/*
* ARMV7M System emulation.
*
* Copyright (c) 2006-2007 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GPL.
*/
#include "qemu/osdep.h"
#include "hw/arm/armv7m.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "hw/sysbus.h"
#include "hw/arm/arm.h"
#include "hw/loader.h"
#include "elf.h"
#include "sysemu/qtest.h"
#include "qemu/error-report.h"
#include "exec/address-spaces.h"
/* Bitbanded IO. Each word corresponds to a single bit. */
/* Get the byte address of the real memory for a bitband access. */
static inline hwaddr bitband_addr(BitBandState *s, hwaddr offset)
{
return s->base | (offset & 0x1ffffff) >> 5;
}
static MemTxResult bitband_read(void *opaque, hwaddr offset,
uint64_t *data, unsigned size, MemTxAttrs attrs)
{
BitBandState *s = opaque;
uint8_t buf[4];
MemTxResult res;
int bitpos, bit;
hwaddr addr;
assert(size <= 4);
/* Find address in underlying memory and round down to multiple of size */
addr = bitband_addr(s, offset) & (-size);
res = address_space_read(s->source_as, addr, attrs, buf, size);
if (res) {
return res;
}
/* Bit position in the N bytes read... */
bitpos = (offset >> 2) & ((size * 8) - 1);
/* ...converted to byte in buffer and bit in byte */
bit = (buf[bitpos >> 3] >> (bitpos & 7)) & 1;
*data = bit;
return MEMTX_OK;
}
static MemTxResult bitband_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size, MemTxAttrs attrs)
{
BitBandState *s = opaque;
uint8_t buf[4];
MemTxResult res;
int bitpos, bit;
hwaddr addr;
assert(size <= 4);
/* Find address in underlying memory and round down to multiple of size */
addr = bitband_addr(s, offset) & (-size);
res = address_space_read(s->source_as, addr, attrs, buf, size);
if (res) {
return res;
}
/* Bit position in the N bytes read... */
bitpos = (offset >> 2) & ((size * 8) - 1);
/* ...converted to byte in buffer and bit in byte */
bit = 1 << (bitpos & 7);
if (value & 1) {
buf[bitpos >> 3] |= bit;
} else {
buf[bitpos >> 3] &= ~bit;
}
return address_space_write(s->source_as, addr, attrs, buf, size);
}
static const MemoryRegionOps bitband_ops = {
.read_with_attrs = bitband_read,
.write_with_attrs = bitband_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.impl.min_access_size = 1,
.impl.max_access_size = 4,
.valid.min_access_size = 1,
.valid.max_access_size = 4,
};
static void bitband_init(Object *obj)
{
BitBandState *s = BITBAND(obj);
SysBusDevice *dev = SYS_BUS_DEVICE(obj);
memory_region_init_io(&s->iomem, obj, &bitband_ops, s,
"bitband", 0x02000000);
sysbus_init_mmio(dev, &s->iomem);
}
static void bitband_realize(DeviceState *dev, Error **errp)
{
BitBandState *s = BITBAND(dev);
if (!s->source_memory) {
error_setg(errp, "source-memory property not set");
return;
}
s->source_as = address_space_init_shareable(s->source_memory,
"bitband-source");
}
/* Board init. */
static const hwaddr bitband_input_addr[ARMV7M_NUM_BITBANDS] = {
0x20000000, 0x40000000
};
static const hwaddr bitband_output_addr[ARMV7M_NUM_BITBANDS] = {
0x22000000, 0x42000000
};
static void armv7m_instance_init(Object *obj)
{
ARMv7MState *s = ARMV7M(obj);
int i;
/* Can't init the cpu here, we don't yet know which model to use */
object_property_add_link(obj, "memory",
TYPE_MEMORY_REGION,
(Object **)&s->board_memory,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
memory_region_init(&s->container, obj, "armv7m-container", UINT64_MAX);
object_initialize(&s->nvic, sizeof(s->nvic), TYPE_NVIC);
qdev_set_parent_bus(DEVICE(&s->nvic), sysbus_get_default());
object_property_add_alias(obj, "num-irq",
OBJECT(&s->nvic), "num-irq", &error_abort);
for (i = 0; i < ARRAY_SIZE(s->bitband); i++) {
object_initialize(&s->bitband[i], sizeof(s->bitband[i]), TYPE_BITBAND);
qdev_set_parent_bus(DEVICE(&s->bitband[i]), sysbus_get_default());
}
}
static void armv7m_realize(DeviceState *dev, Error **errp)
{
ARMv7MState *s = ARMV7M(dev);
SysBusDevice *sbd;
Error *err = NULL;
int i;
char **cpustr;
ObjectClass *oc;
const char *typename;
CPUClass *cc;
if (!s->board_memory) {
error_setg(errp, "memory property was not set");
return;
}
memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1);
cpustr = g_strsplit(s->cpu_model, ",", 2);
oc = cpu_class_by_name(TYPE_ARM_CPU, cpustr[0]);
if (!oc) {
error_setg(errp, "Unknown CPU model %s", cpustr[0]);
g_strfreev(cpustr);
return;
}
cc = CPU_CLASS(oc);
typename = object_class_get_name(oc);
cc->parse_features(typename, cpustr[1], &err);
g_strfreev(cpustr);
if (err) {
error_propagate(errp, err);
return;
}
s->cpu = ARM_CPU(object_new(typename));
if (!s->cpu) {
error_setg(errp, "Unknown CPU model %s", s->cpu_model);
return;
}
object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory",
&error_abort);
object_property_set_bool(OBJECT(s->cpu), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
/* Note that we must realize the NVIC after the CPU */
object_property_set_bool(OBJECT(&s->nvic), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
/* Alias the NVIC's input and output GPIOs as our own so the board
* code can wire them up. (We do this in realize because the
* NVIC doesn't create the input GPIO array until realize.)
