tests: add fdisk BSD test

Signed-off-by: Karel Zak <kzak@redhat.com>

2 files changed, 233 insertions, 0 deletions

diff --git a/tests/expected/fdisk/bsd b/tests/expected/fdisk/bsd
new file mode 100644
index 000000000..1c35f2723
--- /dev/null
+++ b/tests/expected/fdisk/bsd
@@ -0,0 +1,127 @@
+Initialize empty image
+f1c9645dbc14efddc7d8a322685f26eb bsd.img
+Create new DOS partition table
+57e721e38d1266c2df055067c18f2cf9 bsd.img
+
+---layout----------
+__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
+Units = sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk label type: dos
+Disk identifier: 0x00000001
+
+     Device Boot      Start         End      Blocks   Id  System
+-------------------
+
+Create 1st primary partition
+ada64ace122978d00d1d1c0e5ee45d26 bsd.img
+
+---layout----------
+__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
+Units = sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk label type: dos
+Disk identifier: 0x00000001
+
+     Device Boot      Start         End      Blocks   Id  System
+__ts_dev__1            2048        4095        1024   83  Linux
+-------------------
+
+Create 2st primary partition
+1bebf87248e05d6e4e62b749da65d023 bsd.img
+Set 2nd partition type
+2d8e8dff51a88a045db233418dd73fbe bsd.img
+
+---layout----------
+__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
+Units = sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk label type: dos
+Disk identifier: 0x00000001
+
+     Device Boot      Start         End      Blocks   Id  System
+__ts_dev__1            2048        4095        1024   83  Linux
+__ts_dev__2            4096       20479        8192   a5  FreeBSD
+-------------------
+
+Create default BSD
+2e1cee529cb59c9341afef0443f196a1 bsd.img
+
+---layout----------
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
+
+Command (m for help): 
+
+BSD disklabel command (m for help): 
+4 partitions:
+#       start       end      size     fstype   [fsize bsize   cpg]
+  c:     4096     20479     16384     unused        0     0       
+  d:        0     16064     16065     unused        0     0       
+
+BSD disklabel command (m for help): 
+Command (m for help): 
+-------------------
+
+b5c121c2091b2ff26b880551feac7112 bsd.img
+
+---layout----------
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
+
+Command (m for help): 
+
+BSD disklabel command (m for help): 
+4 partitions:
+#       start       end      size     fstype   [fsize bsize   cpg]
+  a:     4096      6144      2049     4.2BSD        0     0     0 
+  c:     4096     20479     16384     unused        0     0       
+  d:        0     16064     16065     unused        0     0       
+
+BSD disklabel command (m for help): 
+Command (m for help): 
+-------------------
+
+
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
+
+Command (m for help): 
+
+BSD disklabel command (m for help): 
+ 0  Empty           24  NEC DOS         81  Minix / old Lin bf  Solaris        
+ 1  FAT12           27  Hidden NTFS Win 82  Linux swap / So c1  DRDOS/sec (FAT-
+ 2  XENIX root      39  Plan 9          83  Linux           c4  DRDOS/sec (FAT-
+ 3  XENIX usr       3c  PartitionMagic  84  OS/2 hidden C:  c6  DRDOS/sec (FAT-
+ 4  FAT16 <32M      40  Venix 80286     85  Linux extended  c7  Syrinx         
+ 5  Extended        41  PPC PReP Boot   86  NTFS volume set da  Non-FS data    
+ 6  FAT16           42  SFS             87  NTFS volume set db  CP/M / CTOS / .
+ 7  HPFS/NTFS/exFAT 4d  QNX4.x          88  Linux plaintext de  Dell Utility   
+ 8  AIX             4e  QNX4.x 2nd part 8e  Linux LVM       df  BootIt         
+ 9  AIX bootable    4f  QNX4.x 3rd part 93  Amoeba          e1  DOS access     
+ a  OS/2 Boot Manag 50  OnTrack DM      94  Amoeba BBT      e3  DOS R/O        
+ b  W95 FAT32       51  OnTrack DM6 Aux 9f  BSD/OS          e4  SpeedStor      
+ c  W95 FAT32 (LBA) 52  CP/M            a0  IBM Thinkpad hi eb  BeOS fs        
+ e  W95 FAT16 (LBA) 53  OnTrack DM6 Aux a5  FreeBSD         ee  GPT            
+ f  W95 Ext'd (LBA) 54  OnTrackDM6      a6  OpenBSD         ef  EFI (FAT-12/16/
+10  OPUS            55  EZ-Drive        a7  NeXTSTEP        f0  Linux/PA-RISC b
+11  Hidden FAT12    56  Golden Bow      a8  Darwin UFS      f1  SpeedStor      
