From e8d776f20f92b9c679bcdcbdf3aee5026d5265f5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 20 Apr 2019 09:20:52 -0300 Subject: docs: x86: move two x86-specific files to x86 arch dir Those two docs belong to the x86 architecture: Documentation/Intel-IOMMU.txt -> Documentation/x86/intel-iommu.rst Documentation/intel_txt.txt -> Documentation/x86/intel_txt.rst Signed-off-by: Mauro Carvalho Chehab --- security/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'security') diff --git a/security/Kconfig b/security/Kconfig index 06a30851511a..0d65594b5196 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -121,7 +121,7 @@ config INTEL_TXT See for more information about Intel(R) TXT. See for more information about tboot. - See Documentation/intel_txt.txt for a description of how to enable + See Documentation/x86/intel_txt.rst for a description of how to enable Intel TXT support in a kernel boot. If you are unsure as to whether this is required, answer N. -- cgit v1.2.3-55-g7522 From da82c92f1150f66afabf78d2c85ef9ac18dc6d38 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 27 Jun 2019 13:08:35 -0300 Subject: docs: cgroup-v1: add it to the admin-guide book Those files belong to the admin guide, so add them. Signed-off-by: Mauro Carvalho Chehab --- .../admin-guide/cgroup-v1/blkio-controller.rst | 302 ++++++ Documentation/admin-guide/cgroup-v1/cgroups.rst | 695 ++++++++++++++ Documentation/admin-guide/cgroup-v1/cpuacct.rst | 50 + Documentation/admin-guide/cgroup-v1/cpusets.rst | 866 +++++++++++++++++ Documentation/admin-guide/cgroup-v1/devices.rst | 132 +++ .../admin-guide/cgroup-v1/freezer-subsystem.rst | 127 +++ Documentation/admin-guide/cgroup-v1/hugetlb.rst | 50 + Documentation/admin-guide/cgroup-v1/index.rst | 28 + Documentation/admin-guide/cgroup-v1/memcg_test.rst | 355 +++++++ Documentation/admin-guide/cgroup-v1/memory.rst | 1003 ++++++++++++++++++++ Documentation/admin-guide/cgroup-v1/net_cls.rst | 44 + Documentation/admin-guide/cgroup-v1/net_prio.rst | 57 ++ Documentation/admin-guide/cgroup-v1/pids.rst | 92 ++ Documentation/admin-guide/cgroup-v1/rdma.rst | 117 +++ Documentation/admin-guide/cgroup-v2.rst | 2 +- Documentation/admin-guide/index.rst | 1 + Documentation/admin-guide/kernel-parameters.txt | 4 +- .../admin-guide/mm/numa_memory_policy.rst | 2 +- Documentation/block/bfq-iosched.rst | 2 +- Documentation/cgroup-v1/blkio-controller.rst | 302 ------ Documentation/cgroup-v1/cgroups.rst | 695 -------------- Documentation/cgroup-v1/cpuacct.rst | 50 - Documentation/cgroup-v1/cpusets.rst | 866 ----------------- Documentation/cgroup-v1/devices.rst | 132 --- Documentation/cgroup-v1/freezer-subsystem.rst | 127 --- Documentation/cgroup-v1/hugetlb.rst | 50 - Documentation/cgroup-v1/index.rst | 30 - Documentation/cgroup-v1/memcg_test.rst | 355 ------- Documentation/cgroup-v1/memory.rst | 1003 -------------------- Documentation/cgroup-v1/net_cls.rst | 44 - Documentation/cgroup-v1/net_prio.rst | 57 -- Documentation/cgroup-v1/pids.rst | 92 -- Documentation/cgroup-v1/rdma.rst | 117 --- Documentation/filesystems/tmpfs.txt | 2 +- Documentation/kernel-per-CPU-kthreads.txt | 2 +- Documentation/scheduler/sched-deadline.rst | 2 +- Documentation/scheduler/sched-design-CFS.rst | 2 +- Documentation/scheduler/sched-rt-group.rst | 2 +- Documentation/vm/numa.rst | 4 +- Documentation/vm/page_migration.rst | 2 +- Documentation/vm/unevictable-lru.rst | 2 +- Documentation/x86/x86_64/fake-numa-for-cpusets.rst | 4 +- MAINTAINERS | 4 +- block/Kconfig | 2 +- include/linux/cgroup-defs.h | 2 +- include/uapi/linux/bpf.h | 2 +- init/Kconfig | 4 +- kernel/cgroup/cpuset.c | 2 +- security/device_cgroup.c | 2 +- tools/include/uapi/linux/bpf.h | 2 +- 50 files changed, 3945 insertions(+), 3946 deletions(-) create mode 100644 Documentation/admin-guide/cgroup-v1/blkio-controller.rst create mode 100644 Documentation/admin-guide/cgroup-v1/cgroups.rst create mode 100644 Documentation/admin-guide/cgroup-v1/cpuacct.rst create mode 100644 Documentation/admin-guide/cgroup-v1/cpusets.rst create mode 100644 Documentation/admin-guide/cgroup-v1/devices.rst create mode 100644 Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst create mode 100644 Documentation/admin-guide/cgroup-v1/hugetlb.rst create mode 100644 Documentation/admin-guide/cgroup-v1/index.rst create mode 100644 Documentation/admin-guide/cgroup-v1/memcg_test.rst create mode 100644 Documentation/admin-guide/cgroup-v1/memory.rst create mode 100644 Documentation/admin-guide/cgroup-v1/net_cls.rst create mode 100644 Documentation/admin-guide/cgroup-v1/net_prio.rst create mode 100644 Documentation/admin-guide/cgroup-v1/pids.rst create mode 100644 Documentation/admin-guide/cgroup-v1/rdma.rst delete mode 100644 Documentation/cgroup-v1/blkio-controller.rst delete mode 100644 Documentation/cgroup-v1/cgroups.rst delete mode 100644 Documentation/cgroup-v1/cpuacct.rst delete mode 100644 Documentation/cgroup-v1/cpusets.rst delete mode 100644 Documentation/cgroup-v1/devices.rst delete mode 100644 Documentation/cgroup-v1/freezer-subsystem.rst delete mode 100644 Documentation/cgroup-v1/hugetlb.rst delete mode 100644 Documentation/cgroup-v1/index.rst delete mode 100644 Documentation/cgroup-v1/memcg_test.rst delete mode 100644 Documentation/cgroup-v1/memory.rst delete mode 100644 Documentation/cgroup-v1/net_cls.rst delete mode 100644 Documentation/cgroup-v1/net_prio.rst delete mode 100644 Documentation/cgroup-v1/pids.rst delete mode 100644 Documentation/cgroup-v1/rdma.rst (limited to 'security') diff --git a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst new file mode 100644 index 000000000000..1d7d962933be --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst @@ -0,0 +1,302 @@ +=================== +Block IO Controller +=================== + +Overview +======== +cgroup subsys "blkio" implements the block io controller. There seems to be +a need of various kinds of IO control policies (like proportional BW, max BW) +both at leaf nodes as well as at intermediate nodes in a storage hierarchy. +Plan is to use the same cgroup based management interface for blkio controller +and based on user options switch IO policies in the background. + +One IO control policy is throttling policy which can be used to +specify upper IO rate limits on devices. This policy is implemented in +generic block layer and can be used on leaf nodes as well as higher +level logical devices like device mapper. + +HOWTO +===== +Throttling/Upper Limit policy +----------------------------- +- Enable Block IO controller:: + + CONFIG_BLK_CGROUP=y + +- Enable throttling in block layer:: + + CONFIG_BLK_DEV_THROTTLING=y + +- Mount blkio controller (see cgroups.txt, Why are cgroups needed?):: + + mount -t cgroup -o blkio none /sys/fs/cgroup/blkio + +- Specify a bandwidth rate on particular device for root group. The format + for policy is ": ":: + + echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device + + Above will put a limit of 1MB/second on reads happening for root group + on device having major/minor number 8:16. + +- Run dd to read a file and see if rate is throttled to 1MB/s or not:: + + # dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024 + 1024+0 records in + 1024+0 records out + 4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s + + Limits for writes can be put using blkio.throttle.write_bps_device file. + +Hierarchical Cgroups +==================== + +Throttling implements hierarchy support; however, +throttling's hierarchy support is enabled iff "sane_behavior" is +enabled from cgroup side, which currently is a development option and +not publicly available. + +If somebody created a hierarchy like as follows:: + + root + / \ + test1 test2 + | + test3 + +Throttling with "sane_behavior" will handle the +hierarchy correctly. For throttling, all limits apply +to the whole subtree while all statistics are local to the IOs +directly generated by tasks in that cgroup. + +Throttling without "sane_behavior" enabled from cgroup side will +practically treat all groups at same level as if it looks like the +following:: + + pivot + / / \ \ + root test1 test2 test3 + +Various user visible config options +=================================== +CONFIG_BLK_CGROUP + - Block IO controller. + +CONFIG_BFQ_CGROUP_DEBUG + - Debug help. Right now some additional stats file show up in cgroup + if this option is enabled. + +CONFIG_BLK_DEV_THROTTLING + - Enable block device throttling support in block layer. + +Details of cgroup files +======================= +Proportional weight policy files +-------------------------------- +- blkio.weight + - Specifies per cgroup weight. This is default weight of the group + on all the devices until and unless overridden by per device rule. + (See blkio.weight_device). + Currently allowed range of weights is from 10 to 1000. + +- blkio.weight_device + - One can specify per cgroup per device rules using this interface. + These rules override the default value of group weight as specified + by blkio.weight. + + Following is the format:: + + # echo dev_maj:dev_minor weight > blkio.weight_device + + Configure weight=300 on /dev/sdb (8:16) in this cgroup:: + + # echo 8:16 300 > blkio.weight_device + # cat blkio.weight_device + dev weight + 8:16 300 + + Configure weight=500 on /dev/sda (8:0) in this cgroup:: + + # echo 8:0 500 > blkio.weight_device + # cat blkio.weight_device + dev weight + 8:0 500 + 8:16 300 + + Remove specific weight for /dev/sda in this cgroup:: + + # echo 8:0 0 > blkio.weight_device + # cat blkio.weight_device + dev weight + 8:16 300 + +- blkio.leaf_weight[_device] + - Equivalents of blkio.weight[_device] for the purpose of + deciding how much weight tasks in the given cgroup has while + competing with the cgroup's child cgroups. For details, + please refer to Documentation/block/cfq-iosched.txt. + +- blkio.time + - disk time allocated to cgroup per device in milliseconds. First + two fields specify the major and minor number of the device and + third field specifies the disk time allocated to group in + milliseconds. + +- blkio.sectors + - number of sectors transferred to/from disk by the group. First + two fields specify the major and minor number of the device and + third field specifies the number of sectors transferred by the + group to/from the device. + +- blkio.io_service_bytes + - Number of bytes transferred to/from the disk by the group. These + are further divided by the type of operation - read or write, sync + or async. First two fields specify the major and minor number of the + device, third field specifies the operation type and the fourth field + specifies the number of bytes. + +- blkio.io_serviced + - Number of IOs (bio) issued to the disk by the group. These + are further divided by the type of operation - read or write, sync + or async. First two fields specify the major and minor number of the + device, third field specifies the operation type and the fourth field + specifies the number of IOs. + +- blkio.io_service_time + - Total amount of time between request dispatch and request completion + for the IOs done by this cgroup. This is in nanoseconds to make it + meaningful for flash devices too. For devices with queue depth of 1, + this time represents the actual service time. When queue_depth > 1, + that is no longer true as requests may be served out of order. This + may cause the service time for a given IO to include the service time + of multiple IOs when served out of order which may result in total + io_service_time > actual time elapsed. This time is further divided by + the type of operation - read or write, sync or async. First two fields + specify the major and minor number of the device, third field + specifies the operation type and the fourth field specifies the + io_service_time in ns. + +- blkio.io_wait_time + - Total amount of time the IOs for this cgroup spent waiting in the + scheduler queues for service. This can be greater than the total time + elapsed since it is cumulative io_wait_time for all IOs. It is not a + measure of total time the cgroup spent waiting but rather a measure of + the wait_time for its individual IOs. For devices with queue_depth > 1 + this metric does not include the time spent waiting for service once + the IO is dispatched to the device but till it actually gets serviced + (there might be a time lag here due to re-ordering of requests by the + device). This is in nanoseconds to make it meaningful for flash + devices too. This time is further divided by the type of operation - + read or write, sync or async. First two fields specify the major and + minor number of the device, third field specifies the operation type + and the fourth field specifies the io_wait_time in ns. + +- blkio.io_merged + - Total number of bios/requests merged into requests belonging to this + cgroup. This is further divided by the type of operation - read or + write, sync or async. + +- blkio.io_queued + - Total number of requests queued up at any given instant for this + cgroup. This is further divided by the type of operation - read or + write, sync or async. + +- blkio.avg_queue_size + - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. + The average queue size for this cgroup over the entire time of this + cgroup's existence. Queue size samples are taken each time one of the + queues of this cgroup gets a timeslice. + +- blkio.group_wait_time + - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. + This is the amount of time the cgroup had to wait since it became busy + (i.e., went from 0 to 1 request queued) to get a timeslice for one of + its queues. This is different from the io_wait_time which is the + cumulative total of the amount of time spent by each IO in that cgroup + waiting in the scheduler queue. This is in nanoseconds. If this is + read when the cgroup is in a waiting (for timeslice) state, the stat + will only report the group_wait_time accumulated till the last time it + got a timeslice and will not include the current delta. + +- blkio.empty_time + - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. + This is the amount of time a cgroup spends without any pending + requests when not being served, i.e., it does not include any time + spent idling for one of the queues of the cgroup. This is in + nanoseconds. If this is read when the cgroup is in an empty state, + the stat will only report the empty_time accumulated till the last + time it had a pending request and will not include the current delta. + +- blkio.idle_time + - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. + This is the amount of time spent by the IO scheduler idling for a + given cgroup in anticipation of a better request than the existing ones + from other queues/cgroups. This is in nanoseconds. If this is read + when the cgroup is in an idling state, the stat will only report the + idle_time accumulated till the last idle period and will not include + the current delta. + +- blkio.dequeue + - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. This + gives the statistics about how many a times a group was dequeued + from service tree of the device. First two fields specify the major + and minor number of the device and third field specifies the number + of times a group was dequeued from a particular device. + +- blkio.*_recursive + - Recursive version of various stats. These files show the + same information as their non-recursive counterparts but + include stats from all the descendant cgroups. + +Throttling/Upper limit policy files +----------------------------------- +- blkio.throttle.read_bps_device + - Specifies upper limit on READ rate from the device. IO rate is + specified in bytes per second. Rules are per device. Following is + the format:: + + echo ": " > /cgrp/blkio.throttle.read_bps_device + +- blkio.throttle.write_bps_device + - Specifies upper limit on WRITE rate to the device. IO rate is + specified in bytes per second. Rules are per device. Following is + the format:: + + echo ": " > /cgrp/blkio.throttle.write_bps_device + +- blkio.throttle.read_iops_device + - Specifies upper limit on READ rate from the device. IO rate is + specified in IO per second. Rules are per device. Following is + the format:: + + echo ": " > /cgrp/blkio.throttle.read_iops_device + +- blkio.throttle.write_iops_device + - Specifies upper limit on WRITE rate to the device. IO rate is + specified in io per second. Rules are per device. Following is + the format:: + + echo ": " > /cgrp/blkio.throttle.write_iops_device + +Note: If both BW and IOPS rules are specified for a device, then IO is + subjected to both the constraints. + +- blkio.throttle.io_serviced + - Number of IOs (bio) issued to the disk by the group. These + are further divided by the type of operation - read or write, sync + or async. First two fields specify the major and minor number of the + device, third field specifies the operation type and the fourth field + specifies the number of IOs. + +- blkio.throttle.io_service_bytes + - Number of bytes transferred to/from the disk by the group. These + are further divided by the type of operation - read or write, sync + or async. First two fields specify the major and minor number of the + device, third field specifies the operation type and the fourth field + specifies the number of bytes. + +Common files among various policies +----------------------------------- +- blkio.reset_stats + - Writing an int to this file will result in resetting all the stats + for that cgroup. diff --git a/Documentation/admin-guide/cgroup-v1/cgroups.rst b/Documentation/admin-guide/cgroup-v1/cgroups.rst new file mode 100644 index 000000000000..b0688011ed06 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/cgroups.rst @@ -0,0 +1,695 @@ +============== +Control Groups +============== + +Written by Paul Menage based on +Documentation/admin-guide/cgroup-v1/cpusets.rst + +Original copyright statements from cpusets.txt: + +Portions Copyright (C) 2004 BULL SA. + +Portions Copyright (c) 2004-2006 Silicon Graphics, Inc. + +Modified by Paul Jackson + +Modified by Christoph Lameter + +.. CONTENTS: + + 1. Control Groups + 1.1 What are cgroups ? + 1.2 Why are cgroups needed ? + 1.3 How are cgroups implemented ? + 1.4 What does notify_on_release do ? + 1.5 What does clone_children do ? + 1.6 How do I use cgroups ? + 2. Usage Examples and Syntax + 2.1 Basic Usage + 2.2 Attaching processes + 2.3 Mounting hierarchies by name + 3. Kernel API + 3.1 Overview + 3.2 Synchronization + 3.3 Subsystem API + 4. Extended attributes usage + 5. Questions + +1. Control Groups +================= + +1.1 What are cgroups ? +---------------------- + +Control Groups provide a mechanism for aggregating/partitioning sets of +tasks, and all their future children, into hierarchical groups with +specialized behaviour. + +Definitions: + +A *cgroup* associates a set of tasks with a set of parameters for one +or more subsystems. + +A *subsystem* is a module that makes use of the task grouping +facilities provided by cgroups to treat groups of tasks in +particular ways. A subsystem is typically a "resource controller" that +schedules a resource or applies per-cgroup limits, but it may be +anything that wants to act on a group of processes, e.g. a +virtualization subsystem. + +A *hierarchy* is a set of cgroups arranged in a tree, such that +every task in the system is in exactly one of the cgroups in the +hierarchy, and a set of subsystems; each subsystem has system-specific +state attached to each cgroup in the hierarchy. Each hierarchy has +an instance of the cgroup virtual filesystem associated with it. + +At any one time there may be multiple active hierarchies of task +cgroups. Each hierarchy is a partition of all tasks in the system. + +User-level code may create and destroy cgroups by name in an +instance of the cgroup virtual file system, specify and query to +which cgroup a task is assigned, and list the task PIDs assigned to +a cgroup. Those creations and assignments only affect the hierarchy +associated with that instance of the cgroup file system. + +On their own, the only use for cgroups is for simple job +tracking. The intention is that other subsystems hook into the generic +cgroup support to provide new attributes for cgroups, such as +accounting/limiting the resources which processes in a cgroup can +access. For example, cpusets (see Documentation/admin-guide/cgroup-v1/cpusets.rst) allow +you to associate a set of CPUs and a set of memory nodes with the +tasks in each cgroup. + +1.2 Why are cgroups needed ? +---------------------------- + +There are multiple efforts to provide process aggregations in the +Linux kernel, mainly for resource-tracking purposes. Such efforts +include cpusets, CKRM/ResGroups, UserBeanCounters, and virtual server +namespaces. These all require the basic notion of a +grouping/partitioning of processes, with newly forked processes ending +up in the same group (cgroup) as their parent process. + +The kernel cgroup patch provides the minimum essential kernel +mechanisms required to efficiently implement such groups. It has +minimal impact on the system fast paths, and provides hooks for +specific subsystems such as cpusets to provide additional behaviour as +desired. + +Multiple hierarchy support is provided to allow for situations where +the division of tasks into cgroups is distinctly different for +different subsystems - having parallel hierarchies allows each +hierarchy to be a natural division of tasks, without having to handle +complex combinations of tasks that would be present if several +unrelated subsystems needed to be forced into the same tree of +cgroups. + +At one extreme, each resource controller or subsystem could be in a +separate hierarchy; at the other extreme, all subsystems +would be attached to the same hierarchy. + +As an example of a scenario (originally proposed by vatsa@in.ibm.com) +that can benefit from multiple hierarchies, consider a large +university server with various users - students, professors, system +tasks etc. The resource planning for this server could be along the +following lines:: + + CPU : "Top cpuset" + / \ + CPUSet1 CPUSet2 + | | + (Professors) (Students) + + In addition (system tasks) are attached to topcpuset (so + that they can run anywhere) with a limit of 20% + + Memory : Professors (50%), Students (30%), system (20%) + + Disk : Professors (50%), Students (30%), system (20%) + + Network : WWW browsing (20%), Network File System (60%), others (20%) + / \ + Professors (15%) students (5%) + +Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd goes +into the NFS network class. + +At the same time Firefox/Lynx will share an appropriate CPU/Memory class +depending on who launched it (prof/student). + +With the ability to classify tasks differently for different resources +(by putting those resource subsystems in different hierarchies), +the admin can easily set up a script which receives exec notifications +and depending on who is launching the browser he can:: + + # echo browser_pid > /sys/fs/cgroup///tasks + +With only a single hierarchy, he now would potentially have to create +a separate cgroup for every browser launched and associate it with +appropriate network and other resource class. This may lead to +proliferation of such cgroups. + +Also let's say that the administrator would like to give enhanced network +access temporarily to a student's browser (since it is night and the user +wants to do online gaming :)) OR give one of the student's simulation +apps enhanced CPU power. + +With ability to write PIDs directly to resource classes, it's just a +matter of:: + + # echo pid > /sys/fs/cgroup/network//tasks + (after some time) + # echo pid > /sys/fs/cgroup/network//tasks + +Without this ability, the administrator would have to split the cgroup into +multiple separate ones and then associate the new cgroups with the +new resource classes. + + + +1.3 How are cgroups implemented ? +--------------------------------- + +Control Groups extends the kernel as follows: + + - Each task in the system has a reference-counted pointer to a + css_set. + + - A css_set contains a set of reference-counted pointers to + cgroup_subsys_state objects, one for each cgroup subsystem + registered in the system. There is no direct link from a task to + the cgroup of which it's a member in each hierarchy, but this + can be determined by following pointers through the + cgroup_subsys_state objects. This is because accessing the + subsystem state is something that's expected to happen frequently + and in performance-critical code, whereas operations that require a + task's actual cgroup assignments (in particular, moving between + cgroups) are less common. A linked list runs through the cg_list + field of each task_struct using the css_set, anchored at + css_set->tasks. + + - A cgroup hierarchy filesystem can be mounted for browsing and + manipulation from user space. + + - You can list all the tasks (by PID) attached to any cgroup. + +The implementation of cgroups requires a few, simple hooks +into the rest of the kernel, none in performance-critical paths: + + - in init/main.c, to initialize the root cgroups and initial + css_set at system boot. + + - in fork and exit, to attach and detach a task from its css_set. + +In addition, a new file system of type "cgroup" may be mounted, to +enable browsing and modifying the cgroups presently known to the +kernel. When mounting a cgroup hierarchy, you may specify a +comma-separated list of subsystems to mount as the filesystem mount +options. By default, mounting the cgroup filesystem attempts to +mount a hierarchy containing all registered subsystems. + +If an active hierarchy with exactly the same set of subsystems already +exists, it will be reused for the new mount. If no existing hierarchy +matches, and any of the requested subsystems are in use in an existing +hierarchy, the mount will fail with -EBUSY. Otherwise, a new hierarchy +is activated, associated with the requested subsystems. + +It's not currently possible to bind a new subsystem to an active +cgroup hierarchy, or to unbind a subsystem from an active cgroup +hierarchy. This may be possible in future, but is fraught with nasty +error-recovery issues. + +When a cgroup filesystem is unmounted, if there are any +child cgroups created below the top-level cgroup, that hierarchy +will remain active even though unmounted; if there are no +child cgroups then the hierarchy will be deactivated. + +No new system calls are added for cgroups - all support for +querying and modifying cgroups is via this cgroup file system. + +Each task under /proc has an added file named 'cgroup' displaying, +for each active hierarchy, the subsystem names and the cgroup name +as the path relative to the root of the cgroup file system. + +Each cgroup is represented by a directory in the cgroup file system +containing the following files describing that cgroup: + + - tasks: list of tasks (by PID) attached to that cgroup. This list + is not guaranteed to be sorted. Writing a thread ID into this file + moves the thread into this cgroup. + - cgroup.procs: list of thread group IDs in the cgroup. This list is + not guaranteed to be sorted or free of duplicate TGIDs, and userspace + should sort/uniquify the list if this property is required. + Writing a thread group ID into this file moves all threads in that + group into this cgroup. + - notify_on_release flag: run the release agent on exit? + - release_agent: the path to use for release notifications (this file + exists in the top cgroup only) + +Other subsystems such as cpusets may add additional files in each +cgroup dir. + +New cgroups are created using the mkdir system call or shell +command. The properties of a cgroup, such as its flags, are +modified by writing to the appropriate file in that cgroups +directory, as listed above. + +The named hierarchical structure of nested cgroups allows partitioning +a large system into nested, dynamically changeable, "soft-partitions". + +The attachment of each task, automatically inherited at fork by any +children of that task, to a cgroup allows organizing the work load +on a system into related sets of tasks. A task may be re-attached to +any other cgroup, if allowed by the permissions on the necessary +cgroup file system directories. + +When a task is moved from one cgroup to another, it gets a new +css_set pointer - if there's an already existing css_set with the +desired collection of cgroups then that group is reused, otherwise a new +css_set is allocated. The appropriate existing css_set is located by +looking into a hash table. + +To allow access from a cgroup to the css_sets (and hence tasks) +that comprise it, a set of cg_cgroup_link objects form a lattice; +each cg_cgroup_link is linked into a list of cg_cgroup_links for +a single cgroup on its cgrp_link_list field, and a list of +cg_cgroup_links for a single css_set on its cg_link_list. + +Thus the set of tasks in a cgroup can be listed by iterating over +each css_set that references the cgroup, and sub-iterating over +each css_set's task set. + +The use of a Linux virtual file system (vfs) to represent the +cgroup hierarchy provides for a familiar permission and name space +for cgroups, with a minimum of additional kernel code. + +1.4 What does notify_on_release do ? +------------------------------------ + +If the notify_on_release flag is enabled (1) in a cgroup, then +whenever the last task in the cgroup leaves (exits or attaches to +some other cgroup) and the last child cgroup of that cgroup +is removed, then the kernel runs the command specified by the contents +of the "release_agent" file in that hierarchy's root directory, +supplying the pathname (relative to the mount point of the cgroup +file system) of the abandoned cgroup. This enables automatic +removal of abandoned cgroups. The default value of +notify_on_release in the root cgroup at system boot is disabled +(0). The default value of other cgroups at creation is the current +value of their parents' notify_on_release settings. The default value of +a cgroup hierarchy's release_agent path is empty. + +1.5 What does clone_children do ? +--------------------------------- + +This flag only affects the cpuset controller. If the clone_children +flag is enabled (1) in a cgroup, a new cpuset cgroup will copy its +configuration from the parent during initialization. + +1.6 How do I use cgroups ? +-------------------------- + +To start a new job that is to be contained within a cgroup, using +the "cpuset" cgroup subsystem, the steps are something like:: + + 1) mount -t tmpfs cgroup_root /sys/fs/cgroup + 2) mkdir /sys/fs/cgroup/cpuset + 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset + 4) Create the new cgroup by doing mkdir's and write's (or echo's) in + the /sys/fs/cgroup/cpuset virtual file system. + 5) Start a task that will be the "founding father" of the new job. + 6) Attach that task to the new cgroup by writing its PID to the + /sys/fs/cgroup/cpuset tasks file for that cgroup. + 7) fork, exec or clone the job tasks from this founding father task. + +For example, the following sequence of commands will setup a cgroup +named "Charlie", containing just CPUs 2 and 3, and Memory Node 1, +and then start a subshell 'sh' in that cgroup:: + + mount -t tmpfs cgroup_root /sys/fs/cgroup + mkdir /sys/fs/cgroup/cpuset + mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset + cd /sys/fs/cgroup/cpuset + mkdir Charlie + cd Charlie + /bin/echo 2-3 > cpuset.cpus + /bin/echo 1 > cpuset.mems + /bin/echo $$ > tasks + sh + # The subshell 'sh' is now running in cgroup Charlie + # The next line should display '/Charlie' + cat /proc/self/cgroup + +2. Usage Examples and Syntax +============================ + +2.1 Basic Usage +--------------- + +Creating, modifying, using cgroups can be done through the cgroup +virtual filesystem. + +To mount a cgroup hierarchy with all available subsystems, type:: + + # mount -t cgroup xxx /sys/fs/cgroup + +The "xxx" is not interpreted by the cgroup code, but will appear in +/proc/mounts so may be any useful identifying string that you like. + +Note: Some subsystems do not work without some user input first. For instance, +if cpusets are enabled the user will have to populate the cpus and mems files +for each new cgroup created before that group can be used. + +As explained in section `1.2 Why are cgroups needed?` you should create +different hierarchies of cgroups for each single resource or group of +resources you want to control. Therefore, you should mount a tmpfs on +/sys/fs/cgroup and create directories for each cgroup resource or resource +group:: + + # mount -t tmpfs cgroup_root /sys/fs/cgroup + # mkdir /sys/fs/cgroup/rg1 + +To mount a cgroup hierarchy with just the cpuset and memory +subsystems, type:: + + # mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1 + +While remounting cgroups is currently supported, it is not recommend +to use it. Remounting allows changing bound subsystems and +release_agent. Rebinding is hardly useful as it only works when the +hierarchy is empty and release_agent itself should be replaced with +conventional fsnotify. The support for remounting will be removed in +the future. + +To Specify a hierarchy's release_agent:: + + # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \ + xxx /sys/fs/cgroup/rg1 + +Note that specifying 'release_agent' more than once will return failure. + +Note that changing the set of subsystems is currently only supported +when the hierarchy consists of a single (root) cgroup. Supporting +the ability to arbitrarily bind/unbind subsystems from an existing +cgroup hierarchy is intended to be implemented in the future. + +Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the +tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1 +is the cgroup that holds the whole system. + +If you want to change the value of release_agent:: + + # echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent + +It can also be changed via remount. + +If you want to create a new cgroup under /sys/fs/cgroup/rg1:: + + # cd /sys/fs/cgroup/rg1 + # mkdir my_cgroup + +Now you want to do something with this cgroup: + + # cd my_cgroup + +In this directory you can find several files:: + + # ls + cgroup.procs notify_on_release tasks + (plus whatever files added by the attached subsystems) + +Now attach your shell to this cgroup:: + + # /bin/echo $$ > tasks + +You can also create cgroups inside your cgroup by using mkdir in this +directory:: + + # mkdir my_sub_cs + +To remove a cgroup, just use rmdir:: + + # rmdir my_sub_cs + +This will fail if the cgroup is in use (has cgroups inside, or +has processes attached, or is held alive by other subsystem-specific +reference). + +2.2 Attaching processes +----------------------- + +:: + + # /bin/echo PID > tasks + +Note that it is PID, not PIDs. You can only attach ONE task at a time. +If you have several tasks to attach, you have to do it one after another:: + + # /bin/echo PID1 > tasks + # /bin/echo PID2 > tasks + ... + # /bin/echo PIDn > tasks + +You can attach the current shell task by echoing 0:: + + # echo 0 > tasks + +You can use the cgroup.procs file instead of the tasks file to move all +threads in a threadgroup at once. Echoing the PID of any task in a +threadgroup to cgroup.procs causes all tasks in that threadgroup to be +attached to the cgroup. Writing 0 to cgroup.procs moves all tasks +in the writing task's threadgroup. + +Note: Since every task is always a member of exactly one cgroup in each +mounted hierarchy, to remove a task from its current cgroup you must +move it into a new cgroup (possibly the root cgroup) by writing to the +new cgroup's tasks file. + +Note: Due to some restrictions enforced by some cgroup subsystems, moving +a process to another cgroup can fail. + +2.3 Mounting hierarchies by name +-------------------------------- + +Passing the name= option when mounting a cgroups hierarchy +associates the given name with the hierarchy. This can be used when +mounting a pre-existing hierarchy, in order to refer to it by name +rather than by its set of active subsystems. Each hierarchy is either +nameless, or has a unique name. + +The name should match [\w.