/* vi: ts=8 sw=8 * * TI 3410/5052 USB Serial Driver * * Copyright (C) 2004 Texas Instruments * * This driver is based on the Linux io_ti driver, which is * Copyright (C) 2000-2002 Inside Out Networks * Copyright (C) 2001-2002 Greg Kroah-Hartman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * For questions or problems with this driver, contact Texas Instruments * technical support, or Al Borchers , or * Peter Berger . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ti_usb_3410_5052.h" /* Defines */ #define TI_DRIVER_AUTHOR "Al Borchers " #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver" #define TI_FIRMWARE_BUF_SIZE 16284 #define TI_WRITE_BUF_SIZE 1024 #define TI_TRANSFER_TIMEOUT 2 #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ /* supported setserial flags */ #define TI_SET_SERIAL_FLAGS 0 /* read urb states */ #define TI_READ_URB_RUNNING 0 #define TI_READ_URB_STOPPING 1 #define TI_READ_URB_STOPPED 2 #define TI_EXTRA_VID_PID_COUNT 5 /* Structures */ struct ti_port { int tp_is_open; __u8 tp_msr; __u8 tp_lsr; __u8 tp_shadow_mcr; __u8 tp_uart_mode; /* 232 or 485 modes */ unsigned int tp_uart_base_addr; int tp_flags; int tp_closing_wait;/* in .01 secs */ struct async_icount tp_icount; wait_queue_head_t tp_write_wait; struct ti_device *tp_tdev; struct usb_serial_port *tp_port; spinlock_t tp_lock; int tp_read_urb_state; int tp_write_urb_in_use; struct kfifo write_fifo; }; struct ti_device { struct mutex td_open_close_lock; int td_open_port_count; struct usb_serial *td_serial; int td_is_3410; int td_urb_error; }; /* Function Declarations */ static int ti_startup(struct usb_serial *serial); static void ti_release(struct usb_serial *serial); static int ti_port_probe(struct usb_serial_port *port); static int ti_port_remove(struct usb_serial_port *port); static int ti_open(struct tty_struct *tty, struct usb_serial_port *port); static void ti_close(struct usb_serial_port *port); static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count); static int ti_write_room(struct tty_struct *tty); static int ti_chars_in_buffer(struct tty_struct *tty); static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int ti_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static int ti_tiocmget(struct tty_struct *tty); static int ti_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void ti_break(struct tty_struct *tty, int break_state); static void ti_interrupt_callback(struct urb *urb); static void ti_bulk_in_callback(struct urb *urb); static void ti_bulk_out_callback(struct urb *urb); static void ti_recv(struct usb_serial_port *port, unsigned char *data, int length); static void ti_send(struct ti_port *tport); static int ti_set_mcr(struct ti_port *tport, unsigned int mcr); static int ti_get_lsr(struct ti_port *tport); static int ti_get_serial_info(struct ti_port *tport, struct serial_struct __user *ret_arg); static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, struct serial_struct __user *new_arg); static void ti_handle_new_msr(struct ti_port *tport, __u8 msr); static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush); static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty); static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty); static int ti_command_out_sync(struct ti_device *tdev, __u8 command, __u16 moduleid, __u16 value, __u8 *data, int size); static int ti_command_in_sync(struct ti_device *tdev, __u8 command, __u16 moduleid, __u16 value, __u8 *data, int size); static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, unsigned long addr, __u8 mask, __u8 byte); static int ti_download_firmware(struct ti_device *tdev); /* Data */ /* module parameters */ static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; static ushort product_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int product_3410_count; static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_5052_count; static ushort product_5052[TI_EXTRA_VID_PID_COUNT]; static unsigned int product_5052_count; /* supported devices */ /* the array dimension is the number of default entries plus */ /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ /* null entry */ static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_combined[19+2*TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, { } }; static struct usb_serial_driver ti_1port_device = { .driver = { .owner = THIS_MODULE, .name = "ti_usb_3410_5052_1", }, .description = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_ports = 1, .attach = ti_startup, .release = ti_release, .port_probe = ti_port_probe, .port_remove = ti_port_remove, .open = ti_open, .close = ti_close, .write = ti_write, .write_room = ti_write_room, .chars_in_buffer = ti_chars_in_buffer, .throttle = ti_throttle, .unthrottle = ti_unthrottle, .ioctl = ti_ioctl, .set_termios = ti_set_termios, .tiocmget = ti_tiocmget, .tiocmset = ti_tiocmset, .get_icount = ti_get_icount, .break_ctl = ti_break, .read_int_callback = ti_interrupt_callback, .read_bulk_callback = ti_bulk_in_callback, .write_bulk_callback = ti_bulk_out_callback, }; static struct usb_serial_driver ti_2port_device = { .driver = { .owner = THIS_MODULE, .name = "ti_usb_3410_5052_2", }, .description = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_ports = 2, .attach = ti_startup, .release = ti_release, .port_probe = ti_port_probe, .port_remove = ti_port_remove, .open = ti_open, .close = ti_close, .write = ti_write, .write_room = ti_write_room, .chars_in_buffer = ti_chars_in_buffer, .throttle = ti_throttle, .unthrottle = ti_unthrottle, .ioctl = ti_ioctl, .set_termios = ti_set_termios, .tiocmget = ti_tiocmget, .tiocmset = ti_tiocmset, .get_icount = ti_get_icount, .break_ctl = ti_break, .read_int_callback = ti_interrupt_callback, .read_bulk_callback = ti_bulk_in_callback, .write_bulk_callback = ti_bulk_out_callback, }; static struct usb_serial_driver * const serial_drivers[] = { &ti_1port_device, &ti_2port_device, NULL }; /* Module */ MODULE_AUTHOR(TI_DRIVER_AUTHOR); MODULE_DESCRIPTION(TI_DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("ti_3410.fw"); MODULE_FIRMWARE("ti_5052.fw"); MODULE_FIRMWARE("mts_cdma.fw"); MODULE_FIRMWARE("mts_gsm.fw"); MODULE_FIRMWARE("mts_edge.fw"); MODULE_FIRMWARE("mts_mt9234mu.fw"); MODULE_FIRMWARE("mts_mt9234zba.fw"); module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO); MODULE_PARM_DESC(vendor_3410, "Vendor ids for 3410 based devices, 1-5 short integers"); module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO); MODULE_PARM_DESC(product_3410, "Product ids for 3410 based devices, 1-5 short integers"); module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO); MODULE_PARM_DESC(vendor_5052, "Vendor ids for 5052 based devices, 1-5 short integers"); module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO); MODULE_PARM_DESC(product_5052, "Product ids for 5052 based devices, 1-5 short integers"); MODULE_DEVICE_TABLE(usb, ti_id_table_combined); /* Functions */ static int __init ti_init(void) { int i, j, c; /* insert extra vendor and product ids */ c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1; j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1; for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++, c++) { ti_id_table_3410[j].idVendor = vendor_3410[i]; ti_id_table_3410[j].idProduct = product_3410[i]; ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE; ti_id_table_combined[c].idVendor = vendor_3410[i]; ti_id_table_combined[c].idProduct = product_3410[i]; ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE; } j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1; for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++, c++) { ti_id_table_5052[j].idVendor = vendor_5052[i]; ti_id_table_5052[j].idProduct = product_5052[i]; ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE; ti_id_table_combined[c].idVendor = vendor_5052[i]; ti_id_table_combined[c].idProduct = product_5052[i]; ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE; } return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ti_id_table_combined); } static void __exit ti_exit(void) { usb_serial_deregister_drivers(serial_drivers); } module_init(ti_init); module_exit(ti_exit); static int ti_startup(struct usb_serial *serial) { struct ti_device *tdev; struct usb_device *dev = serial->dev; int status; dev_dbg(&dev->dev, "%s - product 0x%4X, num configurations %d, configuration value %d", __func__, le16_to_cpu(dev->descriptor.idProduct), dev->descriptor.bNumConfigurations, dev->actconfig->desc.bConfigurationValue); /* create device structure */ tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL); if (tdev == NULL) { dev_err(&dev->dev, "%s - out of memory\n", __func__); return -ENOMEM; } mutex_init(&tdev->td_open_close_lock); tdev->td_serial = serial; usb_set_serial_data(serial, tdev); /* determine device type */ if (usb_match_id(serial->interface, ti_id_table_3410)) tdev->td_is_3410 = 1; dev_dbg(&dev->dev, "%s - device type is %s\n", __func__, tdev->td_is_3410 ? "3410" : "5052"); /* if we have only 1 configuration, download firmware */ if (dev->descriptor.bNumConfigurations == 1) { status = ti_download_firmware(tdev); if (status != 0) goto free_tdev; /* 