+12  Compaq diagnost 5c  Priam Edisk     a9  NetBSD          f4  SpeedStor      
+14  Hidden FAT16 <3 61  SpeedStor       ab  Darwin boot     f2  DOS secondary  
+16  Hidden FAT16    63  GNU HURD or Sys af  HFS / HFS+      fb  VMware VMFS    
+17  Hidden HPFS/NTF 64  Novell Netware  b7  BSDI fs         fc  VMware VMKCORE 
+18  AST SmartSleep  65  Novell Netware  b8  BSDI swap       fd  Linux raid auto
+1b  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid fe  LANstep        
+1c  Hidden W95 FAT3 75  PC/IX           be  Solaris boot    ff  BBT            
+1e  Hidden W95 FAT1 80  Old Minix      
+
+BSD disklabel command (m for help): 
\ No newline at end of file
diff --git a/tests/ts/fdisk/bsd b/tests/ts/fdisk/bsd
new file mode 100755
index 000000000..b9b2a0fea
--- /dev/null
+++ b/tests/ts/fdisk/bsd
@@ -0,0 +1,106 @@
+#!/bin/bash
+#
+# This file is part of util-linux.
+#
+# Copyright (C) 2013 Karel Zak <kzak@redhat.com>
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This file is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+#
+
+TS_TOPDIR="$(dirname $0)/../.."
+TS_DESC="nested BSD"
+
+. $TS_TOPDIR/functions.sh
+ts_init "$*"
+
+FDISK_CMD_CREATE_DOSLABEL="o\n"              # create dos label
+FDISK_CMD_SETID="x\ni\n0x1\nr\n"             # set non-random ID
+FDISK_CMD_WRITE_CLOSE="w\nq\n"               # write to image
+FDISK_CMD_CREATE_PRIMARY1="n\np\n1\n\n+1M\n" # 1st primary partition of size 1MiB
+FDISK_CMD_CREATE_PRIMARY2="n\np\n2\n\n\n"    # 2nd primary partition for whole of the disk
+FDISK_CMD_CHANGE_PART2TYPE="t\n2\na5\n"      # change partition type FreeBSD
+
+FDISK_CMD_BSD_CREATE="b\ny\n"                # create nested BSD PT
+FDISK_CMD_BSD_LIST="b\np\nr\nq\n"            # list nested BSD PT and quit
+FDISK_CMD_BSD_CREATE_PART="b\nn\na\n\n+1M\n" # add BSD partition 'a', size 1MiB
+FDISK_CMD_BSD_PARTTYPE="b\nt\na\n7\n"        # set partition 'a' to type 4.2BSD
+FDISK_CMD_BSD_LIST_TYPES="b\nl\nq\n"         # list supported PT types and quit
+
+#set -x 
+
+function print_layout {
+	echo -ne "\n---layout----------" >> $TS_OUTPUT
+	$TS_CMD_FDISK -l ${TEST_IMAGE_NAME} | \
+		sed 's/^.*\.img/__ts_dev__/g;
+		     s/^[[:blank:]]*Device Boot/     Device Boot/g' >> $TS_OUTPUT 2>&1
+	echo -ne   "-------------------\n\n" >> $TS_OUTPUT
+}
+
+function print_bsd_layout {
+	echo -ne "\n---layout----------" >> $TS_OUTPUT
+	echo -e "${FDISK_CMD_BSD_LIST}" | $TS_CMD_FDISK ${TEST_IMAGE_NAME} | \
+		sed 's/Reading .*//g;
+	             s/Welcome to fdisk .*//' >> $TS_OUTPUT 2>&1
+	echo -ne   "-------------------\n\n" >> $TS_OUTPUT
+}
+
+ts_log "Initialize empty image"
+TEST_IMAGE_NAME=$(ts_image_init 10)
+ts_image_md5sum >> $TS_OUTPUT 2>&1
+
+ts_log "Create new DOS partition table"
+echo -e "${FDISK_CMD_CREATE_DOSLABEL}${FDISK_CMD_SETID}${FDISK_CMD_WRITE_CLOSE}" \
+	 | $TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
+ts_image_md5sum >> $TS_OUTPUT 2>&1
+
+print_layout
+
+ts_log "Create 1st primary partition"
+echo -e "${FDISK_CMD_CREATE_PRIMARY1}${FDISK_CMD_WRITE_CLOSE}" | \
+	$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
+ts_image_md5sum >> $TS_OUTPUT 2>&1
+
+print_layout
+
+ts_log "Create 2st primary partition"
+echo -e "${FDISK_CMD_CREATE_PRIMARY2}${FDISK_CMD_WRITE_CLOSE}" | \
+	$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
+ts_image_md5sum >> $TS_OUTPUT 2>&1
+
+ts_log "Set 2nd partition type"
+echo -e "${FDISK_CMD_CHANGE_PART2TYPE}${FDISK_CMD_WRITE_CLOSE}" | \
+	$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
+ts_image_md5sum >> $TS_OUTPUT 2>&1
+
+print_layout
+
+ts_log "Create default BSD"
+echo -e "${FDISK_CMD_BSD_CREATE}${FDISK_CMD_WRITE_CLOSE}" | \
+	$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
+ts_image_md5sum >> $TS_OUTPUT 2>&1
+
+print_bsd_layout
+
+echo -e "${FDISK_CMD_BSD_CREATE_PART}${FDISK_CMD_WRITE_CLOSE}" | \
+	$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
+
+echo -e "${FDISK_CMD_BSD_PARTTYPE}${FDISK_CMD_WRITE_CLOSE}" | \
+	$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
+ts_image_md5sum >> $TS_OUTPUT 2>&1
+
+print_bsd_layout
+
+echo -e "${FDISK_CMD_BSD_LIST_TYPES}" | \
+	$TS_CMD_FDISK ${TEST_IMAGE_NAME} | \
+	sed 's/Reading .*//g; s/Welcome to fdisk .*//' >> $TS_OUTPUT 2>&1
+
+ts_finalize