures. - * - * Copyright (c) 2008, Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt - */ - -#define SDVO_OUTPUT_FIRST (0) -#define SDVO_OUTPUT_TMDS0 (1 << 0) -#define SDVO_OUTPUT_RGB0 (1 << 1) -#define SDVO_OUTPUT_CVBS0 (1 << 2) -#define SDVO_OUTPUT_SVID0 (1 << 3) -#define SDVO_OUTPUT_YPRPB0 (1 << 4) -#define SDVO_OUTPUT_SCART0 (1 << 5) -#define SDVO_OUTPUT_LVDS0 (1 << 6) -#define SDVO_OUTPUT_TMDS1 (1 << 8) -#define SDVO_OUTPUT_RGB1 (1 << 9) -#define SDVO_OUTPUT_CVBS1 (1 << 10) -#define SDVO_OUTPUT_SVID1 (1 << 11) -#define SDVO_OUTPUT_YPRPB1 (1 << 12) -#define SDVO_OUTPUT_SCART1 (1 << 13) -#define SDVO_OUTPUT_LVDS1 (1 << 14) -#define SDVO_OUTPUT_LAST (14) - -struct psb_intel_sdvo_caps { - u8 vendor_id; - u8 device_id; - u8 device_rev_id; - u8 sdvo_version_major; - u8 sdvo_version_minor; - unsigned int sdvo_inputs_mask:2; - unsigned int smooth_scaling:1; - unsigned int sharp_scaling:1; - unsigned int up_scaling:1; - unsigned int down_scaling:1; - unsigned int stall_support:1; - unsigned int pad:1; - u16 output_flags; -} __packed; - -/** This matches the EDID DTD structure, more or less */ -struct psb_intel_sdvo_dtd { - struct { - u16 clock; /**< pixel clock, in 10kHz units */ - u8 h_active; /**< lower 8 bits (pixels) */ - u8 h_blank; /**< lower 8 bits (pixels) */ - u8 h_high; /**< upper 4 bits each h_active, h_blank */ - u8 v_active; /**< lower 8 bits (lines) */ - u8 v_blank; /**< lower 8 bits (lines) */ - u8 v_high; /**< upper 4 bits each v_active, v_blank */ - } part1; - - struct { - u8 h_sync_off; - /**< lower 8 bits, from hblank start */ - u8 h_sync_width;/**< lower 8 bits (pixels) */ - /** lower 4 bits each vsync offset, vsync width */ - u8 v_sync_off_width; - /** - * 2 high bits of hsync offset, 2 high bits of hsync width, - * bits 4-5 of vsync offset, and 2 high bits of vsync width. - */ - u8 sync_off_width_high; - u8 dtd_flags; - u8 sdvo_flags; - /** bits 6-7 of vsync offset at bits 6-7 */ - u8 v_sync_off_high; - u8 reserved; - } part2; -} __packed; - -struct psb_intel_sdvo_pixel_clock_range { - u16 min; /**< pixel clock, in 10kHz units */ - u16 max; /**< pixel clock, in 10kHz units */ -} __packed; - -struct psb_intel_sdvo_preferred_input_timing_args { - u16 clock; - u16 width; - u16 height; -} __packed; - -/* I2C registers for SDVO */ -#define SDVO_I2C_ARG_0 0x07 -#define SDVO_I2C_ARG_1 0x06 -#define SDVO_I2C_ARG_2 0x05 -#define SDVO_I2C_ARG_3 0x04 -#define SDVO_I2C_ARG_4 0x03 -#define SDVO_I2C_ARG_5 0x02 -#define SDVO_I2C_ARG_6 0x01 -#define SDVO_I2C_ARG_7 0x00 -#define SDVO_I2C_OPCODE 0x08 -#define SDVO_I2C_CMD_STATUS 0x09 -#define SDVO_I2C_RETURN_0 0x0a -#define SDVO_I2C_RETURN_1 0x0b -#define SDVO_I2C_RETURN_2 0x0c -#define SDVO_I2C_RETURN_3 0x0d -#define SDVO_I2C_RETURN_4 0x0e -#define SDVO_I2C_RETURN_5 0x0f -#define SDVO_I2C_RETURN_6 0x10 -#define SDVO_I2C_RETURN_7 0x11 -#define SDVO_I2C_VENDOR_BEGIN 0x20 - -/* Status results */ -#define SDVO_CMD_STATUS_POWER_ON 0x0 -#define SDVO_CMD_STATUS_SUCCESS 0x1 -#define SDVO_CMD_STATUS_NOTSUPP 0x2 -#define SDVO_CMD_STATUS_INVALID_ARG 0x3 -#define SDVO_CMD_STATUS_PENDING 0x4 -#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED 0x5 -#define SDVO_CMD_STATUS_SCALING_NOT_SUPP 0x6 - -/* SDVO commands, argument/result registers */ - -#define SDVO_CMD_RESET 0x01 - -/** Returns a struct psb_intel_sdvo_caps */ -#define SDVO_CMD_GET_DEVICE_CAPS 0x02 - -#define SDVO_CMD_GET_FIRMWARE_REV 0x86 -# define SDVO_DEVICE_FIRMWARE_MINOR SDVO_I2C_RETURN_0 -# define SDVO_DEVICE_FIRMWARE_MAJOR SDVO_I2C_RETURN_1 -# define SDVO_DEVICE_FIRMWARE_PATCH SDVO_I2C_RETURN_2 - -/** - * Reports which inputs are trained (managed to sync). - * - * Devices must have trained within 2 vsyncs of a mode change. - */ -#define SDVO_CMD_GET_TRAINED_INPUTS 0x03 -struct psb_intel_sdvo_get_trained_inputs_response { - unsigned int input0_trained:1; - unsigned int input1_trained:1; - unsigned int pad:6; -} __packed; - -/** Returns a struct psb_intel_sdvo_output_flags of active outputs. */ -#define SDVO_CMD_GET_ACTIVE_OUTPUTS 0x04 - -/** - * Sets the current set of active outputs. - * - * Takes a struct psb_intel_sdvo_output_flags. - * Must be preceded by a SET_IN_OUT_MAP - * on multi-output devices. - */ -#define SDVO_CMD_SET_ACTIVE_OUTPUTS 0x05 - -/** - * Returns the current mapping of SDVO inputs to outputs on the device. - * - * Returns two struct psb_intel_sdvo_output_flags structures. - */ -#define SDVO_CMD_GET_IN_OUT_MAP 0x06 - -/** - * Sets the current mapping of SDVO inputs to outputs on the device. - * - * Takes two struct i380_sdvo_output_flags structures. - */ -#define SDVO_CMD_SET_IN_OUT_MAP 0x07 - -/** - * Returns a struct psb_intel_sdvo_output_flags of attached displays. - */ -#define SDVO_CMD_GET_ATTACHED_DISPLAYS 0x0b - -/** - * Returns a struct psb_intel_sdvo_ouptut_flags of displays supporting hot plugging. - */ -#define SDVO_CMD_GET_HOT_PLUG_SUPPORT 0x0c - -/** - * Takes a struct psb_intel_sdvo_output_flags. - */ -#define SDVO_CMD_SET_ACTIVE_HOT_PLUG 0x0d - -/** - * Returns a struct psb_intel_sdvo_output_flags of displays with hot plug - * interrupts enabled. - */ -#define SDVO_CMD_GET_ACTIVE_HOT_PLUG 0x0e - -#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f -struct psb_intel_sdvo_get_interrupt_event_source_response { - u16 interrupt_status; - unsigned int ambient_light_interrupt:1; - unsigned int pad:7; -} __packed; - -/** - * Selects which input is affected by future input commands. - * - * Commands affected include SET_INPUT_TIMINGS_PART[12], - * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12], - * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS. - */ -#define SDVO_CMD_SET_TARGET_INPUT 0x10 -struct psb_intel_sdvo_set_target_input_args { - unsigned int target_1:1; - unsigned int pad:7; -} __packed; - -/** - * Takes a struct psb_intel_sdvo_output_flags of which outputs are targeted by - * future output commands. - * - * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12], - * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE. - */ -#define SDVO_CMD_SET_TARGET_OUTPUT 0x11 - -#define SDVO_CMD_GET_INPUT_TIMINGS_PART1 0x12 -#define SDVO_CMD_GET_INPUT_TIMINGS_PART2 0x13 -#define SDVO_CMD_SET_INPUT_TIMINGS_PART1 0x14 -#define SDVO_CMD_SET_INPUT_TIMINGS_PART2 0x15 -#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1 0x16 -#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2 0x17 -#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1 0x18 -#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2 0x19 -/* Part 1 */ -# define SDVO_DTD_CLOCK_LOW SDVO_I2C_ARG_0 -# define SDVO_DTD_CLOCK_HIGH SDVO_I2C_ARG_1 -# define SDVO_DTD_H_ACTIVE SDVO_I2C_ARG_2 -# define SDVO_DTD_H_BLANK SDVO_I2C_ARG_3 -# define SDVO_DTD_H_HIGH SDVO_I2C_ARG_4 -# define SDVO_DTD_V_ACTIVE SDVO_I2C_ARG_5 -# define SDVO_DTD_V_BLANK SDVO_I2C_ARG_6 -# define SDVO_DTD_V_HIGH SDVO_I2C_ARG_7 -/* Part 2 */ -# define SDVO_DTD_HSYNC_OFF SDVO_I2C_ARG_0 -# define SDVO_DTD_HSYNC_WIDTH SDVO_I2C_ARG_1 -# define SDVO_DTD_VSYNC_OFF_WIDTH SDVO_I2C_ARG_2 -# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH SDVO_I2C_ARG_3 -# define SDVO_DTD_DTD_FLAGS SDVO_I2C_ARG_4 -# define SDVO_DTD_DTD_FLAG_INTERLACED (1 << 7) -# define SDVO_DTD_DTD_FLAG_STEREO_MASK (3 << 5) -# define SDVO_DTD_DTD_FLAG_INPUT_MASK (3 << 3) -# define SDVO_DTD_DTD_FLAG_SYNC_MASK (3 << 1) -# define SDVO_DTD_SDVO_FLAS SDVO_I2C_ARG_5 -# define SDVO_DTD_SDVO_FLAG_STALL (1 << 7) -# define SDVO_DTD_SDVO_FLAG_CENTERED (0 << 6) -# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT (1 << 6) -# define SDVO_DTD_SDVO_FLAG_SCALING_MASK (3 << 4) -# define SDVO_DTD_SDVO_FLAG_SCALING_NONE (0 << 4) -# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP (1 << 4) -# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH (2 << 4) -# define SDVO_DTD_VSYNC_OFF_HIGH SDVO_I2C_ARG_6 - -/** - * Generates a DTD based on the given width, height, and flags. - * - * This will be supported by any device supporting scaling or interlaced - * modes. - */ -#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING 0x1a -# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW SDVO_I2C_ARG_0 -# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH SDVO_I2C_ARG_1 -# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW SDVO_I2C_ARG_2 -# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH SDVO_I2C_ARG_3 -# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW SDVO_I2C_ARG_4 -# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH SDVO_I2C_ARG_5 -# define SDVO_PREFERRED_INPUT_TIMING_FLAGS SDVO_I2C_ARG_6 -# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED (1 << 0) -# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED (1 << 1) - -#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1 0x1b -#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2 0x1c - -/** Returns a struct psb_intel_sdvo_pixel_clock_range */ -#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE 0x1d -/** Returns a struct psb_intel_sdvo_pixel_clock_range */ -#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE 0x1e - -/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */ -#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS 0x1f - -/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ -#define SDVO_CMD_GET_CLOCK_RATE_MULT 0x20 -/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ -#define SDVO_CMD_SET_CLOCK_RATE_MULT 0x21 -# define SDVO_CLOCK_RATE_MULT_1X (1 << 0) -# define SDVO_CLOCK_RATE_MULT_2X (1 << 1) -# define SDVO_CLOCK_RATE_MULT_4X (1 << 3) - -#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27 - -#define SDVO_CMD_GET_TV_FORMAT 0x28 - -#define SDVO_CMD_SET_TV_FORMAT 0x29 - -#define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a -#define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b -#define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c -# define SDVO_ENCODER_STATE_ON (1 << 0) -# define SDVO_ENCODER_STATE_STANDBY (1 << 1) -# define SDVO_ENCODER_STATE_SUSPEND (1 << 2) -# define SDVO_ENCODER_STATE_OFF (1 << 3) - -#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT 0x93 - -#define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a -# define SDVO_CONTROL_BUS_PROM 0x0 -# define SDVO_CONTROL_BUS_DDC1 0x1 -# define SDVO_CONTROL_BUS_DDC2 0x2 -# define SDVO_CONTROL_BUS_DDC3 0x3 - -/* SDVO Bus & SDVO Inputs wiring details*/ -/* Bit 0: Is SDVOB connected to In0 (1 = yes, 0 = no*/ -/* Bit 1: Is SDVOB connected to In1 (1 = yes, 0 = no*/ -/* Bit 2: Is SDVOC connected to In0 (1 = yes, 0 = no*/ -/* Bit 3: Is SDVOC connected to In1 (1 = yes, 0 = no*/ -#define SDVOB_IN0 0x01 -#define SDVOB_IN1 0x02 -#define SDVOC_IN0 0x04 -#define SDVOC_IN1 0x08 - -#define SDVO_DEVICE_NONE 0x00 -#define SDVO_DEVICE_CRT 0x01 -#define SDVO_DEVICE_TV 0x02 -#define SDVO_DEVICE_LVDS 0x04 -#define SDVO_DEVICE_TMDS 0x08 - diff --git a/drivers/staging/gma500/psb_irq.c b/drivers/staging/gma500/psb_irq.c deleted file mode 100644 index 36dd63044b06..000000000000 --- a/drivers/staging/gma500/psb_irq.c +++ /dev/null @@ -1,627 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to - * develop this driver. - * - **************************************************************************/ -/* - */ - -#include -#include "psb_drv.h" -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include "power.h" -#include "mdfld_output.h" - -/* - * inline functions - */ - -static inline u32 -psb_pipestat(int pipe) -{ - if (pipe == 0) - return PIPEASTAT; - if (pipe == 1) - return PIPEBSTAT; - if (pipe == 2) - return PIPECSTAT; - BUG(); -} - -static inline u32 -mid_pipe_event(int pipe) -{ - if (pipe == 0) - return _PSB_PIPEA_EVENT_FLAG; - if (pipe == 1) - return _MDFLD_PIPEB_EVENT_FLAG; - if (pipe == 2) - return _MDFLD_PIPEC_EVENT_FLAG; - BUG(); -} - -static inline u32 -mid_pipe_vsync(int pipe) -{ - if (pipe == 0) - return _PSB_VSYNC_PIPEA_FLAG; - if (pipe == 1) - return _PSB_VSYNC_PIPEB_FLAG; - if (pipe == 2) - return _MDFLD_PIPEC_VBLANK_FLAG; - BUG(); -} - -static inline u32 -mid_pipeconf(int pipe) -{ - if (pipe == 0) - return PIPEACONF; - if (pipe == 1) - return PIPEBCONF; - if (pipe == 2) - return PIPECCONF; - BUG(); -} - -void -psb_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask) -{ - if ((dev_priv->pipestat[pipe] & mask) != mask) { - u32 reg = psb_pipestat(pipe); - dev_priv->pipestat[pipe] |= mask; - /* Enable the interrupt, clear any pending status */ - if (gma_power_begin(dev_priv->dev, false)) { - u32 writeVal = PSB_RVDC32(reg); - writeVal |= (mask | (mask >> 16)); - PSB_WVDC32(writeVal, reg); - (void) PSB_RVDC32(reg); - gma_power_end(dev_priv->dev); - } - } -} - -void -psb_disable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask) -{ - if ((dev_priv->pipestat[pipe] & mask) != 0) { - u32 reg = psb_pipestat(pipe); - dev_priv->pipestat[pipe] &= ~mask; - if (gma_power_begin(dev_priv->dev, false)) { - u32 writeVal = PSB_RVDC32(reg); - writeVal &= ~mask; - PSB_WVDC32(writeVal, reg); - (void) PSB_RVDC32(reg); - gma_power_end(dev_priv->dev); - } - } -} - -void mid_enable_pipe_event(struct drm_psb_private *dev_priv, int pipe) -{ - if (gma_power_begin(dev_priv->dev, false)) { - u32 pipe_event = mid_pipe_event(pipe); - dev_priv->vdc_irq_mask |= pipe_event; - PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); - PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); - gma_power_end(dev_priv->dev); - } -} - -void mid_disable_pipe_event(struct drm_psb_private *dev_priv, int pipe) -{ - if (dev_priv->pipestat[pipe] == 0) { - if (gma_power_begin(dev_priv->dev, false)) { - u32 pipe_event = mid_pipe_event(pipe); - dev_priv->vdc_irq_mask &= ~pipe_event; - PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); - PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); - gma_power_end(dev_priv->dev); - } - } -} - -/** - * Display controller interrupt handler for pipe event. - * - */ -static void mid_pipe_event_handler(struct drm_device *dev, int pipe) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - - uint32_t pipe_stat_val = 0; - uint32_t pipe_stat_reg = psb_pipestat(pipe); - uint32_t pipe_enable = dev_priv->pipestat[pipe]; - uint32_t pipe_status = dev_priv->pipestat[pipe] >> 16; - uint32_t pipe_clear; - uint32_t i = 0; - - spin_lock(&dev_priv->irqmask_lock); - - pipe_stat_val = PSB_RVDC32(pipe_stat_reg); - pipe_stat_val &= pipe_enable | pipe_status; - pipe_stat_val &= pipe_stat_val >> 16; - - spin_unlock(&dev_priv->irqmask_lock); - - /* Clear the 2nd level interrupt status bits - * Sometimes the bits are very sticky so we repeat until they unstick */ - for (i = 0; i < 0xffff; i++) { - PSB_WVDC32(PSB_RVDC32(pipe_stat_reg), pipe_stat_reg); - pipe_clear = PSB_RVDC32(pipe_stat_reg) & pipe_status; - - if (pipe_clear == 0) - break; - } - - if (pipe_clear) - dev_err(dev->dev, - "%s, can't clear status bits for pipe %d, its value = 0x%x.\n", - __func__, pipe, PSB_RVDC32(pipe_stat_reg)); - - if (pipe_stat_val & PIPE_VBLANK_STATUS) - drm_handle_vblank(dev, pipe); - - if (pipe_stat_val & PIPE_TE_STATUS) - drm_handle_vblank(dev, pipe); -} - -/* - * Display controller interrupt handler. - */ -static void psb_vdc_interrupt(struct drm_device *dev, uint32_t vdc_stat) -{ - if (vdc_stat & _PSB_VSYNC_PIPEA_FLAG) - mid_pipe_event_handler(dev, 0); - - if (vdc_stat & _PSB_VSYNC_PIPEB_FLAG) - mid_pipe_event_handler(dev, 1); -} - -irqreturn_t psb_irq_handler(DRM_IRQ_ARGS) -{ - struct drm_device *dev = (struct drm_device *) arg; - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - - uint32_t vdc_stat, dsp_int = 0, sgx_int = 0; - int handled = 0; - - spin_lock(&dev_priv->irqmask_lock); - - vdc_stat = PSB_RVDC32(PSB_INT_IDENTITY_R); - - if (vdc_stat & _PSB_PIPE_EVENT_FLAG) - dsp_int = 1; - - /* FIXME: Handle Medfield - if (vdc_stat & _MDFLD_DISP_ALL_IRQ_FLAG) - dsp_int = 1; - */ - - if (vdc_stat & _PSB_IRQ_SGX_FLAG) - sgx_int = 1; - - vdc_stat &= dev_priv->vdc_irq_mask; - spin_unlock(&dev_priv->irqmask_lock); - - if (dsp_int && gma_power_is_on(dev)) { - psb_vdc_interrupt(dev, vdc_stat); - handled = 1; - } - - if (sgx_int) { - /* Not expected - we have it masked, shut it up */ - u32 s, s2; - s = PSB_RSGX32(PSB_CR_EVENT_STATUS); - s2 = PSB_RSGX32(PSB_CR_EVENT_STATUS2); - PSB_WSGX32(s, PSB_CR_EVENT_HOST_CLEAR); - PSB_WSGX32(s2, PSB_CR_EVENT_HOST_CLEAR2); - /* if s & _PSB_CE_TWOD_COMPLETE we have 2D done but - we may as well poll even if we add that ! */ - handled = 1; - } - - PSB_WVDC32(vdc_stat, PSB_INT_IDENTITY_R); - (void) PSB_RVDC32(PSB_INT_IDENTITY_R); - DRM_READMEMORYBARRIER(); - - if (!handled) - return IRQ_NONE; - - return IRQ_HANDLED; -} - -void psb_irq_preinstall(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - unsigned long irqflags; - - spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); - - if (gma_power_is_on(dev)) - PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM); - if (dev->vblank_enabled[0]) - dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG; - if (dev->vblank_enabled[1]) - dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEB_FLAG; - - /* FIXME: Handle Medfield irq mask - if (dev->vblank_enabled[1]) - dev_priv->vdc_irq_mask |= _MDFLD_PIPEB_EVENT_FLAG; - if (dev->vblank_enabled[2]) - dev_priv->vdc_irq_mask |= _MDFLD_PIPEC_EVENT_FLAG; - */ - - /* This register is safe even if display island is off */ - PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); - spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); -} - -int psb_irq_postinstall(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - unsigned long irqflags; - - spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); - - /* This register is safe even if display island is off */ - PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); - PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM); - - if (dev->vblank_enabled[0]) - psb_enable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE); - else - psb_disable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE); - - if (dev->vblank_enabled[1]) - psb_enable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE); - else - psb_disable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE); - - if (dev->vblank_enabled[2]) - psb_enable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE); - else - psb_disable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE); - - spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); - return 0; -} - -void psb_irq_uninstall(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - unsigned long irqflags; - - spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); - - PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM); - - if (dev->vblank_enabled[0]) - psb_disable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE); - - if (dev->vblank_enabled[1]) - psb_disable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE); - - if (dev->vblank_enabled[2]) - psb_disable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE); - - dev_priv->vdc_irq_mask &= _PSB_IRQ_SGX_FLAG | - _PSB_IRQ_MSVDX_FLAG | - _LNC_IRQ_TOPAZ_FLAG; - - /* These two registers are safe even if display island is off */ - PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); - PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); - - wmb(); - - /* This register is safe even if display island is off */ - PSB_WVDC32(PSB_RVDC32(PSB_INT_IDENTITY_R), PSB_INT_IDENTITY_R); - spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); -} - -void psb_irq_turn_on_dpst(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - u32 hist_reg; - u32 pwm_reg; - - if (gma_power_begin(dev, false)) { - PSB_WVDC32(1 << 31, HISTOGRAM_LOGIC_CONTROL); - hist_reg = PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL); - PSB_WVDC32(1 << 31, HISTOGRAM_INT_CONTROL); - hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL); - - PSB_WVDC32(0x80010100, PWM_CONTROL_LOGIC); - pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC); - PSB_WVDC32(pwm_reg | PWM_PHASEIN_ENABLE - | PWM_PHASEIN_INT_ENABLE, - PWM_CONTROL_LOGIC); - pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC); - - psb_enable_pipestat(dev_priv, 0, PIPE_DPST_EVENT_ENABLE); - - hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL); - PSB_WVDC32(hist_reg | HISTOGRAM_INT_CTRL_CLEAR, - HISTOGRAM_INT_CONTROL); - pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC); - PSB_WVDC32(pwm_reg | 0x80010100 | PWM_PHASEIN_ENABLE, - PWM_CONTROL_LOGIC); - - gma_power_end(dev); - } -} - -int psb_irq_enable_dpst(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - unsigned long irqflags; - - spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); - - /* enable DPST */ - mid_enable_pipe_event(dev_priv, 0); - psb_irq_turn_on_dpst(dev); - - spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); - return 0; -} - -void psb_irq_turn_off_dpst(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - u32 hist_reg; - u32 pwm_reg; - - if (gma_power_begin(dev, false)) { - PSB_WVDC32(0x00000000, HISTOGRAM_INT_CONTROL); - hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL); - - psb_disable_pipestat(dev_priv, 0, PIPE_DPST_EVENT_ENABLE); - - pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC); - PSB_WVDC32(pwm_reg & !(PWM_PHASEIN_INT_ENABLE), - PWM_CONTROL_LOGIC); - pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC); - - gma_power_end(dev); - } -} - -int psb_irq_disable_dpst(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - unsigned long irqflags; - - spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); - - mid_disable_pipe_event(dev_priv, 0); - psb_irq_turn_off_dpst(dev); - - spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); - - return 0; -} - -#ifdef PSB_FIXME -static int psb_vblank_do_wait(struct drm_device *dev, - unsigned int *sequence, atomic_t *counter) -{ - unsigned int cur_vblank; - int ret = 0; - DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ, - (((cur_vblank = atomic_read(counter)) - - *sequence) <= (1 << 23))); - *sequence = cur_vblank; - - return ret; -} -#endif - -/* - * It is used to enable VBLANK interrupt - */ -int psb_enable_vblank(struct drm_device *dev, int pipe) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long irqflags; - uint32_t reg_val = 0; - uint32_t pipeconf_reg = mid_pipeconf(pipe); - -#if defined(CONFIG_DRM_PSB_MFLD) - /* Medfield is different - we should perhaps extract out vblank - and blacklight etc ops */ - if (IS_MFLD(dev) && !mdfld_panel_dpi(dev)) - return mdfld_enable_te(dev, pipe); -#endif - if (gma_power_begin(dev, false)) { - reg_val = REG_READ(pipeconf_reg); - gma_power_end(dev); - } - - if (!(reg_val & PIPEACONF_ENABLE)) - return -EINVAL; - - spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); - - if (pipe == 0) - dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG; - else if (pipe == 1) - dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEB_FLAG; - - PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); - PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); - psb_enable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE); - - spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); - - return 0; -} - -/* - * It is used to disable VBLANK interrupt - */ -void psb_disable_vblank(struct drm_device *dev, int pipe) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long irqflags; - -#if defined(CONFIG_DRM_PSB_MFLD) - if (IS_MFLD(dev) && !mdfld_panel_dpi(dev)) - mdfld_disable_te(dev, pipe); -#endif - spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); - - if (pipe == 0) - dev_priv->vdc_irq_mask &= ~_PSB_VSYNC_PIPEA_FLAG; - else if (pipe == 1) - dev_priv->vdc_irq_mask &= ~_PSB_VSYNC_PIPEB_FLAG; - - PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); - PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); - psb_disable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE); - - spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); -} - -/** - * mdfld_enable_te - enable TE events - * @dev: our DRM device - * @pipe: which pipe to work on - * - * Enable TE events on a Medfield display pipe. Medfield specific. - */ -int mdfld_enable_te(struct drm_device *dev, int pipe) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long flags; - uint32_t reg_val = 0; - uint32_t pipeconf_reg = mid_pipeconf(pipe); - - if (gma_power_begin(dev, false)) { - reg_val = REG_READ(pipeconf_reg); - gma_power_end(dev); - } - - if (!(reg_val & PIPEACONF_ENABLE)) - return -EINVAL; - - spin_lock_irqsave(&dev_priv->irqmask_lock, flags); - - mid_enable_pipe_event(dev_priv, pipe); - psb_enable_pipestat(dev_priv, pipe, PIPE_TE_ENABLE); - - spin_unlock_irqrestore(&dev_priv->irqmask_lock, flags); - - return 0; -} - -/** - * mdfld_disable_te - disable TE events - * @dev: our DRM device - * @pipe: which pipe to work on - * - * Disable TE events on a Medfield display pipe. Medfield specific. - */ -void mdfld_disable_te(struct drm_device *dev, int pipe) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long flags; - - spin_lock_irqsave(&dev_priv->irqmask_lock, flags); - - mid_disable_pipe_event(dev_priv, pipe); - psb_disable_pipestat(dev_priv, pipe, PIPE_TE_ENABLE); - - spin_unlock_irqrestore(&dev_priv->irqmask_lock, flags); -} - -/* Called from drm generic code, passed a 'crtc', which - * we use as a pipe index - */ -u32 psb_get_vblank_counter(struct drm_device *dev, int pipe) -{ - uint32_t high_frame = PIPEAFRAMEHIGH; - uint32_t low_frame = PIPEAFRAMEPIXEL; - uint32_t pipeconf_reg = PIPEACONF; - uint32_t reg_val = 0; - uint32_t high1 = 0, high2 = 0, low = 0, count = 0; - - switch (pipe) { - case 0: - break; - case 1: - high_frame = PIPEBFRAMEHIGH; - low_frame = PIPEBFRAMEPIXEL; - pipeconf_reg = PIPEBCONF; - break; - case 2: - high_frame = PIPECFRAMEHIGH; - low_frame = PIPECFRAMEPIXEL; - pipeconf_reg = PIPECCONF; - break; - default: - dev_err(dev->dev, "%s, invalid pipe.\n", __func__); - return 0; - } - - if (!gma_power_begin(dev, false)) - return 0; - - reg_val = REG_READ(pipeconf_reg); - - if (!(reg_val & PIPEACONF_ENABLE)) { - dev_err(dev->dev, "trying to get vblank count for disabled pipe %d\n", - pipe); - goto psb_get_vblank_counter_exit; - } - - /* - * High & low register fields aren't synchronized, so make sure - * we get a low value that's stable across two reads of the high - * register. - */ - do { - high1 = ((REG_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> - PIPE_FRAME_HIGH_SHIFT); - low = ((REG_READ(low_frame) & PIPE_FRAME_LOW_MASK) >> - PIPE_FRAME_LOW_SHIFT); - high2 = ((REG_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> - PIPE_FRAME_HIGH_SHIFT); - } while (high1 != high2); - - count = (high1 << 8) | low; - -psb_get_vblank_counter_exit: - - gma_power_end(dev); - - return count; -} - diff --git a/drivers/staging/gma500/psb_irq.h b/drivers/staging/gma500/psb_irq.h deleted file mode 100644 index 216fda38b57d..000000000000 --- a/drivers/staging/gma500/psb_irq.h +++ /dev/null @@ -1,45 +0,0 @@ -/************************************************************************** - * Copyright (c) 2009-2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Benjamin Defnet - * Rajesh Poornachandran - * - **************************************************************************/ - -#ifndef _SYSIRQ_H_ -#define _SYSIRQ_H_ - -#include - -bool sysirq_init(struct drm_device *dev); -void sysirq_uninit(struct drm_device *dev); - -void psb_irq_preinstall(struct drm_device *dev); -int psb_irq_postinstall(struct drm_device *dev); -void psb_irq_uninstall(struct drm_device *dev); -irqreturn_t psb_irq_handler(DRM_IRQ_ARGS); - -int psb_irq_enable_dpst(struct drm_device *dev); -int psb_irq_disable_dpst(struct drm_device *dev); -void psb_irq_turn_on_dpst(struct drm_device *dev); -void psb_irq_turn_off_dpst(struct drm_device *dev); -int psb_enable_vblank(struct drm_device *dev, int pipe); -void psb_disable_vblank(struct drm_device *dev, int pipe); -u32 psb_get_vblank_counter(struct drm_device *dev, int pipe); - -#endif /* _SYSIRQ_H_ */ diff --git a/drivers/staging/gma500/psb_lid.c b/drivers/staging/gma500/psb_lid.c deleted file mode 100644 index b867aabe6bf3..000000000000 --- a/drivers/staging/gma500/psb_lid.c +++ /dev/null @@ -1,88 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: Thomas Hellstrom - **************************************************************************/ - -#include -#include "psb_drv.h" -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include - -static void psb_lid_timer_func(unsigned long data) -{ - struct drm_psb_private * dev_priv = (struct drm_psb_private *)data; - struct drm_device *dev = (struct drm_device *)dev_priv->dev; - struct timer_list *lid_timer = &dev_priv->lid_timer; - unsigned long irq_flags; - u32 *lid_state = dev_priv->lid_state; - u32 pp_status; - - if (readl(lid_state) == dev_priv->lid_last_state) - goto lid_timer_schedule; - - if ((readl(lid_state)) & 0x01) { - /*lid state is open*/ - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while ((pp_status & PP_ON) == 0); - - /*FIXME: should be backlight level before*/ - psb_intel_lvds_set_brightness(dev, 100); - } else { - psb_intel_lvds_set_brightness(dev, 0); - - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & ~POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while ((pp_status & PP_ON) == 0); - } - dev_priv->lid_last_state = readl(lid_state); - -lid_timer_schedule: - spin_lock_irqsave(&dev_priv->lid_lock, irq_flags); - if (!timer_pending(lid_timer)) { - lid_timer->expires = jiffies + PSB_LID_DELAY; - add_timer(lid_timer); - } - spin_unlock_irqrestore(&dev_priv->lid_lock, irq_flags); -} - -void psb_lid_timer_init(struct drm_psb_private *dev_priv) -{ - struct timer_list *lid_timer = &dev_priv->lid_timer; - unsigned long irq_flags; - - spin_lock_init(&dev_priv->lid_lock); - spin_lock_irqsave(&dev_priv->lid_lock, irq_flags); - - init_timer(lid_timer); - - lid_timer->data = (unsigned long)dev_priv; - lid_timer->function = psb_lid_timer_func; - lid_timer->expires = jiffies + PSB_LID_DELAY; - - add_timer(lid_timer); - spin_unlock_irqrestore(&dev_priv->lid_lock, irq_flags); -} - -void psb_lid_timer_takedown(struct drm_psb_private *dev_priv) -{ - del_timer_sync(&dev_priv->lid_timer); -} - diff --git a/drivers/staging/gma500/psb_reg.h b/drivers/staging/gma500/psb_reg.h deleted file mode 100644 index b81c7c1e9c2d..000000000000 --- a/drivers/staging/gma500/psb_reg.h +++ /dev/null @@ -1,582 +0,0 @@ -/************************************************************************** - * - * Copyright (c) (2005-2007) Imagination Technologies Limited. - * Copyright (c) 2007, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.. - * - **************************************************************************/ - -#ifndef _PSB_REG_H_ -#define _PSB_REG_H_ - -#define PSB_CR_CLKGATECTL 0x0000 -#define _PSB_C_CLKGATECTL_AUTO_MAN_REG (1 << 24) -#define _PSB_C_CLKGATECTL_USE_CLKG_SHIFT (20) -#define _PSB_C_CLKGATECTL_USE_CLKG_MASK (0x3 << 20) -#define _PSB_C_CLKGATECTL_DPM_CLKG_SHIFT (16) -#define _PSB_C_CLKGATECTL_DPM_CLKG_MASK (0x3 << 16) -#define _PSB_C_CLKGATECTL_TA_CLKG_SHIFT (12) -#define _PSB_C_CLKGATECTL_TA_CLKG_MASK (0x3 << 12) -#define _PSB_C_CLKGATECTL_TSP_CLKG_SHIFT (8) -#define _PSB_C_CLKGATECTL_TSP_CLKG_MASK (0x3 << 8) -#define _PSB_C_CLKGATECTL_ISP_CLKG_SHIFT (4) -#define _PSB_C_CLKGATECTL_ISP_CLKG_MASK (0x3 << 4) -#define _PSB_C_CLKGATECTL_2D_CLKG_SHIFT (0) -#define _PSB_C_CLKGATECTL_2D_CLKG_MASK (0x3 << 0) -#define _PSB_C_CLKGATECTL_CLKG_ENABLED (0) -#define _PSB_C_CLKGATECTL_CLKG_DISABLED (1) -#define _PSB_C_CLKGATECTL_CLKG_AUTO (2) - -#define PSB_CR_CORE_ID 0x0010 -#define _PSB_CC_ID_ID_SHIFT (16) -#define _PSB_CC_ID_ID_MASK (0xFFFF << 16) -#define _PSB_CC_ID_CONFIG_SHIFT (0) -#define _PSB_CC_ID_CONFIG_MASK (0xFFFF << 0) - -#define PSB_CR_CORE_REVISION 0x0014 -#define _PSB_CC_REVISION_DESIGNER_SHIFT (24) -#define _PSB_CC_REVISION_DESIGNER_MASK (0xFF << 24) -#define _PSB_CC_REVISION_MAJOR_SHIFT (16) -#define _PSB_CC_REVISION_MAJOR_MASK (0xFF << 16) -#define _PSB_CC_REVISION_MINOR_SHIFT (8) -#define _PSB_CC_REVISION_MINOR_MASK (0xFF << 8) -#define _PSB_CC_REVISION_MAINTENANCE_SHIFT (0) -#define _PSB_CC_REVISION_MAINTENANCE_MASK (0xFF << 0) - -#define PSB_CR_DESIGNER_REV_FIELD1 0x0018 - -#define PSB_CR_SOFT_RESET 0x0080 -#define _PSB_CS_RESET_TSP_RESET (1 << 6) -#define _PSB_CS_RESET_ISP_RESET (1 << 5) -#define _PSB_CS_RESET_USE_RESET (1 << 4) -#define _PSB_CS_RESET_TA_RESET (1 << 3) -#define _PSB_CS_RESET_DPM_RESET (1 << 2) -#define _PSB_CS_RESET_TWOD_RESET (1 << 1) -#define _PSB_CS_RESET_BIF_RESET (1 << 0) - -#define PSB_CR_DESIGNER_REV_FIELD2 0x001C - -#define PSB_CR_EVENT_HOST_ENABLE2 0x0110 - -#define PSB_CR_EVENT_STATUS2 0x0118 - -#define PSB_CR_EVENT_HOST_CLEAR2 0x0114 -#define _PSB_CE2_BIF_REQUESTER_FAULT (1 << 4) - -#define PSB_CR_EVENT_STATUS 0x012C - -#define PSB_CR_EVENT_HOST_ENABLE 0x0130 - -#define PSB_CR_EVENT_HOST_CLEAR 0x0134 -#define _PSB_CE_MASTER_INTERRUPT (1 << 31) -#define _PSB_CE_TA_DPM_FAULT (1 << 28) -#define _PSB_CE_TWOD_COMPLETE (1 << 27) -#define _PSB_CE_DPM_OUT_OF_MEMORY_ZLS (1 << 25) -#define _PSB_CE_DPM_TA_MEM_FREE (1 << 24) -#define _PSB_CE_PIXELBE_END_RENDER (1 << 18) -#define _PSB_CE_SW_EVENT (1 << 14) -#define _PSB_CE_TA_FINISHED (1 << 13) -#define _PSB_CE_TA_TERMINATE (1 << 12) -#define _PSB_CE_DPM_REACHED_MEM_THRESH (1 << 3) -#define _PSB_CE_DPM_OUT_OF_MEMORY_GBL (1 << 2) -#define _PSB_CE_DPM_OUT_OF_MEMORY_MT (1 << 1) -#define _PSB_CE_DPM_3D_MEM_FREE (1 << 0) - - -#define PSB_USE_OFFSET_MASK 0x0007FFFF -#define PSB_USE_OFFSET_SIZE (PSB_USE_OFFSET_MASK + 1) -#define PSB_CR_USE_CODE_BASE0 0x0A0C -#define PSB_CR_USE_CODE_BASE1 0x0A10 -#define PSB_CR_USE_CODE_BASE2 0x0A14 -#define PSB_CR_USE_CODE_BASE3 0x0A18 -#define PSB_CR_USE_CODE_BASE4 0x0A1C -#define PSB_CR_USE_CODE_BASE5 0x0A20 -#define PSB_CR_USE_CODE_BASE6 0x0A24 -#define PSB_CR_USE_CODE_BASE7 0x0A28 -#define PSB_CR_USE_CODE_BASE8 0x0A2C -#define PSB_CR_USE_CODE_BASE9 0x0A30 -#define PSB_CR_USE_CODE_BASE10 0x0A34 -#define PSB_CR_USE_CODE_BASE11 0x0A38 -#define PSB_CR_USE_CODE_BASE12 0x0A3C -#define PSB_CR_USE_CODE_BASE13 0x0A40 -#define PSB_CR_USE_CODE_BASE14 0x0A44 -#define PSB_CR_USE_CODE_BASE15 0x0A48 -#define PSB_CR_USE_CODE_BASE(_i) (0x0A0C + ((_i) << 2)) -#define _PSB_CUC_BASE_DM_SHIFT (25) -#define _PSB_CUC_BASE_DM_MASK (0x3 << 25) -#define _PSB_CUC_BASE_ADDR_SHIFT (0) /* 1024-bit aligned address? */ -#define _PSB_CUC_BASE_ADDR_ALIGNSHIFT (7) -#define _PSB_CUC_BASE_ADDR_MASK (0x1FFFFFF << 0) -#define _PSB_CUC_DM_VERTEX (0) -#define _PSB_CUC_DM_PIXEL (1) -#define _PSB_CUC_DM_RESERVED (2) -#define _PSB_CUC_DM_EDM (3) - -#define PSB_CR_PDS_EXEC_BASE 0x0AB8 -#define _PSB_CR_PDS_EXEC_BASE_ADDR_SHIFT (20) /* 1MB aligned address */ -#define _PSB_CR_PDS_EXEC_BASE_ADDR_ALIGNSHIFT (20) - -#define PSB_CR_EVENT_KICKER 0x0AC4 -#define _PSB_CE_KICKER_ADDRESS_SHIFT (4) /* 128-bit aligned address */ - -#define PSB_CR_EVENT_KICK 0x0AC8 -#define _PSB_CE_KICK_NOW (1 << 0) - -#define PSB_CR_BIF_DIR_LIST_BASE1 0x0C38 - -#define PSB_CR_BIF_CTRL 0x0C00 -#define _PSB_CB_CTRL_CLEAR_FAULT (1 << 4) -#define _PSB_CB_CTRL_INVALDC (1 << 3) -#define _PSB_CB_CTRL_FLUSH (1 << 2) - -#define PSB_CR_BIF_INT_STAT 0x0C04 - -#define PSB_CR_BIF_FAULT 0x0C08 -#define _PSB_CBI_STAT_PF_N_RW (1 << 14) -#define _PSB_CBI_STAT_FAULT_SHIFT (0) -#define _PSB_CBI_STAT_FAULT_MASK (0x3FFF << 0) -#define _PSB_CBI_STAT_FAULT_CACHE (1 << 1) -#define _PSB_CBI_STAT_FAULT_TA (1 << 2) -#define _PSB_CBI_STAT_FAULT_VDM (1 << 3) -#define _PSB_CBI_STAT_FAULT_2D (1 << 4) -#define _PSB_CBI_STAT_FAULT_PBE (1 << 5) -#define _PSB_CBI_STAT_FAULT_TSP (1 << 6) -#define _PSB_CBI_STAT_FAULT_ISP (1 << 7) -#define _PSB_CBI_STAT_FAULT_USSEPDS (1 << 8) -#define _PSB_CBI_STAT_FAULT_HOST (1 << 9) - -#define PSB_CR_BIF_BANK0 0x0C78 -#define PSB_CR_BIF_BANK1 0x0C7C -#define PSB_CR_BIF_DIR_LIST_BASE0 0x0C84 -#define PSB_CR_BIF_TWOD_REQ_BASE 0x0C88 -#define PSB_CR_BIF_3D_REQ_BASE 0x0CAC - -#define PSB_CR_2D_SOCIF 0x0E18 -#define _PSB_C2_SOCIF_FREESPACE_SHIFT (0) -#define _PSB_C2_SOCIF_FREESPACE_MASK (0xFF << 0) -#define _PSB_C2_SOCIF_EMPTY (0x80 << 0) - -#define PSB_CR_2D_BLIT_STATUS 0x0E04 -#define _PSB_C2B_STATUS_BUSY (1 << 24) -#define _PSB_C2B_STATUS_COMPLETE_SHIFT (0) -#define _PSB_C2B_STATUS_COMPLETE_MASK (0xFFFFFF << 0) - -/* - * 2D defs. - */ - -/* - * 2D Slave Port Data : Block Header's Object Type - */ - -#define PSB_2D_CLIP_BH (0x00000000) -#define PSB_2D_PAT_BH (0x10000000) -#define PSB_2D_CTRL_BH (0x20000000) -#define PSB_2D_SRC_OFF_BH (0x30000000) -#define PSB_2D_MASK_OFF_BH (0x40000000) -#define PSB_2D_RESERVED1_BH (0x50000000) -#define PSB_2D_RESERVED2_BH (0x60000000) -#define PSB_2D_FENCE_BH (0x70000000) -#define PSB_2D_BLIT_BH (0x80000000) -#define PSB_2D_SRC_SURF_BH (0x90000000) -#define PSB_2D_DST_SURF_BH (0xA0000000) -#define PSB_2D_PAT_SURF_BH (0xB0000000) -#define PSB_2D_SRC_PAL_BH (0xC0000000) -#define PSB_2D_PAT_PAL_BH (0xD0000000) -#define PSB_2D_MASK_SURF_BH (0xE0000000) -#define PSB_2D_FLUSH_BH (0xF0000000) - -/* - * Clip Definition block (PSB_2D_CLIP_BH) - */ -#define PSB_2D_CLIPCOUNT_MAX (1) -#define PSB_2D_CLIPCOUNT_MASK (0x00000000) -#define PSB_2D_CLIPCOUNT_CLRMASK (0xFFFFFFFF) -#define PSB_2D_CLIPCOUNT_SHIFT (0) -/* clip rectangle min & max */ -#define PSB_2D_CLIP_XMAX_MASK (0x00FFF000) -#define PSB_2D_CLIP_XMAX_CLRMASK (0xFF000FFF) -#define PSB_2D_CLIP_XMAX_SHIFT (12) -#define PSB_2D_CLIP_XMIN_MASK (0x00000FFF) -#define PSB_2D_CLIP_XMIN_CLRMASK (0x00FFF000) -#define PSB_2D_CLIP_XMIN_SHIFT (0) -/* clip rectangle offset */ -#define PSB_2D_CLIP_YMAX_MASK (0x00FFF000) -#define PSB_2D_CLIP_YMAX_CLRMASK (0xFF000FFF) -#define PSB_2D_CLIP_YMAX_SHIFT (12) -#define PSB_2D_CLIP_YMIN_MASK (0x00000FFF) -#define PSB_2D_CLIP_YMIN_CLRMASK (0x00FFF000) -#define PSB_2D_CLIP_YMIN_SHIFT (0) - -/* - * Pattern Control (PSB_2D_PAT_BH) - */ -#define PSB_2D_PAT_HEIGHT_MASK (0x0000001F) -#define PSB_2D_PAT_HEIGHT_SHIFT (0) -#define PSB_2D_PAT_WIDTH_MASK (0x000003E0) -#define PSB_2D_PAT_WIDTH_SHIFT (5) -#define PSB_2D_PAT_YSTART_MASK (0x00007C00) -#define PSB_2D_PAT_YSTART_SHIFT (10) -#define PSB_2D_PAT_XSTART_MASK (0x000F8000) -#define PSB_2D_PAT_XSTART_SHIFT (15) - -/* - * 2D Control block (PSB_2D_CTRL_BH) - */ -/* Present Flags */ -#define PSB_2D_SRCCK_CTRL (0x00000001) -#define PSB_2D_DSTCK_CTRL (0x00000002) -#define PSB_2D_ALPHA_CTRL (0x00000004) -/* Colour Key Colour (SRC/DST)*/ -#define PSB_2D_CK_COL_MASK (0xFFFFFFFF) -#define PSB_2D_CK_COL_CLRMASK (0x00000000) -#define PSB_2D_CK_COL_SHIFT (0) -/* Colour Key Mask (SRC/DST)*/ -#define PSB_2D_CK_MASK_MASK (0xFFFFFFFF) -#define PSB_2D_CK_MASK_CLRMASK (0x00000000) -#define PSB_2D_CK_MASK_SHIFT (0) -/* Alpha Control (Alpha/RGB)*/ -#define PSB_2D_GBLALPHA_MASK (0x000FF000) -#define PSB_2D_GBLALPHA_CLRMASK (0xFFF00FFF) -#define PSB_2D_GBLALPHA_SHIFT (12) -#define PSB_2D_SRCALPHA_OP_MASK (0x00700000) -#define PSB_2D_SRCALPHA_OP_CLRMASK (0xFF8FFFFF) -#define PSB_2D_SRCALPHA_OP_SHIFT (20) -#define PSB_2D_SRCALPHA_OP_ONE (0x00000000) -#define PSB_2D_SRCALPHA_OP_SRC (0x00100000) -#define PSB_2D_SRCALPHA_OP_DST (0x00200000) -#define PSB_2D_SRCALPHA_OP_SG (0x00300000) -#define PSB_2D_SRCALPHA_OP_DG (0x00400000) -#define PSB_2D_SRCALPHA_OP_GBL (0x00500000) -#define PSB_2D_SRCALPHA_OP_ZERO (0x00600000) -#define PSB_2D_SRCALPHA_INVERT (0x00800000) -#define PSB_2D_SRCALPHA_INVERT_CLR (0xFF7FFFFF) -#define PSB_2D_DSTALPHA_OP_MASK (0x07000000) -#define PSB_2D_DSTALPHA_OP_CLRMASK (0xF8FFFFFF) -#define PSB_2D_DSTALPHA_OP_SHIFT (24) -#define PSB_2D_DSTALPHA_OP_ONE (0x00000000) -#define PSB_2D_DSTALPHA_OP_SRC (0x01000000) -#define PSB_2D_DSTALPHA_OP_DST (0x02000000) -#define PSB_2D_DSTALPHA_OP_SG (0x03000000) -#define PSB_2D_DSTALPHA_OP_DG (0x04000000) -#define PSB_2D_DSTALPHA_OP_GBL (0x05000000) -#define PSB_2D_DSTALPHA_OP_ZERO (0x06000000) -#define PSB_2D_DSTALPHA_INVERT (0x08000000) -#define PSB_2D_DSTALPHA_INVERT_CLR (0xF7FFFFFF) - -#define PSB_2D_PRE_MULTIPLICATION_ENABLE (0x10000000) -#define PSB_2D_PRE_MULTIPLICATION_CLRMASK (0xEFFFFFFF) -#define PSB_2D_ZERO_SOURCE_ALPHA_ENABLE (0x20000000) -#define PSB_2D_ZERO_SOURCE_ALPHA_CLRMASK (0xDFFFFFFF) - -/* - *Source Offset (PSB_2D_SRC_OFF_BH) - */ -#define PSB_2D_SRCOFF_XSTART_MASK ((0x00000FFF) << 12) -#define PSB_2D_SRCOFF_XSTART_SHIFT (12) -#define PSB_2D_SRCOFF_YSTART_MASK (0x00000FFF) -#define PSB_2D_SRCOFF_YSTART_SHIFT (0) - -/* - * Mask Offset (PSB_2D_MASK_OFF_BH) - */ -#define PSB_2D_MASKOFF_XSTART_MASK ((0x00000FFF) << 12) -#define PSB_2D_MASKOFF_XSTART_SHIFT (12) -#define PSB_2D_MASKOFF_YSTART_MASK (0x00000FFF) -#define PSB_2D_MASKOFF_YSTART_SHIFT (0) - -/* - * 2D Fence (see PSB_2D_FENCE_BH): bits 0:27 are ignored - */ - -/* - *Blit Rectangle (PSB_2D_BLIT_BH) - */ - -#define PSB_2D_ROT_MASK (3 << 25) -#define PSB_2D_ROT_CLRMASK (~PSB_2D_ROT_MASK) -#define PSB_2D_ROT_NONE (0 << 25) -#define PSB_2D_ROT_90DEGS (1 << 25) -#define PSB_2D_ROT_180DEGS (2 << 25) -#define PSB_2D_ROT_270DEGS (3 << 25) - -#define PSB_2D_COPYORDER_MASK (3 << 23) -#define PSB_2D_COPYORDER_CLRMASK (~PSB_2D_COPYORDER_MASK) -#define PSB_2D_COPYORDER_TL2BR (0 << 23) -#define PSB_2D_COPYORDER_BR2TL (1 << 23) -#define PSB_2D_COPYORDER_TR2BL (2 << 23) -#define PSB_2D_COPYORDER_BL2TR (3 << 23) - -#define PSB_2D_DSTCK_CLRMASK (0xFF9FFFFF) -#define PSB_2D_DSTCK_DISABLE (0x00000000) -#define PSB_2D_DSTCK_PASS (0x00200000) -#define PSB_2D_DSTCK_REJECT (0x00400000) - -#define PSB_2D_SRCCK_CLRMASK (0xFFE7FFFF) -#define PSB_2D_SRCCK_DISABLE (0x00000000) -#define PSB_2D_SRCCK_PASS (0x00080000) -#define PSB_2D_SRCCK_REJECT (0x00100000) - -#define PSB_2D_CLIP_ENABLE (0x00040000) - -#define PSB_2D_ALPHA_ENABLE (0x00020000) - -#define PSB_2D_PAT_CLRMASK (0xFFFEFFFF) -#define PSB_2D_PAT_MASK (0x00010000) -#define PSB_2D_USE_PAT (0x00010000) -#define PSB_2D_USE_FILL (0x00000000) -/* - * Tungsten Graphics note on rop codes: If rop A and rop B are - * identical, the mask surface will not be read and need not be - * set up. - */ - -#define PSB_2D_ROP3B_MASK (0x0000FF00) -#define PSB_2D_ROP3B_CLRMASK (0xFFFF00FF) -#define PSB_2D_ROP3B_SHIFT (8) -/* rop code A */ -#define PSB_2D_ROP3A_MASK (0x000000FF) -#define PSB_2D_ROP3A_CLRMASK (0xFFFFFF00) -#define PSB_2D_ROP3A_SHIFT (0) - -#define PSB_2D_ROP4_MASK (0x0000FFFF) -/* - * DWORD0: (Only pass if Pattern control == Use Fill Colour) - * Fill Colour RGBA8888 - */ -#define PSB_2D_FILLCOLOUR_MASK (0xFFFFFFFF) -#define PSB_2D_FILLCOLOUR_SHIFT (0) -/* - * DWORD1: (Always Present) - * X Start (Dest) - * Y Start (Dest) - */ -#define PSB_2D_DST_XSTART_MASK (0x00FFF000) -#define PSB_2D_DST_XSTART_CLRMASK (0xFF000FFF) -#define PSB_2D_DST_XSTART_SHIFT (12) -#define PSB_2D_DST_YSTART_MASK (0x00000FFF) -#define PSB_2D_DST_YSTART_CLRMASK (0xFFFFF000) -#define PSB_2D_DST_YSTART_SHIFT (0) -/* - * DWORD2: (Always Present) - * X Size (Dest) - * Y Size (Dest) - */ -#define PSB_2D_DST_XSIZE_MASK (0x00FFF000) -#define PSB_2D_DST_XSIZE_CLRMASK (0xFF000FFF) -#define PSB_2D_DST_XSIZE_SHIFT (12) -#define PSB_2D_DST_YSIZE_MASK (0x00000FFF) -#define PSB_2D_DST_YSIZE_CLRMASK (0xFFFFF000) -#define PSB_2D_DST_YSIZE_SHIFT (0) - -/* - * Source Surface (PSB_2D_SRC_SURF_BH) - */ -/* - * WORD 0 - */ - -#define PSB_2D_SRC_FORMAT_MASK (0x00078000) -#define PSB_2D_SRC_1_PAL (0x00000000) -#define PSB_2D_SRC_2_PAL (0x00008000) -#define PSB_2D_SRC_4_PAL (0x00010000) -#define PSB_2D_SRC_8_PAL (0x00018000) -#define PSB_2D_SRC_8_ALPHA (0x00020000) -#define PSB_2D_SRC_4_ALPHA (0x00028000) -#define PSB_2D_SRC_332RGB (0x00030000) -#define PSB_2D_SRC_4444ARGB (0x00038000) -#define PSB_2D_SRC_555RGB (0x00040000) -#define PSB_2D_SRC_1555ARGB (0x00048000) -#define PSB_2D_SRC_565RGB (0x00050000) -#define PSB_2D_SRC_0888ARGB (0x00058000) -#define PSB_2D_SRC_8888ARGB (0x00060000) -#define PSB_2D_SRC_8888UYVY (0x00068000) -#define PSB_2D_SRC_RESERVED (0x00070000) -#define PSB_2D_SRC_1555ARGB_LOOKUP (0x00078000) - - -#define PSB_2D_SRC_STRIDE_MASK (0x00007FFF) -#define PSB_2D_SRC_STRIDE_CLRMASK (0xFFFF8000) -#define PSB_2D_SRC_STRIDE_SHIFT (0) -/* - * WORD 1 - Base Address - */ -#define PSB_2D_SRC_ADDR_MASK (0x0FFFFFFC) -#define PSB_2D_SRC_ADDR_CLRMASK (0x00000003) -#define PSB_2D_SRC_ADDR_SHIFT (2) -#define PSB_2D_SRC_ADDR_ALIGNSHIFT (2) - -/* - * Pattern Surface (PSB_2D_PAT_SURF_BH) - */ -/* - * WORD 0 - */ - -#define PSB_2D_PAT_FORMAT_MASK (0x00078000) -#define PSB_2D_PAT_1_PAL (0x00000000) -#define PSB_2D_PAT_2_PAL (0x00008000) -#define PSB_2D_PAT_4_PAL (0x00010000) -#define PSB_2D_PAT_8_PAL (0x00018000) -#define PSB_2D_PAT_8_ALPHA (0x00020000) -#define PSB_2D_PAT_4_ALPHA (0x00028000) -#define PSB_2D_PAT_332RGB (0x00030000) -#define PSB_2D_PAT_4444ARGB (0x00038000) -#define PSB_2D_PAT_555RGB (0x00040000) -#define PSB_2D_PAT_1555ARGB (0x00048000) -#define PSB_2D_PAT_565RGB (0x00050000) -#define PSB_2D_PAT_0888ARGB (0x00058000) -#define PSB_2D_PAT_8888ARGB (0x00060000) - -#define PSB_2D_PAT_STRIDE_MASK (0x00007FFF) -#define PSB_2D_PAT_STRIDE_CLRMASK (0xFFFF8000) -#define PSB_2D_PAT_STRIDE_SHIFT (0) -/* - * WORD 1 - Base Address - */ -#define PSB_2D_PAT_ADDR_MASK (0x0FFFFFFC) -#define PSB_2D_PAT_ADDR_CLRMASK (0x00000003) -#define PSB_2D_PAT_ADDR_SHIFT (2) -#define PSB_2D_PAT_ADDR_ALIGNSHIFT (2) - -/* - * Destination Surface (PSB_2D_DST_SURF_BH) - */ -/* - * WORD 0 - */ - -#define PSB_2D_DST_FORMAT_MASK (0x00078000) -#define PSB_2D_DST_332RGB (0x00030000) -#define PSB_2D_DST_4444ARGB (0x00038000) -#define PSB_2D_DST_555RGB (0x00040000) -#define PSB_2D_DST_1555ARGB (0x00048000) -#define PSB_2D_DST_565RGB (0x00050000) -#define PSB_2D_DST_0888ARGB (0x00058000) -#define PSB_2D_DST_8888ARGB (0x00060000) -#define PSB_2D_DST_8888AYUV (0x00070000) - -#define PSB_2D_DST_STRIDE_MASK (0x00007FFF) -#define PSB_2D_DST_STRIDE_CLRMASK (0xFFFF8000) -#define PSB_2D_DST_STRIDE_SHIFT (0) -/* - * WORD 1 - Base Address - */ -#define PSB_2D_DST_ADDR_MASK (0x0FFFFFFC) -#define PSB_2D_DST_ADDR_CLRMASK (0x00000003) -#define PSB_2D_DST_ADDR_SHIFT (2) -#define PSB_2D_DST_ADDR_ALIGNSHIFT (2) - -/* - * Mask Surface (PSB_2D_MASK_SURF_BH) - */ -/* - * WORD 0 - */ -#define PSB_2D_MASK_STRIDE_MASK (0x00007FFF) -#define PSB_2D_MASK_STRIDE_CLRMASK (0xFFFF8000) -#define PSB_2D_MASK_STRIDE_SHIFT (0) -/* - * WORD 1 - Base Address - */ -#define PSB_2D_MASK_ADDR_MASK (0x0FFFFFFC) -#define PSB_2D_MASK_ADDR_CLRMASK (0x00000003) -#define PSB_2D_MASK_ADDR_SHIFT (2) -#define PSB_2D_MASK_ADDR_ALIGNSHIFT (2) - -/* - * Source Palette (PSB_2D_SRC_PAL_BH) - */ - -#define PSB_2D_SRCPAL_ADDR_SHIFT (0) -#define PSB_2D_SRCPAL_ADDR_CLRMASK (0xF0000007) -#define PSB_2D_SRCPAL_ADDR_MASK (0x0FFFFFF8) -#define PSB_2D_SRCPAL_BYTEALIGN (1024) - -/* - * Pattern Palette (PSB_2D_PAT_PAL_BH) - */ - -#define PSB_2D_PATPAL_ADDR_SHIFT (0) -#define PSB_2D_PATPAL_ADDR_CLRMASK (0xF0000007) -#define PSB_2D_PATPAL_ADDR_MASK (0x0FFFFFF8) -#define PSB_2D_PATPAL_BYTEALIGN (1024) - -/* - * Rop3 Codes (2 LS bytes) - */ - -#define PSB_2D_ROP3_SRCCOPY (0xCCCC) -#define PSB_2D_ROP3_PATCOPY (0xF0F0) -#define PSB_2D_ROP3_WHITENESS (0xFFFF) -#define PSB_2D_ROP3_BLACKNESS (0x0000) -#define PSB_2D_ROP3_SRC (0xCC) -#define PSB_2D_ROP3_PAT (0xF0) -#define PSB_2D_ROP3_DST (0xAA) - -/* - * Sizes. - */ - -#define PSB_SCENE_HW_COOKIE_SIZE 16 -#define PSB_TA_MEM_HW_COOKIE_SIZE 16 - -/* - * Scene stuff. - */ - -#define PSB_NUM_HW_SCENES 2 - -/* - * Scheduler completion actions. - */ - -#define PSB_RASTER_BLOCK 0 -#define PSB_RASTER 1 -#define PSB_RETURN 2 -#define PSB_TA 3 - -/* Power management */ -#define PSB_PUNIT_PORT 0x04 -#define PSB_OSPMBA 0x78 -#define PSB_APMBA 0x7a -#define PSB_APM_CMD 0x0 -#define PSB_APM_STS 0x04 -#define PSB_PWRGT_VID_ENC_MASK 0x30 -#define PSB_PWRGT_VID_DEC_MASK 0xc -#define PSB_PWRGT_GL3_MASK 0xc0 - -#define PSB_PM_SSC 0x20 -#define PSB_PM_SSS 0x30 -#define PSB_PWRGT_DISPLAY_MASK 0xc /*on a different BA than video/gfx*/ -#define MDFLD_PWRGT_DISPLAY_A_CNTR 0x0000000c -#define MDFLD_PWRGT_DISPLAY_B_CNTR 0x0000c000 -#define MDFLD_PWRGT_DISPLAY_C_CNTR 0x00030000 -#define MDFLD_PWRGT_DISP_MIPI_CNTR 0x000c0000 -#define MDFLD_PWRGT_DISPLAY_CNTR (MDFLD_PWRGT_DISPLAY_A_CNTR | MDFLD_PWRGT_DISPLAY_B_CNTR | MDFLD_PWRGT_DISPLAY_C_CNTR | MDFLD_PWRGT_DISP_MIPI_CNTR) /* 0x000fc00c */ -/* Display SSS register bits are different in A0 vs. B0 */ -#define PSB_PWRGT_GFX_MASK 0x3 -#define MDFLD_PWRGT_DISPLAY_A_STS 0x000000c0 -#define MDFLD_PWRGT_DISPLAY_B_STS 0x00000300 -#define MDFLD_PWRGT_DISPLAY_C_STS 0x00000c00 -#define PSB_PWRGT_GFX_MASK_B0 0xc3 -#define MDFLD_PWRGT_DISPLAY_A_STS_B0 0x0000000c -#define MDFLD_PWRGT_DISPLAY_B_STS_B0 0x0000c000 -#define MDFLD_PWRGT_DISPLAY_C_STS_B0 0x00030000 -#define MDFLD_PWRGT_DISP_MIPI_STS 0x000c0000 -#define MDFLD_PWRGT_DISPLAY_STS_A0 (MDFLD_PWRGT_DISPLAY_A_STS | MDFLD_PWRGT_DISPLAY_B_STS | MDFLD_PWRGT_DISPLAY_C_STS | MDFLD_PWRGT_DISP_MIPI_STS) /* 0x000fc00c */ -#define MDFLD_PWRGT_DISPLAY_STS_B0 (MDFLD_PWRGT_DISPLAY_A_STS_B0 | MDFLD_PWRGT_DISPLAY_B_STS_B0 | MDFLD_PWRGT_DISPLAY_C_STS_B0 | MDFLD_PWRGT_DISP_MIPI_STS) /* 0x000fc00c */ -#endif -- cgit v1.2.3-55-g7522 From ff4f38765d0e3bcc7d992d07cb27c37adb9b16ba Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 16 Jan 2012 12:51:14 -0600 Subject: staging: drm/omap: drm API update: make fops struct const Update to reflect changes in: "Make the per-driver file_operations struct const" Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_drv.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c index 602aa2dd49c8..4db40f717b94 100644 --- a/drivers/staging/omapdrm/omap_drv.c +++ b/drivers/staging/omapdrm/omap_drv.c @@ -708,6 +708,18 @@ static struct vm_operations_struct omap_gem_vm_ops = { .close = drm_gem_vm_close, }; +static const struct file_operations omapdriver_fops = { + .owner = THIS_MODULE, + .open = drm_open, + .unlocked_ioctl = drm_ioctl, + .release = drm_release, + .mmap = omap_gem_mmap, + .poll = drm_poll, + .fasync = drm_fasync, + .read = drm_read, + .llseek = noop_llseek, +}; + static struct drm_driver omap_drm_driver = { .driver_features = DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM, @@ -738,17 +750,7 @@ static struct drm_driver omap_drm_driver = { .dumb_destroy = omap_gem_dumb_destroy, .ioctls = ioctls, .num_ioctls = DRM_OMAP_NUM_IOCTLS, - .fops = { - .owner = THIS_MODULE, - .open = drm_open, - .unlocked_ioctl = drm_ioctl, - .release = drm_release, - .mmap = omap_gem_mmap, - .poll = drm_poll, - .fasync = drm_fasync, - .read = drm_read, - .llseek = noop_llseek, - }, + .fops = &omapdriver_fops, .name = DRIVER_NAME, .desc = DRIVER_DESC, .date = DRIVER_DATE, -- cgit v1.2.3-55-g7522 From ae43d7ca4047b126adedcf7028c1ff99ed18703c Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 16 Jan 2012 12:51:15 -0600 Subject: staging: drm/omap: drm API update: addfb2 Update to reflect changes in: "drm: add an fb creation ioctl that takes a pixel format v5" Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_drv.h | 30 +++++++++- drivers/staging/omapdrm/omap_fb.c | 103 +++++++++++++++++++++++++++-------- drivers/staging/omapdrm/omap_fbdev.c | 55 ++++++++++++------- 3 files changed, 143 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h index 76c42515ecc5..4ad2ae55ec43 100644 --- a/drivers/staging/omapdrm/omap_drv.h +++ b/drivers/staging/omapdrm/omap_drv.h @@ -24,6 +24,7 @@ #include #include #include +#include #include "omap_drm.h" #include "omap_priv.h" @@ -80,9 +81,9 @@ void omap_connector_flush(struct drm_connector *connector, int x, int y, int w, int h); struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, - struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd); + struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd); struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, - struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo); + struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos); struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb); int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y, void **vaddr, dma_addr_t *paddr, unsigned int *screen_width); @@ -132,4 +133,29 @@ static inline int align_pitch(int pitch, int width, int bpp) return ALIGN(pitch, 8 * bytespp); } +/* should these be made into common util helpers? + */ + +static inline int objects_lookup(struct drm_device *dev, + struct drm_file *filp, uint32_t pixel_format, + struct drm_gem_object **bos, uint32_t *handles) +{ + int i, n = drm_format_num_planes(pixel_format); + + for (i = 0; i < n; i++) { + bos[i] = drm_gem_object_lookup(dev, filp, handles[i]); + if (!bos[i]) { + goto fail; + } + } + + return 0; + +fail: + while (--i > 0) { + drm_gem_object_unreference_unlocked(bos[i]); + } + return -ENOENT; +} + #endif /* __OMAP_DRV_H__ */ diff --git a/drivers/staging/omapdrm/omap_fb.c b/drivers/staging/omapdrm/omap_fb.c index 0b50c5b3b564..805a18e559c4 100644 --- a/drivers/staging/omapdrm/omap_fb.c +++ b/drivers/staging/omapdrm/omap_fb.c @@ -22,11 +22,43 @@ #include "drm_crtc.h" #include "drm_crtc_helper.h" - /* * framebuffer funcs */ +/* per-format info: */ +struct format { + enum omap_color_mode dss_format; + uint32_t pixel_format; + struct { + int stride_bpp; /* this times width is stride */ + int sub_y; /* sub-sample in y dimension */ + } planes[4]; + bool yuv; +}; + +static const struct format formats[] = { + /* 16bpp [A]RGB: */ + { OMAP_DSS_COLOR_RGB16, DRM_FORMAT_RGB565, {{2, 1}}, false }, /* RGB16-565 */ + { OMAP_DSS_COLOR_RGB12U, DRM_FORMAT_RGBX4444, {{2, 1}}, false }, /* RGB12x-4444 */ + { OMAP_DSS_COLOR_RGBX16, DRM_FORMAT_XRGB4444, {{2, 1}}, false }, /* xRGB12-4444 */ + { OMAP_DSS_COLOR_RGBA16, DRM_FORMAT_RGBA4444, {{2, 1}}, false }, /* RGBA12-4444 */ + { OMAP_DSS_COLOR_ARGB16, DRM_FORMAT_ARGB4444, {{2, 1}}, false }, /* ARGB16-4444 */ + { OMAP_DSS_COLOR_XRGB16_1555, DRM_FORMAT_XRGB1555, {{2, 1}}, false }, /* xRGB15-1555 */ + { OMAP_DSS_COLOR_ARGB16_1555, DRM_FORMAT_ARGB1555, {{2, 1}}, false }, /* ARGB16-1555 */ + /* 24bpp RGB: */ + { OMAP_DSS_COLOR_RGB24P, DRM_FORMAT_RGB888, {{3, 1}}, false }, /* RGB24-888 */ + /* 32bpp [A]RGB: */ + { OMAP_DSS_COLOR_RGBX32, DRM_FORMAT_RGBX8888, {{4, 1}}, false }, /* RGBx24-8888 */ + { OMAP_DSS_COLOR_RGB24U, DRM_FORMAT_XRGB8888, {{4, 1}}, false }, /* xRGB24-8888 */ + { OMAP_DSS_COLOR_RGBA32, DRM_FORMAT_RGBA8888, {{4, 1}}, false }, /* RGBA32-8888 */ + { OMAP_DSS_COLOR_ARGB32, DRM_FORMAT_ARGB8888, {{4, 1}}, false }, /* ARGB32-8888 */ + /* YUV: */ + { OMAP_DSS_COLOR_NV12, DRM_FORMAT_NV12, {{1, 1}, {1, 2}}, true }, + { OMAP_DSS_COLOR_YUV2, DRM_FORMAT_YUYV, {{2, 1}}, true }, + { OMAP_DSS_COLOR_UYVY, DRM_FORMAT_UYVY, {{2, 1}}, true }, +}; + #define to_omap_framebuffer(x) container_of(x, struct omap_framebuffer, base) struct omap_framebuffer { @@ -34,6 +66,7 @@ struct omap_framebuffer { struct drm_gem_object *bo; int size; dma_addr_t paddr; + const struct format *format; }; static int omap_framebuffer_create_handle(struct drm_framebuffer *fb, @@ -91,7 +124,7 @@ int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y, int bpp = fb->bits_per_pixel / 8; unsigned long offset; - offset = (x * bpp) + (y * fb->pitch); + offset = (x * bpp) + (y * fb->pitches[0]); if (vaddr) { void *bo_vaddr = omap_gem_vaddr(omap_fb->bo); @@ -105,7 +138,7 @@ int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y, } *paddr = omap_fb->paddr + offset; - *screen_width = fb->pitch / bpp; + *screen_width = fb->pitches[0] / bpp; return omap_fb->size - offset; } @@ -171,39 +204,61 @@ void omap_framebuffer_flush(struct drm_framebuffer *fb, } struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, - struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd) + struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd) { - struct drm_gem_object *bo; + struct drm_gem_object *bos[4]; struct drm_framebuffer *fb; - bo = drm_gem_object_lookup(dev, file, mode_cmd->handle); - if (!bo) { - return ERR_PTR(-ENOENT); - } - fb = omap_framebuffer_init(dev, mode_cmd, bo); - if (!fb) { - return ERR_PTR(-ENOMEM); + int ret; + + ret = objects_lookup(dev, file, mode_cmd->pixel_format, + bos, mode_cmd->handles); + if (ret) + return ERR_PTR(ret); + + fb = omap_framebuffer_init(dev, mode_cmd, bos); + if (IS_ERR(fb)) { + int i, n = drm_format_num_planes(mode_cmd->pixel_format); + for (i = 0; i < n; i++) + drm_gem_object_unreference_unlocked(bos[i]); + return fb; } return fb; } struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, - struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo) + struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos) { struct omap_framebuffer *omap_fb; struct drm_framebuffer *fb = NULL; - int size, ret; + const struct format *format = NULL; + int i, size, ret; - DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%d)", + DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%4.4s)", dev, mode_cmd, mode_cmd->width, mode_cmd->height, - mode_cmd->bpp); + (char *)&mode_cmd->pixel_format); + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + if (formats[i].pixel_format == mode_cmd->pixel_format) { + format = &formats[i]; + break; + } + } + + if (!format) { + dev_err(dev->dev, "unsupported pixel format: %4.4s\n", + (char *)&mode_cmd->pixel_format); + ret = -EINVAL; + goto fail; + } /* in case someone tries to feed us a completely bogus stride: */ - mode_cmd->pitch = align_pitch(mode_cmd->pitch, - mode_cmd->width, mode_cmd->bpp); + mode_cmd->pitches[0] = align_pitch(mode_cmd->pitches[0], + mode_cmd->width, format->planes[0].stride_bpp); omap_fb = kzalloc(sizeof(*omap_fb), GFP_KERNEL); if (!omap_fb) { dev_err(dev->dev, "could not allocate fb\n"); + ret = -ENOMEM; goto fail; } @@ -216,17 +271,19 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, DBG("create: FB ID: %d (%p)", fb->base.id, fb); - size = PAGE_ALIGN(mode_cmd->pitch * mode_cmd->height); + size = PAGE_ALIGN(mode_cmd->pitches[0] * mode_cmd->height); - if (size > bo->size) { + if (size > bos[0]->size) { dev_err(dev->dev, "provided buffer object is too small!\n"); + ret = -EINVAL; goto fail; } - omap_fb->bo = bo; + omap_fb->bo = bos[0]; omap_fb->size = size; - if (omap_gem_get_paddr(bo, &omap_fb->paddr, true)) { + ret = omap_gem_get_paddr(bos[0], &omap_fb->paddr, true); + if (ret) { dev_err(dev->dev, "could not map (paddr)!