/* * ov534/ov772x gspca driver * Copyright (C) 2008 Antonio Ospite * * Based on a prototype written by Mark Ferrell * USB protocol reverse engineered by Jim Paris * https://jim.sh/svn/jim/devl/playstation/ps3/eye/test/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #define MODULE_NAME "ov534" #include "gspca.h" #define OV534_REG_ADDRESS 0xf1 /* ? */ #define OV534_REG_SUBADDR 0xf2 #define OV534_REG_WRITE 0xf3 #define OV534_REG_READ 0xf4 #define OV534_REG_OPERATION 0xf5 #define OV534_REG_STATUS 0xf6 #define OV534_OP_WRITE_3 0x37 #define OV534_OP_WRITE_2 0x33 #define OV534_OP_READ_2 0xf9 #define CTRL_TIMEOUT 500 MODULE_AUTHOR("Antonio Ospite "); MODULE_DESCRIPTION("GSPCA/OV534 USB Camera Driver"); MODULE_LICENSE("GPL"); /* global parameters */ static int frame_rate; /* specific webcam descriptor */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ }; /* V4L2 controls supported by the driver */ static struct ctrl sd_ctrls[] = { }; static struct v4l2_pix_format vga_mode[] = { {640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, .bytesperline = 640 * 2, .sizeimage = 640 * 480 * 2, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; static void ov534_reg_write(struct usb_device *udev, u16 reg, u8 val) { u8 data = val; int ret; PDEBUG(D_USBO, "reg=0x%04x, val=0%02x", reg, val); ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x1, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0, reg, &data, 1, CTRL_TIMEOUT); if (ret < 0) PDEBUG(D_ERR, "write failed"); } static u8 ov534_reg_read(struct usb_device *udev, u16 reg) { u8 data; int ret; ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x1, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0, reg, &data, 1, CTRL_TIMEOUT); PDEBUG(D_USBI, "reg=0x%04x, data=0x%02x", reg, data); if (ret < 0) PDEBUG(D_ERR, "read failed"); return data; } /* Two bits control LED: 0x21 bit 7 and 0x23 bit 7. * (direction and output)? */ static void ov534_set_led(struct usb_device *udev, int status) { u8 data; PDEBUG(D_CONF, "led status: %d", status); data = ov534_reg_read(udev, 0x21); data |= 0x80; ov534_reg_write(udev, 0x21, data); data = ov534_reg_read(udev, 0x23); if (status) data |= 0x80; else data &= ~(0x80); ov534_reg_write(udev, 0x23, data); } static int sccb_check_status(struct usb_device *udev) { u8 data; int i; for (i = 0; i < 5; i++) { data = ov534_reg_read(udev, OV534_REG_STATUS); switch (data) { case 0x00: return 1; case 0x04: return 0; case 0x03: break; default: PDEBUG(D_ERR, "sccb status 0x%02x, attempt %d/5\n", data, i + 1); } } return 0; } static void sccb_reg_write(struct usb_device *udev, u16 reg, u8 val) { PDEBUG(D_USBO, "reg: 0x%04x, val: 0x%02x", reg, val); ov534_reg_write(udev, OV534_REG_SUBADDR, reg); ov534_reg_write(udev, OV534_REG_WRITE, val); ov534_reg_write(udev, OV534_REG_OPERATION, OV534_OP_WRITE_3); if (!sccb_check_status(udev)) PDEBUG(D_ERR, "sccb_reg_write failed"); } static const __u8 ov534_reg_initdata[][2] = { { 0xe7, 0x3a }, { OV534_REG_ADDRESS, 0x42 }, /* select OV772x sensor */ { 0xc2, 0x0c }, { 0x88, 0xf8 }, { 0xc3, 0x69 }, { 0x89, 0xff }, { 0x76, 0x03 }, { 0x92, 0x01 }, { 0x93, 0x18 }, { 0x94, 0x10 }, { 0x95, 0x10 }, { 0xe2, 0x00 }, { 0xe7, 0x3e }, { 0x96, 0x00 }, { 0x97, 0x20 }, { 0x97, 0x20 }, { 0x97, 0x20 }, { 0x97, 0x0a }, { 0x97, 0x3f }, { 