3410 must be reset, 5052 resets itself */ if (tdev->td_is_3410) { msleep_interruptible(100); usb_reset_device(dev); } status = -ENODEV; goto free_tdev; } /* the second configuration must be set */ if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG); status = status ? status : -ENODEV; goto free_tdev; } return 0; free_tdev: kfree(tdev); usb_set_serial_data(serial, NULL); return status; } static void ti_release(struct usb_serial *serial) { struct ti_device *tdev = usb_get_serial_data(serial); kfree(tdev); } static int ti_port_probe(struct usb_serial_port *port) { struct ti_port *tport; tport = kzalloc(sizeof(*tport), GFP_KERNEL); if (!tport) return -ENOMEM; spin_lock_init(&tport->tp_lock); if (port == port->serial->port[0]) tport->tp_uart_base_addr = TI_UART1_BASE_ADDR; else tport->tp_uart_base_addr = TI_UART2_BASE_ADDR; tport->tp_closing_wait = closing_wait; init_waitqueue_head(&tport->tp_write_wait); if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) { kfree(tport); return -ENOMEM; } tport->tp_port = port; tport->tp_tdev = usb_get_serial_data(port->serial); tport->tp_uart_mode = 0; /* default is RS232 */ usb_set_serial_port_data(port, tport); return 0; } static int ti_port_remove(struct usb_serial_port *port) { struct ti_port *tport; tport = usb_get_serial_port_data(port); kfifo_free(&tport->write_fifo); kfree(tport); return 0; } static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ti_port *tport = usb_get_serial_port_data(port); struct ti_device *tdev; struct usb_device *dev; struct urb *urb; int port_number; int status; __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | TI_PIPE_TIMEOUT_ENABLE | (TI_TRANSFER_TIMEOUT << 2)); if (tport == NULL) return -ENODEV; dev = port->serial->dev; tdev = tport->tp_tdev; /* only one open on any port on a device at a time */ if (mutex_lock_interruptible(&tdev->td_open_close_lock)) return -ERESTARTSYS; port_number = port->number - port->serial->minor; memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount)); tport->tp_msr = 0; tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); /* start interrupt urb the first time a port is opened on this device */ if (tdev->td_open_port_count == 0) { dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__); urb = tdev->td_serial->port[0]->interrupt_in_urb; if (!urb) { dev_err(&port->dev, "%s - no interrupt urb\n", __func__); status = -EINVAL; goto release_lock; } urb->context = tdev; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status); goto release_lock; } } if (tty) ti_set_termios(tty, port, &tty->termios); dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send open command, %d\n", __func__, status); goto unlink_int_urb; } dev_dbg(&port->dev, "%s - sending TI_START_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send start command, %d\n", __func__, status); goto unlink_int_urb; } dev_dbg(&port->dev, "%s - sending TI_PURGE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __func__, status); goto unlink_int_urb; } status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __func__, status); goto unlink_int_urb; } /* reset the data toggle on the bulk endpoints to work around bug in * host controllers where things get out of sync some times */ usb_clear_halt(dev, port->write_urb->pipe); usb_clear_halt(dev, port->read_urb->pipe); if (tty) ti_set_termios(tty, port, &tty->termios); dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT (2)\n", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __func__, status); goto unlink_int_urb; } dev_dbg(&port->dev, "%s - sending TI_START_PORT (2)\n", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __func__, status); goto unlink_int_urb; } /* start read urb */ dev_dbg(&port->dev, "%s - start read urb\n", __func__); urb = port->read_urb; if (!urb) { dev_err(&port->dev, "%s - no read urb\n", __func__); status = -EINVAL; goto unlink_int_urb; } tport->tp_read_urb_state = TI_READ_URB_RUNNING; urb->context = tport; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { dev_err(&port->dev, "%s - submit read urb failed, %d\n", __func__, status); goto unlink_int_urb; } tport->tp_is_open = 1; ++tdev->td_open_port_count; goto release_lock; unlink_int_urb: if (tdev->td_open_port_count == 0) usb_kill_urb(port->serial->port[0]->interrupt_in_urb); release_lock: mutex_unlock(&tdev->td_open_close_lock); dev_dbg(&port->dev, "%s - exit %d\n", __func__, status); return status; } static void ti_close(struct usb_serial_port *port) { struct ti_device *tdev; struct ti_port *tport; int port_number; int status; int do_unlock; tdev = usb_get_serial_data(port->serial); tport = usb_get_serial_port_data(port); if (tdev == NULL || tport == NULL) return; tport->tp_is_open = 0; ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1); usb_kill_urb(port->read_urb); usb_kill_urb(port->write_urb); tport->tp_write_urb_in_use = 0; port_number = port->number - port->serial->minor; dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_CLOSE_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __func__, status); /* if mutex_lock is interrupted, continue anyway */ do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock); --tport->tp_tdev->td_open_port_count; if (tport->tp_tdev->td_open_port_count <= 0) { /* last port is closed, shut down interrupt urb */ usb_kill_urb(port->serial->port[0]->interrupt_in_urb); tport->tp_tdev->td_open_port_count = 0; } if (do_unlock) mutex_unlock(&tdev->td_open_close_lock); } static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count) { struct ti_port *tport = usb_get_serial_port_data(port); if (count == 0) { dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } if (tport == NULL || !tport->tp_is_open) return -ENODEV; count = kfifo_in_locked(&tport->write_fifo, data, count, &tport->tp_lock); ti_send(tport); return count; } static int ti_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); int room = 0; unsigned long flags; if (tport == NULL) return 0; spin_lock_irqsave(&tport->tp_lock, flags); room = kfifo_avail(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } static int ti_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; if (tport == NULL) return 0; spin_lock_irqsave(&tport->tp_lock, flags); chars = kfifo_len(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } static void ti_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); if (tport == NULL) return; if (I_IXOFF(tty) || C_CRTSCTS(tty)) ti_stop_read(tport, tty); } static void ti_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); int status; if (tport == NULL) return; if (I_IXOFF(tty) || C_CRTSCTS(tty)) { status = ti_restart_read(tport, tty); if (status) dev_err(&port->dev, "%s - cannot restart read, %d\n", __func__, status); } } static int ti_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); struct async_icount cnow = tport->tp_icount; dev_dbg(&port->dev, "%s - TIOCGICOUNT RX=%d, TX=%d\n", __func__, cnow.rx, cnow.tx); icount->cts = cnow.cts; icount->dsr = cnow.dsr; icount->rng = cnow.rng; icount->dcd = cnow.dcd; icount->rx = cnow.rx; icount->tx = cnow.tx; icount->frame = cnow.frame; icount->overrun = cnow.overrun; icount->parity = cnow.parity; icount->brk = cnow.brk; icount->buf_overrun = cnow.buf_overrun; return 0; } static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); struct async_icount cnow; struct async_icount cprev; dev_dbg(&port->dev, "%s - cmd = 0x%04X\n", __func__, cmd); if (tport == NULL) return -ENODEV; switch (cmd) { case TIOCGSERIAL: dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return ti_get_serial_info(tport, (struct serial_struct __user *)arg); case TIOCSSERIAL: dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__); return ti_set_serial_info(tty, tport, (struct serial_struct __user *)arg); case TIOCMIWAIT: dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); cprev = tport->tp_icount; while (1) { interruptible_sleep_on(&port->delta_msr_wait); if (signal_pending(current)) return -ERESTARTSYS; if (port->serial->disconnected) return -EIO; cnow = tport->tp_icount; if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) return -EIO; /* no change => error */ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) return 0; cprev = cnow; } break; } return -ENOIOCTLCMD; } static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct ti_port *tport = usb_get_serial_port_data(port); struct ti_uart_config *config; tcflag_t cflag, iflag; int baud; int status; int port_number = port->number - port->serial->minor; unsigned int mcr; cflag = tty->termios.c_cflag; iflag = tty->termios.c_iflag; dev_dbg(&port->dev, "%s - cflag %08x, iflag %08x\n", __func__, cflag, iflag); dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); if (tport == NULL) return; config = kmalloc(sizeof(*config), GFP_KERNEL); if (!config) { dev_err(&port->dev, "%s - out of memory\n", __func__); return; } config->wFlags = 0; /* these flags must be set */ config->wFlags |= TI_UART_ENABLE_MS_INTS; config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA; config->bUartMode = (__u8)(tport->tp_uart_mode); switch (cflag & CSIZE) { case CS5: config->bDataBits = TI_UART_5_DATA_BITS; break; case CS6: config->bDataBits = TI_UART_6_DATA_BITS; break; case