\n"); goto fail; } @@ -239,5 +296,5 @@ fail: if (fb) { omap_framebuffer_destroy(fb); } - return NULL; + return ERR_PTR(ret); } diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c index 093ae2f87b20..ba4530697fe8 100644 --- a/drivers/staging/omapdrm/omap_fbdev.c +++ b/drivers/staging/omapdrm/omap_fbdev.c @@ -129,10 +129,8 @@ static int omap_fbdev_create(struct drm_fb_helper *helper, struct drm_framebuffer *fb = NULL; union omap_gem_size gsize; struct fb_info *fbi = NULL; - struct drm_mode_fb_cmd mode_cmd = {0}; + struct drm_mode_fb_cmd2 mode_cmd = {0}; dma_addr_t paddr; - void __iomem *vaddr; - int size, screen_width; int ret; /* only doing ARGB32 since this is what is needed to alpha-blend @@ -145,36 +143,56 @@ static int omap_fbdev_create(struct drm_fb_helper *helper, sizes->surface_height, sizes->surface_bpp, sizes->fb_width, sizes->fb_height); + mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp, + sizes->surface_depth); + mode_cmd.width = sizes->surface_width; mode_cmd.height = sizes->surface_height; - mode_cmd.bpp = sizes->surface_bpp; - mode_cmd.depth = sizes->surface_depth; - - mode_cmd.pitch = align_pitch( - mode_cmd.width * ((mode_cmd.bpp + 7) / 8), - mode_cmd.width, mode_cmd.bpp); + mode_cmd.pitches[0] = align_pitch( + mode_cmd.width * ((sizes->surface_bpp + 7) / 8), + mode_cmd.width, sizes->surface_bpp); fbdev->ywrap_enabled = priv->has_dmm && ywrap_enabled; if (fbdev->ywrap_enabled) { /* need to align pitch to page size if using DMM scrolling */ - mode_cmd.pitch = ALIGN(mode_cmd.pitch, PAGE_SIZE); + mode_cmd.pitches[0] = ALIGN(mode_cmd.pitches[0], PAGE_SIZE); } /* allocate backing bo */ gsize = (union omap_gem_size){ - .bytes = PAGE_ALIGN(mode_cmd.pitch * mode_cmd.height), + .bytes = PAGE_ALIGN(mode_cmd.pitches[0] * mode_cmd.height), }; DBG("allocating %d bytes for fb %d", gsize.bytes, dev->primary->index); fbdev->bo = omap_gem_new(dev, gsize, OMAP_BO_SCANOUT | OMAP_BO_WC); if (!fbdev->bo) { dev_err(dev->dev, "failed to allocate buffer object\n"); + ret = -ENOMEM; goto fail; } - fb = omap_framebuffer_init(dev, &mode_cmd, fbdev->bo); - if (!fb) { + fb = omap_framebuffer_init(dev, &mode_cmd, &fbdev->bo); + if (IS_ERR(fb)) { dev_err(dev->dev, "failed to allocate fb\n"); + /* note: if fb creation failed, we can't rely on fb destroy + * to unref the bo: + */ + drm_gem_object_unreference(fbdev->bo); + ret = PTR_ERR(fb); + goto fail; + } + + /* note: this keeps the bo pinned.. which is perhaps not ideal, + * but is needed as long as we use fb_mmap() to mmap to userspace + * (since this happens using fix.smem_start). Possibly we could + * implement our own mmap using GEM mmap support to avoid this + * (non-tiled buffer doesn't need to be pinned for fbcon to write + * to it). Then we just need to be sure that we are able to re- + * pin it in case of an opps. + */ + ret = omap_gem_get_paddr(fbdev->bo, &paddr, true); + if (ret) { + dev_err(dev->dev, "could not map (paddr)!\n"); ret = -ENOMEM; goto fail; } @@ -206,18 +224,15 @@ static int omap_fbdev_create(struct drm_fb_helper *helper, goto fail_unlock; } - drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth); + drm_fb_helper_fill_fix(fbi, fb->pitches[0], fb->depth); drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height); - size = omap_framebuffer_get_buffer(fb, 0, 0, - &vaddr, &paddr, &screen_width); - dev->mode_config.fb_base = paddr; - fbi->screen_base = vaddr; - fbi->screen_size = size; + fbi->screen_base = omap_gem_vaddr(fbdev->bo); + fbi->screen_size = fbdev->bo->size; fbi->fix.smem_start = paddr; - fbi->fix.smem_len = size; + fbi->fix.smem_len = fbdev->bo->size; /* if we have DMM, then we can use it for scrolling by just * shuffling pages around in DMM rather than doing sw blit. -- cgit v1.2.3-55-g7522 From bb5c2d9aaaa26a55e684c175c431df95aa178233 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 16 Jan 2012 12:51:16 -0600 Subject: staging: drm/omap: add drm_plane support Because framebuffer layer and overlay scanout video pipes are basically thing in OMAP display subsystem (the only difference being that the first video pipe does not support scaling or YUV formats), much of the CRTC code is pulled into the plane implementation, and a private plane object is used by the CRTC object. This avoids code duplication between the plane and CRTC. Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/Makefile | 1 + drivers/staging/omapdrm/omap_crtc.c | 189 +++++---------------- drivers/staging/omapdrm/omap_drv.c | 53 +++--- drivers/staging/omapdrm/omap_drv.h | 8 +- drivers/staging/omapdrm/omap_plane.c | 308 +++++++++++++++++++++++++++++++++++ drivers/staging/omapdrm/omap_priv.h | 12 +- 6 files changed, 403 insertions(+), 168 deletions(-) create mode 100644 drivers/staging/omapdrm/omap_plane.c (limited to 'drivers') diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile index 592cf69020cd..d9cdc120d122 100644 --- a/drivers/staging/omapdrm/Makefile +++ b/drivers/staging/omapdrm/Makefile @@ -7,6 +7,7 @@ ccflags-y := -Iinclude/drm -Werror omapdrm-y := omap_drv.o \ omap_debugfs.o \ omap_crtc.o \ + omap_plane.o \ omap_encoder.o \ omap_connector.o \ omap_fb.o \ diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c index cffdf5e12394..a91c78898019 100644 --- a/drivers/staging/omapdrm/omap_crtc.c +++ b/drivers/staging/omapdrm/omap_crtc.c @@ -27,196 +27,95 @@ struct omap_crtc { struct drm_crtc base; - struct omap_overlay *ovl; - struct omap_overlay_info info; + struct drm_plane *plane; + const char *name; int id; - /* if there is a pending flip, this will be non-null: */ + /* if there is a pending flip, these will be non-null: */ struct drm_pending_vblank_event *event; + struct drm_framebuffer *old_fb; }; -/* push changes down to dss2 */ -static int commit(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - struct omap_overlay *ovl = omap_crtc->ovl; - struct omap_overlay_info *info = &omap_crtc->info; - int ret; - - DBG("%s", omap_crtc->ovl->name); - DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width, - info->out_height, info->screen_width); - DBG("%d,%d %08x", info->pos_x, info->pos_y, info->paddr); - - /* NOTE: do we want to do this at all here, or just wait - * for dpms(ON) since other CRTC's may not have their mode - * set yet, so fb dimensions may still change.. - */ - ret = ovl->set_overlay_info(ovl, info); - if (ret) { - dev_err(dev->dev, "could not set overlay info\n"); - return ret; - } - - /* our encoder doesn't necessarily get a commit() after this, in - * particular in the dpms() and mode_set_base() cases, so force the - * manager to update: - * - * could this be in the encoder somehow? - */ - if (ovl->manager) { - ret = ovl->manager->apply(ovl->manager); - if (ret) { - dev_err(dev->dev, "could not apply settings\n"); - return ret; - } - } - - if (info->enabled) { - omap_framebuffer_flush(crtc->fb, crtc->x, crtc->y, - crtc->fb->width, crtc->fb->height); - } - - return 0; -} - -/* update parameters that are dependent on the framebuffer dimensions and - * position within the fb that this crtc scans out from. This is called - * when framebuffer dimensions or x,y base may have changed, either due - * to our mode, or a change in another crtc that is scanning out of the - * same fb. - */ -static void update_scanout(struct drm_crtc *crtc) -{ - struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - dma_addr_t paddr; - unsigned int screen_width; - - omap_framebuffer_get_buffer(crtc->fb, crtc->x, crtc->y, - NULL, &paddr, &screen_width); - - DBG("%s: %d,%d: %08x (%d)", omap_crtc->ovl->name, - crtc->x, crtc->y, (u32)paddr, screen_width); - - omap_crtc->info.paddr = paddr; - omap_crtc->info.screen_width = screen_width; -} - static void omap_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size) { - struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - DBG("%s", omap_crtc->ovl->name); + /* not supported.. at least not yet */ } static void omap_crtc_destroy(struct drm_crtc *crtc) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - DBG("%s", omap_crtc->ovl->name); + omap_crtc->plane->funcs->destroy(omap_crtc->plane); drm_crtc_cleanup(crtc); kfree(omap_crtc); } static void omap_crtc_dpms(struct drm_crtc *crtc, int mode) { + struct omap_drm_private *priv = crtc->dev->dev_private; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + int i; - DBG("%s: %d", omap_crtc->ovl->name, mode); + WARN_ON(omap_plane_dpms(omap_crtc->plane, mode)); - if (mode == DRM_MODE_DPMS_ON) { - update_scanout(crtc); - omap_crtc->info.enabled = true; - } else { - omap_crtc->info.enabled = false; + for (i = 0; i < priv->num_planes; i++) { + struct drm_plane *plane = priv->planes[i]; + if (plane->crtc == crtc) + WARN_ON(omap_plane_dpms(plane, mode)); } - - WARN_ON(commit(crtc)); } static bool omap_crtc_mode_fixup(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) { - struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - DBG("%s", omap_crtc->ovl->name); return true; } static int omap_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_plane *plane = omap_crtc->plane; - DBG("%s: %d,%d: %dx%d", omap_crtc->ovl->name, x, y, - mode->hdisplay, mode->vdisplay); - - /* just use adjusted mode */ - mode = adjusted_mode; - - omap_crtc->info.width = mode->hdisplay; - omap_crtc->info.height = mode->vdisplay; - omap_crtc->info.out_width = mode->hdisplay; - omap_crtc->info.out_height = mode->vdisplay; - omap_crtc->info.color_mode = OMAP_DSS_COLOR_RGB24U; - omap_crtc->info.rotation_type = OMAP_DSS_ROT_DMA; - omap_crtc->info.rotation = OMAP_DSS_ROT_0; - omap_crtc->info.global_alpha = 0xff; - omap_crtc->info.mirror = 0; - omap_crtc->info.mirror = 0; - omap_crtc->info.pos_x = 0; - omap_crtc->info.pos_y = 0; -#if 0 /* re-enable when these are available in DSS2 driver */ - omap_crtc->info.zorder = 3; /* GUI in the front, video behind */ - omap_crtc->info.min_x_decim = 1; - omap_crtc->info.max_x_decim = 1; - omap_crtc->info.min_y_decim = 1; - omap_crtc->info.max_y_decim = 1; -#endif - - update_scanout(crtc); - - return 0; + return plane->funcs->update_plane(plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + x << 16, y << 16, + mode->hdisplay << 16, mode->vdisplay << 16); } static void omap_crtc_prepare(struct drm_crtc *crtc) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - struct omap_overlay *ovl = omap_crtc->ovl; - - DBG("%s", omap_crtc->ovl->name); - - ovl->get_overlay_info(ovl, &omap_crtc->info); - + DBG("%s", omap_crtc->name); omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); } static void omap_crtc_commit(struct drm_crtc *crtc) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - DBG("%s", omap_crtc->ovl->name); + DBG("%s", omap_crtc->name); omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON); } static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *old_fb) { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_plane *plane = omap_crtc->plane; + struct drm_display_mode *mode = &crtc->mode; - DBG("%s %d,%d: fb=%p", omap_crtc->ovl->name, x, y, old_fb); - - update_scanout(crtc); - - return commit(crtc); + return plane->funcs->update_plane(plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + x << 16, y << 16, + mode->hdisplay << 16, mode->vdisplay << 16); } static void omap_crtc_load_lut(struct drm_crtc *crtc) { - struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - DBG("%s", omap_crtc->ovl->name); } static void page_flip_cb(void *arg) @@ -225,15 +124,16 @@ static void page_flip_cb(void *arg) struct drm_device *dev = crtc->dev; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); struct drm_pending_vblank_event *event = omap_crtc->event; + struct drm_framebuffer *old_fb = omap_crtc->old_fb; struct timeval now; unsigned long flags; WARN_ON(!event); omap_crtc->event = NULL; + omap_crtc->old_fb = NULL; - update_scanout(crtc); - WARN_ON(commit(crtc)); + omap_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb); /* wakeup userspace */ /* TODO: this should happen *after* flip in vsync IRQ handler */ @@ -264,8 +164,9 @@ static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, return -EINVAL; } - crtc->fb = fb; + omap_crtc->old_fb = crtc->fb; omap_crtc->event = event; + crtc->fb = fb; omap_gem_op_async(omap_framebuffer_bo(fb), OMAP_GEM_READ, page_flip_cb, crtc); @@ -290,12 +191,6 @@ static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = { .load_lut = omap_crtc_load_lut, }; -struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc) -{ - struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - return omap_crtc->ovl; -} - /* initialize crtc */ struct drm_crtc *omap_crtc_init(struct drm_device *dev, struct omap_overlay *ovl, int id) @@ -310,9 +205,13 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev, goto fail; } - omap_crtc->ovl = ovl; - omap_crtc->id = id; crtc = &omap_crtc->base; + + omap_crtc->plane = omap_plane_init(dev, ovl, (1 << id), true); + omap_crtc->plane->crtc = crtc; + omap_crtc->name = ovl->name; + omap_crtc->id = id; + drm_crtc_init(dev, crtc, &omap_crtc_funcs); drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs); diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c index 4db40f717b94..2de99ffecc51 100644 --- a/drivers/staging/omapdrm/omap_drv.c +++ b/drivers/staging/omapdrm/omap_drv.c @@ -204,12 +204,6 @@ static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl, struct omap_overlay_manager *mgr = NULL; struct drm_crtc *crtc; - if (ovl->manager) { - DBG("disconnecting %s from %s", ovl->name, - ovl->manager->name); - ovl->unset_manager(ovl); - } - /* find next best connector, ones with detected connection first */ while (*j < priv->num_connectors && !mgr) { @@ -245,11 +239,6 @@ static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl, (*j)++; } - if (mgr) { - DBG("connecting %s to %s", ovl->name, mgr->name); - ovl->set_manager(ovl, mgr); - } - crtc = omap_crtc_init(dev, ovl, priv->num_crtcs); if (!crtc) { @@ -265,6 +254,26 @@ static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl, return 0; } +static int create_plane(struct drm_device *dev, struct omap_overlay *ovl, + unsigned int possible_crtcs) +{ + struct omap_drm_private *priv = dev->dev_private; + struct drm_plane *plane = + omap_plane_init(dev, ovl, possible_crtcs, false); + + if (!plane) { + dev_err(dev->dev, "could not create plane: %s\n", + ovl->name); + return -ENOMEM; + } + + BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)); + + priv->planes[priv->num_planes++] = plane; + + return 0; +} + static int match_dev_name(struct omap_dss_device *dssdev, void *data) { return !strcmp(dssdev->name, data); @@ -332,6 +341,12 @@ static int omap_modeset_init(struct drm_device *dev) omap_dss_get_overlay(kms_pdata->ovl_ids[i]); create_crtc(dev, ovl, &j, connected_connectors); } + + for (i = 0; i < kms_pdata->pln_cnt; i++) { + struct omap_overlay *ovl = + omap_dss_get_overlay(kms_pdata->pln_ids[i]); + create_plane(dev, ovl, (1 << priv->num_crtcs) - 1); + } } else { /* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try * to make educated guesses about everything else @@ -353,6 +368,12 @@ static int omap_modeset_init(struct drm_device *dev) create_crtc(dev, omap_dss_get_overlay(i), &j, connected_connectors); } + + /* use any remaining overlays as drm planes */ + for (; i < omap_dss_get_num_overlays(); i++) { + struct omap_overlay *ovl = omap_dss_get_overlay(i); + create_plane(dev, ovl, (1 << priv->num_crtcs) - 1); + } } /* for now keep the mapping of CRTCs and encoders static.. */ @@ -361,15 +382,7 @@ static int omap_modeset_init(struct drm_device *dev) struct omap_overlay_manager *mgr = omap_encoder_get_manager(encoder); - encoder->possible_crtcs = 0; - - for (j = 0; j < priv->num_crtcs; j++) { - struct omap_overlay *ovl = - omap_crtc_get_overlay(priv->crtcs[j]); - if (ovl->manager == mgr) { - encoder->possible_crtcs |= (1 << j); - } - } + encoder->possible_crtcs = (1 << priv->num_crtcs) - 1; DBG("%s: possible_crtcs=%08x", mgr->name, encoder->possible_crtcs); diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h index 4ad2ae55ec43..e2b1b553e8b6 100644 --- a/drivers/staging/omapdrm/omap_drv.h +++ b/drivers/staging/omapdrm/omap_drv.h @@ -42,6 +42,8 @@ struct omap_drm_private { unsigned int num_crtcs; struct drm_crtc *crtcs[8]; + unsigned int num_planes; + struct drm_plane *planes[8]; unsigned int num_encoders; struct drm_encoder *encoders[8]; unsigned int num_connectors; @@ -62,7 +64,11 @@ void omap_fbdev_free(struct drm_device *dev); struct drm_crtc *omap_crtc_init(struct drm_device *dev, struct omap_overlay *ovl, int id); -struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc); + +struct drm_plane *omap_plane_init(struct drm_device *dev, + struct omap_overlay *ovl, unsigned int possible_crtcs, + bool priv); +int omap_plane_dpms(struct drm_plane *plane, int mode); struct drm_encoder *omap_encoder_init(struct drm_device *dev, struct omap_overlay_manager *mgr); diff --git a/drivers/staging/omapdrm/omap_plane.c b/drivers/staging/omapdrm/omap_plane.c new file mode 100644 index 000000000000..a1d948c45ab6 --- /dev/null +++ b/drivers/staging/omapdrm/omap_plane.c @@ -0,0 +1,308 @@ +/* + * drivers/staging/omapdrm/omap_plane.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "omap_drv.h" + +/* some hackery because omapdss has an 'enum omap_plane' (which would be + * better named omap_plane_id).. and compiler seems unhappy about having + * both a 'struct omap_plane' and 'enum omap_plane' + */ +#define omap_plane _omap_plane + +/* + * plane funcs + */ + +#define to_omap_plane(x) container_of(x, struct omap_plane, base) + +struct omap_plane { + struct drm_plane base; + struct omap_overlay *ovl; + struct omap_overlay_info info; + + /* Source values, converted to integers because we don't support + * fractional positions: + */ + unsigned int src_x, src_y; +}; + + +/* push changes down to dss2 */ +static int commit(struct drm_plane *plane) +{ + struct drm_device *dev = plane->dev; + struct omap_plane *omap_plane = to_omap_plane(plane); + struct omap_overlay *ovl = omap_plane->ovl; + struct omap_overlay_info *info = &omap_plane->info; + int ret; + + DBG("%s", ovl->name); + DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width, + info->out_height, info->screen_width); + DBG("%d,%d %08x", info->pos_x, info->pos_y, info->paddr); + + /* NOTE: do we want to do this at all here, or just wait + * for dpms(ON) since other CRTC's may not have their mode + * set yet, so fb dimensions may still change.. + */ + ret = ovl->set_overlay_info(ovl, info); + if (ret) { + dev_err(dev->dev, "could not set overlay info\n"); + return ret; + } + + /* our encoder doesn't necessarily get a commit() after this, in + * particular in the dpms() and mode_set_base() cases, so force the + * manager to update: + * + * could this be in the encoder somehow? + */ + if (ovl->manager) { + ret = ovl->manager->apply(ovl->manager); + if (ret) { + dev_err(dev->dev, "could not apply settings\n"); + return ret; + } + } + + if (info->enabled) { + omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y, + info->out_width, info->out_height); + } + + return 0; +} + +/* when CRTC that we are attached to has potentially changed, this checks + * if we are attached to proper manager, and if necessary updates. + */ +static void update_manager(struct drm_plane *plane) +{ + struct omap_drm_private *priv = plane->dev->dev_private; + struct omap_plane *omap_plane = to_omap_plane(plane); + struct omap_overlay *ovl = omap_plane->ovl; + struct omap_overlay_manager *mgr = NULL; + int i; + + if (plane->crtc) { + for (i = 0; i < priv->num_encoders; i++) { + struct drm_encoder *encoder = priv->encoders[i]; + if (encoder->crtc == plane->crtc) { + mgr = omap_encoder_get_manager(encoder); + break; + } + } + } + + if (ovl->manager != mgr) { + bool enabled = omap_plane->info.enabled; + + /* don't switch things around with enabled overlays: */ + if (enabled) + omap_plane_dpms(plane, DRM_MODE_DPMS_OFF); + + if (ovl->manager) { + DBG("disconnecting %s from %s", ovl->name, + ovl->manager->name); + ovl->unset_manager(ovl); + } + + if (mgr) { + DBG("connecting %s to %s", ovl->name, mgr->name); + ovl->set_manager(ovl, mgr); + } + + if (enabled && mgr) + omap_plane_dpms(plane, DRM_MODE_DPMS_ON); + } +} + +/* update parameters that are dependent on the framebuffer dimensions and + * position within the fb that this plane scans out from. This is called + * when framebuffer or x,y base may have changed. + */ +static void update_scanout(struct drm_plane *plane) +{ + struct omap_plane *omap_plane = to_omap_plane(plane); + unsigned int screen_width; /* really means "pitch" */ + dma_addr_t paddr; + + omap_framebuffer_get_buffer(plane->fb, + omap_plane->src_x, omap_plane->src_y, + NULL, &paddr, &screen_width); + + DBG("%s: %d,%d: %08x (%d)", omap_plane->ovl->name, + omap_plane->src_x, omap_plane->src_y, + (u32)paddr, screen_width); + + omap_plane->info.paddr = paddr; + omap_plane->info.screen_width = screen_width; +} + +static int omap_plane_update(struct drm_plane *plane, + struct drm_crtc *crtc, struct drm_framebuffer *fb, + int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h) +{ + struct omap_plane *omap_plane = to_omap_plane(plane); + + /* src values are in Q16 fixed point, convert to integer: */ + src_x = src_x >> 16; + src_y = src_y >> 16; + src_w = src_w >> 16; + src_h = src_h >> 16; + + omap_plane->info.enabled = true; + omap_plane->info.pos_x = crtc_x; + omap_plane->info.pos_y = crtc_y; + omap_plane->info.out_width = crtc_w; + omap_plane->info.out_height = crtc_h; + omap_plane->info.width = src_w; + omap_plane->info.height = src_h; + omap_plane->src_x = src_x; + omap_plane->src_y = src_y; + + /* note: this is done after this fxn returns.. but if we need + * to do a commit/update_scanout, etc before this returns we + * need the current value. + */ + plane->fb = fb; + plane->crtc = crtc; + + update_scanout(plane); + update_manager(plane); + commit(plane); + + return 0; +} + +static int omap_plane_disable(struct drm_plane *plane) +{ + return omap_plane_dpms(plane, DRM_MODE_DPMS_OFF); +} + +static void omap_plane_destroy(struct drm_plane *plane) +{ + struct omap_plane *omap_plane = to_omap_plane(plane); + DBG("%s", omap_plane->ovl->name); + omap_plane_disable(plane); + drm_plane_cleanup(plane); + kfree(omap_plane); +} + +int omap_plane_dpms(struct drm_plane *plane, int mode) +{ + struct omap_plane *omap_plane = to_omap_plane(plane); + + DBG("%s: %d", omap_plane->ovl->name, mode); + + if (mode == DRM_MODE_DPMS_ON) { + update_scanout(plane); + omap_plane->info.enabled = true; + } else { + omap_plane->info.enabled = false; + } + + return commit(plane); +} + +static const struct drm_plane_funcs omap_plane_funcs = { + .update_plane = omap_plane_update, + .disable_plane = omap_plane_disable, + .destroy = omap_plane_destroy, +}; + +static const uint32_t formats[] = { + DRM_FORMAT_RGB565, + DRM_FORMAT_RGBX4444, + DRM_FORMAT_XRGB4444, + DRM_FORMAT_RGBA4444, + DRM_FORMAT_ABGR4444, + DRM_FORMAT_XRGB1555, + DRM_FORMAT_ARGB1555, + DRM_FORMAT_RGB888, + DRM_FORMAT_RGBX8888, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_RGBA8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_NV12, + DRM_FORMAT_YUYV, + DRM_FORMAT_UYVY, +}; + +/* initialize plane */ +struct drm_plane *omap_plane_init(struct drm_device *dev, + struct omap_overlay *ovl, unsigned int possible_crtcs, + bool priv) +{ + struct drm_plane *plane = NULL; + struct omap_plane *omap_plane; + + DBG("%s: possible_crtcs=%08x, priv=%d", ovl->name, + possible_crtcs, priv); + + omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL); + if (!omap_plane) { + dev_err(dev->dev, "could not allocate plane\n"); + goto fail; + } + + omap_plane->ovl = ovl; + plane = &omap_plane->base; + + drm_plane_init(dev, plane, possible_crtcs, &omap_plane_funcs, + formats, ARRAY_SIZE(formats), priv); + + /* get our starting configuration, set defaults for parameters + * we don't currently use, etc: + */ + ovl->get_overlay_info(ovl, &omap_plane->info); + omap_plane->info.rotation_type = OMAP_DSS_ROT_DMA; + omap_plane->info.rotation = OMAP_DSS_ROT_0; + omap_plane->info.global_alpha = 0xff; + omap_plane->info.mirror = 0; + omap_plane->info.mirror = 0; + + /* Set defaults depending on whether we are a CRTC or overlay + * layer. + * TODO add ioctl to give userspace an API to change this.. this + * will come in a subsequent patch. + */ + if (priv) + omap_plane->info.zorder = 0; + else + omap_plane->info.zorder = 1; + + /* TODO color mode should come from fb.. this will come in a + * subsequent patch + */ + omap_plane->info.color_mode = OMAP_DSS_COLOR_RGB24U; + + update_manager(plane); + + return plane; + +fail: + if (plane) { + omap_plane_destroy(plane); + } + return NULL; +} diff --git a/drivers/staging/omapdrm/omap_priv.h b/drivers/staging/omapdrm/omap_priv.h index c324709aa9a1..ef6441447147 100644 --- a/drivers/staging/omapdrm/omap_priv.h +++ b/drivers/staging/omapdrm/omap_priv.h @@ -27,14 +27,22 @@ * pipes/overlays/CRTCs are used.. if this is not provided, then instead the * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to * one manager, with priority given to managers that are connected to - * detected devices. This should be a good default behavior for most cases, - * but yet there still might be times when you wish to do something different. + * detected devices. Remaining overlays are used as video planes. This + * should be a good default behavior for most cases, but yet there still + * might be times when you wish to do something different. */ struct omap_kms_platform_data { + /* overlays to use as CRTCs: */ int ovl_cnt; const int *ovl_ids; + + /* overlays to use as video planes: */ + int pln_cnt; + const int *pln_ids; + int mgr_cnt; const int *mgr_ids; + int dev_cnt; const char **dev_names; }; -- cgit v1.2.3-55-g7522 From 9a0774e0991c82a95ef5e5848b318bd15aba0dcd Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 16 Jan 2012 12:51:17 -0600 Subject: staging: drm/omap: multiplanar and YUV support Add support in framebuffer objects for other color formats and multi- planar YUV (NV12). Since this requires changing the API between the plane and fb for getting scanout information (paddr, etc), take advantage of the opportunity and put in place a way to allow fb's to be unpinned when they are not being scanned out. Now, before start of scanout the plane calls omap_framebuffer_pin() which takes care to pin all the backing bo's, then omap_framebuffer_update_scanout() however many times to update the scanout address(es), etc, and then when finished omap_framebuffer_unpin(). Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_crtc.c | 2 +- drivers/staging/omapdrm/omap_drv.h | 8 +- drivers/staging/omapdrm/omap_fb.c | 149 ++++++++++++++++++++++++----------- drivers/staging/omapdrm/omap_gem.c | 5 ++ drivers/staging/omapdrm/omap_plane.c | 53 +++++++++---- 5 files changed, 149 insertions(+), 68 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c index a91c78898019..3cee04edcec8 100644 --- a/drivers/staging/omapdrm/omap_crtc.c +++ b/drivers/staging/omapdrm/omap_crtc.c @@ -168,7 +168,7 @@ static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, omap_crtc->event = event; crtc->fb = fb; - omap_gem_op_async(omap_framebuffer_bo(fb), OMAP_GEM_READ, + omap_gem_op_async(omap_framebuffer_bo(fb, 0), OMAP_GEM_READ, page_flip_cb, crtc); return 0; diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h index e2b1b553e8b6..48f6fce614b6 100644 --- a/drivers/staging/omapdrm/omap_drv.h +++ b/drivers/staging/omapdrm/omap_drv.h @@ -90,9 +90,11 @@ struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd); struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos); -struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb); -int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y, - void **vaddr, dma_addr_t *paddr, unsigned int *screen_width); +struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb, int p); +int omap_framebuffer_pin(struct drm_framebuffer *fb); +void omap_framebuffer_unpin(struct drm_framebuffer *fb); +void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y, + struct omap_overlay_info *info); struct drm_connector *omap_framebuffer_get_next_connector( struct drm_framebuffer *fb, struct drm_connector *from); void omap_framebuffer_flush(struct drm_framebuffer *fb, diff --git a/drivers/staging/omapdrm/omap_fb.c b/drivers/staging/omapdrm/omap_fb.c index 805a18e559c4..d021a7ec58df 100644 --- a/drivers/staging/omapdrm/omap_fb.c +++ b/drivers/staging/omapdrm/omap_fb.c @@ -59,14 +59,20 @@ static const struct format formats[] = { { OMAP_DSS_COLOR_UYVY, DRM_FORMAT_UYVY, {{2, 1}}, true }, }; +/* per-plane info for the fb: */ +struct plane { + struct drm_gem_object *bo; + uint32_t pitch; + uint32_t offset; + dma_addr_t paddr; +}; + #define to_omap_framebuffer(x) container_of(x, struct omap_framebuffer, base) struct omap_framebuffer { struct drm_framebuffer base; - struct drm_gem_object *bo; - int size; - dma_addr_t paddr; const struct format *format; + struct plane planes[4]; }; static int omap_framebuffer_create_handle(struct drm_framebuffer *fb, @@ -74,22 +80,23 @@ static int omap_framebuffer_create_handle(struct drm_framebuffer *fb, unsigned int *handle) { struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); - return drm_gem_handle_create(file_priv, omap_fb->bo, handle); + return drm_gem_handle_create(file_priv, + omap_fb->planes[0].bo, handle); } static void omap_framebuffer_destroy(struct drm_framebuffer *fb) { - struct drm_device *dev = fb->dev; struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); + int i, n = drm_format_num_planes(omap_fb->format->pixel_format); DBG("destroy: FB ID: %d (%p)", fb->base.id, fb); drm_framebuffer_cleanup(fb); - if (omap_fb->bo) { - if (omap_fb->paddr && omap_gem_put_paddr(omap_fb->bo)) - dev_err(dev->dev, "could not unmap!\n"); - drm_gem_object_unreference_unlocked(omap_fb->bo); + for (i = 0; i < n; i++) { + struct plane *plane = &omap_fb->planes[i]; + if (plane->bo) + drm_gem_object_unreference_unlocked(plane->bo); } kfree(omap_fb); @@ -116,37 +123,76 @@ static const struct drm_framebuffer_funcs omap_framebuffer_funcs = { .dirty = omap_framebuffer_dirty, }; -/* returns the buffer size */ -int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y, - void **vaddr, dma_addr_t *paddr, unsigned int *screen_width) +/* pins buffer in preparation for scanout */ +int omap_framebuffer_pin(struct drm_framebuffer *fb) { struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); - int bpp = fb->bits_per_pixel / 8; - unsigned long offset; - - offset = (x * bpp) + (y * fb->pitches[0]); - - if (vaddr) { - void *bo_vaddr = omap_gem_vaddr(omap_fb->bo); - /* note: we can only count on having a vaddr for buffers that - * are allocated physically contiguously to begin with (ie. - * dma_alloc_coherent()). But this should be ok because it - * is only used by legacy fbdev - */ - BUG_ON(IS_ERR_OR_NULL(bo_vaddr)); - *vaddr = bo_vaddr + offset; + int ret, i, n = drm_format_num_planes(omap_fb->format->pixel_format); + + for (i = 0; i < n; i++) { + struct plane *plane = &omap_fb->planes[i]; + ret = omap_gem_get_paddr(plane->bo, &plane->paddr, true); + if (ret) + goto fail; } - *paddr = omap_fb->paddr + offset; - *screen_width = fb->pitches[0] / bpp; + return 0; - return omap_fb->size - offset; +fail: + while (--i > 0) { + struct plane *plane = &omap_fb->planes[i]; + omap_gem_put_paddr(plane->bo); + } + return ret; } -struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb) +/* releases buffer when done with scanout */ +void omap_framebuffer_unpin(struct drm_framebuffer *fb) { struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); - return omap_fb->bo; + int i, n = drm_format_num_planes(omap_fb->format->pixel_format); + + for (i = 0; i < n; i++) { + struct plane *plane = &omap_fb->planes[i]; + omap_gem_put_paddr(plane->bo); + } +} + +/* update ovl info for scanout, handles cases of multi-planar fb's, etc. + */ +void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y, + struct omap_overlay_info *info) +{ + struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); + const struct format *format = omap_fb->format; + struct plane *plane = &omap_fb->planes[0]; + unsigned int offset; + + offset = plane->offset + + (x * format->planes[0].stride_bpp) + + (y * plane->pitch / format->planes[0].sub_y); + + info->color_mode = format->dss_format; + info->paddr = plane->paddr + offset; + info->screen_width = plane->pitch / format->planes[0].stride_bpp; + + if (format->dss_format == OMAP_DSS_COLOR_NV12) { + plane = &omap_fb->planes[1]; + offset = plane->offset + + (x * format->planes[1].stride_bpp) + + (y * plane->pitch / format->planes[1].sub_y); + info->p_uv_addr = plane->paddr + offset; + } else { + info->p_uv_addr = 0; + } +} + +struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb, int p) +{ + struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb); + if (p >= drm_format_num_planes(omap_fb->format->pixel_format)) + return NULL; + return omap_fb->planes[p].bo; } /* iterate thru all the connectors, returning ones that are attached @@ -231,7 +277,7 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, struct omap_framebuffer *omap_fb; struct drm_framebuffer *fb = NULL; const struct format *format = NULL; - int i, size, ret; + int ret, i, n = drm_format_num_planes(mode_cmd->pixel_format); DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%4.4s)", dev, mode_cmd, mode_cmd->width, mode_cmd->height, @@ -251,10 +297,6 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, goto fail; } - /* in case someone tries to feed us a completely bogus stride: */ - mode_cmd->pitches[0] = align_pitch(mode_cmd->pitches[0], - mode_cmd->width, format->planes[0].stride_bpp); - omap_fb = kzalloc(sizeof(*omap_fb), GFP_KERNEL); if (!omap_fb) { dev_err(dev->dev, "could not allocate fb\n"); @@ -271,21 +313,32 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, DBG("create: FB ID: %d (%p)", fb->base.id, fb); - size = PAGE_ALIGN(mode_cmd->pitches[0] * mode_cmd->height); + omap_fb->format = format; - if (size > bos[0]->size) { - dev_err(dev->dev, "provided buffer object is too small!\n"); - ret = -EINVAL; - goto fail; - } + for (i = 0; i < n; i++) { + struct plane *plane = &omap_fb->planes[i]; + int size, pitch = mode_cmd->pitches[i]; - omap_fb->bo = bos[0]; - omap_fb->size = size; + if (pitch < (mode_cmd->width * format->planes[i].stride_bpp)) { + dev_err(dev->dev, "provided buffer pitch is too small! %d < %d\n", + pitch, mode_cmd->width * format->planes[i].stride_bpp); + ret = -EINVAL; + goto fail; + } - ret = omap_gem_get_paddr(bos[0], &omap_fb->paddr, true); - if (ret) { - dev_err(dev->dev, "could not map (paddr)!\n"); - goto fail; + size = pitch * mode_cmd->height / format->planes[i].sub_y; + + if (size > (bos[i]->size - mode_cmd->offsets[i])) { + dev_err(dev->dev, "provided buffer object is too small! %d < %d\n", + bos[i]->size - mode_cmd->offsets[i], size); + ret = -EINVAL; + goto fail; + } + + plane->bo = bos[i]; + plane->offset = mode_cmd->offsets[i]; + plane->pitch = mode_cmd->pitches[i]; + plane->paddr = pitch; } drm_helper_mode_fill_fb_struct(fb, mode_cmd); diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c index e0ebd1d139f6..ae1ad357f7f2 100644 --- a/drivers/staging/omapdrm/omap_gem.c +++ b/drivers/staging/omapdrm/omap_gem.c @@ -1034,6 +1034,11 @@ void omap_gem_free_object(struct drm_gem_object *obj) drm_gem_free_mmap_offset(obj); } + /* this means the object is still pinned.. which really should + * not happen. I think.. + */ + WARN_ON(omap_obj->paddr_cnt > 0); + /* don't free externally allocated backing memory */ if (!(omap_obj->flags & OMAP_BO_EXT_MEM)) { if (omap_obj->pages) { diff --git a/drivers/staging/omapdrm/omap_plane.c b/drivers/staging/omapdrm/omap_plane.c index a1d948c45ab6..66eed75e634d 100644 --- a/drivers/staging/omapdrm/omap_plane.c +++ b/drivers/staging/omapdrm/omap_plane.c @@ -40,6 +40,9 @@ struct omap_plane { * fractional positions: */ unsigned int src_x, src_y; + + /* last fb that we pinned: */ + struct drm_framebuffer *pinned_fb; }; @@ -55,7 +58,8 @@ static int commit(struct drm_plane *plane) DBG("%s", ovl->name); DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width, info->out_height, info->screen_width); - DBG("%d,%d %08x", info->pos_x, info->pos_y, info->paddr); + DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, + info->paddr, info->p_uv_addr); /* NOTE: do we want to do this at all here, or just wait * for dpms(ON) since other CRTC's may not have their mode @@ -133,6 +137,23 @@ static void update_manager(struct drm_plane *plane) } } +/* update which fb (if any) is pinned for scanout */ +static int update_pin(struct drm_plane *plane, struct drm_framebuffer *fb) +{ + struct omap_plane *omap_plane = to_omap_plane(plane); + int ret = 0; + + if (omap_plane->pinned_fb != fb) { + if (omap_plane->pinned_fb) + omap_framebuffer_unpin(omap_plane->pinned_fb); + omap_plane->pinned_fb = fb; + if (fb) + ret = omap_framebuffer_pin(fb); + } + + return ret; +} + /* update parameters that are dependent on the framebuffer dimensions and * position within the fb that this plane scans out from. This is called * when framebuffer or x,y base may have changed. @@ -140,19 +161,23 @@ static void update_manager(struct drm_plane *plane) static void update_scanout(struct drm_plane *plane) { struct omap_plane *omap_plane = to_omap_plane(plane); - unsigned int screen_width; /* really means "pitch" */ - dma_addr_t paddr; + struct omap_overlay_info *info = &omap_plane->info; + int ret; - omap_framebuffer_get_buffer(plane->fb, - omap_plane->src_x, omap_plane->src_y, - NULL, &paddr, &screen_width); + ret = update_pin(plane, plane->fb); + if (ret) { + dev_err(plane->dev->dev, + "could not pin fb: %d\n", ret); + omap_plane->info.enabled = false; + } - DBG("%s: %d,%d: %08x (%d)", omap_plane->ovl->name, - omap_plane->src_x, omap_plane->src_y, - (u32)paddr, screen_width); + omap_framebuffer_update_scanout(plane->fb, + omap_plane->src_x, omap_plane->src_y, info); - omap_plane->info.paddr = paddr; - omap_plane->info.screen_width = screen_width; + DBG("%s: %d,%d: %08x %08x (%d)", omap_plane->ovl->name, + omap_plane->src_x, omap_plane->src_y, + (u32)info->paddr, (u32)info->p_uv_addr, + info->screen_width); } static int omap_plane_update(struct drm_plane *plane, @@ -219,6 +244,7 @@ int omap_plane_dpms(struct drm_plane *plane, int mode) omap_plane->info.enabled = true; } else { omap_plane->info.enabled = false; + update_pin(plane, NULL); } return commit(plane); @@ -291,11 +317,6 @@ struct drm_plane *omap_plane_init(struct drm_device *dev, else omap_plane->info.zorder = 1; - /* TODO color mode should come from fb.. this will come in a - * subsequent patch - */ - omap_plane->info.color_mode = OMAP_DSS_COLOR_RGB24U; - update_manager(plane); return plane; -- cgit v1.2.3-55-g7522 From 2f53700df17bf52332056c1e85b23bcf64c77e57 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 16 Jan 2012 12:51:18 -0600 Subject: staging: drm/omap: updates for DSS fifomerge API changes Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_crtc.c | 2 +- drivers/staging/omapdrm/omap_drv.h | 6 ++++++ drivers/staging/omapdrm/omap_plane.c | 33 ++++++++++++++++++++++++--------- 3 files changed, 31 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c index 3cee04edcec8..17ca163e5896 100644 --- a/drivers/staging/omapdrm/omap_crtc.c +++ b/drivers/staging/omapdrm/omap_crtc.c @@ -81,7 +81,7 @@ static int omap_crtc_mode_set(struct drm_crtc *crtc, struct omap_crtc *omap_crtc = to_omap_crtc(crtc); struct drm_plane *plane = omap_crtc->plane; - return plane->funcs->update_plane(plane, crtc, crtc->fb, + return omap_plane_mode_set(plane, crtc, crtc->fb, 0, 0, mode->hdisplay, mode->vdisplay, x << 16, y << 16, mode->hdisplay << 16, mode->vdisplay << 16); diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h index 48f6fce614b6..61fe022dda5b 100644 --- a/drivers/staging/omapdrm/omap_drv.h +++ b/drivers/staging/omapdrm/omap_drv.h @@ -69,6 +69,12 @@ struct drm_plane *omap_plane_init(struct drm_device *dev, struct omap_overlay *ovl, unsigned int possible_crtcs, bool priv); int omap_plane_dpms(struct drm_plane *plane, int mode); +int omap_plane_mode_set(struct drm_plane *plane, + struct drm_crtc *crtc, struct drm_framebuffer *fb, + int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h); struct drm_encoder *omap_encoder_init(struct drm_device *dev, struct omap_overlay_manager *mgr); diff --git a/drivers/staging/omapdrm/omap_plane.c b/drivers/staging/omapdrm/omap_plane.c index 66eed75e634d..97909124a1fe 100644 --- a/drivers/staging/omapdrm/omap_plane.c +++ b/drivers/staging/omapdrm/omap_plane.c @@ -85,7 +85,7 @@ static int commit(struct drm_plane *plane) } } - if (info->enabled) { + if (ovl->is_enabled(ovl)) { omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y, info->out_width, info->out_height); } @@ -115,7 +115,7 @@ static void update_manager(struct drm_plane *plane) } if (ovl->manager != mgr) { - bool enabled = omap_plane->info.enabled; + bool enabled = ovl->is_enabled(ovl); /* don't switch things around with enabled overlays: */ if (enabled) @@ -168,7 +168,8 @@ static void update_scanout(struct drm_plane *plane) if (ret) { dev_err(plane->dev->dev, "could not pin fb: %d\n", ret); - omap_plane->info.enabled = false; + omap_plane_dpms(plane, DRM_MODE_DPMS_OFF); + return; } omap_framebuffer_update_scanout(plane->fb, @@ -180,7 +181,7 @@ static void update_scanout(struct drm_plane *plane) info->screen_width); } -static int omap_plane_update(struct drm_plane *plane, +int omap_plane_mode_set(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int crtc_x, int crtc_y, unsigned int crtc_w, unsigned int crtc_h, @@ -195,7 +196,6 @@ static int omap_plane_update(struct drm_plane *plane, src_w = src_w >> 16; src_h = src_h >> 16; - omap_plane->info.enabled = true; omap_plane->info.pos_x = crtc_x; omap_plane->info.pos_y = crtc_y; omap_plane->info.out_width = crtc_w; @@ -214,11 +214,22 @@ static int omap_plane_update(struct drm_plane *plane, update_scanout(plane); update_manager(plane); - commit(plane); return 0; } +static int omap_plane_update(struct drm_plane *plane, + struct drm_crtc *crtc, struct drm_framebuffer *fb, + int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h) +{ + omap_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, + src_x, src_y, src_w, src_h); + return omap_plane_dpms(plane, DRM_MODE_DPMS_ON); +} + static int omap_plane_disable(struct drm_plane *plane) { return omap_plane_dpms(plane, DRM_MODE_DPMS_OFF); @@ -236,18 +247,22 @@ static void omap_plane_destroy(struct drm_plane *plane) int omap_plane_dpms(struct drm_plane *plane, int mode) { struct omap_plane *omap_plane = to_omap_plane(plane); + struct omap_overlay *ovl = omap_plane->ovl; + int r; DBG("%s: %d", omap_plane->ovl->name, mode); if (mode == DRM_MODE_DPMS_ON) { update_scanout(plane); - omap_plane->info.enabled = true; + r = commit(plane); + if (!r) + r = ovl->enable(ovl); } else { - omap_plane->info.enabled = false; + r = ovl->disable(ovl); update_pin(plane, NULL); } - return commit(plane); + return r; } static const struct drm_plane_funcs omap_plane_funcs = { -- cgit v1.2.3-55-g7522 From 6b8ca4cf53e04f377944228b66ddc7d5d593e705 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Sun, 8 Jan 2012 19:37:37 -0600 Subject: staging: drm/omap: fix minimum width/height Fix minimum width/height so planes could be used to implement hw mouse cursor. Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c index 2de99ffecc51..3bbea9aac404 100644 --- a/drivers/staging/omapdrm/omap_drv.c +++ b/drivers/staging/omapdrm/omap_drv.c @@ -390,8 +390,8 @@ static int omap_modeset_init(struct drm_device *dev) dump_video_chains(); - dev->mode_config.min_width = 256; - dev->mode_config.min_height = 256; + dev->mode_config.min_width = 32; + dev->mode_config.min_height = 32; /* note: eventually will need some cpu_is_omapXYZ() type stuff here * to fill in these limits properly on different OMAP generations.. -- cgit v1.2.3-55-g7522 From a9e8d70c1ac6c9ccf6852c91e082e28249564e6e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jan 2012 08:51:03 +0100 Subject: drivers/staging/omapdrm/omap_fbdev.c: move free after uses Move the free after the final uses. The semantic patch that makes this report is available in scripts/coccinelle/free/kfree.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_fbdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c index ba4530697fe8..96940bbfc6f4 100644 --- a/drivers/staging/omapdrm/omap_fbdev.c +++ b/drivers/staging/omapdrm/omap_fbdev.c @@ -377,11 +377,11 @@ void omap_fbdev_free(struct drm_device *dev) fbdev = to_omap_fbdev(priv->fbdev); - kfree(fbdev); - /* this will free the backing object */ if (fbdev->fb) fbdev->fb->funcs->destroy(fbdev->fb); + kfree(fbdev); + priv->fbdev = NULL; } -- cgit v1.2.3-55-g7522 From c5b1247bd1c3ab6722acfa95213be9a16bfb664c Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 18 Jan 2012 18:33:02 -0600 Subject: staging: drm/omap: fix locking issue The create/free mmap offset code must be synchronized. Yet only some callers of omap_gem_mmap_offset() held struct_mutex. Leading to various crashes around drm_mm_insert_helper_range(). (In the free-object path, which is currently the only place we drm_gem_free_mmap_offset(), struct_mutex is already held.) Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_gem.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c index ae1ad357f7f2..b7d6f886c5cf 100644 --- a/drivers/staging/omapdrm/omap_gem.c +++ b/drivers/staging/omapdrm/omap_gem.c @@ -116,6 +116,9 @@ struct omap_gem_object { } *sync; }; +static int get_pages(struct drm_gem_object *obj, struct page ***pages); +static uint64_t mmap_offset(struct drm_gem_object *obj); + /* To deal with userspace mmap'ings of 2d tiled buffers, which (a) are * not necessarily pinned in TILER all the time, and (b) when they are * they are not necessarily page aligned, we reserve one or more small @@ -149,7 +152,7 @@ static void evict_entry(struct drm_gem_object *obj, { if (obj->dev->dev_mapping) { size_t size = PAGE_SIZE * usergart[fmt].height; - loff_t off = omap_gem_mmap_offset(obj) + + loff_t off = mmap_offset(obj) + (entry->obj_pgoff << PAGE_SHIFT); unmap_mapping_range(obj->dev->dev_mapping, off, size, 1); } @@ -189,8 +192,6 @@ static inline bool is_shmem(struct drm_gem_object *obj) return obj->filp != NULL; } -static int get_pages(struct drm_gem_object *obj, struct page ***pages); - static DEFINE_SPINLOCK(sync_lock); /** ensure backing pages are allocated */ @@ -251,7 +252,7 @@ static void omap_gem_detach_pages(struct drm_gem_object *obj) } /** get mmap offset */ -uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj) +static uint64_t mmap_offset(struct drm_gem_object *obj) { if (!obj->map_list.map) { /* Make it mmapable */ @@ -267,6 +268,15 @@ uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj) return (uint64_t)obj->map_list.hash.key << PAGE_SHIFT; } +uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj) +{ + uint64_t offset; + mutex_lock(&obj->dev->struct_mutex); + offset = mmap_offset(obj); + mutex_unlock(&obj->dev->struct_mutex); + return offset; +} + /** get mmap size */ size_t omap_gem_mmap_size(struct drm_gem_object *obj) { -- cgit v1.2.3-55-g7522 From 9256a4789be3dae37d00924c03546ba7958ea5a3 Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Wed, 25 Jan 2012 14:32:51 -0800 Subject: zcache: fix deadlock condition I discovered this deadlock condition awhile ago working on RAMster but it affects zcache as well. The list spinlock must be locked prior to the page spinlock and released after. As a result, the page copy must also be done while the locks are held. Applies to 3.2. Konrad, please push (via GregKH?)... this is definitely a bug fix so need not be pushed during a -rc0 window. Signed-off-by: Dan Magenheimer Acked-by: Konrad Rzeszutek Wilk Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/zcache-main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index 642840c612ac..ae0ed82dd3cb 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -358,8 +358,8 @@ static struct zbud_hdr *zbud_create(uint16_t client_id, uint16_t pool_id, if (unlikely(zbpg == NULL)) goto out; /* ok, have a page, now compress the data before taking locks */ - spin_lock(&zbpg->lock); spin_lock(&zbud_budlists_spinlock); + spin_lock(&zbpg->lock); list_add_tail(&zbpg->bud_list, &zbud_unbuddied[nchunks].list); zbud_unbuddied[nchunks].count++; zh = &zbpg->buddy[0]; @@ -389,12 +389,11 @@ init_zh: zh->oid = *oid; zh->pool_id = pool_id; zh->client_id = client_id; - /* can wait to copy the data until the list locks are dropped */ - spin_unlock(&zbud_budlists_spinlock); - to = zbud_data(zh, size); memcpy(to, cdata, size); spin_unlock(&zbpg->lock); + spin_unlock(&zbud_budlists_spinlock); + zbud_cumul_chunk_counts[nchunks]++; atomic_inc(&zcache_zbud_curr_zpages); zcache_zbud_cumul_zpages++; -- cgit v1.2.3-55-g7522 From e8b4553457e78bcff90f70a31212a40a8fd4f0db Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Mon, 23 Jan 2012 16:52:20 -0500 Subject: zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention. SWIZ_BITS > 8 results in a much larger number of "tmem_obj" allocations, likely one per page-placed-in-frontswap. The tmem_obj is not huge (roughly 100 bytes), but it is large enough to add a not-insignificant memory overhead to zcache. The SWIZ_BITS=8 will get roughly the same lock contention without the space wastage. The effect of SWIZ_BITS can be thought of as "2^SWIZ_BITS is the number of unique oids that be generated" (This concept is limited to frontswap's use of tmem). Acked-by: Seth Jennings Signed-off-by: Konrad Rzeszutek Wilk Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/zcache-main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index ae0ed82dd3cb..ce07087750a6 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1781,9 +1781,9 @@ static int zcache_frontswap_poolid = -1; * Swizzling increases objects per swaptype, increasing tmem concurrency * for heavy swaploads. Later, larger nr_cpus -> larger SWIZ_BITS * Setting SWIZ_BITS to 27 basically reconstructs the swap entry from - * frontswap_get_page() + * frontswap_get_page(), but has side-effects. Hence using 8. */ -#define SWIZ_BITS 27 +#define SWIZ_BITS 8 #define SWIZ_MASK ((1 << SWIZ_BITS) - 1) #define _oswiz(_type, _ind) ((_type << SWIZ_BITS) | (_ind & SWIZ_MASK)) #define iswiz(_ind) (_ind >> SWIZ_BITS) -- cgit v1.2.3-55-g7522 From 1793bf1deddc8ce25dc41925d5dbe64536c841b6 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 7 Jan 2012 10:07:03 -0600 Subject: staging: r8712u: Add new Sitecom UsB ID Add USB ID for SITECOM WLA-1000 V1 001 WLAN Reported-and-tested-by: Roland Gruber Reported-and-tested-by: Dario Lucia Signed-off-by: Larry Finger Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/usb_intf.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index 5385da2e9cdb..8de0c80ebf8a 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -89,6 +89,7 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = { {USB_DEVICE(0x0DF6, 0x0045)}, {USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */ {USB_DEVICE(0x0DF6, 0x004B)}, + {USB_DEVICE(0x0DF6, 0x005B)}, {USB_DEVICE(0x0DF6, 0x005D)}, {USB_DEVICE(0x0DF6, 0x0063)}, /* Sweex */ -- cgit v1.2.3-55-g7522 From 3c1b86f17068cf6476fb2d022b9c8b44dedea2e5 Mon Sep 17 00:00:00 2001 From: Arve Hjønnevåg Date: Fri, 20 Jan 2012 19:56:21 -0800 Subject: Staging: android: binder: Don't call dump_stack in binder_vma_open If user-space partially unmaps the driver, binder_vma_open would dump the kernel stack. This is not a kernel bug however and will be treated as if the whole area was unmapped once binder_vma_close gets called. Signed-off-by: Arve Hjønnevåg Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/binder.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 7491801a661c..48cf27cdb51a 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -2759,7 +2759,6 @@ static void binder_vma_open(struct vm_area_struct *vma) proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, (unsigned long)pgprot_val(vma->vm_page_prot)); - dump_stack(); } static void binder_vma_close(struct vm_area_struct *vma) -- cgit v1.2.3-55-g7522 From 635032cb397b396241372fa0ff36ae758e658b23 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Sun, 22 Jan 2012 16:33:46 +0200 Subject: Staging: asus_oled: fix image processing Programming an image was broken, because odev->buf_offs was not advanced for val == 0 in append_values(). This regression was introduced in: commit 1ff12a4aa354bed093a0240d5e6347b1e27601bc Author: Kevin A. Granade Date: Sat Sep 5 01:03:39 2009 -0500 Staging: asus_oled: Cleaned up checkpatch issues. Fix the image processing by special-casing val == 0. I have tested this change on an Asus G50V laptop only. Cc: Jakub Schmidtke Cc: Kevin A. Granade Signed-off-by: Pekka Paalanen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/asus_oled/asus_oled.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index e77e4e0396cf..2fdc5db68e1a 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -355,7 +355,14 @@ static void send_data(struct asus_oled_dev *odev) static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count) { - while (count-- > 0 && val) { + odev->last_val = val; + + if (val == 0) { + odev->buf_offs += count; + return 0; + } + + while (count-- > 0) { size_t x = odev->buf_offs % odev->width; size_t y = odev->buf_offs / odev->width; size_t i; @@ -406,7 +413,6 @@ static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count) ; } - odev->last_val = val; odev->buf_offs++; } -- cgit v1.2.3-55-g7522 From 3589e74595a4332ebf77b5ed006f3c6686071ecd Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Sun, 22 Jan 2012 16:33:47 +0200 Subject: Staging: asus_oled: fix NULL-ptr crash on unloading Asus_oled triggers the following bug on module unloading: usbcore: deregistering interface driver asus-oled BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: [] sysfs_delete_link+0x30/0x66 Call Trace: [] device_remove_class_symlinks+0x6b/0x70 [] device_del+0x9f/0x1ab [] device_unregister+0x11/0x1e [] asus_oled_disconnect+0x4f/0x9e [asus_oled] [] usb_unbind_interface+0x54/0x103 [] __device_release_driver+0xa2/0xeb [] driver_detach+0x87/0xad [] bus_remove_driver+0x91/0xc1 [] driver_unregister+0x66/0x6e [] usb_deregister+0xbb/0xc4 [] asus_oled_exit+0x2f/0x31 [asus_oled] [] sys_delete_module+0x1b8/0x21b [] ? do_munmap+0x2ef/0x313 [] system_call_fastpath+0x16/0x1b This is due to an incorrect destruction sequence in asus_oled_exit(). Fix the order, fixes the bug. Tested on an Asus G50V laptop only. Cc: Jakub Schmidtke Signed-off-by: Pekka Paalanen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/asus_oled/asus_oled.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 2fdc5db68e1a..1df9586f2730 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -811,10 +811,9 @@ error: static void __exit asus_oled_exit(void) { + usb_deregister(&oled_driver); class_remove_file(oled_class, &class_attr_version.attr); class_destroy(oled_class); - - usb_deregister(&oled_driver); } module_init(asus_oled_init); -- cgit v1.2.3-55-g7522 From b0d017e80e9f4e6b37e699b9a944646e64deb473 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 27 Jan 2012 11:40:10 -0700 Subject: Staging: android: Remove pmem driver Addroid pmem driver is no longer used in any of the Android products. This patch removes pmem driver from Android staging area Reference: https://lkml.org/lkml/2012/1/23/183 Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/Kconfig | 4 - drivers/staging/android/Makefile | 1 - drivers/staging/android/android_pmem.h | 93 --- drivers/staging/android/pmem.c | 1345 -------------------------------- 4 files changed, 1443 deletions(-) delete mode 100644 drivers/staging/android/android_pmem.h delete mode 100644 drivers/staging/android/pmem.c (limited to 'drivers') diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index becf711117ef..94cb2ac9624e 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -99,10 +99,6 @@ config ANDROID_LOW_MEMORY_KILLER ---help--- Register processes to be killed when memory is low -config ANDROID_PMEM - bool "Android pmem allocator" - depends on ARM - source "drivers/staging/android/switch/Kconfig" endif # if ANDROID diff --git a/drivers/staging/android/Makefile b/drivers/staging/android/Makefile index eaed1ff64f0f..5fcc24ffdd58 100644 --- a/drivers/staging/android/Makefile +++ b/drivers/staging/android/Makefile @@ -5,5 +5,4 @@ obj-$(CONFIG_ANDROID_RAM_CONSOLE) += ram_console.o obj-$(CONFIG_ANDROID_TIMED_OUTPUT) += timed_output.o obj-$(CONFIG_ANDROID_TIMED_GPIO) += timed_gpio.o obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER) += lowmemorykiller.o -obj-$(CONFIG_ANDROID_PMEM) += pmem.o obj-$(CONFIG_ANDROID_SWITCH) += switch/ diff --git a/drivers/staging/android/android_pmem.h b/drivers/staging/android/android_pmem.h deleted file mode 100644 index f633621f5be3..000000000000 --- a/drivers/staging/android/android_pmem.h +++ /dev/null @@ -1,93 +0,0 @@ -/* include/linux/android_pmem.