-]+ + +When passing a name= option for a new hierarchy, you need to +specify subsystems manually; the legacy behaviour of mounting all +subsystems when none are explicitly specified is not supported when +you give a subsystem a name. + +The name of the subsystem appears as part of the hierarchy description +in /proc/mounts and /proc//cgroups. + + +3. Kernel API +============= + +3.1 Overview +------------ + +Each kernel subsystem that wants to hook into the generic cgroup +system needs to create a cgroup_subsys object. This contains +various methods, which are callbacks from the cgroup system, along +with a subsystem ID which will be assigned by the cgroup system. + +Other fields in the cgroup_subsys object include: + +- subsys_id: a unique array index for the subsystem, indicating which + entry in cgroup->subsys[] this subsystem should be managing. + +- name: should be initialized to a unique subsystem name. Should be + no longer than MAX_CGROUP_TYPE_NAMELEN. + +- early_init: indicate if the subsystem needs early initialization + at system boot. + +Each cgroup object created by the system has an array of pointers, +indexed by subsystem ID; this pointer is entirely managed by the +subsystem; the generic cgroup code will never touch this pointer. + +3.2 Synchronization +------------------- + +There is a global mutex, cgroup_mutex, used by the cgroup +system. This should be taken by anything that wants to modify a +cgroup. It may also be taken to prevent cgroups from being +modified, but more specific locks may be more appropriate in that +situation. + +See kernel/cgroup.c for more details. + +Subsystems can take/release the cgroup_mutex via the functions +cgroup_lock()/cgroup_unlock(). + +Accessing a task's cgroup pointer may be done in the following ways: +- while holding cgroup_mutex +- while holding the task's alloc_lock (via task_lock()) +- inside an rcu_read_lock() section via rcu_dereference() + +3.3 Subsystem API +----------------- + +Each subsystem should: + +- add an entry in linux/cgroup_subsys.h +- define a cgroup_subsys object called _cgrp_subsys + +Each subsystem may export the following methods. The only mandatory +methods are css_alloc/free. Any others that are null are presumed to +be successful no-ops. + +``struct cgroup_subsys_state *css_alloc(struct cgroup *cgrp)`` +(cgroup_mutex held by caller) + +Called to allocate a subsystem state object for a cgroup. The +subsystem should allocate its subsystem state object for the passed +cgroup, returning a pointer to the new object on success or a +ERR_PTR() value. On success, the subsystem pointer should point to +a structure of type cgroup_subsys_state (typically embedded in a +larger subsystem-specific object), which will be initialized by the +cgroup system. Note that this will be called at initialization to +create the root subsystem state for this subsystem; this case can be +identified by the passed cgroup object having a NULL parent (since +it's the root of the hierarchy) and may be an appropriate place for +initialization code. + +``int css_online(struct cgroup *cgrp)`` +(cgroup_mutex held by caller) + +Called after @cgrp successfully completed all allocations and made +visible to cgroup_for_each_child/descendant_*() iterators. The +subsystem may choose to fail creation by returning -errno. This +callback can be used to implement reliable state sharing and +propagation along the hierarchy. See the comment on +cgroup_for_each_descendant_pre() for details. + +``void css_offline(struct cgroup *cgrp);`` +(cgroup_mutex held by caller) + +This is the counterpart of css_online() and called iff css_online() +has succeeded on @cgrp. This signifies the beginning of the end of +@cgrp. @cgrp is being removed and the subsystem should start dropping +all references it's holding on @cgrp. When all references are dropped, +cgroup removal will proceed to the next step - css_free(). After this +callback, @cgrp should be considered dead to the subsystem. + +``void css_free(struct cgroup *cgrp)`` +(cgroup_mutex held by caller) + +The cgroup system is about to free @cgrp; the subsystem should free +its subsystem state object. By the time this method is called, @cgrp +is completely unused; @cgrp->parent is still valid. (Note - can also +be called for a newly-created cgroup if an error occurs after this +subsystem's create() method has been called for the new cgroup). + +``int can_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)`` +(cgroup_mutex held by caller) + +Called prior to moving one or more tasks into a cgroup; if the +subsystem returns an error, this will abort the attach operation. +@tset contains the tasks to be attached and is guaranteed to have at +least one task in it. + +If there are multiple tasks in the taskset, then: + - it's guaranteed that all are from the same thread group + - @tset contains all tasks from the thread group whether or not + they're switching cgroups + - the first task is the leader + +Each @tset entry also contains the task's old cgroup and tasks which +aren't switching cgroup can be skipped easily using the +cgroup_taskset_for_each() iterator. Note that this isn't called on a +fork. If this method returns 0 (success) then this should remain valid +while the caller holds cgroup_mutex and it is ensured that either +attach() or cancel_attach() will be called in future. + +``void css_reset(struct cgroup_subsys_state *css)`` +(cgroup_mutex held by caller) + +An optional operation which should restore @css's configuration to the +initial state. This is currently only used on the unified hierarchy +when a subsystem is disabled on a cgroup through +"cgroup.subtree_control" but should remain enabled because other +subsystems depend on it. cgroup core makes such a css invisible by +removing the associated interface files and invokes this callback so +that the hidden subsystem can return to the initial neutral state. +This prevents unexpected resource control from a hidden css and +ensures that the configuration is in the initial state when it is made +visible again later. + +``void cancel_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)`` +(cgroup_mutex held by caller) + +Called when a task attach operation has failed after can_attach() has succeeded. +A subsystem whose can_attach() has some side-effects should provide this +function, so that the subsystem can implement a rollback. If not, not necessary. +This will be called only about subsystems whose can_attach() operation have +succeeded. The parameters are identical to can_attach(). + +``void attach(struct cgroup *cgrp, struct cgroup_taskset *tset)`` +(cgroup_mutex held by caller) + +Called after the task has been attached to the cgroup, to allow any +post-attachment activity that requires memory allocations or blocking. +The parameters are identical to can_attach(). + +``void fork(struct task_struct *task)`` + +Called when a task is forked into a cgroup. + +``void exit(struct task_struct *task)`` + +Called during task exit. + +``void free(struct task_struct *task)`` + +Called when the task_struct is freed. + +``void bind(struct cgroup *root)`` +(cgroup_mutex held by caller) + +Called when a cgroup subsystem is rebound to a different hierarchy +and root cgroup. Currently this will only involve movement between +the default hierarchy (which never has sub-cgroups) and a hierarchy +that is being created/destroyed (and hence has no sub-cgroups). + +4. Extended attribute usage +=========================== + +cgroup filesystem supports certain types of extended attributes in its +directories and files. The current supported types are: + + - Trusted (XATTR_TRUSTED) + - Security (XATTR_SECURITY) + +Both require CAP_SYS_ADMIN capability to set. + +Like in tmpfs, the extended attributes in cgroup filesystem are stored +using kernel memory and it's advised to keep the usage at minimum. This +is the reason why user defined extended attributes are not supported, since +any user can do it and there's no limit in the value size. + +The current known users for this feature are SELinux to limit cgroup usage +in containers and systemd for assorted meta data like main PID in a cgroup +(systemd creates a cgroup per service). + +5. Questions +============ + +:: + + Q: what's up with this '/bin/echo' ? + A: bash's builtin 'echo' command does not check calls to write() against + errors. If you use it in the cgroup file system, you won't be + able to tell whether a command succeeded or failed. + + Q: When I attach processes, only the first of the line gets really attached ! + A: We can only return one error code per call to write(). So you should also + put only ONE PID. diff --git a/Documentation/admin-guide/cgroup-v1/cpuacct.rst b/Documentation/admin-guide/cgroup-v1/cpuacct.rst new file mode 100644 index 000000000000..d30ed81d2ad7 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/cpuacct.rst @@ -0,0 +1,50 @@ +========================= +CPU Accounting Controller +========================= + +The CPU accounting controller is used to group tasks using cgroups and +account the CPU usage of these groups of tasks. + +The CPU accounting controller supports multi-hierarchy groups. An accounting +group accumulates the CPU usage of all of its child groups and the tasks +directly present in its group. + +Accounting groups can be created by first mounting the cgroup filesystem:: + + # mount -t cgroup -ocpuacct none /sys/fs/cgroup + +With the above step, the initial or the parent accounting group becomes +visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in +the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup. +/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained +by this group which is essentially the CPU time obtained by all the tasks +in the system. + +New accounting groups can be created under the parent group /sys/fs/cgroup:: + + # cd /sys/fs/cgroup + # mkdir g1 + # echo $$ > g1/tasks + +The above steps create a new group g1 and move the current shell +process (bash) into it. CPU time consumed by this bash and its children +can be obtained from g1/cpuacct.usage and the same is accumulated in +/sys/fs/cgroup/cpuacct.usage also. + +cpuacct.stat file lists a few statistics which further divide the +CPU time obtained by the cgroup into user and system times. Currently +the following statistics are supported: + +user: Time spent by tasks of the cgroup in user mode. +system: Time spent by tasks of the cgroup in kernel mode. + +user and system are in USER_HZ unit. + +cpuacct controller uses percpu_counter interface to collect user and +system times. This has two side effects: + +- It is theoretically possible to see wrong values for user and system times. + This is because percpu_counter_read() on 32bit systems isn't safe + against concurrent writes. +- It is possible to see slightly outdated values for user and system times + due to the batch processing nature of percpu_counter. diff --git a/Documentation/admin-guide/cgroup-v1/cpusets.rst b/Documentation/admin-guide/cgroup-v1/cpusets.rst new file mode 100644 index 000000000000..86a6ae995d54 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/cpusets.rst @@ -0,0 +1,866 @@ +======= +CPUSETS +======= + +Copyright (C) 2004 BULL SA. + +Written by Simon.Derr@bull.net + +- Portions Copyright (c) 2004-2006 Silicon Graphics, Inc. +- Modified by Paul Jackson +- Modified by Christoph Lameter +- Modified by Paul Menage +- Modified by Hidetoshi Seto + +.. CONTENTS: + + 1. Cpusets + 1.1 What are cpusets ? + 1.2 Why are cpusets needed ? + 1.3 How are cpusets implemented ? + 1.4 What are exclusive cpusets ? + 1.5 What is memory_pressure ? + 1.6 What is memory spread ? + 1.7 What is sched_load_balance ? + 1.8 What is sched_relax_domain_level ? + 1.9 How do I use cpusets ? + 2. Usage Examples and Syntax + 2.1 Basic Usage + 2.2 Adding/removing cpus + 2.3 Setting flags + 2.4 Attaching processes + 3. Questions + 4. Contact + +1. Cpusets +========== + +1.1 What are cpusets ? +---------------------- + +Cpusets provide a mechanism for assigning a set of CPUs and Memory +Nodes to a set of tasks. In this document "Memory Node" refers to +an on-line node that contains memory. + +Cpusets constrain the CPU and Memory placement of tasks to only +the resources within a task's current cpuset. They form a nested +hierarchy visible in a virtual file system. These are the essential +hooks, beyond what is already present, required to manage dynamic +job placement on large systems. + +Cpusets use the generic cgroup subsystem described in +Documentation/admin-guide/cgroup-v1/cgroups.rst. + +Requests by a task, using the sched_setaffinity(2) system call to +include CPUs in its CPU affinity mask, and using the mbind(2) and +set_mempolicy(2) system calls to include Memory Nodes in its memory +policy, are both filtered through that task's cpuset, filtering out any +CPUs or Memory Nodes not in that cpuset. The scheduler will not +schedule a task on a CPU that is not allowed in its cpus_allowed +vector, and the kernel page allocator will not allocate a page on a +node that is not allowed in the requesting task's mems_allowed vector. + +User level code may create and destroy cpusets by name in the cgroup +virtual file system, manage the attributes and permissions of these +cpusets and which CPUs and Memory Nodes are assigned to each cpuset, +specify and query to which cpuset a task is assigned, and list the +task pids assigned to a cpuset. + + +1.2 Why are cpusets needed ? +---------------------------- + +The management of large computer systems, with many processors (CPUs), +complex memory cache hierarchies and multiple Memory Nodes having +non-uniform access times (NUMA) presents additional challenges for +the efficient scheduling and memory placement of processes. + +Frequently more modest sized systems can be operated with adequate +efficiency just by letting the operating system automatically share +the available CPU and Memory resources amongst the requesting tasks. + +But larger systems, which benefit more from careful processor and +memory placement to reduce memory access times and contention, +and which typically represent a larger investment for the customer, +can benefit from explicitly placing jobs on properly sized subsets of +the system. + +This can be especially valuable on: + + * Web Servers running multiple instances of the same web application, + * Servers running different applications (for instance, a web server + and a database), or + * NUMA systems running large HPC applications with demanding + performance characteristics. + +These subsets, or "soft partitions" must be able to be dynamically +adjusted, as the job mix changes, without impacting other concurrently +executing jobs. The location of the running jobs pages may also be moved +when the memory locations are changed. + +The kernel cpuset patch provides the minimum essential kernel +mechanisms required to efficiently implement such subsets. It +leverages existing CPU and Memory Placement facilities in the Linux +kernel to avoid any additional impact on the critical scheduler or +memory allocator code. + + +1.3 How are cpusets implemented ? +--------------------------------- + +Cpusets provide a Linux kernel mechanism to constrain which CPUs and +Memory Nodes are used by a process or set of processes. + +The Linux kernel already has a pair of mechanisms to specify on which +CPUs a task may be scheduled (sched_setaffinity) and on which Memory +Nodes it may obtain memory (mbind, set_mempolicy). + +Cpusets extends these two mechanisms as follows: + + - Cpusets are sets of allowed CPUs and Memory Nodes, known to the + kernel. + - Each task in the system is attached to a cpuset, via a pointer + in the task structure to a reference counted cgroup structure. + - Calls to sched_setaffinity are filtered to just those CPUs + allowed in that task's cpuset. + - Calls to mbind and set_mempolicy are filtered to just + those Memory Nodes allowed in that task's cpuset. + - The root cpuset contains all the systems CPUs and Memory + Nodes. + - For any cpuset, one can define child cpusets containing a subset + of the parents CPU and Memory Node resources. + - The hierarchy of cpusets can be mounted at /dev/cpuset, for + browsing and manipulation from user space. + - A cpuset may be marked exclusive, which ensures that no other + cpuset (except direct ancestors and descendants) may contain + any overlapping CPUs or Memory Nodes. + - You can list all the tasks (by pid) attached to any cpuset. + +The implementation of cpusets requires a few, simple hooks +into the rest of the kernel, none in performance critical paths: + + - in init/main.c, to initialize the root cpuset at system boot. + - in fork and exit, to attach and detach a task from its cpuset. + - in sched_setaffinity, to mask the requested CPUs by what's + allowed in that task's cpuset. + - in sched.c migrate_live_tasks(), to keep migrating tasks within + the CPUs allowed by their cpuset, if possible. + - in the mbind and set_mempolicy system calls, to mask the requested + Memory Nodes by what's allowed in that task's cpuset. + - in page_alloc.c, to restrict memory to allowed nodes. + - in vmscan.c, to restrict page recovery to the current cpuset. + +You should mount the "cgroup" filesystem type in order to enable +browsing and modifying the cpusets presently known to the kernel. No +new system calls are added for cpusets - all support for querying and +modifying cpusets is via this cpuset file system. + +The /proc//status file for each task has four added lines, +displaying the task's cpus_allowed (on which CPUs it may be scheduled) +and mems_allowed (on which Memory Nodes it may obtain memory), +in the two formats seen in the following example:: + + Cpus_allowed: ffffffff,ffffffff,ffffffff,ffffffff + Cpus_allowed_list: 0-127 + Mems_allowed: ffffffff,ffffffff + Mems_allowed_list: 0-63 + +Each cpuset is represented by a directory in the cgroup file system +containing (on top of the standard cgroup files) the following +files describing that cpuset: + + - cpuset.cpus: list of CPUs in that cpuset + - cpuset.mems: list of Memory Nodes in that cpuset + - cpuset.memory_migrate flag: if set, move pages to cpusets nodes + - cpuset.cpu_exclusive flag: is cpu placement exclusive? + - cpuset.mem_exclusive flag: is memory placement exclusive? + - cpuset.mem_hardwall flag: is memory allocation hardwalled + - cpuset.memory_pressure: measure of how much paging pressure in cpuset + - cpuset.memory_spread_page flag: if set, spread page cache evenly on allowed nodes + - cpuset.memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes + - cpuset.sched_load_balance flag: if set, load balance within CPUs on that cpuset + - cpuset.sched_relax_domain_level: the searching range when migrating tasks + +In addition, only the root cpuset has the following file: + + - cpuset.memory_pressure_enabled flag: compute memory_pressure? + +New cpusets are created using the mkdir system call or shell +command. The properties of a cpuset, such as its flags, allowed +CPUs and Memory Nodes, and attached tasks, are modified by writing +to the appropriate file in that cpusets directory, as listed above. + +The named hierarchical structure of nested cpusets allows partitioning +a large system into nested, dynamically changeable, "soft-partitions". + +The attachment of each task, automatically inherited at fork by any +children of that task, to a cpuset allows organizing the work load +on a system into related sets of tasks such that each set is constrained +to using the CPUs and Memory Nodes of a particular cpuset. A task +may be re-attached to any other cpuset, if allowed by the permissions +on the necessary cpuset file system directories. + +Such management of a system "in the large" integrates smoothly with +the detailed placement done on individual tasks and memory regions +using the sched_setaffinity, mbind and set_mempolicy system calls. + +The following rules apply to each cpuset: + + - Its CPUs and Memory Nodes must be a subset of its parents. + - It can't be marked exclusive unless its parent is. + - If its cpu or memory is exclusive, they may not overlap any sibling. + +These rules, and the natural hierarchy of cpusets, enable efficient +enforcement of the exclusive guarantee, without having to scan all +cpusets every time any of them change to ensure nothing overlaps a +exclusive cpuset. Also, the use of a Linux virtual file system (vfs) +to represent the cpuset hierarchy provides for a familiar permission +and name space for cpusets, with a minimum of additional kernel code. + +The cpus and mems files in the root (top_cpuset) cpuset are +read-only. The cpus file automatically tracks the value of +cpu_online_mask using a CPU hotplug notifier, and the mems file +automatically tracks the value of node_states[N_MEMORY]--i.e., +nodes with memory--using the cpuset_track_online_nodes() hook. + + +1.4 What are exclusive cpusets ? +-------------------------------- + +If a cpuset is cpu or mem exclusive, no other cpuset, other than +a direct ancestor or descendant, may share any of the same CPUs or +Memory Nodes. + +A cpuset that is cpuset.mem_exclusive *or* cpuset.mem_hardwall is "hardwalled", +i.e. it restricts kernel allocations for page, buffer and other data +commonly shared by the kernel across multiple users. All cpusets, +whether hardwalled or not, restrict allocations of memory for user +space. This enables configuring a system so that several independent +jobs can share common kernel data, such as file system pages, while +isolating each job's user allocation in its own cpuset. To do this, +construct a large mem_exclusive cpuset to hold all the jobs, and +construct child, non-mem_exclusive cpusets for each individual job. +Only a small amount of typical kernel memory, such as requests from +interrupt handlers, is allowed to be taken outside even a +mem_exclusive cpuset. + + +1.5 What is memory_pressure ? +----------------------------- +The memory_pressure of a cpuset provides a simple per-cpuset metric +of the rate that the tasks in a cpuset are attempting to free up in +use memory on the nodes of the cpuset to satisfy additional memory +requests. + +This enables batch managers monitoring jobs running in dedicated +cpusets to efficiently detect what level of memory pressure that job +is causing. + +This is useful both on tightly managed systems running a wide mix of +submitted jobs, which may choose to terminate or re-prioritize jobs that +are trying to use more memory than allowed on the nodes assigned to them, +and with tightly coupled, long running, massively parallel scientific +computing jobs that will dramatically fail to meet required performance +goals if they start to use more memory than allowed to them. + +This mechanism provides a very economical way for the batch manager +to monitor a cpuset for signs of memory pressure. It's up to the +batch manager or other user code to decide what to do about it and +take action. + +==> + Unless this feature is enabled by writing "1" to the special file + /dev/cpuset/memory_pressure_enabled, the hook in the rebalance + code of __alloc_pages() for this metric reduces to simply noticing + that the cpuset_memory_pressure_enabled flag is zero. So only + systems that enable this feature will compute the metric. + +Why a per-cpuset, running average: + + Because this meter is per-cpuset, rather than per-task or mm, + the system load imposed by a batch scheduler monitoring this + metric is sharply reduced on large systems, because a scan of + the tasklist can be avoided on each set of queries. + + Because this meter is a running average, instead of an accumulating + counter, a batch scheduler can detect memory pressure with a + single read, instead of having to read and accumulate results + for a period of time. + + Because this meter is per-cpuset rather than per-task or mm, + the batch scheduler can obtain the key information, memory + pressure in a cpuset, with a single read, rather than having to + query and accumulate results over all the (dynamically changing) + set of tasks in the cpuset. + +A per-cpuset simple digital filter (requires a spinlock and 3 words +of data per-cpuset) is kept, and updated by any task attached to that +cpuset, if it enters the synchronous (direct) page reclaim code. + +A per-cpuset file provides an integer number representing the recent +(half-life of 10 seconds) rate of direct page reclaims caused by +the tasks in the cpuset, in units of reclaims attempted per second, +times 1000. + + +1.6 What is memory spread ? +--------------------------- +There are two boolean flag files per cpuset that control where the +kernel allocates pages for the file system buffers and related in +kernel data structures. They are called 'cpuset.memory_spread_page' and +'cpuset.memory_spread_slab'. + +If the per-cpuset boolean flag file 'cpuset.memory_spread_page' is set, then +the kernel will spread the file system buffers (page cache) evenly +over all the nodes that the faulting task is allowed to use, instead +of preferring to put those pages on the node where the task is running. + +If the per-cpuset boolean flag file 'cpuset.memory_spread_slab' is set, +then the kernel will spread some file system related slab caches, +such as for inodes and dentries evenly over all the nodes that the +faulting task is allowed to use, instead of preferring to put those +pages on the node where the task is running. + +The setting of these flags does not affect anonymous data segment or +stack segment pages of a task. + +By default, both kinds of memory spreading are off, and memory +pages are allocated on the node local to where the task is running, +except perhaps as modified by the task's NUMA mempolicy or cpuset +configuration, so long as sufficient free memory pages are available. + +When new cpusets are created, they inherit the memory spread settings +of their parent. + +Setting memory spreading causes allocations for the affected page +or slab caches to ignore the task's NUMA mempolicy and be spread +instead. Tasks using mbind() or set_mempolicy() calls to set NUMA +mempolicies will not notice any change in these calls as a result of +their containing task's memory spread settings. If memory spreading +is turned off, then the currently specified NUMA mempolicy once again +applies to memory page allocations. + +Both 'cpuset.memory_spread_page' and 'cpuset.memory_spread_slab' are boolean flag +files. By default they contain "0", meaning that the feature is off +for that cpuset. If a "1" is written to that file, then that turns +the named feature on. + +The implementation is simple. + +Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag +PFA_SPREAD_PAGE for each task that is in that cpuset or subsequently +joins that cpuset. The page allocation calls for the page cache +is modified to perform an inline check for this PFA_SPREAD_PAGE task +flag, and if set, a call to a new routine cpuset_mem_spread_node() +returns the node to prefer for the allocation. + +Similarly, setting 'cpuset.memory_spread_slab' turns on the flag +PFA_SPREAD_SLAB, and appropriately marked slab caches will allocate +pages from the node returned by cpuset_mem_spread_node(). + +The cpuset_mem_spread_node() routine is also simple. It uses the +value of a per-task rotor cpuset_mem_spread_rotor to select the next +node in the current task's mems_allowed to prefer for the allocation. + +This memory placement policy is also known (in other contexts) as +round-robin or interleave. + +This policy can provide substantial improvements for jobs that need +to place thread local data on the corresponding node, but that need +to access large file system data sets that need to be spread across +the several nodes in the jobs cpuset in order to fit. Without this +policy, especially for jobs that might have one thread reading in the +data set, the memory allocation across the nodes in the jobs cpuset +can become very uneven. + +1.7 What is sched_load_balance ? +-------------------------------- + +The kernel scheduler (kernel/sched/core.c) automatically load balances +tasks. If one CPU is underutilized, kernel code running on that +CPU will look for tasks on other more overloaded CPUs and move those +tasks to itself, within the constraints of such placement mechanisms +as cpusets and sched_setaffinity. + +The algorithmic cost of load balancing and its impact on key shared +kernel data structures such as the task list increases more than +linearly with the number of CPUs being balanced. So the scheduler +has support to partition the systems CPUs into a number of sched +domains such that it only load balances within each sched domain. +Each sched domain covers some subset of the CPUs in the system; +no two sched domains overlap; some CPUs might not be in any sched +domain and hence won't be load balanced. + +Put simply, it costs less to balance between two smaller sched domains +than one big one, but doing so means that overloads in one of the +two domains won't be load balanced to the other one. + +By default, there is one sched domain covering all CPUs, including those +marked isolated using the kernel boot time "isolcpus=" argument. However, +the isolated CPUs will not participate in load balancing, and will not +have tasks running on them unless explicitly assigned. + +This default load balancing across all CPUs is not well suited for +the following two situations: + + 1) On large systems, load balancing across many CPUs is expensive. + If the system is managed using cpusets to place independent jobs + on separate sets of CPUs, full load balancing is unnecessary. + 2) Systems supporting realtime on some CPUs need to minimize + system overhead on those CPUs, including avoiding task load + balancing if that is not needed. + +When the per-cpuset flag "cpuset.sched_load_balance" is enabled (the default +setting), it requests that all the CPUs in that cpusets allowed 'cpuset.cpus' +be contained in a single sched domain, ensuring that load balancing +can move a task (not otherwised pinned, as by sched_setaffinity) +from any CPU in that cpuset to any other. + +When the per-cpuset flag "cpuset.sched_load_balance" is disabled, then the +scheduler will avoid load balancing across the CPUs in that cpuset, +--except-- in so far as is necessary because some overlapping cpuset +has "sched_load_balance" enabled. + +So, for example, if the top cpuset has the flag "cpuset.sched_load_balance" +enabled, then the scheduler will have one sched domain covering all +CPUs, and the setting of the "cpuset.sched_load_balance" flag in any other +cpusets won't matter, as we're already fully load balancing. + +Therefore in the above two situations, the top cpuset flag +"cpuset.sched_load_balance" should be disabled, and only some of the smaller, +child cpusets have this flag enabled. + +When doing this, you don't usually want to leave any unpinned tasks in +the top cpuset that might use non-trivial amounts of CPU, as such tasks +may be artificially constrained to some subset of CPUs, depending on +the particulars of this flag setting in descendant cpusets. Even if +such a task could use spare CPU cycles in some other CPUs, the kernel +scheduler might not consider the possibility of load balancing that +task to that underused CPU. + +Of course, tasks pinned to a particular CPU can be left in a cpuset +that disables "cpuset.sched_load_balance" as those tasks aren't going anywhere +else anyway. + +There is an impedance mismatch here, between cpusets and sched domains. +Cpusets are hierarchical and nest. Sched domains are flat; they don't +overlap and each CPU is in at most one sched domain. + +It is necessary for sched domains to be flat because load balancing +across partially overlapping sets of CPUs would risk unstable dynamics +that would be beyond our understanding. So if each of two partially +overlapping cpusets enables the flag 'cpuset.sched_load_balance', then we +form a single sched domain that is a superset of both. We won't move +a task to a CPU outside its cpuset, but the scheduler load balancing +code might waste some compute cycles considering that possibility. + +This mismatch is why there is not a simple one-to-one relation +between which cpusets have the flag "cpuset.sched_load_balance" enabled, +and the sched domain configuration. If a cpuset enables the flag, it +will get balancing across all its CPUs, but if it disables the flag, +it will only be assured of no load balancing if no other overlapping +cpuset enables the flag. + +If two cpusets have partially overlapping 'cpuset.cpus' allowed, and only +one of them has this flag enabled, then the other may find its +tasks only partially load balanced, just on the overlapping CPUs. +This is just the general case of the top_cpuset example given a few +paragraphs above. In the general case, as in the top cpuset case, +don't leave tasks that might use non-trivial amounts of CPU in +such partially load balanced cpusets, as they may be artificially +constrained to some subset of the CPUs allowed to them, for lack of +load balancing to the other CPUs. + +CPUs in "cpuset.isolcpus" were excluded from load balancing by the +isolcpus= kernel boot option, and will never be load balanced regardless +of the value of "cpuset.sched_load_balance" in any cpuset. + +1.7.1 sched_load_balance implementation details. +------------------------------------------------ + +The per-cpuset flag 'cpuset.sched_load_balance' defaults to enabled (contrary +to most cpuset flags.) When enabled for a cpuset, the kernel will +ensure that it can load balance across all the CPUs in that cpuset +(makes sure that all the CPUs in the cpus_allowed of that cpuset are +in the same sched domain.) + +If two overlapping cpusets both have 'cpuset.sched_load_balance' enabled, +then they will be (must be) both in the same sched domain. + +If, as is the default, the top cpuset has 'cpuset.sched_load_balance' enabled, +then by the above that means there is a single sched domain covering +the whole system, regardless of any other cpuset settings. + +The kernel commits to user space that it will avoid load balancing +where it can. It will pick as fine a granularity partition of sched +domains as it can while still providing load balancing for any set +of CPUs allowed to a cpuset having 'cpuset.sched_load_balance' enabled. + +The internal kernel cpuset to scheduler interface passes from the +cpuset code to the scheduler code a partition of the load balanced +CPUs in the system. This partition is a set of subsets (represented +as an array of struct cpumask) of CPUs, pairwise disjoint, that cover +all the CPUs that must be load balanced. + +The cpuset code builds a new such partition and passes it to the +scheduler sched domain setup code, to have the sched domains rebuilt +as necessary, whenever: + + - the 'cpuset.sched_load_balance' flag of a cpuset with non-empty CPUs changes, + - or CPUs come or go from a cpuset with this flag enabled, + - or 'cpuset.sched_relax_domain_level' value of a cpuset with non-empty CPUs + and with this flag enabled changes, + - or a cpuset with non-empty CPUs and with this flag enabled is removed, + - or a cpu is offlined/onlined. + +This partition exactly defines what sched domains the scheduler should +setup - one sched domain for each element (struct cpumask) in the +partition. + +The scheduler remembers the currently active sched domain partitions. +When the scheduler routine partition_sched_domains() is invoked from +the cpuset code to update these sched domains, it compares the new +partition requested with the current, and updates its sched domains, +removing the old and adding the new, for each change. + + +1.8 What is sched_relax_domain_level ? +-------------------------------------- + +In sched domain, the scheduler migrates tasks in 2 ways; periodic load +balance on tick, and at time of some schedule events. + +When a task is woken up, scheduler try to move the task on idle CPU. +For example, if a task A running on CPU X activates another task B +on the same CPU X, and if CPU Y is X's sibling and performing idle, +then scheduler migrate task B to CPU Y so that task B can start on +CPU Y without waiting task A on CPU X. + +And if a CPU run out of tasks in its runqueue, the CPU try to pull +extra tasks from other busy CPUs to help them before it is going to +be idle. + +Of course it takes some searching cost to find movable tasks and/or +idle CPUs, the scheduler might not search all CPUs in the domain +every time. In fact, in some architectures, the searching ranges on +events are limited in the same socket or node where the CPU locates, +while the load balance on tick searches all. + +For example, assume CPU Z is relatively far from CPU X. Even if CPU Z +is idle while CPU X and the siblings are busy, scheduler can't migrate +woken task B from X to Z since it is out of its searching range. +As the result, task B on CPU X need to wait task A or wait load balance +on the next tick. For some applications in special situation, waiting +1 tick may be too long. + +The 'cpuset.sched_relax_domain_level' file allows you to request changing +this searching range as you like. This file takes int value which +indicates size of searching range in levels ideally as follows, +otherwise initial value -1 that indicates the cpuset has no request. + +====== =========================================================== + -1 no request. use system default or follow request of others. + 0 no search. + 1 search siblings (hyperthreads in a core). + 2 search cores in a package. + 3 search cpus in a node [= system wide on non-NUMA system] + 4 search nodes in a chunk of node [on NUMA system] + 5 search system wide [on NUMA system] +====== =========================================================== + +The system default is architecture dependent. The system default +can be changed using the relax_domain_level= boot parameter. + +This file is per-cpuset and affect the sched domain where the cpuset +belongs to. Therefore if the flag 'cpuset.sched_load_balance' of a cpuset +is disabled, then 'cpuset.sched_relax_domain_level' have no effect since +there is no sched domain belonging the cpuset. + +If multiple cpusets are overlapping and hence they form a single sched +domain, the largest value among those is used. Be careful, if one +requests 0 and others are -1 then 0 is used. + +Note that modifying this file will have both good and bad effects, +and whether it is acceptable or not depends on your situation. +Don't modify this file if you are not sure. + +If your situation is: + + - The migration costs between each cpu can be assumed considerably + small(for you) due to your special application's behavior or + special hardware support for CPU cache etc. + - The searching cost doesn't have impact(for you) or you can make + the searching cost enough small by managing cpuset to compact etc. + - The latency is required even it sacrifices cache hit rate etc. + then increasing 'sched_relax_domain_level' would benefit you. + + +1.9 How do I use cpusets ? +-------------------------- + +In order to minimize the impact of cpusets on critical kernel +code, such as the scheduler, and due to the fact that the kernel +does not support one task updating the memory placement of another +task directly, the impact on a task of changing its cpuset CPU +or Memory Node placement, or of changing to which cpuset a task +is attached, is subtle. + +If a cpuset has its Memory Nodes modified, then for each task attached +to that cpuset, the next time that the kernel attempts to allocate +a page of memory for that task, the kernel will notice the change +in the task's cpuset, and update its per-task memory placement to +remain within the new cpusets memory placement. If the task was using +mempolicy MPOL_BIND, and the nodes to which it was bound overlap with +its new cpuset, then the task will continue to use whatever subset +of MPOL_BIND nodes are still allowed in the new cpuset. If the task +was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed +in the new cpuset, then the task will be essentially treated as if it +was MPOL_BIND bound to the new cpuset (even though its NUMA placement, +as queried by get_mempolicy(), doesn't change). If a task is moved +from one cpuset to another, then the kernel will adjust the task's +memory placement, as above, the next time that the kernel attempts +to allocate a page of memory for that task. + +If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset +will have its allowed CPU placement changed immediately. Similarly, +if a task's pid is written to another cpuset's 'tasks' file, then its +allowed CPU placement is changed immediately. If such a task had been +bound to some subset of its cpuset using the sched_setaffinity() call, +the task will be allowed to run on any CPU allowed in its new cpuset, +negating the effect of the prior sched_setaffinity() call. + +In summary, the memory placement of a task whose cpuset is changed is +updated by the kernel, on the next allocation of a page for that task, +and the processor placement is updated immediately. + +Normally, once a page is allocated (given a physical page +of main memory) then that page stays on whatever node it +was allocated, so long as it remains allocated, even if the +cpusets memory placement policy 'cpuset.mems' subsequently changes. +If the cpuset flag file 'cpuset.memory_migrate' is set true, then when +tasks are attached to that cpuset, any pages that task had +allocated to it on nodes in its previous cpuset are migrated +to the task's new cpuset. The relative placement of the page within +the cpuset is preserved during these migration operations if possible. +For example if the page was on the second valid node of the prior cpuset +then the page will be placed on the second valid node of the new cpuset. + +Also if 'cpuset.memory_migrate' is set true, then if that cpuset's +'cpuset.mems' file is modified, pages allocated to tasks in that +cpuset, that were on nodes in the previous setting of 'cpuset.mems', +will be moved to nodes in the new setting of 'mems.' +Pages that were not in the task's prior cpuset, or in the cpuset's +prior 'cpuset.mems' setting, will not be moved. + +There is an exception to the above. If hotplug functionality is used +to remove all the CPUs that are currently assigned to a cpuset, +then all the tasks in that cpuset will be moved to the nearest ancestor +with non-empty cpus. But the moving of some (or all) tasks might fail if +cpuset is bound with another cgroup subsystem which has some restrictions +on task attaching. In this failing case, those tasks will stay +in the original cpuset, and the kernel will automatically update +their cpus_allowed to allow all online CPUs. When memory hotplug +functionality for removing Memory Nodes is available, a similar exception +is expected to apply there as well. In general, the kernel prefers to +violate cpuset placement, over starving a task that has had all +its allowed CPUs or Memory Nodes taken offline. + +There is a second exception to the above. GFP_ATOMIC requests are +kernel internal allocations that must be satisfied, immediately. +The kernel may drop some request, in rare cases even panic, if a +GFP_ATOMIC alloc fails. If the request cannot be satisfied within +the current task's cpuset, then we relax the cpuset, and look for +memory anywhere we can find it. It's better to violate the cpuset +than stress the kernel. + +To start a new job that is to be contained within a cpuset, the steps are: + + 1) mkdir /sys/fs/cgroup/cpuset + 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset + 3) Create the new cpuset by doing mkdir's and write's (or echo's) in + the /sys/fs/cgroup/cpuset virtual file system. + 4) Start a task that will be the "founding father" of the new job. + 5) Attach that task to the new cpuset by writing its pid to the + /sys/fs/cgroup/cpuset tasks file for that cpuset. + 6) fork, exec or clone the job tasks from this founding father task. + +For example, the following sequence of commands will setup a cpuset +named "Charlie", containing just CPUs 2 and 3, and Memory Node 1, +and then start a subshell 'sh' in that cpuset:: + + mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset + cd /sys/fs/cgroup/cpuset + mkdir Charlie + cd Charlie + /bin/echo 2-3 > cpuset.cpus + /bin/echo 1 > cpuset.mems + /bin/echo $$ > tasks + sh + # The subshell 'sh' is now running in cpuset Charlie + # The next line should display '/Charlie' + cat /proc/self/cpuset + +There are ways to query or modify cpusets: + + - via the cpuset file system directly, using the various cd, mkdir, echo, + cat, rmdir commands from the shell, or their equivalent from C. + - via the C library libcpuset. + - via the C library libcgroup. + (http://sourceforge.net/projects/libcg/) + - via the python application cset. + (http://code.google.com/p/cpuset/) + +The sched_setaffinity calls can also be done at the shell prompt using +SGI's runon or Robert Love's taskset. The mbind and set_mempolicy +calls can be done at the shell prompt using the numactl command +(part of Andi Kleen's numa package). + +2. Usage Examples and Syntax +============================ + +2.1 Basic Usage +--------------- + +Creating, modifying, using the cpusets can be done through the cpuset +virtual filesystem. + +To mount it, type: +# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset + +Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the +tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset +is the cpuset that holds the whole system. + +If you want to create a new cpuset under /sys/fs/cgroup/cpuset:: + + # cd /sys/fs/cgroup/cpuset + # mkdir my_cpuset + +Now you want to do something with this cpuset:: + + # cd my_cpuset + +In this directory you can find several files:: + + # ls + cgroup.clone_children cpuset.memory_pressure + cgroup.event_control cpuset.memory_spread_page + cgroup.procs cpuset.memory_spread_slab + cpuset.cpu_exclusive cpuset.mems + cpuset.cpus cpuset.sched_load_balance + cpuset.mem_exclusive cpuset.sched_relax_domain_level + cpuset.mem_hardwall notify_on_release + cpuset.memory_migrate tasks + +Reading them will give you information about the state of this cpuset: +the CPUs and Memory Nodes it can use, the processes that are using +it, its properties. By writing to these files you can manipulate +the cpuset. + +Set some flags:: + + # /bin/echo 1 > cpuset.cpu_exclusive + +Add some cpus:: + + # /bin/echo 0-7 > cpuset.cpus + +Add some mems:: + + # /bin/echo 0-7 > cpuset.mems + +Now attach your shell to this cpuset:: + + # /bin/echo $$ > tasks + +You can also create cpusets inside your cpuset by using mkdir in this +directory:: + + # mkdir my_sub_cs + +To remove a cpuset, just use rmdir:: + + # rmdir my_sub_cs + +This will fail if the cpuset is in use (has cpusets inside, or has +processes attached). + +Note that for legacy reasons, the "cpuset" filesystem exists as a +wrapper around the cgroup filesystem. + +The command:: + + mount -t cpuset X /sys/fs/cgroup/cpuset + +is equivalent to:: + + mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset + echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent + +2.2 Adding/removing cpus +------------------------ + +This is the syntax to use when writing in the cpus or mems files +in cpuset directories:: + + # /bin/echo 1-4 > cpuset.cpus -> set cpus list to cpus 1,2,3,4 + # /bin/echo 1,2,3,4 > cpuset.cpus -> set cpus list to cpus 1,2,3,4 + +To add a CPU to a cpuset, write the new list of CPUs including the +CPU to be added. To add 6 to the above cpuset:: + + # /bin/echo 1-4,6 > cpuset.cpus -> set cpus list to cpus 1,2,3,4,6 + +Similarly to remove a CPU from a cpuset, write the new list of CPUs +without the CPU to be removed. + +To remove all the CPUs:: + + # /bin/echo "" > cpuset.cpus -> clear cpus list + +2.3 Setting flags +----------------- + +The syntax is very simple:: + + # /bin/echo 1 > cpuset.cpu_exclusive -> set flag 'cpuset.cpu_exclusive' + # /bin/echo 0 > cpuset.cpu_exclusive -> unset flag 'cpuset.cpu_exclusive' + +2.4 Attaching processes +----------------------- + +:: + + # /bin/echo PID > tasks + +Note that it is PID, not PIDs. You can only attach ONE task at a time. +If you have several tasks to attach, you have to do it one after another:: + + # /bin/echo PID1 > tasks + # /bin/echo PID2 > tasks + ... + # /bin/echo PIDn > tasks + + +3. Questions +============ + +Q: + what's up with this '/bin/echo' ? + +A: + bash's builtin 'echo' command does not check calls to write() against + errors. If you use it in the cpuset file system, you won't be + able to tell whether a command succeeded or failed. + +Q: + When I attach processes, only the first of the line gets really attached ! + +A: + We can only return one error code per call to write(). So you should also + put only ONE pid. + +4. Contact +========== + +Web: http://www.bullopensource.org/cpuset diff --git a/Documentation/admin-guide/cgroup-v1/devices.rst b/Documentation/admin-guide/cgroup-v1/devices.rst new file mode 100644 index 000000000000..e1886783961e --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/devices.rst @@ -0,0 +1,132 @@ +=========================== +Device Whitelist Controller +=========================== + +1. Description +============== + +Implement a cgroup to track and enforce open and mknod restrictions +on device files. A device cgroup associates a device access +whitelist with each cgroup. A whitelist entry has 4 fields. +'type' is a (all), c (char), or b (block). 