0x97, 0x4a }, { 0x97, 0x20 }, { 0x97, 0x15 }, { 0x97, 0x0b }, { 0x8e, 0x40 }, { 0x1f, 0x81 }, { 0x34, 0x05 }, { 0xe3, 0x04 }, { 0x88, 0x00 }, { 0x89, 0x00 }, { 0x76, 0x00 }, { 0xe7, 0x2e }, { 0x31, 0xf9 }, { 0x25, 0x42 }, { 0x21, 0xf0 }, { 0x1c, 0x00 }, { 0x1d, 0x40 }, { 0x1d, 0x02 }, { 0x1d, 0x00 }, { 0x1d, 0x02 }, /* frame size 0x025800 * 4 = 614400 */ { 0x1d, 0x58 }, /* frame size */ { 0x1d, 0x00 }, /* frame size */ { 0x8d, 0x1c }, { 0x8e, 0x80 }, { 0xe5, 0x04 }, { 0xc0, 0x50 }, { 0xc1, 0x3c }, { 0xc2, 0x0c }, }; static const __u8 ov772x_reg_initdata[][2] = { { 0x12, 0x80 }, { 0x11, 0x01 }, { 0x3d, 0x03 }, { 0x17, 0x26 }, { 0x18, 0xa0 }, { 0x19, 0x07 }, { 0x1a, 0xf0 }, { 0x32, 0x00 }, { 0x29, 0xa0 }, { 0x2c, 0xf0 }, { 0x65, 0x20 }, { 0x11, 0x01 }, { 0x42, 0x7f }, { 0x63, 0xe0 }, { 0x64, 0xff }, { 0x66, 0x00 }, { 0x13, 0xf0 }, { 0x0d, 0x41 }, { 0x0f, 0xc5 }, { 0x14, 0x11 }, { 0x22, 0x7f }, { 0x23, 0x03 }, { 0x24, 0x40 }, { 0x25, 0x30 }, { 0x26, 0xa1 }, { 0x2a, 0x00 }, { 0x2b, 0x00 }, { 0x6b, 0xaa }, { 0x13, 0xff }, { 0x90, 0x05 }, { 0x91, 0x01 }, { 0x92, 0x03 }, { 0x93, 0x00 }, { 0x94, 0x60 }, { 0x95, 0x3c }, { 0x96, 0x24 }, { 0x97, 0x1e }, { 0x98, 0x62 }, { 0x99, 0x80 }, { 0x9a, 0x1e }, { 0x9b, 0x08 }, { 0x9c, 0x20 }, { 0x9e, 0x81 }, { 0xa6, 0x04 }, { 0x7e, 0x0c }, { 0x7f, 0x16 }, { 0x80, 0x2a }, { 0x81, 0x4e }, { 0x82, 0x61 }, { 0x83, 0x6f }, { 0x84, 0x7b }, { 0x85, 0x86 }, { 0x86, 0x8e }, { 0x87, 0x97 }, { 0x88, 0xa4 }, { 0x89, 0xaf }, { 0x8a, 0xc5 }, { 0x8b, 0xd7 }, { 0x8c, 0xe8 }, { 0x8d, 0x20 }, { 0x0c, 0x90 }, { 0x2b, 0x00 }, { 0x22, 0x7f }, { 0x23, 0x03 }, { 0x11, 0x01 }, { 0x0c, 0xd0 }, { 0x64, 0xff }, { 0x0d, 0x41 }, { 0x14, 0x41 }, { 0x0e, 0xcd }, { 0xac, 0xbf }, { 0x8e, 0x00 }, { 0x0c, 0xd0 } }; /* setup method */ static void ov534_setup(struct usb_device *udev) { int i; /* Initialize bridge chip */ for (i = 0; i < ARRAY_SIZE(ov534_reg_initdata); i++) ov534_reg_write(udev, ov534_reg_initdata[i][0], ov534_reg_initdata[i][1]); ov534_set_led(udev, 1); /* Initialize sensor */ for (i = 0; i < ARRAY_SIZE(ov772x_reg_initdata); i++) sccb_reg_write(udev, ov772x_reg_initdata[i][0], ov772x_reg_initdata[i][1]); ov534_reg_write(udev, 0xe0, 0x09); ov534_set_led(udev, 0); } /* this function is called at probe time */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct cam *cam; cam = &gspca_dev->cam; cam->epaddr = 0x01; cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); cam->bulk_size = 2048; cam->bulk_nurbs = 2; return 0; } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { int fr; ov534_setup(gspca_dev->dev); fr = frame_rate; switch (fr) { case 50: sccb_reg_write(gspca_dev->dev, 0x11, 0x01); sccb_reg_write(gspca_dev->dev, 0x0d, 0x41); ov534_reg_write(gspca_dev->dev, 0xe5, 0x02); break; case 40: sccb_reg_write(gspca_dev->dev, 0x11, 0x02); sccb_reg_write(gspca_dev->dev, 0x0d, 0xc1); ov534_reg_write(gspca_dev->dev, 0xe5, 0x04); break; /* case 30: */ default: fr = 30; sccb_reg_write(gspca_dev->dev, 0x11, 0x04); sccb_reg_write(gspca_dev->dev, 0x0d, 0x81); ov534_reg_write(gspca_dev->dev, 0xe5, 0x02); break; case 15: sccb_reg_write(gspca_dev->dev, 0x11, 0x03); sccb_reg_write(gspca_dev->dev, 0x0d, 0x41); ov534_reg_write(gspca_dev->dev, 0xe5, 0x04); break; } PDEBUG(D_PROBE, "frame_rate: %d", fr); return 0; } static int