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _ANDROID_PMEM_H_ -#define _ANDROID_PMEM_H_ - -#define PMEM_IOCTL_MAGIC 'p' -#define PMEM_GET_PHYS _IOW(PMEM_IOCTL_MAGIC, 1, unsigned int) -#define PMEM_MAP _IOW(PMEM_IOCTL_MAGIC, 2, unsigned int) -#define PMEM_GET_SIZE _IOW(PMEM_IOCTL_MAGIC, 3, unsigned int) -#define PMEM_UNMAP _IOW(PMEM_IOCTL_MAGIC, 4, unsigned int) -/* This ioctl will allocate pmem space, backing the file, it will fail - * if the file already has an allocation, pass it the len as the argument - * to the ioctl */ -#define PMEM_ALLOCATE _IOW(PMEM_IOCTL_MAGIC, 5, unsigned int) -/* This will connect a one pmem file to another, pass the file that is already - * backed in memory as the argument to the ioctl - */ -#define PMEM_CONNECT _IOW(PMEM_IOCTL_MAGIC, 6, unsigned int) -/* Returns the total size of the pmem region it is sent to as a pmem_region - * struct (with offset set to 0). - */ -#define PMEM_GET_TOTAL_SIZE _IOW(PMEM_IOCTL_MAGIC, 7, unsigned int) -#define PMEM_CACHE_FLUSH _IOW(PMEM_IOCTL_MAGIC, 8, unsigned int) - -struct android_pmem_platform_data -{ - const char* name; - /* starting physical address of memory region */ - unsigned long start; - /* size of memory region */ - unsigned long size; - /* set to indicate the region should not be managed with an allocator */ - unsigned no_allocator; - /* set to indicate maps of this region should be cached, if a mix of - * cached and uncached is desired, set this and open the device with - * O_SYNC to get an uncached region */ - unsigned cached; - /* The MSM7k has bits to enable a write buffer in the bus controller*/ - unsigned buffered; -}; - -struct pmem_region { - unsigned long offset; - unsigned long len; -}; - -#ifdef CONFIG_ANDROID_PMEM -int is_pmem_file(struct file *file); -int get_pmem_file(int fd, unsigned long *start, unsigned long *vstart, - unsigned long *end, struct file **filp); -int get_pmem_user_addr(struct file *file, unsigned long *start, - unsigned long *end); -void put_pmem_file(struct file* file); -void flush_pmem_file(struct file *file, unsigned long start, unsigned long len); -int pmem_setup(struct android_pmem_platform_data *pdata, - long (*ioctl)(struct file *, unsigned int, unsigned long), - int (*release)(struct inode *, struct file *)); -int pmem_remap(struct pmem_region *region, struct file *file, - unsigned operation); - -#else -static inline int is_pmem_file(struct file *file) { return 0; } -static inline int get_pmem_file(int fd, unsigned long *start, - unsigned long *vstart, unsigned long *end, - struct file **filp) { return -ENOSYS; } -static inline int get_pmem_user_addr(struct file *file, unsigned long *start, - unsigned long *end) { return -ENOSYS; } -static inline void put_pmem_file(struct file* file) { return; } -static inline void flush_pmem_file(struct file *file, unsigned long start, - unsigned long len) { return; } -static inline int pmem_setup(struct android_pmem_platform_data *pdata, - long (*ioctl)(struct file *, unsigned int, unsigned long), - int (*release)(struct inode *, struct file *)) { return -ENOSYS; } - -static inline int pmem_remap(struct pmem_region *region, struct file *file, - unsigned operation) { return -ENOSYS; } -#endif - -#endif //_ANDROID_PPP_H_ - diff --git a/drivers/staging/android/pmem.c b/drivers/staging/android/pmem.c deleted file mode 100644 index 7d97032c6508..000000000000 --- a/drivers/staging/android/pmem.c +++ /dev/null @@ -1,1345 +0,0 @@ -/* pmem.c - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "android_pmem.h" - -#define PMEM_MAX_DEVICES 10 -#define PMEM_MAX_ORDER 128 -#define PMEM_MIN_ALLOC PAGE_SIZE - -#define PMEM_DEBUG 1 - -/* indicates that a refernce to this file has been taken via get_pmem_file, - * the file should not be released until put_pmem_file is called */ -#define PMEM_FLAGS_BUSY 0x1 -/* indicates that this is a suballocation of a larger master range */ -#define PMEM_FLAGS_CONNECTED 0x1 << 1 -/* indicates this is a master and not a sub allocation and that it is mmaped */ -#define PMEM_FLAGS_MASTERMAP 0x1 << 2 -/* submap and unsubmap flags indicate: - * 00: subregion has never been mmaped - * 10: subregion has been mmaped, reference to the mm was taken - * 11: subretion has ben released, refernece to the mm still held - * 01: subretion has been released, reference to the mm has been released - */ -#define PMEM_FLAGS_SUBMAP 0x1 << 3 -#define PMEM_FLAGS_UNSUBMAP 0x1 << 4 - - -struct pmem_data { - /* in alloc mode: an index into the bitmap - * in no_alloc mode: the size of the allocation */ - int index; - /* see flags above for descriptions */ - unsigned int flags; - /* protects this data field, if the mm_mmap sem will be held at the - * same time as this sem, the mm sem must be taken first (as this is - * the order for vma_open and vma_close ops */ - struct rw_semaphore sem; - /* info about the mmaping process */ - struct vm_area_struct *vma; - /* task struct of the mapping process */ - struct task_struct *task; - /* process id of teh mapping process */ - pid_t pid; - /* file descriptor of the master */ - int master_fd; - /* file struct of the master */ - struct file *master_file; - /* a list of currently available regions if this is a suballocation */ - struct list_head region_list; - /* a linked list of data so we can access them for debugging */ - struct list_head list; -#if PMEM_DEBUG - int ref; -#endif -}; - -struct pmem_bits { - unsigned allocated:1; /* 1 if allocated, 0 if free */ - unsigned order:7; /* size of the region in pmem space */ -}; - -struct pmem_region_node { - struct pmem_region region; - struct list_head list; -}; - -#define PMEM_DEBUG_MSGS 0 -#if PMEM_DEBUG_MSGS -#define DLOG(fmt,args...) \ - do { printk(KERN_INFO "[%s:%s:%d] "fmt, __FILE__, __func__, __LINE__, \ - ##args); } \ - while (0) -#else -#define DLOG(x...) do {} while (0) -#endif - -struct pmem_info { - struct miscdevice dev; - /* physical start address of the remaped pmem space */ - unsigned long base; - /* vitual start address of the remaped pmem space */ - unsigned char __iomem *vbase; - /* total size of the pmem space */ - unsigned long size; - /* number of entries in the pmem space */ - unsigned long num_entries; - /* pfn of the garbage page in memory */ - unsigned long garbage_pfn; - /* index of the garbage page in the pmem space */ - int garbage_index; - /* the bitmap for the region indicating which entries are allocated - * and which are free */ - struct pmem_bits *bitmap; - /* indicates the region should not be managed with an allocator */ - unsigned no_allocator; - /* indicates maps of this region should be cached, if a mix of - * cached and uncached is desired, set this and open the device with - * O_SYNC to get an uncached region */ - unsigned cached; - unsigned buffered; - /* in no_allocator mode the first mapper gets the whole space and sets - * this flag */ - unsigned allocated; - /* for debugging, creates a list of pmem file structs, the - * data_list_lock should be taken before pmem_data->sem if both are - * needed */ - struct mutex data_list_lock; - struct list_head data_list; - /* pmem_sem protects the bitmap array - * a write lock should be held when modifying entries in bitmap - * a read lock should be held when reading data from bits or - * dereferencing a pointer into bitmap - * - * pmem_data->sem protects the pmem data of a particular file - * Many of the function that require the pmem_data->sem have a non- - * locking version for when the caller is already holding that sem. - * - * IF YOU TAKE BOTH LOCKS TAKE THEM IN THIS ORDER: - * down(pmem_data->sem) => down(bitmap_sem) - */ - struct rw_semaphore bitmap_sem; - - long (*ioctl)(struct file *, unsigned int, unsigned long); - int (*release)(struct inode *, struct file *); -}; - -static struct pmem_info pmem[PMEM_MAX_DEVICES]; -static int id_count; - -#define PMEM_IS_FREE(id, index) !(pmem[id].bitmap[index].allocated) -#define PMEM_ORDER(id, index) pmem[id].bitmap[index].order -#define PMEM_BUDDY_INDEX(id, index) (index ^ (1 << PMEM_ORDER(id, index))) -#define PMEM_NEXT_INDEX(id, index) (index + (1 << PMEM_ORDER(id, index))) -#define PMEM_OFFSET(index) (index * PMEM_MIN_ALLOC) -#define PMEM_START_ADDR(id, index) (PMEM_OFFSET(index) + pmem[id].base) -#define PMEM_LEN(id, index) ((1 << PMEM_ORDER(id, index)) * PMEM_MIN_ALLOC) -#define PMEM_END_ADDR(id, index) (PMEM_START_ADDR(id, index) + \ - PMEM_LEN(id, index)) -#define PMEM_START_VADDR(id, index) (PMEM_OFFSET(id, index) + pmem[id].vbase) -#define PMEM_END_VADDR(id, index) (PMEM_START_VADDR(id, index) + \ - PMEM_LEN(id, index)) -#define PMEM_REVOKED(data) (data->flags & PMEM_FLAGS_REVOKED) -#define PMEM_IS_PAGE_ALIGNED(addr) (!((addr) & (~PAGE_MASK))) -#define PMEM_IS_SUBMAP(data) ((data->flags & PMEM_FLAGS_SUBMAP) && \ - (!(data->flags & PMEM_FLAGS_UNSUBMAP))) - -static int pmem_release(struct inode *, struct file *); -static int pmem_mmap(struct file *, struct vm_area_struct *); -static int pmem_open(struct inode *, struct file *); -static long pmem_ioctl(struct file *, unsigned int, unsigned long); - -struct file_operations pmem_fops = { - .release = pmem_release, - .mmap = pmem_mmap, - .open = pmem_open, - .unlocked_ioctl = pmem_ioctl, -}; - -static int get_id(struct file *file) -{ - return MINOR(file->f_dentry->d_inode->i_rdev); -} - -int is_pmem_file(struct file *file) -{ - int id; - - if (unlikely(!file || !file->f_dentry || !file->f_dentry->d_inode)) - return 0; - id = get_id(file); - if (unlikely(id >= PMEM_MAX_DEVICES)) - return 0; - if (unlikely(file->f_dentry->d_inode->i_rdev != - MKDEV(MISC_MAJOR, pmem[id].dev.minor))) - return 0; - return 1; -} - -static int has_allocation(struct file *file) -{ - struct pmem_data *data; - /* check is_pmem_file first if not accessed via pmem_file_ops */ - - if (unlikely(!file->private_data)) - return 0; - data = (struct pmem_data *)file->private_data; - if (unlikely(data->index < 0)) - return 0; - return 1; -} - -static int is_master_owner(struct file *file) -{ - struct file *master_file; - struct pmem_data *data; - int put_needed, ret = 0; - - if (!is_pmem_file(file) || !has_allocation(file)) - return 0; - data = (struct pmem_data *)file->private_data; - if (PMEM_FLAGS_MASTERMAP & data->flags) - return 1; - master_file = fget_light(data->master_fd, &put_needed); - if (master_file && data->master_file == master_file) - ret = 1; - fput_light(master_file, put_needed); - return ret; -} - -static int pmem_free(int id, int index) -{ - /* caller should hold the write lock on pmem_sem! */ - int buddy, curr = index; - DLOG("index %d\n", index); - - if (pmem[id].no_allocator) { - pmem[id].allocated = 0; - return 0; - } - /* clean up the bitmap, merging any buddies */ - pmem[id].bitmap[curr].allocated = 0; - /* find a slots buddy Buddy# = Slot# ^ (1 << order) - * if the buddy is also free merge them - * repeat until the buddy is not free or end of the bitmap is reached - */ - do { - buddy = PMEM_BUDDY_INDEX(id, curr); - if (PMEM_IS_FREE(id, buddy) && - PMEM_ORDER(id, buddy) == PMEM_ORDER(id, curr)) { - PMEM_ORDER(id, buddy)++; - PMEM_ORDER(id, curr)++; - curr = min(buddy, curr); - } else { - break; - } - } while (curr < pmem[id].num_entries); - - return 0; -} - -static void pmem_revoke(struct file *file, struct pmem_data *data); - -static int pmem_release(struct inode *inode, struct file *file) -{ - struct pmem_data *data = (struct pmem_data *)file->private_data; - struct pmem_region_node *region_node; - struct list_head *elt, *elt2; - int id = get_id(file), ret = 0; - - - mutex_lock(&pmem[id].data_list_lock); - /* if this file is a master, revoke all the memory in the connected - * files */ - if (PMEM_FLAGS_MASTERMAP & data->flags) { - struct pmem_data *sub_data; - list_for_each(elt, &pmem[id].data_list) { - sub_data = list_entry(elt, struct pmem_data, list); - down_read(&sub_data->sem); - if (PMEM_IS_SUBMAP(sub_data) && - file == sub_data->master_file) { - up_read(&sub_data->sem); - pmem_revoke(file, sub_data); - } else - up_read(&sub_data->sem); - } - } - list_del(&data->list); - mutex_unlock(&pmem[id].data_list_lock); - - - down_write(&data->sem); - - /* if its not a conencted file and it has an allocation, free it */ - if (!(PMEM_FLAGS_CONNECTED & data->flags) && has_allocation(file)) { - down_write(&pmem[id].bitmap_sem); - ret = pmem_free(id, data->index); - up_write(&pmem[id].bitmap_sem); - } - - /* if this file is a submap (mapped, connected file), downref the - * task struct */ - if (PMEM_FLAGS_SUBMAP & data->flags) - if (data->task) { - put_task_struct(data->task); - data->task = NULL; - } - - file->private_data = NULL; - - list_for_each_safe(elt, elt2, &data->region_list) { - region_node = list_entry(elt, struct pmem_region_node, list); - list_del(elt); - kfree(region_node); - } - BUG_ON(!list_empty(&data->region_list)); - - up_write(&data->sem); - kfree(data); - if (pmem[id].release) - ret = pmem[id].release(inode, file); - - return ret; -} - -static int pmem_open(struct inode *inode, struct file *file) -{ - struct pmem_data *data; - int id = get_id(file); - int ret = 0; - - DLOG("current %u file %p(%d)\n", current->pid, file, file_count(file)); - /* setup file->private_data to indicate its unmapped */ - /* you can only open a pmem device one time */ - if (file->private_data != NULL) - return -1; - data = kmalloc(sizeof(struct pmem_data), GFP_KERNEL); - if (!data) { - printk("pmem: unable to allocate memory for pmem metadata."); - return -1; - } - data->flags = 0; - data->index = -1; - data->task = NULL; - data->vma = NULL; - data->pid = 0; - data->master_file = NULL; -#if PMEM_DEBUG - data->ref = 0; -#endif - INIT_LIST_HEAD(&data->region_list); - init_rwsem(&data->sem); - - file->private_data = data; - INIT_LIST_HEAD(&data->list); - - mutex_lock(&pmem[id].data_list_lock); - list_add(&data->list, &pmem[id].data_list); - mutex_unlock(&pmem[id].data_list_lock); - return ret; -} - -static unsigned long pmem_order(unsigned long len) -{ - int i; - - len = (len + PMEM_MIN_ALLOC - 1)/PMEM_MIN_ALLOC; - len--; - for (i = 0; i < sizeof(len)*8; i++) - if (len >> i == 0) - break; - return i; -} - -static int pmem_allocate(int id, unsigned long len) -{ - /* caller should hold the write lock on pmem_sem! */ - /* return the corresponding pdata[] entry */ - int curr = 0; - int end = pmem[id].num_entries; - int best_fit = -1; - unsigned long order = pmem_order(len); - - if (pmem[id].no_allocator) { - DLOG("no allocator"); - if ((len > pmem[id].size) || pmem[id].allocated) - return -1; - pmem[id].allocated = 1; - return len; - } - - if (order > PMEM_MAX_ORDER) - return -1; - DLOG("order %lx\n", order); - - /* look through the bitmap: - * if you find a free slot of the correct order use it - * otherwise, use the best fit (smallest with size > order) slot - */ - while (curr < end) { - if (PMEM_IS_FREE(id, curr)) { - if (PMEM_ORDER(id, curr) == (unsigned char)order) { - /* set the not free bit and clear others */ - best_fit = curr; - break; - } - if (PMEM_ORDER(id, curr) > (unsigned char)order && - (best_fit < 0 || - PMEM_ORDER(id, curr) < PMEM_ORDER(id, best_fit))) - best_fit = curr; - } - curr = PMEM_NEXT_INDEX(id, curr); - } - - /* if best_fit < 0, there are no suitable slots, - * return an error - */ - if (best_fit < 0) { - printk("pmem: no space left to allocate!\n"); - return -1; - } - - /* now partition the best fit: - * split the slot into 2 buddies of order - 1 - * repeat until the slot is of the correct order - */ - while (PMEM_ORDER(id, best_fit) > (unsigned char)order) { - int buddy; - PMEM_ORDER(id, best_fit) -= 1; - buddy = PMEM_BUDDY_INDEX(id, best_fit); - PMEM_ORDER(id, buddy) = PMEM_ORDER(id, best_fit); - } - pmem[id].bitmap[best_fit].allocated = 1; - return best_fit; -} - -static pgprot_t pmem_access_prot(struct file *file, pgprot_t vma_prot) -{ - int id = get_id(file); -#ifdef pgprot_noncached - if (pmem[id].cached == 0 || file->f_flags & O_SYNC) - return pgprot_noncached(vma_prot); -#endif -#ifdef pgprot_ext_buffered - else if (pmem[id].buffered) - return pgprot_ext_buffered(vma_prot); -#endif - return vma_prot; -} - -static unsigned long pmem_start_addr(int id, struct pmem_data *data) -{ - if (pmem[id].no_allocator) - return PMEM_START_ADDR(id, 0); - else - return PMEM_START_ADDR(id, data->index); - -} - -static void *pmem_start_vaddr(int id, struct pmem_data *data) -{ - return pmem_start_addr(id, data) - pmem[id].base + pmem[id].vbase; -} - -static unsigned long pmem_len(int id, struct pmem_data *data) -{ - if (pmem[id].no_allocator) - return data->index; - else - return PMEM_LEN(id, data->index); -} - -static int pmem_map_garbage(int id, struct vm_area_struct *vma, - struct pmem_data *data, unsigned long offset, - unsigned long len) -{ - int i, garbage_pages = len >> PAGE_SHIFT; - - vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP | VM_SHARED | VM_WRITE; - for (i = 0; i < garbage_pages; i++) { - if (vm_insert_pfn(vma, vma->vm_start + offset + (i * PAGE_SIZE), - pmem[id].garbage_pfn)) - return -EAGAIN; - } - return 0; -} - -static int pmem_unmap_pfn_range(int id, struct vm_area_struct *vma, - struct pmem_data *data, unsigned long offset, - unsigned long len) -{ - int garbage_pages; - DLOG("unmap offset %lx len %lx\n", offset, len); - - BUG_ON(!PMEM_IS_PAGE_ALIGNED(len)); - - garbage_pages = len >> PAGE_SHIFT; - zap_page_range(vma, vma->vm_start + offset, len, NULL); - pmem_map_garbage(id, vma, data, offset, len); - return 0; -} - -static int pmem_map_pfn_range(int id, struct vm_area_struct *vma, - struct pmem_data *data, unsigned long offset, - unsigned long len) -{ - DLOG("map offset %lx len %lx\n", offset, len); - BUG_ON(!PMEM_IS_PAGE_ALIGNED(vma->vm_start)); - BUG_ON(!PMEM_IS_PAGE_ALIGNED(vma->vm_end)); - BUG_ON(!PMEM_IS_PAGE_ALIGNED(len)); - BUG_ON(!PMEM_IS_PAGE_ALIGNED(offset)); - - if (io_remap_pfn_range(vma, vma->vm_start + offset, - (pmem_start_addr(id, data) + offset) >> PAGE_SHIFT, - len, vma->vm_page_prot)) { - return -EAGAIN; - } - return 0; -} - -static int pmem_remap_pfn_range(int id, struct vm_area_struct *vma, - struct pmem_data *data, unsigned long offset, - unsigned long len) -{ - /* hold the mm semp for the vma you are modifying when you call this */ - BUG_ON(!vma); - zap_page_range(vma, vma->vm_start + offset, len, NULL); - return pmem_map_pfn_range(id, vma, data, offset, len); -} - -static void pmem_vma_open(struct vm_area_struct *vma) -{ - struct file *file = vma->vm_file; - struct pmem_data *data = file->private_data; - int id = get_id(file); - /* this should never be called as we don't support copying pmem - * ranges via fork */ - BUG_ON(!has_allocation(file)); - down_write(&data->sem); - /* remap the garbage pages, forkers don't get access to the data */ - pmem_unmap_pfn_range(id, vma, data, 0, vma->vm_start - vma->vm_end); - up_write(&data->sem); -} - -static void pmem_vma_close(struct vm_area_struct *vma) -{ - struct file *file = vma->vm_file; - struct pmem_data *data = file->private_data; - - DLOG("current %u ppid %u file %p count %d\n", current->pid, - current->parent->pid, file, file_count(file)); - if (unlikely(!is_pmem_file(file) || !has_allocation(file))) { - printk(KERN_WARNING "pmem: something is very wrong, you are " - "closing a vm backing an allocation that doesn't " - "exist!\n"); - return; - } - down_write(&data->sem); - if (data->vma == vma) { - data->vma = NULL; - if ((data->flags & PMEM_FLAGS_CONNECTED) && - (data->flags & PMEM_FLAGS_SUBMAP)) - data->flags |= PMEM_FLAGS_UNSUBMAP; - } - /* the kernel is going to free this vma now anyway */ - up_write(&data->sem); -} - -static struct vm_operations_struct vm_ops = { - .open = pmem_vma_open, - .close = pmem_vma_close, -}; - -static int pmem_mmap(struct file *file, struct vm_area_struct *vma) -{ - struct pmem_data *data; - int index; - unsigned long vma_size = vma->vm_end - vma->vm_start; - int ret = 0, id = get_id(file); - - if (vma->vm_pgoff || !PMEM_IS_PAGE_ALIGNED(vma_size)) { -#if PMEM_DEBUG - printk(KERN_ERR "pmem: mmaps must be at offset zero, aligned" - " and a multiple of pages_size.\n"); -#endif - return -EINVAL; - } - - data = (struct pmem_data *)file->private_data; - down_write(&data->sem); - /* check this file isn't already mmaped, for submaps check this file - * has never been mmaped */ - if ((data->flags & PMEM_FLAGS_SUBMAP) || - (data->flags & PMEM_FLAGS_UNSUBMAP)) { -#if PMEM_DEBUG - printk(KERN_ERR "pmem: you can only mmap a pmem file once, " - "this file is already mmaped. %x\n", data->flags); -#endif - ret = -EINVAL; - goto error; - } - /* if file->private_data == unalloced, alloc*/ - if (data && data->index == -1) { - down_write(&pmem[id].bitmap_sem); - index = pmem_allocate(id, vma->vm_end - vma->vm_start); - up_write(&pmem[id].bitmap_sem); - data->index = index; - } - /* either no space was available or an error occured */ - if (!has_allocation(file)) { - ret = -EINVAL; - printk("pmem: could not find allocation for map.\n"); - goto error; - } - - if (pmem_len(id, data) < vma_size) { -#if PMEM_DEBUG - printk(KERN_WARNING "pmem: mmap size [%lu] does not match" - "size of backing region [%lu].\n", vma_size, - pmem_len(id, data)); -#endif - ret = -EINVAL; - goto error; - } - - vma->vm_pgoff = pmem_start_addr(id, data) >> PAGE_SHIFT; - vma->vm_page_prot = pmem_access_prot(file, vma->vm_page_prot); - - if (data->flags & PMEM_FLAGS_CONNECTED) { - struct pmem_region_node *region_node; - struct list_head *elt; - if (pmem_map_garbage(id, vma, data, 0, vma_size)) { - printk("pmem: mmap failed in kernel!\n"); - ret = -EAGAIN; - goto error; - } - list_for_each(elt, &data->region_list) { - region_node = list_entry(elt, struct pmem_region_node, - list); - DLOG("remapping file: %p %lx %lx\n", file, - region_node->region.offset, - region_node->region.len); - if (pmem_remap_pfn_range(id, vma, data, - region_node->region.offset, - region_node->region.len)) { - ret = -EAGAIN; - goto error; - } - } - data->flags |= PMEM_FLAGS_SUBMAP; - get_task_struct(current->group_leader); - data->task = current->group_leader; - data->vma = vma; -#if PMEM_DEBUG - data->pid = current->pid; -#endif - DLOG("submmapped file %p vma %p pid %u\n", file, vma, - current->pid); - } else { - if (pmem_map_pfn_range(id, vma, data, 0, vma_size)) { - printk(KERN_INFO "pmem: mmap failed in kernel!\n"); - ret = -EAGAIN; - goto error; - } - data->flags |= PMEM_FLAGS_MASTERMAP; - data->pid = current->pid; - } - vma->vm_ops = &vm_ops; -error: - up_write(&data->sem); - return ret; -} - -/* the following are the api for accessing pmem regions by other drivers - * from inside the kernel */ -int get_pmem_user_addr(struct file *file, unsigned long *start, - unsigned long *len) -{ - struct pmem_data *data; - if (!is_pmem_file(file) || !has_allocation(file)) { -#if PMEM_DEBUG - printk(KERN_INFO "pmem: requested pmem data from invalid" - "file.\n"); -#endif - return -1; - } - data = (struct pmem_data *)file->private_data; - down_read(&data->sem); - if (data->vma) { - *start = data->vma->vm_start; - *len = data->vma->vm_end - data->vma->vm_start; - } else { - *start = 0; - *len = 0; - } - up_read(&data->sem); - return 0; -} - -int get_pmem_addr(struct file *file, unsigned long *start, - unsigned long *vstart, unsigned long *len) -{ - struct pmem_data *data; - int id; - - if (!is_pmem_file(file) || !has_allocation(file)) { - return -1; - } - - data = (struct pmem_data *)file->private_data; - if (data->index == -1) { -#if PMEM_DEBUG - printk(KERN_INFO "pmem: requested pmem data from file with no " - "allocation.\n"); - return -1; -#endif - } - id = get_id(file); - - down_read(&data->sem); - *start = pmem_start_addr(id, data); - *len = pmem_len(id, data); - *vstart = (unsigned long)pmem_start_vaddr(id, data); - up_read(&data->sem); -#if PMEM_DEBUG - down_write(&data->sem); - data->ref++; - up_write(&data->sem); -#endif - return 0; -} - -int get_pmem_file(int fd, unsigned long *start, unsigned long *vstart, - unsigned long *len, struct file **filp) -{ - struct file *file; - - file = fget(fd); - if (unlikely(file == NULL)) { - printk(KERN_INFO "pmem: requested data from file descriptor " - "that doesn't exist."); - return -1; - } - - if (get_pmem_addr(file, start, vstart, len)) - goto end; - - if (filp) - *filp = file; - return 0; -end: - fput(file); - return -1; -} - -void put_pmem_file(struct file *file) -{ - struct pmem_data *data; - int id; - - if (!is_pmem_file(file)) - return; - id = get_id(file); - data = (struct pmem_data *)file->private_data; -#if PMEM_DEBUG - down_write(&data->sem); - if (data->ref == 0) { - printk("pmem: pmem_put > pmem_get %s (pid %d)\n", - pmem[id].dev.name, data->pid); - BUG(); - } - data->ref--; - up_write(&data->sem); -#endif - fput(file); -} - -void flush_pmem_file(struct file *file, unsigned long offset, unsigned long len) -{ - struct pmem_data *data; - int id; - void *vaddr; - struct pmem_region_node *region_node; - struct list_head *elt; - void *flush_start, *flush_end; - - if (!is_pmem_file(file) || !has_allocation(file)) { - return; - } - - id = get_id(file); - data = (struct pmem_data *)file->private_data; - if (!pmem[id].cached || file->f_flags & O_SYNC) - return; - - down_read(&data->sem); - vaddr = pmem_start_vaddr(id, data); - /* if this isn't a submmapped file, flush the whole thing */ - if (unlikely(!(data->flags & PMEM_FLAGS_CONNECTED))) { - dmac_flush_range(vaddr, vaddr + pmem_len(id, data)); - goto end; - } - /* otherwise, flush the region of the file we are drawing */ - list_for_each(elt, &data->region_list) { - region_node = list_entry(elt, struct pmem_region_node, list); - if ((offset >= region_node->region.offset) && - ((offset + len) <= (region_node->region.offset + - region_node->region.len))) { - flush_start = vaddr + region_node->region.offset; - flush_end = flush_start + region_node->region.len; - dmac_flush_range(flush_start, flush_end); - break; - } - } -end: - up_read(&data->sem); -} - -static int pmem_connect(unsigned long connect, struct file *file) -{ - struct pmem_data *data = (struct pmem_data *)file->private_data; - struct pmem_data *src_data; - struct file *src_file; - int ret = 0, put_needed; - - down_write(&data->sem); - /* retrieve the src file and check it is a pmem file with an alloc */ - src_file = fget_light(connect, &put_needed); - DLOG("connect %p to %p\n", file, src_file); - if (!src_file) { - printk("pmem: src file not found!\n"); - ret = -EINVAL; - goto err_no_file; - } - if (unlikely(!is_pmem_file(src_file) || !has_allocation(src_file))) { - printk(KERN_INFO "pmem: src file is not a pmem file or has no " - "alloc!\n"); - ret = -EINVAL; - goto err_bad_file; - } - src_data = (struct pmem_data *)src_file->private_data; - - if (has_allocation(file) && (data->index != src_data->index)) { - printk("pmem: file is already mapped but doesn't match this" - " src_file!\n"); - ret = -EINVAL; - goto err_bad_file; - } - data->index = src_data->index; - data->flags |= PMEM_FLAGS_CONNECTED; - data->master_fd = connect; - data->master_file = src_file; - -err_bad_file: - fput_light(src_file, put_needed); -err_no_file: - up_write(&data->sem); - return ret; -} - -static void pmem_unlock_data_and_mm(struct pmem_data *data, - struct mm_struct *mm) -{ - up_write(&data->sem); - if (mm != NULL) { - up_write(&mm->mmap_sem); - mmput(mm); - } -} - -static int pmem_lock_data_and_mm(struct file *file, struct pmem_data *data, - struct mm_struct **locked_mm) -{ - int ret = 0; - struct mm_struct *mm = NULL; - *locked_mm = NULL; -lock_mm: - down_read(&data->sem); - if (PMEM_IS_SUBMAP(data)) { - mm = get_task_mm(data->task); - if (!mm) { -#if PMEM_DEBUG - printk("pmem: can't remap task is gone!\n"); -#endif - up_read(&data->sem); - return -1; - } - } - up_read(&data->sem); - - if (mm) - down_write(&mm->mmap_sem); - - down_write(&data->sem); - /* check that the file didn't get mmaped before we could take the - * data sem, this should be safe b/c you can only submap each file - * once */ - if (PMEM_IS_SUBMAP(data) && !mm) { - pmem_unlock_data_and_mm(data, mm); - up_write(&data->sem); - goto lock_mm; - } - /* now check that vma.mm is still there, it could have been - * deleted by vma_close before we could get the data->sem */ - if ((data->flags & PMEM_FLAGS_UNSUBMAP) && (mm != NULL)) { - /* might as well release this */ - if (data->flags & PMEM_FLAGS_SUBMAP) { - put_task_struct(data->task); - data->task = NULL; - /* lower the submap flag to show the mm is gone */ - data->flags &= ~(PMEM_FLAGS_SUBMAP); - } - pmem_unlock_data_and_mm(data, mm); - return -1; - } - *locked_mm = mm; - return ret; -} - -int pmem_remap(struct pmem_region *region, struct file *file, - unsigned operation) -{ - int ret; - struct pmem_region_node *region_node; - struct mm_struct *mm = NULL; - struct list_head *elt, *elt2; - int id = get_id(file); - struct pmem_data *data = (struct pmem_data *)file->private_data; - - /* pmem region must be aligned on a page boundry */ - if (unlikely(!PMEM_IS_PAGE_ALIGNED(region->offset) || - !PMEM_IS_PAGE_ALIGNED(region->len))) { -#if PMEM_DEBUG - printk("pmem: request for unaligned pmem suballocation " - "%lx %lx\n", region->offset, region->len); -#endif - return -EINVAL; - } - - /* if userspace requests a region of len 0, there's nothing to do */ - if (region->len == 0) - return 0; - - /* lock the mm and data */ - ret = pmem_lock_data_and_mm(file, data, &mm); - if (ret) - return 0; - - /* only the owner of the master file can remap the client fds - * that back in it */ - if (!is_master_owner(file)) { -#if PMEM_DEBUG - printk("pmem: remap requested from non-master process\n"); -#endif - ret = -EINVAL; - goto err; - } - - /* check that the requested range is within the src allocation */ - if (unlikely((region->offset > pmem_len(id, data)) || - (region->len > pmem_len(id, data)) || - (region->offset + region->len > pmem_len(id, data)))) { -#if PMEM_DEBUG - printk(KERN_INFO "pmem: suballoc doesn't fit in src_file!\n"); -#endif - ret = -EINVAL; - goto err; - } - - if (operation == PMEM_MAP) { - region_node = kmalloc(sizeof(struct pmem_region_node), - GFP_KERNEL); - if (!region_node) { - ret = -ENOMEM; -#if PMEM_DEBUG - printk(KERN_INFO "No space to allocate metadata!"); -#endif - goto err; - } - region_node->region = *region; - list_add(®ion_node->list, &data->region_list); - } else if (operation == PMEM_UNMAP) { - int found = 0; - list_for_each_safe(elt, elt2, &data->region_list) { - region_node = list_entry(elt, struct pmem_region_node, - list); - if (region->len == 0 || - (region_node->region.offset == region->offset && - region_node->region.len == region->len)) { - list_del(elt); - kfree(region_node); - found = 1; - } - } - if (!found) { -#if PMEM_DEBUG - printk("pmem: Unmap region does not map any mapped " - "region!"); -#endif - ret = -EINVAL; - goto err; - } - } - - if (data->vma && PMEM_IS_SUBMAP(data)) { - if (operation == PMEM_MAP) - ret = pmem_remap_pfn_range(id, data->vma, data, - region->offset, region->len); - else if (operation == PMEM_UNMAP) - ret = pmem_unmap_pfn_range(id, data->vma, data, - region->offset, region->len); - } - -err: - pmem_unlock_data_and_mm(data, mm); - return ret; -} - -static void pmem_revoke(struct file *file, struct pmem_data *data) -{ - struct pmem_region_node *region_node; - struct list_head *elt, *elt2; - struct mm_struct *mm = NULL; - int id = get_id(file); - int ret = 0; - - data->master_file = NULL; - ret = pmem_lock_data_and_mm(file, data, &mm); - /* if lock_data_and_mm fails either the task that mapped the fd, or - * the vma that mapped it have already gone away, nothing more - * needs to be done */ - if (ret) - return; - /* unmap everything */ - /* delete the regions and region list nothing is mapped any more */ - if (data->vma) - list_for_each_safe(elt, elt2, &data->region_list) { - region_node = list_entry(elt, struct pmem_region_node, - list); - pmem_unmap_pfn_range(id, data->vma, data, - region_node->region.offset, - region_node->region.len); - list_del(elt); - kfree(region_node); - } - /* delete the master file */ - pmem_unlock_data_and_mm(data, mm); -} - -static void pmem_get_size(struct pmem_region *region, struct file *file) -{ - struct pmem_data *data = (struct pmem_data *)file->private_data; - int id = get_id(file); - - if (!has_allocation(file)) { - region->offset = 0; - region->len = 0; - return; - } else { - region->offset = pmem_start_addr(id, data); - region->len = pmem_len(id, data); - } - DLOG("offset %lx len %lx\n", region->offset, region->len); -} - - -static long pmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct pmem_data *data; - int id = get_id(file); - - switch (cmd) { - case PMEM_GET_PHYS: - { - struct pmem_region region; - DLOG("get_phys\n"); - if (!has_allocation(file)) { - region.offset = 0; - region.len = 0; - } else { - data = (struct pmem_data *)file->private_data; - region.offset = pmem_start_addr(id, data); - region.len = pmem_len(id, data); - } - printk(KERN_INFO "pmem: request for physical address of pmem region " - "from process %d.\n", current->pid); - if (copy_to_user((void __user *)arg, ®ion, - sizeof(struct pmem_region))) - return -EFAULT; - break; - } - case PMEM_MAP: - { - struct pmem_region region; - if (copy_from_user(®ion, (void __user *)arg, - sizeof(struct pmem_region))) - return -EFAULT; - data = (struct pmem_data *)file->private_data; - return pmem_remap(®ion, file, PMEM_MAP); - } - break; - case PMEM_UNMAP: - { - struct pmem_region region; - if (copy_from_user(®ion, (void __user *)arg, - sizeof(struct pmem_region))) - return -EFAULT; - data = (struct pmem_data *)file->private_data; - return pmem_remap(®ion, file, PMEM_UNMAP); - break; - } - case PMEM_GET_SIZE: - { - struct pmem_region region; - DLOG("get_size\n"); - pmem_get_size(®ion, file); - if (copy_to_user((void __user *)arg, ®ion, - sizeof(struct pmem_region))) - return -EFAULT; - break; - } - case PMEM_GET_TOTAL_SIZE: - { - struct pmem_region region; - DLOG("get total size\n"); - region.offset = 0; - get_id(file); - region.len = pmem[id].size; - if (copy_to_user((void __user *)arg, ®ion, - sizeof(struct pmem_region))) - return -EFAULT; - break; - } - case PMEM_ALLOCATE: - { - if (has_allocation(file)) - return -EINVAL; - data = (struct pmem_data *)file->private_data; - data->index = pmem_allocate(id, arg); - break; - } - case PMEM_CONNECT: - DLOG("connect\n"); - return pmem_connect(arg, file); - break; - case PMEM_CACHE_FLUSH: - { - struct pmem_region region; - DLOG("flush\n"); - if (copy_from_user(®ion, (void __user *)arg, - sizeof(struct pmem_region))) - return -EFAULT; - flush_pmem_file(file, region.offset, region.len); - break; - } - default: - if (pmem[id].ioctl) - return pmem[id].ioctl(file, cmd, arg); - return -EINVAL; - } - return 0; -} - -#if PMEM_DEBUG -static ssize_t debug_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -static ssize_t debug_read(struct file *file, char __user *buf, size_t count, - loff_t *ppos) -{ - struct list_head *elt, *elt2; - struct pmem_data *data; - struct pmem_region_node *region_node; - int id = (int)file->private_data; - const int debug_bufmax = 4096; - static char buffer[4096]; - int n = 0; - - DLOG("debug open\n"); - n = scnprintf(buffer, debug_bufmax, - "pid #: mapped regions (offset, len) (offset,len)...\n"); - - mutex_lock(&pmem[id].data_list_lock); - list_for_each(elt, &pmem[id].data_list) { - data = list_entry(elt, struct pmem_data, list); - down_read(&data->sem); - n += scnprintf(buffer + n, debug_bufmax - n, "pid %u:", - data->pid); - list_for_each(elt2, &data->region_list) { - region_node = list_entry(elt2, struct pmem_region_node, - list); - n += scnprintf(buffer + n, debug_bufmax - n, - "(%lx,%lx) ", - region_node->region.offset, - region_node->region.len); - } - n += scnprintf(buffer + n, debug_bufmax - n, "\n"); - up_read(&data->sem); - } - mutex_unlock(&pmem[id].data_list_lock); - - n++; - buffer[n] = 0; - return simple_read_from_buffer(buf, count, ppos, buffer, n); -} - -static struct file_operations debug_fops = { - .read = debug_read, - .open = debug_open, -}; -#endif - -#if 0 -static struct miscdevice pmem_dev = { - .name = "pmem", - .fops = &pmem_fops, -}; -#endif - -int pmem_setup(struct android_pmem_platform_data *pdata, - long (*ioctl)(struct file *, unsigned int, unsigned long), - int (*release)(struct inode *, struct file *)) -{ - int err = 0; - int i, index = 0; - int id = id_count; - id_count++; - - pmem[id].no_allocator = pdata->no_allocator; - pmem[id].cached = pdata->cached; - pmem[id].buffered = pdata->buffered; - pmem[id].base = pdata->start; - pmem[id].size = pdata->size; - pmem[id].ioctl = ioctl; - pmem[id].release = release; - init_rwsem(&pmem[id].bitmap_sem); - mutex_init(&pmem[id].data_list_lock); - INIT_LIST_HEAD(&pmem[id].data_list); - pmem[id].dev.name = pdata->name; - pmem[id].dev.minor = id; - pmem[id].dev.fops = &pmem_fops; - printk(KERN_INFO "%s: %d init\n", pdata->name, pdata->cached); - - err = misc_register(&pmem[id].dev); - if (err) { - printk(KERN_ALERT "Unable to register pmem driver!\n"); - goto err_cant_register_device; - } - pmem[id].num_entries = pmem[id].size / PMEM_MIN_ALLOC; - - pmem[id].bitmap = kmalloc(pmem[id].num_entries * - sizeof(struct pmem_bits), GFP_KERNEL); - if (!pmem[id].bitmap) - goto err_no_mem_for_metadata; - - memset(pmem[id].bitmap, 0, sizeof(struct pmem_bits) * - pmem[id].num_entries); - - for (i = sizeof(pmem[id].num_entries) * 8 - 1; i >= 0; i--) { - if ((pmem[id].num_entries) & 1<name, S_IFREG | S_IRUGO, NULL, (void *)id, - &debug_fops); -#endif - return 0; -error_cant_remap: - kfree(pmem[id].bitmap); -err_no_mem_for_metadata: - misc_deregister(&pmem[id].dev); -err_cant_register_device: - return -1; -} - -static int pmem_probe(struct platform_device *pdev) -{ - struct android_pmem_platform_data *pdata; - - if (!pdev || !pdev->dev.platform_data) { - printk(KERN_ALERT "Unable to probe pmem!\n"); - return -1; - } - pdata = pdev->dev.platform_data; - return pmem_setup(pdata, NULL, NULL); -} - - -static int pmem_remove(struct platform_device *pdev) -{ - int id = pdev->id; - __free_page(pfn_to_page(pmem[id].garbage_pfn)); - misc_deregister(&pmem[id].dev); - return 0; -} - -static struct platform_driver pmem_driver = { - .probe = pmem_probe, - .remove = pmem_remove, - .driver = { .name = "android_pmem" } -}; - - -static int __init pmem_init(void) -{ - return platform_driver_register(&pmem_driver); -} - -static void __exit pmem_exit(void) -{ - platform_driver_unregister(&pmem_driver); -} - -module_init(pmem_init); -module_exit(pmem_exit); - -- cgit v1.2.3-55-g7522 From bd1eff9741af27378b241b347041c724bb28e857 Mon Sep 17 00:00:00 2001 From: Arve Hjønnevåg Date: Wed, 1 Feb 2012 15:29:13 -0800 Subject: Staging: android: binder: Fix crashes when sharing a binder file between processes Opening the binder driver and sharing the file returned with other processes (e.g. by calling fork) can crash the kernel. Prevent these crashes with the following changes: - Add a mutex to protect against two processes mmapping the same binder_proc. - After locking mmap_sem, check that the vma we want to access (still) points to the same mm_struct. - Use proc->tsk instead of current to get the files struct since this is where we get the rlimit from. Signed-off-by: Arve Hjønnevåg Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/binder.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 48cf27cdb51a..f0b7e6605ab5 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -38,6 +38,7 @@ static DEFINE_MUTEX(binder_lock); static DEFINE_MUTEX(binder_deferred_lock); +static DEFINE_MUTEX(binder_mmap_lock); static HLIST_HEAD(binder_procs); static HLIST_HEAD(binder_deferred_list); @@ -632,6 +633,11 @@ static int binder_update_page_range(struct binder_proc *proc, int allocate, if (mm) { down_write(&mm->mmap_sem); vma = proc->vma; + if (vma && mm != vma->vm_mm) { + pr_err("binder: %d: vma mm and task mm mismatch\n", + proc->pid); + vma = NULL; + } } if (allocate == 0) @@ -2802,6 +2808,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) } vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE; + mutex_lock(&binder_mmap_lock); if (proc->buffer) { ret = -EBUSY; failure_string = "already mapped"; @@ -2816,6 +2823,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) } proc->buffer = area->addr; proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer; + mutex_unlock(&binder_mmap_lock); #ifdef CONFIG_CPU_CACHE_VIPT if (cache_is_vipt_aliasing()) { @@ -2848,7 +2856,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) binder_insert_free_buffer(proc, buffer); proc->free_async_space = proc->buffer_size / 2; barrier(); - proc->files = get_files_struct(current); + proc->files = get_files_struct(proc->tsk); proc->vma = vma; /*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", @@ -2859,10 +2867,12 @@ err_alloc_small_buf_failed: kfree(proc->pages); proc->pages = NULL; err_alloc_pages_failed: + mutex_lock(&binder_mmap_lock); vfree(proc->buffer); proc->buffer = NULL; err_get_vm_area_failed: err_already_mapped: + mutex_unlock(&binder_mmap_lock); err_bad_arg: printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret); -- cgit v1.2.3-55-g7522 From a9d3c9e3c575ee09c905e07ae7cc1d52e2548d05 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 Feb 2012 19:04:02 -0800 Subject: staging: fix go7007-usb license Add MODULE_LICENSE() for this source module to fix build warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/media/go7007/go7007-usb.o see include/linux/module.h for more information Signed-off-by: Randy Dunlap Cc: Ross Cohen Signed-off-by: Greg Kroah-Hartman --- drivers/staging/media/go7007/go7007-usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c index 70e006b50f29..5443e25086e9 100644 --- a/drivers/staging/media/go7007/go7007-usb.c +++ b/drivers/staging/media/go7007/go7007-usb.c @@ -1279,3 +1279,4 @@ static struct usb_driver go7007_usb_driver = { }; module_usb_driver(go7007_usb_driver); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-55-g7522 From 2a4830110b90deb4ee99b1ab8c8ebb120f27c0c8 Mon Sep 17 00:00:00 2001 From: Seth Jennings Date: Fri, 30 Dec 2011 10:42:15 -0600 Subject: staging: zcache: fix serialization bug in zv stats In a multithreaded workload, the zv_curr_dist_counts and zv_cumul_dist_counts statistics are being corrupted because the increments and decrements in zv_create and zv_free are not atomic. This patch converts these statistics and their corresponding increments/decrements/reads to atomic operations. Signed-off-by: Seth Jennings Acked-by: Dan Magenheimer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/zcache-main.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index ce07087750a6..ef7c52bb1df9 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -654,8 +654,8 @@ static unsigned int zv_max_zsize = (PAGE_SIZE / 8) * 7; */ static unsigned int zv_max_mean_zsize = (PAGE_SIZE / 8) * 5; -static unsigned long zv_curr_dist_counts[NCHUNKS]; -static unsigned long zv_cumul_dist_counts[NCHUNKS]; +static atomic_t zv_curr_dist_counts[NCHUNKS]; +static atomic_t zv_cumul_dist_counts[NCHUNKS]; static struct zv_hdr *zv_create(struct xv_pool *xvpool, uint32_t pool_id, struct tmem_oid *oid, uint32_t index, @@ -674,8 +674,8 @@ static struct zv_hdr *zv_create(struct xv_pool *xvpool, uint32_t pool_id, &page, &offset, ZCACHE_GFP_MASK); if (unlikely(ret)) goto out; - zv_curr_dist_counts[chunks]++; - zv_cumul_dist_counts[chunks]++; + atomic_inc(&zv_curr_dist_counts[chunks]); + atomic_inc(&zv_cumul_dist_counts[chunks]); zv = kmap_atomic(page, KM_USER0) + offset; zv->index = index; zv->oid = *oid; @@ -697,7 +697,7 @@ static void zv_free(struct xv_pool *xvpool, struct zv_hdr *zv) ASSERT_SENTINEL(zv, ZVH); BUG_ON(chunks >= NCHUNKS); - zv_curr_dist_counts[chunks]--; + atomic_dec(&zv_curr_dist_counts[chunks]); size -= sizeof(*zv); BUG_ON(size == 0); INVERT_SENTINEL(zv, ZVH); @@ -737,7 +737,7 @@ static int zv_curr_dist_counts_show(char *buf) char *p = buf; for (i = 0; i < NCHUNKS; i++) { - n = zv_curr_dist_counts[i]; + n = atomic_read(&zv_curr_dist_counts[i]); p += sprintf(p, "%lu ", n); chunks += n; sum_total_chunks += i * n; @@ -753,7 +753,7 @@ static int zv_cumul_dist_counts_show(char *buf) char *p = buf; for (i = 0; i < NCHUNKS; i++) { - n = zv_cumul_dist_counts[i]; + n = atomic_read(&zv_cumul_dist_counts[i]); p += sprintf(p, "%lu ", n); chunks += n; sum_total_chunks += i * n; -- cgit v1.2.3-55-g7522 From e5d7965f88a3755b2d0c54768a17032ab3a72819 Mon Sep 17 00:00:00 2001 From: Arve Hjønnevåg Date: Fri, 13 Jan 2012 22:21:25 +0400 Subject: staging: android: lowmemorykiller: Don't wait more than one second for a process to die If a process forked and the child process was killed by the lowmemorykiller, the lowmemory killer would be disabled until the parent process reaped the child or it died itself. Signed-off-by: Arve Hjønnevåg Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/lowmemorykiller.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c index 2d8d2b796101..efc7dc1f4831 100644 --- a/drivers/staging/android/lowmemorykiller.c +++ b/drivers/staging/android/lowmemorykiller.c @@ -54,6 +54,7 @@ static size_t lowmem_minfree[6] = { static int lowmem_minfree_size = 4; static struct task_struct *lowmem_deathpending; +static unsigned long lowmem_deathpending_timeout; #define lowmem_print(level, x...) \ do { \ @@ -103,7 +104,8 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) * Note: Currently you need CONFIG_PROFILING * for this to work correctly. */ - if (lowmem_deathpending) + if (lowmem_deathpending && + time_before_eq(jiffies, lowmem_deathpending_timeout)) return 0; if (lowmem_adj_size < array_size) @@ -178,6 +180,7 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) */ #ifdef CONFIG_PROFILING lowmem_deathpending = selected; + lowmem_deathpending_timeout = jiffies + HZ; task_handoff_register(&task_nb); #endif force_sig(SIGKILL, selected); -- cgit v1.2.3-55-g7522 From 5a63177a6967698df58c6c93d0db3a3586e0b028 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Mon, 30 Jan 2012 19:20:17 -0600 Subject: staging: tidspbridge: fix bridge_open memory leaks There are two members of pr_ctxt allocated during bridge_open that are never freed resulting in memory leaks, these are stream_id and node_id, they are now freed on release of the handle (bridge_release) right before freeing pr_ctxt. Error path for bridge_open was also fixed since the same variables could result in memory leaking due to missing handling of failure scenarios. While at it, the indentation changes were introduced to avoid interleaved goto statements inside big if blocks. Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/rmgr/drv_interface.c | 55 ++++++++++++++---------- 1 file changed, 32 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c index 76cfc6edecd9..8bac511c627f 100644 --- a/drivers/staging/tidspbridge/rmgr/drv_interface.c +++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c @@ -500,35 +500,42 @@ static int bridge_open(struct inode *ip, struct file *filp) } #endif pr_ctxt = kzalloc(sizeof(struct process_context), GFP_KERNEL); - if (pr_ctxt) { - pr_ctxt->res_state = PROC_RES_ALLOCATED; - spin_lock_init(&pr_ctxt->dmm_map_lock); - INIT_LIST_HEAD(&pr_ctxt->dmm_map_list); - spin_lock_init(&pr_ctxt->dmm_rsv_lock); - INIT_LIST_HEAD(&pr_ctxt->dmm_rsv_list); - - pr_ctxt->node_id = kzalloc(sizeof(struct idr), GFP_KERNEL); - if (pr_ctxt->node_id) { - idr_init(pr_ctxt->node_id); - } else { - status = -ENOMEM; - goto err; - } + if (!pr_ctxt) + return -ENOMEM; + + pr_ctxt->res_state = PROC_RES_ALLOCATED; + spin_lock_init(&pr_ctxt->dmm_map_lock); + INIT_LIST_HEAD(&pr_ctxt->dmm_map_list); + spin_lock_init(&pr_ctxt->dmm_rsv_lock); + INIT_LIST_HEAD(&pr_ctxt->dmm_rsv_list); - pr_ctxt->stream_id = kzalloc(sizeof(struct idr), GFP_KERNEL); - if (pr_ctxt->stream_id) - idr_init(pr_ctxt->stream_id); - else - status = -ENOMEM; - } else { + pr_ctxt->node_id = kzalloc(sizeof(struct idr), GFP_KERNEL); + if (!pr_ctxt->node_id) { status = -ENOMEM; + goto err1; } -err: + + idr_init(pr_ctxt->node_id); + + pr_ctxt->stream_id = kzalloc(sizeof(struct idr), GFP_KERNEL); + if (!pr_ctxt->stream_id) { + status = -ENOMEM; + goto err2; + } + + idr_init(pr_ctxt->stream_id); + filp->private_data = pr_ctxt; + #ifdef CONFIG_TIDSPBRIDGE_RECOVERY - if (!status) - atomic_inc(&bridge_cref); + atomic_inc(&bridge_cref); #endif + return 0; + +err2: + kfree(pr_ctxt->node_id); +err1: + kfree(pr_ctxt); return status; } @@ -550,6 +557,8 @@ static int bridge_release(struct inode *ip, struct file *filp) flush_signals(current); drv_remove_all_resources(pr_ctxt); proc_detach(pr_ctxt); + kfree(pr_ctxt->node_id); + kfree(pr_ctxt->stream_id); kfree(pr_ctxt); filp->private_data = NULL; -- cgit v1.2.3-55-g7522 From 44c5435064b5e6182167b40a7f259969dbcaf1b8 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Mon, 30 Jan 2012 19:20:18 -0600 Subject: staging: tidspbridge: fix incorrect free to drv_datap This structure is still used after it has been freed, since it is being allocated in probe, calls to free it have been moved to module's remove routine. This should fix the follwoing messages when attempting to remove the module: drv_get_first_dev_extension: Failed to retrieve the object handle drv_get_first_dev_extension: Failed to retrieve the object handle drv_destroy: Failed to store DRV object mgr_destroy: Failed to store MGR object Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/tiomap3430.c | 2 -- drivers/staging/tidspbridge/rmgr/drv_interface.c | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index e1c4492a7105..dde559d06c43 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -1046,8 +1046,6 @@ static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt) /* Free the driver's device context: */ kfree(drv_datap->base_img); - kfree(drv_datap); - dev_set_drvdata(bridge, NULL); kfree((void *)dev_ctxt); return status; } diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c index 8bac511c627f..385740bad0de 100644 --- a/drivers/staging/tidspbridge/rmgr/drv_interface.c +++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c @@ -410,6 +410,9 @@ static int __devexit omap34_xx_bridge_remove(struct platform_device *pdev) DBC_ASSERT(ret == true); } + kfree(drv_datap); + dev_set_drvdata(bridge, NULL); + func_cont: mem_ext_phys_pool_release(); -- cgit v1.2.3-55-g7522 From 4c0029f01f4009d6ab149230026c9716bde96283 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 3 Feb 2012 16:05:13 -0600 Subject: staging: r8712u: Fix problem when CONFIG_R8712_AP is set When this driver was upgraded to the vendor 20100831 version in commit 93c55dda092c7 et al,, one listhead initialization was missed. This broke complete operation of the driver whenever AP mode was enabled. This patch fixes https://bugs.archlinux.org/task/27996. Signed-off-by: Larry Finger Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/rtl871x_sta_mgt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/rtl8712/rtl871x_sta_mgt.c b/drivers/staging/rtl8712/rtl871x_sta_mgt.c index 64f569618839..81bde803c59f 100644 --- a/drivers/staging/rtl8712/rtl871x_sta_mgt.c +++ b/drivers/staging/rtl8712/rtl871x_sta_mgt.c @@ -43,6 +43,7 @@ static void _init_stainfo(struct sta_info *psta) _r8712_init_sta_xmit_priv(&psta->sta_xmitpriv); _r8712_init_sta_recv_priv(&psta->sta_recvpriv); #ifdef CONFIG_R8712_AP + _init_listhead(&psta->asoc_list); _init_listhead(&psta->auth_list); #endif } -- cgit v1.2.3-55-g7522 From 737912e11bf5bd4874acc771d8511a6eab891fc5 Mon Sep 17 00:00:00 2001 From: Bart Westgeest Date: Wed, 25 Jan 2012 13:46:32 -0500 Subject: staging: usbip: fix to prevent potentially using uninitialized spinlock The stub_probe function can be called as soon as the stub_driver is registered. This can lead to the busid_table_lock being used before it is initialized. Moved calling the init_busid_table function (which initalizes this spinlock) to be called earlier in the init function to prevent this from happening. Signed-off-by: Bart Westgeest Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/stub_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/stub_main.c b/drivers/staging/usbip/stub_main.c index 2d6317850064..705a9e530a19 100644 --- a/drivers/staging/usbip/stub_main.c +++ b/drivers/staging/usbip/stub_main.c @@ -246,8 +246,9 @@ static int __init usbip_host_init(void) { int ret; - stub_priv_cache = KMEM_CACHE(stub_priv, SLAB_HWCACHE_ALIGN); + init_busid_table(); + stub_priv_cache = KMEM_CACHE(stub_priv, SLAB_HWCACHE_ALIGN); if (!stub_priv_cache) { pr_err("kmem_cache_create failed\n"); return -ENOMEM; @@ -266,7 +267,6 @@ static int __init usbip_host_init(void) goto err_create_file; } - init_busid_table(); pr_info(DRIVER_DESC " v" USBIP_VERSION "\n"); return ret; -- cgit v1.2.3-55-g7522 From 8c213fa59199f9673d66970d6940fa093186642f Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 5 Feb 2012 21:12:26 -0600 Subject: staging: r8712u: Use asynchronous firmware loading In https://bugs.archlinux.org/task/27996, failure of driver r8712u is reported, with a timeout during module loading due to synchronous loading of the firmware. The code now uses request_firmware_nowait(). Signed-off-by: Larry Finger Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/drv_types.h | 7 ++++ drivers/staging/rtl8712/hal_init.c | 62 ++++++++++++++++++++++++----------- drivers/staging/rtl8712/os_intfs.c | 14 ++++++-- drivers/staging/rtl8712/rtl8712_hal.h | 1 + drivers/staging/rtl8712/usb_intf.c | 9 +++-- 5 files changed, 68 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8712/drv_types.h b/drivers/staging/rtl8712/drv_types.h index 9b5d771e650c..ed85b4415207 100644 --- a/drivers/staging/rtl8712/drv_types.h +++ b/drivers/staging/rtl8712/drv_types.h @@ -37,6 +37,8 @@ struct _adapter; #include "wlan_bssdef.h" #include "rtl8712_spec.h" #include "rtl8712_hal.h" +#include +#include enum _NIC_VERSION { RTL8711_NIC, @@ -168,6 +170,7 @@ struct _adapter { s32 bSurpriseRemoved; u32 IsrContent; u32 ImrContent; + bool fw_found; u8 EepromAddressSize; u8 hw_init_completed; struct task_struct *cmdThread; @@ -184,6 +187,10 @@ struct _adapter { _workitem wkFilterRxFF0; u8 blnEnableRxFF0Filter; spinlock_t lockRxFF0Filter; + const struct firmware *fw; + struct usb_interface *pusb_intf; + struct mutex mutex_start; + struct completion rtl8712_fw_ready; }; static inline u8 *myid(struct eeprom_priv *peepriv) diff --git a/drivers/staging/rtl8712/hal_init.c b/drivers/staging/rtl8712/hal_init.c index d0029aa4cd3c..cc893c0f5ad3 100644 --- a/drivers/staging/rtl8712/hal_init.c +++ b/drivers/staging/rtl8712/hal_init.c @@ -42,29 +42,56 @@ #define FWBUFF_ALIGN_SZ 512 #define MAX_DUMP_FWSZ 49152 /*default = 49152 (48k)*/ -static u32 rtl871x_open_fw(struct _adapter *padapter, void **pphfwfile_hdl, - const u8 **ppmappedfw) +static void rtl871x_load_fw_cb(const struct firmware *firmware, void *context) { + struct _adapter *padapter = context; + + complete(&padapter->rtl8712_fw_ready); + if (!firmware) { + struct usb_device *udev = padapter->dvobjpriv.pusbdev; + struct usb_interface *pusb_intf = padapter->pusb_intf; + printk(KERN_ERR "r8712u: Firmware request failed\n"); + padapter->fw_found = false; + usb_put_dev(udev); + usb_set_intfdata(pusb_intf, NULL); + return; + } + padapter->fw = firmware; + padapter->fw_found = true; + /* firmware available - start netdev */ + register_netdev(padapter->pnetdev); +} + +static const char firmware_file[] = "rtlwifi/rtl8712u.bin"; + +int rtl871x_load_fw(struct _adapter *padapter) +{ + struct device *dev = &padapter->dvobjpriv.pusbdev->dev; int rc; - const char firmware_file[] = "rtlwifi/rtl8712u.bin"; - const struct firmware **praw = (const struct firmware **) - (pphfwfile_hdl); - struct dvobj_priv *pdvobjpriv = (struct dvobj_priv *) - (&padapter->dvobjpriv); - struct usb_device *pusbdev = pdvobjpriv->pusbdev; + init_completion(&padapter->rtl8712_fw_ready); printk(KERN_INFO "r8712u: Loading firmware from \"%s\"\n", firmware_file); - rc = request_firmware(praw, firmware_file, &pusbdev->dev); - if (rc < 0) { - printk(KERN_ERR "r8712u: Unable to load firmware\n"); - printk(KERN_ERR "r8712u: Install latest linux-firmware\n"); + rc = request_firmware_nowait(THIS_MODULE, 1, firmware_file, dev, + GFP_KERNEL, padapter, rtl871x_load_fw_cb); + if (rc) + printk(KERN_ERR "r8712u: Firmware request error %d\n", rc); + return rc; +} +MODULE_FIRMWARE("rtlwifi/rtl8712u.bin"); + +static u32 rtl871x_open_fw(struct _adapter *padapter, const u8 **ppmappedfw) +{ + const struct firmware **praw = &padapter->fw; + + if (padapter->fw->size > 200000) { + printk(KERN_ERR "r8172u: Badfw->size of %d\n", + (int)padapter->fw->size); return 0; } *ppmappedfw = (u8 *)((*praw)->data); return (*praw)->size; } -MODULE_FIRMWARE("rtlwifi/rtl8712u.bin"); static void fill_fwpriv(struct _adapter *padapter, struct fw_priv *pfwpriv) { @@ -142,18 +169,17 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) uint dump_imem_sz, imem_sz, dump_emem_sz, emem_sz; /* max = 49152; */ struct fw_hdr fwhdr; u32 ulfilelength; /* FW file size */ - void *phfwfile_hdl = NULL; const u8 *pmappedfw = NULL; u8 *ptmpchar = NULL, *ppayload, *ptr; struct tx_desc *ptx_desc; u32 txdscp_sz = sizeof(struct tx_desc); u8 ret = _FAIL; - ulfilelength = rtl871x_open_fw(padapter, &phfwfile_hdl, &pmappedfw); + ulfilelength = rtl871x_open_fw(padapter, &pmappedfw); if (pmappedfw && (ulfilelength > 0)) { update_fwhdr(&fwhdr, pmappedfw); if (chk_fwhdr(&fwhdr, ulfilelength) == _FAIL) - goto firmware_rel; + return ret; fill_fwpriv(padapter, &fwhdr.fwpriv); /* firmware check ok */ maxlen = (fwhdr.img_IMEM_size > fwhdr.img_SRAM_size) ? @@ -161,7 +187,7 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) maxlen += txdscp_sz; ptmpchar = _malloc(maxlen + FWBUFF_ALIGN_SZ); if (ptmpchar == NULL) - goto firmware_rel; + return ret; ptx_desc = (struct tx_desc *)(ptmpchar + FWBUFF_ALIGN_SZ - ((addr_t)(ptmpchar) & (FWBUFF_ALIGN_SZ - 1))); @@ -297,8 +323,6 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) exit_fail: kfree(ptmpchar); -firmware_rel: - release_firmware((struct firmware *)phfwfile_hdl); return ret; } diff --git a/drivers/staging/rtl8712/os_intfs.c b/drivers/staging/rtl8712/os_intfs.c index 9a75c6dbe505..98a3d684f9b2 100644 --- a/drivers/staging/rtl8712/os_intfs.c +++ b/drivers/staging/rtl8712/os_intfs.c @@ -31,6 +31,7 @@ #include #include #include +#include #include "osdep_service.h" #include "drv_types.h" #include "xmit_osdep.h" @@ -264,12 +265,12 @@ static void start_drv_timers(struct _adapter *padapter) void r8712_stop_drv_timers(struct _adapter *padapter) { _cancel_timer_ex(&padapter->mlmepriv.assoc_timer); - _cancel_timer_ex(&padapter->mlmepriv.sitesurveyctrl. - sitesurvey_ctrl_timer); _cancel_timer_ex(&padapter->securitypriv.tkip_timer); _cancel_timer_ex(&padapter->mlmepriv.scan_to_timer); _cancel_timer_ex(&padapter->mlmepriv.dhcp_timer); _cancel_timer_ex(&padapter->mlmepriv.wdg_timer); + _cancel_timer_ex(&padapter->mlmepriv.sitesurveyctrl. + sitesurvey_ctrl_timer); } static u8 init_default_value(struct _adapter *padapter) @@ -347,7 +348,8 @@ u8 r8712_free_drv_sw(struct _adapter *padapter) r8712_free_mlme_priv(&padapter->mlmepriv); r8712_free_io_queue(padapter); _free_xmit_priv(&padapter->xmitpriv); - _r8712_free_sta_priv(&padapter->stapriv); + if (padapter->fw_found) + _r8712_free_sta_priv(&padapter->stapriv); _r8712_free_recv_priv(&padapter->recvpriv); mp871xdeinit(padapter); if (pnetdev) @@ -388,6 +390,7 @@ static int netdev_open(struct net_device *pnetdev) { struct _adapter *padapter = (struct _adapter *)netdev_priv(pnetdev); + mutex_lock(&padapter->mutex_start); if (padapter->bup == false) { padapter->bDriverStopped = false; padapter->bSurpriseRemoved = false; @@ -435,11 +438,13 @@ static int netdev_open(struct net_device *pnetdev) /* start driver mlme relation timer */ start_drv_timers(padapter); padapter->ledpriv.LedControlHandler(padapter, LED_CTL_NO_LINK); + mutex_unlock(&padapter->mutex_start); return 0; netdev_open_error: padapter->bup = false; netif_carrier_off(pnetdev); netif_stop_queue(pnetdev); + mutex_unlock(&padapter->mutex_start); return -1; } @@ -473,6 +478,9 @@ static int netdev_close(struct net_device *pnetdev) r8712_free_network_queue(padapter); /* The interface is no longer Up: */ padapter->bup = false; + release_firmware(padapter->fw); + /* never exit with a firmware callback pending */ + wait_for_completion(&padapter->rtl8712_fw_ready); return 0; } diff --git a/drivers/staging/rtl8712/rtl8712_hal.h b/drivers/staging/rtl8712/rtl8712_hal.h index 665e71838172..d19865a5a50c 100644 --- a/drivers/staging/rtl8712/rtl8712_hal.h +++ b/drivers/staging/rtl8712/rtl8712_hal.h @@ -145,5 +145,6 @@ struct hal_priv { }; uint rtl8712_hal_init(struct _adapter *padapter); +int rtl871x_load_fw(struct _adapter *padapter); #endif diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index 8de0c80ebf8a..9bade184883b 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -390,6 +390,7 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf, pdvobjpriv = &padapter->dvobjpriv; pdvobjpriv->padapter = padapter; padapter->dvobjpriv.pusbdev = udev; + padapter->pusb_intf = pusb_intf; usb_set_intfdata(pusb_intf, pnetdev); SET_NETDEV_DEV(pnetdev, &pusb_intf->dev); /* step 2. */ @@ -596,10 +597,11 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf, "%pM\n", mac); memcpy(pnetdev->dev_addr, mac, ETH_ALEN); } - /* step 6. Tell the network stack we exist */ - if (register_netdev(pnetdev) != 0) + /* step 6. Load the firmware asynchronously */ + if (rtl871x_load_fw(padapter)) goto error; spin_lock_init(&padapter->lockRxFF0Filter); + mutex_init(&padapter->mutex_start); return 0; error: usb_put_dev(udev); @@ -630,7 +632,8 @@ static void r871xu_dev_remove(struct usb_interface *pusb_intf) flush_scheduled_work(); udelay(1); /*Stop driver mlme relation timer */ - r8712_stop_drv_timers(padapter); + if (padapter->fw_found) + r8712_stop_drv_timers(padapter); r871x_dev_unload(padapter); r8712_free_drv_sw(padapter); } -- cgit v1.2.3-55-g7522 From 203209ef77e4d5f0ee729557b09770bce0c2d251 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 7 Feb 2012 09:13:27 +0400 Subject: staging: android/ram_console: Don't build on arches w/o ioremap This patch fixes UML build: CC drivers/staging/android/ram_console.o drivers/staging/android/ram_console.c: In function 'ram_console_driver_probe': drivers/staging/android/ram_console.c:358:2: error: implicit declaration of function 'ioremap' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [drivers/staging/android/ram_console.o] Error 1 Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 94cb2ac9624e..fef3580ce8de 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -27,6 +27,7 @@ config ANDROID_LOGGER config ANDROID_RAM_CONSOLE bool "Android RAM buffer console" + depends on !S390 && !UML default n config ANDROID_RAM_CONSOLE_ENABLE_VERBOSE -- cgit v1.2.3-55-g7522 From c8a64268d187b2ace478d2147ce5c79658aca2d2 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 8 Feb 2012 09:05:42 -0500 Subject: m32r: relocate drivers back out of 8250 dir Commit 9bef3d4197379a995fa80f81950bbbf8d32e9e8b "serial: group all the 8250 related code together" inadvertently swept up the m32r driver in the move, because it had comments mentioning 8250 registers within it. However these are only there by nature of the driver being based off the 8250 source code -- the hardware itself does not actually have any relation to the original 8250 style UARTs. Reported-by: Jiri Slaby Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/m32r_sio.c | 1191 -------------------------------- drivers/tty/serial/8250/m32r_sio.h | 48 -- drivers/tty/serial/8250/m32r_sio_reg.h | 152 ---- drivers/tty/serial/m32r_sio.c | 1191 ++++++++++++++++++++++++++++++++ drivers/tty/serial/m32r_sio.h | 48 ++ drivers/tty/serial/m32r_sio_reg.h | 152 ++++ 6 files changed, 1391 insertions(+), 1391 deletions(-) delete mode 100644 drivers/tty/serial/8250/m32r_sio.c delete mode 100644 drivers/tty/serial/8250/m32r_sio.h delete mode 100644 drivers/tty/serial/8250/m32r_sio_reg.h create mode 100644 drivers/tty/serial/m32r_sio.c create mode 100644 drivers/tty/serial/m32r_sio.h create mode 100644 drivers/tty/serial/m32r_sio_reg.h (limited to 'drivers') diff --git a/drivers/tty/serial/8250/m32r_sio.c b/drivers/tty/serial/8250/m32r_sio.c deleted file mode 100644 index 94a6792bf97b..000000000000 --- a/drivers/tty/serial/8250/m32r_sio.c +++ /dev/null @@ -1,1191 +0,0 @@ -/* - * m32r_sio.c - * - * Driver for M32R serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/8250.c. - * - * Copyright (C) 2001 Russell King. - * Copyright (C) 2004 Hirokazu Takata - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* - * A note about mapbase / membase - * - * mapbase is the physical address of the IO port. Currently, we don't - * support this very well, and it may well be dropped from this driver - * in future. As such, mapbase should be NULL. - * - * membase is an 'ioremapped' cookie. This is compatible with the old - * serial.c driver, and is currently the preferred form. - */ - -#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define PORT_M32R_BASE PORT_M32R_SIO -#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) -#define BAUD_RATE 115200 - -#include -#include "m32r_sio.h" -#include "m32r_sio_reg.h" - -/* - * Debugging. - */ -#if 0 -#define DEBUG_AUTOCONF(fmt...) printk(fmt) -#else -#define DEBUG_AUTOCONF(fmt...) do { } while (0) -#endif - -#if 0 -#define DEBUG_INTR(fmt...) printk(fmt) -#else -#define DEBUG_INTR(fmt...) do { } while (0) -#endif - -#define PASS_LIMIT 256 - -/* - * We default to IRQ0 for the "no irq" hack. Some - * machine types want others as well - they're free - * to redefine this in their header file. - */ -#define is_real_interrupt(irq) ((irq) != 0) - -#define BASE_BAUD 115200 - -/* Standard COM flags */ -#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) - -/* - * SERIAL_PORT_DFNS tells us about built-in ports that have no - * standard enumeration mechanism. Platforms that can find all - * serial ports via mechanisms like ACPI or PCI need not supply it. - */ -#if defined(CONFIG_PLAT_USRV) - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ - -#else /* !CONFIG_PLAT_USRV */ - -#if defined(CONFIG_SERIAL_M32R_PLDSIO) -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ - STD_COM_FLAGS }, /* ttyS0 */ -#else -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ - STD_COM_FLAGS }, /* ttyS0 */ -#endif - -#endif /* !CONFIG_PLAT_USRV */ - -static struct old_serial_port old_serial_port[] = { - SERIAL_PORT_DFNS -}; - -#define UART_NR ARRAY_SIZE(old_serial_port) - -struct uart_sio_port { - struct uart_port port; - struct timer_list timer; /* "no irq" timer */ - struct list_head list; /* ports on this IRQ */ - unsigned short rev; - unsigned char acr; - unsigned char ier; - unsigned char lcr; - unsigned char mcr_mask; /* mask of user bits */ - unsigned char mcr_force; /* mask of forced bits */ - unsigned char lsr_break_flag; - - /* - * We provide a per-port pm hook. - */ - void (*pm)(struct uart_port *port, - unsigned int state, unsigned int old); -}; - -struct irq_info { - spinlock_t lock; - struct list_head *head; -}; - -static struct irq_info irq_lists[NR_IRQS]; - -/* - * Here we define the default xmit fifo size used for each type of UART. - */ -static const struct serial_uart_config uart_config[] = { - [PORT_UNKNOWN] = { - .name = "unknown", - .dfl_xmit_fifo_size = 1, - .flags = 0, - }, - [PORT_INDEX(PORT_M32R_SIO)] = { - .name = "M32RSIO", - .dfl_xmit_fifo_size = 1, - .flags = 0, - }, -}; - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - -#define __sio_in(x) inw((unsigned long)(x)) -#define __sio_out(v,x) outw((v),(unsigned long)(x)) - -static inline void sio_set_baud_rate(unsigned long baud) -{ - unsigned short sbaud; - sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; - __sio_out(sbaud, PLD_ESIO0BAUR); -} - -static void sio_reset(void) -{ - unsigned short tmp; - - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0CR); - sio_set_baud_rate(BAUD_RATE); - __sio_out(0x0300, PLD_ESIO0CR); - __sio_out(0x0003, PLD_ESIO0CR); -} - -static void sio_init(void) -{ - unsigned short tmp; - - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0CR); - __sio_out(0x0300, PLD_ESIO0CR); - __sio_out(0x0003, PLD_ESIO0CR); -} - -static void sio_error(int *status) -{ - printk("SIO0 error[%04x]\n", *status); - do { - sio_init(); - } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); -} - -#else /* not CONFIG_SERIAL_M32R_PLDSIO */ - -#define __sio_in(x) inl(x) -#define __sio_out(v,x) outl((v),(x)) - -static inline void sio_set_baud_rate(unsigned long baud) -{ - unsigned long i, j; - - i = boot_cpu_data.bus_clock / (baud * 16); - j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; - i -= 1; - j = (j + 1) >> 1; - - __sio_out(i, M32R_SIO0_BAUR_PORTL); - __sio_out(j, M32R_SIO0_RBAUR_PORTL); -} - -static void sio_reset(void) -{ - __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ - __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ - __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ - sio_set_baud_rate(BAUD_RATE); - __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); - __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ -} - -static void sio_init(void) -{ - unsigned int tmp; - - tmp = __sio_in(M32R_SIO0_RXB_PORTL); - tmp = __sio_in(M32R_SIO0_RXB_PORTL); - tmp = __sio_in(M32R_SIO0_STS_PORTL); - __sio_out(0x00000003, M32R_SIO0_CR_PORTL); -} - -static void sio_error(int *status) -{ - printk("SIO0 error[%04x]\n", *status); - do { - sio_init(); - } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); -} - -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - -static unsigned int sio_in(struct uart_sio_port *up, int offset) -{ - return __sio_in(up->port.iobase + offset); -} - -static void sio_out(struct uart_sio_port *up, int offset, int value) -{ - __sio_out(value, up->port.iobase + offset); -} - -static unsigned int serial_in(struct uart_sio_port *up, int offset) -{ - if (!offset) - return 0; - - return __sio_in(offset); -} - -static void serial_out(struct uart_sio_port *up, int offset, int value) -{ - if (!offset) - return; - - __sio_out(value, offset); -} - -static void m32r_sio_stop_tx(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void m32r_sio_start_tx(struct uart_port *port) -{ -#ifdef CONFIG_SERIAL_M32R_PLDSIO - struct uart_sio_port *up = (struct uart_sio_port *)port; - struct circ_buf *xmit = &up->port.state->xmit; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - } - while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); -#else - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -#endif -} - -static void m32r_sio_stop_rx(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static void m32r_sio_enable_ms(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void receive_chars(struct uart_sio_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch; - unsigned char flag; - int max_count = 256; - - do { - ch = sio_in(up, SIORXB); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - /* - * For statistics only - */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ingored. - */ - *status &= up->port.read_status_mask; - - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } - - if (*status & UART_LSR_BI) { - DEBUG_INTR("handling break...."); - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - if ((*status & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - - if (*status & UART_LSR_OE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - tty_flip_buffer_push(tty); -} - -static void transmit_chars(struct uart_sio_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { -#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ - serial_out(up, UART_TX, up->port.x_char); -#endif - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - m32r_sio_stop_tx(&up->port); - return; - } - - count = up->port.fifosize; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); - - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - DEBUG_INTR("THRE..."); - - if (uart_circ_empty(xmit)) - m32r_sio_stop_tx(&up->port); -} - -/* - * This handles the interrupt from one port. - */ -static inline void m32r_sio_handle_port(struct uart_sio_port *up, - unsigned int status) -{ - DEBUG_INTR("status = %x...", status); - - if (status & 0x04) - receive_chars(up, &status); - if (status & 0x01) - transmit_chars(up); -} - -/* - * This is the serial driver's interrupt routine. - * - * Arjan thinks the old way was overly complex, so it got simplified. - * Alan disagrees, saying that need the complexity to handle the weird - * nature of ISA shared interrupts. (This is a special exception.) - * - * In order to handle ISA shared interrupts properly, we need to check - * that all ports have been serviced, and therefore the ISA interrupt - * line has been de-asserted. - * - * This means we need to loop through all ports. checking that they - * don't have an interrupt pending. - */ -static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) -{ - struct irq_info *i = dev_id; - struct list_head *l, *end = NULL; - int pass_counter = 0; - - DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); - -#ifdef CONFIG_SERIAL_M32R_PLDSIO -// if (irq == PLD_IRQ_SIO0_SND) -// irq = PLD_IRQ_SIO0_RCV; -#else - if (irq == M32R_IRQ_SIO0_S) - irq = M32R_IRQ_SIO0_R; -#endif - - spin_lock(&i->lock); - - l = i->head; - do { - struct uart_sio_port *up; - unsigned int sts; - - up = list_entry(l, struct uart_sio_port, list); - - sts = sio_in(up, SIOSTS); - if (sts & 0x5) { - spin_lock(&up->port.lock); - m32r_sio_handle_port(up, sts); - spin_unlock(&up->port.lock); - - end = NULL; - } else if (end == NULL) - end = l; - - l = l->next; - - if (l == i->head && pass_counter++ > PASS_LIMIT) { - if (sts & 0xe0) - sio_error(&sts); - break; - } - } while (l != end); - - spin_unlock(&i->lock); - - DEBUG_INTR("end.\n"); - - return IRQ_HANDLED; -} - -/* - * To support ISA shared interrupts, we need to have one interrupt - * handler that ensures that the IRQ line has been deasserted - * before returning. Failing to do this will result in the IRQ - * line being stuck active, and, since ISA irqs are edge triggered, - * no more IRQs will be seen. - */ -static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) -{ - spin_lock_irq(&i->lock); - - if (!list_empty(i->head)) { - if (i->head == &up->list) - i->head = i->head->next; - list_del(&up->list); - } else { - BUG_ON(i->head != &up->list); - i->head = NULL; - } - - spin_unlock_irq(&i->lock); -} - -static int serial_link_irq_chain(struct uart_sio_port *up) -{ - struct irq_info *i = irq_lists + up->port.irq; - int ret, irq_flags = 0; - - spin_lock_irq(&i->lock); - - if (i->head) { - list_add(&up->list, i->head); - spin_unlock_irq(&i->lock); - - ret = 0; - } else { - INIT_LIST_HEAD(&up->list); - i->head = &up->list; - spin_unlock_irq(&i->lock); - - ret = request_irq(up->port.irq, m32r_sio_interrupt, - irq_flags, "SIO0-RX", i); - ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, - irq_flags, "SIO0-TX", i); - if (ret < 0) - serial_do_unlink(i, up); - } - - return ret; -} - -static void serial_unlink_irq_chain(struct uart_sio_port *up) -{ - struct irq_info *i = irq_lists + up->port.irq; - - BUG_ON(i->head == NULL); - - if (list_empty(i->head)) { - free_irq(up->port.irq, i); - free_irq(up->port.irq + 1, i); - } - - serial_do_unlink(i, up); -} - -/* - * This function is used to handle ports that do not have an interrupt. - */ -static void m32r_sio_timeout(unsigned long data) -{ - struct uart_sio_port *up = (struct uart_sio_port *)data; - unsigned int timeout; - unsigned int sts; - - sts = sio_in(up, SIOSTS); - if (sts & 0x5) { - spin_lock(&up->port.lock); - m32r_sio_handle_port(up, sts); - spin_unlock(&up->port.lock); - } - - timeout = up->port.timeout; - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - mod_timer(&up->timer, jiffies + timeout); -} - -static unsigned int m32r_sio_tx_empty(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int m32r_sio_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - -} - -static void m32r_sio_break_ctl(struct uart_port *port, int break_state) -{ - -} - -static int m32r_sio_startup(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - int retval; - - sio_init(); - - /* - * If the "interrupt" for this port doesn't correspond with any - * hardware interrupt, we use a timer-based system. The original - * driver used to do this with IRQ0. - */ - if (!is_real_interrupt(up->port.irq)) { - unsigned int timeout = up->port.timeout; - - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + timeout); - } else { - retval = serial_link_irq_chain(up); - if (retval) - return retval; - } - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - * - M32R_SIO: 0x0c - * - M32R_PLDSIO: 0x04 - */ - up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - sio_out(up, SIOTRCR, up->ier); - - /* - * And clear the interrupt registers again for luck. - */ - sio_reset(); - - return 0; -} - -static void m32r_sio_shutdown(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - /* - * Disable interrupts from this port - */ - up->ier = 0; - sio_out(up, SIOTRCR, 0); - - /* - * Disable break condition and FIFOs - */ - - sio_init(); - - if (!is_real_interrupt(up->port.irq)) - del_timer_sync(&up->timer); - else - serial_unlink_irq_chain(up); -} - -static unsigned int m32r_sio_get_divisor(struct uart_port *port, - unsigned int baud) -{ - return uart_get_divisor(port, baud); -} - -static void m32r_sio_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned char cval = 0; - unsigned long flags; - unsigned int baud, quot; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (termios->c_cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* - * Ask the core to calculate the divisor for us. - */ -#ifdef CONFIG_SERIAL_M32R_PLDSIO - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); -#else - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); -#endif - quot = m32r_sio_get_divisor(port, baud); - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - sio_set_baud_rate(baud); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - up->lcr = cval; /* Save LCR */ - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void m32r_sio_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (up->pm) - up->pm(port, state, oldstate); -} - -/* - * Resource handling. This is complicated by the fact that resources - * depend on the port type. Maybe we should be claiming the standard - * 8250 ports, and then trying to get other resources as necessary? - */ -static int -m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) -{ - unsigned int size = 8 << up->port.regshift; -#ifndef CONFIG_SERIAL_M32R_PLDSIO - unsigned long start; -#endif - int ret = 0; - - switch (up->port.iotype) { - case UPIO_MEM: - if (up->port.mapbase) { -#ifdef CONFIG_SERIAL_M32R_PLDSIO - *res = request_mem_region(up->port.mapbase, size, "serial"); -#else - start = up->port.mapbase; - *res = request_mem_region(start, size, "serial"); -#endif - if (!*res) - ret = -EBUSY; - } - break; - - case UPIO_PORT: - *res = request_region(up->port.iobase, size, "serial"); - if (!*res) - ret = -EBUSY; - break; - } - return ret; -} - -static void m32r_sio_release_port(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned long start, offset = 0, size = 0; - - size <<= up->port.regshift; - - switch (up->port.iotype) { - case UPIO_MEM: - if (up->port.mapbase) { - /* - * Unmap the area. - */ - iounmap(up->port.membase); - up->port.membase = NULL; - - start = up->port.mapbase; - - if (size) - release_mem_region(start + offset, size); - release_mem_region(start, 8 << up->port.regshift); - } - break; - - case UPIO_PORT: - start = up->port.iobase; - - if (size) - release_region(start + offset, size); - release_region(start + offset, 8 << up->port.regshift); - break; - - default: - break; - } -} - -static int m32r_sio_request_port(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - struct resource *res = NULL; - int ret = 0; - - ret = m32r_sio_request_std_resource(up, &res); - - /* - * If we have a mapbase, then request that as well. - */ - if (ret == 0 && up->port.flags & UPF_IOREMAP) { - int size = resource_size(res); - - up->port.membase = ioremap(up->port.mapbase, size); - if (!up->port.membase) - ret = -ENOMEM; - } - - if (ret < 0) { - if (res) - release_resource(res); - } - - return ret; -} - -static void m32r_sio_config_port(struct uart_port *port, int unused) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); - up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int -m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (ser->irq >= nr_irqs || ser->irq < 0 || - ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || - ser->type >= ARRAY_SIZE(uart_config)) - return -EINVAL; - return 0; -} - -static const char * -m32r_sio_type(struct uart_port *port) -{ - int type = port->type; - - if (type >= ARRAY_SIZE(uart_config)) - type = 0; - return uart_config[type].name; -} - -static struct uart_ops m32r_sio_pops = { - .tx_empty = m32r_sio_tx_empty, - .set_mctrl = m32r_sio_set_mctrl, - .get_mctrl = m32r_sio_get_mctrl, - .stop_tx = m32r_sio_stop_tx, - .start_tx = m32r_sio_start_tx, - .stop_rx = m32r_sio_stop_rx, - .enable_ms = m32r_sio_enable_ms, - .break_ctl = m32r_sio_break_ctl, - .startup = m32r_sio_startup, - .shutdown = m32r_sio_shutdown, - .set_termios = m32r_sio_set_termios, - .pm = m32r_sio_pm, - .type = m32r_sio_type, - .release_port = m32r_sio_release_port, - .request_port = m32r_sio_request_port, - .config_port = m32r_sio_config_port, - .verify_port = m32r_sio_verify_port, -}; - -static struct uart_sio_port m32r_sio_ports[UART_NR]; - -static void __init m32r_sio_init_ports(void) -{ - struct uart_sio_port *up; - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); - i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.membase = old_serial_port[i].iomem_base; - up->port.iotype = old_serial_port[i].io_type; - up->port.regshift = old_serial_port[i].iomem_reg_shift; - up->port.ops = &m32r_sio_pops; - } -} - -static void __init m32r_sio_register_ports(struct uart_driver *drv) -{ - int i; - - m32r_sio_init_ports(); - - for (i = 0; i < UART_NR; i++) { - struct uart_sio_port *up = &m32r_sio_ports[i]; - - up->port.line = i; - up->port.ops = &m32r_sio_pops; - init_timer(&up->timer); - up->timer.function = m32r_sio_timeout; - - up->mcr_mask = ~0; - up->mcr_force = 0; - - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE - -/* - * Wait for transmitter & holding register to empty - */ -static inline void wait_for_xmitr(struct uart_sio_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = sio_in(up, SIOSTS); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & UART_EMPTY) != UART_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout) - udelay(1); - } -} - -static void m32r_sio_console_putchar(struct uart_port *port, int ch) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - wait_for_xmitr(up); - sio_out(up, SIOTXB, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void m32r_sio_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_sio_port *up = &m32r_sio_ports[co->index]; - unsigned int ier; - - /* - * First save the UER then disable the interrupts - */ - ier = sio_in(up, SIOTRCR); - sio_out(up, SIOTRCR, 0); - - uart_console_write(&up->port, s, count, m32r_sio_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, SIOTRCR, ier); -} - -static int __init m32r_sio_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - port = &m32r_sio_ports[co->index].port; - - /* - * Temporary fix. - */ - spin_lock_init(&port->lock); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver m32r_sio_reg; -static struct console m32r_sio_console = { - .name = "ttyS", - .write = m32r_sio_console_write, - .device = uart_console_device, - .setup = m32r_sio_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &m32r_sio_reg, -}; - -static int __init m32r_sio_console_init(void) -{ - sio_reset(); - sio_init(); - m32r_sio_init_ports(); - register_console(&m32r_sio_console); - return 0; -} -console_initcall(m32r_sio_console_init); - -#define M32R_SIO_CONSOLE &m32r_sio_console -#else -#define M32R_SIO_CONSOLE NULL -#endif - -static struct uart_driver m32r_sio_reg = { - .owner = THIS_MODULE, - .driver_name = "sio", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = UART_NR, - .cons = M32R_SIO_CONSOLE, -}; - -/** - * m32r_sio_suspend_port - suspend one serial port - * @line: serial line number - * - * Suspend one serial port. - */ -void m32r_sio_suspend_port(int line) -{ - uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); -} - -/** - * m32r_sio_resume_port - resume one serial port - * @line: serial line number - * - * Resume one serial port. - */ -void m32r_sio_resume_port(int line) -{ - uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); -} - -static int __init m32r_sio_init(void) -{ - int ret, i; - - printk(KERN_INFO "Serial: M32R SIO driver\n"); - - for (i = 0; i < nr_irqs; i++) - spin_lock_init(&irq_lists[i].lock); - - ret = uart_register_driver(&m32r_sio_reg); - if (ret >= 0) - m32r_sio_register_ports(&m32r_sio_reg); - - return ret; -} - -static void __exit m32r_sio_exit(void) -{ - int i; - - for (i = 0; i < UART_NR; i++) - uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); - - uart_unregister_driver(&m32r_sio_reg); -} - -module_init(m32r_sio_init); -module_exit(m32r_sio_exit); - -EXPORT_SYMBOL(m32r_sio_suspend_port); -EXPORT_SYMBOL(m32r_sio_resume_port); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic M32R SIO serial driver"); diff --git a/drivers/tty/serial/8250/m32r_sio.h b/drivers/tty/serial/8250/m32r_sio.h deleted file mode 100644 index e9b7e11793b1..000000000000 --- a/drivers/tty/serial/8250/m32r_sio.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * m32r_sio.h - * - * Driver for M32R serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/8250.h. - * - * Copyright (C) 2001 Russell King. - * Copyright (C) 2004 Hirokazu Takata - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - - -struct m32r_sio_probe { - struct module *owner; - int (*pci_init_one)(struct pci_dev *dev); - void (*pci_remove_one)(struct pci_dev *dev); - void (*pnp_init)(void); -}; - -int m32r_sio_register_probe(struct m32r_sio_probe *probe); -void m32r_sio_unregister_probe(struct m32r_sio_probe *probe); -void m32r_sio_get_irq_map(unsigned int *map); -void m32r_sio_suspend_port(int line); -void m32r_sio_resume_port(int line); - -struct old_serial_port { - unsigned int uart; - unsigned int baud_base; - unsigned int port; - unsigned int irq; - unsigned int flags; - unsigned char io_type; - unsigned char __iomem *iomem_base; - unsigned short iomem_reg_shift; -}; - -#define _INLINE_ inline - -#define PROBE_RSA (1 << 0) -#define PROBE_ANY (~0) - -#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) diff --git a/drivers/tty/serial/8250/m32r_sio_reg.h b/drivers/tty/serial/8250/m32r_sio_reg.h deleted file mode 100644 index 4671473793e3..000000000000 --- a/drivers/tty/serial/8250/m32r_sio_reg.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * m32r_sio_reg.h - * - * Copyright (C) 1992, 1994 by Theodore Ts'o. - * Copyright (C) 2004 Hirokazu Takata - * - * Redistribution of this file is permitted under the terms of the GNU - * Public License (GPL) - * - * These are the UART port assignments, expressed as offsets from the base - * register. These assignments should hold for any serial port based on - * a 8250, 16450, or 16550(A). - */ - -#ifndef _M32R_SIO_REG_H -#define _M32R_SIO_REG_H - - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - -#define SIOCR 0x000 -#define SIOMOD0 0x002 -#define SIOMOD1 0x004 -#define SIOSTS 0x006 -#define SIOTRCR 0x008 -#define SIOBAUR 0x00a -// #define SIORBAUR 0x018 -#define SIOTXB 0x00c -#define SIORXB 0x00e - -#define UART_RX ((unsigned long) PLD_ESIO0RXB) - /* In: Receive buffer (DLAB=0) */ -#define UART_TX ((unsigned long) PLD_ESIO0TXB) - /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels - * XR16C85x only */ - -#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER ((unsigned long) PLD_ESIO0INTCR) - /* Out: Interrupt Enable Register */ -#define UART_FCTR 0 /* (LCR=BF) Feature Control Register - * XR16C85x only */ - -#define UART_IIR 0 /* In: Interrupt ID Register */ -#define UART_FCR 0 /* Out: FIFO Control Register */ -#define UART_EFR 0 /* I/O: Extended Features Register */ - /* (DLAB=1, 16C660 only) */ - -#define UART_LCR 0 /* Out: Line Control Register */ -#define UART_MCR 0 /* Out: Modem Control Register */ -#define UART_LSR ((unsigned long) PLD_ESIO0STS) - /* In: Line Status Register */ -#define UART_MSR 0 /* In: Modem Status Register */ -#define UART_SCR 0 /* I/O: Scratch Register */ -#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register - * FCTR bit 6 selects SCR or EMSR - * XR16c85x only */ - -#else /* not CONFIG_SERIAL_M32R_PLDSIO */ - -#define SIOCR 0x000 -#define SIOMOD0 0x004 -#define SIOMOD1 0x008 -#define SIOSTS 0x00c -#define SIOTRCR 0x010 -#define SIOBAUR 0x014 -#define SIORBAUR 0x018 -#define SIOTXB 0x01c -#define SIORXB 0x020 - -#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ -#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels - * XR16C85x only */ - -#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ -#define UART_FCTR 0 /* (LCR=BF) Feature Control Register - * XR16C85x only */ - -#define UART_IIR 0 /* In: Interrupt ID Register */ -#define UART_FCR 0 /* Out: FIFO Control Register */ -#define UART_EFR 0 /* I/O: Extended Features Register */ - /* (DLAB=1, 16C660 only) */ - -#define UART_LCR 0 /* Out: Line Control Register */ -#define UART_MCR 0 /* Out: Modem Control Register */ -#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ -#define UART_MSR 0 /* In: Modem Status Register */ -#define UART_SCR 0 /* I/O: Scratch Register */ -#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register - * FCTR bit 6 selects SCR or EMSR - * XR16c85x only */ - -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - -#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * These are the definitions for the Line Control Register - * - * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting - * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. - */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_TEMT 0x02 /* Transmitter empty */ -#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x00 /* Break interrupt indicator */ -#define UART_LSR_FE 0x80 /* Frame error indicator */ -#define UART_LSR_PE 0x40 /* Parity error indicator */ -#define UART_LSR_OE 0x20 /* Overrun error indicator */ -#define UART_LSR_DR 0x04 /* Receiver data ready */ - -/* - * These are the definitions for the Interrupt Identification Register - */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ - -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -/* - * These are the definitions for the Interrupt Enable Register - */ -#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ - -#endif /* _M32R_SIO_REG_H */ diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c new file mode 100644 index 000000000000..94a6792bf97b --- /dev/null +++ b/drivers/tty/serial/m32r_sio.c @@ -0,0 +1,1191 @@ +/* + * m32r_sio.c + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.c. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. Currently, we don't + * support this very well, and it may well be dropped from this driver + * in future. As such, mapbase should be NULL. + * + * membase is an 'ioremapped' cookie. This is compatible with the old + * serial.c driver, and is currently the preferred form. + */ + +#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define PORT_M32R_BASE PORT_M32R_SIO +#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) +#define BAUD_RATE 115200 + +#include +#include "m32r_sio.h" +#include "m32r_sio_reg.h" + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#define BASE_BAUD 115200 + +/* Standard COM flags */ +#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) + +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#if defined(CONFIG_PLAT_USRV) + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ + +#else /* !CONFIG_PLAT_USRV */ + +#if defined(CONFIG_SERIAL_M32R_PLDSIO) +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ + STD_COM_FLAGS }, /* ttyS0 */ +#else +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ + STD_COM_FLAGS }, /* ttyS0 */ +#endif + +#endif /* !CONFIG_PLAT_USRV */ + +static struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS +}; + +#define UART_NR ARRAY_SIZE(old_serial_port) + +struct uart_sio_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +static struct irq_info irq_lists[NR_IRQS]; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, + [PORT_INDEX(PORT_M32R_SIO)] = { + .name = "M32RSIO", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, +}; + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define __sio_in(x) inw((unsigned long)(x)) +#define __sio_out(v,x) outw((v),(unsigned long)(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned short sbaud; + sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; + __sio_out(sbaud, PLD_ESIO0BAUR); +} + +static void sio_reset(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_init(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); +} + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define __sio_in(x) inl(x) +#define __sio_out(v,x) outl((v),(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned long i, j; + + i = boot_cpu_data.bus_clock / (baud * 16); + j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; + i -= 1; + j = (j + 1) >> 1; + + __sio_out(i, M32R_SIO0_BAUR_PORTL); + __sio_out(j, M32R_SIO0_RBAUR_PORTL); +} + +static void sio_reset(void) +{ + __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ + __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ + __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ +} + +static void sio_init(void) +{ + unsigned int tmp; + + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_STS_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); +} + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +static unsigned int sio_in(struct uart_sio_port *up, int offset) +{ + return __sio_in(up->port.iobase + offset); +} + +static void sio_out(struct uart_sio_port *up, int offset, int value) +{ + __sio_out(value, up->port.iobase + offset); +} + +static unsigned int serial_in(struct uart_sio_port *up, int offset) +{ + if (!offset) + return 0; + + return __sio_in(offset); +} + +static void serial_out(struct uart_sio_port *up, int offset, int value) +{ + if (!offset) + return; + + __sio_out(value, offset); +} + +static void m32r_sio_stop_tx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void m32r_sio_start_tx(struct uart_port *port) +{ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct circ_buf *xmit = &up->port.state->xmit; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } + while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); +#else + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +#endif +} + +static void m32r_sio_stop_rx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void m32r_sio_enable_ms(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void receive_chars(struct uart_sio_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch; + unsigned char flag; + int max_count = 256; + + do { + ch = sio_in(up, SIORXB); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) + tty_insert_flip_char(tty, ch, flag); + + if (*status & UART_LSR_OE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_sio_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { +#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ + serial_out(up, UART_TX, up->port.x_char); +#endif + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + m32r_sio_stop_tx(&up->port); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); + + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + m32r_sio_stop_tx(&up->port); +} + +/* + * This handles the interrupt from one port. + */ +static inline void m32r_sio_handle_port(struct uart_sio_port *up, + unsigned int status) +{ + DEBUG_INTR("status = %x...", status); + + if (status & 0x04) + receive_chars(up, &status); + if (status & 0x01) + transmit_chars(up); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0; + + DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO +// if (irq == PLD_IRQ_SIO0_SND) +// irq = PLD_IRQ_SIO0_RCV; +#else + if (irq == M32R_IRQ_SIO0_S) + irq = M32R_IRQ_SIO0_R; +#endif + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_sio_port *up; + unsigned int sts; + + up = list_entry(l, struct uart_sio_port, list); + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + if (sts & 0xe0) + sio_error(&sts); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_HANDLED; +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + int ret, irq_flags = 0; + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(up->port.irq, m32r_sio_interrupt, + irq_flags, "SIO0-RX", i); + ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, + irq_flags, "SIO0-TX", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) { + free_irq(up->port.irq, i); + free_irq(up->port.irq + 1, i); + } + + serial_do_unlink(i, up); +} + +/* + * This function is used to handle ports that do not have an interrupt. + */ +static void m32r_sio_timeout(unsigned long data) +{ + struct uart_sio_port *up = (struct uart_sio_port *)data; + unsigned int timeout; + unsigned int sts; + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + } + + timeout = up->port.timeout; + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + mod_timer(&up->timer, jiffies + timeout); +} + +static unsigned int m32r_sio_tx_empty(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int m32r_sio_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + +} + +static void m32r_sio_break_ctl(struct uart_port *port, int break_state) +{ + +} + +static int m32r_sio_startup(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + int retval; + + sio_init(); + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + unsigned int timeout = up->port.timeout; + + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + timeout); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + * - M32R_SIO: 0x0c + * - M32R_PLDSIO: 0x04 + */ + up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + sio_out(up, SIOTRCR, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + sio_reset(); + + return 0; +} + +static void m32r_sio_shutdown(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + sio_out(up, SIOTRCR, 0); + + /* + * Disable break condition and FIFOs + */ + + sio_init(); + + if (!is_real_interrupt(up->port.irq)) + del_timer_sync(&up->timer); + else + serial_unlink_irq_chain(up); +} + +static unsigned int m32r_sio_get_divisor(struct uart_port *port, + unsigned int baud) +{ + return uart_get_divisor(port, baud); +} + +static void m32r_sio_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned char cval = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); +#else + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); +#endif + quot = m32r_sio_get_divisor(port, baud); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + sio_set_baud_rate(baud); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + up->lcr = cval; /* Save LCR */ + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void m32r_sio_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->pm) + up->pm(port, state, oldstate); +} + +/* + * Resource handling. This is complicated by the fact that resources + * depend on the port type. Maybe we should be claiming the standard + * 8250 ports, and then trying to get other resources as necessary? + */ +static int +m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) +{ + unsigned int size = 8 << up->port.regshift; +#ifndef CONFIG_SERIAL_M32R_PLDSIO + unsigned long start; +#endif + int ret = 0; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { +#ifdef CONFIG_SERIAL_M32R_PLDSIO + *res = request_mem_region(up->port.mapbase, size, "serial"); +#else + start = up->port.mapbase; + *res = request_mem_region(start, size, "serial"); +#endif + if (!*res) + ret = -EBUSY; + } + break; + + case UPIO_PORT: + *res = request_region(up->port.iobase, size, "serial"); + if (!*res) + ret = -EBUSY; + break; + } + return ret; +} + +static void m32r_sio_release_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long start, offset = 0, size = 0; + + size <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { + /* + * Unmap the area. + */ + iounmap(up->port.membase); + up->port.membase = NULL; + + start = up->port.mapbase; + + if (size) + release_mem_region(start + offset, size); + release_mem_region(start, 8 << up->port.regshift); + } + break; + + case UPIO_PORT: + start = up->port.iobase; + + if (size) + release_region(start + offset, size); + release_region(start + offset, 8 << up->port.regshift); + break; + + default: + break; + } +} + +static int m32r_sio_request_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct resource *res = NULL; + int ret = 0; + + ret = m32r_sio_request_std_resource(up, &res); + + /* + * If we have a mapbase, then request that as well. + */ + if (ret == 0 && up->port.flags & UPF_IOREMAP) { + int size = resource_size(res); + + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) + ret = -ENOMEM; + } + + if (ret < 0) { + if (res) + release_resource(res); + } + + return ret; +} + +static void m32r_sio_config_port(struct uart_port *port, int unused) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int +m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config)) + return -EINVAL; + return 0; +} + +static const char * +m32r_sio_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops m32r_sio_pops = { + .tx_empty = m32r_sio_tx_empty, + .set_mctrl = m32r_sio_set_mctrl, + .get_mctrl = m32r_sio_get_mctrl, + .stop_tx = m32r_sio_stop_tx, + .start_tx = m32r_sio_start_tx, + .stop_rx = m32r_sio_stop_rx, + .enable_ms = m32r_sio_enable_ms, + .break_ctl = m32r_sio_break_ctl, + .startup = m32r_sio_startup, + .shutdown = m32r_sio_shutdown, + .set_termios = m32r_sio_set_termios, + .pm = m32r_sio_pm, + .type = m32r_sio_type, + .release_port = m32r_sio_release_port, + .request_port = m32r_sio_request_port, + .config_port = m32r_sio_config_port, + .verify_port = m32r_sio_verify_port, +}; + +static struct uart_sio_port m32r_sio_ports[UART_NR]; + +static void __init m32r_sio_init_ports(void) +{ + struct uart_sio_port *up; + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + up->port.ops = &m32r_sio_pops; + } +} + +static void __init m32r_sio_register_ports(struct uart_driver *drv) +{ + int i; + + m32r_sio_init_ports(); + + for (i = 0; i < UART_NR; i++) { + struct uart_sio_port *up = &m32r_sio_ports[i]; + + up->port.line = i; + up->port.ops = &m32r_sio_pops; + init_timer(&up->timer); + up->timer.function = m32r_sio_timeout; + + up->mcr_mask = ~0; + up->mcr_force = 0; + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_sio_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = sio_in(up, SIOSTS); + + if (--tmout == 0) + break; + udelay(1); + } while ((status & UART_EMPTY) != UART_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) + udelay(1); + } +} + +static void m32r_sio_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + wait_for_xmitr(up); + sio_out(up, SIOTXB, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void m32r_sio_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sio_port *up = &m32r_sio_ports[co->index]; + unsigned int ier; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, SIOTRCR); + sio_out(up, SIOTRCR, 0); + + uart_console_write(&up->port, s, count, m32r_sio_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, SIOTRCR, ier); +} + +static int __init m32r_sio_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &m32r_sio_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver m32r_sio_reg; +static struct console m32r_sio_console = { + .name = "ttyS", + .write = m32r_sio_console_write, + .device = uart_console_device, + .setup = m32r_sio_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &m32r_sio_reg, +}; + +static int __init m32r_sio_console_init(void) +{ + sio_reset(); + sio_init(); + m32r_sio_init_ports(); + register_console(&m32r_sio_console); + return 0; +} +console_initcall(m32r_sio_console_init); + +#define M32R_SIO_CONSOLE &m32r_sio_console +#else +#define M32R_SIO_CONSOLE NULL +#endif + +static struct uart_driver m32r_sio_reg = { + .owner = THIS_MODULE, + .driver_name = "sio", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = M32R_SIO_CONSOLE, +}; + +/** + * m32r_sio_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void m32r_sio_suspend_port(int line) +{ + uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +/** + * m32r_sio_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void m32r_sio_resume_port(int line) +{ + uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +static int __init m32r_sio_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: M32R SIO driver\n"); + + for (i = 0; i < nr_irqs; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = uart_register_driver(&m32r_sio_reg); + if (ret >= 0) + m32r_sio_register_ports(&m32r_sio_reg); + + return ret; +} + +static void __exit m32r_sio_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); + + uart_unregister_driver(&m32r_sio_reg); +} + +module_init(m32r_sio_init); +module_exit(m32r_sio_exit); + +EXPORT_SYMBOL(m32r_sio_suspend_port); +EXPORT_SYMBOL(m32r_sio_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic M32R SIO serial driver"); diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/m32r_sio.h new file mode 100644 index 000000000000..e9b7e11793b1 --- /dev/null +++ b/drivers/tty/serial/m32r_sio.h @@ -0,0 +1,48 @@ +/* + * m32r_sio.h + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.h. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +struct m32r_sio_probe { + struct module *owner; + int (*pci_init_one)(struct pci_dev *dev); + void (*pci_remove_one)(struct pci_dev *dev); + void (*pnp_init)(void); +}; + +int m32r_sio_register_probe(struct m32r_sio_probe *probe); +void m32r_sio_unregister_probe(struct m32r_sio_probe *probe); +void m32r_sio_get_irq_map(unsigned int *map); +void m32r_sio_suspend_port(int line); +void m32r_sio_resume_port(int line); + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char io_type; + unsigned char __iomem *iomem_base; + unsigned short iomem_reg_shift; +}; + +#define _INLINE_ inline + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/m32r_sio_reg.h new file mode 100644 index 000000000000..4671473793e3 --- /dev/null +++ b/drivers/tty/serial/m32r_sio_reg.h @@ -0,0 +1,152 @@ +/* + * m32r_sio_reg.h + * + * Copyright (C) 1992, 1994 by Theodore Ts'o. + * Copyright (C) 2004 Hirokazu Takata + * + * Redistribution of this file is permitted under the terms of the GNU + * Public License (GPL) + * + * These are the UART port assignments, expressed as offsets from the base + * register. These assignments should hold for any serial port based on + * a 8250, 16450, or 16550(A). + */ + +#ifndef _M32R_SIO_REG_H +#define _M32R_SIO_REG_H + + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define SIOCR 0x000 +#define SIOMOD0 0x002 +#define SIOMOD1 0x004 +#define SIOSTS 0x006 +#define SIOTRCR 0x008 +#define SIOBAUR 0x00a +// #define SIORBAUR 0x018 +#define SIOTXB 0x00c +#define SIORXB 0x00e + +#define UART_RX ((unsigned long) PLD_ESIO0RXB) + /* In: Receive buffer (DLAB=0) */ +#define UART_TX ((unsigned long) PLD_ESIO0TXB) + /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER ((unsigned long) PLD_ESIO0INTCR) + /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR ((unsigned long) PLD_ESIO0STS) + /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define SIOCR 0x000 +#define SIOMOD0 0x004 +#define SIOMOD1 0x008 +#define SIOSTS 0x00c +#define SIOTRCR 0x010 +#define SIOBAUR 0x014 +#define SIORBAUR 0x018 +#define SIOTXB 0x01c +#define SIORXB 0x020 + +#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ +#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * These are the definitions for the Line Control Register + * + * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting + * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. + */ +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x02 /* Transmitter empty */ +#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x00 /* Break interrupt indicator */ +#define UART_LSR_FE 0x80 /* Frame error indicator */ +#define UART_LSR_PE 0x40 /* Parity error indicator */ +#define UART_LSR_OE 0x20 /* Overrun error indicator */ +#define UART_LSR_DR 0x04 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ + +#endif /* _M32R_SIO_REG_H */ -- cgit v1.2.3-55-g7522 From 15f51136719699d7204eeeccd66849a4d90ae426 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 7 Feb 2012 08:20:37 -0800 Subject: ACPI: remove duplicated lines of merging problems with acpi_processor_add Those lines have two copies. Not sure how it could happen, looks like git problem. Signed-off-by: Yinghai Lu Cc: Linus Torvalds Cc: Thomas Renninger Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/processor_driver.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 2b805d7ef317..8ae05ce18500 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -579,13 +579,6 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) goto err_free_cpumask; } - /* - * Do not start hotplugged CPUs now, but when they - * are onlined the first time - */ - if (pr->flags.need_hotplug_init) - return 0; - /* * Do not start hotplugged CPUs now, but when they * are onlined the first time -- cgit v1.2.3-55-g7522 From 29bb5d4fd3140a7d5d02d858118c74a45f15c296 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 8 Feb 2012 15:11:17 -0800 Subject: driver-core: cpu: fix kobject warning when hotplugging a cpu Due to the sysdev conversion to struct device, the cpu objects get reused when adding a cpu after offlining it, which causes a big warning that the kobject portion is not properly initialized. So clear out the object before we register it again, so all is quiet. Reported-by: Konrad Rzeszutek Wilk Tested-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman --- drivers/base/cpu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 23f2c4cd48d1..4dabf5077c48 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -240,6 +240,7 @@ int __cpuinit register_cpu(struct cpu *cpu, int num) int error; cpu->node_id = cpu_to_node(num); + memset(&cpu->dev, 0x00, sizeof(struct device)); cpu->dev.id = num; cpu->dev.bus = &cpu_subsys; cpu->dev.release = cpu_device_release; -- cgit v1.2.3-55-g7522 From 936d7de3d736e0737542641269436f4b5968e9ef Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 7 Feb 2012 14:51:21 +0000 Subject: IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses Commit a0417fa3a18a ("net: Make qdisc_skb_cb upper size bound explicit.") made it possible for a netdev driver to use skb->cb between its header_ops.create method and its .ndo_start_xmit method. Use this in ipoib_hard_header() to stash away the LL address (GID + QPN), instead of the "ipoib_pseudoheader" hack. This allows IPoIB to stop lying about its hard_header_len, which will let us fix the L2 check for GRO. Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- drivers/infiniband/ulp/ipoib/ipoib.h | 6 ++- drivers/infiniband/ulp/ipoib/ipoib_main.c | 55 +++++++++----------------- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 10 +---- 3 files changed, 24 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index b3cc1e062b17..86df632ea612 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -44,6 +44,7 @@ #include #include +#include #include @@ -117,8 +118,9 @@ struct ipoib_header { u16 reserved; }; -struct ipoib_pseudoheader { - u8 hwaddr[INFINIBAND_ALEN]; +struct ipoib_cb { + struct qdisc_skb_cb qdisc_cb; + u8 hwaddr[INFINIBAND_ALEN]; }; /* Used for all multicast joins (broadcast, IPv4 mcast and IPv6 mcast) */ diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 3514ca05deea..3974c290b667 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -653,7 +653,7 @@ static void ipoib_path_lookup(struct sk_buff *skb, struct neighbour *n, struct n } static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, - struct ipoib_pseudoheader *phdr) + struct ipoib_cb *cb) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_path *path; @@ -661,17 +661,15 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, spin_lock_irqsave(&priv->lock, flags); - path = __path_find(dev, phdr->hwaddr + 4); + path = __path_find(dev, cb->hwaddr + 4); if (!path || !path->valid) { int new_path = 0; if (!path) { - path = path_rec_create(dev, phdr->hwaddr + 4); + path = path_rec_create(dev, cb->hwaddr + 4); new_path = 1; } if (path) { - /* put pseudoheader back on for next time */ - skb_push(skb, sizeof *phdr); __skb_queue_tail(&path->queue, skb); if (!path->query && path_rec_start(dev, path)) { @@ -695,12 +693,10 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, be16_to_cpu(path->pathrec.dlid)); spin_unlock_irqrestore(&priv->lock, flags); - ipoib_send(dev, skb, path->ah, IPOIB_QPN(phdr->hwaddr)); + ipoib_send(dev, skb, path->ah, IPOIB_QPN(cb->hwaddr)); return; } else if ((path->query || !path_rec_start(dev, path)) && skb_queue_len(&path->queue) < IPOIB_MAX_PATH_REC_QUEUE) { - /* put pseudoheader back on for next time */ - skb_push(skb, sizeof *phdr); __skb_queue_tail(&path->queue, skb); } else { ++dev->stats.tx_dropped; @@ -774,16 +770,14 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) dev_kfree_skb_any(skb); } } else { - struct ipoib_pseudoheader *phdr = - (struct ipoib_pseudoheader *) skb->data; - skb_pull(skb, sizeof *phdr); + struct ipoib_cb *cb = (struct ipoib_cb *) skb->cb; - if (phdr->hwaddr[4] == 0xff) { + if (cb->hwaddr[4] == 0xff) { /* Add in the P_Key for multicast*/ - phdr->hwaddr[8] = (priv->pkey >> 8) & 0xff; - phdr->hwaddr[9] = priv->pkey & 0xff; + cb->hwaddr[8] = (priv->pkey >> 8) & 0xff; + cb->hwaddr[9] = priv->pkey & 0xff; - ipoib_mcast_send(dev, phdr->hwaddr + 4, skb); + ipoib_mcast_send(dev, cb->hwaddr + 4, skb); } else { /* unicast GID -- should be ARP or RARP reply */ @@ -792,14 +786,14 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) ipoib_warn(priv, "Unicast, no %s: type %04x, QPN %06x %pI6\n", skb_dst(skb) ? "neigh" : "dst", be16_to_cpup((__be16 *) skb->data), - IPOIB_QPN(phdr->hwaddr), - phdr->hwaddr + 4); + IPOIB_QPN(cb->hwaddr), + cb->hwaddr + 4); dev_kfree_skb_any(skb); ++dev->stats.tx_dropped; goto unlock; } - unicast_arp_send(skb, dev, phdr); + unicast_arp_send(skb, dev, cb); } } unlock: @@ -825,8 +819,6 @@ static int ipoib_hard_header(struct sk_buff *skb, const void *daddr, const void *saddr, unsigned len) { struct ipoib_header *header; - struct dst_entry *dst; - struct neighbour *n; header = (struct ipoib_header *) skb_push(skb, sizeof *header); @@ -834,18 +826,13 @@ static int ipoib_hard_header(struct sk_buff *skb, header->reserved = 0; /* - * If we don't have a neighbour structure, stuff the - * destination address onto the front of the skb so we can - * figure out where to send the packet later. + * If we don't have a dst_entry structure, stuff the + * destination address into skb->cb so we can figure out where + * to send the packet later. */ - dst = skb_dst(skb); - n = NULL; - if (dst) - n = dst_get_neighbour_noref_raw(dst); - if ((!dst || !n) && daddr) { - struct ipoib_pseudoheader *phdr = - (struct ipoib_pseudoheader *) skb_push(skb, sizeof *phdr); - memcpy(phdr->hwaddr, daddr, INFINIBAND_ALEN); + if (!skb_dst(skb)) { + struct ipoib_cb *cb = (struct ipoib_cb *) skb->cb; + memcpy(cb->hwaddr, daddr, INFINIBAND_ALEN); } return 0; @@ -1021,11 +1008,7 @@ static void ipoib_setup(struct net_device *dev) dev->flags |= IFF_BROADCAST | IFF_MULTICAST; - /* - * We add in INFINIBAND_ALEN to allow for the destination - * address "pseudoheader" for skbs without neighbour struct. - */ - dev->hard_header_len = IPOIB_ENCAP_LEN + INFINIBAND_ALEN; + dev->hard_header_len = IPOIB_ENCAP_LEN; dev->addr_len = INFINIBAND_ALEN; dev->type = ARPHRD_INFINIBAND; dev->tx_queue_len = ipoib_sendq_size * 2; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index f7ff9dd66cda..20ebc6fd1bb9 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -262,21 +262,13 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, netif_tx_lock_bh(dev); while (!skb_queue_empty(&mcast->pkt_queue)) { struct sk_buff *skb = skb_dequeue(&mcast->pkt_queue); - struct dst_entry *dst = skb_dst(skb); - struct neighbour *n = NULL; netif_tx_unlock_bh(dev); skb->dev = dev; - if (dst) - n = dst_get_neighbour_noref_raw(dst); - if (!dst || !n) { - /* put pseudoheader back on for next time */ - skb_push(skb, sizeof (struct ipoib_pseudoheader)); - } - if (dev_queue_xmit(skb)) ipoib_warn(priv, "dev_queue_xmit failed to requeue packet\n"); + netif_tx_lock_bh(dev); } netif_tx_unlock_bh(dev); -- cgit v1.2.3-55-g7522 From 67435319866f89b55721fc88ca0dbda51629e3d6 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Thu, 9 Feb 2012 02:44:50 +0300 Subject: staging: pohmelfs: remove drivers/staging/pohmelfs New pohmelfs is coming, and it is time to remove deadly old design https://lkml.org/lkml/2012/2/8/293 Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/pohmelfs/Kconfig | 20 - drivers/staging/pohmelfs/Makefile | 3 - drivers/staging/pohmelfs/config.c | 611 ---------- drivers/staging/pohmelfs/crypto.c | 878 -------------- drivers/staging/pohmelfs/dir.c | 1102 ------------------ drivers/staging/pohmelfs/inode.c | 2055 --------------------------------- drivers/staging/pohmelfs/lock.c | 182 --- drivers/staging/pohmelfs/mcache.c | 171 --- drivers/staging/pohmelfs/net.c | 1209 ------------------- drivers/staging/pohmelfs/netfs.h | 919 --------------- drivers/staging/pohmelfs/path_entry.c | 120 -- drivers/staging/pohmelfs/trans.c | 706 ----------- 14 files changed, 7979 deletions(-) delete mode 100644 drivers/staging/pohmelfs/Kconfig delete mode 100644 drivers/staging/pohmelfs/Makefile delete mode 100644 drivers/staging/pohmelfs/config.c delete mode 100644 drivers/staging/pohmelfs/crypto.c delete mode 100644 drivers/staging/pohmelfs/dir.c delete mode 100644 drivers/staging/pohmelfs/inode.c delete mode 100644 drivers/staging/pohmelfs/lock.c delete mode 100644 drivers/staging/pohmelfs/mcache.c delete mode 100644 drivers/staging/pohmelfs/net.c delete mode 100644 drivers/staging/pohmelfs/netfs.h delete mode 100644 drivers/staging/pohmelfs/path_entry.c delete mode 100644 drivers/staging/pohmelfs/trans.c (limited to 'drivers') diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index b31194c8272d..9e6347249783 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -60,8 +60,6 @@ source "drivers/staging/rts5139/Kconfig" source "drivers/staging/frontier/Kconfig" -source "drivers/staging/pohmelfs/Kconfig" - source "drivers/staging/phison/Kconfig" source "drivers/staging/line6/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index b5813c46378d..943e14830753 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_R8712U) += rtl8712/ obj-$(CONFIG_RTS_PSTOR) += rts_pstor/ obj-$(CONFIG_RTS5139) += rts5139/ obj-$(CONFIG_TRANZPORT) += frontier/ -obj-$(CONFIG_POHMELFS) += pohmelfs/ obj-$(CONFIG_IDE_PHISON) += phison/ obj-$(CONFIG_LINE6_USB) += line6/ obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2/ diff --git a/drivers/staging/pohmelfs/Kconfig b/drivers/staging/pohmelfs/Kconfig deleted file mode 100644 index 8d53b1a1e715..000000000000 --- a/drivers/staging/pohmelfs/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -config POHMELFS - tristate "POHMELFS filesystem support" - depends on NET - select CONNECTOR - select CRYPTO - select CRYPTO_BLKCIPHER - select CRYPTO_HMAC - help - POHMELFS stands for Parallel Optimized Host Message Exchange Layered - File System. This is a network filesystem which supports coherent - caching of data and metadata on clients. - -config POHMELFS_DEBUG - bool "POHMELFS debugging" - depends on POHMELFS - default n - help - Turns on excessive POHMELFS debugging facilities. - You usually do not want to slow things down noticeably and get really - lots of kernel messages in syslog. diff --git a/drivers/staging/pohmelfs/Makefile b/drivers/staging/pohmelfs/Makefile deleted file mode 100644 index 196561ca26bc..000000000000 --- a/drivers/staging/pohmelfs/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_POHMELFS) += pohmelfs.o - -pohmelfs-y := inode.o config.o dir.o net.o path_entry.o trans.o crypto.o lock.o mcache.o diff --git a/drivers/staging/pohmelfs/config.c b/drivers/staging/pohmelfs/config.c deleted file mode 100644 index b6c42cb0d1c6..000000000000 --- a/drivers/staging/pohmelfs/config.c +++ /dev/null @@ -1,611 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "netfs.h" - -/* - * Global configuration list. - * Each client can be asked to get one of them. - * - * Allows to provide remote server address (ipv4/v6/whatever), port - * and so on via kernel connector. - */ - -static struct cb_id pohmelfs_cn_id = {.idx = POHMELFS_CN_IDX, .val = POHMELFS_CN_VAL}; -static LIST_HEAD(pohmelfs_config_list); -static DEFINE_MUTEX(pohmelfs_config_lock); - -static inline int pohmelfs_config_eql(struct pohmelfs_ctl *sc, struct pohmelfs_ctl *ctl) -{ - if (sc->idx == ctl->idx && sc->type == ctl->type && - sc->proto == ctl->proto && - sc->addrlen == ctl->addrlen && - !memcmp(&sc->addr, &ctl->addr, ctl->addrlen)) - return 1; - - return 0; -} - -static struct pohmelfs_config_group *pohmelfs_find_config_group(unsigned int idx) -{ - struct pohmelfs_config_group *g, *group = NULL; - - list_for_each_entry(g, &pohmelfs_config_list, group_entry) { - if (g->idx == idx) { - group = g; - break; - } - } - - return group; -} - -static struct pohmelfs_config_group *pohmelfs_find_create_config_group(unsigned int idx) -{ - struct pohmelfs_config_group *g; - - g = pohmelfs_find_config_group(idx); - if (g) - return g; - - g = kzalloc(sizeof(struct pohmelfs_config_group), GFP_KERNEL); - if (!g) - return NULL; - - INIT_LIST_HEAD(&g->config_list); - g->idx = idx; - g->num_entry = 0; - - list_add_tail(&g->group_entry, &pohmelfs_config_list); - - return g; -} - -static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst) -{ - struct pohmelfs_config *tmp; - - INIT_LIST_HEAD(&dst->config_entry); - - list_for_each_entry(tmp, &psb->state_list, config_entry) { - if (dst->state.ctl.prio > tmp->state.ctl.prio) - list_add_tail(&dst->config_entry, &tmp->config_entry); - } - if (list_empty(&dst->config_entry)) - list_add_tail(&dst->config_entry, &psb->state_list); -} - -static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb, - struct pohmelfs_config *dst, struct pohmelfs_config *new) -{ - if ((dst->state.ctl.prio == new->state.ctl.prio) && - (dst->state.ctl.perm == new->state.ctl.perm)) - return 0; - - dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n", - __func__, dst->state.ctl.prio, dst->state.ctl.perm, - new->state.ctl.prio, new->state.ctl.perm); - dst->state.ctl.prio = new->state.ctl.prio; - dst->state.ctl.perm = new->state.ctl.perm; - - list_del_init(&dst->config_entry); - pohmelfs_insert_config_entry(psb, dst); - return 0; -} - -/* - * pohmelfs_copy_config() is used to copy new state configs from the - * config group (controlled by the netlink messages) into the superblock. - * This happens either at startup time where no transactions can access - * the list of the configs (and thus list of the network states), or at - * run-time, where it is protected by the psb->state_lock. - */ -int pohmelfs_copy_config(struct pohmelfs_sb *psb) -{ - struct pohmelfs_config_group *g; - struct pohmelfs_config *c, *dst; - int err = -ENODEV; - - mutex_lock(&pohmelfs_config_lock); - - g = pohmelfs_find_config_group(psb->idx); - if (!g) - goto out_unlock; - - /* - * Run over all entries in given config group and try to create and - * initialize those, which do not exist in superblock list. - * Skip all existing entries. - */ - - list_for_each_entry(c, &g->config_list, config_entry) { - err = 0; - list_for_each_entry(dst, &psb->state_list, config_entry) { - if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) { - err = pohmelfs_move_config_entry(psb, dst, c); - if (!err) - err = -EEXIST; - break; - } - } - - if (err) - continue; - - dst = kzalloc(sizeof(struct pohmelfs_config), GFP_KERNEL); - if (!dst) { - err = -ENOMEM; - break; - } - - memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl)); - - pohmelfs_insert_config_entry(psb, dst); - - err = pohmelfs_state_init_one(psb, dst); - if (err) { - list_del(&dst->config_entry); - kfree(dst); - } - - err = 0; - } - -out_unlock: - mutex_unlock(&pohmelfs_config_lock); - - return err; -} - -int pohmelfs_copy_crypto(struct pohmelfs_sb *psb) -{ - struct pohmelfs_config_group *g; - int err = -ENOENT; - - mutex_lock(&pohmelfs_config_lock); - g = pohmelfs_find_config_group(psb->idx); - if (!g) - goto err_out_exit; - - if (g->hash_string) { - err = -ENOMEM; - psb->hash_string = kstrdup(g->hash_string, GFP_KERNEL); - if (!psb->hash_string) - goto err_out_exit; - psb->hash_strlen = g->hash_strlen; - } - - if (g->cipher_string) { - psb->cipher_string = kstrdup(g->cipher_string, GFP_KERNEL); - if (!psb->cipher_string) - goto err_out_free_hash_string; - psb->cipher_strlen = g->cipher_strlen; - } - - if (g->hash_keysize) { - psb->hash_key = kmemdup(g->hash_key, g->hash_keysize, - GFP_KERNEL); - if (!psb->hash_key) - goto err_out_free_cipher_string; - psb->hash_keysize = g->hash_keysize; - } - - if (g->cipher_keysize) { - psb->cipher_key = kmemdup(g->cipher_key, g->cipher_keysize, - GFP_KERNEL); - if (!psb->cipher_key) - goto err_out_free_hash; - psb->cipher_keysize = g->cipher_keysize; - } - - mutex_unlock(&pohmelfs_config_lock); - - return 0; - -err_out_free_hash: - kfree(psb->hash_key); -err_out_free_cipher_string: - kfree(psb->cipher_string); -err_out_free_hash_string: - kfree(psb->hash_string); -err_out_exit: - mutex_unlock(&pohmelfs_config_lock); - return err; -} - -static int pohmelfs_send_reply(int err, int msg_num, int action, struct cn_msg *msg, struct pohmelfs_ctl *ctl) -{ - struct pohmelfs_cn_ack *ack; - - ack = kzalloc(sizeof(struct pohmelfs_cn_ack), GFP_KERNEL); - if (!ack) - return -ENOMEM; - - memcpy(&ack->msg, msg, sizeof(struct cn_msg)); - - if (action == POHMELFS_CTLINFO_ACK) - memcpy(&ack->ctl, ctl, sizeof(struct pohmelfs_ctl)); - - ack->msg.len = sizeof(struct pohmelfs_cn_ack) - sizeof(struct cn_msg); - ack->msg.ack = msg->ack + 1; - ack->error = err; - ack->msg_num = msg_num; - - cn_netlink_send(&ack->msg, 0, GFP_KERNEL); - kfree(ack); - return 0; -} - -static int pohmelfs_cn_disp(struct cn_msg *msg) -{ - struct pohmelfs_config_group *g; - struct pohmelfs_ctl *ctl = (struct pohmelfs_ctl *)msg->data; - struct pohmelfs_config *c, *tmp; - int err = 0, i = 1; - - if (msg->len != sizeof(struct pohmelfs_ctl)) - return -EBADMSG; - - mutex_lock(&pohmelfs_config_lock); - - g = pohmelfs_find_config_group(ctl->idx); - if (!g) { - pohmelfs_send_reply(err, 0, POHMELFS_NOINFO_ACK, msg, NULL); - goto out_unlock; - } - - list_for_each_entry_safe(c, tmp, &g->config_list, config_entry) { - struct pohmelfs_ctl *sc = &c->state.ctl; - if (pohmelfs_send_reply(err, g->num_entry - i, POHMELFS_CTLINFO_ACK, msg, sc)) { - err = -ENOMEM; - goto out_unlock; - } - i += 1; - } - - out_unlock: - mutex_unlock(&pohmelfs_config_lock); - return err; -} - -static int pohmelfs_cn_dump(struct cn_msg *msg) -{ - struct pohmelfs_config_group *g; - struct pohmelfs_config *c, *tmp; - int err = 0, i = 1; - int total_msg = 0; - - if (msg->len != sizeof(struct pohmelfs_ctl)) - return -EBADMSG; - - mutex_lock(&pohmelfs_config_lock); - - list_for_each_entry(g, &pohmelfs_config_list, group_entry) - total_msg += g->num_entry; - if (total_msg == 0) { - if (pohmelfs_send_reply(err, 0, POHMELFS_NOINFO_ACK, msg, NULL)) - err = -ENOMEM; - goto out_unlock; - } - - list_for_each_entry(g, &pohmelfs_config_list, group_entry) { - list_for_each_entry_safe(c, tmp, &g->config_list, - config_entry) { - struct pohmelfs_ctl *sc = &c->state.ctl; - if (pohmelfs_send_reply(err, total_msg - i, - POHMELFS_CTLINFO_ACK, msg, - sc)) { - err = -ENOMEM; - goto out_unlock; - } - i += 1; - } - } - -out_unlock: - mutex_unlock(&pohmelfs_config_lock); - return err; -} - -static int pohmelfs_cn_flush(struct cn_msg *msg) -{ - struct pohmelfs_config_group *g; - struct pohmelfs_ctl *ctl = (struct pohmelfs_ctl *)msg->data; - struct pohmelfs_config *c, *tmp; - int err = 0; - - if (msg->len != sizeof(struct pohmelfs_ctl)) - return -EBADMSG; - - mutex_lock(&pohmelfs_config_lock); - - if (ctl->idx != POHMELFS_NULL_IDX) { - g = pohmelfs_find_config_group(ctl->idx); - - if (!g) - goto out_unlock; - - list_for_each_entry_safe(c, tmp, &g->config_list, config_entry) { - list_del(&c->config_entry); - g->num_entry--; - kfree(c); - } - } else { - list_for_each_entry(g, &pohmelfs_config_list, group_entry) { - list_for_each_entry_safe(c, tmp, &g->config_list, - config_entry) { - list_del(&c->config_entry); - g->num_entry--; - kfree(c); - } - } - } - -out_unlock: - mutex_unlock(&pohmelfs_config_lock); - pohmelfs_cn_dump(msg); - - return err; -} - -static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new) -{ - old->perm = new->perm; - old->prio = new->prio; - return 0; -} - -static int pohmelfs_cn_ctl(struct cn_msg *msg, int action) -{ - struct pohmelfs_config_group *g; - struct pohmelfs_ctl *ctl = (struct pohmelfs_ctl *)msg->data; - struct pohmelfs_config *c, *tmp; - int err = 0; - - if (msg->len != sizeof(struct pohmelfs_ctl)) - return -EBADMSG; - - mutex_lock(&pohmelfs_config_lock); - - g = pohmelfs_find_create_config_group(ctl->idx); - if (!g) { - err = -ENOMEM; - goto out_unlock; - } - - list_for_each_entry_safe(c, tmp, &g->config_list, config_entry) { - struct pohmelfs_ctl *sc = &c->state.ctl; - - if (pohmelfs_config_eql(sc, ctl)) { - if (action == POHMELFS_FLAGS_ADD) { - err = -EEXIST; - goto out_unlock; - } else if (action == POHMELFS_FLAGS_DEL) { - list_del(&c->config_entry); - g->num_entry--; - kfree(c); - goto out_unlock; - } else if (action == POHMELFS_FLAGS_MODIFY) { - err = pohmelfs_modify_config(sc, ctl); - goto out_unlock; - } else { - err = -EEXIST; - goto out_unlock; - } - } - } - if (action == POHMELFS_FLAGS_DEL) { - err = -EBADMSG; - goto out_unlock; - } - - c = kzalloc(sizeof(struct pohmelfs_config), GFP_KERNEL); - if (!c) { - err = -ENOMEM; - goto out_unlock; - } - memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl)); - g->num_entry++; - - list_add_tail(&c->config_entry, &g->config_list); - - out_unlock: - mutex_unlock(&pohmelfs_config_lock); - if (pohmelfs_send_reply(err, 0, POHMELFS_NOINFO_ACK, msg, NULL)) - err = -ENOMEM; - - return err; -} - -static int pohmelfs_crypto_hash_init(struct pohmelfs_config_group *g, struct pohmelfs_crypto *c) -{ - char *algo = (char *)c->data; - u8 *key = (u8 *)(algo + c->strlen); - - if (g->hash_string) - return -EEXIST; - - g->hash_string = kstrdup(algo, GFP_KERNEL); - if (!g->hash_string) - return -ENOMEM; - g->hash_strlen = c->strlen; - g->hash_keysize = c->keysize; - - g->hash_key = kmemdup(key, c->keysize, GFP_KERNEL); - if (!g->hash_key) { - kfree(g->hash_string); - return -ENOMEM; - } - - return 0; -} - -static int pohmelfs_crypto_cipher_init(struct pohmelfs_config_group *g, struct pohmelfs_crypto *c) -{ - char *algo = (char *)c->data; - u8 *key = (u8 *)(algo + c->strlen); - - if (g->cipher_string) - return -EEXIST; - - g->cipher_string = kstrdup(algo, GFP_KERNEL); - if (!g->cipher_string) - return -ENOMEM; - g->cipher_strlen = c->strlen; - g->cipher_keysize = c->keysize; - - g->cipher_key = kmemdup(key, c->keysize, GFP_KERNEL); - if (!g->cipher_key) { - kfree(g->cipher_string); - return -ENOMEM; - } - - return 0; -} - -static int pohmelfs_cn_crypto(struct cn_msg *msg) -{ - struct pohmelfs_crypto *crypto = (struct pohmelfs_crypto *)msg->data; - struct pohmelfs_config_group *g; - int err = 0; - - dprintk("%s: idx: %u, strlen: %u, type: %u, keysize: %u, algo: %s.\n", - __func__, crypto->idx, crypto->strlen, crypto->type, - crypto->keysize, (char *)crypto->data); - - mutex_lock(&pohmelfs_config_lock); - g = pohmelfs_find_create_config_group(crypto->idx); - if (!g) { - err = -ENOMEM; - goto out_unlock; - } - - switch (crypto->type) { - case POHMELFS_CRYPTO_HASH: - err = pohmelfs_crypto_hash_init(g, crypto); - break; - case POHMELFS_CRYPTO_CIPHER: - err = pohmelfs_crypto_cipher_init(g, crypto); - break; - default: - err = -ENOTSUPP; - break; - } - -out_unlock: - mutex_unlock(&pohmelfs_config_lock); - if (pohmelfs_send_reply(err, 0, POHMELFS_NOINFO_ACK, msg, NULL)) - err = -ENOMEM; - - return err; -} - -static void pohmelfs_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - int err; - - if (!cap_raised(current_cap(), CAP_SYS_ADMIN)) - return; - - switch (msg->flags) { - case POHMELFS_FLAGS_ADD: - case POHMELFS_FLAGS_DEL: - case POHMELFS_FLAGS_MODIFY: - err = pohmelfs_cn_ctl(msg, msg->flags); - break; - case POHMELFS_FLAGS_FLUSH: - err = pohmelfs_cn_flush(msg); - break; - case POHMELFS_FLAGS_SHOW: - err = pohmelfs_cn_disp(msg); - break; - case POHMELFS_FLAGS_DUMP: - err = pohmelfs_cn_dump(msg); - break; - case POHMELFS_FLAGS_CRYPTO: - err = pohmelfs_cn_crypto(msg); - break; - default: - err = -ENOSYS; - break; - } -} - -int pohmelfs_config_check(struct pohmelfs_config *config, int idx) -{ - struct pohmelfs_ctl *ctl = &config->state.ctl; - struct pohmelfs_config *tmp; - int err = -ENOENT; - struct pohmelfs_ctl *sc; - struct pohmelfs_config_group *g; - - mutex_lock(&pohmelfs_config_lock); - - g = pohmelfs_find_config_group(ctl->idx); - if (g) { - list_for_each_entry(tmp, &g->config_list, config_entry) { - sc = &tmp->state.ctl; - - if (pohmelfs_config_eql(sc, ctl)) { - err = 0; - break; - } - } - } - - mutex_unlock(&pohmelfs_config_lock); - - return err; -} - -int __init pohmelfs_config_init(void) -{ - /* XXX remove (void *) cast when vanilla connector got synced */ - return cn_add_callback(&pohmelfs_cn_id, "pohmelfs", (void *)pohmelfs_cn_callback); -} - -void pohmelfs_config_exit(void) -{ - struct pohmelfs_config *c, *tmp; - struct pohmelfs_config_group *g, *gtmp; - - cn_del_callback(&pohmelfs_cn_id); - - mutex_lock(&pohmelfs_config_lock); - list_for_each_entry_safe(g, gtmp, &pohmelfs_config_list, group_entry) { - list_for_each_entry_safe(c, tmp, &g->config_list, config_entry) { - list_del(&c->config_entry); - kfree(c); - } - - list_del(&g->group_entry); - - kfree(g->hash_string); - - kfree(g->cipher_string); - - kfree(g); - } - mutex_unlock(&pohmelfs_config_lock); -} diff --git a/drivers/staging/pohmelfs/crypto.c b/drivers/staging/pohmelfs/crypto.c deleted file mode 100644 index ad92771dce57..000000000000 --- a/drivers/staging/pohmelfs/crypto.c +++ /dev/null @@ -1,878 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -#include "netfs.h" - -static struct crypto_hash *pohmelfs_init_hash(struct pohmelfs_sb *psb) -{ - int err; - struct crypto_hash *hash; - - hash = crypto_alloc_hash(psb->hash_string, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hash)) { - err = PTR_ERR(hash); - dprintk("%s: idx: %u: failed to allocate hash '%s', err: %d.\n", - __func__, psb->idx, psb->hash_string, err); - goto err_out_exit; - } - - psb->crypto_attached_size = crypto_hash_digestsize(hash); - - if (!psb->hash_keysize) - return hash; - - err = crypto_hash_setkey(hash, psb->hash_key, psb->hash_keysize); - if (err) { - dprintk("%s: idx: %u: failed to set key for hash '%s', err: %d.\n", - __func__, psb->idx, psb->hash_string, err); - goto err_out_free; - } - - return hash; - -err_out_free: - crypto_free_hash(hash); -err_out_exit: - return ERR_PTR(err); -} - -static struct crypto_ablkcipher *pohmelfs_init_cipher(struct pohmelfs_sb *psb) -{ - int err = -EINVAL; - struct crypto_ablkcipher *cipher; - - if (!psb->cipher_keysize) - goto err_out_exit; - - cipher = crypto_alloc_ablkcipher(psb->cipher_string, 0, 0); - if (IS_ERR(cipher)) { - err = PTR_ERR(cipher); - dprintk("%s: idx: %u: failed to allocate cipher '%s', err: %d.\n", - __func__, psb->idx, psb->cipher_string, err); - goto err_out_exit; - } - - crypto_ablkcipher_clear_flags(cipher, ~0); - - err = crypto_ablkcipher_setkey(cipher, psb->cipher_key, psb->cipher_keysize); - if (err) { - dprintk("%s: idx: %u: failed to set key for cipher '%s', err: %d.\n", - __func__, psb->idx, psb->cipher_string, err); - goto err_out_free; - } - - return cipher; - -err_out_free: - crypto_free_ablkcipher(cipher); -err_out_exit: - return ERR_PTR(err); -} - -int pohmelfs_crypto_engine_init(struct pohmelfs_crypto_engine *e, struct pohmelfs_sb *psb) -{ - int err; - - e->page_num = 0; - - e->size = PAGE_SIZE; - e->data = kmalloc(e->size, GFP_KERNEL); - if (!e->data) { - err = -ENOMEM; - goto err_out_exit; - } - - if (psb->hash_string) { - e->hash = pohmelfs_init_hash(psb); - if (IS_ERR(e->hash)) { - err = PTR_ERR(e->hash); - e->hash = NULL; - goto err_out_free; - } - } - - if (psb->cipher_string) { - e->cipher = pohmelfs_init_cipher(psb); - if (IS_ERR(e->cipher)) { - err = PTR_ERR(e->cipher); - e->cipher = NULL; - goto err_out_free_hash; - } - } - - return 0; - -err_out_free_hash: - crypto_free_hash(e->hash); -err_out_free: - kfree(e->data); -err_out_exit: - return err; -} - -void pohmelfs_crypto_engine_exit(struct pohmelfs_crypto_engine *e) -{ - crypto_free_hash(e->hash); - crypto_free_ablkcipher(e->cipher); - kfree(e->data); -} - -static void pohmelfs_crypto_complete(struct crypto_async_request *req, int err) -{ - struct pohmelfs_crypto_completion *c = req->data; - - if (err == -EINPROGRESS) - return; - - dprintk("%s: req: %p, err: %d.\n", __func__, req, err); - c->error = err; - complete(&c->complete); -} - -static int pohmelfs_crypto_process(struct ablkcipher_request *req, - struct scatterlist *sg_dst, struct scatterlist *sg_src, - void *iv, int enc, unsigned long timeout) -{ - struct pohmelfs_crypto_completion complete; - int err; - - init_completion(&complete.complete); - complete.error = -EINPROGRESS; - - ablkcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, - pohmelfs_crypto_complete, &complete); - - ablkcipher_request_set_crypt(req, sg_src, sg_dst, sg_src->length, iv); - - if (enc) - err = crypto_ablkcipher_encrypt(req); - else - err = crypto_ablkcipher_decrypt(req); - - switch (err) { - case -EINPROGRESS: - case -EBUSY: - err = wait_for_completion_interruptible_timeout(&complete.complete, - timeout); - if (!err) - err = -ETIMEDOUT; - else if (err > 0) - err = complete.error; - break; - default: - break; - } - - return err; -} - -int pohmelfs_crypto_process_input_data(struct pohmelfs_crypto_engine *e, u64 cmd_iv, - void *data, struct page *page, unsigned int size) -{ - int err; - struct scatterlist sg; - - if (!e->cipher && !e->hash) - return 0; - - dprintk("%s: eng: %p, iv: %llx, data: %p, page: %p/%lu, size: %u.\n", - __func__, e, cmd_iv, data, page, (page) ? page->index : 0, size); - - if (data) { - sg_init_one(&sg, data, size); - } else { - sg_init_table(&sg, 1); - sg_set_page(&sg, page, size, 0); - } - - if (e->cipher) { - struct ablkcipher_request *req = e->data + crypto_hash_digestsize(e->hash); - u8 iv[32]; - - memset(iv, 0, sizeof(iv)); - memcpy(iv, &cmd_iv, sizeof(cmd_iv)); - - ablkcipher_request_set_tfm(req, e->cipher); - - err = pohmelfs_crypto_process(req, &sg, &sg, iv, 0, e->timeout); - if (err) - goto err_out_exit; - } - - if (e->hash) { - struct hash_desc desc; - void *dst = e->data + e->size/2; - - desc.tfm = e->hash; - desc.flags = 0; - - err = crypto_hash_init(&desc); - if (err) - goto err_out_exit; - - err = crypto_hash_update(&desc, &sg, size); - if (err) - goto err_out_exit; - - err = crypto_hash_final(&desc, dst); - if (err) - goto err_out_exit; - - err = !!memcmp(dst, e->data, crypto_hash_digestsize(e->hash)); - - if (err) { -#ifdef CONFIG_POHMELFS_DEBUG - unsigned int i; - unsigned char *recv = e->data, *calc = dst; - - dprintk("%s: eng: %p, hash: %p, cipher: %p: iv : %llx, hash mismatch (recv/calc): ", - __func__, e, e->hash, e->cipher, cmd_iv); - for (i = 0; i < crypto_hash_digestsize(e->hash); ++i) { -#if 0 - dprintka("%02x ", recv[i]); - if (recv[i] != calc[i]) { - dprintka("| calc byte: %02x.\n", calc[i]); - break; - } -#else - dprintka("%02x/%02x ", recv[i], calc[i]); -#endif - } - dprintk("\n"); -#endif - goto err_out_exit; - } else { - dprintk("%s: eng: %p, hash: %p, cipher: %p: hashes matched.\n", - __func__, e, e->hash, e->cipher); - } - } - - dprintk("%s: eng: %p, size: %u, hash: %p, cipher: %p: completed.\n", - __func__, e, e->size, e->hash, e->cipher); - - return 0; - -err_out_exit: - dprintk("%s: eng: %p, hash: %p, cipher: %p: err: %d.\n", - __func__, e, e->hash, e->cipher, err); - return err; -} - -static int pohmelfs_trans_iter(struct netfs_trans *t, struct pohmelfs_crypto_engine *e, - int (*iterator) (struct pohmelfs_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - void *data = t->iovec.iov_base + sizeof(struct netfs_cmd) + t->psb->crypto_attached_size; - unsigned int size = t->iovec.iov_len - sizeof(struct netfs_cmd) - t->psb->crypto_attached_size; - struct netfs_cmd *cmd = data; - unsigned int sz, pages = t->attached_pages, i, csize, cmd_cmd, dpage_idx; - struct scatterlist sg_src, sg_dst; - int err; - - while (size) { - cmd = data; - cmd_cmd = __be16_to_cpu(cmd->cmd); - csize = __be32_to_cpu(cmd->size); - cmd->iv = __cpu_to_be64(e->iv); - - if (cmd_cmd == NETFS_READ_PAGES || cmd_cmd == NETFS_READ_PAGE) - csize = __be16_to_cpu(cmd->ext); - - sz = csize + __be16_to_cpu(cmd->cpad) + sizeof(struct netfs_cmd); - - dprintk("%s: size: %u, sz: %u, cmd_size: %u, cmd_cpad: %u.\n", - __func__, size, sz, __be32_to_cpu(cmd->size), __be16_to_cpu(cmd->cpad)); - - data += sz; - size -= sz; - - sg_init_one(&sg_src, cmd->data, sz - sizeof(struct netfs_cmd)); - sg_init_one(&sg_dst, cmd->data, sz - sizeof(struct netfs_cmd)); - - err = iterator(e, &sg_dst, &sg_src); - if (err) - return err; - } - - if (!pages) - return 0; - - dpage_idx = 0; - for (i = 0; i < t->page_num; ++i) { - struct page *page = t->pages[i]; - struct page *dpage = e->pages[dpage_idx]; - - if (!page) - continue; - - sg_init_table(&sg_src, 1); - sg_init_table(&sg_dst, 1); - sg_set_page(&sg_src, page, page_private(page), 0); - sg_set_page(&sg_dst, dpage, page_private(page), 0); - - err = iterator(e, &sg_dst, &sg_src); - if (err) - return err; - - pages--; - if (!pages) - break; - dpage_idx++; - } - - return 0; -} - -static int pohmelfs_encrypt_iterator(struct pohmelfs_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - struct ablkcipher_request *req = e->data; - u8 iv[32]; - - memset(iv, 0, sizeof(iv)); - - memcpy(iv, &e->iv, sizeof(e->iv)); - - return pohmelfs_crypto_process(req, sg_dst, sg_src, iv, 1, e->timeout); -} - -static int pohmelfs_encrypt(struct pohmelfs_crypto_thread *tc) -{ - struct netfs_trans *t = tc->trans; - struct pohmelfs_crypto_engine *e = &tc->eng; - struct ablkcipher_request *req = e->data; - - memset(req, 0, sizeof(struct ablkcipher_request)); - ablkcipher_request_set_tfm(req, e->cipher); - - e->iv = pohmelfs_gen_iv(t); - - return pohmelfs_trans_iter(t, e, pohmelfs_encrypt_iterator); -} - -static int pohmelfs_hash_iterator(struct pohmelfs_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - return crypto_hash_update(e->data, sg_src, sg_src->length); -} - -static int pohmelfs_hash(struct pohmelfs_crypto_thread *tc) -{ - struct pohmelfs_crypto_engine *e = &tc->eng; - struct hash_desc *desc = e->data; - unsigned char *dst = tc->trans->iovec.iov_base + sizeof(struct netfs_cmd); - int err; - - desc->tfm = e->hash; - desc->flags = 0; - - err = crypto_hash_init(desc); - if (err) - return err; - - err = pohmelfs_trans_iter(tc->trans, e, pohmelfs_hash_iterator); - if (err) - return err; - - err = crypto_hash_final(desc, dst); - if (err) - return err; - - { - unsigned int i; - dprintk("%s: ", __func__); - for (i = 0; i < tc->psb->crypto_attached_size; ++i) - dprintka("%02x ", dst[i]); - dprintka("\n"); - } - - return 0; -} - -static void pohmelfs_crypto_pages_free(struct pohmelfs_crypto_engine *e) -{ - unsigned int i; - - for (i = 0; i < e->page_num; ++i) - __free_page(e->pages[i]); - kfree(e->pages); -} - -static int pohmelfs_crypto_pages_alloc(struct pohmelfs_crypto_engine *e, struct pohmelfs_sb *psb) -{ - unsigned int i; - - e->pages = kmalloc(psb->trans_max_pages * sizeof(struct page *), GFP_KERNEL); - if (!e->pages) - return -ENOMEM; - - for (i = 0; i < psb->trans_max_pages; ++i) { - e->pages[i] = alloc_page(GFP_KERNEL); - if (!e->pages[i]) - break; - } - - e->page_num = i; - if (!e->page_num) - goto err_out_free; - - return 0; - -err_out_free: - kfree(e->pages); - return -ENOMEM; -} - -static void pohmelfs_sys_crypto_exit_one(struct pohmelfs_crypto_thread *t) -{ - struct pohmelfs_sb *psb = t->psb; - - if (t->thread) - kthread_stop(t->thread); - - mutex_lock(&psb->crypto_thread_lock); - list_del(&t->thread_entry); - psb->crypto_thread_num--; - mutex_unlock(&psb->crypto_thread_lock); - - pohmelfs_crypto_engine_exit(&t->eng); - pohmelfs_crypto_pages_free(&t->eng); - kfree(t); -} - -static int pohmelfs_crypto_finish(struct netfs_trans *t, struct pohmelfs_sb *psb, int err) -{ - struct netfs_cmd *cmd = t->iovec.iov_base; - netfs_convert_cmd(cmd); - - if (likely(!err)) - err = netfs_trans_finish_send(t, psb); - - t->result = err; - netfs_trans_put(t); - - return err; -} - -void pohmelfs_crypto_thread_make_ready(struct pohmelfs_crypto_thread *th) -{ - struct pohmelfs_sb *psb = th->psb; - - th->page = NULL; - th->trans = NULL; - - mutex_lock(&psb->crypto_thread_lock); - list_move_tail(&th->thread_entry, &psb->crypto_ready_list); - mutex_unlock(&psb->crypto_thread_lock); - wake_up(&psb->wait); -} - -static int pohmelfs_crypto_thread_trans(struct pohmelfs_crypto_thread *t) -{ - struct netfs_trans *trans; - int err = 0; - - trans = t->trans; - trans->eng = NULL; - - if (t->eng.hash) { - err = pohmelfs_hash(t); - if (err) - goto out_complete; - } - - if (t->eng.cipher) { - err = pohmelfs_encrypt(t); - if (err) - goto out_complete; - trans->eng = &t->eng; - } - -out_complete: - t->page = NULL; - t->trans = NULL; - - if (!trans->eng) - pohmelfs_crypto_thread_make_ready(t); - - pohmelfs_crypto_finish(trans, t->psb, err); - return err; -} - -static int pohmelfs_crypto_thread_page(struct pohmelfs_crypto_thread *t) -{ - struct pohmelfs_crypto_engine *e = &t->eng; - struct page *page = t->page; - int err; - - WARN_ON(!PageChecked(page)); - - err = pohmelfs_crypto_process_input_data(e, e->iv, NULL, page, t->size); - if (!err) - SetPageUptodate(page); - else - SetPageError(page); - unlock_page(page); - page_cache_release(page); - - pohmelfs_crypto_thread_make_ready(t); - - return err; -} - -static int pohmelfs_crypto_thread_func(void *data) -{ - struct pohmelfs_crypto_thread *t = data; - - while (!kthread_should_stop()) { - wait_event_interruptible(t->wait, kthread_should_stop() || - t->trans || t->page); - - if (kthread_should_stop()) - break; - - if (!t->trans && !t->page) - continue; - - dprintk("%s: thread: %p, trans: %p, page: %p.\n", - __func__, t, t->trans, t->page); - - if (t->trans) - pohmelfs_crypto_thread_trans(t); - else if (t->page) - pohmelfs_crypto_thread_page(t); - } - - return 0; -} - -static void pohmelfs_crypto_flush(struct pohmelfs_sb *psb, struct list_head *head) -{ - while (!list_empty(head)) { - struct pohmelfs_crypto_thread *t = NULL; - - mutex_lock(&psb->crypto_thread_lock); - if (!list_empty(head)) { - t = list_first_entry(head, struct pohmelfs_crypto_thread, thread_entry); - list_del_init(&t->thread_entry); - } - mutex_unlock(&psb->crypto_thread_lock); - - if (t) - pohmelfs_sys_crypto_exit_one(t); - } -} - -static void pohmelfs_sys_crypto_exit(struct pohmelfs_sb *psb) -{ - while (!list_empty(&psb->crypto_active_list) || !list_empty(&psb->crypto_ready_list)) { - dprintk("%s: crypto_thread_num: %u.\n", __func__, psb->crypto_thread_num); - pohmelfs_crypto_flush(psb, &psb->crypto_active_list); - pohmelfs_crypto_flush(psb, &psb->crypto_ready_list); - } -} - -static int pohmelfs_sys_crypto_init(struct pohmelfs_sb *psb) -{ - unsigned int i; - struct pohmelfs_crypto_thread *t; - struct pohmelfs_config *c; - struct netfs_state *st; - int err; - - list_for_each_entry(c, &psb->state_list, config_entry) { - st = &c->state; - - err = pohmelfs_crypto_engine_init(&st->eng, psb); - if (err) - goto err_out_exit; - - dprintk("%s: st: %p, eng: %p, hash: %p, cipher: %p.\n", - __func__, st, &st->eng, &st->eng.hash, &st->eng.cipher); - } - - for (i = 0; i < psb->crypto_thread_num; ++i) { - err = -ENOMEM; - t = kzalloc(sizeof(struct pohmelfs_crypto_thread), GFP_KERNEL); - if (!t) - goto err_out_free_state_engines; - - init_waitqueue_head(&t->wait); - - t->psb = psb; - t->trans = NULL; - t->eng.thread = t; - - err = pohmelfs_crypto_engine_init(&t->eng, psb); - if (err) - goto err_out_free_state_engines; - - err = pohmelfs_crypto_pages_alloc(&t->eng, psb); - if (err) - goto err_out_free; - - t->thread = kthread_run(pohmelfs_crypto_thread_func, t, - "pohmelfs-crypto-%d-%d", psb->idx, i); - if (IS_ERR(t->thread)) { - err = PTR_ERR(t->thread); - t->thread = NULL; - goto err_out_free; - } - - if (t->eng.cipher) - psb->crypto_align_size = crypto_ablkcipher_blocksize(t->eng.cipher); - - mutex_lock(&psb->crypto_thread_lock); - list_add_tail(&t->thread_entry, &psb->crypto_ready_list); - mutex_unlock(&psb->crypto_thread_lock); - } - - psb->crypto_thread_num = i; - return 0; - -err_out_free: - pohmelfs_sys_crypto_exit_one(t); -err_out_free_state_engines: - list_for_each_entry(c, &psb->state_list, config_entry) { - st = &c->state; - pohmelfs_crypto_engine_exit(&st->eng); - } -err_out_exit: - pohmelfs_sys_crypto_exit(psb); - return err; -} - -void pohmelfs_crypto_exit(struct pohmelfs_sb *psb) -{ - pohmelfs_sys_crypto_exit(psb); - - kfree(psb->hash_string); - kfree(psb->cipher_string); -} - -static int pohmelfs_crypt_init_complete(struct page **pages, unsigned int page_num, - void *private, int err) -{ - struct pohmelfs_sb *psb = private; - - psb->flags = -err; - dprintk("%s: err: %d.\n", __func__, err); - - wake_up(&psb->wait); - - return err; -} - -static int pohmelfs_crypto_init_handshake(struct pohmelfs_sb *psb) -{ - struct netfs_trans *t; - struct netfs_crypto_capabilities *cap; - struct netfs_cmd *cmd; - char *str; - int err = -ENOMEM, size; - - size = sizeof(struct netfs_crypto_capabilities) + - psb->cipher_strlen + psb->hash_strlen + 2; /* 0 bytes */ - - t = netfs_trans_alloc(psb, size, 0, 0); - if (!t) - goto err_out_exit; - - t->complete = pohmelfs_crypt_init_complete; - t->private = psb; - - cmd = netfs_trans_current(t); - cap = (struct netfs_crypto_capabilities *)(cmd + 1); - str = (char *)(cap + 1); - - cmd->cmd = NETFS_CAPABILITIES; - cmd->id = POHMELFS_CRYPTO_CAPABILITIES; - cmd->size = size; - cmd->start = 0; - cmd->ext = 0; - cmd->csize = 0; - - netfs_convert_cmd(cmd); - netfs_trans_update(cmd, t, size); - - cap->hash_strlen = psb->hash_strlen; - if (cap->hash_strlen) { - sprintf(str, "%s", psb->hash_string); - str += cap->hash_strlen; - } - - cap->cipher_strlen = psb->cipher_strlen; - cap->cipher_keysize = psb->cipher_keysize; - if (cap->cipher_strlen) - sprintf(str, "%s", psb->cipher_string); - - netfs_convert_crypto_capabilities(cap); - - psb->flags = ~0; - err = netfs_trans_finish(t, psb); - if (err) - goto err_out_exit; - - err = wait_event_interruptible_timeout(psb->wait, (psb->flags != ~0), - psb->wait_on_page_timeout); - if (!err) - err = -ETIMEDOUT; - else if (err > 0) - err = -psb->flags; - - if (!err) - psb->perform_crypto = 1; - psb->flags = 0; - - /* - * At this point NETFS_CAPABILITIES response command - * should setup superblock in a way, which is acceptable - * for both client and server, so if server refuses connection, - * it will send error in transaction response. - */ - - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - return err; -} - -int pohmelfs_crypto_init(struct pohmelfs_sb *psb) -{ - int err; - - if (!psb->cipher_string && !psb->hash_string) - return 0; - - err = pohmelfs_crypto_init_handshake(psb); - if (err) - return err; - - err = pohmelfs_sys_crypto_init(psb); - if (err) - return err; - - return 0; -} - -static int pohmelfs_crypto_thread_get(struct pohmelfs_sb *psb, - int (*action)(struct pohmelfs_crypto_thread *t, void *data), void *data) -{ - struct pohmelfs_crypto_thread *t = NULL; - int err; - - while (!t) { - err = wait_event_interruptible_timeout(psb->wait, - !list_empty(&psb->crypto_ready_list), - psb->wait_on_page_timeout); - - t = NULL; - err = 0; - mutex_lock(&psb->crypto_thread_lock); - if (!list_empty(&psb->crypto_ready_list)) { - t = list_entry(psb->crypto_ready_list.prev, - struct pohmelfs_crypto_thread, - thread_entry); - - list_move_tail(&t->thread_entry, - &psb->crypto_active_list); - - action(t, data); - wake_up(&t->wait); - - } - mutex_unlock(&psb->crypto_thread_lock); - } - - return err; -} - -static int pohmelfs_trans_crypt_action(struct pohmelfs_crypto_thread *t, void *data) -{ - struct netfs_trans *trans = data; - - netfs_trans_get(trans); - t->trans = trans; - - dprintk("%s: t: %p, gen: %u, thread: %p.\n", __func__, trans, trans->gen, t); - return 0; -} - -int pohmelfs_trans_crypt(struct netfs_trans *trans, struct pohmelfs_sb *psb) -{ - if ((!psb->hash_string && !psb->cipher_string) || !psb->perform_crypto) { - netfs_trans_get(trans); - return pohmelfs_crypto_finish(trans, psb, 0); - } - - return pohmelfs_crypto_thread_get(psb, pohmelfs_trans_crypt_action, trans); -} - -struct pohmelfs_crypto_input_action_data { - struct page *page; - struct pohmelfs_crypto_engine *e; - u64 iv; - unsigned int size; -}; - -static int pohmelfs_crypt_input_page_action(struct pohmelfs_crypto_thread *t, void *data) -{ - struct pohmelfs_crypto_input_action_data *act = data; - - memcpy(t->eng.data, act->e->data, t->psb->crypto_attached_size); - - t->size = act->size; - t->eng.iv = act->iv; - - t->page = act->page; - return 0; -} - -int pohmelfs_crypto_process_input_page(struct pohmelfs_crypto_engine *e, - struct page *page, unsigned int size, u64 iv) -{ - struct inode *inode = page->mapping->host; - struct pohmelfs_crypto_input_action_data act; - int err = -ENOENT; - - act.page = page; - act.e = e; - act.size = size; - act.iv = iv; - - err = pohmelfs_crypto_thread_get(POHMELFS_SB(inode->i_sb), - pohmelfs_crypt_input_page_action, &act); - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - SetPageUptodate(page); - page_cache_release(page); - - return err; -} diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c deleted file mode 100644 index 2ee4491b7136..000000000000 --- a/drivers/staging/pohmelfs/dir.c +++ /dev/null @@ -1,1102 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -#include "netfs.h" - -static int pohmelfs_cmp_hash(struct pohmelfs_name *n, u32 hash) -{ - if (n->hash > hash) - return -1; - if (n->hash < hash) - return 1; - - return 0; -} - -static struct pohmelfs_name *pohmelfs_search_hash_unprecise(struct pohmelfs_inode *pi, u32 hash) -{ - struct rb_node *n = pi->hash_root.rb_node; - struct pohmelfs_name *tmp = NULL; - int cmp; - - while (n) { - tmp = rb_entry(n, struct pohmelfs_name, hash_node); - - cmp = pohmelfs_cmp_hash(tmp, hash); - if (cmp < 0) - n = n->rb_left; - else if (cmp > 0) - n = n->rb_right; - else - break; - - } - - return tmp; -} - -struct pohmelfs_name *pohmelfs_search_hash(struct pohmelfs_inode *pi, u32 hash) -{ - struct pohmelfs_name *tmp; - - tmp = pohmelfs_search_hash_unprecise(pi, hash); - if (tmp && (tmp->hash == hash)) - return tmp; - - return NULL; -} - -static void __pohmelfs_name_del(struct pohmelfs_inode *parent, struct pohmelfs_name *node) -{ - rb_erase(&node->hash_node, &parent->hash_root); -} - -/* - * Remove name cache entry from its caches and free it. - */ -static void pohmelfs_name_free(struct pohmelfs_inode *parent, struct pohmelfs_name *node) -{ - __pohmelfs_name_del(parent, node); - list_del(&node->sync_create_entry); - kfree(node); -} - -static struct pohmelfs_name *pohmelfs_insert_hash(struct pohmelfs_inode *pi, - struct pohmelfs_name *new) -{ - struct rb_node **n = &pi->hash_root.rb_node, *parent = NULL; - struct pohmelfs_name *ret = NULL, *tmp; - int cmp; - - while (*n) { - parent = *n; - - tmp = rb_entry(parent, struct pohmelfs_name, hash_node); - - cmp = pohmelfs_cmp_hash(tmp, new->hash); - if (cmp < 0) - n = &parent->rb_left; - else if (cmp > 0) - n = &parent->rb_right; - else { - ret = tmp; - break; - } - } - - if (ret) { - printk("%s: exist: parent: %llu, ino: %llu, hash: %x, len: %u, data: '%s', " - "new: ino: %llu, hash: %x, len: %u, data: '%s'.\n", - __func__, pi->ino, - ret->ino, ret->hash, ret->len, ret->data, - new->ino, new->hash, new->len, new->data); - ret->ino = new->ino; - return ret; - } - - rb_link_node(&new->hash_node, parent, n); - rb_insert_color(&new->hash_node, &pi->hash_root); - - return NULL; -} - -/* - * Free name cache for given inode. - */ -void pohmelfs_free_names(struct pohmelfs_inode *parent) -{ - struct rb_node *rb_node; - struct pohmelfs_name *n; - - for (rb_node = rb_first(&parent->hash_root); rb_node;) { - n = rb_entry(rb_node, struct pohmelfs_name, hash_node); - rb_node = rb_next(rb_node); - - pohmelfs_name_free(parent, n); - } -} - -static void pohmelfs_fix_offset(struct pohmelfs_inode *parent, struct pohmelfs_name *node) -{ - parent->total_len -= node->len; -} - -/* - * Free name cache entry helper. - */ -void pohmelfs_name_del(struct pohmelfs_inode *parent, struct pohmelfs_name *node) -{ - pohmelfs_fix_offset(parent, node); - pohmelfs_name_free(parent, node); -} - -/* - * Insert new name cache entry into all hash cache. - */ -static int pohmelfs_insert_name(struct pohmelfs_inode *parent, struct pohmelfs_name *n) -{ - struct pohmelfs_name *name; - - name = pohmelfs_insert_hash(parent, n); - if (name) - return -EEXIST; - - parent->total_len += n->len; - list_add_tail(&n->sync_create_entry, &parent->sync_create_list); - - return 0; -} - -/* - * Allocate new name cache entry. - */ -static struct pohmelfs_name *pohmelfs_name_alloc(unsigned int len) -{ - struct pohmelfs_name *n; - - n = kzalloc(sizeof(struct pohmelfs_name) + len, GFP_KERNEL); - if (!n) - return NULL; - - INIT_LIST_HEAD(&n->sync_create_entry); - - n->data = (char *)(n+1); - - return n; -} - -/* - * Add new name entry into directory's cache. - */ -static int pohmelfs_add_dir(struct pohmelfs_sb *psb, struct pohmelfs_inode *parent, - struct pohmelfs_inode *npi, struct qstr *str, unsigned int mode, int link) -{ - int err = -ENOMEM; - struct pohmelfs_name *n; - - n = pohmelfs_name_alloc(str->len + 1); - if (!n) - goto err_out_exit; - - n->ino = npi->ino; - n->mode = mode; - n->len = str->len; - n->hash = str->hash; - sprintf(n->data, "%s", str->name); - - mutex_lock(&parent->offset_lock); - err = pohmelfs_insert_name(parent, n); - mutex_unlock(&parent->offset_lock); - - if (err) { - if (err != -EEXIST) - goto err_out_free; - kfree(n); - } - - return 0; - -err_out_free: - kfree(n); -err_out_exit: - return err; -} - -/* - * Create new inode for given parameters (name, inode info, parent). - * This does not create object on the server, it will be synced there during writeback. - */ -struct pohmelfs_inode *pohmelfs_new_inode(struct pohmelfs_sb *psb, - struct pohmelfs_inode *parent, struct qstr *str, - struct netfs_inode_info *info, int link) -{ - struct inode *new = NULL; - struct pohmelfs_inode *npi; - int err = -EEXIST; - - dprintk("%s: creating inode: parent: %llu, ino: %llu, str: %p.\n", - __func__, (parent) ? parent->ino : 0, info->ino, str); - - err = -ENOMEM; - new = iget_locked(psb->sb, info->ino); - if (!new) - goto err_out_exit; - - npi = POHMELFS_I(new); - npi->ino = info->ino; - err = 0; - - if (new->i_state & I_NEW) { - dprintk("%s: filling VFS inode: %lu/%llu.\n", - __func__, new->i_ino, info->ino); - pohmelfs_fill_inode(new, info); - - if (S_ISDIR(info->mode)) { - struct qstr s; - - s.name = "."; - s.len = 1; - s.hash = jhash(s.name, s.len, 0); - - err = pohmelfs_add_dir(psb, npi, npi, &s, info->mode, 0); - if (err) - goto err_out_put; - - s.name = ".."; - s.len = 2; - s.hash = jhash(s.name, s.len, 0); - - err = pohmelfs_add_dir(psb, npi, (parent) ? parent : npi, &s, - (parent) ? parent->vfs_inode.i_mode : npi->vfs_inode.i_mode, 0); - if (err) - goto err_out_put; - } - } - - if (str) { - if (parent) { - err = pohmelfs_add_dir(psb, parent, npi, str, info->mode, link); - - dprintk("%s: %s inserted name: '%s', new_offset: %llu, ino: %llu, parent: %llu.\n", - __func__, (err) ? "unsuccessfully" : "successfully", - str->name, parent->total_len, info->ino, parent->ino); - - if (err && err != -EEXIST) - goto err_out_put; - } - } - - if (new->i_state & I_NEW) { - if (parent) - mark_inode_dirty(&parent->vfs_inode); - mark_inode_dirty(new); - } - - set_bit(NETFS_INODE_OWNED, &npi->state); - npi->lock_type = POHMELFS_WRITE_LOCK; - unlock_new_inode(new); - - return npi; - -err_out_put: - printk("%s: putting inode: %p, npi: %p, error: %d.\n", __func__, new, npi, err); - iput(new); -err_out_exit: - return ERR_PTR(err); -} - -static int pohmelfs_remote_sync_complete(struct page **pages, unsigned int page_num, - void *private, int err) -{ - struct pohmelfs_inode *pi = private; - struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb); - - dprintk("%s: ino: %llu, err: %d.\n", __func__, pi->ino, err); - - if (err) - pi->error = err; - wake_up(&psb->wait); - pohmelfs_put_inode(pi); - - return err; -} - -/* - * Receive directory content from the server. - * This should be only done for objects, which were not created locally, - * and which were not synced previously. - */ -static int pohmelfs_sync_remote_dir(struct pohmelfs_inode *pi) -{ - struct inode *inode = &pi->vfs_inode; - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - long ret = psb->wait_on_page_timeout; - int err; - - dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n", - __func__, pi->ino, pi->state, test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state)); - - if (test_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &pi->state)) - return 0; - - if (!igrab(inode)) { - err = -ENOENT; - goto err_out_exit; - } - - err = pohmelfs_meta_command(pi, NETFS_READDIR, NETFS_TRANS_SINGLE_DST, - pohmelfs_remote_sync_complete, pi, 0); - if (err) - goto err_out_exit; - - pi->error = 0; - ret = wait_event_interruptible_timeout(psb->wait, - test_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &pi->state) || pi->error, ret); - dprintk("%s: awake dir: %llu, ret: %ld, err: %d.\n", __func__, pi->ino, ret, pi->error); - if (ret <= 0) { - err = ret; - if (!err) - err = -ETIMEDOUT; - goto err_out_exit; - } - - if (pi->error) - return pi->error; - - return 0; - -err_out_exit: - clear_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state); - - return err; -} - -static int pohmelfs_dir_open(struct inode *inode, struct file *file) -{ - file->private_data = NULL; - return 0; -} - -/* - * VFS readdir callback. Syncs directory content from server if needed, - * and provides direntry info to the userspace. - */ -static int pohmelfs_readdir(struct file *file, void *dirent, filldir_t filldir) -{ - struct inode *inode = file->f_path.dentry->d_inode; - struct pohmelfs_inode *pi = POHMELFS_I(inode); - struct pohmelfs_name *n; - struct rb_node *rb_node; - int err = 0, mode; - u64 len; - - dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n", - __func__, pi->ino, (u64)file->f_pos, - (unsigned long)file->private_data); -#if 0 - err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK); - if (err) - return err; -#endif - err = pohmelfs_sync_remote_dir(pi); - if (err) - return err; - - if (file->private_data && (file->private_data == (void *)(unsigned long)file->f_pos)) - return 0; - - mutex_lock(&pi->offset_lock); - n = pohmelfs_search_hash_unprecise(pi, (unsigned long)file->private_data); - - while (n) { - mode = (n->mode >> 12) & 15; - - dprintk("%s: offset: %llu, parent ino: %llu, name: '%s', len: %u, ino: %llu, " - "mode: %o/%o, fpos: %llu, hash: %08x.\n", - __func__, file->f_pos, pi->ino, n->data, n->len, - n->ino, n->mode, mode, file->f_pos, n->hash); - - file->private_data = (void *)(unsigned long)n->hash; - - len = n->len; - err = filldir(dirent, n->data, n->len, file->f_pos, n->ino, mode); - - if (err < 0) { - dprintk("%s: err: %d.\n", __func__, err); - err = 0; - break; - } - - file->f_pos += len; - - rb_node = rb_next(&n->hash_node); - - if (!rb_node || (rb_node == &n->hash_node)) { - file->private_data = (void *)(unsigned long)file->f_pos; - break; - } - - n = rb_entry(rb_node, struct pohmelfs_name, hash_node); - } - mutex_unlock(&pi->offset_lock); - - return err; -} - -static loff_t pohmelfs_dir_lseek(struct file *file, loff_t offset, int origin) -{ - file->f_pos = offset; - file->private_data = NULL; - return offset; -} - -const struct file_operations pohmelfs_dir_fops = { - .open = pohmelfs_dir_open, - .read = generic_read_dir, - .llseek = pohmelfs_dir_lseek, - .readdir = pohmelfs_readdir, -}; - -/* - * Lookup single object on server. - */ -static int pohmelfs_lookup_single(struct pohmelfs_inode *parent, - struct qstr *str, u64 ino) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(parent->vfs_inode.i_sb); - long ret = msecs_to_jiffies(5000); - int err; - - set_bit(NETFS_COMMAND_PENDING, &parent->state); - err = pohmelfs_meta_command_data(parent, parent->ino, NETFS_LOOKUP, - (char *)str->name, NETFS_TRANS_SINGLE_DST, NULL, NULL, ino); - if (err) - goto err_out_exit; - - err = 0; - ret = wait_event_interruptible_timeout(psb->wait, - !test_bit(NETFS_COMMAND_PENDING, &parent->state), ret); - if (ret <= 0) { - err = ret; - if (!err) - err = -ETIMEDOUT; - } - - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - clear_bit(NETFS_COMMAND_PENDING, &parent->state); - - printk("%s: failed: parent: %llu, ino: %llu, name: '%s', err: %d.\n", - __func__, parent->ino, ino, str->name, err); - - return err; -} - -/* - * VFS lookup callback. - * We first try to get inode number from local name cache, if we have one, - * then inode can be found in inode cache. If there is no inode or no object in - * local cache, try to lookup it on server. This only should be done for directories, - * which were not created locally, otherwise remote server does not know about dir at all, - * so no need to try to know that. - */ -struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd) -{ - struct pohmelfs_inode *parent = POHMELFS_I(dir); - struct pohmelfs_name *n; - struct inode *inode = NULL; - unsigned long ino = 0; - int err, lock_type = POHMELFS_READ_LOCK, need_lock = 1; - struct qstr str = dentry->d_name; - - if ((nd->intent.open.flags & O_ACCMODE) != O_RDONLY) - lock_type = POHMELFS_WRITE_LOCK; - - if (test_bit(NETFS_INODE_OWNED, &parent->state)) { - if (lock_type == parent->lock_type) - need_lock = 0; - if ((lock_type == POHMELFS_READ_LOCK) && (parent->lock_type == POHMELFS_WRITE_LOCK)) - need_lock = 0; - } - - if ((lock_type == POHMELFS_READ_LOCK) && !test_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &parent->state)) - need_lock = 1; - - str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0); - - mutex_lock(&parent->offset_lock); - n = pohmelfs_search_hash(parent, str.hash); - if (n) - ino = n->ino; - mutex_unlock(&parent->offset_lock); - - dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n", - __func__, ino, inode, str.name, str.hash, parent->state, need_lock); - - if (ino) { - inode = ilookup(dir->i_sb, ino); - if (inode) - goto out; - } - - dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n", - __func__, dir, parent->ino, - str.name, str.len, parent->state, ino); - - if (!ino) { - if (!need_lock) - goto out; - } - - err = pohmelfs_data_lock(parent, 0, ~0, lock_type); - if (err) - goto out; - - err = pohmelfs_lookup_single(parent, &str, ino); - if (err) - goto out; - - if (!ino) { - mutex_lock(&parent->offset_lock); - n = pohmelfs_search_hash(parent, str.hash); - if (n) - ino = n->ino; - mutex_unlock(&parent->offset_lock); - } - - if (ino) { - inode = ilookup(dir->i_sb, ino); - dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n", - __func__, ino, inode, str.name, str.hash); - if (!inode) { - dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n", - __func__, ino, str.name, str.hash); - /* return NULL; */ - return ERR_PTR(-EACCES); - } - } else { - printk("%s: No inode number : name: '%s', hash: %x.\n", - __func__, str.name, str.hash); - } -out: - return d_splice_alias(inode, dentry); -} - -/* - * Create new object in local cache. Object will be synced to server - * during writeback for given inode. - */ -struct pohmelfs_inode *pohmelfs_create_entry_local(struct pohmelfs_sb *psb, - struct pohmelfs_inode *parent, struct qstr *str, u64 start, umode_t mode) -{ - struct pohmelfs_inode *npi; - int err = -ENOMEM; - struct netfs_inode_info info; - - dprintk("%s: name: '%s', mode: %ho, start: %llu.\n", - __func__, str->name, mode, start); - - info.mode = mode; - info.ino = start; - - if (!start) - info.ino = pohmelfs_new_ino(psb); - - info.nlink = S_ISDIR(mode) ? 2 : 1; - info.uid = current_fsuid(); - info.gid = current_fsgid(); - info.size = 0; - info.blocksize = 512; - info.blocks = 0; - info.rdev = 0; - info.version = 0; - - npi = pohmelfs_new_inode(psb, parent, str, &info, !!start); - if (IS_ERR(npi)) { - err = PTR_ERR(npi); - goto err_out_unlock; - } - - return npi; - -err_out_unlock: - dprintk("%s: err: %d.\n", __func__, err); - return ERR_PTR(err); -} - -/* - * Create local object and bind it to dentry. - */ -static int pohmelfs_create_entry(struct inode *dir, struct dentry *dentry, - u64 start, umode_t mode) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(dir->i_sb); - struct pohmelfs_inode *npi, *parent; - struct qstr str = dentry->d_name; - int err; - - parent = POHMELFS_I(dir); - - err = pohmelfs_data_lock(parent, 0, ~0, POHMELFS_WRITE_LOCK); - if (err) - return err; - - str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0); - - npi = pohmelfs_create_entry_local(psb, parent, &str, start, mode); - if (IS_ERR(npi)) - return PTR_ERR(npi); - - d_instantiate(dentry, &npi->vfs_inode); - - dprintk("%s: parent: %llu, inode: %llu, name: '%s', parent_nlink: %d, nlink: %d.\n", - __func__, parent->ino, npi->ino, dentry->d_name.name, - (signed)dir->i_nlink, (signed)npi->vfs_inode.i_nlink); - - return 0; -} - -/* - * VFS create and mkdir callbacks. - */ -static int pohmelfs_create(struct inode *dir, struct dentry *dentry, umode_t mode, - struct nameidata *nd) -{ - return pohmelfs_create_entry(dir, dentry, 0, mode); -} - -static int pohmelfs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode) -{ - int err; - - inode_inc_link_count(dir); - err = pohmelfs_create_entry(dir, dentry, 0, mode | S_IFDIR); - if (err) - inode_dec_link_count(dir); - - return err; -} - -static int pohmelfs_remove_entry(struct inode *dir, struct dentry *dentry) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(dir->i_sb); - struct inode *inode = dentry->d_inode; - struct pohmelfs_inode *parent = POHMELFS_I(dir), *pi = POHMELFS_I(inode); - struct pohmelfs_name *n; - int err = -ENOENT; - struct qstr str = dentry->d_name; - - err = pohmelfs_data_lock(parent, 0, ~0, POHMELFS_WRITE_LOCK); - if (err) - return err; - - str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0); - - dprintk("%s: dir_ino: %llu, inode: %llu, name: '%s', nlink: %d.\n", - __func__, parent->ino, pi->ino, - str.name, (signed)inode->i_nlink); - - BUG_ON(!inode); - - mutex_lock(&parent->offset_lock); - n = pohmelfs_search_hash(parent, str.hash); - if (n) { - pohmelfs_fix_offset(parent, n); - if (test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state)) - pohmelfs_remove_child(pi, n); - - pohmelfs_name_free(parent, n); - err = 0; - } - mutex_unlock(&parent->offset_lock); - - if (!err) { - psb->avail_size += inode->i_size; - - pohmelfs_inode_del_inode(psb, pi); - - mark_inode_dirty(dir); - - inode->i_ctime = dir->i_ctime; - if (inode->i_nlink) - inode_dec_link_count(inode); - } - - return err; -} - -/* - * Unlink and rmdir VFS callbacks. - */ -static int pohmelfs_unlink(struct inode *dir, struct dentry *dentry) -{ - return pohmelfs_remove_entry(dir, dentry); -} - -static int pohmelfs_rmdir(struct inode *dir, struct dentry *dentry) -{ - int err; - struct inode *inode = dentry->d_inode; - - dprintk("%s: parent: %llu, inode: %llu, name: '%s', parent_nlink: %d, nlink: %d.\n", - __func__, POHMELFS_I(dir)->ino, POHMELFS_I(inode)->ino, - dentry->d_name.name, (signed)dir->i_nlink, (signed)inode->i_nlink); - - err = pohmelfs_remove_entry(dir, dentry); - if (!err) { - inode_dec_link_count(dir); - inode_dec_link_count(inode); - } - - return err; -} - -/* - * Link creation is synchronous. - * I'm lazy. - * Earth is somewhat round. - */ -static int pohmelfs_create_link(struct pohmelfs_inode *parent, struct qstr *obj, - struct pohmelfs_inode *target, struct qstr *tstr) -{ - struct super_block *sb = parent->vfs_inode.i_sb; - struct pohmelfs_sb *psb = POHMELFS_SB(sb); - struct netfs_cmd *cmd; - struct netfs_trans *t; - void *data; - int err, parent_len, target_len = 0, cur_len, path_size = 0; - - err = pohmelfs_data_lock(parent, 0, ~0, POHMELFS_WRITE_LOCK); - if (err) - return err; - - err = sb->s_op->write_inode(&parent->vfs_inode, 0); - if (err) - goto err_out_exit; - - if (tstr) - target_len = tstr->len; - - parent_len = pohmelfs_path_length(parent); - if (target) - target_len += pohmelfs_path_length(target); - - if (parent_len < 0) { - err = parent_len; - goto err_out_exit; - } - - if (target_len < 0) { - err = target_len; - goto err_out_exit; - } - - t = netfs_trans_alloc(psb, parent_len + target_len + obj->len + 2, 0, 0); - if (!t) { - err = -ENOMEM; - goto err_out_exit; - } - cur_len = netfs_trans_cur_len(t); - - cmd = netfs_trans_current(t); - if (IS_ERR(cmd)) { - err = PTR_ERR(cmd); - goto err_out_free; - } - - data = (void *)(cmd + 1); - cur_len -= sizeof(struct netfs_cmd); - - err = pohmelfs_construct_path_string(parent, data, parent_len); - if (err > 0) { - /* Do not place null-byte before the slash */ - path_size = err - 1; - cur_len -= path_size; - - err = snprintf(data + path_size, cur_len, "/%s|", obj->name); - - path_size += err; - cur_len -= err; - - cmd->ext = path_size - 1; /* No | symbol */ - - if (target) { - err = pohmelfs_construct_path_string(target, data + path_size, target_len); - if (err > 0) { - path_size += err; - cur_len -= err; - } - } - } - - if (err < 0) - goto err_out_free; - - cmd->start = 0; - - if (!target && tstr) { - if (tstr->len > cur_len - 1) { - err = -ENAMETOOLONG; - goto err_out_free; - } - - err = snprintf(data + path_size, cur_len, "%s", tstr->name) + 1; /* 0-byte */ - path_size += err; - cur_len -= err; - cmd->start = 1; - } - - dprintk("%s: parent: %llu, obj: '%s', target_inode: %llu, target_str: '%s', full: '%s'.