'all' means it applies +to all types and all major and minor numbers. Major and minor are +either an integer or * for all. Access is a composition of r +(read), w (write), and m (mknod). + +The root device cgroup starts with rwm to 'all'. A child device +cgroup gets a copy of the parent. Administrators can then remove +devices from the whitelist or add new entries. A child cgroup can +never receive a device access which is denied by its parent. + +2. User Interface +================= + +An entry is added using devices.allow, and removed using +devices.deny. For instance:: + + echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow + +allows cgroup 1 to read and mknod the device usually known as +/dev/null. Doing:: + + echo a > /sys/fs/cgroup/1/devices.deny + +will remove the default 'a *:* rwm' entry. Doing:: + + echo a > /sys/fs/cgroup/1/devices.allow + +will add the 'a *:* rwm' entry to the whitelist. + +3. Security +=========== + +Any task can move itself between cgroups. This clearly won't +suffice, but we can decide the best way to adequately restrict +movement as people get some experience with this. We may just want +to require CAP_SYS_ADMIN, which at least is a separate bit from +CAP_MKNOD. We may want to just refuse moving to a cgroup which +isn't a descendant of the current one. Or we may want to use +CAP_MAC_ADMIN, since we really are trying to lock down root. + +CAP_SYS_ADMIN is needed to modify the whitelist or move another +task to a new cgroup. (Again we'll probably want to change that). + +A cgroup may not be granted more permissions than the cgroup's +parent has. + +4. Hierarchy +============ + +device cgroups maintain hierarchy by making sure a cgroup never has more +access permissions than its parent. Every time an entry is written to +a cgroup's devices.deny file, all its children will have that entry removed +from their whitelist and all the locally set whitelist entries will be +re-evaluated. In case one of the locally set whitelist entries would provide +more access than the cgroup's parent, it'll be removed from the whitelist. + +Example:: + + A + / \ + B + + group behavior exceptions + A allow "b 8:* rwm", "c 116:1 rw" + B deny "c 1:3 rwm", "c 116:2 rwm", "b 3:* rwm" + +If a device is denied in group A:: + + # echo "c 116:* r" > A/devices.deny + +it'll propagate down and after revalidating B's entries, the whitelist entry +"c 116:2 rwm" will be removed:: + + group whitelist entries denied devices + A all "b 8:* rwm", "c 116:* rw" + B "c 1:3 rwm", "b 3:* rwm" all the rest + +In case parent's exceptions change and local exceptions are not allowed +anymore, they'll be deleted. + +Notice that new whitelist entries will not be propagated:: + + A + / \ + B + + group whitelist entries denied devices + A "c 1:3 rwm", "c 1:5 r" all the rest + B "c 1:3 rwm", "c 1:5 r" all the rest + +when adding ``c *:3 rwm``:: + + # echo "c *:3 rwm" >A/devices.allow + +the result:: + + group whitelist entries denied devices + A "c *:3 rwm", "c 1:5 r" all the rest + B "c 1:3 rwm", "c 1:5 r" all the rest + +but now it'll be possible to add new entries to B:: + + # echo "c 2:3 rwm" >B/devices.allow + # echo "c 50:3 r" >B/devices.allow + +or even:: + + # echo "c *:3 rwm" >B/devices.allow + +Allowing or denying all by writing 'a' to devices.allow or devices.deny will +not be possible once the device cgroups has children. + +4.1 Hierarchy (internal implementation) +--------------------------------------- + +device cgroups is implemented internally using a behavior (ALLOW, DENY) and a +list of exceptions. The internal state is controlled using the same user +interface to preserve compatibility with the previous whitelist-only +implementation. Removal or addition of exceptions that will reduce the access +to devices will be propagated down the hierarchy. +For every propagated exception, the effective rules will be re-evaluated based +on current parent's access rules. diff --git a/Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst b/Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst new file mode 100644 index 000000000000..582d3427de3f --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst @@ -0,0 +1,127 @@ +============== +Cgroup Freezer +============== + +The cgroup freezer is useful to batch job management system which start +and stop sets of tasks in order to schedule the resources of a machine +according to the desires of a system administrator. This sort of program +is often used on HPC clusters to schedule access to the cluster as a +whole. The cgroup freezer uses cgroups to describe the set of tasks to +be started/stopped by the batch job management system. It also provides +a means to start and stop the tasks composing the job. + +The cgroup freezer will also be useful for checkpointing running groups +of tasks. The freezer allows the checkpoint code to obtain a consistent +image of the tasks by attempting to force the tasks in a cgroup into a +quiescent state. Once the tasks are quiescent another task can +walk /proc or invoke a kernel interface to gather information about the +quiesced tasks. Checkpointed tasks can be restarted later should a +recoverable error occur. This also allows the checkpointed tasks to be +migrated between nodes in a cluster by copying the gathered information +to another node and restarting the tasks there. + +Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping +and resuming tasks in userspace. Both of these signals are observable +from within the tasks we wish to freeze. While SIGSTOP cannot be caught, +blocked, or ignored it can be seen by waiting or ptracing parent tasks. +SIGCONT is especially unsuitable since it can be caught by the task. Any +programs designed to watch for SIGSTOP and SIGCONT could be broken by +attempting to use SIGSTOP and SIGCONT to stop and resume tasks. We can +demonstrate this problem using nested bash shells:: + + $ echo $$ + 16644 + $ bash + $ echo $$ + 16690 + + From a second, unrelated bash shell: + $ kill -SIGSTOP 16690 + $ kill -SIGCONT 16690 + + + +This happens because bash can observe both signals and choose how it +responds to them. + +Another example of a program which catches and responds to these +signals is gdb. In fact any program designed to use ptrace is likely to +have a problem with this method of stopping and resuming tasks. + +In contrast, the cgroup freezer uses the kernel freezer code to +prevent the freeze/unfreeze cycle from becoming visible to the tasks +being frozen. This allows the bash example above and gdb to run as +expected. + +The cgroup freezer is hierarchical. Freezing a cgroup freezes all +tasks belonging to the cgroup and all its descendant cgroups. Each +cgroup has its own state (self-state) and the state inherited from the +parent (parent-state). Iff both states are THAWED, the cgroup is +THAWED. + +The following cgroupfs files are created by cgroup freezer. + +* freezer.state: Read-write. + + When read, returns the effective state of the cgroup - "THAWED", + "FREEZING" or "FROZEN". This is the combined self and parent-states. + If any is freezing, the cgroup is freezing (FREEZING or FROZEN). + + FREEZING cgroup transitions into FROZEN state when all tasks + belonging to the cgroup and its descendants become frozen. Note that + a cgroup reverts to FREEZING from FROZEN after a new task is added + to the cgroup or one of its descendant cgroups until the new task is + frozen. + + When written, sets the self-state of the cgroup. Two values are + allowed - "FROZEN" and "THAWED". If FROZEN is written, the cgroup, + if not already freezing, enters FREEZING state along with all its + descendant cgroups. + + If THAWED is written, the self-state of the cgroup is changed to + THAWED. Note that the effective state may not change to THAWED if + the parent-state is still freezing. If a cgroup's effective state + becomes THAWED, all its descendants which are freezing because of + the cgroup also leave the freezing state. + +* freezer.self_freezing: Read only. + + Shows the self-state. 0 if the self-state is THAWED; otherwise, 1. + This value is 1 iff the last write to freezer.state was "FROZEN". + +* freezer.parent_freezing: Read only. + + Shows the parent-state. 0 if none of the cgroup's ancestors is + frozen; otherwise, 1. + +The root cgroup is non-freezable and the above interface files don't +exist. + +* Examples of usage:: + + # mkdir /sys/fs/cgroup/freezer + # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer + # mkdir /sys/fs/cgroup/freezer/0 + # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks + +to get status of the freezer subsystem:: + + # cat /sys/fs/cgroup/freezer/0/freezer.state + THAWED + +to freeze all tasks in the container:: + + # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state + FREEZING + # cat /sys/fs/cgroup/freezer/0/freezer.state + FROZEN + +to unfreeze all tasks in the container:: + + # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state + THAWED + +This is the basic mechanism which should do the right thing for user space task +in a simple scenario. diff --git a/Documentation/admin-guide/cgroup-v1/hugetlb.rst b/Documentation/admin-guide/cgroup-v1/hugetlb.rst new file mode 100644 index 000000000000..a3902aa253a9 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/hugetlb.rst @@ -0,0 +1,50 @@ +================== +HugeTLB Controller +================== + +The HugeTLB controller allows to limit the HugeTLB usage per control group and +enforces the controller limit during page fault. Since HugeTLB doesn't +support page reclaim, enforcing the limit at page fault time implies that, +the application will get SIGBUS signal if it tries to access HugeTLB pages +beyond its limit. This requires the application to know beforehand how much +HugeTLB pages it would require for its use. + +HugeTLB controller can be created by first mounting the cgroup filesystem. + +# mount -t cgroup -o hugetlb none /sys/fs/cgroup + +With the above step, the initial or the parent HugeTLB group becomes +visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in +the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup. + +New groups can be created under the parent group /sys/fs/cgroup:: + + # cd /sys/fs/cgroup + # mkdir g1 + # echo $$ > g1/tasks + +The above steps create a new group g1 and move the current shell +process (bash) into it. + +Brief summary of control files:: + + hugetlb..limit_in_bytes # set/show limit of "hugepagesize" hugetlb usage + hugetlb..max_usage_in_bytes # show max "hugepagesize" hugetlb usage recorded + hugetlb..usage_in_bytes # show current usage for "hugepagesize" hugetlb + hugetlb..failcnt # show the number of allocation failure due to HugeTLB limit + +For a system supporting three hugepage sizes (64k, 32M and 1G), the control +files include:: + + hugetlb.1GB.limit_in_bytes + hugetlb.1GB.max_usage_in_bytes + hugetlb.1GB.usage_in_bytes + hugetlb.1GB.failcnt + hugetlb.64KB.limit_in_bytes + hugetlb.64KB.max_usage_in_bytes + hugetlb.64KB.usage_in_bytes + hugetlb.64KB.failcnt + hugetlb.32MB.limit_in_bytes + hugetlb.32MB.max_usage_in_bytes + hugetlb.32MB.usage_in_bytes + hugetlb.32MB.failcnt diff --git a/Documentation/admin-guide/cgroup-v1/index.rst b/Documentation/admin-guide/cgroup-v1/index.rst new file mode 100644 index 000000000000..10bf48bae0b0 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/index.rst @@ -0,0 +1,28 @@ +======================== +Control Groups version 1 +======================== + +.. toctree:: + :maxdepth: 1 + + cgroups + + blkio-controller + cpuacct + cpusets + devices + freezer-subsystem + hugetlb + memcg_test + memory + net_cls + net_prio + pids + rdma + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/admin-guide/cgroup-v1/memcg_test.rst b/Documentation/admin-guide/cgroup-v1/memcg_test.rst new file mode 100644 index 000000000000..3f7115e07b5d --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/memcg_test.rst @@ -0,0 +1,355 @@ +===================================================== +Memory Resource Controller(Memcg) Implementation Memo +===================================================== + +Last Updated: 2010/2 + +Base Kernel Version: based on 2.6.33-rc7-mm(candidate for 34). + +Because VM is getting complex (one of reasons is memcg...), memcg's behavior +is complex. This is a document for memcg's internal behavior. +Please note that implementation details can be changed. + +(*) Topics on API should be in Documentation/admin-guide/cgroup-v1/memory.rst) + +0. How to record usage ? +======================== + + 2 objects are used. + + page_cgroup ....an object per page. + + Allocated at boot or memory hotplug. Freed at memory hot removal. + + swap_cgroup ... an entry per swp_entry. + + Allocated at swapon(). Freed at swapoff(). + + The page_cgroup has USED bit and double count against a page_cgroup never + occurs. swap_cgroup is used only when a charged page is swapped-out. + +1. Charge +========= + + a page/swp_entry may be charged (usage += PAGE_SIZE) at + + mem_cgroup_try_charge() + +2. Uncharge +=========== + + a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by + + mem_cgroup_uncharge() + Called when a page's refcount goes down to 0. + + mem_cgroup_uncharge_swap() + Called when swp_entry's refcnt goes down to 0. A charge against swap + disappears. + +3. charge-commit-cancel +======================= + + Memcg pages are charged in two steps: + + - mem_cgroup_try_charge() + - mem_cgroup_commit_charge() or mem_cgroup_cancel_charge() + + At try_charge(), there are no flags to say "this page is charged". + at this point, usage += PAGE_SIZE. + + At commit(), the page is associated with the memcg. + + At cancel(), simply usage -= PAGE_SIZE. + +Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. + +4. Anonymous +============ + + Anonymous page is newly allocated at + - page fault into MAP_ANONYMOUS mapping. + - Copy-On-Write. + + 4.1 Swap-in. + At swap-in, the page is taken from swap-cache. There are 2 cases. + + (a) If the SwapCache is newly allocated and read, it has no charges. + (b) If the SwapCache has been mapped by processes, it has been + charged already. + + 4.2 Swap-out. + At swap-out, typical state transition is below. + + (a) add to swap cache. (marked as SwapCache) + swp_entry's refcnt += 1. + (b) fully unmapped. + swp_entry's refcnt += # of ptes. + (c) write back to swap. + (d) delete from swap cache. (remove from SwapCache) + swp_entry's refcnt -= 1. + + + Finally, at task exit, + (e) zap_pte() is called and swp_entry's refcnt -=1 -> 0. + +5. Page Cache +============= + + Page Cache is charged at + - add_to_page_cache_locked(). + + The logic is very clear. (About migration, see below) + + Note: + __remove_from_page_cache() is called by remove_from_page_cache() + and __remove_mapping(). + +6. Shmem(tmpfs) Page Cache +=========================== + + The best way to understand shmem's page state transition is to read + mm/shmem.c. + + But brief explanation of the behavior of memcg around shmem will be + helpful to understand the logic. + + Shmem's page (just leaf page, not direct/indirect block) can be on + + - radix-tree of shmem's inode. + - SwapCache. + - Both on radix-tree and SwapCache. This happens at swap-in + and swap-out, + + It's charged when... + + - A new page is added to shmem's radix-tree. + - A swp page is read. (move a charge from swap_cgroup to page_cgroup) + +7. Page Migration +================= + + mem_cgroup_migrate() + +8. LRU +====== + Each memcg has its own private LRU. Now, its handling is under global + VM's control (means that it's handled under global pgdat->lru_lock). + Almost all routines around memcg's LRU is called by global LRU's + list management functions under pgdat->lru_lock. + + A special function is mem_cgroup_isolate_pages(). This scans + memcg's private LRU and call __isolate_lru_page() to extract a page + from LRU. + + (By __isolate_lru_page(), the page is removed from both of global and + private LRU.) + + +9. Typical Tests. +================= + + Tests for racy cases. + +9.1 Small limit to memcg. +------------------------- + + When you do test to do racy case, it's good test to set memcg's limit + to be very small rather than GB. Many races found in the test under + xKB or xxMB limits. + + (Memory behavior under GB and Memory behavior under MB shows very + different situation.) + +9.2 Shmem +--------- + + Historically, memcg's shmem handling was poor and we saw some amount + of troubles here. This is because shmem is page-cache but can be + SwapCache. Test with shmem/tmpfs is always good test. + +9.3 Migration +------------- + + For NUMA, migration is an another special case. To do easy test, cpuset + is useful. Following is a sample script to do migration:: + + mount -t cgroup -o cpuset none /opt/cpuset + + mkdir /opt/cpuset/01 + echo 1 > /opt/cpuset/01/cpuset.cpus + echo 0 > /opt/cpuset/01/cpuset.mems + echo 1 > /opt/cpuset/01/cpuset.memory_migrate + mkdir /opt/cpuset/02 + echo 1 > /opt/cpuset/02/cpuset.cpus + echo 1 > /opt/cpuset/02/cpuset.mems + echo 1 > /opt/cpuset/02/cpuset.memory_migrate + + In above set, when you moves a task from 01 to 02, page migration to + node 0 to node 1 will occur. Following is a script to migrate all + under cpuset.:: + + -- + move_task() + { + for pid in $1 + do + /bin/echo $pid >$2/tasks 2>/dev/null + echo -n $pid + echo -n " " + done + echo END + } + + G1_TASK=`cat ${G1}/tasks` + G2_TASK=`cat ${G2}/tasks` + move_task "${G1_TASK}" ${G2} & + -- + +9.4 Memory hotplug +------------------ + + memory hotplug test is one of good test. + + to offline memory, do following:: + + # echo offline > /sys/devices/system/memory/memoryXXX/state + + (XXX is the place of memory) + + This is an easy way to test page migration, too. + +9.5 mkdir/rmdir +--------------- + + When using hierarchy, mkdir/rmdir test should be done. + Use tests like the following:: + + echo 1 >/opt/cgroup/01/memory/use_hierarchy + mkdir /opt/cgroup/01/child_a + mkdir /opt/cgroup/01/child_b + + set limit to 01. + add limit to 01/child_b + run jobs under child_a and child_b + + create/delete following groups at random while jobs are running:: + + /opt/cgroup/01/child_a/child_aa + /opt/cgroup/01/child_b/child_bb + /opt/cgroup/01/child_c + + running new jobs in new group is also good. + +9.6 Mount with other subsystems +------------------------------- + + Mounting with other subsystems is a good test because there is a + race and lock dependency with other cgroup subsystems. + + example:: + + # mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices + + and do task move, mkdir, rmdir etc...under this. + +9.7 swapoff +----------- + + Besides management of swap is one of complicated parts of memcg, + call path of swap-in at swapoff is not same as usual swap-in path.. + It's worth to be tested explicitly. + + For example, test like following is good: + + (Shell-A):: + + # mount -t cgroup none /cgroup -o memory + # mkdir /cgroup/test + # echo 40M > /cgroup/test/memory.limit_in_bytes + # echo 0 > /cgroup/test/tasks + + Run malloc(100M) program under this. You'll see 60M of swaps. + + (Shell-B):: + + # move all tasks in /cgroup/test to /cgroup + # /sbin/swapoff -a + # rmdir /cgroup/test + # kill malloc task. + + Of course, tmpfs v.s. swapoff test should be tested, too. + +9.8 OOM-Killer +-------------- + + Out-of-memory caused by memcg's limit will kill tasks under + the memcg. When hierarchy is used, a task under hierarchy + will be killed by the kernel. + + In this case, panic_on_oom shouldn't be invoked and tasks + in other groups shouldn't be killed. + + It's not difficult to cause OOM under memcg as following. + + Case A) when you can swapoff:: + + #swapoff -a + #echo 50M > /memory.limit_in_bytes + + run 51M of malloc + + Case B) when you use mem+swap limitation:: + + #echo 50M > memory.limit_in_bytes + #echo 50M > memory.memsw.limit_in_bytes + + run 51M of malloc + +9.9 Move charges at task migration +---------------------------------- + + Charges associated with a task can be moved along with task migration. + + (Shell-A):: + + #mkdir /cgroup/A + #echo $$ >/cgroup/A/tasks + + run some programs which uses some amount of memory in /cgroup/A. + + (Shell-B):: + + #mkdir /cgroup/B + #echo 1 >/cgroup/B/memory.move_charge_at_immigrate + #echo "pid of the program running in group A" >/cgroup/B/tasks + + You can see charges have been moved by reading ``*.usage_in_bytes`` or + memory.stat of both A and B. + + See 8.2 of Documentation/admin-guide/cgroup-v1/memory.rst to see what value should + be written to move_charge_at_immigrate. + +9.10 Memory thresholds +---------------------- + + Memory controller implements memory thresholds using cgroups notification + API. You can use tools/cgroup/cgroup_event_listener.c to test it. + + (Shell-A) Create cgroup and run event listener:: + + # mkdir /cgroup/A + # ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M + + (Shell-B) Add task to cgroup and try to allocate and free memory:: + + # echo $$ >/cgroup/A/tasks + # a="$(dd if=/dev/zero bs=1M count=10)" + # a= + + You will see message from cgroup_event_listener every time you cross + the thresholds. + + Use /cgroup/A/memory.memsw.usage_in_bytes to test memsw thresholds. + + It's good idea to test root cgroup as well. diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst new file mode 100644 index 000000000000..41bdc038dad9 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/memory.rst @@ -0,0 +1,1003 @@ +========================== +Memory Resource Controller +========================== + +NOTE: + This document is hopelessly outdated and it asks for a complete + rewrite. It still contains a useful information so we are keeping it + here but make sure to check the current code if you need a deeper + understanding. + +NOTE: + The Memory Resource Controller has generically been referred to as the + memory controller in this document. Do not confuse memory controller + used here with the memory controller that is used in hardware. + +(For editors) In this document: + When we mention a cgroup (cgroupfs's directory) with memory controller, + we call it "memory cgroup". When you see git-log and source code, you'll + see patch's title and function names tend to use "memcg". + In this document, we avoid using it. + +Benefits and Purpose of the memory controller +============================================= + +The memory controller isolates the memory behaviour of a group of tasks +from the rest of the system. The article on LWN [12] mentions some probable +uses of the memory controller. The memory controller can be used to + +a. Isolate an application or a group of applications + Memory-hungry applications can be isolated and limited to a smaller + amount of memory. +b. Create a cgroup with a limited amount of memory; this can be used + as a good alternative to booting with mem=XXXX. +c. Virtualization solutions can control the amount of memory they want + to assign to a virtual machine instance. +d. A CD/DVD burner could control the amount of memory used by the + rest of the system to ensure that burning does not fail due to lack + of available memory. +e. There are several other use cases; find one or use the controller just + for fun (to learn and hack on the VM subsystem). + +Current Status: linux-2.6.34-mmotm(development version of 2010/April) + +Features: + + - accounting anonymous pages, file caches, swap caches usage and limiting them. + - pages are linked to per-memcg LRU exclusively, and there is no global LRU. + - optionally, memory+swap usage can be accounted and limited. + - hierarchical accounting + - soft limit + - moving (recharging) account at moving a task is selectable. + - usage threshold notifier + - memory pressure notifier + - oom-killer disable knob and oom-notifier + - Root cgroup has no limit controls. + + Kernel memory support is a work in progress, and the current version provides + basically functionality. (See Section 2.7) + +Brief summary of control files. + +==================================== ========================================== + tasks attach a task(thread) and show list of + threads + cgroup.procs show list of processes + cgroup.event_control an interface for event_fd() + memory.usage_in_bytes show current usage for memory + (See 5.5 for details) + memory.memsw.usage_in_bytes show current usage for memory+Swap + (See 5.5 for details) + memory.limit_in_bytes set/show limit of memory usage + memory.memsw.limit_in_bytes set/show limit of memory+Swap usage + memory.failcnt show the number of memory usage hits limits + memory.memsw.failcnt show the number of memory+Swap hits limits + memory.max_usage_in_bytes show max memory usage recorded + memory.memsw.max_usage_in_bytes show max memory+Swap usage recorded + memory.soft_limit_in_bytes set/show soft limit of memory usage + memory.stat show various statistics + memory.use_hierarchy set/show hierarchical account enabled + memory.force_empty trigger forced page reclaim + memory.pressure_level set memory pressure notifications + memory.swappiness set/show swappiness parameter of vmscan + (See sysctl's vm.swappiness) + memory.move_charge_at_immigrate set/show controls of moving charges + memory.oom_control set/show oom controls. + memory.numa_stat show the number of memory usage per numa + node + + memory.kmem.limit_in_bytes set/show hard limit for kernel memory + memory.kmem.usage_in_bytes show current kernel memory allocation + memory.kmem.failcnt show the number of kernel memory usage + hits limits + memory.kmem.max_usage_in_bytes show max kernel memory usage recorded + + memory.kmem.tcp.limit_in_bytes set/show hard limit for tcp buf memory + memory.kmem.tcp.usage_in_bytes show current tcp buf memory allocation + memory.kmem.tcp.failcnt show the number of tcp buf memory usage + hits limits + memory.kmem.tcp.max_usage_in_bytes show max tcp buf memory usage recorded +==================================== ========================================== + +1. History +========== + +The memory controller has a long history. A request for comments for the memory +controller was posted by Balbir Singh [1]. At the time the RFC was posted +there were several implementations for memory control. The goal of the +RFC was to build consensus and agreement for the minimal features required +for memory control. The first RSS controller was posted by Balbir Singh[2] +in Feb 2007. Pavel Emelianov [3][4][5] has since posted three versions of the +RSS controller. At OLS, at the resource management BoF, everyone suggested +that we handle both page cache and RSS together. Another request was raised +to allow user space handling of OOM. The current memory controller is +at version 6; it combines both mapped (RSS) and unmapped Page +Cache Control [11]. + +2. Memory Control +================= + +Memory is a unique resource in the sense that it is present in a limited +amount. If a task requires a lot of CPU processing, the task can spread +its processing over a period of hours, days, months or years, but with +memory, the same physical memory needs to be reused to accomplish the task. + +The memory controller implementation has been divided into phases. These +are: + +1. Memory controller +2. mlock(2) controller +3. Kernel user memory accounting and slab control +4. user mappings length controller + +The memory controller is the first controller developed. + +2.1. Design +----------- + +The core of the design is a counter called the page_counter. The +page_counter tracks the current memory usage and limit of the group of +processes associated with the controller. Each cgroup has a memory controller +specific data structure (mem_cgroup) associated with it. + +2.2. Accounting +--------------- + +:: + + +--------------------+ + | mem_cgroup | + | (page_counter) | + +--------------------+ + / ^ \ + / | \ + +---------------+ | +---------------+ + | mm_struct | |.... | mm_struct | + | | | | | + +---------------+ | +---------------+ + | + + --------------+ + | + +---------------+ +------+--------+ + | page +----------> page_cgroup| + | | | | + +---------------+ +---------------+ + + (Figure 1: Hierarchy of Accounting) + + +Figure 1 shows the important aspects of the controller + +1. Accounting happens per cgroup +2. Each mm_struct knows about which cgroup it belongs to +3. Each page has a pointer to the page_cgroup, which in turn knows the + cgroup it belongs to + +The accounting is done as follows: mem_cgroup_charge_common() is invoked to +set up the necessary data structures and check if the cgroup that is being +charged is over its limit. If it is, then reclaim is invoked on the cgroup. +More details can be found in the reclaim section of this document. +If everything goes well, a page meta-data-structure called page_cgroup is +updated. page_cgroup has its own LRU on cgroup. +(*) page_cgroup structure is allocated at boot/memory-hotplug time. + +2.2.1 Accounting details +------------------------ + +All mapped anon pages (RSS) and cache pages (Page Cache) are accounted. +Some pages which are never reclaimable and will not be on the LRU +are not accounted. We just account pages under usual VM management. + +RSS pages are accounted at page_fault unless they've already been accounted +for earlier. A file page will be accounted for as Page Cache when it's +inserted into inode (radix-tree). While it's mapped into the page tables of +processes, duplicate accounting is carefully avoided. + +An RSS page is unaccounted when it's fully unmapped. A PageCache page is +unaccounted when it's removed from radix-tree. Even if RSS pages are fully +unmapped (by kswapd), they may exist as SwapCache in the system until they +are really freed. Such SwapCaches are also accounted. +A swapped-in page is not accounted until it's mapped. + +Note: The kernel does swapin-readahead and reads multiple swaps at once. +This means swapped-in pages may contain pages for other tasks than a task +causing page fault. So, we avoid accounting at swap-in I/O. + +At page migration, accounting information is kept. + +Note: we just account pages-on-LRU because our purpose is to control amount +of used pages; not-on-LRU pages tend to be out-of-control from VM view. + +2.3 Shared Page Accounting +-------------------------- + +Shared pages are accounted on the basis of the first touch approach. The +cgroup that first touches a page is accounted for the page. The principle +behind this approach is that a cgroup that aggressively uses a shared +page will eventually get charged for it (once it is uncharged from +the cgroup that brought it in -- this will happen on memory pressure). + +But see section 8.2: when moving a task to another cgroup, its pages may +be recharged to the new cgroup, if move_charge_at_immigrate has been chosen. + +Exception: If CONFIG_MEMCG_SWAP is not used. +When you do swapoff and make swapped-out pages of shmem(tmpfs) to +be backed into memory in force, charges for pages are accounted against the +caller of swapoff rather than the users of shmem. + +2.4 Swap Extension (CONFIG_MEMCG_SWAP) +-------------------------------------- + +Swap Extension allows you to record charge for swap. A swapped-in page is +charged back to original page allocator if possible. + +When swap is accounted, following files are added. + + - memory.memsw.usage_in_bytes. + - memory.memsw.limit_in_bytes. + +memsw means memory+swap. Usage of memory+swap is limited by +memsw.limit_in_bytes. + +Example: Assume a system with 4G of swap. A task which allocates 6G of memory +(by mistake) under 2G memory limitation will use all swap. +In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap. +By using the memsw limit, you can avoid system OOM which can be caused by swap +shortage. + +**why 'memory+swap' rather than swap** + +The global LRU(kswapd) can swap out arbitrary pages. Swap-out means +to move account from memory to swap...there is no change in usage of +memory+swap. In other words, when we want to limit the usage of swap without +affecting global LRU, memory+swap limit is better than just limiting swap from +an OS point of view. + +**What happens when a cgroup hits memory.memsw.limit_in_bytes** + +When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out +in this cgroup. Then, swap-out will not be done by cgroup routine and file +caches are dropped. But as mentioned above, global LRU can do swapout memory +from it for sanity of the system's memory management state. You can't forbid +it by cgroup. + +2.5 Reclaim +----------- + +Each cgroup maintains a per cgroup LRU which has the same structure as +global VM. When a cgroup goes over its limit, we first try +to reclaim memory from the cgroup so as to make space for the new +pages that the cgroup has touched. If the reclaim is unsuccessful, +an OOM routine is invoked to select and kill the bulkiest task in the +cgroup. (See 10. OOM Control below.) + +The reclaim algorithm has not been modified for cgroups, except that +pages that are selected for reclaiming come from the per-cgroup LRU +list. + +NOTE: + Reclaim does not work for the root cgroup, since we cannot set any + limits on the root cgroup. + +Note2: + When panic_on_oom is set to "2", the whole system will panic. + +When oom event notifier is registered, event will be delivered. +(See oom_control section) + +2.6 Locking +----------- + + lock_page_cgroup()/unlock_page_cgroup() should not be called under + the i_pages lock. + + Other lock order is following: + + PG_locked. + mm->page_table_lock + pgdat->lru_lock + lock_page_cgroup. + + In many cases, just lock_page_cgroup() is called. + + per-zone-per-cgroup LRU (cgroup's private LRU) is just guarded by + pgdat->lru_lock, it has no lock of its own. + +2.7 Kernel Memory Extension (CONFIG_MEMCG_KMEM) +----------------------------------------------- + +With the Kernel memory extension, the Memory Controller is able to limit +the amount of kernel memory used by the system. Kernel memory is fundamentally +different than user memory, since it can't be swapped out, which makes it +possible to DoS the system by consuming too much of this precious resource. + +Kernel memory accounting is enabled for all memory cgroups by default. But +it can be disabled system-wide by passing cgroup.memory=nokmem to the kernel +at boot time. In this case, kernel memory will not be accounted at all. + +Kernel memory limits are not imposed for the root cgroup. Usage for the root +cgroup may or may not be accounted. The memory used is accumulated into +memory.kmem.usage_in_bytes, or in a separate counter when it makes sense. +(currently only for tcp). + +The main "kmem" counter is fed into the main counter, so kmem charges will +also be visible from the user counter. + +Currently no soft limit is implemented for kernel memory. It is future work +to trigger slab reclaim when those limits are reached. + +2.7.1 Current Kernel Memory resources accounted +----------------------------------------------- + +stack pages: + every process consumes some stack pages. By accounting into + kernel memory, we prevent new processes from being created when the kernel + memory usage is too high. + +slab pages: + pages allocated by the SLAB or SLUB allocator are tracked. A copy + of each kmem_cache is created every time the cache is touched by the first time + from inside the memcg. The creation is done lazily, so some objects can still be + skipped while the cache is being created. All objects in a slab page should + belong to the same memcg. This only fails to hold when a task is migrated to a + different memcg during the page allocation by the cache. + +sockets memory pressure: + some sockets protocols have memory pressure + thresholds. The Memory Controller allows them to be controlled individually + per cgroup, instead of globally. + +tcp memory pressure: + sockets memory pressure for the tcp protocol. + +2.7.2 Common use cases +---------------------- + +Because the "kmem" counter is fed to the main user counter, kernel memory can +never be limited completely independently of user memory. Say "U" is the user +limit, and "K" the kernel limit. There are three possible ways limits can be +set: + +U != 0, K = unlimited: + This is the standard memcg limitation mechanism already present before kmem + accounting. Kernel memory is completely ignored. + +U != 0, K < U: + Kernel memory is a subset of the user memory. This setup is useful in + deployments where the total amount of memory per-cgroup is overcommited. + Overcommiting kernel memory limits is definitely not recommended, since the + box can still run out of non-reclaimable memory. + In this case, the admin could set up K so that the sum of all groups is + never greater than the total memory, and freely set U at the cost of his + QoS. + +WARNING: + In the current implementation, memory reclaim will NOT be + triggered for a cgroup when it hits K while staying below U, which makes + this setup impractical. + +U != 0, K >= U: + Since kmem charges will also be fed to the user counter and reclaim will be + triggered for the cgroup for both kinds of memory. This setup gives the + admin a unified view of memory, and it is also useful for people who just + want to track kernel memory usage. + +3. User Interface +================= + +3.0. Configuration +------------------ + +a. Enable CONFIG_CGROUPS +b. Enable CONFIG_MEMCG +c. Enable CONFIG_MEMCG_SWAP (to use swap extension) +d. Enable CONFIG_MEMCG_KMEM (to use kmem extension) + +3.1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?) +------------------------------------------------------------------- + +:: + + # mount -t tmpfs none /sys/fs/cgroup + # mkdir /sys/fs/cgroup/memory + # mount -t cgroup none /sys/fs/cgroup/memory -o memory + +3.2. Make the new group and move bash into it:: + + # mkdir /sys/fs/cgroup/memory/0 + # echo $$ > /sys/fs/cgroup/memory/0/tasks + +Since now we're in the 0 cgroup, we can alter the memory limit:: + + # echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes + +NOTE: + We can use a suffix (k, K, m, M, g or G) to indicate values in kilo, + mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, + Gibibytes.) + +NOTE: + We can write "-1" to reset the ``*.limit_in_bytes(unlimited)``. + +NOTE: + We cannot set limits on the root cgroup any more. + +:: + + # cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes + 4194304 + +We can check the usage:: + + # cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes + 1216512 + +A successful write to this file does not guarantee a successful setting of +this limit to the value written into the file. This can be due to a +number of factors, such as rounding up to page boundaries or the total +availability of memory on the system. The user is required to re-read +this file after a write to guarantee the value committed by the kernel:: + + # echo 1 > memory.limit_in_bytes + # cat memory.limit_in_bytes + 4096 + +The memory.failcnt field gives the number of times that the cgroup limit was +exceeded. + +The memory.stat file gives accounting information. Now, the number of +caches, RSS and Active pages/Inactive pages are shown. + +4. Testing +========== + +For testing features and implementation, see memcg_test.txt. + +Performance test is also important. To see pure memory controller's overhead, +testing on tmpfs will give you good numbers of small overheads. +Example: do kernel make on tmpfs. + +Page-fault scalability is also important. At measuring parallel +page fault test, multi-process test may be better than multi-thread +test because it has noise of shared objects/status. + +But the above two are testing extreme situations. +Trying usual test under memory controller is always helpful. + +4.1 Troubleshooting +------------------- + +Sometimes a user might find that the application under a cgroup is +terminated by the OOM killer. There are several causes for this: + +1. The cgroup limit is too low (just too low to do anything useful) +2. The user is using anonymous memory and swap is turned off or too low + +A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of +some of the pages cached in the cgroup (page cache pages). + +To know what happens, disabling OOM_Kill as per "10. OOM Control" (below) and +seeing what happens will be helpful. + +4.2 Task migration +------------------ + +When a task migrates from one cgroup to another, its charge is not +carried forward by default. The pages allocated from the original cgroup still +remain charged to it, the charge is dropped when the page is freed or +reclaimed. + +You can move charges of a task along with task migration. +See 8. "Move charges at task migration" + +4.3 Removing a cgroup +--------------------- + +A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a +cgroup might have some charge associated with it, even though all +tasks have migrated away from it. (because we charge against pages, not +against tasks.) + +We move the stats to root (if use_hierarchy==0) or parent (if +use_hierarchy==1), and no change on the charge except uncharging +from the child. + +Charges recorded in swap information is not updated at removal of cgroup. +Recorded information is discarded and a cgroup which uses swap (swapcache) +will be charged as a new owner of it. + +About use_hierarchy, see Section 6. + +5. Misc. interfaces +=================== + +5.1 force_empty +--------------- + memory.force_empty interface is provided to make cgroup's memory usage empty. + When writing anything to this:: + + # echo 0 > memory.force_empty + + the cgroup will be reclaimed and as many pages reclaimed as possible. + + The typical use case for this interface is before calling rmdir(). + Though rmdir() offlines memcg, but the memcg may still stay there due to + charged file caches. Some out-of-use page caches may keep charged until + memory pressure happens. If you want to avoid that, force_empty will be useful. + + Also, note that when memory.kmem.limit_in_bytes is set the charges due to + kernel pages will still be seen. This is not considered a failure and the + write will still return success. In this case, it is expected that + memory.kmem.usage_in_bytes == memory.usage_in_bytes. + + About use_hierarchy, see Section 6. + +5.2 stat file +------------- + +memory.stat file includes following statistics + +per-memory cgroup local status +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +=============== =============================================================== +cache # of bytes of page cache memory. +rss # of bytes of anonymous and swap cache memory (includes + transparent hugepages). +rss_huge # of bytes of anonymous transparent hugepages. +mapped_file # of bytes of mapped file (includes tmpfs/shmem) +pgpgin # of charging events to the memory cgroup. The charging + event happens each time a page is accounted as either mapped + anon page(RSS) or cache page(Page Cache) to the cgroup. +pgpgout # of uncharging events to the memory cgroup. The uncharging + event happens each time a page is unaccounted from the cgroup. +swap # of bytes of swap usage +dirty # of bytes that are waiting to get written back to the disk. +writeback # of bytes of file/anon cache that are queued for syncing to + disk. +inactive_anon # of bytes of anonymous and swap cache memory on inactive + LRU list. +active_anon # of bytes of anonymous and swap cache memory on active + LRU list. +inactive_file # of bytes of file-backed memory on inactive LRU list. +active_file # of bytes of file-backed memory on active LRU list. +unevictable # of bytes of memory that cannot be reclaimed (mlocked etc). +=============== =============================================================== + +status considering hierarchy (see memory.use_hierarchy settings) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +========================= =================================================== +hierarchical_memory_limit # of bytes of memory limit with regard to hierarchy + under which the memory cgroup is +hierarchical_memsw_limit # of bytes of memory+swap limit with regard to + hierarchy under which memory cgroup is. + +total_ # hierarchical version of , which in + addition to the cgroup's own value includes the + sum of all hierarchical children's values of + , i.e. total_cache +========================= =================================================== + +The following additional stats are dependent on CONFIG_DEBUG_VM +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +========================= ======================================== +recent_rotated_anon VM internal parameter. (see mm/vmscan.c) +recent_rotated_file VM internal parameter. (see mm/vmscan.c) +recent_scanned_anon VM internal parameter. (see mm/vmscan.c) +recent_scanned_file VM internal parameter. (see mm/vmscan.c) +========================= ======================================== + +Memo: + recent_rotated means recent frequency of LRU rotation. + recent_scanned means recent # of scans to LRU. + showing for better debug please see the code for meanings. + +Note: + Only anonymous and swap cache memory is listed as part of 'rss' stat. + This should not be confused with the true 'resident set size' or the + amount of physical memory used by the cgroup. + + 'rss + mapped_file" will give you resident set size of cgroup. + + (Note: file and shmem may be shared among other cgroups. In that case, + mapped_file is accounted only when the memory cgroup is owner of page + cache.) + +5.3 swappiness +-------------- + +Overrides /proc/sys/vm/swappiness for the particular group. The tunable +in the root cgroup corresponds to the global swappiness setting. + +Please note that unlike during the global reclaim, limit reclaim +enforces that 0 swappiness really prevents from any swapping even if +there is a swap storage available. This might lead to memcg OOM killer +if there are no file pages to reclaim. + +5.4 failcnt +----------- + +A memory cgroup provides memory.failcnt and memory.memsw.failcnt files. +This failcnt(== failure count) shows the number of times that a usage counter +hit its limit. When a memory cgroup hits a limit, failcnt increases and +memory under it will be reclaimed. + +You can reset failcnt by writing 0 to failcnt file:: + + # echo 0 > .../memory.failcnt + +5.5 usage_in_bytes +------------------ + +For efficiency, as other kernel components, memory cgroup uses some optimization +to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the +method and doesn't show 'exact' value of memory (and swap) usage, it's a fuzz +value for efficient access. (Of course, when necessary, it's synchronized.) +If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP) +value in memory.stat(see 5.2). + +5.6 numa_stat +------------- + +This is similar to numa_maps but operates on a per-memcg basis. This is +useful for providing visibility into the numa locality information within +an memcg since the pages are allowed to be allocated from any physical +node. One of the use cases is evaluating application performance by +combining this information with the application's CPU allocation. + +Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable" +per-node page counts including "hierarchical_" which sums up all +hierarchical children's values in addition to the memcg's own value. + +The output format of memory.numa_stat is:: + + total= N0= N1= ... + file= N0= N1= ... + anon= N0= N1= ... + unevictable= N0= N1= ... + hierarchical_= N0= N1= ... + +The "total" count is sum of file + anon + unevictable. + +6. Hierarchy support +==================== + +The memory controller supports a deep hierarchy and hierarchical accounting. +The hierarchy is created by creating the appropriate cgroups in the +cgroup filesystem. Consider for example, the following cgroup filesystem +hierarchy:: + + root + / | \ + / | \ + a b c + | \ + | \ + d e + +In the diagram above, with hierarchical accounting enabled, all memory +usage of e, is accounted to its ancestors up until the root (i.e, c and root), +that has memory.use_hierarchy enabled. If one of the ancestors goes over its +limit, the reclaim algorithm reclaims from the tasks in the ancestor and the +children of the ancestor. + +6.1 Enabling hierarchical accounting and reclaim +------------------------------------------------ + +A memory cgroup by default disables the hierarchy feature. Support +can be enabled by writing 1 to memory.use_hierarchy file of the root cgroup:: + + # echo 1 > memory.use_hierarchy + +The feature can be disabled by:: + + # echo 0 > memory.use_hierarchy + +NOTE1: + Enabling/disabling will fail if either the cgroup already has other + cgroups created below it, or if the parent cgroup has use_hierarchy + enabled. + +NOTE2: + When panic_on_oom is set to "2", the whole system will panic in + case of an OOM event in any cgroup. + +7. Soft limits +============== + +Soft limits allow for greater sharing of memory. The idea behind soft limits +is to allow control groups to use as much of the memory as needed, provided + +a. There is no memory contention +b. They do not exceed their hard limit + +When the system detects memory contention or low memory, control groups +are pushed back to their soft limits. If the soft limit of each control +group is very high, they are pushed back as much as possible to make +sure that one control group does not starve the others of memory. + +Please note that soft limits is a best-effort feature; it comes with +no guarantees, but it does its best to make sure that when memory is +heavily contended for, memory is allocated based on the soft limit +hints/setup. Currently soft limit based reclaim is set up such that +it gets invoked from balance_pgdat (kswapd). + +7.1 Interface +------------- + +Soft limits can be setup by using the following commands (in this example we +assume a soft limit of 256 MiB):: + + # echo 256M > memory.soft_limit_in_bytes + +If we want to change this to 1G, we can at any time use:: + + # echo 1G > memory.soft_limit_in_bytes + +NOTE1: + Soft limits take effect over a long period of time, since they involve + reclaiming memory for balancing between memory cgroups +NOTE2: + It is recommended to set the soft limit always below the hard limit, + otherwise the hard limit will take precedence. + +8. Move charges at task migration +================================= + +Users can move charges associated with a task along with task migration, that +is, uncharge task's pages from the old cgroup and charge them to the new cgroup. +This feature is not supported in !CONFIG_MMU environments because of lack of +page tables. + +8.1 Interface +------------- + +This feature is disabled by default. It can be enabled (and disabled again) by +writing to memory.move_charge_at_immigrate of the destination cgroup. + +If you want to enable it:: + + # echo (some positive value) > memory.move_charge_at_immigrate + +Note: + Each bits of move_charge_at_immigrate has its own meaning about what type + of charges should be moved. See 8.2 for details. +Note: + Charges are moved only when you move mm->owner, in other words, + a leader of a thread group. +Note: + If we cannot find enough space for the task in the destination cgroup, we + try to make space by reclaiming memory. Task migration may fail if we + cannot make enough space. +Note: + It can take several seconds if you move charges much. + +And if you want disable it again:: + + # echo 0 > memory.move_charge_at_immigrate + +8.2 Type of charges which can be moved +-------------------------------------- + +Each bit in move_charge_at_immigrate has its own meaning about what type of +charges should be moved. But in any case, it must be noted that an account of +a page or a swap can be moved only when it is charged to the task's current +(old) memory cgroup. + ++---+--------------------------------------------------------------------------+ +|bit| what type of charges would be moved ? | ++===+==========================================================================+ +| 0 | A charge of an anonymous page (or swap of it) used by the target task. | +| | You must enable Swap Extension (see 2.4) to enable move of swap charges. | ++---+--------------------------------------------------------------------------+ +| 1 | A charge of file pages (normal file, tmpfs file (e.g. ipc shared memory) | +| | and swaps of tmpfs file) mmapped by the target task. Unlike the case of | +| | anonymous pages, file pages (and swaps) in the range mmapped by the task | +| | will be moved even if the task hasn't done page fault, i.e. they might | +| | not be the task's "RSS", but other task's "RSS" that maps the same file. | +| | And mapcount of the page is ignored (the page can be moved even if | +| | page_mapcount(page) > 1). You must enable Swap Extension (see 2.4) to | +| | enable move of swap charges. | ++---+--------------------------------------------------------------------------+ + +8.3 TODO +-------- + +- All of moving charge operations are done under cgroup_mutex. It's not good + behavior to hold the mutex too long, so we may need some trick. + +9. Memory thresholds +==================== + +Memory cgroup implements memory thresholds using the cgroups notification +API (see cgroups.txt). It allows to register multiple memory and memsw +thresholds and gets notifications when it crosses. + +To register a threshold, an application must: + +- create an eventfd using eventfd(2); +- open memory.usage_in_bytes or memory.memsw.usage_in_bytes; +- write string like " " to + cgroup.event_control. + +Application will be notified through eventfd when memory usage crosses +threshold in any direction. + +It's applicable for root and non-root cgroup. + +10. OOM Control +=============== + +memory.oom_control file is for OOM notification and other controls. + +Memory cgroup implements OOM notifier using the cgroup notification +API (See cgroups.txt). It allows to register multiple OOM notification +delivery and gets notification when OOM happens. + +To register a notifier, an application must: + + - create an eventfd using eventfd(2) + - open memory.oom_control file + - write string like " " to + cgroup.event_control + +The application will be notified through eventfd when OOM happens. +OOM notification doesn't work for the root cgroup. + +You can disable the OOM-killer by writing "1" to memory.oom_control file, as: + + #echo 1 > memory.oom_control + +If OOM-killer is disabled, tasks under cgroup will hang/sleep +in memory cgroup's OOM-waitqueue when they request accountable memory. + +For running them, you have to relax the memory cgroup's OOM status by + + * enlarge limit or reduce usage. + +To reduce usage, + + * kill some tasks. + * move some tasks to other group with account migration. + * remove some files (on tmpfs?) + +Then, stopped tasks will work again. + +At reading, current status of OOM is shown. + + - oom_kill_disable 0 or 1 + (if 1, oom-killer is disabled) + - under_oom 0 or 1 + (if 1, the memory cgroup is under OOM, tasks may be stopped.) + +11. Memory Pressure +=================== + +The pressure level notifications can be used to monitor the memory +allocation cost; based on the pressure, applications can implement +different strategies of managing their memory resources. The pressure +levels are defined as following: + +The "low" level means that the system is reclaiming memory for new +allocations. Monitoring this reclaiming activity might be useful for +maintaining cache level. Upon notification, the program (typically +"Activity Manager") might analyze vmstat and act in advance (i.e. +prematurely shutdown unimportant services). + +The "medium" level means that the system is experiencing medium memory +pressure, the system might be making swap, paging out active file caches, +etc. Upon this event applications may decide to further analyze +vmstat/zoneinfo/memcg or internal memory usage statistics and free any +resources that can be easily reconstructed or re-read from a disk. + +The "critical" level means that the system is actively thrashing, it is +about to out of memory (OOM) or even the in-kernel OOM killer is on its +way to trigger. Applications should do whatever they can to help the +system. It might be too late to consult with vmstat or any other +statistics, so it's advisable to take an immediate action. + +By default, events are propagated upward until the event is handled, i.e. the +events are not pass-through. For example, you have three cgroups: A->B->C. Now +you set up an event listener on cgroups A, B and C, and suppose group C +experiences some pressure. In this situation, only group C will receive the +notification, i.e. groups A and B will not receive it. This is done to avoid +excessive "broadcasting" of messages, which disturbs the system and which is +especially bad if we are low on memory or thrashing. Group B, will receive +notification only if there are no event listers for group C. + +There are three optional modes that specify different propagation behavior: + + - "default": this is the default behavior specified above. This mode is the + same as omitting the optional mode parameter, preserved by backwards + compatibility. + + - "hierarchy": events always propagate up to the root, similar to the default + behavior, except that propagation continues regardless of whether there are + event listeners at each level, with the "hierarchy" mode. In the above + example, groups A, B, and C will receive notification of memory pressure. + + - "local": events are pass-through, i.e. they only receive notifications when + memory pressure is experienced in the memcg for which the notification is + registered. In the above example, group C will receive notification if + registered for "local" notification and the group experiences memory + pressure. However, group B will never receive notification, regardless if + there is an event listener for group C or not, if group B is registered for + local notification. + +The level and event notification mode ("hierarchy" or "local", if necessary) are +specified by a comma-delimited string, i.e. "low,hierarchy" specifies +hierarchical, pass-through, notification for all ancestor memcgs. Notification +that is the default, non pass-through behavior, does not specify a mode. +"medium,local" specifies pass-through notification for the medium level. + +The file memory.pressure_level is only used to setup an eventfd. To +register a notification, an application must: + +- create an eventfd using eventfd(2); +- open memory.pressure_level; +- write string as " " + to cgroup.event_control. + +Application will be notified through eventfd when memory pressure is at +the specific level (or higher). Read/write operations to +memory.pressure_level are no implemented. + +Test: + + Here is a small script example that makes a new cgroup, sets up a + memory limit, sets up a notification in the cgroup and then makes child + cgroup experience a critical pressure:: + + # cd /sys/fs/cgroup/memory/ + # mkdir foo + # cd foo + # cgroup_event_listener memory.pressure_level low,hierarchy & + # echo 8000000 > memory.limit_in_bytes + # echo 8000000 > memory.memsw.limit_in_bytes + # echo $$ > tasks + # dd if=/dev/zero | read x + + (Expect a bunch of notifications, and eventually, the oom-killer will + trigger.) + +12. TODO +======== + +1. Make per-cgroup scanner reclaim not-shared pages first +2. Teach controller to account for shared-pages +3. Start reclamation in the background when the limit is + not yet hit but the usage is getting closer + +Summary +======= + +Overall, the memory controller has been a stable controller and has been +commented and discussed quite extensively in the community. + +References +========== + +1. Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/ +2. Singh, Balbir. Memory Controller (RSS Control), + http://lwn.net/Articles/222762/ +3. Emelianov, Pavel. Resource controllers based on process cgroups + http://lkml.org/lkml/2007/3/6/198 +4. Emelianov, Pavel. RSS controller based on process cgroups (v2) + http://lkml.org/lkml/2007/4/9/78 +5. Emelianov, Pavel. RSS controller based on process cgroups (v3) + http://lkml.org/lkml/2007/5/30/244 +6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/ +7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control + subsystem (v3), http://lwn.net/Articles/235534/ +8. Singh, Balbir. RSS controller v2 test results (lmbench), + http://lkml.org/lkml/2007/5/17/232 +9. Singh, Balbir. RSS controller v2 AIM9 results + http://lkml.org/lkml/2007/5/18/1 +10. Singh, Balbir. Memory controller v6 test results, + http://lkml.org/lkml/2007/8/19/36 +11. Singh, Balbir. Memory controller introduction (v6), + http://lkml.org/lkml/2007/8/17/69 +12. Corbet, Jonathan, Controlling memory use in cgroups, + http://lwn.net/Articles/243795/ diff --git a/Documentation/admin-guide/cgroup-v1/net_cls.rst b/Documentation/admin-guide/cgroup-v1/net_cls.rst new file mode 100644 index 000000000000..a2cf272af7a0 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/net_cls.rst @@ -0,0 +1,44 @@ +========================= +Network classifier cgroup +========================= + +The Network classifier cgroup provides an interface to +tag network packets with a class identifier (classid). + +The Traffic Controller (tc) can be used to assign +different priorities to packets from different cgroups. +Also, Netfilter (iptables) can use this tag to perform +actions on such packets. + +Creating a net_cls cgroups instance creates a net_cls.classid file. +This net_cls.classid value is initialized to 0. + +You can write hexadecimal values to net_cls.classid; the format for these +values is 0xAAAABBBB; AAAA is the major handle number and BBBB +is the minor handle number. +Reading net_cls.classid yields a decimal result. + +Example:: + + mkdir /sys/fs/cgroup/net_cls + mount -t cgroup -onet_cls net_cls /sys/fs/cgroup/net_cls + mkdir /sys/fs/cgroup/net_cls/0 + echo 0x100001 > /sys/fs/cgroup/net_cls/0/net_cls.classid + +- setting a 10:1 handle:: + + cat /sys/fs/cgroup/net_cls/0/net_cls.classid + 1048577 + +- configuring tc:: + + tc qdisc add dev eth0 root handle 10: htb + tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit + +- creating traffic class 10:1:: + + tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup + +configuring iptables, basic example:: + + iptables -A OUTPUT -m cgroup ! --cgroup 0x100001 -j DROP diff --git a/Documentation/admin-guide/cgroup-v1/net_prio.rst b/Documentation/admin-guide/cgroup-v1/net_prio.rst new file mode 100644 index 000000000000..b40905871c64 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/net_prio.rst @@ -0,0 +1,57 @@ +======================= +Network priority cgroup +======================= + +The Network priority cgroup provides an interface to allow an administrator to +dynamically set the priority of network traffic generated by various +applications + +Nominally, an application would set the priority of its traffic via the +SO_PRIORITY socket option. This however, is not always possible because: + +1) The application may not have been coded to set this value +2) The priority of application traffic is often a site-specific administrative + decision rather than an application defined one. + +This cgroup allows an administrator to assign a process to a group which defines +the priority of egress traffic on a given interface. Network priority groups can +be created by first mounting the cgroup filesystem:: + + # mount -t cgroup -onet_prio none /sys/fs/cgroup/net_prio + +With the above step, the initial group acting as the parent accounting group +becomes visible at '/sys/fs/cgroup/net_prio'. This group includes all tasks in +the system. '/sys/fs/cgroup/net_prio/tasks' lists the tasks in this cgroup. + +Each net_prio cgroup contains two files that are subsystem specific + +net_prio.prioidx + This file is read-only, and is simply informative. It contains a unique + integer value that the kernel uses as an internal representation of this + cgroup. + +net_prio.ifpriomap + This file contains a map of the priorities assigned to traffic originating + from processes in this group and egressing the system on various interfaces. + It contains a list of tuples in the form . Contents of this + file can be modified by echoing a string into the file using the same tuple + format. For example:: + + echo "eth0 5" > /sys/fs/cgroups/net_prio/iscsi/net_prio.ifpriomap + +This command would force any traffic originating from processes belonging to the +iscsi net_prio cgroup and egressing on interface eth0 to have the priority of +said traffic set to the value 5. The parent accounting group also has a +writeable 'net_prio.ifpriomap' file that can be used to set a system default +priority. + +Priorities are set immediately prior to queueing a frame to the device +queueing discipline (qdisc) so priorities will be assigned prior to the hardware +queue selection being made. + +One usage for the net_prio cgroup is with mqprio qdisc allowing application +traffic to be steered to hardware/driver based traffic classes. These mappings +can then be managed by administrators or other networking protocols such as +DCBX. + +A new net_prio cgroup inherits the parent's configuration. diff --git a/Documentation/admin-guide/cgroup-v1/pids.rst b/Documentation/admin-guide/cgroup-v1/pids.rst new file mode 100644 index 000000000000..6acebd9e72c8 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/pids.rst @@ -0,0 +1,92 @@ +========================= +Process Number Controller +========================= + +Abstract +-------- + +The process number controller is used to allow a cgroup hierarchy to stop any +new tasks from being fork()'d or clone()'d after a certain limit is reached. + +Since it is trivial to hit the task limit without hitting any kmemcg limits in +place, PIDs are a fundamental resource. As such, PID exhaustion must be +preventable in the scope of a cgroup hierarchy by allowing resource limiting of +the number of tasks in a cgroup. + +Usage +----- + +In order to use the `pids` controller, set the maximum number of tasks in +pids.max (this is not available in the root cgroup for obvious reasons). The +number of processes currently in the cgroup is given by pids.current. + +Organisational operations are not blocked by cgroup policies, so it is possible +to have pids.current > pids.max. This can be done by either setting the limit to +be smaller than pids.current, or attaching enough processes to the cgroup such +that pids.current > pids.max. However, it is not possible to violate a cgroup +policy through fork() or clone(). fork() and clone() will return -EAGAIN if the +creation of a new process would cause a cgroup policy to be violated. + +To set a cgroup to have no limit, set pids.max to "max". This is the default for +all new cgroups (N.B. that PID limits are hierarchical, so the most stringent +limit in the hierarchy is followed). + +pids.current tracks all child cgroup hierarchies, so parent/pids.current is a +superset of parent/child/pids.current. + +The pids.events file contains event counters: + + - max: Number of times fork failed because limit was hit. + +Example +------- + +First, we mount the pids controller:: + + # mkdir -p /sys/fs/cgroup/pids + # mount -t cgroup -o pids none /sys/fs/cgroup/pids + +Then we create a hierarchy, set limits and attach processes to it:: + + # mkdir -p /sys/fs/cgroup/pids/parent/child + # echo 2 > /sys/fs/cgroup/pids/parent/pids.max + # echo $$ > /sys/fs/cgroup/pids/parent/cgroup.procs + # cat /sys/fs/cgroup/pids/parent/pids.current + 2 + # + +It should be noted that attempts to overcome the set limit (2 in this case) will +fail:: + + # cat /sys/fs/cgroup/pids/parent/pids.current + 2 + # ( /bin/echo "Here's some processes for you." | cat ) + sh: fork: Resource temporary unavailable + # + +Even if we migrate to a child cgroup (which doesn't have a set limit), we will +not be able to overcome the most stringent limit in the hierarchy (in this case, +parent's):: + + # echo $$ > /sys/fs/cgroup/pids/parent/child/cgroup.procs + # cat /sys/fs/cgroup/pids/parent/pids.current + 2 + # cat /sys/fs/cgroup/pids/parent/child/pids.current + 2 + # cat /sys/fs/cgroup/pids/parent/child/pids.max + max + # ( /bin/echo "Here's some processes for you." | cat ) + sh: fork: Resource temporary unavailable + # + +We can set a limit that is smaller than pids.current, which will stop any new +processes from being forked at all (note that the shell itself counts towards +pids.current):: + + # echo 1 > /sys/fs/cgroup/pids/parent/pids.max + # /bin/echo "We can't even spawn a single process now." + sh: fork: Resource temporary unavailable + # echo 0 > /sys/fs/cgroup/pids/parent/pids.max + # /bin/echo "We can't even spawn a single process now." + sh: fork: Resource temporary unavailable + # diff --git a/Documentation/admin-guide/cgroup-v1/rdma.rst b/Documentation/admin-guide/cgroup-v1/rdma.rst new file mode 100644 index 000000000000..2fcb0a9bf790 --- /dev/null +++ b/Documentation/admin-guide/cgroup-v1/rdma.rst @@ -0,0 +1,117 @@ +=============== +RDMA Controller +=============== + +.. Contents + + 1. Overview + 1-1. What is RDMA controller? + 1-2. Why RDMA controller needed? + 1-3. How is RDMA controller implemented? + 2. Usage Examples + +1. Overview +=========== + +1-1. What is RDMA controller? +----------------------------- + +RDMA controller allows user to limit RDMA/IB specific resources that a given +set of processes can use. These processes are grouped using RDMA controller. + +RDMA controller defines two resources which can be limited for processes of a +cgroup. + +1-2. Why RDMA controller needed? +-------------------------------- + +Currently user space applications can easily take away all the rdma verb +specific resources such as AH, CQ, QP, MR etc. Due to which other applications +in other cgroup or kernel space ULPs may not even get chance to allocate any +rdma resources. This can lead to service unavailability. + +Therefore RDMA controller is needed through which resource consumption +of processes can be limited. Through this controller different rdma +resources can be accounted. + +1-3. How is RDMA controller implemented? +---------------------------------------- + +RDMA cgroup allows limit configuration of resources. Rdma cgroup maintains +resource accounting per cgroup, per device using resource pool structure. +Each such resource pool is limited up to 64 resources in given resource pool +by rdma cgroup, which can be extended later if required. + +This resource pool object is linked to the cgroup css. Typically there +are 0 to 4 resource pool instances per cgroup, per device in most use cases. +But nothing limits to have it more. At present hundreds of RDMA devices per +single cgroup may not be handled optimally, however there is no +known use case or requirement for such configuration either. + +Since RDMA resources can be allocated from any process and can be freed by any +of the child processes which shares the address space, rdma resources are +always owned by the creator cgroup css. This allows process migration from one +to other cgroup without major complexity of transferring resource ownership; +because such ownership is not really present due to shared nature of +rdma resources. Linking resources around css also ensures that cgroups can be +deleted after processes migrated. This allow progress migration as well with +active resources, even though that is not a primary use case. + +Whenever RDMA resource charging occurs, owner rdma cgroup is returned to +the caller. Same rdma cgroup should be passed while uncharging the resource. +This also allows process migrated with active RDMA resource to charge +to new owner cgroup for new resource. It also allows to uncharge resource of +a process from previously charged cgroup which is migrated to new cgroup, +even though that is not a primary use case. + +Resource pool object is created in following situations. +(a) User sets the limit and no previous resource pool exist for the device +of interest for the cgroup. +(b) No resource limits were configured, but IB/RDMA stack tries to +charge the resource. So that it correctly uncharge them when applications are +running without limits and later on when limits are enforced during uncharging, +otherwise usage count will drop to negative. + +Resource pool is destroyed if all the resource limits are set to max and +it is the last resource getting deallocated. + +User should set all the limit to max value if it intents to remove/unconfigure +the resource pool for a particular device. + +IB stack honors limits enforced by the rdma controller. When application +query about maximum resource limits of IB device, it returns minimum of +what is configured by user for a given cgroup and what is supported by +IB device. + +Following resources can be accounted by rdma controller. + + ========== ============================= + hca_handle Maximum number of HCA Handles + hca_object Maximum number of HCA Objects + ========== ============================= + +2. Usage Examples +================= + +(a) Configure resource limit:: + + echo mlx4_0 hca_handle=2 hca_object=2000 > /sys/fs/cgroup/rdma/1/rdma.max + echo ocrdma1 hca_handle=3 > /sys/fs/cgroup/rdma/2/rdma.max + +(b) Query resource limit:: + + cat /sys/fs/cgroup/rdma/2/rdma.max + #Output: + mlx4_0 hca_handle=2 hca_object=2000 + ocrdma1 hca_handle=3 hca_object=max + +(c) Query current usage:: + + cat /sys/fs/cgroup/rdma/2/rdma.current + #Output: + mlx4_0 hca_handle=1 hca_object=20 + ocrdma1 hca_handle=1 hca_object=23 + +(d) Delete resource limit:: + + echo echo mlx4_0 hca_handle=max hca_object=max > /sys/fs/cgroup/rdma/1/rdma.max diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 080b18ce2a5d..ed4c5977d6e1 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -9,7 +9,7 @@ This is the authoritative documentation on the design, interface and conventions of cgroup v2. It describes all userland-visible aspects of cgroup including core and specific controller behaviors. All future changes must be reflected in this document. Documentation for -v1 is available under Documentation/cgroup-v1/. +v1 is available under Documentation/admin-guide/cgroup-v1/. .. CONTENTS diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst index 1f0d9b939311..a5fdb1a846ce 100644 --- a/Documentation/admin-guide/index.rst +++ b/Documentation/admin-guide/index.rst @@ -59,6 +59,7 @@ configure specific aspects of kernel behavior to your liking. initrd cgroup-v2 + cgroup-v1/index serial-console braille-console parport diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 78576aa45cce..a571a67e0c85 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4089,7 +4089,7 @@ relax_domain_level= [KNL, SMP] Set scheduler's default relax_domain_level. - See Documentation/cgroup-v1/cpusets.rst. + See Documentation/admin-guide/cgroup-v1/cpusets.rst. reserve= [KNL,BUGS] Force kernel to ignore I/O ports or memory Format: ,[,,,...] @@ -4599,7 +4599,7 @@ swapaccount=[0|1] [KNL] Enable accounting of swap in memory resource controller if no parameter or 1 is given or disable - it if 0 is given (See Documentation/cgroup-v1/memory.rst) + it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst) swiotlb= [ARM,IA-64,PPC,MIPS,X86] Format: { | force | noforce } diff --git a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst index 546f174e5d6a..8463f5538fda 100644 --- a/Documentation/admin-guide/mm/numa_memory_policy.rst +++ b/Documentation/admin-guide/mm/numa_memory_policy.rst @@ -15,7 +15,7 @@ document attempts to describe the concepts and APIs of the 2.6 memory policy support. Memory policies should not be confused with cpusets -(``Documentation/cgroup-v1/cpusets.rst``) +(``Documentation/admin-guide/cgroup-v1/cpusets.rst``) which is an administrative mechanism for restricting the nodes from which memory may be allocated by a set of processes. Memory policies are a programming interface that a NUMA-aware application can take advantage of. When diff --git a/Documentation/block/bfq-iosched.rst b/Documentation/block/bfq-iosched.rst index 2c13b2fc1888..0d237d402860 100644 --- a/Documentation/block/bfq-iosched.rst +++ b/Documentation/block/bfq-iosched.rst @@ -547,7 +547,7 @@ As for cgroups-v1 (blkio controller), the exact set of stat files created, and kept up-to-date by bfq, depends on whether CONFIG_BFQ_CGROUP_DEBUG is set. If it is set, then bfq creates all the stat files documented in -Documentation/cgroup-v1/blkio-controller.rst. If, instead, +Documentation/admin-guide/cgroup-v1/blkio-controller.rst. If, instead, CONFIG_BFQ_CGROUP_DEBUG is not set, then bfq creates only the files:: blkio.bfq.io_service_bytes diff --git a/Documentation/cgroup-v1/blkio-controller.rst b/Documentation/cgroup-v1/blkio-controller.rst deleted file mode 100644 index 1d7d962933be..000000000000 --- a/Documentation/cgroup-v1/blkio-controller.rst +++ /dev/null @@ -1,302 +0,0 @@ -=================== -Block IO Controller -=================== - -Overview -======== -cgroup subsys "blkio" implements the block io controller. There seems to be -a need of various kinds of IO control policies (like proportional BW, max BW) -both at leaf nodes as well as at intermediate nodes in a storage hierarchy. -Plan is to use the same cgroup based management interface for blkio controller -and based on user options switch IO policies in the background. - -One IO control policy is throttling policy which can be used to -specify upper IO rate limits on devices. This policy is implemented in -generic block layer and can be used on leaf nodes as well as higher -level logical devices like device mapper. - -HOWTO -===== -Throttling/Upper Limit policy ------------------------------ -- Enable Block IO controller:: - - CONFIG_BLK_CGROUP=y - -- Enable throttling in block layer:: - - CONFIG_BLK_DEV_THROTTLING=y - -- Mount blkio controller (see cgroups.txt, Why are cgroups needed?):: - - mount -t cgroup -o blkio none /sys/fs/cgroup/blkio - -- Specify a bandwidth rate on particular device for root group. The format - for policy is ": ":: - - echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device - - Above will put a limit of 1MB/second on reads happening for root group - on device having major/minor number 8:16. - -- Run dd to read a file and see if rate is