From f95f3850f7a9e1d49ebc5b6e72e7cc3ec3685b0b Mon Sep 17 00:00:00 2001 From: Will Newton Date: Sun, 2 Jan 2011 01:11:59 -0500 Subject: mmc: dw_mmc: Add Synopsys DesignWare mmc host driver. This adds the mmc host driver for the Synopsys DesignWare mmc host controller, found in a number of embedded SoC designs. Signed-off-by: Will Newton Reviewed-by: Matt Fleming Reviewed-by: Chris Ball Signed-off-by: Chris Ball --- include/linux/mmc/dw_mmc.h | 217 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 217 insertions(+) create mode 100644 include/linux/mmc/dw_mmc.h (limited to 'include/linux') diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h new file mode 100644 index 000000000000..16b0261763ed --- /dev/null +++ b/include/linux/mmc/dw_mmc.h @@ -0,0 +1,217 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * (Based on NXP driver for lpc 31xx) + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _LINUX_MMC_DW_MMC_H_ +#define _LINUX_MMC_DW_MMC_H_ + +#define MAX_MCI_SLOTS 2 + +enum dw_mci_state { + STATE_IDLE = 0, + STATE_SENDING_CMD, + STATE_SENDING_DATA, + STATE_DATA_BUSY, + STATE_SENDING_STOP, + STATE_DATA_ERROR, +}; + +enum { + EVENT_CMD_COMPLETE = 0, + EVENT_XFER_COMPLETE, + EVENT_DATA_COMPLETE, + EVENT_DATA_ERROR, + EVENT_XFER_ERROR +}; + +struct mmc_data; + +/** + * struct dw_mci - MMC controller state shared between all slots + * @lock: Spinlock protecting the queue and associated data. + * @regs: Pointer to MMIO registers. + * @sg: Scatterlist entry currently being processed by PIO code, if any. + * @pio_offset: Offset into the current scatterlist entry. + * @cur_slot: The slot which is currently using the controller. + * @mrq: The request currently being processed on @cur_slot, + * or NULL if the controller is idle. + * @cmd: The command currently being sent to the card, or NULL. + * @data: The data currently being transferred, or NULL if no data + * transfer is in progress. + * @use_dma: Whether DMA channel is initialized or not. + * @sg_dma: Bus address of DMA buffer. + * @sg_cpu: Virtual address of DMA buffer. + * @dma_ops: Pointer to platform-specific DMA callbacks. + * @cmd_status: Snapshot of SR taken upon completion of the current + * command. Only valid when EVENT_CMD_COMPLETE is pending. + * @data_status: Snapshot of SR taken upon completion of the current + * data transfer. Only valid when EVENT_DATA_COMPLETE or + * EVENT_DATA_ERROR is pending. + * @stop_cmdr: Value to be loaded into CMDR when the stop command is + * to be sent. + * @dir_status: Direction of current transfer. + * @tasklet: Tasklet running the request state machine. + * @card_tasklet: Tasklet handling card detect. + * @pending_events: Bitmask of events flagged by the interrupt handler + * to be processed by the tasklet. + * @completed_events: Bitmask of events which the state machine has + * processed. + * @state: Tasklet state. + * @queue: List of slots waiting for access to the controller. + * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus + * rate and timeout calculations. + * @current_speed: Configured rate of the controller. + * @num_slots: Number of slots available. + * @pdev: Platform device associated with the MMC controller. + * @pdata: Platform data associated with the MMC controller. + * @slot: Slots sharing this MMC controller. + * @data_shift: log2 of FIFO item size. + * @push_data: Pointer to FIFO push function. + * @pull_data: Pointer to FIFO pull function. + * @quirks: Set of quirks that apply to specific versions of the IP. + * + * Locking + * ======= + * + * @lock is a softirq-safe spinlock protecting @queue as well as + * @cur_slot, @mrq and @state. These must always be updated + * at the same time while holding @lock. + * + * The @mrq field of struct dw_mci_slot is also protected by @lock, + * and must always