From 3d632cc87204b51a4b32bdaa970fe6b8d879347e Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Tue, 7 Jun 2016 01:14:50 +0200 Subject: ASoC: sgtl5000: Initialize CHIP_ANA_POWER to power-on defaults Initialize CHIP_ANA_POWER to match power on defaults, which disables ADC, DAC, and charge pumps. In the process, remove references to the following register/bitfields from the sgtl5000_set_power_regs routine: CHIP_ANA_POWER/LINREG_SIMPLE_POWERUP and CHIP_LINREG_CTRL/LINREG_VDD_MASK And remove CHIP_ANA_POWER and CHIP_LINREG_CTRL from the set of default registers so they don't get clobbered by sgtl5000_fill_defaults(). Signed-off-by: Eric Nelson Signed-off-by: Clemens Gruber Tested-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 56 +++++++++++++++++---------------------------- 1 file changed, 21 insertions(+), 35 deletions(-) (limited to 'sound/soc/codecs/sgtl5000.c') diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 56d61a212083..42f2eb62664e 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -47,12 +47,10 @@ static const struct reg_default sgtl5000_reg_defaults[] = { { SGTL5000_CHIP_ANA_ADC_CTRL, 0x0000 }, { SGTL5000_CHIP_ANA_HP_CTRL, 0x1818 }, { SGTL5000_CHIP_ANA_CTRL, 0x0111 }, - { SGTL5000_CHIP_LINREG_CTRL, 0x0000 }, { SGTL5000_CHIP_REF_CTRL, 0x0000 }, { SGTL5000_CHIP_MIC_CTRL, 0x0000 }, { SGTL5000_CHIP_LINE_OUT_CTRL, 0x0000 }, { SGTL5000_CHIP_LINE_OUT_VOL, 0x0404 }, - { SGTL5000_CHIP_ANA_POWER, 0x7060 }, { SGTL5000_CHIP_PLL_CTRL, 0x5000 }, { SGTL5000_CHIP_CLK_TOP_CTRL, 0x0000 }, { SGTL5000_CHIP_ANA_STATUS, 0x0000 }, @@ -93,6 +91,7 @@ static const char *supply_names[SGTL5000_SUPPLY_NUM] = { }; #define LDO_VOLTAGE 1200000 +#define LINREG_VDDD ((1600 - LDO_VOLTAGE / 1000) / 50) enum sgtl5000_micbias_resistor { SGTL5000_MICBIAS_OFF = 0, @@ -1002,25 +1001,6 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr); - /* set voltage to register */ - snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL, - SGTL5000_LINREG_VDDD_MASK, 0x8); - - /* - * if vddd linear reg has been enabled, - * simple digital supply should be clear to get - * proper VDDD voltage. - */ - if (ana_pwr & SGTL5000_LINEREG_D_POWERUP) - snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, - SGTL5000_LINREG_SIMPLE_POWERUP, - 0); - else - snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, - SGTL5000_LINREG_SIMPLE_POWERUP | - SGTL5000_STARTUP_POWERUP, - 0); - /* * set ADC/DAC VAG to vdda / 2, * should stay in range (0.8v, 1.575v) @@ -1242,6 +1222,7 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, int ret, reg, rev; struct device_node *np = client->dev.of_node; u32 value; + u16 ana_pwr; sgtl5000 = devm_kzalloc(&client->dev, sizeof(*sgtl5000), GFP_KERNEL); if (!sgtl5000) @@ -1299,29 +1280,34 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, sgtl5000->revision = rev; /* Follow section 2.2.1.1 of AN3663 */ + ana_pwr = SGTL5000_ANA_POWER_DEFAULT; if (sgtl5000->num_supplies <= VDDD) { /* internal VDDD at 1.2V */ - regmap_update_bits(sgtl5000->regmap, - SGTL5000_CHIP_LINREG_CTRL, - SGTL5000_LINREG_VDDD_MASK, 8); - regmap_update_bits(sgtl5000->regmap, - SGTL5000_CHIP_ANA_POWER, - SGTL5000_LINEREG_D_POWERUP - | SGTL5000_LINREG_SIMPLE_POWERUP, - SGTL5000_LINEREG_D_POWERUP); - dev_info(&client->dev, "Using internal LDO instead of VDDD: check ER1\n"); + ret = regmap_update_bits(sgtl5000->regmap, + SGTL5000_CHIP_LINREG_CTRL, + SGTL5000_LINREG_VDDD_MASK, + LINREG_VDDD); + if (ret) + dev_err(&client->dev, + "Error %d setting LINREG_VDDD\n", ret); + + ana_pwr |= SGTL5000_LINEREG_D_POWERUP; + dev_info(&client->dev, + "Using internal LDO instead of VDDD: check ER1\n"); } else { /* using external LDO for VDDD * Clear startup powerup and simple powerup * bits to save power */ - regmap_update_bits(sgtl5000->regmap, - SGTL5000_CHIP_ANA_POWER, - SGTL5000_STARTUP_POWERUP - | SGTL5000_LINREG_SIMPLE_POWERUP, - 0); + ana_pwr &= ~(SGTL5000_STARTUP_POWERUP + | SGTL5000_LINREG_SIMPLE_POWERUP); dev_dbg(&client->dev, "Using external VDDD\n"); } + ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, ana_pwr); + if (ret) + dev_err(&client->dev, + "Error %d setting CHIP_ANA_POWER to %04x\n", + ret, ana_pwr); if (np) { if (!of_property_read_u32(np, -- cgit v1.2.3-55-g7522