From d34d2baa9173f6e0c0f22d005d18e83d1cb54d8d Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Thu, 30 May 2019 00:42:30 +0300 Subject: net: dsa: tag_8021q: Change order of rx_vid setup The 802.1Q tagging performs an unbalanced setup in terms of RX VIDs on the CPU port. For the ingress path of a 802.1Q switch to work, the RX VID of a port needs to be seen as tagged egress on the CPU port. While configuring the other front-panel ports to be part of this VID, for bridge scenarios, the untagged flag is applied even on the CPU port in dsa_switch_vlan_add. This happens because DSA applies the same flags on the CPU port as on the (bridge-controlled) slave ports, and the effect in this case is that the CPU port tagged settings get deleted. Instead of fixing DSA by introducing a way to control VLAN flags on the CPU port (and hence stop inheriting from the slave ports) - a hard, perhaps intractable problem - avoid this situation by moving the setup part of the RX VID on the CPU port after all the other front-panel ports have been added to the VID. Fixes: f9bbe4477c30 ("net: dsa: Optional VLAN-based port separation for switches without tagging") Signed-off-by: Ioana Ciornei Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- net/dsa/tag_8021q.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'net/dsa') diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c index 8ae48c7e1e76..4adec6bbfe59 100644 --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -128,10 +128,7 @@ int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int port, bool enabled) u16 flags; if (i == upstream) - /* CPU port needs to see this port's RX VID - * as tagged egress. - */ - flags = 0; + continue; else if (i == port) /* The RX VID is pvid on this port */ flags = BRIDGE_VLAN_INFO_UNTAGGED | @@ -150,6 +147,20 @@ int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int port, bool enabled) return err; } } + + /* CPU port needs to see this port's RX VID + * as tagged egress. + */ + if (enabled) + err = dsa_port_vid_add(upstream_dp, rx_vid, 0); + else + err = dsa_port_vid_del(upstream_dp, rx_vid); + if (err) { + dev_err(ds->dev, "Failed to apply RX VID %d to port %d: %d\n", + rx_vid, port, err); + return err; + } + /* Finally apply the TX VID on this port and on the CPU port */ if (enabled) err = dsa_port_vid_add(dp, tx_vid, BRIDGE_VLAN_INFO_UNTAGGED); -- cgit v1.2.3-55-g7522 From 0471dd429cea6507a4000169ff6a33f41ba371b3 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 30 May 2019 00:42:31 +0300 Subject: net: dsa: tag_8021q: Create a stable binary format Tools like tcpdump need to be able to decode the significance of fake VLAN headers that DSA uses to separate switch ports. But currently these have no global significance - they are simply an ordered list of DSA_MAX_SWITCHES x DSA_MAX_PORTS numbers ending at 4095. The reason why this is submitted as a fix is that the existing mapping of VIDs should not enter into a stable kernel, so we can pretend that only the new format exists. This way tcpdump won't need to try to make something out of the VLAN tags on 5.2 kernels. Fixes: f9bbe4477c30 ("net: dsa: Optional VLAN-based port separation for switches without tagging") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- net/dsa/tag_8021q.c | 60 ++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 50 insertions(+), 10 deletions(-) (limited