*/
qdev_pass_gpios(DEVICE(&s->nvic), dev, NULL);
qdev_pass_gpios(DEVICE(&s->nvic), dev, "SYSRESETREQ");
/* Wire the NVIC up to the CPU */
sbd = SYS_BUS_DEVICE(&s->nvic);
sysbus_connect_irq(sbd, 0,
qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ));
s->cpu->env.nvic = &s->nvic;
memory_region_add_subregion(&s->container, 0xe000e000,
sysbus_mmio_get_region(sbd, 0));
for (i = 0; i < ARRAY_SIZE(s->bitband); i++) {
Object *obj = OBJECT(&s->bitband[i]);
SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]);
object_property_set_int(obj, bitband_input_addr[i], "base", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
object_property_set_link(obj, OBJECT(s->board_memory),
"source-memory", &error_abort);
object_property_set_bool(obj, true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(&s->container, bitband_output_addr[i],
sysbus_mmio_get_region(sbd, 0));
}
}
static Property armv7m_properties[] = {
DEFINE_PROP_STRING("cpu-model", ARMv7MState, cpu_model),
DEFINE_PROP_END_OF_LIST(),
};
static void armv7m_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = armv7m_realize;
dc->props = armv7m_properties;
}
static const TypeInfo armv7m_info = {
.name = TYPE_ARMV7M,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(ARMv7MState),
.instance_init = armv7m_instance_init,
.class_init = armv7m_class_init,
};
static void armv7m_reset(void *opaque)
{
ARMCPU *cpu = opaque;
cpu_reset(CPU(cpu));
}
/* Init CPU and memory for a v7-M based board.
mem_size is in bytes.
Returns the ARMv7M device. */
DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq,
const char *kernel_filename, const char *cpu_model)
{
DeviceState *armv7m;
if (cpu_model == NULL) {
cpu_model = "cortex-m3";
}
armv7m = qdev_create(NULL, TYPE_ARMV7M);
qdev_prop_set_uint32(armv7m, "num-irq", num_irq);
qdev_prop_set_string(armv7m, "cpu-model", cpu_model);
object_property_set_link(OBJECT(armv7m), OBJECT(get_system_memory()),
"memory", &error_abort);
/* This will exit with an error if the user passed us a bad cpu_model */
qdev_init_nofail(armv7m);
armv7m_load_kernel(ARM_CPU(first_cpu), kernel_filename, mem_size);
return armv7m;
}
void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size)
{
int image_size;
uint64_t entry;
uint64_t lowaddr;
int big_endian;
#ifdef TARGET_WORDS_BIGENDIAN
big_endian = 1;
#else
big_endian = 0;
#endif
if (!kernel_filename && !qtest_enabled()) {
fprintf(stderr, "Guest image must be specified (using -kernel)\n");
exit(1);
}
if (kernel_filename) {
image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr,
NULL, big_endian, EM_ARM, 1, 0);
if (image_size < 0) {
image_size = load_image_targphys(kernel_filename, 0, mem_size);
lowaddr = 0;
}
if (image_size < 0) {
error_report("Could not load kernel '%s'", kernel_filename);
exit(1);
}
}
/* CPU objects (unlike devices) are not automatically reset on system
* reset, so we must always register a handler to do so. Unlike
* A-profile CPUs, we don't need to do anything special in the
* handler to arrange that it starts correctly.
* This is arguably the wrong place to do this, but it matches the
* way A-profile does it. Note that this means that every M profile
* board must call this function!
*/
qemu_register_reset(armv7m_reset, cpu);
}
static Property bitband_properties[] = {
DEFINE_PROP_UINT32("base", BitBandState, base, 0),
DEFINE_PROP_LINK("source-memory", BitBandState, source_memory,
TYPE_MEMORY_REGION, MemoryRegion *),
DEFINE_PROP_END_OF_LIST(),
};
static void bitband_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = bitband_realize;
dc->props = bitband_properties;
}
static const TypeInfo bitband_info = {
.name = TYPE_BITBAND,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(BitBandState),
.instance_init = bitband_init,
.class_init = bitband_class_init,
};
static void armv7m_register_types(void)
{
type_register_static(&bitband_info);
type_register_static(&armv7m_info);
}
type_init(armv7m_register_types)
