From 42eb213e280eacc5714fa818cf0709923abd48e6 Mon Sep 17 00:00:00 2001 From: Sami Kerola Date: Sun, 30 Oct 2011 16:25:16 +0100 Subject: docs: add long options to tunelp.8 Signed-off-by: Sami Kerola --- sys-utils/tunelp.8 | 45 +++++++++++++-------------------------------- 1 file changed, 13 insertions(+), 32 deletions(-) (limited to 'sys-utils/tunelp.8') diff --git a/sys-utils/tunelp.8 b/sys-utils/tunelp.8 index 8a7049beb..5704e36d4 100644 --- a/sys-utils/tunelp.8 +++ b/sys-utils/tunelp.8 @@ -5,32 +5,13 @@ .\" Public license for conditions under which this file may be redistributed. .\" .\" Polished a bit - aeb -.TH TUNELP 8 "May 1999" "util-linux" "System Administration" +.TH TUNELP 8 "October 2011" "util-linux" "System Administration" .SH NAME tunelp \- set various parameters for the lp device .SH SYNOPSIS .B tunelp +[options] .I device -.RB [ \-i -.IR IRQ ] -.RB [ \-t -.IR TIME ] -.RB [ \-c -.IR CHARS ] -.RB [ \-w -.IR WAIT ] -.RB [ \-a -.RB { on | off }] -.RB [ \-o -.RB { on | off }] -.RB [ \-C -.RB { on | off }] -.RB [ \-r ] -.RB [ \-s ] -.RB [ \-q -.RB { on | off }] -.RB [ \-T -.RB { on | off }] .SH DESCRIPTION \fBtunelp\fP sets several parameters for the /dev/lp\fI?\fP devices, for better performance (or for any performance at all, if your printer won't work @@ -39,7 +20,7 @@ interrupts, and if so, which one. With parameters, it sets the device characteristics accordingly. The parameters are as follows: .TP -.BI \-i " IRQ" +\fB\-i\fR, \fB\-\-irq\fR \fIargument\fR specifies the IRQ to use for the parallel port in question. If this is set to something non-zero, \-t and \-c have no effect. If your port does not use interrupts, this option will make printing stop. @@ -59,7 +40,7 @@ Read for more details on parport. .TP -.BI \-t " TIME" +\fB\-t\fR, \fB\-\-time\fR \fImilliseconds\fR is the amount of time in jiffies that the driver waits if the printer doesn't take a character for the number of tries dictated by the \-c parameter. 10 is the default value. If you want fastest @@ -71,7 +52,7 @@ should be lower for printing graphics than text, by a factor of approximately 10, for best performance. .TP -.BI \-c " CHARS" +\fB\-c\fR, \fB\-\-chars\fR \fIcharacters\fR is the number of times to try to output a character to the printer before sleeping for \-t \fITIME\fP. It is the number of times around a loop that tries to send a character to the printer. 120 appears to @@ -86,7 +67,7 @@ Setting \-t \fITIME\fP to 0 is equivalent to setting \-c \fICHARS\fP to infinity. .TP -.BI \-w " WAIT" +\fB\-w\fR, \fB\-\-wait\fR \fImilliseconds\fR is the number of usec we wait while playing with the strobe signal. While most printers appear to be able to deal with an extremely short strobe, some printers demand a longer one. Increasing this from @@ -95,7 +76,7 @@ make it possible to use longer cables. It's also possible to decrease this value to 0 if your printer is fast enough or your machine is slow enough. .TP -.BR \-a " {" on | off } +\fB\-a\fR, \fB\-\-abort\fR \fI\fR This is whether to abort on printer error - the default is not to. If you are sitting at your computer, you probably want to be able to see an error and fix it, and have the printer go on @@ -104,7 +85,7 @@ your printer spooler find out that the printer isn't ready, quit trying, and send you mail about it. The choice is yours. .TP -.BR \-o " {" on | off } +\fB\-o\fR, \fB\-\-check\-status\fR \fI\fR This option is much like \-a. It makes any .I open() of this device check to see that the device is on-line and not reporting any @@ -112,7 +93,7 @@ out of paper or other errors. This is the correct setting for most versions of lpd. .TP -.BR \-C " {" on | off } +\fB\-C\fR, \fB\-\-careful\fR \fI\fR This option adds extra ("careful") error checking. When this option is on, the printer driver will ensure that the printer is on-line and not reporting any out of paper or other errors before @@ -123,14 +104,14 @@ NOTE: This option is obsolete because it's the default in 2.1.131 kernel or later. .TP -.B \-s +\fB\-s\fR, \fB\-\-status\fR This option returns the current printer status, both as a decimal number from 0..255, and as a list of active flags. When this option is specified, \-q off, turning off the display of the current IRQ, is implied. .TP -.BR \-T " {" on | off } +\fB\-T\fR, \fB\-\-trust\-irq\fR \fI\fR This option is obsolete. It was added in Linux 2.1.131, and removed again in Linux 2.3.10. The below is for these old kernels only. @@ -150,12 +131,12 @@ NOTE: Trusting the irq is reported to corrupt the printing on some hardware, you must try to know if your printer will work or not... .TP -.B \-r +\fB\-r\fR, \fB\-\-reset\fR This option resets the port. It requires a Linux kernel version of 1.1.80 or later. .TP -.BR \-q " {" on | off } +\fB\-q\fR, \fB\-\-print-irq\fR \fI\fR This option sets printing the display of the current IRQ setting. -- cgit v1.2.3-55-g7522