be written at the same time as the slot is added to + * @queue. + * + * @pending_events and @completed_events are accessed using atomic bit + * operations, so they don't need any locking. + * + * None of the fields touched by the interrupt handler need any + * locking. However, ordering is important: Before EVENT_DATA_ERROR or + * EVENT_DATA_COMPLETE is set in @pending_events, all data-related + * interrupts must be disabled and @data_status updated with a + * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the + * CMDRDY interupt must be disabled and @cmd_status updated with a + * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the + * bytes_xfered field of @data must be written. This is ensured by + * using barriers. + */ +struct dw_mci { + spinlock_t lock; + void __iomem *regs; + + struct scatterlist *sg; + unsigned int pio_offset; + + struct dw_mci_slot *cur_slot; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + + /* DMA interface members*/ + int use_dma; + + dma_addr_t sg_dma; + void *sg_cpu; + struct dw_mci_dma_ops *dma_ops; +#ifdef CONFIG_MMC_DW_IDMAC + unsigned int ring_size; +#else + struct dw_mci_dma_data *dma_data; +#endif + u32 cmd_status; + u32 data_status; + u32 stop_cmdr; + u32 dir_status; + struct tasklet_struct tasklet; + struct tasklet_struct card_tasklet; + unsigned long pending_events; + unsigned long completed_events; + enum dw_mci_state state; + struct list_head queue; + + u32 bus_hz; + u32 current_speed; + u32 num_slots; + struct platform_device *pdev; + struct dw_mci_board *pdata; + struct dw_mci_slot *slot[MAX_MCI_SLOTS]; + + /* FIFO push and pull */ + int data_shift; + void (*push_data)(struct dw_mci *host, void *buf, int cnt); + void (*pull_data)(struct dw_mci *host, void *buf, int cnt); + + /* Workaround flags */ + u32 quirks; +}; + +/* DMA ops for Internal/External DMAC interface */ +struct dw_mci_dma_ops { + /* DMA Ops */ + int (*init)(struct dw_mci *host); + void (*start)(struct dw_mci *host, unsigned int sg_len); + void (*complete)(struct dw_mci *host); + void (*stop)(struct dw_mci *host); + void (*cleanup)(struct dw_mci *host); + void (*exit)(struct dw_mci *host); +}; + +/* IP Quirks/flags. */ +/* No special quirks or flags to cater for */ +#define DW_MCI_QUIRK_NONE 0 +/* DTO fix for command transmission with IDMAC configured */ +#define DW_MCI_QUIRK_IDMAC_DTO 1 +/* delay needed between retries on some 2.11a implementations */ +#define DW_MCI_QUIRK_RETRY_DELAY 2 +/* High Speed Capable - Supports HS cards (upto 50MHz) */ +#define DW_MCI_QUIRK_HIGHSPEED 4 + + +struct dma_pdata; + +struct block_settings { + unsigned short max_segs; /* see blk_queue_max_segments */ + unsigned int max_blk_size; /* maximum size of one mmc block */ + unsigned int max_blk_count; /* maximum number of blocks in one req*/ + unsigned int max_req_size; /* maximum number of bytes in one req*/ + unsigned int max_seg_size; /* see blk_queue_max_segment_size */ +}; + +/* Board platform data */ +struct dw_mci_board { + u32 num_slots; + + u32 quirks; /* Workaround / Quirk flags */ + unsigned int bus_hz; /* Bus speed */ + + /* delay in mS before detecting cards after interrupt */ + u32 detect_delay_ms; + + int (*init)(u32 slot_id, irq_handler_t , void *); + int (*get_ro)(u32 slot_id); + int (*get_cd)(u32 slot_id); + int (*get_ocr)(u32 slot_id); + int (*get_bus_wd)(u32 slot_id); + /* + * Enable power to selected slot and set voltage to desired level. + * Voltage levels are specified using MMC_VDD_xxx defines defined + * in linux/mmc/host.h file. + */ + void (*setpower)(u32 slot_id, u32 volt); + void (*exit)(u32 slot_id); + void (*select_slot)(u32 slot_id); + + struct dw_mci_dma_ops *dma_ops; + struct dma_pdata *data; + struct block_settings *blk_settings; +}; + +#endif /* _LINUX_MMC_DW_MMC_H_ */ -- cgit v1.2.3-55-g7522