to 'net/dsa') diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c index 4adec6bbfe59..65a35e976d7b 100644 --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -11,20 +11,59 @@ #include "dsa_priv.h" -/* Allocating two VLAN tags per port - one for the RX VID and - * the other for the TX VID - see below +/* Binary structure of the fake 12-bit VID field (when the TPID is + * ETH_P_DSA_8021Q): + * + * | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + * +-----------+-----+-----------------+-----------+-----------------------+ + * | DIR | RSV | SWITCH_ID | RSV | PORT | + * +-----------+-----+-----------------+-----------+-----------------------+ + * + * DIR - VID[11:10]: + * Direction flags. + * * 1 (0b01) for RX VLAN, + * * 2 (0b10) for TX VLAN. + * These values make the special VIDs of 0, 1 and 4095 to be left + * unused by this coding scheme. + * + * RSV - VID[9]: + * To be used for further expansion of SWITCH_ID or for other purposes. + * + * SWITCH_ID - VID[8:6]: + * Index of switch within DSA tree. Must be between 0 and + * DSA_MAX_SWITCHES - 1. + * + * RSV - VID[5:4]: + * To be used for further expansion of PORT or for other purposes. + * + * PORT - VID[3:0]: + * Index of switch port. Must be between 0 and DSA_MAX_PORTS - 1. */ -#define DSA_8021Q_VID_RANGE (DSA_MAX_SWITCHES * DSA_MAX_PORTS) -#define DSA_8021Q_VID_BASE (VLAN_N_VID - 2 * DSA_8021Q_VID_RANGE - 1) -#define DSA_8021Q_RX_VID_BASE (DSA_8021Q_VID_BASE) -#define DSA_8021Q_TX_VID_BASE (DSA_8021Q_VID_BASE + DSA_8021Q_VID_RANGE) + +#define DSA_8021Q_DIR_SHIFT 10 +#define DSA_8021Q_DIR_MASK GENMASK(11, 10) +#define DSA_8021Q_DIR(x) (((x) << DSA_8021Q_DIR_SHIFT) & \ + DSA_8021Q_DIR_MASK) +#define DSA_8021Q_DIR_RX DSA_8021Q_DIR(1) +#define DSA_8021Q_DIR_TX DSA_8021Q_DIR(2) + +#define DSA_8021Q_SWITCH_ID_SHIFT 6 +#define DSA_8021Q_SWITCH_ID_MASK GENMASK(8, 6) +#define DSA_8021Q_SWITCH_ID(x) (((x) << DSA_8021Q_SWITCH_ID_SHIFT) & \ + DSA_8021Q_SWITCH_ID_MASK) + +#define DSA_8021Q_PORT_SHIFT 0 +#define DSA_8021Q_PORT_MASK GENMASK(3, 0) +#define DSA_8021Q_PORT(x) (((x) << DSA_8021Q_PORT_SHIFT) & \ + DSA_8021Q_PORT_MASK) /* Returns the VID to be inserted into the frame from xmit for switch steering * instructions on egress. Encodes switch ID and port ID. */ u16 dsa_8021q_tx_vid(struct dsa_switch *ds, int port) { - return DSA_8021Q_TX_VID_BASE + (DSA_MAX_PORTS * ds->index) + port; + return DSA_8021Q_DIR_TX | DSA_8021Q_SWITCH_ID(ds->index) | + DSA_8021Q_PORT(port); } EXPORT_SYMBOL_GPL(dsa_8021q_tx_vid); @@ -33,21 +72,22 @@ EXPORT_SYMBOL_GPL(dsa_8021q_tx_vid); */ u16 dsa_8021q_rx_vid(struct dsa_switch *ds, int port) { - return DSA_8021Q_RX_VID_BASE + (DSA_MAX_PORTS * ds->index) + port; + return DSA_8021Q_DIR_RX | DSA_8021Q_SWITCH_ID(ds->index) | + DSA_8021Q_PORT(port); } EXPORT_SYMBOL_GPL(dsa_8021q_rx_vid); /* Returns the decoded switch ID from the RX VID. */ int dsa_8021q_rx_switch_id(u16 vid) { - return ((vid - DSA_8021Q_RX_VID_BASE) / DSA_MAX_PORTS); + return (vid & DSA_8021Q_SWITCH_ID_MASK) >> DSA_8021Q_SWITCH_ID_SHIFT; } EXPORT_SYMBOL_GPL(dsa_8021q_rx_switch_id); /* Returns the decoded port ID from the RX VID. */ int dsa_8021q_rx_source_port(u16 vid) { - return ((vid - DSA_8021Q_RX_VID_BASE) % DSA_MAX_PORTS); + return (vid & DSA_8021Q_PORT_MASK) >> DSA_8021Q_PORT_SHIFT; } EXPORT_SYMBOL_GPL(dsa_8021q_rx_source_port); -- cgit v1.2.3-55-g7522