throttled to 1MB/s or not:: - - # dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024 - 1024+0 records in - 1024+0 records out - 4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s - - Limits for writes can be put using blkio.throttle.write_bps_device file. - -Hierarchical Cgroups -==================== - -Throttling implements hierarchy support; however, -throttling's hierarchy support is enabled iff "sane_behavior" is -enabled from cgroup side, which currently is a development option and -not publicly available. - -If somebody created a hierarchy like as follows:: - - root - / \ - test1 test2 - | - test3 - -Throttling with "sane_behavior" will handle the -hierarchy correctly. For throttling, all limits apply -to the whole subtree while all statistics are local to the IOs -directly generated by tasks in that cgroup. - -Throttling without "sane_behavior" enabled from cgroup side will -practically treat all groups at same level as if it looks like the -following:: - - pivot - / / \ \ - root test1 test2 test3 - -Various user visible config options -=================================== -CONFIG_BLK_CGROUP - - Block IO controller. - -CONFIG_BFQ_CGROUP_DEBUG - - Debug help. Right now some additional stats file show up in cgroup - if this option is enabled. - -CONFIG_BLK_DEV_THROTTLING - - Enable block device throttling support in block layer. - -Details of cgroup files -======================= -Proportional weight policy files --------------------------------- -- blkio.weight - - Specifies per cgroup weight. This is default weight of the group - on all the devices until and unless overridden by per device rule. - (See blkio.weight_device). - Currently allowed range of weights is from 10 to 1000. - -- blkio.weight_device - - One can specify per cgroup per device rules using this interface. - These rules override the default value of group weight as specified - by blkio.weight. - - Following is the format:: - - # echo dev_maj:dev_minor weight > blkio.weight_device - - Configure weight=300 on /dev/sdb (8:16) in this cgroup:: - - # echo 8:16 300 > blkio.weight_device - # cat blkio.weight_device - dev weight - 8:16 300 - - Configure weight=500 on /dev/sda (8:0) in this cgroup:: - - # echo 8:0 500 > blkio.weight_device - # cat blkio.weight_device - dev weight - 8:0 500 - 8:16 300 - - Remove specific weight for /dev/sda in this cgroup:: - - # echo 8:0 0 > blkio.weight_device - # cat blkio.weight_device - dev weight - 8:16 300 - -- blkio.leaf_weight[_device] - - Equivalents of blkio.weight[_device] for the purpose of - deciding how much weight tasks in the given cgroup has while - competing with the cgroup's child cgroups. For details, - please refer to Documentation/block/cfq-iosched.txt. - -- blkio.time - - disk time allocated to cgroup per device in milliseconds. First - two fields specify the major and minor number of the device and - third field specifies the disk time allocated to group in - milliseconds. - -- blkio.sectors - - number of sectors transferred to/from disk by the group. First - two fields specify the major and minor number of the device and - third field specifies the number of sectors transferred by the - group to/from the device. - -- blkio.io_service_bytes - - Number of bytes transferred to/from the disk by the group. These - are further divided by the type of operation - read or write, sync - or async. First two fields specify the major and minor number of the - device, third field specifies the operation type and the fourth field - specifies the number of bytes. - -- blkio.io_serviced - - Number of IOs (bio) issued to the disk by the group. These - are further divided by the type of operation - read or write, sync - or async. First two fields specify the major and minor number of the - device, third field specifies the operation type and the fourth field - specifies the number of IOs. - -- blkio.io_service_time - - Total amount of time between request dispatch and request completion - for the IOs done by this cgroup. This is in nanoseconds to make it - meaningful for flash devices too. For devices with queue depth of 1, - this time represents the actual service time. When queue_depth > 1, - that is no longer true as requests may be served out of order. This - may cause the service time for a given IO to include the service time - of multiple IOs when served out of order which may result in total - io_service_time > actual time elapsed. This time is further divided by - the type of operation - read or write, sync or async. First two fields - specify the major and minor number of the device, third field - specifies the operation type and the fourth field specifies the - io_service_time in ns. - -- blkio.io_wait_time - - Total amount of time the IOs for this cgroup spent waiting in the - scheduler queues for service. This can be greater than the total time - elapsed since it is cumulative io_wait_time for all IOs. It is not a - measure of total time the cgroup spent waiting but rather a measure of - the wait_time for its individual IOs. For devices with queue_depth > 1 - this metric does not include the time spent waiting for service once - the IO is dispatched to the device but till it actually gets serviced - (there might be a time lag here due to re-ordering of requests by the - device). This is in nanoseconds to make it meaningful for flash - devices too. This time is further divided by the type of operation - - read or write, sync or async. First two fields specify the major and - minor number of the device, third field specifies the operation type - and the fourth field specifies the io_wait_time in ns. - -- blkio.io_merged - - Total number of bios/requests merged into requests belonging to this - cgroup. This is further divided by the type of operation - read or - write, sync or async. - -- blkio.io_queued - - Total number of requests queued up at any given instant for this - cgroup. This is further divided by the type of operation - read or - write, sync or async. - -- blkio.avg_queue_size - - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. - The average queue size for this cgroup over the entire time of this - cgroup's existence. Queue size samples are taken each time one of the - queues of this cgroup gets a timeslice. - -- blkio.group_wait_time - - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. - This is the amount of time the cgroup had to wait since it became busy - (i.e., went from 0 to 1 request queued) to get a timeslice for one of - its queues. This is different from the io_wait_time which is the - cumulative total of the amount of time spent by each IO in that cgroup - waiting in the scheduler queue. This is in nanoseconds. If this is - read when the cgroup is in a waiting (for timeslice) state, the stat - will only report the group_wait_time accumulated till the last time it - got a timeslice and will not include the current delta. - -- blkio.empty_time - - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. - This is the amount of time a cgroup spends without any pending - requests when not being served, i.e., it does not include any time - spent idling for one of the queues of the cgroup. This is in - nanoseconds. If this is read when the cgroup is in an empty state, - the stat will only report the empty_time accumulated till the last - time it had a pending request and will not include the current delta. - -- blkio.idle_time - - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. - This is the amount of time spent by the IO scheduler idling for a - given cgroup in anticipation of a better request than the existing ones - from other queues/cgroups. This is in nanoseconds. If this is read - when the cgroup is in an idling state, the stat will only report the - idle_time accumulated till the last idle period and will not include - the current delta. - -- blkio.dequeue - - Debugging aid only enabled if CONFIG_BFQ_CGROUP_DEBUG=y. This - gives the statistics about how many a times a group was dequeued - from service tree of the device. First two fields specify the major - and minor number of the device and third field specifies the number - of times a group was dequeued from a particular device. - -- blkio.*_recursive - - Recursive version of various stats. These files show the - same information as their non-recursive counterparts but - include stats from all the descendant cgroups. - -Throttling/Upper limit policy files ------------------------------------ -- blkio.throttle.read_bps_device - - Specifies upper limit on READ rate from the device. IO rate is - specified in bytes per second. Rules are per device. Following is - the format:: - - echo ": " > /cgrp/blkio.throttle.read_bps_device - -- blkio.throttle.write_bps_device - - Specifies upper limit on WRITE rate to the device. IO rate is - specified in bytes per second. Rules are per device. Following is - the format:: - - echo ": " > /cgrp/blkio.throttle.write_bps_device - -- blkio.throttle.read_iops_device - - Specifies upper limit on READ rate from the device. IO rate is - specified in IO per second. Rules are per device. Following is - the format:: - - echo ": " > /cgrp/blkio.throttle.read_iops_device - -- blkio.throttle.write_iops_device - - Specifies upper limit on WRITE rate to the device. IO rate is - specified in io per second. Rules are per device. Following is - the format:: - - echo ": " > /cgrp/blkio.throttle.write_iops_device - -Note: If both BW and IOPS rules are specified for a device, then IO is - subjected to both the constraints. - -- blkio.throttle.io_serviced - - Number of IOs (bio) issued to the disk by the group. These - are further divided by the type of operation - read or write, sync - or async. First two fields specify the major and minor number of the - device, third field specifies the operation type and the fourth field - specifies the number of IOs. - -- blkio.throttle.io_service_bytes - - Number of bytes transferred to/from the disk by the group. These - are further divided by the type of operation - read or write, sync - or async. First two fields specify the major and minor number of the - device, third field specifies the operation type and the fourth field - specifies the number of bytes. - -Common files among various policies ------------------------------------ -- blkio.reset_stats - - Writing an int to this file will result in resetting all the stats - for that cgroup. diff --git a/Documentation/cgroup-v1/cgroups.rst b/Documentation/cgroup-v1/cgroups.rst deleted file mode 100644 index 46bbe7e022d4..000000000000 --- a/Documentation/cgroup-v1/cgroups.rst +++ /dev/null @@ -1,695 +0,0 @@ -============== -Control Groups -============== - -Written by Paul Menage based on -Documentation/cgroup-v1/cpusets.rst - -Original copyright statements from cpusets.txt: - -Portions Copyright (C) 2004 BULL SA. - -Portions Copyright (c) 2004-2006 Silicon Graphics, Inc. - -Modified by Paul Jackson - -Modified by Christoph Lameter - -.. CONTENTS: - - 1. Control Groups - 1.1 What are cgroups ? - 1.2 Why are cgroups needed ? - 1.3 How are cgroups implemented ? - 1.4 What does notify_on_release do ? - 1.5 What does clone_children do ? - 1.6 How do I use cgroups ? - 2. Usage Examples and Syntax - 2.1 Basic Usage - 2.2 Attaching processes - 2.3 Mounting hierarchies by name - 3. Kernel API - 3.1 Overview - 3.2 Synchronization - 3.3 Subsystem API - 4. Extended attributes usage - 5. Questions - -1. Control Groups -================= - -1.1 What are cgroups ? ----------------------- - -Control Groups provide a mechanism for aggregating/partitioning sets of -tasks, and all their future children, into hierarchical groups with -specialized behaviour. - -Definitions: - -A *cgroup* associates a set of tasks with a set of parameters for one -or more subsystems. - -A *subsystem* is a module that makes use of the task grouping -facilities provided by cgroups to treat groups of tasks in -particular ways. A subsystem is typically a "resource controller" that -schedules a resource or applies per-cgroup limits, but it may be -anything that wants to act on a group of processes, e.g. a -virtualization subsystem. - -A *hierarchy* is a set of cgroups arranged in a tree, such that -every task in the system is in exactly one of the cgroups in the -hierarchy, and a set of subsystems; each subsystem has system-specific -state attached to each cgroup in the hierarchy. Each hierarchy has -an instance of the cgroup virtual filesystem associated with it. - -At any one time there may be multiple active hierarchies of task -cgroups. Each hierarchy is a partition of all tasks in the system. - -User-level code may create and destroy cgroups by name in an -instance of the cgroup virtual file system, specify and query to -which cgroup a task is assigned, and list the task PIDs assigned to -a cgroup. Those creations and assignments only affect the hierarchy -associated with that instance of the cgroup file system. - -On their own, the only use for cgroups is for simple job -tracking. The intention is that other subsystems hook into the generic -cgroup support to provide new attributes for cgroups, such as -accounting/limiting the resources which processes in a cgroup can -access. For example, cpusets (see Documentation/cgroup-v1/cpusets.rst) allow -you to associate a set of CPUs and a set of memory nodes with the -tasks in each cgroup. - -1.2 Why are cgroups needed ? ----------------------------- - -There are multiple efforts to provide process aggregations in the -Linux kernel, mainly for resource-tracking purposes. Such efforts -include cpusets, CKRM/ResGroups, UserBeanCounters, and virtual server -namespaces. These all require the basic notion of a -grouping/partitioning of processes, with newly forked processes ending -up in the same group (cgroup) as their parent process. - -The kernel cgroup patch provides the minimum essential kernel -mechanisms required to efficiently implement such groups. It has -minimal impact on the system fast paths, and provides hooks for -specific subsystems such as cpusets to provide additional behaviour as -desired. - -Multiple hierarchy support is provided to allow for situations where -the division of tasks into cgroups is distinctly different for -different subsystems - having parallel hierarchies allows each -hierarchy to be a natural division of tasks, without having to handle -complex combinations of tasks that would be present if several -unrelated subsystems needed to be forced into the same tree of -cgroups. - -At one extreme, each resource controller or subsystem could be in a -separate hierarchy; at the other extreme, all subsystems -would be attached to the same hierarchy. - -As an example of a scenario (originally proposed by vatsa@in.ibm.com) -that can benefit from multiple hierarchies, consider a large -university server with various users - students, professors, system -tasks etc. The resource planning for this server could be along the -following lines:: - - CPU : "Top cpuset" - / \ - CPUSet1 CPUSet2 - | | - (Professors) (Students) - - In addition (system tasks) are attached to topcpuset (so - that they can run anywhere) with a limit of 20% - - Memory : Professors (50%), Students (30%), system (20%) - - Disk : Professors (50%), Students (30%), system (20%) - - Network : WWW browsing (20%), Network File System (60%), others (20%) - / \ - Professors (15%) students (5%) - -Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd goes -into the NFS network class. - -At the same time Firefox/Lynx will share an appropriate CPU/Memory class -depending on who launched it (prof/student). - -With the ability to classify tasks differently for different resources -(by putting those resource subsystems in different hierarchies), -the admin can easily set up a script which receives exec notifications -and depending on who is launching the browser he can:: - - # echo browser_pid > /sys/fs/cgroup///tasks - -With only a single hierarchy, he now would potentially have to create -a separate cgroup for every browser launched and associate it with -appropriate network and other resource class. This may lead to -proliferation of such cgroups. - -Also let's say that the administrator would like to give enhanced network -access temporarily to a student's browser (since it is night and the user -wants to do online gaming :)) OR give one of the student's simulation -apps enhanced CPU power. - -With ability to write PIDs directly to resource classes, it's just a -matter of:: - - # echo pid > /sys/fs/cgroup/network//tasks - (after some time) - # echo pid > /sys/fs/cgroup/network//tasks - -Without this ability, the administrator would have to split the cgroup into -multiple separate ones and then associate the new cgroups with the -new resource classes. - - - -1.3 How are cgroups implemented ? ---------------------------------- - -Control Groups extends the kernel as follows: - - - Each task in the system has a reference-counted pointer to a - css_set. - - - A css_set contains a set of reference-counted pointers to - cgroup_subsys_state objects, one for each cgroup subsystem - registered in the system. There is no direct link from a task to - the cgroup of which it's a member in each hierarchy, but this - can be determined by following pointers through the - cgroup_subsys_state objects. This is because accessing the - subsystem state is something that's expected to happen frequently - and in performance-critical code, whereas operations that require a - task's actual cgroup assignments (in particular, moving between - cgroups) are less common. A linked list runs through the cg_list - field of each task_struct using the css_set, anchored at - css_set->tasks. - - - A cgroup hierarchy filesystem can be mounted for browsing and - manipulation from user space. - - - You can list all the tasks (by PID) attached to any cgroup. - -The implementation of cgroups requires a few, simple hooks -into the rest of the kernel, none in performance-critical paths: - - - in init/main.c, to initialize the root cgroups and initial - css_set at system boot. - - - in fork and exit, to attach and detach a task from its css_set. - -In addition, a new file system of type "cgroup" may be mounted, to -enable browsing and modifying the cgroups presently known to the -kernel. When mounting a cgroup hierarchy, you may specify a -comma-separated list of subsystems to mount as the filesystem mount -options. By default, mounting the cgroup filesystem attempts to -mount a hierarchy containing all registered subsystems. - -If an active hierarchy with exactly the same set of subsystems already -exists, it will be reused for the new mount. If no existing hierarchy -matches, and any of the requested subsystems are in use in an existing -hierarchy, the mount will fail with -EBUSY. Otherwise, a new hierarchy -is activated, associated with the requested subsystems. - -It's not currently possible to bind a new subsystem to an active -cgroup hierarchy, or to unbind a subsystem from an active cgroup -hierarchy. This may be possible in future, but is fraught with nasty -error-recovery issues. - -When a cgroup filesystem is unmounted, if there are any -child cgroups created below the top-level cgroup, that hierarchy -will remain active even though unmounted; if there are no -child cgroups then the hierarchy will be deactivated. - -No new system calls are added for cgroups - all support for -querying and modifying cgroups is via this cgroup file system. - -Each task under /proc has an added file named 'cgroup' displaying, -for each active hierarchy, the subsystem names and the cgroup name -as the path relative to the root of the cgroup file system. - -Each cgroup is represented by a directory in the cgroup file system -containing the following files describing that cgroup: - - - tasks: list of tasks (by PID) attached to that cgroup. This list - is not guaranteed to be sorted. Writing a thread ID into this file - moves the thread into this cgroup. - - cgroup.procs: list of thread group IDs in the cgroup. This list is - not guaranteed to be sorted or free of duplicate TGIDs, and userspace - should sort/uniquify the list if this property is required. - Writing a thread group ID into this file moves all threads in that - group into this cgroup. - - notify_on_release flag: run the release agent on exit? - - release_agent: the path to use for release notifications (this file - exists in the top cgroup only) - -Other subsystems such as cpusets may add additional files in each -cgroup dir. - -New cgroups are created using the mkdir system call or shell -command. The properties of a cgroup, such as its flags, are -modified by writing to the appropriate file in that cgroups -directory, as listed above. - -The named hierarchical structure of nested cgroups allows partitioning -a large system into nested, dynamically changeable, "soft-partitions". - -The attachment of each task, automatically inherited at fork by any -children of that task, to a cgroup allows organizing the work load -on a system into related sets of tasks. A task may be re-attached to -any other cgroup, if allowed by the permissions on the necessary -cgroup file system directories. - -When a task is moved from one cgroup to another, it gets a new -css_set pointer - if there's an already existing css_set with the -desired collection of cgroups then that group is reused, otherwise a new -css_set is allocated. The appropriate existing css_set is located by -looking into a hash table. - -To allow access from a cgroup to the css_sets (and hence tasks) -that comprise it, a set of cg_cgroup_link objects form a lattice; -each cg_cgroup_link is linked into a list of cg_cgroup_links for -a single cgroup on its cgrp_link_list field, and a list of -cg_cgroup_links for a single css_set on its cg_link_list. - -Thus the set of tasks in a cgroup can be listed by iterating over -each css_set that references the cgroup, and sub-iterating over -each css_set's task set. - -The use of a Linux virtual file system (vfs) to represent the -cgroup hierarchy provides for a familiar permission and name space -for cgroups, with a minimum of additional kernel code. - -1.4 What does notify_on_release do ? ------------------------------------- - -If the notify_on_release flag is enabled (1) in a cgroup, then -whenever the last task in the cgroup leaves (exits or attaches to -some other cgroup) and the last child cgroup of that cgroup -is removed, then the kernel runs the command specified by the contents -of the "release_agent" file in that hierarchy's root directory, -supplying the pathname (relative to the mount point of the cgroup -file system) of the abandoned cgroup. This enables automatic -removal of abandoned cgroups. The default value of -notify_on_release in the root cgroup at system boot is disabled -(0). The default value of other cgroups at creation is the current -value of their parents' notify_on_release settings. The default value of -a cgroup hierarchy's release_agent path is empty. - -1.5 What does clone_children do ? ---------------------------------- - -This flag only affects the cpuset controller. If the clone_children -flag is enabled (1) in a cgroup, a new cpuset cgroup will copy its -configuration from the parent during initialization. - -1.6 How do I use cgroups ? --------------------------- - -To start a new job that is to be contained within a cgroup, using -the "cpuset" cgroup subsystem, the steps are something like:: - - 1) mount -t tmpfs cgroup_root /sys/fs/cgroup - 2) mkdir /sys/fs/cgroup/cpuset - 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset - 4) Create the new cgroup by doing mkdir's and write's (or echo's) in - the /sys/fs/cgroup/cpuset virtual file system. - 5) Start a task that will be the "founding father" of the new job. - 6) Attach that task to the new cgroup by writing its PID to the - /sys/fs/cgroup/cpuset tasks file for that cgroup. - 7) fork, exec or clone the job tasks from this founding father task. - -For example, the following sequence of commands will setup a cgroup -named "Charlie", containing just CPUs 2 and 3, and Memory Node 1, -and then start a subshell 'sh' in that cgroup:: - - mount -t tmpfs cgroup_root /sys/fs/cgroup - mkdir /sys/fs/cgroup/cpuset - mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset - cd /sys/fs/cgroup/cpuset - mkdir Charlie - cd Charlie - /bin/echo 2-3 > cpuset.cpus - /bin/echo 1 > cpuset.mems - /bin/echo $$ > tasks - sh - # The subshell 'sh' is now running in cgroup Charlie - # The next line should display '/Charlie' - cat /proc/self/cgroup - -2. Usage Examples and Syntax -============================ - -2.1 Basic Usage ---------------- - -Creating, modifying, using cgroups can be done through the cgroup -virtual filesystem. - -To mount a cgroup hierarchy with all available subsystems, type:: - - # mount -t cgroup xxx /sys/fs/cgroup - -The "xxx" is not interpreted by the cgroup code, but will appear in -/proc/mounts so may be any useful identifying string that you like. - -Note: Some subsystems do not work without some user input first. For instance, -if cpusets are enabled the user will have to populate the cpus and mems files -for each new cgroup created before that group can be used. - -As explained in section `1.2 Why are cgroups needed?` you should create -different hierarchies of cgroups for each single resource or group of -resources you want to control. Therefore, you should mount a tmpfs on -/sys/fs/cgroup and create directories for each cgroup resource or resource -group:: - - # mount -t tmpfs cgroup_root /sys/fs/cgroup - # mkdir /sys/fs/cgroup/rg1 - -To mount a cgroup hierarchy with just the cpuset and memory -subsystems, type:: - - # mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1 - -While remounting cgroups is currently supported, it is not recommend -to use it. Remounting allows changing bound subsystems and -release_agent. Rebinding is hardly useful as it only works when the -hierarchy is empty and release_agent itself should be replaced with -conventional fsnotify. The support for remounting will be removed in -the future. - -To Specify a hierarchy's release_agent:: - - # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \ - xxx /sys/fs/cgroup/rg1 - -Note that specifying 'release_agent' more than once will return failure. - -Note that changing the set of subsystems is currently only supported -when the hierarchy consists of a single (root) cgroup. Supporting -the ability to arbitrarily bind/unbind subsystems from an existing -cgroup hierarchy is intended to be implemented in the future. - -Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the -tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1 -is the cgroup that holds the whole system. - -If you want to change the value of release_agent:: - - # echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent - -It can also be changed via remount. - -If you want to create a new cgroup under /sys/fs/cgroup/rg1:: - - # cd /sys/fs/cgroup/rg1 - # mkdir my_cgroup - -Now you want to do something with this cgroup: - - # cd my_cgroup - -In this directory you can find several files:: - - # ls - cgroup.procs notify_on_release tasks - (plus whatever files added by the attached subsystems) - -Now attach your shell to this cgroup:: - - # /bin/echo $$ > tasks - -You can also create cgroups inside your cgroup by using mkdir in this -directory:: - - # mkdir my_sub_cs - -To remove a cgroup, just use rmdir:: - - # rmdir my_sub_cs - -This will fail if the cgroup is in use (has cgroups inside, or -has processes attached, or is held alive by other subsystem-specific -reference). - -2.2 Attaching processes ------------------------ - -:: - - # /bin/echo PID > tasks - -Note that it is PID, not PIDs. You can only attach ONE task at a time. -If you have several tasks to attach, you have to do it one after another:: - - # /bin/echo PID1 > tasks - # /bin/echo PID2 > tasks - ... - # /bin/echo PIDn > tasks - -You can attach the current shell task by echoing 0:: - - # echo 0 > tasks - -You can use the cgroup.procs file instead of the tasks file to move all -threads in a threadgroup at once. Echoing the PID of any task in a -threadgroup to cgroup.procs causes all tasks in that threadgroup to be -attached to the cgroup. Writing 0 to cgroup.procs moves all tasks -in the writing task's threadgroup. - -Note: Since every task is always a member of exactly one cgroup in each -mounted hierarchy, to remove a task from its current cgroup you must -move it into a new cgroup (possibly the root cgroup) by writing to the -new cgroup's tasks file. - -Note: Due to some restrictions enforced by some cgroup subsystems, moving -a process to another cgroup can fail. - -2.3 Mounting hierarchies by name --------------------------------- - -Passing the name= option when mounting a cgroups hierarchy -associates the given name with the hierarchy. This can be used when -mounting a pre-existing hierarchy, in order to refer to it by name -rather than by its set of active subsystems. Each hierarchy is either -nameless, or has a unique name. - -The name should match [\w.-]+ - -When passing a name= option for a new hierarchy, you need to -specify subsystems manually; the legacy behaviour of mounting all -subsystems when none are explicitly specified is not supported when -you give a subsystem a name. - -The name of the subsystem appears as part of the hierarchy description -in /proc/mounts and /proc//cgroups. - - -3. Kernel API -============= - -3.1 Overview ------------- - -Each kernel subsystem that wants to hook into the generic cgroup -system needs to create a cgroup_subsys object. This contains -various methods, which are callbacks from the cgroup system, along -with a subsystem ID which will be assigned by the cgroup system. - -Other fields in the cgroup_subsys object include: - -- subsys_id: a unique array index for the subsystem, indicating which - entry in cgroup->subsys[] this subsystem should be managing. - -- name: should be initialized to a unique subsystem name. Should be - no longer than MAX_CGROUP_TYPE_NAMELEN. - -- early_init: indicate if the subsystem needs early initialization - at system boot. - -Each cgroup object created by the system has an array of pointers, -indexed by subsystem ID; this pointer is entirely managed by the -subsystem; the generic cgroup code will never touch this pointer. - -3.2 Synchronization -------------------- - -There is a global mutex, cgroup_mutex, used by the cgroup -system. This should be taken by anything that wants to modify a -cgroup. It may also be taken to prevent cgroups from being -modified, but more specific locks may be more appropriate in that -situation. - -See kernel/cgroup.c for more details. - -Subsystems can take/release the cgroup_mutex via the functions -cgroup_lock()/cgroup_unlock(). - -Accessing a task's cgroup pointer may be done in the following ways: -- while holding cgroup_mutex -- while holding the task's alloc_lock (via task_lock()) -- inside an rcu_read_lock() section via rcu_dereference() - -3.3 Subsystem API ------------------ - -Each subsystem should: - -- add an entry in linux/cgroup_subsys.h -- define a cgroup_subsys object called _cgrp_subsys - -Each subsystem may export the following methods. The only mandatory -methods are css_alloc/free. Any others that are null are presumed to -be successful no-ops. - -``struct cgroup_subsys_state *css_alloc(struct cgroup *cgrp)`` -(cgroup_mutex held by caller) - -Called to allocate a subsystem state object for a cgroup. The -subsystem should allocate its subsystem state object for the passed -cgroup, returning a pointer to the new object on success or a -ERR_PTR() value. On success, the subsystem pointer should point to -a structure of type cgroup_subsys_state (typically embedded in a -larger subsystem-specific object), which will be initialized by the -cgroup system. Note that this will be called at initialization to -create the root subsystem state for this subsystem; this case can be -identified by the passed cgroup object having a NULL parent (since -it's the root of the hierarchy) and may be an appropriate place for -initialization code. - -``int css_online(struct cgroup *cgrp)`` -(cgroup_mutex held by caller) - -Called after @cgrp successfully completed all allocations and made -visible to cgroup_for_each_child/descendant_*() iterators. The -subsystem may choose to fail creation by returning -errno. This -callback can be used to implement reliable state sharing and -propagation along the hierarchy. See the comment on -cgroup_for_each_descendant_pre() for details. - -``void css_offline(struct cgroup *cgrp);`` -(cgroup_mutex held by caller) - -This is the counterpart of css_online() and called iff css_online() -has succeeded on @cgrp. This signifies the beginning of the end of -@cgrp. @cgrp is being removed and the subsystem should start dropping -all references it's holding on @cgrp. When all references are dropped, -cgroup removal will proceed to the next step - css_free(). After this -callback, @cgrp should be considered dead to the subsystem. - -``void css_free(struct cgroup *cgrp)`` -(cgroup_mutex held by caller) - -The cgroup system is about to free @cgrp; the subsystem should free -its subsystem state object. By the time this method is called, @cgrp -is completely unused; @cgrp->parent is still valid. (Note - can also -be called for a newly-created cgroup if an error occurs after this -subsystem's create() method has been called for the new cgroup). - -``int can_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)`` -(cgroup_mutex held by caller) - -Called prior to moving one or more tasks into a cgroup; if the -subsystem returns an error, this will abort the attach operation. -@tset contains the tasks to be attached and is guaranteed to have at -least one task in it. - -If there are multiple tasks in the taskset, then: - - it's guaranteed that all are from the same thread group - - @tset contains all tasks from the thread group whether or not - they're switching cgroups - - the first task is the leader - -Each @tset entry also contains the task's old cgroup and tasks which -aren't switching cgroup can be skipped easily using the -cgroup_taskset_for_each() iterator. Note that this isn't called on a -fork. If this method returns 0 (success) then this should remain valid -while the caller holds cgroup_mutex and it is ensured that either -attach() or cancel_attach() will be called in future. - -``void css_reset(struct cgroup_subsys_state *css)`` -(cgroup_mutex held by caller) - -An optional operation which should restore @css's configuration to the -initial state. This is currently only used on the unified hierarchy -when a subsystem is disabled on a cgroup through -"cgroup.subtree_control" but should remain enabled because other -subsystems depend on it. cgroup core makes such a css invisible by -removing the associated interface files and invokes this callback so -that the hidden subsystem can return to the initial neutral state. -This prevents unexpected resource control from a hidden css and -ensures that the configuration is in the initial state when it is made -visible again later. - -``void cancel_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)`` -(cgroup_mutex held by caller) - -Called when a task attach operation has failed after can_attach() has succeeded. -A subsystem whose can_attach() has some side-effects should provide this -function, so that the subsystem can implement a rollback. If not, not necessary. -This will be called only about subsystems whose can_attach() operation have -succeeded. The parameters are identical to can_attach(). - -``void attach(struct cgroup *cgrp, struct cgroup_taskset *tset)`` -(cgroup_mutex held by caller) - -Called after the task has been attached to the cgroup, to allow any -post-attachment activity that requires memory allocations or blocking. -The parameters are identical to can_attach(). - -``void fork(struct task_struct *task)`` - -Called when a task is forked into a cgroup. - -``void exit(struct task_struct *task)`` - -Called during task exit. - -``void free(struct task_struct *task)`` - -Called when the task_struct is freed. - -``void bind(struct cgroup *root)`` -(cgroup_mutex held by caller) - -Called when a cgroup subsystem is rebound to a different hierarchy -and root cgroup. Currently this will only involve movement between -the default hierarchy (which never has sub-cgroups) and a hierarchy -that is being created/destroyed (and hence has no sub-cgroups). - -4. Extended attribute usage -=========================== - -cgroup filesystem supports certain types of extended attributes in its -directories and files. The current supported types are: - - - Trusted (XATTR_TRUSTED) - - Security (XATTR_SECURITY) - -Both require CAP_SYS_ADMIN capability to set. - -Like in tmpfs, the extended attributes in cgroup filesystem are stored -using kernel memory and it's advised to keep the usage at minimum. This -is the reason why user defined extended attributes are not supported, since -any user can do it and there's no limit in the value size. - -The current known users for this feature are SELinux to limit cgroup usage -in containers and systemd for assorted meta data like main PID in a cgroup -(systemd creates a cgroup per service). - -5. Questions -============ - -:: - - Q: what's up with this '/bin/echo' ? - A: bash's builtin 'echo' command does not check calls to write() against - errors. If you use it in the cgroup file system, you won't be - able to tell whether a command succeeded or failed. - - Q: When I attach processes, only the first of the line gets really attached ! - A: We can only return one error code per call to write(). So you should also - put only ONE PID. diff --git a/Documentation/cgroup-v1/cpuacct.rst b/Documentation/cgroup-v1/cpuacct.rst deleted file mode 100644 index d30ed81d2ad7..000000000000 --- a/Documentation/cgroup-v1/cpuacct.rst +++ /dev/null @@ -1,50 +0,0 @@ -========================= -CPU Accounting Controller -========================= - -The CPU accounting controller is used to group tasks using cgroups and -account the CPU usage of these groups of tasks. - -The CPU accounting controller supports multi-hierarchy groups. An accounting -group accumulates the CPU usage of all of its child groups and the tasks -directly present in its group. - -Accounting groups can be created by first mounting the cgroup filesystem:: - - # mount -t cgroup -ocpuacct none /sys/fs/cgroup - -With the above step, the initial or the parent accounting group becomes -visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in -the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup. -/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained -by this group which is essentially the CPU time obtained by all the tasks -in the system. - -New accounting groups can be created under the parent group /sys/fs/cgroup:: - - # cd /sys/fs/cgroup - # mkdir g1 - # echo $$ > g1/tasks - -The above steps create a new group g1 and move the current shell -process (bash) into it. CPU time consumed by this bash and its children -can be obtained from g1/cpuacct.usage and the same is accumulated in -/sys/fs/cgroup/cpuacct.usage also. - -cpuacct.stat file lists a few statistics which further divide the -CPU time obtained by the cgroup into user and system times. Currently -the following statistics are supported: - -user: Time spent by tasks of the cgroup in user mode. -system: Time spent by tasks of the cgroup in kernel mode. - -user and system are in USER_HZ unit. - -cpuacct controller uses percpu_counter interface to collect user and -system times. This has two side effects: - -- It is theoretically possible to see wrong values for user and system times. - This is because percpu_counter_read() on 32bit systems isn't safe - against concurrent writes. -- It is possible to see slightly outdated values for user and system times - due to the batch processing nature of percpu_counter. diff --git a/Documentation/cgroup-v1/cpusets.rst b/Documentation/cgroup-v1/cpusets.rst deleted file mode 100644 index b6a42cdea72b..000000000000 --- a/Documentation/cgroup-v1/cpusets.rst +++ /dev/null @@ -1,866 +0,0 @@ -======= -CPUSETS -======= - -Copyright (C) 2004 BULL SA. - -Written by Simon.Derr@bull.net - -- Portions Copyright (c) 2004-2006 Silicon Graphics, Inc. -- Modified by Paul Jackson -- Modified by Christoph Lameter -- Modified by Paul Menage -- Modified by Hidetoshi Seto - -.. CONTENTS: - - 1. Cpusets - 1.1 What are cpusets ? - 1.2 Why are cpusets needed ? - 1.3 How are cpusets implemented ? - 1.4 What are exclusive cpusets ? - 1.5 What is memory_pressure ? - 1.6 What is memory spread ? - 1.7 What is sched_load_balance ? - 1.8 What is sched_relax_domain_level ? - 1.9 How do I use cpusets ? - 2. Usage Examples and Syntax - 2.1 Basic Usage - 2.2 Adding/removing cpus - 2.3 Setting flags - 2.4 Attaching processes - 3. Questions - 4. Contact - -1. Cpusets -========== - -1.1 What are cpusets ? ----------------------- - -Cpusets provide a mechanism for assigning a set of CPUs and Memory -Nodes to a set of tasks. In this document "Memory Node" refers to -an on-line node that contains memory. - -Cpusets constrain the CPU and Memory placement of tasks to only -the resources within a task's current cpuset. They form a nested -hierarchy visible in a virtual file system. These are the essential -hooks, beyond what is already present, required to manage dynamic -job placement on large systems. - -Cpusets use the generic cgroup subsystem described in -Documentation/cgroup-v1/cgroups.rst. - -Requests by a task, using the sched_setaffinity(2) system call to -include CPUs in its CPU affinity mask, and using the mbind(2) and -set_mempolicy(2) system calls to include Memory Nodes in its memory -policy, are both filtered through that task's cpuset, filtering out any -CPUs or Memory Nodes not in that cpuset. The scheduler will not -schedule a task on a CPU that is not allowed in its cpus_allowed -vector, and the kernel page allocator will not allocate a page on a -node that is not allowed in the requesting task's mems_allowed vector. - -User level code may create and destroy cpusets by name in the cgroup -virtual file system, manage the attributes and permissions of these -cpusets and which CPUs and Memory Nodes are assigned to each cpuset, -specify and query to which cpuset a task is assigned, and list the -task pids assigned to a cpuset. - - -1.2 Why are cpusets needed ? ----------------------------- - -The management of large computer systems, with many processors (CPUs), -complex memory cache hierarchies and multiple Memory Nodes having -non-uniform access times (NUMA) presents additional challenges for -the efficient scheduling and memory placement of processes. - -Frequently more modest sized systems can be operated with adequate -efficiency just by letting the operating system automatically share -the available CPU and Memory resources amongst the requesting tasks. - -But larger systems, which benefit more from careful processor and -memory placement to reduce memory access times and contention, -and which typically represent a larger investment for the customer, -can benefit from explicitly placing jobs on properly sized subsets of -the system. - -This can be especially valuable on: - - * Web Servers running multiple instances of the same web application, - * Servers running different applications (for instance, a web server - and a database), or - * NUMA systems running large HPC applications with demanding - performance characteristics. - -These subsets, or "soft partitions" must be able to be dynamically -adjusted, as the job mix changes, without impacting other concurrently -executing jobs. The location of the running jobs pages may also be moved -when the memory locations are changed. - -The kernel cpuset patch provides the minimum essential kernel -mechanisms required to efficiently implement such subsets. It -leverages existing CPU and Memory Placement facilities in the Linux -kernel to avoid any additional impact on the critical scheduler or -memory allocator code. - - -1.3 How are cpusets implemented ? ---------------------------------- - -Cpusets provide a Linux kernel mechanism to constrain which CPUs and -Memory Nodes are used by a process or set of processes. - -The Linux kernel already has a pair of mechanisms to specify on which -CPUs a task may be scheduled (sched_setaffinity) and on which Memory -Nodes it may obtain memory (mbind, set_mempolicy). - -Cpusets extends these two mechanisms as follows: - - - Cpusets are sets of allowed CPUs and Memory Nodes, known to the - kernel. - - Each task in the system is attached to a cpuset, via a pointer - in the task structure to a reference counted cgroup structure. - - Calls to sched_setaffinity are filtered to just those CPUs - allowed in that task's cpuset. - - Calls to mbind and set_mempolicy are filtered to just - those Memory Nodes allowed in that task's cpuset. - - The root cpuset contains all the systems CPUs and Memory - Nodes. - - For any cpuset, one can define child cpusets containing a subset - of the parents CPU and Memory Node resources. - - The hierarchy of cpusets can be mounted at /dev/cpuset, for - browsing and manipulation from user space. - - A cpuset may be marked exclusive, which ensures that no other - cpuset (except direct ancestors and descendants) may contain - any overlapping CPUs or Memory Nodes. - - You can list all the tasks (by pid) attached to any cpuset. - -The implementation of cpusets requires a few, simple hooks -into the rest of the kernel, none in performance critical paths: - - - in init/main.c, to initialize the root cpuset at system boot. - - in fork and exit, to attach and detach a task from its cpuset. - - in sched_setaffinity, to mask the requested CPUs by what's - allowed in that task's cpuset. - - in sched.c migrate_live_tasks(), to keep migrating tasks within - the CPUs allowed by their cpuset, if possible. - - in the mbind and set_mempolicy system calls, to mask the requested - Memory Nodes by what's allowed in that task's cpuset. - - in page_alloc.c, to restrict memory to allowed nodes. - - in vmscan.c, to restrict page recovery to the current cpuset. - -You should mount the "cgroup" filesystem type in order to enable -browsing and modifying the cpusets presently known to the kernel. No -new system calls are added for cpusets - all support for querying and -modifying cpusets is via this cpuset file system. - -The /proc//status file for each task has four added lines, -displaying the task's cpus_allowed (on which CPUs it may be scheduled) -and mems_allowed (on which Memory Nodes it may obtain memory), -in the two formats seen in the following example:: - - Cpus_allowed: ffffffff,ffffffff,ffffffff,ffffffff - Cpus_allowed_list: 0-127 - Mems_allowed: ffffffff,ffffffff - Mems_allowed_list: 0-63 - -Each cpuset is represented by a directory in the cgroup file system -containing (on top of the standard cgroup files) the following -files describing that cpuset: - - - cpuset.cpus: list of CPUs in that cpuset - - cpuset.mems: list of Memory Nodes in that cpuset - - cpuset.memory_migrate flag: if set, move pages to cpusets nodes - - cpuset.cpu_exclusive flag: is cpu placement exclusive? - - cpuset.mem_exclusive flag: is memory placement exclusive? - - cpuset.mem_hardwall flag: is memory allocation hardwalled - - cpuset.memory_pressure: measure of how much paging pressure in cpuset - - cpuset.memory_spread_page flag: if set, spread page cache evenly on allowed nodes - - cpuset.memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes - - cpuset.sched_load_balance flag: if set, load balance within CPUs on that cpuset - - cpuset.sched_relax_domain_level: the searching range when migrating tasks - -In addition, only the root cpuset has the following file: - - - cpuset.memory_pressure_enabled flag: compute memory_pressure? - -New cpusets are created using the mkdir system call or shell -command. The properties of a cpuset, such as its flags, allowed -CPUs and Memory Nodes, and attached tasks, are modified by writing -to the appropriate file in that cpusets directory, as listed above. - -The named hierarchical structure of nested cpusets allows partitioning -a large system into nested, dynamically changeable, "soft-partitions". - -The attachment of each task, automatically inherited at fork by any -children of that task, to a cpuset allows organizing the work load -on a system into related sets of tasks such that each set is constrained -to using the CPUs and Memory Nodes of a particular cpuset. A task -may be re-attached to any other cpuset, if allowed by the permissions -on the necessary cpuset file system directories. - -Such management of a system "in the large" integrates smoothly with -the detailed placement done on individual tasks and memory regions -using the sched_setaffinity, mbind and set_mempolicy system calls. - -The following rules apply to each cpuset: - - - Its CPUs and Memory Nodes must be a subset of its parents. - - It can't be marked exclusive unless its parent is. - - If its cpu or memory is exclusive, they may not overlap any sibling. - -These rules, and the natural hierarchy of cpusets, enable efficient -enforcement of the exclusive guarantee, without having to scan all -cpusets every time any of them change to ensure nothing overlaps a -exclusive cpuset. Also, the use of a Linux virtual file system (vfs) -to represent the cpuset hierarchy provides for a familiar permission -and name space for cpusets, with a minimum of additional kernel code. - -The cpus and mems files in the root (top_cpuset) cpuset are -read-only. The cpus file automatically tracks the value of -cpu_online_mask using a CPU hotplug notifier, and the mems file -automatically tracks the value of node_states[N_MEMORY]--i.e., -nodes with memory--using the cpuset_track_online_nodes() hook. - - -1.4 What are exclusive cpusets ? --------------------------------- - -If a cpuset is cpu or mem exclusive, no other cpuset, other than -a direct ancestor or descendant, may share any of the same CPUs or -Memory Nodes. - -A cpuset that is cpuset.mem_exclusive *or* cpuset.mem_hardwall is "hardwalled", -i.e. it restricts kernel allocations for page, buffer and other data -commonly shared by the kernel across multiple users. All cpusets, -whether hardwalled or not, restrict allocations of memory for user -space. This enables configuring a system so that several independent -jobs can share common kernel data, such as file system pages, while -isolating each job's user allocation in its own cpuset. To do this, -construct a large mem_exclusive cpuset to hold all the jobs, and -construct child, non-mem_exclusive cpusets for each individual job. -Only a small amount of typical kernel memory, such as requests from -interrupt handlers, is allowed to be taken outside even a -mem_exclusive cpuset. - - -1.5 What is memory_pressure ? ------------------------------ -The memory_pressure of a cpuset provides a simple per-cpuset metric -of the rate that the tasks in a cpuset are attempting to free up in -use memory on the nodes of the cpuset to satisfy additional memory -requests. - -This enables batch managers monitoring jobs running in dedicated -cpusets to efficiently detect what level of memory pressure that job -is causing. - -This is useful both on tightly managed systems running a wide mix of -submitted jobs, which may choose to terminate or re-prioritize jobs that -are trying to use more memory than allowed on the nodes assigned to them, -and with tightly coupled, long running, massively parallel scientific -computing jobs that will dramatically fail to meet required performance -goals if they start to use more memory than allowed to them. - -This mechanism provides a very economical way for the batch manager -to monitor a cpuset for signs of memory pressure. It's up to the -batch manager or other user code to decide what to do about it and -take action. - -==> - Unless this feature is enabled by writing "1" to the special file - /dev/cpuset/memory_pressure_enabled, the hook in the rebalance - code of __alloc_pages() for this metric reduces to simply noticing - that the cpuset_memory_pressure_enabled flag is zero. So only - systems that enable this feature will compute the metric. - -Why a per-cpuset, running average: - - Because this meter is per-cpuset, rather than per-task or mm, - the system load imposed by a batch scheduler monitoring this - metric is sharply reduced on large systems, because a scan of - the tasklist can be avoided on each set of queries. - - Because this meter is a running average, instead of an accumulating - counter, a batch scheduler can detect memory pressure with a - single read, instead of having to read and accumulate results - for a period of time. - - Because this meter is per-cpuset rather than per-task or mm, - the batch scheduler can obtain the key information, memory - pressure in a cpuset, with a single read, rather than having to - query and accumulate results over all the (dynamically changing) - set of tasks in the cpuset. - -A per-cpuset simple digital filter (requires a spinlock and 3 words -of data per-cpuset) is kept, and updated by any task attached to that -cpuset, if it enters the synchronous (direct) page reclaim code. - -A per-cpuset file provides an integer number representing the recent -(half-life of 10 seconds) rate of direct page reclaims caused by -the tasks in the cpuset, in units of reclaims attempted per second, -times 1000. - - -1.6 What is memory spread ? ---------------------------- -There are two boolean flag files per cpuset that control where the -kernel allocates pages for the file system buffers and related in -kernel data structures. They are called 'cpuset.memory_spread_page' and -'cpuset.memory_spread_slab'. - -If the per-cpuset boolean flag file 'cpuset.memory_spread_page' is set, then -the kernel will spread the file system buffers (page cache) evenly -over all the nodes that the faulting task is allowed to use, instead -of preferring to put those pages on the node where the task is running. - -If the per-cpuset boolean flag file 'cpuset.memory_spread_slab' is set, -then the kernel will spread some file system related slab caches, -such as for inodes and dentries evenly over all the nodes that the -faulting task is allowed to use, instead of preferring to put those -pages on the node where the task is running. - -The setting of these flags does not affect anonymous data segment or -stack segment pages of a task. - -By default, both kinds of memory spreading are off, and memory -pages are allocated on the node local to where the task is running, -except perhaps as modified by the task's NUMA mempolicy or cpuset -configuration, so long as sufficient free memory pages are available. - -When new cpusets are created, they inherit the memory spread settings -of their parent. - -Setting memory spreading causes allocations for the affected page -or slab caches to ignore the task's NUMA mempolicy and be spread -instead. Tasks using mbind() or set_mempolicy() calls to set NUMA -mempolicies will not notice any change in these calls as a result of -their containing task's memory spread settings. If memory spreading -is turned off, then the currently specified NUMA mempolicy once again -applies to memory page allocations. - -Both 'cpuset.memory_spread_page' and 'cpuset.memory_spread_slab' are boolean flag -files. By default they contain "0", meaning that the feature is off -for that cpuset. If a "1" is written to that file, then that turns -the named feature on. - -The implementation is simple. - -Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag -PFA_SPREAD_PAGE for each task that is in that cpuset or subsequently -joins that cpuset. The page allocation calls for the page cache -is modified to perform an inline check for this PFA_SPREAD_PAGE task -flag, and if set, a call to a new routine cpuset_mem_spread_node() -returns the node to prefer for the allocation. - -Similarly, setting 'cpuset.memory_spread_slab' turns on the flag -PFA_SPREAD_SLAB, and appropriately marked slab caches will allocate -pages from the node returned by cpuset_mem_spread_node(). - -The cpuset_mem_spread_node() routine is also simple. It uses the -value of a per-task rotor cpuset_mem_spread_rotor to select the next -node in the current task's mems_allowed to prefer for the allocation. - -This memory placement policy is also known (in other contexts) as -round-robin or interleave. - -This policy can provide substantial improvements for jobs that need -to place thread local data on the corresponding node, but that need -to access large file system data sets that need to be spread across -the several nodes in the jobs cpuset in order to fit. Without this -policy, especially for jobs that might have one thread reading in the -data set, the memory allocation across the nodes in the jobs cpuset -can become very uneven. - -1.7 What is sched_load_balance ? --------------------------------- - -The kernel scheduler (kernel/sched/core.c) automatically load balances -tasks. If one CPU is underutilized, kernel code running on that -CPU will look for tasks on other more overloaded CPUs and move those -tasks to itself, within the constraints of such placement mechanisms -as cpusets and sched_setaffinity. - -The algorithmic cost of load balancing and its impact on key shared -kernel data structures such as the task list increases more than -linearly with the number of CPUs being balanced. So the scheduler -has support to partition the systems CPUs into a number of sched -domains such that it only load balances within each sched domain. -Each sched domain covers some subset of the CPUs in the system; -no two sched domains overlap; some CPUs might not be in any sched -domain and hence won't be load balanced. - -Put simply, it costs less to balance between two smaller sched domains -than one big one, but doing so means that overloads in one of the -two domains won't be load balanced to the other one. - -By default, there is one sched domain covering all CPUs, including those -marked isolated using the kernel boot time "isolcpus=" argument. However, -the isolated CPUs will not participate in load balancing, and will not -have tasks running on them unless explicitly assigned. - -This default load balancing across all CPUs is not well suited for -the following two situations: - - 1) On large systems, load balancing across many CPUs is expensive. - If the system is managed using cpusets to place independent jobs - on separate sets of CPUs, full load balancing is unnecessary. - 2) Systems supporting realtime on some CPUs need to minimize - system overhead on those CPUs, including avoiding task load - balancing if that is not needed. - -When the per-cpuset flag "cpuset.sched_load_balance" is enabled (the default -setting), it requests that all the CPUs in that cpusets allowed 'cpuset.cpus' -be contained in a single sched domain, ensuring that load balancing -can move a task (not otherwised pinned, as by sched_setaffinity) -from any CPU in that cpuset to any other. - -When the per-cpuset flag "cpuset.sched_load_balance" is disabled, then the -scheduler will avoid load balancing across the CPUs in that cpuset, ---except-- in so far as is necessary because some overlapping cpuset -has "sched_load_balance" enabled. - -So, for example, if the top cpuset has the flag "cpuset.sched_load_balance" -enabled, then the scheduler will have one sched domain covering all -CPUs, and the setting of the "cpuset.sched_load_balance" flag in any other -cpusets won't matter, as we're already fully load balancing. - -Therefore in the above two situations, the top cpuset flag -"cpuset.sched_load_balance" should be disabled, and only some of the smaller, -child cpusets have this flag enabled. - -When doing this, you don't usually want to leave any unpinned tasks in -the top cpuset that might use non-trivial amounts of CPU, as such tasks -may be artificially constrained to some subset of CPUs, depending on -the particulars of this flag setting in descendant cpusets. Even if -such a task could use spare CPU cycles in some other CPUs, the kernel -scheduler might not consider the possibility of load balancing that -task to that underused CPU. - -Of course, tasks pinned to a particular CPU can be left in a cpuset -that disables "cpuset.sched_load_balance" as those tasks aren't going anywhere -else anyway. - -There is an impedance mismatch here, between cpusets and sched domains. -Cpusets are hierarchical and nest. Sched domains are flat; they don't -overlap and each CPU is in at most one sched domain. - -It is necessary for sched domains to be flat because load balancing -across partially overlapping sets of CPUs would risk unstable dynamics -that would be beyond our understanding. So if each of two partially -overlapping cpusets enables the flag 'cpuset.sched_load_balance', then we -form a single sched domain that is a superset of both. We won't move -a task to a CPU outside its cpuset, but the scheduler load balancing -code might waste some compute cycles considering that possibility. - -This mismatch is why there is not a simple one-to-one relation -between which cpusets have the flag "cpuset.sched_load_balance" enabled, -and the sched domain configuration. If a cpuset enables the flag, it -will get balancing across all its CPUs, but if it disables the flag, -it will only be assured of no load balancing if no other overlapping -cpuset enables the flag. - -If two cpusets have partially overlapping 'cpuset.cpus' allowed, and only -one of them has this flag enabled, then the other may find its -tasks only partially load balanced, just on the overlapping CPUs. -This is just the general case of the top_cpuset example given a few -paragraphs above. In the general case, as in the top cpuset case, -don't leave tasks that might use non-trivial amounts of CPU in -such partially load balanced cpusets, as they may be artificially -constrained to some subset of the CPUs allowed to them, for lack of -load balancing to the other CPUs. - -CPUs in "cpuset.isolcpus" were excluded from load balancing by the -isolcpus= kernel boot option, and will never be load balanced regardless -of the value of "cpuset.sched_load_balance" in any cpuset. - -1.7.1 sched_load_balance implementation details. ------------------------------------------------- - -The per-cpuset flag 'cpuset.sched_load_balance' defaults to enabled (contrary -to most cpuset flags.) When enabled for a cpuset, the kernel will -ensure that it can load balance across all the CPUs in that cpuset -(makes sure that all the CPUs in the cpus_allowed of that cpuset are -in the same sched domain.) - -If two overlapping cpusets both have 'cpuset.sched_load_balance' enabled, -then they will be (must be) both in the same sched domain. - -If, as is the default, the top cpuset has 'cpuset.sched_load_balance' enabled, -then by the above that means there is a single sched domain covering -the whole system, regardless of any other cpuset settings. - -The kernel commits to user space that it will avoid load balancing -where it can. It will pick as fine a granularity partition of sched -domains as it can while still providing load balancing for any set -of CPUs allowed to a cpuset having 'cpuset.sched_load_balance' enabled. - -The internal kernel cpuset to scheduler interface passes from the -cpuset code to the scheduler code a partition of the load balanced -CPUs in the system. This partition is a set of subsets (represented -as an array of struct cpumask) of CPUs, pairwise disjoint, that cover -all the CPUs that must be load balanced. - -The cpuset code builds a new such partition and passes it to the -scheduler sched domain setup code, to have the sched domains rebuilt -as necessary, whenever: - - - the 'cpuset.sched_load_balance' flag of a cpuset with non-empty CPUs changes, - - or CPUs come or go from a cpuset with this flag enabled, - - or 'cpuset.sched_relax_domain_level' value of a cpuset with non-empty CPUs - and with this flag enabled changes, - - or a cpuset with non-empty CPUs and with this flag enabled is removed, - - or a cpu is offlined/onlined. - -This partition exactly defines what sched domains the scheduler should -setup - one sched domain for each element (struct cpumask) in the -partition. - -The scheduler remembers the currently active sched domain partitions. -When the scheduler routine partition_sched_domains() is invoked from -the cpuset code to update these sched domains, it compares the new -partition requested with the current, and updates its sched domains, -removing the old and adding the new, for each change. - - -1.8 What is sched_relax_domain_level ? --------------------------------------- - -In sched domain, the scheduler migrates tasks in 2 ways; periodic load -balance on tick, and at time of some schedule events. - -When a task is woken up, scheduler try to move the task on idle CPU. -For example, if a task A running on CPU X activates another task B -on the same CPU X, and if CPU Y is X's sibling and performing idle, -then scheduler migrate task B to CPU Y so that task B can start on -CPU Y without waiting task A on CPU X. - -And if a CPU run out of tasks in its runqueue, the CPU try to pull -extra tasks from other busy CPUs to help them before it is going to -be idle. - -Of course it takes some searching cost to find movable tasks and/or -idle CPUs, the scheduler might not search all CPUs in the domain -every time. In fact, in some architectures, the searching ranges on -events are limited in the same socket or node where the CPU locates, -while the load balance on tick searches all. - -For example, assume CPU Z is relatively far from CPU X. Even if CPU Z -is idle while CPU X and the siblings are busy, scheduler can't migrate -woken task B from X to Z since it is out of its searching range. -As the result, task B on CPU X need to wait task A or wait load balance -on the next tick. For some applications in special situation, waiting -1 tick may be too long. - -The 'cpuset.sched_relax_domain_level' file allows you to request changing -this searching range as you like. This file takes int value which -indicates size of searching range in levels ideally as follows, -otherwise initial value -1 that indicates the cpuset has no request. - -====== =========================================================== - -1 no request. use system default or follow request of others. - 0 no search. - 1 search siblings (hyperthreads in a core). - 2 search cores in a package. - 3 search cpus in a node [= system wide on non-NUMA system] - 4 search nodes in a chunk of node [on NUMA system] - 5 search system wide [on NUMA system] -====== =========================================================== - -The system default is architecture dependent. The system default -can be changed using the relax_domain_level= boot parameter. - -This file is per-cpuset and affect the sched domain where the cpuset -belongs to. Therefore if the flag 'cpuset.sched_load_balance' of a cpuset -is disabled, then 'cpuset.sched_relax_domain_level' have no effect since -there is no sched domain belonging the cpuset. - -If multiple cpusets are overlapping and hence they form a single sched -domain, the largest value among those is used. Be careful, if one -requests 0 and others are -1 then 0 is used. - -Note that modifying this file will have both good and bad effects, -and whether it is acceptable or not depends on your situation. -Don't modify this file if you are not sure. - -If your situation is: - - - The migration costs between each cpu can be assumed considerably - small(for you) due to your special application's behavior or - special hardware support for CPU cache etc. - - The searching cost doesn't have impact(for you) or you can make - the searching cost enough small by managing cpuset to compact etc. - - The latency is required even it sacrifices cache hit rate etc. - then increasing 'sched_relax_domain_level' would benefit you. - - -1.9 How do I use cpusets ? --------------------------- - -In order to minimize the impact of cpusets on critical kernel -code, such as the scheduler, and due to the fact that the kernel -does not support one task updating the memory placement of another -task directly, the impact on a task of changing its cpuset CPU -or Memory Node placement, or of changing to which cpuset a task -is attached, is subtle. - -If a cpuset has its Memory Nodes modified, then for each task attached -to that cpuset, the next time that the kernel attempts to allocate -a page of memory for that task, the kernel will notice the change -in the task's cpuset, and update its per-task memory placement to -remain within the new cpusets memory placement. If the task was using -mempolicy MPOL_BIND, and the nodes to which it was bound overlap with -its new cpuset, then the task will continue to use whatever subset -of MPOL_BIND nodes are still allowed in the new cpuset. If the task -was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed -in the new cpuset, then the task will be essentially treated as if it -was MPOL_BIND bound to the new cpuset (even though its NUMA placement, -as queried by get_mempolicy(), doesn't change). If a task is moved -from one cpuset to another, then the kernel will adjust the task's -memory placement, as above, the next time that the kernel attempts -to allocate a page of memory for that task. - -If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset -will have its allowed CPU placement changed immediately. Similarly, -if a task's pid is written to another cpuset's 'tasks' file, then its -allowed CPU placement is changed immediately. If such a task had been -bound to some subset of its cpuset using the sched_setaffinity() call, -the task will be allowed to run on any CPU allowed in its new cpuset, -negating the effect of the prior sched_setaffinity() call. - -In summary, the memory placement of a task whose cpuset is changed is -updated by the kernel, on the next allocation of a page for that task, -and the processor placement is updated immediately. - -Normally, once a page is allocated (given a physical page -of main memory) then that page stays on whatever node it -was allocated, so long as it remains allocated, even if the -cpusets memory placement policy 'cpuset.mems' subsequently changes. -If the cpuset flag file 'cpuset.memory_migrate' is set true, then when -tasks are attached to that cpuset, any pages that task had -allocated to it on nodes in its previous cpuset are migrated -to the task's new cpuset. The relative placement of the page within -the cpuset is preserved during these migration operations if possible. -For example if the page was on the second valid node of the prior cpuset -then the page will be placed on the second valid node of the new cpuset. - -Also if 'cpuset.memory_migrate' is set true, then if that cpuset's -'cpuset.mems' file is modified, pages allocated to tasks in that -cpuset, that were on nodes in the previous setting of 'cpuset.mems', -will be moved to nodes in the new setting of 'mems.' -Pages that were not in the task's prior cpuset, or in the cpuset's -prior 'cpuset.mems' setting, will not be moved. - -There is an exception to the above. If hotplug functionality is used -to remove all the CPUs that are currently assigned to a cpuset, -then all the tasks in that cpuset will be moved to the nearest ancestor -with non-empty cpus. But the moving of some (or all) tasks might fail if -cpuset is bound with another cgroup subsystem which has some restrictions -on task attaching. In this failing case, those tasks will stay -in the original cpuset, and the kernel will automatically update -their cpus_allowed to allow all online CPUs. When memory hotplug -functionality for removing Memory Nodes is available, a similar exception -is expected to apply there as well. In general, the kernel prefers to -violate cpuset placement, over starving a task that has had all -its allowed CPUs or Memory Nodes taken offline. - -There is a second exception to the above. GFP_ATOMIC requests are -kernel internal allocations that must be satisfied, immediately. -The kernel may drop some request, in rare cases even panic, if a -GFP_ATOMIC alloc fails. If the request cannot be satisfied within -the current task's cpuset, then we relax the cpuset, and look for -memory anywhere we can find it. It's better to violate the cpuset -than stress the kernel. - -To start a new job that is to be contained within a cpuset, the steps are: - - 1) mkdir /sys/fs/cgroup/cpuset - 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset - 3) Create the new cpuset by doing mkdir's and write's (or echo's) in - the /sys/fs/cgroup/cpuset virtual file system. - 4) Start a task that will be the "founding father" of the new job. - 5) Attach that task to the new cpuset by writing its pid to the - /sys/fs/cgroup/cpuset tasks file for that cpuset. - 6) fork, exec or clone the job tasks from this founding father task. - -For example, the following sequence of commands will setup a cpuset -named "Charlie", containing just CPUs 2 and 3, and Memory Node 1, -and then start a subshell 'sh' in that cpuset:: - - mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset - cd /sys/fs/cgroup/cpuset - mkdir Charlie - cd Charlie - /bin/echo 2-3 > cpuset.cpus - /bin/echo 1 > cpuset.mems - /bin/echo $$ > tasks - sh - # The subshell 'sh' is now running in cpuset Charlie - # The next line should display '/Charlie' - cat /proc/self/cpuset - -There are ways to query or modify cpusets: - - - via the cpuset file system directly, using the various cd, mkdir, echo, - cat, rmdir commands from the shell, or their equivalent from C. - - via the C library libcpuset. - - via the C library libcgroup. - (http://sourceforge.net/projects/libcg/) - - via the python application cset. - (http://code.google.com/p/cpuset/) - -The sched_setaffinity calls can also be done at the shell prompt using -SGI's runon or Robert Love's taskset. The mbind and set_mempolicy -calls can be done at the shell prompt using the numactl command -(part of Andi Kleen's numa package). - -2. Usage Examples and Syntax -============================ - -2.1 Basic Usage ---------------- - -Creating, modifying, using the cpusets can be done through the cpuset -virtual filesystem. - -To mount it, type: -# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset - -Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the -tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset -is the cpuset that holds the whole system. - -If you want to create a new cpuset under /sys/fs/cgroup/cpuset:: - - # cd /sys/fs/cgroup/cpuset - # mkdir my_cpuset - -Now you want to do something with this cpuset:: - - # cd my_cpuset - -In this directory you can find several files:: - - # ls - cgroup.clone_children cpuset.memory_pressure - cgroup.event_control cpuset.memory_spread_page - cgroup.procs cpuset.memory_spread_slab - cpuset.cpu_exclusive cpuset.mems - cpuset.cpus cpuset.sched_load_balance - cpuset.mem_exclusive cpuset.sched_relax_domain_level - cpuset.mem_hardwall notify_on_release - cpuset.memory_migrate tasks - -Reading them will give you information about the state of this cpuset: -the CPUs and Memory Nodes it can use, the processes that are using -it, its properties. By writing to these files you can manipulate -the cpuset. - -Set some flags:: - - # /bin/echo 1 > cpuset.cpu_exclusive - -Add some cpus:: - - # /bin/echo 0-7 > cpuset.cpus - -Add some mems:: - - # /bin/echo 0-7 > cpuset.mems - -Now attach your shell to this cpuset:: - - # /bin/echo $$ > tasks - -You can also create cpusets inside your cpuset by using mkdir in this -directory:: - - # mkdir my_sub_cs - -To remove a cpuset, just use rmdir:: - - # rmdir my_sub_cs - -This will fail if the cpuset is in use (has cpusets inside, or has -processes attached). - -Note that for legacy reasons, the "cpuset" filesystem exists as a -wrapper around the cgroup filesystem. - -The command:: - - mount -t cpuset X /sys/fs/cgroup/cpuset - -is equivalent to:: - - mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset - echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent - -2.2 Adding/removing cpus ------------------------- - -This is the syntax to use when writing in the cpus or mems files -in cpuset directories:: - - # /bin/echo 1-4 > cpuset.cpus -> set cpus list to cpus 1,2,3,4 - # /bin/echo 1,2,3,4 > cpuset.cpus -> set cpus list to cpus 1,2,3,4 - -To add a CPU to a cpuset, write the new list of CPUs including the -CPU to be added. To add 6 to the above cpuset:: - - # /bin/echo 1-4,6 > cpuset.cpus -> set cpus list to cpus 1,2,3,4,6 - -Similarly to remove a CPU from a cpuset, write the new list of CPUs -without the CPU to be removed. - -To remove all the CPUs:: - - # /bin/echo "" > cpuset.cpus -> clear cpus list - -2.3 Setting flags ------------------ - -The syntax is very simple:: - - # /bin/echo 1 > cpuset.cpu_exclusive -> set flag 'cpuset.cpu_exclusive' - # /bin/echo 0 > cpuset.cpu_exclusive -> unset flag 'cpuset.cpu_exclusive' - -2.4 Attaching processes ------------------------ - -:: - - # /bin/echo PID > tasks - -Note that it is PID, not PIDs. You can only attach ONE task at a time. -If you have several tasks to attach, you have to do it one after another:: - - # /bin/echo PID1 > tasks - # /bin/echo PID2 > tasks - ... - # /bin/echo PIDn > tasks - - -3. Questions -============ - -Q: - what's up with this '/bin/echo' ? - -A: - bash's builtin 'echo' command does not check calls to write() against - errors. If you use it in the cpuset file system, you won't be - able to tell whether a command succeeded or failed. - -Q: - When I attach processes, only the first of the line gets really attached ! - -A: - We can only return one error code per call to write(). So you should also - put only ONE pid. - -4. Contact -========== - -Web: http://www.bullopensource.org/cpuset diff --git a/Documentation/cgroup-v1/devices.rst b/Documentation/cgroup-v1/devices.rst deleted file mode 100644 index e1886783961e..000000000000 --- a/Documentation/cgroup-v1/devices.rst +++ /dev/null @@ -1,132 +0,0 @@ -=========================== -Device Whitelist Controller -=========================== - -1. Description -============== - -Implement a cgroup to track and enforce open and mknod restrictions -on device files. A device cgroup associates a device access -whitelist with each cgroup. A whitelist entry has 4 fields. -'type' is a (all), c (char), or b (block). 