CS7: config->bDataBits = TI_UART_7_DATA_BITS; break; default: case CS8: config->bDataBits = TI_UART_8_DATA_BITS; break; } /* CMSPAR isn't supported by this driver */ tty->termios.c_cflag &= ~CMSPAR; if (cflag & PARENB) { if (cflag & PARODD) { config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; config->bParity = TI_UART_ODD_PARITY; } else { config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; config->bParity = TI_UART_EVEN_PARITY; } } else { config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING; config->bParity = TI_UART_NO_PARITY; } if (cflag & CSTOPB) config->bStopBits = TI_UART_2_STOP_BITS; else config->bStopBits = TI_UART_1_STOP_BITS; if (cflag & CRTSCTS) { /* RTS flow control must be off to drop RTS for baud rate B0 */ if ((cflag & CBAUD) != B0) config->wFlags |= TI_UART_ENABLE_RTS_IN; config->wFlags |= TI_UART_ENABLE_CTS_OUT; } else { tty->hw_stopped = 0; ti_restart_read(tport, tty); } if (I_IXOFF(tty) || I_IXON(tty)) { config->cXon = START_CHAR(tty); config->cXoff = STOP_CHAR(tty); if (I_IXOFF(tty)) config->wFlags |= TI_UART_ENABLE_X_IN; else ti_restart_read(tport, tty); if (I_IXON(tty)) config->wFlags |= TI_UART_ENABLE_X_OUT; } baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; if (tport->tp_tdev->td_is_3410) config->wBaudRate = (__u16)((923077 + baud/2) / baud); else config->wBaudRate = (__u16)((461538 + baud/2) / baud); /* FIXME: Should calculate resulting baud here and report it back */ if ((cflag & CBAUD) != B0) tty_encode_baud_rate(tty, baud, baud); dev_dbg(&port->dev, "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); cpu_to_be16s(&config->wBaudRate); cpu_to_be16s(&config->wFlags); status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG, (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config, sizeof(*config)); if (status) dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __func__, port_number, status); /* SET_CONFIG asserts RTS and DTR, reset them correctly */ mcr = tport->tp_shadow_mcr; /* if baud rate is B0, clear RTS and DTR */ if ((cflag & CBAUD) == B0) mcr &= ~(TI_MCR_DTR | TI_MCR_RTS); status = ti_set_mcr(tport, mcr); if (status) dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __func__, port_number, status); kfree(config); } static int ti_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); unsigned int result; unsigned int msr; unsigned int mcr; unsigned long flags; if (tport == NULL) return -ENODEV; spin_lock_irqsave(&tport->tp_lock, flags); msr = tport->tp_msr; mcr = tport->tp_shadow_mcr; spin_unlock_irqrestore(&tport->tp_lock, flags); result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0) | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0) | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0) | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0) | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0) | ((msr & TI_MSR_RI) ? TIOCM_RI : 0) | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0); dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); return result; } static int ti_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); unsigned int mcr; unsigned long flags; if (tport == NULL) return -ENODEV; spin_lock_irqsave(&tport->tp_lock, flags); mcr = tport->tp_shadow_mcr; if (set & TIOCM_RTS) mcr |= TI_MCR_RTS; if (set & TIOCM_DTR) mcr |= TI_MCR_DTR; if (set & TIOCM_LOOP) mcr |= TI_MCR_LOOP; if (clear & TIOCM_RTS) mcr &= ~TI_MCR_RTS; if (clear & TIOCM_DTR) mcr &= ~TI_MCR_DTR; if (clear & TIOCM_LOOP) mcr &= ~TI_MCR_LOOP; spin_unlock_irqrestore(&tport->tp_lock, flags); return ti_set_mcr(tport, mcr); } static void ti_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); int status; dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state); if (tport == NULL) return; ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0); status = ti_write_byte(port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); if (status) dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status); } static void ti_interrupt_callback(struct urb *urb) { struct ti_device *tdev = urb->context; struct usb_serial_port *port; struct usb_serial *serial = tdev->td_serial; struct ti_port *tport; struct device *dev = &urb->dev->dev; unsigned char *data = urb->transfer_buffer; int length = urb->actual_length; int port_number; int function; int status = urb->status; int retval; __u8 msr; switch (status) { case 0: break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); tdev->td_urb_error = 1; return; default: dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status); tdev->td_urb_error = 1; goto exit; } if (length != 2) { dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length); goto exit; } if (data[0] == TI_CODE_HARDWARE_ERROR) { dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]); goto exit; } port_number = TI_GET_PORT_FROM_CODE(data[0]); function = TI_GET_FUNC_FROM_CODE(data[0]); dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n", __func__, port_number, function, data[1]); if (port_number >= serial->num_ports) { dev_err(dev, "%s - bad port number, %d\n", __func__, port_number); goto exit; } port = serial->port[port_number]; tport = usb_get_serial_port_data(port); if (!tport) goto exit; switch (function) { case TI_CODE_DATA_ERROR: dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __func__, port_number, data[1]); break; case TI_CODE_MODEM_STATUS: msr = data[1]; dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr); ti_handle_new_msr(tport, msr); break; default: dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __func__, data[1]); break; } exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(dev, "%s - resubmit interrupt urb failed, %d\n", __func__, retval); } static void ti_bulk_in_callback(struct urb *urb) { struct ti_port *tport = urb->context; struct usb_serial_port *port = tport->tp_port; struct device *dev = &urb->dev->dev; int status = urb->status; int retval = 0; switch (status) { case 0: break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); return; default: dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); } if (status == -EPIPE) goto exit; if (status) { dev_err(dev, "%s - stopping read!\n", __func__); return; } if (urb->actual_length) { usb_serial_debug_data(dev, __func__, urb->actual_length, urb->transfer_buffer); if (!tport->tp_is_open) dev_dbg(dev, "%s - port closed, dropping data\n", __func__); else ti_recv(port, urb->transfer_buffer, urb->actual_length); spin_lock(&tport->tp_lock); tport->tp_icount.rx += urb->actual_length; spin_unlock(&tport->tp_lock); } exit: /* continue to read unless stopping */ spin_lock(&tport->tp_lock); if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) retval = usb_submit_urb(urb, GFP_ATOMIC); else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) tport->tp_read_urb_state = TI_READ_URB_STOPPED; spin_unlock(&tport->tp_lock); if (retval) dev_err(dev, "%s - resubmit read urb failed, %d\n", __func__, retval); } static void ti_bulk_out_callback(struct urb *urb) { struct ti_port *tport = urb->context; struct usb_serial_port *port = tport->tp_port; int status = urb->status; tport->tp_write_urb_in_use = 0; switch (status) { case 0: break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); return; default: dev_err_console(port, "%s - nonzero urb status, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); } /* send any buffered data */ ti_send(tport); } static void ti_recv(struct usb_serial_port *port, unsigned char *data, int length) { int cnt; do { cnt = tty_insert_flip_string(&port->port, data, length); if (cnt < length) { dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); if (cnt == 0) break; } tty_flip_buffer_push(&port->port); data += cnt; length -= cnt; } while (length > 0); } static void ti_send(struct ti_port *tport) { int count, result; struct usb_serial_port *port = tport->tp_port; unsigned long flags; spin_lock_irqsave(&tport->tp_lock, flags); if (tport->tp_write_urb_in_use) goto unlock; count = kfifo_out(&tport->write_fifo, port->write_urb->transfer_buffer, port->bulk_out_size); if (count == 0) goto unlock; tport->tp_write_urb_in_use = 1; spin_unlock_irqrestore(&tport->tp_lock, flags); usb_serial_debug_data(&port->dev, __func__, count, port->write_urb->transfer_buffer); usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, count, ti_bulk_out_callback, tport); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { dev_err_console(port, "%s - submit write urb failed, %d\n", __func__, result); tport->tp_write_urb_in_use = 0; /* TODO: reschedule ti_send */ } else { spin_lock_irqsave(&tport->tp_lock, flags); tport->tp_icount.tx += count; spin_unlock_irqrestore(&tport->tp_lock, flags); } /* more room in the buffer for new writes, wakeup */ tty_port_tty_wakeup(&port->port); wake_up_interruptible(&tport->tp_write_wait); return; unlock: spin_unlock_irqrestore(&tport->tp_lock, flags); return; } static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) { unsigned long flags; int status; status = ti_write_byte(tport->tp_port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_MCR, TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr); spin_lock_irqsave(&tport->tp_lock, flags); if (!status) tport->tp_shadow_mcr = mcr; spin_unlock_irqrestore(&tport->tp_lock, flags); return status; } static int ti_get_lsr(struct ti_port *tport) { int size, status; struct ti_device *tdev = tport->tp_tdev; struct usb_serial_port *port = tport->tp_port; int port_number = port->number - port->serial->minor; struct ti_port_status *data; size = sizeof(struct ti_port_status); data = kmalloc(size, GFP_KERNEL); if (!data) { dev_err(&port->dev, "%s - out of memory\n", __func__); return -ENOMEM; } status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS, (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size); if (status) { dev_err(&port->dev, "%s - get port status command failed, %d\n", __func__, status); goto free_data; } dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR); tport->tp_lsr = data->bLSR; free_data: kfree(data); return status; } static int ti_get_serial_info(struct ti_port *tport, struct serial_struct __user *ret_arg) { struct usb_serial_port *port = tport->tp_port; struct serial_struct ret_serial; if (!ret_arg) return -EFAULT; memset(&ret_serial, 0, sizeof(ret_serial)); ret_serial.type = PORT_16550A; ret_serial.line = port->serial->minor; ret_serial.port = port->number - port->serial->minor; ret_serial.flags = tport->tp_flags; ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE; ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; ret_serial.closing_wait = tport->tp_closing_wait; if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg))) return -EFAULT; return 0; } static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, struct serial_struct __user *new_arg) { struct serial_struct new_serial; if (copy_from_user(&new_serial, new_arg, sizeof(new_serial))) return -EFAULT; tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; tport->tp_closing_wait = new_serial.closing_wait; return 0; } static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) { struct async_icount *icount; struct tty_struct *tty; unsigned long flags; dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr); if (msr & TI_MSR_DELTA_MASK) { spin_lock_irqsave(&tport->tp_lock, flags); icount = &tport->tp_icount; if (msr & TI_MSR_DELTA_CTS) icount->cts++; if (msr & TI_MSR_DELTA_DSR) icount->dsr++; if (msr & TI_MSR_DELTA_CD) icount->dcd++; if (msr & TI_MSR_DELTA_RI) icount->rng++; wake_up_interruptible(&tport->tp_port->delta_msr_wait); spin_unlock_irqrestore(&tport->tp_lock, flags); } tport->tp_msr = msr & TI_MSR_MASK; /* handle CTS flow control */ tty = tty_port_tty_get(&tport->tp_port->port); if (tty && C_CRTSCTS(tty)) { if (msr & TI_MSR_CTS) { tty->hw_stopped = 0; tty_wakeup(tty); } else { tty->hw_stopped = 1; } } tty_kref_put(tty); } static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush) { struct ti_device *tdev = tport->tp_tdev; struct usb_serial_port *port = tport->tp_port; wait_queue_t wait; spin_lock_irq(&tport->tp_lock); /* wait for data to drain from the buffer */ tdev->td_urb_error = 0; init_waitqueue_entry(&wait, current); add_wait_queue(&tport->tp_write_wait, &wait); for (;;) { set_current_state(TASK_INTERRUPTIBLE); if (kfifo_len(&tport->write_fifo) == 0 || timeout == 0 || signal_pending(current) || tdev->td_urb_error || port->serial->disconnected) /* disconnect */ break; spin_unlock_irq(&tport->tp_lock); timeout = schedule_timeout(timeout); spin_lock_irq(&tport->tp_lock); } set_current_state(TASK_RUNNING); remove_wait_queue(&tport->tp_write_wait, &wait); /* flush any remaining data in the buffer */ if (flush) kfifo_reset_out(&tport->write_fifo); spin_unlock_irq(&tport->tp_lock); mutex_lock(&port->serial->disc_mutex); /* wait for data to drain from the device */ /* wait for empty tx register, plus 20 ms */ timeout += jiffies; tport->tp_lsr &= ~TI_LSR_TX_EMPTY; while ((long)(jiffies - timeout) < 0 && !signal_pending(current) && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error && !port->serial->disconnected) { if (ti_get_lsr(tport)) break; mutex_unlock(&port->serial->disc_mutex); msleep_interruptible(20); mutex_lock(&port->serial->disc_mutex); } mutex_unlock(&port->serial->disc_mutex); } static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty) { unsigned long flags; spin_lock_irqsave(&tport->tp_lock, flags); if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) tport->tp_read_urb_state = TI_READ_URB_STOPPING; spin_unlock_irqrestore(&tport->tp_lock, flags); } static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty) { struct urb *urb; int status = 0; unsigned long flags; spin_lock_irqsave(&tport->tp_lock, flags); if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) { tport->tp_read_urb_state = TI_READ_URB_RUNNING; urb = tport->tp_port->read_urb; spin_unlock_irqrestore(&tport->tp_lock, flags); urb->context = tport; status = usb_submit_urb(urb, GFP_KERNEL); } else { tport->tp_read_urb_state = TI_READ_URB_RUNNING; spin_unlock_irqrestore(&tport->tp_lock, flags); } return status; } static int ti_command_out_sync(struct ti_device *tdev, __u8 command, __u16 moduleid, __u16 value, __u8 *data, int size) { int status; status = usb_control_msg(tdev->td_serial->dev, usb_sndctrlpipe(tdev->td_serial->dev, 0), command, (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT), value, moduleid, data, size, 1000); if (status == size) status = 0; if (status > 0) status = -ECOMM; return status; } static int ti_command_in_sync(struct ti_device *tdev, __u8 command, __u16 moduleid, __u16 value, __u8 *data, int size) { int status; status = usb_control_msg(tdev->td_serial->dev, usb_rcvctrlpipe(tdev->td_serial->dev, 0), command, (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN), value, moduleid, data, size, 1000); if (status == size) status = 0; if (status > 0) status = -ECOMM; return status; } static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, unsigned long addr, __u8 mask, __u8 byte) { int status; unsigned int size; struct ti_write_data_bytes *data; dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__, addr, mask, byte); size = sizeof(struct ti_write_data_bytes) + 2; data = kmalloc(size, GFP_KERNEL); if (!data) { dev_err(&port->dev, "%s - out of memory\n", __func__); return -ENOMEM; } data->bAddrType = TI_RW_DATA_ADDR_XDATA; data->bDataType = TI_RW_DATA_BYTE; data->bDataCounter = 1; data->wBaseAddrHi = cpu_to_be16(addr>>16); data->wBaseAddrLo = cpu_to_be16(addr); data->bData[0] = mask; data->bData[1] = byte; status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0, (__u8 *)data, size); if (status < 0) dev_err(&port->dev, "%s - failed, %d\n", __func__, status); kfree(data); return status; } static int ti_do_download(struct usb_device *dev, int pipe, u8 *buffer, int size) { int pos; u8 cs = 0; int done; struct ti_firmware_header *header; int status = 0; int len; for (pos = sizeof(struct ti_firmware_header); pos < size; pos++) cs = (__u8)(cs + buffer[pos]); header = (struct ti_firmware_header *)buffer; header->wLength = cpu_to_le16((__u16)(size - sizeof(struct ti_firmware_header))); header->bCheckSum = cs; dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__); for (pos = 0; pos < size; pos += done) { len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); status = usb_bulk_msg(dev, pipe, buffer + pos, len, &done, 1000); if (status) break; } return status; } static int ti_download_firmware(struct ti_device *tdev) { int status; int buffer_size; __u8 *buffer; struct usb_device *dev = tdev->td_serial->dev; unsigned int pipe = usb_sndbulkpipe(dev, tdev->td_serial->port[0]->bulk_out_endpointAddress); const struct firmware *fw_p; char buf[32]; /* try ID specific firmware first, then try generic firmware */ sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor, dev->descriptor.idProduct); status = request_firmware(&fw_p, buf, &dev->dev); if (status != 0) { buf[0] = '\0'; if (dev->descriptor.idVendor == MTS_VENDOR_ID) { switch (dev->descriptor.idProduct) { case MTS_CDMA_PRODUCT_ID: strcpy(buf, "mts_cdma.fw"); break; case MTS_GSM_PRODUCT_ID: strcpy(buf, "mts_gsm.fw"); break; case MTS_EDGE_PRODUCT_ID: strcpy(buf, "mts_edge.fw"); break; case MTS_MT9234MU_PRODUCT_ID: strcpy(buf, "mts_mt9234mu.fw"); break; case MTS_MT9234ZBA_PRODUCT_ID: strcpy(buf, "mts_mt9234zba.fw"); break; case MTS_MT9234ZBAOLD_PRODUCT_ID: strcpy(buf, "mts_mt9234zba.fw"); break; } } if (buf[0] == '\0') { if (tdev->td_is_3410) strcpy(buf, "ti_3410.fw"); else strcpy(buf, "ti_5052.fw"); } status = request_firmware(&fw_p, buf, &dev->dev); } if (status) { dev_err(&dev->dev, "%s - firmware not found\n", __func__); return -ENOENT; } if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size); release_firmware(fw_p); return -ENOENT; } buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header); buffer = kmalloc(buffer_size, GFP_KERNEL); if (buffer) { memcpy(buffer, fw_p->data, fw_p->size); memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size); status = ti_do_download(dev, pipe, buffer, fw_p->size); kfree(buffer); } else { dev_dbg(&dev->dev, "%s ENOMEM\n", __func__); status = -ENOMEM; } release_firmware(fw_p); if (status) { dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __func__, status); return status; } dev_dbg(&dev->dev, "%s - download successful\n", __func__); return 0; }