sd_start(struct gspca_dev *gspca_dev) { /* start streaming data */ ov534_set_led(gspca_dev->dev, 1); ov534_reg_write(gspca_dev->dev, 0xe0, 0x00); return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) { /* stop streaming data */ ov534_reg_write(gspca_dev->dev, 0xe0, 0x09); ov534_set_led(gspca_dev->dev, 0); } /* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */ #define UVC_STREAM_EOH (1 << 7) #define UVC_STREAM_ERR (1 << 6) #define UVC_STREAM_STI (1 << 5) #define UVC_STREAM_RES (1 << 4) #define UVC_STREAM_SCR (1 << 3) #define UVC_STREAM_PTS (1 << 2) #define UVC_STREAM_EOF (1 << 1) #define UVC_STREAM_FID (1 << 0) static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, __u8 *data, int len) { static __u32 last_pts; __u32 this_pts; static int last_fid; int this_fid; /* Payloads are prefixed with a the UVC-style header. We consider a frame to start when the FID toggles, or the PTS changes. A frame ends when EOF is set, and we've received the correct number of bytes. */ /* Verify UVC header. Header length is always 12 */ if (data[0] != 12 || len < 12) { PDEBUG(D_PACK, "bad header"); goto discard; } /* Check errors */ if (data[1] & UVC_STREAM_ERR) { PDEBUG(D_PACK, "payload error"); goto discard; } /* Extract PTS and FID */ if (!(data[1] & UVC_STREAM_PTS)) { PDEBUG(D_PACK, "PTS not present"); goto discard; } this_pts = (data[5] << 24) | (data[4] << 16) | (data[3] << 8) | data[2]; this_fid = (data[1] & UVC_STREAM_FID) ? 1 : 0; /* If PTS or FID has changed, start a new frame. */ if (this_pts != last_pts || this_fid != last_fid) { gspca_frame_add(gspca_dev, FIRST_PACKET, frame, NULL, 0); last_pts = this_pts; last_fid = this_fid; } /* Add the data from this payload */ gspca_frame_add(gspca_dev, INTER_PACKET, frame, data + 12, len - 12); /* If this packet is marked as EOF, end the frame */ if (data[1] & UVC_STREAM_EOF) { last_pts = 0; if ((frame->data_end - frame->data) != (gspca_dev->width * gspca_dev->height * 2)) { PDEBUG(D_PACK, "short frame"); goto discard; } gspca_frame_add(gspca_dev, LAST_PACKET, frame, NULL, 0); } /* Done */ return; discard: /* Discard data until a new frame starts. */ gspca_frame_add(gspca_dev, DISCARD_PACKET, frame, NULL, 0); } /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, .init = sd_init, .start = sd_start, .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, }; /* -- module initialisation -- */ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x06f8, 0x3002)}, /* Hercules Blog Webcam */ {USB_DEVICE(0x06f8, 0x3003)}, /* Hercules Dualpix HD Weblog */ {USB_DEVICE(0x1415, 0x2000)}, /* Sony HD Eye for PS3 (SLEH 00201) */ {} }; MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), THIS_MODULE); } static struct usb_driver sd_driver = { .name = MODULE_NAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, #ifdef CONFIG_PM .suspend = gspca_suspend, .resume = gspca_resume, #endif }; /* -- module insert / remove -- */ static int __init sd_mod_init(void) { if (usb_register(&sd_driver) < 0) return -1; PDEBUG(D_PROBE, "registered"); return 0; } static void __exit sd_mod_exit(void) { usb_deregister(&sd_driver); PDEBUG(D_PROBE, "deregistered"); } module_init(sd_mod_init); module_exit(sd_mod_exit); module_param(frame_rate, int, 0644); MODULE_PARM_DESC(frame_rate, "Frame rate (15, 30, 40, 50)");