\n", - __func__, parent->ino, obj->name, (target) ? target->ino : 0, (tstr) ? tstr->name : NULL, - (char *)data); - - cmd->cmd = NETFS_LINK; - cmd->size = path_size; - cmd->id = parent->ino; - - netfs_convert_cmd(cmd); - - netfs_trans_update(cmd, t, path_size); - - err = netfs_trans_finish(t, psb); - if (err) - goto err_out_exit; - - return 0; - -err_out_free: - t->result = err; - netfs_trans_put(t); -err_out_exit: - return err; -} - -/* - * VFS hard and soft link callbacks. - */ -static int pohmelfs_link(struct dentry *old_dentry, struct inode *dir, - struct dentry *dentry) -{ - struct inode *inode = old_dentry->d_inode; - struct pohmelfs_inode *pi = POHMELFS_I(inode); - int err; - struct qstr str = dentry->d_name; - - str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0); - - err = inode->i_sb->s_op->write_inode(inode, 0); - if (err) - return err; - - err = pohmelfs_create_link(POHMELFS_I(dir), &str, pi, NULL); - if (err) - return err; - - return pohmelfs_create_entry(dir, dentry, pi->ino, inode->i_mode); -} - -static int pohmelfs_symlink(struct inode *dir, struct dentry *dentry, const char *symname) -{ - struct qstr sym_str; - struct qstr str = dentry->d_name; - struct inode *inode; - int err; - - str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0); - - sym_str.name = symname; - sym_str.len = strlen(symname); - - err = pohmelfs_create_link(POHMELFS_I(dir), &str, NULL, &sym_str); - if (err) - goto err_out_exit; - - err = pohmelfs_create_entry(dir, dentry, 0, S_IFLNK | S_IRWXU | S_IRWXG | S_IRWXO); - if (err) - goto err_out_exit; - - inode = dentry->d_inode; - - err = page_symlink(inode, symname, sym_str.len + 1); - if (err) - goto err_out_put; - - return 0; - -err_out_put: - iput(inode); -err_out_exit: - return err; -} - -static int pohmelfs_send_rename(struct pohmelfs_inode *pi, struct pohmelfs_inode *parent, - struct qstr *str) -{ - int path_len, err, total_len = 0, inode_len, parent_len; - char *path; - struct netfs_trans *t; - struct netfs_cmd *cmd; - struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb); - - parent_len = pohmelfs_path_length(parent); - inode_len = pohmelfs_path_length(pi); - - if (parent_len < 0 || inode_len < 0) - return -EINVAL; - - path_len = parent_len + inode_len + str->len + 3; - - t = netfs_trans_alloc(psb, path_len, 0, 0); - if (!t) - return -ENOMEM; - - cmd = netfs_trans_current(t); - path = (char *)(cmd + 1); - - err = pohmelfs_construct_path_string(pi, path, inode_len); - if (err < 0) - goto err_out_unlock; - - cmd->ext = err; - - path += err; - total_len += err; - path_len -= err; - - *path = '|'; - path++; - total_len++; - path_len--; - - err = pohmelfs_construct_path_string(parent, path, parent_len); - if (err < 0) - goto err_out_unlock; - - /* - * Do not place a null-byte before the final slash and the name. - */ - err--; - path += err; - total_len += err; - path_len -= err; - - err = snprintf(path, path_len - 1, "/%s", str->name); - - total_len += err + 1; /* 0 symbol */ - path_len -= err + 1; - - cmd->cmd = NETFS_RENAME; - cmd->id = pi->ino; - cmd->start = parent->ino; - cmd->size = total_len; - - netfs_convert_cmd(cmd); - - netfs_trans_update(cmd, t, total_len); - - return netfs_trans_finish(t, psb); - -err_out_unlock: - netfs_trans_free(t); - return err; -} - -static int pohmelfs_rename(struct inode *old_dir, struct dentry *old_dentry, - struct inode *new_dir, struct dentry *new_dentry) -{ - struct inode *inode = old_dentry->d_inode; - struct pohmelfs_inode *old_parent, *pi, *new_parent; - struct qstr str = new_dentry->d_name; - struct pohmelfs_name *n; - unsigned int old_hash; - int err = -ENOENT; - - pi = POHMELFS_I(inode); - old_parent = POHMELFS_I(old_dir); - - if (new_dir) - new_dir->i_sb->s_op->write_inode(new_dir, 0); - - old_hash = jhash(old_dentry->d_name.name, old_dentry->d_name.len, 0); - str.hash = jhash(new_dentry->d_name.name, new_dentry->d_name.len, 0); - - str.len = new_dentry->d_name.len; - str.name = new_dentry->d_name.name; - str.hash = jhash(new_dentry->d_name.name, new_dentry->d_name.len, 0); - - if (new_dir) { - new_parent = POHMELFS_I(new_dir); - err = -ENOTEMPTY; - - if (S_ISDIR(inode->i_mode) && - new_parent->total_len <= 3) - goto err_out_exit; - } else { - new_parent = old_parent; - } - - dprintk("%s: ino: %llu, parent: %llu, name: '%s' -> parent: %llu, name: '%s', i_size: %llu.\n", - __func__, pi->ino, old_parent->ino, old_dentry->d_name.name, - new_parent->ino, new_dentry->d_name.name, inode->i_size); - - if (test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state) && - test_bit(NETFS_INODE_OWNED, &pi->state)) { - err = pohmelfs_send_rename(pi, new_parent, &str); - if (err) - goto err_out_exit; - } - - n = pohmelfs_name_alloc(str.len + 1); - if (!n) - goto err_out_exit; - - mutex_lock(&new_parent->offset_lock); - n->ino = pi->ino; - n->mode = inode->i_mode; - n->len = str.len; - n->hash = str.hash; - sprintf(n->data, "%s", str.name); - - err = pohmelfs_insert_name(new_parent, n); - mutex_unlock(&new_parent->offset_lock); - - if (err) - goto err_out_exit; - - mutex_lock(&old_parent->offset_lock); - n = pohmelfs_search_hash(old_parent, old_hash); - if (n) - pohmelfs_name_del(old_parent, n); - mutex_unlock(&old_parent->offset_lock); - - mark_inode_dirty(inode); - mark_inode_dirty(&new_parent->vfs_inode); - - WARN_ON_ONCE(list_empty(&inode->i_dentry)); - - return 0; - -err_out_exit: - - clear_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state); - - return err; -} - -/* - * POHMELFS directory inode operations. - */ -const struct inode_operations pohmelfs_dir_inode_ops = { - .link = pohmelfs_link, - .symlink = pohmelfs_symlink, - .unlink = pohmelfs_unlink, - .mkdir = pohmelfs_mkdir, - .rmdir = pohmelfs_rmdir, - .create = pohmelfs_create, - .lookup = pohmelfs_lookup, - .setattr = pohmelfs_setattr, - .rename = pohmelfs_rename, -}; diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c deleted file mode 100644 index 807e3f324113..000000000000 --- a/drivers/staging/pohmelfs/inode.c +++ /dev/null @@ -1,2055 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "netfs.h" - -#define POHMELFS_MAGIC_NUM 0x504f482e - -static struct kmem_cache *pohmelfs_inode_cache; -static atomic_t psb_bdi_num = ATOMIC_INIT(0); - -/* - * Removes inode from all trees, drops local name cache and removes all queued - * requests for object removal. - */ -void pohmelfs_inode_del_inode(struct pohmelfs_sb *psb, struct pohmelfs_inode *pi) -{ - mutex_lock(&pi->offset_lock); - pohmelfs_free_names(pi); - mutex_unlock(&pi->offset_lock); - - dprintk("%s: deleted stuff in ino: %llu.\n", __func__, pi->ino); -} - -/* - * Sync inode to server. - * Returns zero in success and negative error value otherwise. - * It will gather path to root directory into structures containing - * creation mode, permissions and names, so that the whole path - * to given inode could be created using only single network command. - */ -int pohmelfs_write_inode_create(struct inode *inode, struct netfs_trans *trans) -{ - struct pohmelfs_inode *pi = POHMELFS_I(inode); - int err = -ENOMEM, size; - struct netfs_cmd *cmd; - void *data; - int cur_len = netfs_trans_cur_len(trans); - - if (unlikely(cur_len < 0)) - return -ETOOSMALL; - - cmd = netfs_trans_current(trans); - cur_len -= sizeof(struct netfs_cmd); - - data = (void *)(cmd + 1); - - err = pohmelfs_construct_path_string(pi, data, cur_len); - if (err < 0) - goto err_out_exit; - - size = err; - - cmd->start = i_size_read(inode); - cmd->cmd = NETFS_CREATE; - cmd->size = size; - cmd->id = pi->ino; - cmd->ext = inode->i_mode; - - netfs_convert_cmd(cmd); - - netfs_trans_update(cmd, trans, size); - - return 0; - -err_out_exit: - printk("%s: completed ino: %llu, err: %d.\n", __func__, pi->ino, err); - return err; -} - -static int pohmelfs_write_trans_complete(struct page **pages, unsigned int page_num, - void *private, int err) -{ - unsigned i; - - dprintk("%s: pages: %lu-%lu, page_num: %u, err: %d.\n", - __func__, pages[0]->index, pages[page_num-1]->index, - page_num, err); - - for (i = 0; i < page_num; i++) { - struct page *page = pages[i]; - - if (!page) - continue; - - end_page_writeback(page); - - if (err < 0) { - SetPageError(page); - set_page_dirty(page); - } - - unlock_page(page); - page_cache_release(page); - - /* dprintk("%s: %3u/%u: page: %p.\n", __func__, i, page_num, page); */ - } - return err; -} - -static int pohmelfs_inode_has_dirty_pages(struct address_space *mapping, pgoff_t index) -{ - int ret; - struct page *page; - - rcu_read_lock(); - ret = radix_tree_gang_lookup_tag(&mapping->page_tree, - (void **)&page, index, 1, PAGECACHE_TAG_DIRTY); - rcu_read_unlock(); - return ret; -} - -static int pohmelfs_writepages(struct address_space *mapping, struct writeback_control *wbc) -{ - struct inode *inode = mapping->host; - struct pohmelfs_inode *pi = POHMELFS_I(inode); - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - int err = 0; - int done = 0; - int nr_pages; - pgoff_t index; - pgoff_t end; /* Inclusive */ - int scanned = 0; - int range_whole = 0; - - if (wbc->range_cyclic) { - index = mapping->writeback_index; /* Start from prev offset */ - end = -1; - } else { - index = wbc->range_start >> PAGE_CACHE_SHIFT; - end = wbc->range_end >> PAGE_CACHE_SHIFT; - if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) - range_whole = 1; - scanned = 1; - } -retry: - while (!done && (index <= end)) { - unsigned int i = min(end - index, (pgoff_t)psb->trans_max_pages); - int path_len; - struct netfs_trans *trans; - - err = pohmelfs_inode_has_dirty_pages(mapping, index); - if (!err) - break; - - err = pohmelfs_path_length(pi); - if (err < 0) - break; - - path_len = err; - - if (path_len <= 2) { - err = -ENOENT; - break; - } - - trans = netfs_trans_alloc(psb, path_len, 0, i); - if (!trans) { - err = -ENOMEM; - break; - } - trans->complete = &pohmelfs_write_trans_complete; - - trans->page_num = nr_pages = find_get_pages_tag(mapping, &index, - PAGECACHE_TAG_DIRTY, trans->page_num, - trans->pages); - - dprintk("%s: t: %p, nr_pages: %u, end: %lu, index: %lu, max: %u.\n", - __func__, trans, nr_pages, end, index, trans->page_num); - - if (!nr_pages) - goto err_out_reset; - - err = pohmelfs_write_inode_create(inode, trans); - if (err) - goto err_out_reset; - - err = 0; - scanned = 1; - - for (i = 0; i < trans->page_num; i++) { - struct page *page = trans->pages[i]; - - lock_page(page); - - if (unlikely(page->mapping != mapping)) - goto out_continue; - - if (!wbc->range_cyclic && page->index > end) { - done = 1; - goto out_continue; - } - - if (wbc->sync_mode != WB_SYNC_NONE) - wait_on_page_writeback(page); - - if (PageWriteback(page) || - !clear_page_dirty_for_io(page)) { - dprintk("%s: not clear for io page: %p, writeback: %d.\n", - __func__, page, PageWriteback(page)); - goto out_continue; - } - - set_page_writeback(page); - - trans->attached_size += page_private(page); - trans->attached_pages++; -#if 0 - dprintk("%s: %u/%u added trans: %p, gen: %u, page: %p, [High: %d], size: %lu, idx: %lu.\n", - __func__, i, trans->page_num, trans, trans->gen, page, - !!PageHighMem(page), page_private(page), page->index); -#endif - wbc->nr_to_write--; - - if (wbc->nr_to_write <= 0) - done = 1; - - continue; -out_continue: - unlock_page(page); - trans->pages[i] = NULL; - } - - err = netfs_trans_finish(trans, psb); - if (err) - break; - - continue; - -err_out_reset: - trans->result = err; - netfs_trans_reset(trans); - netfs_trans_put(trans); - break; - } - - if (!scanned && !done) { - /* - * We hit the last page and there is more work to be done: wrap - * back to the start of the file - */ - scanned = 1; - index = 0; - goto retry; - } - - if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) - mapping->writeback_index = index; - - return err; -} - -/* - * Inode writeback creation completion callback. - * Only invoked for just created inodes, which do not have pages attached, - * like dirs and empty files. - */ -static int pohmelfs_write_inode_complete(struct page **pages, unsigned int page_num, - void *private, int err) -{ - struct inode *inode = private; - struct pohmelfs_inode *pi = POHMELFS_I(inode); - - if (inode) { - if (err) { - mark_inode_dirty(inode); - clear_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state); - } else { - set_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state); - } - - pohmelfs_put_inode(pi); - } - - return err; -} - -int pohmelfs_write_create_inode(struct pohmelfs_inode *pi) -{ - struct netfs_trans *t; - struct inode *inode = &pi->vfs_inode; - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - int err; - - if (test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state)) - return 0; - - dprintk("%s: started ino: %llu.\n", __func__, pi->ino); - - err = pohmelfs_path_length(pi); - if (err < 0) - goto err_out_exit; - - t = netfs_trans_alloc(psb, err + 1, 0, 0); - if (!t) { - err = -ENOMEM; - goto err_out_exit; - } - t->complete = pohmelfs_write_inode_complete; - t->private = igrab(inode); - if (!t->private) { - err = -ENOENT; - goto err_out_put; - } - - err = pohmelfs_write_inode_create(inode, t); - if (err) - goto err_out_put; - - netfs_trans_finish(t, POHMELFS_SB(inode->i_sb)); - - return 0; - -err_out_put: - t->result = err; - netfs_trans_put(t); -err_out_exit: - return err; -} - -/* - * Sync all not-yet-created children in given directory to the server. - */ -static int pohmelfs_write_inode_create_children(struct inode *inode) -{ - struct pohmelfs_inode *parent = POHMELFS_I(inode); - struct super_block *sb = inode->i_sb; - struct pohmelfs_name *n; - - while (!list_empty(&parent->sync_create_list)) { - n = NULL; - mutex_lock(&parent->offset_lock); - if (!list_empty(&parent->sync_create_list)) { - n = list_first_entry(&parent->sync_create_list, - struct pohmelfs_name, sync_create_entry); - list_del_init(&n->sync_create_entry); - } - mutex_unlock(&parent->offset_lock); - - if (!n) - break; - - inode = ilookup(sb, n->ino); - - dprintk("%s: parent: %llu, ino: %llu, inode: %p.\n", - __func__, parent->ino, n->ino, inode); - - if (inode && (inode->i_state & I_DIRTY)) { - struct pohmelfs_inode *pi = POHMELFS_I(inode); - pohmelfs_write_create_inode(pi); - /* pohmelfs_meta_command(pi, NETFS_INODE_INFO, 0, NULL, NULL, 0); */ - iput(inode); - } - } - - return 0; -} - -/* - * Removes given child from given inode on server. - */ -int pohmelfs_remove_child(struct pohmelfs_inode *pi, struct pohmelfs_name *n) -{ - return pohmelfs_meta_command_data(pi, pi->ino, NETFS_REMOVE, NULL, 0, NULL, NULL, 0); -} - -/* - * Writeback for given inode. - */ -static int pohmelfs_write_inode(struct inode *inode, - struct writeback_control *wbc) -{ - struct pohmelfs_inode *pi = POHMELFS_I(inode); - - pohmelfs_write_create_inode(pi); - pohmelfs_write_inode_create_children(inode); - - return 0; -} - -/* - * It is not exported, sorry... - */ -static inline wait_queue_head_t *page_waitqueue(struct page *page) -{ - const struct zone *zone = page_zone(page); - - return &zone->wait_table[hash_ptr(page, zone->wait_table_bits)]; -} - -static int pohmelfs_wait_on_page_locked(struct page *page) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(page->mapping->host->i_sb); - long ret = psb->wait_on_page_timeout; - DEFINE_WAIT_BIT(wait, &page->flags, PG_locked); - int err = 0; - - if (!PageLocked(page)) - return 0; - - for (;;) { - prepare_to_wait(page_waitqueue(page), - &wait.wait, TASK_INTERRUPTIBLE); - - dprintk("%s: page: %p, locked: %d, uptodate: %d, error: %d, flags: %lx.\n", - __func__, page, PageLocked(page), PageUptodate(page), - PageError(page), page->flags); - - if (!PageLocked(page)) - break; - - if (!signal_pending(current)) { - ret = schedule_timeout(ret); - if (!ret) - break; - continue; - } - ret = -ERESTARTSYS; - break; - } - finish_wait(page_waitqueue(page), &wait.wait); - - if (!ret) - err = -ETIMEDOUT; - - - if (!err) - SetPageUptodate(page); - - if (err) - printk("%s: page: %p, uptodate: %d, locked: %d, err: %d.\n", - __func__, page, PageUptodate(page), PageLocked(page), err); - - return err; -} - -static int pohmelfs_read_page_complete(struct page **pages, unsigned int page_num, - void *private, int err) -{ - struct page *page = private; - - if (PageChecked(page)) - return err; - - if (err < 0) { - dprintk("%s: page: %p, err: %d.\n", __func__, page, err); - SetPageError(page); - } - - unlock_page(page); - - return err; -} - -/* - * Read a page from remote server. - * Function will wait until page is unlocked. - */ -static int pohmelfs_readpage(struct file *file, struct page *page) -{ - struct inode *inode = page->mapping->host; - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - struct pohmelfs_inode *pi = POHMELFS_I(inode); - struct netfs_trans *t; - struct netfs_cmd *cmd; - int err, path_len; - void *data; - u64 isize; - - err = pohmelfs_data_lock(pi, page->index << PAGE_CACHE_SHIFT, - PAGE_SIZE, POHMELFS_READ_LOCK); - if (err) - goto err_out_exit; - - isize = i_size_read(inode); - if (isize <= page->index << PAGE_CACHE_SHIFT) { - SetPageUptodate(page); - unlock_page(page); - return 0; - } - - path_len = pohmelfs_path_length(pi); - if (path_len < 0) { - err = path_len; - goto err_out_exit; - } - - t = netfs_trans_alloc(psb, path_len, NETFS_TRANS_SINGLE_DST, 0); - if (!t) { - err = -ENOMEM; - goto err_out_exit; - } - - t->complete = pohmelfs_read_page_complete; - t->private = page; - - cmd = netfs_trans_current(t); - data = (void *)(cmd + 1); - - err = pohmelfs_construct_path_string(pi, data, path_len); - if (err < 0) - goto err_out_free; - - path_len = err; - - cmd->id = pi->ino; - cmd->start = page->index; - cmd->start <<= PAGE_CACHE_SHIFT; - cmd->size = PAGE_CACHE_SIZE + path_len; - cmd->cmd = NETFS_READ_PAGE; - cmd->ext = path_len; - - dprintk("%s: path: '%s', page: %p, ino: %llu, start: %llu, size: %lu.\n", - __func__, (char *)data, page, pi->ino, cmd->start, PAGE_CACHE_SIZE); - - netfs_convert_cmd(cmd); - netfs_trans_update(cmd, t, path_len); - - err = netfs_trans_finish(t, psb); - if (err) - goto err_out_return; - - return pohmelfs_wait_on_page_locked(page); - -err_out_free: - t->result = err; - netfs_trans_put(t); -err_out_exit: - SetPageError(page); - if (PageLocked(page)) - unlock_page(page); -err_out_return: - printk("%s: page: %p, start: %lu, size: %lu, err: %d.\n", - __func__, page, page->index << PAGE_CACHE_SHIFT, PAGE_CACHE_SIZE, err); - - return err; -} - -/* - * Write begin/end magic. - * Allocates a page and writes inode if it was not synced to server before. - */ -static int pohmelfs_write_begin(struct file *file, struct address_space *mapping, - loff_t pos, unsigned len, unsigned flags, - struct page **pagep, void **fsdata) -{ - struct inode *inode = mapping->host; - struct page *page; - pgoff_t index; - unsigned start, end; - int err; - - *pagep = NULL; - - index = pos >> PAGE_CACHE_SHIFT; - start = pos & (PAGE_CACHE_SIZE - 1); - end = start + len; - - page = grab_cache_page(mapping, index); -#if 0 - dprintk("%s: page: %p pos: %llu, len: %u, index: %lu, start: %u, end: %u, uptodate: %d.\n", - __func__, page, pos, len, index, start, end, PageUptodate(page)); -#endif - if (!page) { - err = -ENOMEM; - goto err_out_exit; - } - - while (!PageUptodate(page)) { - if (start && test_bit(NETFS_INODE_REMOTE_SYNCED, &POHMELFS_I(inode)->state)) { - err = pohmelfs_readpage(file, page); - if (err) - goto err_out_exit; - - lock_page(page); - continue; - } - - if (len != PAGE_CACHE_SIZE) { - void *kaddr = kmap_atomic(page, KM_USER0); - - memset(kaddr + start, 0, PAGE_CACHE_SIZE - start); - flush_dcache_page(page); - kunmap_atomic(kaddr, KM_USER0); - } - SetPageUptodate(page); - } - - set_page_private(page, end); - - *pagep = page; - - return 0; - -err_out_exit: - page_cache_release(page); - *pagep = NULL; - - return err; -} - -static int pohmelfs_write_end(struct file *file, struct address_space *mapping, - loff_t pos, unsigned len, unsigned copied, - struct page *page, void *fsdata) -{ - struct inode *inode = mapping->host; - - if (copied != len) { - unsigned from = pos & (PAGE_CACHE_SIZE - 1); - void *kaddr = kmap_atomic(page, KM_USER0); - - memset(kaddr + from + copied, 0, len - copied); - flush_dcache_page(page); - kunmap_atomic(kaddr, KM_USER0); - } - - SetPageUptodate(page); - set_page_dirty(page); -#if 0 - dprintk("%s: page: %p [U: %d, D: %d, L: %d], pos: %llu, len: %u, copied: %u.\n", - __func__, page, - PageUptodate(page), PageDirty(page), PageLocked(page), - pos, len, copied); -#endif - flush_dcache_page(page); - - unlock_page(page); - page_cache_release(page); - - if (pos + copied > inode->i_size) { - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - - psb->avail_size -= pos + copied - inode->i_size; - - i_size_write(inode, pos + copied); - } - - return copied; -} - -static int pohmelfs_readpages_trans_complete(struct page **__pages, unsigned int page_num, - void *private, int err) -{ - struct pohmelfs_inode *pi = private; - unsigned int i, num; - struct page **pages, *page = (struct page *)__pages; - loff_t index = page->index; - - pages = kzalloc(sizeof(void *) * page_num, GFP_NOIO); - if (!pages) - return -ENOMEM; - - num = find_get_pages_contig(pi->vfs_inode.i_mapping, index, page_num, pages); - if (num <= 0) { - err = num; - goto err_out_free; - } - - for (i = 0; i < num; ++i) { - page = pages[i]; - - if (err) - printk("%s: %u/%u: page: %p, index: %lu, uptodate: %d, locked: %d, err: %d.\n", - __func__, i, num, page, page->index, - PageUptodate(page), PageLocked(page), err); - - if (!PageChecked(page)) { - if (err < 0) - SetPageError(page); - unlock_page(page); - } - page_cache_release(page); - page_cache_release(page); - } - -err_out_free: - kfree(pages); - return err; -} - -static int pohmelfs_send_readpages(struct pohmelfs_inode *pi, struct page *first, unsigned int num) -{ - struct netfs_trans *t; - struct netfs_cmd *cmd; - struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb); - int err, path_len; - void *data; - - err = pohmelfs_data_lock(pi, first->index << PAGE_CACHE_SHIFT, - num * PAGE_SIZE, POHMELFS_READ_LOCK); - if (err) - goto err_out_exit; - - path_len = pohmelfs_path_length(pi); - if (path_len < 0) { - err = path_len; - goto err_out_exit; - } - - t = netfs_trans_alloc(psb, path_len, NETFS_TRANS_SINGLE_DST, 0); - if (!t) { - err = -ENOMEM; - goto err_out_exit; - } - - cmd = netfs_trans_current(t); - data = (void *)(cmd + 1); - - t->complete = pohmelfs_readpages_trans_complete; - t->private = pi; - t->page_num = num; - t->pages = (struct page **)first; - - err = pohmelfs_construct_path_string(pi, data, path_len); - if (err < 0) - goto err_out_put; - - path_len = err; - - cmd->cmd = NETFS_READ_PAGES; - cmd->start = first->index; - cmd->start <<= PAGE_CACHE_SHIFT; - cmd->size = (num << 8 | PAGE_CACHE_SHIFT); - cmd->id = pi->ino; - cmd->ext = path_len; - - dprintk("%s: t: %p, gen: %u, path: '%s', path_len: %u, " - "start: %lu, num: %u.\n", - __func__, t, t->gen, (char *)data, path_len, - first->index, num); - - netfs_convert_cmd(cmd); - netfs_trans_update(cmd, t, path_len); - - return netfs_trans_finish(t, psb); - -err_out_put: - netfs_trans_free(t); -err_out_exit: - pohmelfs_readpages_trans_complete((struct page **)first, num, pi, err); - return err; -} - -#define list_to_page(head) (list_entry((head)->prev, struct page, lru)) - -static int pohmelfs_readpages(struct file *file, struct address_space *mapping, - struct list_head *pages, unsigned nr_pages) -{ - unsigned int page_idx, num = 0; - struct page *page = NULL, *first = NULL; - - for (page_idx = 0; page_idx < nr_pages; page_idx++) { - page = list_to_page(pages); - - prefetchw(&page->flags); - list_del(&page->lru); - - if (!add_to_page_cache_lru(page, mapping, - page->index, GFP_KERNEL)) { - - if (!num) { - num = 1; - first = page; - continue; - } - - dprintk("%s: added to lru page: %p, page_index: %lu, first_index: %lu.\n", - __func__, page, page->index, first->index); - - if (unlikely(first->index + num != page->index) || (num > 500)) { - pohmelfs_send_readpages(POHMELFS_I(mapping->host), - first, num); - first = page; - num = 0; - } - - num++; - } - } - pohmelfs_send_readpages(POHMELFS_I(mapping->host), first, num); - - /* - * This will be sync read, so when last page is processed, - * all previous are alerady unlocked and ready to be used. - */ - return 0; -} - -/* - * Small address space operations for POHMELFS. - */ -const struct address_space_operations pohmelfs_aops = { - .readpage = pohmelfs_readpage, - .readpages = pohmelfs_readpages, - .writepages = pohmelfs_writepages, - .write_begin = pohmelfs_write_begin, - .write_end = pohmelfs_write_end, - .set_page_dirty = __set_page_dirty_nobuffers, -}; - -static void pohmelfs_i_callback(struct rcu_head *head) -{ - struct inode *inode = container_of(head, struct inode, i_rcu); - kmem_cache_free(pohmelfs_inode_cache, POHMELFS_I(inode)); -} - -/* - * ->destroy_inode() callback. Deletes inode from the caches - * and frees private data. - */ -static void pohmelfs_destroy_inode(struct inode *inode) -{ - struct super_block *sb = inode->i_sb; - struct pohmelfs_sb *psb = POHMELFS_SB(sb); - struct pohmelfs_inode *pi = POHMELFS_I(inode); - - /* pohmelfs_data_unlock(pi, 0, inode->i_size, POHMELFS_READ_LOCK); */ - - pohmelfs_inode_del_inode(psb, pi); - - dprintk("%s: pi: %p, inode: %p, ino: %llu.\n", - __func__, pi, &pi->vfs_inode, pi->ino); - atomic_long_dec(&psb->total_inodes); - call_rcu(&inode->i_rcu, pohmelfs_i_callback); -} - -/* - * ->alloc_inode() callback. Allocates inode and initializes private data. - */ -static struct inode *pohmelfs_alloc_inode(struct super_block *sb) -{ - struct pohmelfs_inode *pi; - - pi = kmem_cache_alloc(pohmelfs_inode_cache, GFP_NOIO); - if (!pi) - return NULL; - - pi->hash_root = RB_ROOT; - mutex_init(&pi->offset_lock); - - INIT_LIST_HEAD(&pi->sync_create_list); - - INIT_LIST_HEAD(&pi->inode_entry); - - pi->lock_type = 0; - pi->state = 0; - pi->total_len = 0; - pi->drop_count = 0; - - dprintk("%s: pi: %p, inode: %p.\n", __func__, pi, &pi->vfs_inode); - - atomic_long_inc(&POHMELFS_SB(sb)->total_inodes); - - return &pi->vfs_inode; -} - -/* - * We want fsync() to work on POHMELFS. - */ -static int pohmelfs_fsync(struct file *file, loff_t start, loff_t end, int datasync) -{ - struct inode *inode = file->f_mapping->host; - int err = filemap_write_and_wait_range(inode->i_mapping, start, end); - if (!err) { - mutex_lock(&inode->i_mutex); - err = sync_inode_metadata(inode, 1); - mutex_unlock(&inode->i_mutex); - } - return err; -} - -ssize_t pohmelfs_write(struct file *file, const char __user *buf, - size_t len, loff_t *ppos) -{ - struct address_space *mapping = file->f_mapping; - struct inode *inode = mapping->host; - struct pohmelfs_inode *pi = POHMELFS_I(inode); - struct iovec iov = { .iov_base = (void __user *)buf, .iov_len = len }; - struct kiocb kiocb; - ssize_t ret; - loff_t pos = *ppos; - - init_sync_kiocb(&kiocb, file); - kiocb.ki_pos = pos; - kiocb.ki_left = len; - - dprintk("%s: len: %zu, pos: %llu.\n", __func__, len, pos); - - mutex_lock(&inode->i_mutex); - ret = pohmelfs_data_lock(pi, pos, len, POHMELFS_WRITE_LOCK); - if (ret) - goto err_out_unlock; - - ret = __generic_file_aio_write(&kiocb, &iov, 1, &kiocb.ki_pos); - *ppos = kiocb.ki_pos; - - mutex_unlock(&inode->i_mutex); - WARN_ON(ret < 0); - - if (ret > 0) { - ssize_t err; - - err = generic_write_sync(file, pos, ret); - if (err < 0) - ret = err; - WARN_ON(ret < 0); - } - - return ret; - -err_out_unlock: - mutex_unlock(&inode->i_mutex); - return ret; -} - -static const struct file_operations pohmelfs_file_ops = { - .open = generic_file_open, - .fsync = pohmelfs_fsync, - - .llseek = generic_file_llseek, - - .read = do_sync_read, - .aio_read = generic_file_aio_read, - - .mmap = generic_file_mmap, - - .splice_read = generic_file_splice_read, - .splice_write = generic_file_splice_write, - - .write = pohmelfs_write, - .aio_write = generic_file_aio_write, -}; - -const struct inode_operations pohmelfs_symlink_inode_operations = { - .readlink = generic_readlink, - .follow_link = page_follow_link_light, - .put_link = page_put_link, -}; - -int pohmelfs_setattr_raw(struct inode *inode, struct iattr *attr) -{ - int err; - - err = inode_change_ok(inode, attr); - if (err) { - dprintk("%s: ino: %llu, inode changes are not allowed.\n", __func__, POHMELFS_I(inode)->ino); - goto err_out_exit; - } - - if ((attr->ia_valid & ATTR_SIZE) && - attr->ia_size != i_size_read(inode)) { - err = vmtruncate(inode, attr->ia_size); - if (err) { - dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino); - goto err_out_exit; - } - } - - setattr_copy(inode, attr); - mark_inode_dirty(inode); - - dprintk("%s: ino: %llu, mode: %o -> %o, uid: %u -> %u, gid: %u -> %u, size: %llu -> %llu.\n", - __func__, POHMELFS_I(inode)->ino, inode->i_mode, attr->ia_mode, - inode->i_uid, attr->ia_uid, inode->i_gid, attr->ia_gid, inode->i_size, attr->ia_size); - - return 0; - -err_out_exit: - return err; -} - -int pohmelfs_setattr(struct dentry *dentry, struct iattr *attr) -{ - struct inode *inode = dentry->d_inode; - struct pohmelfs_inode *pi = POHMELFS_I(inode); - int err; - - err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_WRITE_LOCK); - if (err) - goto err_out_exit; - - err = security_inode_setattr(dentry, attr); - if (err) - goto err_out_exit; - - err = pohmelfs_setattr_raw(inode, attr); - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - return err; -} - -static int pohmelfs_send_xattr_req(struct pohmelfs_inode *pi, u64 id, u64 start, - const char *name, const void *value, size_t attrsize, int command) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb); - int err, path_len, namelen = strlen(name) + 1; /* 0-byte */ - struct netfs_trans *t; - struct netfs_cmd *cmd; - void *data; - - dprintk("%s: id: %llu, start: %llu, name: '%s', attrsize: %zu, cmd: %d.\n", - __func__, id, start, name, attrsize, command); - - path_len = pohmelfs_path_length(pi); - if (path_len < 0) { - err = path_len; - goto err_out_exit; - } - - t = netfs_trans_alloc(psb, namelen + path_len + attrsize, 0, 0); - if (!t) { - err = -ENOMEM; - goto err_out_exit; - } - - cmd = netfs_trans_current(t); - data = cmd + 1; - - path_len = pohmelfs_construct_path_string(pi, data, path_len); - if (path_len < 0) { - err = path_len; - goto err_out_put; - } - data += path_len; - - /* - * 'name' is a NUL-terminated string already and - * 'namelen' includes 0-byte. - */ - memcpy(data, name, namelen); - data += namelen; - - memcpy(data, value, attrsize); - - cmd->cmd = command; - cmd->id = id; - cmd->start = start; - cmd->size = attrsize + namelen + path_len; - cmd->ext = path_len; - cmd->csize = 0; - cmd->cpad = 0; - - netfs_convert_cmd(cmd); - netfs_trans_update(cmd, t, namelen + path_len + attrsize); - - return netfs_trans_finish(t, psb); - -err_out_put: - t->result = err; - netfs_trans_put(t); -err_out_exit: - return err; -} - -static int pohmelfs_setxattr(struct dentry *dentry, const char *name, - const void *value, size_t attrsize, int flags) -{ - struct inode *inode = dentry->d_inode; - struct pohmelfs_inode *pi = POHMELFS_I(inode); - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - - if (!(psb->state_flags & POHMELFS_FLAGS_XATTR)) - return -EOPNOTSUPP; - - return pohmelfs_send_xattr_req(pi, flags, attrsize, name, - value, attrsize, NETFS_XATTR_SET); -} - -static ssize_t pohmelfs_getxattr(struct dentry *dentry, const char *name, - void *value, size_t attrsize) -{ - struct inode *inode = dentry->d_inode; - struct pohmelfs_inode *pi = POHMELFS_I(inode); - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - struct pohmelfs_mcache *m; - int err; - long timeout = psb->mcache_timeout; - - if (!(psb->state_flags & POHMELFS_FLAGS_XATTR)) - return -EOPNOTSUPP; - - m = pohmelfs_mcache_alloc(psb, 0, attrsize, value); - if (IS_ERR(m)) - return PTR_ERR(m); - - dprintk("%s: ino: %llu, name: '%s', size: %zu.\n", - __func__, pi->ino, name, attrsize); - - err = pohmelfs_send_xattr_req(pi, m->gen, attrsize, name, value, 0, NETFS_XATTR_GET); - if (err) - goto err_out_put; - - do { - err = wait_for_completion_timeout(&m->complete, timeout); - if (err) { - err = m->err; - break; - } - - /* - * This loop is a bit ugly, since it waits until reference counter - * hits 1 and then puts the object here. Main goal is to prevent race with - * the network thread, when it can start processing the given request, i.e. - * increase its reference counter but yet not complete it, while - * we will exit from ->getxattr() with timeout, and although request - * will not be freed (its reference counter was increased by network - * thread), data pointer provided by user may be released, so we will - * overwrite an already freed area in the network thread. - * - * Now after timeout we remove request from the cache, so it can not be - * found by network thread, and wait for its reference counter to hit 1, - * i.e. if network thread already started to process this request, we wait - * for it to finish, and then free object locally. If reference counter is - * already 1, i.e. request is not used by anyone else, we can free it without - * problem. - */ - err = -ETIMEDOUT; - timeout = HZ; - - pohmelfs_mcache_remove_locked(psb, m); - } while (atomic_read(&m->refcnt) != 1); - - pohmelfs_mcache_put(psb, m); - - dprintk("%s: ino: %llu, err: %d.\n", __func__, pi->ino, err); - - return err; - -err_out_put: - pohmelfs_mcache_put(psb, m); - return err; -} - -static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) -{ - struct inode *inode = dentry->d_inode; -#if 0 - struct pohmelfs_inode *pi = POHMELFS_I(inode); - int err; - - err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK); - if (err) - return err; - dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n", - __func__, pi->ino, inode->i_mode, inode->i_uid, - inode->i_gid, inode->i_size); -#endif - - generic_fillattr(inode, stat); - return 0; -} - -const struct inode_operations pohmelfs_file_inode_operations = { - .setattr = pohmelfs_setattr, - .getattr = pohmelfs_getattr, - .setxattr = pohmelfs_setxattr, - .getxattr = pohmelfs_getxattr, -}; - -/* - * Fill inode data: mode, size, operation callbacks and so on... - */ -void pohmelfs_fill_inode(struct inode *inode, struct netfs_inode_info *info) -{ - inode->i_mode = info->mode; - set_nlink(inode, info->nlink); - inode->i_uid = info->uid; - inode->i_gid = info->gid; - inode->i_blocks = info->blocks; - inode->i_rdev = info->rdev; - inode->i_size = info->size; - inode->i_version = info->version; - inode->i_blkbits = ffs(info->blocksize); - - dprintk("%s: inode: %p, num: %lu/%llu inode is regular: %d, dir: %d, link: %d, mode: %o, size: %llu.\n", - __func__, inode, inode->i_ino, info->ino, - S_ISREG(inode->i_mode), S_ISDIR(inode->i_mode), - S_ISLNK(inode->i_mode), inode->i_mode, inode->i_size); - - inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC; - - /* - * i_mapping is a pointer to i_data during inode initialization. - */ - inode->i_data.a_ops = &pohmelfs_aops; - - if (S_ISREG(inode->i_mode)) { - inode->i_fop = &pohmelfs_file_ops; - inode->i_op = &pohmelfs_file_inode_operations; - } else if (S_ISDIR(inode->i_mode)) { - inode->i_fop = &pohmelfs_dir_fops; - inode->i_op = &pohmelfs_dir_inode_ops; - } else if (S_ISLNK(inode->i_mode)) { - inode->i_op = &pohmelfs_symlink_inode_operations; - inode->i_fop = &pohmelfs_file_ops; - } else { - inode->i_fop = &generic_ro_fops; - } -} - -static int pohmelfs_drop_inode(struct inode *inode) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - struct pohmelfs_inode *pi = POHMELFS_I(inode); - - spin_lock(&psb->ino_lock); - list_del_init(&pi->inode_entry); - spin_unlock(&psb->ino_lock); - - return generic_drop_inode(inode); -} - -static struct pohmelfs_inode *pohmelfs_get_inode_from_list(struct pohmelfs_sb *psb, - struct list_head *head, unsigned int *count) -{ - struct pohmelfs_inode *pi = NULL; - - spin_lock(&psb->ino_lock); - if (!list_empty(head)) { - pi = list_entry(head->next, struct pohmelfs_inode, - inode_entry); - list_del_init(&pi->inode_entry); - *count = pi->drop_count; - pi->drop_count = 0; - } - spin_unlock(&psb->ino_lock); - - return pi; -} - -static void pohmelfs_flush_transactions(struct pohmelfs_sb *psb) -{ - struct pohmelfs_config *c; - - mutex_lock(&psb->state_lock); - list_for_each_entry(c, &psb->state_list, config_entry) { - pohmelfs_state_flush_transactions(&c->state); - } - mutex_unlock(&psb->state_lock); -} - -/* - * ->put_super() callback. Invoked before superblock is destroyed, - * so it has to clean all private data. - */ -static void pohmelfs_put_super(struct super_block *sb) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(sb); - struct pohmelfs_inode *pi; - unsigned int count = 0; - unsigned int in_drop_list = 0; - struct inode *inode, *tmp; - - dprintk("%s.\n", __func__); - - /* - * Kill pending transactions, which could affect inodes in-flight. - */ - pohmelfs_flush_transactions(psb); - - while ((pi = pohmelfs_get_inode_from_list(psb, &psb->drop_list, &count))) { - inode = &pi->vfs_inode; - - dprintk("%s: ino: %llu, pi: %p, inode: %p, count: %u.\n", - __func__, pi->ino, pi, inode, count); - - if (atomic_read(&inode->i_count) != count) { - printk("%s: ino: %llu, pi: %p, inode: %p, count: %u, i_count: %d.\n", - __func__, pi->ino, pi, inode, count, - atomic_read(&inode->i_count)); - count = atomic_read(&inode->i_count); - in_drop_list++; - } - - while (count--) - iput(&pi->vfs_inode); - } - - list_for_each_entry_safe(inode, tmp, &sb->s_inodes, i_sb_list) { - pi = POHMELFS_I(inode); - - dprintk("%s: ino: %llu, pi: %p, inode: %p, i_count: %u.\n", - __func__, pi->ino, pi, inode, atomic_read(&inode->i_count)); - - /* - * These are special inodes, they were created during - * directory reading or lookup, and were not bound to dentry, - * so they live here with reference counter being 1 and prevent - * umount from succeed since it believes that they are busy. - */ - count = atomic_read(&inode->i_count); - if (count) { - list_del_init(&inode->i_sb_list); - while (count--) - iput(&pi->vfs_inode); - } - } - - psb->trans_scan_timeout = psb->drop_scan_timeout = 0; - cancel_delayed_work_sync(&psb->dwork); - cancel_delayed_work_sync(&psb->drop_dwork); - flush_scheduled_work(); - - dprintk("%s: stopped workqueues.\n", __func__); - - pohmelfs_crypto_exit(psb); - pohmelfs_state_exit(psb); - - bdi_destroy(&psb->bdi); - - kfree(psb); - sb->s_fs_info = NULL; -} - -static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf) -{ - struct super_block *sb = dentry->d_sb; - struct pohmelfs_sb *psb = POHMELFS_SB(sb); - - /* - * There are no filesystem size limits yet. - */ - memset(buf, 0, sizeof(struct kstatfs)); - - buf->f_type = POHMELFS_MAGIC_NUM; /* 'POH.' */ - buf->f_bsize = sb->s_blocksize; - buf->f_files = psb->ino; - buf->f_namelen = 255; - buf->f_files = atomic_long_read(&psb->total_inodes); - buf->f_bfree = buf->f_bavail = psb->avail_size >> PAGE_SHIFT; - buf->f_blocks = psb->total_size >> PAGE_SHIFT; - - dprintk("%s: total: %llu, avail: %llu, inodes: %llu, bsize: %lu.\n", - __func__, psb->total_size, psb->avail_size, buf->f_files, sb->s_blocksize); - - return 0; -} - -static int pohmelfs_show_options(struct seq_file *seq, struct dentry *root) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(root->d_sb); - - seq_printf(seq, ",idx=%u", psb->idx); - seq_printf(seq, ",trans_scan_timeout=%u", jiffies_to_msecs(psb->trans_scan_timeout)); - seq_printf(seq, ",drop_scan_timeout=%u", jiffies_to_msecs(psb->drop_scan_timeout)); - seq_printf(seq, ",wait_on_page_timeout=%u", jiffies_to_msecs(psb->wait_on_page_timeout)); - seq_printf(seq, ",trans_retries=%u", psb->trans_retries); - seq_printf(seq, ",crypto_thread_num=%u", psb->crypto_thread_num); - seq_printf(seq, ",trans_max_pages=%u", psb->trans_max_pages); - seq_printf(seq, ",mcache_timeout=%u", jiffies_to_msecs(psb->mcache_timeout)); - if (psb->crypto_fail_unsupported) - seq_printf(seq, ",crypto_fail_unsupported"); - - return 0; -} - -enum { - pohmelfs_opt_idx, - pohmelfs_opt_crypto_thread_num, - pohmelfs_opt_trans_max_pages, - pohmelfs_opt_crypto_fail_unsupported, - - /* Remountable options */ - pohmelfs_opt_trans_scan_timeout, - pohmelfs_opt_drop_scan_timeout, - pohmelfs_opt_wait_on_page_timeout, - pohmelfs_opt_trans_retries, - pohmelfs_opt_mcache_timeout, -}; - -static struct match_token pohmelfs_tokens[] = { - {pohmelfs_opt_idx, "idx=%u"}, - {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"}, - {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"}, - {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"}, - {pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"}, - {pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"}, - {pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"}, - {pohmelfs_opt_trans_retries, "trans_retries=%u"}, - {pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"}, -}; - -static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount) -{ - char *p; - substring_t args[MAX_OPT_ARGS]; - int option, err; - - if (!options) - return 0; - - while ((p = strsep(&options, ",")) != NULL) { - int token; - if (!*p) - continue; - - token = match_token(p, pohmelfs_tokens, args); - - err = match_int(&args[0], &option); - if (err) - return err; - - if (remount && token <= pohmelfs_opt_crypto_fail_unsupported) - continue; - - switch (token) { - case pohmelfs_opt_idx: - psb->idx = option; - break; - case pohmelfs_opt_trans_scan_timeout: - psb->trans_scan_timeout = msecs_to_jiffies(option); - break; - case pohmelfs_opt_drop_scan_timeout: - psb->drop_scan_timeout = msecs_to_jiffies(option); - break; - case pohmelfs_opt_wait_on_page_timeout: - psb->wait_on_page_timeout = msecs_to_jiffies(option); - break; - case pohmelfs_opt_mcache_timeout: - psb->mcache_timeout = msecs_to_jiffies(option); - break; - case pohmelfs_opt_trans_retries: - psb->trans_retries = option; - break; - case pohmelfs_opt_crypto_thread_num: - psb->crypto_thread_num = option; - break; - case pohmelfs_opt_trans_max_pages: - psb->trans_max_pages = option; - break; - case pohmelfs_opt_crypto_fail_unsupported: - psb->crypto_fail_unsupported = 1; - break; - default: - return -EINVAL; - } - } - - return 0; -} - -static int pohmelfs_remount(struct super_block *sb, int *flags, char *data) -{ - int err; - struct pohmelfs_sb *psb = POHMELFS_SB(sb); - unsigned long old_sb_flags = sb->s_flags; - - err = pohmelfs_parse_options(data, psb, 1); - if (err) - goto err_out_restore; - - if (!(*flags & MS_RDONLY)) - sb->s_flags &= ~MS_RDONLY; - return 0; - -err_out_restore: - sb->s_flags = old_sb_flags; - return err; -} - -static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count) -{ - struct inode *inode = &pi->vfs_inode; - - dprintk("%s: %p: ino: %llu, owned: %d.\n", - __func__, inode, pi->ino, test_bit(NETFS_INODE_OWNED, &pi->state)); - - mutex_lock(&inode->i_mutex); - if (test_and_clear_bit(NETFS_INODE_OWNED, &pi->state)) { - filemap_fdatawrite(inode->i_mapping); - inode->i_sb->s_op->write_inode(inode, 0); - } - -#ifdef POHMELFS_TRUNCATE_ON_INODE_FLUSH - truncate_inode_pages(inode->i_mapping, 0); -#endif - - pohmelfs_data_unlock(pi, 0, ~0, POHMELFS_WRITE_LOCK); - mutex_unlock(&inode->i_mutex); -} - -static void pohmelfs_put_inode_count(struct pohmelfs_inode *pi, unsigned int count) -{ - dprintk("%s: ino: %llu, pi: %p, inode: %p, count: %u.\n", - __func__, pi->ino, pi, &pi->vfs_inode, count); - - if (test_and_clear_bit(NETFS_INODE_NEED_FLUSH, &pi->state)) - pohmelfs_flush_inode(pi, count); - - while (count--) - iput(&pi->vfs_inode); -} - -static void pohmelfs_drop_scan(struct work_struct *work) -{ - struct pohmelfs_sb *psb = - container_of(work, struct pohmelfs_sb, drop_dwork.work); - struct pohmelfs_inode *pi; - unsigned int count = 0; - - while ((pi = pohmelfs_get_inode_from_list(psb, &psb->drop_list, &count))) - pohmelfs_put_inode_count(pi, count); - - pohmelfs_check_states(psb); - - if (psb->drop_scan_timeout) - schedule_delayed_work(&psb->drop_dwork, psb->drop_scan_timeout); -} - -/* - * Run through all transactions starting from the oldest, - * drop transaction from current state and try to send it - * to all remote nodes, which are currently installed. - */ -static void pohmelfs_trans_scan_state(struct netfs_state *st) -{ - struct rb_node *rb_node; - struct netfs_trans_dst *dst; - struct pohmelfs_sb *psb = st->psb; - unsigned int timeout = psb->trans_scan_timeout; - struct netfs_trans *t; - int err; - - mutex_lock(&st->trans_lock); - for (rb_node = rb_first(&st->trans_root); rb_node; ) { - dst = rb_entry(rb_node, struct netfs_trans_dst, state_entry); - t = dst->trans; - - if (timeout && time_after(dst->send_time + timeout, jiffies) - && dst->retries == 0) - break; - - dprintk("%s: t: %p, gen: %u, st: %p, retries: %u, max: %u.\n", - __func__, t, t->gen, st, dst->retries, psb->trans_retries); - netfs_trans_get(t); - - rb_node = rb_next(rb_node); - - err = -ETIMEDOUT; - if (timeout && (++dst->retries < psb->trans_retries)) - err = netfs_trans_resend(t, psb); - - if (err || (t->flags & NETFS_TRANS_SINGLE_DST)) { - if (netfs_trans_remove_nolock(dst, st)) - netfs_trans_drop_dst_nostate(dst); - } - - t->result = err; - netfs_trans_put(t); - } - mutex_unlock(&st->trans_lock); -} - -/* - * Walk through all installed network states and resend all - * transactions, which are old enough. - */ -static void pohmelfs_trans_scan(struct work_struct *work) -{ - struct pohmelfs_sb *psb = - container_of(work, struct pohmelfs_sb, dwork.work); - struct netfs_state *st; - struct pohmelfs_config *c; - - mutex_lock(&psb->state_lock); - list_for_each_entry(c, &psb->state_list, config_entry) { - st = &c->state; - - pohmelfs_trans_scan_state(st); - } - mutex_unlock(&psb->state_lock); - - /* - * If no timeout specified then system is in the middle of umount process, - * so no need to reschedule scanning process again. - */ - if (psb->trans_scan_timeout) - schedule_delayed_work(&psb->dwork, psb->trans_scan_timeout); -} - -int pohmelfs_meta_command_data(struct pohmelfs_inode *pi, u64 id, unsigned int cmd_op, char *addon, - unsigned int flags, netfs_trans_complete_t complete, void *priv, u64 start) -{ - struct inode *inode = &pi->vfs_inode; - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - int err = 0, sz; - struct netfs_trans *t; - int path_len, addon_len = 0; - void *data; - struct netfs_inode_info *info; - struct netfs_cmd *cmd; - - dprintk("%s: ino: %llu, cmd: %u, addon: %p.\n", __func__, pi->ino, cmd_op, addon); - - path_len = pohmelfs_path_length(pi); - if (path_len < 0) { - err = path_len; - goto err_out_exit; - } - - if (addon) - addon_len = strlen(addon) + 1; /* 0-byte */ - sz = addon_len; - - if (cmd_op == NETFS_INODE_INFO) - sz += sizeof(struct netfs_inode_info); - - t = netfs_trans_alloc(psb, sz + path_len, flags, 0); - if (!t) { - err = -ENOMEM; - goto err_out_exit; - } - t->complete = complete; - t->private = priv; - - cmd = netfs_trans_current(t); - data = (void *)(cmd + 1); - - if (cmd_op == NETFS_INODE_INFO) { - info = (struct netfs_inode_info *)(cmd + 1); - data = (void *)(info + 1); - - /* - * We are under i_mutex, can read and change whatever we want... - */ - info->mode = inode->i_mode; - info->nlink = inode->i_nlink; - info->uid = inode->i_uid; - info->gid = inode->i_gid; - info->blocks = inode->i_blocks; - info->rdev = inode->i_rdev; - info->size = inode->i_size; - info->version = inode->i_version; - - netfs_convert_inode_info(info); - } - - path_len = pohmelfs_construct_path_string(pi, data, path_len); - if (path_len < 0) - goto err_out_free; - - dprintk("%s: path_len: %d.\n", __func__, path_len); - - if (addon) { - path_len--; /* Do not place null-byte before the addon */ - path_len += sprintf(data + path_len, "/%s", addon) + 1; /* 0 - byte */ - } - - sz += path_len; - - cmd->cmd = cmd_op; - cmd->ext = path_len; - cmd->size = sz; - cmd->id = id; - cmd->start = start; - - netfs_convert_cmd(cmd); - netfs_trans_update(cmd, t, sz); - - /* - * Note, that it is possible to leak error here: transaction callback will not - * be invoked for allocation path failure. - */ - return netfs_trans_finish(t, psb); - -err_out_free: - netfs_trans_free(t); -err_out_exit: - if (complete) - complete(NULL, 0, priv, err); - return err; -} - -int pohmelfs_meta_command(struct pohmelfs_inode *pi, unsigned int cmd_op, unsigned int flags, - netfs_trans_complete_t complete, void *priv, u64 start) -{ - return pohmelfs_meta_command_data(pi, pi->ino, cmd_op, NULL, flags, complete, priv, start); -} - -/* - * Send request and wait for POHMELFS root capabilities response, - * which will update server's informaion about size of the export, - * permissions, number of objects, available size and so on. - */ -static int pohmelfs_root_handshake(struct pohmelfs_sb *psb) -{ - struct netfs_trans *t; - struct netfs_cmd *cmd; - int err = -ENOMEM; - - t = netfs_trans_alloc(psb, 0, 0, 0); - if (!t) - goto err_out_exit; - - cmd = netfs_trans_current(t); - - cmd->cmd = NETFS_CAPABILITIES; - cmd->id = POHMELFS_ROOT_CAPABILITIES; - cmd->size = 0; - cmd->start = 0; - cmd->ext = 0; - cmd->csize = 0; - - netfs_convert_cmd(cmd); - netfs_trans_update(cmd, t, 0); - - err = netfs_trans_finish(t, psb); - if (err) - goto err_out_exit; - - psb->flags = ~0; - err = wait_event_interruptible_timeout(psb->wait, - (psb->flags != ~0), - psb->wait_on_page_timeout); - if (!err) - err = -ETIMEDOUT; - else if (err > 0) - err = -psb->flags; - - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - return err; -} - -static int pohmelfs_show_stats(struct seq_file *m, struct dentry *root) -{ - struct netfs_state *st; - struct pohmelfs_ctl *ctl; - struct pohmelfs_sb *psb = POHMELFS_SB(root->d_sb); - struct pohmelfs_config *c; - - mutex_lock(&psb->state_lock); - - seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n"); - - list_for_each_entry(c, &psb->state_list, config_entry) { - st = &c->state; - ctl = &st->ctl; - - seq_printf(m, "%u ", ctl->idx); - if (ctl->addr.sa_family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr; - seq_printf(m, "%pI4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port)); - } else if (ctl->addr.sa_family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr; - seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port)); - } else { - unsigned int i; - for (i = 0; i < ctl->addrlen; ++i) - seq_printf(m, "%02x.", ctl->addr.addr[i]); - } - - seq_printf(m, " %u %u %d %u %x\n", - ctl->type, ctl->proto, - st->socket != NULL, - ctl->prio, ctl->perm); - } - mutex_unlock(&psb->state_lock); - - return 0; -} - -static const struct super_operations pohmelfs_sb_ops = { - .alloc_inode = pohmelfs_alloc_inode, - .destroy_inode = pohmelfs_destroy_inode, - .drop_inode = pohmelfs_drop_inode, - .write_inode = pohmelfs_write_inode, - .put_super = pohmelfs_put_super, - .remount_fs = pohmelfs_remount, - .statfs = pohmelfs_statfs, - .show_options = pohmelfs_show_options, - .show_stats = pohmelfs_show_stats, -}; - -/* - * Allocate private superblock and create root dir. - */ -static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent) -{ - struct pohmelfs_sb *psb; - int err = -ENOMEM; - struct inode *root; - struct pohmelfs_inode *npi; - struct qstr str; - - psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL); - if (!psb) - goto err_out_exit; - - err = bdi_init(&psb->bdi); - if (err) - goto err_out_free_sb; - - err = bdi_register(&psb->bdi, NULL, "pfs-%d", atomic_inc_return(&psb_bdi_num)); - if (err) { - bdi_destroy(&psb->bdi); - goto err_out_free_sb; - } - - sb->s_fs_info = psb; - sb->s_op = &pohmelfs_sb_ops; - sb->s_magic = POHMELFS_MAGIC_NUM; - sb->s_maxbytes = MAX_LFS_FILESIZE; - sb->s_blocksize = PAGE_SIZE; - sb->s_bdi = &psb->bdi; - - psb->sb = sb; - - psb->ino = 2; - psb->idx = 0; - psb->active_state = NULL; - psb->trans_retries = 5; - psb->trans_data_size = PAGE_SIZE; - psb->drop_scan_timeout = msecs_to_jiffies(1000); - psb->trans_scan_timeout = msecs_to_jiffies(5000); - psb->wait_on_page_timeout = msecs_to_jiffies(5000); - init_waitqueue_head(&psb->wait); - - spin_lock_init(&psb->ino_lock); - - INIT_LIST_HEAD(&psb->drop_list); - - mutex_init(&psb->mcache_lock); - psb->mcache_root = RB_ROOT; - psb->mcache_timeout = msecs_to_jiffies(5000); - atomic_long_set(&psb->mcache_gen, 0); - - psb->trans_max_pages = 100; - - psb->crypto_align_size = 16; - psb->crypto_attached_size = 0; - psb->hash_strlen = 0; - psb->cipher_strlen = 0; - psb->perform_crypto = 0; - psb->crypto_thread_num = 2; - psb->crypto_fail_unsupported = 0; - mutex_init(&psb->crypto_thread_lock); - INIT_LIST_HEAD(&psb->crypto_ready_list); - INIT_LIST_HEAD(&psb->crypto_active_list); - - atomic_set(&psb->trans_gen, 1); - atomic_long_set(&psb->total_inodes, 0); - - mutex_init(&psb->state_lock); - INIT_LIST_HEAD(&psb->state_list); - - err = pohmelfs_parse_options((char *) data, psb, 0); - if (err) - goto err_out_free_bdi; - - err = pohmelfs_copy_crypto(psb); - if (err) - goto err_out_free_bdi; - - err = pohmelfs_state_init(psb); - if (err) - goto err_out_free_strings; - - err = pohmelfs_crypto_init(psb); - if (err) - goto err_out_state_exit; - - err = pohmelfs_root_handshake(psb); - if (err) - goto err_out_crypto_exit; - - str.name = "/"; - str.hash = jhash("/", 1, 0); - str.len = 1; - - npi = pohmelfs_create_entry_local(psb, NULL, &str, 0, 0755|S_IFDIR); - if (IS_ERR(npi)) { - err = PTR_ERR(npi); - goto err_out_crypto_exit; - } - set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state); - clear_bit(NETFS_INODE_OWNED, &npi->state); - - root = &npi->vfs_inode; - - sb->s_root = d_alloc_root(root); - if (!sb->s_root) - goto err_out_put_root; - - INIT_DELAYED_WORK(&psb->drop_dwork, pohmelfs_drop_scan); - schedule_delayed_work(&psb->drop_dwork, psb->drop_scan_timeout); - - INIT_DELAYED_WORK(&psb->dwork, pohmelfs_trans_scan); - schedule_delayed_work(&psb->dwork, psb->trans_scan_timeout); - - return 0; - -err_out_put_root: - iput(root); -err_out_crypto_exit: - pohmelfs_crypto_exit(psb); -err_out_state_exit: - pohmelfs_state_exit(psb); -err_out_free_strings: - kfree(psb->cipher_string); - kfree(psb->hash_string); -err_out_free_bdi: - bdi_destroy(&psb->bdi); -err_out_free_sb: - kfree(psb); -err_out_exit: - - dprintk("%s: err: %d.\n", __func__, err); - return err; -} - -/* - * Some VFS magic here... - */ -static struct dentry *pohmelfs_mount(struct file_system_type *fs_type, - int flags, const char *dev_name, void *data) -{ - return mount_nodev(fs_type, flags, data, pohmelfs_fill_super); -} - -/* - * We need this to sync all inodes earlier, since when writeback - * is invoked from the umount/mntput path dcache is already shrunk, - * see generic_shutdown_super(), and no inodes can access the path. - */ -static void pohmelfs_kill_super(struct super_block *sb) -{ - sync_inodes_sb(sb); - kill_anon_super(sb); -} - -static struct file_system_type pohmel_fs_type = { - .owner = THIS_MODULE, - .name = "pohmel", - .mount = pohmelfs_mount, - .kill_sb = pohmelfs_kill_super, -}; - -/* - * Cache and module initializations and freeing routings. - */ -static void pohmelfs_init_once(void *data) -{ - struct pohmelfs_inode *pi = data; - - inode_init_once(&pi->vfs_inode); -} - -static int __init pohmelfs_init_inodecache(void) -{ - pohmelfs_inode_cache = kmem_cache_create("pohmelfs_inode_cache", - sizeof(struct pohmelfs_inode), - 0, (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD), - pohmelfs_init_once); - if (!pohmelfs_inode_cache) - return -ENOMEM; - - return 0; -} - -static void pohmelfs_destroy_inodecache(void) -{ - kmem_cache_destroy(pohmelfs_inode_cache); -} - -static int __init init_pohmel_fs(void) -{ - int err; - - err = pohmelfs_config_init(); - if (err) - goto err_out_exit; - - err = pohmelfs_init_inodecache(); - if (err) - goto err_out_config_exit; - - err = pohmelfs_mcache_init(); - if (err) - goto err_out_destroy; - - err = netfs_trans_init(); - if (err) - goto err_out_mcache_exit; - - err = register_filesystem(&pohmel_fs_type); - if (err) - goto err_out_trans; - - return 0; - -err_out_trans: - netfs_trans_exit(); -err_out_mcache_exit: - pohmelfs_mcache_exit(); -err_out_destroy: - pohmelfs_destroy_inodecache(); -err_out_config_exit: - pohmelfs_config_exit(); -err_out_exit: - return err; -} - -static void __exit exit_pohmel_fs(void) -{ - unregister_filesystem(&pohmel_fs_type); - pohmelfs_destroy_inodecache(); - pohmelfs_mcache_exit(); - pohmelfs_config_exit(); - netfs_trans_exit(); -} - -module_init(init_pohmel_fs); -module_exit(exit_pohmel_fs); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); -MODULE_DESCRIPTION("Pohmel filesystem"); diff --git a/drivers/staging/pohmelfs/lock.c b/drivers/staging/pohmelfs/lock.c deleted file mode 100644 index 6710114cd425..000000000000 --- a/drivers/staging/pohmelfs/lock.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include - -#include "netfs.h" - -static int pohmelfs_send_lock_trans(struct pohmelfs_inode *pi, - u64 id, u64 start, u32 size, int type) -{ - struct inode *inode = &pi->vfs_inode; - struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - struct netfs_trans *t; - struct netfs_cmd *cmd; - int path_len, err; - void *data; - struct netfs_lock *l; - int isize = (type & POHMELFS_LOCK_GRAB) ? 0 : sizeof(struct netfs_inode_info); - - err = pohmelfs_path_length(pi); - if (err < 0) - goto err_out_exit; - - path_len = err; - - err = -ENOMEM; - t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, - NETFS_TRANS_SINGLE_DST, 0); - if (!t) - goto err_out_exit; - - cmd = netfs_trans_current(t); - data = cmd + 1; - - err = pohmelfs_construct_path_string(pi, data, path_len); - if (err < 0) - goto err_out_free; - path_len = err; - - l = data + path_len; - - l->start = start; - l->size = size; - l->type = type; - l->ino = pi->ino; - - cmd->cmd = NETFS_LOCK; - cmd->start = 0; - cmd->id = id; - cmd->size = sizeof(struct netfs_lock) + path_len + isize; - cmd->ext = path_len; - cmd->csize = 0; - - netfs_convert_cmd(cmd); - netfs_convert_lock(l); - - if (isize) { - struct netfs_inode_info *info = (struct netfs_inode_info *)(l + 1); - - info->mode = inode->i_mode; - info->nlink = inode->i_nlink; - info->uid = inode->i_uid; - info->gid = inode->i_gid; - info->blocks = inode->i_blocks; - info->rdev = inode->i_rdev; - info->size = inode->i_size; - info->version = inode->i_version; - - netfs_convert_inode_info(info); - } - - netfs_trans_update(cmd, t, path_len + sizeof(struct netfs_lock) + isize); - - return netfs_trans_finish(t, psb); - -err_out_free: - netfs_trans_free(t); -err_out_exit: - printk("%s: err: %d.