'all' means it applies -to all types and all major and minor numbers. Major and minor are -either an integer or * for all. Access is a composition of r -(read), w (write), and m (mknod). - -The root device cgroup starts with rwm to 'all'. A child device -cgroup gets a copy of the parent. Administrators can then remove -devices from the whitelist or add new entries. A child cgroup can -never receive a device access which is denied by its parent. - -2. User Interface -================= - -An entry is added using devices.allow, and removed using -devices.deny. For instance:: - - echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow - -allows cgroup 1 to read and mknod the device usually known as -/dev/null. Doing:: - - echo a > /sys/fs/cgroup/1/devices.deny - -will remove the default 'a *:* rwm' entry. Doing:: - - echo a > /sys/fs/cgroup/1/devices.allow - -will add the 'a *:* rwm' entry to the whitelist. - -3. Security -=========== - -Any task can move itself between cgroups. This clearly won't -suffice, but we can decide the best way to adequately restrict -movement as people get some experience with this. We may just want -to require CAP_SYS_ADMIN, which at least is a separate bit from -CAP_MKNOD. We may want to just refuse moving to a cgroup which -isn't a descendant of the current one. Or we may want to use -CAP_MAC_ADMIN, since we really are trying to lock down root. - -CAP_SYS_ADMIN is needed to modify the whitelist or move another -task to a new cgroup. (Again we'll probably want to change that). - -A cgroup may not be granted more permissions than the cgroup's -parent has. - -4. Hierarchy -============ - -device cgroups maintain hierarchy by making sure a cgroup never has more -access permissions than its parent. Every time an entry is written to -a cgroup's devices.deny file, all its children will have that entry removed -from their whitelist and all the locally set whitelist entries will be -re-evaluated. In case one of the locally set whitelist entries would provide -more access than the cgroup's parent, it'll be removed from the whitelist. - -Example:: - - A - / \ - B - - group behavior exceptions - A allow "b 8:* rwm", "c 116:1 rw" - B deny "c 1:3 rwm", "c 116:2 rwm", "b 3:* rwm" - -If a device is denied in group A:: - - # echo "c 116:* r" > A/devices.deny - -it'll propagate down and after revalidating B's entries, the whitelist entry -"c 116:2 rwm" will be removed:: - - group whitelist entries denied devices - A all "b 8:* rwm", "c 116:* rw" - B "c 1:3 rwm", "b 3:* rwm" all the rest - -In case parent's exceptions change and local exceptions are not allowed -anymore, they'll be deleted. - -Notice that new whitelist entries will not be propagated:: - - A - / \ - B - - group whitelist entries denied devices - A "c 1:3 rwm", "c 1:5 r" all the rest - B "c 1:3 rwm", "c 1:5 r" all the rest - -when adding ``c *:3 rwm``:: - - # echo "c *:3 rwm" >A/devices.allow - -the result:: - - group whitelist entries denied devices - A "c *:3 rwm", "c 1:5 r" all the rest - B "c 1:3 rwm", "c 1:5 r" all the rest - -but now it'll be possible to add new entries to B:: - - # echo "c 2:3 rwm" >B/devices.allow - # echo "c 50:3 r" >B/devices.allow - -or even:: - - # echo "c *:3 rwm" >B/devices.allow - -Allowing or denying all by writing 'a' to devices.allow or devices.deny will -not be possible once the device cgroups has children. - -4.1 Hierarchy (internal implementation) ---------------------------------------- - -device cgroups is implemented internally using a behavior (ALLOW, DENY) and a -list of exceptions. The internal state is controlled using the same user -interface to preserve compatibility with the previous whitelist-only -implementation. Removal or addition of exceptions that will reduce the access -to devices will be propagated down the hierarchy. -For every propagated exception, the effective rules will be re-evaluated based -on current parent's access rules. diff --git a/Documentation/cgroup-v1/freezer-subsystem.rst b/Documentation/cgroup-v1/freezer-subsystem.rst deleted file mode 100644 index 582d3427de3f..000000000000 --- a/Documentation/cgroup-v1/freezer-subsystem.rst +++ /dev/null @@ -1,127 +0,0 @@ -============== -Cgroup Freezer -============== - -The cgroup freezer is useful to batch job management system which start -and stop sets of tasks in order to schedule the resources of a machine -according to the desires of a system administrator. This sort of program -is often used on HPC clusters to schedule access to the cluster as a -whole. The cgroup freezer uses cgroups to describe the set of tasks to -be started/stopped by the batch job management system. It also provides -a means to start and stop the tasks composing the job. - -The cgroup freezer will also be useful for checkpointing running groups -of tasks. The freezer allows the checkpoint code to obtain a consistent -image of the tasks by attempting to force the tasks in a cgroup into a -quiescent state. Once the tasks are quiescent another task can -walk /proc or invoke a kernel interface to gather information about the -quiesced tasks. Checkpointed tasks can be restarted later should a -recoverable error occur. This also allows the checkpointed tasks to be -migrated between nodes in a cluster by copying the gathered information -to another node and restarting the tasks there. - -Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping -and resuming tasks in userspace. Both of these signals are observable -from within the tasks we wish to freeze. While SIGSTOP cannot be caught, -blocked, or ignored it can be seen by waiting or ptracing parent tasks. -SIGCONT is especially unsuitable since it can be caught by the task. Any -programs designed to watch for SIGSTOP and SIGCONT could be broken by -attempting to use SIGSTOP and SIGCONT to stop and resume tasks. We can -demonstrate this problem using nested bash shells:: - - $ echo $$ - 16644 - $ bash - $ echo $$ - 16690 - - From a second, unrelated bash shell: - $ kill -SIGSTOP 16690 - $ kill -SIGCONT 16690 - - - -This happens because bash can observe both signals and choose how it -responds to them. - -Another example of a program which catches and responds to these -signals is gdb. In fact any program designed to use ptrace is likely to -have a problem with this method of stopping and resuming tasks. - -In contrast, the cgroup freezer uses the kernel freezer code to -prevent the freeze/unfreeze cycle from becoming visible to the tasks -being frozen. This allows the bash example above and gdb to run as -expected. - -The cgroup freezer is hierarchical. Freezing a cgroup freezes all -tasks belonging to the cgroup and all its descendant cgroups. Each -cgroup has its own state (self-state) and the state inherited from the -parent (parent-state). Iff both states are THAWED, the cgroup is -THAWED. - -The following cgroupfs files are created by cgroup freezer. - -* freezer.state: Read-write. - - When read, returns the effective state of the cgroup - "THAWED", - "FREEZING" or "FROZEN". This is the combined self and parent-states. - If any is freezing, the cgroup is freezing (FREEZING or FROZEN). - - FREEZING cgroup transitions into FROZEN state when all tasks - belonging to the cgroup and its descendants become frozen. Note that - a cgroup reverts to FREEZING from FROZEN after a new task is added - to the cgroup or one of its descendant cgroups until the new task is - frozen. - - When written, sets the self-state of the cgroup. Two values are - allowed - "FROZEN" and "THAWED". If FROZEN is written, the cgroup, - if not already freezing, enters FREEZING state along with all its - descendant cgroups. - - If THAWED is written, the self-state of the cgroup is changed to - THAWED. Note that the effective state may not change to THAWED if - the parent-state is still freezing. If a cgroup's effective state - becomes THAWED, all its descendants which are freezing because of - the cgroup also leave the freezing state. - -* freezer.self_freezing: Read only. - - Shows the self-state. 0 if the self-state is THAWED; otherwise, 1. - This value is 1 iff the last write to freezer.state was "FROZEN". - -* freezer.parent_freezing: Read only. - - Shows the parent-state. 0 if none of the cgroup's ancestors is - frozen; otherwise, 1. - -The root cgroup is non-freezable and the above interface files don't -exist. - -* Examples of usage:: - - # mkdir /sys/fs/cgroup/freezer - # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer - # mkdir /sys/fs/cgroup/freezer/0 - # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks - -to get status of the freezer subsystem:: - - # cat /sys/fs/cgroup/freezer/0/freezer.state - THAWED - -to freeze all tasks in the container:: - - # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state - # cat /sys/fs/cgroup/freezer/0/freezer.state - FREEZING - # cat /sys/fs/cgroup/freezer/0/freezer.state - FROZEN - -to unfreeze all tasks in the container:: - - # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state - # cat /sys/fs/cgroup/freezer/0/freezer.state - THAWED - -This is the basic mechanism which should do the right thing for user space task -in a simple scenario. diff --git a/Documentation/cgroup-v1/hugetlb.rst b/Documentation/cgroup-v1/hugetlb.rst deleted file mode 100644 index a3902aa253a9..000000000000 --- a/Documentation/cgroup-v1/hugetlb.rst +++ /dev/null @@ -1,50 +0,0 @@ -================== -HugeTLB Controller -================== - -The HugeTLB controller allows to limit the HugeTLB usage per control group and -enforces the controller limit during page fault. Since HugeTLB doesn't -support page reclaim, enforcing the limit at page fault time implies that, -the application will get SIGBUS signal if it tries to access HugeTLB pages -beyond its limit. This requires the application to know beforehand how much -HugeTLB pages it would require for its use. - -HugeTLB controller can be created by first mounting the cgroup filesystem. - -# mount -t cgroup -o hugetlb none /sys/fs/cgroup - -With the above step, the initial or the parent HugeTLB group becomes -visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in -the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup. - -New groups can be created under the parent group /sys/fs/cgroup:: - - # cd /sys/fs/cgroup - # mkdir g1 - # echo $$ > g1/tasks - -The above steps create a new group g1 and move the current shell -process (bash) into it. - -Brief summary of control files:: - - hugetlb..limit_in_bytes # set/show limit of "hugepagesize" hugetlb usage - hugetlb..max_usage_in_bytes # show max "hugepagesize" hugetlb usage recorded - hugetlb..usage_in_bytes # show current usage for "hugepagesize" hugetlb - hugetlb..failcnt # show the number of allocation failure due to HugeTLB limit - -For a system supporting three hugepage sizes (64k, 32M and 1G), the control -files include:: - - hugetlb.1GB.limit_in_bytes - hugetlb.1GB.max_usage_in_bytes - hugetlb.1GB.usage_in_bytes - hugetlb.1GB.failcnt - hugetlb.64KB.limit_in_bytes - hugetlb.64KB.max_usage_in_bytes - hugetlb.64KB.usage_in_bytes - hugetlb.64KB.failcnt - hugetlb.32MB.limit_in_bytes - hugetlb.32MB.max_usage_in_bytes - hugetlb.32MB.usage_in_bytes - hugetlb.32MB.failcnt diff --git a/Documentation/cgroup-v1/index.rst b/Documentation/cgroup-v1/index.rst deleted file mode 100644 index fe76d42edc11..000000000000 --- a/Documentation/cgroup-v1/index.rst +++ /dev/null @@ -1,30 +0,0 @@ -:orphan: - -======================== -Control Groups version 1 -======================== - -.. toctree:: - :maxdepth: 1 - - cgroups - - blkio-controller - cpuacct - cpusets - devices - freezer-subsystem - hugetlb - memcg_test - memory - net_cls - net_prio - pids - rdma - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` diff --git a/Documentation/cgroup-v1/memcg_test.rst b/Documentation/cgroup-v1/memcg_test.rst deleted file mode 100644 index 91bd18c6a514..000000000000 --- a/Documentation/cgroup-v1/memcg_test.rst +++ /dev/null @@ -1,355 +0,0 @@ -===================================================== -Memory Resource Controller(Memcg) Implementation Memo -===================================================== - -Last Updated: 2010/2 - -Base Kernel Version: based on 2.6.33-rc7-mm(candidate for 34). - -Because VM is getting complex (one of reasons is memcg...), memcg's behavior -is complex. This is a document for memcg's internal behavior. -Please note that implementation details can be changed. - -(*) Topics on API should be in Documentation/cgroup-v1/memory.rst) - -0. How to record usage ? -======================== - - 2 objects are used. - - page_cgroup ....an object per page. - - Allocated at boot or memory hotplug. Freed at memory hot removal. - - swap_cgroup ... an entry per swp_entry. - - Allocated at swapon(). Freed at swapoff(). - - The page_cgroup has USED bit and double count against a page_cgroup never - occurs. swap_cgroup is used only when a charged page is swapped-out. - -1. Charge -========= - - a page/swp_entry may be charged (usage += PAGE_SIZE) at - - mem_cgroup_try_charge() - -2. Uncharge -=========== - - a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by - - mem_cgroup_uncharge() - Called when a page's refcount goes down to 0. - - mem_cgroup_uncharge_swap() - Called when swp_entry's refcnt goes down to 0. A charge against swap - disappears. - -3. charge-commit-cancel -======================= - - Memcg pages are charged in two steps: - - - mem_cgroup_try_charge() - - mem_cgroup_commit_charge() or mem_cgroup_cancel_charge() - - At try_charge(), there are no flags to say "this page is charged". - at this point, usage += PAGE_SIZE. - - At commit(), the page is associated with the memcg. - - At cancel(), simply usage -= PAGE_SIZE. - -Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. - -4. Anonymous -============ - - Anonymous page is newly allocated at - - page fault into MAP_ANONYMOUS mapping. - - Copy-On-Write. - - 4.1 Swap-in. - At swap-in, the page is taken from swap-cache. There are 2 cases. - - (a) If the SwapCache is newly allocated and read, it has no charges. - (b) If the SwapCache has been mapped by processes, it has been - charged already. - - 4.2 Swap-out. - At swap-out, typical state transition is below. - - (a) add to swap cache. (marked as SwapCache) - swp_entry's refcnt += 1. - (b) fully unmapped. - swp_entry's refcnt += # of ptes. - (c) write back to swap. - (d) delete from swap cache. (remove from SwapCache) - swp_entry's refcnt -= 1. - - - Finally, at task exit, - (e) zap_pte() is called and swp_entry's refcnt -=1 -> 0. - -5. Page Cache -============= - - Page Cache is charged at - - add_to_page_cache_locked(). - - The logic is very clear. (About migration, see below) - - Note: - __remove_from_page_cache() is called by remove_from_page_cache() - and __remove_mapping(). - -6. Shmem(tmpfs) Page Cache -=========================== - - The best way to understand shmem's page state transition is to read - mm/shmem.c. - - But brief explanation of the behavior of memcg around shmem will be - helpful to understand the logic. - - Shmem's page (just leaf page, not direct/indirect block) can be on - - - radix-tree of shmem's inode. - - SwapCache. - - Both on radix-tree and SwapCache. This happens at swap-in - and swap-out, - - It's charged when... - - - A new page is added to shmem's radix-tree. - - A swp page is read. (move a charge from swap_cgroup to page_cgroup) - -7. Page Migration -================= - - mem_cgroup_migrate() - -8. LRU -====== - Each memcg has its own private LRU. Now, its handling is under global - VM's control (means that it's handled under global pgdat->lru_lock). - Almost all routines around memcg's LRU is called by global LRU's - list management functions under pgdat->lru_lock. - - A special function is mem_cgroup_isolate_pages(). This scans - memcg's private LRU and call __isolate_lru_page() to extract a page - from LRU. - - (By __isolate_lru_page(), the page is removed from both of global and - private LRU.) - - -9. Typical Tests. -================= - - Tests for racy cases. - -9.1 Small limit to memcg. -------------------------- - - When you do test to do racy case, it's good test to set memcg's limit - to be very small rather than GB. Many races found in the test under - xKB or xxMB limits. - - (Memory behavior under GB and Memory behavior under MB shows very - different situation.) - -9.2 Shmem ---------- - - Historically, memcg's shmem handling was poor and we saw some amount - of troubles here. This is because shmem is page-cache but can be - SwapCache. Test with shmem/tmpfs is always good test. - -9.3 Migration -------------- - - For NUMA, migration is an another special case. To do easy test, cpuset - is useful. Following is a sample script to do migration:: - - mount -t cgroup -o cpuset none /opt/cpuset - - mkdir /opt/cpuset/01 - echo 1 > /opt/cpuset/01/cpuset.cpus - echo 0 > /opt/cpuset/01/cpuset.mems - echo 1 > /opt/cpuset/01/cpuset.memory_migrate - mkdir /opt/cpuset/02 - echo 1 > /opt/cpuset/02/cpuset.cpus - echo 1 > /opt/cpuset/02/cpuset.mems - echo 1 > /opt/cpuset/02/cpuset.memory_migrate - - In above set, when you moves a task from 01 to 02, page migration to - node 0 to node 1 will occur. Following is a script to migrate all - under cpuset.:: - - -- - move_task() - { - for pid in $1 - do - /bin/echo $pid >$2/tasks 2>/dev/null - echo -n $pid - echo -n " " - done - echo END - } - - G1_TASK=`cat ${G1}/tasks` - G2_TASK=`cat ${G2}/tasks` - move_task "${G1_TASK}" ${G2} & - -- - -9.4 Memory hotplug ------------------- - - memory hotplug test is one of good test. - - to offline memory, do following:: - - # echo offline > /sys/devices/system/memory/memoryXXX/state - - (XXX is the place of memory) - - This is an easy way to test page migration, too. - -9.5 mkdir/rmdir ---------------- - - When using hierarchy, mkdir/rmdir test should be done. - Use tests like the following:: - - echo 1 >/opt/cgroup/01/memory/use_hierarchy - mkdir /opt/cgroup/01/child_a - mkdir /opt/cgroup/01/child_b - - set limit to 01. - add limit to 01/child_b - run jobs under child_a and child_b - - create/delete following groups at random while jobs are running:: - - /opt/cgroup/01/child_a/child_aa - /opt/cgroup/01/child_b/child_bb - /opt/cgroup/01/child_c - - running new jobs in new group is also good. - -9.6 Mount with other subsystems -------------------------------- - - Mounting with other subsystems is a good test because there is a - race and lock dependency with other cgroup subsystems. - - example:: - - # mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices - - and do task move, mkdir, rmdir etc...under this. - -9.7 swapoff ------------ - - Besides management of swap is one of complicated parts of memcg, - call path of swap-in at swapoff is not same as usual swap-in path.. - It's worth to be tested explicitly. - - For example, test like following is good: - - (Shell-A):: - - # mount -t cgroup none /cgroup -o memory - # mkdir /cgroup/test - # echo 40M > /cgroup/test/memory.limit_in_bytes - # echo 0 > /cgroup/test/tasks - - Run malloc(100M) program under this. You'll see 60M of swaps. - - (Shell-B):: - - # move all tasks in /cgroup/test to /cgroup - # /sbin/swapoff -a - # rmdir /cgroup/test - # kill malloc task. - - Of course, tmpfs v.s. swapoff test should be tested, too. - -9.8 OOM-Killer --------------- - - Out-of-memory caused by memcg's limit will kill tasks under - the memcg. When hierarchy is used, a task under hierarchy - will be killed by the kernel. - - In this case, panic_on_oom shouldn't be invoked and tasks - in other groups shouldn't be killed. - - It's not difficult to cause OOM under memcg as following. - - Case A) when you can swapoff:: - - #swapoff -a - #echo 50M > /memory.limit_in_bytes - - run 51M of malloc - - Case B) when you use mem+swap limitation:: - - #echo 50M > memory.limit_in_bytes - #echo 50M > memory.memsw.limit_in_bytes - - run 51M of malloc - -9.9 Move charges at task migration ----------------------------------- - - Charges associated with a task can be moved along with task migration. - - (Shell-A):: - - #mkdir /cgroup/A - #echo $$ >/cgroup/A/tasks - - run some programs which uses some amount of memory in /cgroup/A. - - (Shell-B):: - - #mkdir /cgroup/B - #echo 1 >/cgroup/B/memory.move_charge_at_immigrate - #echo "pid of the program running in group A" >/cgroup/B/tasks - - You can see charges have been moved by reading ``*.usage_in_bytes`` or - memory.stat of both A and B. - - See 8.2 of Documentation/cgroup-v1/memory.rst to see what value should - be written to move_charge_at_immigrate. - -9.10 Memory thresholds ----------------------- - - Memory controller implements memory thresholds using cgroups notification - API. You can use tools/cgroup/cgroup_event_listener.c to test it. - - (Shell-A) Create cgroup and run event listener:: - - # mkdir /cgroup/A - # ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M - - (Shell-B) Add task to cgroup and try to allocate and free memory:: - - # echo $$ >/cgroup/A/tasks - # a="$(dd if=/dev/zero bs=1M count=10)" - # a= - - You will see message from cgroup_event_listener every time you cross - the thresholds. - - Use /cgroup/A/memory.memsw.usage_in_bytes to test memsw thresholds. - - It's good idea to test root cgroup as well. diff --git a/Documentation/cgroup-v1/memory.rst b/Documentation/cgroup-v1/memory.rst deleted file mode 100644 index 41bdc038dad9..000000000000 --- a/Documentation/cgroup-v1/memory.rst +++ /dev/null @@ -1,1003 +0,0 @@ -========================== -Memory Resource Controller -========================== - -NOTE: - This document is hopelessly outdated and it asks for a complete - rewrite. It still contains a useful information so we are keeping it - here but make sure to check the current code if you need a deeper - understanding. - -NOTE: - The Memory Resource Controller has generically been referred to as the - memory controller in this document. Do not confuse memory controller - used here with the memory controller that is used in hardware. - -(For editors) In this document: - When we mention a cgroup (cgroupfs's directory) with memory controller, - we call it "memory cgroup". When you see git-log and source code, you'll - see patch's title and function names tend to use "memcg". - In this document, we avoid using it. - -Benefits and Purpose of the memory controller -============================================= - -The memory controller isolates the memory behaviour of a group of tasks -from the rest of the system. The article on LWN [12] mentions some probable -uses of the memory controller. The memory controller can be used to - -a. Isolate an application or a group of applications - Memory-hungry applications can be isolated and limited to a smaller - amount of memory. -b. Create a cgroup with a limited amount of memory; this can be used - as a good alternative to booting with mem=XXXX. -c. Virtualization solutions can control the amount of memory they want - to assign to a virtual machine instance. -d. A CD/DVD burner could control the amount of memory used by the - rest of the system to ensure that burning does not fail due to lack - of available memory. -e. There are several other use cases; find one or use the controller just - for fun (to learn and hack on the VM subsystem). - -Current Status: linux-2.6.34-mmotm(development version of 2010/April) - -Features: - - - accounting anonymous pages, file caches, swap caches usage and limiting them. - - pages are linked to per-memcg LRU exclusively, and there is no global LRU. - - optionally, memory+swap usage can be accounted and limited. - - hierarchical accounting - - soft limit - - moving (recharging) account at moving a task is selectable. - - usage threshold notifier - - memory pressure notifier - - oom-killer disable knob and oom-notifier - - Root cgroup has no limit controls. - - Kernel memory support is a work in progress, and the current version provides - basically functionality. (See Section 2.7) - -Brief summary of control files. - -==================================== ========================================== - tasks attach a task(thread) and show list of - threads - cgroup.procs show list of processes - cgroup.event_control an interface for event_fd() - memory.usage_in_bytes show current usage for memory - (See 5.5 for details) - memory.memsw.usage_in_bytes show current usage for memory+Swap - (See 5.5 for details) - memory.limit_in_bytes set/show limit of memory usage - memory.memsw.limit_in_bytes set/show limit of memory+Swap usage - memory.failcnt show the number of memory usage hits limits - memory.memsw.failcnt show the number of memory+Swap hits limits - memory.max_usage_in_bytes show max memory usage recorded - memory.memsw.max_usage_in_bytes show max memory+Swap usage recorded - memory.soft_limit_in_bytes set/show soft limit of memory usage - memory.stat show various statistics - memory.use_hierarchy set/show hierarchical account enabled - memory.force_empty trigger forced page reclaim - memory.pressure_level set memory pressure notifications - memory.swappiness set/show swappiness parameter of vmscan - (See sysctl's vm.swappiness) - memory.move_charge_at_immigrate set/show controls of moving charges - memory.oom_control set/show oom controls. - memory.numa_stat show the number of memory usage per numa - node - - memory.kmem.limit_in_bytes set/show hard limit for kernel memory - memory.kmem.usage_in_bytes show current kernel memory allocation - memory.kmem.failcnt show the number of kernel memory usage - hits limits - memory.kmem.max_usage_in_bytes show max kernel memory usage recorded - - memory.kmem.tcp.limit_in_bytes set/show hard limit for tcp buf memory - memory.kmem.tcp.usage_in_bytes show current tcp buf memory allocation - memory.kmem.tcp.failcnt show the number of tcp buf memory usage - hits limits - memory.kmem.tcp.max_usage_in_bytes show max tcp buf memory usage recorded -==================================== ========================================== - -1. History -========== - -The memory controller has a long history. A request for comments for the memory -controller was posted by Balbir Singh [1]. At the time the RFC was posted -there were several implementations for memory control. The goal of the -RFC was to build consensus and agreement for the minimal features required -for memory control. The first RSS controller was posted by Balbir Singh[2] -in Feb 2007. Pavel Emelianov [3][4][5] has since posted three versions of the -RSS controller. At OLS, at the resource management BoF, everyone suggested -that we handle both page cache and RSS together. Another request was raised -to allow user space handling of OOM. The current memory controller is -at version 6; it combines both mapped (RSS) and unmapped Page -Cache Control [11]. - -2. Memory Control -================= - -Memory is a unique resource in the sense that it is present in a limited -amount. If a task requires a lot of CPU processing, the task can spread -its processing over a period of hours, days, months or years, but with -memory, the same physical memory needs to be reused to accomplish the task. - -The memory controller implementation has been divided into phases. These -are: - -1. Memory controller -2. mlock(2) controller -3. Kernel user memory accounting and slab control -4. user mappings length controller - -The memory controller is the first controller developed. - -2.1. Design ------------ - -The core of the design is a counter called the page_counter. The -page_counter tracks the current memory usage and limit of the group of -processes associated with the controller. Each cgroup has a memory controller -specific data structure (mem_cgroup) associated with it. - -2.2. Accounting ---------------- - -:: - - +--------------------+ - | mem_cgroup | - | (page_counter) | - +--------------------+ - / ^ \ - / | \ - +---------------+ | +---------------+ - | mm_struct | |.... | mm_struct | - | | | | | - +---------------+ | +---------------+ - | - + --------------+ - | - +---------------+ +------+--------+ - | page +----------> page_cgroup| - | | | | - +---------------+ +---------------+ - - (Figure 1: Hierarchy of Accounting) - - -Figure 1 shows the important aspects of the controller - -1. Accounting happens per cgroup -2. Each mm_struct knows about which cgroup it belongs to -3. Each page has a pointer to the page_cgroup, which in turn knows the - cgroup it belongs to - -The accounting is done as follows: mem_cgroup_charge_common() is invoked to -set up the necessary data structures and check if the cgroup that is being -charged is over its limit. If it is, then reclaim is invoked on the cgroup. -More details can be found in the reclaim section of this document. -If everything goes well, a page meta-data-structure called page_cgroup is -updated. page_cgroup has its own LRU on cgroup. -(*) page_cgroup structure is allocated at boot/memory-hotplug time. - -2.2.1 Accounting details ------------------------- - -All mapped anon pages (RSS) and cache pages (Page Cache) are accounted. -Some pages which are never reclaimable and will not be on the LRU -are not accounted. We just account pages under usual VM management. - -RSS pages are accounted at page_fault unless they've already been accounted -for earlier. A file page will be accounted for as Page Cache when it's -inserted into inode (radix-tree). While it's mapped into the page tables of -processes, duplicate accounting is carefully avoided. - -An RSS page is unaccounted when it's fully unmapped. A PageCache page is -unaccounted when it's removed from radix-tree. Even if RSS pages are fully -unmapped (by kswapd), they may exist as SwapCache in the system until they -are really freed. Such SwapCaches are also accounted. -A swapped-in page is not accounted until it's mapped. - -Note: The kernel does swapin-readahead and reads multiple swaps at once. -This means swapped-in pages may contain pages for other tasks than a task -causing page fault. So, we avoid accounting at swap-in I/O. - -At page migration, accounting information is kept. - -Note: we just account pages-on-LRU because our purpose is to control amount -of used pages; not-on-LRU pages tend to be out-of-control from VM view. - -2.3 Shared Page Accounting --------------------------- - -Shared pages are accounted on the basis of the first touch approach. The -cgroup that first touches a page is accounted for the page. The principle -behind this approach is that a cgroup that aggressively uses a shared -page will eventually get charged for it (once it is uncharged from -the cgroup that brought it in -- this will happen on memory pressure). - -But see section 8.2: when moving a task to another cgroup, its pages may -be recharged to the new cgroup, if move_charge_at_immigrate has been chosen. - -Exception: If CONFIG_MEMCG_SWAP is not used. -When you do swapoff and make swapped-out pages of shmem(tmpfs) to -be backed into memory in force, charges for pages are accounted against the -caller of swapoff rather than the users of shmem. - -2.4 Swap Extension (CONFIG_MEMCG_SWAP) --------------------------------------- - -Swap Extension allows you to record charge for swap. A swapped-in page is -charged back to original page allocator if possible. - -When swap is accounted, following files are added. - - - memory.memsw.usage_in_bytes. - - memory.memsw.limit_in_bytes. - -memsw means memory+swap. Usage of memory+swap is limited by -memsw.limit_in_bytes. - -Example: Assume a system with 4G of swap. A task which allocates 6G of memory -(by mistake) under 2G memory limitation will use all swap. -In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap. -By using the memsw limit, you can avoid system OOM which can be caused by swap -shortage. - -**why 'memory+swap' rather than swap** - -The global LRU(kswapd) can swap out arbitrary pages. Swap-out means -to move account from memory to swap...there is no change in usage of -memory+swap. In other words, when we want to limit the usage of swap without -affecting global LRU, memory+swap limit is better than just limiting swap from -an OS point of view. - -**What happens when a cgroup hits memory.memsw.limit_in_bytes** - -When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out -in this cgroup. Then, swap-out will not be done by cgroup routine and file -caches are dropped. But as mentioned above, global LRU can do swapout memory -from it for sanity of the system's memory management state. You can't forbid -it by cgroup. - -2.5 Reclaim ------------ - -Each cgroup maintains a per cgroup LRU which has the same structure as -global VM. When a cgroup goes over its limit, we first try -to reclaim memory from the cgroup so as to make space for the new -pages that the cgroup has touched. If the reclaim is unsuccessful, -an OOM routine is invoked to select and kill the bulkiest task in the -cgroup. (See 10. OOM Control below.) - -The reclaim algorithm has not been modified for cgroups, except that -pages that are selected for reclaiming come from the per-cgroup LRU -list. - -NOTE: - Reclaim does not work for the root cgroup, since we cannot set any - limits on the root cgroup. - -Note2: - When panic_on_oom is set to "2", the whole system will panic. - -When oom event notifier is registered, event will be delivered. -(See oom_control section) - -2.6 Locking ------------ - - lock_page_cgroup()/unlock_page_cgroup() should not be called under - the i_pages lock. - - Other lock order is following: - - PG_locked. - mm->page_table_lock - pgdat->lru_lock - lock_page_cgroup. - - In many cases, just lock_page_cgroup() is called. - - per-zone-per-cgroup LRU (cgroup's private LRU) is just guarded by - pgdat->lru_lock, it has no lock of its own. - -2.7 Kernel Memory Extension (CONFIG_MEMCG_KMEM) ------------------------------------------------ - -With the Kernel memory extension, the Memory Controller is able to limit -the amount of kernel memory used by the system. Kernel memory is fundamentally -different than user memory, since it can't be swapped out, which makes it -possible to DoS the system by consuming too much of this precious resource. - -Kernel memory accounting is enabled for all memory cgroups by default. But -it can be disabled system-wide by passing cgroup.memory=nokmem to the kernel -at boot time. In this case, kernel memory will not be accounted at all. - -Kernel memory limits are not imposed for the root cgroup. Usage for the root -cgroup may or may not be accounted. The memory used is accumulated into -memory.kmem.usage_in_bytes, or in a separate counter when it makes sense. -(currently only for tcp). - -The main "kmem" counter is fed into the main counter, so kmem charges will -also be visible from the user counter. - -Currently no soft limit is implemented for kernel memory. It is future work -to trigger slab reclaim when those limits are reached. - -2.7.1 Current Kernel Memory resources accounted ------------------------------------------------ - -stack pages: - every process consumes some stack pages. By accounting into - kernel memory, we prevent new processes from being created when the kernel - memory usage is too high. - -slab pages: - pages allocated by the SLAB or SLUB allocator are tracked. A copy - of each kmem_cache is created every time the cache is touched by the first time - from inside the memcg. The creation is done lazily, so some objects can still be - skipped while the cache is being created. All objects in a slab page should - belong to the same memcg. This only fails to hold when a task is migrated to a - different memcg during the page allocation by the cache. - -sockets memory pressure: - some sockets protocols have memory pressure - thresholds. The Memory Controller allows them to be controlled individually - per cgroup, instead of globally. - -tcp memory pressure: - sockets memory pressure for the tcp protocol. - -2.7.2 Common use cases ----------------------- - -Because the "kmem" counter is fed to the main user counter, kernel memory can -never be limited completely independently of user memory. Say "U" is the user -limit, and "K" the kernel limit. There are three possible ways limits can be -set: - -U != 0, K = unlimited: - This is the standard memcg limitation mechanism already present before kmem - accounting. Kernel memory is completely ignored. - -U != 0, K < U: - Kernel memory is a subset of the user memory. This setup is useful in - deployments where the total amount of memory per-cgroup is overcommited. - Overcommiting kernel memory limits is definitely not recommended, since the - box can still run out of non-reclaimable memory. - In this case, the admin could set up K so that the sum of all groups is - never greater than the total memory, and freely set U at the cost of his - QoS. - -WARNING: - In the current implementation, memory reclaim will NOT be - triggered for a cgroup when it hits K while staying below U, which makes - this setup impractical. - -U != 0, K >= U: - Since kmem charges will also be fed to the user counter and reclaim will be - triggered for the cgroup for both kinds of memory. This setup gives the - admin a unified view of memory, and it is also useful for people who just - want to track kernel memory usage. - -3. User Interface -================= - -3.0. Configuration ------------------- - -a. Enable CONFIG_CGROUPS -b. Enable CONFIG_MEMCG -c. Enable CONFIG_MEMCG_SWAP (to use swap extension) -d. Enable CONFIG_MEMCG_KMEM (to use kmem extension) - -3.1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?) -------------------------------------------------------------------- - -:: - - # mount -t tmpfs none /sys/fs/cgroup - # mkdir /sys/fs/cgroup/memory - # mount -t cgroup none /sys/fs/cgroup/memory -o memory - -3.2. Make the new group and move bash into it:: - - # mkdir /sys/fs/cgroup/memory/0 - # echo $$ > /sys/fs/cgroup/memory/0/tasks - -Since now we're in the 0 cgroup, we can alter the memory limit:: - - # echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes - -NOTE: - We can use a suffix (k, K, m, M, g or G) to indicate values in kilo, - mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, - Gibibytes.) - -NOTE: - We can write "-1" to reset the ``*.limit_in_bytes(unlimited)``. - -NOTE: - We cannot set limits on the root cgroup any more. - -:: - - # cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes - 4194304 - -We can check the usage:: - - # cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes - 1216512 - -A successful write to this file does not guarantee a successful setting of -this limit to the value written into the file. This can be due to a -number of factors, such as rounding up to page boundaries or the total -availability of memory on the system. The user is required to re-read -this file after a write to guarantee the value committed by the kernel:: - - # echo 1 > memory.limit_in_bytes - # cat memory.limit_in_bytes - 4096 - -The memory.failcnt field gives the number of times that the cgroup limit was -exceeded. - -The memory.stat file gives accounting information. Now, the number of -caches, RSS and Active pages/Inactive pages are shown. - -4. Testing -========== - -For testing features and implementation, see memcg_test.txt. - -Performance test is also important. To see pure memory controller's overhead, -testing on tmpfs will give you good numbers of small overheads. -Example: do kernel make on tmpfs. - -Page-fault scalability is also important. At measuring parallel -page fault test, multi-process test may be better than multi-thread -test because it has noise of shared objects/status. - -But the above two are testing extreme situations. -Trying usual test under memory controller is always helpful. - -4.1 Troubleshooting -------------------- - -Sometimes a user might find that the application under a cgroup is -terminated by the OOM killer. There are several causes for this: - -1. The cgroup limit is too low (just too low to do anything useful) -2. The user is using anonymous memory and swap is turned off or too low - -A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of -some of the pages cached in the cgroup (page cache pages). - -To know what happens, disabling OOM_Kill as per "10. OOM Control" (below) and -seeing what happens will be helpful. - -4.2 Task migration ------------------- - -When a task migrates from one cgroup to another, its charge is not -carried forward by default. The pages allocated from the original cgroup still -remain charged to it, the charge is dropped when the page is freed or -reclaimed. - -You can move charges of a task along with task migration. -See 8. "Move charges at task migration" - -4.3 Removing a cgroup ---------------------- - -A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a -cgroup might have some charge associated with it, even though all -tasks have migrated away from it. (because we charge against pages, not -against tasks.) - -We move the stats to root (if use_hierarchy==0) or parent (if -use_hierarchy==1), and no change on the charge except uncharging -from the child. - -Charges recorded in swap information is not updated at removal of cgroup. -Recorded information is discarded and a cgroup which uses swap (swapcache) -will be charged as a new owner of it. - -About use_hierarchy, see Section 6. - -5. Misc. interfaces -=================== - -5.1 force_empty ---------------- - memory.force_empty interface is provided to make cgroup's memory usage empty. - When writing anything to this:: - - # echo 0 > memory.force_empty - - the cgroup will be reclaimed and as many pages reclaimed as possible. - - The typical use case for this interface is before calling rmdir(). - Though rmdir() offlines memcg, but the memcg may still stay there due to - charged file caches. Some out-of-use page caches may keep charged until - memory pressure happens. If you want to avoid that, force_empty will be useful. - - Also, note that when memory.kmem.limit_in_bytes is set the charges due to - kernel pages will still be seen. This is not considered a failure and the - write will still return success. In this case, it is expected that - memory.kmem.usage_in_bytes == memory.usage_in_bytes. - - About use_hierarchy, see Section 6. - -5.2 stat file -------------- - -memory.stat file includes following statistics - -per-memory cgroup local status -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -=============== =============================================================== -cache # of bytes of page cache memory. -rss # of bytes of anonymous and swap cache memory (includes - transparent hugepages). -rss_huge # of bytes of anonymous transparent hugepages. -mapped_file # of bytes of mapped file (includes tmpfs/shmem) -pgpgin # of charging events to the memory cgroup. The charging - event happens each time a page is accounted as either mapped - anon page(RSS) or cache page(Page Cache) to the cgroup. -pgpgout # of uncharging events to the memory cgroup. The uncharging - event happens each time a page is unaccounted from the cgroup. -swap # of bytes of swap usage -dirty # of bytes that are waiting to get written back to the disk. -writeback # of bytes of file/anon cache that are queued for syncing to - disk. -inactive_anon # of bytes of anonymous and swap cache memory on inactive - LRU list. -active_anon # of bytes of anonymous and swap cache memory on active - LRU list. -inactive_file # of bytes of file-backed memory on inactive LRU list. -active_file # of bytes of file-backed memory on active LRU list. -unevictable # of bytes of memory that cannot be reclaimed (mlocked etc). -=============== =============================================================== - -status considering hierarchy (see memory.use_hierarchy settings) -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -========================= =================================================== -hierarchical_memory_limit # of bytes of memory limit with regard to hierarchy - under which the memory cgroup is -hierarchical_memsw_limit # of bytes of memory+swap limit with regard to - hierarchy under which memory cgroup is. - -total_ # hierarchical version of , which in - addition to the cgroup's own value includes the - sum of all hierarchical children's values of - , i.e. total_cache -========================= =================================================== - -The following additional stats are dependent on CONFIG_DEBUG_VM -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -========================= ======================================== -recent_rotated_anon VM internal parameter. (see mm/vmscan.c) -recent_rotated_file VM internal parameter. (see mm/vmscan.c) -recent_scanned_anon VM internal parameter. (see mm/vmscan.c) -recent_scanned_file VM internal parameter. (see mm/vmscan.c) -========================= ======================================== - -Memo: - recent_rotated means recent frequency of LRU rotation. - recent_scanned means recent # of scans to LRU. - showing for better debug please see the code for meanings. - -Note: - Only anonymous and swap cache memory is listed as part of 'rss' stat. - This should not be confused with the true 'resident set size' or the - amount of physical memory used by the cgroup. - - 'rss + mapped_file" will give you resident set size of cgroup. - - (Note: file and shmem may be shared among other cgroups. In that case, - mapped_file is accounted only when the memory cgroup is owner of page - cache.) - -5.3 swappiness --------------- - -Overrides /proc/sys/vm/swappiness for the particular group. The tunable -in the root cgroup corresponds to the global swappiness setting. - -Please note that unlike during the global reclaim, limit reclaim -enforces that 0 swappiness really prevents from any swapping even if -there is a swap storage available. This might lead to memcg OOM killer -if there are no file pages to reclaim. - -5.4 failcnt ------------ - -A memory cgroup provides memory.failcnt and memory.memsw.failcnt files. -This failcnt(== failure count) shows the number of times that a usage counter -hit its limit. When a memory cgroup hits a limit, failcnt increases and -memory under it will be reclaimed. - -You can reset failcnt by writing 0 to failcnt file:: - - # echo 0 > .../memory.failcnt - -5.5 usage_in_bytes ------------------- - -For efficiency, as other kernel components, memory cgroup uses some optimization -to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the -method and doesn't show 'exact' value of memory (and swap) usage, it's a fuzz -value for efficient access. (Of course, when necessary, it's synchronized.) -If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP) -value in memory.stat(see 5.2). - -5.6 numa_stat -------------- - -This is similar to numa_maps but operates on a per-memcg basis. This is -useful for providing visibility into the numa locality information within -an memcg since the pages are allowed to be allocated from any physical -node. One of the use cases is evaluating application performance by -combining this information with the application's CPU allocation. - -Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable" -per-node page counts including "hierarchical_" which sums up all -hierarchical children's values in addition to the memcg's own value. - -The output format of memory.numa_stat is:: - - total= N0= N1= ... - file= N0= N1= ... - anon= N0= N1= ... - unevictable= N0= N1= ... - hierarchical_= N0= N1= ... - -The "total" count is sum of file + anon + unevictable. - -6. Hierarchy support -==================== - -The memory controller supports a deep hierarchy and hierarchical accounting. -The hierarchy is created by creating the appropriate cgroups in the -cgroup filesystem. Consider for example, the following cgroup filesystem -hierarchy:: - - root - / | \ - / | \ - a b c - | \ - | \ - d e - -In the diagram above, with hierarchical accounting enabled, all memory -usage of e, is accounted to its ancestors up until the root (i.e, c and root), -that has memory.use_hierarchy enabled. If one of the ancestors goes over its -limit, the reclaim algorithm reclaims from the tasks in the ancestor and the -children of the ancestor. - -6.1 Enabling hierarchical accounting and reclaim ------------------------------------------------- - -A memory cgroup by default disables the hierarchy feature. Support -can be enabled by writing 1 to memory.use_hierarchy file of the root cgroup:: - - # echo 1 > memory.use_hierarchy - -The feature can be disabled by:: - - # echo 0 > memory.use_hierarchy - -NOTE1: - Enabling/disabling will fail if either the cgroup already has other - cgroups created below it, or if the parent cgroup has use_hierarchy - enabled. - -NOTE2: - When panic_on_oom is set to "2", the whole system will panic in - case of an OOM event in any cgroup. - -7. Soft limits -============== - -Soft limits allow for greater sharing of memory. The idea behind soft limits -is to allow control groups to use as much of the memory as needed, provided - -a. There is no memory contention -b. They do not exceed their hard limit - -When the system detects memory contention or low memory, control groups -are pushed back to their soft limits. If the soft limit of each control -group is very high, they are pushed back as much as possible to make -sure that one control group does not starve the others of memory. - -Please note that soft limits is a best-effort feature; it comes with -no guarantees, but it does its best to make sure that when memory is -heavily contended for, memory is allocated based on the soft limit -hints/setup. Currently soft limit based reclaim is set up such that -it gets invoked from balance_pgdat (kswapd). - -7.1 Interface -------------- - -Soft limits can be setup by using the following commands (in this example we -assume a soft limit of 256 MiB):: - - # echo 256M > memory.soft_limit_in_bytes - -If we want to change this to 1G, we can at any time use:: - - # echo 1G > memory.soft_limit_in_bytes - -NOTE1: - Soft limits take effect over a long period of time, since they involve - reclaiming memory for balancing between memory cgroups -NOTE2: - It is recommended to set the soft limit always below the hard limit, - otherwise the hard limit will take precedence. - -8. Move charges at task migration -================================= - -Users can move charges associated with a task along with task migration, that -is, uncharge task's pages from the old cgroup and charge them to the new cgroup. -This feature is not supported in !CONFIG_MMU environments because of lack of -page tables. - -8.1 Interface -------------- - -This feature is disabled by default. It can be enabled (and disabled again) by -writing to memory.move_charge_at_immigrate of the destination cgroup. - -If you want to enable it:: - - # echo (some positive value) > memory.move_charge_at_immigrate - -Note: - Each bits of move_charge_at_immigrate has its own meaning about what type - of charges should be moved. See 8.2 for details. -Note: - Charges are moved only when you move mm->owner, in other words, - a leader of a thread group. -Note: - If we cannot find enough space for the task in the destination cgroup, we - try to make space by reclaiming memory. Task migration may fail if we - cannot make enough space. -Note: - It can take several seconds if you move charges much. - -And if you want disable it again:: - - # echo 0 > memory.move_charge_at_immigrate - -8.2 Type of charges which can be moved --------------------------------------- - -Each bit in move_charge_at_immigrate has its own meaning about what type of -charges should be moved. But in any case, it must be noted that an account of -a page or a swap can be moved only when it is charged to the task's current -(old) memory cgroup. - -+---+--------------------------------------------------------------------------+ -|bit| what type of charges would be moved ? | -+===+==========================================================================+ -| 0 | A charge of an anonymous page (or swap of it) used by the target task. | -| | You must enable Swap Extension (see 2.4) to enable move of swap charges. | -+---+--------------------------------------------------------------------------+ -| 1 | A charge of file pages (normal file, tmpfs file (e.g. ipc shared memory) | -| | and swaps of tmpfs file) mmapped by the target task. Unlike the case of | -| | anonymous pages, file pages (and swaps) in the range mmapped by the task | -| | will be moved even if the task hasn't done page fault, i.e. they might | -| | not be the task's "RSS", but other task's "RSS" that maps the same file. | -| | And mapcount of the page is ignored (the page can be moved even if | -| | page_mapcount(page) > 1). You must enable Swap Extension (see 2.4) to | -| | enable move of swap charges. | -+---+--------------------------------------------------------------------------+ - -8.3 TODO --------- - -- All of moving charge operations are done under cgroup_mutex. It's not good - behavior to hold the mutex too long, so we may need some trick. - -9. Memory thresholds -==================== - -Memory cgroup implements memory thresholds using the cgroups notification -API (see cgroups.txt). It allows to register multiple memory and memsw -thresholds and gets notifications when it crosses. - -To register a threshold, an application must: - -- create an eventfd using eventfd(2); -- open memory.usage_in_bytes or memory.memsw.usage_in_bytes; -- write string like " " to - cgroup.event_control. - -Application will be notified through eventfd when memory usage crosses -threshold in any direction. - -It's applicable for root and non-root cgroup. - -10. OOM Control -=============== - -memory.oom_control file is for OOM notification and other controls. - -Memory cgroup implements OOM notifier using the cgroup notification -API (See cgroups.txt). It allows to register multiple OOM notification -delivery and gets notification when OOM happens. - -To register a notifier, an application must: - - - create an eventfd using eventfd(2) - - open memory.oom_control file - - write string like " " to - cgroup.event_control - -The application will be notified through eventfd when OOM happens. -OOM notification doesn't work for the root cgroup. - -You can disable the OOM-killer by writing "1" to memory.oom_control file, as: - - #echo 1 > memory.oom_control - -If OOM-killer is disabled, tasks under cgroup will hang/sleep -in memory cgroup's OOM-waitqueue when they request accountable memory. - -For running them, you have to relax the memory cgroup's OOM status by - - * enlarge limit or reduce usage. - -To reduce usage, - - * kill some tasks. - * move some tasks to other group with account migration. - * remove some files (on tmpfs?) - -Then, stopped tasks will work again. - -At reading, current status of OOM is shown. - - - oom_kill_disable 0 or 1 - (if 1, oom-killer is disabled) - - under_oom 0 or 1 - (if 1, the memory cgroup is under OOM, tasks may be stopped.) - -11. Memory Pressure -=================== - -The pressure level notifications can be used to monitor the memory -allocation cost; based on the pressure, applications can implement -different strategies of managing their memory resources. The pressure -levels are defined as following: - -The "low" level means that the system is reclaiming memory for new -allocations. Monitoring this reclaiming activity might be useful for -maintaining cache level. Upon notification, the program (typically -"Activity Manager") might analyze vmstat and act in advance (i.e. -prematurely shutdown unimportant services). - -The "medium" level means that the system is experiencing medium memory -pressure, the system might be making swap, paging out active file caches, -etc. Upon this event applications may decide to further analyze -vmstat/zoneinfo/memcg or internal memory usage statistics and free any -resources that can be easily reconstructed or re-read from a disk. - -The "critical" level means that the system is actively thrashing, it is -about to out of memory (OOM) or even the in-kernel OOM killer is on its -way to trigger. Applications should do whatever they can to help the -system. It might be too late to consult with vmstat or any other -statistics, so it's advisable to take an immediate action. - -By default, events are propagated upward until the event is handled, i.e. the -events are not pass-through. For example, you have three cgroups: A->B->C. Now -you set up an event listener on cgroups A, B and C, and suppose group C -experiences some pressure. In this situation, only group C will receive the -notification, i.e. groups A and B will not receive it. This is done to avoid -excessive "broadcasting" of messages, which disturbs the system and which is -especially bad if we are low on memory or thrashing. Group B, will receive -notification only if there are no event listers for group C. - -There are three optional modes that specify different propagation behavior: - - - "default": this is the default behavior specified above. This mode is the - same as omitting the optional mode parameter, preserved by backwards - compatibility. - - - "hierarchy": events always propagate up to the root, similar to the default - behavior, except that propagation continues regardless of whether there are - event listeners at each level, with the "hierarchy" mode. In the above - example, groups A, B, and C will receive notification of memory pressure. - - - "local": events are pass-through, i.e. they only receive notifications when - memory pressure is experienced in the memcg for which the notification is - registered. In the above example, group C will receive notification if - registered for "local" notification and the group experiences memory - pressure. However, group B will never receive notification, regardless if - there is an event listener for group C or not, if group B is registered for - local notification. - -The level and event notification mode ("hierarchy" or "local", if necessary) are -specified by a comma-delimited string, i.e. "low,hierarchy" specifies -hierarchical, pass-through, notification for all ancestor memcgs. Notification -that is the default, non pass-through behavior, does not specify a mode. -"medium,local" specifies pass-through notification for the medium level. - -The file memory.pressure_level is only used to setup an eventfd. To -register a notification, an application must: - -- create an eventfd using eventfd(2); -- open memory.pressure_level; -- write string as " " - to cgroup.event_control. - -Application will be notified through eventfd when memory pressure is at -the specific level (or higher). Read/write operations to -memory.pressure_level are no implemented. - -Test: - - Here is a small script example that makes a new cgroup, sets up a - memory limit, sets up a notification in the cgroup and then makes child - cgroup experience a critical pressure:: - - # cd /sys/fs/cgroup/memory/ - # mkdir foo - # cd foo - # cgroup_event_listener memory.pressure_level low,hierarchy & - # echo 8000000 > memory.limit_in_bytes - # echo 8000000 > memory.memsw.limit_in_bytes - # echo $$ > tasks - # dd if=/dev/zero | read x - - (Expect a bunch of notifications, and eventually, the oom-killer will - trigger.) - -12. TODO -======== - -1. Make per-cgroup scanner reclaim not-shared pages first -2. Teach controller to account for shared-pages -3. Start reclamation in the background when the limit is - not yet hit but the usage is getting closer - -Summary -======= - -Overall, the memory controller has been a stable controller and has been -commented and discussed quite extensively in the community. - -References -========== - -1. Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/ -2. Singh, Balbir. Memory Controller (RSS Control), - http://lwn.net/Articles/222762/ -3. Emelianov, Pavel. Resource controllers based on process cgroups - http://lkml.org/lkml/2007/3/6/198 -4. Emelianov, Pavel. RSS controller based on process cgroups (v2) - http://lkml.org/lkml/2007/4/9/78 -5. Emelianov, Pavel. RSS controller based on process cgroups (v3) - http://lkml.org/lkml/2007/5/30/244 -6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/ -7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control - subsystem (v3), http://lwn.net/Articles/235534/ -8. Singh, Balbir. RSS controller v2 test results (lmbench), - http://lkml.org/lkml/2007/5/17/232 -9. Singh, Balbir. RSS controller v2 AIM9 results - http://lkml.org/lkml/2007/5/18/1 -10. Singh, Balbir. Memory controller v6 test results, - http://lkml.org/lkml/2007/8/19/36 -11. Singh, Balbir. Memory controller introduction (v6), - http://lkml.org/lkml/2007/8/17/69 -12. Corbet, Jonathan, Controlling memory use in cgroups, - http://lwn.net/Articles/243795/ diff --git a/Documentation/cgroup-v1/net_cls.rst b/Documentation/cgroup-v1/net_cls.rst deleted file mode 100644 index a2cf272af7a0..000000000000 --- a/Documentation/cgroup-v1/net_cls.rst +++ /dev/null @@ -1,44 +0,0 @@ -========================= -Network classifier cgroup -========================= - -The Network classifier cgroup provides an interface to -tag network packets with a class identifier (classid). - -The Traffic Controller (tc) can be used to assign -different priorities to packets from different cgroups. -Also, Netfilter (iptables) can use this tag to perform -actions on such packets. - -Creating a net_cls cgroups instance creates a net_cls.classid file. -This net_cls.classid value is initialized to 0. - -You can write hexadecimal values to net_cls.classid; the format for these -values is 0xAAAABBBB; AAAA is the major handle number and BBBB -is the minor handle number. -Reading net_cls.classid yields a decimal result. - -Example:: - - mkdir /sys/fs/cgroup/net_cls - mount -t cgroup -onet_cls net_cls /sys/fs/cgroup/net_cls - mkdir /sys/fs/cgroup/net_cls/0 - echo 0x100001 > /sys/fs/cgroup/net_cls/0/net_cls.classid - -- setting a 10:1 handle:: - - cat /sys/fs/cgroup/net_cls/0/net_cls.classid - 1048577 - -- configuring tc:: - - tc qdisc add dev eth0 root handle 10: htb - tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit - -- creating traffic class 10:1:: - - tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup - -configuring iptables, basic example:: - - iptables -A OUTPUT -m cgroup ! --cgroup 0x100001 -j DROP diff --git a/Documentation/cgroup-v1/net_prio.rst b/Documentation/cgroup-v1/net_prio.rst deleted file mode 100644 index b40905871c64..000000000000 --- a/Documentation/cgroup-v1/net_prio.rst +++ /dev/null @@ -1,57 +0,0 @@ -======================= -Network priority cgroup -======================= - -The Network priority cgroup provides an interface to allow an administrator to -dynamically set the priority of network traffic generated by various -applications - -Nominally, an application would set the priority of its traffic via the -SO_PRIORITY socket option. This however, is not always possible because: - -1) The application may not have been coded to set this value -2) The priority of application traffic is often a site-specific administrative - decision rather than an application defined one. - -This cgroup allows an administrator to assign a process to a group which defines -the priority of egress traffic on a given interface. Network priority groups can -be created by first mounting the cgroup filesystem:: - - # mount -t cgroup -onet_prio none /sys/fs/cgroup/net_prio - -With the above step, the initial group acting as the parent accounting group -becomes visible at '/sys/fs/cgroup/net_prio'. This group includes all tasks in -the system. '/sys/fs/cgroup/net_prio/tasks' lists the tasks in this cgroup. - -Each net_prio cgroup contains two files that are subsystem specific - -net_prio.prioidx - This file is read-only, and is simply informative. It contains a unique - integer value that the kernel uses as an internal representation of this - cgroup. - -net_prio.ifpriomap - This file contains a map of the priorities assigned to traffic originating - from processes in this group and egressing the system on various interfaces. - It contains a list of tuples in the form . Contents of this - file can be modified by echoing a string into the file using the same tuple - format. For example:: - - echo "eth0 5" > /sys/fs/cgroups/net_prio/iscsi/net_prio.ifpriomap - -This command would force any traffic originating from processes belonging to the -iscsi net_prio cgroup and egressing on interface eth0 to have the priority of -said traffic set to the value 5. The parent accounting group also has a -writeable 'net_prio.ifpriomap' file that can be used to set a system default -priority. - -Priorities are set immediately prior to queueing a frame to the device -queueing discipline (qdisc) so priorities will be assigned prior to the hardware -queue selection being made. - -One usage for the net_prio cgroup is with mqprio qdisc allowing application -traffic to be steered to hardware/driver based traffic classes. These mappings -can then be managed by administrators or other networking protocols such as -DCBX. - -A new net_prio cgroup inherits the parent's configuration. diff --git a/Documentation/cgroup-v1/pids.rst b/Documentation/cgroup-v1/pids.rst deleted file mode 100644 index 6acebd9e72c8..000000000000 --- a/Documentation/cgroup-v1/pids.rst +++ /dev/null @@ -1,92 +0,0 @@ -========================= -Process Number Controller -========================= - -Abstract --------- - -The process number controller is used to allow a cgroup hierarchy to stop any -new tasks from being fork()'d or clone()'d after a certain limit is reached. - -Since it is trivial to hit the task limit without hitting any kmemcg limits in -place, PIDs are a fundamental resource. As such, PID exhaustion must be -preventable in the scope of a cgroup hierarchy by allowing resource limiting of -the number of tasks in a cgroup. - -Usage ------ - -In order to use the `pids` controller, set the maximum number of tasks in -pids.max (this is not available in the root cgroup for obvious reasons). The -number of processes currently in the cgroup is given by pids.current. - -Organisational operations are not blocked by cgroup policies, so it is possible -to have pids.current > pids.max. This can be done by either setting the limit to -be smaller than pids.current, or attaching enough processes to the cgroup such -that pids.current > pids.max. However, it is not possible to violate a cgroup -policy through fork() or clone(). fork() and clone() will return -EAGAIN if the -creation of a new process would cause a cgroup policy to be violated. - -To set a cgroup to have no limit, set pids.max to "max". This is the default for -all new cgroups (N.B. that PID limits are hierarchical, so the most stringent -limit in the hierarchy is followed). - -pids.current tracks all child cgroup hierarchies, so parent/pids.current is a -superset of parent/child/pids.current. - -The pids.events file contains event counters: - - - max: Number of times fork failed because limit was hit. - -Example -------- - -First, we mount the pids controller:: - - # mkdir -p /sys/fs/cgroup/pids - # mount -t cgroup -o pids none /sys/fs/cgroup/pids - -Then we create a hierarchy, set limits and attach processes to it:: - - # mkdir -p /sys/fs/cgroup/pids/parent/child - # echo 2 > /sys/fs/cgroup/pids/parent/pids.max - # echo $$ > /sys/fs/cgroup/pids/parent/cgroup.procs - # cat /sys/fs/cgroup/pids/parent/pids.current - 2 - # - -It should be noted that attempts to overcome the set limit (2 in this case) will -fail:: - - # cat /sys/fs/cgroup/pids/parent/pids.current - 2 - # ( /bin/echo "Here's some processes for you." | cat ) - sh: fork: Resource temporary unavailable - # - -Even if we migrate to a child cgroup (which doesn't have a set limit), we will -not be able to overcome the most stringent limit in the hierarchy (in this case, -parent's):: - - # echo $$ > /sys/fs/cgroup/pids/parent/child/cgroup.procs - # cat /sys/fs/cgroup/pids/parent/pids.current - 2 - # cat /sys/fs/cgroup/pids/parent/child/pids.current - 2 - # cat /sys/fs/cgroup/pids/parent/child/pids.max - max - # ( /bin/echo "Here's some processes for you." | cat ) - sh: fork: Resource temporary unavailable - # - -We can set a limit that is smaller than pids.current, which will stop any new -processes from being forked at all (note that the shell itself counts towards -pids.current):: - - # echo 1 > /sys/fs/cgroup/pids/parent/pids.max - # /bin/echo "We can't even spawn a single process now." - sh: fork: Resource temporary unavailable - # echo 0 > /sys/fs/cgroup/pids/parent/pids.max - # /bin/echo "We can't even spawn a single process now." - sh: fork: Resource temporary unavailable - # diff --git a/Documentation/cgroup-v1/rdma.rst b/Documentation/cgroup-v1/rdma.rst deleted file mode 100644 index 2fcb0a9bf790..000000000000 --- a/Documentation/cgroup-v1/rdma.rst +++ /dev/null @@ -1,117 +0,0 @@ -=============== -RDMA Controller -=============== - -.. Contents - - 1. Overview - 1-1. What is RDMA controller? - 1-2. Why RDMA controller needed? - 1-3. How is RDMA controller implemented? - 2. Usage Examples - -1. Overview -=========== - -1-1. What is RDMA controller? ------------------------------ - -RDMA controller allows user to limit RDMA/IB specific resources that a given -set of processes can use. These processes are grouped using RDMA controller. - -RDMA controller defines two resources which can be limited for processes of a -cgroup. - -1-2. Why RDMA controller needed? --------------------------------- - -Currently user space applications can easily take away all the rdma verb -specific resources such as AH, CQ, QP, MR etc. Due to which other applications -in other cgroup or kernel space ULPs may not even get chance to allocate any -rdma resources. This can lead to service unavailability. - -Therefore RDMA controller is needed through which resource consumption -of processes can be limited. Through this controller different rdma -resources can be accounted. - -1-3. How is RDMA controller implemented? ----------------------------------------- - -RDMA cgroup allows limit configuration of resources. Rdma cgroup maintains -resource accounting per cgroup, per device using resource pool structure. -Each such resource pool is limited up to 64 resources in given resource pool -by rdma cgroup, which can be extended later if required. - -This resource pool object is linked to the cgroup css. Typically there -are 0 to 4 resource pool instances per cgroup, per device in most use cases. -But nothing limits to have it more. At present hundreds of RDMA devices per -single cgroup may not be handled optimally, however there is no -known use case or requirement for such configuration either. - -Since RDMA resources can be allocated from any process and can be freed by any -of the child processes which shares the address space, rdma resources are -always owned by the creator cgroup css. This allows process migration from one -to other cgroup without major complexity of transferring resource ownership; -because such ownership is not really present due to shared nature of -rdma resources. Linking resources around css also ensures that cgroups can be -deleted after processes migrated. This allow progress migration as well with -active resources, even though that is not a primary use case. - -Whenever RDMA resource charging occurs, owner rdma cgroup is returned to -the caller. Same rdma cgroup should be passed while uncharging the resource. -This also allows process migrated with active RDMA resource to charge -to new owner cgroup for new resource. It also allows to uncharge resource of -a process from previously charged cgroup which is migrated to new cgroup, -even though that is not a primary use case. - -Resource pool object is created in following situations. -(a) User sets the limit and no previous resource pool exist for the device -of interest for the cgroup. -(b) No resource limits were configured, but IB/RDMA stack tries to -charge the resource. So that it correctly uncharge them when applications are -running without limits and later on when limits are enforced during uncharging, -otherwise usage count will drop to negative. - -Resource pool is destroyed if all the resource limits are set to max and -it is the last resource getting deallocated. - -User should set all the limit to max value if it intents to remove/unconfigure -the resource pool for a particular device. - -IB stack honors limits enforced by the rdma controller. When application -query about maximum resource limits of IB device, it returns minimum of -what is configured by user for a given cgroup and what is supported by -IB device. - -Following resources can be accounted by rdma controller. - - ========== ============================= - hca_handle Maximum number of HCA Handles - hca_object Maximum number of HCA Objects - ========== ============================= - -2. Usage Examples -================= - -(a) Configure resource limit:: - - echo mlx4_0 hca_handle=2 hca_object=2000 > /sys/fs/cgroup/rdma/1/rdma.max - echo ocrdma1 hca_handle=3 > /sys/fs/cgroup/rdma/2/rdma.max - -(b) Query resource limit:: - - cat /sys/fs/cgroup/rdma/2/rdma.max - #Output: - mlx4_0 hca_handle=2 hca_object=2000 - ocrdma1 hca_handle=3 hca_object=max - -(c) Query current usage:: - - cat /sys/fs/cgroup/rdma/2/rdma.current - #Output: - mlx4_0 hca_handle=1 hca_object=20 - ocrdma1 hca_handle=1 hca_object=23 - -(d) Delete resource limit:: - - echo echo mlx4_0 hca_handle=max hca_object=max > /sys/fs/cgroup/rdma/1/rdma.max diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt index cad797a8a39e..5ecbc03e6b2f 100644 --- a/Documentation/filesystems/tmpfs.txt +++ b/Documentation/filesystems/tmpfs.txt @@ -98,7 +98,7 @@ A memory policy with a valid NodeList will be saved, as specified, for use at file creation time. When a task allocates a file in the file system, the mount option memory policy will be applied with a NodeList, if any, modified by the calling task's cpuset constraints -[See Documentation/cgroup-v1/cpusets.rst] and any optional flags, listed +[See Documentation/admin-guide/cgroup-v1/cpusets.rst] and any optional flags, listed below. If the resulting NodeLists is the empty set, the effective memory policy for the file will revert to "default" policy. diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt index 5623b9916411..4f18456dd3b1 100644 --- a/Documentation/kernel-per-CPU-kthreads.txt +++ b/Documentation/kernel-per-CPU-kthreads.txt @@ -12,7 +12,7 @@ References - Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs. -- Documentation/cgroup-v1: Using cgroups to bind tasks to sets of CPUs. +- Documentation/admin-guide/cgroup-v1: Using cgroups to bind tasks to sets of CPUs. - man taskset: Using the taskset command to bind tasks to sets of CPUs. diff --git a/Documentation/scheduler/sched-deadline.rst b/Documentation/scheduler/sched-deadline.rst index 3391e86d810c..14a2f7bf63fe 100644 --- a/Documentation/scheduler/sched-deadline.rst +++ b/Documentation/scheduler/sched-deadline.rst @@ -669,7 +669,7 @@ Deadline Task Scheduling -deadline tasks cannot have an affinity mask smaller that the entire root_domain they are created on. However, affinities can be specified - through the cpuset facility (Documentation/cgroup-v1/cpusets.rst). + through the cpuset facility (Documentation/admin-guide/cgroup-v1/cpusets.rst). 5.1 SCHED_DEADLINE and cpusets HOWTO ------------------------------------ diff --git a/Documentation/scheduler/sched-design-CFS.rst b/Documentation/scheduler/sched-design-CFS.rst index 53b30d1967cf..a96c72651877 100644 --- a/Documentation/scheduler/sched-design-CFS.rst +++ b/Documentation/scheduler/sched-design-CFS.rst @@ -222,7 +222,7 @@ SCHED_BATCH) tasks. These options need CONFIG_CGROUPS to be defined, and let the administrator create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See - Documentation/cgroup-v1/cgroups.rst for more information about this filesystem. + Documentation/admin-guide/cgroup-v1/cgroups.rst for more information about this filesystem. When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each group created using the pseudo filesystem. See example steps below to create diff --git a/Documentation/scheduler/sched-rt-group.rst b/Documentation/scheduler/sched-rt-group.rst index d27d3f3712fd..655a096ec8fb 100644 --- a/Documentation/scheduler/sched-rt-group.rst +++ b/Documentation/scheduler/sched-rt-group.rst @@ -133,7 +133,7 @@ This uses the cgroup virtual file system and "/cpu.rt_runtime_us" to control the CPU time reserved for each control group. For more information on working with control groups, you should read -Documentation/cgroup-v1/cgroups.rst as well. +Documentation/admin-guide/cgroup-v1/cgroups.rst as well. Group settings are checked against the following limits in order to keep the configuration schedulable: diff --git a/Documentation/vm/numa.rst b/Documentation/vm/numa.rst index 130f3cfa1c19..99fdeca917ca 100644 --- a/Documentation/vm/numa.rst +++ b/Documentation/vm/numa.rst @@ -67,7 +67,7 @@ nodes. Each emulated node will manage a fraction of the underlying cells' physical memory. NUMA emluation is useful for testing NUMA kernel and application features on non-NUMA platforms, and as a sort of memory resource management mechanism when used together with cpusets. -[see Documentation/cgroup-v1/cpusets.rst] +[see Documentation/admin-guide/cgroup-v1/cpusets.rst] For each node with memory, Linux constructs an independent memory management subsystem, complete with its own free page lists, in-use page lists, usage @@ -114,7 +114,7 @@ allocation behavior using Linux NUMA memory policy. [see System administrators can restrict the CPUs and nodes' memories that a non- privileged user can specify in the scheduling or NUMA commands and functions -using control groups and CPUsets. [see Documentation/cgroup-v1/cpusets.rst] +using control groups and CPUsets. [see Documentation/admin-guide/cgroup-v1/cpusets.rst] On architectures that do not hide memoryless nodes, Linux will include only zones [nodes] with memory in the zonelists. This means that for a memoryless diff --git a/Documentation/vm/page_migration.rst b/Documentation/vm/page_migration.rst index 35bba27d5fff..1d6cd7db4e43 100644 --- a/Documentation/vm/page_migration.rst +++ b/Documentation/vm/page_migration.rst @@ -41,7 +41,7 @@ locations. Larger installations usually partition the system using cpusets into sections of nodes. Paul Jackson has equipped cpusets with the ability to move pages when a task is moved to another cpuset (See -Documentation/cgroup-v1/cpusets.rst). +Documentation/admin-guide/cgroup-v1/cpusets.rst). Cpusets allows the automation of process locality. If a task is moved to a new cpuset then also all its pages are moved with it so that the performance of the process does not sink dramatically. Also the pages diff --git a/Documentation/vm/unevictable-lru.rst b/Documentation/vm/unevictable-lru.rst index 109052215bce..17d0861b0f1d 100644 --- a/Documentation/vm/unevictable-lru.rst +++ b/Documentation/vm/unevictable-lru.rst @@ -98,7 +98,7 @@ Memory Control Group Interaction -------------------------------- The unevictable LRU facility interacts with the memory control group [aka -memory controller; see Documentation/cgroup-v1/memory.rst] by extending the +memory controller; see Documentation/admin-guide/cgroup-v1/memory.rst] by extending the lru_list enum. The memory controller data structure automatically gets a per-zone unevictable diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst index 30108684ae87..ff9bcfd2cc14 100644 --- a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst @@ -15,7 +15,7 @@ assign them to cpusets and their attached tasks. This is a way of limiting the amount of system memory that are available to a certain class of tasks. For more information on the features of cpusets, see -Documentation/cgroup-v1/cpusets.rst. +Documentation/admin-guide/cgroup-v1/cpusets.rst. There are a number of different configurations you can use for your needs. For more information on the numa=fake command line option and its various ways of configuring fake nodes, see Documentation/x86/x86_64/boot-options.rst. @@ -40,7 +40,7 @@ A machine may be split as follows with "numa=fake=4*512," as reported by dmesg:: On node 3 totalpages: 131072 Now following the instructions for mounting the cpusets filesystem from -Documentation/cgroup-v1/cpusets.rst, you can assign fake nodes (i.e. contiguous memory +Documentation/admin-guide/cgroup-v1/cpusets.rst, you can assign fake nodes (i.e. contiguous memory address spaces) to individual cpusets:: [root@xroads /]# mkdir exampleset diff --git a/MAINTAINERS b/MAINTAINERS index 0c603ea73034..c1593a668f80 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4158,7 +4158,7 @@ L: cgroups@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git S: Maintained F: Documentation/admin-guide/cgroup-v2.rst -F: Documentation/cgroup-v1/ +F: Documentation/admin-guide/cgroup-v1/ F: include/linux/cgroup* F: kernel/cgroup/ @@ -4169,7 +4169,7 @@ W: http://www.bullopensource.org/cpuset/ W: http://oss.sgi.com/projects/cpusets/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git S: Maintained -F: Documentation/cgroup-v1/cpusets.rst +F: Documentation/admin-guide/cgroup-v1/cpusets.rst F: include/linux/cpuset.h F: kernel/cgroup/cpuset.c diff --git a/block/Kconfig b/block/Kconfig index b16b3e075d31..8b5f8e560eb4 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -89,7 +89,7 @@ config BLK_DEV_THROTTLING one needs to mount and use blkio cgroup controller for creating cgroups and specifying per device IO rate policies. - See Documentation/cgroup-v1/blkio-controller.rst for more information. + See Documentation/admin-guide/cgroup-v1/blkio-controller.rst for more information. config BLK_DEV_THROTTLING_LOW bool "Block throttling .low limit interface support (EXPERIMENTAL)" diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h index c5311935239d..430e219e3aba 100644 --- a/include/linux/cgroup-defs.h +++ b/include/linux/cgroup-defs.h @@ -624,7 +624,7 @@ struct cftype { /* * Control Group subsystem type. - * See Documentation/cgroup-v1/cgroups.rst for details + * See Documentation/admin-guide/cgroup-v1/cgroups.rst for details */ struct cgroup_subsys { struct cgroup_subsys_state *(*css_alloc)(struct cgroup_subsys_state *parent_css); diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 6f68438aa4ed..82699845ef79 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -806,7 +806,7 @@ union bpf_attr { * based on a user-provided identifier for all traffic coming from * the tasks belonging to the related cgroup. See also the related * kernel documentation, available from the Linux sources in file - * *Documentation/cgroup-v1/net_cls.rst*. + * *Documentation/admin-guide/cgroup-v1/net_cls.rst*. * * The Linux kernel has two versions for cgroups: there are * cgroups v1 and cgroups v2. Both are available to users, who can diff --git a/init/Kconfig b/init/Kconfig index 9eb92ee52d40..381cdfee6e0e 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -821,7 +821,7 @@ menuconfig CGROUPS controls or device isolation. See - Documentation/scheduler/sched-design-CFS.rst (CFS) - - Documentation/cgroup-v1/ (features for grouping, isolation + - Documentation/admin-guide/cgroup-v1/ (features for grouping, isolation and resource control) Say N if unsure. @@ -883,7 +883,7 @@ config BLK_CGROUP CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set CONFIG_BLK_DEV_THROTTLING=y. - See Documentation/cgroup-v1/blkio-controller.rst for more information. + See Documentation/admin-guide/cgroup-v1/blkio-controller.rst for more information. config CGROUP_WRITEBACK bool diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index b3b02b9c4405..863e434a6020 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -729,7 +729,7 @@ static inline int nr_cpusets(void) * load balancing domains (sched domains) as specified by that partial * partition. * - * See "What is sched_load_balance" in Documentation/cgroup-v1/cpusets.rst + * See "What is sched_load_balance" in Documentation/admin-guide/cgroup-v1/cpusets.rst * for a background explanation of this. * * Does not return errors, on the theory that the callers of this diff --git a/security/device_cgroup.c b/security/device_cgroup.c index c07196502577..725674f3276d 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -509,7 +509,7 @@ static inline int may_allow_all(struct dev_cgroup *parent) * This is one of the three key functions for hierarchy implementation. * This function is responsible for re-evaluating all the cgroup's active * exceptions due to a parent's exception change. - * Refer to Documentation/cgroup-v1/devices.rst for more details. + * Refer to Documentation/admin-guide/cgroup-v1/devices.rst for more details. */ static void revalidate_active_exceptions(struct dev_cgroup *devcg) { diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index f506c68b2612..17e2b1713702 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -806,7 +806,7 @@ union bpf_attr { * based on a user-provided identifier for all traffic coming from * the tasks belonging to the related cgroup. See also the related * kernel documentation, available from the Linux sources in file - * *Documentation/cgroup-v1/net_cls.rst*. + * *Documentation/admin-guide/cgroup-v1/net_cls.rst*. * * The Linux kernel has two versions for cgroups: there are * cgroups v1 and cgroups v2. Both are available to users, who can -- cgit v1.2.3-55-g7522