From 6f09479758be247fef02188a275383ebaddbe291 Mon Sep 17 00:00:00 2001
From: Jesper Dangaard Brouer
Date: Thu, 21 May 2015 12:17:33 +0200
Subject: pktgen: add sample script pktgen_sample01_simple.sh

Add the first basic pktgen samples script pktgen_sample01_simple.sh,
which demonstrates the a simple use of the helper functions.
Removing pktgen.conf-1-1 as that example should be covered now.

The naming scheme pktgen_sampleNN, where NN is a number, should encourage
reading the samples in a specific order.

Script cause pktgen sending with a single thread and single interface,
and introduce flow variation via random UDP source port.

Usage example and help:
 ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2

Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
  -i : ($DEV)       output interface/device (required)
  -s : ($PKT_SIZE)  packet size
  -d : ($DEST_IP)   destination IP
  -m : ($DST_MAC)   destination MAC-addr
  -c : ($SKB_CLONE) SKB clones send before alloc new SKB
  -v : ($VERBOSE)   verbose
  -x : ($DEBUG)     debug

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 samples/pktgen/pktgen_sample01_simple.sh | 71 ++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100755 samples/pktgen/pktgen_sample01_simple.sh

(limited to 'samples/pktgen/pktgen_sample01_simple.sh')

diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh
new file mode 100755
index 000000000000..8c9d318c221b
--- /dev/null
+++ b/samples/pktgen/pktgen_sample01_simple.sh
@@ -0,0 +1,71 @@
+#!/bin/bash
+#
+# Simple example:
+#  * pktgen sending with single thread and single interface
+#  * flow variation via random UDP source port
+#
+basedir=`dirname $0`
+source ${basedir}/functions.sh
+root_check_run_with_sudo "$@"
+
+# Parameter parsing via include
+# - go look in parameters.sh to see which setting are avail
+# - required param is the interface "-i" stored in $DEV
+source ${basedir}/parameters.sh
+#
+# Set some default params, if they didn't get set
+[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
+[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
+# Example enforce param "-m" for dst_mac
+[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
+
+# Base Config
+DELAY="0"        # Zero means max speed
+COUNT="100000"   # Zero means indefinitely
+
+# Flow variation random source port between min and max
+UDP_MIN=9
+UDP_MAX=109
+
+# General cleanup everything since last run
+# (especially important if other threads were configured by other scripts)
+pg_ctrl "reset"
+
+# Add remove all other devices and add_device $DEV to thread 0
+thread=0
+pg_thread $thread "rem_device_all"
+pg_thread $thread "add_device" $DEV
+
+# How many packets to send (zero means indefinitely)
+pg_set $DEV "count $COUNT"
+
+# Reduce alloc cost by sending same SKB many times
+# - this obviously affects the randomness within the packet
+pg_set $DEV "clone_skb $CLONE_SKB"
+
+# Set packet size
+pg_set $DEV "pkt_size $PKT_SIZE"
+
+# Delay between packets (zero means max speed)
+pg_set $DEV "delay $DELAY"
+
+# Flag example disabling timestamping
+pg_set $DEV "flag NO_TIMESTAMP"
+
+# Destination
+pg_set $DEV "dst_mac $DST_MAC"
+pg_set $DEV "dst $DEST_IP"
+
+# Setup random UDP port src range
+pg_set $DEV "flag UDPSRC_RND"
+pg_set $DEV "udp_src_min $UDP_MIN"
+pg_set $DEV "udp_src_max $UDP_MAX"
+
+# start_run
+echo "Running... ctrl^C to stop" >&2
+pg_ctrl "start"
+echo "Done" >&2
+
+# Print results
+echo "Result device: $DEV"
+cat /proc/net/pktgen/$DEV
-- 
cgit v1.2.3-55-g7522