\n", __func__, err); - return err; -} - -int pohmelfs_data_lock(struct pohmelfs_inode *pi, u64 start, u32 size, int type) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb); - struct pohmelfs_mcache *m; - int err = -ENOMEM; - struct iattr iattr; - struct inode *inode = &pi->vfs_inode; - - dprintk("%s: %p: ino: %llu, start: %llu, size: %u, " - "type: %d, locked as: %d, owned: %d.\n", - __func__, &pi->vfs_inode, pi->ino, - start, size, type, pi->lock_type, - !!test_bit(NETFS_INODE_OWNED, &pi->state)); - - if (!pohmelfs_need_lock(pi, type)) - return 0; - - m = pohmelfs_mcache_alloc(psb, start, size, NULL); - if (IS_ERR(m)) - return PTR_ERR(m); - - err = pohmelfs_send_lock_trans(pi, m->gen, start, size, - type | POHMELFS_LOCK_GRAB); - if (err) - goto err_out_put; - - err = wait_for_completion_timeout(&m->complete, psb->mcache_timeout); - if (err) - err = m->err; - else - err = -ETIMEDOUT; - - if (err) { - printk("%s: %p: ino: %llu, mgen: %llu, start: %llu, size: %u, err: %d.\n", - __func__, &pi->vfs_inode, pi->ino, m->gen, start, size, err); - } - - if (err && (err != -ENOENT)) - goto err_out_put; - - if (!err) { - netfs_convert_inode_info(&m->info); - - iattr.ia_valid = ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE | ATTR_ATIME; - iattr.ia_mode = m->info.mode; - iattr.ia_uid = m->info.uid; - iattr.ia_gid = m->info.gid; - iattr.ia_size = m->info.size; - iattr.ia_atime = CURRENT_TIME; - - dprintk("%s: %p: ino: %llu, mgen: %llu, start: %llu, isize: %llu -> %llu.\n", - __func__, &pi->vfs_inode, pi->ino, m->gen, start, inode->i_size, m->info.size); - - err = pohmelfs_setattr_raw(inode, &iattr); - if (!err) { - struct dentry *dentry = d_find_alias(inode); - if (dentry) { - fsnotify_change(dentry, iattr.ia_valid); - dput(dentry); - } - } - } - - pi->lock_type = type; - set_bit(NETFS_INODE_OWNED, &pi->state); - - pohmelfs_mcache_put(psb, m); - - return 0; - -err_out_put: - pohmelfs_mcache_put(psb, m); - return err; -} - -int pohmelfs_data_unlock(struct pohmelfs_inode *pi, u64 start, u32 size, int type) -{ - dprintk("%s: %p: ino: %llu, start: %llu, size: %u, type: %d.\n", - __func__, &pi->vfs_inode, pi->ino, start, size, type); - pi->lock_type = 0; - clear_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &pi->state); - clear_bit(NETFS_INODE_OWNED, &pi->state); - return pohmelfs_send_lock_trans(pi, pi->ino, start, size, type); -} diff --git a/drivers/staging/pohmelfs/mcache.c b/drivers/staging/pohmelfs/mcache.c deleted file mode 100644 index e22665cdd16c..000000000000 --- a/drivers/staging/pohmelfs/mcache.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - -#include "netfs.h" - -static struct kmem_cache *pohmelfs_mcache_cache; -static mempool_t *pohmelfs_mcache_pool; - -static inline int pohmelfs_mcache_cmp(u64 gen, u64 new) -{ - if (gen < new) - return 1; - if (gen > new) - return -1; - return 0; -} - -struct pohmelfs_mcache *pohmelfs_mcache_search(struct pohmelfs_sb *psb, u64 gen) -{ - struct rb_root *root = &psb->mcache_root; - struct rb_node *n = root->rb_node; - struct pohmelfs_mcache *tmp, *ret = NULL; - int cmp; - - while (n) { - tmp = rb_entry(n, struct pohmelfs_mcache, mcache_entry); - - cmp = pohmelfs_mcache_cmp(tmp->gen, gen); - if (cmp < 0) - n = n->rb_left; - else if (cmp > 0) - n = n->rb_right; - else { - ret = tmp; - pohmelfs_mcache_get(ret); - break; - } - } - - return ret; -} - -static int pohmelfs_mcache_insert(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m) -{ - struct rb_root *root = &psb->mcache_root; - struct rb_node **n = &root->rb_node, *parent = NULL; - struct pohmelfs_mcache *ret = NULL, *tmp; - int cmp; - - while (*n) { - parent = *n; - - tmp = rb_entry(parent, struct pohmelfs_mcache, mcache_entry); - - cmp = pohmelfs_mcache_cmp(tmp->gen, m->gen); - if (cmp < 0) - n = &parent->rb_left; - else if (cmp > 0) - n = &parent->rb_right; - else { - ret = tmp; - break; - } - } - - if (ret) - return -EEXIST; - - rb_link_node(&m->mcache_entry, parent, n); - rb_insert_color(&m->mcache_entry, root); - - return 0; -} - -static int pohmelfs_mcache_remove(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m) -{ - if (m && m->mcache_entry.rb_parent_color) { - rb_erase(&m->mcache_entry, &psb->mcache_root); - m->mcache_entry.rb_parent_color = 0; - return 1; - } - return 0; -} - -void pohmelfs_mcache_remove_locked(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m) -{ - mutex_lock(&psb->mcache_lock); - pohmelfs_mcache_remove(psb, m); - mutex_unlock(&psb->mcache_lock); -} - -struct pohmelfs_mcache *pohmelfs_mcache_alloc(struct pohmelfs_sb *psb, u64 start, - unsigned int size, void *data) -{ - struct pohmelfs_mcache *m; - int err = -ENOMEM; - - m = mempool_alloc(pohmelfs_mcache_pool, GFP_KERNEL); - if (!m) - goto err_out_exit; - - init_completion(&m->complete); - m->err = 0; - atomic_set(&m->refcnt, 1); - m->data = data; - m->start = start; - m->size = size; - m->gen = atomic_long_inc_return(&psb->mcache_gen); - - mutex_lock(&psb->mcache_lock); - err = pohmelfs_mcache_insert(psb, m); - mutex_unlock(&psb->mcache_lock); - if (err) - goto err_out_free; - - return m; - -err_out_free: - mempool_free(m, pohmelfs_mcache_pool); -err_out_exit: - return ERR_PTR(err); -} - -void pohmelfs_mcache_free(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m) -{ - pohmelfs_mcache_remove_locked(psb, m); - - mempool_free(m, pohmelfs_mcache_pool); -} - -int __init pohmelfs_mcache_init(void) -{ - pohmelfs_mcache_cache = kmem_cache_create("pohmelfs_mcache_cache", - sizeof(struct pohmelfs_mcache), - 0, (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD), NULL); - if (!pohmelfs_mcache_cache) - goto err_out_exit; - - pohmelfs_mcache_pool = mempool_create_slab_pool(256, pohmelfs_mcache_cache); - if (!pohmelfs_mcache_pool) - goto err_out_free; - - return 0; - -err_out_free: - kmem_cache_destroy(pohmelfs_mcache_cache); -err_out_exit: - return -ENOMEM; -} - -void pohmelfs_mcache_exit(void) -{ - mempool_destroy(pohmelfs_mcache_pool); - kmem_cache_destroy(pohmelfs_mcache_cache); -} diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c deleted file mode 100644 index b2e918622088..000000000000 --- a/drivers/staging/pohmelfs/net.c +++ /dev/null @@ -1,1209 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "netfs.h" - -/* - * Async machinery lives here. - * All commands being sent to server do _not_ require sync reply, - * instead, if it is really needed, like readdir or readpage, caller - * sleeps waiting for data, which will be placed into provided buffer - * and caller will be awakened. - * - * Every command response can come without some listener. For example - * readdir response will add new objects into cache without appropriate - * request from userspace. This is used in cache coherency. - * - * If object is not found for given data, it is discarded. - * - * All requests are received by dedicated kernel thread. - */ - -/* - * Basic network sending/receiving functions. - * Blocked mode is used. - */ -static int netfs_data_recv(struct netfs_state *st, void *buf, u64 size) -{ - struct msghdr msg; - struct kvec iov; - int err; - - BUG_ON(!size); - - iov.iov_base = buf; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_DONTWAIT; - - err = kernel_recvmsg(st->socket, &msg, &iov, 1, iov.iov_len, - msg.msg_flags); - if (err <= 0) { - printk("%s: failed to recv data: size: %llu, err: %d.\n", __func__, size, err); - if (err == 0) - err = -ECONNRESET; - } - - return err; -} - -static int pohmelfs_data_recv(struct netfs_state *st, void *data, unsigned int size) -{ - unsigned int revents = 0; - unsigned int err_mask = POLLERR | POLLHUP | POLLRDHUP; - unsigned int mask = err_mask | POLLIN; - int err = 0; - - while (size && !err) { - revents = netfs_state_poll(st); - - if (!(revents & mask)) { - DEFINE_WAIT(wait); - - for (;;) { - prepare_to_wait(&st->thread_wait, &wait, TASK_INTERRUPTIBLE); - if (kthread_should_stop()) - break; - - revents = netfs_state_poll(st); - - if (revents & mask) - break; - - if (signal_pending(current)) - break; - - schedule(); - continue; - } - finish_wait(&st->thread_wait, &wait); - } - - err = 0; - netfs_state_lock(st); - if (st->socket && (st->read_socket == st->socket) && (revents & POLLIN)) { - err = netfs_data_recv(st, data, size); - if (err > 0) { - data += err; - size -= err; - err = 0; - } else if (err == 0) - err = -ECONNRESET; - } - - if (revents & err_mask) { - printk("%s: revents: %x, socket: %p, size: %u, err: %d.\n", - __func__, revents, st->socket, size, err); - err = -ECONNRESET; - } - netfs_state_unlock(st); - - if (err < 0) { - if (netfs_state_trylock_send(st)) { - netfs_state_exit(st); - err = netfs_state_init(st); - if (!err) - err = -EAGAIN; - netfs_state_unlock_send(st); - } else { - st->need_reset = 1; - } - } - - if (kthread_should_stop()) - err = -ENODEV; - - if (err) - printk("%s: socket: %p, read_socket: %p, revents: %x, rev_error: %d, " - "should_stop: %d, size: %u, err: %d.\n", - __func__, st->socket, st->read_socket, - revents, revents & err_mask, kthread_should_stop(), size, err); - } - - return err; -} - -int pohmelfs_data_recv_and_check(struct netfs_state *st, void *data, unsigned int size) -{ - struct netfs_cmd *cmd = &st->cmd; - int err; - - err = pohmelfs_data_recv(st, data, size); - if (err) - return err; - - return pohmelfs_crypto_process_input_data(&st->eng, cmd->iv, data, NULL, size); -} - -/* - * Polling machinery. - */ - -struct netfs_poll_helper { - poll_table pt; - struct netfs_state *st; -}; - -static int netfs_queue_wake(wait_queue_t *wait, unsigned mode, int sync, void *key) -{ - struct netfs_state *st = container_of(wait, struct netfs_state, wait); - - wake_up(&st->thread_wait); - return 1; -} - -static void netfs_queue_func(struct file *file, wait_queue_head_t *whead, - poll_table *pt) -{ - struct netfs_state *st = container_of(pt, struct netfs_poll_helper, pt)->st; - - st->whead = whead; - init_waitqueue_func_entry(&st->wait, netfs_queue_wake); - add_wait_queue(whead, &st->wait); -} - -static void netfs_poll_exit(struct netfs_state *st) -{ - if (st->whead) { - remove_wait_queue(st->whead, &st->wait); - st->whead = NULL; - } -} - -static int netfs_poll_init(struct netfs_state *st) -{ - struct netfs_poll_helper ph; - - ph.st = st; - init_poll_funcptr(&ph.pt, &netfs_queue_func); - - st->socket->ops->poll(NULL, st->socket, &ph.pt); - return 0; -} - -/* - * Get response for readpage command. We search inode and page in its mapping - * and copy data into. If it was async request, then we queue page into shared - * data and wakeup listener, who will copy it to userspace. - * - * There is a work in progress of allowing to call copy_to_user() directly from - * async receiving kernel thread. - */ -static int pohmelfs_read_page_response(struct netfs_state *st) -{ - struct pohmelfs_sb *psb = st->psb; - struct netfs_cmd *cmd = &st->cmd; - struct inode *inode; - struct page *page; - int err = 0; - - if (cmd->size > PAGE_CACHE_SIZE) { - err = -EINVAL; - goto err_out_exit; - } - - inode = ilookup(st->psb->sb, cmd->id); - if (!inode) { - printk("%s: failed to find inode: id: %llu.\n", __func__, cmd->id); - err = -ENOENT; - goto err_out_exit; - } - - page = find_get_page(inode->i_mapping, cmd->start >> PAGE_CACHE_SHIFT); - if (!page || !PageLocked(page)) { - printk("%s: failed to find/lock page: page: %p, id: %llu, start: %llu, index: %llu.\n", - __func__, page, cmd->id, cmd->start, cmd->start >> PAGE_CACHE_SHIFT); - - while (cmd->size) { - unsigned int sz = min(cmd->size, st->size); - - err = pohmelfs_data_recv(st, st->data, sz); - if (err) - break; - - cmd->size -= sz; - } - - err = -ENODEV; - if (page) - goto err_out_page_put; - goto err_out_put; - } - - if (cmd->size) { - void *addr; - - addr = kmap(page); - err = pohmelfs_data_recv(st, addr, cmd->size); - kunmap(page); - - if (err) - goto err_out_page_unlock; - } - - dprintk("%s: page: %p, start: %llu, size: %u, locked: %d.\n", - __func__, page, cmd->start, cmd->size, PageLocked(page)); - - SetPageChecked(page); - if ((psb->hash_string || psb->cipher_string) && psb->perform_crypto && cmd->size) { - err = pohmelfs_crypto_process_input_page(&st->eng, page, cmd->size, cmd->iv); - if (err < 0) - goto err_out_page_unlock; - } else { - SetPageUptodate(page); - unlock_page(page); - page_cache_release(page); - } - - pohmelfs_put_inode(POHMELFS_I(inode)); - wake_up(&st->psb->wait); - - return 0; - -err_out_page_unlock: - SetPageError(page); - unlock_page(page); -err_out_page_put: - page_cache_release(page); -err_out_put: - pohmelfs_put_inode(POHMELFS_I(inode)); -err_out_exit: - wake_up(&st->psb->wait); - return err; -} - -static int pohmelfs_check_name(struct pohmelfs_inode *parent, struct qstr *str, - struct netfs_inode_info *info) -{ - struct inode *inode; - struct pohmelfs_name *n; - int err = 0; - u64 ino = 0; - - mutex_lock(&parent->offset_lock); - n = pohmelfs_search_hash(parent, str->hash); - if (n) - ino = n->ino; - mutex_unlock(&parent->offset_lock); - - if (!ino) - goto out; - - inode = ilookup(parent->vfs_inode.i_sb, ino); - if (!inode) - goto out; - - dprintk("%s: parent: %llu, inode: %llu.\n", __func__, parent->ino, ino); - - pohmelfs_fill_inode(inode, info); - pohmelfs_put_inode(POHMELFS_I(inode)); - err = -EEXIST; -out: - return err; -} - -/* - * Readdir response from server. If special field is set, we wakeup - * listener (readdir() call), which will copy data to userspace. - */ -static int pohmelfs_readdir_response(struct netfs_state *st) -{ - struct inode *inode; - struct netfs_cmd *cmd = &st->cmd; - struct netfs_inode_info *info; - struct pohmelfs_inode *parent = NULL, *npi; - int err = 0, last = cmd->ext; - struct qstr str; - - if (cmd->size > st->size) - return -EINVAL; - - inode = ilookup(st->psb->sb, cmd->id); - if (!inode) { - printk("%s: failed to find inode: id: %llu.\n", __func__, cmd->id); - return -ENOENT; - } - parent = POHMELFS_I(inode); - - if (!cmd->size && cmd->start) { - err = -cmd->start; - goto out; - } - - if (cmd->size) { - char *name; - - err = pohmelfs_data_recv_and_check(st, st->data, cmd->size); - if (err) - goto err_out_put; - - info = (struct netfs_inode_info *)(st->data); - - name = (char *)(info + 1); - str.len = cmd->size - sizeof(struct netfs_inode_info) - 1 - cmd->cpad; - name[str.len] = 0; - str.name = name; - str.hash = jhash(str.name, str.len, 0); - - netfs_convert_inode_info(info); - - if (parent) { - err = pohmelfs_check_name(parent, &str, info); - if (err) { - if (err == -EEXIST) - err = 0; - goto out; - } - } - - info->ino = cmd->start; - if (!info->ino) - info->ino = pohmelfs_new_ino(st->psb); - - dprintk("%s: parent: %llu, ino: %llu, name: '%s', hash: %x, len: %u, mode: %o.\n", - __func__, parent->ino, info->ino, str.name, str.hash, str.len, - info->mode); - - npi = pohmelfs_new_inode(st->psb, parent, &str, info, 0); - if (IS_ERR(npi)) { - err = PTR_ERR(npi); - - if (err != -EEXIST) - goto err_out_put; - } else { - struct dentry *dentry, *alias, *pd; - - set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state); - clear_bit(NETFS_INODE_OWNED, &npi->state); - - pd = d_find_alias(&parent->vfs_inode); - if (pd) { - str.hash = full_name_hash(str.name, str.len); - dentry = d_alloc(pd, &str); - if (dentry) { - alias = d_materialise_unique(dentry, &npi->vfs_inode); - if (alias) - dput(alias); - } - - dput(dentry); - dput(pd); - } - } - } -out: - if (last) { - set_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &parent->state); - set_bit(NETFS_INODE_REMOTE_SYNCED, &parent->state); - wake_up(&st->psb->wait); - } - pohmelfs_put_inode(parent); - - return err; - -err_out_put: - clear_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &parent->state); - printk("%s: parent: %llu, ino: %llu, cmd_id: %llu.\n", __func__, parent->ino, cmd->start, cmd->id); - pohmelfs_put_inode(parent); - wake_up(&st->psb->wait); - return err; -} - -/* - * Lookup command response. - * It searches for inode to be looked at (if it exists) and substitutes - * its inode information (size, permission, mode and so on), if inode does - * not exist, new one will be created and inserted into caches. - */ -static int pohmelfs_lookup_response(struct netfs_state *st) -{ - struct inode *inode = NULL; - struct netfs_cmd *cmd = &st->cmd; - struct netfs_inode_info *info; - struct pohmelfs_inode *parent = NULL, *npi; - int err = -EINVAL; - char *name; - - inode = ilookup(st->psb->sb, cmd->id); - if (!inode) { - printk("%s: lookup response: id: %llu, start: %llu, size: %u.\n", - __func__, cmd->id, cmd->start, cmd->size); - err = -ENOENT; - goto err_out_exit; - } - parent = POHMELFS_I(inode); - - if (!cmd->size) { - err = -cmd->start; - goto err_out_put; - } - - if (cmd->size < sizeof(struct netfs_inode_info)) { - printk("%s: broken lookup response: id: %llu, start: %llu, size: %u.\n", - __func__, cmd->id, cmd->start, cmd->size); - err = -EINVAL; - goto err_out_put; - } - - err = pohmelfs_data_recv_and_check(st, st->data, cmd->size); - if (err) - goto err_out_put; - - info = (struct netfs_inode_info *)(st->data); - name = (char *)(info + 1); - - netfs_convert_inode_info(info); - - info->ino = cmd->start; - if (!info->ino) - info->ino = pohmelfs_new_ino(st->psb); - - dprintk("%s: parent: %llu, ino: %llu, name: '%s', start: %llu.\n", - __func__, parent->ino, info->ino, name, cmd->start); - - if (cmd->start) - npi = pohmelfs_new_inode(st->psb, parent, NULL, info, 0); - else { - struct qstr str; - - str.name = name; - str.len = cmd->size - sizeof(struct netfs_inode_info) - 1 - cmd->cpad; - str.hash = jhash(name, str.len, 0); - - npi = pohmelfs_new_inode(st->psb, parent, &str, info, 0); - } - if (IS_ERR(npi)) { - err = PTR_ERR(npi); - - if (err != -EEXIST) - goto err_out_put; - } else { - set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state); - clear_bit(NETFS_INODE_OWNED, &npi->state); - } - - clear_bit(NETFS_COMMAND_PENDING, &parent->state); - pohmelfs_put_inode(parent); - - wake_up(&st->psb->wait); - - return 0; - -err_out_put: - pohmelfs_put_inode(parent); -err_out_exit: - clear_bit(NETFS_COMMAND_PENDING, &parent->state); - wake_up(&st->psb->wait); - printk("%s: inode: %p, id: %llu, start: %llu, size: %u, err: %d.\n", - __func__, inode, cmd->id, cmd->start, cmd->size, err); - return err; -} - -/* - * Create response, just marks local inode as 'created', so that writeback - * for any of its children (or own) would not try to sync it again. - */ -static int pohmelfs_create_response(struct netfs_state *st) -{ - struct inode *inode; - struct netfs_cmd *cmd = &st->cmd; - struct pohmelfs_inode *pi; - - inode = ilookup(st->psb->sb, cmd->id); - if (!inode) { - printk("%s: failed to find inode: id: %llu, start: %llu.\n", - __func__, cmd->id, cmd->start); - goto err_out_exit; - } - - pi = POHMELFS_I(inode); - - /* - * To lock or not to lock? - * We actually do not care if it races... - */ - if (cmd->start) - make_bad_inode(inode); - set_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state); - - pohmelfs_put_inode(pi); - - wake_up(&st->psb->wait); - return 0; - -err_out_exit: - wake_up(&st->psb->wait); - return -ENOENT; -} - -/* - * Object remove response. Just says that remove request has been received. - * Used in cache coherency protocol. - */ -static int pohmelfs_remove_response(struct netfs_state *st) -{ - struct netfs_cmd *cmd = &st->cmd; - int err; - - err = pohmelfs_data_recv_and_check(st, st->data, cmd->size); - if (err) - return err; - - dprintk("%s: parent: %llu, path: '%s'.\n", __func__, cmd->id, (char *)st->data); - - return 0; -} - -/* - * Transaction reply processing. - * - * Find transaction based on its generation number, bump its reference counter, - * so that none could free it under us, drop from the trees and lists and - * drop reference counter. When it hits zero (when all destinations replied - * and all timeout handled by async scanning code), completion will be called - * and transaction will be freed. - */ -static int pohmelfs_transaction_response(struct netfs_state *st) -{ - struct netfs_trans_dst *dst; - struct netfs_trans *t = NULL; - struct netfs_cmd *cmd = &st->cmd; - short err = (signed)cmd->ext; - - mutex_lock(&st->trans_lock); - dst = netfs_trans_search(st, cmd->start); - if (dst) { - netfs_trans_remove_nolock(dst, st); - t = dst->trans; - } - mutex_unlock(&st->trans_lock); - - if (!t) { - printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n", - __func__, cmd->start, cmd->id, cmd->size, cmd->ext); - err = -EINVAL; - goto out; - } - - t->result = err; - netfs_trans_drop_dst_nostate(dst); - -out: - wake_up(&st->psb->wait); - return err; -} - -/* - * Inode metadata cache coherency message. - */ -static int pohmelfs_page_cache_response(struct netfs_state *st) -{ - struct netfs_cmd *cmd = &st->cmd; - struct inode *inode; - - dprintk("%s: st: %p, id: %llu, start: %llu, size: %u.\n", __func__, st, cmd->id, cmd->start, cmd->size); - - inode = ilookup(st->psb->sb, cmd->id); - if (!inode) { - printk("%s: failed to find inode: id: %llu.\n", __func__, cmd->id); - return -ENOENT; - } - - set_bit(NETFS_INODE_NEED_FLUSH, &POHMELFS_I(inode)->state); - pohmelfs_put_inode(POHMELFS_I(inode)); - - return 0; -} - -/* - * Root capabilities response: export statistics - * like used and available size, number of files and dirs, - * permissions. - */ -static int pohmelfs_root_cap_response(struct netfs_state *st) -{ - struct netfs_cmd *cmd = &st->cmd; - struct netfs_root_capabilities *cap; - struct pohmelfs_sb *psb = st->psb; - - if (cmd->size != sizeof(struct netfs_root_capabilities)) { - psb->flags = EPROTO; - wake_up(&psb->wait); - return -EPROTO; - } - - cap = st->data; - - netfs_convert_root_capabilities(cap); - - if (psb->total_size < cap->used + cap->avail) - psb->total_size = cap->used + cap->avail; - if (cap->avail) - psb->avail_size = cap->avail; - psb->state_flags = cap->flags; - - if (psb->state_flags & POHMELFS_FLAGS_RO) { - psb->sb->s_flags |= MS_RDONLY; - printk(KERN_INFO "Mounting POHMELFS (%d) read-only.\n", psb->idx); - } - - if (psb->state_flags & POHMELFS_FLAGS_XATTR) - printk(KERN_INFO "Mounting POHMELFS (%d) " - "with extended attributes support.\n", psb->idx); - - if (atomic_long_read(&psb->total_inodes) <= 1) - atomic_long_set(&psb->total_inodes, cap->nr_files); - - dprintk("%s: total: %llu, avail: %llu, flags: %llx, inodes: %llu.\n", - __func__, psb->total_size, psb->avail_size, psb->state_flags, cap->nr_files); - - psb->flags = 0; - wake_up(&psb->wait); - return 0; -} - -/* - * Crypto capabilities of the server, where it says that - * it supports or does not requested hash/cipher algorithms. - */ -static int pohmelfs_crypto_cap_response(struct netfs_state *st) -{ - struct netfs_cmd *cmd = &st->cmd; - struct netfs_crypto_capabilities *cap; - struct pohmelfs_sb *psb = st->psb; - int err = 0; - - if (cmd->size != sizeof(struct netfs_crypto_capabilities)) { - psb->flags = EPROTO; - wake_up(&psb->wait); - return -EPROTO; - } - - cap = st->data; - - dprintk("%s: cipher '%s': %s, hash: '%s': %s.\n", - __func__, - psb->cipher_string, (cap->cipher_strlen) ? "SUPPORTED" : "NOT SUPPORTED", - psb->hash_string, (cap->hash_strlen) ? "SUPPORTED" : "NOT SUPPORTED"); - - if (!cap->hash_strlen) { - if (psb->hash_strlen && psb->crypto_fail_unsupported) - err = -ENOTSUPP; - psb->hash_strlen = 0; - kfree(psb->hash_string); - psb->hash_string = NULL; - } - - if (!cap->cipher_strlen) { - if (psb->cipher_strlen && psb->crypto_fail_unsupported) - err = -ENOTSUPP; - psb->cipher_strlen = 0; - kfree(psb->cipher_string); - psb->cipher_string = NULL; - } - - return err; -} - -/* - * Capabilities handshake response. - */ -static int pohmelfs_capabilities_response(struct netfs_state *st) -{ - struct netfs_cmd *cmd = &st->cmd; - int err = 0; - - err = pohmelfs_data_recv(st, st->data, cmd->size); - if (err) - return err; - - switch (cmd->id) { - case POHMELFS_CRYPTO_CAPABILITIES: - return pohmelfs_crypto_cap_response(st); - case POHMELFS_ROOT_CAPABILITIES: - return pohmelfs_root_cap_response(st); - default: - break; - } - return -EINVAL; -} - -/* - * Receiving extended attribute. - * Does not work properly if received size is more than requested one, - * it should not happen with current request/reply model though. - */ -static int pohmelfs_getxattr_response(struct netfs_state *st) -{ - struct pohmelfs_sb *psb = st->psb; - struct netfs_cmd *cmd = &st->cmd; - struct pohmelfs_mcache *m; - short error = (signed short)cmd->ext, err; - unsigned int sz, total_size; - - m = pohmelfs_mcache_search(psb, cmd->id); - - dprintk("%s: id: %llu, gen: %llu, err: %d.\n", - __func__, cmd->id, (m) ? m->gen : 0, error); - - if (!m) { - printk("%s: failed to find getxattr cache entry: id: %llu.\n", __func__, cmd->id); - return -ENOENT; - } - - if (cmd->size) { - sz = min_t(unsigned int, cmd->size, m->size); - err = pohmelfs_data_recv_and_check(st, m->data, sz); - if (err) { - error = err; - goto out; - } - - m->size = sz; - total_size = cmd->size - sz; - - while (total_size) { - sz = min(total_size, st->size); - - err = pohmelfs_data_recv_and_check(st, st->data, sz); - if (err) { - error = err; - break; - } - - total_size -= sz; - } - } - -out: - m->err = error; - complete(&m->complete); - pohmelfs_mcache_put(psb, m); - - return error; -} - -int pohmelfs_data_lock_response(struct netfs_state *st) -{ - struct pohmelfs_sb *psb = st->psb; - struct netfs_cmd *cmd = &st->cmd; - struct pohmelfs_mcache *m; - short err = (signed short)cmd->ext; - u64 id = cmd->id; - - m = pohmelfs_mcache_search(psb, id); - - dprintk("%s: id: %llu, gen: %llu, err: %d.\n", - __func__, cmd->id, (m) ? m->gen : 0, err); - - if (!m) { - pohmelfs_data_recv(st, st->data, cmd->size); - printk("%s: failed to find data lock response: id: %llu.\n", __func__, cmd->id); - return -ENOENT; - } - - if (cmd->size) - err = pohmelfs_data_recv_and_check(st, &m->info, cmd->size); - - m->err = err; - complete(&m->complete); - pohmelfs_mcache_put(psb, m); - - return err; -} - -static void __inline__ netfs_state_reset(struct netfs_state *st) -{ - netfs_state_lock_send(st); - netfs_state_exit(st); - netfs_state_init(st); - netfs_state_unlock_send(st); -} - -/* - * Main receiving function, called from dedicated kernel thread. - */ -static int pohmelfs_recv(void *data) -{ - int err = -EINTR; - struct netfs_state *st = data; - struct netfs_cmd *cmd = &st->cmd; - - while (!kthread_should_stop()) { - /* - * If socket will be reset after this statement, then - * pohmelfs_data_recv() will just fail and loop will - * start again, so it can be done without any locks. - * - * st->read_socket is needed to prevents state machine - * breaking between this data reading and subsequent one - * in protocol specific functions during connection reset. - * In case of reset we have to read next command and do - * not expect data for old command to magically appear in - * new connection. - */ - st->read_socket = st->socket; - err = pohmelfs_data_recv(st, cmd, sizeof(struct netfs_cmd)); - if (err) { - msleep(1000); - continue; - } - - netfs_convert_cmd(cmd); - - dprintk("%s: cmd: %u, id: %llu, start: %llu, size: %u, " - "ext: %u, csize: %u, cpad: %u.\n", - __func__, cmd->cmd, cmd->id, cmd->start, - cmd->size, cmd->ext, cmd->csize, cmd->cpad); - - if (cmd->csize) { - struct pohmelfs_crypto_engine *e = &st->eng; - - if (unlikely(cmd->csize > e->size/2)) { - netfs_state_reset(st); - continue; - } - - if (e->hash && unlikely(cmd->csize != st->psb->crypto_attached_size)) { - dprintk("%s: cmd: cmd: %u, id: %llu, start: %llu, size: %u, " - "csize: %u != digest size %u.\n", - __func__, cmd->cmd, cmd->id, cmd->start, cmd->size, - cmd->csize, st->psb->crypto_attached_size); - netfs_state_reset(st); - continue; - } - - err = pohmelfs_data_recv(st, e->data, cmd->csize); - if (err) { - netfs_state_reset(st); - continue; - } - -#ifdef CONFIG_POHMELFS_DEBUG - { - unsigned int i; - unsigned char *hash = e->data; - - dprintk("%s: received hash: ", __func__); - for (i = 0; i < cmd->csize; ++i) - printk("%02x ", hash[i]); - - printk("\n"); - } -#endif - cmd->size -= cmd->csize; - } - - /* - * This should catch protocol breakage and random garbage instead of commands. - */ - if (unlikely((cmd->size > st->size) && (cmd->cmd != NETFS_XATTR_GET))) { - netfs_state_reset(st); - continue; - } - - switch (cmd->cmd) { - case NETFS_READ_PAGE: - err = pohmelfs_read_page_response(st); - break; - case NETFS_READDIR: - err = pohmelfs_readdir_response(st); - break; - case NETFS_LOOKUP: - err = pohmelfs_lookup_response(st); - break; - case NETFS_CREATE: - err = pohmelfs_create_response(st); - break; - case NETFS_REMOVE: - err = pohmelfs_remove_response(st); - break; - case NETFS_TRANS: - err = pohmelfs_transaction_response(st); - break; - case NETFS_PAGE_CACHE: - err = pohmelfs_page_cache_response(st); - break; - case NETFS_CAPABILITIES: - err = pohmelfs_capabilities_response(st); - break; - case NETFS_LOCK: - err = pohmelfs_data_lock_response(st); - break; - case NETFS_XATTR_GET: - err = pohmelfs_getxattr_response(st); - break; - default: - printk("%s: wrong cmd: %u, id: %llu, start: %llu, size: %u, ext: %u.\n", - __func__, cmd->cmd, cmd->id, cmd->start, cmd->size, cmd->ext); - netfs_state_reset(st); - break; - } - } - - while (!kthread_should_stop()) - schedule_timeout_uninterruptible(msecs_to_jiffies(10)); - - return err; -} - -int netfs_state_init(struct netfs_state *st) -{ - int err; - struct pohmelfs_ctl *ctl = &st->ctl; - - err = sock_create(ctl->addr.sa_family, ctl->type, ctl->proto, &st->socket); - if (err) { - printk("%s: failed to create a socket: family: %d, type: %d, proto: %d, err: %d.\n", - __func__, ctl->addr.sa_family, ctl->type, ctl->proto, err); - goto err_out_exit; - } - - st->socket->sk->sk_allocation = GFP_NOIO; - st->socket->sk->sk_sndtimeo = st->socket->sk->sk_rcvtimeo = msecs_to_jiffies(60000); - - err = kernel_connect(st->socket, (struct sockaddr *)&ctl->addr, ctl->addrlen, 0); - if (err) { - printk("%s: failed to connect to server: idx: %u, err: %d.\n", - __func__, st->psb->idx, err); - goto err_out_release; - } - st->socket->sk->sk_sndtimeo = st->socket->sk->sk_rcvtimeo = msecs_to_jiffies(60000); - - err = netfs_poll_init(st); - if (err) - goto err_out_release; - - if (st->socket->ops->family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)&ctl->addr; - printk(KERN_INFO "%s: (re)connected to peer %pi4:%d.\n", __func__, - &sin->sin_addr.s_addr, ntohs(sin->sin_port)); - } else if (st->socket->ops->family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&ctl->addr; - printk(KERN_INFO "%s: (re)connected to peer %pi6:%d", __func__, - &sin->sin6_addr, ntohs(sin->sin6_port)); - } - - return 0; - -err_out_release: - sock_release(st->socket); -err_out_exit: - st->socket = NULL; - return err; -} - -void netfs_state_exit(struct netfs_state *st) -{ - if (st->socket) { - netfs_poll_exit(st); - st->socket->ops->shutdown(st->socket, 2); - - if (st->socket->ops->family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr; - printk(KERN_INFO "%s: disconnected from peer %pi4:%d.\n", __func__, - &sin->sin_addr.s_addr, ntohs(sin->sin_port)); - } else if (st->socket->ops->family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr; - printk(KERN_INFO "%s: disconnected from peer %pi6:%d", __func__, - &sin->sin6_addr, ntohs(sin->sin6_port)); - } - - sock_release(st->socket); - st->socket = NULL; - st->read_socket = NULL; - st->need_reset = 0; - } -} - -int pohmelfs_state_init_one(struct pohmelfs_sb *psb, struct pohmelfs_config *conf) -{ - struct netfs_state *st = &conf->state; - int err = -ENOMEM; - - mutex_init(&st->__state_lock); - mutex_init(&st->__state_send_lock); - init_waitqueue_head(&st->thread_wait); - - st->psb = psb; - st->trans_root = RB_ROOT; - mutex_init(&st->trans_lock); - - st->size = psb->trans_data_size; - st->data = kmalloc(st->size, GFP_KERNEL); - if (!st->data) - goto err_out_exit; - - if (psb->perform_crypto) { - err = pohmelfs_crypto_engine_init(&st->eng, psb); - if (err) - goto err_out_free_data; - } - - err = netfs_state_init(st); - if (err) - goto err_out_free_engine; - - st->thread = kthread_run(pohmelfs_recv, st, "pohmelfs/%u", psb->idx); - if (IS_ERR(st->thread)) { - err = PTR_ERR(st->thread); - goto err_out_netfs_exit; - } - - if (!psb->active_state) - psb->active_state = conf; - - dprintk("%s: conf: %p, st: %p, socket: %p.\n", - __func__, conf, st, st->socket); - return 0; - -err_out_netfs_exit: - netfs_state_exit(st); -err_out_free_engine: - pohmelfs_crypto_engine_exit(&st->eng); -err_out_free_data: - kfree(st->data); -err_out_exit: - return err; - -} - -void pohmelfs_state_flush_transactions(struct netfs_state *st) -{ - struct rb_node *rb_node; - struct netfs_trans_dst *dst; - - mutex_lock(&st->trans_lock); - for (rb_node = rb_first(&st->trans_root); rb_node; ) { - dst = rb_entry(rb_node, struct netfs_trans_dst, state_entry); - rb_node = rb_next(rb_node); - - dst->trans->result = -EINVAL; - netfs_trans_remove_nolock(dst, st); - netfs_trans_drop_dst_nostate(dst); - } - mutex_unlock(&st->trans_lock); -} - -static void pohmelfs_state_exit_one(struct pohmelfs_config *c) -{ - struct netfs_state *st = &c->state; - - dprintk("%s: exiting, st: %p.\n", __func__, st); - if (st->thread) { - kthread_stop(st->thread); - st->thread = NULL; - } - - netfs_state_lock_send(st); - netfs_state_exit(st); - netfs_state_unlock_send(st); - - pohmelfs_state_flush_transactions(st); - - pohmelfs_crypto_engine_exit(&st->eng); - kfree(st->data); - - kfree(c); -} - -/* - * Initialize network stack. It searches for given ID in global - * configuration table, this contains information of the remote server - * (address (any supported by socket interface) and port, protocol and so on). - */ -int pohmelfs_state_init(struct pohmelfs_sb *psb) -{ - int err = -ENOMEM; - - err = pohmelfs_copy_config(psb); - if (err) { - pohmelfs_state_exit(psb); - return err; - } - - return 0; -} - -void pohmelfs_state_exit(struct pohmelfs_sb *psb) -{ - struct pohmelfs_config *c, *tmp; - - list_for_each_entry_safe(c, tmp, &psb->state_list, config_entry) { - list_del(&c->config_entry); - pohmelfs_state_exit_one(c); - } -} - -void pohmelfs_switch_active(struct pohmelfs_sb *psb) -{ - struct pohmelfs_config *c = psb->active_state; - - if (!list_empty(&psb->state_list)) { - if (c->config_entry.next != &psb->state_list) { - psb->active_state = list_entry(c->config_entry.next, - struct pohmelfs_config, config_entry); - } else { - psb->active_state = list_entry(psb->state_list.next, - struct pohmelfs_config, config_entry); - } - - dprintk("%s: empty: %d, active %p -> %p.\n", - __func__, list_empty(&psb->state_list), c, - psb->active_state); - } else - psb->active_state = NULL; -} - -void pohmelfs_check_states(struct pohmelfs_sb *psb) -{ - struct pohmelfs_config *c, *tmp; - LIST_HEAD(delete_list); - - mutex_lock(&psb->state_lock); - list_for_each_entry_safe(c, tmp, &psb->state_list, config_entry) { - if (pohmelfs_config_check(c, psb->idx)) { - - if (psb->active_state == c) - pohmelfs_switch_active(psb); - list_move(&c->config_entry, &delete_list); - } - } - pohmelfs_copy_config(psb); - mutex_unlock(&psb->state_lock); - - list_for_each_entry_safe(c, tmp, &delete_list, config_entry) { - list_del(&c->config_entry); - pohmelfs_state_exit_one(c); - } -} diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h deleted file mode 100644 index f26894f2a57f..000000000000 --- a/drivers/staging/pohmelfs/netfs.h +++ /dev/null @@ -1,919 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __NETFS_H -#define __NETFS_H - -#include -#include -#include - -#define POHMELFS_CN_IDX 5 -#define POHMELFS_CN_VAL 0 - -#define POHMELFS_CTLINFO_ACK 1 -#define POHMELFS_NOINFO_ACK 2 - -#define POHMELFS_NULL_IDX 65535 - -/* - * Network command structure. - * Will be extended. - */ -struct netfs_cmd { - __u16 cmd; /* Command number */ - __u16 csize; /* Attached crypto information size */ - __u16 cpad; /* Attached padding size */ - __u16 ext; /* External flags */ - __u32 size; /* Size of the attached data */ - __u32 trans; /* Transaction id */ - __u64 id; /* Object ID to operate on. Used for feedback.*/ - __u64 start; /* Start of the object. */ - __u64 iv; /* IV sequence */ - __u8 data[0]; -}; - -static inline void netfs_convert_cmd(struct netfs_cmd *cmd) -{ - cmd->id = __be64_to_cpu(cmd->id); - cmd->start = __be64_to_cpu(cmd->start); - cmd->iv = __be64_to_cpu(cmd->iv); - cmd->cmd = __be16_to_cpu(cmd->cmd); - cmd->ext = __be16_to_cpu(cmd->ext); - cmd->csize = __be16_to_cpu(cmd->csize); - cmd->cpad = __be16_to_cpu(cmd->cpad); - cmd->size = __be32_to_cpu(cmd->size); -} - -#define NETFS_TRANS_SINGLE_DST (1<<0) - -enum { - NETFS_READDIR = 1, /* Read directory for given inode number */ - NETFS_READ_PAGE, /* Read data page from the server */ - NETFS_WRITE_PAGE, /* Write data page to the server */ - NETFS_CREATE, /* Create directory entry */ - NETFS_REMOVE, /* Remove directory entry */ - - NETFS_LOOKUP, /* Lookup single object */ - NETFS_LINK, /* Create a link */ - NETFS_TRANS, /* Transaction */ - NETFS_OPEN, /* Open intent */ - NETFS_INODE_INFO, /* Metadata cache coherency synchronization message */ - - NETFS_PAGE_CACHE, /* Page cache invalidation message */ - NETFS_READ_PAGES, /* Read multiple contiguous pages in one go */ - NETFS_RENAME, /* Rename object */ - NETFS_CAPABILITIES, /* Capabilities of the client, for example supported crypto */ - NETFS_LOCK, /* Distributed lock message */ - - NETFS_XATTR_SET, /* Set extended attribute */ - NETFS_XATTR_GET, /* Get extended attribute */ - NETFS_CMD_MAX -}; - -enum { - POHMELFS_FLAGS_ADD = 0, /* Network state control message for ADD */ - POHMELFS_FLAGS_DEL, /* Network state control message for DEL */ - POHMELFS_FLAGS_SHOW, /* Network state control message for SHOW */ - POHMELFS_FLAGS_CRYPTO, /* Crypto data control message */ - POHMELFS_FLAGS_MODIFY, /* Network state modification message */ - POHMELFS_FLAGS_DUMP, /* Network state control message for SHOW ALL */ - POHMELFS_FLAGS_FLUSH, /* Network state control message for FLUSH */ -}; - -/* - * Always wanted to copy it from socket headers into public one, - * since they are __KERNEL__ protected there. - */ -#define _K_SS_MAXSIZE 128 - -struct saddr { - unsigned short sa_family; - char addr[_K_SS_MAXSIZE]; -}; - -enum { - POHMELFS_CRYPTO_HASH = 0, - POHMELFS_CRYPTO_CIPHER, -}; - -struct pohmelfs_crypto { - unsigned int idx; /* Config index */ - unsigned short strlen; /* Size of the attached crypto string including 0-byte - * "cbc(aes)" for example */ - unsigned short type; /* HMAC, cipher, both */ - unsigned int keysize; /* Key size */ - unsigned char data[0]; /* Algorithm string, key and IV */ -}; - -#define POHMELFS_IO_PERM_READ (1<<0) -#define POHMELFS_IO_PERM_WRITE (1<<1) - -/* - * Configuration command used to create table of different remote servers. - */ -struct pohmelfs_ctl { - __u32 idx; /* Config index */ - __u32 type; /* Socket type */ - __u32 proto; /* Socket protocol */ - __u16 addrlen; /* Size of the address */ - __u16 perm; /* IO permission */ - __u16 prio; /* IO priority */ - struct saddr addr; /* Remote server address */ -}; - -/* - * Ack for userspace about requested command. - */ -struct pohmelfs_cn_ack { - struct cn_msg msg; - int error; - int msg_num; - int unused[3]; - struct pohmelfs_ctl ctl; -}; - -/* - * Inode info structure used to sync with server. - * Check what stat() returns. - */ -struct netfs_inode_info { - unsigned int mode; - unsigned int nlink; - unsigned int uid; - unsigned int gid; - unsigned int blocksize; - unsigned int padding; - __u64 ino; - __u64 blocks; - __u64 rdev; - __u64 size; - __u64 version; -}; - -static inline void netfs_convert_inode_info(struct netfs_inode_info *info) -{ - info->mode = __cpu_to_be32(info->mode); - info->nlink = __cpu_to_be32(info->nlink); - info->uid = __cpu_to_be32(info->uid); - info->gid = __cpu_to_be32(info->gid); - info->blocksize = __cpu_to_be32(info->blocksize); - info->blocks = __cpu_to_be64(info->blocks); - info->rdev = __cpu_to_be64(info->rdev); - info->size = __cpu_to_be64(info->size); - info->version = __cpu_to_be64(info->version); - info->ino = __cpu_to_be64(info->ino); -} - -/* - * Cache state machine. - */ -enum { - NETFS_COMMAND_PENDING = 0, /* Command is being executed */ - NETFS_INODE_REMOTE_SYNCED, /* Inode was synced to server */ - NETFS_INODE_REMOTE_DIR_SYNCED, /* Inode (directory) was synced from the server */ - NETFS_INODE_OWNED, /* Inode is owned by given host */ - NETFS_INODE_NEED_FLUSH, /* Inode has to be flushed to the server */ -}; - -/* - * POHMELFS capabilities: information about supported - * crypto operations (hash/cipher, modes, key sizes and so on), - * root information (used/available size, number of objects, permissions) - */ -enum pohmelfs_capabilities { - POHMELFS_CRYPTO_CAPABILITIES = 0, - POHMELFS_ROOT_CAPABILITIES, -}; - -/* Read-only mount */ -#define POHMELFS_FLAGS_RO (1<<0) -/* Extended attributes support on/off */ -#define POHMELFS_FLAGS_XATTR (1<<1) - -struct netfs_root_capabilities { - __u64 nr_files; - __u64 used, avail; - __u64 flags; -}; - -static inline void netfs_convert_root_capabilities(struct netfs_root_capabilities *cap) -{ - cap->nr_files = __cpu_to_be64(cap->nr_files); - cap->used = __cpu_to_be64(cap->used); - cap->avail = __cpu_to_be64(cap->avail); - cap->flags = __cpu_to_be64(cap->flags); -} - -struct netfs_crypto_capabilities { - unsigned short hash_strlen; /* Hash string length, like "hmac(sha1) including 0 byte "*/ - unsigned short cipher_strlen; /* Cipher string length with the same format */ - unsigned int cipher_keysize; /* Cipher key size */ -}; - -static inline void netfs_convert_crypto_capabilities(struct netfs_crypto_capabilities *cap) -{ - cap->hash_strlen = __cpu_to_be16(cap->hash_strlen); - cap->cipher_strlen = __cpu_to_be16(cap->cipher_strlen); - cap->cipher_keysize = __cpu_to_be32(cap->cipher_keysize); -} - -enum pohmelfs_lock_type { - POHMELFS_LOCK_GRAB = (1<<15), - - POHMELFS_READ_LOCK = 0, - POHMELFS_WRITE_LOCK, -}; - -struct netfs_lock { - __u64 start; - __u64 ino; - __u32 size; - __u32 type; -}; - -static inline void netfs_convert_lock(struct netfs_lock *lock) -{ - lock->start = __cpu_to_be64(lock->start); - lock->ino = __cpu_to_be64(lock->ino); - lock->size = __cpu_to_be32(lock->size); - lock->type = __cpu_to_be32(lock->type); -} - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* - * Private POHMELFS cache of objects in directory. - */ -struct pohmelfs_name { - struct rb_node hash_node; - - struct list_head sync_create_entry; - - u64 ino; - - u32 hash; - u32 mode; - u32 len; - - char *data; -}; - -/* - * POHMELFS inode. Main object. - */ -struct pohmelfs_inode { - struct list_head inode_entry; /* Entry in superblock list. - * Objects which are not bound to dentry require to be dropped - * in ->put_super() - */ - struct rb_root hash_root; /* The same, but indexed by name hash and len */ - struct mutex offset_lock; /* Protect both above trees */ - - struct list_head sync_create_list; /* List of created but not yet synced to the server children */ - - unsigned int drop_count; - - int lock_type; /* How this inode is locked: read or write */ - - int error; /* Transaction error for given inode */ - - long state; /* State machine above */ - - u64 ino; /* Inode number */ - u64 total_len; /* Total length of all children names, used to create offsets */ - - struct inode vfs_inode; -}; - -struct netfs_trans; -typedef int (*netfs_trans_complete_t)(struct page **pages, unsigned int page_num, - void *private, int err); - -struct netfs_state; -struct pohmelfs_sb; - -struct netfs_trans { - /* - * Transaction header and attached contiguous data live here. - */ - struct iovec iovec; - - /* - * Pages attached to transaction. - */ - struct page **pages; - - /* - * List and protecting lock for transaction destination - * network states. - */ - spinlock_t dst_lock; - struct list_head dst_list; - - /* - * Number of users for given transaction. - * For example each network state attached to transaction - * via dst_list increases it. - */ - atomic_t refcnt; - - /* - * Number of pages attached to given transaction. - * Some slots in above page array can be NULL, since - * for example page can be under writeback already, - * so we skip it in this transaction. - */ - unsigned int page_num; - - /* - * Transaction flags: single dst or broadcast and so on. - */ - unsigned int flags; - - /* - * Size of the data, which can be placed into - * iovec.iov_base area. - */ - unsigned int total_size; - - /* - * Number of pages to be sent to remote server. - * Usually equal to above page_num, but in case of partial - * writeback it can accumulate only pages already completed - * previous writeback. - */ - unsigned int attached_pages; - - /* - * Attached number of bytes in all above pages. - */ - unsigned int attached_size; - - /* - * Unique transacton generation number. - * Used as identity in the network state tree of transactions. - */ - unsigned int gen; - - /* - * Transaction completion status. - */ - int result; - - /* - * Superblock this transaction belongs to - */ - struct pohmelfs_sb *psb; - - /* - * Crypto engine, which processed this transaction. - * Can be not NULL only if crypto engine holds encrypted pages. - */ - struct pohmelfs_crypto_engine *eng; - - /* Private data */ - void *private; - - /* Completion callback, invoked just before transaction is destroyed */ - netfs_trans_complete_t complete; -}; - -static inline int netfs_trans_cur_len(struct netfs_trans *t) -{ - return (signed)(t->total_size - t->iovec.iov_len); -} - -static inline void *netfs_trans_current(struct netfs_trans *t) -{ - return t->iovec.iov_base + t->iovec.iov_len; -} - -struct netfs_trans *netfs_trans_alloc(struct pohmelfs_sb *psb, unsigned int size, - unsigned int flags, unsigned int nr); -void netfs_trans_free(struct netfs_trans *t); -int netfs_trans_finish(struct netfs_trans *t, struct pohmelfs_sb *psb); -int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb); - -static inline void netfs_trans_reset(struct netfs_trans *t) -{ - t->complete = NULL; -} - -struct netfs_trans_dst { - struct list_head trans_entry; - struct rb_node state_entry; - - unsigned long send_time; - - /* - * Times this transaction was resent to its old or new, - * depending on flags, destinations. When it reaches maximum - * allowed number, specified in superblock->trans_retries, - * transaction will be freed with ETIMEDOUT error. - */ - unsigned int retries; - - struct netfs_trans *trans; - struct netfs_state *state; -}; - -struct netfs_trans_dst *netfs_trans_search(struct netfs_state *st, unsigned int gen); -void netfs_trans_drop_dst(struct netfs_trans_dst *dst); -void netfs_trans_drop_dst_nostate(struct netfs_trans_dst *dst); -void netfs_trans_drop_trans(struct netfs_trans *t, struct netfs_state *st); -void netfs_trans_drop_last(struct netfs_trans *t, struct netfs_state *st); -int netfs_trans_resend(struct netfs_trans *t, struct pohmelfs_sb *psb); -int netfs_trans_remove_nolock(struct netfs_trans_dst *dst, struct netfs_state *st); - -int netfs_trans_init(void); -void netfs_trans_exit(void); - -struct pohmelfs_crypto_engine { - u64 iv; /* Crypto IV for current operation */ - unsigned long timeout; /* Crypto waiting timeout */ - unsigned int size; /* Size of crypto scratchpad */ - void *data; /* Temporal crypto scratchpad */ - /* - * Crypto operations performed on objects. - */ - struct crypto_hash *hash; - struct crypto_ablkcipher *cipher; - - struct pohmelfs_crypto_thread *thread; /* Crypto thread which hosts this engine */ - - struct page **pages; - unsigned int page_num; -}; - -struct pohmelfs_crypto_thread { - struct list_head thread_entry; - - struct task_struct *thread; - struct pohmelfs_sb *psb; - - struct pohmelfs_crypto_engine eng; - - struct netfs_trans *trans; - - wait_queue_head_t wait; - int error; - - unsigned int size; - struct page *page; -}; - -void pohmelfs_crypto_thread_make_ready(struct pohmelfs_crypto_thread *th); - -/* - * Network state, attached to one server. - */ -struct netfs_state { - struct mutex __state_lock; /* Can not allow to use the same socket simultaneously */ - struct mutex __state_send_lock; - struct netfs_cmd cmd; /* Cached command */ - struct netfs_inode_info info; /* Cached inode info */ - - void *data; /* Cached some data */ - unsigned int size; /* Size of that data */ - - struct pohmelfs_sb *psb; /* Superblock */ - - struct task_struct *thread; /* Async receiving thread */ - - /* Waiting/polling machinery */ - wait_queue_t wait; - wait_queue_head_t *whead; - wait_queue_head_t thread_wait; - - struct mutex trans_lock; - struct rb_root trans_root; - - struct pohmelfs_ctl ctl; /* Remote peer */ - - struct socket *socket; /* Socket object */ - struct socket *read_socket; /* Cached pointer to socket object. - * Used to determine if between lock drops socket was changed. - * Never used to read data or any kind of access. - */ - /* - * Crypto engines to process incoming data. - */ - struct pohmelfs_crypto_engine eng; - - int need_reset; -}; - -int netfs_state_init(struct netfs_state *st); -void netfs_state_exit(struct netfs_state *st); - -static inline void netfs_state_lock_send(struct netfs_state *st) -{ - mutex_lock(&st->__state_send_lock); -} - -static inline int netfs_state_trylock_send(struct netfs_state *st) -{ - return mutex_trylock(&st->__state_send_lock); -} - -static inline void netfs_state_unlock_send(struct netfs_state *st) -{ - BUG_ON(!mutex_is_locked(&st->__state_send_lock)); - - mutex_unlock(&st->__state_send_lock); -} - -static inline void netfs_state_lock(struct netfs_state *st) -{ - mutex_lock(&st->__state_lock); -} - -static inline void netfs_state_unlock(struct netfs_state *st) -{ - BUG_ON(!mutex_is_locked(&st->__state_lock)); - - mutex_unlock(&st->__state_lock); -} - -static inline unsigned int netfs_state_poll(struct netfs_state *st) -{ - unsigned int revents = POLLHUP | POLLERR; - - netfs_state_lock(st); - if (st->socket) - revents = st->socket->ops->poll(NULL, st->socket, NULL); - netfs_state_unlock(st); - - return revents; -} - -struct pohmelfs_config; - -struct pohmelfs_sb { - struct rb_root mcache_root; - struct mutex mcache_lock; - atomic_long_t mcache_gen; - unsigned long mcache_timeout; - - unsigned int idx; - - unsigned int trans_retries; - - atomic_t trans_gen; - - unsigned int crypto_attached_size; - unsigned int crypto_align_size; - - unsigned int crypto_fail_unsupported; - - unsigned int crypto_thread_num; - struct list_head crypto_active_list, crypto_ready_list; - struct mutex crypto_thread_lock; - - unsigned int trans_max_pages; - unsigned long trans_data_size; - unsigned long trans_timeout; - - unsigned long drop_scan_timeout; - unsigned long trans_scan_timeout; - - unsigned long wait_on_page_timeout; - - struct list_head flush_list; - struct list_head drop_list; - spinlock_t ino_lock; - u64 ino; - - /* - * Remote nodes POHMELFS connected to. - */ - struct list_head state_list; - struct mutex state_lock; - - /* - * Currently active state to request data from. - */ - struct pohmelfs_config *active_state; - - - wait_queue_head_t wait; - - /* - * Timed checks: stale transactions, inodes to be freed and so on. - */ - struct delayed_work dwork; - struct delayed_work drop_dwork; - - struct super_block *sb; - - struct backing_dev_info bdi; - - /* - * Algorithm strings. - */ - char *hash_string; - char *cipher_string; - - u8 *hash_key; - u8 *cipher_key; - - /* - * Algorithm string lengths. - */ - unsigned int hash_strlen; - unsigned int cipher_strlen; - unsigned int hash_keysize; - unsigned int cipher_keysize; - - /* - * Controls whether to perfrom crypto processing or not. - */ - int perform_crypto; - - /* - * POHMELFS statistics. - */ - u64 total_size; - u64 avail_size; - atomic_long_t total_inodes; - - /* - * Xattr support, read-only and so on. - */ - u64 state_flags; - - /* - * Temporary storage to detect changes in the wait queue. - */ - long flags; -}; - -static inline void netfs_trans_update(struct netfs_cmd *cmd, - struct netfs_trans *t, unsigned int size) -{ - unsigned int sz = ALIGN(size, t->psb->crypto_align_size); - - t->iovec.iov_len += sizeof(struct netfs_cmd) + sz; - cmd->cpad = __cpu_to_be16(sz - size); -} - -static inline struct pohmelfs_sb *POHMELFS_SB(struct super_block *sb) -{ - return sb->s_fs_info; -} - -static inline struct pohmelfs_inode *POHMELFS_I(struct inode *inode) -{ - return container_of(inode, struct pohmelfs_inode, vfs_inode); -} - -static inline u64 pohmelfs_new_ino(struct pohmelfs_sb *psb) -{ - u64 ino; - - spin_lock(&psb->ino_lock); - ino = psb->ino++; - spin_unlock(&psb->ino_lock); - - return ino; -} - -static inline void pohmelfs_put_inode(struct pohmelfs_inode *pi) -{ - struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb); - - spin_lock(&psb->ino_lock); - list_move_tail(&pi->inode_entry, &psb->drop_list); - pi->drop_count++; - spin_unlock(&psb->ino_lock); -} - -struct pohmelfs_config { - struct list_head config_entry; - - struct netfs_state state; -}; - -struct pohmelfs_config_group { - /* - * Entry in the global config group list. - */ - struct list_head group_entry; - - /* - * Index of the current group. - */ - unsigned int idx; - /* - * Number of config_list entries in this group entry. - */ - unsigned int num_entry; - /* - * Algorithm strings. - */ - char *hash_string; - char *cipher_string; - - /* - * Algorithm string lengths. - */ - unsigned int hash_strlen; - unsigned int cipher_strlen; - - /* - * Key and its size. - */ - unsigned int hash_keysize; - unsigned int cipher_keysize; - u8 *hash_key; - u8 *cipher_key; - - /* - * List of config entries (network state info) for given idx. - */ - struct list_head config_list; -}; - -int __init pohmelfs_config_init(void); -void pohmelfs_config_exit(void); -int pohmelfs_copy_config(struct pohmelfs_sb *psb); -int pohmelfs_copy_crypto(struct pohmelfs_sb *psb); -int pohmelfs_config_check(struct pohmelfs_config *config, int idx); -int pohmelfs_state_init_one(struct pohmelfs_sb *psb, struct pohmelfs_config *conf); - -extern const struct file_operations pohmelfs_dir_fops; -extern const struct inode_operations pohmelfs_dir_inode_ops; - -int pohmelfs_state_init(struct pohmelfs_sb *psb); -void pohmelfs_state_exit(struct pohmelfs_sb *psb); -void pohmelfs_state_flush_transactions(struct netfs_state *st); - -void pohmelfs_fill_inode(struct inode *inode, struct netfs_inode_info *info); - -void pohmelfs_name_del(struct pohmelfs_inode *parent, struct pohmelfs_name *n); -void pohmelfs_free_names(struct pohmelfs_inode *parent); -struct pohmelfs_name *pohmelfs_search_hash(struct pohmelfs_inode *pi, u32 hash); - -void pohmelfs_inode_del_inode(struct pohmelfs_sb *psb, struct pohmelfs_inode *pi); - -struct pohmelfs_inode *pohmelfs_create_entry_local(struct pohmelfs_sb *psb, - struct pohmelfs_inode *parent, struct qstr *str, u64 start, umode_t mode); - -int pohmelfs_write_create_inode(struct pohmelfs_inode *pi); - -int pohmelfs_write_inode_create(struct inode *inode, struct netfs_trans *trans); -int pohmelfs_remove_child(struct pohmelfs_inode *parent, struct pohmelfs_name *n); - -struct pohmelfs_inode *pohmelfs_new_inode(struct pohmelfs_sb *psb, - struct pohmelfs_inode *parent, struct qstr *str, - struct netfs_inode_info *info, int link); - -int pohmelfs_setattr(struct dentry *dentry, struct iattr *attr); -int pohmelfs_setattr_raw(struct inode *inode, struct iattr *attr); - -int pohmelfs_meta_command(struct pohmelfs_inode *pi, unsigned int cmd_op, unsigned int flags, - netfs_trans_complete_t complete, void *priv, u64 start); -int pohmelfs_meta_command_data(struct pohmelfs_inode *pi, u64 id, unsigned int cmd_op, char *addon, - unsigned int flags, netfs_trans_complete_t complete, void *priv, u64 start); - -void pohmelfs_check_states(struct pohmelfs_sb *psb); -void pohmelfs_switch_active(struct pohmelfs_sb *psb); - -int pohmelfs_construct_path_string(struct pohmelfs_inode *pi, void *data, int len); -int pohmelfs_path_length(struct pohmelfs_inode *pi); - -struct pohmelfs_crypto_completion { - struct completion complete; - int error; -}; - -int pohmelfs_trans_crypt(struct netfs_trans *t, struct pohmelfs_sb *psb); -void pohmelfs_crypto_exit(struct pohmelfs_sb *psb); -int pohmelfs_crypto_init(struct pohmelfs_sb *psb); - -int pohmelfs_crypto_engine_init(struct pohmelfs_crypto_engine *e, struct pohmelfs_sb *psb); -void pohmelfs_crypto_engine_exit(struct pohmelfs_crypto_engine *e); - -int pohmelfs_crypto_process_input_data(struct pohmelfs_crypto_engine *e, u64 iv, - void *data, struct page *page, unsigned int size); -int pohmelfs_crypto_process_input_page(struct pohmelfs_crypto_engine *e, - struct page *page, unsigned int size, u64 iv); - -static inline u64 pohmelfs_gen_iv(struct netfs_trans *t) -{ - u64 iv = t->gen; - - iv <<= 32; - iv |= ((unsigned long)t) & 0xffffffff; - - return iv; -} - -int pohmelfs_data_lock(struct pohmelfs_inode *pi, u64 start, u32 size, int type); -int pohmelfs_data_unlock(struct pohmelfs_inode *pi, u64 start, u32 size, int type); -int pohmelfs_data_lock_response(struct netfs_state *st); - -static inline int pohmelfs_need_lock(struct pohmelfs_inode *pi, int type) -{ - if (test_bit(NETFS_INODE_OWNED, &pi->state)) { - if (type == pi->lock_type) - return 0; - if ((type == POHMELFS_READ_LOCK) && (pi->lock_type == POHMELFS_WRITE_LOCK)) - return 0; - } - - if (!test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state)) - return 0; - - return 1; -} - -int __init pohmelfs_mcache_init(void); -void pohmelfs_mcache_exit(void); - -/* #define CONFIG_POHMELFS_DEBUG */ - -#ifdef CONFIG_POHMELFS_DEBUG -#define dprintka(f, a...) printk(f, ##a) -#define dprintk(f, a...) printk("%d: " f, task_pid_vnr(current), ##a) -#else -#define dprintka(f, a...) do {} while (0) -#define dprintk(f, a...) do {} while (0) -#endif - -static inline void netfs_trans_get(struct netfs_trans *t) -{ - atomic_inc(&t->refcnt); -} - -static inline void netfs_trans_put(struct netfs_trans *t) -{ - if (atomic_dec_and_test(&t->refcnt)) { - dprintk("%s: t: %p, gen: %u, err: %d.\n", - __func__, t, t->gen, t->result); - if (t->complete) - t->complete(t->pages, t->page_num, - t->private, t->result); - netfs_trans_free(t); - } -} - -struct pohmelfs_mcache { - struct rb_node mcache_entry; - struct completion complete; - - atomic_t refcnt; - - u64 gen; - - void *data; - u64 start; - u32 size; - int err; - - struct netfs_inode_info info; -}; - -struct pohmelfs_mcache *pohmelfs_mcache_alloc(struct pohmelfs_sb *psb, u64 start, - unsigned int size, void *data); -void pohmelfs_mcache_free(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m); -struct pohmelfs_mcache *pohmelfs_mcache_search(struct pohmelfs_sb *psb, u64 gen); -void pohmelfs_mcache_remove_locked(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m); - -static inline void pohmelfs_mcache_get(struct pohmelfs_mcache *m) -{ - atomic_inc(&m->refcnt); -} - -static inline void pohmelfs_mcache_put(struct pohmelfs_sb *psb, - struct pohmelfs_mcache *m) -{ - if (atomic_dec_and_test(&m->refcnt)) - pohmelfs_mcache_free(psb, m); -} - -/*#define POHMELFS_TRUNCATE_ON_INODE_FLUSH - */ - -#endif /* __KERNEL__*/ - -#endif /* __NETFS_H */ diff --git a/drivers/staging/pohmelfs/path_entry.c b/drivers/staging/pohmelfs/path_entry.c deleted file mode 100644 index 400a9fc386ad..000000000000 --- a/drivers/staging/pohmelfs/path_entry.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "netfs.h" - -#define UNHASHED_OBSCURE_STRING_SIZE sizeof(" (deleted)") - -/* - * Create path from root for given inode. - * Path is formed as set of stuctures, containing name of the object - * and its inode data (mode, permissions and so on). - */ -int pohmelfs_construct_path_string(struct pohmelfs_inode *pi, void *data, int len) -{ - struct path path; - struct dentry *d; - char *ptr; - int err = 0, strlen, reduce = 0; - - d = d_find_alias(&pi->vfs_inode); - if (!d) { - printk("%s: no alias, list_empty: %d.\n", __func__, list_empty(&pi->vfs_inode.i_dentry)); - return -ENOENT; - } - - spin_lock(¤t->fs->lock); - path.mnt = mntget(current->fs->root.mnt); - spin_unlock(¤t->fs->lock); - - path.dentry = d; - - if (!IS_ROOT(d) && d_unhashed(d)) - reduce = 1; - - ptr = d_path(&path, data, len); - if (IS_ERR(ptr)) { - err = PTR_ERR(ptr); - goto out; - } - - if (reduce && len >= UNHASHED_OBSCURE_STRING_SIZE) { - char *end = data + len - UNHASHED_OBSCURE_STRING_SIZE; - *end = '\0'; - } - - strlen = len - (ptr - (char *)data); - memmove(data, ptr, strlen); - ptr = data; - - err = strlen; - - dprintk("%s: dname: '%s', len: %u, maxlen: %u, name: '%s', strlen: %d.\n", - __func__, d->d_name.name, d->d_name.len, len, ptr, strlen); - -out: - dput(d); - mntput(path.mnt); - - return err; -} - -int pohmelfs_path_length(struct pohmelfs_inode *pi) -{ - struct dentry *d, *root, *first; - int len; - unsigned seq; - - first = d_find_alias(&pi->vfs_inode); - if (!first) { - dprintk("%s: ino: %llu, mode: %o.\n", __func__, pi->ino, pi->vfs_inode.i_mode); - return -ENOENT; - } - - spin_lock(¤t->fs->lock); - root = dget(current->fs->root.dentry); - spin_unlock(¤t->fs->lock); - -rename_retry: - len = 1; /* Root slash */ - d = first; - seq = read_seqbegin(&rename_lock); - rcu_read_lock(); - - if (!IS_ROOT(d) && d_unhashed(d)) - len += UNHASHED_OBSCURE_STRING_SIZE; /* Obscure " (deleted)" string */ - - while (d && d != root && !IS_ROOT(d)) { - len += d->d_name.len + 1; /* Plus slash */ - d = d->d_parent; - } - rcu_read_unlock(); - if (read_seqretry(&rename_lock, seq)) - goto rename_retry; - - dput(root); - dput(first); - - return len + 1; /* Including zero-byte */ -} diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c deleted file mode 100644 index 06c1a7451b1b..000000000000 --- a/drivers/staging/pohmelfs/trans.c +++ /dev/null @@ -1,706 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "netfs.h" - -static struct kmem_cache *netfs_trans_dst; -static mempool_t *netfs_trans_dst_pool; - -static void netfs_trans_init_static(struct netfs_trans *t, int num, int size) -{ - t->page_num = num; - t->total_size = size; - atomic_set(&t->refcnt, 1); - - spin_lock_init(&t->dst_lock); - INIT_LIST_HEAD(&t->dst_list); -} - -static int netfs_trans_send_pages(struct netfs_trans *t, struct netfs_state *st) -{ - int err = 0; - unsigned int i, attached_pages = t->attached_pages, ci; - struct msghdr msg; - struct page **pages = (t->eng) ? t->eng->pages : t->pages; - struct page *p; - unsigned int size; - - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_WAITALL | MSG_MORE; - - ci = 0; - for (i = 0; i < t->page_num; ++i) { - struct page *page = pages[ci]; - struct netfs_cmd cmd; - struct iovec io; - - p = t->pages[i]; - - if (!p) - continue; - - size = page_private(p); - - io.iov_base = &cmd; - io.iov_len = sizeof(struct netfs_cmd); - - cmd.cmd = NETFS_WRITE_PAGE; - cmd.ext = 0; - cmd.id = 0; - cmd.size = size; - cmd.start = p->index; - cmd.start <<= PAGE_CACHE_SHIFT; - cmd.csize = 0; - cmd.cpad = 0; - cmd.iv = pohmelfs_gen_iv(t); - - netfs_convert_cmd(&cmd); - - msg.msg_iov = &io; - msg.msg_iovlen = 1; - msg.msg_flags = MSG_WAITALL | MSG_MORE; - - err = kernel_sendmsg(st->socket, &msg, (struct kvec *)msg.msg_iov, 1, sizeof(struct netfs_cmd)); - if (err <= 0) { - printk("%s: %d/%d failed to send transaction header: t: %p, gen: %u, err: %d.\n", - __func__, i, t->page_num, t, t->gen, err); - if (err == 0) - err = -ECONNRESET; - goto err_out; - } - - msg.msg_flags = MSG_WAITALL | (attached_pages == 1 ? 0 : - MSG_MORE); - - err = kernel_sendpage(st->socket, page, 0, size, msg.msg_flags); - if (err <= 0) { - printk("%s: %d/%d failed to send transaction page: t: %p, gen: %u, size: %u, err: %d.\n", - __func__, i, t->page_num, t, t->gen, size, err); - if (err == 0) - err = -ECONNRESET; - goto err_out; - } - - dprintk("%s: %d/%d sent t: %p, gen: %u, page: %p/%p, size: %u.\n", - __func__, i, t->page_num, t, t->gen, page, p, size); - - err = 0; - attached_pages--; - if (!attached_pages) - break; - ci++; - - continue; - -err_out: - printk("%s: t: %p, gen: %u, err: %d.\n", __func__, t, t->gen, err); - netfs_state_exit(st); - break; - } - - return err; -} - -int netfs_trans_send(struct netfs_trans *t, struct netfs_state *st) -{ - int err; - struct msghdr msg; - - BUG_ON(!t->iovec.iov_len); - BUG_ON(t->iovec.iov_len > 1024*1024*1024); - - netfs_state_lock_send(st); - if (!st->socket) { - err = netfs_state_init(st); - if (err) - goto err_out_unlock_return; - } - - msg.msg_iov = &t->iovec; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_WAITALL; - - if (t->attached_pages) - msg.msg_flags |= MSG_MORE; - - err = kernel_sendmsg(st->socket, &msg, (struct kvec *)msg.msg_iov, 1, t->iovec.iov_len); - if (err <= 0) { - printk("%s: failed to send contig transaction: t: %p, gen: %u, size: %zu, err: %d.\n", - __func__, t, t->gen, t->iovec.iov_len, err); - if (err == 0) - err = -ECONNRESET; - goto err_out_unlock_return; - } - - dprintk("%s: sent %s transaction: t: %p, gen: %u, size: %zu, page_num: %u.\n", - __func__, (t->page_num) ? "partial" : "full", - t, t->gen, t->iovec.iov_len, t->page_num); - - err = 0; - if (t->attached_pages) - err = netfs_trans_send_pages(t, st); - -err_out_unlock_return: - - if (st->need_reset) - netfs_state_exit(st); - - netfs_state_unlock_send(st); - - dprintk("%s: t: %p, gen: %u, err: %d.\n", - __func__, t, t->gen, err); - - t->result = err; - return err; -} - -static inline int netfs_trans_cmp(unsigned int gen, unsigned int new) -{ - if (gen < new) - return 1; - if (gen > new) - return -1; - return 0; -} - -struct netfs_trans_dst *netfs_trans_search(struct netfs_state *st, unsigned int gen) -{ - struct rb_root *root = &st->trans_root; - struct rb_node *n = root->rb_node; - struct netfs_trans_dst *tmp, *ret = NULL; - struct netfs_trans *t; - int cmp; - - while (n) { - tmp = rb_entry(n, struct netfs_trans_dst, state_entry); - t = tmp->trans; - - cmp = netfs_trans_cmp(t->gen, gen); - if (cmp < 0) - n = n->rb_left; - else if (cmp > 0) - n = n->rb_right; - else { - ret = tmp; - break; - } - } - - return ret; -} - -static int netfs_trans_insert(struct netfs_trans_dst *ndst, struct netfs_state *st) -{ - struct rb_root *root = &st->trans_root; - struct rb_node **n = &root->rb_node, *parent = NULL; - struct netfs_trans_dst *ret = NULL, *tmp; - struct netfs_trans *t = NULL, *new = ndst->trans; - int cmp; - - while (*n) { - parent = *n; - - tmp = rb_entry(parent, struct netfs_trans_dst, state_entry); - t = tmp->trans; - - cmp = netfs_trans_cmp(t->gen, new->gen); - if (cmp < 0) - n = &parent->rb_left; - else if (cmp > 0) - n = &parent->rb_right; - else { - ret = tmp; - break; - } - } - - if (ret) { - printk("%s: exist: old: gen: %u, flags: %x, send_time: %lu, " - "new: gen: %u, flags: %x, send_time: %lu.\n", - __func__, t->gen, t->flags, ret->send_time, - new->gen, new->flags, ndst->send_time); - return -EEXIST; - } - - rb_link_node(&ndst->state_entry, parent, n); - rb_insert_color(&ndst->state_entry, root); - ndst->send_time = jiffies; - - return 0; -} - -int netfs_trans_remove_nolock(struct netfs_trans_dst *dst, struct netfs_state *st) -{ - if (dst && dst->state_entry.rb_parent_color) { - rb_erase(&dst->state_entry, &st->trans_root); - dst->state_entry.rb_parent_color = 0; - return 1; - } - return 0; -} - -static int netfs_trans_remove_state(struct netfs_trans_dst *dst) -{ - int ret; - struct netfs_state *st = dst->state; - - mutex_lock(&st->trans_lock); - ret = netfs_trans_remove_nolock(dst, st); - mutex_unlock(&st->trans_lock); - - return ret; -} - -/* - * Create new destination for given transaction associated with given network state. - * Transaction's reference counter is bumped and will be dropped when either - * reply is received or when async timeout detection task will fail resending - * and drop transaction. - */ -static int netfs_trans_push_dst(struct netfs_trans *t, struct netfs_state *st) -{ - struct netfs_trans_dst *dst; - int err; - - dst = mempool_alloc(netfs_trans_dst_pool, GFP_KERNEL); - if (!dst) - return -ENOMEM; - - dst->retries = 0; - dst->send_time = 0; - dst->state = st; - dst->trans = t; - netfs_trans_get(t); - - mutex_lock(&st->trans_lock); - err = netfs_trans_insert(dst, st); - mutex_unlock(&st->trans_lock); - - if (err) - goto err_out_free; - - spin_lock(&t->dst_lock); - list_add_tail(&dst->trans_entry, &t->dst_list); - spin_unlock(&t->dst_lock); - - return 0; - -err_out_free: - t->result = err; - netfs_trans_put(t); - mempool_free(dst, netfs_trans_dst_pool); - return err; -} - -static void netfs_trans_free_dst(struct netfs_trans_dst *dst) -{ - netfs_trans_put(dst->trans); - mempool_free(dst, netfs_trans_dst_pool); -} - -static void netfs_trans_remove_dst(struct netfs_trans_dst *dst) -{ - if (netfs_trans_remove_state(dst)) - netfs_trans_free_dst(dst); -} - -/* - * Drop destination transaction entry when we know it. - */ -void netfs_trans_drop_dst(struct netfs_trans_dst *dst) -{ - struct netfs_trans *t = dst->trans; - - spin_lock(&t->dst_lock); - list_del_init(&dst->trans_entry); - spin_unlock(&t->dst_lock); - - netfs_trans_remove_dst(dst); -} - -/* - * Drop destination transaction entry when we know it and when we - * already removed dst from state tree. - */ -void netfs_trans_drop_dst_nostate(struct netfs_trans_dst *dst) -{ - struct netfs_trans *t = dst->trans; - - spin_lock(&t->dst_lock); - list_del_init(&dst->trans_entry); - spin_unlock(&t->dst_lock); - - netfs_trans_free_dst(dst); -} - -/* - * This drops destination transaction entry from appropriate network state - * tree and drops related reference counter. It is possible that transaction - * will be freed here if its reference counter hits zero. - * Destination transaction entry will be freed. - */ -void netfs_trans_drop_trans(struct netfs_trans *t, struct netfs_state *st) -{ - struct netfs_trans_dst *dst, *tmp, *ret = NULL; - - spin_lock(&t->dst_lock); - list_for_each_entry_safe(dst, tmp, &t->dst_list, trans_entry) { - if (dst->state == st) { - ret = dst; - list_del(&dst->trans_entry); - break; - } - } - spin_unlock(&t->dst_lock); - - if (ret) - netfs_trans_remove_dst(ret); -} - -/* - * This drops destination transaction entry from appropriate network state - * tree and drops related reference counter. It is possible that transaction - * will be freed here if its reference counter hits zero. - * Destination transaction entry will be freed. - */ -void netfs_trans_drop_last(struct netfs_trans *t, struct netfs_state *st) -{ - struct netfs_trans_dst *dst, *tmp, *ret; - - spin_lock(&t->dst_lock); - ret = list_entry(t->dst_list.prev, struct netfs_trans_dst, trans_entry); - if (ret->state != st) { - ret = NULL; - list_for_each_entry_safe(dst, tmp, &t->dst_list, trans_entry) { - if (dst->state == st) { - ret = dst; - list_del_init(&dst->trans_entry); - break; - } - } - } else { - list_del(&ret->trans_entry); - } - spin_unlock(&t->dst_lock); - - if (ret) - netfs_trans_remove_dst(ret); -} - -static int netfs_trans_push(struct netfs_trans *t, struct netfs_state *st) -{ - int err; - - err = netfs_trans_push_dst(t, st); - if (err) - return err; - - err = netfs_trans_send(t, st); - if (err) - goto err_out_free; - - if (t->flags & NETFS_TRANS_SINGLE_DST) - pohmelfs_switch_active(st->psb); - - return 0; - -err_out_free: - t->result = err; - netfs_trans_drop_last(t, st); - - return err; -} - -int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb) -{ - struct pohmelfs_config *c; - int err = -ENODEV; - struct netfs_state *st; -#if 0 - dprintk("%s: t: %p, gen: %u, size: %u, page_num: %u, active: %p.\n", - __func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state); -#endif - mutex_lock(&psb->state_lock); - list_for_each_entry(c, &psb->state_list, config_entry) { - st = &c->state; - - if (t->flags & NETFS_TRANS_SINGLE_DST) { - if (!(st->ctl.perm & POHMELFS_IO_PERM_READ)) - continue; - } else { - if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE)) - continue; - } - - if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio) && - (t->flags & NETFS_TRANS_SINGLE_DST)) - st = &psb->active_state->state; - - err = netfs_trans_push(t, st); - if (!err && (t->flags & NETFS_TRANS_SINGLE_DST)) - break; - } - - mutex_unlock(&psb->state_lock); -#if 0 - dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n", - __func__, t, t->gen, t->iovec.iov_len, t->page_num, err); -#endif - if (err) - t->result = err; - return err; -} - -int netfs_trans_finish(struct netfs_trans *t, struct pohmelfs_sb *psb) -{ - int err; - struct netfs_cmd *cmd = t->iovec.iov_base; - - t->gen = atomic_inc_return(&psb->trans_gen); - - cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) + - t->attached_size + t->attached_pages * sizeof(struct netfs_cmd); - cmd->cmd = NETFS_TRANS; - cmd->start = t->gen; - cmd->id = 0; - - if (psb->perform_crypto) { - cmd->ext = psb->crypto_attached_size; - cmd->csize = psb->crypto_attached_size; - } - - dprintk("%s: t: %u, size: %u, iov_len: %zu, attached_size: %u, attached_pages: %u.\n", - __func__, t->gen, cmd->size, t->iovec.iov_len, t->attached_size, t->attached_pages); - err = pohmelfs_trans_crypt(t, psb); - if (err) { - t->result = err; - netfs_convert_cmd(cmd); - dprintk("%s: trans: %llu, crypto_attached_size: %u, attached_size: %u, attached_pages: %d, trans_size: %u, err: %d.\n", - __func__, cmd->start, psb->crypto_attached_size, t->attached_size, t->attached_pages, cmd->size, err); - } - netfs_trans_put(t); - return err; -} - -/* - * Resend transaction to remote server(s). - * If new servers were added into superblock, we can try to send data - * to them too. - * - * It is called under superblock's state_lock, so we can safely - * dereference psb->state_list. Also, transaction's reference counter is - * bumped, so it can not go away under us, thus we can safely access all - * its members. State is locked. - * - * This function returns 0 if transaction was successfully sent to at - * least one destination target. - */ -int netfs_trans_resend(struct netfs_trans *t, struct pohmelfs_sb *psb) -{ - struct netfs_trans_dst *dst; - struct netfs_state *st; - struct pohmelfs_config *c; - int err, exist, error = -ENODEV; - - list_for_each_entry(c, &psb->state_list, config_entry) { - st = &c->state; - - exist = 0; - spin_lock(&t->dst_lock); - list_for_each_entry(dst, &t->dst_list, trans_entry) { - if (st == dst->state) { - exist = 1; - break; - } - } - spin_unlock(&t->dst_lock); - - if (exist) { - if (!(t->flags & NETFS_TRANS_SINGLE_DST) || - (c->config_entry.next == &psb->state_list)) { - dprintk("%s: resending st: %p, t: %p, gen: %u.\n", - __func__, st, t, t->gen); - err = netfs_trans_send(t, st); - if (!err) - error = 0; - } - continue; - } - - dprintk("%s: pushing/resending st: %p, t: %p, gen: %u.\n", - __func__, st, t, t->gen); - err = netfs_trans_push(t, st); - if (err) - continue; - error = 0; - if (t->flags & NETFS_TRANS_SINGLE_DST) - break; - } - - t->result = error; - return error; -} - -void *netfs_trans_add(struct netfs_trans *t, unsigned int size) -{ - struct iovec *io = &t->iovec; - void *ptr; - - if (size > t->total_size) { - ptr = ERR_PTR(-EINVAL); - goto out; - } - - if (io->iov_len + size > t->total_size) { - dprintk("%s: too big size t: %p, gen: %u, iov_len: %zu, size: %u, total: %u.\n", - __func__, t, t->gen, io->iov_len, size, t->total_size); - ptr = ERR_PTR(-E2BIG); - goto out; - } - - ptr = io->iov_base + io->iov_len; - io->iov_len += size; - -out: - dprintk("%s: t: %p, gen: %u, size: %u, total: %zu.\n", - __func__, t, t->gen, size, io->iov_len); - return ptr; -} - -void netfs_trans_free(struct netfs_trans *t) -{ - if (t->eng) - pohmelfs_crypto_thread_make_ready(t->eng->thread); - kfree(t); -} - -struct netfs_trans *netfs_trans_alloc(struct pohmelfs_sb *psb, unsigned int size, - unsigned int flags, unsigned int nr) -{ - struct netfs_trans *t; - unsigned int num, cont, pad, size_no_trans; - unsigned int crypto_added = 0; - struct netfs_cmd *cmd; - - if (psb->perform_crypto) - crypto_added = psb->crypto_attached_size; - - /* - * |sizeof(struct netfs_trans)| - * |sizeof(struct netfs_cmd)| - transaction header - * |size| - buffer with requested size - * |padding| - crypto padding, zero bytes - * |nr * sizeof(struct page *)| - array of page pointers - * - * Overall size should be less than PAGE_SIZE for guaranteed allocation. - */ - - cont = size; - size = ALIGN(size, psb->crypto_align_size); - pad = size - cont; - - size_no_trans = size + sizeof(struct netfs_cmd) * 2 + crypto_added; - - cont = sizeof(struct netfs_trans) + size_no_trans; - - num = (PAGE_SIZE - cont)/sizeof(struct page *); - - if (nr > num) - nr = num; - - t = kzalloc(cont + nr*sizeof(struct page *), GFP_NOIO); - if (!t) - goto err_out_exit; - - t->iovec.iov_base = (void *)(t + 1); - t->pages = (struct page **)(t->iovec.iov_base + size_no_trans); - - /* - * Reserving space for transaction header. - */ - t->iovec.iov_len = sizeof(struct netfs_cmd) + crypto_added; - - netfs_trans_init_static(t, nr, size_no_trans); - - t->flags = flags; - t->psb = psb; - - cmd = (struct netfs_cmd *)t->iovec.iov_base; - - cmd->size = size; - cmd->cpad = pad; - cmd->csize = crypto_added; - - dprintk("%s: t: %p, gen: %u, size: %u, padding: %u, align_size: %u, flags: %x, " - "page_num: %u, base: %p, pages: %p.\n", - __func__, t, t->gen, size, pad, psb->crypto_align_size, flags, nr, - t->iovec.iov_base, t->pages); - - return t; - -err_out_exit: - return NULL; -} - -int netfs_trans_init(void) -{ - int err = -ENOMEM; - - netfs_trans_dst = kmem_cache_create("netfs_trans_dst", sizeof(struct netfs_trans_dst), - 0, 0, NULL); - if (!netfs_trans_dst) - goto err_out_exit; - - netfs_trans_dst_pool = mempool_create_slab_pool(256, netfs_trans_dst); - if (!netfs_trans_dst_pool) - goto err_out_free; - - return 0; - -err_out_free: - kmem_cache_destroy(netfs_trans_dst); -err_out_exit: - return err; -} - -void netfs_trans_exit(void) -{ - mempool_destroy(netfs_trans_dst_pool); - kmem_cache_destroy(netfs_trans_dst); -} -- cgit v1.2.3-55-g7522 From ec44fd429879f7d4f28021f1a7f9fb0b5f831aab Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 8 Feb 2012 17:13:39 -0800 Subject: drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and pltfm->als_vmax is 0. This does not make sense. I think what we want here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV. Both als_vmin and als_vmax local variables will be set to pltfm->als_vmin and pltfm->als_vmax by a few lines latter. Thus also remove a redundant assignment for als_vmin and als_vmax in this patch. Signed-off-by: Axel Lin Cc: Shreshtha Kumar Sahu Acked-by: Milo(Woogyom) Kim Tested-by: Milo(Woogyom) Kim Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-lm3530.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c index 45e6878d7374..e59c166a0ce2 100644 --- a/drivers/leds/leds-lm3530.c +++ b/drivers/leds/leds-lm3530.c @@ -164,8 +164,8 @@ static int lm3530_init_registers(struct lm3530_data *drvdata) if (drvdata->mode == LM3530_BL_MODE_ALS) { if (pltfm->als_vmax == 0) { - pltfm->als_vmin = als_vmin = 0; - pltfm->als_vmin = als_vmax = LM3530_ALS_WINDOW_mV; + pltfm->als_vmin = 0; + pltfm->als_vmax = LM3530_ALS_WINDOW_mV; } als_vmin = pltfm->als_vmin; -- cgit v1.2.3-55-g7522 From 025e4ab3db07fcbf62c01e4f30d1012234beb980 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 8 Feb 2012 17:13:41 -0800 Subject: pcmcia: fix socket refcount decrementing on each resume This fixes a memory-corrupting bug: not only does it cause the warning, but as a result of dropping the refcount to zero, it causes the pcmcia_socket0 device structure to be freed while it still has references, causing slab caches corruption. A fatal oops quickly follows this warning - often even just a 'dmesg' following the warning causes the kernel to oops. While testing suspend/resume on an ARM device with PCMCIA support, and a CF card inserted, I found that after five suspend and resumes, the kernel would complain, and shortly die after with slab corruption. WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() As the message doesn't give a clue about which kobject, and the built-in debugging in drivers/base/power/main.c happens too late, this was added right before each get_device(): printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount)); and on the 3rd s2ram cycle, the following behaviour observed: On the 3rd suspend/resume cycle: dpm_prepare: c1a0d998 [pcmcia_socket0] 3 dpm_suspend: c1a0d998 [pcmcia_socket0] 3 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume: c1a0d998 [pcmcia_socket0] 3 dpm_complete: c1a0d998 [pcmcia_socket0] 2 4th: dpm_prepare: c1a0d998 [pcmcia_socket0] 2 dpm_suspend: c1a0d998 [pcmcia_socket0] 2 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume: c1a0d998 [pcmcia_socket0] 2 dpm_complete: c1a0d998 [pcmcia_socket0] 1 5th: dpm_prepare: c1a0d998 [pcmcia_socket0] 1 dpm_suspend: c1a0d998 [pcmcia_socket0] 1 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume: c1a0d998 [pcmcia_socket0] 1 dpm_complete: c1a0d998 [pcmcia_socket0] 0 ------------[ cut here ]------------ WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() Modules linked in: ucb1x00_core Backtrace: [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x50/0x68) [] (warn_slowpath_common+0x0/0x68) from [] (warn_slowpath_null+0x24/0x28) [] (warn_slowpath_null+0x0/0x28) from [] (kobject_get+0x28/0x50) [] (kobject_get+0x0/0x50) from [] (get_device+0x1c/0x24) [] (dpm_complete+0x0/0x1a0) from [] (dpm_resume_end+0x1c/0x20) ... Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"), the following change was made to cs.c: return 0; } #endif - - send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); + if (!(skt->state & SOCKET_CARDBUS) && (skt->callback)) + skt->callback->early_resume(skt); return 0; } And the corresponding change in ds.c is from: -static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) -{ - struct pcmcia_socket *s = pcmcia_get_socket(skt); ... - switch (event) { ... - case CS_EVENT_PM_RESUME: - if (verify_cis_cache(skt) != 0) { - dev_dbg(&skt->dev, "cis mismatch - different card\n"); - /* first, remove the card */ - ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); - mutex_lock(&s->ops_mutex); - destroy_cis_cache(skt); - kfree(skt->fake_cis); - skt->fake_cis = NULL; - s->functions = 0; - mutex_unlock(&s->ops_mutex); - /* now, add the new card */ - ds_event(skt, CS_EVENT_CARD_INSERTION, - CS_EVENT_PRI_LOW); - } - break; ... - } - pcmcia_put_socket(s); - return 0; -} /* ds_event */ to: +static int pcmcia_bus_early_resume(struct pcmcia_socket *skt) +{ + if (!verify_cis_cache(skt)) { + pcmcia_put_socket(skt); + return 0; + } + dev_dbg(&skt->dev, "cis mismatch - different card\n"); + /* first, remove the card */ + pcmcia_bus_remove(skt); + mutex_lock(&skt->ops_mutex); + destroy_cis_cache(skt); + kfree(skt->fake_cis); + skt->fake_cis = NULL; + skt->functions = 0; + mutex_unlock(&skt->ops_mutex); + /* now, add the new card */ + pcmcia_bus_add(skt); + return 0; +} As can be seen, the original function called pcmcia_get_socket() and pcmcia_put_socket() around the guts, whereas the replacement code calls pcmcia_put_socket() only in one path. This creates an imbalance in the refcounting. Testing with pcmcia_put_socket() put removed shows that the bug is gone: dpm_suspend: c1a10998 [pcmcia_socket0] 5 dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume: c1a10998 [pcmcia_socket0] 5 dpm_complete: c1a10998 [pcmcia_socket0] 5 Tested-by: Russell King Signed-off-by: Russell King Cc: Dominik Brodowski Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pcmcia/ds.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 749c2a16012c..1932029de48d 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -1269,10 +1269,8 @@ static int pcmcia_bus_add(struct pcmcia_socket *skt) static int pcmcia_bus_early_resume(struct pcmcia_socket *skt) { - if (!verify_cis_cache(skt)) { - pcmcia_put_socket(skt); + if (!verify_cis_cache(skt)) return 0; - } dev_dbg(&skt->dev, "cis mismatch - different card\n"); -- cgit v1.2.3-55-g7522 From eb564e1dbc3685c08a52a0eea3821815fac50511 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 7 Feb 2012 01:46:42 -0800 Subject: hwmon: (w83627ehf) Remove duplicate code Commit ec3e5a16446fef1891611fe3bdfa5954d1ddf5e4 slipped in some duplicate code. Remove it. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- drivers/hwmon/w83627ehf.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 4d383e7e051d..5276d1933dbc 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -2349,11 +2349,6 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) /* Read fan clock dividers immediately */ w83627ehf_update_fan_div_common(dev, data); - /* Read pwm data to save original values */ - w83627ehf_update_pwm_common(dev, data); - for (i = 0; i < data->pwm_num; i++) - data->pwm_enable_orig[i] = data->pwm_enable[i]; - /* Read pwm data to save original values */ w83627ehf_update_pwm_common(dev, data); for (i = 0; i < data->pwm_num; i++) -- cgit v1.2.3-55-g7522 From 09e87e5c4f9af656af2a8a3afc03487c5d9287c3 Mon Sep 17 00:00:00 2001 From: Nikolaus Schulz Date: Wed, 8 Feb 2012 18:56:08 +0100 Subject: hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375 In order to enable temperature mode aka automatic mode for the F75373 and F75375 chips, the two FANx_MODE bits in the fan configuration register need be set to 01, not 10. Signed-off-by: Nikolaus Schulz Cc: stable@kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck --- drivers/hwmon/f75375s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index eedf574ab539..c81ad45d9fa9 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -369,7 +369,7 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) fanmode |= (3 << FAN_CTRL_MODE(nr)); break; case 2: /* AUTOMATIC*/ - fanmode |= (2 << FAN_CTRL_MODE(nr)); + fanmode |= (1 << FAN_CTRL_MODE(nr)); break; case 3: /* fan speed */ break; -- cgit v1.2.3-55-g7522 From a367a1e08b21e995c7112ff32b5efc97d104d405 Mon Sep 17 00:00:00 2001 From: Nikolaus Schulz Date: Wed, 8 Feb 2012 18:56:09 +0100 Subject: hwmon: (f75375s) Fix reading of wrong register when initializing the F75387 Unlike the other chips supported by this driver, the F75387 stores the pwm_mode in register F75375_REG_FAN_TIMER, not F75375_REG_CONFIG1. Signed-off-by: Nikolaus Schulz Signed-off-by: Guenter Roeck --- drivers/hwmon/f75375s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index c81ad45d9fa9..b3eef4474a98 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -723,7 +723,7 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data, if (data->kind == f75387) { bool manu, duty; - if (!(conf & (1 << F75387_FAN_CTRL_LINEAR(nr)))) + if (!(mode & (1 << F75387_FAN_CTRL_LINEAR(nr)))) data->pwm_mode[nr] = 1; manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1); -- cgit v1.2.3-55-g7522 From eb2f255b2d360df3f500042a2258dcf2fcbe89a2 Mon Sep 17 00:00:00 2001 From: Nikolaus Schulz Date: Wed, 8 Feb 2012 18:56:10 +0100 Subject: hwmon: (f75375s) Fix bit shifting in f75375_write16 In order to extract the high byte of the 16-bit word, shift the word to the right, not to the left. Signed-off-by: Nikolaus Schulz Cc: stable@kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck --- drivers/hwmon/f75375s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index b3eef4474a98..0aabaaf359ac 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -172,7 +172,7 @@ static inline void f75375_write8(struct i2c_client *client, u8 reg, static inline void f75375_write16(struct i2c_client *client, u8 reg, u16 value) { - int err = i2c_smbus_write_byte_data(client, reg, (value << 8)); + int err = i2c_smbus_write_byte_data(client, reg, (value >> 8)); if (err) return; i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF)); -- cgit v1.2.3-55-g7522 From b868179c47e9e8eadcd04c1f3105998e528988a3 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Thu, 19 Jan 2012 17:47:24 +0000 Subject: e1000: add dropped DMA receive enable back in for WoL Commit d5bc77a223b0e9b9dfb002048d2b34a79e7d0b48 broke Wake-on-LAN by inadvertently dropping the enabling of DMA receives. Restore the enabling of DMA receives for WoL. This is applicable to 3.1+ stable trees. CC: stable@vger.stable.org Reported-by: Tobias Klausmann Signed-off-by: Dean Nelson Tested-by: Tobias Klausmann Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_main.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 669ca3800c01..d94d64b5d695 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -4740,12 +4740,14 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) e1000_setup_rctl(adapter); e1000_set_rx_mode(netdev); + rctl = er32(RCTL); + /* turn on all-multi mode if wake on multicast is enabled */ - if (wufc & E1000_WUFC_MC) { - rctl = er32(RCTL); + if (wufc & E1000_WUFC_MC) rctl |= E1000_RCTL_MPE; - ew32(RCTL, rctl); - } + + /* enable receives in the hardware */ + ew32(RCTL, rctl | E1000_RCTL_EN); if (hw->mac_type >= e1000_82540) { ctrl = er32(CTRL); -- cgit v1.2.3-55-g7522 From 0629292117572a60465f38cdedde2f8164c3df0b Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Thu, 2 Feb 2012 23:51:43 +0000 Subject: igb: fix vf lookup Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This is applicable to 3.2+ kernels. CC: stable@vger.kernel.org Reported-by: David Ahern Signed-off-by: Greg Rose Tested-by: Robert E Garrett Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index e91d73c8aa4e..94be6c32fa7d 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -5012,7 +5012,8 @@ static int igb_find_enabled_vfs(struct igb_adapter *adapter) vf_devfn = pdev->devfn + 0x80; pvfdev = pci_get_device(hw->vendor_id, device_id, NULL); while (pvfdev) { - if (pvfdev->devfn == vf_devfn) + if (pvfdev->devfn == vf_devfn && + (pvfdev->bus->number >= pdev->bus->number)) vfs_found++; vf_devfn += vf_stride; pvfdev = pci_get_device(hw->vendor_id, -- cgit v1.2.3-55-g7522 From a4b08329c74985e5cc3a44b6d2b2c59444ed8079 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Fri, 3 Feb 2012 00:54:13 +0000 Subject: ixgbe: fix vf lookup Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This bug exists in 3.2 stable as well as 3.3 release candidates. CC: stable@vger.kernel.org Reported-by: David Ahern Signed-off-by: Greg Rose Tested-by: Robert E Garrett Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 8d8cdbc22df0..b01ecb4d2bb1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -67,7 +67,8 @@ static int ixgbe_find_enabled_vfs(struct ixgbe_adapter *adapter) vf_devfn = pdev->devfn + 0x80; pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL); while (pvfdev) { - if (pvfdev->devfn == vf_devfn) + if (pvfdev->devfn == vf_devfn && + (pvfdev->bus->number >= pdev->bus->number)) vfs_found++; vf_devfn += 2; pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, -- cgit v1.2.3-55-g7522 From 4cd6923d3481773f3fbcae5ca940c8823aa33475 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Wed, 25 Jan 2012 07:59:37 +0000 Subject: ixgbe: Fix case of Tx Hang in PF with 32 VFs A check for the number of VFs allocated should have used a greater than equal operator instead of just greater than. This caused allocation of exactly 32 VFs to not enable the PF transmit and receive enables. Signed-off-by: Greg Rose Tested-by: Robert E Garrett Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 92192c6c4f50..819b5c0def51 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2830,7 +2830,7 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits); vf_shift = adapter->num_vfs % 32; - reg_offset = (adapter->num_vfs > 32) ? 1 : 0; + reg_offset = (adapter->num_vfs >= 32) ? 1 : 0; /* Enable only the PF's pool for Tx/Rx */ IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift)); -- cgit v1.2.3-55-g7522 From 642c680e9314fc102bc1f096f48ae3974931ef42 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 10 Nov 2011 09:09:17 +0000 Subject: ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size This patch fixes an issue in which RSC will generate corrupted frames when PAGE_SIZE is larger than 8K. Specifically it looks like that in 2.6.39 a change was made so that GRO would always have at least 16 frags available for coalescing, but the ixgbe RSC logic was not updated. As such the RSC feature would generate a frame larger than 64K and then overflow the value in the IP length field. To correct that I am now basing things on the PAGE_SIZE. Signed-off-by: Alexander Duyck Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 819b5c0def51..068870483f8d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2633,22 +2633,22 @@ static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, /* * we must limit the number of descriptors so that the * total size of max desc * buf_len is not greater - * than 65535 + * than 65536 */ if (ring_is_ps_enabled(ring)) { -#if (MAX_SKB_FRAGS > 16) +#if (PAGE_SIZE < 8192) rscctrl |= IXGBE_RSCCTL_MAXDESC_16; -#elif (MAX_SKB_FRAGS > 8) +#elif (PAGE_SIZE < 16384) rscctrl |= IXGBE_RSCCTL_MAXDESC_8; -#elif (MAX_SKB_FRAGS > 4) +#elif (PAGE_SIZE < 32768) rscctrl |= IXGBE_RSCCTL_MAXDESC_4; #else rscctrl |= IXGBE_RSCCTL_MAXDESC_1; #endif } else { - if (rx_buf_len < IXGBE_RXBUFFER_4K) + if (rx_buf_len <= IXGBE_RXBUFFER_4K) rscctrl |= IXGBE_RSCCTL_MAXDESC_16; - else if (rx_buf_len < IXGBE_RXBUFFER_8K) + else if (rx_buf_len <= IXGBE_RXBUFFER_8K) rscctrl |= IXGBE_RSCCTL_MAXDESC_8; else rscctrl |= IXGBE_RSCCTL_MAXDESC_4; -- cgit v1.2.3-55-g7522 From 9d837ea2b72321ffbdaf83c980923d23ae898baa Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Sat, 7 Jan 2012 08:39:50 +0000 Subject: ixgbe: do not update real num queues when netdev is going away If the netdev is already in NETREG_UNREGISTERING/_UNREGISTERED state, do not update the real num tx queues. netdev_queue_update_kobjects() is already called via remove_queue_kobjects() at NETREG_UNREGISTERING time. So, when upper layer driver, e.g., FCoE protocol stack is monitoring the netdev event of NETDEV_UNREGISTER and calls back to LLD ndo_fcoe_disable() to remove extra queues allocated for FCoE, the associated txq sysfs kobjects are already removed, and trying to update the real num queues would cause something like below: ... PID: 25138 TASK: ffff88021e64c440 CPU: 3 COMMAND: "kworker/3:3" #0 [ffff88021f007760] machine_kexec at ffffffff810226d9 #1 [ffff88021f0077d0] crash_kexec at ffffffff81089d2d #2 [ffff88021f0078a0] oops_end at ffffffff813bca78 #3 [ffff88021f0078d0] no_context at ffffffff81029e72 #4 [ffff88021f007920] __bad_area_nosemaphore at ffffffff8102a155 #5 [ffff88021f0079f0] bad_area_nosemaphore at ffffffff8102a23e #6 [ffff88021f007a00] do_page_fault at ffffffff813bf32e #7 [ffff88021f007b10] page_fault at ffffffff813bc045 [exception RIP: sysfs_find_dirent+17] RIP: ffffffff81178611 RSP: ffff88021f007bc0 RFLAGS: 00010246 RAX: ffff88021e64c440 RBX: ffffffff8156cc63 RCX: 0000000000000004 RDX: ffffffff8156cc63 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88021f007be0 R8: 0000000000000004 R9: 0000000000000008 R10: ffffffff816fed00 R11: 0000000000000004 R12: 0000000000000000 R13: ffffffff8156cc63 R14: 0000000000000000 R15: ffff8802222a0000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff88021f007be8] sysfs_get_dirent at ffffffff81178c07 #9 [ffff88021f007c18] sysfs_remove_group at ffffffff8117ac27 #10 [ffff88021f007c48] netdev_queue_update_kobjects at ffffffff813178f9 #11 [ffff88021f007c88] netif_set_real_num_tx_queues at ffffffff81303e38 #12 [ffff88021f007cc8] ixgbe_set_num_queues at ffffffffa0249763 [ixgbe] #13 [ffff88021f007cf8] ixgbe_init_interrupt_scheme at ffffffffa024ea89 [ixgbe] #14 [ffff88021f007d48] ixgbe_fcoe_disable at ffffffffa0267113 [ixgbe] #15 [ffff88021f007d68] vlan_dev_fcoe_disable at ffffffffa014fef5 [8021q] #16 [ffff88021f007d78] fcoe_interface_cleanup at ffffffffa02b7dfd [fcoe] #17 [ffff88021f007df8] fcoe_destroy_work at ffffffffa02b7f08 [fcoe] #18 [ffff88021f007e18] process_one_work at ffffffff8105d7ca #19 [ffff88021f007e68] worker_thread at ffffffff81060513 #20 [ffff88021f007ee8] kthread at ffffffff810648b6 #21 [ffff88021f007f48] kernel_thread_helper at ffffffff813c40f4 Signed-off-by: Yi Zou Tested-by: Ross Brattain Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 068870483f8d..3dc6cef58107 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4330,6 +4330,10 @@ static int ixgbe_set_num_queues(struct ixgbe_adapter *adapter) adapter->num_tx_queues = 1; done: + if ((adapter->netdev->reg_state == NETREG_UNREGISTERED) || + (adapter->netdev->reg_state == NETREG_UNREGISTERING)) + return 0; + /* Notify the stack of the (possibly) reduced queue counts. */ netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues); return netif_set_real_num_rx_queues(adapter->netdev, -- cgit v1.2.3-55-g7522 From 5facb8e0c4dc1c8c47b71fd7f376defe16185733 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 28 Jan 2012 01:22:35 +0000 Subject: ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state Users expect the up2tc mapping to be maintained across a DCB enable/disable/enable transition. And since we maintain all the other DCB attributes we should do this for up2tc mappings as well just to be consistent. Also without this we break user space applications that expect this to occur that previously worked. Signed-off-by: John Fastabend Tested-by: Stephen Ko Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index 005e5f25600d..79a92fe987b9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -112,6 +112,8 @@ static u8 ixgbe_dcbnl_get_state(struct net_device *netdev) static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) { u8 err = 0; + u8 prio_tc[MAX_USER_PRIORITY] = {0}; + int i; struct ixgbe_adapter *adapter = netdev_priv(netdev); /* Fail command if not in CEE mode */ @@ -122,10 +124,15 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) if (!!state != !(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) return err; - if (state > 0) + if (state > 0) { err = ixgbe_setup_tc(netdev, adapter->dcb_cfg.num_tcs.pg_tcs); - else + ixgbe_dcb_unpack_map(&adapter->dcb_cfg, DCB_TX_CONFIG, prio_tc); + } else { err = ixgbe_setup_tc(netdev, 0); + } + + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + netdev_set_prio_tc_map(netdev, i, prio_tc[i]); return err; } -- cgit v1.2.3-55-g7522 From 9cc00b51a3cbb3b933065a55eaa9bfc306411b7a Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 28 Jan 2012 03:32:17 +0000 Subject: ixgbe: ethtool: stats user buffer overrun If the number of tx/rx queues changes the ethtool ioctl ETHTOOL_GSTATS may overrun the userspace buffer. This occurs because the general practice in user space to query stats is to issue a ETHTOOL_GSSET cmd to learn the buffer size needed, allocate the buffer, then call ETHTOOL_GSTIRNGS and ETHTOOL_GSTATS. If the number of real_num_queues is changed or flow control attributes are changed after ETHTOOL_GSSET but before the ETHTOOL_GSTRINGS/ETHTOOL_GSTATS a user space buffer overrun occurs. To fix the overrun always return the max buffer size needed from get_sset_count() then return all strings and stats from get_strings()/get_ethtool_stats(). This _will_ change the output from the ioctl() call which could break applications and script parsing in theory. I believe these changes should not break existing tools because the only changes will be more {tx|rx}_queues and the {tx|rx}_pb_* stats will always be returned. Existing scripts already need to handle changing number of queues because this occurs today depending on system and current features. The {tx|rx}_pb_* stats are at the end of the output and should be handled by scripts today regardless. Finally get_ethtool_stats and get_strings are free-form outputs tools parsing these outputs should be defensive anyways. In the end these updates are better then having a tool segfault because of a buffer overrun. Signed-off-by: John Fastabend Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 88 ++++++++++++++---------- 1 file changed, 51 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 1f31a04d3c91..a62975480e37 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -120,19 +120,23 @@ static const struct ixgbe_stats ixgbe_gstrings_stats[] = { #endif /* IXGBE_FCOE */ }; -#define IXGBE_QUEUE_STATS_LEN \ - ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_tx_queues + \ - ((struct ixgbe_adapter *)netdev_priv(netdev))->num_rx_queues) * \ +/* ixgbe allocates num_tx_queues and num_rx_queues symmetrically so + * we set the num_rx_queues to evaluate to num_tx_queues. This is + * used because we do not have a good way to get the max number of + * rx queues with CONFIG_RPS disabled. + */ +#define IXGBE_NUM_RX_QUEUES netdev->num_tx_queues + +#define IXGBE_QUEUE_STATS_LEN ( \ + (netdev->num_tx_queues + IXGBE_NUM_RX_QUEUES) * \ (sizeof(struct ixgbe_queue_stats) / sizeof(u64))) #define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats) #define IXGBE_PB_STATS_LEN ( \ - (((struct ixgbe_adapter *)netdev_priv(netdev))->flags & \ - IXGBE_FLAG_DCB_ENABLED) ? \ - (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \ - sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \ - sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \ - sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \ - / sizeof(u64) : 0) + (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \ + / sizeof(u64)) #define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + \ IXGBE_PB_STATS_LEN + \ IXGBE_QUEUE_STATS_LEN) @@ -1078,8 +1082,15 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev, data[i] = (ixgbe_gstrings_stats[i].sizeof_stat == sizeof(u64)) ? *(u64 *)p : *(u32 *)p; } - for (j = 0; j < adapter->num_tx_queues; j++) { + for (j = 0; j < IXGBE_NUM_RX_QUEUES; j++) { ring = adapter->tx_ring[j]; + if (!ring) { + data[i] = 0; + data[i+1] = 0; + i += 2; + continue; + } + do { start = u64_stats_fetch_begin_bh(&ring->syncp); data[i] = ring->stats.packets; @@ -1087,8 +1098,15 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev, } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); i += 2; } - for (j = 0; j < adapter->num_rx_queues; j++) { + for (j = 0; j < IXGBE_NUM_RX_QUEUES; j++) { ring = adapter->rx_ring[j]; + if (!ring) { + data[i] = 0; + data[i+1] = 0; + i += 2; + continue; + } + do { start = u64_stats_fetch_begin_bh(&ring->syncp); data[i] = ring->stats.packets; @@ -1096,22 +1114,20 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev, } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); i += 2; } - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - for (j = 0; j < MAX_TX_PACKET_BUFFERS; j++) { - data[i++] = adapter->stats.pxontxc[j]; - data[i++] = adapter->stats.pxofftxc[j]; - } - for (j = 0; j < MAX_RX_PACKET_BUFFERS; j++) { - data[i++] = adapter->stats.pxonrxc[j]; - data[i++] = adapter->stats.pxoffrxc[j]; - } + + for (j = 0; j < IXGBE_MAX_PACKET_BUFFERS; j++) { + data[i++] = adapter->stats.pxontxc[j]; + data[i++] = adapter->stats.pxofftxc[j]; + } + for (j = 0; j < IXGBE_MAX_PACKET_BUFFERS; j++) { + data[i++] = adapter->stats.pxonrxc[j]; + data[i++] = adapter->stats.pxoffrxc[j]; } } static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, u8 *data) { - struct ixgbe_adapter *adapter = netdev_priv(netdev); char *p = (char *)data; int i; @@ -1126,31 +1142,29 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, ETH_GSTRING_LEN); p += ETH_GSTRING_LEN; } - for (i = 0; i < adapter->num_tx_queues; i++) { + for (i = 0; i < netdev->num_tx_queues; i++) { sprintf(p, "tx_queue_%u_packets", i); p += ETH_GSTRING_LEN; sprintf(p, "tx_queue_%u_bytes", i); p += ETH_GSTRING_LEN; } - for (i = 0; i < adapter->num_rx_queues; i++) { + for (i = 0; i < IXGBE_NUM_RX_QUEUES; i++) { sprintf(p, "rx_queue_%u_packets", i); p += ETH_GSTRING_LEN; sprintf(p, "rx_queue_%u_bytes", i); p += ETH_GSTRING_LEN; } - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { - sprintf(p, "tx_pb_%u_pxon", i); - p += ETH_GSTRING_LEN; - sprintf(p, "tx_pb_%u_pxoff", i); - p += ETH_GSTRING_LEN; - } - for (i = 0; i < MAX_RX_PACKET_BUFFERS; i++) { - sprintf(p, "rx_pb_%u_pxon", i); - p += ETH_GSTRING_LEN; - sprintf(p, "rx_pb_%u_pxoff", i); - p += ETH_GSTRING_LEN; - } + for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) { + sprintf(p, "tx_pb_%u_pxon", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_pb_%u_pxoff", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) { + sprintf(p, "rx_pb_%u_pxon", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_pb_%u_pxoff", i); + p += ETH_GSTRING_LEN; } /* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */ break; -- cgit v1.2.3-55-g7522 From 0ba5f66836c9253c67c469fb4016f94ea30ff2ce Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 19:50:36 -0700 Subject: tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode In the (default) PIO mode, use a one-byte RX FIFO threshold. The OMAP UART IP blocks do not appear to be capable of waking the system under an RX timeout condition. Since the previous RX FIFO threshold was 16 bytes, this meant that omap-serial.c did not become aware of any received data until all those bytes arrived or until another UART interrupt occurred. This made the serial console and presumably other serial applications (GPS, serial Bluetooth) unusable or extremely slow. A 1-byte RX FIFO threshold also allows the MPU to enter a low-power consumption state while waiting for the FIFO to fill. This can be verified using the serial console by comparing the behavior when "0123456789abcde" is pasted in from another window, with the behavior when "0123456789abcdef" is pasted in. Since the former string is less than sixteen bytes long, the string is not echoed for some time, while the latter string is echoed immediately. DMA operation is unaffected by this patch. Thanks to Russell King - ARM Linux for some additional information on the standard behavior of the RX timeout event, which was used to improve this commit description. Signed-off-by: Paul Walmsley Cc: Tomi Valkeinen Cc: Govindraj Raja Cc: Alan Cox Cc: Russell King Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 1c2426931484..a3f5ea46f345 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -46,6 +46,13 @@ #define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ +/* SCR register bitmasks */ +#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) + +/* FCR register bitmasks */ +#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6 +#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6) + static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ @@ -811,14 +818,21 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->mcr = serial_in(up, UART_MCR); serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); /* FIFO ENABLE, DMA MODE */ - serial_out(up, UART_FCR, up->fcr); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; if (up->use_dma) { serial_out(up, UART_TI752_TLR, 0); - up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8); + up->scr |= UART_FCR_TRIGGER_4; + } else { + /* Set receive FIFO threshold to 1 byte */ + up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK; + up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT); } + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_OMAP_SCR, up->scr); serial_out(up, UART_EFR, up->efr); -- cgit v1.2.3-55-g7522 From be4b0281956c5cae4f63f31f11d07625a6988766 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 19:50:52 -0700 Subject: tty: serial: OMAP: block idle while the UART is transferring data in PIO mode Prevent OMAP UARTs from going idle while they are still transferring data in PIO mode. This works around an oversight in the OMAP UART hardware present in OMAP34xx and earlier: an idle UART won't send a wakeup when the TX FIFO threshold is reached. This causes long delays during data transmission when the MPU powerdomain enters a low-power mode. The MPU interrupt controller is not able to respond to interrupts when it's in a low-power state, so the TX buffer is not refilled until another wakeup event occurs. This fix changes the erratum i291 DMA idle workaround. Rather than toggling between force-idle and no-idle, it will toggle between smart-idle and no-idle. The important part of the workaround is the no-idle part, so this shouldn't result in any change in behavior. This fix should work on all OMAP UARTs. Future patches intended for the 3.4 merge window will make this workaround conditional on a "feature" flag, and will use the OMAP36xx+ TX event wakeup support. Thanks to Kevin Hilman for mentioning the erratum i291 workaround, which led to the development of this approach. Signed-off-by: Paul Walmsley Cc: Alan Cox Cc: Tomi Valkeinen Acked-by: Govindraj.R Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-omap2/serial.c | 8 ++++---- drivers/tty/serial/omap-serial.c | 7 +++++++ 2 files changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 247d89478f24..f590afc1f673 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -107,18 +107,18 @@ static void omap_uart_set_noidle(struct platform_device *pdev) omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_forceidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); } #else static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) {} static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_forceidle(struct platform_device *pdev) {} +static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -349,7 +349,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_forceidle; + omap_up.set_forceidle = omap_uart_set_smartidle; omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index a3f5ea46f345..18d13248d9ba 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -136,6 +136,7 @@ static void serial_omap_enable_ms(struct uart_port *port) static void serial_omap_stop_tx(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; + struct omap_uart_port_info *pdata = up->pdev->dev.platform_data; if (up->use_dma && up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) { @@ -158,6 +159,9 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } + if (!up->use_dma && pdata->set_forceidle) + pdata->set_forceidle(up->pdev); + pm_runtime_mark_last_busy(&up->pdev->dev); pm_runtime_put_autosuspend(&up->pdev->dev); } @@ -286,6 +290,7 @@ static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) static void serial_omap_start_tx(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; + struct omap_uart_port_info *pdata = up->pdev->dev.platform_data; struct circ_buf *xmit; unsigned int start; int ret = 0; @@ -293,6 +298,8 @@ static void serial_omap_start_tx(struct uart_port *port) if (!up->use_dma) { pm_runtime_get_sync(&up->pdev->dev); serial_omap_enable_ier_thri(up); + if (pdata->set_noidle) + pdata->set_noidle(up->pdev); pm_runtime_mark_last_busy(&up->pdev->dev); pm_runtime_put_autosuspend(&up->pdev->dev); return; -- cgit v1.2.3-55-g7522 From 197234520bd83aba2199add57a9d2678ee7f9781 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 19:50:56 -0700 Subject: tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds The receive FIFO wakeup latency estimate in the omap-serial driver is three orders of magnitude too small. This effectively prevents the MPU from going to a low-power state when CONFIG_CPU_IDLE=y. This is a major power management regression and masks some other FIFO-related bugs in the driver. Fix by correcting the most egregious problem in the RX wakeup latency estimate. There are several other flaws in the estimator; these will be fixed by a separate patch series intended for 3.4. The difference in low-power states with this patch can be observed via debugfs in pm_debug/count. This estimate does not have any effect when CONFIG_CPU_IDLE=n. Signed-off-by: Paul Walmsley Cc: Tomi Valkeinen Cc: Alan Cox Acked-by: Govindraj.R Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 18d13248d9ba..f80904145fd4 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -740,8 +740,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, quot = serial_omap_get_divisor(port, baud); /* calculate wakeup latency constraint */ - up->calc_latency = (1000000 * up->port.fifosize) / - (1000 * baud / 8); + up->calc_latency = (USEC_PER_SEC * up->port.fifosize) / (baud / 8); up->latency = up->calc_latency; schedule_work(&up->qos_work); -- cgit v1.2.3-55-g7522 From a1c1baf00e5c08dda9c0ee25658bf0ce301102ae Mon Sep 17 00:00:00 2001 From: Nikolaus Schulz Date: Wed, 8 Feb 2012 18:56:11 +0100 Subject: hwmon: (f75375s) Let f75375_update_device treat pwmX as a measured value Treat pwmX as a measured value, not as a (mostly static) limit value, so that it is updated more frequently from the device register. Signed-off-by: Nikolaus Schulz Signed-off-by: Guenter Roeck --- drivers/hwmon/f75375s.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 0aabaaf359ac..f609b5727ba9 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -200,9 +200,6 @@ static struct f75375_data *f75375_update_device(struct device *dev) f75375_read16(client, F75375_REG_FAN_MIN(nr)); data->fan_target[nr] = f75375_read16(client, F75375_REG_FAN_EXP(nr)); - data->pwm[nr] = f75375_read8(client, - F75375_REG_FAN_PWM_DUTY(nr)); - } for (nr = 0; nr < 4; nr++) { data->in_max[nr] = @@ -218,6 +215,8 @@ static struct f75375_data *f75375_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { for (nr = 0; nr < 2; nr++) { + data->pwm[nr] = f75375_read8(client, + F75375_REG_FAN_PWM_DUTY(nr)); /* assign MSB, therefore shift it by 8 bits */ data->temp11[nr] = f75375_read8(client, F75375_REG_TEMP(nr)) << 8; -- cgit v1.2.3-55-g7522 From 5a46e0f95664bb65e3256f3c53b14b8a627c656b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 9 Feb 2012 00:46:47 +0000 Subject: isdn: type bug in isdn_net_header() We use len to store the return value from eth_header(). eth_header() can return -ETH_HLEN (-14). We want to pass this back instead of truncating it to 65522 and returning that. Signed-off-by: Dan Carpenter Acked-by: Neil Horman Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index 2339d7396b9e..802ab87a78b6 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1901,7 +1901,7 @@ static int isdn_net_header(struct sk_buff *skb, struct net_device *dev, { isdn_net_local *lp = netdev_priv(dev); unsigned char *p; - ushort len = 0; + int len = 0; switch (lp->p_encap) { case ISDN_NET_ENCAP_ETHER: -- cgit v1.2.3-55-g7522 From 027a3b617c5490b5287d98921675abcbebeb32df Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 9 Feb 2012 00:49:34 +0000 Subject: bna: fix error handling of bnad_get_flash_partition_by_offset() The current error handling doesn't work because we flash_part is a u32 so the checks for negative error codes don't work. I considered making things signed but I don't know the hardware enough to say if that's a problem. Really, we don't use the error codes so just returning zero for all problems is fine. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c index 9b44ec8096ba..803ea32aa99d 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c +++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c @@ -946,7 +946,7 @@ bnad_get_flash_partition_by_offset(struct bnad *bnad, u32 offset, flash_attr = kzalloc(sizeof(struct bfa_flash_attr), GFP_KERNEL); if (!flash_attr) - return -ENOMEM; + return 0; fcomp.bnad = bnad; fcomp.comp_status = 0; @@ -958,7 +958,7 @@ bnad_get_flash_partition_by_offset(struct bnad *bnad, u32 offset, if (ret != BFA_STATUS_OK) { spin_unlock_irqrestore(&bnad->bna_lock, flags); kfree(flash_attr); - goto out_err; + return 0; } spin_unlock_irqrestore(&bnad->bna_lock, flags); wait_for_completion(&fcomp.comp); @@ -978,8 +978,6 @@ bnad_get_flash_partition_by_offset(struct bnad *bnad, u32 offset, } kfree(flash_attr); return flash_part; -out_err: - return -EINVAL; } static int @@ -1006,7 +1004,7 @@ bnad_get_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom, /* Query the flash partition based on the offset */ flash_part = bnad_get_flash_partition_by_offset(bnad, eeprom->offset, &base_offset); - if (flash_part <= 0) + if (flash_part == 0) return -EFAULT; fcomp.bnad = bnad; @@ -1048,7 +1046,7 @@ bnad_set_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom, /* Query the flash partition based on the offset */ flash_part = bnad_get_flash_partition_by_offset(bnad, eeprom->offset, &base_offset); - if (flash_part <= 0) + if (flash_part == 0) return -EFAULT; fcomp.bnad = bnad; -- cgit v1.2.3-55-g7522